Context Navigation

source: MondoRescue/branches/2.2.9/mindi/rootfs/sbin/init@ 2768

Visit:

Last change on this file since 2768 was 2768, checked in by Bruno Cornec, 13 years ago
Log content of mondo-restore.cfg
Property svn:keywords set to `Id`
File size: 26.1 KB

Rev	Line
[1]	1	#!/bin/sh
	2	#
[736]	3	# $Id: init 2768 2011-04-21 11:00:37Z bruno $
[1]	4	#
[736]	5	# init script launched during the restore process
[1]	6	#------------------------------------------------------------
	7
	8
	9	CaughtSoftReset() {
[1747]	10	trap SIGTERM
	11	reboot
[1]	12	}
	13
	14
	15	ConfigureLoggingDaemons() {
[1747]	16	echo -en "Running klogd..."
	17	klogd -c 2 > /dev/null 2> /dev/null
	18	echo -en "Done.\nRunning syslogd..."
	19	syslogd > /dev/null 2> /dev/null
	20	echo "Done."
	21	LogIt "klogd and syslogd have been started."
[1]	22	}
	23
	24
	25
	26	CopyBootDevEntry() {
[1747]	27	local outfile devfile
	28	devfile=/dev/boot_device
	29	outfile=`cat /BOOTLOADER.DEVICE 2> /dev/null`
	30	[ ! "$outfile" ] && return 0
	31	echo -en "Copying boot device to $outfile..."
	32	if [ -e "$outfile" ] ; then
[2174]	33	echo "not needed."
[1410]	34	return 0
[1747]	35	fi
	36	mkdir -p $outfile
	37	rmdir $outfile
	38	cp -pRdf $devfile $outfile
	39	if [ "$?" -ne "0" ] ; then
[1410]	40	echo "Failed."
	41	return 1
[1747]	42	else
[1410]	43	echo "OK."
	44	return 0
[1747]	45	fi
[1]	46	}
	47
	48
	49
	50	Die() {
[1747]	51	LogIt "Fatal error! $1" 1
	52	exit 1
[1]	53	}
	54
	55
	56
	57	ExtractDevTarballs() {
[1747]	58	cd /
	59	for fname in ataraid.tgz ida.tgz i2o.tgz rd.tgz raw.tgz cciss.tgz nst.tgz dm.tgz vc.tgz ; do
	60	if [ ! -e "/$fname" ] ; then
	61	LogIt "/$fname not found; cannot extract to /." 1
	62	else
	63	echo -en "\rExtracting /$fname... "
	64	tar -zxf /$fname \|\| LogIt "Error occurred while extracting /$fname"
	65	fi
	66	done
	67	echo -en "\r"
	68	LogIt "Extracted additional /dev entries OK. " 1
[1]	69	}
	70
	71
	72
	73	LaunchTerminals() {
[2727]	74	# Depending on busybox version, syntax of openvt is different
	75	/bin/busybox --help 2>&1 \| head -1 \| grep -Eq "1\.7\.3\|1\.2\."
	76	if [ "$?" -eq "0" ] ; then
	77	opt=""
	78	else
	79	# 1.18.3 requires -c
	80	opt="-c"
	81	fi
	82	openvt $opt 2 /bin/sh
	83	openvt $opt 3 /bin/sh
	84	openvt $opt 4 /bin/sh
	85	openvt $opt 5 /bin/sh
	86	openvt $opt 6 /bin/sh
	87	openvt $opt 7 /bin/sh /sbin/wait-for-petris
	88	openvt $opt 8 /usr/bin/tail -f $LOGFILE
[1922]	89	# May avoid shell error messages
	90	chmod 666 /dev/tty* /dev/console
[2484]	91	# By default first serial line is configured as tty
	92	# Required to have a correct serial console support (MP on ia64 or VSP with iLO2 e.g.)
	93	for i in `cat /proc/cmdline` ; do
	94	echo $i \| grep -qi serial= && serial=`echo $i \| cut -d= -f2`
	95	done
[2487]	96	# Doing that is only valid when using a real serial line
	97	if [ -f $serial ]; then
[2498]	98	LogIt "Redirecting serial $serial to /dev/tty" 1
[2487]	99	ln -s -f $serial /dev/tty
	100	fi
[1]	101	}
	102
	103
	104	LoadKeymap() {
[1747]	105	local fname
	106	fname=`cat /tmp/KEYMAP-LIVES-HERE 2> /dev/null`
	107	[ "$fname" = "" ] && return
	108	if which loadkeys > /dev/null 2> /dev/null ; then
	109	loadkeys $fname
	110	else
[2731]	111	LogIt "Using default US keyboard map." 1
[1747]	112	fi
[1]	113	}
	114
	115
	116	UntarTapeStuff() {
[1747]	117	local old_pwd res
	118	old_pwd=`pwd`
	119	cd $GROOVY
	120	[ "$1" != "" ] && tapedev=$1
[1983]	121	[ ! "$tapedev" ] && tapedev=`grep media-dev /tmp/mondo-restore.cfg 2>/dev/null \| tr -s ' ' ' ' \| cut -d' ' -f2`
[1962]	122	mt -f $tapedev rewind
[1958]	123	mt -f $tapedev fsf 2
[1747]	124	dd if=$tapedev bs=32k count=1024 \| tar -zx
	125	res=$?
	126	if [ "$res" -eq "0" ] ; then
[1958]	127	# Store the dev name in case we changed it interactively
[1983]	128	if [ -f "/tmp/mondo-restore.cfg" ]; then
	129	sed -i "s/^media-dev .*$/media-dev $tapedev/" /tmp/mondo-restore.cfg
	130	fi
[1747]	131	fi
	132	cd $old_pwd
	133	return $res
[1]	134	}
	135
	136	HandleTape() {
[1747]	137	local res tapedev
	138	tapedev="" ; # will be set by UntarTapeStuff()
[1963]	139
[1968]	140	# Here we can add the USB storage module, it's working even with OBDR !
[1963]	141	modprobe -q usb-storage
[1968]	142	# Tape takes some time to appear
	143	sleep 10
[1747]	144	cd $GROOVY
[1958]	145	UntarTapeStuff $tapedev
[1747]	146	res=$?
	147	while [ "$res" -ne "0" ] ; do
	148	LogIt "$tapedev failed to act as extended data disk for booting." 1
	149	LogIt "Please specify an alternate tape device," 1
[1885]	150	LogIt "or hit <Enter> to boot from another media." 1
[1747]	151	echo -en "---> "
	152	read tapedev
	153	if [ "$tapedev" ] ; then
	154	LogIt "User specified $tapedev instead"
	155	UntarTapeStuff $tapedev
	156	res=$?
	157	else
	158	LogIt "User opted not to specify an alternate tapedev"
	159	res=1
[1]	160	break
[1747]	161	fi
	162	done
[1962]	163	# For post-init
	164	export TAPEDEV=$tapedev
[1]	165
[1747]	166	if [ "$res" -ne "0" ] ; then
[1410]	167	cd /
[1885]	168	LogIt "Failed to use tape as extended datadisk. Reverting to another media." 1
	169	HandleCDROM
[1410]	170	res=$?
[1747]	171	else
[1410]	172	LogIt "Using tape as extended datadisk. Good." 3
	173	echo "Using tape as extd ddisk." > /tmp/TAPEDEV-HAS-DATA-DISKS
	174	res=0
[1747]	175	CD_MOUNTED_OK=yes
	176	fi
	177	return $res
[1]	178	}
	179
	180
	181
[1885]	182	HandleCDROM() {
[1825]	183	# Just in case we have an iLO ensure we will map it correctly
[1830]	184	echo "$DENY_MODS" \| grep -q "usb-storage "
[1829]	185	if [ $? -eq 0 ]; then
	186	return
	187	fi
[1826]	188	echo "Activating a potential USB Storage device"
[1922]	189	modprobe -q usb-storage
[1826]	190	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	191	sleep 1
	192	echo -en "."
	193	done
[1825]	194
[1747]	195	find-and-mount-cdrom
	196	res=$?
	197	if [ "$res" -ne "0" ] ; then
[898]	198	LogIt "First call to find-and-mount-cdrom failed." 1
	199	LogIt "Sleeping for 3 seconds and trying again." 1
	200	sleep 3
	201	find-and-mount-cdrom
	202	res=$?
[1747]	203	fi
	204	if [ "$res" -eq "0" ] ; then
[898]	205	LogIt "OK, I am running on a CD-ROM. Good." 3
[1747]	206	CD_MOUNTED_OK=yes
	207	else
[1885]	208	LogIt "You probably not have the right drivers" 3
	209	LogIt "to support the hardware on which we are running" 3
	210	LogIt "Your archives are probably fine but" 3
	211	LogIt "your tape streamer and/or CD-ROM drive are unsupported at that point." 3
[898]	212	CD_MOUNTED_OK=""
[1747]	213	fi
	214	return 0
[1]	215	}
	216
	217
	218	PauseForRaids() {
[1747]	219	if [ "`dmesg \| grep -i "RAID Controller"`" != "" ] \|\| [ "`dmesg \| grep -i "Vendor: 3ware"`" != "" ] ; then
	220	LogIt "RAID controller(s) detected. Pausing 10 seconds to let them warm up." 1
	221	echo -en "Pausing..."
	222	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	223	sleep 1
	224	echo -en "$(($i*10))%..."
	225	done
	226	echo "Done."
	227	fi
[1]	228	}
	229
	230
	231	# 06/13/2002 --- DuckX's & Hugo's new routine
	232	# 10/11/2003 --- added a simple devfsd.conf file
	233	# 01/24/2005 --- cater for arbitrary locations of devfsd.conf by using the
	234	# config file path compiled into devfsd
	235	RunDevfsd() {
[1747]	236	loc=`which devfsd 2> /dev/null`
	237	if [ "$loc" != "" ] ; then
[1]	238	LogIt "Devfs found. Testing kernel support..."
	239	if [ ! -e "/dev/.devfsd" ] ; then
[746]	240	mount -t devfs devfs /dev 2>> $LOGFILE
[1747]	241	if [ "$?" -ne "0" ] ; then
[1]	242	LogIt "Error while trying to mount devfs"
	243	else
	244	LogIt "Devfs mounted OK"
	245	fi
	246	fi
	247	#check if the kernel supports devfs
	248	if [ -e "/dev/.devfsd" ] ; then
	249	[ -d "/proc/1" ] \|\| mount -n /proc
	250	LogIt "Kernel support found. Creating config file and starting devfsd"
[911]	251	conffile=`strings $loc \| grep -E "devfsd.conf$"`
[1]	252	[ "$conffile" ] \|\| conffile="/etc/devfsd.conf"
	253	confpath=`echo $conffile \| sed "s/\/devfsd\.conf$//"`
	254	[ -d "$confpath" ] \|\| mkdir -p $confpath
	255	echo -en "REGISTER .* MKOLDCOMPAT\nUNREGISTER .* RMOLDCOMPAT\n" > $conffile
	256	devfsd /dev &
	257	sleep 5
	258	else
	259	LogIt "No devfs kernel support."
	260	fi
[1747]	261	fi
[1]	262	}
	263
[1718]	264	# Taken from udev management in Mandriva 2008.0. Kudos guys
	265	make_extra_nodes () {
	266	# there are a few things that sysfs does not export for us.
	267	# these things are listed in /etc/udev/links.conf
	268	grep '^[^#]' /etc/udev-links.conf \| \
	269	while read type name arg1; do
	270	[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] \|\|continue
	271	case "$type" in
	272	L) ln -s $arg1 /dev/$name ;;
	273	D) mkdir -p /dev/$name ;;
[1719]	274	M) mknod /dev/$name $arg1 && chmod 600 /dev/$name;;
	275	*) echo "udev-links.conf: unparseable line (%s %s %s)\n" "$type" "$name" "$arg1" ;;
[1718]	276	esac
	277	done
	278	}
	279
[1792]	280	create_dev_makedev() {
	281	if [ -e /sbin/MAKEDEV ]; then
	282	ln -sf /sbin/MAKEDEV /dev/MAKEDEV
	283	else
	284	ln -sf /bin/true /dev/MAKEDEV
	285	fi
	286	}
[1718]	287
[1716]	288	RunUdevd() {
[1718]	289	# Inspiration from Mandriva 2008.0 startup script
	290	echo "Preparing udev environment..."
	291	mv /dev /dev.static
	292	mkdir /dev
	293	mount -n -o size=5M,mode=0755 -t tmpfs none /dev
	294	make_extra_nodes
	295	mount -n -t devpts -o mode=620 none /dev/pts
	296	mount -n -t tmpfs none /dev/shm
[1789]	297	if [ -e /proc/sys/kernel/hotplug ]; then
	298	echo > /proc/sys/kernel/hotplug
	299	fi
[1734]	300	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	301	echo 0 > /proc/sys/kernel/printk
[2081]	302	# Many possibilities depending on udev versions
[1759]	303	if [ -x /sbin/startudev ]; then
	304	/sbin/startudev
	305	fi
[2081]	306	if [ -x /sbin/start_udev ]; then
	307	/sbin/start_udev
	308	fi
[1759]	309	# Depending on udevd version it gives back the hand or not :-(
[2673]	310	ps \| grep -v grep \|grep udevd 2> /dev/null 1> /dev/null
[2437]	311	if [ $? -ne 0 ]; then
	312	/sbin/udevd --daemon &
	313	echo "Waiting for udev to start..."
	314	sleep 5
	315	fi
[1792]	316	mkdir -p /dev/.udev/queue/
[1789]	317	if [ -x /sbin/udevtrigger ]; then
	318	/sbin/udevtrigger
	319	fi
[2442]	320	echo "Waiting for udev to discover..."
[1792]	321	create_dev_makedev
[2182]	322	# Newer version use udevadm for that
[2437]	323	if [ -x /sbin/udevsettle ]; then
[2442]	324	/sbin/udevsettle --timeout=10
[2437]	325	elif [ -x /sbin/udevadm ]; then
	326	/sbin/udevadm trigger
[2442]	327	/sbin/udevadm settle --timeout=10
[1816]	328	fi
[1824]	329	# It seems we need to have more static devs on some distro were
	330	# udev as some other requirements to be covered later on.
	331	# So in the mean time:
	332	for d in `ls /dev.static`; do
	333	if [ ! -e /dev/$d ]; then
	334	mv /dev.static/$d /dev
	335	fi
	336	done
[1816]	337	echo $PKLVL > /proc/sys/kernel/printk
[1716]	338	}
[1]	339
[1761]	340	RstHW() {
[1]	341
[1761]	342	# Restore the HW configuration if available (NOT by default)
	343	answer="NO"
[1]	344
[1815]	345	grep -q nohw /proc/cmdline
	346	if [ "$?" -eq 0 ]; then
	347	return
	348	fi
[1761]	349	if [ -x ./mindi-rsthw ]; then
	350	grep -q RESTORE /proc/cmdline
	351	if [ "$?" -ne 0 ]; then
[1815]	352	#clear
[1761]	353	echo "*********************************************************************"
	354	echo "Do you want to restore the HW configuration of the original machine ?"
