source: MondoRescue/branches/2.2.9/mindi-busybox/networking/udhcp/arpping.c@ 2725

Last change on this file since 2725 was 2725, checked in by Bruno Cornec, 13 years ago
  • Update mindi-busybox to 1.18.3 to avoid problems with the tar command which is now failing on recent versions with busybox 1.7.3
File size: 4.2 KB
Line 
1/* vi: set sw=4 ts=4: */
2/*
3 * Mostly stolen from: dhcpcd - DHCP client daemon
4 * by Yoichi Hariguchi <yoichi@fore.com>
5 *
6 * Licensed under GPLv2, see file LICENSE in this source tree.
7 */
8#include <netinet/if_ether.h>
9#include <net/if_arp.h>
10
11#include "common.h"
12#include "dhcpd.h"
13
14struct arpMsg {
15 /* Ethernet header */
16 uint8_t h_dest[6]; /* 00 destination ether addr */
17 uint8_t h_source[6]; /* 06 source ether addr */
18 uint16_t h_proto; /* 0c packet type ID field */
19
20 /* ARP packet */
21 uint16_t htype; /* 0e hardware type (must be ARPHRD_ETHER) */
22 uint16_t ptype; /* 10 protocol type (must be ETH_P_IP) */
23 uint8_t hlen; /* 12 hardware address length (must be 6) */
24 uint8_t plen; /* 13 protocol address length (must be 4) */
25 uint16_t operation; /* 14 ARP opcode */
26 uint8_t sHaddr[6]; /* 16 sender's hardware address */
27 uint8_t sInaddr[4]; /* 1c sender's IP address */
28 uint8_t tHaddr[6]; /* 20 target's hardware address */
29 uint8_t tInaddr[4]; /* 26 target's IP address */
30 uint8_t pad[18]; /* 2a pad for min. ethernet payload (60 bytes) */
31} PACKED;
32
33enum {
34 ARP_MSG_SIZE = 0x2a
35};
36
37/* Returns 1 if no reply received */
38int FAST_FUNC arpping(uint32_t test_nip,
39 const uint8_t *safe_mac,
40 uint32_t from_ip,
41 uint8_t *from_mac,
42 const char *interface)
43{
44 int timeout_ms;
45 struct pollfd pfd[1];
46#define s (pfd[0].fd) /* socket */
47 int rv = 1; /* "no reply received" yet */
48 struct sockaddr addr; /* for interface name */
49 struct arpMsg arp;
50
51 s = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ARP));
52 if (s == -1) {
53 bb_perror_msg(bb_msg_can_not_create_raw_socket);
54 return -1;
55 }
56
57 if (setsockopt_broadcast(s) == -1) {
58 bb_perror_msg("can't enable bcast on raw socket");
59 goto ret;
60 }
61
62 /* send arp request */
63 memset(&arp, 0, sizeof(arp));
64 memset(arp.h_dest, 0xff, 6); /* MAC DA */
65 memcpy(arp.h_source, from_mac, 6); /* MAC SA */
66 arp.h_proto = htons(ETH_P_ARP); /* protocol type (Ethernet) */
67 arp.htype = htons(ARPHRD_ETHER); /* hardware type */
68 arp.ptype = htons(ETH_P_IP); /* protocol type (ARP message) */
69 arp.hlen = 6; /* hardware address length */
70 arp.plen = 4; /* protocol address length */
71 arp.operation = htons(ARPOP_REQUEST); /* ARP op code */
72 memcpy(arp.sHaddr, from_mac, 6); /* source hardware address */
73 memcpy(arp.sInaddr, &from_ip, sizeof(from_ip)); /* source IP address */
74 /* tHaddr is zero-filled */ /* target hardware address */
75 memcpy(arp.tInaddr, &test_nip, sizeof(test_nip));/* target IP address */
76
77 memset(&addr, 0, sizeof(addr));
78 safe_strncpy(addr.sa_data, interface, sizeof(addr.sa_data));
79 if (sendto(s, &arp, sizeof(arp), 0, &addr, sizeof(addr)) < 0) {
80 // TODO: error message? caller didn't expect us to fail,
81 // just returning 1 "no reply received" misleads it.
82 goto ret;
83 }
84
85 /* wait for arp reply, and check it */
86 timeout_ms = 2000;
87 do {
88 typedef uint32_t aliased_uint32_t FIX_ALIASING;
89 int r;
90 unsigned prevTime = monotonic_ms();
91
92 pfd[0].events = POLLIN;
93 r = safe_poll(pfd, 1, timeout_ms);
94 if (r < 0)
95 break;
96 if (r) {
97 r = safe_read(s, &arp, sizeof(arp));
98 if (r < 0)
99 break;
100
101 //log3("sHaddr %02x:%02x:%02x:%02x:%02x:%02x",
102 // arp.sHaddr[0], arp.sHaddr[1], arp.sHaddr[2],
103 // arp.sHaddr[3], arp.sHaddr[4], arp.sHaddr[5]);
104
105 if (r >= ARP_MSG_SIZE
106 && arp.operation == htons(ARPOP_REPLY)
107 /* don't check it: Linux doesn't return proper tHaddr (fixed in 2.6.24?) */
108 /* && memcmp(arp.tHaddr, from_mac, 6) == 0 */
109 && *(aliased_uint32_t*)arp.sInaddr == test_nip
110 ) {
111 /* if ARP source MAC matches safe_mac
112 * (which is client's MAC), then it's not a conflict
113 * (client simply already has this IP and replies to ARPs!)
114 */
115 if (!safe_mac || memcmp(safe_mac, arp.sHaddr, 6) != 0)
116 rv = 0;
117 //else log2("sHaddr == safe_mac");
118 break;
119 }
120 }
121 timeout_ms -= (unsigned)monotonic_ms() - prevTime;
122 } while (timeout_ms > 0);
123
124 ret:
125 close(s);
126 log1("%srp reply received for this address", rv ? "No a" : "A");
127 return rv;
128}
Note: See TracBrowser for help on using the repository browser.