source: MondoRescue/branches/3.2/mindi-busybox/networking/nameif.c

Last change on this file was 3232, checked in by Bruno Cornec, 10 years ago
  • Update mindi-busybox to 1.21.1
File size: 9.6 KB
Line 
1/* vi: set sw=4 ts=4: */
2/*
3 * nameif.c - Naming Interfaces based on MAC address for busybox.
4 *
5 * Written 2000 by Andi Kleen.
6 * Busybox port 2002 by Nick Fedchik <nick@fedchik.org.ua>
7 * Glenn McGrath
8 * Extended matching support 2008 by Nico Erfurth <masta@perlgolf.de>
9 *
10 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
11 */
12
13//config:config NAMEIF
14//config: bool "nameif"
15//config: default y
16//config: select PLATFORM_LINUX
17//config: select FEATURE_SYSLOG
18//config: help
19//config: nameif is used to rename network interface by its MAC address.
20//config: Renamed interfaces MUST be in the down state.
21//config: It is possible to use a file (default: /etc/mactab)
22//config: with list of new interface names and MACs.
23//config: Maximum interface name length: IFNAMSIZ = 16
24//config: File fields are separated by space or tab.
25//config: File format:
26//config: # Comment
27//config: new_interface_name XX:XX:XX:XX:XX:XX
28//config:
29//config:config FEATURE_NAMEIF_EXTENDED
30//config: bool "Extended nameif"
31//config: default y
32//config: depends on NAMEIF
33//config: help
34//config: This extends the nameif syntax to support the bus_info, driver,
35//config: phyaddr selectors. The syntax is compatible to the normal nameif.
36//config: File format:
37//config: new_interface_name driver=asix bus=usb-0000:00:08.2-3
38//config: new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
39//config: new_interface_name phy_address=2 00:80:C8:38:91:B5
40//config: new_interface_name mac=00:80:C8:38:91:B5
41//config: new_interface_name 00:80:C8:38:91:B5
42
43//usage:#define nameif_trivial_usage
44//usage: IF_NOT_FEATURE_NAMEIF_EXTENDED(
45//usage: "[-s] [-c FILE] [IFNAME HWADDR]..."
46//usage: )
47//usage: IF_FEATURE_NAMEIF_EXTENDED(
48//usage: "[-s] [-c FILE] [IFNAME SELECTOR]..."
49//usage: )
50//usage:#define nameif_full_usage "\n\n"
51//usage: "Rename network interface while it in the down state."
52//usage: IF_NOT_FEATURE_NAMEIF_EXTENDED(
53//usage: "\nThe device with address HWADDR is renamed to IFACE."
54//usage: )
55//usage: IF_FEATURE_NAMEIF_EXTENDED(
56//usage: "\nThe device matched by SELECTOR is renamed to IFACE."
57//usage: "\nSELECTOR can be a combination of:"
58//usage: "\n driver=STRING"
59//usage: "\n bus=STRING"
60//usage: "\n phy_address=NUM"
61//usage: "\n [mac=]XX:XX:XX:XX:XX:XX"
62//usage: )
63//usage: "\n"
64//usage: "\n -c FILE Configuration file (default: /etc/mactab)"
65//usage: "\n -s Log to syslog"
66//usage:
67//usage:#define nameif_example_usage
68//usage: "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n"
69//usage: " or\n"
70//usage: "$ nameif -c /etc/my_mactab_file\n"
71
72#include "libbb.h"
73#include <syslog.h>
74#include <net/if.h>
75#include <netinet/ether.h>
76#include <linux/sockios.h>
77
78#ifndef IFNAMSIZ
79#define IFNAMSIZ 16
80#endif
81
82/* Taken from linux/sockios.h */
83#define SIOCSIFNAME 0x8923 /* set interface name */
84
85/* Octets in one Ethernet addr, from <linux/if_ether.h> */
86#define ETH_ALEN 6
87
88#ifndef ifr_newname
89#define ifr_newname ifr_ifru.ifru_slave
90#endif
91
92typedef struct ethtable_s {
93 struct ethtable_s *next;
94 struct ethtable_s *prev;
95 char *ifname;
96 struct ether_addr *mac;
97#if ENABLE_FEATURE_NAMEIF_EXTENDED
98 char *bus_info;
99 char *driver;
100 int32_t phy_address;
101#endif
102} ethtable_t;
103
104#if ENABLE_FEATURE_NAMEIF_EXTENDED
105/* Cut'n'paste from ethtool.h */
106#define ETHTOOL_BUSINFO_LEN 32
107/* these strings are set to whatever the driver author decides... */
108struct ethtool_drvinfo {
109 uint32_t cmd;
110 char driver[32]; /* driver short name, "tulip", "eepro100" */
111 char version[32]; /* driver version string */
112 char fw_version[32]; /* firmware version string, if applicable */
113 char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
114 /* For PCI devices, use pci_dev->slot_name. */
115 char reserved1[32];
116 char reserved2[16];
117 uint32_t n_stats; /* number of u64's from ETHTOOL_GSTATS */
118 uint32_t testinfo_len;
119 uint32_t eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
120 uint32_t regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
121};
122
123struct ethtool_cmd {
124 uint32_t cmd;
125 uint32_t supported; /* Features this interface supports */
126 uint32_t advertising; /* Features this interface advertises */
127 uint16_t speed; /* The forced speed, 10Mb, 100Mb, gigabit */
128 uint8_t duplex; /* Duplex, half or full */
129 uint8_t port; /* Which connector port */
130 uint8_t phy_address;
131 uint8_t transceiver; /* Which transceiver to use */
132 uint8_t autoneg; /* Enable or disable autonegotiation */
133 uint32_t maxtxpkt; /* Tx pkts before generating tx int */
134 uint32_t maxrxpkt; /* Rx pkts before generating rx int */
135 uint16_t speed_hi;
136 uint16_t reserved2;
137 uint32_t reserved[3];
138};
139
140#define ETHTOOL_GSET 0x00000001 /* Get settings. */
141#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
142#endif
143
144
145static void nameif_parse_selector(ethtable_t *ch, char *selector)
146{
147 struct ether_addr *lmac;
148#if ENABLE_FEATURE_NAMEIF_EXTENDED
149 int found_selector = 0;
150
151 while (*selector) {
152 char *next;
153#endif
154 selector = skip_whitespace(selector);
155#if ENABLE_FEATURE_NAMEIF_EXTENDED
156 ch->phy_address = -1;
157 if (*selector == '\0')
158 break;
159 /* Search for the end .... */
160 next = skip_non_whitespace(selector);
161 if (*next)
162 *next++ = '\0';
163 /* Check for selectors, mac= is assumed */
164 if (strncmp(selector, "bus=", 4) == 0) {
165 ch->bus_info = xstrdup(selector + 4);
166 found_selector++;
167 } else if (strncmp(selector, "driver=", 7) == 0) {
168 ch->driver = xstrdup(selector + 7);
169 found_selector++;
170 } else if (strncmp(selector, "phyaddr=", 8) == 0) {
171 ch->phy_address = xatoi_positive(selector + 8);
172 found_selector++;
173 } else {
174#endif
175 lmac = xmalloc(ETH_ALEN);
176 ch->mac = ether_aton_r(selector + (strncmp(selector, "mac=", 4) != 0 ? 0 : 4), lmac);
177 if (ch->mac == NULL)
178 bb_error_msg_and_die("can't parse %s", selector);
179#if ENABLE_FEATURE_NAMEIF_EXTENDED
180 found_selector++;
181 };
182 selector = next;
183 }
184 if (found_selector == 0)
185 bb_error_msg_and_die("no selectors found for %s", ch->ifname);
186#endif
187}
188
189static void prepend_new_eth_table(ethtable_t **clist, char *ifname, char *selector)
190{
191 ethtable_t *ch;
192 if (strlen(ifname) >= IFNAMSIZ)
193 bb_error_msg_and_die("interface name '%s' too long", ifname);
194 ch = xzalloc(sizeof(*ch));
195 ch->ifname = xstrdup(ifname);
196 nameif_parse_selector(ch, selector);
197 ch->next = *clist;
198 if (*clist)
199 (*clist)->prev = ch;
200 *clist = ch;
201}
202
203#if ENABLE_FEATURE_CLEAN_UP
204static void delete_eth_table(ethtable_t *ch)
205{
206 free(ch->ifname);
