source: branches/2.2.7/mindi/mindi @ 2015

Last change on this file since 2015 was 2015, checked in by Bruno Cornec, 12 years ago

Improve logging by adding some /proc content both at backup and restore time

  • Property svn:keywords set to Rev Id
File size: 100.1 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 2015 2008-09-16 14:30:50Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17
18ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20MINDI_REV=PBREV
21MINDI_VER=PBVER
22
23MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
24MINDI_PREFIX=XXX
25MINDI_CONF=YYY
26MINDI_SBIN=${MINDI_PREFIX}/sbin
27MINDI_LIB=LLL
28
29# Temporary directory for mindi
30TMPDIR=/tmp
31
32EXTRA_SPACE=49152       # increase if you run out of ramdisk space
33BOOT_SIZE=16384         # size of the boot disk
34
35PROMPT_MAKE_CD_IMAGE="yes"
36    # Ask if you want to make a CD Image to be written?
37    # if this is set to 'no', then the image will be created automatically
38
39PROMPT_MAKE_USB_IMAGE="yes"
40    # Ask if you want to make a USB Image to be written?
41    # if this is set to 'no', then the image will be created automatically
42
43USE_OWN_KERNEL="yes"
44    # If set to "no", you will be prompted for whether or not
45    # you want to use your own kernel, or the supplied default.
46    # If "yes" mindi will automatically use your own kernel.
47
48MY_FSTAB=/etc/fstab
49TAPE_MODS="ht st osst ide-tape ide_tape"
50SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
51
52# ide-probe-mod
53IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
54PCMCIA_MODS="pcmcia_core ds yenta_socket"
55USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
56NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
57CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
58# Those modules will only go on the backup media, not the boot media.
59EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
60# Replace with that line for HP OCMP e.g.
61#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
62DENY_MODS="kqemu"
63# Force some modules to be included
64FORCE_MODS=""
65
66LOGFILE=/var/log/mindi.log
67MINDI_CACHE=/var/cache/mindi
68BOOT_MEDIA_MESSAGE="\
69To format and restore all files automatically, type 'nuke' <enter>.\n\
70To restore some/all files interactively, type 'interactive' <enter>.\n\
71To compare the archives with your filesystem, type 'compare' <enter>.\n\
72To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
73You may add one or more of the following parameters as well:-\n\n\
74        donteject - mondorestore will not eject the CD; this is useful if, for\n\
75                    instance, your PC's case has a concealed CD-ROM drive\n\
76        noresize  - your mountlist will not be adjusted to use your unallocated\n\
77                    hard disk space\n\
78        textonly  - do not call any Newt library routines; this is unattractive\n\
79                    but valuable if you find your Newt library has bugs in it\n\n\
80e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
81a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
82"
83FDISK=$MINDI_SBIN/parted2fdisk
84
85# Using a config file allow to overwrite some values
86MINDI_CONFIG="$MINDI_CONF/mindi.conf"
87if [ -f $MINDI_CONFIG ]; then
88    . $MINDI_CONFIG
89fi
90DEPLIST_FILE="$MINDI_CONF/deplist.txt"
91ISO_CMD="/usr/bin/mkisofs"
92ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
93
94# Now we can create what we need
95export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
96
97# ----------------------------------------------------------------------------
98
99
100AbortHere() {
101    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
102    Die "Program is terminating in response to signal received from OS/user"
103}
104
105
106Aborted() {
107    trap SIGHUP SIGTERM SIGTRAP SIGINT
108    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
109    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
110    Die "User abort."
111}
112
113
114AddFileToCfgIfExists() {
115    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
116}
117
118
119AddKeyboardMappingFile() {
120    local mappath r included_list included_item i res ii sss
121    mappath=$1
122    KBDEPTH=$(($KBDEPTH+1))
123    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
124    if [ -e "$bigdir/$mappath" ] ; then
125        echo "$mappath already added" >> $LOGFILE
126        return
127    elif [ -d "$bigdir/$mappath" ] ; then
128        echo "Cannot add $mappath: it's a directory. Sorry."
129        return
130    fi
131    echo "Added kbd map $mappath" >> $LOGFILE
132    if [ ! -e "$mappath" ] ; then
133            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
134        if [ ! -e "$mappath" ] ; then
135            LogIt "Cannot add $mappath: kbd map file not found"
136            return
137        fi
138    else
139        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
140    fi
141
142    mkdir -p $bigdir/etc
143    tar cf - $mappath 2>> /dev/null | (cd $bigdir ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir"
144    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
145        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
146    else
147        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
148    fi
149    for included_item in $included_list ; do
150        if [ ! -e "$included_item" ] ; then
151                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
152            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
153            for ii in $sss ; do
154                [ -e "$ii" ] && AddKeyboardMappingFile $ii
155            done
156        else
157            AddKeyboardMappingFile $included_item
158        fi
159    done
160}
161
162
163CopyDependenciesToDirectory() {
164    local outdir incoming fname counter d found
165    outdir=$1
166    mkdir -p $outdir
167    incoming=`ReadLine`
168    counter=0
169    while [ "$incoming" != "" ] ; do
170        # Non absolute file names should not arrive till here => skipped
171        if [ `echo "$incoming" | cut -c1` != '/' ]; then
172            LogIt "Unable to handle $incoming"
173            incoming=`ReadLine`
174            continue
175        fi
176        # no parent directory of incoming should be a link, copy is not possible in that case
177        d=`dirname "$incoming"`
178        found="false"
179        while [ $d != "/" -a $found = "false" ]; do
180            [ -h "$d" ] && found="true"
181            d=`dirname "$d"`
182        done
183        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
184            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
185        elif [ -e "$incoming" ] && [ $found = "false" ]; then
186            tar cf - $incoming 2> /dev/null | (cd $outdir ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
187
188            # Only uncompress modules if not using udevd
189            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
190                gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
191            fi
192            [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
193            counter=$(($counter+1))
194            if [ "$counter" -ge "5" ] ; then
195                counter=0
196                echo -en "."
197            fi
198        fi
199        incoming=`ReadLine`
200    done
201}
202
203
204CountItemsIn() {
205    local r
206    r=0
207    for q in $1 ; do
208        r=$(($r+1))
209    done
210    echo $r
211}
212
213
214# Last function called before exiting
215# Parameter is exit code value
216MindiExit() {
217    local my_partitions
218
219    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
220    echo "End date : `date`" >> $LOGFILE
221    if [ _"$MONDO_SHARE" != _"" ] ; then
222        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
223        cat $LOGFILE >> /var/log/mondoarchive.log
224        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
225    fi
226
227    cd /
228    sync&
229
230    # Unmount what could remain mounted
231    my_partitions=`mount | grep -F $$ | cut -f1 -d' '`
232    [ "$my_partitions" != "" ] && umount $my_partitions
233    # Clean temporary files only when standalone mindi
234    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
235        rm -Rf $MINDI_TMP
236    fi
237    exit $1
238}
239
240Die() {
241    local i
242    if [ "$1" = "" ] ; then
243        LogIt "FATAL ERROR"
244    else
245        LogIt "FATAL ERROR. $1"
246    fi
247
248    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
249    LogIt "See http://www.mondorescue.org for more information."
250    LogIt "WE CANNOT HELP unless you enclose that file.\n"
251    MindiExit -1
252}
253
254
255DropOptimizedLibraries() {
256    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
257    filelist=$1
258    outdir=$2
259
260    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
261    if [ "$list_of_optimized_libraries" = "" ] ; then
262        return 0
263    fi
264    echo -en "Dropping i686-optimized libraries if appropriate"
265    for optimized_lib_name in $list_of_optimized_libraries ; do
266        echo -en "."
267        reason=""
268        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
269        echo "$vanilla_lib_name" >> $filelist
270        resolved=$vanilla_lib_name
271        echo "Adding $resolved to filelist" >> $LOGFILE
272        resolved=`ReadAllLink $resolved`
273        echo "Adding $resolved to filelist" >> $LOGFILE
274        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
275        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
276        ln -sf $vanilla_lib_name $outdir$optimized_lib_name
277        echo "Excluding $optimized_lib_name" >> $LOGFILE
278        grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
279        echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
280        echo "$vanilla_lib_name" >> $filelist.tmp
281        mv -f $filelist.tmp $filelist
282    done
283    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
284    mv -f $filelist.tmp $filelist
285    echo -e "$DONE"
286}
287
288
289FindAndAddUserKeyboardMappingFile() {
290    local r res mapfile mappath included_item included_list keyfile mp locale
291    LogIt "Analyzing your keyboard's configuration."
292    KEYDIR=/lib/kbd
293    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
294    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
295    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
296    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
297    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
298    if [ ! -e "$KEYDIR" ] ; then
299        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
300        return 0
301    fi
302    if [ -e "/etc/sysconfig/keyboard" ] ; then
303        echo "Red Hat-style config detected." >> $LOGFILE
304        keyfile=/etc/sysconfig/keyboard
305    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
306        echo "Slackware-style config detected." >> $LOGFILE
307        keyfile=/etc/rc.d/rc.keymap
308    elif [ -e "/etc/rc.config" ] ; then
309        echo "Debian-style config detected." >> $LOGFILE
310        keyfile=/etc/rc.config
311    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
312        echo "Debian-style config detected." >> $LOGFILE
313        echo -en "Adding the following keyboard mapping tables: "
314        mkdir -p $bigdir/tmp
315        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
316        KBDEPTH=0
317        mkdir -p $bigdir/etc/console
318        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
319        echo -e "$DONE"
320        return 0
321    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
322        echo "Ubuntu-style config detected." >> $LOGFILE
323        echo -en "Adding the following keyboard mapping tables: "
324        mkdir -p $bigdir/tmp
325        echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
326        KBDEPTH=0
327        mkdir -p $bigdir/etc/console-setup
328        cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
329        echo -e "$DONE"
330        return 0
331    elif [ -e "/etc/conf.d/keymaps" ] ; then
332        echo "Gentoo-style config detected." >> $LOGFILE
333        keyfile=/etc/conf.d/keymaps
334    else
335        echo -en "Searching for rc.config ..."
336        keyfile=`find /etc -name rc.config | head -n1`
337        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
338            LogIt "Unknown config detected. Default keyboard map will be used."
339            return
340        else
341            echo "Found $keyfile" >> $LOGFILE
342        fi
343    fi
344    if [ ! -e "$KEYDIR/keymaps" ] ; then
345        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
346        return
347    fi
348    echo "keyfile=$keyfile" >> $LOGFILE
349    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
350    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
351    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo
352    echo "locale=$locale" >> $LOGFILE
353    #
354    # Process the keymaps dir once for all
355    # AddKeyboardMappingFile will use it recursively
356    #
357    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
358    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
359    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
360    # If we have multiple keymaps then log it !!
361    echo "$mp" | grep -q " "
362    if [ $? -eq 0 ]; then
363        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
364        echo "The following one will be used" >> $LOGFILE
365    fi
366    for i in $mp ; do
367        mappath=$i
368        [ -e "$i" ] && [ ! -d "$i" ] && break
369    done
370    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
371            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
372    fi
373    echo "mappath = $mappath" >> $LOGFILE
374    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
375        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
376        return
377    fi
378    echo -en "Adding the following keyboard mapping tables: "
379    mkdir -p $bigdir/tmp
380    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
381    KBDElabel=memtest\nPTH=0
382    AddKeyboardMappingFile $mappath
383    echo -e "$DONE"
384    rm -f $MINDI_TMP/keymaps.find
385    return 0
386}
387
388
389FindIsolinuxBinary() {
390    ISOLINUX=/usr/lib/isolinux.bin
391    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
392    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
393    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
394    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
395    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
396    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
397    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
398    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
399}
400
401
402FindSpecificModuleInPath() {
403    local modpaths pwd line
404    pwd=`pwd`
405    if [ "$YOUR_KERNEL_SUCKS" ] ; then
406        cd $MINDI_TMP
407    else
408        cd /
409    fi
410    if [ ! -e "$1" ] ; then
411        LogIt "WARNING - cannot search specific path '$1'"
412        return 1
413    fi
414    modpaths=`find $1 -name $2.*o -type f`
415    #[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
416    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
417    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
418    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
419    echo "$modpaths"
420    cd $pwd
421}
422
423
424GenerateGiantDependencyList() {
425    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
426
427    echo -en "Analyzing dependency requirements"
428    outfile=$1
429    tempfile=$MINDI_TMP/$$.txt
430    incoming=`ReadLine`
431
432    > $tempfile
433    progress=0
434    res=0
435    noof_lines=$2
436    while [ "$incoming" != "" ] ; do
437        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
438            incoming=`ReadLine`
439            continue
440        fi
441        if [ "$incoming" = "LVMFILES:" ] ; then
442            break
443        fi
444        filelist=`GenerateListForFile "$incoming"`
445        r=$?
446        [ "$r" -ne "0" ] && LogIt "$incoming not found"
447        res=$(($res+$r))
448#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
449        for fname in $filelist ; do
450            [ "$fname" != "" ] && echo "$fname" >> $tempfile
451        done
452        progress=$(($progress+1))
453        echo -en "\r\t\t\t\t\t\t\t\t"
454        i=$(($progress*100))
455        i=$(($i/$noof_lines))
456        echo -en "$i"
457        echo -en "%"
458        modres=$(($progress%4))
459        [ "$modres" -eq "0" ] && echo -en "\t/"
460        [ "$modres" -eq "1" ] && echo -en "\t-"
461        [ "$modres" -eq "2" ] && echo -en "\t\\"
462        [ "$modres" -eq "3" ] && echo -en "\t|"
463        incoming=`ReadLine`
464    done
465    if  [ "$incoming" = "LVMFILES:" ] ; then
466        incoming=`ReadLine`
467        lvmversion=""
468        while [ "$incoming" != "" ] ; do
469            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
470                incoming=`ReadLine`
471                continue
472            fi
473            filelist=`GenerateListForFile "$incoming"`
474            for tool in $filelist ; do
475                lvmresolved=`readlink -f $tool`
476                if [ "$tool" = "$lvmresolved" ]; then
477                    echo "$tool" >> $tempfile
478                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
479                    if [ "$lvmversion" = "" ] ; then
480                        lvmversion=`$lvmresolved`
481                        echo "$lvmresolved" >> $tempfile
482                    fi
483                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
484                    if [ "$lvmversion" = "200" ]; then
485                        # pvdata and lvmcreate_initrd don't exist in LVM2
486                        case "$toolstripped" in
487                        "pvdata")
488                            continue
489                            ;;
490                        "lvmcreate_initrd")
491                            continue
492                            ;;
493                        esac
494                    fi
495                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
496                    if [ -e "$toolpath" ] ; then
497                        echo "$toolpath" >> $tempfile
498                        echo "$tool" >> $tempfile
499                    else
500                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
501                    fi
502                    if [ -e "$toolpath" ] ; then
503                        echo "$toolpath" >> $tempfile
504                        echo "$tool" >> $tempfile
505                    else
506                        echo "Where are your LVM-Tools? Couldn't find $tool"
507                    fi
508                else
509                    echo "$tool" >> $tempfile
510                fi
511            done
512            progress=$(($progress+1))
513            echo -en "\r\t\t\t\t\t\t\t\t"
514            i=$(($progress*100))
515            i=$(($i/$noof_lines))
516            echo -en "$i"
517            echo -en "%"
518            modres=$(($progress%4))
519            [ "$modres" -eq "0" ] && echo -en "\t/"
520            [ "$modres" -eq "1" ] && echo -en "\t-"
521            [ "$modres" -eq "2" ] && echo -en "\t\\"
522            [ "$modres" -eq "3" ] && echo -en "\t|"
523            incoming=`ReadLine`
524        done
525    fi
526    echo -en "$DONE\nMaking complete dependency list"
527
528    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
529    mv -f $tempfile.new $tempfile
530    > $outfile.pre
531    progress=0
532    noof_lines=`cat $tempfile | wc -l`
533    echo "---------------------------------" >> $LOGFILE
534    echo "List of dependencies:             " >> $LOGFILE
535    echo "---------------------------------" >> $LOGFILE
536    for fname in `cat $tempfile` ; do
537        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
538        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
539        progress=$(($progress+1))
540        echo -en "\r\t\t\t\t\t\t\t\t"
541        i=$(($progress*100))
542        i=$(($i/$noof_lines))
543        echo -en "$i"
544        echo -en "%"
545        modres=$(($progress%4))
546        [ "$modres" -eq "0" ] && echo -en "\t/"
547        [ "$modres" -eq "1" ] && echo -en "\t-"
548        [ "$modres" -eq "2" ] && echo -en "\t\\"
549        [ "$modres" -eq "3" ] && echo -en "\t|"
550    done
551    if [ _"$MONDO_SHARE" != _"" ]; then
552        mkdir -p $bigdir/tmp
553        mkdir -p $bigdir/sbin
554        mkdir -p $bigdir/bin
555        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
556            LogIt "\nIncorporating post-nuke tarball"
557            old_pwd=`pwd`
558            cd $bigdir
559            tar -zxf $MINDI_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
560            cd $old_pwd
561        fi
562        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
563            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
564        else
565            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
566            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
567            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
568            Die "Odd."
569        fi
570        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
571        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
572            LogIt "Incorporating NFS-related settings"
573            for r in NFS-* ISO-PREFIX ; do
574                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
575                echo "Copying $r to ramdisk" >> $LOGFILE
576            done
577        fi
578    fi
579    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
580    rm -f $tempfile $outfile.pre
581    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
582    return $res
583}
584
585
586GenerateListForFile() {
587    local files_found loc fname incoming i res
588    incoming="$1"
589    files_found=""
590    res=0
591
592    for fname in $incoming ; do
593        files_found="$files_found `LocateFile $fname`"
594    done
595
596    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
597}
598
599
600# Returns all disk devices which are part of a raid array
601GetAllRaidMembers() {
602    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
603}
604
605
606GetFileSizeList() {
607    local i
608    for i in `find $1 -type d -o -print` ; do
609        du -sk $i
610    done
611}
612
613
614GetHomeDir() {
615    local res loc
616    loc=`which $1 2>/dev/null`
617    res=`file $loc | $AWK '{print $NF;}'`
618    dirname $res
619}
620
621
622# Check kernel filesystem capabilites for accessing initrd image
623#
624# Interface definition:
625# param #1: absolute path to kernel image
626GetInitrdFilesystemToUse() {
627
628    # interface test: make sure we have one parameter
629    if [ $# -ne 1 ]; then
630        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
631    fi
632
633    # interface parameters
634    local lvKernelImage=$1
635
636    # local constants (filesystem magic strings)
637    local lcMagicCramfs="<3>cramfs: wrong magic"
638    local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
639    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs..."
640
641    # local variables
642    local lvOffset
643    local lvScanRes
644    local lvUseFilesystem
645
646    # say where we are.
647    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
648
649    # verify that file exists
650    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
651
652    # Kernel may be gzip compressed
653    file $lvKernelImage 2>&1 | grep -q gzip
654    if [ $? -eq 0 ]; then
655        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
656    else
657        # get offet of gzip magic "1f8b0800" in file
658        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}'`
659        [ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
660        lvOffset=`expr $lvOffset / 2`
661        echo "  GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
662
663        # scan kernel image for initrd filessystem support
664        lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
665    fi
666
667    # determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
668    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
669        lvUseFilesystem="ext2fs"
670    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
671        lvUseFilesystem="initramfs"
672    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
673        lvUseFilesystem="cramfs"
674    else
675        lvUseFilesystem="UNSUPPORTED"
676    fi
677
678    # say what we are using
679    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
680
681    # return file system to use
682    echo "$lvUseFilesystem"
683
684}
685
686# Searches parent raid device of given disk device
687# $1: disk device (i.e. /dev/hda1)
688GetParentRaidDev() {
689    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
690}
691
692
693# Searches members of raid device
694# $1: raid device (/dev/md...)
695GetRaidDevMembers() {
696    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
697}
698
699
700HackPathsToFailsafe() {
701    local incoming newpath kver stub i pwd
702    kver=`uname -r`
703    incoming=`ReadLine`
704    pwd=`pwd`
705    cd $MINDI_TMP
706    while [ "$incoming" != "" ] ; do
707        stub=`basename $incoming`
708        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
709        for i in $newpath ; do
710            echo "$i"
711        done
712        read incoming
713    done
714    cd $pwd
715}
716
717
718ListAllPartitions() {
719    local res currline partition all_partitions ap_orig remaining i j
720
721    grep -vx " *#.*" $MY_FSTAB | grep -vx " *none.*" | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/fdd|cdr|zip|floppy/ {print $1}'
722    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
723    if [ -e "/vmfs/volumes" ]; then
724        # For VMWare ESX 3 get the device names of these volumes
725        vdf -P | grep -E '/vmfs/volumes' | awk '{print $1}'
726    fi
727    return
728}
729
730
731ListImagesForUser() {
732    local path fname
733    path=$MINDI_CACHE
734    echo -en "In the directory '$path' you will find the images:-\n"
735    for fname in `ls $path | grep -F mindi-` ; do
736        printf "%19s " $fname
737    done
738    echo " "
739}
740
741
742ListKernelModulePaths() {
743    local module_list module fname oss r kern
744    oss="/root/oss/modules"
745    module_list="$MODULES"
746    # Remove unwanted modules from list
747    for i in $DENY_MODS; do
748        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
749        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
750    done
751###
752### Sq-Modification ... Use kernelname for module search path if specified
753###
754    # kern="`uname -r`"
755    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
756    then
757        kern=${kernelname}
758    else
759        kern="`uname -r`"
760    fi
761###
762### Sq-Mod End
763###
764    for module in $module_list $EXTRA_MODS ; do
765        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
766        echo "module $module --> $r" >> $LOGFILE
767        [ "$r" ] && echo "$r"
768        [ -f "$oss" ] && find $oss | grep -F $module
769    done
770    find /lib/modules/$kern/modules.* -type f 2> /dev/null
771    [ -f "$oss" ] && find $oss.* 2> /dev/null
772}
773
774#
775# Critical function which computes all dependencies (dyn. lib.)
776# for a list of binaries
777#
778LocateDeps() {
779    local incoming fname deps
780    incoming="$*"
781    for fname in $incoming ; do
782        if [ ! -e "$fname" ] ; then
783            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
784            if echo $fname | grep lvm &> /dev/null ; then
785                echo "This warning only affects you if you are using LVM." >> $LOGFILE
786                if echo "$MODULES" | grep lvm &> /dev/null ; then
787                    echo "I think you are, so please take heed!" >> $LOGFILE
788                else
789                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
790                fi
791            fi
792        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
793            echo "$fname is softlink" >> $LOGFILE
794        else
795            ldd $fname 2> /dev/null | ProcessLDD
796        fi
797    done
798}
799
800
801# Give all symlinks recursively of a full path name
802ReadAllLink() {
803    file="$1"
804
805    echo "$file"
806    if [ ! -h $file ]; then
807        return 0
808    fi
809
810    link=`readlink $file`
811    d=`dirname $file`
812    fchar=`echo $link | cut -c1`
813    # If mother dir is a link print it
814    if [ -h "$d" ]; then
815        echo "$d"
816        d=`readlink $d`
817    fi
818    if [ "$fchar" != "/" ]; then
819        # Relative or local link
820        ReadAllLink "$d/$link" 
821    else
822        # Absolute path
823        ReadAllLink $link 
824    fi
825}
826
827
828LocateFile() {
829    local i path fname_to_find location output resolved tmp stub cache_id loclist
830    fname_to_find="$1"
831    # It's an absolute path
832    if echo "$fname_to_find" | grep -x "/.*" ; then
833        output="$fname_to_find"
834        if [ -h "$output" ] ; then
835            output="`ReadAllLink $output` $output"
836        fi
837        echo "$output"
838        return 0
839    fi
840    # It's not an absolute path
841    output=""
842    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
843    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
844        [ -h "$path" ] && continue
845        [ ! -e "$path/$fname_to_find" ] && continue
846        output="$path/$fname_to_find $output"
847        if [ -h "$path/$fname_to_find" ] ; then
848            output="`ReadAllLink $path/$fname_to_find` $output"
849        fi
850    done
851    if [ "$output" = "" ] ; then
852        return 1
853    fi
854    echo "$output"
855    return 0
856}
857
858
859LogIt() {
860    if [ -e /dev/stderr ] ; then
861        echo -e "$1" >> /dev/stderr
862    elif [ -e /usr/bin/logger ] ; then
863        /usr/bin/logger -s $1
864    fi
865    echo -e "$1" >> $LOGFILE
866}
867
868
869# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
870MakeMondoConfigFile() {
871    local outfile use_lzo use_comp use_star
872    outfile=$1
873    > $outfile
874    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
875    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
876    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
877    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
878    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
879    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
880    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
881    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
882    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
883    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
884    echo "use-lzo $use_lzo" >> $outfile
885    echo "use-gzip $use_gzip" >> $outfile
886    echo "use-star $use_star" >> $outfile
887    echo "use-comp $use_comp" >> $outfile
888    echo "datestamp `date`" >> $outfile
889    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
890    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
891    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
892    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
893    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
894    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
895    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
896    AddFileToCfgIfExists $MINDI_TMP/NFS-DEV           nfs-dev           $outfile
897    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
898    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
899    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
900    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
901    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
902    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
903    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
904    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
905    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
906    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
907    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
908    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
909    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
910    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
911}
912
913
914MakeMountlist() {
915    local scratchdir mountlist all_partitions current_partition \
916partition_size partition_format outstring partition_number \
917partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
918absolute_partition old_partition_fmt current_lvolume uname skip
919
920    echo "Your raw fstab file looks like this:" >> $LOGFILE
921    echo "------------------------------------" >> $LOGFILE
922    cat $MY_FSTAB >> $LOGFILE
923    echo "Your mountlist will look like this:" | tee -a $LOGFILE
924    echo "-----------------------------------" >> $LOGFILE
925
926# scratchdir, mountlist(OUT)
927    scratchdir=$MINDI_TMP
928    mountlist=$1
929
930# NB: partition = device
931# NB: mountpt = where the device is mounted
932
933    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
934
935    [ "$mountlist" != "" ] && rm -Rf $mountlist
936    > $mountlist
937    all_partitions=""
938   
939    if [ $LVM != "false" ]; then
940        echo -en "Analyzing LVM...\n"
941        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
942        if [ $? -ne 0 ]; then
943            LVM="false"
944        fi
945        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-32`
946    fi
947    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
948#    echo "all partitions = $all_partitions" > /dev/stderr
949    for i in $IMAGE_DEVS ; do
950        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
951    done
952    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
953    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
954    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
955    for c_p in $all_partitions ; do
956        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] && continue
957        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
958        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
959            current_partition=`readlink -f $c_p`
960            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
961            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
962        else
963            current_partition="$c_p"
964        fi
965        [ "$c_p" = "none" ] && continue
966        redhat_label=""
967        label=""
968        uuid=""
969        absolute_partition=`readlink -f $c_p`
970        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
971
972        # Detects noauto partitions not mounted and exclude them
973        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
974        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
975            continue
976        fi
977
978        # set default in case we dont't find it
979        str_to_find_fmt_with=$current_partition
980
981        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
982        # current_partition contains only first column of /etc/fstab
983        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
984            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
985            actual_dev=""
986
987            # 1st try, findfs - the RHEL way of finding labels and their partitions
988            if [ -x "/sbin/findfs" ]; then
989                actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
990            fi
991   
992            # 2nd try : blkid, the good way for all LABEL except swap
993            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
994                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
995                # For LVM FS it will give a /dev/dm-# which should then be converted
996                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
997                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
998                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
999                    for dev in `ls /dev/mapper/*`; do
1000                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1001                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1002                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1003                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1004                            break
1005                        fi
1006                    done
1007                fi
1008            fi
1009   
1010            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1011            # For LVM gives a /dev/mapper entry
1012            if [ "x$actual_dev" = "x" ]; then
1013                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1014            fi
1015   
1016            # 4th try, with vol_id
1017            # SWAP only
1018            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1019                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1020                for dev_swap in $list_swaps ; do
1021                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1022                    if [ "x$dev_exists" != "x" ]; then
1023                        actual_dev=$dev_swap
1024                        break;
1025                    fi
1026                done
1027            fi
1028
1029            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1030            # LABEL=SW-cciss/c0d0p3 (RDP)
1031            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1032            # SWAP only
1033            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1034                    skip=""
1035                    uname="`uname -r`"
1036                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1037                    # 2.6.12 needs 16 (FC3)
1038                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1039                    # 2.6.19 and upper needs 1052
1040                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1041                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1042                    if [ $skip = "" ]; then
1043                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1044                    fi
1045                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1046                    do
1047                        # Location of the swap label for kernel 2.6
1048                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1049                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1050                            actual_dev=$try_dev
1051                        fi
1052                    done
1053            fi
1054
1055            # Check if one of all those tries has known success
1056            if [ "x$actual_dev" != "x" ]; then
1057                current_partition=$actual_dev
1058            else
1059                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1060            fi
1061        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1062        # current_partition contains only first column of /etc/fstab
1063        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1064            uuid=`echo "$current_partition" | cut -d'=' -f2`
1065            actual_dev=""
1066
1067            # 1st try, findfs - the RHEL way of finding labels and their partitions
1068            if [ -x "/sbin/findfs" ]; then
1069                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1070            fi
1071   
1072            # 2nd try : blkid, the good way for all UUID except swap
1073            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1074                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1075                # For LVM FS it will give a /dev/dm-# which should then be converted
1076                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1077                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1078                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1079                    for dev in `ls /dev/mapper/*`; do
1080                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1081                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1082                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1083                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1084                            break
1085                        fi
1086                    done
1087                fi
1088            fi
1089   
1090            # 3th try, with vol_id
1091            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1092                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1093                for dev in $list_dev ; do
1094                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1095                    if [ "x$dev_exists" != "x" ]; then
1096                        actual_dev=$dev
1097                        break;
1098                    fi
1099                done
1100            fi
1101
1102            # 4th try, with dumpuuid (VMWare only ?) for swap
1103            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1104                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1105                for dev in $list_dev ; do
1106                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1107                    if [ "x$dev_exists" != "x" ]; then
1108                        actual_dev=$dev
1109                        break;
1110                    fi
1111                done
1112            fi
1113
1114            # Check if one of all those tries has known success
1115            if [ "x$actual_dev" != "x" ]; then
1116                current_partition=$actual_dev
1117            else
1118                Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1119            fi
1120        else
1121            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1122            # they use symlinks in fstab unrelated to what is shown in mount !
1123            if [ _"$partition_mountpt" = _"" ]; then
1124                # set default in case we dont't find it
1125                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1126                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1127                            str_to_find_fmt_with=$tmpp
1128                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1129                            break;
1130                        fi
1131                done
1132            fi
1133        fi
1134
1135        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1136        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1137        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1138        # the former is then a link to the latter, so we test whether
1139        # $current_partition is actually such a link or not and set
1140        # $current_lvolume accordingly. On Debian you may find more than one answer
1141        # so we remove the one corresponding to /dev/.static
1142        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1143        # principle is the same and we need to find the link to it as well.
1144        # Note that $current_lvolume may well be an
1145        # ordinary device. It is just to make sure that we feed the right value
1146        # into any of the LVM tools if possible.
1147
1148        current_lvolume="$current_partition"
1149        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1150            # .static dir are a Debian specificity
1151            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1152            echo $current_lvolume | grep -q ' '
1153            if [ $? -eq 0 ]; then
1154                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1155            fi
1156        fi
1157        #
1158        # End of LVM device style variation code (other than $current_lvolume).
1159
1160        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1161            # Size computed via LVM not directly
1162            partition_size="lvm"
1163        else
1164            partition_size=`SizeOfPartition $current_partition`
1165            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1166            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1167            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1168                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition" | $AWK '{print $3}'`
1169                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1170                [ "$partition_format" != "swap" ] && partition_format="swap"
1171                if [ "$partition_size" = "" ] ; then
1172                    totalsize=0
1173                    items=0
1174                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1175                        totalsize=$(($totalsize+$i))
1176                        items=$(($items+1))
1177                    done
1178                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1179                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1180                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1181                fi
1182            fi
1183        fi
1184        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1185        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1186        if [ "$partition_mountpt" = "" ] ; then
1187            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1188                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1189                    partition_mountpt="raid"
1190                    partition_format="raid"
1191                else
1192                    partition_mountpt="lvm"
1193                    partition_format="lvm"
1194                fi
1195            fi
1196        fi
1197        psz=$partition_size
1198        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1199        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1200        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1201            partition_mountpt="image"
1202            old_partition_fmt=$partition_format
1203            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1204            partition_size=$(($partition_size+1)); # just in case
1205            if [ "$partition_format" = "Linux" ] ; then
1206                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1207                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1208                partition_format=$old_partition_fmt
1209            fi
1210        fi
1211        if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | grep -F " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
1212            echo "Excluding $current_partition from mountlist" >> $LOGFILE
1213            continue
1214        fi
1215        if [ ! "$partition_mountpt" ] ; then
1216            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1217            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1218                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1219                [ "$partition_format" ] && break
1220            done
1221            echo "------- $FDISK log end ------------" >> $LOGFILE
1222            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1223                partition_format="compaq"
1224            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1225                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1226                continue
1227            fi
1228        fi
1229        if [ "$redhat_label" ]; then
1230            label="$redhat_label"
1231        elif [ "$uuid" ]; then
1232            label="$uuid"
1233        fi
1234        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1235        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1236        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1237        if [ "$current_partition" = "" ] ; then
1238            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1239        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1240            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1241                partition_mountpt=raid
1242                partition_format=raid
1243                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1244                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1245            else
1246                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1247            fi
1248        elif [ "$partition_format" = "" ] ; then
1249            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1250        elif [ "$partition_size" = "" ] ; then
1251            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1252        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1253            continue
1254        else
1255            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1256                echo "Stupid bastard..." >> $LOGFILE
1257                partition_format="vfat"
1258            fi
1259            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1260            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1261        fi
1262    done
1263}
1264
1265
1266MakeSureNumberIsInteger() {
1267    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1268    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1269    echo "result = '$res'"
1270        Die "$1 should be an integer"
1271    fi
1272}
1273
1274
1275OfferToMakeBootableISO() {
1276    local i old_pwd
1277    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1278        echo -en "Shall I make a bootable CD image? (y/[n]) "
1279        read i
1280        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1281    fi
1282    if [ _"$MINDI_TMP" = _"" ]; then
1283        Die "MINDI_TMP undefined"
1284    fi
1285    rm -Rf $MINDI_TMP/iso
1286    mkdir -p $MINDI_TMP/iso/{images,archives}
1287    cp -f $MINDI_CACHE/*.gz $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1288    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1289    for i in memdisk memtest.bin memtest.img ; do
1290        j=$MINDI_LIB/$i
1291        k=$MINDI_TMP/iso
1292        if [ -e "$j" ] ; then
1293            LogIt "Copying $j to $k"
1294            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1295            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1296            if [ _"$MONDO_SHARE" != _"" ]; then 
1297                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1298            fi
1299        fi
1300    done
1301    MakeMessageFile > $MINDI_TMP/iso/message.txt
1302    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1303    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1304    if [ _"$MONDO_SHARE" != _"" ]; then 
1305        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1306        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1307    fi
1308    MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
1309    if [ "$ARCH" != "ia64" ] ; then
1310        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1311    fi
1312    old_pwd=`pwd`
1313    cd $MINDI_TMP/iso
1314    if [ "$ARCH" != "ia64" ] ; then
1315        if [ _"$MONDO_SHARE" != _"" ]; then 
1316            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1317            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1318        fi
1319        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1320    else
1321        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1322        rm -f images/mindi-bootroot.$BOOT_SIZE.img
1323    fi
1324    if [ "$?" -ne "0" ] ; then
1325        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1326        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1327        echo "$ISO_CMD returned the following errors:-"
1328        cat $MINDI_TMP/mkisofs.log
1329        LogIt "Failed to create ISO image."
1330    else
1331        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1332    fi
1333    rm -f $MINDI_TMP/mkisofs.log
1334    cd $old_pwd
1335}
1336
1337
1338OfferToMakeBootableUSB() {
1339    local i old_pwd
1340    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1341        echo -n "Shall I make a bootable USB image ? (y/[n]) "
1342        read i
1343        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1344        if [ "$USBDEVICE" = "" ]; then
1345            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1346            read dev
1347            USBDEVICE=$dev
1348        fi
1349        echo "WARNING: This will erase all content on $USBDEVICE"
1350        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1351    fi
1352    if [ _"$MINDI_TMP" = _"" ]; then
1353        Die "MINDI_TMP undefined"
1354    fi
1355    rm -Rf $MINDI_TMP/usb
1356    mkdir -p $MINDI_TMP/usb
1357    USBPART="${USBDEVICE}1"
1358
1359    echo -en "Transforming $USBDEVICE in a Bootable device " 
1360    echo -en "."
1361    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1362    echo "Checking $USBDEVICE" >> $LOGFILE
1363    $FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1364    if [ $? -ne 0 ]; then
1365        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1366        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1367        exit -1
1368    fi
1369    echo -en "."
1370    echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1371    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1372    echo "Erasing $USBDEVICE" >> $LOGFILE
1373    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1374d
1375d
1376d
1377d
1378n
1379p
13801
1381
1382
1383t
1384b
1385a
13861
1387w
1388EOF
1389    if [ $? -ne 0 ]; then
1390        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1391        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1392        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1393        MindiExit -1
1394    fi
1395    echo -en "."
1396    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1397    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1398    if [ $? -ne 0 ]; then
1399        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1400        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1401        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1402        MindiExit -1
1403    fi
1404    echo -en "."
1405    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1406    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1407    if [ $? -ne 0 ]; then
1408        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1409        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1410        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1411        MindiExit -1
1412    fi
1413    echo -en "."
1414    mkdir -p $MINDI_TMP/usb/images
1415    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1416    echo -en "."
1417    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1418    for i in memdisk memtest.bin memtest.img ; do
1419        j=$MINDI_LIB/$i
1420        k=$MINDI_TMP/usb
1421        if [ -e "$j" ] ; then
1422            LogIt "Copying $j to $k"
1423            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1424            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1425        fi
1426    done
1427    echo -en "."
1428    MakeMessageFile > $MINDI_TMP/usb/message.txt
1429    echo -en "."
1430    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1431    echo -en "."
1432    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1433    echo -en "."
1434    MakeBootConfFile syslinux > syslinux.cfg
1435    echo -en "."
1436    umount $MINDI_TMP/usb
1437    if [ "$ARCH" != "ia64" ] ; then
1438        syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1439        if [ "$?" -ne "0" ] ; then
1440            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1441            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1442            LogIt "Failed to create USB image."
1443        else
1444            echo -e "$DONE"
1445            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1446        fi
1447        rm -f $MINDI_TMP/syslinux.log
1448    else
1449        echo "No USB boot support for ia64" | tee -a $LOGFILE
1450        MindiExit -1
1451    fi
1452    echo -en "."
1453}
1454
1455
1456MakeMessageFile() {
1457    iss="/dev/null"
1458    [ -e /etc/issue ] && iss="/etc/issue"
1459    [ -e /etc/issue.net ] && iss="/etc/issue.net"
1460    if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
1461        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1462    else
1463        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1464    fi
1465    if [ _"$MONDO_SHARE" != _"" ]; then
1466        if [ "$CDRECOVERY" != "yes" ] ; then
1467            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1468                echo -en "Press <enter> to continue.\n"
1469            elif [ ! "$MINDI_TMP" ] ; then
1470                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1471                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1472                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1473                fi
1474            else
1475                echo -en "$BOOT_MEDIA_MESSAGE"
1476            fi
1477        else
1478            echo -en "\
1479To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1480CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1481        fi
1482    fi
1483    echo -en "\n\n\n"
1484}
1485
1486
1487MakeBootConfFile() {
1488    local options i ooo
1489    options=""
1490    # Type of boot file (elilo or syslinux/isolinux)
1491    type=$1
1492    if [ "$type" = "elilo" ]; then
1493        sep="="
1494    else
1495        sep=" "
1496    fi
1497
1498    # Generic header for conf file
1499    if [ "$type" != "elilo" ] ; then
1500        echo -en "prompt 1\ndisplay message.txt\n"
1501    else
1502        echo -en "prompt\n"
1503    fi
1504
1505    # Compute which default option to boot from
1506    if [ "$CDRECOVERY" = "yes" ] ; then
1507        echo -en "default${sep}RESTORE\n"
1508    # In case it's mondoarchive
1509    elif [ _"$MONDO_SHARE" != _"" ]; then
1510        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1511            echo -en "default${sep}iso\n"
1512        else
1513            echo -en "default${sep}interactive\n"
1514        fi
1515    else
1516        echo -en "default${sep}expert\n"
1517    fi
1518
1519    # Handle timeout
1520    if [ "$CDRECOVERY" != "yes" ] ; then
1521        echo -en "timeout${sep}300\n"
1522    else
1523        echo -en "timeout${sep}10000\n"
1524    fi
1525    echo -en "\n"
1526
1527    # prepare which labels will be generted
1528    if [ "$CDRECOVERY" = "yes" ] ; then
1529        options="RESTORE expert"
1530    else
1531        if [ _"$MONDO_SHARE" != _"" ]; then
1532            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1533                options="iso"
1534            else
1535                options="interactive expert compare iso nuke isonuke"
1536            fi
1537        else
1538            options="expert"
1539        fi
1540    fi
1541
1542    # Generate rest of conf file
1543    for i in $options ; do
1544        ooo=$i
1545        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1546        if [ "$type" = "elilo" ]; then
1547            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
1548        else
1549            outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
1550        fi
1551        echo -en "$outstr"
1552    done
1553
1554    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1555        if [ "$type" = "elilo" ]; then
1556            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1557            echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
1558        else
1559            echo -en "label memtest\n\tkernel /memtest.bin\n"
1560            echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
1561        fi
1562    fi
1563}
1564
1565
1566PrepareBootDiskImage_LILO() {
1567    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1568    imagesdir=$MINDI_CACHE
1569    kernelpath=$1
1570
1571    retval=0
1572    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1573    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1574    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1575    echo -en "..."
1576    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1577    mountpoint=$MINDI_TMP/mountpoint.$$
1578    mkdir -p $mountpoint
1579    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1580    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1581    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1582    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1583    mkdir -p $mountpoint/etc
1584    liloconf=$mountpoint/elilo.conf
1585
1586    MakeBootConfFile elilo > $liloconf
1587
1588    # Copy it so that CD-ROM menu entry is satisfied
1589    mountefi=0
1590    df -T | grep /boot/efi | grep -q vfat
1591    if [ $? -ne 0 ]; then
1592        mount /boot/efi
1593        if [ $? -ne 0 ]; then
1594            echo "You have to mount your EFI partition when using mindi"
1595            MindiExit -1
1596        fi
1597        mountefi=1
1598    fi
1599    el=`find /boot/efi -name elilo.efi`
1600    cp $el $mountpoint
1601    cp $liloconf $mountpoint
1602    if [ $mountefi -eq 1 ]; then
1603        umount /boot/efi 2>&1 > /dev/null
1604    fi
1605
1606    echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1607    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1608    if [ "$?" -ne "0" ] ; then
1609        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1610        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1611        LogIt "Please unload some of your modules and try again."
1612        rm -f $MINDI_TMP/mtpt.$$
1613        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1614        retval=$(($retval+1))
1615    fi
1616    MakeMessageFile > $mountpoint/message.txt
1617
1618    mkdir -p $mountpoint/tmp
1619    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1620        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1621    fi
1622
1623    # copy the kernel across
1624    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1625    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1626    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1627    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1628    if [ "$?" -ne "0" ] ; then
1629        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1630        du -sk $mountpoint/* >> $LOGFILE
1631        echo "--- end of list of files ---" >> $LOGFILE
1632        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1633Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1634        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1635        cd $old_pwd
1636        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1637        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1638    #   losetup /dev/loop0 -d
1639        [ "$imagefile" != "" ] && rm -f $imagefile
1640        return 0
1641    fi
1642    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1643    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1644    echo "Free space left on image = $free_space KB" >> $LOGFILE
1645    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1646    # make it bootable
1647    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1648    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1649    if [ "$KERN_DISK_MADE" ] ; then
1650        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1651    fi
1652
1653    cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
1654    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1655    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1656    echo -en "..."
1657    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1658    if [ "$retval" -eq "0" ] ; then
1659        echo -en "...$DONE\n"
1660        if [ "$KERN_DISK_MADE" ] ; then
1661            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1662        fi
1663    else
1664        echo -en "...failed\n"
1665        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1666        [ "$imagefile" != "" ] && rm -f $imagefile
1667    fi
1668    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1669    return $retval
1670}
1671
1672
1673PrepareBootDiskImage_SYSLINUX() {
1674    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1675    imagesdir=$MINDI_CACHE
1676    kernelpath=$1
1677    do_boot_root_thingy=""
1678    local retval old_pwd
1679    retval=0
1680
1681    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1682    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1683    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1684    echo -en "..."
1685    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1686    mountpoint=$MINDI_TMP/mountpoint.$$
1687    mkdir -p $mountpoint
1688    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1689    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1690    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1691    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1692
1693    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1694
1695    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1696    MakeMessageFile > $mountpoint/message.txt
1697    MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
1698    echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1699    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1700    if [ "$?" -ne "0" ] ; then
1701        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1702        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1703        LogIt "Please unload some of your modules and try again."
1704        rm -f $MINDI_TMP/mtpt.$$
1705        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1706        retval=$(($retval+1))
1707    fi
1708
1709    mkdir -p $mountpoint/tmp
1710    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1711        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1712    fi
1713
1714    # copy the kernel across
1715    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1716    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1717    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1718    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1719    if [ "$?" -ne "0" ] ; then
1720        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1721        du -sk $mountpoint/* >> $LOGFILE
1722        echo "--- end of list of files ---" >> $LOGFILE
1723        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1724Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1725        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1726        cd $old_pwd
1727        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1728        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1729
1730        [ "$imagefile" != "" ] && rm -f $imagefile
1731        return 0
1732    fi
1733    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1734    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1735    echo "Free space left on image = $free_space KB" >> $LOGFILE
1736    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1737
1738    # make it bootable
1739    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1740    mkdir -p $mountpoint/etc
1741    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1742    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1743    echo -en "..."
1744    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1745
1746    if [ "$retval" -eq "0" ] ; then
1747        echo -en "...$DONE\n"
1748        if [ "$KERN_DISK_MADE" ] ; then
1749            [ "$imagefile" != "" ] && rm -f $imagefile
1750            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1751        fi
1752    else
1753        echo -en "...failed\n"
1754        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1755        [ "$imagefile" != "" ] && rm -f $imagefile
1756    fi
1757    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1758    return $retval
1759}
1760
1761
1762ParseModprobeForIncludes() {
1763local MODPROBE_CONF mpincfile includes include
1764
1765MODPROBE_CONF=/etc/modprobe.conf
1766mpincfile=$1
1767touch $mpincfile
1768if [ -a $MODPROBE_CONF ]; then
1769    includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort|uniq)
1770    if [ -n "$includes" ]; then
1771        for include in $includes
1772        do
1773            if [ -a "$include" ]; then
1774                echo $include >> $mpincfile
1775            fi
1776        done
1777    fi
1778fi
1779}
1780
1781
1782PrepareDataDiskImages() {
1783    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
1784
1785    imagesdir=$MINDI_CACHE
1786    rm -f $imagesdir/mindi.iso
1787    needlist=$MINDI_TMP/what-we-need.txt
1788    bigdir=$MINDI_TMP/bigdir
1789    mkdir -p $bigdir/usr/bin
1790    mkdir -p $bigdir/usr/sbin
1791    includefile=$MINDI_TMP/$$.includefile.txt
1792
1793    lfiles="$DEPLIST_FILE"
1794    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
1795    ParseModprobeForIncludes $includefile
1796    lines=$(($lines+`wc -l $includefile`))
1797    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
1798    res=$?
1799    rm -f $includefile
1800    if [ "$YOUR_KERNEL_SUCKS" ]; then
1801        pwd=`pwd`
1802        cd $MINDI_TMP
1803        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
1804            tar cf - ./$i 2>> $LOGFILE | (cd $bigdir ; tar xf -) || Die "PDDI can't copy $i->$bigdir"
1805        done
1806        for i in $EXTRA_MODS ; do
1807            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1808            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1809            for k in $j ; do
1810                tar cf - $k 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1811                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1812            done
1813        done
1814        cd $pwd
1815    else
1816        ListKernelModulePaths >> $needlist
1817    fi
1818    if [ "$res" -ne "0" ] ; then
1819        Die "You have $res files present in dependency list\nbut absent from filesystem."
1820    fi
1821    FindAndAddUserKeyboardMappingFile
1822    mkdir -p $bigdir/tmp
1823    if [ _"$MONDO_SHARE" != _"" ]; then
1824        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1825        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1826    fi
1827    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1828    DropOptimizedLibraries $needlist $bigdir
1829    echo -en "Assembling dependency files"
1830    CopyDependenciesToDirectory < $needlist $bigdir
1831
1832    # also copy io.sys and msdos.sys, if we can find them
1833    for i in `mount | cut -d' ' -f3` ; do
1834        for j in io.sys msdos.sys ; do
1835            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
1836        done
1837    done
1838
1839    # master boot record, too
1840    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
1841    if [ "$i" ] ; then
1842        LogIt "Backing up $i's MBR"
1843        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
1844        sleep 1
1845        sync
1846        j=$i
1847        [ -h "$j" ] && j=`readlink -f $j`
1848        LogIt "Creating /dev/boot_device ($j)"
1849        mkdir -p $bigdir/dev
1850        cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null || Die "Unable to create /dev/boot_device on ramdisk"
1851    fi
1852
1853    old_pwd=`pwd`
1854    cd $bigdir
1855
1856    # Get terminfo content
1857    ti="usr/share/terminfo/l"
1858    if [ -d /$ti ]; then
1859        mkdir -p $ti
1860        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogIt "WARNING - error occurred while copying terminfo"
1861    fi
1862    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
1863        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
1864        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
1865    fi
1866    [ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE | tar xf -
1867    cd $old_pwd
1868    echo -e "$DONE"
1869    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
1870    MakeMountlist $MINDI_TMP/mountlist.txt
1871    mkdir -p $bigdir/tmp
1872    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
1873    if [ _"$MONDO_SHARE" != _"" ]; then
1874        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
1875    fi
1876    [ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm || LVM="false"
1877    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
1878    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
1879    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
1880    if [ _"$MONDO_SHARE" != _"" ]; then
1881        for q in filelist.full.gz biggielist.txt ; do
1882            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
1883            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
1884        done
1885    fi
1886
1887    echo -en "Tarring and zipping the data content..."
1888    size_of_all_tools=`du -sk $bigdir | cut -f1`
1889    (cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null | gzip -9 > $imagesdir/all.tar.gz)
1890    du -sk $imagesdir/*gz >> $LOGFILE
1891    echo -e "$DONE"
1892
1893    FRIENDLY_OUTSTRING="Boot and data disk images were created."
1894    rm -rf $bigdir
1895    rm -f $needlist
1896}
1897
1898
1899ProcessLDD() {
1900    local incoming f d nd bd bnd
1901    read incoming
1902    while [ "$incoming" != "" ]; do
1903        # We take the full path name of the dyn. lib. we want
1904        incoming=`echo "$incoming" | awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
1905        for f in $incoming ; do
1906            # echo modified file name if one of the parent dir is a link
1907            # by replacing the original dirname by the destination of the link
1908            d="`dirname $f`"
1909            found="false"
1910            while [ "$d" != "/" ]; do
1911                if [ -h "$d" ]; then
1912                    nd=`readlink -f $d`
1913                    bd=`basename $d`
1914                    bnd=`basename $nd`
1915                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
1916                    echo $d
1917                fi
1918                d="`dirname $d`"
1919            done
1920
1921            echo "$f"
1922            echo "`ReadAllLink $f`"
1923        done
1924        read incoming
1925    done
1926}
1927
1928
1929Prompt() {
1930    echo -en "$1"
1931    read line
1932}
1933
1934
1935ReadLine() {
1936    local i incoming
1937    read incoming
1938    i=0
1939    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
1940        i=$(($i+1))
1941        read incoming
1942    done
1943    echo "$incoming"
1944}
1945
1946
1947SizeOfPartition() {
1948    local devpath drive res stub
1949    device=$1
1950    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
1951        res=`SizeOfRaidPartition $device`
1952        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
1953        echo "$res"
1954        return 0
1955    fi
1956    # patch from Bill <bill@iwizard.biz> - 2003/08/25
1957    res=`$FDISK -s $device 2>> $LOGFILE`
1958    # end patch
1959    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2`
1960    [ "$res" = "" ] && res="-1"
1961    echo $res
1962    return 0
1963}
1964
1965
1966SizeOfRaidPartition() {
1967    local real_dev smallest_size silly tmp
1968
1969    silly=999999999
1970    smallest_size=$silly
1971
1972    for real_dev in `GetRaidDevMembers $1` ; do
1973        tmp=`SizeOfPartition $real_dev`
1974        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
1975    done
1976
1977    if [ "$smallest_size" = "$silly" ] ; then
1978        echo "-1"
1979        return 1
1980    else
1981        echo "$smallest_size"
1982        return 0
1983    fi
1984}
1985
1986
1987StripComments()
1988{
1989    local tempfile
1990
1991    tempfile=$MINDI_TMP/$$.strip.txt
1992    cp -f $1 $tempfile 2>> $LOGFILE
1993    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
1994    rm -f $tempfile
1995    echo "Stripped comments from $2" >> $LOGFILE
1996}
1997
1998
1999
2000StripExecutable()
2001{
2002    local tmpfile
2003
2004    tmpfile=$MINDI_TMP/stripped.$$.dat
2005    [ -d "$1" ] || [ -h "$1" ] && return
2006    cp -f $1 $tmpfile 2>> $LOGFILE
2007    strip $tmpfile 2> /dev/null
2008    if [ "$?" -eq "0" ] ; then
2009        cp -f $tmpfile $1 2>> $LOGFILE
2010        echo "Stripped binary $2" >> $LOGFILE
2011    fi
2012    rm -f $tmpfile
2013}
2014
2015
2016TryToFindKernelPath() {
2017    local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2018
2019    we_want_version=`uname -r`
2020    possible_kernels=""
2021    duff_kernels=""
2022   
2023    if [ "$ARCH" = "ia64" ] ; then
2024       root="/boot/efi/efi"
2025    else
2026       root="/"
2027    fi
2028    for fname in `find $root -maxdepth 2 -type f | grep -E 'lin|kern' | grep -Ev '^/proc/|^/net/'` ; do
2029        [ ! -e "$fname" ] && continue
2030        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2031        file $fname | grep -q gzip
2032        if [ "$?" -eq "0" ] ; then
2033            # Used by ia64
2034            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2035        else
2036            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2037        fi
2038        [ "$fkern_ver" = "" ] && continue
2039        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2040        [ -f "$fname" ] || continue
2041        [ -h "$fname" ] && continue
2042        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2043        file $fname | grep -q gzip
2044        if [ "$?" -eq "0" ] ; then
2045            # Used by ia64
2046            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2047                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2048                duff_kernels="$fname $duff_kernels"
2049            else
2050                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2051                possible_kernels="$fname $possible_kernels"
2052            fi
2053        else
2054            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2055                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2056                duff_kernels="$fname $duff_kernels"
2057            else
2058                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2059                possible_kernels="$fname $possible_kernels"
2060            fi
2061        fi
2062    done
2063    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2064        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2065    fi
2066    if [ ! "$possible_kernels" ] ; then
2067        LogIt "No kernel matches exactly. Are there any duff kernels?"
2068        possible_kernels="$duff_kernels"
2069        if [ ! "$possible_kernels" ] ; then
2070            LogIt "Sorry, no duff kernels either"
2071        else
2072            LogIt "I bet you're running Debian or Gentoo, aren't you?"
2073            LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2074        fi
2075    fi
2076    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort -u | tr '\n' ' '`
2077    noof_kernels=`CountItemsIn "$possible_kernels"`
2078    if [ "$noof_kernels" -eq "0" ] ; then
2079        LogIt "Could not find your kernel."
2080        if [ -e "/boot/vmlinuz" ] ; then
2081            LogIt "Using /boot/vmlinuz as a last resort."
2082            output=/boot/vmlinuz
2083        else
2084            output=""
2085        fi
2086    elif [ "$noof_kernels" -eq "1" ] ; then
2087        kernelpath=`echo "$possible_kernels" | sed s/' '//`
2088        echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2089        output="$kernelpath"
2090    else
2091        for i in $possible_kernels ; do
2092            if echo $i | grep "`uname -r`" ; then
2093                LogIt "OK, I used my initiative and found that "
2094                LogIt "$i is probably your kernel. "
2095                output="$i"
2096                return
2097            fi
2098        done
2099        if echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null ; then
2100            output=/boot/vmlinuz
2101            echo "Schlomo, this one's for you." >> $LOGFILE
2102        else
2103            LogIt "Two or more possible kernels found. You may specify any one of them and the "
2104            LogIt "boot disks will still work, probably. If one does not work, try another."
2105            LogIt "$possible_kernels"
2106            echo ""
2107        fi
2108    fi
2109    echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
2110}
2111
2112
2113TurnTgzIntoRdz() {
2114    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2115
2116    tgz_dir_fname=$1
2117    rdz_fname=$2
2118    kernelsize=$3
2119    maxsize=$(($BOOT_SIZE-$kernelsize))
2120    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2121    tempfile=$MINDI_TMP/temp.rd
2122    mountpoint=$MINDI_TMP/mnt1
2123    res=0
2124    echo -en "..."
2125    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2126    echo -en "..."
2127    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2128    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2129    echo -en "..."
2130    mkdir -p $mountpoint
2131    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2132    echo -en "..."
2133    old_pwd=`pwd`
2134    cd $mountpoint
2135    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2136    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2137
2138    cd dev || Die "Can't cd to dev"
2139    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2140    rm -f dev-entries.tgz
2141    cd ..
2142
2143    for w in insmod.static insmod.static.old ; do
2144        s=`which $w 2> /dev/null`
2145        if [ -e "$s" ] ; then
2146            tar cf - $s 2> /dev/null | tar xf -
2147        fi
2148    done
2149
2150    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2151
2152    # Handle the case where busybox and mount are dynamically linked
2153    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2154    if [ $? -eq 0 ]; then
2155        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2156        rm -f bin/mount $MINDI_TMP/busy.lis
2157        mountlis=`grep mount $DEPLIST_FILE`
2158        for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2159            if [ -f $f ]; then
2160                LocateDeps $f >> $MINDI_TMP/busy.lis
2161            fi
2162        done
2163        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null | tar xf -
2164        rm -f $MINDI_TMP/busy.lis
2165    fi
2166
2167    mkdir -p $mountpoint/tmp
2168    # Management of udev (which includes modprobe in rules)
2169    ps auxww | grep -v grep | grep -qw udevd
2170    if [ $? -eq 0 ]; then
2171        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2172        LogIt "udev device manager found"
2173        tar cf - /etc/udev 2> /dev/null | tar xf -
2174        # This avoids NIC remapping if on another machine at restore time on Debian at least
2175        rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2176        tar cf - /lib*/udev 2> /dev/null | tar xf -
2177        if [ -x /sbin/udevd ]; then
2178            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2179            lis=""
2180            # Get only the files which exist in that list
2181            # and potentially their symlink structure
2182            for i in $lis2; do
2183                if [ -h $i ]; then
2184                    j=$i
2185                    while [ -h $j ]; do
2186                        lis="$lis $j"
2187                        j=`readlink $j`
2188                    done
2189                    lis="$lis $j"
2190                elif [ -f $i ]; then
2191                    lis="$lis $i"
2192                fi
2193            done
2194            # And their deps
2195            LocateDeps $lis > $MINDI_TMP/udev.lis
2196            for i in $lis; do
2197                if [ "`echo $i | cut -c1`" = "/" ]; then
2198                    j=`echo $i | cut -c2-`
2199                    [ "$j" != "" ] && rm -f $j
2200                fi
2201            done
2202            tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null | tar xf -
2203            rm -f $MINDI_TMP/udev.lis
2204        else
2205            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2206            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2207            rm -f $mountpoint/tmp/USE-UDEV
2208        fi
2209    fi
2210
2211    # Management of potential HW info (Proliant only at the moment)
2212    rm -rf $MINDI_CACHE/bkphw
2213    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2214    if [ -d $MINDI_CACHE/bkphw ]; then
2215        LogIt "Hardware Information found and saved ..."
2216        cp -rp $MINDI_CACHE/bkphw .
2217        if [ -f $MINDI_CACHE/tools.files ]; then
2218            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2219            LocateDeps $lis > $MINDI_TMP/tools.lis
2220            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null | tar xf -
2221        fi
2222        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2223            mv -f $MINDI_CACHE/mindi-rsthw .
2224            chmod 755 ./mindi-rsthw
2225        fi
2226        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2227    fi
2228
2229    for w in cdrom groovy-stuff ; do
2230        mkdir -p mnt/$w
2231    done
2232
2233    tar cf - /dev/fd0*[1,2][4,7,8]* 2> /dev/null | tar xf -
2234
2235    cd $old_pwd
2236    echo -en "..."
2237    old_pwd=`pwd`
2238    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2239        cd $MINDI_TMP
2240        needed_modules_path=lib/modules/$FAILSAFE_KVER
2241    else
2242        cd /
2243        if [ "${kernelname}" != "" ]
2244        then
2245            needed_modules_path=lib/modules/${kernelname}
2246        else
2247            needed_modules_path=lib/modules/`uname -r`
2248        fi
2249    fi
2250
2251    needed_modules=""
2252    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2253
2254    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2255        # For PXE boot
2256        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2257    fi
2258    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2259        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2260    fi
2261    for i in $DENY_MODS; do
2262        echo "Removing $i from the list of modules to load" >> $LOGFILE
2263        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2264    done
2265
2266    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2267    for i in $list_of_groovy_mods ; do
2268        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2269    done
2270
2271    for i in $needed_modules ; do
2272        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2273        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2274        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2275        tar cf - $i 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy $i to $mountpoint"
2276        # Uncompress modules if not using udev and native modprobe
2277        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2278            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2279                echo "Uncompressing $i" >> $LOGFILE
2280                gunzip -f $mountpoint/$i
2281            fi
2282        fi
2283    done
2284
2285    # Also copy modules.dep in case of udev so that normal modprobe works
2286    tar cf - /$needed_modules_path/modules.dep 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint"
2287
2288    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2289        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2290        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2291        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2292        rm -f $mountpoint/sbin/devfsd
2293    fi
2294    cd $old_pwd
2295    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2296    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2297    rm -f $mountpoint/zero
2298    if [ _"$MONDO_SHARE" != _"" ]; then
2299        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2300        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2301        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null || Die "Cannot copy mountlist to ramdisk"
2302        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2303        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2304        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2305        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2306        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2307        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2308    fi
2309    mkdir -p $mountpoint/proc
2310    echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2311    # Determine what filesystem to use for initrd image
2312    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2313    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2314    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2315    case "$gvFileSystem" in
2316    "ext2fs")
2317        # say what will be used
2318        echo "Creating an ext2 initrd image..." >> $LOGFILE
2319        # kernel expects linuxrc in ext2 filesystem
2320        ( cd $mountpoint && ln -sf sbin/init linuxrc )
2321        # unmount loop filesystem and create image file using the standard approach
2322        umount $mountpoint || Die "Cannot unmount $tempfile"
2323        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2324        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2325        ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2326        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2327        rm -f ${rdz_fname}.tmp
2328        # log that we are done
2329        echo "...done." >> $LOGFILE
2330    ;;
2331    "initramfs")
2332        # say what will be used
2333        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2334        # make sure that cpio is there
2335        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2336        # go into filesystem
2337        cd $mountpoint
2338        # kernel expects init in cpio filesystem
2339        ln -sf sbin/init init
2340        # create cpio image file and unmount loop filesystem
2341        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2342        cd $old_pwd
2343        umount $mountpoint || Die "Cannot unmount $tempfile"
2344        # log that we are done
2345        echo "...done." >> $LOGFILE
2346    ;;
2347    *)
2348        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2349    ;;
2350    esac
2351    if [ "$res" -eq "0" ] ; then
2352        echo -en "..."
2353    else
2354        echo -en "\rMade an rdz WITH ERRORS.           \n"
2355    fi
2356    return 0
2357}
2358
2359
2360##############################################################################
2361#----------------------------------- Main -----------------------------------#
2362##############################################################################
2363
2364# Now we can create what we need
2365mkdir -p $MINDI_TMP
2366
2367# Purge from potential old run
2368if [ _"$MINDI_CACHE" = _"" ]; then
2369    Die "MINDI_CACHE undefined"
2370fi
2371rm -rf $MINDI_CACHE/* 2> /dev/null
2372mkdir -p $MINDI_CACHE
2373
2374if [ "$1" = "--printvar" ] ; then
2375    shift
2376    if [ _"$1" != _"" ] ; then
2377        set | grep -Ew "^$1" | cut -d= -f2
2378    fi
2379    MindiExit 0
2380fi
2381
2382> $LOGFILE
2383echo "mindi v$MINDI_VERSION" >> $LOGFILE
2384echo "$ARCH architecture detected" >> $LOGFILE
2385echo "mindi called with the following arguments:" >> $LOGFILE
2386echo "$@" >> $LOGFILE
2387echo "Start date : `date`" >> $LOGFILE
2388echo "-----------------------------" >> $LOGFILE
2389
2390[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2391
2392# Log some capital variables
2393[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2394echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2395echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2396echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2397[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2398echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2399if [ -f $MINDI_CONFIG ]; then
2400    echo "-----------------------------" >> $LOGFILE
2401    echo " Mindi configuration file    " >> $LOGFILE
2402    echo "-----------------------------" >> $LOGFILE
2403    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2404    echo "-----------------------------" >> $LOGFILE
2405fi
2406
2407
2408trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2409
2410# Sanity checks
2411which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2412which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2413which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2414which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2415if which awk &> /dev/null ; then
2416    if ! which gawk &> /dev/null ; then
2417        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2418    fi
2419fi
2420which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2421[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2422
2423[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2424
2425# Update the PATH variable if incomplete
2426if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2427    PATH=$PATH:/sbin:/usr/sbin
2428    export PATH
2429    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2430    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2431    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2432fi
2433
2434# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2435if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2436    source $MINDI_LIB/FindDistroFailsafe
2437    # Log kernel image
2438    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2439else
2440    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2441fi
2442
2443if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2444    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2445fi
2446
2447### BERLIOS
2448### Fix as it's not mandatory on ia64
2449if [ "$ARCH" = "ia64" ] ; then
2450    if which elilo &> /dev/null ; then
2451        LILO_EXE=elilo
2452    else
2453        LILO_EXE=`which false`
2454    fi
2455else
2456    FindIsolinuxBinary
2457fi
2458trap "Aborted" SIGTERM
2459DONE="\r\t\t\t\t\t\t\t\tDone.         "
2460kernelpath=""
2461MONDO_ROOT=/var/cache/mondo
2462mkdir -p $MONDO_ROOT
2463
2464if [ -d "/proc/lvm" ]; then
2465    # LVM v1
2466    LVMCMD=""
2467    LVM="v1"
2468elif [ -d "/dev/mapper" ]; then
2469    # LVM v2
2470    LVMCMD="lvm"
2471    LVM="v2"
2472else
2473    LVM="false"
2474fi
2475echo "LVM set to $LVM" >> $LOGFILE
2476echo "----------" >> $LOGFILE
2477echo "mount result:" >> $LOGFILE
2478echo "-------------" >> $LOGFILE
2479mount >> $LOGFILE
2480echo "-------------" >> $LOGFILE
2481if [ -e /etc/raidtab ]; then
2482    echo "-------------" >> $LOGFILE
2483    echo "/etc/raidtab content:" >> $LOGFILE
2484    echo "-------------" >> $LOGFILE
2485    cat /etc/raidtab >> $LOGFILE
2486fi
2487echo "-------------" >> $LOGFILE
2488echo "cat /proc/cmdline:" >> $LOGFILE
2489echo "-------------" >> $LOGFILE
2490cat /proc/cmdline >> $LOGFILE
2491echo "-------------" >> $LOGFILE
2492echo "cat /proc/swaps:" >> $LOGFILE
2493echo "-------------" >> $LOGFILE
2494cat /proc/swaps >> $LOGFILE
2495echo "-------------" >> $LOGFILE
2496echo "cat /proc/partitions:" >> $LOGFILE
2497echo "-------------" >> $LOGFILE
2498cat /proc/partitions >> $LOGFILE
2499echo "-------------" >> $LOGFILE
2500echo "cat /proc/filesystems:" >> $LOGFILE
2501echo "-------------" >> $LOGFILE
2502cat /proc/filesystems >> $LOGFILE
2503echo "-------------" >> $LOGFILE
2504echo "lsmod result:" >> $LOGFILE
2505echo "-------------" >> $LOGFILE
2506lsmod >> $LOGFILE
2507MODULES="`cat /proc/modules | awk '{print $1}'`"
2508if [ -x /usr/sbin/esxcfg-module ]; then
2509    echo "-------------" >> $LOGFILE
2510    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2511    echo "-------------" >> $LOGFILE
2512    echo "VMWare modules" >> $LOGFILE
2513    echo "-------------" >> $LOGFILE
2514    /usr/sbin/esxcfg-module -l >> $LOGFILE
2515    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | awk '{print $1}'`"
2516fi
2517echo "FORCE_MODS:" >> $LOGFILE
2518echo "-------------" >> $LOGFILE
2519echo $FORCE_MODS >> $LOGFILE
2520echo "-------------" >> $LOGFILE
2521echo "DENY_MODS:" >> $LOGFILE
2522echo "-------------" >> $LOGFILE
2523echo $DENY_MODS >> $LOGFILE
2524echo "-------------" >> $LOGFILE
2525echo "df result:" >> $LOGFILE
2526echo "----------" >> $LOGFILE
2527df -T >> $LOGFILE
2528echo "-------------" >> $LOGFILE
2529echo "Liste of extra modules is:" >> $LOGFILE
2530echo "$EXTRA_MODS" >> $LOGFILE
2531echo "-------------" >> $LOGFILE
2532
2533# Compute libata version
2534laver=`modinfo libata | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2535# If libata v2 is used then remove ide-generic as it will perturbate boot
2536if [ "`echo $MODULES | grep libata`" ]; then
2537    if [ "$laver" = "2" ]; then
2538        DENY_MODS="$DENY_MODS ide-generic"
2539        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2540        echo "-------------" >> $LOGFILE
2541    fi
2542fi
2543
2544FLOPPY_WAS_MOUNTED=""
2545for mtpt in /media/floppy /mnt/floppy /floppy ; do
2546    if mount | grep -w $mtpt &> /dev/null ; then
2547        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2548        umount $mtpt
2549    fi
2550done
2551
2552#
2553# If we have a USB device we need to store info
2554# and remove it from the parameters line
2555#
2556if [ "$#" -ne "0" ] ; then
2557    if [ "$1" = "--usb" ] ; then
2558        shift
2559        USBDEVICE=$1
2560        if [ _"$USBDEVICE" = _"" ]; then
2561            Die "No USB device specified"
2562        fi
2563        shift
2564    fi
2565fi
2566
2567if [ "$#" -ne "0" ] ; then
2568    if [ "$1" = "--findkernel" ] ; then
2569        res=`TryToFindKernelPath`
2570        # Avoids logfile content for mondo
2571        export MONDO_SHARE=""
2572        if [ "$res" = "" ] ; then
2573            MindiExit -1
2574        else
2575            echo "$res"
2576            MindiExit 0
2577        fi
2578    elif [ "$1" = "--locatedeps" ] ; then
2579        [ ! "$2" ] && Die "Please specify the binary to look at"
2580        LocateDeps $2
2581        # Avoids logfile content for mondo
2582        export MONDO_SHARE=""
2583        MindiExit $?
2584    elif [ "$1" = "--readalllink" ] ; then
2585        [ ! "$2" ] && Die "Please specify the binary to look at"
2586        ReadAllLink $2
2587        # Avoids logfile content for mondo
2588        export MONDO_SHARE=""
2589        MindiExit $?
2590    elif [ "$1" = "--makemountlist" ] ; then
2591        [ ! "$2" ] && Die "Please specify the output file"
2592        MakeMountlist $2
2593        # Avoids logfile content for mondo
2594        export MONDO_SHARE=""
2595        MindiExit $?
2596    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2597        echo "Mindi v$MINDI_VERSION"
2598        # Avoids logfile content for mondo
2599        export MONDO_SHARE=""
2600        MindiExit 0
2601    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2602        MONDO_TMP=$2
2603        # Change MINDI_TMP for the one provided by mondo
2604        # So that it can get back the built files
2605        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2606        rmdir $MINDI_TMP
2607        export MINDI_TMP=$MONDO_TMP
2608        mkdir -p $MINDI_TMP
2609        # This is the scratch dir in mondo - subdir images
2610        MINDI_CACHE=$3
2611        if [ _"$MINDI_CACHE" != _"" ]; then
2612            mkdir -p $MINDI_CACHE
2613        fi
2614        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2615###
2616### Sq-Modification...
2617### Attempt to locate kernel specific module path
2618### if module path is found then use it other wise use uname -r to set it...
2619###
2620        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2621        LogIt "kernelname = $kernelname"
2622        LogIt "kernelpath = $kernelpath"
2623        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2624        then
2625           LogIt "Module path for ${kernelpath} not found..."
2626           LogIt "using running kernel\'s modules."
2627           kernelname=`uname -r`
2628        else
2629           LogIt "Using modules for kernel: ${kernelname}"
2630        fi
2631###
2632### end of Sq-Modification
2633###
2634        TAPEDEV=$5
2635        TAPESIZE=$6
2636        FILES_IN_FILELIST=$7
2637        USE_LZO=$8
2638        CDRECOVERY=$9
2639        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
2640            IMAGE_DEVS=""
2641        else
2642            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
2643        fi
2644        if [ "${11}" ] ; then
2645            LILO_OPTIONS=""
2646    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2647        fi
2648        LAST_FILELIST_NUMBER=${12}
2649        ESTIMATED_TOTAL_NOOF_SLICES=${13}
2650        EXCLUDE_DEVS="${14}"
2651        USE_COMP="${15}"
2652        USE_LILO="${16}"
2653        USE_STAR="${17}"
2654        INTERNAL_TAPE_BLOCK_SIZE="${18}"
2655        DIFFERENTIAL="${19}"
2656        USE_GZIP="${20}"
2657        NOT_BOOT="${21}"
2658        [ "$USE_COMP" = "" ] && USE_COMP=yes
2659        [ "$USE_GZIP" = "" ] && USE_GZIP=no
2660        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2661        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2662        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2663        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2664        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2665        then
2666           LogIt "Module path for ${kernelpath} not found..."
2667           LogIt "using running kernel\'s modules."
2668           kernelname=`uname -r`
2669        else
2670           LogIt "Using modules for kernel: ${kernelname}"
2671        fi
2672        [ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2673        # MONDO_ROOT is the real scratchdir
2674        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
2675        if [ _"$MONDO_ROOT" != _"" ]; then
2676            mkdir -p $MONDO_ROOT
2677        else
2678            Die "MONDO_ROOT is undefined"
2679        fi
2680    else
2681        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2682        MindiExit -1
2683    fi
2684fi
2685[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
2686
2687if [ _"$MONDO_SHARE" = _"" ]; then
2688    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2689    LogIt "Latest Mindi is available from http://www.mondorescue.org"
2690    LogIt "BusyBox sources are available from http://www.busybox.net"
2691    LogIt "------------------------------------------------------------------------------"
2692else
2693    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2694fi
2695if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2696    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
2697else
2698    LogIt "Unable to find mindi-busybox, please install it"
2699    MindiExit -1
2700fi
2701
2702# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2703insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2704for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2705    insmod $i >> $LOGFILE 2>> $LOGFILE
2706done
2707
2708KERN_DISK_MADE=""
2709
2710echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2711echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2712echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2713if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2714    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2715    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2716    MakeMountlist $MINDI_TMP/mountlist.txt
2717    mkdir -p $MINDI_TMP/small-all/tmp
2718    cd $MINDI_TMP/small-all
2719    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null || Die "Cannot copy small all.tar.gz"
2720    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
2721    sleep 2
2722    LogIt "Done. Exiting."
2723    MindiExit 0
2724fi
2725
2726if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2727    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2728fi
2729
2730if [ "$kernelpath" = "" ] ; then
2731    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2732    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2733    read ch
2734    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2735        USE_OWN_KERNEL="yes"
2736    else
2737        USE_OWN_KERNEL="no"
2738    fi
2739    if [ "$USE_OWN_KERNEL" = "yes" ]; then
2740        YOUR_KERNEL_SUCKS=""
2741        kernelpath=`TryToFindKernelPath`
2742        if [ "$kernelpath" = "" ] ; then
2743            echo -n "Please enter kernel path : "
2744            read kernelpath
2745        fi
2746    else
2747        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2748    fi
2749fi
2750if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
2751    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2752    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2753        source $MINDI_LIB/FindDistroFailsafe
2754        # Log kernel image
2755        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2756        kernelpath="$FAILSAFE_KBIN"
2757        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2758        LogIt "The failsafe kernel is $kernelpath.\n"
2759        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2760        LogIt "disks then it may still be a result of a problem with your kernel.\n"
2761        pwd=`pwd`
2762        cd $MINDI_TMP
2763        mkdir -p lib/modules
2764        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
2765        cd $pwd
2766    else
2767        kernelpath=$MINDI_LIB/vmlinuz
2768        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2769        LogIt "However, you are still running your kernel. If Mindi fails to create your"
2770        LogIt "disks then it may still be a result of a problem with your kernel."
2771        pwd=`pwd`
2772        cd $MINDI_TMP
2773        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
2774        cd $pwd
2775    fi
2776    YOUR_KERNEL_SUCKS="Your kernel sucks"
2777fi
2778echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
2779[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
2780
2781[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
2782
2783PrepareDataDiskImages
2784
2785ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2786rds=$(($ramdisk_size-$((ramdisk_size%4096))))
2787export ramdisk_size=$rds
2788
2789echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
2790if [ "$ARCH" = "ia64" ] ; then
2791    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
2792else
2793    PrepareBootDiskImage_SYSLINUX $kernelpath || Die "Failed to create $ramdisk_size MB disk image."
2794fi
2795
2796[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
2797...Or type 'memtest' to test your PC's RAM thoroughly.\n"
2798
2799if [ _"$MONDO_SHARE" = _"" ]; then
2800    ListImagesForUser
2801    OfferToMakeBootableISO
2802    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
2803        OfferToMakeBootableUSB
2804    fi
2805    LogIt "Finished."
2806elif [ "$TAPEDEV" ] ; then
2807    rm -f $MINDI_CACHE/{*img,*iso}
2808    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2809        OfferToMakeBootableUSB
2810    fi
2811    OfferToMakeBootableISO
2812    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
2813        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
2814    else
2815        Die "Cannot find all.tar.gz, to be written to tape"
2816    fi
2817elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2818    OfferToMakeBootableUSB
2819else
2820    OfferToMakeBootableISO
2821fi
2822# cleanup
2823LogIt "$FRIENDLY_OUTSTRING"
2824for mtpt in $FLOPPY_WAS_MOUNTED ; do
2825    mount $mtpt
2826done
2827MindiExit 0
Note: See TracBrowser for help on using the repository browser.