source: branches/2.2.9/mindi-busybox/util-linux/Config.in @ 2725

Last change on this file since 2725 was 2725, checked in by bruno, 8 years ago
  • Update mindi-busybox to 1.18.3 to avoid problems with the tar command which is now failing on recent versions with busybox 1.7.3
File size: 25.9 KB
Line 
1# DO NOT EDIT. This file is generated from Config.src
2#
3# For a description of the syntax of this configuration file,
4# see scripts/kbuild/config-language.txt.
5#
6
7menu "Linux System Utilities"
8
9config BLOCKDEV
10    bool "blockdev"
11    default y
12    help
13      Performs some ioctls with block devices.
14config REV
15    bool "rev"
16    default y
17    help
18      Reverse lines of a file or files.
19
20config ACPID
21    bool "acpid"
22    default y
23    depends on PLATFORM_LINUX
24    help
25      acpid listens to ACPI events coming either in textual form from
26      /proc/acpi/event (though it is marked deprecated it is still widely
27      used and _is_ a standard) or in binary form from specified evdevs
28      (just use /dev/input/event*).
29
30      It parses the event to retrieve ACTION and a possible PARAMETER.
31      It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
32      (if the resulting path is a directory) or directly as an executable.
33
34      N.B. acpid relies on run-parts so have the latter installed.
35
36config FEATURE_ACPID_COMPAT
37    bool "Accept and ignore redundant options"
38    default y
39    depends on ACPID
40    help
41      Accept and ignore compatibility options -g -m -s -S -v.
42
43config BLKID
44    bool "blkid"
45    default y
46    depends on PLATFORM_LINUX
47    select VOLUMEID
48    help
49      Lists labels and UUIDs of all filesystems.
50      WARNING:
51      With all submodules selected, it will add ~8k to busybox.
52
53config DMESG
54    bool "dmesg"
55    default y
56    depends on PLATFORM_LINUX
57    help
58      dmesg is used to examine or control the kernel ring buffer. When the
59      Linux kernel prints messages to the system log, they are stored in
60      the kernel ring buffer. You can use dmesg to print the kernel's ring
61      buffer, clear the kernel ring buffer, change the size of the kernel
62      ring buffer, and change the priority level at which kernel messages
63      are also logged to the system console. Enable this option if you
64      wish to enable the 'dmesg' utility.
65
66config FEATURE_DMESG_PRETTY
67    bool "Pretty dmesg output"
68    default y
69    depends on DMESG
70    help
71      If you wish to scrub the syslog level from the output, say 'Y' here.
72      The syslog level is a string prefixed to every line with the form
73      "<#>".
74
75      With this option you will see:
76        # dmesg
77        Linux version 2.6.17.4 .....
78        BIOS-provided physical RAM map:
79         BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
80
81      Without this option you will see:
82        # dmesg
83        <5>Linux version 2.6.17.4 .....
84        <6>BIOS-provided physical RAM map:
85        <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
86
87config FBSET
88    bool "fbset"
89    default y
90    depends on PLATFORM_LINUX
91    help
92      fbset is used to show or change the settings of a Linux frame buffer
93      device. The frame buffer device provides a simple and unique
94      interface to access a graphics display. Enable this option
95      if you wish to enable the 'fbset' utility.
96
97config FEATURE_FBSET_FANCY
98    bool "Turn on extra fbset options"
99    default y
100    depends on FBSET
101    help
102      This option enables extended fbset options, allowing one to set the
103      framebuffer size, color depth, etc. interface to access a graphics
104      display. Enable this option if you wish to enable extended fbset
105      options.
106
107config FEATURE_FBSET_READMODE
108    bool "Turn on fbset readmode support"
109    default y
110    depends on FBSET
111    help
112      This option allows fbset to read the video mode database stored by
113      default as /etc/fb.modes, which can be used to set frame buffer
114      device to pre-defined video modes.
115
116config FDFLUSH
117    bool "fdflush"
118    default y
119    depends on PLATFORM_LINUX
120    help
121      fdflush is only needed when changing media on slightly-broken
122      removable media drives. It is used to make Linux believe that a
123      hardware disk-change switch has been actuated, which causes Linux to
124      forget anything it has cached from the previous media. If you have
125      such a slightly-broken drive, you will need to run fdflush every time
126      you change a disk. Most people have working hardware and can safely
127      leave this disabled.
128
129config FDFORMAT
130    bool "fdformat"
131    default y
132    depends on PLATFORM_LINUX
133    help
134      fdformat is used to low-level format a floppy disk.
135
136config FDISK
137    bool "fdisk"
138    default y
139    depends on PLATFORM_LINUX
140    help
141      The fdisk utility is used to divide hard disks into one or more
142      logical disks, which are generally called partitions. This utility
143      can be used to list and edit the set of partitions or BSD style
144      'disk slices' that are defined on a hard drive.
145
146config FDISK_SUPPORT_LARGE_DISKS
147    bool "Support over 4GB disks"
148    default y
149    depends on FDISK
150    help
151      Enable this option to support large disks > 4GB.
152
153config FEATURE_FDISK_WRITABLE
154    bool "Write support"
155    default y
156    depends on FDISK
157    help
158      Enabling this option allows you to create or change a partition table
159      and write those changes out to disk. If you leave this option
160      disabled, you will only be able to view the partition table.
161
162config FEATURE_AIX_LABEL
163    bool "Support AIX disklabels"
164    default n
165    depends on FDISK && FEATURE_FDISK_WRITABLE
166    help
167      Enabling this option allows you to create or change AIX disklabels.
168      Most people can safely leave this option disabled.
169
170config FEATURE_SGI_LABEL
171    bool "Support SGI disklabels"
172    default n
173    depends on FDISK && FEATURE_FDISK_WRITABLE
174    help
175      Enabling this option allows you to create or change SGI disklabels.
176      Most people can safely leave this option disabled.
177
178config FEATURE_SUN_LABEL
179    bool "Support SUN disklabels"
180    default n
181    depends on FDISK && FEATURE_FDISK_WRITABLE
182    help
183      Enabling this option allows you to create or change SUN disklabels.
184      Most people can safely leave this option disabled.
185
186config FEATURE_OSF_LABEL
187    bool "Support BSD disklabels"
188    default n
189    depends on FDISK && FEATURE_FDISK_WRITABLE
190    help
191      Enabling this option allows you to create or change BSD disklabels
192      and define and edit BSD disk slices.
193
194config FEATURE_GPT_LABEL
195    bool "Support GPT disklabels"
196    default n
197    depends on FDISK && FEATURE_FDISK_WRITABLE
198    help
199      Enabling this option allows you to view GUID Partition Table
200      disklabels.
201
202config FEATURE_FDISK_ADVANCED
203    bool "Support expert mode"
204    default y
205    depends on FDISK && FEATURE_FDISK_WRITABLE
206    help
207      Enabling this option allows you to do terribly unsafe things like
208      define arbitrary drive geometry, move the beginning of data in a
209      partition, and similarly evil things. Unless you have a very good
210      reason you would be wise to leave this disabled.
211
212config FINDFS
213    bool "findfs"
214    default y
215    depends on PLATFORM_LINUX
216    select VOLUMEID
217    help
218      Prints the name of a filesystem with given label or UUID.
219      WARNING:
220      With all submodules selected, it will add ~8k to busybox.
221
222config FLOCK
223    bool "flock"
224    default y
225    help
226      Manage locks from shell scripts
227
228config FREERAMDISK
229    bool "freeramdisk"
230    default y
231    depends on PLATFORM_LINUX
232    help
233      Linux allows you to create ramdisks. This utility allows you to
234      delete them and completely free all memory that was used for the
235      ramdisk. For example, if you boot Linux into a ramdisk and later
236      pivot_root, you may want to free the memory that is allocated to the
237      ramdisk. If you have no use for freeing memory from a ramdisk, leave
238      this disabled.
239
240config FSCK_MINIX
241    bool "fsck_minix"
242    default y
243    help
244      The minix filesystem is a nice, small, compact, read-write filesystem
245      with little overhead. It is not a journaling filesystem however and
246      can experience corruption if it is not properly unmounted or if the
247      power goes off in the middle of a write. This utility allows you to
248      check for and attempt to repair any corruption that occurs to a minix
249      filesystem.
250
251config MKFS_EXT2
252    bool "mkfs_ext2"
253    default y
254    depends on PLATFORM_LINUX
255    help
256      Utility to create EXT2 filesystems.
257
258config MKFS_MINIX
259    bool "mkfs_minix"
260    default y
261    depends on PLATFORM_LINUX
262    help
263      The minix filesystem is a nice, small, compact, read-write filesystem
264      with little overhead. If you wish to be able to create minix
265      filesystems this utility will do the job for you.
266
267config FEATURE_MINIX2
268    bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
269    default y
270    depends on FSCK_MINIX || MKFS_MINIX
271    help
272      If you wish to be able to create version 2 minix filesystems, enable
273      this. If you enabled 'mkfs_minix' then you almost certainly want to
274      be using the version 2 filesystem support.
275
276config MKFS_REISER
277    bool "mkfs_reiser"
278    default n
279    depends on PLATFORM_LINUX
280    help
281      Utility to create ReiserFS filesystems.
282      Note: this applet needs a lot of testing and polishing.
283
284config MKFS_VFAT
285    bool "mkfs_vfat"
286    default y
287    depends on PLATFORM_LINUX
288    help
289      Utility to create FAT32 filesystems.
290
291config GETOPT
292    bool "getopt"
293    default y
294    help
295      The getopt utility is used to break up (parse) options in command
296      lines to make it easy to write complex shell scripts that also check
297      for legal (and illegal) options. If you want to write horribly
298      complex shell scripts, or use some horribly complex shell script
299      written by others, this utility may be for you. Most people will
300      wisely leave this disabled.
301
302config FEATURE_GETOPT_LONG
303    bool "Support option -l"
304    default y if LONG_OPTS
305    depends on GETOPT
306    help
307      Enable support for long options (option -l).
308
309config HEXDUMP
310    bool "hexdump"
311    default y
312    help
313      The hexdump utility is used to display binary data in a readable
314      way that is comparable to the output from most hex editors.
315
316config FEATURE_HEXDUMP_REVERSE
317    bool "Support -R, reverse of 'hexdump -Cv'"
318    default y
319    depends on HEXDUMP
320    help
321      The hexdump utility is used to display binary data in an ascii
322      readable way. This option creates binary data from an ascii input.
323      NB: this option is non-standard. It's unwise to use it in scripts
324      aimed to be portable.
325
326config HD
327    bool "hd"
328    default y
329    depends on HEXDUMP
330    help
331      hd is an alias to hexdump -C.
332
333config HWCLOCK
334    bool "hwclock"
335    default y
336    depends on PLATFORM_LINUX
337    help
338      The hwclock utility is used to read and set the hardware clock
339      on a system. This is primarily used to set the current time on
340      shutdown in the hardware clock, so the hardware will keep the
341      correct time when Linux is _not_ running.
342
343config FEATURE_HWCLOCK_LONG_OPTIONS
344    bool "Support long options (--hctosys,...)"
345    default y
346    depends on HWCLOCK && LONG_OPTS
347    help
348      By default, the hwclock utility only uses short options. If you
349      are overly fond of its long options, such as --hctosys, --utc, etc)
350      then enable this option.
351
352config FEATURE_HWCLOCK_ADJTIME_FHS
353    bool "Use FHS /var/lib/hwclock/adjtime"
354    default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
355    depends on HWCLOCK
356    help
357      Starting with FHS 2.3, the adjtime state file is supposed to exist
358      at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
359      to use the FHS behavior, answer Y here, otherwise answer N for the
360      classic /etc/adjtime path.
361
362      pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
363
364config IPCRM
365    bool "ipcrm"
366    default y
367    help
368      The ipcrm utility allows the removal of System V interprocess
369      communication (IPC) objects and the associated data structures
370      from the system.
371
372config IPCS
373    bool "ipcs"
374    default y
375    depends on PLATFORM_LINUX
376    help
377      The ipcs utility is used to provide information on the currently
378      allocated System V interprocess (IPC) objects in the system.
379
380config LOSETUP
381    bool "losetup"
382    default y
383    depends on PLATFORM_LINUX
384    help
385      losetup is used to associate or detach a loop device with a regular
386      file or block device, and to query the status of a loop device. This
387      version does not currently support enabling data encryption.
388
389config LSPCI
390    bool "lspci"
391    default y
392    #depends on PLATFORM_LINUX
393    help
394      lspci is a utility for displaying information about PCI buses in the
395      system and devices connected to them.
396
397      This version uses sysfs (/sys/bus/pci/devices) only.
398
399config LSUSB
400    bool "lsusb"
401    default y
402    #depends on PLATFORM_LINUX
403    help
404      lsusb is a utility for displaying information about USB buses in the
405      system and devices connected to them.
406
407      This version uses sysfs (/sys/bus/usb/devices) only.
408
409config MDEV
410    bool "mdev"
411    default y
412    depends on PLATFORM_LINUX
413    help
414      mdev is a mini-udev implementation for dynamically creating device
415      nodes in the /dev directory.
416
417      For more information, please see docs/mdev.txt
418
419config FEATURE_MDEV_CONF
420    bool "Support /etc/mdev.conf"
421    default y
422    depends on MDEV
423    help
424      Add support for the mdev config file to control ownership and
425      permissions of the device nodes.
426
427      For more information, please see docs/mdev.txt
428
429config FEATURE_MDEV_RENAME
430    bool "Support subdirs/symlinks"
431    default y
432    depends on FEATURE_MDEV_CONF
433    help
434      Add support for renaming devices and creating symlinks.
435
436      For more information, please see docs/mdev.txt
437
438config FEATURE_MDEV_RENAME_REGEXP
439    bool "Support regular expressions substitutions when renaming device"
440    default y
441    depends on FEATURE_MDEV_RENAME
442    help
443      Add support for regular expressions substitutions when renaming
444      device.
445
446config FEATURE_MDEV_EXEC
447    bool "Support command execution at device addition/removal"
448    default y
449    depends on FEATURE_MDEV_CONF
450    help
451      This adds support for an optional field to /etc/mdev.conf for
452      executing commands when devices are created/removed.
453
454      For more information, please see docs/mdev.txt
455
456config FEATURE_MDEV_LOAD_FIRMWARE
457    bool "Support loading of firmwares"
458    default y
459    depends on MDEV
460    help
461      Some devices need to load firmware before they can be usable.
462
463      These devices will request userspace look up the files in
464      /lib/firmware/ and if it exists, send it to the kernel for
465      loading into the hardware.
466
467config MKSWAP
468    bool "mkswap"
469    default y
470    help
471      The mkswap utility is used to configure a file or disk partition as
472      Linux swap space. This allows Linux to use the entire file or
473      partition as if it were additional RAM, which can greatly increase
474      the capability of low-memory machines. This additional memory is
475      much slower than real RAM, but can be very helpful at preventing your
476      applications being killed by the Linux out of memory (OOM) killer.
477      Once you have created swap space using 'mkswap' you need to enable
478      the swap space using the 'swapon' utility.
479
480config FEATURE_MKSWAP_UUID
481    bool "UUID support"
482    default y
483    depends on MKSWAP
484    help
485      Generate swap spaces with universally unique identifiers.
486
487config MORE
488    bool "more"
489    default y
490    help
491      more is a simple utility which allows you to read text one screen
492      sized page at a time. If you want to read text that is larger than
493      the screen, and you are using anything faster than a 300 baud modem,
494      you will probably find this utility very helpful. If you don't have
495      any need to reading text files, you can leave this disabled.
496
497config MOUNT
498    bool "mount"
499    default y
500    depends on PLATFORM_LINUX
501    help
502      All files and filesystems in Unix are arranged into one big directory
503      tree. The 'mount' utility is used to graft a filesystem onto a
504      particular part of the tree. A filesystem can either live on a block
505      device, or it can be accessible over the network, as is the case with
506      NFS filesystems. Most people using BusyBox will also want to enable
507      the 'mount' utility.
508
509config FEATURE_MOUNT_FAKE
510    bool "Support option -f"
511    default y
512    depends on MOUNT
513    help
514      Enable support for faking a file system mount.
515
516config FEATURE_MOUNT_VERBOSE
517    bool "Support option -v"
518    default y
519    depends on MOUNT
520    help
521      Enable multi-level -v[vv...] verbose messages. Useful if you
522      debug mount problems and want to see what is exactly passed
523      to the kernel.
524
525config FEATURE_MOUNT_HELPERS
526    bool "Support mount helpers"
527    default n
528    depends on MOUNT
529    help
530      Enable mounting of virtual file systems via external helpers.
531      E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
532      "obexfs -b00.11.22.33.44.55 /mnt"
533      Also "mount -t sometype [-o opts] fs /mnt" will try
534      "sometype [-o opts] fs /mnt" if simple mount syscall fails.