	355	echo "(This may dammage your hardware so be sure to check twice before saying yes)"
	356	echo "*********************************************************************"
	357	echo "Please confirm by typing YES exactly as written here (NO by default)"
	358	echo -n "--> "
	359	read answer
	360	else
	361	answer="YES"
	362	fi
[1910]	363	if [ "$answer" = "YES" ] ; then
[1761]	364	./mindi-rsthw
	365	fi
	366	fi
	367	}
[1]	368
[1761]	369
[1]	370	#RunDevfsd() {
	371	# loc=`which devfsd 2> /dev/null`
	372	# if [ "$loc" != "" ] ; then
	373	# LogIt "Starting devfsd"
	374	# devfsd /dev &
	375	# sleep 5
	376	# fi
	377	#}
	378
	379
	380
[1787]	381	StartUSBKbd() {
	382	# Prepare minimal USB env in case we have USB kbd such as with iLO
	383	[ -d /proc/bus/usb ] && ! grep -q /proc/bus/usb /proc/mounts && mount -t usbfs none /proc/bus/usb
[1830]	384	echo "$DENY_MODS" \| grep -Eq 'uhcd_hci \|usbhid \|usbcore '
[1829]	385	if [ $? -eq 0 ]; then
	386	return
	387	fi
[1922]	388	modprobe -q uhcd_hci
	389	modprobe -q usbhid
[1787]	390	}
[1]	391
	392
[1787]	393
[1]	394	StartLvms() {
[2477]	395	if [ "`grep -i nolvm /proc/cmdline`" ]; then
	396	return;
	397	fi
[1747]	398	if [ -e "/tmp/i-want-my-lvm" ] ; then
	399	LogIt "Scanning LVM's..." 1
[739]	400	if which lvm ; then
[1922]	401	modprobe -q dm-mod
	402	modprobe -q dm_mod
[739]	403	lvm vgscan --mknodes
	404	else
	405	vgscan
	406	fi
[2533]	407
	408	# Exclude devices we may not want
	409	rm -f /tmp/restorevgs
[2564]	410	for d in $MINDI_EXCLUDE_DEVS ; do
[2580]	411	echo "LVM exclusion == $d"
[2533]	412	EXCLUDE_VGS=`grep " $d" /tmp/i-want-my-lvm \| grep vgcreate \| awk '{print $4}'`
	413	vg=`echo $EXCLUDE_VGS \| sed "s/ /\|/g"`
	414	if [ "$vg" != "" ]; then
	415	re=" $d\|$vg"
	416	else
	417	re=" $d"
	418	fi
	419	# Remove VGs from i-want-my-lvm
	420	grep -Ev "$re" /tmp/i-want-my-lvm > /tmp/i-want-my-lvm.new
	421	mv /tmp/i-want-my-lvm.new /tmp/i-want-my-lvm
	422	# Prepare script to restore the VG exluded here if needed
	423	for v in $EXCLUDE_VGS; do
	424	echo "vgcfgrestore $v" >> /tmp/restorevgs
	425	# Remove LVs from mountlist
	426	EXCLUDE_LVS=`grep " $v" /tmp/i-want-my-lvm \| grep lvcreate \| sed "s/^.-n \([^ ][^ ]\) .*$/$1/"`
	427	for l in $EXCLUDE_LVS; do
[2535]	428	# FIXME: Should search for all possible device names here
[2533]	429	grep -Ev "/dev/$v/$l" /tmp/mountlist.txt > /tmp/mountlist.txt.new
[2550]	430	grep -Ev "/dev/mapper/${v}-$l" /tmp/mountlist.txt.new > /tmp/mountlist.txt
[2533]	431	done
	432	done
	433	done
	434
[1747]	435	grep -E "^#.vgchange" /tmp/i-want-my-lvm \| sed "s/^#[ ]//" > /tmp/start-lvm
	436	chmod +x /tmp/start-lvm
	437	echo -en "Starting LVM's..."
	438	/tmp/start-lvm &
	439	for i in 1 2 3 4 5 ; do
[1410]	440	echo -en "."
	441	sleep 1
[1747]	442	done
	443	echo "Done."
	444	fi
[1]	445	# If necessary, cannibalize 'analyze-my-lvm'; copy some of its code here,
	446	# pipe vgscan's output, strip it, run 'vgchange' on its output, etc.etc.
[1747]	447	LogIt "LVM's have been started."
[1]	448	}
	449
[2177]	450	StartPowerPath() {
[1]	451
[2177]	452	# Taken from the init script of EMC PowerPath on RHEL
	453	if [ -f /etc/emcp_devicesDB.dat ]; then
	454	if [ -f /etc/emcp_devicesDB.idx ]; then
	455	/etc/opt/emcpower/emcpmgr map -p > /dev/null 2>&1
	456	fi
	457	fi
	458
	459	/sbin/powermt config > /dev/null 2>&1
	460	# Wait for udev to finish creating emcpower devices
	461	#
	462	pdfound=1
	463	for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
	464	pdfound=1
	465	for pd in `/bin/ls -d /sys/block/emcpower* 2> /dev/null`; do
	466	bpd=`basename $pd`
	467	if [ ! -e /dev/$bpd ]; then
	468	pdfound=0
	469	sleep 2
	470	break;
	471	fi
	472	done
	473	if [ "$pdfound" -eq 1 ]; then
	474	break
	475	fi
	476	done
	477	if [ "$pdfound" -eq 0 ]; then
	478	echo "Unable to start PowerPath"
	479	fi
	480
	481	/sbin/powermt load > /dev/null 2>&1
	482	/etc/opt/emcpower/emcpmgr map > /dev/null 2>&1
	483	/etc/opt/emcpower/powercf -C > /dev/null 2>&1
	484	if [ ! -e /etc/powermt.custom ]; then
	485	/sbin/powermt save > /dev/null 2>&1
	486	fi
	487	/sbin/powermt register > /dev/null 2>&1
	488	/sbin/powermig transition -startup -noprompt > /dev/null 2>&1
	489	}
	490
[2072]	491	StartMpath() {
	492	if [ "`grep -i nompath /proc/cmdline`" ]; then
	493	return;
	494	fi
[2353]	495	if [ "`grep mpath /tmp/mountlist.txt`" ]; then
	496	if [ -x /sbin/multipath ]; then
	497	echo "Starting Mpath..."
