source: branches/2.2.6/mindi/mindi @ 1957

Last change on this file since 1957 was 1957, checked in by bruno, 11 years ago

Remove useless mindi variable MAX_DISKS

  • Property svn:keywords set to Rev Id
File size: 108.7 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 1957 2008-05-27 23:01:35Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17
18ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20#RUN_AFTER_INITIAL_BOOT_PHASE="echo \"Who lives in a pineapple under the sea?\" > /tmp/spongebob.squarepants.txt"
21    # after booting from image/CD but before
22    # accessing auxiliary data disks (or the rest of
23    # the CD), the initscript will run the above command.
24
25RUN_AFTER_BOOT_PHASE_COMPLETE="ide-opt"
26    # after the emergency boot process is complete but
27    # before the init script runs mondorestore, it will
28    # run this command.
29
30MINDI_REV=PBREV
31MINDI_VER=PBVER
32
33MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
34MINDI_PREFIX=XXX
35MINDI_CONF=YYY
36MINDI_SBIN=${MINDI_PREFIX}/sbin
37MINDI_LIB=LLL
38
39# Temporary directory for mindi
40TMPDIR=/tmp
41
42EXTRA_SPACE=49152       # increase if you run out of ramdisk space
43BOOT_SIZE=16384         # size of the boot disk
44
45PROMPT_MAKE_CD_IMAGE="yes"
46    # Ask if you want to make a CD Image to be written?
47    # if this is set to 'no', then the image will be created automatically
48
49PROMPT_MAKE_USB_IMAGE="yes"
50    # Ask if you want to make a USB Image to be written?
51    # if this is set to 'no', then the image will be created automatically
52
53USE_OWN_KERNEL="yes"
54    # If set to "no", you will be prompted for whether or not
55    # you want to use your own kernel, or the supplied default.
56    # If "yes" mindi will automatically use your own kernel.
57
58MY_FSTAB=/etc/fstab
59TAPE_MODS="ht st osst ide-tape ide_tape"
60SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
61
62# ide-probe-mod
63IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks"
64PCMCIA_MODS="pcmcia_core ds yenta_socket"
65USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
66CDROM_MODS="$TAPE_MODS $IDE_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 $USB_MODS $PCMCIA_MODS"
67NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
68EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
69# Replace with that line for HP OCMP e.g.
70#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
71DENY_MODS="kqemu"
72# Force some modules to be included
73FORCE_MODS=""
74
75LOGFILE=/var/log/mindi.log
76MINDI_CACHE=/var/cache/mindi
77BOOT_MEDIA_MESSAGE="\
78To format and restore all files automatically, type 'nuke' <enter>.\n\
79To restore some/all files interactively, type 'interactive' <enter>.\n\
80To compare the archives with your filesystem, type 'compare' <enter>.\n\
81To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
82You may add one or more of the following parameters as well:-\n\n\
83        donteject - mondorestore will not eject the CD; this is useful if, for\n\
84                    instance, your PC's case has a concealed CD-ROM drive\n\
85        noresize  - your mountlist will not be adjusted to use your unallocated\n\
86                    hard disk space\n\
87        textonly  - do not call any Newt library routines; this is unattractive\n\
88                    but valuable if you find your Newt library has bugs in it\n\n\
89e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
90a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
91"
92FDISK=$MINDI_SBIN/parted2fdisk
93
94# Using a config file allow to overwrite some values
95MINDI_CONFIG="$MINDI_CONF/mindi.conf"
96if [ -f $MINDI_CONFIG ]; then
97    . $MINDI_CONFIG
98fi
99DEPLIST_FILE="$MINDI_CONF/deplist.txt"
100ISO_CMD="/usr/bin/mkisofs"
101ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
102
103# Now we can create what we need
104export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
105
106# ----------------------------------------------------------------------------
107
108
109AbortHere() {
110    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
111    Die "Program is terminating in response to signal received from OS/user"
112}
113
114
115HackSyslinuxFile() {
116    local incoming
117    incoming=`ReadLine`
118    while [ "$incoming" ] ; do
119        echo -en "$incoming" | sed s/24000/$1/
120        if [ "`echo "$incoming" | grep append`" ] ; then
121            echo -en " $ADDITIONAL_BOOT_PARAMS"
122        fi
123        echo -en "\n"
124        incoming=`ReadLine`
125    done
126    if [ -e "$MINDI_LIB/memtest.img" ] ; then
127        echo -en "label memtest\n  kernel memdisk\n  append initrd=memtest.img\n\n"
128    fi
129}
130
131
132Aborted() {
133    trap SIGHUP SIGTERM SIGTRAP SIGINT
134    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
135    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
136    Die "User abort."
137}
138
139
140AddFileToCfgIfExists() {
141    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
142}
143
144
145AddKeyboardMappingFile() {
146    local mappath r included_list included_item i res ii sss
147    mappath=$1
148    KBDEPTH=$(($KBDEPTH+1))
149    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
150    if [ -e "$bigdir/$mappath" ] ; then
151        echo "$mappath already added" >> $LOGFILE
152        return
153    elif [ -d "$bigdir/$mappath" ] ; then
154        echo "Cannot add $mappath: it's a directory. Sorry."
155        return
156    fi
157    echo "Added kbd map $mappath" >> $LOGFILE
158    if [ ! -e "$mappath" ] ; then
159            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
160        if [ ! -e "$mappath" ] ; then
161            LogIt "Cannot add $mappath: kbd map file not found"
162            return
163        fi
164    else
165        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
166    fi
167
168    mkdir -p $bigdir/etc
169    tar cf - $mappath 2>> /dev/null | (cd $bigdir ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir"
170    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
171        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
172    else
173        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
174    fi
175    for included_item in $included_list ; do
176        if [ ! -e "$included_item" ] ; then
177                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
178            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
179            for ii in $sss ; do
180                [ -e "$ii" ] && AddKeyboardMappingFile $ii
181            done
182        else
183            AddKeyboardMappingFile $included_item
184        fi
185    done
186}
187
188
189ChopUpAndCopyFile() {
190    local filename slicesize outdir res biggienumber filesize sliceno noof_slices testfile scratchfile
191    filename=$1
192    outdir=$2
193    slicesize=$3
194    biggienumber=$4
195
196    [ -d "$filename" ] && Die "Cannot chop up $filename: it's a directory. Please amend $DEPLIST_FILE accordingly."
197    mkdir -p $outdir
198
199    sliceno=0
200    scratchfile=$MINDI_TMP/blah.$$.dat
201    cp -f $filename $scratchfile 2>> $LOGFILE || Die "CUACF -- cannot copy $filename to $scratchfile - did you run out of disk space?"
202    [ "`head $scratchfile -n1 | grep -F "bin/sh"`" != "" ] && StripComments $scratchfile "-$filename-"
203    [ "`echo "$filename" | grep -F "etc/termcap"`" != "" ] && StripComments $scratchfile "-$filename-"
204
205    # Uncompress modules only if not using udevd
206    if [ "`echo "$filename" | grep -F "lib/modules/" | grep "\.*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
207        mv $scratchfile $scratchfile.gz
208        gunzip -f $scratchfile || LogIt "Cannot gunzip $scratchfile.gz"
209        filename=`echo "$filename" | tr '.' '#' | sed s/#o#gz/#o/ | sed s/#ko#gz/#ko/ | tr '#' '.'`
210    fi
211    filesize=`du -sk $scratchfile | cut -f1`
212    noof_slices=$(($filesize/$slicesize))
213    echo "$filename" > $outdir/slice-$biggienumber.name
214    echo "$filesize" > $outdir/slice-$biggienumber.size
215    [ -x "$scratchfile" ] && StripExecutable $scratchfile "-$filename-"
216    while [ "$sliceno" -le "$noof_slices" ] ; do
217        dd if=$scratchfile skip=$(($sliceno*$slicesize)) of=$outdir/slice-$biggienumber.`printf "%03d" $sliceno` bs=1k count=$slicesize &> /dev/null
218        sliceno=$(($sliceno+1))
219    done
220    rm -f $scratchfile
221}
222
223
224CopyBootBFile() {
225    local copy_to copy_from possible_locations liloc
226    copy_to=$1
227    copy_from=/boot/boot.b
228    liloc=`which lilo.real 2>/dev/null`
229    [ $liloc ] || liloc=`which lilo 2>/dev/null`
230    if [ $liloc ]; then
231        if ! [ `strings $liloc | grep "boot\.b"` ]; then
232            LogIt "boot.b files built into lilo; I'll create a dummy."
233            > $copy_to
234            return 0
235        fi
236    fi
237    if [ ! -f "$copy_from" ] ; then
238        LogIt "OK, you don't have a /boot/boot.b file, which is odd because\n most _good_ Linux distributions come with one, even if it's only a softlink"
239        copy_from=`grep install= /etc/lilo.conf | grep "\.b" | cut -d'=' -f2`
240        if [ ! -f "$copy_from" ] ; then
241            LogIt "Nor can I find it from your /etc/lilo.conf file. This is very odd."
242            copy_from=`FindSensibleBootBFile`
243            LogIt "I'm going to use '$copy_from'"
244        fi
245    fi
246    cp -f $copy_from $copy_to 2>> $LOGFILE || LogIt "CBBF -- warning -- cannot find your boot.b file. That's it, I quit... (j/k)"
247}
248
249
250CopyDependenciesToDirectory() {
251    local outdir incoming fname filesize counter d found
252    outdir=$1
253    mkdir -p $outdir
254    incoming=`ReadLine`
255    counter=0
256    while [ "$incoming" != "" ] ; do
257        # Non absolute file names should not arrive till here => skipped
258        if [ `echo "$incoming" | cut -c1` != '/' ]; then
259            LogIt "Unable to handle $incoming"
260            incoming=`ReadLine`
261            continue
262        fi
263        # no parent directory of incoming should be a link, copy is not possible in that case
264        d=`dirname "$incoming"`
265        found="false"
266        while [ $d != "/" -a $found = "false" ]; do
267            [ -h "$d" ] && found="true"
268            d=`dirname "$d"`
269        done
270        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
271            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
272        elif [ -e "$incoming" ] && [ $found = "false" ]; then
273            filesize=`du -sk $incoming | cut -f1`
274            if [ "$filesize" -gt "$(($CHOPSIZE*2))" ] && [ ! -h "$incoming" ] ; then
275                ChopUpAndCopyFile $incoming $outdir $CHOPSIZE $BIGNO
276                BIGNO=$(($BIGNO+1))
277            else
278                tar cf - $incoming 2> /dev/null | (cd $outdir ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
279   
280                # Only uncompress modules if not using udevd
281                if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
282                    gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
283                fi
284                [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
285            fi
286            counter=$(($counter+1))
287            if [ "$counter" -ge "5" ] ; then
288                counter=0
289                echo -en "."
290            fi
291        fi
292        incoming=`ReadLine`
293    done
294}
295
296
297CountItemsIn() {
298    local r
299    r=0
300    for q in $1 ; do
301        r=$(($r+1))
302    done
303    echo $r
304}
305
306
307# Last function called before exiting
308# Parameter is exit code value
309MindiExit() {
310    local my_partitions
311
312    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
313    echo "End date : `date`" >> $LOGFILE
314    if [ _"$MONDO_SHARE" != _"" ] ; then
315        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
316        cat $LOGFILE >> /var/log/mondoarchive.log
317        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
318    fi
319
320    cd /
321    sync&
322
323    # Unmount what could remain mounted
324    my_partitions=`mount | grep -F $$ | cut -f1 -d' '`
325    [ "$my_partitions" != "" ] && umount $my_partitions
326    # Clean temporary files only when standalone mindi
327    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
328        rm -Rf $MINDI_TMP
329    fi
330    exit $1
331}
332
333Die() {
334    local i
335    if [ "$1" = "" ] ; then
336        LogIt "FATAL ERROR"
337    else
338        LogIt "FATAL ERROR. $1"
339    fi
340
341    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
342    LogIt "See http://www.mondorescue.org for more information."
343    LogIt "WE CANNOT HELP unless you enclose that file.\n"
344    MindiExit -1
345}
346
347
348DropOptimizedLibraries() {
349    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
350    filelist=$1
351    outdir=$2
352
353    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
354    if [ "$list_of_optimized_libraries" = "" ] ; then
355        return 0
356    fi
357    echo -en "Dropping i686-optimized libraries if appropriate"
358    for optimized_lib_name in $list_of_optimized_libraries ; do
359        echo -en "."
360        reason=""
361        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
362        echo "$vanilla_lib_name" >> $filelist
363        resolved=$vanilla_lib_name
364        echo "Adding $resolved to filelist" >> $LOGFILE
365        resolved=`ReadAllLink $resolved`
366        echo "Adding $resolved to filelist" >> $LOGFILE
367        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
368        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
369        ln -sf $vanilla_lib_name $outdir$optimized_lib_name
370        echo "Excluding $optimized_lib_name" >> $LOGFILE
371        grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
372        echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
373        echo "$vanilla_lib_name" >> $filelist.tmp
374        mv -f $filelist.tmp $filelist
375    done
376    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
377    mv -f $filelist.tmp $filelist
378    echo -e "$DONE"
379}
380
381
382FindAndAddUserKeyboardMappingFile() {
383    local r res mapfile mappath included_item included_list keyfile mp locale
384    LogIt "Analyzing your keyboard's configuration."
385    KEYDIR=/lib/kbd
386    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
387    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
388    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
389    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
390    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
391    if [ ! -e "$KEYDIR" ] ; then
392        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
393        return 0
394    fi
395    if [ -e "/etc/sysconfig/keyboard" ] ; then
396        echo "Red Hat-style config detected." >> $LOGFILE
397        keyfile=/etc/sysconfig/keyboard
398    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
399        echo "Slackware-style config detected." >> $LOGFILE
400        keyfile=/etc/rc.d/rc.keymap
401    elif [ -e "/etc/rc.config" ] ; then
402        echo "Debian-style config detected." >> $LOGFILE
403        keyfile=/etc/rc.config
404    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
405        echo "Debian-style config detected." >> $LOGFILE
406        echo -en "Adding the following keyboard mapping tables: "
407        mkdir -p $bigdir/tmp
408        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
409        KBDEPTH=0
410        mkdir -p $bigdir/etc/console
411        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
412        echo -e "$DONE"
413        return 0
414    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
415        echo "Ubuntu-style config detected." >> $LOGFILE
416        echo -en "Adding the following keyboard mapping tables: "
417        mkdir -p $bigdir/tmp
418        echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
419        KBDEPTH=0
420        mkdir -p $bigdir/etc/console-setup
421        cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
422        echo -e "$DONE"
423        return 0
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        echo "Gentoo-style config detected." >> $LOGFILE
426        keyfile=/etc/conf.d/keymaps
427    else
428        echo -en "Searching for rc.config ..."
429        keyfile=`find /etc -name rc.config | head -n1`
430        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
431            LogIt "Unknown config detected. Default keyboard map will be used."
432            return
433        else
434            echo "Found $keyfile" >> $LOGFILE
435        fi
436    fi
437    if [ ! -e "$KEYDIR/keymaps" ] ; then
438        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
439        return
440    fi
441    echo "keyfile=$keyfile" >> $LOGFILE
442    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
443    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
444    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo
445    echo "locale=$locale" >> $LOGFILE
446    #
447    # Process the keymaps dir once for all
448    # AddKeyboardMappingFile will use it recursively
449    #
450    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
451    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
452    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
453    # If we have multiple keymaps then log it !!
454    echo "$mp" | grep -q " "
455    if [ $? -eq 0 ]; then
456        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
457        echo "The following one will be used" >> $LOGFILE
458    fi
459    for i in $mp ; do
460        mappath=$i
461        [ -e "$i" ] && [ ! -d "$i" ] && break
462    done
463    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
464            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
465    fi
466    echo "mappath = $mappath" >> $LOGFILE
467    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
469        return
470    fi
471    echo -en "Adding the following keyboard mapping tables: "
472    mkdir -p $bigdir/tmp
473    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
474    KBDEPTH=0
475    AddKeyboardMappingFile $mappath
476    echo -e "$DONE"
477    rm -f $MINDI_TMP/keymaps.find
478    return 0
479}
480
481
482FindIsolinuxBinary() {
483    ISOLINUX=/usr/lib/isolinux.bin
484    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
485    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
486    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
487    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
488    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
489    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
490    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
491    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
492}
493
494
495FindLiloBinary() {
496    if which lilo &> /dev/null ; then
497        if which lilo.real > /dev/null 2> /dev/null ; then
498            LILO_EXE=lilo.real
499            LogIt "lilo.real found; will be used instead of lilo (*grumble* *mutter*)"
500        else
501            LILO_EXE=lilo
502        fi
503        $LILO_EXE -V | grep -F "21.6" > /dev/null && Die "Please upgrade LILO. Your version has a serious bug. If you're not _using_ LILO, fine, uninstall it. :)"
504    else
505        LILO_EXE=`which false`
506    fi
507}
508
509
510FindSensibleBootBFile() {
511    local i out last
512    out=""
513    last=""
514    for i in `find /boot -type f | grep -v chain | grep -v os2 | sort -u` ; do
515    if [ "`strings $i 2> /dev/null | head -n1`" = "LILO" ] ; then
516        out="$out $i"
517        last="$i"
518    fi
519    done
520    echo "$last"
521}
522
523
524FindSpecificModuleInPath() {
525    local modpaths pwd line
526    pwd=`pwd`
527    if [ "$YOUR_KERNEL_SUCKS" ] ; then
528        cd $MINDI_TMP
529    else
530        cd /
531    fi
532    if [ ! -e "$1" ] ; then
533        LogIt "WARNING - cannot search specific path '$1'"
534        return 1
535    fi
536    modpaths=`find $1 -name $2.*o -type f`
537    #[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
538    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
539    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
540    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
541    echo "$modpaths"
542    cd $pwd
543}
544
545
546GenerateGiantDependencyList() {
547    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
548
549    echo -en "Analyzing dependency requirements"
550    outfile=$1
551    tempfile=$MINDI_TMP/$$.txt
552    incoming=`ReadLine`
553
554    > $tempfile
555    progress=0
556    res=0
557    noof_lines=$2
558    while [ "$incoming" != "" ] ; do
559        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
560            incoming=`ReadLine`
561            continue
562        fi
563        if [ "$incoming" = "LVMFILES:" ] ; then
564            break
565        fi
566        filelist=`GenerateListForFile "$incoming"`
567        r=$?
568        [ "$r" -ne "0" ] && LogIt "$incoming not found"
569        res=$(($res+$r))
570#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
571        for fname in $filelist ; do
572            [ "$fname" != "" ] && echo "$fname" >> $tempfile
573        done
574        progress=$(($progress+1))
575        echo -en "\r\t\t\t\t\t\t\t\t"
576        i=$(($progress*100))
577        i=$(($i/$noof_lines))
578        echo -en "$i"
579        echo -en "%"
580        modres=$(($progress%4))
581        [ "$modres" -eq "0" ] && echo -en "\t/"
582        [ "$modres" -eq "1" ] && echo -en "\t-"
583        [ "$modres" -eq "2" ] && echo -en "\t\\"
584        [ "$modres" -eq "3" ] && echo -en "\t|"
585        incoming=`ReadLine`
586    done
587    if  [ "$incoming" = "LVMFILES:" ] ; then
588        incoming=`ReadLine`
589        lvmversion=""
590        while [ "$incoming" != "" ] ; do
591            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
592                incoming=`ReadLine`
593                continue
594            fi
595            filelist=`GenerateListForFile "$incoming"`
596            for tool in $filelist ; do
597                lvmresolved=`readlink -f $tool`
598                if [ "$tool" = "$lvmresolved" ]; then
599                    echo "$tool" >> $tempfile
600                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
601                    if [ "$lvmversion" = "" ] ; then
602                        lvmversion=`$lvmresolved`
603                        echo "$lvmresolved" >> $tempfile
604                    fi
605                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
606                    if [ "$lvmversion" = "200" ]; then
607                        # pvdata and lvmcreate_initrd don't exist in LVM2
608                        case "$toolstripped" in
609                        "pvdata")
610                            continue
611                            ;;
612                        "lvmcreate_initrd")
613                            continue
614                            ;;
615                        esac
616                    fi
617                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
618                    if [ -e "$toolpath" ] ; then
619                        echo "$toolpath" >> $tempfile
620                        echo "$tool" >> $tempfile
621                    else
622                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
623                    fi
624                    if [ -e "$toolpath" ] ; then
625                        echo "$toolpath" >> $tempfile
626                        echo "$tool" >> $tempfile
627                    else
628                        echo "Where are your LVM-Tools? Couldn't find $tool"
629                    fi
630                else
631                    echo "$tool" >> $tempfile
632                fi
633            done
634            progress=$(($progress+1))
635            echo -en "\r\t\t\t\t\t\t\t\t"
636            i=$(($progress*100))
637            i=$(($i/$noof_lines))
638            echo -en "$i"
639            echo -en "%"
640            modres=$(($progress%4))
641            [ "$modres" -eq "0" ] && echo -en "\t/"
642            [ "$modres" -eq "1" ] && echo -en "\t-"
643            [ "$modres" -eq "2" ] && echo -en "\t\\"
644            [ "$modres" -eq "3" ] && echo -en "\t|"
645            incoming=`ReadLine`
646        done
647    fi
648    echo -en "$DONE\nMaking complete dependency list"
649
650    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
651    mv -f $tempfile.new $tempfile
652    > $outfile.pre
653    progress=0
654    noof_lines=`cat $tempfile | wc -l`
655    echo "---------------------------------" >> $LOGFILE
656    echo "List of dependencies:             " >> $LOGFILE
657    echo "---------------------------------" >> $LOGFILE
658    for fname in `cat $tempfile` ; do
659        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
660        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
661        progress=$(($progress+1))
662        echo -en "\r\t\t\t\t\t\t\t\t"
663        i=$(($progress*100))
664        i=$(($i/$noof_lines))
665        echo -en "$i"
666        echo -en "%"
667        modres=$(($progress%4))
668        [ "$modres" -eq "0" ] && echo -en "\t/"
669        [ "$modres" -eq "1" ] && echo -en "\t-"
670        [ "$modres" -eq "2" ] && echo -en "\t\\"
671        [ "$modres" -eq "3" ] && echo -en "\t|"
672    done
673    if [ _"$MONDO_SHARE" != _"" ]; then
674        mkdir -p $bigdir/tmp
675        mkdir -p $bigdir/sbin
676        mkdir -p $bigdir/bin
677        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
678            LogIt "\nIncorporating post-nuke tarball"
679            old_pwd=`pwd`
680            cd $bigdir
681            tar -zxf $MINDI_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
682            cd $old_pwd
683        fi
684        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
685            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
686        else
687            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
688            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
689            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
690            Die "Odd."
691        fi
692        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
693        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
694            LogIt "Incorporating NFS-related settings"
695            for r in NFS-* ISO-PREFIX ; do
696                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
697                echo "Copying $r to ramdisk" >> $LOGFILE
698            done
699        fi
700    fi
701    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
702    rm -f $tempfile $outfile.pre
703    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
704    return $res
705}
706
707
708GenerateListForFile() {
709    local files_found loc fname incoming i res
710    incoming="$1"
711    files_found=""
712    res=0
713
714    for fname in $incoming ; do
715        files_found="$files_found `LocateFile $fname`"
716    done
717
718    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
719}
720
721
722# Returns all disk devices which are part of a raid array
723GetAllRaidMembers() {
724    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
725}
726
727
728GetFileSizeList() {
729    local i
730    for i in `find $1 -type d -o -print` ; do
731        du -sk $i
732    done
733}
734
735
736GetHomeDir() {
737    local res loc
738    loc=`which $1 2>/dev/null`
739    res=`file $loc | $AWK '{print $NF;}'`
740    dirname $res
741}
742
743
744# Check kernel filesystem capabilites for accessing initrd image
745#
746# Interface definition:
747# param #1: absolute path to kernel image
748GetInitrdFilesystemToUse() {
749
750    # interface test: make sure we have one parameter
751    if [ $# -ne 1 ]; then
752        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
753    fi
754
755    # interface parameters
756    local lvKernelImage=$1
757
758    # local constants (filesystem magic strings)
759    local lcMagicCramfs="<3>cramfs: wrong magic"
760    local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
761    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs..."
762
763    # local variables
764    local lvOffset
765    local lvScanRes
766    local lvUseFilesystem
767
768    # say where we are.
769    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
770
771    # verify that file exists
772    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
774    # Kernel may be gzip compressed
775    file $lvKernelImage 2>&1 | grep -q gzip
776    if [ $? -eq 0 ]; then
777        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
778    else
779        # get offet of gzip magic "1f8b0800" in file
780        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}'`
781        [ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
782        lvOffset=`expr $lvOffset / 2`
783        echo "  GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
784
785        # scan kernel image for initrd filessystem support
786        lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
787    fi
788
789    # determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
790    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
791        lvUseFilesystem="ext2fs"
792    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
793        lvUseFilesystem="initramfs"
794    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
795        lvUseFilesystem="cramfs"
796    else
797        lvUseFilesystem="UNSUPPORTED"
798    fi
799
800    # say what we are using
801    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
802
803    # return file system to use
804    echo "$lvUseFilesystem"
805
806}
807
808# Searches parent raid device of given disk device
809# $1: disk device (i.e. /dev/hda1)
810GetParentRaidDev() {
811    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
812}
813
814
815# Searches members of raid device
816# $1: raid device (/dev/md...)
817GetRaidDevMembers() {
818    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
819}
820
821
822HackPathsToFailsafe() {
823    local incoming newpath kver stub i pwd
824    kver=`uname -r`
825    incoming=`ReadLine`
826    pwd=`pwd`
827    cd $MINDI_TMP
828    while [ "$incoming" != "" ] ; do
829        stub=`basename $incoming`
830        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
831        for i in $newpath ; do
832            echo "$i"
833        done
834        read incoming
835    done
836    cd $pwd
837}
838
839
840ListAllPartitions() {
841    local res currline partition all_partitions ap_orig remaining i j
842
843    grep -vx " *#.*" $MY_FSTAB | grep -vx " *none.*" | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/fdd|cdr|zip|floppy/ {print $1}'
844    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
845    if [ -e "/vmfs/volumes" ]; then
846        # For VMWare ESX 3 get the device names of these volumes
847        vdf -P | grep -E '/vmfs/volumes' | awk '{print $1}'
848    fi
849    return
850}
851
852
853ListImagesForUser() {
854    local path fname
855    path=$1
856    echo -en "In the directory '$path' you will find the images:-\n"
857    for fname in `ls $path | grep -F mindi-` ; do
858        printf "%19s " $fname
859    done
860    echo " "
861}
862
863
864ListKernelModulePaths() {
865    local module_list module fname oss r kern
866    oss="/root/oss/modules"
867    module_list="$MODULES"
868    # Remove unwanted modules from list
869    for i in $DENY_MODS; do
870        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
871        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
872    done
873###
874### Sq-Modification ... Use kernelname for module search path if specified
875###
876    # kern="`uname -r`"
877    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
878    then
879        kern=${kernelname}
880    else
881        kern="`uname -r`"
882    fi
883###
884### Sq-Mod End
885###
886    for module in $module_list $EXTRA_MODS ; do
887        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
888        echo "module $module --> $r" >> $LOGFILE
889        [ "$r" ] && echo "$r"
890        [ -f "$oss" ] && find $oss | grep -F $module
891    done
892    find /lib/modules/$kern/modules.* -type f 2> /dev/null
893    [ -f "$oss" ] && find $oss.* 2> /dev/null
894}
895
896#
897# Critical function which computes all dependencies (dyn. lib.)
898# for a list of binaries
899#
900LocateDeps() {
901    local incoming fname deps
902    incoming="$*"
903    for fname in $incoming ; do
904        if [ ! -e "$fname" ] ; then
905            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
906            if echo $fname | grep lvm &> /dev/null ; then
907                echo "This warning only affects you if you are using LVM." >> $LOGFILE
908                if echo "$MODULES" | grep lvm &> /dev/null ; then
909                    echo "I think you are, so please take heed!" >> $LOGFILE
910                else
911                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
912                fi
913            fi
914        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
915            echo "$fname is softlink" >> $LOGFILE
916        else
917            ldd $fname 2> /dev/null | ProcessLDD
918        fi
919    done
920}
921
922
923# Give all symlinks recursively of a full path name
924ReadAllLink() {
925    file="$1"
926
927    echo "$file"
928    if [ ! -h $file ]; then
929        return 0
930    fi
931
932    link=`readlink $file`
933    d=`dirname $file`
934    fchar=`echo $link | cut -c1`
935    # If mother dir is a link print it
936    if [ -h "$d" ]; then
937        echo "$d"
938        d=`readlink $d`
939    fi
940    if [ "$fchar" != "/" ]; then
941        # Relative or local link
942        ReadAllLink "$d/$link" 
943    else
944        # Absolute path
945        ReadAllLink $link 
946    fi
947}
948
949
950LocateFile() {
951    local i path fname_to_find location output resolved tmp stub cache_id loclist
952    fname_to_find="$1"
953    # It's an absolute path
954    if echo "$fname_to_find" | grep -x "/.*" ; then
955        output="$fname_to_find"
956        if [ -h "$output" ] ; then
957            output="`ReadAllLink $output` $output"
958        fi
959        echo "$output"
960        return 0
961    fi
962    # It's not an absolute path
963    output=""
964    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
965    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
966        [ -h "$path" ] && continue
967        [ ! -e "$path/$fname_to_find" ] && continue
968        output="$path/$fname_to_find $output"
969        if [ -h "$path/$fname_to_find" ] ; then
970            output="`ReadAllLink $path/$fname_to_find` $output"
971        fi
972    done
973    if [ "$output" = "" ] ; then
974        return 1
975    fi
976    echo "$output"
977    return 0
978}
979
980
981LogIt() {
982    if [ -e /dev/stderr ] ; then
983        echo -e "$1" >> /dev/stderr
984    elif [ -e /usr/bin/logger ] ; then
985        /usr/bin/logger -s $1
986    fi
987    echo -e "$1" >> $LOGFILE
988}
989
990
991# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
992MakeMondoConfigFile() {
993    local outfile use_lzo use_comp use_star
994    outfile=$1
995    > $outfile
996    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
997    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
998    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
999    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1000    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1001    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1002    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1003    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1004    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1005    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1006    echo "use-lzo $use_lzo" >> $outfile
1007    echo "use-gzip $use_gzip" >> $outfile
1008    echo "use-star $use_star" >> $outfile
1009    echo "use-comp $use_comp" >> $outfile
1010    echo "datestamp `date`" >> $outfile
1011    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/NFS-DEV           nfs-dev           $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1033}
1034
1035
1036MakeMountlist() {
1037    local scratchdir mountlist all_partitions current_partition \
1038partition_size partition_format outstring partition_number \
1039partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1040absolute_partition old_partition_fmt current_lvolume
1041
1042    echo "Your raw fstab file looks like this:" >> $LOGFILE
1043    echo "------------------------------------" >> $LOGFILE
1044    cat $MY_FSTAB >> $LOGFILE
1045    echo "Your mountlist will look like this:" | tee -a $LOGFILE
1046    echo "-----------------------------------" >> $LOGFILE
1047
1048# scratchdir, mountlist(OUT)
1049    scratchdir=$MINDI_TMP
1050    mountlist=$1
1051
1052# NB: partition = device
1053# NB: mountpt = where the device is mounted
1054
1055    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1056
1057    [ "$mountlist" != "" ] && rm -Rf $mountlist
1058    > $mountlist
1059    all_partitions=""
1060   
1061    if [ $LVM != "false" ]; then
1062        echo -en "Analyzing LVM...\n"
1063        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1064        if [ $? -ne 0 ]; then
1065            LVM="false"
1066        fi
1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-32`
1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070#    echo "all partitions = $all_partitions" > /dev/stderr
1071    for i in $IMAGE_DEVS ; do
1072        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1073    done
1074    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1075    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
1077    for c_p in $all_partitions ; do
1078        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] && continue
1079        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1080        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1081            current_partition=`readlink -f $c_p`
1082            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
1083            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1084        else
1085            current_partition="$c_p"
1086        fi
1087        [ "$c_p" = "none" ] && continue
1088        redhat_label=""
1089        label=""
1090        uuid=""
1091        absolute_partition=`readlink -f $c_p`
1092        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1093
1094        # Detects noauto partitions not mounted and exclude them
1095        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1096        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1097            continue
1098        fi
1099
1100        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1101        # current_partition contains only first column of /etc/fstab
1102        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
1103            str_to_find_fmt_with=$current_partition
1104            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1105            actual_dev=""
1106
1107            # 1st try, findfs - the RHEL way of finding labels and their partitions
1108            if [ -x "/sbin/findfs" ]; then
1109                actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
1110            fi
1111   
1112            # 2nd try : blkid, the good way for all LABEL except swap
1113            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1114                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1115                # For LVM FS it will give a /dev/dm-# which should then be converted
1116                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1117                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1118                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1119                    for dev in `ls /dev/mapper/*`; do
1120                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1121                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1122                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1123                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1124                            break
1125                        fi
1126                    done
1127                fi
1128            fi
1129   
1130            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1131            # For LVM gives a /dev/mapper entry
1132            if [ "x$actual_dev" = "x" ]; then
1133                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1134            fi
1135   
1136            # 4th try, with vol_id
1137            # SWAP only
1138            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1139                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1140                for dev_swap in $list_swaps ; do
1141                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1142                    if [ "x$dev_exists" != "x" ]; then
1143                        actual_dev=$dev_swap
1144                        break;
1145                    fi
1146                done
1147            fi
1148
1149            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1150            # LABEL=SW-cciss/c0d0p3 (RDP)
1151            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1152            # SWAP only
1153            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1154                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1155                    do
1156                        # Location of the swap label for kernel 2.6
1157                        try_dev_label=`dd bs=1 count=16 skip=1052 if=$try_dev 2> /dev/null`
1158                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1159                            actual_dev=$try_dev
1160                        fi
1161                    done
1162            fi
1163
1164            # Check if one of all those tries has known success
1165            if [ "x$actual_dev" != "x" ]; then
1166                current_partition=$actual_dev
1167            else
1168                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1169            fi
1170        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1171        # current_partition contains only first column of /etc/fstab
1172        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1173            str_to_find_fmt_with=$current_partition
1174            uuid=`echo "$current_partition" | cut -d'=' -f2`
1175            actual_dev=""
1176
1177            # 1st try, findfs - the RHEL way of finding labels and their partitions
1178            if [ -x "/sbin/findfs" ]; then
1179                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1180            fi
1181   
1182            # 2nd try : blkid, the good way for all UUID except swap
1183            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1184                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1185                # For LVM FS it will give a /dev/dm-# which should then be converted
1186                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1187                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1188                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1189                    for dev in `ls /dev/mapper/*`; do
1190                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1191                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1192                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1193                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1194                            break
1195                        fi
1196                    done
1197                fi
1198            fi
1199   
1200            # 3th try, with vol_id
1201            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1202                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1203                for dev in $list_dev ; do
1204                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1205                    if [ "x$dev_exists" != "x" ]; then
1206                        actual_dev=$dev
1207                        break;
1208                    fi
1209                done
1210            fi
1211
1212            # 4th try, with dumpuuid (VMWare only ?) for swap
1213            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1214                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1215                for dev in $list_dev ; do
1216                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1217                    if [ "x$dev_exists" != "x" ]; then
1218                        actual_dev=$dev
1219                        break;
1220                    fi
1221                done
1222            fi
1223
1224            # Check if one of all those tries has known success
1225            if [ "x$actual_dev" != "x" ]; then
1226                current_partition=$actual_dev
1227            else
1228                Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1229            fi
1230        else
1231            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1232            # they use symlinks in fstab unrelated to what is shown in mount !
1233            if [ _"$partition_mountpt" = _"" ]; then
1234                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1235                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1236                            str_to_find_fmt_with=$tmpp
1237                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1238                            break;
1239                        fi
1240                done
1241            else
1242                str_to_find_fmt_with=$current_partition
1243            fi
1244        fi
1245
1246        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1247        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1248        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1249        # the former is then a link to the latter, so we test whether
1250        # $current_partition is actually such a link or not and set
1251        # $current_lvolume accordingly. On Debian you may find more than one answer
1252        # so we remove the one corresponding to /dev/.static
1253        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1254        # principle is the same and we need to find the link to it as well.
1255        # Note that $current_lvolume may well be an
1256        # ordinary device. It is just to make sure that we feed the right value
1257        # into any of the LVM tools if possible.
1258
1259        current_lvolume="$current_partition"
1260        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1261            # .static dir are a Debian specificity
1262            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1263            echo $current_lvolume | grep -q ' '
1264            if [ $? -eq 0 ]; then
1265                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1266            fi
1267        fi
1268        #
1269        # End of LVM device style variation code (other than $current_lvolume).
1270
1271        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1272            # Size computed via LVM not directly
1273            partition_size="lvm"
1274        else
1275            partition_size=`SizeOfPartition $current_partition`
1276            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1277            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1278            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1279                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition" | $AWK '{print $3}'`
1280                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1281                [ "$partition_format" != "swap" ] && partition_format="swap"
1282                if [ "$partition_size" = "" ] ; then
1283                    totalsize=0
1284                    items=0
1285                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1286                        totalsize=$(($totalsize+$i))
1287                        items=$(($items+1))
1288                    done
1289                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1290                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1291                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1292                fi
1293            fi
1294        fi
1295        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1296        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1297        if [ "$partition_mountpt" = "" ] ; then
1298            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1299                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1300                    partition_mountpt="raid"
1301                    partition_format="raid"
1302                else
1303                    partition_mountpt="lvm"
1304                    partition_format="lvm"
1305                fi
1306            fi
1307        fi
1308        psz=$partition_size
1309        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1310        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1311        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1312            partition_mountpt="image"
1313            old_partition_fmt=$partition_format
1314            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1315            partition_size=$(($partition_size+1)); # just in case
1316            if [ "$partition_format" = "Linux" ] ; then
1317                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1318                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1319                partition_format=$old_partition_fmt
1320            fi
1321        fi
1322        if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | grep -F " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
1323            echo "Excluding $current_partition from mountlist" >> $LOGFILE
1324            continue
1325        fi
1326        if [ ! "$partition_mountpt" ] ; then
1327            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1328            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1329                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1330                [ "$partition_format" ] && break
1331            done
1332            echo "------- $FDISK log end ------------" >> $LOGFILE
1333            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1334                partition_format="compaq"
1335            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1336                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1337                continue
1338            fi
1339        fi
1340        if [ "$redhat_label" ]; then
1341            label="$redhat_label"
1342        elif [ "$uuid" ]; then
1343            label="$uuid"
1344        fi
1345        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1346        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1347        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1348        if [ "$current_partition" = "" ] ; then
1349            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1350        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1351            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1352                partition_mountpt=raid
1353                partition_format=raid
1354                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1355                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1356            else
1357                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1358            fi
1359        elif [ "$partition_format" = "" ] ; then
1360            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1361        elif [ "$partition_size" = "" ] ; then
1362            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1363        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1364            continue
1365        else
1366            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1367                echo "Stupid bastard..." >> $LOGFILE
1368                partition_format="vfat"
1369            fi
1370            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1371            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1372        fi
1373    done
1374}
1375
1376
1377MakeSureNumberIsInteger() {
1378    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1379    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1380    echo "result = '$res'"
1381        Die "$1 should be an integer"
1382    fi
1383}
1384
1385
1386MakeSyslinuxMessageFile() {
1387    mkdir -p $1
1388    rmdir $1
1389    echo -en "  " > $1
1390    if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1391        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ >> $1.tmp
1392    else
1393        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' '\\r' 'on' 'an' '\/' '`uname -r`' 'on' 'an' '`uname -m`/ >> $1.tmp
1394    fi
1395    sed s/%r/"`uname -r`"/ $1.tmp | sed s/%t/"`hostname`"/ > $1
1396    rm -f $1.tmp
1397    if [ "$CDRECOVERY" != "yes" ] ; then
1398        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1399            echo -en "Press <enter> to continue.\n" >> $1
1400        elif [ ! "$MINDI_TMP" ] ; then
1401            echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" >> $1
1402            if [ -e "$MINDI_LIB/memtest.img" ] ; then
1403                echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n" >> $1
1404            fi
1405        else
1406            echo -en "$BOOT_MEDIA_MESSAGE" >> $1
1407        fi
1408    else
1409        echo -en " \
1410To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1411CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" >> $1
1412    fi
1413}
1414
1415
1416OfferToMakeBootableISO() {
1417    local i old_pwd
1418    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1419        echo -en "Shall I make a bootable CD image? (y/[n]) "
1420        read i
1421        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1422    fi
1423    if [ _"$MINDI_TMP" = _"" ]; then
1424        Die "MINDI_TMP undefined"
1425    fi
1426    rm -Rf $MINDI_TMP/iso
1427    mkdir -p $MINDI_TMP/iso/{images,archives,isolinux}
1428    cp -f $1/*.gz $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $1/*.gz to $MINDI_TMP/iso/images"
1429    old_pwd=`pwd`
1430    cd $MINDI_TMP/iso
1431    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1432    for i in memdisk memtest.bin memtest.img ; do
1433        j=$MINDI_LIB/$i
1434        k=$MINDI_TMP/iso/isolinux
1435        if [ -e "$j" ] ; then
1436            LogIt "Copying $j to $k"
1437            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1438            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1439            if [ _"$MONDO_SHARE" != _"" ]; then 
1440                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1441            fi
1442        fi
1443    done
1444    MakeSyslinuxMessageFile $MINDI_TMP/iso/isolinux/message.txt
1445    cp $kernelpath $MINDI_TMP/iso/isolinux/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/isolinux/vmlinuz). Did you run out of disk space?"
1446    cp $MINDI_TMP/mindi.rdz $MINDI_TMP/iso/isolinux/initrd.img 2>> $LOGFILE || Die "Cannot copy mindi.rdz ($MINDI_TMP/mindi.rdz) to $MINDI_TMP/iso/isolinux/initrd.img. Did you run out of disk space?"
1447    if [ _"$MONDO_SHARE" != _"" ]; then 
1448        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1449        cp $MINDI_TMP/mindi.rdz $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy mindi.rdz ($MINDI_TMP/mindi.rdz) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1450    fi
1451    [ -e "$iso_cfg_file" ] || Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1452    cd $MINDI_TMP/iso/isolinux
1453    cat $iso_cfg_file | HackSyslinuxFile $ramdisk_size $MINDI_TMP/iso > isolinux.cfg || Die "Cannot copy isolinux.cfg to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
1454    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1455        perl -pi -e 's/interactive/iso/' isolinux.cfg
1456    fi
1457    if [ "$ARCH" != "ia64" ] ; then
1458        cp $ISOLINUX isolinux.bin 2> /dev/null || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
1459        cp $ISOLINUX ../ 2>> $LOGFILE
1460    fi
1461    cd $MINDI_TMP/iso
1462    if [ "$ARCH" != "ia64" ] ; then
1463        if [ _"$MONDO_SHARE" != _"" ]; then 
1464            cp -f $MINDI_TMP/iso/isolinux/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1465            cp -f $MONDO_SHARE/autorun . 2>> $LOGFILE
1466        fi
1467        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1468    else
1469        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c isolinux/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1470        rm -f images/mindi-bootroot.$BOOT_SIZE.img
1471    fi
1472    if [ "$?" -ne "0" ] ; then
1473        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1474        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1475        echo "$ISO_CMD returned the following errors:-"
1476        cat $MINDI_TMP/mkisofs.log
1477        LogIt "Failed to create ISO image."
1478    else
1479        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1480    fi
1481    rm -f $MINDI_TMP/mkisofs.log
1482    cd $old_pwd
1483}
1484
1485
1486OfferToMakeBootableUSB() {
1487    local i old_pwd
1488    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1489        echo -n "Shall I make a bootable USB image ? (y/[n]) "
1490        read i
1491        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1492        if [ "$USBDEVICE" = "" ]; then
1493            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1494            read dev
1495            USBDEVICE=$dev
1496        fi
1497        echo "WARNING: This will erase all content on $USBDEVICE"
1498        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1499    fi
1500    if [ _"$MINDI_TMP" = _"" ]; then
1501        Die "MINDI_TMP undefined"
1502    fi
1503    rm -Rf $MINDI_TMP/usb
1504    mkdir -p $MINDI_TMP/usb
1505    USBPART="${USBDEVICE}1"
1506
1507    echo -en "Transforming $USBDEVICE in a Bootable device " 
1508    echo -en "."
1509    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1510    echo "Checking $USBDEVICE" >> $LOGFILE
1511    $FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1512    if [ $? -ne 0 ]; then
1513        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1514        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1515        exit -1
1516    fi
1517    echo -en "."
1518    echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1519    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1520    echo "Erasing $USBDEVICE" >> $LOGFILE
1521    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1522d
1523d
1524d
1525d
1526n
1527p
15281
1529
1530
1531t
1532b
1533a
15341
1535w
1536EOF
1537    if [ $? -ne 0 ]; then
1538        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1539        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1540        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1541        MindiExit -1
1542    fi
1543    echo -en "."
1544    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1545    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1546    if [ $? -ne 0 ]; then
1547        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1548        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1549        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1550        MindiExit -1
1551    fi
1552    echo -en "."
1553    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1554    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1555    if [ $? -ne 0 ]; then
1556        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1557        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1558        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1559        MindiExit -1
1560    fi
1561    echo -en "."
1562    mkdir -p $MINDI_TMP/usb/images
1563    cp -f $1/*.img $1/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1564    echo -en "."
1565    old_pwd=`pwd`
1566    cd $MINDI_TMP/usb
1567    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1568    for i in memdisk memtest.bin memtest.img ; do
1569        j=$MINDI_LIB/$i
1570        k=$MINDI_TMP/usb
1571        if [ -e "$j" ] ; then
1572            LogIt "Copying $j to $k"
1573            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1574            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1575        fi
1576    done
1577    echo -en "."
1578    MakeSyslinuxMessageFile $MINDI_TMP/usb/message.txt
1579    echo -en "."
1580    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/syslinux/vmlinuz). Did you run out of disk space?"
1581    echo -en "."
1582    cp $MINDI_TMP/mindi.rdz $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1583    echo -en "."
1584    [ -e "$iso_cfg_file" ] || Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1585    cat $sys_cfg_file | HackSyslinuxFile $ramdisk_size $MINDI_TMP/usb > syslinux.cfg || Die "Cannot copy syslinux.cfg from mindi_home to $MINDI_TMP/usb - did you run out of disk space?"
1586    echo -en "."
1587    if [ "$NFS_DEV" != "" ] ; then
1588        perl -pi -e 's/interactive/iso/' syslinux.cfg
1589    fi
1590    cd $old_pwd
1591    echo -en "."
1592    umount $MINDI_TMP/usb
1593    if [ "$ARCH" != "ia64" ] ; then
1594        syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1595        if [ "$?" -ne "0" ] ; then
1596            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1597            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1598            LogIt "Failed to create USB image."
1599        else
1600            echo -e "$DONE"
1601            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1602        fi
1603        rm -f $MINDI_TMP/syslinux.log
1604    else
1605        echo "No USB boot support for ia64" | tee -a $LOGFILE
1606        MindiExit -1
1607    fi
1608    echo -en "."
1609}
1610
1611
1612MakeMessageFile() {
1613    if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1614        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/
1615    else
1616        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/
1617    fi
1618    if [ _"$MONDO_SHARE" != _"" ]; then
1619        if [ "$CDRECOVERY" != "yes" ] ; then
1620            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1621                echo -en "Press <enter> to continue.\n"
1622            elif [ ! "$MINDI_TMP" ] ; then
1623                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1624            else
1625                echo -en "$BOOT_MEDIA_MESSAGE"
1626            fi
1627        fi
1628    fi
1629    if [ "$CDRECOVERY" = "yes" ] ; then
1630        echo -en "\
1631To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1632CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1633    fi
1634    echo -en "\n\n\n"
1635}
1636
1637
1638MakeLiloConfFile() {
1639    local options i ooo
1640    options=""
1641
1642    if [ "$ARCH" != "ia64" ] ; then
1643        echo -en "boot=/dev/loop0\ndisk=/dev/loop0\n"
1644        echo -en "install=/boot.b\nmap=/boot.map\n"
1645    fi
1646    if [ "$CDRECOVERY" = "yes" ] ; then
1647        echo -en "default=RESTORE\n"
1648    elif [ _"$MONDO_SHARE" != _"" ]; then
1649        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1650            echo -en "default=iso\n"
1651        else
1652            echo -en "default=interactive\n"
1653        fi
1654    else
1655        echo -en "default=expert\n"
1656    fi
1657
1658    echo -en "prompt\n"
1659    if [ "$ARCH" != "ia64" ] ; then
1660        echo -en "vga=normal\nbackup=/dev/null\nmessage=/message\n"
1661    fi
1662    if [ "$CDRECOVERY" != "yes" ] ; then
1663        echo -en "timeout=300\n"
1664    fi
1665    echo -en "\n"
1666    if [ "$CDRECOVERY" = "yes" ] ; then
1667        options="RESTORE expert"
1668    else
1669        if [ _"$MONDO_SHARE" != _"" ]; then
1670            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1671                options="iso"
1672            else
1673                options="interactive expert compare iso nuke isonuke"
1674# hda hdb hdc hdd"
1675            fi
1676        else
1677            options="expert"
1678        fi
1679    fi
1680    for i in $options ; do
1681        ooo=$i
1682        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1683        if [ "$ARCH" = "ia64" ] ; then
1684            rootpart="root=/dev/ram0\n\t"
1685        else
1686            rootpart=""
1687        fi
1688        outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/mindi.rdz\n\t${rootpart}append=\" rw ramdisk=$ramdisksize ramdisk_size=$ramdisksize maxcpus=1 $ooo_mode $ADDITIONAL_BOOT_PARAMS"
1689   
1690        outstr=$outstr" $ooo_mode"
1691        outstr=$outstr"\"\n"
1692        echo -en "$outstr"
1693    done
1694}
1695
1696
1697PrepareBootDiskImage_LILO() {
1698    local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1699    imagesdir=$1
1700    kernelpath=$2
1701    ramdisksize=$3
1702
1703    retval=0
1704    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1705    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1706    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
1707    echo -en "..."
1708    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1709    mountpoint=$MINDI_TMP/mountpoint.$$
1710    mkdir -p $mountpoint
1711    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1712    if [ "$ARCH" = "ia64" ] ; then
1713        mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1714        t=vfat
1715    else
1716        echo "Creating ext2 filesystem on $imagefile" >> $LOGFILE
1717        mke2fs -N 26 -m 0 -F $imagefile &> /dev/null || Die "Unable to create an ext2 file system on $imagefile"
1718        t=ext2
1719    fi
1720    mount -t $t -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1721    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1722    mkdir -p $mountpoint/etc
1723    if [ "$ARCH" != "ia64" ] ; then
1724        liloconf=$mountpoint/etc/lilo.conf
1725    else
1726        liloconf=$mountpoint/elilo.conf
1727    fi
1728    old_pwd=`pwd`
1729    cd $mountpoint
1730    if [ "$ARCH" != "ia64" ] ; then
1731        tar -zxf $MINDI_LIB/dev.tgz || LogIt "Cannot untar dev.tgz"
1732    fi
1733    cd $old_pwd
1734    # BERLIOS : Useless and generating errors on CentOS ? (losetup miss a param)
1735    #losetup /dev/loop0 > /dev/null 2> /dev/null
1736    #[ "$?" -eq "0" ] || losetup /dev/loop0 -d || Die "Please free up /dev/loop0 by typing   'losetup /dev/loop0 -d'.\nReboot if necessary."
1737    CopyBootBFile $mountpoint/boot.b
1738
1739    MakeLiloConfFile > $liloconf
1740
1741    # Copy it so that CD-ROM menu entry is satisfied
1742    if [ "$ARCH" = "ia64" ] ; then
1743        mountefi=0
1744        df -T | grep /boot/efi | grep -q vfat
1745        if [ $? -ne 0 ]; then
1746            mount /boot/efi
1747            if [ $? -ne 0 ]; then
1748                echo "You have to mount your EFI partition when using mindi"
1749                MindiExit -1
1750            fi
1751            mountefi=1
1752        fi
1753        el=`find /boot/efi -name elilo.efi`
1754        cp $el $mountpoint
1755        cp $liloconf $mountpoint
1756        if [ $mountefi -eq 1 ]; then
1757            umount /boot/efi 2>&1 > /dev/null
1758        fi
1759    fi
1760
1761    echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint..." >> $LOGFILE
1762    cp -f $MINDI_TMP/mindi.rdz $mountpoint 2>> $LOGFILE
1763    if [ "$?" -ne "0" ] ; then
1764        LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
1765        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1766        LogIt "Please unload some of your modules and try again."
1767        rm -f $MINDI_TMP/mtpt.$$
1768        LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
1769        retval=$(($retval+1))
1770    fi
1771    MakeMessageFile > $mountpoint/message
1772
1773    mkdir -p $mountpoint/tmp
1774    cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
1775    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1776        echo -en "image=/memtest.bin\nlabel=memtest\nn" >> $liloconf
1777        echo -en "image=/memdisk\nlabel=memtest\nappend=\"initrd=memtest.img\"\n" >> $liloconf
1778#        echo "Yep, this is a multi-function CD" > $mountpoint/MULTIFUNC
1779    fi
1780
1781    # copy the kernel across
1782    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1783    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1784    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1785    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1786    if [ "$?" -ne "0" ] ; then
1787        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1788        du -sk $mountpoint/* >> $LOGFILE
1789        echo "--- end of list of files ---" >> $LOGFILE
1790        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1791Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1792        rm -f $mountpoint/vmlinuz
1793        cd $old_pwd
1794        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1795        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1796    #   losetup /dev/loop0 -d
1797        rm -f $imagefile
1798        return 0
1799    fi
1800    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1801    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1802    echo "Free space left on image = $free_space KB" >> $LOGFILE
1803    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1804    # make it bootable
1805    rm -f $mountpoint/zero
1806    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1807    if [ ! "$KERN_DISK_MADE" ] ; then
1808        if [ "$ARCH" != "ia64" ] ; then
1809            $LILO_EXE $LILO_OPTIONS -r $mountpoint >> $LOGFILE 2>> $LOGFILE
1810        else
1811            /bin/true
1812        fi
1813    else
1814        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1815    fi
1816
1817    # BERLIOS  does not test necessarily what it expects
1818    if [ $? -ne "0" ] ; then
1819        if [ "`grep -F "/tmp/dev.0" $LOGFILE`" ] ; then
1820            LogIt "The '/tmp/dev.0' error is NOT Mindi's fault. It is LILO's."
1821            LogIt "Please reboot your PC as a workaround."
1822            Die "LILO sneezed and Mindi caught a cold. Please read the README / FAQ."
1823        fi
1824        echo "$LILO_EXE -r $mountpoint ...failed."
1825        echo -en "Press ENTER to continue."; read line
1826        LogIt "Cannot run lilo on $mountpoint\nPlease upgrade/downgrade your version of LILO. It has a bug."
1827        retval=$(($retval+1))
1828    fi
1829    cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
1830    if [ "$ARCH" = "ia64" ] ; then
1831        cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1832    fi
1833    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1834    echo -en "..."
1835    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1836    if [ "$retval" -eq "0" ] ; then
1837        echo -en "...$DONE\n"
1838        if [ "$KERN_DISK_MADE" ] ; then
1839            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1840        fi
1841    else
1842        echo -en "...failed\n"
1843        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1844        rm -f $imagefile
1845    fi
1846    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1847    return $retval
1848}
1849
1850
1851PrepareBootDiskImage_SYSLINUX() {
1852    local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1853    imagesdir=$1
1854    kernelpath=$2
1855    ramdisksize=$3
1856    do_boot_root_thingy=""
1857    local retval old_pwd
1858    retval=0
1859
1860    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1861    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1862    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
1863    echo -en "..."
1864    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1865    mountpoint=$MINDI_TMP/mountpoint.$$
1866    mkdir -p $mountpoint
1867    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1868    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1869    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1870    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1871
1872    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1873
1874    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1875    old_pwd=`pwd`
1876    MakeSyslinuxMessageFile $mountpoint/message.txt
1877    cd $mountpoint
1878    [ -e "$sys_cfg_file" ] || Die "Obi Wan, word up?"
1879    cat $sys_cfg_file | HackSyslinuxFile $ramdisk_size $mountpoint > syslinux.cfg || Die "Cannot copy syslinux.cfg from mindi_home to tmp_root"
1880    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1881        perl -pi -e 's/interactive/iso/' syslinux.cfg
1882    fi
1883    cd $old_pwd
1884    echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint/initrd.img..." >> $LOGFILE
1885    cp -f $MINDI_TMP/mindi.rdz $mountpoint/initrd.img 2>> $LOGFILE
1886    if [ "$?" -ne "0" ] ; then
1887        LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
1888        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1889        LogIt "Please unload some of your modules and try again."
1890        rm -f $MINDI_TMP/mtpt.$$
1891        LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
1892        retval=$(($retval+1))
1893    fi
1894
1895    mkdir -p $mountpoint/tmp
1896    cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
1897
1898    # copy the kernel across
1899    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1900    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1901    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1902    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1903    if [ "$?" -ne "0" ] ; then
1904        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1905        du -sk $mountpoint/* >> $LOGFILE
1906        echo "--- end of list of files ---" >> $LOGFILE
1907        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1908Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1909        rm -f $mountpoint/vmlinuz
1910        cd $old_pwd
1911        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1912        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1913
1914        rm -f $imagefile
1915        return 0
1916    fi
1917    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1918    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1919    echo "Free space left on image = $free_space KB" >> $LOGFILE
1920    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1921
1922    # make it bootable
1923    rm -f $mountpoint/zero
1924    mkdir -p $mountpoint/etc
1925    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1926    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1927    echo -en "..."
1928    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1929
1930    if [ "$retval" -eq "0" ] ; then
1931        echo -en "...$DONE\n"
1932        if [ "$KERN_DISK_MADE" ] ; then
1933            rm -f $imagefile
1934            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1935        fi
1936    else
1937        echo -en "...failed\n"
1938        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1939        rm -f $imagefile
1940    fi
1941    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1942    return $retval
1943}
1944
1945
1946PrepareDataDiskImages() {
1947    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles
1948
1949    imagesdir=$1
1950    rm -f $imagesdir/mindi.iso
1951    needlist=$MINDI_TMP/what-we-need.txt
1952    bigdir=$MINDI_TMP/bigdir
1953    mkdir -p $bigdir/usr/bin
1954
1955    lfiles="$DEPLIST_FILE"
1956    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
1957    cat $lfiles | GenerateGiantDependencyList $needlist $lines
1958    res=$?
1959    if [ "$YOUR_KERNEL_SUCKS" ]; then
1960        pwd=`pwd`
1961        cd $MINDI_TMP
1962        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
1963            tar cf - ./$i 2>> $LOGFILE | (cd $bigdir ; tar xf -) || Die "PDDI can't copy $i->$bigdir"
1964            if [ "`du -sk $i | cut -f1`" -lt "$(($CHOPSIZE*2))" ] ; then
1965                tar cf - $i 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1966            else
1967                ChopUpAndCopyFile $i $bigdir $CHOPSIZE $BIGNO
1968                BIGNO=$(($BIGNO+1))
1969            fi
1970        done
1971        for i in $EXTRA_MODS ; do
1972            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1973            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1974            for k in $j ; do
1975                if [ "`du -sk $k | cut -f1`" -lt "$CHOPSIZE" ] ; then
1976                    tar cf - $k 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1977                else
1978                    ChopUpAndCopyFile $k $bigdir $CHOPSIZE $BIGNO
1979                    BIGNO=$(($BIGNO+1))
1980                fi
1981                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1982            done
1983        done
1984        cd $pwd
1985    else
1986        ListKernelModulePaths >> $needlist
1987    fi
1988    if [ "$res" -ne "0" ] ; then
1989        Die "You have $res files present in dependency list\nbut absent from filesystem."
1990    fi
1991    FindAndAddUserKeyboardMappingFile
1992    mkdir -p $bigdir/tmp
1993    if [ _"$MONDO_SHARE" != _"" ]; then
1994        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1995        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1996    fi
1997    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1998    DropOptimizedLibraries $needlist $bigdir
1999    echo -en "Assembling dependency files"
2000    CopyDependenciesToDirectory < $needlist $bigdir
2001
2002    # also copy io.sys and msdos.sys, if we can find them
2003    for i in `mount | cut -d' ' -f3` ; do
2004        for j in io.sys msdos.sys ; do
2005            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2006        done
2007    done
2008
2009    # master boot record, too
2010    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2011    if [ "$i" ] ; then
2012        LogIt "Backing up $i's MBR"
2013        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2014        sleep 1
2015        sync
2016        j=$i
2017        [ -h "$j" ] && j=`readlink -f $j`
2018        LogIt "Creating /dev/boot_device ($j)"
2019        mkdir -p $bigdir/dev
2020        cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null || Die "Unable to create /dev/boot_device on ramdisk"
2021    fi
2022
2023    old_pwd=`pwd`
2024    cd $bigdir
2025
2026    [ -e "$MINDI_LIB/aux-tools" ] || Die "aux-tools not found in Mindi's home dir. Do you have multiple copies of Mindi lying around? Please delete them. No, don't e-mail me and ask how. ;) Use 'rm'."
2027    cp -Rdf $MINDI_LIB/aux-tools/* . 2>> $LOGFILE || LogIt "WARNING - error occurred while unzipping aux-tools"
2028    if [ -e "$MINDI_LIB/x11-tools.tgz" ] ; then
2029        tar -zxf $MINDI_LIB/x11-tools.tgz 2>> $LOGFILE || LogIt "WARNING - error occurred while unzipping x11-tools.tgz"
2030    fi
2031    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2032        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2033        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2034    fi
2035    #[ -d "/lib/dev-state" ] && cp --parents -pRdf /lib/dev-state . 2>> $LOGFILE
2036    [ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE | tar xf -
2037    cd $old_pwd
2038    echo -e "$DONE"
2039    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2040    MakeMountlist $MINDI_TMP/mountlist.txt
2041    mkdir -p $bigdir/tmp
2042    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2043    if [ _"$MONDO_SHARE" != _"" ]; then
2044        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2045    fi
2046    [ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm || LVM="false"
2047    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2048    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
2049    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
2050    if [ _"$MONDO_SHARE" != _"" ]; then
2051        for q in filelist.full.gz biggielist.txt ; do
2052            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2053            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2054        done
2055    fi
2056
2057    echo -en "Tarring and zipping the data content..."
2058    size_of_all_tools=`du -sk $bigdir | cut -f1`
2059    (cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null | gzip -9 > $imagesdir/all.tar.gz)
2060    du -sk $imagesdir/*gz >> $LOGFILE
2061    echo -e "$DONE"
2062
2063    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2064    rm -rf $bigdir
2065    rm -f $needlist
2066}
2067
2068
2069ProcessLDD() {
2070    local incoming f d nd bd bnd
2071    read incoming
2072    while [ "$incoming" != "" ]; do
2073        # We take the full path name of the dyn. lib. we want
2074        incoming=`echo "$incoming" | awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2075        for f in $incoming ; do
2076            # echo modified file name if one of the parent dir is a link
2077            # by replacing the original dirname by the destination of the link
2078            d="`dirname $f`"
2079            found="false"
2080            while [ "$d" != "/" ]; do
2081                if [ -h "$d" ]; then
2082                    nd=`readlink -f $d`
2083                    bd=`basename $d`
2084                    bnd=`basename $nd`
2085                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2086                    echo $d
2087                fi
2088                d="`dirname $d`"
2089            done
2090
2091            echo "$f"
2092            echo "`ReadAllLink $f`"
2093        done
2094        read incoming
2095    done
2096}
2097
2098
2099Prompt() {
2100    echo -en "$1"
2101    read line
2102}
2103
2104
2105ReadLine() {
2106    local i incoming
2107    read incoming
2108    i=0
2109    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2110        i=$(($i+1))
2111        read incoming
2112    done
2113    echo "$incoming"
2114}
2115
2116
2117ReplaceIndividualLine() {
2118    local orig_file new_file lino newstring lines_total lines_remaining
2119
2120    orig_file=$1.orig
2121    mv -f $1 $orig_file || Die "Cannot move $1 to $orig_file"
2122    new_file=$1
2123    lino=$2
2124    newstring="$3"
2125    if [ "$lino" = "" ] || [ "$lino" -lt "1" ] ; then
2126        echo "Can't find string" >> $LOGFILE
2127        return 1
2128    fi
2129    lines_total=`wc -l $orig_file | $AWK '{print $1;}'`
2130    lines_remaining=$(($lines_total-$lino))
2131    head -n$(($lino-1)) $orig_file > $new_file
2132    echo "$newstring" >> $new_file
2133    echo "# The above line was added by Mindi, at the user's instruction" >> $new_file
2134    tail -n$lines_remaining $orig_file >> $new_file
2135    echo "Replace line $lino of $new_file with user-specified line, '$newstring'" >> $LOGFILE
2136    [ -x "$orig_file" ] && chmod +x $new_file
2137    rm -f $orig_file
2138    return 0
2139}
2140
2141
2142SizeOfPartition() {
2143    local devpath drive res stub
2144    device=$1
2145    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2146        res=`SizeOfRaidPartition $device`
2147        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2148        echo "$res"
2149        return 0
2150    fi
2151    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2152    res=`$FDISK -s $device 2>> $LOGFILE`
2153    # end patch
2154    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2`
2155    [ "$res" = "" ] && res="-1"
2156    echo $res
2157    return 0
2158}
2159
2160
2161SizeOfRaidPartition() {
2162    local real_dev smallest_size silly tmp
2163
2164    silly=999999999
2165    smallest_size=$silly
2166
2167    for real_dev in `GetRaidDevMembers $1` ; do
2168        tmp=`SizeOfPartition $real_dev`
2169        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2170    done
2171
2172    if [ "$smallest_size" = "$silly" ] ; then
2173        echo "-1"
2174        return 1
2175    else
2176        echo "$smallest_size"
2177        return 0
2178    fi
2179}
2180
2181
2182StripComments()
2183{
2184    local tempfile
2185
2186    tempfile=$MINDI_TMP/$$.strip.txt
2187    cp -f $1 $tempfile 2>> $LOGFILE
2188    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2189    rm -f $tempfile
2190    echo "Stripped comments from $2" >> $LOGFILE
2191}
2192
2193
2194
2195StripExecutable()
2196{
2197    local tmpfile
2198
2199    tmpfile=$MINDI_TMP/stripped.$$.dat
2200    [ -d "$1" ] || [ -h "$1" ] && return
2201    cp -f $1 $tmpfile 2>> $LOGFILE
2202    strip $tmpfile 2> /dev/null
2203    if [ "$?" -eq "0" ] ; then
2204        cp -f $tmpfile $1 2>> $LOGFILE
2205        echo "Stripped binary $2" >> $LOGFILE
2206    fi
2207    rm -f $tmpfile
2208}
2209
2210
2211TryToFindKernelPath() {
2212    local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2213
2214    we_want_version=`uname -r`
2215    possible_kernels=""
2216    duff_kernels=""
2217   
2218    if [ "$ARCH" = "ia64" ] ; then
2219       root="/boot/efi/efi"
2220    else
2221       root="/"
2222    fi
2223    for fname in `find $root -maxdepth 2 -type f | grep -E 'lin|kern' | grep -Ev '^/proc/|^/net/'` ; do
2224        [ ! -e "$fname" ] && continue
2225        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2226        file $fname | grep -q gzip
2227        if [ "$?" -eq "0" ] ; then
2228            # Used by ia64
2229            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2230        else
2231            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2232        fi
2233        [ "$fkern_ver" = "" ] && continue
2234        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2235        [ -f "$fname" ] || continue
2236        [ -h "$fname" ] && continue
2237        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2238        file $fname | grep -q gzip
2239        if [ "$?" -eq "0" ] ; then
2240            # Used by ia64
2241            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2242                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2243                duff_kernels="$fname $duff_kernels"
2244            else
2245                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2246                possible_kernels="$fname $possible_kernels"
2247            fi
2248        else
2249            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2250                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2251                duff_kernels="$fname $duff_kernels"
2252            else
2253                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2254                possible_kernels="$fname $possible_kernels"
2255            fi
2256        fi
2257    done
2258    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2259        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2260    fi
2261    if [ ! "$possible_kernels" ] ; then
2262        LogIt "No kernel matches exactly. Are there any duff kernels?"
2263        possible_kernels="$duff_kernels"
2264        if [ ! "$possible_kernels" ] ; then
2265            LogIt "Sorry, no duff kernels either"
2266        else
2267            LogIt "I bet you're running Debian or Gentoo, aren't you?"
2268            LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2269        fi
2270    fi
2271    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort -u | tr '\n' ' '`
2272    noof_kernels=`CountItemsIn "$possible_kernels"`
2273    if [ "$noof_kernels" -eq "0" ] ; then
2274        LogIt "Could not find your kernel."
2275        if [ -e "/boot/vmlinuz" ] ; then
2276            LogIt "Using /boot/vmlinuz as a last resort."
2277            output=/boot/vmlinuz
2278        else
2279            output=""
2280        fi
2281    elif [ "$noof_kernels" -eq "1" ] ; then
2282        kernelpath=`echo "$possible_kernels" | sed s/' '//`
2283        echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2284        output="$kernelpath"
2285    else
2286        for i in $possible_kernels ; do
2287            if echo $i | grep "`uname -r`" ; then
2288                LogIt "OK, I used my initiative and found that "
2289                LogIt "$i is probably your kernel. "
2290                output="$i"
2291                return
2292            fi
2293        done
2294        if echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null ; then
2295            output=/boot/vmlinuz
2296            echo "Schlomo, this one's for you." >> $LOGFILE
2297        else
2298            LogIt "Two or more possible kernels found. You may specify any one of them and the "
2299            LogIt "boot disks will still work, probably. If one does not work, try another."
2300            LogIt "$possible_kernels"
2301            echo ""
2302        fi
2303    fi
2304    echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
2305}
2306
2307
2308TurnTgzIntoRdz() {
2309    local tgz_dir_fname rdz_fname ramdisksize tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2310
2311    tgz_dir_fname=$1
2312    rdz_fname=$2
2313    ramdisksize=$3
2314    kernelsize=$4
2315    maxsize=$(($BOOT_SIZE-$kernelsize))
2316    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2317    tempfile=$MINDI_TMP/temp.rd
2318    mountpoint=$MINDI_TMP/mnt1
2319    res=0
2320    echo -en "..."
2321    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2322    echo -en "..."
2323    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2324    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2325    echo -en "..."
2326    mkdir -p $mountpoint
2327    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2328    echo -en "..."
2329    old_pwd=`pwd`
2330    cd $mountpoint
2331    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2332    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2333
2334    cd dev || Die "Can't cd to dev"
2335    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2336    rm -f dev-entries.tgz
2337    cd ..
2338
2339    for w in insmod.static insmod.static.old ; do
2340        s=`which $w 2> /dev/null`
2341        if [ -e "$s" ] ; then
2342            tar cf - $s 2> /dev/null | tar xf -
2343        fi
2344    done
2345
2346    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2347
2348    # Handle the case where busybox and mount are dynamically linked
2349    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2350    if [ $? -eq 0 ]; then
2351        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2352        rm -f bin/mount $MINDI_TMP/busy.lis
2353        mountlis=`grep mount $DEPLIST_FILE`
2354        for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2355            if [ -f $f ]; then
2356                LocateDeps $f >> $MINDI_TMP/busy.lis
2357            fi
2358        done
2359        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null | tar xf -
2360        rm -f $MINDI_TMP/busy.lis
2361    fi
2362
2363    mkdir -p $mountpoint/tmp
2364    # Management of udev (which includes modprobe in rules)
2365    ps auxww | grep -v grep | grep -qw udevd
2366    if [ $? -eq 0 ]; then
2367        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2368        LogIt "udev device manager found"
2369        tar cf - /etc/udev 2> /dev/null | tar xf -
2370        # This avoids NIC remapping if on another machine at restore time on Debian at least
2371        rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2372        tar cf - /lib*/udev 2> /dev/null | tar xf -
2373        if [ -x /sbin/udevd ]; then
2374            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2375            lis=""
2376            # Get only the files which exist in that list
2377            # and potentially their symlink structure
2378            for i in $lis2; do
2379                if [ -h $i ]; then
2380                    j=$i
2381                    while [ -h $j ]; do
2382                        lis="$lis $j"
2383                        j=`readlink $j`
2384                    done
2385                    lis="$lis $j"
2386                elif [ -f $i ]; then
2387                    lis="$lis $i"
2388                fi
2389            done
2390            # And their deps
2391            LocateDeps $lis > $MINDI_TMP/udev.lis
2392            for i in $lis; do
2393                if [ "`echo $i | cut -c1`" = "/" ]; then
2394                    j=`echo $i | cut -c2-`
2395                    rm -f $j
2396                fi
2397            done
2398            tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null | tar xf -
2399            rm -f $MINDI_TMP/udev.lis
2400        else
2401            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2402            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2403            rm -f $mountpoint/tmp/USE-UDEV
2404        fi
2405    fi
2406
2407    # Management of potential HW info (Proliant only at the moment)
2408    rm -rf $MINDI_CACHE/bkphw
2409    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2410    if [ -d $MINDI_CACHE/bkphw ]; then
2411        LogIt "Hardware Information found and saved ..."
2412        cp -rp $MINDI_CACHE/bkphw .
2413        if [ -f $MINDI_CACHE/tools.files ]; then
2414            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2415            LocateDeps $lis > $MINDI_TMP/tools.lis
2416            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null | tar xf -
2417        fi
2418        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2419            mv -f $MINDI_CACHE/mindi-rsthw .
2420            chmod 755 ./mindi-rsthw
2421        fi
2422        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2423    fi
2424
2425    for w in cdrom groovy-stuff ; do
2426        mkdir -p mnt/$w
2427    done
2428    #if [ "$RUN_AFTER_INITIAL_BOOT_PHASE" ] ; then
2429        #ReplaceIndividualLine sbin/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" sbin/init | cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
2430    #fi
2431    if [ "$RUN_AFTER_BOOT_PHASE_COMPLETE" ] ; then
2432        ReplaceIndividualLine sbin/init `grep -n "#ABSORBENTANDYELLOWANDPOROUSISHE#" sbin/init | cut -d':' -f1` "$RUN_AFTER_BOOT_PHASE_COMPLETE"
2433    fi
2434
2435    tar cf - /dev/fd0*[1,2][4,7,8]* 2> /dev/null | tar xf -
2436
2437    cd $old_pwd
2438    echo -en "..."
2439    old_pwd=`pwd`
2440    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2441        cd $MINDI_TMP
2442        needed_modules_path=lib/modules/$FAILSAFE_KVER
2443    else
2444        cd /
2445        if [ "${kernelname}" != "" ]
2446        then
2447            needed_modules_path=lib/modules/${kernelname}
2448        else
2449            needed_modules_path=lib/modules/`uname -r`
2450        fi
2451    fi
2452
2453    needed_modules=""
2454    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
2455
2456    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2457        # For PXE boot
2458        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2459    fi
2460    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2461        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2462    fi
2463    for i in $DENY_MODS; do
2464        echo "Removing $i from the list of modules to load" >> $LOGFILE
2465        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2466    done
2467
2468    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2469    for i in $list_of_groovy_mods ; do
2470        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2471    done
2472
2473    for i in $needed_modules ; do
2474        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2475        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2476        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2477        tar cf - $i 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy $i to $mountpoint"
2478        # Uncompress modules if not using udev and native modprobe
2479        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2480            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2481                echo "Uncompressing $i" >> $LOGFILE
2482                gunzip -f $mountpoint/$i
2483            fi
2484        fi
2485    done
2486
2487    # Also copy modules.dep in case of udev so that normal modprobe works
2488    tar cf - /$needed_modules_path/modules.dep 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint"
2489
2490    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2491        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2492        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2493        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2494        rm -f $mountpoint/sbin/devfsd
2495    fi
2496    cd $old_pwd
2497    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2498    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2499    rm -f $mountpoint/zero
2500    if [ _"$MONDO_SHARE" != _"" ]; then
2501        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2502        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2503        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null || Die "Cannot copy mountlist to ramdisk"
2504        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2505        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2506        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2507        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2508        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2509        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2510    fi
2511    mkdir -p $mountpoint/proc
2512    echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2513    # Determine what filesystem to use for initrd image
2514    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2515    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2516    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2517    case "$gvFileSystem" in
2518    "ext2fs")
2519        # say what will be used
2520        echo "Creating an ext2 initrd image..." >> $LOGFILE
2521        # kernel expects linuxrc in ext2 filesystem
2522        ( cd $mountpoint && ln -sf sbin/init linuxrc )
2523        # unmount loop filesystem and create image file using the standard approach
2524        umount $mountpoint || Die "Cannot unmount $tempfile"
2525        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2526        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2527        ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2528        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2529        rm -f ${rdz_fname}.tmp
2530        # log that we are done
2531        echo "...done." >> $LOGFILE
2532    ;;
2533    "initramfs")
2534        # say what will be used
2535        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2536        # make sure that cpio is there
2537        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2538        # go into filesystem
2539        cd $mountpoint
2540        # kernel expects init in cpio filesystem
2541        ln -sf sbin/init init
2542        # create cpio image file and unmount loop filesystem
2543        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2544        cd $old_pwd
2545        umount $mountpoint || Die "Cannot unmount $tempfile"
2546        # log that we are done
2547        echo "...done." >> $LOGFILE
2548    ;;
2549    *)
2550        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2551    ;;
2552    esac
2553    if [ "$res" -eq "0" ] ; then
2554        echo -en "..."
2555    else
2556        echo -en "\rMade an rdz WITH ERRORS.           \n"
2557    fi
2558    return 0
2559}
2560
2561
2562WhichOfTheseModulesAreLoaded() {
2563    local modname loaded_modules
2564    loaded_modules="$MODULES"
2565    for modname in $1 ; do
2566        [ "`echo "$loaded_modules" | grep -w "$modname"`" ] && echo "$modname"
2567    done
2568}
2569
2570
2571
2572##############################################################################
2573#----------------------------------- Main -----------------------------------#
2574##############################################################################
2575
2576# Now we can create what we need
2577mkdir -p $MINDI_TMP
2578
2579# Purge from potential old run
2580if [ _"$MINDI_CACHE" = _"" ]; then
2581    Die "MINDI_CACHE undefined"
2582fi
2583rm -rf $MINDI_CACHE/* 2> /dev/null
2584mkdir -p $MINDI_CACHE
2585
2586if [ "$1" = "--printvar" ] ; then
2587    shift
2588    if [ _"$1" != _"" ] ; then
2589        set | grep -Ew "^$1" | cut -d= -f2
2590    fi
2591    MindiExit 0
2592fi
2593
2594> $LOGFILE
2595echo "mindi v$MINDI_VERSION" >> $LOGFILE
2596echo "$ARCH architecture detected" >> $LOGFILE
2597echo "mindi called with the following arguments:" >> $LOGFILE
2598echo "$@" >> $LOGFILE
2599echo "Start date : `date`" >> $LOGFILE
2600echo "-----------------------------" >> $LOGFILE
2601
2602[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2603
2604# Log some capital variables
2605[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2606echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2607echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2608echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2609[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2610echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2611if [ -f $MINDI_CONFIG ]; then
2612    echo "-----------------------------" >> $LOGFILE
2613    echo " Mindi configuration file    " >> $LOGFILE
2614    echo "-----------------------------" >> $LOGFILE
2615    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2616    echo "-----------------------------" >> $LOGFILE
2617fi
2618
2619
2620trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2621
2622# Sanity checks
2623which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2624which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2625which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2626which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2627if which awk &> /dev/null ; then
2628    if ! which gawk &> /dev/null ; then
2629        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2630    fi
2631fi
2632which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2633[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2634
2635[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2636
2637# Update the PATH variable if incomplete
2638if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2639    PATH=$PATH:/sbin:/usr/sbin
2640    export PATH
2641    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2642    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2643    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2644fi
2645
2646# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2647if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2648    source $MINDI_LIB/FindDistroFailsafe
2649    # Log kernel image
2650    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2651else
2652    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2653fi
2654
2655if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2656    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2657fi
2658
2659### BERLIOS
2660### Fix as it's not mandatory on ia64
2661if [ "$ARCH" = "ia64" ] ; then
2662    if which elilo &> /dev/null ; then
2663        LILO_EXE=elilo
2664    else
2665        LILO_EXE=`which false`
2666    fi
2667else
2668    FindIsolinuxBinary
2669    FindLiloBinary
2670fi
2671trap "Aborted" SIGTERM
2672DONE="\r\t\t\t\t\t\t\t\tDone.         "
2673CHOPSIZE=240
2674BIGNO=0
2675MAX_COMPRESSED_SIZE=1300
2676kernelpath=""
2677MONDO_ROOT=/var/cache/mondo
2678mkdir -p $MONDO_ROOT
2679
2680if [ -d "/proc/lvm" ]; then
2681    # LVM v1
2682    LVMCMD=""
2683    LVM="v1"
2684elif [ -d "/dev/mapper" ]; then
2685    # LVM v2
2686    LVMCMD="lvm"
2687    LVM="v2"
2688else
2689    LVM="false"
2690fi
2691echo "LVM set to $LVM" >> $LOGFILE
2692echo "----------" >> $LOGFILE
2693echo "mount result:" >> $LOGFILE
2694echo "-------------" >> $LOGFILE
2695mount >> $LOGFILE
2696echo "-------------" >> $LOGFILE
2697if [ -e /etc/raidtab ]; then
2698    echo "-------------" >> $LOGFILE
2699    echo "/etc/raidtab content:" >> $LOGFILE
2700    echo "-------------" >> $LOGFILE
2701    cat /etc/raidtab >> $LOGFILE
2702fi
2703echo "-------------" >> $LOGFILE
2704echo "cat /proc/cmdline:" >> $LOGFILE
2705echo "-------------" >> $LOGFILE
2706cat /proc/cmdline >> $LOGFILE
2707echo "-------------" >> $LOGFILE
2708echo "lsmod result:" >> $LOGFILE
2709echo "-------------" >> $LOGFILE
2710lsmod >> $LOGFILE
2711MODULES="`cat /proc/modules | awk '{print $1}'`"
2712if [ -x /usr/sbin/esxcfg-module ]; then
2713    echo "-------------" >> $LOGFILE
2714    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2715    echo "-------------" >> $LOGFILE
2716    echo "VMWare modules" >> $LOGFILE
2717    echo "-------------" >> $LOGFILE
2718    /usr/sbin/esxcfg-module -l >> $LOGFILE
2719    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | awk '{print $1}'`"
2720fi
2721echo "FORCE_MODS:" >> $LOGFILE
2722echo "-------------" >> $LOGFILE
2723echo $FORCE_MODS >> $LOGFILE
2724echo "-------------" >> $LOGFILE
2725echo "DENY_MODS:" >> $LOGFILE
2726echo "-------------" >> $LOGFILE
2727echo $DENY_MODS >> $LOGFILE
2728echo "-------------" >> $LOGFILE
2729echo "df result:" >> $LOGFILE
2730echo "----------" >> $LOGFILE
2731df -T >> $LOGFILE
2732echo "-------------" >> $LOGFILE
2733echo "Liste of extra modules is:" >> $LOGFILE
2734echo "$EXTRA_MODS" >> $LOGFILE
2735echo "-------------" >> $LOGFILE
2736
2737# Compute libata version
2738laver=`modinfo libata | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2739# If libata v2 is used then remove ide-generic as it will perturbate boot
2740if [ "`echo $MODULES | grep libata`" ]; then
2741    if [ "$laver" = "2" ]; then
2742        DENY_MODS="$DENY_MODS ide-generic"
2743        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2744        echo "-------------" >> $LOGFILE
2745    fi
2746fi
2747
2748if [ "$#" -ge "2" ] ; then
2749    if [ "$1" = "--max-compressed-size" ] ; then
2750        MAX_COMPRESSED_SIZE=$2
2751        shift; shift
2752    fi
2753fi
2754
2755FLOPPY_WAS_MOUNTED=""
2756for mtpt in /media/floppy /mnt/floppy /floppy ; do
2757    if mount | grep -w $mtpt &> /dev/null ; then
2758        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2759        umount $mtpt
2760    fi
2761done
2762
2763#
2764# If we have a USB device we need to store info
2765# and remove it from the parameters line
2766#
2767if [ "$#" -ne "0" ] ; then
2768    if [ "$1" = "--usb" ] ; then
2769        shift
2770        USBDEVICE=$1
2771        if [ _"$USBDEVICE" = _"" ]; then
2772            Die "No USB device specified"
2773        fi
2774        shift
2775    fi
2776fi
2777
2778if [ "$#" -ne "0" ] ; then
2779    if [ "$1" = "--findkernel" ] ; then
2780        res=`TryToFindKernelPath`
2781        # Avoids logfile content for mondo
2782        export MONDO_SHARE=""
2783        if [ "$res" = "" ] ; then
2784            MindiExit -1
2785        else
2786            echo "$res"
2787            MindiExit 0
2788        fi
2789    elif [ "$1" = "--locatedeps" ] ; then
2790        [ ! "$2" ] && Die "Please specify the binary to look at"
2791        LocateDeps $2
2792        # Avoids logfile content for mondo
2793        export MONDO_SHARE=""
2794        MindiExit $?
2795    elif [ "$1" = "--readalllink" ] ; then
2796        [ ! "$2" ] && Die "Please specify the binary to look at"
2797        ReadAllLink $2
2798        # Avoids logfile content for mondo
2799        export MONDO_SHARE=""
2800        MindiExit $?
2801    elif [ "$1" = "--makemountlist" ] ; then
2802        [ ! "$2" ] && Die "Please specify the output file"
2803        MakeMountlist $2
2804        # Avoids logfile content for mondo
2805        export MONDO_SHARE=""
2806        MindiExit $?
2807    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2808        echo "Mindi v$MINDI_VERSION"
2809        # Avoids logfile content for mondo
2810        export MONDO_SHARE=""
2811        MindiExit 0
2812    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2813        MONDO_TMP=$2
2814        # Change MINDI_TMP for the one provided by mondo
2815        # So that it can get back the built files
2816        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2817        rmdir $MINDI_TMP
2818        export MINDI_TMP=$MONDO_TMP
2819        mkdir -p $MINDI_TMP
2820        # This is the scratch dir in mondo - subdir images
2821        MINDI_CACHE=$3
2822        if [ _"$MINDI_CACHE" != _"" ]; then
2823            mkdir -p $MINDI_CACHE
2824        fi
2825        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2826###
2827### Sq-Modification...
2828### Attempt to locate kernel specific module path
2829### if module path is found then use it other wise use uname -r to set it...
2830###
2831        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2832        LogIt "kernelname = $kernelname"
2833        LogIt "kernelpath = $kernelpath"
2834        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2835        then
2836           LogIt "Module path for ${kernelpath} not found..."
2837           LogIt "using running kernel\'s modules."
2838           kernelname=`uname -r`
2839        else
2840           LogIt "Using modules for kernel: ${kernelname}"
2841        fi
2842###
2843### end of Sq-Modification
2844###
2845        TAPEDEV=$5
2846        TAPESIZE=$6
2847        FILES_IN_FILELIST=$7
2848        USE_LZO=$8
2849        CDRECOVERY=$9
2850        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
2851            IMAGE_DEVS=""
2852        else
2853            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
2854        fi
2855        if [ "${11}" ] ; then
2856            LILO_OPTIONS=""
2857    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2858        fi
2859        LAST_FILELIST_NUMBER=${12}
2860        ESTIMATED_TOTAL_NOOF_SLICES=${13}
2861        EXCLUDE_DEVS="${14}"
2862        USE_COMP="${15}"
2863        USE_LILO="${16}"
2864        USE_STAR="${17}"
2865        INTERNAL_TAPE_BLOCK_SIZE="${18}"
2866        DIFFERENTIAL="${19}"
2867        USE_GZIP="${20}"
2868        NOT_BOOT="${21}"
2869        [ "$USE_COMP" = "" ] && USE_COMP=yes
2870        [ "$USE_GZIP" = "" ] && USE_GZIP=no
2871        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2872        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2873        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2874        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2875        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2876        then
2877           LogIt "Module path for ${kernelpath} not found..."
2878           LogIt "using running kernel\'s modules."
2879           kernelname=`uname -r`
2880        else
2881           LogIt "Using modules for kernel: ${kernelname}"
2882        fi
2883        [ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2884        # MONDO_ROOT is the real scratchdir
2885        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
2886        if [ _"$MONDO_ROOT" != _"" ]; then
2887            mkdir -p $MONDO_ROOT
2888        else
2889            Die "MONDO_ROOT is undefined"
2890        fi
2891    else
2892        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2893        MindiExit -1
2894    fi
2895fi
2896[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
2897if [ "$CDRECOVERY" = "yes" ] ; then
2898    iso_cfg_file=$MINDI_LIB/isolinux-H.cfg
2899    sys_cfg_file=$MINDI_LIB/syslinux-H.cfg
2900else
2901    iso_cfg_file=$MINDI_LIB/isolinux.cfg
2902    sys_cfg_file=$MINDI_LIB/syslinux.cfg
2903fi
2904
2905[ -e "$iso_cfg_file" ] || Die "Cannot find $iso_cfg_file"
2906if [ _"$MONDO_SHARE" = _"" ]; then
2907    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2908    LogIt "Latest Mindi is available from http://www.mondorescue.org"
2909    LogIt "BusyBox sources are available from http://www.busybox.net"
2910    LogIt "------------------------------------------------------------------------------"
2911else
2912    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2913fi
2914if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2915    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
2916else
2917    LogIt "Unable to find mindi-busybox, please install it"
2918    MindiExit -1
2919fi
2920
2921# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2922insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2923for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2924    insmod $i >> $LOGFILE 2>> $LOGFILE
2925done
2926
2927KERN_DISK_MADE=""
2928
2929echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2930echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2931echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2932if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2933    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2934    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2935    MakeMountlist $MINDI_TMP/mountlist.txt
2936    mkdir -p $MINDI_TMP/small-all/tmp
2937    cd $MINDI_TMP/small-all
2938    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null || Die "Cannot copy small all.tar.gz"
2939    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
2940    sleep 2
2941    LogIt "Done. Exiting."
2942    MindiExit 0
2943fi
2944
2945if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2946    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2947fi
2948
2949if [ "$kernelpath" = "" ] ; then
2950    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2951    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2952    read ch
2953    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2954        USE_OWN_KERNEL="yes"
2955    else
2956        USE_OWN_KERNEL="no"
2957    fi
2958    if [ "$USE_OWN_KERNEL" = "yes" ]; then
2959        YOUR_KERNEL_SUCKS=""
2960        kernelpath=`TryToFindKernelPath`
2961        if [ "$kernelpath" = "" ] ; then
2962            echo -n "Please enter kernel path : "
2963            read kernelpath
2964        fi
2965    else
2966        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2967    fi
2968fi
2969if [ _"$MONDO_SHARE" = _"" ] && [ "$ARCH" != "ia64" ]; then
2970    USE_LILO=no
2971fi
2972if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
2973    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2974    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2975        source $MINDI_LIB/FindDistroFailsafe
2976        # Log kernel image
2977        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2978        kernelpath="$FAILSAFE_KBIN"
2979        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2980        LogIt "The failsafe kernel is $kernelpath.\n"
2981        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2982        LogIt "disks then it may still be a result of a problem with your kernel.\n"
2983        pwd=`pwd`
2984        cd $MINDI_TMP
2985        mkdir -p lib/modules
2986        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
2987        cd $pwd
2988    else
2989        kernelpath=$MINDI_LIB/vmlinuz
2990        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2991        LogIt "However, you are still running your kernel. If Mindi fails to create your"
2992        LogIt "disks then it may still be a result of a problem with your kernel."
2993        pwd=`pwd`
2994        cd $MINDI_TMP
2995        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
2996        cd $pwd
2997    fi
2998    YOUR_KERNEL_SUCKS="Your kernel sucks"
2999fi
3000echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3001[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
3002
3003[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3004
3005PrepareDataDiskImages $MINDI_CACHE
3006ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3007rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3008ramdisk_size=$rds
3009
3010echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
3011if [ "$ARCH" = "ia64" ] ; then
3012    PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create ia64 image disk image."
3013else
3014    if [ "$USE_LILO" = "yes" ] ; then
3015        PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create $BOOT_SIZE MB disk image."
3016    else
3017        PrepareBootDiskImage_SYSLINUX $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create $BOOT_SIZE MB disk image."
3018    fi
3019fi
3020
3021[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3022...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3023
3024if [ _"$MONDO_SHARE" = _"" ]; then
3025    ListImagesForUser $MINDI_CACHE
3026    OfferToMakeBootableISO $MINDI_CACHE
3027    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3028        OfferToMakeBootableUSB $MINDI_CACHE
3029    fi
3030    LogIt "Finished."
3031elif [ "$TAPEDEV" ] ; then
3032    rm -f $MINDI_CACHE/{*img,*iso}
3033    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3034        OfferToMakeBootableUSB $MINDI_CACHE
3035    fi
3036    OfferToMakeBootableISO $MINDI_CACHE
3037    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3038        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3039    else
3040        Die "Cannot find all.tar.gz, to be written to tape"
3041    fi
3042elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3043    OfferToMakeBootableUSB $MINDI_CACHE
3044else
3045    OfferToMakeBootableISO $MINDI_CACHE
3046fi
3047# cleanup
3048LogIt "$FRIENDLY_OUTSTRING"
3049for mtpt in $FLOPPY_WAS_MOUNTED ; do
3050    mount $mtpt
3051done
3052MindiExit 0
Note: See TracBrowser for help on using the repository browser.