source: branches/3.0/mindi/mindi~ @ 3182

Last change on this file since 3182 was 3182, checked in by bruno, 6 years ago

Fix kernel version 3 support in a mindi test

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.1 KB
Line 
1#!/bin/bash
2
3# $Id: mindi~ 3182 2013-09-09 23:05:09Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `ReadAllLink $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
379    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
381    if [ ! -e "$KEYDIR" ] ; then
382        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
383        return 0
384    fi
385    if [ -e "/etc/sysconfig/keyboard" ] ; then
386        LogFile "INFO: Red Hat-style config detected."
387        keyfile=/etc/sysconfig/keyboard
388    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
389        LogFile "INFO: Slackware-style config detected."
390        keyfile=/etc/rc.d/rc.keymap
391    elif [ -e "/etc/rc.config" ] ; then
392        LogFile "INFO: Debian-style config detected."
393        keyfile=/etc/rc.config
394    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
395        LogFile "INFO: Debian-style config detected."
396        mkdir -p $bigdir/tmp
397        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
398        KBDEPTH=0
399        mkdir -p $bigdir/etc/console
400        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
401        echo ""
402        echo -e "$DONE"
403        return 0
404    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
405        LogFile "INFO: Ubuntu-style config detected."
406        mkdir -p $bigdir/tmp
407        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
408            kbdfile="/etc/console-setup/boottime.kmap.gz"
409        else
410            kbdfile="/etc/console-setup/cached.kmap.gz"
411        fi
412        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
413        KBDEPTH=0
414        mkdir -p $bigdir/etc/console-setup
415        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
416        echo ""
417        echo -e "$DONE"
418        return 0
419    elif [ -e "/etc/rc.conf" ] ; then
420        LogFile "INFO: ArchLinux config detected."
421        keyfile=/etc/rc.conf
422    elif [ -e "/etc/conf.d/keymaps" ] ; then
423        LogFile "INFO: Gentoo-style config detected."
424        keyfile=/etc/conf.d/keymaps
425    else
426        LogFile "Searching for rc.config ..."
427        keyfile=`find /etc -name rc.config | head -n1`
428        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
429            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
430            return
431        else
432            LogFile "INFO: Found $keyfile"
433        fi
434    fi
435    if [ ! -e "$KEYDIR/keymaps" ] ; then
436        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
437        return
438    fi
439    LogFile "INFO: keyfile=$keyfile"
440    # For SLES we need to remove the .map.gz extension Cf #614
441    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
442    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
443    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
444    LogFile "INFO: locale=$locale"
445    #
446    # Process the keymaps dir once for all
447    # AddKeyboardMappingFile will use it recursively
448    #
449    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
450    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
451    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
452    # If we have multiple keymaps then log it !!
453    echo "$mp" | grep -q " " >> $LOGFILE
454    if [ $? -eq 0 ]; then
455        LogAll "WARNING: Multiple keymaps found: $mp"
456        LogFile "INFO: The following one will be used"
457    fi
458    for i in $mp ; do
459        mappath=$i
460        [ -e "$i" ] && [ ! -d "$i" ] && break
461    done
462    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
463        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
464    fi
465    LogFile "INFO: mappath = $mappath"
466    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
467        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
468        return
469    fi
470    LogAll "INFO: Adding the following keyboard mapping tables: "
471    mkdir -p $bigdir/tmp
472    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
473    KBDEPTH=0
474    AddKeyboardMappingFile $mappath
475    echo ""
476    echo -e "$DONE"
477    rm -f $MINDI_TMP/keymaps.find
478    return 0
479}
480
481
482FindMboot32Binary() {
483    MBOOTC32=/usr/lib/syslinux/mboot.c32
484    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
485    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
486    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
487    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
488    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
489    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
490    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
491    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
492}
493
494FindIsolinuxBinary() {
495    ISOLINUX=/usr/lib/isolinux.bin
496    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
497    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
498    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
499    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
500    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
501    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
502    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
503    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
504}
505
506
507FindSpecificModuleInPath() {
508    local modpaths pwd line
509    pwd=`pwd`
510    if [ "$YOUR_KERNEL_SUCKS" ] ; then
511        cd "$MINDI_TMP"
512    else
513        cd /
514    fi
515    if [ ! -e "$1" ] ; then
516        LogAll "WARNING: cannot search specific path '$1'"
517        return 1
518    fi
519    # Find all files and links (required for some VMWare VMs)
520    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
521    echo "$modpaths"
522    cd "$pwd"
523}
524
525
526GenerateGiantDependencyList() {
527    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
528
529    echo -en "Analyzing dependency requirements"
530    outfile=$1
531    tempfile=$MINDI_TMP/$$.txt
532    incoming=`ReadLine`
533
534    > $tempfile
535    progress=0
536    res=0
537    noof_lines=$2
538    while [ "$incoming" != "" ] ; do
539        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
540            incoming=`ReadLine`
541            continue
542        fi
543        if [ "$incoming" = "LVMFILES:" ] ; then
544            break
545        fi
546        filelist=`GenerateListForFile "$incoming"`
547        r=$?
548        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
549        res=$(($res+$r))
550#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
551        for fname in $filelist ; do
552            [ "$fname" != "" ] && echo "$fname" >> $tempfile
553        done
554        progress=$(($progress+1))
555        LogProgress $progress $noof_lines
556        incoming=`ReadLine`
557    done
558    if  [ "$incoming" = "LVMFILES:" ] ; then
559        incoming=`ReadLine`
560        lvmversion=""
561        while [ "$incoming" != "" ] ; do
562            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
563                incoming=`ReadLine`
564                continue
565            fi
566            filelist=`GenerateListForFile "$incoming"`
567            for tool in $filelist ; do
568                lvmresolved=`readlink -f $tool`
569                if [ "$tool" = "$lvmresolved" ]; then
570                    echo "$tool" >> $tempfile
571                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
572                    if [ "$lvmversion" = "" ] ; then
573                        lvmversion=`$lvmresolved`
574                        echo "$lvmresolved" >> $tempfile
575                    fi
576                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
577                    if [ "$lvmversion" = "200" ]; then
578                        # pvdata and lvmcreate_initrd don't exist in LVM2
579                        case "$toolstripped" in
580                        "pvdata")
581                            continue
582                            ;;
583                        "lvmcreate_initrd")
584                            continue
585                            ;;
586                        esac
587                    fi
588                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
589                    if [ -e "$toolpath" ] ; then
590                        echo "$toolpath" >> $tempfile
591                        echo "$tool" >> $tempfile
592                    else
593                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
594                    fi
595                    if [ -e "$toolpath" ] ; then
596                        echo "$toolpath" >> $tempfile
597                        echo "$tool" >> $tempfile
598                    else
599                        echo "Where are your LVM-Tools? Couldn't find $tool"
600                    fi
601                else
602                    echo "$tool" >> $tempfile
603                fi
604            done
605            progress=$(($progress+1))
606            LogProgress $progress $noof_lines
607            incoming=`ReadLine`
608        done
609    fi
610    echo -en "$DONE\nMaking complete dependency list"
611
612    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
613    mv -f $tempfile.new $tempfile
614    > $outfile.pre
615    progress=0
616    noof_lines=`cat $tempfile | wc -l`
617    LogFile "---------------------------------"
618    LogFile "List of dependencies:             "
619    LogFile "---------------------------------"
620    for fname in `cat $tempfile` ; do
621        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
622        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
623        progress=$(($progress+1))
624        LogProgress $progress $noof_lines
625    done
626    if [ _"$MONDO_SHARE" != _"" ]; then
627        mkdir -p $bigdir/tmp
628        mkdir -p $bigdir/usr/bin
629        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
630            LogAll "\nINFO: Incorporating post-nuke tarball"
631            old_pwd=`pwd`
632            cd "$bigdir"
633            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
634            cd "$old_pwd"
635        fi
636        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
637            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
638        else
639            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
640            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
641            LogIt "       If Mindi was called by Mondo then send me a bug report."
642            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
643            LogIt "       Finally, run Mindi again."
644            Die "Odd."
645        fi
646        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
647        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
648            LogAll "\nINFO: Incorporating Network-related settings"
649            for r in NETFS-* ISO-PREFIX ; do
650                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
651                LogFile "INFO: Copying $r to ramdisk"
652            done
653        fi
654    fi
655    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
656    rm -f $tempfile $outfile.pre
657    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
658    return $res
659}
660
661
662GenerateListForFile() {
663    local files_found loc fname incoming i res
664    incoming="$1"
665    files_found=""
666    res=0
667
668    for fname in $incoming ; do
669        files_found="$files_found `LocateFile $fname`"
670    done
671
672    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
673}
674
675
676# Returns all disk devices which are part of a raid array
677GetAllRaidMembers() {
678    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
679}
680
681
682GetFileSizeList() {
683    local i
684    for i in `find $1 -type d -o -print` ; do
685        du -sk $i
686    done
687}
688
689
690# Check kernel filesystem capabilites for accessing initrd image
691# Could be ext2 FS (old mode) or initramfs (new mode)
692#
693# Interface definition:
694# param #1: absolute path to kernel image
695GetInitrdFilesystemToUse() {
696
697    # interface test: make sure we have one parameter
698    if [ $# -ne 1 ]; then
699        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
700    fi
701
702    # interface parameters
703    local lvKernelImage=$1
704
705    # local constants (filesystem magic strings)
706    local lcMagicCramfs="<3>cramfs: wrong magic"
707    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
708    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
709    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
710
711    # local variables
712    local lvOffset
713    local lvScanRes
714    local lvUseFilesystem
715
716    # say where we are.
717    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
718
719    # verify that file exists
720    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
721
722    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
723    file $lvKernelImage 2>&1 | grep -q gzip
724    if [ $? -eq 0 ]; then
725        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
726        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
727    else
728        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
729        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
730        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
731        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
732        if [ $lvOffset -eq 0 ]; then
733            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
734            lvScanRes=$lcMagicInitfs
735        else
736            lvOffset=`expr $lvOffset / 2`
737            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
738            # scan again  kernel image
739            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
740        fi
741    fi
742
743    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
744    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
745        lvUseFilesystem="ext2fs"
746    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
747        lvUseFilesystem="ext3fs"
748    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
749        lvUseFilesystem="initramfs"
750    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
751        lvUseFilesystem="cramfs"
752    else
753        # In that case, we are most probably after 2.6.30 and use the supported initramfs
754        LogFile "No automatic detection found previously. Supposing initramfs."
755        LogFile "Report on the MondoRescue mailing-list withyour log files"
756        lvUseFilesystem="initramfs"
757    fi
758
759    # say what we are using
760    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
761
762    # return file system to use
763    echo "$lvUseFilesystem"
764
765}
766
767# Searches members of raid device
768# $1: raid device (/dev/md...)
769GetRaidDevMembers() {
770    if [ ! -f /etc/raidtab ]; then 
771        return
772    fi
773    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
774}
775
776
777HackPathsToFailsafe() {
778    local incoming newpath stub i pwd
779    incoming=`ReadLine`
780    pwd=`pwd`
781    cd "$MINDI_TMP"
782    while [ "$incoming" != "" ] ; do
783        stub=`basename $incoming`
784        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
785        for i in $newpath ; do
786            echo "$i"
787        done
788        read incoming
789    done
790    cd "$pwd"
791}
792
793
794ListAllPartitions() {
795    local res currline partition all_partitions ap_orig remaining i j
796
797    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
798    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
799    if [ -e "/vmfs/volumes" ]; then
800        # For VMWare ESX 3 get the device names of these volumes
801        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
802    fi
803    return
804}
805
806
807ListImagesForUser() {
808    local path fname
809    path=$MINDI_CACHE
810    echo -en "In the directory '$path' you will find the images:-\n"
811    for fname in `ls $path | grep -F mindi-` ; do
812        printf "%19s " $fname
813    done
814    echo " "
815}
816
817
818ListKernelModulePaths() {
819    local module_list module fname r kern
820    module_list="$MODULES"
821    # Remove unwanted modules from list
822    for i in $DENY_MODS; do
823        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
824        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
825    done
826###
827### Sq-Modification ... Use kernelname for module search path if specified
828###
829    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
830    then
831        kern=${kernelname}
832    else
833        kern="$KERVERRUN"
834    fi
835    export KERVER=$kern
836###
837### Sq-Mod End
838###
839    # Get rid of duplicates, so that if a live kernel module also appears
840    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
841    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
842        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
843        if [ -z "$r" ]; then
844            if [ "`echo "$MODULES" | grep -w $module`" ]; then
845                r="[live module file not found]"
846            else
847                r="[extra module file not found]"
848            fi
849        else
850            [ -f "$r" ] && echo "$r"
851        fi
852        LogFile "INFO: module $module --> $r"
853    done
854    find /lib/modules/$kern/modules.* -type f 2> /dev/null
855}
856
857#
858# Critical function which computes all dependencies (dyn. lib.)
859# for a list of binaries
860#
861LocateDeps() {
862    local incoming fname deps
863    incoming="$*"
864    for fname in $incoming ; do
865        if [ ! -e "$fname" ] ; then
866            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
867            if echo $fname | grep lvm &> /dev/null ; then
868                LogFile "          This warning only affects you if you are using LVM."
869                if echo "$MODULES" | grep lvm &> /dev/null ; then
870                    LogFile "          I think you are, so please take heed!"
871                else
872                    LogFile "          I don't think you are, so don't worry about it."
873                fi
874            fi
875        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
876            newf=`readlink -f $fname`
877            LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
878            ldd $newf 2> /dev/null | ProcessLDD
879        else
880            ldd $fname 2> /dev/null | ProcessLDD
881        fi
882    done
883}
884
885
886# Give all symlinks recursively of a full path name
887ReadAllLink() {
888    file="$1"
889
890    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
891        # We need to normalise the path with .. in it
892        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
893    done
894    echo "$file"
895    if [ ! -h $file ]; then
896        return 0
897    fi
898
899    link=`readlink $file`
900    d=`dirname $file`
901    # Is link a relative or full path name
902    fchar=`echo $link | cut -c1`
903    # If mother dir is a link print it
904    if [ -h "$d" ]; then
905        echo "$d"
906        d2=`readlink $d`
907        c2=`echo $d2 | cut -c1`
908        if [ "$c2" != "/" ]; then
909            if [ "$c2" != "." ]; then
910                d="/$d2"
911            else
912                d="$d/$d2"
913            fi
914        fi
915    fi
916    if [ "$fchar" != "/" ]; then
917        # Relative or local link
918        ReadAllLink "$d/$link" 
919    else
920        # Absolute path
921        ReadAllLink $link 
922    fi
923}
924
925
926LocateFile() {
927    local i path fname_to_find location output resolved tmp stub cache_id loclist
928    fname_to_find="$1"
929    # It's an absolute path
930    if echo "$fname_to_find" | grep -x "/.*" ; then
931        output="$fname_to_find"
932        if [ -h "$output" ] ; then
933            output="`ReadAllLink $output` $output"
934        fi
935        echo "$output"
936        return 0
937    fi
938    # It's not an absolute path
939    output=""
940    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
941    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
942        [ -h "$path" ] && continue
943        [ ! -e "$path/$fname_to_find" ] && continue
944        output="$path/$fname_to_find $output"
945        if [ -h "$path/$fname_to_find" ] ; then
946            output="`ReadAllLink $path/$fname_to_find` $output"
947        fi
948    done
949    if [ "$output" = "" ] ; then
950        return 1
951    fi
952    echo "$output"
953    return 0
954}
955
956LogProgress() {
957    local i progress modres noof_lines
958 
959    progress=$1
960    noof_lines=$2
961
962    echo -en "\r\t\t\t\t\t\t\t\t"
963    i=$(($progress*100))
964    if [ $noof_lines -ne 0 ]; then
965        i=$(($i/$noof_lines))
966    else
967        i=0
968    fi
969    echo -en "$i"
970    echo -en "%"
971    modres=$(($progress%4))
972    [ "$modres" -eq "0" ] && echo -en "\t/"
973    [ "$modres" -eq "1" ] && echo -en "\t-"
974    [ "$modres" -eq "2" ] && echo -en "\t\\"
975    [ "$modres" -eq "3" ] && echo -en "\t|"
976}
977
978# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
979MakeMondoConfigFile() {
980    local outfile use_lzo use_comp use_star
981    outfile=$1
982    > $outfile
983    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
984    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
985    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
986    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
987    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
988    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
989    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
990    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
991    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
992    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
993    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
994    echo "use-lzo $use_lzo" >> $outfile
995    echo "use-gzip $use_gzip" >> $outfile
996    echo "use-star $use_star" >> $outfile
997    echo "use-lzma $use_lzma" >> $outfile
998    echo "use-comp $use_comp" >> $outfile
999    echo "datestamp `date`" >> $outfile
1000    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1026}
1027
1028# Get PV's for an LV
1029GetPVsForLV() {
1030  if [ -n "$1" ]; then
1031    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1032    if [ -z "$vg" ]; then
1033      return
1034    fi
1035    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1036  fi
1037}
1038
1039
1040MakeMountlist() {
1041    local mountlist all_partitions current_partition \
1042partition_size partition_format outstring partition_number \
1043partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1044absolute_partition old_partition_fmt current_lvolume uname skip
1045
1046    LogFile "------------------------------------"
1047    LogFile "Your raw fstab file looks like this:"
1048    LogFile "------------------------------------"
1049    cat $MY_FSTAB >> $LOGFILE
1050    LogAll "-----------------------------------"
1051    LogAll "Your mountlist will look like this:"
1052    LogAll "-----------------------------------"
1053
1054# mountlist(OUT)
1055    mountlist=$1
1056
1057# NB: partition = device
1058# NB: mountpt = where the device is mounted
1059
1060    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1061
1062    [ "$mountlist" != "" ] && rm -Rf $mountlist
1063    > $mountlist
1064    all_partitions=""
1065   
1066    if [ $LVM != "false" ]; then
1067        LogAll "INFO: Analyzing LVM..."
1068        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1069        if [ $? -ne 0 ]; then
1070            LVM="false"
1071        fi
1072        # Excluded LVs and GVs are not reported here
1073        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1074    fi
1075    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1076    for i in $IMAGE_DEVS ; do
1077        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1078    done
1079    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1080    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1081    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1082    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1083    for c_p in $all_partitions ; do
1084        # Skip fd/cd devices, network FS, cifs
1085        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1086        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1087        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1088            current_partition=`readlink -f $c_p`
1089            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1090                current_partition="$c_p"
1091            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1092                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1093                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1094            fi
1095            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1096        else
1097            current_partition="$c_p"
1098        fi
1099        [ "$c_p" = "none" ] && continue
1100        redhat_label=""
1101        label=""
1102        uuid=""
1103        absolute_partition=`readlink -f $c_p`
1104        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1105
1106        # set default in case we dont't find it
1107        str_to_find_fmt_with=$current_partition
1108
1109        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1110        # current_partition contains only first column of /etc/fstab
1111        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1112            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1113            actual_dev=""
1114
1115            # 1st try, findfs - the RHEL way of finding labels and their partitions
1116            if [ -x "/sbin/findfs" ]; then
1117                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1118            fi
1119   
1120            # 2nd try : blkid, the good way for all LABEL except swap
1121            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1122                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1123                # For LVM FS it will give a /dev/dm-# which should then be converted
1124                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1125                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1126                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1127                    for dev in `ls /dev/mapper/*`; do
1128                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1129                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1130                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1131                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1132                            break
1133                        fi
1134                    done
1135                fi
1136            fi
1137   
1138            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1139            # For LVM gives a /dev/mapper entry
1140            if [ "x$actual_dev" = "x" ]; then
1141                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1142            fi
1143   
1144            # 4th try, with vol_id
1145            # SWAP only
1146            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1147                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1148                for dev_swap in $list_swaps ; do
1149                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1150                    if [ "x$dev_exists" != "x" ]; then
1151                        actual_dev=$dev_swap
1152                        break;
1153                    fi
1154                done
1155            fi
1156
1157            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1158            # LABEL=SW-cciss/c0d0p3 (RDP)
1159            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1160            # SWAP only
1161            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1162                    skip=""
1163                    uname=$KERVERRUN
1164                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1165                    # 2.6.12 needs 16 (FC3)
1166                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1167                    # 2.6.19 and upper needs 1052
1168                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1169                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1170                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1171                    if [ $skip = "" ]; then
1172                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1173                    fi
1174                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1175                    do
1176                        # Location of the swap label for kernel 2.6
1177                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1178                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1179                            actual_dev=$try_dev
1180                        fi
1181                    done
1182            fi
1183
1184            # Check if one of all those tries has known success
1185            if [ "x$actual_dev" != "x" ]; then
1186                current_partition=$actual_dev
1187            else
1188                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1189            fi
1190        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1191        # current_partition contains only first column of /etc/fstab
1192        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1193            uuid=`echo "$current_partition" | cut -d'=' -f2`
1194            actual_dev=""
1195
1196            # 1st try, findfs - the RHEL way of finding labels and their partitions
1197            if [ -x "/sbin/findfs" ]; then
1198                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1199            fi
1200   
1201            # 2nd try : blkid, the good way for all UUID except swap
1202            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1203                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1204                # For LVM FS it will give a /dev/dm-# which should then be converted
1205                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1206                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1207                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1208                    for dev in `ls /dev/mapper/*`; do
1209                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1210                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1211                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1212                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1213                            break
1214                        fi
1215                    done
1216                fi
1217            fi
1218   
1219            # 3th try, with vol_id
1220            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1221                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1222                for dev in $list_dev ; do
1223                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1224                    if [ "x$dev_exists" != "x" ]; then
1225                        actual_dev=$dev
1226                        break;
1227                    fi
1228                done
1229            fi
1230
1231            # 4th try, with dumpuuid (VMWare only ?) for swap
1232            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1233                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1234                for dev in $list_dev ; do
1235                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1236                    if [ "x$dev_exists" != "x" ]; then
1237                        actual_dev=$dev
1238                        break;
1239                    fi
1240                done
1241            fi
1242
1243            # Check if one of all those tries has known success
1244            if [ "x$actual_dev" != "x" ]; then
1245                current_partition=$actual_dev
1246            else
1247                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1248            fi
1249        else
1250            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1251            # they use symlinks in fstab unrelated to what is shown in mount !
1252            if [ _"$partition_mountpt" = _"" ]; then
1253                # set default in case we dont't find it
1254                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1255                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1256                            str_to_find_fmt_with=$tmpp
1257                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1258                            break;
1259                        fi
1260                done
1261            fi
1262        fi
1263
1264        # Detects noauto partitions not mounted and exclude them
1265        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1266        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1267                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1268            continue
1269        fi
1270        # Detects bind partitions and exclude them
1271        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1272                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1273            continue
1274        fi
1275
1276        # Look for devices which have to be excluded
1277        skip=0
1278        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1279            l=""
1280            list_of_devices="`ReadAllLink $current_partition`"
1281            for d in $list_of_devices; do
1282                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1283            done
1284
1285            # Remove PVs from LVs excluded
1286            l="$l `GetPVsForLV $current_partition`"
1287
1288            # We want a single unique list
1289            list_of_devices="`echo $l | sort -u`"
1290
1291            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1292                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1293                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1294                    skip=1
1295                    continue
1296                fi
1297            done
1298        fi
1299        if [ $skip -eq 1 ]; then
1300            continue
1301        fi
1302
1303        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1304        # Detects iso9660 ISO images and exclude them
1305        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1306                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1307            continue
1308        fi
1309        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1310        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1311        # the former is then a link to the latter, so we test whether
1312        # $current_partition is actually such a link or not and set
1313        # $current_lvolume accordingly. On Debian you may find more than one answer
1314        # so we remove the one corresponding to /dev/.static
1315        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1316        # principle is the same and we need to find the link to it as well.
1317        # Note that $current_lvolume may well be an
1318        # ordinary device. It is just to make sure that we feed the right value
1319        # into any of the LVM tools if possible.
1320
1321        current_lvolume="$current_partition"
1322        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1323            # .static dir are a Debian specificity
1324            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1325            echo $current_lvolume | grep -q ' '
1326            if [ $? -eq 0 ]; then
1327                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1328            fi
1329            # if it's not found, it may well be a real device such as a multipath one
1330            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1331            if [ _"$current_lvolume" = _"" ]; then
1332                current_lvolume="$current_partition"
1333            fi
1334        fi
1335        #
1336        # End of LVM device style variation code (other than $current_lvolume).
1337
1338        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1339            # Size computed via LVM not directly
1340            partition_size="lvm"
1341        else
1342            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1343            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1344            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1345                # Skip swap files
1346                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1347                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1348                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1349                [ "$partition_format" != "swap" ] && partition_format="swap"
1350                if [ "$partition_size" = "" ] ; then
1351                    totalsize=0
1352                    items=0
1353                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1354                        totalsize=$(($totalsize+$i))
1355                        items=$(($items+1))
1356                    done
1357                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1358                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1359                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1360                fi
1361            else
1362                partition_size=`SizeOfPartition $current_partition`
1363            fi
1364        fi
1365        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1366        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1367        if [ "$partition_mountpt" = "" ] ; then
1368            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1369                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1370                    partition_mountpt="raid"
1371                    partition_format="raid"
1372                else
1373                    partition_mountpt="lvm"
1374                    partition_format="lvm"
1375                fi
1376            fi
1377        fi
1378        psz=$partition_size
1379        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1380        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1381        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1382            partition_mountpt="image"
1383            old_partition_fmt=$partition_format
1384            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1385            partition_size=$(($partition_size+1)); # just in case
1386            if [ "$partition_format" = "Linux" ] ; then
1387                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1388                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1389                partition_format=$old_partition_fmt
1390            fi
1391        fi
1392
1393        if [ ! "$partition_mountpt" ] ; then
1394            LogFile "------- $FDISK -l $qq log ------------"
1395            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1396                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1397                [ "$partition_format" ] && break
1398            done
1399            LogFile "------- $FDISK log end ------------"
1400            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1401                partition_format="compaq"
1402            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1403                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1404                continue
1405            fi
1406        fi
1407        if [ "$redhat_label" ]; then
1408            label="$redhat_label"
1409        elif [ "$uuid" ]; then
1410            label="$uuid"
1411        fi
1412        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1413        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1414        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1415        if [ "$current_partition" = "" ] ; then
1416            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1417        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1418            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1419                partition_mountpt=raid
1420                partition_format=raid
1421                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1422                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1423            else
1424                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1425            fi
1426        elif [ "$partition_format" = "" ] ; then
1427            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1428        elif [ "$partition_size" = "" ] ; then
1429            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1430        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1431            continue
1432        else
1433            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1434                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1435                partition_format="vfat"
1436            fi
1437            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1438            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1439        fi
1440    done
1441    LogAll "-----------------------------------" 
1442}
1443
1444CheckMountlist() {
1445    local file=$1
1446    # Coherency verification
1447    ML01=`cat $file | wc -l`
1448    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1449    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1450    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1451    if [ "$ML01" -ne "$ML1" ]; then
1452        LogFile "--------------------------------------------"
1453        LogAll "WARNING: Duplicate device entry in mountlist"
1454        LogFile "--------------------------------------------"
1455    fi
1456    if [ "$ML02" -ne "$ML2" ]; then
1457        LogFile "--------------------------------------------"
1458        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1459        LogFile "------------------------------------------------"
1460    fi
1461}
1462
1463OfferToMakeBootableISO() {
1464    local i old_pwd
1465    if [ -z "$ISO_CMD" ]; then
1466        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1467        return
1468    fi
1469    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1470        echo -en "Shall I make a bootable CD image? (y/[n]) "
1471        read i
1472        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1473    fi
1474    rm -Rf $MINDI_TMP/iso
1475    mkdir -p $MINDI_TMP/iso/{images,archives}
1476    LogFile "INFO: mindi_lib = $MINDI_LIB"
1477    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1478    for i in memdisk memtest.bin memtest.img ; do
1479        j=$MINDI_LIB/$i
1480        k=$MINDI_TMP/iso
1481        if [ -e "$j" ] ; then
1482            LogAll "INFO: Copying $j to $k"
1483            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1484            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1485            if [ _"$MONDO_SHARE" != _"" ]; then 
1486                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1487            fi
1488        fi
1489    done
1490    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1491    if [ $KERNEL_IS_XEN = "yes" ]; then
1492        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1493        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1494    fi
1495    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1496    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1497
1498    if [ _"$MONDO_SHARE" != _"" ]; then 
1499        if [ $KERNEL_IS_XEN = "yes" ]; then
1500            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1501            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1502        fi
1503        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1504        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1505    fi
1506    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1507    if [ "$ARCH" != "ia64" ] ; then
1508        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1509    fi
1510    old_pwd=`pwd`
1511    cd "$MINDI_TMP/iso"
1512    if [ "$ARCH" != "ia64" ] ; then
1513        if [ _"$MONDO_SHARE" != _"" ]; then 
1514            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1515            if [ $KERNEL_IS_XEN = "yes" ]; then
1516                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1517            fi
1518            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1519        fi
1520        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1521    else
1522        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1523    fi
1524    if [ "$?" -ne "0" ] ; then
1525        LogFile "----------- $ISO_CMD's errors --------------"
1526        LogAll "$ISO_CMD returned the following errors:"
1527        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1528        LogAll "ERROR: Failed to create ISO image."
1529    else
1530        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1531    fi
1532    rm -f $MINDI_TMP/mkisofs.log
1533    cd "$old_pwd"
1534}
1535
1536
1537OfferToMakeBootableUSB() {
1538    local i
1539    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1540        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1541        read i
1542        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1543        if [ "$USBDEVICE" = "" ]; then
1544            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1545            read dev
1546            USBDEVICE=$dev
1547        fi
1548        echo "WARNING: This will erase all content on $USBDEVICE"
1549        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1550        read i
1551        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1552    fi
1553    rm -Rf $MINDI_TMP/usb
1554    mkdir -p $MINDI_TMP/usb
1555    USBPART="${USBDEVICE}1"
1556
1557    echo -en "Transforming $USBDEVICE in a Bootable device " 
1558    echo -en "."
1559    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1560    LogFile "INFO: Checking $USBDEVICE"
1561    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1562    if [ $? -ne 0 ]; then
1563        LogAll "ERROR: Unable to access $USBDEVICE"
1564        LogAll "       Make sure your USB device is plugged in"
1565        MindiExit -1
1566    fi
1567    echo -en "."
1568    # Some distro do auto mount at that point (Ubuntu)
1569    LogFile "INFO: Unmounting $USBPART just in case"
1570    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1571    # If your key has no MBR it may cause an issue
1572    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1573    if [ -r $MBRFILE ]; then
1574        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1575        dd if=$MBRFILE of=$USBDEVICE
1576    else
1577        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1578        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1579    fi
1580    LogFile "INFO: Preparing $USBDEVICE"
1581    cat > $MINDI_TMP/fdisk.txt << EOF
1582d
1583d
1584d
1585d
1586n
1587p
15881
1589
1590
1591t
1592b
1593a
15941
1595w
1596EOF
1597    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1598    if [ $? -ne 0 ]; then
1599        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1600        LogAll "       Make sure your USB device is plugged in"
1601        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1602        MindiExit -1
1603    fi
1604    LogFile "fdisk build file"
1605    LogFile "----------------"
1606    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1607    LogFile "----------------"
1608    rm -f $MINDI_TMP/fdisk.txt
1609    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1610    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1611    echo -en "."
1612    # Calling kpartx in case devices were not created
1613    if [ -x "/sbin/kpartx" ]; then
1614        /sbin/kpartx -a $USBDEVICE
1615    fi
1616    # Some distro do auto mount at that point (Ubuntu)
1617    LogFile "INFO: Unmounting $USBPART just in case again"
1618    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1619    echo -en "."
1620    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1621    if [ "`which dmsetup`" != "" ]; then
1622        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1623        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1624            LogFile "INFO: Removing $block_id from device mapper."
1625            sleep 1
1626            dmsetup remove $block_id
1627        fi
1628    fi
1629    echo -en "."
1630    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1631    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1632    if [ $? -ne 0 ]; then
1633        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1634        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1635        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1636        MindiExit -1
1637    fi
1638    echo -en "."
1639    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1640    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1641    if [ $? -ne 0 ]; then
1642        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1643        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1644        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1645        MindiExit -1
1646    fi
1647    echo -en "."
1648    mkdir -p $MINDI_TMP/usb/images
1649    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1650    echo -en "."
1651    LogFile "INFO: mindi_lib = $MINDI_LIB"
1652    for i in memdisk memtest.bin memtest.img ; do
1653        j=$MINDI_LIB/$i
1654        k=$MINDI_TMP/usb
1655        if [ -e "$j" ] ; then
1656            LogIt "INFO: Copying $j to $k"
1657            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1658            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1659        fi
1660    done
1661    echo -en "."
1662    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1663    echo -en "."
1664    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1665    echo -en "."
1666    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1667    echo -en "."
1668    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1669    echo -en "."
1670    LogAll "----------- syslinux's conf --------------"
1671    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1672    LogAll "------------------------------------------"
1673    umount $MINDI_TMP/usb
1674    if [ "$ARCH" != "ia64" ] ; then
1675        syslinux -v 2>&1 | grep -q 4.02
1676        if [ $? -eq 0 ]; then
1677            # This buggy version of syslinux requires a call to --stupid and not -s
1678            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1679            res=$?
1680        else
1681            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1682            res=$?
1683        fi
1684        if [ $res -ne 0 ] ; then
1685            LogAll "----------- syslinux's errors --------------"
1686            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1687            LogAll "------------------------------------------"
1688            LogIt "ERROR: Failed to create USB image."
1689        else
1690            echo -e "$DONE"
1691            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1692        fi
1693        rm -f $MINDI_TMP/syslinux.log
1694    else
1695        LogAll "ERROR: No USB boot support for ia64"
1696        MindiExit -1
1697    fi
1698}
1699
1700
1701MakeMessageFile() {
1702   
1703    if [ -x "/bin/lsb_release" ]; then
1704        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1705    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1706        DESC="Arch Linux"
1707        if [ -r /var/log/pacman.log ]; then
1708            # there are no releases but we can get the last system upgrade
1709            # Output example:   Arch Linux [2011-03-03 01:39]
1710            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1711        fi
1712    elif [ -r /etc/issue.net ]; then
1713        DESC=`head -1 /etc/issue.net`
1714    elif [ -r /etc/issue ]; then
1715        DESC=`head -1 /etc/issue`
1716    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1717        # For pb >= 0.9.8
1718        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1719    else
1720        DESC="Unknown desc"
1721    fi
1722    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1723    if [ _"$MONDO_SHARE" != _"" ]; then
1724        if [ "$CDRECOVERY" != "yes" ] ; then
1725            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1726                echo -en "Press <enter> to continue.\n"
1727            elif [ ! "$MINDI_TMP" ] ; then
1728                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1729                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1730                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1731                fi
1732            else
1733                echo -en "$BOOT_MEDIA_MESSAGE"
1734            fi
1735        else
1736            echo -en "\
1737To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1738CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1739        fi
1740    fi
1741
1742    # Also create the other help screens
1743    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1744    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1745    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1746}
1747
1748
1749MakeBootConfFile() {
1750    local options i ooo
1751    options=""
1752    # Type of boot file (elilo or syslinux/isolinux)
1753    type=$1
1754    if [ "$type" = "elilo" ]; then
1755        sep="="
1756    else
1757        sep=" "
1758    fi
1759
1760    # Generic header for conf file
1761    if [ "$type" != "elilo" ] ; then
1762        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1763    else
1764        echo -en "prompt\n"
1765    fi
1766
1767    # Compute which default option to boot from
1768    if [ "$CDRECOVERY" = "yes" ] ; then
1769        echo -en "default${sep}RESTORE\n"
1770    # In case it's mondoarchive
1771    elif [ _"$MONDO_SHARE" != _"" ]; then
1772        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1773            echo -en "default${sep}iso\n"
1774        else
1775            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1776        fi
1777    else
1778        echo -en "default${sep}expert\n"
1779    fi
1780
1781    # Handle timeout
1782    if [ "$CDRECOVERY" != "yes" ] ; then
1783        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1784    else
1785        echo -en "timeout${sep}10000\n"
1786    fi
1787    echo -en "\n"
1788
1789    # prepare which labels will be generated
1790    if [ "$CDRECOVERY" = "yes" ] ; then
1791        options="RESTORE expert"
1792    else
1793        if [ _"$MONDO_SHARE" != _"" ]; then
1794            options="interactive expert compare iso nuke isonuke"
1795        else
1796            options="expert"
1797        fi
1798    fi
1799
1800    # Generate rest of conf file
1801    for i in $options ; do
1802        ooo=$i
1803        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1804        if [ "$type" = "elilo" ]; then
1805            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1806        else
1807            ps="/"
1808            if [ "$type" = "syslinux" ]; then
1809                ps=""
1810            fi
1811            if [ $KERNEL_IS_XEN = "no" ]; then
1812                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1813            else
1814                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1815            fi
1816        fi
1817        echo -en "$outstr"
1818    done
1819    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1820        if [ "$type" = "elilo" ]; then
1821            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1822            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1823        else
1824            ps="/"
1825            if [ "$type" = "syslinux" ]; then
1826                ps=""
1827            fi
1828            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1829            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1830        fi
1831    fi
1832}
1833
1834
1835PrepareBootDiskImage_LILO() {
1836    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1837    imagesdir=$MINDI_CACHE
1838    kernelpath=$1
1839
1840    retval=0
1841
1842    old_pwd=`pwd`
1843    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1844    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1845    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1846    echo -en "..."
1847    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1848    mountpoint=$MINDI_TMP/mountpoint.$$
1849    mkdir -p $mountpoint
1850    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1851    LogFile "Creating vfat filesystem on $imagefile" 
1852    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1853    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1854
1855    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1856    mkdir -p $mountpoint/etc
1857    liloconf=$mountpoint/elilo.conf
1858
1859    MakeBootConfFile elilo > $liloconf
1860
1861    # Copy it so that CD-ROM menu entry is satisfied
1862    mountefi=0
1863    df -T | grep /boot/efi | grep -q vfat
1864    if [ $? -ne 0 ]; then
1865        mount /boot/efi
1866        if [ $? -ne 0 ]; then
1867            echo "You have to mount your EFI partition when using mindi"
1868            MindiExit -1
1869        fi
1870        mountefi=1
1871    fi
1872    el=`find /boot/efi -name elilo.efi`
1873    cp $el $mountpoint
1874    cp $liloconf $mountpoint
1875    if [ $mountefi -eq 1 ]; then
1876        umount /boot/efi 2>&1 > /dev/null
1877    fi
1878
1879    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1880    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1881    if [ "$?" -ne "0" ] ; then
1882        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1883        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1884        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1885        rm -f $MINDI_TMP/mtpt.$$
1886        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1887        retval=$(($retval+1))
1888    fi
1889    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1890
1891    mkdir -p $mountpoint/tmp
1892    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1893        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1894    fi
1895
1896    # copy the kernel across
1897    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1898    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1899    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1900    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1901    if [ "$?" -ne "0" ] ; then
1902        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1903        du -sk $mountpoint/* >> $LOGFILE
1904        LogFile "--- end of list of files ---"
1905        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1906        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1907        cd "$old_pwd"
1908        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1909        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1910    #   losetup /dev/loop0 -d
1911        [ "$imagefile" != "" ] && rm -f $imagefile
1912        LogIt "ERROR: Sorry, your kernel is too big for your image"
1913        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1914        return 0
1915    fi
1916    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1917    LogFile "INFO: Free space left on image = $free_space KB"
1918    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1919    # make it bootable
1920    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1921    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1922    if [ "$KERN_DISK_MADE" ] ; then
1923        LogFile "INFO: Not running LILO. It's not that kind of disk."
1924    fi
1925
1926    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1927    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1928    echo -en "..."
1929    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1930    if [ "$retval" -eq "0" ] ; then
1931        echo -en "...$DONE\n"
1932        if [ "$KERN_DISK_MADE" ] ; then
1933            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1934        fi
1935    else
1936        echo -en "...failed\n"
1937        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1938        [ "$imagefile" != "" ] && rm -f $imagefile
1939    fi
1940    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1941    return $retval
1942}
1943
1944
1945PrepareBootDiskImage_ISOLINUX() {
1946    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1947    imagesdir=$MINDI_CACHE
1948    kernelpath=$1
1949    do_boot_root_thingy=""
1950    retval=0
1951
1952    old_pwd=`pwd`
1953    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1954    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1955    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1956    echo -en "..."
1957    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1958    mountpoint=$MINDI_TMP/mountpoint.$$
1959    mkdir -p $mountpoint
1960    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1961    LogFile "INFO: Creating vfat filesystem on $imagefile"
1962    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1963    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1964    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1965
1966    # Only move it now to its final destination and use it now
1967    mv $imagefile $imagesdir
1968    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1969
1970    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1971
1972    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1973    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1974    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1975    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1976    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1977    if [ "$?" -ne "0" ] ; then
1978        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1979        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1980        LogAll "       Please unload some of your modules and try again."
1981        rm -f $MINDI_TMP/mtpt.$$
1982        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1983        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1984        retval=$(($retval+1))
1985    fi
1986
1987    mkdir -p $mountpoint/tmp
1988    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1989        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1990    fi
1991
1992    # copy the kernel across
1993    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1994    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1995    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1996         
1997    retval=0
1998    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1999    retval=$?
2000    if [ $KERNEL_IS_XEN = "yes" ]; then
2001        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2002        let retval+=$?
2003    fi
2004 
2005    if [ "$retval" -ne "0" ] ; then
2006        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2007        du -sk $mountpoint/* >> $LOGFILE
2008        LogFile "--- end of list of files ---"
2009        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2010        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2011        cd "$old_pwd"
2012        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2013        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2014
2015        LogIt "ERROR: Sorry, your kernel is too big for your image"
2016        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2017    fi
2018    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2019    LogFile "INFO: Free space left on image = $free_space KB"
2020    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2021
2022    # make it bootable
2023    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2024    mkdir -p $mountpoint/etc
2025    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2026    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2027    echo -en "..."
2028    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2029
2030    if [ "$retval" -eq "0" ] ; then
2031        echo -en "...$DONE\n"
2032        if [ "$KERN_DISK_MADE" ] ; then
2033            [ "$imagefile" != "" ] && rm -f $imagefile
2034            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2035        fi
2036    else
2037        echo -en "...failed\n"
2038        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2039        [ "$imagefile" != "" ] && rm -f $imagefile
2040    fi
2041    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2042    return $retval
2043}
2044
2045
2046ParseModprobeForIncludes() {
2047local MODPROBE_CONF mpincfile includes include
2048
2049MODPROBE_CONF=/etc/modprobe.conf
2050mpincfile=$1
2051touch $mpincfile
2052if [ -a $MODPROBE_CONF ]; then
2053    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2054    if [ -n "$includes" ]; then
2055        for include in $includes
2056        do
2057            if [ -a "$include" ]; then
2058                echo $include >> $mpincfile
2059            fi
2060        done
2061    fi
2062fi
2063}
2064
2065
2066PrepareDataDiskImages() {
2067    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2068
2069    imagesdir=$MINDI_CACHE
2070    rm -f $imagesdir/mindi.iso
2071    needlist=$MINDI_TMP/what-we-need.txt
2072    bigdir=$MINDI_TMP/bigdir
2073    mkdir -p $bigdir/usr/bin
2074    mkdir -p $bigdir/usr/sbin
2075    includefile=$MINDI_TMP/$$.includefile.txt
2076
2077    # Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
2078    if [ -h "/lib64" ]; then
2079        mkdir -p lib || LogIt "ERROR: Unable to create lib in $mountpoint."
2080        if [ ! -h lib64 ]; then
2081            ln -s lib lib64 || LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2082        fi
2083    fi
2084    if [ -h "/lib" ]; then
2085        mkdir -p usr/lib || LogIt "ERROR: Unable to create usr/lib in $mountpoint."
2086        mv lib/* usr/lib 2> /dev/null
2087        if [ -d "lib" ]; then
2088            rmdir lib
2089        fi
2090    fi
2091    # Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2092    if [ -h "/sbin" ]; then
2093        mkdir -p usr/sbin || LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
2094        mv sbin/* usr/sbin 2> /dev/null
2095        if [ -d "sbin" ]; then
2096            rmdir sbin
2097        fi
2098    fi
2099    if [ -h "/bin" ]; then
2100        mkdir -p usr/bin || LogIt "ERROR: Unable to create usr/bin in $mountpoint."
2101        mv bin/* usr/bin 2> /dev/null
2102        if [ -d "bin" ]; then
2103            rmdir bin
2104        fi
2105    fi
2106
2107    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2108    if [ -e "$DEPLIST_FILE" ]; then
2109        lfiles="$DEPLIST_FILE $lfiles"
2110    fi
2111    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2112    ParseModprobeForIncludes $includefile
2113    lines=$(($lines+`cat $includefile | wc -l`))
2114    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2115    res=$?
2116    rm -f $includefile
2117    if [ "$YOUR_KERNEL_SUCKS" ]; then
2118        pwd=`pwd`
2119        cd "$MINDI_TMP"
2120        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2121            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2122        done
2123        for i in $EXTRA_MODS ; do
2124            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2125            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2126            for k in $j ; do
2127                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2128                LogFile "INFO: Added failsafe module $k to ramdisk"
2129            done
2130        done
2131        cd "$pwd"
2132    else
2133        ListKernelModulePaths >> $needlist
2134    fi
2135    if [ "$res" -ne "0" ] ; then
2136        Die "You have $res files present in dependency list\nbut absent from filesystem."
2137    fi
2138    FindAndAddUserKeyboardMappingFile
2139    mkdir -p $bigdir/tmp
2140    if [ _"$MONDO_SHARE" != _"" ]; then
2141        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2142        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2143    fi
2144    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2145    DropOptimizedLibraries $needlist $bigdir
2146    echo -en "Assembling dependency files"
2147
2148    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2149
2150    # also copy io.sys and msdos.sys, if we can find them
2151    for i in `mount | cut -d' ' -f3` ; do
2152        for j in io.sys msdos.sys ; do
2153            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2154        done
2155    done
2156
2157    # master boot record, too
2158    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2159    if [ "$i" ] ; then
2160        LogAll "INFO: Backing up $i's MBR"
2161        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2162        sleep 1
2163        sync
2164        j=$i
2165        [ -h "$j" ] && j=`readlink -f $j`
2166        LogAll "INFO: Creating /dev/boot_device ($j)"
2167        mkdir -p $bigdir/dev
2168        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2169    fi
2170
2171    old_pwd=`pwd`
2172    cd "$bigdir"
2173
2174    # Get terminfo content
2175    ti="usr/share/terminfo/l"
2176    if [ -d /$ti ]; then
2177        mkdir -p $ti
2178        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2179    fi
2180    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2181        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2182        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2183    fi
2184    if [ -d "/lib/dev-state" ]; then 
2185        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2186    fi
2187    cd "$old_pwd"
2188    echo -e "$DONE"
2189    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2190    MakeMountlist $MINDI_TMP/mountlist.txt
2191    CheckMountlist $MINDI_TMP/mountlist.txt
2192    mkdir -p $bigdir/tmp
2193    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2194    if [ _"$MONDO_SHARE" != _"" ]; then
2195        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2196    fi
2197    if [ $LVM != "false" ]; then
2198        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2199        if [ "$?" -ne "0" ]; then
2200            LVM="false"
2201            rm -f $bigdir/tmp/i-want-my-lvm
2202        else
2203            LogFile "Your i-want-my-lvm file content is:"
2204            LogFile "-----------------------------------"
2205            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2206            LogFile "-----------------------------------"
2207        fi
2208    fi
2209    LogFile "Your mountlist.txt file content is:"
2210    LogFile "-----------------------------------"
2211    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2212    LogFile "-----------------------------------"
2213
2214    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2215    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2216    if [ _"$MONDO_SHARE" != _"" ]; then
2217        for q in filelist.full.gz biggielist.txt ; do
2218            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2219            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2220        done
2221    fi
2222
2223    echo -en "Tarring and zipping the data content..."
2224    size_of_all_tools=`du -sk $bigdir | cut -f1`
2225    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2226    LogFile "Size of the data content"
2227    LogFile "------------------------"
2228    du -sk $imagesdir/*gz >> $LOGFILE
2229    LogFile "------------------------"
2230    echo -e "$DONE"
2231
2232    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2233    rm -rf $bigdir
2234    rm -f $needlist
2235}
2236
2237
2238ProcessLDD() {
2239    local incoming f d nd bd bnd
2240    read incoming
2241    while [ "$incoming" != "" ]; do
2242        # We take the full path name of the dyn. lib. we want
2243        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2244        for f in $incoming ; do
2245            # echo modified file name if one of the parent dir is a link
2246            # by replacing the original dirname by the destination of the link
2247            d="`dirname $f`"
2248            found="false"
2249            while [ "$d" != "/" ]; do
2250                if [ -h "$d" ]; then
2251                    nd=`readlink -f $d`
2252                    bd=`basename $d`
2253                    bnd=`basename $nd`
2254                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2255                    echo $d
2256                fi
2257                d="`dirname $d`"
2258            done
2259
2260            echo "$f"
2261            echo "`ReadAllLink $f`"
2262        done
2263        read incoming
2264    done
2265}
2266
2267
2268Prompt() {
2269    echo -en "$1"
2270    read line
2271}
2272
2273
2274ReadLine() {
2275    local i incoming
2276    read incoming
2277    i=0
2278    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2279        i=$(($i+1))
2280        read incoming
2281    done
2282    echo "$incoming"
2283}
2284
2285
2286SizeOfPartition() {
2287    local devpath drive res stub
2288    device=$1
2289    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2290        Die "Cannot find $device's size - is your /etc/fstab sane?"
2291    fi
2292    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2293        res=`SizeOfRaidPartition $device`
2294        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2295        echo "$res"
2296        return 0
2297    fi
2298    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2299    res=`$FDISK -s $device 2>> $LOGFILE`
2300    # end patch
2301    # take only the first in case of multiple mount (cifs, nfs, ...)
2302    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2303    [ "$res" = "" ] && res="-1"
2304    echo $res
2305    return 0
2306}
2307
2308
2309SizeOfRaidPartition() {
2310    local real_dev smallest_size silly tmp
2311
2312    silly=999999999
2313    smallest_size=$silly
2314
2315    for real_dev in `GetRaidDevMembers $1` ; do
2316        tmp=`SizeOfPartition $real_dev`
2317        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2318    done
2319
2320    if [ "$smallest_size" = "$silly" ] ; then
2321        echo "-1"
2322        return 1
2323    else
2324        echo "$smallest_size"
2325        return 0
2326    fi
2327}
2328
2329
2330StripExecutable()
2331{
2332    local tmpfile
2333
2334    tmpfile=$MINDI_TMP/stripped.$$.dat
2335    [ -d "$1" ] || [ -h "$1" ] && return
2336    cp -f $1 $tmpfile 2>> $LOGFILE
2337    strip $tmpfile 2> /dev/null
2338    if [ "$?" -eq "0" ] ; then
2339        cp -f $tmpfile $1 2>> $LOGFILE
2340        LogFile "INFO: Stripped binary $2"
2341    fi
2342    rm -f $tmpfile
2343}
2344
2345KernelVer() {
2346        local fkern_ver fname
2347
2348        fname=$1
2349        file $fname | grep -q gzip
2350        if [ "$?" -eq "0" ] ; then
2351            # Used by ia64
2352            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2353        else
2354            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2355        fi
2356        echo "$fkern_ver"
2357}
2358
2359
2360# WARNING: This function should just echo the final result !!!
2361#
2362TryToFindKernelPath() {
2363    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2364
2365    we_want_version=$KERVERRUN
2366    possible_kernels=""
2367    duff_kernels=""
2368    output=""
2369   
2370    if [ "$ARCH" = "ia64" ] ; then
2371       root="/boot/efi/efi"
2372    else
2373       root="/"
2374    fi
2375    # See if we're booted from a Xen kernel
2376    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2377    if [ -f /proc/xen/capabilities ]; then
2378        # It's a Xen kernel
2379        KERNEL_IS_XEN="yes"
2380        LogFile "INFO: It's a Xen kernel..."
2381    fi
2382
2383    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2384        [ ! -e "$fname" ] && continue
2385        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2386        fkern_ver=`KernelVer $fname`
2387        [ "$fkern_ver" = "" ] && continue
2388        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2389        [ -f "$fname" ] || continue
2390        [ -h "$fname" ] && continue
2391        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2392        file $fname | grep -q gzip
2393        if [ "$?" -eq "0" ] ; then
2394            # Used by ia64
2395            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2396                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2397                duff_kernels="$fname $duff_kernels"
2398            else
2399                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2400                possible_kernels="$fname $possible_kernels"
2401            fi
2402        else
2403            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2404                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2405                duff_kernels="$fname $duff_kernels"
2406            else
2407                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2408                possible_kernels="$fname $possible_kernels"
2409            fi
2410        fi
2411    done
2412    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2413        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2414    fi
2415    if [ ! "$possible_kernels" ] ; then
2416        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2417        possible_kernels="$duff_kernels"
2418        if [ ! "$possible_kernels" ] ; then
2419            LogAll "INFO: Sorry, no duff kernels either"
2420        else
2421            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2422            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2423        fi
2424    fi
2425    if [ $KERNEL_IS_XEN = "yes" ]; then
2426        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2427        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2428        FindMboot32Binary
2429    fi
2430    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2431    noof_kernels=`CountItemsIn "$possible_kernels"`
2432    if [ "$noof_kernels" -eq "0" ] ; then
2433        LogAll "Could not find your kernel."
2434        if [ -e "/boot/vmlinuz" ] ; then
2435            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2436            output=/boot/vmlinuz
2437        else
2438            output=""
2439        fi
2440    elif [ "$noof_kernels" -eq "1" ] ; then
2441        kp=`echo "$possible_kernels" | sed s/' '//`
2442        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2443        output="$kp"
2444    else
2445        for i in $possible_kernels ; do
2446            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2447                LogAll "INFO: OK, I used my initiative and found that "
2448                LogAll "INFO: $i is probably your kernel. "
2449                output="$i"
2450                break
2451            fi
2452        done
2453        if [ ! -n "$output" ]; then
2454            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2455                output=/boot/vmlinuz
2456                LogFile "INFO: Schlomo, this one's for you."
2457            else
2458                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2459                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2460                LogFile "INFO: $possible_kernels"
2461                output=""
2462            fi
2463        fi
2464    fi
2465    if [ $KERNEL_IS_XEN = "yes" ]; then
2466        if [ "$noof_xenkernels" -eq "0" ]; then
2467            xenkernelpath=""
2468        elif [ "$noof_xenkernels" -eq "1" ]; then
2469            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2470            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2471        else
2472            for i in $possible_xenkernels ; do
2473                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2474                    LogFile "INFO: OK, I used my initiative and found that "
2475                    LogFile "INFO: $i is probably your Xen kernel. "
2476                    xenkernelpath="$i"
2477                    break
2478                fi
2479            done
2480            if [ ! -n "$xenkernelpath" ]; then
2481                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2482                if [ ! -n "$new_possible_xenkernels" ]; then
2483                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2484                    LogFile "INFO: Using $xenkernelpath"
2485                else
2486                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2487                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2488                    LogFile "INFO: $possible_xenkernels"
2489                    output=""
2490                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2491                    LogFile "INFO: Using $xenkernelpath"
2492                fi
2493            fi
2494        fi
2495        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2496            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2497        fi
2498    fi
2499    LogAll "TryToFindKernelPath found $output"
2500    echo "$output"
2501}
2502
2503
2504TurnTgzIntoRdz() {
2505    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2506
2507    tgz_dir_fname=$1
2508    rdz_fname=$2
2509    kernelsize=$3
2510    maxsize=$(($BOOT_SIZE-$kernelsize))
2511    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2512    tempfile=$MINDI_TMP/temp.rd
2513    mountpoint=$MINDI_TMP/mnt1
2514    res=0
2515    echo -en "..."
2516    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2517    echo -en "..."
2518    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2519    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2520    echo -en "..."
2521    mkdir -p $mountpoint
2522    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2523    echo -en "..."
2524    old_pwd=`pwd`
2525    cd "$mountpoint"
2526
2527   
2528    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2529    for f in $tgz_dir_fname/*; do 
2530        if [ ! -r $f ]; then
2531            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2532        else
2533            cp -Rdf $f . 2>&1 >> $LOGFILE
2534        fi
2535    done
2536    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2537
2538    cd dev || Die "Can't cd to dev"
2539    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2540    rm -f dev-entries.tgz
2541    cd ..
2542
2543    for w in insmod.static insmod.static.old ; do
2544        s=`which $w 2> /dev/null`
2545        if [ -e "$s" ] ; then
2546            tar cf - -C / $s 2> /dev/null | tar xf -
2547        fi
2548    done
2549
2550    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2551   
2552    # Copy of files mandatory for ssh to automate mount if sshfs is used
2553    mkdir $mountpoint/.ssh
2554    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2555    echo > $mountpoint/tmp/myssh << EOF
2556ssh -o StrictHostKeyChecking=no $*
2557EOF
2558    chmod 755 $mountpoint/tmp/myssh
2559
2560    # Copy of files mandatory for ld.so
2561    cp -rp /etc/ld.so.c* $mountpoint/etc
2562
2563    # Handle the case where busybox and mount are dynamically linked
2564    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2565    if [ $? -eq 0 ]; then
2566        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2567        rm -f bin/mount
2568    fi
2569
2570    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2571    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2572    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2573        if [ -r $f ]; then
2574            echo $f >> $MINDI_TMP/minimal.lis
2575            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2576        fi
2577    done
2578    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2579        ReadAllLink $f >> $MINDI_TMP/minimal.lis
2580    done
2581    # Initial / are trucated by tar
2582    finallist=""
2583    # Remove directories from the list, as tar will create them anyway
2584    # and it may hurt if /lib is in it as on Debian/Ubuntu
2585    # recent bash says that -d is true for a link to a dir !
2586    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2587        if [ -e $f -a ! -d $f ] || [ -h $f -a ! -d $f ]; then
2588            finallist="$finallist $f"
2589        fi
2590    done
2591    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2592
2593    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2594    ln -sf /bin/bash bin/sh
2595    LogIt "INFO: Using bash as default shell"
2596    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2597
2598    # Avoids an issue on some distro (RHEL5)
2599    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2600
2601    mkdir -p $mountpoint/tmp
2602    # Management of udev (which includes modprobe in rules)
2603    ps auxww | grep -v grep | grep -qw udevd
2604    if [ $? -eq 0 ]; then
2605        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2606        LogIt "INFO: udev device manager found"
2607        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2608        # This avoids NIC remapping if on another machine at restore time on Debian at least
2609        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2610        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2611        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2612        # Do not do it if it's a link (Ubuntu 64 bits #503)
2613        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [  ! -h "/lib64/udev" ]; then
2614            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2615        fi
2616        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2617            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2618        fi
2619        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2620            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2621        fi
2622        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2623            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2624            lis=""
2625            # Get only the files which exist in that list
2626            # and potentially their symlink structure
2627            for i in $lis2; do
2628                if [ -h $i ]; then
2629                    j=$i
2630                    while [ -h $j ]; do
2631                        lis="$lis $j"
2632                        j=`readlink $j`
2633                    done
2634                    lis="$lis $j"
2635                elif [ -f $i ]; then
2636                    lis="$lis $i"
2637                fi
2638            done
2639            # And their deps
2640            LocateDeps $lis > $MINDI_TMP/udev.lis
2641            for i in $lis; do
2642                if [ "`echo $i | cut -c1`" = "/" ]; then
2643                    j=`echo $i | cut -c2-`
2644                    [ "$j" != "" ] && rm -f $j
2645                fi
2646            done
2647            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2648            rm -f $MINDI_TMP/udev.lis
2649        else
2650            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2651            LogAll "         mindi will use static devices which may cause problems"
2652            rm -f $mountpoint/tmp/USE-UDEV
2653        fi
2654    fi
2655
2656    # Management of potential HW info (ProLiant only at the moment)
2657    rm -rf $MINDI_CACHE/bkphw
2658    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2659    if [ -d $MINDI_CACHE/bkphw ]; then
2660        LogIt "INFO: Hardware Information found and saved ..."
2661        cp -rp $MINDI_CACHE/bkphw .
2662        if [ -f $MINDI_CACHE/tools.files ]; then
2663            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2664            LocateDeps $lis > $MINDI_TMP/tools.lis
2665            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2666        fi
2667        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2668            mv -f $MINDI_CACHE/mindi-rsthw .
2669            chmod 755 ./mindi-rsthw
2670        fi
2671        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2672    fi
2673
2674    # Management of perl scripts delivered needed at restore time
2675    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2676    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2677
2678    for w in cdrom groovy-stuff ; do
2679        mkdir -p mnt/$w
2680    done
2681
2682    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2683
2684    cd "$old_pwd"
2685    echo -en "..."
2686    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2687        cd "$MINDI_TMP"
2688        needed_modules_path=lib/modules/$FAILSAFE_KVER
2689    else
2690        cd /
2691        if [ "${kernelname}" != "" ]
2692        then
2693            needed_modules_path=lib/modules/${kernelname}
2694        else
2695            needed_modules_path=lib/modules/$KERVERRUN
2696        fi
2697    fi
2698
2699    needed_modules=""
2700    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2701
2702    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2703        # For PXE boot
2704        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2705    fi
2706    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2707        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2708    fi
2709    for i in $DENY_MODS; do
2710        LogFile "INFO: Removing $i from the list of modules to load"
2711        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2712    done
2713
2714    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2715    for i in $list_of_groovy_mods ; do
2716        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2717    done
2718
2719    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2720        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2721        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2722        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2723        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2724        # Uncompress modules if not using udev and native modprobe
2725        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2726            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2727                LogFile "INFO: Uncompressing $i"
2728                gunzip -f $mountpoint/$i
2729            fi
2730        fi
2731        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2732            echo "Replacing module symlink ($i) with actual file"
2733            rm -f $mountpoint/$i
2734            cp -Lf $i $mountpoint/$i
2735            ls -l $mountpoint/$i
2736        fi
2737    done
2738
2739    # Also copy modules.* in case of udev so that normal modprobe works
2740    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2741
2742    # Copy FW in case some drivers needs it
2743    for d in "/lib" "/usr/lib"; do
2744        if [ -d "$d/firmware" ]; then
2745            cp -a "$d/firmware" "$mountpoint/$d"
2746        fi
2747    done
2748
2749    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2750    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2751        if [ -d "$d/multipath" ]; then
2752            cp -a "$d/multipath" "$mountpoint/$d"
2753        fi
2754    done
2755
2756    # Copy an additional ProLiant tool for OBDR support
2757    if [ -f $MINDI_TMP/OBDR ]; then
2758        found=0
2759        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2760            mkdir -p $mountpoint/usr/bin
2761            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2762            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2763            found=1
2764        fi
2765        if [ -x /usr/bin/sg_wr_mode ]; then
2766            mkdir -p $mountpoint/usr/bin
2767            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2768            LocateDeps $lis > $MINDI_TMP/obdr.lis
2769            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2770            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2771            found=1
2772        fi
2773        if [ $found -eq 0 ]; then
2774            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2775            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2776        fi
2777    fi
2778
2779    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2780        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2781        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2782        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2783        rm -f $mountpoint/sbin/devfsd
2784    fi
2785    cd "$old_pwd"
2786    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2787    if [ _"$MONDO_SHARE" != _"" ]; then
2788        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2789        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2790        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2791        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2792        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2793        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2794        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2795        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2796        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2797    fi
2798    mkdir -p $mountpoint/proc
2799    LogFile "---------------------------"
2800    LogFile "Content of initial ramdisk:"
2801    LogFile "---------------------------"
2802    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2803    LogFile "---------------------------"
2804
2805    # Determine what filesystem to use for initrd image
2806    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2807    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2808    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2809    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2810        # say what will be used
2811        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2812        # kernel expects linuxrc in ext2 filesystem
2813        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2814        # unmount loop filesystem and create image file using the standard approach
2815        umount $mountpoint || Die "Cannot unmount $tempfile"
2816        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2817        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2818            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2819        else
2820            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2821        fi
2822        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2823        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2824        rm -f ${rdz_fname}.tmp
2825        # log that we are done
2826        LogFile "      ...done."
2827    elif [ "$gvFileSystem" = "initramfs" ]; then
2828        # say what will be used
2829        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2830        # make sure that cpio is there
2831        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2832        # go into filesystem
2833        cd "$mountpoint"
2834        # kernel expects init in cpio filesystem
2835        ln -sf sbin/init init
2836        # create cpio image file and unmount loop filesystem
2837        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2838        cd "$old_pwd"
2839        umount $mountpoint || Die "Cannot unmount $tempfile"
2840        # log that we are done
2841        LogFile "      ...done."
2842    else
2843        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2844    fi
2845
2846    if [ "$res" -eq "0" ] ; then
2847        echo -en "..."
2848    else
2849        echo -en "\rMade an rdz WITH ERRORS.           \n"
2850    fi
2851    return 0
2852}
2853
2854
2855##############################################################################
2856#----------------------------------- Main -----------------------------------#
2857##############################################################################
2858
2859# Now we can create what we need
2860mkdir -p $MINDI_TMP
2861
2862# Purge from potential old run
2863if [ _"$MINDI_CACHE" = _"" ]; then
2864    Die "MINDI_CACHE undefined"
2865fi
2866
2867# --nolog needs to be first, and is used in analyze-my-lvm
2868if [ "$1" = "--nolog" ] ; then
2869    shift
2870    LOGFILE=/dev/stderr
2871else
2872    > $LOGFILE
2873fi
2874if [ "$1" = "--printvar" ] ; then
2875    shift
2876    if [ _"$1" != _"" ] ; then
2877        set | grep -Ew "^$1" | cut -d= -f2
2878    fi
2879    exit 0
2880fi
2881
2882LogFile "mindi v$MINDI_VERSION"
2883LogFile "$ARCH architecture detected"
2884LogFile "mindi called with the following arguments:"
2885echo "$@">> $LOGFILE
2886LogFile "Start date : `date`"
2887LogFile "-----------------------------"
2888
2889[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2890
2891# Log some capital variables
2892[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2893[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2894LogFile "MONDO_SHARE = $MONDO_SHARE"
2895LogFile "MINDI_LIB = $MINDI_LIB"
2896LogFile "MINDI_SBIN = $MINDI_SBIN"
2897LogFile "MINDI_CONF = $MINDI_CONF"
2898if [ -f $MINDI_CONFIG ]; then
2899    LogFile "-----------------------------"
2900    LogFile " Mindi configuration file    "
2901    LogFile "-----------------------------"
2902    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2903    LogFile "-----------------------------"
2904fi
2905LogFile "In Mindi"
2906LogFile "--------"
2907LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2908LogFile "BOOT_SIZE = $BOOT_SIZE"
2909LogFile "--------"
2910
2911trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2912
2913# Sanity checks
2914which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2915which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2916which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2917which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2918if which awk &> /dev/null ; then
2919    if ! which gawk &> /dev/null ; then
2920        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2921    fi
2922fi
2923which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2924[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2925
2926[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2927
2928# Update the PATH variable if incomplete
2929if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2930    PATH=$PATH:/sbin:/usr/sbin
2931    export PATH
2932    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2933    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2934    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2935fi
2936
2937# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2938if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2939    source $MINDI_LIB/FindDistroFailsafe
2940    # Log kernel image
2941    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2942else
2943    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2944fi
2945
2946if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2947    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2948fi
2949
2950### TODO
2951### Fix as it's not mandatory on ia64
2952if [ "$ARCH" = "ia64" ] ; then
2953    if which elilo &> /dev/null ; then
2954        LILO_EXE=elilo
2955    else
2956        LILO_EXE=`which false 2> /dev/null`
2957    fi
2958else
2959    FindIsolinuxBinary
2960fi
2961trap "Aborted" SIGTERM
2962DONE="\r\t\t\t\t\t\t\t\tDone.         "
2963kernelpath=""
2964MONDO_ROOT=/var/cache/mondo
2965mkdir -p $MONDO_ROOT
2966
2967if [ -d "/proc/lvm" ]; then
2968    # LVM v1
2969    LVMCMD=""
2970    LVM="v1"
2971elif [ -d "/dev/mapper" ]; then
2972    # LVM v2
2973    LVMCMD="lvm"
2974    LVM="v2"
2975else
2976    LVM="false"
2977fi
2978
2979if [ -e "/proc/cmdline" ]; then
2980    CMDLINE="/proc/cmdline"
2981elif [ -e "/tmp/cmdline" ]; then
2982    CMDLINE="/tmp/cmdline"
2983else
2984    CMDLINE="/dev/null"
2985fi
2986
2987LogFile "INFO: LVM set to $LVM"
2988LogFile "----------"
2989LogFile "mount result:"
2990LogFile "-------------"
2991mount >> $LOGFILE
2992if [ -e /etc/raidtab ]; then
2993    LogFile "-------------"
2994    LogFile "/etc/raidtab content:"
2995    LogFile "-------------"
2996    cat /etc/raidtab >> $LOGFILE
2997else
2998    LogFile "No file /etc/raidtab"
2999fi
3000if [ -e /etc/mdadm.conf ]; then
3001    LogFile "-------------"
3002    LogFile "/etc/mdadm.conf content:"
3003    LogFile "-------------"
3004    cat /etc/mdadm.conf >> $LOGFILE
3005else
3006    LogFile "-------------"
3007    LogFile "No file /etc/mdadm.conf"
3008fi
3009LogFile "-------------"
3010LogFile "cat $CMDLINE"
3011LogFile "-------------"
3012cat $CMDLINE >> $LOGFILE
3013LogFile "-------------"
3014LogFile "cat /proc/swaps:"
3015LogFile "-------------"
3016cat /proc/swaps >> $LOGFILE
3017LogFile "-------------"
3018if [ -e /proc/mdstat ]; then
3019    LogFile "cat /proc/mdstat:"
3020    LogFile "-------------"
3021    cat /proc/mdstat >> $LOGFILE
3022else
3023    LogFile "No pseudo file /proc/mdstat"
3024fi
3025LogFile "-------------"
3026LogFile "cat /proc/partitions:"
3027LogFile "-------------"
3028cat /proc/partitions >> $LOGFILE
3029LogFile "-------------"
3030LogFile "cat /proc/filesystems:"
3031LogFile "-------------"
3032cat /proc/filesystems >> $LOGFILE
3033LogFile "-------------"
3034LogFile "lsmod result:"
3035LogFile "-------------"
3036lsmod >> $LOGFILE
3037MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3038if [ -x /usr/sbin/esxcfg-module ]; then
3039    LogFile "-------------"
3040    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3041    LogFile "-------------"
3042    LogFile "VMWare modules"
3043    LogFile "-------------"
3044    /usr/sbin/esxcfg-module -l >> $LOGFILE
3045    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3046fi
3047LogFile "Liste of extra modules is:" 
3048LogFile "-------------" 
3049LogFile "$EXTRA_MODS" 
3050LogFile "-------------" 
3051LogFile "FORCE_MODS:"
3052LogFile "-------------"
3053LogFile "$FORCE_MODS"
3054LogFile "-------------"
3055LogFile "DENY_MODS:"
3056LogFile "-------------"
3057LogFile "$DENY_MODS"
3058LogFile "-------------"
3059LogFile "df result:"
3060LogFile "----------"
3061df -aT >> $LOGFILE
3062LogFile "-------------"
3063LogFile "df -i result:"
3064LogFile "----------"
3065df -i >> $LOGFILE
3066LogFile "-------------"
3067if [ -r /boot/grub/menu.lst ]; then
3068    LogFile "-------------"
3069    LogFile "INFO: /boot/grub/menu.lst content"
3070    LogFile "-------------"
3071    cat /boot/grub/menu.lst >> $LOGFILE
3072    LogFile "-------------"
3073fi
3074if [ -r /boot/grub/grub.conf ]; then
3075    LogFile "-------------"
3076    LogFile "INFO: /boot/grub/grub.conf content"
3077    LogFile "-------------"
3078    cat /boot/grub/grub.conf >> $LOGFILE
3079    LogFile "-------------"
3080fi
3081if [ -r /boot/grub/grub.cfg ]; then
3082    LogFile "-------------"
3083    LogFile "INFO: /boot/grub/grub.cfg content"
3084    LogFile "-------------"
3085    cat /boot/grub/grub.cfg >> $LOGFILE
3086    LogFile "-------------"
3087fi
3088if [ -r /boot/grub/device.map ]; then
3089    LogFile "-------------"
3090    LogFile "INFO: /boot/grub/device.map content"
3091    LogFile "-------------"
3092    cat /boot/grub/device.map >> $LOGFILE
3093    LogFile "-------------"
3094fi
3095if [ -r /etc/lilo.conf ]; then
3096    LogFile "-------------"
3097    LogFile "INFO: /etc/lilo.conf content"
3098    LogFile "-------------"
3099    cat /etc/lilo.conf >> $LOGFILE
3100fi
3101LogFile "Full fdisk info"
3102LogFile "---------------"
3103$FDISK -l >> $LOGFILE
3104LogFile "----------------"
3105LogFile "List of extra modules is:"
3106LogFile "$EXTRA_MODS"
3107LogFile "-------------"
3108
3109# Compute libata version
3110laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3111# If libata v2 is used then remove ide-generic as it will perturbate boot
3112if [ "`echo $MODULES | grep libata`" ]; then
3113    if [ "$laver" = "2" ]; then
3114        DENY_MODS="$DENY_MODS ide-generic"
3115        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3116        LogFile "-------------"
3117    fi
3118fi
3119
3120# Check for McAfee which disturbs the access to some files (tgz in articular)
3121if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3122    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3123    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3124    LogFile "WARNING: You have two options:"
3125    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3126    LogFile "WARNING:  - Disable the scanner during the backup"
3127fi
3128
3129# Check for ISO_CMD command
3130if [ ! -x $ISO_CMD ]; then
3131    LogFile "NOTE: No CD image (ISO file) utility found"
3132fi
3133
3134FLOPPY_WAS_MOUNTED=""
3135for mtpt in /media/floppy /mnt/floppy /floppy ; do
3136    if mount | grep -w $mtpt &> /dev/null ; then
3137        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3138        umount $mtpt
3139    fi
3140done
3141
3142#
3143# If we have a USB device we need to store info
3144# and remove it from the parameters line
3145#
3146if [ "$#" -ne "0" ] ; then
3147    if [ "$1" = "--usb" ] ; then
3148        shift
3149        USBDEVICE=$1
3150        if [ _"$USBDEVICE" = _"" ]; then
3151            Die "No USB device specified"
3152        fi
3153        shift
3154    fi
3155fi
3156
3157if [ "$#" -ne "0" ] ; then
3158    if [ "$1" = "--findkernel" ] ; then
3159        resk=`TryToFindKernelPath`
3160        # Avoids logfile content for mondo
3161        export MONDO_SHARE=""
3162        if [ "$resk" = "" ] ; then
3163            if [ $KERNEL_IS_XEN = "yes" ]; then
3164                echo "$xenkernelpath"
3165                LogFile "INFO: xenkernelpath = $xenkernelpath"
3166                MindiExit 0
3167            else
3168                MindiExit -1
3169            fi
3170        else
3171            echo "$resk"
3172            LogFile "INFO: kernelpath = $resk"
3173            MindiExit 0
3174        fi
3175    elif [ "$1" = "--locatedeps" ] ; then
3176        [ ! "$2" ] && Die "Please specify the binary to look at"
3177        LocateDeps $*
3178        # Avoids logfile content for mondo
3179        export MONDO_SHARE=""
3180        MindiExit $?
3181    elif [ "$1" = "--readalllink" ] ; then
3182        [ ! "$2" ] && Die "Please specify the binary to look at"
3183        # Avoids logfile content for mondo
3184        export MONDO_SHARE=""
3185        ReadAllLink $2
3186        MindiExit $?
3187    elif [ "$1" = "--makemessage" ] ; then
3188        MakeMessageFile | cut -c1-80
3189        MindiExit 0
3190    elif [ "$1" = "--makemountlist" ] ; then
3191        [ ! "$2" ] && Die "Please specify the output file"
3192        MakeMountlist $2
3193        CheckMountlist $2
3194        # Avoids logfile content for mondo
3195        export MONDO_SHARE=""
3196        MindiExit $?
3197    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3198        echo "Mindi v$MINDI_VERSION"
3199        # Avoids logfile content for mondo
3200        export MONDO_SHARE=""
3201        MindiExit 0
3202    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3203        MONDO_TMP=$2
3204        # Change MINDI_TMP for the one provided by mondo
3205        # So that it can get back the built files
3206        if [ _"$MONDO_TMP" = _"" ]; then
3207            Die "MONDO_TMP is empty, aborting"
3208        fi
3209        if [ _"$MONDO_TMP" = _"/" ]; then
3210            Die "MONDO_TMP is /, aborting"
3211        fi
3212        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3213        rmdir $MINDI_TMP
3214        export MINDI_TMP=$MONDO_TMP
3215        mkdir -p $MINDI_TMP
3216
3217        # This is the scratch dir in mondo - subdir images
3218        MINDI_CACHE=$3
3219
3220        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3221        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3222       
3223###
3224### Sq-Modification...
3225### Attempt to locate kernel specific module path
3226### if module path is found then use it other wise use uname -r to set it...
3227###
3228        if [ $KERNEL_IS_XEN = "yes" ]; then
3229            LogAll "INFO: xenkernelpath = $xenkernelpath"
3230        fi
3231        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3232        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3233        then
3234           LogAll "WARNING: Module path for ${kernelpath} not found..."
3235           LogAll "         using running kernel\'s modules."
3236           kernelname=$KERVERRUN
3237        else
3238           LogAll "Using modules for kernel: ${kernelname}"
3239        fi
3240        LogAll "INFO: kernelname = $kernelname"
3241        LogAll "INFO: kernelpath = $kernelpath"
3242###
3243### end of Sq-Modification
3244###
3245        TAPEDEV=$5
3246        TAPESIZE=$6
3247        FILES_IN_FILELIST=$7
3248        USE_LZO=$8
3249        CDRECOVERY=$9
3250        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3251            IMAGE_DEVS=""
3252        else
3253            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3254        fi
3255        if [ "${11}" ] ; then
3256            LILO_OPTIONS=""
3257    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3258        fi
3259        LAST_FILELIST_NUMBER=${12}
3260        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3261        export MINDI_EXCLUDE_DEVS="${14}"
3262        USE_COMP="${15}"
3263        USE_LILO="${16}"
3264        USE_STAR="${17}"
3265        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3266        DIFFERENTIAL="${19}"
3267        USE_GZIP="${20}"
3268        NOT_BOOT="${21}"
3269        [ "$USE_COMP" = "" ] && USE_COMP=yes
3270        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3271        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3272        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3273        # MONDO_ROOT is the real scratchdir
3274        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3275        if [ _"$MONDO_ROOT" != _"" ]; then
3276            mkdir -p $MONDO_ROOT
3277        else
3278            Die "MONDO_ROOT is undefined"
3279        fi
3280    else
3281        LogScreen "Syntax: mindi (--custom ....)"
3282        MindiExit -1
3283    fi
3284fi
3285
3286if [ _"$MINDI_CACHE" != _"" ]; then
3287    rm -rf $MINDI_CACHE/* 2> /dev/null
3288    mkdir -p $MINDI_CACHE
3289fi
3290
3291[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3292
3293if [ _"$MONDO_SHARE" = _"" ]; then
3294    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3295    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3296    LogIt "BusyBox sources are available from http://www.busybox.net"
3297    LogIt "------------------------------------------------------------------------------"
3298else
3299    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3300fi
3301if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3302    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3303else
3304    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3305    MindiExit -1
3306fi
3307
3308for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3309    modinfo $i 2> /dev/null 1> /dev/null
3310    if [ $? -eq 0 ]; then
3311        modprobe $i 2>&1 > /dev/null
3312    fi
3313done
3314
3315KERN_DISK_MADE=""
3316
3317LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3318LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3319LogFile "NOT_BOOT = '$NOT_BOOT'"
3320if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3321    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3322    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3323    MakeMountlist $MINDI_TMP/mountlist.txt
3324    CheckMountlist $MINDI_TMP/mountlist.txt
3325    mkdir -p $MINDI_TMP/small-all/tmp
3326    cd "$MINDI_TMP/small-all"
3327    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3328    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3329    sleep 2
3330    LogIt "Done. Exiting."
3331    MindiExit 0
3332fi
3333
3334if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3335    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3336fi
3337
3338if [ "$kernelpath" = "" ] ; then
3339    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3340    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3341    read ch
3342    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3343        USE_OWN_KERNEL="yes"
3344    else
3345        USE_OWN_KERNEL="no"
3346    fi
3347    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3348        YOUR_KERNEL_SUCKS=""
3349        kernelpath=`TryToFindKernelPath`
3350        if [ "$kernelpath" = "" ] ; then
3351            echo -n "Please enter kernel path : "
3352            read kernelpath
3353        fi
3354    else
3355        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3356    fi
3357fi
3358if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3359    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3360    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3361        source $MINDI_LIB/FindDistroFailsafe
3362        # Log kernel image
3363        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3364        kernelpath="$FAILSAFE_KBIN"
3365        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3366        LogIt "      The failsafe kernel is $kernelpath."
3367        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3368        LogIt "      disks then it may still be a result of a problem with your kernel."
3369        pwd=`pwd`
3370        cd "$MINDI_TMP"
3371        mkdir -p lib/modules
3372        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3373        cd "$pwd"
3374    else
3375        kernelpath=$MINDI_LIB/vmlinuz
3376        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3377        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3378        LogIt "      disks then it may still be a result of a problem with your kernel."
3379        pwd=`pwd`
3380        cd "$MINDI_TMP"
3381        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3382        cd "$pwd"
3383    fi
3384    YOUR_KERNEL_SUCKS="Your kernel sucks"
3385fi
3386echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3387[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3388
3389[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3390
3391PrepareDataDiskImages
3392
3393ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3394rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3395export ramdisk_size=$rds
3396
3397LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3398if [ "$ARCH" = "ia64" ] ; then
3399    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3400else
3401    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3402fi
3403
3404[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3405...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3406
3407if [ _"$MONDO_SHARE" = _"" ]; then
3408    ListImagesForUser
3409    OfferToMakeBootableISO
3410    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3411        OfferToMakeBootableUSB
3412    fi
3413    LogAll "Finished."
3414elif [ "$TAPEDEV" ] ; then
3415    if [ "$ARCH" != "ia64" ] ; then
3416        # We need to keep the img file as boot file for ia64 platform
3417        rm -f $MINDI_CACHE/{*img,*iso}
3418    else
3419        rm -f $MINDI_CACHE/*iso
3420    fi
3421    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3422        OfferToMakeBootableUSB
3423    fi
3424    OfferToMakeBootableISO
3425    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3426        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3427    else
3428        Die "Cannot find all.tar.gz, to be written to tape"
3429    fi
3430elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3431    OfferToMakeBootableUSB
3432else
3433    OfferToMakeBootableISO
3434fi
3435# cleanup
3436LogAll "INFO: $FRIENDLY_OUTSTRING"
3437for mtpt in $FLOPPY_WAS_MOUNTED ; do
3438    mount $mtpt
3439done
3440MindiExit 0
Note: See TracBrowser for help on using the repository browser.