535      The idea is to use such virtual filesystems in /etc/fstab.
536
537config FEATURE_MOUNT_LABEL
538    bool "Support specifying devices by label or UUID"
539    default y
540    depends on MOUNT
541    select VOLUMEID
542    help
543      This allows for specifying a device by label or uuid, rather than by
544      name. This feature utilizes the same functionality as blkid/findfs.
545      This also enables label or uuid support for swapon.
546
547config FEATURE_MOUNT_NFS
548    bool "Support mounting NFS file systems"
549    default y
550    depends on MOUNT
551    select FEATURE_HAVE_RPC
552    select FEATURE_SYSLOG
553    help
554      Enable mounting of NFS file systems.
555
556config FEATURE_MOUNT_CIFS
557    bool "Support mounting CIFS/SMB file systems"
558    default y
559    depends on MOUNT
560    help
561      Enable support for samba mounts.
562
563config FEATURE_MOUNT_FLAGS
564    depends on MOUNT
565    bool "Support lots of -o flags in mount"
566    default y
567    help
568      Without this, mount only supports ro/rw/remount. With this, it
569      supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
570      noatime, diratime, nodiratime, loud, bind, move, shared, slave,
571      private, unbindable, rshared, rslave, rprivate, and runbindable.
572
573config FEATURE_MOUNT_FSTAB
574    depends on MOUNT
575    bool "Support /etc/fstab and -a"
576    default y
577    help
578      Support mount all and looking for files in /etc/fstab.
579
580config PIVOT_ROOT
581    bool "pivot_root"
582    default y
583    depends on PLATFORM_LINUX
584    help
585      The pivot_root utility swaps the mount points for the root filesystem
586      with some other mounted filesystem. This allows you to do all sorts
587      of wild and crazy things with your Linux system and is far more
588      powerful than 'chroot'.
589
590      Note: This is for initrd in linux 2.4. Under initramfs (introduced
591      in linux 2.6) use switch_root instead.
592
593config RDATE
594    bool "rdate"
595    default y
596    help
597      The rdate utility allows you to synchronize the date and time of your
598      system clock with the date and time of a remote networked system using
599      the RFC868 protocol, which is built into the inetd daemon on most
600      systems.
601
602config RDEV
603    bool "rdev"
604    default y
605    help
606      Print the device node associated with the filesystem mounted at '/'.
607
608config READPROFILE
609    bool "readprofile"
610    default y
611    #depends on PLATFORM_LINUX
612    help
613      This allows you to parse /proc/profile for basic profiling.
614
615config RTCWAKE
616    bool "rtcwake"
617    default y
618    depends on PLATFORM_LINUX
619    help
620      Enter a system sleep state until specified wakeup time.
621
622config SCRIPT
623    bool "script"
624    default y
625    help
626      The script makes typescript of terminal session.
627
628config SCRIPTREPLAY
629    bool "scriptreplay"
630    default y
631    help
632      This program replays a typescript, using timing information
633      given by script -t.
634
635config SETARCH
636    bool "setarch"
637    default y
638    depends on PLATFORM_LINUX
639    help
640      The linux32 utility is used to create a 32bit environment for the
641      specified program (usually a shell). It only makes sense to have
642      this util on a system that supports both 64bit and 32bit userland
643      (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
644
645config SWAPONOFF
646    bool "swaponoff"
647    default y
648    depends on PLATFORM_LINUX
649    help
650      This option enables both the 'swapon' and the 'swapoff' utilities.
651      Once you have created some swap space using 'mkswap', you also need
652      to enable your swap space with the 'swapon' utility. The 'swapoff'
653      utility is used, typically at system shutdown, to disable any swap
654      space. If you are not using any swap space, you can leave this
655      option disabled.
656
657config FEATURE_SWAPON_PRI
658    bool "Support priority option -p"
659    default y
660    depends on SWAPONOFF
661    help
662      Enable support for setting swap device priority in swapon.
663
664config SWITCH_ROOT
665    bool "switch_root"
666    default y
667    depends on PLATFORM_LINUX
668    help
669      The switch_root utility is used from initramfs to select a new
670      root device. Under initramfs, you have to use this instead of
671      pivot_root. (Stop reading here if you don't care why.)
672
673      Booting with initramfs extracts a gzipped cpio archive into rootfs
674      (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
675      or unmounted*, pivot_root will not work from initramfs. Instead,
676      switch_root deletes everything out of rootfs (including itself),
677      does a mount --move that overmounts rootfs with the new root, and
678      then execs the specified init program.
679
680      * Because the Linux kernel uses rootfs internally as the starting
681      and ending point for searching through the kernel's doubly linked
682      list of active mount points. That's why.
683
684config UMOUNT
685    bool "umount"
686    default y
687    depends on PLATFORM_LINUX
688    help
689      When you want to remove a mounted filesystem from its current mount
690      point, for example when you are shutting down the system, the
691      'umount' utility is the tool to use. If you enabled the 'mount'
692      utility, you almost certainly also want to enable 'umount'.
693
694config FEATURE_UMOUNT_ALL
695    bool "Support option -a"
696    default y
697    depends on UMOUNT
698    help
699      Support -a option to unmount all currently mounted filesystems.
700
701comment "Common options for mount/umount"
702    depends on MOUNT || UMOUNT
703
704config FEATURE_MOUNT_LOOP
705    bool "Support loopback mounts"
706    default y
707    depends on MOUNT || UMOUNT
708    help
709      Enabling this feature allows automatic mounting of files (containing
710      filesystem images) via the linux kernel's loopback devices.
711      The mount command will detect you are trying to mount a file instead
712      of a block device, and transparently associate the file with a
713      loopback device. The umount command will also free that loopback
714      device.
715
716      You can still use the 'losetup' utility (to manually associate files
717      with loop devices) if you need to do something advanced, such as
718      specify an offset or cryptographic options to the loopback device.
719      (If you don't want umount to free the loop device, use "umount -D".)
720
721config FEATURE_MOUNT_LOOP_CREATE
722    bool "Create new loopback devices if needed"
723    default y
724    depends on FEATURE_MOUNT_LOOP
725    help
726      Linux kernels >= 2.6.24 support unlimited loopback devices. They are
727      allocated for use when trying to use a loop device. The loop device
728      must however exist.
729
730      This feature lets mount to try to create next /dev/loopN device
731      if it does not find a free one.
732
733config FEATURE_MTAB_SUPPORT
734    bool "Support for the old /etc/mtab file"
735    default n
736    depends on MOUNT || UMOUNT
737    select FEATURE_MOUNT_FAKE
738    help
739      Historically, Unix systems kept track of the currently mounted
740      partitions in the file "/etc/mtab". These days, the kernel exports
741      the list of currently mounted partitions in "/proc/mounts", rendering
742      the old mtab file obsolete. (In modern systems, /etc/mtab should be
743      a symlink to /proc/mounts.)
744
745      The only reason to have mount maintain an /etc/mtab file itself is if
746      your stripped-down embedded system does not have a /proc directory.
747      If you must use this, keep in mind it's inherently brittle (for
748      example a mount under chroot won't update it), can't handle modern
749      features like separate per-process filesystem namespaces, requires
750      that your /etc directory be writable, tends to get easily confused
751      by --bind or --move mounts, won't update if you rename a directory
752      that contains a mount point, and so on. (In brief: avoid.)
753
754      About the only reason to use this is if you've removed /proc from
755      your kernel.
756
757config VOLUMEID
758    bool #No description makes it a hidden option
759    default n
760
761menu "Filesystem/Volume identification"
762    depends on VOLUMEID
763
764config FEATURE_VOLUMEID_EXT
765    bool "Ext filesystem"
766    default y
767    depends on VOLUMEID
768    help
769      TODO
770
771config FEATURE_VOLUMEID_BTRFS
772    bool "btrfs filesystem"
773    default y
774    depends on VOLUMEID
775    help
776      TODO
777
778config FEATURE_VOLUMEID_REISERFS
779    bool "Reiser filesystem"
780    default y
781    depends on VOLUMEID
782    help
783      TODO
784
785config FEATURE_VOLUMEID_FAT
786    bool "fat filesystem"
787    default y
788    depends on VOLUMEID
789    help
790      TODO
791
792config FEATURE_VOLUMEID_HFS
793    bool "hfs filesystem"
794    default y
795    depends on VOLUMEID
796    help
797      TODO
798
799config FEATURE_VOLUMEID_JFS
800    bool "jfs filesystem"
801    default y
802    depends on VOLUMEID
803    help
804      TODO
805
806### config FEATURE_VOLUMEID_UFS
807### bool "ufs filesystem"
808### default y
809### depends on VOLUMEID
810### help
811###   TODO
812
813config FEATURE_VOLUMEID_XFS
814    bool "xfs filesystem"
815    default y
816    depends on VOLUMEID
817    help
818      TODO
819
820config FEATURE_VOLUMEID_NTFS
821    bool "ntfs filesystem"
822    default y
823    depends on VOLUMEID
824    help
825      TODO
826
827config FEATURE_VOLUMEID_ISO9660
828    bool "iso9660 filesystem"
829    default y
830    depends on VOLUMEID
831    help
832      TODO
833
834config FEATURE_VOLUMEID_UDF
835    bool "udf filesystem"
836    default y
837    depends on VOLUMEID
838    help
839      TODO
840
841config FEATURE_VOLUMEID_LUKS
842    bool "luks filesystem"
843    default y
844    depends on VOLUMEID
845    help
846      TODO
847
848config FEATURE_VOLUMEID_LINUXSWAP
849    bool "linux swap filesystem"
850    default y
851    depends on VOLUMEID
852    help
853      TODO
854
855### config FEATURE_VOLUMEID_LVM
856### bool "lvm"
857### default y
858### depends on VOLUMEID
859### help
860###   TODO
861
862config FEATURE_VOLUMEID_CRAMFS
863    bool "cramfs filesystem"
864    default y
865    depends on VOLUMEID
866    help
867      TODO
868
869### config FEATURE_VOLUMEID_HPFS
870### bool "hpfs filesystem"
871### default y
872### depends on VOLUMEID
873### help
874###   TODO
875
876config FEATURE_VOLUMEID_ROMFS
877    bool "romfs filesystem"
878    default y
879    depends on VOLUMEID
880    help
881      TODO
882
883config FEATURE_VOLUMEID_SYSV
884    bool "sysv filesystem"
885    default y
886    depends on VOLUMEID
887    help
888      TODO
889
890### config FEATURE_VOLUMEID_MINIX
891### bool "minix filesystem"
892### default y
893### depends on VOLUMEID
894### help
895###   TODO
896
897### These only detect partition tables - not used (yet?)
898### config FEATURE_VOLUMEID_MAC
899### bool "mac filesystem"
900### default y
901### depends on VOLUMEID
902### help
903###   TODO
904###
905### config FEATURE_VOLUMEID_MSDOS
906### bool "msdos filesystem"
907### default y
908### depends on VOLUMEID
909### help
910###   TODO
911
912config FEATURE_VOLUMEID_OCFS2
913    bool "ocfs2 filesystem"
914    default y
915    depends on VOLUMEID
916    help
917      TODO
918
919### config FEATURE_VOLUMEID_HIGHPOINTRAID
920### bool "highpoint raid"
921### default y
922### depends on VOLUMEID
923### help
924###   TODO
925
926### config FEATURE_VOLUMEID_ISWRAID
927### bool "intel raid"
928### default y
929### depends on VOLUMEID
930### help
931###   TODO
932
933### config FEATURE_VOLUMEID_LSIRAID
934### bool "lsi raid"
935### default y
936### depends on VOLUMEID
937### help
938###   TODO
939
940### config FEATURE_VOLUMEID_VIARAID
941### bool "via raid"
942### default y
943### depends on VOLUMEID
944### help
945###   TODO
946
947### config FEATURE_VOLUMEID_SILICONRAID
948### bool "silicon raid"
949### default y
950### depends on VOLUMEID
951### help
952###   TODO
953
954### config FEATURE_VOLUMEID_NVIDIARAID
955### bool "nvidia raid"
956### default y
957### depends on VOLUMEID
958### help
959###   TODO
960
961### config FEATURE_VOLUMEID_PROMISERAID
962### bool "promise raid"
963### default y
964### depends on VOLUMEID
965### help
966###   TODO
967
968config FEATURE_VOLUMEID_LINUXRAID
969    bool "linuxraid"
970    default y
971    depends on VOLUMEID
972    help
973      TODO
974
975endmenu
976
977endmenu
Note: See TracBrowser for help on using the repository browser.