source: MondoRescue/branches/3.2/mindi-busybox/procps/sysctl.c

Last change on this file was 3232, checked in by Bruno Cornec, 10 years ago
  • Update mindi-busybox to 1.21.1
File size: 7.0 KB
Line 
1/* vi: set sw=4 ts=4: */
2/*
3 * Sysctl 1.01 - A utility to read and manipulate the sysctl parameters
4 *
5 * Copyright 1999 George Staikos
6 *
7 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
8 *
9 * Changelog:
10 * v1.01 - added -p <preload> to preload values from a file
11 * v1.01.1 - busybox applet aware by <solar@gentoo.org>
12 */
13
14//usage:#define sysctl_trivial_usage
15//usage: "[OPTIONS] [KEY[=VALUE]]..."
16//usage:#define sysctl_full_usage "\n\n"
17//usage: "Show/set kernel parameters\n"
18//usage: "\n -e Don't warn about unknown keys"
19//usage: "\n -n Don't show key names"
20//usage: "\n -a Show all values"
21/* Same as -a, no need to show it */
22/* //usage: "\n -A Show all values in table form" */
23//usage: "\n -w Set values"
24//usage: "\n -p FILE Set values from FILE (default /etc/sysctl.conf)"
25//usage: "\n -q Set values silently"
26//usage:
27//usage:#define sysctl_example_usage
28//usage: "sysctl [-n] [-e] variable...\n"
29//usage: "sysctl [-n] [-e] [-q] -w variable=value...\n"
30//usage: "sysctl [-n] [-e] -a\n"
31//usage: "sysctl [-n] [-e] [-q] -p file (default /etc/sysctl.conf)\n"
32//usage: "sysctl [-n] [-e] -A\n"
33
34#include "libbb.h"
35
36enum {
37 FLAG_SHOW_KEYS = 1 << 0,
38 FLAG_SHOW_KEY_ERRORS = 1 << 1,
39 FLAG_TABLE_FORMAT = 1 << 2, /* not implemented */
40 FLAG_SHOW_ALL = 1 << 3,
41 FLAG_PRELOAD_FILE = 1 << 4,
42/* TODO: procps 3.2.8 seems to not require -w for KEY=VAL to work: */
43 FLAG_WRITE = 1 << 5,
44 FLAG_QUIET = 1 << 6,
45};
46#define OPTION_STR "neAapwq"
47
48static void sysctl_dots_to_slashes(char *name)
49{
50 char *cptr, *last_good, *end;
51
52 /* Convert minimum number of '.' to '/' so that
53 * we end up with existing file's name.
54 *
55 * Example from bug 3894:
56 * net.ipv4.conf.eth0.100.mc_forwarding ->
57 * net/ipv4/conf/eth0.100/mc_forwarding
58 * NB: net/ipv4/conf/eth0/mc_forwarding *also exists*,
59 * therefore we must start from the end, and if
60 * we replaced even one . -> /, start over again,
61 * but never replace dots before the position
62 * where last replacement occurred.
63 *
64 * Another bug we later had is that
65 * net.ipv4.conf.eth0.100
66 * (without .mc_forwarding) was mishandled.
67 *
68 * To set up testing: modprobe 8021q; vconfig add eth0 100
69 */
70 end = name + strlen(name);
71 last_good = name - 1;
72 *end = '.'; /* trick the loop into trying full name too */
73
74 again:
75 cptr = end;
76 while (cptr > last_good) {
77 if (*cptr == '.') {
78 *cptr = '\0';
79 //bb_error_msg("trying:'%s'", name);
80 if (access(name, F_OK) == 0) {
81 *cptr = '/';
82 //bb_error_msg("replaced:'%s'", name);
83 last_good = cptr;
84 goto again;
85 }
86 *cptr = '.';
87 }
88 cptr--;
89 }
90 *end = '\0';
91}
92
93static int sysctl_act_on_setting(char *setting)
94{
95 int fd, retval = EXIT_SUCCESS;
96 char *cptr, *outname;
97 char *value = value; /* for compiler */
98
99 outname = xstrdup(setting);
100
101 cptr = outname;
102 while (*cptr) {
103 if (*cptr == '/')
104 *cptr = '.';
105 cptr++;
106 }
107
108 if (option_mask32 & FLAG_WRITE) {
109 cptr = strchr(setting, '=');
110 if (cptr == NULL) {
111 bb_error_msg("error: '%s' must be of the form name=value",
112 outname);
113 retval = EXIT_FAILURE;
114 goto end;
115 }
116 value = cptr + 1; /* point to the value in name=value */
117 if (setting == cptr || !*value) {
118 bb_error_msg("error: malformed setting '%s'", outname);
119 retval = EXIT_FAILURE;
120 goto end;
121 }
122 *cptr = '\0';
123 outname[cptr - setting] = '\0';
124 /* procps 3.2.7 actually uses these flags */
125 fd = open(setting, O_WRONLY|O_CREAT|O_TRUNC, 0666);
126 } else {
127 fd = open(setting, O_RDONLY);
128 }
129
130 if (fd < 0) {
131 switch (errno) {
132 case ENOENT:
133 if (option_mask32 & FLAG_SHOW_KEY_ERRORS)
134 bb_error_msg("error: '%s' is an unknown key", outname);
135 break;
136 default:
137 bb_perror_msg("error %sing key '%s'",
138 option_mask32 & FLAG_WRITE ?
139 "sett" : "read",
140 outname);
141 break;
142 }
143 retval = EXIT_FAILURE;
144 goto end;
145 }
146
147 if (option_mask32 & FLAG_WRITE) {
148//TODO: procps 3.2.7 writes "value\n", note trailing "\n"
149 xwrite_str(fd, value);
150 close(fd);
151 if (!(option_mask32 & FLAG_QUIET)) {
152 if (option_mask32 & FLAG_SHOW_KEYS)
153 printf("%s = ", outname);
154 puts(value);
155 }
156 } else {
157 char c;
158
159 value = cptr = xmalloc_read(fd, NULL);
160 close(fd);
161 if (value == NULL) {
162 bb_perror_msg("error reading key '%s'", outname);
163 goto end;
164 }
165
166 /* dev.cdrom.info and sunrpc.transports, for example,
167 * are multi-line. Try "sysctl sunrpc.transports"
168 */
169 while ((c = *cptr) != '\0') {
170 if (option_mask32 & FLAG_SHOW_KEYS)
171 printf("%s = ", outname);
172 while (1) {
173 fputc(c, stdout);
174 cptr++;
175 if (c == '\n')
176 break;
177 c = *cptr;
178 if (c == '\0')
179 break;
180 }
181 }
182 free(value);
183 }
184 end:
185 free(outname);
186 return retval;
187}
188
189static int sysctl_act_recursive(const char *path)
190{
191 DIR *dirp;
192 struct stat buf;
193 struct dirent *entry;
194 char *next;
195 int retval = 0;
196
197 stat(path, &buf);
198 if (S_ISDIR(buf.st_mode) && !(option_mask32 & FLAG_WRITE)) {
199 dirp = opendir(path);
200 if (dirp == NULL)
201 return -1;
202 while ((entry = readdir(dirp)) != NULL) {
203 next = concat_subpath_file(path, entry->d_name);
204 if (next == NULL)
205 continue; /* d_name is "." or ".." */
206 /* if path was ".", drop "./" prefix: */
207 retval |= sysctl_act_recursive((next[0] == '.' && next[1] == '/') ?
208 next + 2 : next);
209 free(next);
210 }
211 closedir(dirp);
212 } else {
213 char *name = xstrdup(path);
214 retval |= sysctl_act_on_setting(name);
215 free(name);
216 }
217
218 return retval;
219}
220
221/* Set sysctl's from a conf file. Format example:
222 * # Controls IP packet forwarding
223 * net.ipv4.ip_forward = 0
224 */
225static int sysctl_handle_preload_file(const char *filename)
226{
227 char *token[2];
228 parser_t *parser;
229
230 parser = config_open(filename);
231 /* Must do it _after_ config_open(): */
232 xchdir("/proc/sys");
233 /* xchroot("/proc/sys") - if you are paranoid */
234
235//TODO: ';' is comment char too
236//TODO: comment may be only at line start. "var=1 #abc" - "1 #abc" is the value
237// (but _whitespace_ from ends should be trimmed first (and we do it right))
238//TODO: "var==1" is mishandled (must use "=1" as a value, but uses "1")
239// can it be fixed by removing PARSE_COLLAPSE bit?
240 while (config_read(parser, token, 2, 2, "# \t=", PARSE_NORMAL)) {
241 char *tp;
242 sysctl_dots_to_slashes(token[0]);
243 tp = xasprintf("%s=%s", token[0], token[1]);
244 sysctl_act_recursive(tp);
245 free(tp);
246 }
247 if (ENABLE_FEATURE_CLEAN_UP)
248 config_close(parser);
249 return 0;
250}
251
252int sysctl_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
253int sysctl_main(int argc UNUSED_PARAM, char **argv)
254{
255 int retval;
256 int opt;
257
258 opt = getopt32(argv, "+" OPTION_STR); /* '+' - stop on first non-option */
259 argv += optind;
260 opt ^= (FLAG_SHOW_KEYS | FLAG_SHOW_KEY_ERRORS);
261 option_mask32 = opt;
262
263 if (opt & FLAG_PRELOAD_FILE) {
264 option_mask32 |= FLAG_WRITE;
265 /* xchdir("/proc/sys") is inside */
266 return sysctl_handle_preload_file(*argv ? *argv : "/etc/sysctl.conf");
267 }
268 xchdir("/proc/sys");
269 /* xchroot("/proc/sys") - if you are paranoid */
270 if (opt & (FLAG_TABLE_FORMAT | FLAG_SHOW_ALL)) {
271 return sysctl_act_recursive(".");
272 }
273
274 retval = 0;
275 while (*argv) {
276 sysctl_dots_to_slashes(*argv);
277 retval |= sysctl_act_recursive(*argv);
278 argv++;
279 }
280
281 return retval;
282}
Note: See TracBrowser for help on using the repository browser.