Context Navigation

source: MondoRescue/branches/2.2.7/mindi/mindi@ 1993

Visit:

Last change on this file since 1993 was 1993, checked in by Bruno Cornec, 16 years ago
Fix a problem with 3w_xxx module by using all possible bootbale modules in the CDROM_MODS list, rather than only the loaded one in the SCSI list
Property svn:keywords set to `Rev Id`
File size: 98.4 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 1993 2008-06-27 18:03:27Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[747]	17
[1511]	18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
[747]	19
[1691]	20	MINDI_REV=PBREV
	21	MINDI_VER=PBVER
[747]	22
	23	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	24	MINDI_PREFIX=XXX
	25	MINDI_CONF=YYY
	26	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	27	MINDI_LIB=LLL
[747]	28
[925]	29	# Temporary directory for mindi
	30	TMPDIR=/tmp
	31
[1914]	32	EXTRA_SPACE=49152 # increase if you run out of ramdisk space
[1821]	33	BOOT_SIZE=16384 # size of the boot disk
[747]	34
	35	PROMPT_MAKE_CD_IMAGE="yes"
	36	# Ask if you want to make a CD Image to be written?
	37	# if this is set to 'no', then the image will be created automatically
	38
[1684]	39	PROMPT_MAKE_USB_IMAGE="yes"
	40	# Ask if you want to make a USB Image to be written?
	41	# if this is set to 'no', then the image will be created automatically
	42
[966]	43	USE_OWN_KERNEL="yes"
[747]	44	# If set to "no", you will be prompted for whether or not
	45	# you want to use your own kernel, or the supplied default.
	46	# If "yes" mindi will automatically use your own kernel.
[925]	47
[747]	48	MY_FSTAB=/etc/fstab
	49	TAPE_MODS="ht st osst ide-tape ide_tape"
[1944]	50	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
[747]	51
	52	# ide-probe-mod
[1984]	53	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks amd74xx"
[747]	54	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[1927]	55	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
[1430]	56	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
[1993]	57	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
	58	# Those modules will only go on the backup media, not the boot media.
[1258]	59	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
[1230]	60	# Replace with that line for HP OCMP e.g.
[1828]	61	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
	62	DENY_MODS="kqemu"
[1399]	63	# Force some modules to be included
[1354]	64	FORCE_MODS=""
[925]	65
[747]	66	LOGFILE=/var/log/mindi.log
[1880]	67	MINDI_CACHE=/var/cache/mindi
[747]	68	BOOT_MEDIA_MESSAGE="\
	69	To format and restore all files automatically, type 'nuke' <enter>.\n\
	70	To restore some/all files interactively, type 'interactive' <enter>.\n\
	71	To compare the archives with your filesystem, type 'compare' <enter>.\n\
	72	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
	73	You may add one or more of the following parameters as well:-\n\n\
	74	donteject - mondorestore will not eject the CD; this is useful if, for\n\
	75	instance, your PC's case has a concealed CD-ROM drive\n\
	76	noresize - your mountlist will not be adjusted to use your unallocated\n\
	77	hard disk space\n\
	78	textonly - do not call any Newt library routines; this is unattractive\n\
	79	but valuable if you find your Newt library has bugs in it\n\n\
	80	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
	81	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
	82	"
[925]	83	FDISK=$MINDI_SBIN/parted2fdisk
[747]	84
[925]	85	# Using a config file allow to overwrite some values
	86	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	87	if [ -f $MINDI_CONFIG ]; then
	88	. $MINDI_CONFIG
	89	fi
[1885]	90	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
	91	ISO_CMD="/usr/bin/mkisofs"
	92	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
[925]	93
[1485]	94	# Now we can create what we need
[1486]	95	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
[940]	96
[747]	97	# ----------------------------------------------------------------------------
	98
	99
	100	AbortHere() {
	101	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	102	Die "Program is terminating in response to signal received from OS/user"
	103	}
	104
	105
	106	Aborted() {
	107	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	108	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	109	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
	110	Die "User abort."
	111	}
	112
	113
	114	AddFileToCfgIfExists() {
	115	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	116	}
	117
	118
	119	AddKeyboardMappingFile() {
	120	local mappath r included_list included_item i res ii sss
	121	mappath=$1
	122	KBDEPTH=$(($KBDEPTH+1))
	123	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	124	if [ -e "$bigdir/$mappath" ] ; then
	125	echo "$mappath already added" >> $LOGFILE
	126	return
	127	elif [ -d "$bigdir/$mappath" ] ; then
	128	echo "Cannot add $mappath: it's a directory. Sorry."
	129	return
	130	fi
	131	echo "Added kbd map $mappath" >> $LOGFILE
	132	if [ ! -e "$mappath" ] ; then
[1764]	133	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	134	if [ ! -e "$mappath" ] ; then
[963]	135	LogIt "Cannot add $mappath: kbd map file not found"
[747]	136	return
	137	fi
	138	else
	139	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
	140	fi
	141
	142	mkdir -p $bigdir/etc
[1919]	143	tar cf - $mappath 2>> /dev/null \| (cd $bigdir ; tar xf -) \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
[747]	144	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
	145	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	146	else
	147	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	148	fi
	149	for included_item in $included_list ; do
[925]	150	if [ ! -e "$included_item" ] ; then
[1764]	151	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
	152	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	153	for ii in $sss ; do
[747]	154	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	155	done
	156	else
	157	AddKeyboardMappingFile $included_item
	158	fi
[747]	159	done
	160	}
	161
	162
	163	CopyDependenciesToDirectory() {
[1989]	164	local outdir incoming fname counter d found
[747]	165	outdir=$1
	166	mkdir -p $outdir
	167	incoming=`ReadLine`
	168	counter=0
	169	while [ "$incoming" != "" ] ; do
[1526]	170	# Non absolute file names should not arrive till here => skipped
	171	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
	172	LogIt "Unable to handle $incoming"
	173	incoming=`ReadLine`
	174	continue
	175	fi
	176	# no parent directory of incoming should be a link, copy is not possible in that case
	177	d=`dirname "$incoming"`
	178	found="false"
	179	while [ $d != "/" -a $found = "false" ]; do
	180	[ -h "$d" ] && found="true"
	181	d=`dirname "$d"`
	182	done
	183	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
[747]	184	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
[1526]	185	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[1989]	186	tar cf - $incoming 2> /dev/null \| (cd $outdir ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
	187
	188	# Only uncompress modules if not using udevd
	189	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
	190	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
[925]	191	fi
[1989]	192	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
[925]	193	counter=$(($counter+1))
	194	if [ "$counter" -ge "5" ] ; then
	195	counter=0
	196	echo -en "."
	197	fi
[747]	198	fi
	199	incoming=`ReadLine`
	200	done
	201	}
	202
	203
	204	CountItemsIn() {
	205	local r
	206	r=0
	207	for q in $1 ; do
	208	r=$(($r+1))
	209	done
	210	echo $r
	211	}
	212
	213
[925]	214	# Last function called before exiting
	215	# Parameter is exit code value
[931]	216	MindiExit() {
[925]	217	local my_partitions
[747]	218
[925]	219	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
	220	echo "End date : `date`" >> $LOGFILE
[1335]	221	if [ _"$MONDO_SHARE" != _"" ] ; then
[1349]	222	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[1315]	223	cat $LOGFILE >> /var/log/mondoarchive.log
[1349]	224	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
[1315]	225	fi
[747]	226
[925]	227	cd /
[1636]	228	sync&
[747]	229
[1636]	230	# Unmount what could remain mounted
[925]	231	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
	232	[ "$my_partitions" != "" ] && umount $my_partitions
[940]	233	# Clean temporary files only when standalone mindi
[948]	234	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
[940]	235	rm -Rf $MINDI_TMP
	236	fi
[925]	237	exit $1
	238	}
	239
[747]	240	Die() {
[925]	241	local i
[747]	242	if [ "$1" = "" ] ; then
[963]	243	LogIt "FATAL ERROR"
[747]	244	else
[963]	245	LogIt "FATAL ERROR. $1"
[747]	246	fi
	247
[1315]	248	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
[963]	249	LogIt "See http://www.mondorescue.org for more information."
[747]	250	LogIt "WE CANNOT HELP unless you enclose that file.\n"
[925]	251	MindiExit -1
[747]	252	}
	253
	254
	255	DropOptimizedLibraries() {
	256	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	257	filelist=$1
	258	outdir=$2
	259
	260	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	261	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	262	return 0
[747]	263	fi
	264	echo -en "Dropping i686-optimized libraries if appropriate"
	265	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	266	echo -en "."
	267	reason=""
[1483]	268	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	269	echo "$vanilla_lib_name" >> $filelist
	270	resolved=$vanilla_lib_name
[747]	271	echo "Adding $resolved to filelist" >> $LOGFILE
[861]	272	resolved=`ReadAllLink $resolved`
	273	echo "Adding $resolved to filelist" >> $LOGFILE
[859]	274	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	275	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
	276	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
	277	echo "Excluding $optimized_lib_name" >> $LOGFILE
[935]	278	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
[859]	279	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
	280	echo "$vanilla_lib_name" >> $filelist.tmp
	281	mv -f $filelist.tmp $filelist
[747]	282	done
[925]	283	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	284	mv -f $filelist.tmp $filelist
	285	echo -e "$DONE"
	286	}
	287
	288
	289	FindAndAddUserKeyboardMappingFile() {
	290	local r res mapfile mappath included_item included_list keyfile mp locale
[963]	291	LogIt "Analyzing your keyboard's configuration."
[747]	292	KEYDIR=/lib/kbd
	293	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
	294	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
	295	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
[1713]	296	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
	297	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
[747]	298	if [ ! -e "$KEYDIR" ] ; then
[963]	299	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	300	return 0
	301	fi
	302	if [ -e "/etc/sysconfig/keyboard" ] ; then
	303	echo "Red Hat-style config detected." >> $LOGFILE
	304	keyfile=/etc/sysconfig/keyboard
	305	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
	306	echo "Slackware-style config detected." >> $LOGFILE
	307	keyfile=/etc/rc.d/rc.keymap
	308	elif [ -e "/etc/rc.config" ] ; then
	309	echo "Debian-style config detected." >> $LOGFILE
	310	keyfile=/etc/rc.config
	311	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
	312	echo "Debian-style config detected." >> $LOGFILE
	313	echo -en "Adding the following keyboard mapping tables: "
	314	mkdir -p $bigdir/tmp
	315	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	316	KBDEPTH=0
	317	mkdir -p $bigdir/etc/console
[963]	318	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[747]	319	echo -e "$DONE"
	320	return 0
[1713]	321	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	322	echo "Ubuntu-style config detected." >> $LOGFILE
	323	echo -en "Adding the following keyboard mapping tables: "
	324	mkdir -p $bigdir/tmp
	325	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	326	KBDEPTH=0
	327	mkdir -p $bigdir/etc/console-setup
	328	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
	329	echo -e "$DONE"
	330	return 0
[1465]	331	elif [ -e "/etc/conf.d/keymaps" ] ; then
	332	echo "Gentoo-style config detected." >> $LOGFILE
	333	keyfile=/etc/conf.d/keymaps
[747]	334	else
	335	echo -en "Searching for rc.config ..."
	336	keyfile=`find /etc -name rc.config \| head -n1`
	337	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[963]	338	LogIt "Unknown config detected. Default keyboard map will be used."