207#if ENABLE_FEATURE_NAMEIF_EXTENDED
208 free(ch->bus_info);
209 free(ch->driver);
210#endif
211 free(ch->mac);
212 free(ch);
213};
214#else
215void delete_eth_table(ethtable_t *ch);
216#endif
217
218int nameif_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
219int nameif_main(int argc UNUSED_PARAM, char **argv)
220{
221 ethtable_t *clist = NULL;
222 const char *fname = "/etc/mactab";
223 int ctl_sk;
224 ethtable_t *ch;
225 parser_t *parser;
226 char *token[2];
227
228 if (1 & getopt32(argv, "sc:", &fname)) {
229 openlog(applet_name, 0, LOG_LOCAL0);
230 /* Why not just "="? I assume logging to stderr
231 * can't hurt. 2>/dev/null if you don't like it: */
232 logmode |= LOGMODE_SYSLOG;
233 }
234 argv += optind;
235
236 if (argv[0]) {
237 do {
238 if (!argv[1])
239 bb_show_usage();
240 prepend_new_eth_table(&clist, argv[0], argv[1]);
241 argv += 2;
242 } while (*argv);
243 } else {
244 parser = config_open(fname);
245 while (config_read(parser, token, 2, 2, "# \t", PARSE_NORMAL))
246 prepend_new_eth_table(&clist, token[0], token[1]);
247 config_close(parser);
248 }
249
250 ctl_sk = xsocket(PF_INET, SOCK_DGRAM, 0);
251 parser = config_open2("/proc/net/dev", xfopen_for_read);
252
253 while (clist && config_read(parser, token, 2, 2, "\0: \t", PARSE_NORMAL)) {
254 struct ifreq ifr;
255#if ENABLE_FEATURE_NAMEIF_EXTENDED
256 struct ethtool_drvinfo drvinfo;
257 struct ethtool_cmd eth_settings;
258#endif
259 if (parser->lineno <= 2)
260 continue; /* Skip the first two lines */
261
262 /* Find the current interface name and copy it to ifr.ifr_name */
263 memset(&ifr, 0, sizeof(struct ifreq));
264 strncpy_IFNAMSIZ(ifr.ifr_name, token[0]);
265
266#if ENABLE_FEATURE_NAMEIF_EXTENDED
267 /* Check for phy address */
268 memset(&eth_settings, 0, sizeof(eth_settings));
269 eth_settings.cmd = ETHTOOL_GSET;
270 ifr.ifr_data = (caddr_t) &eth_settings;
271 ioctl(ctl_sk, SIOCETHTOOL, &ifr);
272
273 /* Check for driver etc. */
274 memset(&drvinfo, 0, sizeof(drvinfo));
275 drvinfo.cmd = ETHTOOL_GDRVINFO;
276 ifr.ifr_data = (caddr_t) &drvinfo;
277 /* Get driver and businfo first, so we have it in drvinfo */
278 ioctl(ctl_sk, SIOCETHTOOL, &ifr);
279#endif
280 ioctl(ctl_sk, SIOCGIFHWADDR, &ifr);
281
282 /* Search the list for a matching device */
283 for (ch = clist; ch; ch = ch->next) {
284#if ENABLE_FEATURE_NAMEIF_EXTENDED
285 if (ch->bus_info && strcmp(ch->bus_info, drvinfo.bus_info) != 0)
286 continue;
287 if (ch->driver && strcmp(ch->driver, drvinfo.driver) != 0)
288 continue;
289 if (ch->phy_address != -1 && ch->phy_address != eth_settings.phy_address)
290 continue;
291#endif
292 if (ch->mac && memcmp(ch->mac, ifr.ifr_hwaddr.sa_data, ETH_ALEN) != 0)
293 continue;
294 /* if we came here, all selectors have matched */
295 break;
296 }
297 /* Nothing found for current interface */
298 if (!ch)
299 continue;
300
301 if (strcmp(ifr.ifr_name, ch->ifname) != 0) {
302 strcpy(ifr.ifr_newname, ch->ifname);
303 ioctl_or_perror_and_die(ctl_sk, SIOCSIFNAME, &ifr,
304 "can't change ifname %s to %s",
305 ifr.ifr_name, ch->ifname);
306 }
307 /* Remove list entry of renamed interface */
308 if (ch->prev != NULL)
309 ch->prev->next = ch->next;
310 else
311 clist = ch->next;
312 if (ch->next != NULL)
313 ch->next->prev = ch->prev;
314 if (ENABLE_FEATURE_CLEAN_UP)
315 delete_eth_table(ch);
316 }
317 if (ENABLE_FEATURE_CLEAN_UP) {
318 for (ch = clist; ch; ch = ch->next)
319 delete_eth_table(ch);
320 config_close(parser);
321 };
322
323 return 0;
324}
Note: See TracBrowser for help on using the repository browser.