	498	mkdir -p /var/lib/multipath
	499	cat > /etc/multipath.conf << EOF
[2072]	500	defaults {
	501	user_friendly_names yes
	502	}
	503	EOF
[2353]	504	/sbin/multipath -v 0
	505	if [ -x /sbin/kpartx ]; then
	506	/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
	507	fi
[2072]	508	fi
	509	fi
	510	}
	511
[1]	512	StartRaids() {
[1747]	513	local raid_devices i
[1273]	514
[2353]	515	if [ "`grep -i noraid /proc/cmdline`" ]; then
	516	return;
	517	fi
	518
[1747]	519	raid_devices=`grep /dev/md /tmp/mountlist.txt \| cut -d' ' -f1`
[623]	520	if which raidstart > /dev/null 2> /dev/null ; then
[1747]	521	for i in $raid_devices ; do
	522	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	523	LogIt "$i is started already; no need to run 'raidstart $i'" 1
	524	else
[623]	525	LogIt "Running 'raidstart $i'" 1
	526	raidstart $i
[1747]	527	fi
	528	done
[623]	529	elif which mdrun > /dev/null 2> /dev/null ; then
[2353]	530	if [ "`grep -i nomd /proc/cmdline`" ]; then
	531	return;
	532	fi
[623]	533	LogIt "Running 'mdrun'" 1
	534	mdrun
[1273]	535	elif which mdadm > /dev/null 2> /dev/null ; then
[2353]	536	if [ "`grep -i nomd /proc/cmdline`" ]; then
	537	return;
	538	fi
[1273]	539	LogIt "Running 'mdadm'" 1
	540	for i in $raid_devices ; do
[1747]	541	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	542	LogIt "$i is started already; no need to run 'mdadm $i'" 1
	543	else
[1610]	544	if [ -f /etc/mdadm.conf ] ; then
	545	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm.conf" 1
	546	mdadm -A $i -c /etc/mdadm.conf
	547	elif [ -f /etc/mdadm/mdadm.conf ] ; then
	548	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm/mdadm.conf" 1
	549	mdadm -A $i -c /etc/mdadm/mdadm.conf
	550	else
	551	LogIt "Running 'mdadm $i'" 1
	552	mdadm -Ac partitions -m dev $i
	553	fi
[1747]	554	fi
	555	done
[2075]	556	elif which dmraid > /dev/null 2> /dev/null ; then
[2072]	557	if [ "`grep -i nodmraid /proc/cmdline`" ]; then
	558	return;
	559	fi
	560	for x in $(/sbin/dmraid -ay -i -p -t 2>/dev/null \| grep -E -iv "^no " \|awk -F ':' '{ print $1 }') ; do
	561	echo "Please send the result of /sbin/dmraid -ay -i -p -t to the devteam !!!"
	562	return
	563	#dmname=$(resolve_dm_name $x)
	564	#[ -z "$dmname" ] && continue
	565	#/sbin/dmraid -ay -i -p "$dmname" >/dev/null 2>&1
	566	#/sbin/kpartx -a -p p "/dev/mapper/$dmname"
	567	done
[623]	568	else
	569	LogIt "Warning: Neither 'raidstart' nor 'mdrun''found. RAID devices may not have started." 1
	570	fi
	571
[1]	572	}
	573
	574
	575	TryAgainToFindCD() {
[1747]	576	local res
	577	mount \| grep /mnt/cdrom && return 0
[1983]	578	[ "`grep "backup_media_type" /tmp/mondo-restore.cfg 2> /dev/null \| grep "cdstream"`" ] && return
[1747]	579	LogIt "Trying to mount CD-ROM a 2nd time..."
	580	find-and-mount-cdrom --second-try
	581	res=$?
	582	if [ "$res" -eq "0" ] ; then
	583	CD_MOUNTED_OK=yes
	584	LogIt "CD-ROM drive mounted successfully." 1
	585	else
	586	LogIt "I still cannot find or mount the CD-ROM drive, by the way."
	587	fi
[1]	588	}
	589
	590
	591
	592	UseTmpfs()
	593	{
[1747]	594	local mount_cmd
	595	echo -en "Mounting /tmp/tmpfs..."
	596	mkdir -p /tmp/tmpfs
[1]	597	# For technical reasons, some sets are as large as 16MB.
	598	# I am allowing 32MB because selective restore occupies a lot of space.
[2212]	599	for size in 128m 64m 48m 40m 32m ; do
[1747]	600	mount_cmd="mount /dev/shm -t tmpfs -o size=$size" ; # was 34m until 04/2003
	601	LogIt "Trying '$mount_cmd'"
	602	$mount_cmd /tmp/tmpfs 2>> $LOGFILE
	603	res=$?
	604	[ "$res" -eq "0" ] && break
	605	done
	606	if [ "$res" -ne "0" ] ; then
	607	LogIt "Failed. I could not run '$mount_cmd /tmp/tmpfs'. Your kernel is BROKEN or you do not have enough RAM." 1
	608	umount /tmp/tmpfs > /dev/null 2> /dev/null
	609	rmdir /tmp/tmpfs
	610	ln -sf /mnt/RESTORING/tmp /tmp/tmpfs; # used by mondo-restore
	611	LogIt "Failed to mount /tmp/tmpfs; using ugly softlink instead"
	612	else
	613	LogIt "Great. Pivot succeeded w/ size=$size" 1
	614	echo -en "Pivoting /tmp..."
	615	umount /tmp/tmpfs
	616	mkdir -p /tmp.old
[1752]	617	mv /tmp/* /tmp.old/
	618	# Try to Deal with a busybox bug on inexistant links
[1747]	619	cp /tmp/* /tmp.old/
	620	rm -f /tmp/*
	621	$mount_cmd /tmp
[1752]	622	mv /tmp.old/* /tmp/
	623	# Try to Deal with a busybox bug on inexistant links
[1747]	624	cp /tmp.old/* /tmp/
	625	rm -rf /tmp.old
	626	mkdir -p /tmp/tmpfs
	627	mkdir -p $GROOVY
[1]	628	echo "Done."
	629	LogIt "Successfully mounted dynamic /tmp ramdisk"
	630	# mkdir -p /tmp/tmpfs/var
	631	# mv -f /var/log /tmp/tmpfs/var/log
	632	# ln -sf /tmp/tmpfs/var/log /var/log
[1747]	633	fi
[1]	634	}
	635
	636
	637	WelcomeMessage()
	638	{
[1747]	639	echo "********************************************************************"
	640	echo "MINDI-LINUX by Mondo Dev Team - web site: http://www.mondorescue.org"
	641	echo "Boot disk based on AlfaLinux & Trinux. BusyBox by Erik Andersen."
[1]	642	which petris > /dev/null 2> /dev/null && echo "Petris was written by Peter Seidler <p.seidler@mail1.stofanet.dk>."
[1747]	643	echo "Executables and source code are covered by the GNU GPL. No warranty."
	644	echo "running on $ARCH"
	645	echo "********************************************************************"
[1]	646	}
	647
	648
	649	EnableCcissIfAppropriate() {
[1747]	650	local i fname
	651	for i in 0 1 2 3 ; do
[1410]	652	fname="/proc/driver/cciss/cciss$i"
	653	if [ -e "$fname" ] ; then
	654	LogIt "Engaging $fname"
	655	echo "engage scsi" > $fname
	656	LogIt "...result=$?"
	657	fi
[1747]	658	done
[1]	659	}
	660
[1802]	661	ModprobeAllModules() {
[1]	662
[2562]	663	lismod=`find /lib/modules -name '\.ko' -o -name '\.o'`
	664	# loading forced modules first
	665	for m in $lismod; do
[1927]	666	k=`basename $m \| sed 's/\.ko.*$//'`
	667	j=`basename $k \| sed 's/\.o.*$//'`
[2562]	668	echo "$FORCE_MODS" \| grep -q "$j "
	669	if [ $? -eq 0 ]; then
	670	echo "Forcing first $j..."
	671	modprobe -q $j
	672	fi
	673	done
	674	for m in $lismod; do
	675	k=`basename $m \| sed 's/\.ko.*$//'`
	676	j=`basename $k \| sed 's/\.o.*$//'`
[1830]	677	echo "$DENY_MODS" \| grep -q "$j "
[1829]	678	if [ $? -eq 0 ]; then
[1830]	679	echo "Denying $j..."
[1829]	680	continue
	681	fi
[2562]	682	echo "$FORCE_MODS" \| grep -q "$j "
	683	if [ $? -eq 0 ]; then
	684	continue
	685	fi
[1829]	686	echo "Probing $j..."
[1815]	687	modprobe -q $j
[1802]	688	done
	689	}
	690
[2755]	691	UdevadmTrigger() {
	692	if [ `/sbin/udevadm --version` -ge 146 ]; then
	693	/sbin/udevadm triger --type=failed
	694	else
	695	/sbin/udevadm trigger --retry-failed
	696	fi
	697	}
	698
[287]	699	ExtractDataDisksAndLoadModules() {
	700	echo "Installing additional tools ..."
	701	install-additional-tools
[1800]	702	# Keep the kernel silent again
	703	PKLVL=`cut -f1 /proc/sys/kernel/printk`
[1802]	704	echo 0 > /proc/sys/kernel/printk
[1922]	705	ModprobeAllModules
[1800]	706	echo $PKLVL > /proc/sys/kernel/printk
[2081]	707
	708	# Retry failed udev events now that local filesystems are mounted read-write
	709	# (useful for rules creating network ifcfg files)
	710	if [ -e "/tmp/USE-UDEV" ] ; then
[2755]	711	UdevadmTrigger
[2081]	712	fi
[287]	713	}
[1]	714
	715	# ------------------------ main -----------------------
	716
[1698]	717	MINDI_VER=PBVER
	718	MINDI_REV=PBREV
[1]	719	trap CaughtSoftReset SIGTERM
[1643]	720	LOGFILE=/var/log/mondorestore.log
[1236]	721	PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/mondo:/usr/games
[1]	722	GROOVY=/tmp/groovy-stuff
	723	USER=root
[2163]	724	ARCH=`uname -m`
[1]	725
[2163]	726	export PATH GROOVY USER LOGFILE ARCH
	727
[1716]	728	echo "Welcome to init (from mindi ${MINDI_VER}-r${MINDI_REV})"
[898]	729
[1]	730	mount -o remount rw /
	731	[ ! "$GROOVY" ] && Die "I'm not groovy!"
[1885]	732	for i in $GROOVY /mnt/cdrom /mnt/isodir /var/local/petris /tmp/isodir; do
[1747]	733	mkdir -p $i
[1]	734	done
	735	#/bin/update
	736	mount /proc/ /proc -v -t proc
	737	mkdir /sys 2> /dev/null
	738	mount /sys/ /sys -v -t sysfs 2>> $LOGFILE
[1824]	739	# For ESX 3
	740	[ -d /proc/vmware ] && ! grep -q /vmfs /proc/mounts && mount -t vmfs /vmfs /vmfs
[1]	741	rm -f /foozero
	742
[1829]	743	if [ "`grep -i denymods /proc/cmdline`" ]; then
	744	export DENY_MODS="`cat /proc/cmdline \| sed 's~.denymods=\"\(.\)\".*~\1~'` mondonone"
[1830]	745	else
	746	export DENY_MODS=" "
[1829]	747	fi
[1983]	748	if [ "`grep -i 'obdr ' /tmp/mondo-restore.cfg 2> /dev/null`" ]; then
[1958]	749	# Do not try to load usb storage when dealing with OBDR it makes the modprobe hang :-(
[1960]	750	export DENY_MODS="usb-storage $DENY_MODS"
[1958]	751	fi
[1829]	752	if [ "`grep -i forcemods /proc/cmdline`" ]; then
	753	export FORCE_MODS="`cat /proc/cmdline \| sed 's~.forcemods=\"\(.\)\".*~\1~'` mondonone"
[1830]	754	else
	755	export FORCE_MODS=" "
[1829]	756	fi
[2533]	757	if [ "`grep -i excludedevs /proc/cmdline`" ]; then
[2564]	758	export MINDI_EXCLUDE_DEVS="`cat /proc/cmdline \| sed 's~.excludedevs=\"\(.\)\".*~\1~'` mondonone"
[2580]	759	for d in $MINDI_EXCLUDE_DEVS ; do
	760	echo "Mountlist exclusion == $d"
	761	perl -i -ne 'print $_ unless m~$d~' /tmp/mountlist.txt
	762	done
[2533]	763	else
[2564]	764	export MINDI_EXCLUDE_DEVS=" "
[2533]	765	fi
[1829]	766
[1826]	767	echo "Activating a potential USB keyboard/mouse"
[1787]	768	StartUSBKbd
	769
[1720]	770	if [ -f /proc/sys/kernel/exec-shield ]; then
	771	echo 0 > /proc/sys/kernel/exec-shield 2>> /dev/null
	772	fi
[1]	773
[1729]	774	if [ -f /proc/modules ]; then
	775	echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
	776	fi
	777
[1716]	778	if [ -e "/tmp/USE-UDEV" ] ; then
[1747]	779	RunUdevd
[1716]	780	fi
[1798]	781	ExtractDevTarballs
[1]	782	LaunchTerminals
[1718]	783
[1789]	784	# Keeping kernel silent for module insertion
	785	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	786	echo 0 > /proc/sys/kernel/printk
[1922]	787	ModprobeAllModules
[1789]	788	echo $PKLVL > /proc/sys/kernel/printk
[1718]	789
[1]	790	EnableCcissIfAppropriate
	791	#-------------------------------
	792	#WHOLIVESINAPINEAPPLEUNDERTHESEA#;# --- don't touch this :)
	793	#-------------------------------
	794	UseTmpfs
	795	if [ ! -e "/tmp/mondo-restore.cfg" ] ; then
[1747]	796	LogIt "Warning - /tmp/mondo-restore.cfg not found"
[1]	797	fi
[2182]	798	if [ "`grep -i pxe /proc/cmdline`" ] \|\| [ "`grep -i net /proc/cmdline`" ]; then
[2380]	799	# We need to get here exported variables from start-netfs
	800	. /sbin/start-netfs
[2182]	801	fi
[1]	802
[1983]	803	if [ "`grep -i 'obdr ' /tmp/mondo-restore.cfg 2>/dev/null`" ] \|\| [ "`grep -i ' udev' /tmp/mondo-restore.cfg 2>/dev/null`" ]; then
[1747]	804	HandleTape
[287]	805	ExtractDataDisksAndLoadModules
[737]	806	elif [ "`grep -i pxe /proc/cmdline`" ]; then
[287]	807	# Simulate a local CD
	808	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	809	CD_MOUNTED_OK=yes
[287]	810	ExtractDataDisksAndLoadModules
[2182]	811	# Fake the conf file to force it to NFS mode, even if we made originally a CD (mandatory for mondorestore to work correctly)
[2380]	812	sed -i "s/backup-media-type.*/backup-media-type netfs/" /tmp/mondo-restore.cfg
[1983]	813	elif [ "`grep -i usb= /proc/cmdline`" ] \|\| [ "`grep -i usb /tmp/mondo-restore.cfg 2>/dev/null \| grep media-type`" ]; then
[1747]	814	. /sbin/start-usb
[1698]	815
	816	# Simulate a local CD
	817	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	818	CD_MOUNTED_OK=yes
[1698]	819	ExtractDataDisksAndLoadModules
[1]	820	else
[1885]	821	HandleCDROM
[287]	822	ExtractDataDisksAndLoadModules
[2380]	823	# We need to get here exported variables from start-netfs
	824	. /sbin/start-netfs
[1]	825	fi
	826	res=$?
	827	ConfigureLoggingDaemons
	828	if [ -e "/tmp/USE-DEVFS" ] ; then
[1747]	829	umount /mnt/cdrom 2> /dev/null
	830	mv /dev/cdrom /cdrom.lnk 2> /dev/null
	831	CD_MOUNTED_OK=""
	832	RunDevfsd
[1]	833	fi
[1813]	834	LoadKeymap
	835	WelcomeMessage
	836	RstHW
[2559]	837	echo "Starting potential Raid/Multipath ..."
[2580]	838	[ -e "/tmp/mountlist.txt" ] && cp -f /tmp/mountlist.txt /tmp/mountlist.original
[1]	839	PauseForRaids
	840	StartRaids
[2072]	841	StartMpath
[1]	842	StartLvms
	843	CopyBootDevEntry
	844	mkdir -p /tmp/tmpfs
	845	sleep 2
	846	#clear
[241]	847	if [ -e "/dev/md0" ] && [ ! -e "/dev/md/0" ] && [ "`grep /dev/md/ /tmp/mountlist.txt`" != "" ] ; then
[1747]	848	LogIt "Creating /dev/md/* softlinks just in case." 1
	849	mkdir -p /dev/md
	850	cp -af /dev/md0 /dev/md/0 2> /dev/null
	851	cp -af /dev/md1 /dev/md/1 2> /dev/null
	852	cp -af /dev/md2 /dev/md/2 2> /dev/null
[1]	853	fi
	854
[241]	855	if ! [ "`grep -i "pxe" /proc/cmdline`" ] ; then
[1]	856	res="`cat /mnt/cdrom/archives/THIS-CD-NUMBER 2> /dev/null`"
	857	[ "$res" != "1" ] && [ "$res" != "" ] && Die "This is CD #$res in the series. Please insert CD #1."
	858	[ -e "/cdrom.lnk" ] && mv -f /cdrom.lnk /dev/cdrom && mount /dev/cdrom /mnt/cdrom && CD_MOUNTED_OK=yes
	859	[ "$CD_MOUNTED_OK" != "yes" ] && TryAgainToFindCD
	860	#mount \| grep cdrom > /dev/null 2> /dev/null \|\| mount /dev/cdrom /mnt/cdrom >> $LOGFILE 2>> $LOGFILE
	861	fi
	862	hack-cfg-if-necessary \|\| LogIt "Cannot find hack-cfg-if-necessary"
	863
[1403]	864	# Log some useful info
[1837]	865	LogIt "init (from mindi v$MINDI_VER-r${MINDI_REV})"
[1413]	866	LogIt "/proc/cmdline is:"
[2346]	867	LogIt "----------"
[1403]	868	cat /proc/cmdline >> $LOGFILE
[2346]	869	LogIt "----------"
[1413]	870	LogIt "df result:"
	871	LogIt "----------"
[1403]	872	df >> $LOGFILE
[1413]	873	LogIt "-------------"
	874	LogIt "mount result:"
	875	LogIt "-------------"
[1403]	876	mount >> $LOGFILE
[1413]	877	LogIt "-------------"
	878	LogIt "lsmod result:"
	879	LogIt "-------------"
[1403]	880	lsmod >> $LOGFILE
[1413]	881	LogIt "-------------"
[1476]	882	LogIt "dmesg result:"
	883	LogIt "-------------"
	884	dmesg >> $LOGFILE
[2015]	885	LogIt "-------------"
	886	LogIt "/proc/swaps:" >> $LOGFILE
	887	LogIt "-------------"
	888	cat /proc/swaps >> $LOGFILE
	889	LogIt "-------------"
	890	LogIt "/proc/filesystems:" >> $LOGFILE
	891	LogIt "-------------"
	892	cat /proc/filesystems >> $LOGFILE
	893	LogIt "-------------"
	894	LogIt "/proc/partitions:" >> $LOGFILE
	895	LogIt "-------------"
	896	cat /proc/partitions >> $LOGFILE
[2346]	897	LogIt "-------------"
	898	LogIt "fdisk result:" >> $LOGFILE
	899	LogIt "-------------"
	900	fdisk -l >> $LOGFILE
[2768]	901	LogIt "-------------"
	902	LogIt "/tmp/mondo-restore.cfg result:" >> $LOGFILE
	903	LogIt "-------------"
	904	cat /tmp/mondo-restore.cfg >> $LOGFILE
[1403]	905
[1983]	906	ide-opt
[1]	907
	908	#ctrlaltdel soft
	909	for i in null stdout stdin stderr ; do
[1747]	910	cp -af /dev/$i /tmp
[1]	911	done
[2081]	912	# Not sure it's still needed, but shouldn't hurt
	913	if [ -e "/tmp/USE-UDEV" ] ; then
	914	if [ -x /sbin/udevadm ]; then
[2755]	915	UdevadmTrigger
[2081]	916	fi
	917	fi
[1]	918	if grep "backup-media-type" /tmp/mondo-restore.cfg > /dev/null 2> /dev/null ; then
[1747]	919	LogIt "backup-media-type is specified in config file - great."
[2197]	920	LogIt "Calling post-init"
[2380]	921	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	922	if [ "`echo $pre \| grep -E '^/tmp/isodir'`" ]; then
[2533]	923	pre=`echo $pre \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2255]	924	fi
	925	if [ -x $pre ]; then
	926	echo "Executing preliminary script $pre"
	927	LogIt "Executing preliminary script $pre"
	928	$pre
	929	fi
[1747]	930	post-init
[1]	931	else
[1747]	932	LogIt "backup-media-type is not specified in config file."
[1885]	933	LogIt "I think this media has no archives on it."
[1]	934	fi
[2255]	935	if [ "`grep -i "post=" /proc/cmdline`" ] ; then
[2249]	936	for i in `cat /proc/cmdline` ; do
[2255]	937	echo $i \| grep -qi post= && post=`echo $i \| cut -d= -f2`
[2249]	938	done
[2380]	939	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	940	if [ "`echo $post \| grep -E '^/tmp/isodir'`" ]; then
	941	post=`echo $post \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2253]	942	fi
[2581]	943	if [ -r $post ]; then
[2255]	944	echo "Executing final script $post"
	945	LogIt "Executing final script $post"
	946	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	947	mount-me
	948	fi
[2581]	949	chmod 755 $post
[2255]	950	$post
	951	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	952	unmount-me
	953	fi
[2249]	954	fi
	955	fi
[1612]	956	if grep "RESTORE" /proc/cmdline > /dev/null 2> /dev/null ; then
	957	echo "Rebooting in 10 seconds automatically as per reboot order"
	958	echo -en "Press ^C to interrupt if you have to ..."
	959	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	960	sleep 1
	961	echo -en "."
	962	done
	963	echo "Boom."
	964	sleep 1
	965	else
	966	echo -en "Type 'exit' to reboot the PC\n"
	967	umount /mnt/cdrom 2> /dev/null
	968	mount / -o rw,remount > /dev/null 2> /dev/null
	969	LogIt "Launching Shell"
	970	sh
	971	fi
[1]	972	CaughtSoftReset
	973	# reboot

Note: See TracBrowser for help on using the repository browser.

Download in other formats: