source: MondoRescue/branches/3.2/mindi-busybox/e2fsprogs/old_e2fsprogs/util.c@ 3232

/* vi: set sw=4 ts=4: */
/*
 * util.c --- helper functions used by tune2fs and mke2fs
 *
 * Copyright 1995, 1996, 1997, 1998, 1999, 2000 by Theodore Ts'o.
 *
 * Licensed under GPLv2, see file LICENSE in this source tree.
 */

#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <linux/major.h>
#include <sys/stat.h>

#include "e2fsbb.h"
#include "e2p/e2p.h"
#include "ext2fs/ext2_fs.h"
#include "ext2fs/ext2fs.h"
#include "blkid/blkid.h"
#include "util.h"

void proceed_question(void)
{
    fputs("Proceed anyway? (y,n) ", stdout);
    if (bb_ask_confirmation() == 0)
        exit(1);
}

void check_plausibility(const char *device, int force)
{
    int val;
    struct stat s;
    val = stat(device, &s);
    if (force)
        return;
    if (val == -1)
        bb_perror_msg_and_die("can't stat '%s'", device);
    if (!S_ISBLK(s.st_mode)) {
        printf("%s is not a block special device.\n", device);
        proceed_question();
        return;
    }

#ifdef HAVE_LINUX_MAJOR_H
#ifndef MAJOR
#define MAJOR(dev)  ((dev)>>8)
#define MINOR(dev)  ((dev) & 0xff)
#endif
#ifndef SCSI_BLK_MAJOR
#ifdef SCSI_DISK0_MAJOR
#ifdef SCSI_DISK8_MAJOR
#define SCSI_DISK_MAJOR(M) ((M) == SCSI_DISK0_MAJOR || \
  ((M) >= SCSI_DISK1_MAJOR && (M) <= SCSI_DISK7_MAJOR) || \
  ((M) >= SCSI_DISK8_MAJOR && (M) <= SCSI_DISK15_MAJOR))
#else
#define SCSI_DISK_MAJOR(M) ((M) == SCSI_DISK0_MAJOR || \
  ((M) >= SCSI_DISK1_MAJOR && (M) <= SCSI_DISK7_MAJOR))
#endif /* defined(SCSI_DISK8_MAJOR) */
#define SCSI_BLK_MAJOR(M) (SCSI_DISK_MAJOR((M)) || (M) == SCSI_CDROM_MAJOR)
#else
#define SCSI_BLK_MAJOR(M)  ((M) == SCSI_DISK_MAJOR || (M) == SCSI_CDROM_MAJOR)
#endif /* defined(SCSI_DISK0_MAJOR) */
#endif /* defined(SCSI_BLK_MAJOR) */
    if (((MAJOR(s.st_rdev) == HD_MAJOR &&
          MINOR(s.st_rdev)%64 == 0) ||
         (SCSI_BLK_MAJOR(MAJOR(s.st_rdev)) &&
          MINOR(s.st_rdev)%16 == 0))) {
        printf("%s is entire device, not just one partition!\n", device);
        proceed_question();
    }
#endif
}

void check_mount(const char *device, int force, const char *type)
{
    errcode_t retval;
    int mount_flags;

    retval = ext2fs_check_if_mounted(device, &mount_flags);
    if (retval) {
        bb_error_msg("can't determine if %s is mounted", device);
        return;
    }
    if (mount_flags & EXT2_MF_MOUNTED) {
        bb_error_msg("%s is mounted !", device);
force_check:
        if (force)
            bb_error_msg("badblocks forced anyways");
        else
            bb_error_msg_and_die("it's not safe to run badblocks!");
    }

    if (mount_flags & EXT2_MF_BUSY) {
        bb_error_msg("%s is apparently in use by the system", device);
        goto force_check;
    }
}

void parse_journal_opts(char **journal_device, int *journal_flags,
            int *journal_size, const char *opts)
{
    char *buf, *token, *next, *p, *arg;
    int journal_usage = 0;
    buf = xstrdup(opts);
    for (token = buf; token && *token; token = next) {
        p = strchr(token, ',');
        next = 0;
        if (p) {
            *p = 0;
            next = p+1;
        }
        arg = strchr(token, '=');
        if (arg) {
            *arg = 0;
            arg++;
        }
        if (strcmp(token, "device") == 0) {
            *journal_device = blkid_get_devname(NULL, arg, NULL);
            if (!journal_device) {
                journal_usage++;
                continue;
            }
        } else if (strcmp(token, "size") == 0) {
            if (!arg) {
                journal_usage++;
                continue;
            }
            (*journal_size) = strtoul(arg, &p, 0);
            if (*p)
                journal_usage++;
        } else if (strcmp(token, "v1_superblock") == 0) {
            (*journal_flags) |= EXT2_MKJOURNAL_V1_SUPER;
            continue;
        } else
            journal_usage++;
    }
    if (journal_usage)
        bb_error_msg_and_die(
            "\nBad journal options specified.\n\n"
            "Journal options are separated by commas, "
            "and may take an argument which\n"
            "\tis set off by an equals ('=') sign.\n\n"
            "Valid journal options are:\n"
            "\tsize=<journal size in megabytes>\n"
            "\tdevice=<journal device>\n\n"
            "The journal size must be between "
            "1024 and 102400 filesystem blocks.\n\n");
}

/*
 * Determine the number of journal blocks to use, either via
 * user-specified # of megabytes, or via some intelligently selected
 * defaults.
 *
 * Find a reasonable journal file size (in blocks) given the number of blocks
 * in the filesystem.  For very small filesystems, it is not reasonable to
 * have a journal that fills more than half of the filesystem.
 */
int figure_journal_size(int size, ext2_filsys fs)
{
    blk_t j_blocks;

    if (fs->super->s_blocks_count < 2048) {
        bb_error_msg("Filesystem too small for a journal");
        return 0;
    }

    if (size >= 0) {
        j_blocks = size * 1024 / (fs->blocksize / 1024);
        if (j_blocks < 1024 || j_blocks > 102400)
            bb_error_msg_and_die("\nThe requested journal "
                "size is %d blocks;\n it must be "
                "between 1024 and 102400 blocks; Aborting",
                j_blocks);
        if (j_blocks > fs->super->s_free_blocks_count)
            bb_error_msg_and_die("Journal size too big for filesystem");
        return j_blocks;
    }

    if (fs->super->s_blocks_count < 32768)
        j_blocks = 1024;
    else if (fs->super->s_blocks_count < 256*1024)
        j_blocks = 4096;
    else if (fs->super->s_blocks_count < 512*1024)
        j_blocks = 8192;
    else if (fs->super->s_blocks_count < 1024*1024)
        j_blocks = 16384;
    else
        j_blocks = 32768;

    return j_blocks;
}

void print_check_message(ext2_filsys fs)
{
    printf("This filesystem will be automatically "
         "checked every %d mounts or\n"
         "%g days, whichever comes first.  "
         "Use tune2fs -c or -i to override.\n",
           fs->super->s_max_mnt_count,
           (double)fs->super->s_checkinterval / (3600 * 24));
}

void make_journal_device(char *journal_device, ext2_filsys fs, int quiet, int force)
{
    errcode_t   retval;
    ext2_filsys jfs;
    io_manager  io_ptr;

    check_plausibility(journal_device, force);
    check_mount(journal_device, force, "journal");
    io_ptr = unix_io_manager;
    retval = ext2fs_open(journal_device, EXT2_FLAG_RW|
                    EXT2_FLAG_JOURNAL_DEV_OK, 0,
                    fs->blocksize, io_ptr, &jfs);
    if (retval)
        bb_error_msg_and_die("can't journal device %s", journal_device);
    if (!quiet)
        printf("Adding journal to device %s: ", journal_device);
    fflush(stdout);
    retval = ext2fs_add_journal_device(fs, jfs);
    if (retval)
        bb_error_msg_and_die("\nFailed to add journal to device %s", journal_device);
    if (!quiet)
        puts("done");
    ext2fs_close(jfs);
}

void make_journal_blocks(ext2_filsys fs, int journal_size, int journal_flags, int quiet)
{
    unsigned long journal_blocks;
    errcode_t   retval;

    journal_blocks = figure_journal_size(journal_size, fs);
    if (!journal_blocks) {
        fs->super->s_feature_compat &=
            ~EXT3_FEATURE_COMPAT_HAS_JOURNAL;
        return;
    }
    if (!quiet)
        printf("Creating journal (%ld blocks): ", journal_blocks);
    fflush(stdout);
    retval = ext2fs_add_journal_inode(fs, journal_blocks,
                          journal_flags);
    if (retval)
        bb_error_msg_and_die("can't create journal");
    if (!quiet)
        puts("done");
}

char *e2fs_set_sbin_path(void)
{
    char *oldpath = getenv("PATH");
    /* Update our PATH to include /sbin  */
#define PATH_SET "/sbin"
    if (oldpath)
        oldpath = xasprintf("%s:%s", PATH_SET, oldpath);
     else
        oldpath = PATH_SET;
    putenv(oldpath);
    return oldpath;
}