[747]	339	return
	340	else
	341	echo "Found $keyfile" >> $LOGFILE
	342	fi
	343	fi
	344	if [ ! -e "$KEYDIR/keymaps" ] ; then
[963]	345	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
[747]	346	return
	347	fi
	348	echo "keyfile=$keyfile" >> $LOGFILE
	349	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
	350	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[1465]	351	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
[747]	352	echo "locale=$locale" >> $LOGFILE
[1764]	353	#
	354	# Process the keymaps dir once for all
	355	# AddKeyboardMappingFile will use it recursively
	356	#
	357	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	358	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	359	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	360	# If we have multiple keymaps then log it !!
	361	echo "$mp" \| grep -q " "
	362	if [ $? -eq 0 ]; then
	363	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
	364	echo "The following one will be used" >> $LOGFILE
	365	fi
	366	for i in $mp ; do
	367	mappath=$i
	368	[ -e "$i" ] && [ ! -d "$i" ] && break
	369	done
	370	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[1854]	371	mappath=$(find / -name "/kbd/keymaps//$locale")
[747]	372	fi
	373	echo "mappath = $mappath" >> $LOGFILE
	374	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[963]	375	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
[747]	376	return
	377	fi
	378	echo -en "Adding the following keyboard mapping tables: "
	379	mkdir -p $bigdir/tmp
	380	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
[1983]	381	KBDElabel=memtest\nPTH=0
[747]	382	AddKeyboardMappingFile $mappath
	383	echo -e "$DONE"
[1764]	384	rm -f $MINDI_TMP/keymaps.find
[747]	385	return 0
	386	}
	387
	388
	389	FindIsolinuxBinary() {
	390	ISOLINUX=/usr/lib/isolinux.bin
	391	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	392	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	393	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	394	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	395	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[1854]	396	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[747]	397	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
	398	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
	399	}
	400
	401
	402	FindSpecificModuleInPath() {
	403	local modpaths pwd line
	404	pwd=`pwd`
	405	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	406	cd $MINDI_TMP
[747]	407	else
	408	cd /
	409	fi
	410	if [ ! -e "$1" ] ; then
[963]	411	LogIt "WARNING - cannot search specific path '$1'"
[747]	412	return 1
	413	fi
	414	modpaths=`find $1 -name $2.*o -type f`
[1815]	415	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
[747]	416	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
	417	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
	418	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
	419	echo "$modpaths"
	420	cd $pwd
	421	}
	422
	423
	424	GenerateGiantDependencyList() {
	425	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
	426
	427	echo -en "Analyzing dependency requirements"
	428	outfile=$1
[940]	429	tempfile=$MINDI_TMP/$$.txt
[747]	430	incoming=`ReadLine`
	431
	432	> $tempfile
	433	progress=0
	434	res=0
	435	noof_lines=$2
	436	while [ "$incoming" != "" ] ; do
[861]	437	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	438	incoming=`ReadLine`
	439	continue
	440	fi
	441	if [ "$incoming" = "LVMFILES:" ] ; then
	442	break
	443	fi
[747]	444	filelist=`GenerateListForFile "$incoming"`
	445	r=$?
[963]	446	[ "$r" -ne "0" ] && LogIt "$incoming not found"
[747]	447	res=$(($res+$r))
[861]	448	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
[747]	449	for fname in $filelist ; do
[861]	450	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	451	done
	452	progress=$(($progress+1))
	453	echo -en "\r\t\t\t\t\t\t\t\t"
	454	i=$(($progress*100))
	455	i=$(($i/$noof_lines))
	456	echo -en "$i"
	457	echo -en "%"
	458	modres=$(($progress%4))
	459	[ "$modres" -eq "0" ] && echo -en "\t/"
	460	[ "$modres" -eq "1" ] && echo -en "\t-"
	461	[ "$modres" -eq "2" ] && echo -en "\t\\"
	462	[ "$modres" -eq "3" ] && echo -en "\t\|"
	463	incoming=`ReadLine`
	464	done
[861]	465	if [ "$incoming" = "LVMFILES:" ] ; then
	466	incoming=`ReadLine`
	467	lvmversion=""
	468	while [ "$incoming" != "" ] ; do
	469	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	470	incoming=`ReadLine`
	471	continue
	472	fi
	473	filelist=`GenerateListForFile "$incoming"`
	474	for tool in $filelist ; do
	475	lvmresolved=`readlink -f $tool`
[1342]	476	if [ "$tool" = "$lvmresolved" ]; then
[861]	477	echo "$tool" >> $tempfile
	478	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	479	if [ "$lvmversion" = "" ] ; then
	480	lvmversion=`$lvmresolved`
	481	echo "$lvmresolved" >> $tempfile
	482	fi
	483	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	484	if [ "$lvmversion" = "200" ]; then
[861]	485	# pvdata and lvmcreate_initrd don't exist in LVM2
	486	case "$toolstripped" in
	487	"pvdata")
	488	continue
	489	;;
	490	"lvmcreate_initrd")
	491	continue
	492	;;
	493	esac
	494	fi
	495	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	496	if [ -e "$toolpath" ] ; then
	497	echo "$toolpath" >> $tempfile
	498	echo "$tool" >> $tempfile
	499	else
	500	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	501	fi
	502	if [ -e "$toolpath" ] ; then
	503	echo "$toolpath" >> $tempfile
	504	echo "$tool" >> $tempfile
	505	else
	506	echo "Where are your LVM-Tools? Couldn't find $tool"
	507	fi
	508	else
	509	echo "$tool" >> $tempfile
	510	fi
	511	done
	512	progress=$(($progress+1))
	513	echo -en "\r\t\t\t\t\t\t\t\t"
	514	i=$(($progress*100))
	515	i=$(($i/$noof_lines))
	516	echo -en "$i"
	517	echo -en "%"
	518	modres=$(($progress%4))
	519	[ "$modres" -eq "0" ] && echo -en "\t/"
	520	[ "$modres" -eq "1" ] && echo -en "\t-"
	521	[ "$modres" -eq "2" ] && echo -en "\t\\"
	522	[ "$modres" -eq "3" ] && echo -en "\t\|"
	523	incoming=`ReadLine`
	524	done
[747]	525	fi
	526	echo -en "$DONE\nMaking complete dependency list"
	527
	528	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	529	mv -f $tempfile.new $tempfile
	530	> $outfile.pre
	531	progress=0
	532	noof_lines=`cat $tempfile \| wc -l`
[1876]	533	echo "---------------------------------" >> $LOGFILE
	534	echo "List of dependencies: " >> $LOGFILE
	535	echo "---------------------------------" >> $LOGFILE
[747]	536	for fname in `cat $tempfile` ; do
[1876]	537	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	538	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	539	progress=$(($progress+1))
[747]	540	echo -en "\r\t\t\t\t\t\t\t\t"
	541	i=$(($progress*100))
	542	i=$(($i/$noof_lines))
	543	echo -en "$i"
	544	echo -en "%"
[925]	545	modres=$(($progress%4))
[747]	546	[ "$modres" -eq "0" ] && echo -en "\t/"
	547	[ "$modres" -eq "1" ] && echo -en "\t-"
	548	[ "$modres" -eq "2" ] && echo -en "\t\\"
	549	[ "$modres" -eq "3" ] && echo -en "\t\|"
	550	done
[1684]	551	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	552	mkdir -p $bigdir/tmp
	553	mkdir -p $bigdir/sbin
	554	mkdir -p $bigdir/bin
[940]	555	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[963]	556	LogIt "\nIncorporating post-nuke tarball"
[925]	557	old_pwd=`pwd`
	558	cd $bigdir
[963]	559	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
[925]	560	cd $old_pwd
[747]	561	fi
[963]	562	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	563	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	564	else
[963]	565	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	566	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[925]	567	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
	568	Die "Odd."
	569	fi
[963]	570	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
[940]	571	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[963]	572	LogIt "Incorporating NFS-related settings"
[925]	573	for r in NFS-* ISO-PREFIX ; do
[963]	574	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[925]	575	echo "Copying $r to ramdisk" >> $LOGFILE
	576	done
	577	fi
[747]	578	fi
[925]	579	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	580	rm -f $tempfile $outfile.pre
	581	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	582	return $res
	583	}
	584
	585
	586	GenerateListForFile() {
	587	local files_found loc fname incoming i res
	588	incoming="$1"
	589	files_found=""
	590	res=0
	591
	592	for fname in $incoming ; do
	593	files_found="$files_found `LocateFile $fname`"
	594	done
	595
	596	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	597	}
	598
	599
	600	# Returns all disk devices which are part of a raid array
	601	GetAllRaidMembers() {
	602	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	603	}
	604
	605
	606	GetFileSizeList() {
	607	local i
	608	for i in `find $1 -type d -o -print` ; do
	609	du -sk $i
	610	done
	611	}
	612
	613
	614	GetHomeDir() {
	615	local res loc
	616	loc=`which $1 2>/dev/null`
	617	res=`file $loc \| $AWK '{print $NF;}'`
	618	dirname $res
	619	}
	620
	621
[1230]	622	# Check kernel filesystem capabilites for accessing initrd image
	623	#
	624	# Interface definition:
	625	# param #1: absolute path to kernel image
	626	GetInitrdFilesystemToUse() {
	627
	628	# interface test: make sure we have one parameter
	629	if [ $# -ne 1 ]; then
	630	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	631	fi
	632
	633	# interface parameters
	634	local lvKernelImage=$1
	635
	636	# local constants (filesystem magic strings)
	637	local lcMagicCramfs="<3>cramfs: wrong magic"
	638	local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
[1730]	639	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
[1230]	640
	641	# local variables
	642	local lvOffset
	643	local lvScanRes
	644	local lvUseFilesystem
	645
	646	# say where we are.
	647	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
	648
	649	# verify that file exists
	650	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	651
[1566]	652	# Kernel may be gzip compressed
[1730]	653	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	654	if [ $? -eq 0 ]; then
[1730]	655	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	656	else
	657	# get offet of gzip magic "1f8b0800" in file
	658	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
	659	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
	660	lvOffset=`expr $lvOffset / 2`
	661	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
[1230]	662
[1566]	663	# scan kernel image for initrd filessystem support
[1730]	664	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	665	fi
[1230]	666
	667	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
[1730]	668	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
[1230]	669	lvUseFilesystem="ext2fs"
[1730]	670	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
[1230]	671	lvUseFilesystem="initramfs"
[1730]	672	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
[1230]	673	lvUseFilesystem="cramfs"
	674	else
	675	lvUseFilesystem="UNSUPPORTED"
	676	fi
	677
	678	# say what we are using
	679	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
	680
	681	# return file system to use
	682	echo "$lvUseFilesystem"
	683
	684	}
	685
[747]	686	# Searches parent raid device of given disk device
	687	# $1: disk device (i.e. /dev/hda1)
	688	GetParentRaidDev() {
	689	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
	690	}
	691
	692
	693	# Searches members of raid device
	694	# $1: raid device (/dev/md...)
	695	GetRaidDevMembers() {
	696	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	697	}
	698
	699
	700	HackPathsToFailsafe() {
	701	local incoming newpath kver stub i pwd
	702	kver=`uname -r`
	703	incoming=`ReadLine`
	704	pwd=`pwd`
[940]	705	cd $MINDI_TMP
[747]	706	while [ "$incoming" != "" ] ; do
[925]	707	stub=`basename $incoming`
	708	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
	709	for i in $newpath ; do
	710	echo "$i"
	711	done
	712	read incoming
[747]	713	done
	714	cd $pwd
	715	}
	716
	717
	718	ListAllPartitions() {
	719	local res currline partition all_partitions ap_orig remaining i j
	720
[1755]	721	grep -vx " #." $MY_FSTAB \| grep -vx " none." \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
[747]	722	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	723	if [ -e "/vmfs/volumes" ]; then
	724	# For VMWare ESX 3 get the device names of these volumes
	725	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
	726	fi
[747]	727	return
	728	}
	729
	730
	731	ListImagesForUser() {
	732	local path fname
[1983]	733	path=$MINDI_CACHE
[747]	734	echo -en "In the directory '$path' you will find the images:-\n"
	735	for fname in `ls $path \| grep -F mindi-` ; do
	736	printf "%19s " $fname
	737	done
	738	echo " "
	739	}
	740
	741
	742	ListKernelModulePaths() {
	743	local module_list module fname oss r kern
	744	oss="/root/oss/modules"
[1399]	745	module_list="$MODULES"
[1230]	746	# Remove unwanted modules from list
	747	for i in $DENY_MODS; do
	748	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1726]	749	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1230]	750	done
[747]	751	###
	752	### Sq-Modification ... Use kernelname for module search path if specified
	753	###
	754	# kern="`uname -r`"
	755	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
	756	then
	757	kern=${kernelname}
	758	else
	759	kern="`uname -r`"
	760	fi
	761	###
	762	### Sq-Mod End
	763	###
	764	for module in $module_list $EXTRA_MODS ; do
	765	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
	766	echo "module $module --> $r" >> $LOGFILE
	767	[ "$r" ] && echo "$r"
	768	[ -f "$oss" ] && find $oss \| grep -F $module
	769	done
	770	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	771	[ -f "$oss" ] && find $oss.* 2> /dev/null
	772	}
	773
[1784]	774	#
	775	# Critical function which computes all dependencies (dyn. lib.)
	776	# for a list of binaries
	777	#
[747]	778	LocateDeps() {
	779	local incoming fname deps
[1724]	780	incoming="$*"
[747]	781	for fname in $incoming ; do
	782	if [ ! -e "$fname" ] ; then
[963]	783	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
[747]	784	if echo $fname \| grep lvm &> /dev/null ; then
	785	echo "This warning only affects you if you are using LVM." >> $LOGFILE
[1399]	786	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[747]	787	echo "I think you are, so please take heed!" >> $LOGFILE
	788	else
	789	echo "I don't think you are, so don't worry about it." >> $LOGFILE
	790	fi
	791	fi
	792	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
	793	echo "$fname is softlink" >> $LOGFILE
	794	else
[1526]	795	ldd $fname 2> /dev/null \| ProcessLDD
[747]	796	fi
	797	done
	798	}
	799
[925]	800
[860]	801	# Give all symlinks recursively of a full path name
	802	ReadAllLink() {
	803	file="$1"
[747]	804
[1883]	805	echo "$file"
[860]	806	if [ ! -h $file ]; then
	807	return 0
	808	fi
[747]	809
[1883]	810	link=`readlink $file`
[862]	811	d=`dirname $file`
[1883]	812	fchar=`echo $link \| cut -c1`
	813	# If mother dir is a link print it
[1230]	814	if [ -h "$d" ]; then
[1784]	815	echo "$d"
[1883]	816	d=`readlink $d`
	817	fi
	818	if [ "$fchar" != "/" ]; then
	819	# Relative or local link
	820	ReadAllLink "$d/$link"
[860]	821	else
[1883]	822	# Absolute path
	823	ReadAllLink $link
[1230]	824	fi
[860]	825	}
	826
[925]	827
[747]	828	LocateFile() {
	829	local i path fname_to_find location output resolved tmp stub cache_id loclist
	830	fname_to_find="$1"
[1526]	831	# It's an absolute path
[747]	832	if echo "$fname_to_find" \| grep -x "/.*" ; then
[859]	833	output="$fname_to_find"
[860]	834	if [ -h "$output" ] ; then
	835	output="`ReadAllLink $output` $output"
	836	fi
[859]	837	echo "$output"
	838	return 0
[747]	839	fi
[1526]	840	# It's not an absolute path
[747]	841	output=""
[1526]	842	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	843	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	844	[ -h "$path" ] && continue
	845	[ ! -e "$path/$fname_to_find" ] && continue
	846	output="$path/$fname_to_find $output"
	847	if [ -h "$path/$fname_to_find" ] ; then
	848	output="`ReadAllLink $path/$fname_to_find` $output"
	849	fi
[747]	850	done
	851	if [ "$output" = "" ] ; then
[860]	852	return 1
[747]	853	fi
	854	echo "$output"
	855	return 0
	856	}
	857
	858
	859	LogIt() {
	860	if [ -e /dev/stderr ] ; then
[925]	861	echo -e "$1" >> /dev/stderr
[747]	862	elif [ -e /usr/bin/logger ] ; then
[925]	863	/usr/bin/logger -s $1
[747]	864	fi
[965]	865	echo -e "$1" >> $LOGFILE
[747]	866	}
	867
	868
	869	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
	870	MakeMondoConfigFile() {
	871	local outfile use_lzo use_comp use_star
	872	outfile=$1
	873	> $outfile
	874	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	875	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	876	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	877	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	878	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	879	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	880	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	881	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[747]	882	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	883	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	884	echo "use-lzo $use_lzo" >> $outfile
[998]	885	echo "use-gzip $use_gzip" >> $outfile
[747]	886	echo "use-star $use_star" >> $outfile
	887	echo "use-comp $use_comp" >> $outfile
	888	echo "datestamp `date`" >> $outfile
	889	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	890	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
	891	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
	892	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
	893	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
	894	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
	895	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
	896	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
	897	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
	898	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	899	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	900	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
	901	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
	902	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	903	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
	904	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
	905	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	906	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	907	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[949]	908	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	909	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
[1948]	910	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
[747]	911	}
	912
	913
	914	MakeMountlist() {
	915	local scratchdir mountlist all_partitions current_partition \
	916	partition_size partition_format outstring partition_number \
	917	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
	918	absolute_partition old_partition_fmt current_lvolume
	919
[967]	920	echo "Your raw fstab file looks like this:" >> $LOGFILE
	921	echo "------------------------------------" >> $LOGFILE
[747]	922	cat $MY_FSTAB >> $LOGFILE
[967]	923	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
	924	echo "-----------------------------------" >> $LOGFILE
[747]	925
	926	# scratchdir, mountlist(OUT)
[940]	927	scratchdir=$MINDI_TMP
[747]	928	mountlist=$1
	929
	930	# NB: partition = device
	931	# NB: mountpt = where the device is mounted
	932
	933	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	934
[1684]	935	[ "$mountlist" != "" ] && rm -Rf $mountlist
[747]	936	> $mountlist
	937	all_partitions=""
	938
	939	if [ $LVM != "false" ]; then
[1885]	940	echo -en "Analyzing LVM...\n"
[968]	941	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	942	if [ $? -ne 0 ]; then
[963]	943	LVM="false"
	944	fi
[968]	945	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
[747]	946	fi
	947	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	948	# echo "all partitions = $all_partitions" > /dev/stderr
	949	for i in $IMAGE_DEVS ; do
	950	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	951	done
	952	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[1755]	953	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
[747]	954	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
	955	for c_p in $all_partitions ; do
	956	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
	957	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	958	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	959	current_partition=`readlink -f $c_p`
[747]	960	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
	961	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	962	else
	963	current_partition="$c_p"
	964	fi
	965	[ "$c_p" = "none" ] && continue
	966	redhat_label=""
[1831]	967	label=""
[957]	968	uuid=""
[861]	969	absolute_partition=`readlink -f $c_p`
[747]	970	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
	971
	972	# Detects noauto partitions not mounted and exclude them
	973	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	974	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	975	continue
	976	fi
	977
[1986]	978	# set default in case we dont't find it
	979	str_to_find_fmt_with=$current_partition
	980
[747]	981	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	982	# current_partition contains only first column of /etc/fstab
	983	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
[980]	984	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	985	actual_dev=""
[853]	986
	987	# 1st try, findfs - the RHEL way of finding labels and their partitions
	988	if [ -x "/sbin/findfs" ]; then
[855]	989	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
[853]	990	fi
[747]	991
[853]	992	# 2nd try : blkid, the good way for all LABEL except swap
	993	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	994	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	995	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	996	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	997	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	998	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	999	for dev in `ls /dev/mapper/*`; do
[963]	1000	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1001	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1002	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1003	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1004	break
	1005	fi
	1006	done
	1007	fi
	1008	fi
	1009
[853]	1010	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1011	# For LVM gives a /dev/mapper entry
	1012	if [ "x$actual_dev" = "x" ]; then
[980]	1013	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1014	fi
	1015
[853]	1016	# 4th try, with vol_id
[747]	1017	# SWAP only
	1018	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1019	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1020	for dev_swap in $list_swaps ; do
	1021	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
	1022	if [ "x$dev_exists" != "x" ]; then
	1023	actual_dev=$dev_swap
	1024	break;
	1025	fi
	1026	done
	1027	fi
	1028
[853]	1029	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1030	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1031	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1032	# SWAP only
[789]	1033	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[853]	1034	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1035	do
	1036	# Location of the swap label for kernel 2.6
[1009]	1037	try_dev_label=`dd bs=1 count=16 skip=1052 if=$try_dev 2> /dev/null`
[853]	1038	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1039	actual_dev=$try_dev
[853]	1040	fi
	1041	done
[747]	1042	fi
[1008]	1043
	1044	# Check if one of all those tries has known success
	1045	if [ "x$actual_dev" != "x" ]; then
	1046	current_partition=$actual_dev
	1047	else
[1885]	1048	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1049	fi
[957]	1050	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1051	# current_partition contains only first column of /etc/fstab
[1009]	1052	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
[980]	1053	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1054	actual_dev=""
	1055
	1056	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1057	if [ -x "/sbin/findfs" ]; then
	1058	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1059	fi
	1060
[1531]	1061	# 2nd try : blkid, the good way for all UUID except swap
[957]	1062	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	1063	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1064	# For LVM FS it will give a /dev/dm-# which should then be converted
	1065	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1066	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1067	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1068	for dev in `ls /dev/mapper/*`; do
[963]	1069	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1070	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1071	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1072	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1073	break
	1074	fi
	1075	done
	1076	fi
	1077	fi
	1078
	1079	# 3th try, with vol_id
	1080	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1081	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1082	for dev in $list_dev ; do
	1083	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
	1084	if [ "x$dev_exists" != "x" ]; then
	1085	actual_dev=$dev
	1086	break;
	1087	fi
	1088	done
	1089	fi
	1090
[1531]	1091	# 4th try, with dumpuuid (VMWare only ?) for swap
	1092	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
	1093	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
	1094	for dev in $list_dev ; do
	1095	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
	1096	if [ "x$dev_exists" != "x" ]; then
	1097	actual_dev=$dev
	1098	break;
	1099	fi
	1100	done
	1101	fi
	1102
[747]	1103	# Check if one of all those tries has known success
	1104	if [ "x$actual_dev" != "x" ]; then
	1105	current_partition=$actual_dev
	1106	else
[1315]	1107	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[747]	1108	fi
	1109	else
[1863]	1110	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1111	# they use symlinks in fstab unrelated to what is shown in mount !
	1112	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1113	# set default in case we dont't find it
[1863]	1114	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -Ev "^#" \| $AWK '{print $1}'`; do
[1864]	1115	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
[1863]	1116	str_to_find_fmt_with=$tmpp
[1865]	1117	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$tmpp" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1118	break;
[1863]	1119	fi
	1120	done
	1121	fi
[747]	1122	fi
	1123
	1124	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
	1125	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1126	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1127	# the former is then a link to the latter, so we test whether
	1128	# $current_partition is actually such a link or not and set
[755]	1129	# $current_lvolume accordingly. On Debian you may find more than one answer
	1130	# so we remove the one corresponding to /dev/.static
	1131	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1132	# principle is the same and we need to find the link to it as well.
	1133	# Note that $current_lvolume may well be an
[747]	1134	# ordinary device. It is just to make sure that we feed the right value
	1135	# into any of the LVM tools if possible.
	1136
	1137	current_lvolume="$current_partition"
[763]	1138	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1139	# .static dir are a Debian specificity
[763]	1140	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1141	echo $current_lvolume \| grep -q ' '
[784]	1142	if [ $? -eq 0 ]; then
[755]	1143	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
	1144	fi
[747]	1145	fi
	1146	#
	1147	# End of LVM device style variation code (other than $current_lvolume).
	1148
[745]	1149	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1150	# Size computed via LVM not directly
[747]	1151	partition_size="lvm"
	1152	else
	1153	partition_size=`SizeOfPartition $current_partition`
	1154	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1155	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1156	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
	1157	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
	1158	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
	1159	[ "$partition_format" != "swap" ] && partition_format="swap"
	1160	if [ "$partition_size" = "" ] ; then
	1161	totalsize=0
	1162	items=0
	1163	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
	1164	totalsize=$(($totalsize+$i))
	1165	items=$(($items+1))
	1166	done
	1167	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1168	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1169	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
	1170	fi
	1171	fi
	1172	fi
	1173	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1174	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1175	if [ "$partition_mountpt" = "" ] ; then
	1176	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1177	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1178	partition_mountpt="raid"
	1179	partition_format="raid"
	1180	else
	1181	partition_mountpt="lvm"
	1182	partition_format="lvm"
	1183	fi
	1184	fi
	1185	fi
	1186	psz=$partition_size
	1187	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
	1188	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1189	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1190	partition_mountpt="image"
	1191	old_partition_fmt=$partition_format
	1192	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1193	partition_size=$(($partition_size+1)); # just in case
	1194	if [ "$partition_format" = "Linux" ] ; then
	1195	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
	1196	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
	1197	partition_format=$old_partition_fmt
	1198	fi
	1199	fi
	1200	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
	1201	echo "Excluding $current_partition from mountlist" >> $LOGFILE
	1202	continue
	1203	fi
	1204	if [ ! "$partition_mountpt" ] ; then
[965]	1205	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
[1883]	1206	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1207	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1208	[ "$partition_format" ] && break
	1209	done
[965]	1210	echo "------- $FDISK log end ------------" >> $LOGFILE
[747]	1211	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1212	partition_format="compaq"
	1213	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[963]	1214	LogIt "Unable to find mountpoint of $current_partition - ignoring"
[747]	1215	continue
	1216	fi
	1217	fi
[1755]	1218	if [ "$redhat_label" ]; then
	1219	label="$redhat_label"
[1756]	1220	elif [ "$uuid" ]; then
[1755]	1221	label="$uuid"
	1222	fi
[747]	1223	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1224	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[1755]	1225	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1226	if [ "$current_partition" = "" ] ; then
	1227	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
	1228	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1229	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1230	partition_mountpt=raid
	1231	partition_format=raid
[1755]	1232	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1233	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1234	else
	1235	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
	1236	fi
	1237	elif [ "$partition_format" = "" ] ; then
	1238	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
	1239	elif [ "$partition_size" = "" ] ; then
	1240	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
	1241	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1242	continue
	1243	else
	1244	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
	1245	echo "Stupid bastard..." >> $LOGFILE
	1246	partition_format="vfat"
	1247	fi
[1755]	1248	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1249	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1250	fi
	1251	done
	1252	}
	1253
	1254
	1255	MakeSureNumberIsInteger() {
	1256	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
	1257	if [ "$res" != " " ] && [ "$res" != "" ] ; then
	1258	echo "result = '$res'"
	1259	Die "$1 should be an integer"
	1260	fi
	1261	}
	1262
	1263
	1264	OfferToMakeBootableISO() {
	1265	local i old_pwd
[1684]	1266	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[966]	1267	echo -en "Shall I make a bootable CD image? (y/[n]) "
[747]	1268	read i
	1269	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1270	fi
[1885]	1271	if [ _"$MINDI_TMP" = _"" ]; then
	1272	Die "MINDI_TMP undefined"
[747]	1273	fi
[940]	1274	rm -Rf $MINDI_TMP/iso
[1983]	1275	mkdir -p $MINDI_TMP/iso/{images,archives}
	1276	cp -f $MINDI_CACHE/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/.gz to $MINDI_TMP/iso/images"
[747]	1277	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1278	for i in memdisk memtest.bin memtest.img ; do
[953]	1279	j=$MINDI_LIB/$i
[1983]	1280	k=$MINDI_TMP/iso
[953]	1281	if [ -e "$j" ] ; then
[963]	1282	LogIt "Copying $j to $k"
[953]	1283	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1284	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
[1885]	1285	if [ _"$MONDO_SHARE" != _"" ]; then
	1286	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
	1287	fi
[953]	1288	fi
[747]	1289	done
[1983]	1290	MakeMessageFile > $MINDI_TMP/iso/message.txt
	1291	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
	1292	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
[1885]	1293	if [ _"$MONDO_SHARE" != _"" ]; then
[1929]	1294	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
[1983]	1295	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
[1885]	1296	fi
[1983]	1297	MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
[747]	1298	if [ "$ARCH" != "ia64" ] ; then
[1983]	1299	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
[747]	1300	fi
[1983]	1301	old_pwd=`pwd`
[940]	1302	cd $MINDI_TMP/iso
[747]	1303	if [ "$ARCH" != "ia64" ] ; then
[1885]	1304	if [ _"$MONDO_SHARE" != _"" ]; then
[1983]	1305	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
	1306	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
[1885]	1307	fi
[1983]	1308	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1309	else
[1983]	1310	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
[1950]	1311	rm -f images/mindi-bootroot.$BOOT_SIZE.img
[747]	1312	fi
	1313	if [ "$?" -ne "0" ] ; then
[1885]	1314	echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
[940]	1315	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
[1885]	1316	echo "$ISO_CMD returned the following errors:-"
[940]	1317	cat $MINDI_TMP/mkisofs.log
[963]	1318	LogIt "Failed to create ISO image."
[747]	1319	else
[1880]	1320	echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" \| tee -a $LOGFILE
[747]	1321	fi
[940]	1322	rm -f $MINDI_TMP/mkisofs.log
[747]	1323	cd $old_pwd
	1324	}
	1325
	1326
[1684]	1327	OfferToMakeBootableUSB() {
	1328	local i old_pwd
	1329	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[1786]	1330	echo -n "Shall I make a bootable USB image ? (y/[n]) "
[1764]	1331	read i
	1332	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1333	if [ "$USBDEVICE" = "" ]; then
	1334	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1335	read dev
	1336	USBDEVICE=$dev
[1722]	1337	fi
[1764]	1338	echo "WARNING: This will erase all content on $USBDEVICE"
	1339	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
[1684]	1340	fi
	1341	if [ _"$MINDI_TMP" = _"" ]; then
	1342	Die "MINDI_TMP undefined"
	1343	fi
	1344	rm -Rf $MINDI_TMP/usb
	1345	mkdir -p $MINDI_TMP/usb
	1346	USBPART="${USBDEVICE}1"
	1347
	1348	echo -en "Transforming $USBDEVICE in a Bootable device "
	1349	echo -en "."
	1350	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
	1351	echo "Checking $USBDEVICE" >> $LOGFILE
[1857]	1352	$FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
[1684]	1353	if [ $? -ne 0 ]; then
	1354	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
	1355	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1356	exit -1
	1357	fi
	1358	echo -en "."
[1691]	1359	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
[1721]	1360	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[1684]	1361	echo "Erasing $USBDEVICE" >> $LOGFILE
[1721]	1362	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
[1684]	1363	d
	1364	d
	1365	d
	1366	d
	1367	n
	1368	p
	1369	1
	1370
	1371
	1372	t
	1373	b
	1374	a
	1375	1
	1376	w
	1377	EOF
	1378	if [ $? -ne 0 ]; then
	1379	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
	1380	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1381	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1382	MindiExit -1
	1383	fi
	1384	echo -en "."
	1385	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
[1688]	1386	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
[1684]	1387	if [ $? -ne 0 ]; then
	1388	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
	1389	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
	1390	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1391	MindiExit -1
	1392	fi
	1393	echo -en "."
	1394	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
	1395	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
	1396	if [ $? -ne 0 ]; then
	1397	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
	1398	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
	1399	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1400	MindiExit -1
	1401	fi
	1402	echo -en "."
[1691]	1403	mkdir -p $MINDI_TMP/usb/images
[1983]	1404	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
[1684]	1405	echo -en "."
	1406	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1407	for i in memdisk memtest.bin memtest.img ; do
	1408	j=$MINDI_LIB/$i
	1409	k=$MINDI_TMP/usb
	1410	if [ -e "$j" ] ; then
	1411	LogIt "Copying $j to $k"
	1412	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1413	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
	1414	fi
	1415	done
	1416	echo -en "."
[1983]	1417	MakeMessageFile > $MINDI_TMP/usb/message.txt
[1684]	1418	echo -en "."
[1983]	1419	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
[1684]	1420	echo -en "."
[1983]	1421	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
[1684]	1422	echo -en "."
[1983]	1423	MakeBootConfFile syslinux > syslinux.cfg
[1684]	1424	echo -en "."
[1721]	1425	umount $MINDI_TMP/usb
[1684]	1426	if [ "$ARCH" != "ia64" ] ; then
	1427	syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
	1428	if [ "$?" -ne "0" ] ; then
	1429	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
	1430	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
	1431	LogIt "Failed to create USB image."
	1432	else
	1433	echo -e "$DONE"
	1434	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
	1435	fi
	1436	rm -f $MINDI_TMP/syslinux.log
	1437	else
	1438	echo "No USB boot support for ia64" \| tee -a $LOGFILE
	1439	MindiExit -1
	1440	fi
	1441	echo -en "."
	1442	}
	1443
	1444
[747]	1445	MakeMessageFile() {
[1983]	1446	iss="/dev/null"
	1447	[ -e /etc/issue ] && iss="/etc/issue"
	1448	[ -e /etc/issue.net ] && iss="/etc/issue.net"
	1449	if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
	1450	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
[747]	1451	else
[1983]	1452	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
[747]	1453	fi
[1885]	1454	if [ _"$MONDO_SHARE" != _"" ]; then
	1455	if [ "$CDRECOVERY" != "yes" ] ; then
	1456	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
	1457	echo -en "Press <enter> to continue.\n"
	1458	elif [ ! "$MINDI_TMP" ] ; then
	1459	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
[1983]	1460	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1461	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1462	fi
[1885]	1463	else
	1464	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1465	fi
[1983]	1466	else
	1467	echo -en "\
[747]	1468	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1469	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1470	fi
[747]	1471	fi
	1472	echo -en "\n\n\n"
	1473	}
	1474
	1475
[1983]	1476	MakeBootConfFile() {
[1885]	1477	local options i ooo
[747]	1478	options=""
[1983]	1479	# Type of boot file (elilo or syslinux/isolinux)
	1480	type=$1
	1481	if [ "$type" = "elilo" ]; then
	1482	sep="="
	1483	else
	1484	sep=" "
	1485	fi
[925]	1486
[1983]	1487	# Generic header for conf file
	1488	if [ "$type" != "elilo" ] ; then
	1489	echo -en "prompt 1\ndisplay message.txt\n"
	1490	else
	1491	echo -en "prompt\n"
[925]	1492	fi
[1983]	1493
	1494	# Compute which default option to boot from
[747]	1495	if [ "$CDRECOVERY" = "yes" ] ; then
[1983]	1496	echo -en "default${sep}RESTORE\n"
	1497	# In case it's mondoarchive
[1885]	1498	elif [ _"$MONDO_SHARE" != _"" ]; then
[940]	1499	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[1983]	1500	echo -en "default${sep}iso\n"
[747]	1501	else
[1983]	1502	echo -en "default${sep}interactive\n"
[747]	1503	fi
	1504	else
[1983]	1505	echo -en "default${sep}expert\n"
[747]	1506	fi
	1507
[1983]	1508	# Handle timeout
[747]	1509	if [ "$CDRECOVERY" != "yes" ] ; then
[1983]	1510	echo -en "timeout${sep}300\n"
	1511	else
	1512	echo -en "timeout${sep}10000\n"
[747]	1513	fi
	1514	echo -en "\n"
[1983]	1515
	1516	# prepare which labels will be generted
[747]	1517	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	1518	options="RESTORE expert"
[1885]	1519	else
	1520	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1521	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	1522	options="iso"
	1523	else
	1524	options="interactive expert compare iso nuke isonuke"
	1525	fi
	1526	else
	1527	options="expert"
[925]	1528	fi
[747]	1529	fi
[1983]	1530
	1531	# Generate rest of conf file
[747]	1532	for i in $options ; do
[925]	1533	ooo=$i
	1534	[ "$ooo" = "RESTORE" ] && ooo="nuke"
[1983]	1535	if [ "$type" = "elilo" ]; then
	1536	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
[925]	1537	else
[1983]	1538	outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
[925]	1539	fi
[1885]	1540	echo -en "$outstr"
[747]	1541	done
[1983]	1542
	1543	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1544	if [ "$type" = "elilo" ]; then
	1545	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
	1546	echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
	1547	else
	1548	echo -en "label memtest\n\tkernel /memtest.bin\n"
	1549	echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
	1550	fi
	1551	fi
[747]	1552	}
	1553
	1554
	1555	PrepareBootDiskImage_LILO() {
[1983]	1556	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
	1557	imagesdir=$MINDI_CACHE
	1558	kernelpath=$1
[747]	1559
	1560	retval=0
	1561	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1562	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1563	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1564	echo -en "..."
[1885]	1565	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1566	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1567	mkdir -p $mountpoint
[1885]	1568	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[1983]	1569	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
	1570	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[964]	1571	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1572	mkdir -p $mountpoint/etc
[1983]	1573	liloconf=$mountpoint/elilo.conf
[747]	1574
[1983]	1575	MakeBootConfFile elilo > $liloconf
[747]	1576
[1230]	1577	# Copy it so that CD-ROM menu entry is satisfied
[1983]	1578	mountefi=0
	1579	df -T \| grep /boot/efi \| grep -q vfat
	1580	if [ $? -ne 0 ]; then
	1581	mount /boot/efi
[1230]	1582	if [ $? -ne 0 ]; then
[1983]	1583	echo "You have to mount your EFI partition when using mindi"
	1584	MindiExit -1
[1230]	1585	fi
[1983]	1586	mountefi=1
[1230]	1587	fi
[1983]	1588	el=`find /boot/efi -name elilo.efi`
	1589	cp $el $mountpoint
	1590	cp $liloconf $mountpoint
	1591	if [ $mountefi -eq 1 ]; then
	1592	umount /boot/efi 2>&1 > /dev/null
	1593	fi
[1230]	1594
[1983]	1595	echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
	1596	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
[747]	1597	if [ "$?" -ne "0" ] ; then
[1983]	1598	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1599	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1600	LogIt "Please unload some of your modules and try again."
[940]	1601	rm -f $MINDI_TMP/mtpt.$$
[1983]	1602	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1603	retval=$(($retval+1))
	1604	fi
[1983]	1605	MakeMessageFile > $mountpoint/message.txt
[747]	1606
	1607	mkdir -p $mountpoint/tmp
[1983]	1608	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1609	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
[747]	1610	fi
	1611
[925]	1612	# copy the kernel across
[1230]	1613	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1614	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1615	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1616	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
[1885]	1617	if [ "$?" -ne "0" ] ; then
[925]	1618	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1619	du -sk $mountpoint/* >> $LOGFILE
	1620	echo "--- end of list of files ---" >> $LOGFILE
	1621	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1622	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[747]	1623	rm -f $mountpoint/vmlinuz
[925]	1624	cd $old_pwd
[747]	1625	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1626	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[925]	1627	# losetup /dev/loop0 -d
	1628	rm -f $imagefile
[1885]	1629	return 0
[747]	1630	fi
[1796]	1631	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1632	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1633	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1634	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[1794]	1635	# make it bootable
[747]	1636	rm -f $mountpoint/zero
[963]	1637	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[1983]	1638	if [ "$KERN_DISK_MADE" ] ; then
[925]	1639	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
[747]	1640	fi
[925]	1641
[963]	1642	cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
[1983]	1643	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
[747]	1644	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1645	echo -en "..."
[963]	1646	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1647	if [ "$retval" -eq "0" ] ; then
[1885]	1648	echo -en "...$DONE\n"
[747]	1649	if [ "$KERN_DISK_MADE" ] ; then
[1885]	1650	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1651	fi
	1652	else
[1885]	1653	echo -en "...failed\n"
	1654	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[747]	1655	rm -f $imagefile
	1656	fi
[963]	1657	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1658	return $retval
	1659	}
	1660
	1661
	1662	PrepareBootDiskImage_SYSLINUX() {
[1983]	1663	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
	1664	imagesdir=$MINDI_CACHE
	1665	kernelpath=$1
[747]	1666	do_boot_root_thingy=""
	1667	local retval old_pwd
	1668	retval=0
[925]	1669
[747]	1670	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1671	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1672	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1673	echo -en "..."
[1885]	1674	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1675	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1676	mkdir -p $mountpoint
[1885]	1677	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
	1678	echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
	1679	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
	1680	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
	1681
[963]	1682	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[925]	1683
	1684	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[1983]	1685	MakeMessageFile > $mountpoint/message.txt
	1686	MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
	1687	echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
	1688	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
[747]	1689	if [ "$?" -ne "0" ] ; then
[1983]	1690	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1691	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1692	LogIt "Please unload some of your modules and try again."
[940]	1693	rm -f $MINDI_TMP/mtpt.$$
[1983]	1694	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1695	retval=$(($retval+1))
	1696	fi
	1697
	1698	mkdir -p $mountpoint/tmp
[1983]	1699	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1700	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
	1701	fi
[747]	1702
[925]	1703	# copy the kernel across
[1230]	1704	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1705	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1706	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1707	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
[1885]	1708	if [ "$?" -ne "0" ] ; then
[747]	1709	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1710	du -sk $mountpoint/* >> $LOGFILE
	1711	echo "--- end of list of files ---" >> $LOGFILE
	1712	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1713	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[747]	1714	rm -f $mountpoint/vmlinuz
	1715	cd $old_pwd
	1716	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1717	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1718
	1719	rm -f $imagefile
[1885]	1720	return 0
[747]	1721	fi
[1796]	1722	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1723	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1724	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1725	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[925]	1726
	1727	# make it bootable
[747]	1728	rm -f $mountpoint/zero
	1729	mkdir -p $mountpoint/etc
[963]	1730	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[747]	1731	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1732	echo -en "..."
[963]	1733	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1734
	1735	if [ "$retval" -eq "0" ] ; then
[1885]	1736	echo -en "...$DONE\n"
[747]	1737	if [ "$KERN_DISK_MADE" ] ; then
	1738	rm -f $imagefile
[1885]	1739	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1740	fi
	1741	else
[1885]	1742	echo -en "...failed\n"
	1743	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[747]	1744	rm -f $imagefile
	1745	fi
[963]	1746	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1747	return $retval
	1748	}
	1749
	1750
	1751	PrepareDataDiskImages() {
[1902]	1752	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles
[747]	1753
[1983]	1754	imagesdir=$MINDI_CACHE
[1902]	1755	rm -f $imagesdir/mindi.iso
[940]	1756	needlist=$MINDI_TMP/what-we-need.txt
	1757	bigdir=$MINDI_TMP/bigdir
[747]	1758	mkdir -p $bigdir/usr/bin
[1983]	1759	mkdir -p $bigdir/usr/sbin
[747]	1760
[1885]	1761	lfiles="$DEPLIST_FILE"
	1762	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
	1763	cat $lfiles \| GenerateGiantDependencyList $needlist $lines
[747]	1764	res=$?
	1765	if [ "$YOUR_KERNEL_SUCKS" ]; then
[925]	1766	pwd=`pwd`
[940]	1767	cd $MINDI_TMP
[747]	1768	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
[1914]	1769	tar cf - ./$i 2>> $LOGFILE \| (cd $bigdir ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir"
[747]	1770	done
[925]	1771	for i in $EXTRA_MODS ; do
[1810]	1772	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
	1773	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
[925]	1774	for k in $j ; do
[1989]	1775	tar cf - $k 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
[925]	1776	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
	1777	done
	1778	done
	1779	cd $pwd
[747]	1780	else
[925]	1781	ListKernelModulePaths >> $needlist
[747]	1782	fi
	1783	if [ "$res" -ne "0" ] ; then
[1902]	1784	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	1785	fi
	1786	FindAndAddUserKeyboardMappingFile
	1787	mkdir -p $bigdir/tmp
[1885]	1788	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1789	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	1790	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
[747]	1791	fi
	1792	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
	1793	DropOptimizedLibraries $needlist $bigdir
	1794	echo -en "Assembling dependency files"
	1795	CopyDependenciesToDirectory < $needlist $bigdir
	1796
[925]	1797	# also copy io.sys and msdos.sys, if we can find them
[747]	1798	for i in `mount \| cut -d' ' -f3` ; do
[925]	1799	for j in io.sys msdos.sys ; do
[963]	1800	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	1801	done
[747]	1802	done
	1803
[925]	1804	# master boot record, too
[940]	1805	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[747]	1806	if [ "$i" ] ; then
[963]	1807	LogIt "Backing up $i's MBR"
[925]	1808	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	1809	sleep 1
	1810	sync
	1811	j=$i
	1812	[ -h "$j" ] && j=`readlink -f $j`
[963]	1813	LogIt "Creating /dev/boot_device ($j)"
[925]	1814	mkdir -p $bigdir/dev
[953]	1815	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	1816	fi
	1817
	1818	old_pwd=`pwd`
	1819	cd $bigdir
	1820
[1983]	1821	# Get terminfo content
	1822	ti="usr/share/terminfo/l"
	1823	if [ -d /$ti ]; then
	1824	mkdir -p $ti
	1825	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while copying terminfo"
[747]	1826	fi
[1764]	1827	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[747]	1828	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
[1335]	1829	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[747]	1830	fi
[1914]	1831	[ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE \| tar xf -
[747]	1832	cd $old_pwd
	1833	echo -e "$DONE"
	1834	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	1835	MakeMountlist $MINDI_TMP/mountlist.txt
[1902]	1836	mkdir -p $bigdir/tmp
	1837	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	1838	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	1839	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	1840	fi
[1902]	1841	[ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm \|\| LVM="false"
	1842	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
	1843	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
	1844	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
	1845	if [ _"$MONDO_SHARE" != _"" ]; then
	1846	for q in filelist.full.gz biggielist.txt ; do
	1847	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	1848	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	1849	done
	1850	fi
	1851
	1852	echo -en "Tarring and zipping the data content..."
	1853	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	1854	(cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null \| gzip -9 > $imagesdir/all.tar.gz)
	1855	du -sk $imagesdir/*gz >> $LOGFILE
	1856	echo -e "$DONE"
	1857
[747]	1858	FRIENDLY_OUTSTRING="Boot and data disk images were created."
[1902]	1859	rm -rf $bigdir
[747]	1860	rm -f $needlist
	1861	}
	1862
	1863
	1864	ProcessLDD() {
[1784]	1865	local incoming f d nd bd bnd
[747]	1866	read incoming
[1784]	1867	while [ "$incoming" != "" ]; do
[859]	1868	# We take the full path name of the dyn. lib. we want
[1526]	1869	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
	1870	for f in $incoming ; do
[1784]	1871	# echo modified file name if one of the parent dir is a link
	1872	# by replacing the original dirname by the destination of the link
	1873	d="`dirname $f`"
	1874	found="false"
	1875	while [ "$d" != "/" ]; do
	1876	if [ -h "$d" ]; then
	1877	nd=`readlink -f $d`
	1878	bd=`basename $d`
	1879	bnd=`basename $nd`
	1880	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
	1881	echo $d
	1882	fi
	1883	d="`dirname $d`"
	1884	done
	1885
[1721]	1886	echo "$f"
	1887	echo "`ReadAllLink $f`"
[747]	1888	done
	1889	read incoming
	1890	done
	1891	}
	1892
	1893
	1894	Prompt() {
	1895	echo -en "$1"
	1896	read line
	1897	}
	1898
	1899
	1900	ReadLine() {
	1901	local i incoming
	1902	read incoming
	1903	i=0
	1904	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	1905	i=$(($i+1))
	1906	read incoming
[747]	1907	done
	1908	echo "$incoming"
	1909	}
	1910
	1911
	1912	SizeOfPartition() {
	1913	local devpath drive res stub
	1914	device=$1
	1915	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	1916	res=`SizeOfRaidPartition $device`
	1917	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	1918	echo "$res"
	1919	return 0
[747]	1920	fi
[925]	1921	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	1922	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	1923	# end patch
[1796]	1924	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
[747]	1925	[ "$res" = "" ] && res="-1"
	1926	echo $res
	1927	return 0
	1928	}
	1929
	1930
	1931	SizeOfRaidPartition() {
	1932	local real_dev smallest_size silly tmp
	1933
	1934	silly=999999999
	1935	smallest_size=$silly
	1936
	1937	for real_dev in `GetRaidDevMembers $1` ; do
[925]	1938	tmp=`SizeOfPartition $real_dev`
	1939	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	1940	done
	1941
	1942	if [ "$smallest_size" = "$silly" ] ; then
[925]	1943	echo "-1"
	1944	return 1
[747]	1945	else
[925]	1946	echo "$smallest_size"
	1947	return 0
[747]	1948	fi
	1949	}
	1950
	1951
	1952	StripComments()
	1953	{
	1954	local tempfile
[925]	1955
[940]	1956	tempfile=$MINDI_TMP/$$.strip.txt
[963]	1957	cp -f $1 $tempfile 2>> $LOGFILE
[747]	1958	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
	1959	rm -f $tempfile
	1960	echo "Stripped comments from $2" >> $LOGFILE
	1961	}
	1962
	1963
[925]	1964
[747]	1965	StripExecutable()
	1966	{
	1967	local tmpfile
[925]	1968
[940]	1969	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	1970	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	1971	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	1972	strip $tmpfile 2> /dev/null
	1973	if [ "$?" -eq "0" ] ; then
[963]	1974	cp -f $tmpfile $1 2>> $LOGFILE
[925]	1975	echo "Stripped binary $2" >> $LOGFILE
[747]	1976	fi
	1977	rm -f $tmpfile
	1978	}
	1979
	1980
	1981	TryToFindKernelPath() {
	1982	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
[925]	1983
[747]	1984	we_want_version=`uname -r`
	1985	possible_kernels=""
	1986	duff_kernels=""
	1987
	1988	if [ "$ARCH" = "ia64" ] ; then
	1989	root="/boot/efi/efi"
	1990	else
	1991	root="/"
	1992	fi
[1466]	1993	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
[925]	1994	[ ! -e "$fname" ] && continue
[747]	1995	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[925]	1996	file $fname \| grep -q gzip
	1997	if [ "$?" -eq "0" ] ; then
	1998	# Used by ia64
[747]	1999	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2000	else
[747]	2001	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2002	fi
[747]	2003	[ "$fkern_ver" = "" ] && continue
	2004	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2005	[ -f "$fname" ] \|\| continue
	2006	[ -h "$fname" ] && continue
	2007	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2008	file $fname \| grep -q gzip
	2009	if [ "$?" -eq "0" ] ; then
	2010	# Used by ia64
	2011	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2012	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2013	duff_kernels="$fname $duff_kernels"
	2014	else
[747]	2015	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2016	possible_kernels="$fname $possible_kernels"
[925]	2017	fi
[747]	2018	else
[925]	2019	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2020	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2021	duff_kernels="$fname $duff_kernels"
	2022	else
[747]	2023	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2024	possible_kernels="$fname $possible_kernels"
[925]	2025	fi
[747]	2026	fi
	2027	done
	2028	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[925]	2029	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
[747]	2030	fi
	2031	if [ ! "$possible_kernels" ] ; then
[963]	2032	LogIt "No kernel matches exactly. Are there any duff kernels?"
[747]	2033	possible_kernels="$duff_kernels"
	2034	if [ ! "$possible_kernels" ] ; then
[963]	2035	LogIt "Sorry, no duff kernels either"
[747]	2036	else
[963]	2037	LogIt "I bet you're running Debian or Gentoo, aren't you?"
	2038	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
[747]	2039	fi
	2040	fi
	2041	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
	2042	noof_kernels=`CountItemsIn "$possible_kernels"`
	2043	if [ "$noof_kernels" -eq "0" ] ; then
[963]	2044	LogIt "Could not find your kernel."
[925]	2045	if [ -e "/boot/vmlinuz" ] ; then
[963]	2046	LogIt "Using /boot/vmlinuz as a last resort."
[925]	2047	output=/boot/vmlinuz
[747]	2048	else
[925]	2049	output=""
	2050	fi
[747]	2051	elif [ "$noof_kernels" -eq "1" ] ; then
	2052	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
	2053	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
	2054	output="$kernelpath"
	2055	else
	2056	for i in $possible_kernels ; do
	2057	if echo $i \| grep "`uname -r`" ; then
[925]	2058	LogIt "OK, I used my initiative and found that "
[963]	2059	LogIt "$i is probably your kernel. "
[925]	2060	output="$i"
	2061	return
	2062	fi
[747]	2063	done
[925]	2064	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
	2065	output=/boot/vmlinuz
	2066	echo "Schlomo, this one's for you." >> $LOGFILE
	2067	else
[963]	2068	LogIt "Two or more possible kernels found. You may specify any one of them and the "
	2069	LogIt "boot disks will still work, probably. If one does not work, try another."
	2070	LogIt "$possible_kernels"
[747]	2071	echo ""
[925]	2072	fi
[747]	2073	fi
	2074	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
	2075	}
	2076
	2077
	2078	TurnTgzIntoRdz() {
[1983]	2079	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
[925]	2080
[747]	2081	tgz_dir_fname=$1
	2082	rdz_fname=$2
[1983]	2083	kernelsize=$3
[1885]	2084	maxsize=$(($BOOT_SIZE-$kernelsize))
[747]	2085	maxsize=$(($maxsize*2)); # to allow for compression of 50%
[940]	2086	tempfile=$MINDI_TMP/temp.rd
	2087	mountpoint=$MINDI_TMP/mnt1
[747]	2088	res=0
	2089	echo -en "..."
	2090	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	2091	echo -en "..."
[1764]	2092	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
	2093	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2094	echo -en "..."
	2095	mkdir -p $mountpoint
	2096	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2097	echo -en "..."
	2098	old_pwd=`pwd`
	2099	cd $mountpoint
[959]	2100	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
[747]	2101	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
[1914]	2102
[747]	2103	cd dev \|\| Die "Can't cd to dev"
	2104	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
	2105	rm -f dev-entries.tgz
	2106	cd ..
	2107
	2108	for w in insmod.static insmod.static.old ; do
[925]	2109	s=`which $w 2> /dev/null`
	2110	if [ -e "$s" ] ; then
[1913]	2111	tar cf - $s 2> /dev/null \| tar xf -
[925]	2112	fi
[747]	2113	done
	2114
	2115	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[1724]	2116
[1882]	2117	# Handle the case where busybox and mount are dynamically linked
[1786]	2118	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
	2119	if [ $? -eq 0 ]; then
[1927]	2120	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
	2121	rm -f bin/mount $MINDI_TMP/busy.lis
	2122	mountlis=`grep mount $DEPLIST_FILE`
	2123	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
	2124	if [ -f $f ]; then
	2125	LocateDeps $f >> $MINDI_TMP/busy.lis
	2126	fi
	2127	done
	2128	tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null \| tar xf -
[1786]	2129	rm -f $MINDI_TMP/busy.lis
	2130	fi
	2131
[1914]	2132	mkdir -p $mountpoint/tmp
[1724]	2133	# Management of udev (which includes modprobe in rules)
[1759]	2134	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2135	if [ $? -eq 0 ]; then
[1914]	2136	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[1759]	2137	LogIt "udev device manager found"
[1913]	2138	tar cf - /etc/udev 2> /dev/null \| tar xf -
[1790]	2139	# This avoids NIC remapping if on another machine at restore time on Debian at least
	2140	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
[1913]	2141	tar cf - /lib*/udev 2> /dev/null \| tar xf -
[1720]	2142	if [ -x /sbin/udevd ]; then
[1781]	2143	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
	2144	lis=""
	2145	# Get only the files which exist in that list
[1815]	2146	# and potentially their symlink structure
[1781]	2147	for i in $lis2; do
[1815]	2148	if [ -h $i ]; then
	2149	j=$i
	2150	while [ -h $j ]; do
	2151	lis="$lis $j"
	2152	j=`readlink $j`
	2153	done
	2154	lis="$lis $j"
	2155	elif [ -f $i ]; then
[1781]	2156	lis="$lis $i"
	2157	fi
	2158	done
	2159	# And their deps
[1759]	2160	LocateDeps $lis > $MINDI_TMP/udev.lis
	2161	for i in $lis; do
	2162	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2163	j=`echo $i \| cut -c2-`
	2164	rm -f $j
	2165	fi
	2166	done
[1913]	2167	tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null \| tar xf -
[1721]	2168	rm -f $MINDI_TMP/udev.lis
[1720]	2169	else
	2170	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
[1724]	2171	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
[1914]	2172	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2173	fi
[1716]	2174	fi
[1786]	2175
[1761]	2176	# Management of potential HW info (Proliant only at the moment)
[1880]	2177	rm -rf $MINDI_CACHE/bkphw
	2178	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2179	if [ -d $MINDI_CACHE/bkphw ]; then
[1761]	2180	LogIt "Hardware Information found and saved ..."
[1880]	2181	cp -rp $MINDI_CACHE/bkphw .
	2182	if [ -f $MINDI_CACHE/tools.files ]; then
	2183	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2184	LocateDeps $lis > $MINDI_TMP/tools.lis
[1913]	2185	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null \| tar xf -
[1863]	2186	fi
[1880]	2187	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
	2188	mv -f $MINDI_CACHE/mindi-rsthw .
[1761]	2189	chmod 755 ./mindi-rsthw
	2190	fi
[1880]	2191	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2192	fi
	2193
[1885]	2194	for w in cdrom groovy-stuff ; do
[747]	2195	mkdir -p mnt/$w
	2196	done
	2197
[1913]	2198	tar cf - /dev/fd0[1,2][4,7,8] 2> /dev/null \| tar xf -
[1721]	2199
[747]	2200	cd $old_pwd
	2201	echo -en "..."
	2202	old_pwd=`pwd`
	2203	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	2204	cd $MINDI_TMP
[1885]	2205	needed_modules_path=lib/modules/$FAILSAFE_KVER
[747]	2206	else
	2207	cd /
	2208	if [ "${kernelname}" != "" ]
	2209	then
[1885]	2210	needed_modules_path=lib/modules/${kernelname}
[747]	2211	else
[1885]	2212	needed_modules_path=lib/modules/`uname -r`
[747]	2213	fi
	2214	fi
[1885]	2215
	2216	needed_modules=""
[1993]	2217	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2218
[940]	2219	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	2220	# For PXE boot
	2221	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2222	fi
[1715]	2223	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
	2224	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
	2225	fi
[1727]	2226	for i in $DENY_MODS; do
	2227	echo "Removing $i from the list of modules to load" >> $LOGFILE
	2228	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2229	done
	2230
[1885]	2231	[ -e "$needed_modules_path" ] \|\| LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
[747]	2232	for i in $list_of_groovy_mods ; do
[1885]	2233	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
[747]	2234	done
[1914]	2235
[1885]	2236	for i in $needed_modules ; do
[747]	2237	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
[940]	2238	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
[747]	2239	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
[1913]	2240	tar cf - $i 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy $i to $mountpoint"
[1914]	2241	# Uncompress modules if not using udev and native modprobe
[1815]	2242	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2243	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
[1914]	2244	echo "Uncompressing $i" >> $LOGFILE
[1727]	2245	gunzip -f $mountpoint/$i
[1815]	2246	fi
[1727]	2247	fi
[747]	2248	done
[1815]	2249
	2250	# Also copy modules.dep in case of udev so that normal modprobe works
[1913]	2251	tar cf - /$needed_modules_path/modules.dep 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy modules.dep to $mountpoint"
[1815]	2252
[1885]	2253	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
[747]	2254	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
	2255	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
	2256	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
	2257	rm -f $mountpoint/sbin/devfsd
	2258	fi
	2259	cd $old_pwd
	2260	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
	2261	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
	2262	rm -f $mountpoint/zero
[1885]	2263	if [ _"$MONDO_SHARE" != _"" ]; then
[747]	2264	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
[940]	2265	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
[953]	2266	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2267	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2268	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2269	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
[998]	2270	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
[747]	2271	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
	2272	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
	2273	fi
	2274	mkdir -p $mountpoint/proc
[1885]	2275	echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
[1230]	2276	# Determine what filesystem to use for initrd image
	2277	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
	2278	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2279	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
	2280	case "$gvFileSystem" in
	2281	"ext2fs")
	2282	# say what will be used
[1821]	2283	echo "Creating an ext2 initrd image..." >> $LOGFILE
[1230]	2284	# kernel expects linuxrc in ext2 filesystem
	2285	( cd $mountpoint && ln -sf sbin/init linuxrc )
	2286	# unmount loop filesystem and create image file using the standard approach
	2287	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[1764]	2288	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
[1794]	2289	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
[1764]	2290	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2291	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2292	rm -f ${rdz_fname}.tmp
[1230]	2293	# log that we are done
[1821]	2294	echo "...done." >> $LOGFILE
[1230]	2295	;;
	2296	"initramfs")
	2297	# say what will be used
[1821]	2298	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
[1230]	2299	# make sure that cpio is there
	2300	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2301	# go into filesystem
	2302	cd $mountpoint
	2303	# kernel expects init in cpio filesystem
	2304	ln -sf sbin/init init
	2305	# create cpio image file and unmount loop filesystem
[1929]	2306	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
[1230]	2307	cd $old_pwd
	2308	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2309	# log that we are done
	2310	echo "...done." >> $LOGFILE
	2311	;;
	2312	*)
	2313	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
	2314	;;
	2315	esac
[747]	2316	if [ "$res" -eq "0" ] ; then
	2317	echo -en "..."
	2318	else
	2319	echo -en "\rMade an rdz WITH ERRORS. \n"
	2320	fi
	2321	return 0
	2322	}
	2323
	2324
	2325	##############################################################################
[1021]	2326	#----------------------------------- Main -----------------------------------#
[747]	2327	##############################################################################
	2328
[1885]	2329	# Now we can create what we need
	2330	mkdir -p $MINDI_TMP
[747]	2331
[1885]	2332	# Purge from potential old run
	2333	if [ _"$MINDI_CACHE" = _"" ]; then
	2334	Die "MINDI_CACHE undefined"
	2335	fi
	2336	rm -rf $MINDI_CACHE/* 2> /dev/null
	2337	mkdir -p $MINDI_CACHE
	2338
	2339	if [ "$1" = "--printvar" ] ; then
	2340	shift
	2341	if [ _"$1" != _"" ] ; then
	2342	set \| grep -Ew "^$1" \| cut -d= -f2
	2343	fi
	2344	MindiExit 0
	2345	fi
	2346
[747]	2347	> $LOGFILE
	2348	echo "mindi v$MINDI_VERSION" >> $LOGFILE
	2349	echo "$ARCH architecture detected" >> $LOGFILE
	2350	echo "mindi called with the following arguments:" >> $LOGFILE
	2351	echo "$@" >> $LOGFILE
[800]	2352	echo "Start date : `date`" >> $LOGFILE
[1684]	2353	echo "-----------------------------" >> $LOGFILE
[747]	2354
	2355	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
	2356
[1010]	2357	# Log some capital variables
	2358	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[1885]	2359	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
[1010]	2360	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
	2361	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
	2362	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
	2363	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
[1885]	2364	if [ -f $MINDI_CONFIG ]; then
	2365	echo "-----------------------------" >> $LOGFILE
	2366	echo " Mindi configuration file " >> $LOGFILE
	2367	echo "-----------------------------" >> $LOGFILE
	2368	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
	2369	echo "-----------------------------" >> $LOGFILE
	2370	fi
[1010]	2371
[1885]	2372
[747]	2373	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	2374
	2375	# Sanity checks
	2376	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	2377	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	2378	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	2379	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	2380	if which awk &> /dev/null ; then
	2381	if ! which gawk &> /dev/null ; then
	2382	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
	2383	fi
	2384	fi
	2385	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
	2386	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
	2387
[747]	2388	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	2389
	2390	# Update the PATH variable if incomplete
	2391	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	2392	PATH=$PATH:/sbin:/usr/sbin
	2393	export PATH
	2394	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
	2395	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
	2396	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
	2397	fi
	2398
[1885]	2399	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2400	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
	2401	source $MINDI_LIB/FindDistroFailsafe
	2402	# Log kernel image
	2403	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2404	else
	2405	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
	2406	fi
[1010]	2407
[1737]	2408	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[1010]	2409	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
	2410	fi
	2411
[925]	2412	### BERLIOS
[747]	2413	### Fix as it's not mandatory on ia64
	2414	if [ "$ARCH" = "ia64" ] ; then
[1010]	2415	if which elilo &> /dev/null ; then
	2416	LILO_EXE=elilo
	2417	else
	2418	LILO_EXE=`which false`
	2419	fi
[747]	2420	else
	2421	FindIsolinuxBinary
	2422	fi
	2423	trap "Aborted" SIGTERM
	2424	DONE="\r\t\t\t\t\t\t\t\tDone. "
	2425	kernelpath=""
[1010]	2426	MONDO_ROOT=/var/cache/mondo
[747]	2427	mkdir -p $MONDO_ROOT
	2428
	2429	if [ -d "/proc/lvm" ]; then
	2430	# LVM v1
	2431	LVMCMD=""
	2432	LVM="v1"
	2433	elif [ -d "/dev/mapper" ]; then
	2434	# LVM v2
	2435	LVMCMD="lvm"
	2436	LVM="v2"
	2437	else
	2438	LVM="false"
	2439	fi
[1021]	2440	echo "LVM set to $LVM" >> $LOGFILE
	2441	echo "----------" >> $LOGFILE
[1230]	2442	echo "mount result:" >> $LOGFILE
	2443	echo "-------------" >> $LOGFILE
	2444	mount >> $LOGFILE
	2445	echo "-------------" >> $LOGFILE
[1315]	2446	if [ -e /etc/raidtab ]; then
	2447	echo "-------------" >> $LOGFILE
	2448	echo "/etc/raidtab content:" >> $LOGFILE
	2449	echo "-------------" >> $LOGFILE
	2450	cat /etc/raidtab >> $LOGFILE
	2451	fi
	2452	echo "-------------" >> $LOGFILE
[1418]	2453	echo "cat /proc/cmdline:" >> $LOGFILE
	2454	echo "-------------" >> $LOGFILE
	2455	cat /proc/cmdline >> $LOGFILE
	2456	echo "-------------" >> $LOGFILE
[1021]	2457	echo "lsmod result:" >> $LOGFILE
	2458	echo "-------------" >> $LOGFILE
	2459	lsmod >> $LOGFILE
[1399]	2460	MODULES="`cat /proc/modules \| awk '{print $1}'`"
[1531]	2461	if [ -x /usr/sbin/esxcfg-module ]; then
[1797]	2462	echo "-------------" >> $LOGFILE
[1497]	2463	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
	2464	echo "-------------" >> $LOGFILE
	2465	echo "VMWare modules" >> $LOGFILE
	2466	echo "-------------" >> $LOGFILE
[1531]	2467	/usr/sbin/esxcfg-module -l >> $LOGFILE
[1764]	2468	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
[1497]	2469	fi
[1851]	2470	echo "FORCE_MODS:" >> $LOGFILE
[1021]	2471	echo "-------------" >> $LOGFILE
[1851]	2472	echo $FORCE_MODS >> $LOGFILE
[1882]	2473	echo "-------------" >> $LOGFILE
[1851]	2474	echo "DENY_MODS:" >> $LOGFILE
	2475	echo "-------------" >> $LOGFILE
	2476	echo $DENY_MODS >> $LOGFILE
	2477	echo "-------------" >> $LOGFILE
[1796]	2478	echo "df result:" >> $LOGFILE
[1785]	2479	echo "----------" >> $LOGFILE
[1796]	2480	df -T >> $LOGFILE
[1785]	2481	echo "-------------" >> $LOGFILE
[1230]	2482	echo "Liste of extra modules is:" >> $LOGFILE
	2483	echo "$EXTRA_MODS" >> $LOGFILE
	2484	echo "-------------" >> $LOGFILE
[747]	2485
[1723]	2486	# Compute libata version
[1797]	2487	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	2488	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	2489	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	2490	if [ "$laver" = "2" ]; then
[1726]	2491	DENY_MODS="$DENY_MODS ide-generic"
[1727]	2492	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
[1726]	2493	echo "-------------" >> $LOGFILE
	2494	fi
[1723]	2495	fi
	2496
[747]	2497	FLOPPY_WAS_MOUNTED=""
	2498	for mtpt in /media/floppy /mnt/floppy /floppy ; do
	2499	if mount \| grep -w $mtpt &> /dev/null ; then
	2500	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
	2501	umount $mtpt
	2502	fi
	2503	done
	2504
[1684]	2505	#
	2506	# If we have a USB device we need to store info
	2507	# and remove it from the parameters line
	2508	#
[747]	2509	if [ "$#" -ne "0" ] ; then
[1684]	2510	if [ "$1" = "--usb" ] ; then
	2511	shift
	2512	USBDEVICE=$1
	2513	if [ _"$USBDEVICE" = _"" ]; then
	2514	Die "No USB device specified"
	2515	fi
	2516	shift
	2517	fi
	2518	fi
	2519
	2520	if [ "$#" -ne "0" ] ; then
[747]	2521	if [ "$1" = "--findkernel" ] ; then
	2522	res=`TryToFindKernelPath`
[1336]	2523	# Avoids logfile content for mondo
	2524	export MONDO_SHARE=""
[747]	2525	if [ "$res" = "" ] ; then
[925]	2526	MindiExit -1
[747]	2527	else
	2528	echo "$res"
[925]	2529	MindiExit 0
[747]	2530	fi
[1720]	2531	elif [ "$1" = "--locatedeps" ] ; then
	2532	[ ! "$2" ] && Die "Please specify the binary to look at"
	2533	LocateDeps $2
	2534	# Avoids logfile content for mondo
	2535	export MONDO_SHARE=""
	2536	MindiExit $?
[1815]	2537	elif [ "$1" = "--readalllink" ] ; then
	2538	[ ! "$2" ] && Die "Please specify the binary to look at"
	2539	ReadAllLink $2
	2540	# Avoids logfile content for mondo
	2541	export MONDO_SHARE=""
	2542	MindiExit $?
[747]	2543	elif [ "$1" = "--makemountlist" ] ; then
	2544	[ ! "$2" ] && Die "Please specify the output file"
	2545	MakeMountlist $2
[1336]	2546	# Avoids logfile content for mondo
	2547	export MONDO_SHARE=""
[925]	2548	MindiExit $?
	2549	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	2550	echo "Mindi v$MINDI_VERSION"
[1336]	2551	# Avoids logfile content for mondo
	2552	export MONDO_SHARE=""
[925]	2553	MindiExit 0
[747]	2554	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	2555	MONDO_TMP=$2
	2556	# Change MINDI_TMP for the one provided by mondo
	2557	# So that it can get back the built files
[1010]	2558	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
	2559	rmdir $MINDI_TMP
[1486]	2560	export MINDI_TMP=$MONDO_TMP
[953]	2561	mkdir -p $MINDI_TMP
[1696]	2562	# This is the scratch dir in mondo - subdir images
[1880]	2563	MINDI_CACHE=$3
	2564	if [ _"$MINDI_CACHE" != _"" ]; then
	2565	mkdir -p $MINDI_CACHE
[938]	2566	fi
[925]	2567	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[747]	2568	###
	2569	### Sq-Modification...
	2570	### Attempt to locate kernel specific module path
	2571	### if module path is found then use it other wise use uname -r to set it...
	2572	###
	2573	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
[963]	2574	LogIt "kernelname = $kernelname"
	2575	LogIt "kernelpath = $kernelpath"
[747]	2576	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2577	then
[963]	2578	LogIt "Module path for ${kernelpath} not found..."
	2579	LogIt "using running kernel\'s modules."
[747]	2580	kernelname=`uname -r`
	2581	else
[963]	2582	LogIt "Using modules for kernel: ${kernelname}"
[747]	2583	fi
	2584	###
	2585	### end of Sq-Modification
	2586	###
[925]	2587	TAPEDEV=$5
	2588	TAPESIZE=$6
	2589	FILES_IN_FILELIST=$7
	2590	USE_LZO=$8
	2591	CDRECOVERY=$9
[747]	2592	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	2593	IMAGE_DEVS=""
	2594	else
	2595	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	2596	fi
[925]	2597	if [ "${11}" ] ; then
	2598	LILO_OPTIONS=""
	2599	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
	2600	fi
	2601	LAST_FILELIST_NUMBER=${12}
[747]	2602	ESTIMATED_TOTAL_NOOF_SLICES=${13}
	2603	EXCLUDE_DEVS="${14}"
	2604	USE_COMP="${15}"
	2605	USE_LILO="${16}"
[925]	2606	USE_STAR="${17}"
	2607	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	2608	DIFFERENTIAL="${19}"
[998]	2609	USE_GZIP="${20}"
	2610	NOT_BOOT="${21}"
[747]	2611	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	2612	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[747]	2613	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[963]	2614	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
[925]	2615	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
[747]	2616	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
	2617	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2618	then
[963]	2619	LogIt "Module path for ${kernelpath} not found..."
	2620	LogIt "using running kernel\'s modules."
[747]	2621	kernelname=`uname -r`
	2622	else
[963]	2623	LogIt "Using modules for kernel: ${kernelname}"
[747]	2624	fi
[925]	2625	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
[1696]	2626	# MONDO_ROOT is the real scratchdir
[1880]	2627	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	2628	if [ _"$MONDO_ROOT" != _"" ]; then
	2629	mkdir -p $MONDO_ROOT
	2630	else
	2631	Die "MONDO_ROOT is undefined"
	2632	fi
[747]	2633	else
[925]	2634	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
	2635	MindiExit -1
[747]	2636	fi
	2637	fi
	2638	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	2639
[1684]	2640	if [ _"$MONDO_SHARE" = _"" ]; then
[963]	2641	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	2642	LogIt "Latest Mindi is available from http://www.mondorescue.org"
	2643	LogIt "BusyBox sources are available from http://www.busybox.net"
[747]	2644	LogIt "------------------------------------------------------------------------------"
	2645	else
[1315]	2646	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
[747]	2647	fi
[1005]	2648	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
	2649	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
	2650	else
	2651	LogIt "Unable to find mindi-busybox, please install it"
	2652	MindiExit -1
	2653	fi
[747]	2654
	2655	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
	2656	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
	2657	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
	2658	insmod $i >> $LOGFILE 2>> $LOGFILE
	2659	done
	2660
	2661	KERN_DISK_MADE=""
	2662
	2663	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
	2664	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
	2665	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
	2666	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[963]	2667	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
[940]	2668	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	2669	MakeMountlist $MINDI_TMP/mountlist.txt
	2670	mkdir -p $MINDI_TMP/small-all/tmp
	2671	cd $MINDI_TMP/small-all
[953]	2672	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
[1913]	2673	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
[747]	2674	sleep 2
[963]	2675	LogIt "Done. Exiting."
[925]	2676	MindiExit 0
[747]	2677	fi
	2678
[1690]	2679	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1684]	2680	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
	2681	fi
	2682
[747]	2683	if [ "$kernelpath" = "" ] ; then
[1335]	2684	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[966]	2685	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
	2686	read ch
	2687	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	2688	USE_OWN_KERNEL="yes"
[1809]	2689	else
	2690	USE_OWN_KERNEL="no"
[747]	2691	fi
	2692	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	2693	YOUR_KERNEL_SUCKS=""
	2694	kernelpath=`TryToFindKernelPath`
	2695	if [ "$kernelpath" = "" ] ; then
	2696	echo -n "Please enter kernel path : "
	2697	read kernelpath
	2698	fi
[747]	2699	else
[925]	2700	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
[747]	2701	fi
	2702	fi
	2703	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
[1885]	2704	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2705	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
	2706	source $MINDI_LIB/FindDistroFailsafe
	2707	# Log kernel image
	2708	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2709	kernelpath="$FAILSAFE_KBIN"
	2710	LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
	2711	LogIt "The failsafe kernel is $kernelpath.\n"
	2712	LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
	2713	LogIt "disks then it may still be a result of a problem with your kernel.\n"
	2714	pwd=`pwd`
	2715	cd $MINDI_TMP
	2716	mkdir -p lib/modules
	2717	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
	2718	cd $pwd
	2719	else
	2720	kernelpath=$MINDI_LIB/vmlinuz
	2721	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
	2722	LogIt "However, you are still running your kernel. If Mindi fails to create your"
	2723	LogIt "disks then it may still be a result of a problem with your kernel."
	2724	pwd=`pwd`
	2725	cd $MINDI_TMP
	2726	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
	2727	cd $pwd
	2728	fi
[747]	2729	YOUR_KERNEL_SUCKS="Your kernel sucks"
	2730	fi
[1880]	2731	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[963]	2732	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
[747]	2733
[965]	2734	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
[747]	2735
[1983]	2736	PrepareDataDiskImages
	2737
[747]	2738	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2739	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
[1983]	2740	export ramdisk_size=$rds
[747]	2741
	2742	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
[1567]	2743	if [ "$ARCH" = "ia64" ] ; then
[1983]	2744	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
[1567]	2745	else
[1983]	2746	PrepareBootDiskImage_SYSLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size MB disk image."
[747]	2747	fi
	2748
	2749	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	2750	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	2751
[1684]	2752	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	2753	ListImagesForUser
	2754	OfferToMakeBootableISO
[1684]	2755	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	2756	OfferToMakeBootableUSB
[1684]	2757	fi
[963]	2758	LogIt "Finished."
[747]	2759	elif [ "$TAPEDEV" ] ; then
[1901]	2760	rm -f $MINDI_CACHE/{img,iso}
[1898]	2761	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	2762	OfferToMakeBootableUSB
[1898]	2763	fi
[1983]	2764	OfferToMakeBootableISO
[1880]	2765	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	2766	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	2767	else
[925]	2768	Die "Cannot find all.tar.gz, to be written to tape"
[747]	2769	fi
[1695]	2770	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	2771	OfferToMakeBootableUSB
[747]	2772	else
[1983]	2773	OfferToMakeBootableISO
[747]	2774	fi
	2775	# cleanup
[963]	2776	LogIt "$FRIENDLY_OUTSTRING"
[747]	2777	for mtpt in $FLOPPY_WAS_MOUNTED ; do
	2778	mount $mtpt
	2779	done
[925]	2780	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: