source: branches/3.0/mindi/mindi @ 3181

Last change on this file since 3181 was 3181, checked in by bruno, 6 years ago
  • Improve mindi logging when a new kernel mechanism for initramfs is found
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3181 2013-08-31 06:06:07Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `ReadAllLink $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
379    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
381    if [ ! -e "$KEYDIR" ] ; then
382        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
383        return 0
384    fi
385    if [ -e "/etc/sysconfig/keyboard" ] ; then
386        LogFile "INFO: Red Hat-style config detected."
387        keyfile=/etc/sysconfig/keyboard
388    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
389        LogFile "INFO: Slackware-style config detected."
390        keyfile=/etc/rc.d/rc.keymap
391    elif [ -e "/etc/rc.config" ] ; then
392        LogFile "INFO: Debian-style config detected."
393        keyfile=/etc/rc.config
394    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
395        LogFile "INFO: Debian-style config detected."
396        mkdir -p $bigdir/tmp
397        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
398        KBDEPTH=0
399        mkdir -p $bigdir/etc/console
400        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
401        echo ""
402        echo -e "$DONE"
403        return 0
404    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
405        LogFile "INFO: Ubuntu-style config detected."
406        mkdir -p $bigdir/tmp
407        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
408            kbdfile="/etc/console-setup/boottime.kmap.gz"
409        else
410            kbdfile="/etc/console-setup/cached.kmap.gz"
411        fi
412        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
413        KBDEPTH=0
414        mkdir -p $bigdir/etc/console-setup
415        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
416        echo ""
417        echo -e "$DONE"
418        return 0
419    elif [ -e "/etc/rc.conf" ] ; then
420        LogFile "INFO: ArchLinux config detected."
421        keyfile=/etc/rc.conf
422    elif [ -e "/etc/conf.d/keymaps" ] ; then
423        LogFile "INFO: Gentoo-style config detected."
424        keyfile=/etc/conf.d/keymaps
425    else
426        LogFile "Searching for rc.config ..."
427        keyfile=`find /etc -name rc.config | head -n1`
428        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
429            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
430            return
431        else
432            LogFile "INFO: Found $keyfile"
433        fi
434    fi
435    if [ ! -e "$KEYDIR/keymaps" ] ; then
436        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
437        return
438    fi
439    LogFile "INFO: keyfile=$keyfile"
440    # For SLES we need to remove the .map.gz extension Cf #614
441    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
442    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
443    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
444    LogFile "INFO: locale=$locale"
445    #
446    # Process the keymaps dir once for all
447    # AddKeyboardMappingFile will use it recursively
448    #
449    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
450    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
451    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
452    # If we have multiple keymaps then log it !!
453    echo "$mp" | grep -q " " >> $LOGFILE
454    if [ $? -eq 0 ]; then
455        LogAll "WARNING: Multiple keymaps found: $mp"
456        LogFile "INFO: The following one will be used"
457    fi
458    for i in $mp ; do
459        mappath=$i
460        [ -e "$i" ] && [ ! -d "$i" ] && break
461    done
462    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
463        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
464    fi
465    LogFile "INFO: mappath = $mappath"
466    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
467        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
468        return
469    fi
470    LogAll "INFO: Adding the following keyboard mapping tables: "
471    mkdir -p $bigdir/tmp
472    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
473    KBDEPTH=0
474    AddKeyboardMappingFile $mappath
475    echo ""
476    echo -e "$DONE"
477    rm -f $MINDI_TMP/keymaps.find
478    return 0
479}
480
481
482FindMboot32Binary() {
483    MBOOTC32=/usr/lib/syslinux/mboot.c32
484    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
485    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
486    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
487    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
488    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
489    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
490    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
491    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
492}
493
494FindIsolinuxBinary() {
495    ISOLINUX=/usr/lib/isolinux.bin
496    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
497    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
498    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
499    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
500    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
501    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
502    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
503    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
504}
505
506
507FindSpecificModuleInPath() {
508    local modpaths pwd line
509    pwd=`pwd`
510    if [ "$YOUR_KERNEL_SUCKS" ] ; then
511        cd "$MINDI_TMP"
512    else
513        cd /
514    fi
515    if [ ! -e "$1" ] ; then
516        LogAll "WARNING: cannot search specific path '$1'"
517        return 1
518    fi
519    # Find all files and links (required for some VMWare VMs)
520    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
521    echo "$modpaths"
522    cd "$pwd"
523}
524
525
526GenerateGiantDependencyList() {
527    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
528
529    echo -en "Analyzing dependency requirements"
530    outfile=$1
531    tempfile=$MINDI_TMP/$$.txt
532    incoming=`ReadLine`
533
534    > $tempfile
535    progress=0
536    res=0
537    noof_lines=$2
538    while [ "$incoming" != "" ] ; do
539        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
540            incoming=`ReadLine`
541            continue
542        fi
543        if [ "$incoming" = "LVMFILES:" ] ; then
544            break
545        fi
546        filelist=`GenerateListForFile "$incoming"`
547        r=$?
548        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
549        res=$(($res+$r))
550#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
551        for fname in $filelist ; do
552            [ "$fname" != "" ] && echo "$fname" >> $tempfile
553        done
554        progress=$(($progress+1))
555        LogProgress $progress $noof_lines
556        incoming=`ReadLine`
557    done
558    if  [ "$incoming" = "LVMFILES:" ] ; then
559        incoming=`ReadLine`
560        lvmversion=""
561        while [ "$incoming" != "" ] ; do
562            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
563                incoming=`ReadLine`
564                continue
565            fi
566            filelist=`GenerateListForFile "$incoming"`
567            for tool in $filelist ; do
568                lvmresolved=`readlink -f $tool`
569                if [ "$tool" = "$lvmresolved" ]; then
570                    echo "$tool" >> $tempfile
571                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
572                    if [ "$lvmversion" = "" ] ; then
573                        lvmversion=`$lvmresolved`
574                        echo "$lvmresolved" >> $tempfile
575                    fi
576                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
577                    if [ "$lvmversion" = "200" ]; then
578                        # pvdata and lvmcreate_initrd don't exist in LVM2
579                        case "$toolstripped" in
580                        "pvdata")
581                            continue
582                            ;;
583                        "lvmcreate_initrd")
584                            continue
585                            ;;
586                        esac
587                    fi
588                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
589                    if [ -e "$toolpath" ] ; then
590                        echo "$toolpath" >> $tempfile
591                        echo "$tool" >> $tempfile
592                    else
593                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
594                    fi
595                    if [ -e "$toolpath" ] ; then
596                        echo "$toolpath" >> $tempfile
597                        echo "$tool" >> $tempfile
598                    else
599                        echo "Where are your LVM-Tools? Couldn't find $tool"
600                    fi
601                else
602                    echo "$tool" >> $tempfile
603                fi
604            done
605            progress=$(($progress+1))
606            LogProgress $progress $noof_lines
607            incoming=`ReadLine`
608        done
609    fi
610    echo -en "$DONE\nMaking complete dependency list"
611
612    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
613    mv -f $tempfile.new $tempfile
614    > $outfile.pre
615    progress=0
616    noof_lines=`cat $tempfile | wc -l`
617    LogFile "---------------------------------"
618    LogFile "List of dependencies:             "
619    LogFile "---------------------------------"
620    for fname in `cat $tempfile` ; do
621        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
622        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
623        progress=$(($progress+1))
624        LogProgress $progress $noof_lines
625    done
626    if [ _"$MONDO_SHARE" != _"" ]; then
627        mkdir -p $bigdir/tmp
628        mkdir -p $bigdir/usr/bin
629        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
630            LogAll "\nINFO: Incorporating post-nuke tarball"
631            old_pwd=`pwd`
632            cd "$bigdir"
633            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
634            cd "$old_pwd"
635        fi
636        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
637            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
638        else
639            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
640            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
641            LogIt "       If Mindi was called by Mondo then send me a bug report."
642            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
643            LogIt "       Finally, run Mindi again."
644            Die "Odd."
645        fi
646        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
647        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
648            LogAll "\nINFO: Incorporating Network-related settings"
649            for r in NETFS-* ISO-PREFIX ; do
650                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
651                LogFile "INFO: Copying $r to ramdisk"
652            done
653        fi
654    fi
655    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
656    rm -f $tempfile $outfile.pre
657    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
658    return $res
659}
660
661
662GenerateListForFile() {
663    local files_found loc fname incoming i res
664    incoming="$1"
665    files_found=""
666    res=0
667
668    for fname in $incoming ; do
669        files_found="$files_found `LocateFile $fname`"
670    done
671
672    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
673}
674
675
676# Returns all disk devices which are part of a raid array
677GetAllRaidMembers() {
678    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
679}
680
681
682GetFileSizeList() {
683    local i
684    for i in `find $1 -type d -o -print` ; do
685        du -sk $i
686    done
687}
688
689
690# Check kernel filesystem capabilites for accessing initrd image
691# Could be ext2 FS (old mode) or initramfs (new mode)
692#
693# Interface definition:
694# param #1: absolute path to kernel image
695GetInitrdFilesystemToUse() {
696
697    # interface test: make sure we have one parameter
698    if [ $# -ne 1 ]; then
699        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
700    fi
701
702    # interface parameters
703    local lvKernelImage=$1
704
705    # local constants (filesystem magic strings)
706    local lcMagicCramfs="<3>cramfs: wrong magic"
707    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
708    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
709    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
710
711    # local variables
712    local lvOffset
713    local lvScanRes
714    local lvUseFilesystem
715
716    # say where we are.
717    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
718
719    # verify that file exists
720    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
721
722    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
723    file $lvKernelImage 2>&1 | grep -q gzip
724    if [ $? -eq 0 ]; then
725        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
726        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
727    else
728        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
729        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
730        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
731        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
732        if [ $lvOffset -eq 0 ]; then
733            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
734            lvScanRes=$lcMagicInitfs
735        else
736            lvOffset=`expr $lvOffset / 2`
737            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
738            # scan again  kernel image
739            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
740        fi
741    fi
742
743    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
744    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
745        lvUseFilesystem="ext2fs"
746    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
747        lvUseFilesystem="ext3fs"
748    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
749        lvUseFilesystem="initramfs"
750    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
751        lvUseFilesystem="cramfs"
752    else
753        # In that case, we are most probably after 2.6.30 and use the supported initramfs
754        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
755        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
756        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
757        lvUseFilesystem="initramfs"
758    fi
759
760    # say what we are using
761    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
762
763    # return file system to use
764    echo "$lvUseFilesystem"
765
766}
767
768# Searches members of raid device
769# $1: raid device (/dev/md...)
770GetRaidDevMembers() {
771    if [ ! -f /etc/raidtab ]; then 
772        return
773    fi
774    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
775}
776
777
778HackPathsToFailsafe() {
779    local incoming newpath stub i pwd
780    incoming=`ReadLine`
781    pwd=`pwd`
782    cd "$MINDI_TMP"
783    while [ "$incoming" != "" ] ; do
784        stub=`basename $incoming`
785        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
786        for i in $newpath ; do
787            echo "$i"
788        done
789        read incoming
790    done
791    cd "$pwd"
792}
793
794
795ListAllPartitions() {
796    local res currline partition all_partitions ap_orig remaining i j
797
798    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
799    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
800    if [ -e "/vmfs/volumes" ]; then
801        # For VMWare ESX 3 get the device names of these volumes
802        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
803    fi
804    return
805}
806
807
808ListImagesForUser() {
809    local path fname
810    path=$MINDI_CACHE
811    echo -en "In the directory '$path' you will find the images:-\n"
812    for fname in `ls $path | grep -F mindi-` ; do
813        printf "%19s " $fname
814    done
815    echo " "
816}
817
818
819ListKernelModulePaths() {
820    local module_list module fname r kern
821    module_list="$MODULES"
822    # Remove unwanted modules from list
823    for i in $DENY_MODS; do
824        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
825        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
826    done
827###
828### Sq-Modification ... Use kernelname for module search path if specified
829###
830    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
831    then
832        kern=${kernelname}
833    else
834        kern="$KERVERRUN"
835    fi
836    export KERVER=$kern
837###
838### Sq-Mod End
839###
840    # Get rid of duplicates, so that if a live kernel module also appears
841    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
842    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
843        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
844        if [ -z "$r" ]; then
845            if [ "`echo "$MODULES" | grep -w $module`" ]; then
846                r="[live module file not found]"
847            else
848                r="[extra module file not found]"
849            fi
850        else
851            [ -f "$r" ] && echo "$r"
852        fi
853        LogFile "INFO: module $module --> $r"
854    done
855    find /lib/modules/$kern/modules.* -type f 2> /dev/null
856}
857
858#
859# Critical function which computes all dependencies (dyn. lib.)
860# for a list of binaries
861#
862LocateDeps() {
863    local incoming fname deps
864    incoming="$*"
865    for fname in $incoming ; do
866        if [ ! -e "$fname" ] ; then
867            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
868            if echo $fname | grep lvm &> /dev/null ; then
869                LogFile "          This warning only affects you if you are using LVM."
870                if echo "$MODULES" | grep lvm &> /dev/null ; then
871                    LogFile "          I think you are, so please take heed!"
872                else
873                    LogFile "          I don't think you are, so don't worry about it."
874                fi
875            fi
876        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
877            newf=`readlink -f $fname`
878            LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
879            ldd $newf 2> /dev/null | ProcessLDD
880        else
881            ldd $fname 2> /dev/null | ProcessLDD
882        fi
883    done
884}
885
886
887# Give all symlinks recursively of a full path name
888ReadAllLink() {
889    file="$1"
890
891    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
892        # We need to normalise the path with .. in it
893        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
894    done
895    echo "$file"
896    if [ ! -h $file ]; then
897        return 0
898    fi
899
900    link=`readlink $file`
901    d=`dirname $file`
902    # Is link a relative or full path name
903    fchar=`echo $link | cut -c1`
904    # If mother dir is a link print it
905    if [ -h "$d" ]; then
906        echo "$d"
907        d2=`readlink $d`
908        c2=`echo $d2 | cut -c1`
909        if [ "$c2" != "/" ]; then
910            if [ "$c2" != "." ]; then
911                d="/$d2"
912            else
913                d="$d/$d2"
914            fi
915        fi
916    fi
917    if [ "$fchar" != "/" ]; then
918        # Relative or local link
919        ReadAllLink "$d/$link" 
920    else
921        # Absolute path
922        ReadAllLink $link 
923    fi
924}
925
926
927LocateFile() {
928    local i path fname_to_find location output resolved tmp stub cache_id loclist
929    fname_to_find="$1"
930    # It's an absolute path
931    if echo "$fname_to_find" | grep -x "/.*" ; then
932        output="$fname_to_find"
933        if [ -h "$output" ] ; then
934            output="`ReadAllLink $output` $output"
935        fi
936        echo "$output"
937        return 0
938    fi
939    # It's not an absolute path
940    output=""
941    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
942    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
943        [ -h "$path" ] && continue
944        [ ! -e "$path/$fname_to_find" ] && continue
945        output="$path/$fname_to_find $output"
946        if [ -h "$path/$fname_to_find" ] ; then
947            output="`ReadAllLink $path/$fname_to_find` $output"
948        fi
949    done
950    if [ "$output" = "" ] ; then
951        return 1
952    fi
953    echo "$output"
954    return 0
955}
956
957LogProgress() {
958    local i progress modres noof_lines
959 
960    progress=$1
961    noof_lines=$2
962
963    echo -en "\r\t\t\t\t\t\t\t\t"
964    i=$(($progress*100))
965    if [ $noof_lines -ne 0 ]; then
966        i=$(($i/$noof_lines))
967    else
968        i=0
969    fi
970    echo -en "$i"
971    echo -en "%"
972    modres=$(($progress%4))
973    [ "$modres" -eq "0" ] && echo -en "\t/"
974    [ "$modres" -eq "1" ] && echo -en "\t-"
975    [ "$modres" -eq "2" ] && echo -en "\t\\"
976    [ "$modres" -eq "3" ] && echo -en "\t|"
977}
978
979# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
980MakeMondoConfigFile() {
981    local outfile use_lzo use_comp use_star
982    outfile=$1
983    > $outfile
984    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
985    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
986    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
987    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
988    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
989    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
990    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
991    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
992    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
993    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
994    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
995    echo "use-lzo $use_lzo" >> $outfile
996    echo "use-gzip $use_gzip" >> $outfile
997    echo "use-star $use_star" >> $outfile
998    echo "use-lzma $use_lzma" >> $outfile
999    echo "use-comp $use_comp" >> $outfile
1000    echo "datestamp `date`" >> $outfile
1001    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1027}
1028
1029# Get PV's for an LV
1030GetPVsForLV() {
1031  if [ -n "$1" ]; then
1032    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1033    if [ -z "$vg" ]; then
1034      return
1035    fi
1036    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1037  fi
1038}
1039
1040
1041MakeMountlist() {
1042    local mountlist all_partitions current_partition \
1043partition_size partition_format outstring partition_number \
1044partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1045absolute_partition old_partition_fmt current_lvolume uname skip
1046
1047    LogFile "------------------------------------"
1048    LogFile "Your raw fstab file looks like this:"
1049    LogFile "------------------------------------"
1050    cat $MY_FSTAB >> $LOGFILE
1051    LogAll "-----------------------------------"
1052    LogAll "Your mountlist will look like this:"
1053    LogAll "-----------------------------------"
1054
1055# mountlist(OUT)
1056    mountlist=$1
1057
1058# NB: partition = device
1059# NB: mountpt = where the device is mounted
1060
1061    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1062
1063    [ "$mountlist" != "" ] && rm -Rf $mountlist
1064    > $mountlist
1065    all_partitions=""
1066   
1067    if [ $LVM != "false" ]; then
1068        LogAll "INFO: Analyzing LVM..."
1069        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1070        if [ $? -ne 0 ]; then
1071            LVM="false"
1072        fi
1073        # Excluded LVs and GVs are not reported here
1074        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1075    fi
1076    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1077    for i in $IMAGE_DEVS ; do
1078        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1079    done
1080    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1081    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1082    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1083    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1084    for c_p in $all_partitions ; do
1085        # Skip fd/cd devices, network FS, cifs
1086        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1087        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1088        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1089            current_partition=`readlink -f $c_p`
1090            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1091                current_partition="$c_p"
1092            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1093                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1094                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1095            fi
1096            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1097        else
1098            current_partition="$c_p"
1099        fi
1100        [ "$c_p" = "none" ] && continue
1101        redhat_label=""
1102        label=""
1103        uuid=""
1104        absolute_partition=`readlink -f $c_p`
1105        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1106
1107        # set default in case we dont't find it
1108        str_to_find_fmt_with=$current_partition
1109
1110        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1111        # current_partition contains only first column of /etc/fstab
1112        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1113            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1114            actual_dev=""
1115
1116            # 1st try, findfs - the RHEL way of finding labels and their partitions
1117            if [ -x "/sbin/findfs" ]; then
1118                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1119            fi
1120   
1121            # 2nd try : blkid, the good way for all LABEL except swap
1122            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1123                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1124                # For LVM FS it will give a /dev/dm-# which should then be converted
1125                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1126                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1127                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1128                    for dev in `ls /dev/mapper/*`; do
1129                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1130                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1131                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1132                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1133                            break
1134                        fi
1135                    done
1136                fi
1137            fi
1138   
1139            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1140            # For LVM gives a /dev/mapper entry
1141            if [ "x$actual_dev" = "x" ]; then
1142                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1143            fi
1144   
1145            # 4th try, with vol_id
1146            # SWAP only
1147            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1148                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1149                for dev_swap in $list_swaps ; do
1150                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1151                    if [ "x$dev_exists" != "x" ]; then
1152                        actual_dev=$dev_swap
1153                        break;
1154                    fi
1155                done
1156            fi
1157
1158            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1159            # LABEL=SW-cciss/c0d0p3 (RDP)
1160            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1161            # SWAP only
1162            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1163                    skip=""
1164                    uname=$KERVERRUN
1165                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1166                    # 2.6.12 needs 16 (FC3)
1167                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1168                    # 2.6.19 and upper needs 1052
1169                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1170                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1171                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1172                    if [ $skip = "" ]; then
1173                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1174                    fi
1175                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1176                    do
1177                        # Location of the swap label for kernel 2.6
1178                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1179                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1180                            actual_dev=$try_dev
1181                        fi
1182                    done
1183            fi
1184
1185            # Check if one of all those tries has known success
1186            if [ "x$actual_dev" != "x" ]; then
1187                current_partition=$actual_dev
1188            else
1189                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1190            fi
1191        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1192        # current_partition contains only first column of /etc/fstab
1193        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1194            uuid=`echo "$current_partition" | cut -d'=' -f2`
1195            actual_dev=""
1196
1197            # 1st try, findfs - the RHEL way of finding labels and their partitions
1198            if [ -x "/sbin/findfs" ]; then
1199                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1200            fi
1201   
1202            # 2nd try : blkid, the good way for all UUID except swap
1203            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1204                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1205                # For LVM FS it will give a /dev/dm-# which should then be converted
1206                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1207                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1208                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1209                    for dev in `ls /dev/mapper/*`; do
1210                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1211                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1212                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1213                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1214                            break
1215                        fi
1216                    done
1217                fi
1218            fi
1219   
1220            # 3th try, with vol_id
1221            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1222                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1223                for dev in $list_dev ; do
1224                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1225                    if [ "x$dev_exists" != "x" ]; then
1226                        actual_dev=$dev
1227                        break;
1228                    fi
1229                done
1230            fi
1231
1232            # 4th try, with dumpuuid (VMWare only ?) for swap
1233            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1234                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1235                for dev in $list_dev ; do
1236                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1237                    if [ "x$dev_exists" != "x" ]; then
1238                        actual_dev=$dev
1239                        break;
1240                    fi
1241                done
1242            fi
1243
1244            # Check if one of all those tries has known success
1245            if [ "x$actual_dev" != "x" ]; then
1246                current_partition=$actual_dev
1247            else
1248                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1249            fi
1250        else
1251            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1252            # they use symlinks in fstab unrelated to what is shown in mount !
1253            if [ _"$partition_mountpt" = _"" ]; then
1254                # set default in case we dont't find it
1255                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1256                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1257                            str_to_find_fmt_with=$tmpp
1258                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1259                            break;
1260                        fi
1261                done
1262            fi
1263        fi
1264
1265        # Detects noauto partitions not mounted and exclude them
1266        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1267        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1268                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1269            continue
1270        fi
1271        # Detects bind partitions and exclude them
1272        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1273                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1274            continue
1275        fi
1276
1277        # Look for devices which have to be excluded
1278        skip=0
1279        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1280            l=""
1281            list_of_devices="`ReadAllLink $current_partition`"
1282            for d in $list_of_devices; do
1283                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1284            done
1285
1286            # Remove PVs from LVs excluded
1287            l="$l `GetPVsForLV $current_partition`"
1288
1289            # We want a single unique list
1290            list_of_devices="`echo $l | sort -u`"
1291
1292            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1293                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1294                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1295                    skip=1
1296                    continue
1297                fi
1298            done
1299        fi
1300        if [ $skip -eq 1 ]; then
1301            continue
1302        fi
1303
1304        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1305        # Detects iso9660 ISO images and exclude them
1306        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1307                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1308            continue
1309        fi
1310        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1311        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1312        # the former is then a link to the latter, so we test whether
1313        # $current_partition is actually such a link or not and set
1314        # $current_lvolume accordingly. On Debian you may find more than one answer
1315        # so we remove the one corresponding to /dev/.static
1316        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1317        # principle is the same and we need to find the link to it as well.
1318        # Note that $current_lvolume may well be an
1319        # ordinary device. It is just to make sure that we feed the right value
1320        # into any of the LVM tools if possible.
1321
1322        current_lvolume="$current_partition"
1323        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1324            # .static dir are a Debian specificity
1325            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1326            echo $current_lvolume | grep -q ' '
1327            if [ $? -eq 0 ]; then
1328                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1329            fi
1330            # if it's not found, it may well be a real device such as a multipath one
1331            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1332            if [ _"$current_lvolume" = _"" ]; then
1333                current_lvolume="$current_partition"
1334            fi
1335        fi
1336        #
1337        # End of LVM device style variation code (other than $current_lvolume).
1338
1339        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1340            # Size computed via LVM not directly
1341            partition_size="lvm"
1342        else
1343            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1344            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1345            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1346                # Skip swap files
1347                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1348                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1349                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1350                [ "$partition_format" != "swap" ] && partition_format="swap"
1351                if [ "$partition_size" = "" ] ; then
1352                    totalsize=0
1353                    items=0
1354                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1355                        totalsize=$(($totalsize+$i))
1356                        items=$(($items+1))
1357                    done
1358                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1359                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1360                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1361                fi
1362            else
1363                partition_size=`SizeOfPartition $current_partition`
1364            fi
1365        fi
1366        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1367        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1368        if [ "$partition_mountpt" = "" ] ; then
1369            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1370                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1371                    partition_mountpt="raid"
1372                    partition_format="raid"
1373                else
1374                    partition_mountpt="lvm"
1375                    partition_format="lvm"
1376                fi
1377            fi
1378        fi
1379        psz=$partition_size
1380        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1381        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1382        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1383            partition_mountpt="image"
1384            old_partition_fmt=$partition_format
1385            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1386            partition_size=$(($partition_size+1)); # just in case
1387            if [ "$partition_format" = "Linux" ] ; then
1388                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1389                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1390                partition_format=$old_partition_fmt
1391            fi
1392        fi
1393
1394        if [ ! "$partition_mountpt" ] ; then
1395            LogFile "------- $FDISK -l $qq log ------------"
1396            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1397                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1398                [ "$partition_format" ] && break
1399            done
1400            LogFile "------- $FDISK log end ------------"
1401            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1402                partition_format="compaq"
1403            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1404                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1405                continue
1406            fi
1407        fi
1408        if [ "$redhat_label" ]; then
1409            label="$redhat_label"
1410        elif [ "$uuid" ]; then
1411            label="$uuid"
1412        fi
1413        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1414        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1415        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1416        if [ "$current_partition" = "" ] ; then
1417            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1418        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1419            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1420                partition_mountpt=raid
1421                partition_format=raid
1422                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1423                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1424            else
1425                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1426            fi
1427        elif [ "$partition_format" = "" ] ; then
1428            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1429        elif [ "$partition_size" = "" ] ; then
1430            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1431        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1432            continue
1433        else
1434            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1435                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1436                partition_format="vfat"
1437            fi
1438            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1439            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1440        fi
1441    done
1442    LogAll "-----------------------------------" 
1443}
1444
1445CheckMountlist() {
1446    local file=$1
1447    # Coherency verification
1448    ML01=`cat $file | wc -l`
1449    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1450    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1451    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1452    if [ "$ML01" -ne "$ML1" ]; then
1453        LogFile "--------------------------------------------"
1454        LogAll "WARNING: Duplicate device entry in mountlist"
1455        LogFile "--------------------------------------------"
1456    fi
1457    if [ "$ML02" -ne "$ML2" ]; then
1458        LogFile "--------------------------------------------"
1459        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1460        LogFile "------------------------------------------------"
1461    fi
1462}
1463
1464OfferToMakeBootableISO() {
1465    local i old_pwd
1466    if [ -z "$ISO_CMD" ]; then
1467        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1468        return
1469    fi
1470    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1471        echo -en "Shall I make a bootable CD image? (y/[n]) "
1472        read i
1473        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1474    fi
1475    rm -Rf $MINDI_TMP/iso
1476    mkdir -p $MINDI_TMP/iso/{images,archives}
1477    LogFile "INFO: mindi_lib = $MINDI_LIB"
1478    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1479    for i in memdisk memtest.bin memtest.img ; do
1480        j=$MINDI_LIB/$i
1481        k=$MINDI_TMP/iso
1482        if [ -e "$j" ] ; then
1483            LogAll "INFO: Copying $j to $k"
1484            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1485            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1486            if [ _"$MONDO_SHARE" != _"" ]; then 
1487                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1488            fi
1489        fi
1490    done
1491    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1492    if [ $KERNEL_IS_XEN = "yes" ]; then
1493        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1494        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1495    fi
1496    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1497    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1498
1499    if [ _"$MONDO_SHARE" != _"" ]; then 
1500        if [ $KERNEL_IS_XEN = "yes" ]; then
1501            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1502            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1503        fi
1504        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1505        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1506    fi
1507    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1508    if [ "$ARCH" != "ia64" ] ; then
1509        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1510    fi
1511    old_pwd=`pwd`
1512    cd "$MINDI_TMP/iso"
1513    if [ "$ARCH" != "ia64" ] ; then
1514        if [ _"$MONDO_SHARE" != _"" ]; then 
1515            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1516            if [ $KERNEL_IS_XEN = "yes" ]; then
1517                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1518            fi
1519            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1520        fi
1521        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1522    else
1523        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1524    fi
1525    if [ "$?" -ne "0" ] ; then
1526        LogFile "----------- $ISO_CMD's errors --------------"
1527        LogAll "$ISO_CMD returned the following errors:"
1528        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1529        LogAll "ERROR: Failed to create ISO image."
1530    else
1531        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1532    fi
1533    rm -f $MINDI_TMP/mkisofs.log
1534    cd "$old_pwd"
1535}
1536
1537
1538OfferToMakeBootableUSB() {
1539    local i
1540    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1541        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1542        read i
1543        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1544        if [ "$USBDEVICE" = "" ]; then
1545            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1546            read dev
1547            USBDEVICE=$dev
1548        fi
1549        echo "WARNING: This will erase all content on $USBDEVICE"
1550        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1551        read i
1552        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1553    fi
1554    rm -Rf $MINDI_TMP/usb
1555    mkdir -p $MINDI_TMP/usb
1556    USBPART="${USBDEVICE}1"
1557
1558    echo -en "Transforming $USBDEVICE in a Bootable device " 
1559    echo -en "."
1560    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1561    LogFile "INFO: Checking $USBDEVICE"
1562    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1563    if [ $? -ne 0 ]; then
1564        LogAll "ERROR: Unable to access $USBDEVICE"
1565        LogAll "       Make sure your USB device is plugged in"
1566        MindiExit -1
1567    fi
1568    echo -en "."
1569    # Some distro do auto mount at that point (Ubuntu)
1570    LogFile "INFO: Unmounting $USBPART just in case"
1571    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1572    # If your key has no MBR it may cause an issue
1573    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1574    if [ -r $MBRFILE ]; then
1575        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1576        dd if=$MBRFILE of=$USBDEVICE
1577    else
1578        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1579        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1580    fi
1581    LogFile "INFO: Preparing $USBDEVICE"
1582    cat > $MINDI_TMP/fdisk.txt << EOF
1583d
1584d
1585d
1586d
1587n
1588p
15891
1590
1591
1592t
1593b
1594a
15951
1596w
1597EOF
1598    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1599    if [ $? -ne 0 ]; then
1600        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1601        LogAll "       Make sure your USB device is plugged in"
1602        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1603        MindiExit -1
1604    fi
1605    LogFile "fdisk build file"
1606    LogFile "----------------"
1607    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1608    LogFile "----------------"
1609    rm -f $MINDI_TMP/fdisk.txt
1610    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1611    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1612    echo -en "."
