source: MondoRescue/branches/3.1/mindi/deplist.d/minimal.conf@ 2937

Last change on this file since 2937 was 2937, checked in by Bruno Cornec, 12 years ago

svn merge -r 2849:2935 ../3.0

  • Adds 3 binaries called potentially by udev o support USB key mount at restore time (Victor Gattegno)
  • mindi only sets the boot flag of a USB device if none is present already (should avoid flip/flop situation)
  • Fix a compatibility bug in analyze-my-lvm whete exclude lists with '|' was incorrectly analyzed (' ' still expected)
  • Precise that -J is not supported by mondorestore yet.
  • Fix a compatibility bug in mindi where exclude lists with '|' was incorrectly analyzed (' ' still expected)
  • Install an MBR on USB devices when possible
  • Improve error message in case mondorestore isn't found
  • Adds support for more virtio devices for KVM restore
  • Improve mbr.bin handling
  • Fix an issue in test of FindKernel for Xen and non Xen cases
    • Fix #492 by removing an extra useless fi
    • Move fvat nd fat modules to CDROM_MODS in order to have them in the initrd to support saving logs to a USB device e.g.
    • Fix an error when dmidecode reports comments before system name
    • Fix previous broken patch on comment management for bkphw
    • Improve msgs printed during kbd analysis
    • Fix a small remaining pb with new comment support
    • Try to again improve the mount/umount stuff in mondo -Adds mention to OEL, CentOS, ScientifLinux as RHEL clones
  • Fix a panadoid_free done on the wrong variable (solve a memory leak)
  • Solve #495 by skipping the potential (auto-read-only) when analyzin /proc/mdstat result
  • Fix some markup in man pages
  • adds the post-nuke script sample for Debian (Guillaume Pernot/Andrée Leidenfrost)
  • Avoid a useless umount when changing of afio set, let insist_on_cd check and perform if needed
  • Copy everything under .ssh of root account to allow for sshfs mount without passwd at restore time.
  • Adds support for bnx2i driver
  • Try to fix #496 by supporting the protocol in the output of the mount command (sshfs#...)
  • Uses the -d option of the mount command to avoid leaving loop devices in use. Probably provoked by the usage of a more recent busybox, but anyway that option doesn't hurt, and does nothing for non-loop devices. Should fix the problems reported on the ML with NFS and more than 8 ISO images (8 being the default number of loop devices available)
  • Attempt to fix #436 by adding some newtDrawForm where appropriate.
  • Fix bugs in the kernel detection routine of mindi (some echo were done without capturing their output, confusing the return). This should also help the Xen detection issue
  • Change the logging function to be nearer from 2.2.10, and start using some
  • Initialize some global fields with an empty string, now that newt Draws more regularly progress forms
  • Mindi progression still not good, but showing now 3% when calling mindi. Would need a specific handling for the progress bar to evolve more afterwards
  • Add compatibility with the latest SSSTK + PSP content for HP ProLiant + branding homogeneous now. We only take conrep out of the SSSTK pending a package availability. Using hpacuscripting now. Review of parameters called following test made.
  • Fix #501 by pushing BOOT_SIZE to 36864 for certain Ubuntu cases
  • Fix some remaining inconsistencis in the ProLiant HW backup. ready for usage.
  • Fix an issue on udevadm call (needs an intermediate variable)
  • Fix a remaining ProLiant tool call
  • Remove again some wrong variable initialization for Net in order to not have strange messages now we call Draw more often
  • Adds support for hwaddr (MAC addresses) at restore time, and map to the correct NIC if it's found at restore time (based on code from Stefan Heijmans)
  • Try to Fix #499 by changing init in order to never exit, and rebooting using sysrq in /proc (not portable). Maybe should move to using a real init, and a separated rcS script.
  • Fixes the shell msg error by using setsid as per Busybox FAQ
  • Fix #491 by correctly checking Xen kernel used for a dom0 env (apollo13)
  • Improves logging in Die()
  • Improve again ProLiant HW support, by adding references to the yet to come SSSTK rpm so that conrep is called at its future right place.
  • Improve mindi support for kernel 3.x
  • Fix #499 for good, by using a real init from busybox and moving our init script to etc/init.d/rcS. We also now call the reboot from busybox to exit, which indeed reset the system correctly (in a VM at least which wasn't the case before). Reauires a new mindi-busybox as well.
  • Attempt to solve #503 by handling /lib64 separately for udev and only if not a link (to /lib) for Ubuntu 64
  • Improve again previous tests for bug #503
  • Improve -d option description for NFS
  • Allow http download for ftp content
  • New italian mirror
  • Fix #505 by documenting environment variables
    • Fix a bug where on OBDR mode compression was turned off to create the OBDR content but not back on (report from the mailing list)
  • solve http://trac.mondorescue.org/ticket/520 by Victor Gattegno
  • Fix #524 as option -U needs a size also
  • Removes useless gendf option
  • Fix #511 now stabgrub is called also after conf file modifications
  • Adds support for SUID binaries
  • remove a useless xenkernelname variable from mindi
  • Should fix #512 by clearing old scratchdir before changing to a new
  • Simplify the function engaging SCSI for Smart Array controllers, and support as many controller as we have
  • Add some binaries used on SLES 10 by udev
  • Fix a syntax issue in newt-specific.c
  • Fix a memory free bug where a used variable was freed to early
  • Fix a memory free bug where a used variable was misused in asprintf/free
  • Fix #498 by using an external program (hpsa_obdr_mode) which can set the mode of the tape to CD-ROM or Sequential at will.

That program will have to be downloaded from http://cciss.sf.net

  • Adds support for the route command in mindi-busybox
  • Force block size back to 32768 in OBDR mode after skipping the 2 tape marks, to read the additional rootfs data corerctly - Fix #498 for good it seems
  • Adds support for a new pata_atiixp driver
  • Fix #525 and improve printing when no /etc/raidtab, but still md devices
  • Exclude /run similarly to /sys and /proc
  • Fix a bug in mindi when having multiple swap partiions with same starting string (/dev/dm-1 and /dev/dm-16). We now add a space in the grep to avoid mischoice.
  • Fix grub installation if we had to go in the hack part which wasn't using the correct variables to make decisions !
  • Remove all mention of mondorescue.com from code
  • Fix some website typo on the download page and precise that we now develop on Mageia
  • Exclude sysfs devpts and tmpfs partitions found in RHEL 6.2 from analyze by mindi (made error messages)
  • Force activation of first partition which should not be optional as everything is destroyed before
  • Fix a bug in analyze-my-lvm where LVs were created in random order (the one of lvscan) instead of using the dm-xxx order, which creates issues at restore time between the mapping created then and the one we had at backup time which could be inconssistent

-mondoarchive now exists if the mt command is missing when needed

  • Proper fix for analyze-my-lvm
  • Fix #500 and #473 by adding support of old metadata format for mdadm if using grub < 0.9x or lilo on a md boot device (to be tested)
  • Really never inject or eject when the -e option is passed or device is inappropriate (USB, Net, ...)
  • Fix #577 by having factor back as a float (not a long ! it's a decimal value) and making the appropriate cast.
  • Fix #578 by improving the regexp used for CD/DVD detection with -scanbus option
  • Adds more verbosity when LVM creation fails.
  • Fix #579 by checking with pipes on both sides of the string
  • debugfs should be excluded from the device considered for fstab analysis
File size: 2.2 KB
Line 
1# $Id$
2#
3# System Tools that are mandatory inside the initrd
4#
5
6/lib/ld-linux.so.2
7
8# Base Unix commands
9# Used by init
10/bin/sh
11/bin/awk
12/usr/bin/awk
13/bin/gawk
14# On Debian
15/usr/bin/awk
16/usr/bin/gawk
17/bin/dd
18/bin/grep
19/bin/uname
20/bin/df
21/usr/bin/loadkeys
22# On ArchLinux
23/bin/loadkeys
24/bin/pidof
25/sbin/pidof
26#On Archlinux
27/usr/bin/reboot
28/sbin/reboot
29/sbin/openvt
30/usr/bin/openvt
31/usr/bin/tail
32/usr/bin/which
33/usr/bin/strings
34/usr/bin/test
35/usr/bin/[
36/usr/bin/tr
37/usr/bin/cut
38/usr/bin/basename
39/bin/basename
40/usr/bin/find
41/bin/stty
42/bin/echo
43/bin/chown
44/bin/mknod
45/bin/kill
46/bin/date
47/bin/cat
48/bin/ls
49/bin/ps
50/bin/umount
51/bin/dmesg
52/bin/ln
53/bin/pwd
54/bin/grep
55/bin/vi
56/bin/mv
57/bin/chmod
58/bin/more
59/bin/[
60/bin/true
61/bin/sed
62/bin/touch
63/bin/rmdir
64/bin/cp
65/bin/tar
66/bin/rm
67/bin/mkdir
68/bin/sleep
69/bin/uname
70/etc/services
71/etc/protocols
72/etc/shells
73/etc/termcap
74/etc/bashrc
75# For id resolution
76/etc/nsswitch.conf
77/lib/libnss_files.so.2
78/sbin/shutdown
79
80# Compression
81/bin/gzip
82
83# Logs
84/sbin/klogd
85/sbin/syslogd
86# On ArchLinux
87/usr/sbin/syslog-ng
88
89# HW related
90/sbin/fdisk
91/sbin/hdparm
92
93# FS related
94/bin/mount
95/sbin/losetup
96/sbin/mount.ntfs
97/sbin/mount.ntfs-3g
98/sbin/fstab-decode
99
100# For udev/devfs
101/sbin/MAKEDEV
102/etc/init.d/functions
103# On ArchLinux
104/etc/rc.d/functions
105/etc/services
106/sbin/devfsd
107/etc/udev
108/etc/hotplug.d
109/sbin/udev.static
110/sbin/udevsend
111/sbin/udevd
112/sbin/hwup
113/sbin/path_id
114/sbin/scsi_tur
115# On ArchLinux
116/sbin/udevadm
117/sbin/udevstart.static
118/sbin/udev_volume_id
119/sbin/start_udev
120/sbin/udev
121/sbin/udevstart
122/sbin/create_static_dev_nodes
123/etc/sysconfig/udev
124/sbin/consoletype
125# On SLES 10
126/sbin/path_id
127/sbin/scsi_id
128/sbin/scsi_tur
129/sbin/hwup
130
131# Modules
132/sbin/insmod
133/sbin/lsmod
134# On ArchLinux
135/bin/lsmod
136/sbin/modprobe
137/etc/modprobe.d
138/etc/modprobe.conf
139/etc/conf.modules
140/etc/modules.conf.local
141
142# For mdadm
143/sbin/mdadm
144/sbin/mdassemble
145/etc/mdadm.conf
146/etc/mdadm/mdadm.conf
147
148# Raid support
149/sbin/raidstart
150/etc/raidtab
151
152# Tools for multipath support
153/sbin/multipath
154/sbin/dmsetup
155/sbin/kpartx
156/sbin/dmraid
157/sbin/scsi_id
158/sbin/mpath_prio_alua
159/sbin/mpath_wait
160/sbin/mpath_ctl
161/sbin/mpath_prio_emc
162/sbin/mpath_prio_hds_modular
163/sbin/mpath_prio_netapp
164/sbin/mpath_prio_ontap
165/sbin/mpath_prio_rdac
166/sbin/mpath_prio_tpc
167
168# Not completely mandatory
169/usr/bin/tty
Note: See TracBrowser for help on using the repository browser.