1613    # Calling kpartx in case devices were not created
1614    if [ -x "/sbin/kpartx" ]; then
1615        /sbin/kpartx -a $USBDEVICE
1616    fi
1617    # Some distro do auto mount at that point (Ubuntu)
1618    LogFile "INFO: Unmounting $USBPART just in case again"
1619    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1620    echo -en "."
1621    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1622    if [ "`which dmsetup`" != "" ]; then
1623        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1624        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1625            LogFile "INFO: Removing $block_id from device mapper."
1626            sleep 1
1627            dmsetup remove $block_id
1628        fi
1629    fi
1630    echo -en "."
1631    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1632    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1633    if [ $? -ne 0 ]; then
1634        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1635        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1636        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1637        MindiExit -1
1638    fi
1639    echo -en "."
1640    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1641    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1642    if [ $? -ne 0 ]; then
1643        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1644        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1645        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1646        MindiExit -1
1647    fi
1648    echo -en "."
1649    mkdir -p $MINDI_TMP/usb/images
1650    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1651    echo -en "."
1652    LogFile "INFO: mindi_lib = $MINDI_LIB"
1653    for i in memdisk memtest.bin memtest.img ; do
1654        j=$MINDI_LIB/$i
1655        k=$MINDI_TMP/usb
1656        if [ -e "$j" ] ; then
1657            LogIt "INFO: Copying $j to $k"
1658            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1659            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1660        fi
1661    done
1662    echo -en "."
1663    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1664    echo -en "."
1665    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1666    echo -en "."
1667    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1668    echo -en "."
1669    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1670    echo -en "."
1671    LogAll "----------- syslinux's conf --------------"
1672    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1673    LogAll "------------------------------------------"
1674    umount $MINDI_TMP/usb
1675    if [ "$ARCH" != "ia64" ] ; then
1676        syslinux -v 2>&1 | grep -q 4.02
1677        if [ $? -eq 0 ]; then
1678            # This buggy version of syslinux requires a call to --stupid and not -s
1679            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1680            res=$?
1681        else
1682            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1683            res=$?
1684        fi
1685        if [ $res -ne 0 ] ; then
1686            LogAll "----------- syslinux's errors --------------"
1687            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1688            LogAll "------------------------------------------"
1689            LogIt "ERROR: Failed to create USB image."
1690        else
1691            echo -e "$DONE"
1692            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1693        fi
1694        rm -f $MINDI_TMP/syslinux.log
1695    else
1696        LogAll "ERROR: No USB boot support for ia64"
1697        MindiExit -1
1698    fi
1699}
1700
1701
1702MakeMessageFile() {
1703   
1704    if [ -x "/bin/lsb_release" ]; then
1705        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1706    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1707        DESC="Arch Linux"
1708        if [ -r /var/log/pacman.log ]; then
1709            # there are no releases but we can get the last system upgrade
1710            # Output example:   Arch Linux [2011-03-03 01:39]
1711            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1712        fi
1713    elif [ -r /etc/issue.net ]; then
1714        DESC=`head -1 /etc/issue.net`
1715    elif [ -r /etc/issue ]; then
1716        DESC=`head -1 /etc/issue`
1717    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1718        # For pb >= 0.9.8
1719        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1720    else
1721        DESC="Unknown desc"
1722    fi
1723    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1724    if [ _"$MONDO_SHARE" != _"" ]; then
1725        if [ "$CDRECOVERY" != "yes" ] ; then
1726            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1727                echo -en "Press <enter> to continue.\n"
1728            elif [ ! "$MINDI_TMP" ] ; then
1729                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1730                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1731                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1732                fi
1733            else
1734                echo -en "$BOOT_MEDIA_MESSAGE"
1735            fi
1736        else
1737            echo -en "\
1738To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1739CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1740        fi
1741    fi
1742
1743    # Also create the other help screens
1744    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1745    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1746    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1747}
1748
1749
1750MakeBootConfFile() {
1751    local options i ooo
1752    options=""
1753    # Type of boot file (elilo or syslinux/isolinux)
1754    type=$1
1755    if [ "$type" = "elilo" ]; then
1756        sep="="
1757    else
1758        sep=" "
1759    fi
1760
1761    # Generic header for conf file
1762    if [ "$type" != "elilo" ] ; then
1763        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1764    else
1765        echo -en "prompt\n"
1766    fi
1767
1768    # Compute which default option to boot from
1769    if [ "$CDRECOVERY" = "yes" ] ; then
1770        echo -en "default${sep}RESTORE\n"
1771    # In case it's mondoarchive
1772    elif [ _"$MONDO_SHARE" != _"" ]; then
1773        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1774            echo -en "default${sep}iso\n"
1775        else
1776            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1777        fi
1778    else
1779        echo -en "default${sep}expert\n"
1780    fi
1781
1782    # Handle timeout
1783    if [ "$CDRECOVERY" != "yes" ] ; then
1784        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1785    else
1786        echo -en "timeout${sep}10000\n"
1787    fi
1788    echo -en "\n"
1789
1790    # prepare which labels will be generated
1791    if [ "$CDRECOVERY" = "yes" ] ; then
1792        options="RESTORE expert"
1793    else
1794        if [ _"$MONDO_SHARE" != _"" ]; then
1795            options="interactive expert compare iso nuke isonuke"
1796        else
1797            options="expert"
1798        fi
1799    fi
1800
1801    # Generate rest of conf file
1802    for i in $options ; do
1803        ooo=$i
1804        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1805        if [ "$type" = "elilo" ]; then
1806            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1807        else
1808            ps="/"
1809            if [ "$type" = "syslinux" ]; then
1810                ps=""
1811            fi
1812            if [ $KERNEL_IS_XEN = "no" ]; then
1813                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1814            else
1815                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1816            fi
1817        fi
1818        echo -en "$outstr"
1819    done
1820    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1821        if [ "$type" = "elilo" ]; then
1822            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1823            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1824        else
1825            ps="/"
1826            if [ "$type" = "syslinux" ]; then
1827                ps=""
1828            fi
1829            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1830            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1831        fi
1832    fi
1833}
1834
1835
1836PrepareBootDiskImage_LILO() {
1837    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1838    imagesdir=$MINDI_CACHE
1839    kernelpath=$1
1840
1841    retval=0
1842
1843    old_pwd=`pwd`
1844    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1845    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1846    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1847    echo -en "..."
1848    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1849    mountpoint=$MINDI_TMP/mountpoint.$$
1850    mkdir -p $mountpoint
1851    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1852    LogFile "Creating vfat filesystem on $imagefile" 
1853    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1854    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1855
1856    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1857    mkdir -p $mountpoint/etc
1858    liloconf=$mountpoint/elilo.conf
1859
1860    MakeBootConfFile elilo > $liloconf
1861
1862    # Copy it so that CD-ROM menu entry is satisfied
1863    mountefi=0
1864    df -T | grep /boot/efi | grep -q vfat
1865    if [ $? -ne 0 ]; then
1866        mount /boot/efi
1867        if [ $? -ne 0 ]; then
1868            echo "You have to mount your EFI partition when using mindi"
1869            MindiExit -1
1870        fi
1871        mountefi=1
1872    fi
1873    el=`find /boot/efi -name elilo.efi`
1874    cp $el $mountpoint
1875    cp $liloconf $mountpoint
1876    if [ $mountefi -eq 1 ]; then
1877        umount /boot/efi 2>&1 > /dev/null
1878    fi
1879
1880    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1881    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1882    if [ "$?" -ne "0" ] ; then
1883        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1884        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1885        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1886        rm -f $MINDI_TMP/mtpt.$$
1887        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1888        retval=$(($retval+1))
1889    fi
1890    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1891
1892    mkdir -p $mountpoint/tmp
1893    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1894        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1895    fi
1896
1897    # copy the kernel across
1898    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1899    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1900    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1901    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1902    if [ "$?" -ne "0" ] ; then
1903        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1904        du -sk $mountpoint/* >> $LOGFILE
1905        LogFile "--- end of list of files ---"
1906        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1907        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1908        cd "$old_pwd"
1909        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1910        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1911    #   losetup /dev/loop0 -d
1912        [ "$imagefile" != "" ] && rm -f $imagefile
1913        LogIt "ERROR: Sorry, your kernel is too big for your image"
1914        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1915        return 0
1916    fi
1917    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1918    LogFile "INFO: Free space left on image = $free_space KB"
1919    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1920    # make it bootable
1921    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1922    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1923    if [ "$KERN_DISK_MADE" ] ; then
1924        LogFile "INFO: Not running LILO. It's not that kind of disk."
1925    fi
1926
1927    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1928    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1929    echo -en "..."
1930    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1931    if [ "$retval" -eq "0" ] ; then
1932        echo -en "...$DONE\n"
1933        if [ "$KERN_DISK_MADE" ] ; then
1934            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1935        fi
1936    else
1937        echo -en "...failed\n"
1938        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1939        [ "$imagefile" != "" ] && rm -f $imagefile
1940    fi
1941    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1942    return $retval
1943}
1944
1945
1946PrepareBootDiskImage_ISOLINUX() {
1947    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1948    imagesdir=$MINDI_CACHE
1949    kernelpath=$1
1950    do_boot_root_thingy=""
1951    retval=0
1952
1953    old_pwd=`pwd`
1954    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1955    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1956    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1957    echo -en "..."
1958    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1959    mountpoint=$MINDI_TMP/mountpoint.$$
1960    mkdir -p $mountpoint
1961    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1962    LogFile "INFO: Creating vfat filesystem on $imagefile"
1963    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1964    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1965    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1966
1967    # Only move it now to its final destination and use it now
1968    mv $imagefile $imagesdir
1969    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1970
1971    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1972
1973    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1974    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1975    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1976    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1977    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1978    if [ "$?" -ne "0" ] ; then
1979        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1980        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1981        LogAll "       Please unload some of your modules and try again."
1982        rm -f $MINDI_TMP/mtpt.$$
1983        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1984        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1985        retval=$(($retval+1))
1986    fi
1987
1988    mkdir -p $mountpoint/tmp
1989    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1990        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1991    fi
1992
1993    # copy the kernel across
1994    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1995    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1996    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1997         
1998    retval=0
1999    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2000    retval=$?
2001    if [ $KERNEL_IS_XEN = "yes" ]; then
2002        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2003        let retval+=$?
2004    fi
2005 
2006    if [ "$retval" -ne "0" ] ; then
2007        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2008        du -sk $mountpoint/* >> $LOGFILE
2009        LogFile "--- end of list of files ---"
2010        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2011        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2012        cd "$old_pwd"
2013        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2014        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2015
2016        LogIt "ERROR: Sorry, your kernel is too big for your image"
2017        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2018    fi
2019    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2020    LogFile "INFO: Free space left on image = $free_space KB"
2021    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2022
2023    # make it bootable
2024    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2025    mkdir -p $mountpoint/etc
2026    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2027    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2028    echo -en "..."
2029    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2030
2031    if [ "$retval" -eq "0" ] ; then
2032        echo -en "...$DONE\n"
2033        if [ "$KERN_DISK_MADE" ] ; then
2034            [ "$imagefile" != "" ] && rm -f $imagefile
2035            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2036        fi
2037    else
2038        echo -en "...failed\n"
2039        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2040        [ "$imagefile" != "" ] && rm -f $imagefile
2041    fi
2042    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2043    return $retval
2044}
2045
2046
2047ParseModprobeForIncludes() {
2048local MODPROBE_CONF mpincfile includes include
2049
2050MODPROBE_CONF=/etc/modprobe.conf
2051mpincfile=$1
2052touch $mpincfile
2053if [ -a $MODPROBE_CONF ]; then
2054    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2055    if [ -n "$includes" ]; then
2056        for include in $includes
2057        do
2058            if [ -a "$include" ]; then
2059                echo $include >> $mpincfile
2060            fi
2061        done
2062    fi
2063fi
2064}
2065
2066
2067PrepareDataDiskImages() {
2068    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2069
2070    imagesdir=$MINDI_CACHE
2071    rm -f $imagesdir/mindi.iso
2072    needlist=$MINDI_TMP/what-we-need.txt
2073    bigdir=$MINDI_TMP/bigdir
2074    mkdir -p $bigdir/usr/bin
2075    mkdir -p $bigdir/usr/sbin
2076    includefile=$MINDI_TMP/$$.includefile.txt
2077
2078    # Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
2079    if [ -h "/lib64" ]; then
2080        mkdir -p lib || LogIt "ERROR: Unable to create lib in $mountpoint."
2081        if [ ! -h lib64 ]; then
2082            ln -s lib lib64 || LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2083        fi
2084    fi
2085    if [ -h "/lib" ]; then
2086        mkdir -p usr/lib || LogIt "ERROR: Unable to create usr/lib in $mountpoint."
2087        mv lib/* usr/lib 2> /dev/null
2088        if [ -d "lib" ]; then
2089            rmdir lib
2090        fi
2091    fi
2092    # Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2093    if [ -h "/sbin" ]; then
2094        mkdir -p usr/sbin || LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
2095        mv sbin/* usr/sbin 2> /dev/null
2096        if [ -d "sbin" ]; then
2097            rmdir sbin
2098        fi
2099    fi
2100    if [ -h "/bin" ]; then
2101        mkdir -p usr/bin || LogIt "ERROR: Unable to create usr/bin in $mountpoint."
2102        mv bin/* usr/bin 2> /dev/null
2103        if [ -d "bin" ]; then
2104            rmdir bin
2105        fi
2106    fi
2107
2108    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2109    if [ -e "$DEPLIST_FILE" ]; then
2110        lfiles="$DEPLIST_FILE $lfiles"
2111    fi
2112    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2113    ParseModprobeForIncludes $includefile
2114    lines=$(($lines+`cat $includefile | wc -l`))
2115    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2116    res=$?
2117    rm -f $includefile
2118    if [ "$YOUR_KERNEL_SUCKS" ]; then
2119        pwd=`pwd`
2120        cd "$MINDI_TMP"
2121        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2122            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2123        done
2124        for i in $EXTRA_MODS ; do
2125            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2126            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2127            for k in $j ; do
2128                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2129                LogFile "INFO: Added failsafe module $k to ramdisk"
2130            done
2131        done
2132        cd "$pwd"
2133    else
2134        ListKernelModulePaths >> $needlist
2135    fi
2136    if [ "$res" -ne "0" ] ; then
2137        Die "You have $res files present in dependency list\nbut absent from filesystem."
2138    fi
2139    FindAndAddUserKeyboardMappingFile
2140    mkdir -p $bigdir/tmp
2141    if [ _"$MONDO_SHARE" != _"" ]; then
2142        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2143        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2144    fi
2145    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2146    DropOptimizedLibraries $needlist $bigdir
2147    echo -en "Assembling dependency files"
2148
2149    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2150
2151    # also copy io.sys and msdos.sys, if we can find them
2152    for i in `mount | cut -d' ' -f3` ; do
2153        for j in io.sys msdos.sys ; do
2154            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2155        done
2156    done
2157
2158    # master boot record, too
2159    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2160    if [ "$i" ] ; then
2161        LogAll "INFO: Backing up $i's MBR"
2162        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2163        sleep 1
2164        sync
2165        j=$i
2166        [ -h "$j" ] && j=`readlink -f $j`
2167        LogAll "INFO: Creating /dev/boot_device ($j)"
2168        mkdir -p $bigdir/dev
2169        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2170    fi
2171
2172    old_pwd=`pwd`
2173    cd "$bigdir"
2174
2175    # Get terminfo content
2176    ti="usr/share/terminfo/l"
2177    if [ -d /$ti ]; then
2178        mkdir -p $ti
2179        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2180    fi
2181    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2182        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2183        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2184    fi
2185    if [ -d "/lib/dev-state" ]; then 
2186        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2187    fi
2188    cd "$old_pwd"
2189    echo -e "$DONE"
2190    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2191    MakeMountlist $MINDI_TMP/mountlist.txt
2192    CheckMountlist $MINDI_TMP/mountlist.txt
2193    mkdir -p $bigdir/tmp
2194    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2195    if [ _"$MONDO_SHARE" != _"" ]; then
2196        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2197    fi
2198    if [ $LVM != "false" ]; then
2199        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2200        if [ "$?" -ne "0" ]; then
2201            LVM="false"
2202            rm -f $bigdir/tmp/i-want-my-lvm
2203        else
2204            LogFile "Your i-want-my-lvm file content is:"
2205            LogFile "-----------------------------------"
2206            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2207            LogFile "-----------------------------------"
2208        fi
2209    fi
2210    LogFile "Your mountlist.txt file content is:"
2211    LogFile "-----------------------------------"
2212    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2213    LogFile "-----------------------------------"
2214
2215    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2216    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2217    if [ _"$MONDO_SHARE" != _"" ]; then
2218        for q in filelist.full.gz biggielist.txt ; do
2219            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2220            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2221        done
2222    fi
2223
2224    echo -en "Tarring and zipping the data content..."
2225    size_of_all_tools=`du -sk $bigdir | cut -f1`
2226    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2227    LogFile "Size of the data content"
2228    LogFile "------------------------"
2229    du -sk $imagesdir/*gz >> $LOGFILE
2230    LogFile "------------------------"
2231    echo -e "$DONE"
2232
2233    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2234    rm -rf $bigdir
2235    rm -f $needlist
2236}
2237
2238
2239ProcessLDD() {
2240    local incoming f d nd bd bnd
2241    read incoming
2242    while [ "$incoming" != "" ]; do
2243        # We take the full path name of the dyn. lib. we want
2244        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2245        for f in $incoming ; do
2246            # echo modified file name if one of the parent dir is a link
2247            # by replacing the original dirname by the destination of the link
2248            d="`dirname $f`"
2249            found="false"
2250            while [ "$d" != "/" ]; do
2251                if [ -h "$d" ]; then
2252                    nd=`readlink -f $d`
2253                    bd=`basename $d`
2254                    bnd=`basename $nd`
2255                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2256                    echo $d
2257                fi
2258                d="`dirname $d`"
2259            done
2260
2261            echo "$f"
2262            echo "`ReadAllLink $f`"
2263        done
2264        read incoming
2265    done
2266}
2267
2268
2269Prompt() {
2270    echo -en "$1"
2271    read line
2272}
2273
2274
2275ReadLine() {
2276    local i incoming
2277    read incoming
2278    i=0
2279    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2280        i=$(($i+1))
2281        read incoming
2282    done
2283    echo "$incoming"
2284}
2285
2286
2287SizeOfPartition() {
2288    local devpath drive res stub
2289    device=$1
2290    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2291        Die "Cannot find $device's size - is your /etc/fstab sane?"
2292    fi
2293    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2294        res=`SizeOfRaidPartition $device`
2295        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2296        echo "$res"
2297        return 0
2298    fi
2299    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2300    res=`$FDISK -s $device 2>> $LOGFILE`
2301    # end patch
2302    # take only the first in case of multiple mount (cifs, nfs, ...)
2303    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2304    [ "$res" = "" ] && res="-1"
2305    echo $res
2306    return 0
2307}
2308
2309
2310SizeOfRaidPartition() {
2311    local real_dev smallest_size silly tmp
2312
2313    silly=999999999
2314    smallest_size=$silly
2315
2316    for real_dev in `GetRaidDevMembers $1` ; do
2317        tmp=`SizeOfPartition $real_dev`
2318        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2319    done
2320
2321    if [ "$smallest_size" = "$silly" ] ; then
2322        echo "-1"
2323        return 1
2324    else
2325        echo "$smallest_size"
2326        return 0
2327    fi
2328}
2329
2330
2331StripExecutable()
2332{
2333    local tmpfile
2334
2335    tmpfile=$MINDI_TMP/stripped.$$.dat
2336    [ -d "$1" ] || [ -h "$1" ] && return
2337    cp -f $1 $tmpfile 2>> $LOGFILE
2338    strip $tmpfile 2> /dev/null
2339    if [ "$?" -eq "0" ] ; then
2340        cp -f $tmpfile $1 2>> $LOGFILE
2341        LogFile "INFO: Stripped binary $2"
2342    fi
2343    rm -f $tmpfile
2344}
2345
2346KernelVer() {
2347        local fkern_ver fname
2348
2349        fname=$1
2350        file $fname | grep -q gzip
2351        if [ "$?" -eq "0" ] ; then
2352            # Used by ia64
2353            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2354        else
2355            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2356        fi
2357        echo "$fkern_ver"
2358}
2359
2360
2361# WARNING: This function should just echo the final result !!!
2362#
2363TryToFindKernelPath() {
2364    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2365
2366    we_want_version=$KERVERRUN
2367    possible_kernels=""
2368    duff_kernels=""
2369    output=""
2370   
2371    if [ "$ARCH" = "ia64" ] ; then
2372       root="/boot/efi/efi"
2373    else
2374       root="/"
2375    fi
2376    # See if we're booted from a Xen kernel
2377    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2378    if [ -f /proc/xen/capabilities ]; then
2379        # It's a Xen kernel
2380        KERNEL_IS_XEN="yes"
2381        LogFile "INFO: It's a Xen kernel..."
2382    fi
2383
2384    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2385        [ ! -e "$fname" ] && continue
2386        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2387        fkern_ver=`KernelVer $fname`
2388        [ "$fkern_ver" = "" ] && continue
2389        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2390        [ -f "$fname" ] || continue
2391        [ -h "$fname" ] && continue
2392        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2393        file $fname | grep -q gzip
2394        if [ "$?" -eq "0" ] ; then
2395            # Used by ia64
2396            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2397                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2398                duff_kernels="$fname $duff_kernels"
2399            else
2400                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2401                possible_kernels="$fname $possible_kernels"
2402            fi
2403        else
2404            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2405                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2406                duff_kernels="$fname $duff_kernels"
2407            else
2408                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2409                possible_kernels="$fname $possible_kernels"
2410            fi
2411        fi
2412    done
2413    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2414        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2415    fi
2416    if [ ! "$possible_kernels" ] ; then
2417        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2418        possible_kernels="$duff_kernels"
2419        if [ ! "$possible_kernels" ] ; then
2420            LogAll "INFO: Sorry, no duff kernels either"
2421        else
2422            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2423            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2424        fi
2425    fi
2426    if [ $KERNEL_IS_XEN = "yes" ]; then
2427        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2428        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2429        FindMboot32Binary
2430    fi
2431    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2432    noof_kernels=`CountItemsIn "$possible_kernels"`
2433    if [ "$noof_kernels" -eq "0" ] ; then
2434        LogAll "Could not find your kernel."
2435        if [ -e "/boot/vmlinuz" ] ; then
2436            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2437            output=/boot/vmlinuz
2438        else
2439            output=""
2440        fi
2441    elif [ "$noof_kernels" -eq "1" ] ; then
2442        kp=`echo "$possible_kernels" | sed s/' '//`
2443        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2444        output="$kp"
2445    else
2446        for i in $possible_kernels ; do
2447            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2448                LogAll "INFO: OK, I used my initiative and found that "
2449                LogAll "INFO: $i is probably your kernel. "
2450                output="$i"
2451                break
2452            fi
2453        done
2454        if [ ! -n "$output" ]; then
2455            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2456                output=/boot/vmlinuz
2457                LogFile "INFO: Schlomo, this one's for you."
2458            else
2459                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2460                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2461                LogFile "INFO: $possible_kernels"
2462                output=""
2463            fi
2464        fi
2465    fi
2466    if [ $KERNEL_IS_XEN = "yes" ]; then
2467        if [ "$noof_xenkernels" -eq "0" ]; then
2468            xenkernelpath=""
2469        elif [ "$noof_xenkernels" -eq "1" ]; then
2470            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2471            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2472        else
2473            for i in $possible_xenkernels ; do
2474                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2475                    LogFile "INFO: OK, I used my initiative and found that "
2476                    LogFile "INFO: $i is probably your Xen kernel. "
2477                    xenkernelpath="$i"
2478                    break
2479                fi
2480            done
2481            if [ ! -n "$xenkernelpath" ]; then
2482                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2483                if [ ! -n "$new_possible_xenkernels" ]; then
2484                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2485                    LogFile "INFO: Using $xenkernelpath"
2486                else
2487                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2488                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2489                    LogFile "INFO: $possible_xenkernels"
2490                    output=""
2491                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2492                    LogFile "INFO: Using $xenkernelpath"
2493                fi
2494            fi
2495        fi
2496        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2497            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2498        fi
2499    fi
2500    LogAll "TryToFindKernelPath found $output"
2501    echo "$output"
2502}
2503
2504
2505TurnTgzIntoRdz() {
2506    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2507
2508    tgz_dir_fname=$1
2509    rdz_fname=$2
2510    kernelsize=$3
2511    maxsize=$(($BOOT_SIZE-$kernelsize))
2512    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2513    tempfile=$MINDI_TMP/temp.rd
2514    mountpoint=$MINDI_TMP/mnt1
2515    res=0
2516    echo -en "..."
2517    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2518    echo -en "..."
2519    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2520    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2521    echo -en "..."
2522    mkdir -p $mountpoint
2523    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2524    echo -en "..."
2525    old_pwd=`pwd`
2526    cd "$mountpoint"
2527
2528   
2529    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2530    for f in $tgz_dir_fname/*; do 
2531        if [ ! -r $f ]; then
2532            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2533        else
2534            cp -Rdf $f . 2>&1 >> $LOGFILE
2535        fi
2536    done
2537    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2538
2539    cd dev || Die "Can't cd to dev"
2540    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2541    rm -f dev-entries.tgz
2542    cd ..
2543
2544    for w in insmod.static insmod.static.old ; do
2545        s=`which $w 2> /dev/null`
2546        if [ -e "$s" ] ; then
2547            tar cf - -C / $s 2> /dev/null | tar xf -
2548        fi
2549    done
2550
2551    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2552   
2553    # Copy of files mandatory for ssh to automate mount if sshfs is used
2554    mkdir $mountpoint/.ssh
2555    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2556    echo > $mountpoint/tmp/myssh << EOF
2557ssh -o StrictHostKeyChecking=no $*
2558EOF
2559    chmod 755 $mountpoint/tmp/myssh
2560
2561    # Copy of files mandatory for ld.so
2562    cp -rp /etc/ld.so.c* $mountpoint/etc
2563
2564    # Handle the case where busybox and mount are dynamically linked
2565    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2566    if [ $? -eq 0 ]; then
2567        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2568        rm -f bin/mount
2569    fi
2570
2571    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2572    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2573    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2574        if [ -r $f ]; then
2575            echo $f >> $MINDI_TMP/minimal.lis
2576            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2577        fi
2578    done
2579    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2580        ReadAllLink $f >> $MINDI_TMP/minimal.lis
2581    done
2582    # Initial / are trucated by tar
2583    finallist=""
2584    # Remove directories from the list, as tar will create them anyway
2585    # and it may hurt if /lib is in it as on Debian/Ubuntu
2586    # recent bash says that -d is true for a link to a dir !
2587    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2588        if [ -e $f -a ! -d $f ] || [ -h $f -a ! -d $f ]; then
2589            finallist="$finallist $f"
2590        fi
2591    done
2592    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2593
2594    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2595    ln -sf /bin/bash bin/sh
2596    LogIt "INFO: Using bash as default shell"
2597    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2598
2599    # Avoids an issue on some distro (RHEL5)
2600    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2601
2602    mkdir -p $mountpoint/tmp
2603    # Management of udev (which includes modprobe in rules)
2604    ps auxww | grep -v grep | grep -qw udevd
2605    if [ $? -eq 0 ]; then
2606        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2607        LogIt "INFO: udev device manager found"
2608        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2609        # This avoids NIC remapping if on another machine at restore time on Debian at least
2610        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2611        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2612        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2613        # Do not do it if it's a link (Ubuntu 64 bits #503)
2614        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [  ! -h "/lib64/udev" ]; then
2615            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2616        fi
2617        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2618            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2619        fi
2620        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2621            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2622        fi
2623        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2624            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2625            lis=""
2626            # Get only the files which exist in that list
2627            # and potentially their symlink structure
2628            for i in $lis2; do
2629                if [ -h $i ]; then
2630                    j=$i
2631                    while [ -h $j ]; do
2632                        lis="$lis $j"
2633                        j=`readlink $j`
2634                    done
2635                    lis="$lis $j"
2636                elif [ -f $i ]; then
2637                    lis="$lis $i"
2638                fi
2639            done
2640            # And their deps
2641            LocateDeps $lis > $MINDI_TMP/udev.lis
2642            for i in $lis; do
2643                if [ "`echo $i | cut -c1`" = "/" ]; then
2644                    j=`echo $i | cut -c2-`
2645                    [ "$j" != "" ] && rm -f $j
2646                fi
2647            done
2648            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2649            rm -f $MINDI_TMP/udev.lis
2650        else
2651            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2652            LogAll "         mindi will use static devices which may cause problems"
2653            rm -f $mountpoint/tmp/USE-UDEV
2654        fi
2655    fi
2656
2657    # Management of potential HW info (ProLiant only at the moment)
2658    rm -rf $MINDI_CACHE/bkphw
2659    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2660    if [ -d $MINDI_CACHE/bkphw ]; then
2661        LogIt "INFO: Hardware Information found and saved ..."
2662        cp -rp $MINDI_CACHE/bkphw .
2663        if [ -f $MINDI_CACHE/tools.files ]; then
2664            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2665            LocateDeps $lis > $MINDI_TMP/tools.lis
2666            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2667        fi
2668        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2669            mv -f $MINDI_CACHE/mindi-rsthw .
2670            chmod 755 ./mindi-rsthw
2671        fi
2672        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2673    fi
2674
2675    # Management of perl scripts delivered needed at restore time
2676    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2677    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2678
2679    for w in cdrom groovy-stuff ; do
2680        mkdir -p mnt/$w
2681    done
2682
2683    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2684
2685    cd "$old_pwd"
2686    echo -en "..."
2687    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2688        cd "$MINDI_TMP"
2689        needed_modules_path=lib/modules/$FAILSAFE_KVER
2690    else
2691        cd /
2692        if [ "${kernelname}" != "" ]
2693        then
2694            needed_modules_path=lib/modules/${kernelname}
2695        else
2696            needed_modules_path=lib/modules/$KERVERRUN
2697        fi
2698    fi
2699
2700    needed_modules=""
2701    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2702
2703    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2704        # For PXE boot
2705        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2706    fi
2707    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2708        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2709    fi
2710    for i in $DENY_MODS; do
2711        LogFile "INFO: Removing $i from the list of modules to load"
2712        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2713    done
2714
2715    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2716    for i in $list_of_groovy_mods ; do
2717        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2718    done
2719
2720    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2721        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2722        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2723        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2724        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2725        # Uncompress modules if not using udev and native modprobe
2726        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2727            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2728                LogFile "INFO: Uncompressing $i"
2729                gunzip -f $mountpoint/$i
2730            fi
2731        fi
2732        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2733            echo "Replacing module symlink ($i) with actual file"
2734            rm -f $mountpoint/$i
2735            cp -Lf $i $mountpoint/$i
2736            ls -l $mountpoint/$i
2737        fi
2738    done
2739
2740    # Also copy modules.* in case of udev so that normal modprobe works
2741    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2742
2743    # Copy FW in case some drivers needs it
2744    for d in "/lib" "/usr/lib"; do
2745        if [ -d "$d/firmware" ]; then
2746            cp -a "$d/firmware" "$mountpoint/$d"
2747        fi
2748    done
2749
2750    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2751    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2752        if [ -d "$d/multipath" ]; then
2753            cp -a "$d/multipath" "$mountpoint/$d"
2754        fi
2755    done
2756
2757    # Copy an additional ProLiant tool for OBDR support
2758    if [ -f $MINDI_TMP/OBDR ]; then
2759        found=0
2760        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2761            mkdir -p $mountpoint/usr/bin
2762            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2763            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2764            found=1
2765        fi
2766        if [ -x /usr/bin/sg_wr_mode ]; then
2767            mkdir -p $mountpoint/usr/bin
2768            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2769            LocateDeps $lis > $MINDI_TMP/obdr.lis
2770            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2771            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2772            found=1
2773        fi
2774        if [ $found -eq 0 ]; then
2775            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2776            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2777        fi
2778    fi
2779
2780    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2781        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2782        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2783        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2784        rm -f $mountpoint/sbin/devfsd
2785    fi
2786    cd "$old_pwd"
2787    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2788    if [ _"$MONDO_SHARE" != _"" ]; then
2789        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2790        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2791        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2792        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2793        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2794        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2795        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2796        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2797        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2798    fi
2799    mkdir -p $mountpoint/proc
2800    LogFile "---------------------------"
2801    LogFile "Content of initial ramdisk:"
2802    LogFile "---------------------------"
2803    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2804    LogFile "---------------------------"
2805
2806    # Determine what filesystem to use for initrd image
2807    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2808    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2809    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2810    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2811        # say what will be used
2812        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2813        # kernel expects linuxrc in ext2 filesystem
2814        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2815        # unmount loop filesystem and create image file using the standard approach
2816        umount $mountpoint || Die "Cannot unmount $tempfile"
2817        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2818        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2819            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2820        else
2821            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2822        fi
2823        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2824        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2825        rm -f ${rdz_fname}.tmp
2826        # log that we are done
2827        LogFile "      ...done."
2828    elif [ "$gvFileSystem" = "initramfs" ]; then
2829        # say what will be used
2830        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2831        # make sure that cpio is there
2832        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2833        # go into filesystem
2834        cd "$mountpoint"
2835        # kernel expects init in cpio filesystem
2836        ln -sf sbin/init init
2837        # create cpio image file and unmount loop filesystem
2838        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2839        cd "$old_pwd"
2840        umount $mountpoint || Die "Cannot unmount $tempfile"
2841        # log that we are done
2842        LogFile "      ...done."
2843    else
2844        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2845    fi
2846
2847    if [ "$res" -eq "0" ] ; then
2848        echo -en "..."
2849    else
2850        echo -en "\rMade an rdz WITH ERRORS.           \n"
2851    fi
2852    return 0
2853}
2854
2855
2856##############################################################################
2857#----------------------------------- Main -----------------------------------#
2858##############################################################################
2859
2860# Now we can create what we need
2861mkdir -p $MINDI_TMP
2862
2863# Purge from potential old run
2864if [ _"$MINDI_CACHE" = _"" ]; then
2865    Die "MINDI_CACHE undefined"
2866fi
2867
2868# --nolog needs to be first, and is used in analyze-my-lvm
2869if [ "$1" = "--nolog" ] ; then
2870    shift
2871    LOGFILE=/dev/stderr
2872else
2873    > $LOGFILE
2874fi
2875if [ "$1" = "--printvar" ] ; then
2876    shift
2877    if [ _"$1" != _"" ] ; then
2878        set | grep -Ew "^$1" | cut -d= -f2
2879    fi
2880    exit 0
2881fi
2882
2883LogFile "mindi v$MINDI_VERSION"
2884LogFile "$ARCH architecture detected"
2885LogFile "mindi called with the following arguments:"
2886echo "$@">> $LOGFILE
2887LogFile "Start date : `date`"
2888LogFile "-----------------------------"
2889
2890[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2891
2892# Log some capital variables
2893[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2894[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2895LogFile "MONDO_SHARE = $MONDO_SHARE"
2896LogFile "MINDI_LIB = $MINDI_LIB"
2897LogFile "MINDI_SBIN = $MINDI_SBIN"
2898LogFile "MINDI_CONF = $MINDI_CONF"
2899if [ -f $MINDI_CONFIG ]; then
2900    LogFile "-----------------------------"
2901    LogFile " Mindi configuration file    "
2902    LogFile "-----------------------------"
2903    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2904    LogFile "-----------------------------"
2905fi
2906LogFile "In Mindi"
2907LogFile "--------"
2908LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2909LogFile "BOOT_SIZE = $BOOT_SIZE"
2910LogFile "--------"
2911
2912trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2913
2914# Sanity checks
2915which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2916which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2917which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2918which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2919if which awk &> /dev/null ; then
2920    if ! which gawk &> /dev/null ; then
2921        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2922    fi
2923fi
2924which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2925[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2926
2927[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2928
2929# Update the PATH variable if incomplete
2930if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2931    PATH=$PATH:/sbin:/usr/sbin
2932    export PATH
2933    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2934    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2935    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2936fi
2937
2938# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2939if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2940    source $MINDI_LIB/FindDistroFailsafe
2941    # Log kernel image
2942    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2943else
2944    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2945fi
2946
2947if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2948    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2949fi
2950
2951### TODO
2952### Fix as it's not mandatory on ia64
2953if [ "$ARCH" = "ia64" ] ; then
2954    if which elilo &> /dev/null ; then
2955        LILO_EXE=elilo
2956    else
2957        LILO_EXE=`which false 2> /dev/null`
2958    fi
2959else
2960    FindIsolinuxBinary
2961fi
2962trap "Aborted" SIGTERM
2963DONE="\r\t\t\t\t\t\t\t\tDone.         "
2964kernelpath=""
2965MONDO_ROOT=/var/cache/mondo
2966mkdir -p $MONDO_ROOT
2967
2968if [ -d "/proc/lvm" ]; then
2969    # LVM v1
2970    LVMCMD=""
2971    LVM="v1"
2972elif [ -d "/dev/mapper" ]; then
2973    # LVM v2
2974    LVMCMD="lvm"
2975    LVM="v2"
2976else
2977    LVM="false"
2978fi
2979
2980if [ -e "/proc/cmdline" ]; then
2981    CMDLINE="/proc/cmdline"
2982elif [ -e "/tmp/cmdline" ]; then
2983    CMDLINE="/tmp/cmdline"
2984else
2985    CMDLINE="/dev/null"
2986fi
2987
2988LogFile "INFO: LVM set to $LVM"
2989LogFile "----------"
2990LogFile "mount result:"
2991LogFile "-------------"
2992mount >> $LOGFILE
2993if [ -e /etc/raidtab ]; then
2994    LogFile "-------------"
2995    LogFile "/etc/raidtab content:"
2996    LogFile "-------------"
2997    cat /etc/raidtab >> $LOGFILE
2998else
2999    LogFile "No file /etc/raidtab"
3000fi
3001if [ -e /etc/mdadm.conf ]; then
3002    LogFile "-------------"
3003    LogFile "/etc/mdadm.conf content:"
3004    LogFile "-------------"
3005    cat /etc/mdadm.conf >> $LOGFILE
3006else
3007    LogFile "-------------"
3008    LogFile "No file /etc/mdadm.conf"
3009fi
3010LogFile "-------------"
3011LogFile "cat $CMDLINE"
3012LogFile "-------------"
3013cat $CMDLINE >> $LOGFILE
3014LogFile "-------------"
3015LogFile "cat /proc/swaps:"
3016LogFile "-------------"
3017cat /proc/swaps >> $LOGFILE
3018LogFile "-------------"
3019if [ -e /proc/mdstat ]; then
3020    LogFile "cat /proc/mdstat:"
3021    LogFile "-------------"
3022    cat /proc/mdstat >> $LOGFILE
3023else
3024    LogFile "No pseudo file /proc/mdstat"
3025fi
3026LogFile "-------------"
3027LogFile "cat /proc/partitions:"
3028LogFile "-------------"
3029cat /proc/partitions >> $LOGFILE
3030LogFile "-------------"
3031LogFile "cat /proc/filesystems:"
3032LogFile "-------------"
3033cat /proc/filesystems >> $LOGFILE
3034LogFile "-------------"
3035LogFile "lsmod result:"
3036LogFile "-------------"
3037lsmod >> $LOGFILE
3038MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3039if [ -x /usr/sbin/esxcfg-module ]; then
3040    LogFile "-------------"
3041    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3042    LogFile "-------------"
3043    LogFile "VMWare modules"
3044    LogFile "-------------"
3045    /usr/sbin/esxcfg-module -l >> $LOGFILE
3046    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3047fi
3048LogFile "Liste of extra modules is:" 
3049LogFile "-------------" 
3050LogFile "$EXTRA_MODS" 
3051LogFile "-------------" 
3052LogFile "FORCE_MODS:"
3053LogFile "-------------"
3054LogFile "$FORCE_MODS"
3055LogFile "-------------"
3056LogFile "DENY_MODS:"
3057LogFile "-------------"
3058LogFile "$DENY_MODS"
3059LogFile "-------------"
3060LogFile "df result:"
3061LogFile "----------"
3062df -aT >> $LOGFILE
3063LogFile "-------------"
3064LogFile "df -i result:"
3065LogFile "----------"
3066df -i >> $LOGFILE
3067LogFile "-------------"
3068if [ -r /boot/grub/menu.lst ]; then
3069    LogFile "-------------"
3070    LogFile "INFO: /boot/grub/menu.lst content"
3071    LogFile "-------------"
3072    cat /boot/grub/menu.lst >> $LOGFILE
3073    LogFile "-------------"
3074fi
3075if [ -r /boot/grub/grub.conf ]; then
3076    LogFile "-------------"
3077    LogFile "INFO: /boot/grub/grub.conf content"
3078    LogFile "-------------"
3079    cat /boot/grub/grub.conf >> $LOGFILE
3080    LogFile "-------------"
3081fi
3082if [ -r /boot/grub/grub.cfg ]; then
3083    LogFile "-------------"
3084    LogFile "INFO: /boot/grub/grub.cfg content"
3085    LogFile "-------------"
3086    cat /boot/grub/grub.cfg >> $LOGFILE
3087    LogFile "-------------"
3088fi
3089if [ -r /boot/grub/device.map ]; then
3090    LogFile "-------------"
3091    LogFile "INFO: /boot/grub/device.map content"
3092    LogFile "-------------"
3093    cat /boot/grub/device.map >> $LOGFILE
3094    LogFile "-------------"
3095fi
3096if [ -r /etc/lilo.conf ]; then
3097    LogFile "-------------"
3098    LogFile "INFO: /etc/lilo.conf content"
3099    LogFile "-------------"
3100    cat /etc/lilo.conf >> $LOGFILE
3101fi
3102LogFile "Full fdisk info"
3103LogFile "---------------"
3104$FDISK -l >> $LOGFILE
3105LogFile "----------------"
3106LogFile "List of extra modules is:"
3107LogFile "$EXTRA_MODS"
3108LogFile "-------------"
3109
3110# Compute libata version
3111laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3112# If libata v2 is used then remove ide-generic as it will perturbate boot
3113if [ "`echo $MODULES | grep libata`" ]; then
3114    if [ "$laver" = "2" ]; then
3115        DENY_MODS="$DENY_MODS ide-generic"
3116        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3117        LogFile "-------------"
3118    fi
3119fi
3120
3121# Check for McAfee which disturbs the access to some files (tgz in articular)
3122if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3123    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3124    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3125    LogFile "WARNING: You have two options:"
3126    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3127    LogFile "WARNING:  - Disable the scanner during the backup"
3128fi
3129
3130# Check for ISO_CMD command
3131if [ ! -x $ISO_CMD ]; then
3132    LogFile "NOTE: No CD image (ISO file) utility found"
3133fi
3134
3135FLOPPY_WAS_MOUNTED=""
3136for mtpt in /media/floppy /mnt/floppy /floppy ; do
3137    if mount | grep -w $mtpt &> /dev/null ; then
3138        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3139        umount $mtpt
3140    fi
3141done
3142
3143#
3144# If we have a USB device we need to store info
3145# and remove it from the parameters line
3146#
3147if [ "$#" -ne "0" ] ; then
3148    if [ "$1" = "--usb" ] ; then
3149        shift
3150        USBDEVICE=$1
3151        if [ _"$USBDEVICE" = _"" ]; then
3152            Die "No USB device specified"
3153        fi
3154        shift
3155    fi
3156fi
3157
3158if [ "$#" -ne "0" ] ; then
3159    if [ "$1" = "--findkernel" ] ; then
3160        resk=`TryToFindKernelPath`
3161        # Avoids logfile content for mondo
3162        export MONDO_SHARE=""
3163        if [ "$resk" = "" ] ; then
3164            if [ $KERNEL_IS_XEN = "yes" ]; then
3165                echo "$xenkernelpath"
3166                LogFile "INFO: xenkernelpath = $xenkernelpath"
3167                MindiExit 0
3168            else
3169                MindiExit -1
3170            fi
3171        else
3172            echo "$resk"
3173            LogFile "INFO: kernelpath = $resk"
3174            MindiExit 0
3175        fi
3176    elif [ "$1" = "--locatedeps" ] ; then
3177        [ ! "$2" ] && Die "Please specify the binary to look at"
3178        LocateDeps $*
3179        # Avoids logfile content for mondo
3180        export MONDO_SHARE=""
3181        MindiExit $?
3182    elif [ "$1" = "--readalllink" ] ; then
3183        [ ! "$2" ] && Die "Please specify the binary to look at"
3184        # Avoids logfile content for mondo
3185        export MONDO_SHARE=""
3186        ReadAllLink $2
3187        MindiExit $?
3188    elif [ "$1" = "--makemessage" ] ; then
3189        MakeMessageFile | cut -c1-80
3190        MindiExit 0
3191    elif [ "$1" = "--makemountlist" ] ; then
3192        [ ! "$2" ] && Die "Please specify the output file"
3193        MakeMountlist $2
3194        CheckMountlist $2
3195        # Avoids logfile content for mondo
3196        export MONDO_SHARE=""
3197        MindiExit $?
3198    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3199        echo "Mindi v$MINDI_VERSION"
3200        # Avoids logfile content for mondo
3201        export MONDO_SHARE=""
3202        MindiExit 0
3203    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3204        MONDO_TMP=$2
3205        # Change MINDI_TMP for the one provided by mondo
3206        # So that it can get back the built files
3207        if [ _"$MONDO_TMP" = _"" ]; then
3208            Die "MONDO_TMP is empty, aborting"
3209        fi
3210        if [ _"$MONDO_TMP" = _"/" ]; then
3211            Die "MONDO_TMP is /, aborting"
3212        fi
3213        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3214        rmdir $MINDI_TMP
3215        export MINDI_TMP=$MONDO_TMP
3216        mkdir -p $MINDI_TMP
3217
3218        # This is the scratch dir in mondo - subdir images
3219        MINDI_CACHE=$3
3220
3221        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3222        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3223       
3224###
3225### Sq-Modification...
3226### Attempt to locate kernel specific module path
3227### if module path is found then use it other wise use uname -r to set it...
3228###
3229        if [ $KERNEL_IS_XEN = "yes" ]; then
3230            LogAll "INFO: xenkernelpath = $xenkernelpath"
3231        fi
3232        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3233        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3234        then
3235           LogAll "WARNING: Module path for ${kernelpath} not found..."
3236           LogAll "         using running kernel\'s modules."
3237           kernelname=$KERVERRUN
3238        else
3239           LogAll "Using modules for kernel: ${kernelname}"
3240        fi
3241        LogAll "INFO: kernelname = $kernelname"
3242        LogAll "INFO: kernelpath = $kernelpath"
3243###
3244### end of Sq-Modification
3245###
3246        TAPEDEV=$5
3247        TAPESIZE=$6
3248        FILES_IN_FILELIST=$7
3249        USE_LZO=$8
3250        CDRECOVERY=$9
3251        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3252            IMAGE_DEVS=""
3253        else
3254            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3255        fi
3256        if [ "${11}" ] ; then
3257            LILO_OPTIONS=""
3258    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3259        fi
3260        LAST_FILELIST_NUMBER=${12}
3261        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3262        export MINDI_EXCLUDE_DEVS="${14}"
3263        USE_COMP="${15}"
3264        USE_LILO="${16}"
3265        USE_STAR="${17}"
3266        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3267        DIFFERENTIAL="${19}"
3268        USE_GZIP="${20}"
3269        NOT_BOOT="${21}"
3270        [ "$USE_COMP" = "" ] && USE_COMP=yes
3271        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3272        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3273        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3274        # MONDO_ROOT is the real scratchdir
3275        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3276        if [ _"$MONDO_ROOT" != _"" ]; then
3277            mkdir -p $MONDO_ROOT
3278        else
3279            Die "MONDO_ROOT is undefined"
3280        fi
3281    else
3282        LogScreen "Syntax: mindi (--custom ....)"
3283        MindiExit -1
3284    fi
3285fi
3286
3287if [ _"$MINDI_CACHE" != _"" ]; then
3288    rm -rf $MINDI_CACHE/* 2> /dev/null
3289    mkdir -p $MINDI_CACHE
3290fi
3291
3292[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3293
3294if [ _"$MONDO_SHARE" = _"" ]; then
3295    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3296    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3297    LogIt "BusyBox sources are available from http://www.busybox.net"
3298    LogIt "------------------------------------------------------------------------------"
3299else
3300    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3301fi
3302if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3303    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3304else
3305    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3306    MindiExit -1
3307fi
3308
3309for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3310    modinfo $i 2> /dev/null 1> /dev/null
3311    if [ $? -eq 0 ]; then
3312        modprobe $i 2>&1 > /dev/null
3313    fi
3314done
3315
3316KERN_DISK_MADE=""
3317
3318LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3319LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3320LogFile "NOT_BOOT = '$NOT_BOOT'"
3321if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3322    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3323    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3324    MakeMountlist $MINDI_TMP/mountlist.txt
3325    CheckMountlist $MINDI_TMP/mountlist.txt
3326    mkdir -p $MINDI_TMP/small-all/tmp
3327    cd "$MINDI_TMP/small-all"
3328    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3329    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3330    sleep 2
3331    LogIt "Done. Exiting."
3332    MindiExit 0
3333fi
3334
3335if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3336    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3337fi
3338
3339if [ "$kernelpath" = "" ] ; then
3340    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3341    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3342    read ch
3343    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3344        USE_OWN_KERNEL="yes"
3345    else
3346        USE_OWN_KERNEL="no"
3347    fi
3348    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3349        YOUR_KERNEL_SUCKS=""
3350        kernelpath=`TryToFindKernelPath`
3351        if [ "$kernelpath" = "" ] ; then
3352            echo -n "Please enter kernel path : "
3353            read kernelpath
3354        fi
3355    else
3356        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3357    fi
3358fi
3359if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3360    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3361    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3362        source $MINDI_LIB/FindDistroFailsafe
3363        # Log kernel image
3364        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3365        kernelpath="$FAILSAFE_KBIN"
3366        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3367        LogIt "      The failsafe kernel is $kernelpath."
3368        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3369        LogIt "      disks then it may still be a result of a problem with your kernel."
3370        pwd=`pwd`
3371        cd "$MINDI_TMP"
3372        mkdir -p lib/modules
3373        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3374        cd "$pwd"
3375    else
3376        kernelpath=$MINDI_LIB/vmlinuz
3377        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3378        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3379        LogIt "      disks then it may still be a result of a problem with your kernel."
3380        pwd=`pwd`
3381        cd "$MINDI_TMP"
3382        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3383        cd "$pwd"
3384    fi
3385    YOUR_KERNEL_SUCKS="Your kernel sucks"
3386fi
3387echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3388[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3389
3390[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3391
3392PrepareDataDiskImages
3393
3394ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3395rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3396export ramdisk_size=$rds
3397
3398LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3399if [ "$ARCH" = "ia64" ] ; then
3400    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3401else
3402    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3403fi
3404
3405[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3406...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3407
3408if [ _"$MONDO_SHARE" = _"" ]; then
3409    ListImagesForUser
3410    OfferToMakeBootableISO
3411    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3412        OfferToMakeBootableUSB
3413    fi
3414    LogAll "Finished."
3415elif [ "$TAPEDEV" ] ; then
3416    if [ "$ARCH" != "ia64" ] ; then
3417        # We need to keep the img file as boot file for ia64 platform
3418        rm -f $MINDI_CACHE/{*img,*iso}
3419    else
3420        rm -f $MINDI_CACHE/*iso
3421    fi
3422    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3423        OfferToMakeBootableUSB
3424    fi
3425    OfferToMakeBootableISO
3426    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3427        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3428    else
3429        Die "Cannot find all.tar.gz, to be written to tape"
3430    fi
3431elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3432    OfferToMakeBootableUSB
3433else
3434    OfferToMakeBootableISO
3435fi
3436# cleanup
3437LogAll "INFO: $FRIENDLY_OUTSTRING"
3438for mtpt in $FLOPPY_WAS_MOUNTED ; do
3439    mount $mtpt
3440done
3441MindiExit 0
Note: See TracBrowser for help on using the repository browser.