source: branches/2.2.6/mindi/mindi @ 1928

Last change on this file since 1928 was 1928, checked in by bruno, 11 years ago
  • Property svn:keywords set to Rev Id
File size: 108.9 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 1928 2008-04-18 13:14:36Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17
18ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20#RUN_AFTER_INITIAL_BOOT_PHASE="echo \"Who lives in a pineapple under the sea?\" > /tmp/spongebob.squarepants.txt"
21    # after booting from image/CD but before
22    # accessing auxiliary data disks (or the rest of
23    # the CD), the initscript will run the above command.
24
25RUN_AFTER_BOOT_PHASE_COMPLETE="ide-opt"
26    # after the emergency boot process is complete but
27    # before the init script runs mondorestore, it will
28    # run this command.
29
30MINDI_REV=PBREV
31MINDI_VER=PBVER
32
33MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
34MINDI_PREFIX=XXX
35MINDI_CONF=YYY
36MINDI_SBIN=${MINDI_PREFIX}/sbin
37MINDI_LIB=LLL
38
39# Temporary directory for mindi
40TMPDIR=/tmp
41
42EXTRA_SPACE=49152       # increase if you run out of ramdisk space
43BOOT_SIZE=16384         # size of the boot disk
44MAX_DISKS=99
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59MY_FSTAB=/etc/fstab
60TAPE_MODS="ht st osst ide-tape ide_tape"
61SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs"
62
63# ide-probe-mod
64IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks"
65PCMCIA_MODS="pcmcia_core ds yenta_socket"
66USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
67CDROM_MODS="$TAPE_MODS $IDE_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 $USB_MODS $PCMCIA_MODS"
68NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
69EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
70# Replace with that line for HP OCMP e.g.
71#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
72DENY_MODS="kqemu"
73# Force some modules to be included
74FORCE_MODS=""
75
76LOGFILE=/var/log/mindi.log
77MINDI_CACHE=/var/cache/mindi
78BOOT_MEDIA_MESSAGE="\
79To format and restore all files automatically, type 'nuke' <enter>.\n\
80To restore some/all files interactively, type 'interactive' <enter>.\n\
81To compare the archives with your filesystem, type 'compare' <enter>.\n\
82To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
83You may add one or more of the following parameters as well:-\n\n\
84        donteject - mondorestore will not eject the CD; this is useful if, for\n\
85                    instance, your PC's case has a concealed CD-ROM drive\n\
86        noresize  - your mountlist will not be adjusted to use your unallocated\n\
87                    hard disk space\n\
88        textonly  - do not call any Newt library routines; this is unattractive\n\
89                    but valuable if you find your Newt library has bugs in it\n\n\
90e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
91a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
92"
93FDISK=$MINDI_SBIN/parted2fdisk
94
95# Using a config file allow to overwrite some values
96MINDI_CONFIG="$MINDI_CONF/mindi.conf"
97if [ -f $MINDI_CONFIG ]; then
98    . $MINDI_CONFIG
99fi
100DEPLIST_FILE="$MINDI_CONF/deplist.txt"
101ISO_CMD="/usr/bin/mkisofs"
102ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
103
104# Now we can create what we need
105export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
106
107# ----------------------------------------------------------------------------
108
109
110AbortHere() {
111    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
112    Die "Program is terminating in response to signal received from OS/user"
113}
114
115
116HackSyslinuxFile() {
117    local incoming
118    incoming=`ReadLine`
119    while [ "$incoming" ] ; do
120        echo -en "$incoming" | sed s/24000/$1/
121        if [ "`echo "$incoming" | grep append`" ] ; then
122            echo -en " $ADDITIONAL_BOOT_PARAMS"
123        fi
124        echo -en "\n"
125        incoming=`ReadLine`
126    done
127    if [ -e "$MINDI_LIB/memtest.img" ] ; then
128        echo -en "label memtest\n  kernel memdisk\n  append initrd=memtest.img\n\n"
129    fi
130}
131
132
133Aborted() {
134    trap SIGHUP SIGTERM SIGTRAP SIGINT
135    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
136    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
137    Die "User abort."
138}
139
140
141AddFileToCfgIfExists() {
142    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
143}
144
145
146AddKeyboardMappingFile() {
147    local mappath r included_list included_item i res ii sss
148    mappath=$1
149    KBDEPTH=$(($KBDEPTH+1))
150    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
151    if [ -e "$bigdir/$mappath" ] ; then
152        echo "$mappath already added" >> $LOGFILE
153        return
154    elif [ -d "$bigdir/$mappath" ] ; then
155        echo "Cannot add $mappath: it's a directory. Sorry."
156        return
157    fi
158    echo "Added kbd map $mappath" >> $LOGFILE
159    if [ ! -e "$mappath" ] ; then
160            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
161        if [ ! -e "$mappath" ] ; then
162            LogIt "Cannot add $mappath: kbd map file not found"
163            return
164        fi
165    else
166        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
167    fi
168
169    mkdir -p $bigdir/etc
170    tar cf - $mappath 2>> /dev/null | (cd $bigdir ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir"
171    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
172        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
173    else
174        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
175    fi
176    for included_item in $included_list ; do
177        if [ ! -e "$included_item" ] ; then
178                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
179            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
180            for ii in $sss ; do
181                [ -e "$ii" ] && AddKeyboardMappingFile $ii
182            done
183        else
184            AddKeyboardMappingFile $included_item
185        fi
186    done
187}
188
189
190ChopUpAndCopyFile() {
191    local filename slicesize outdir res biggienumber filesize sliceno noof_slices testfile scratchfile
192    filename=$1
193    outdir=$2
194    slicesize=$3
195    biggienumber=$4
196
197    [ -d "$filename" ] && Die "Cannot chop up $filename: it's a directory. Please amend $DEPLIST_FILE accordingly."
198    mkdir -p $outdir
199
200    sliceno=0
201    scratchfile=$MINDI_TMP/blah.$$.dat
202    cp -f $filename $scratchfile 2>> $LOGFILE || Die "CUACF -- cannot copy $filename to $scratchfile - did you run out of disk space?"
203    [ "`head $scratchfile -n1 | grep -F "bin/sh"`" != "" ] && StripComments $scratchfile "-$filename-"
204    [ "`echo "$filename" | grep -F "etc/termcap"`" != "" ] && StripComments $scratchfile "-$filename-"
205
206    # Uncompress modules only if not using udevd
207    if [ "`echo "$filename" | grep -F "lib/modules/" | grep "\.*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
208        mv $scratchfile $scratchfile.gz
209        gunzip -f $scratchfile || LogIt "Cannot gunzip $scratchfile.gz"
210        filename=`echo "$filename" | tr '.' '#' | sed s/#o#gz/#o/ | sed s/#ko#gz/#ko/ | tr '#' '.'`
211    fi
212    filesize=`du -sk $scratchfile | cut -f1`
213    noof_slices=$(($filesize/$slicesize))
214    echo "$filename" > $outdir/slice-$biggienumber.name
215    echo "$filesize" > $outdir/slice-$biggienumber.size
216    [ -x "$scratchfile" ] && StripExecutable $scratchfile "-$filename-"
217    while [ "$sliceno" -le "$noof_slices" ] ; do
218        dd if=$scratchfile skip=$(($sliceno*$slicesize)) of=$outdir/slice-$biggienumber.`printf "%03d" $sliceno` bs=1k count=$slicesize &> /dev/null
219        sliceno=$(($sliceno+1))
220    done
221    rm -f $scratchfile
222}
223
224
225CopyBootBFile() {
226    local copy_to copy_from possible_locations liloc
227    copy_to=$1
228    copy_from=/boot/boot.b
229    liloc=`which lilo.real 2>/dev/null`
230    [ $liloc ] || liloc=`which lilo 2>/dev/null`
231    if [ $liloc ]; then
232        if ! [ `strings $liloc | grep "boot\.b"` ]; then
233            LogIt "boot.b files built into lilo; I'll create a dummy."
234            > $copy_to
235            return 0
236        fi
237    fi
238    if [ ! -f "$copy_from" ] ; then
239        LogIt "OK, you don't have a /boot/boot.b file, which is odd because\n most _good_ Linux distributions come with one, even if it's only a softlink"
240        copy_from=`grep install= /etc/lilo.conf | grep "\.b" | cut -d'=' -f2`
241        if [ ! -f "$copy_from" ] ; then
242            LogIt "Nor can I find it from your /etc/lilo.conf file. This is very odd."
243            copy_from=`FindSensibleBootBFile`
244            LogIt "I'm going to use '$copy_from'"
245        fi
246    fi
247    cp -f $copy_from $copy_to 2>> $LOGFILE || LogIt "CBBF -- warning -- cannot find your boot.b file. That's it, I quit... (j/k)"
248}
249
250
251CopyDependenciesToDirectory() {
252    local outdir incoming fname filesize counter d found
253    outdir=$1
254    mkdir -p $outdir
255    incoming=`ReadLine`
256    counter=0
257    while [ "$incoming" != "" ] ; do
258        # Non absolute file names should not arrive till here => skipped
259        if [ `echo "$incoming" | cut -c1` != '/' ]; then
260            LogIt "Unable to handle $incoming"
261            incoming=`ReadLine`
262            continue
263        fi
264        # no parent directory of incoming should be a link, copy is not possible in that case
265        d=`dirname "$incoming"`
266        found="false"
267        while [ $d != "/" -a $found = "false" ]; do
268            [ -h "$d" ] && found="true"
269            d=`dirname "$d"`
270        done
271        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
272            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
273        elif [ -e "$incoming" ] && [ $found = "false" ]; then
274            filesize=`du -sk $incoming | cut -f1`
275            if [ "$filesize" -gt "$(($CHOPSIZE*2))" ] && [ ! -h "$incoming" ] ; then
276                ChopUpAndCopyFile $incoming $outdir $CHOPSIZE $BIGNO
277                BIGNO=$(($BIGNO+1))
278            else
279                tar cf - $incoming 2> /dev/null | (cd $outdir ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
280   
281                # Only uncompress modules if not using udevd
282                if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
283                    gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
284                fi
285                [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
286            fi
287            counter=$(($counter+1))
288            if [ "$counter" -ge "5" ] ; then
289                counter=0
290                echo -en "."
291            fi
292        fi
293        incoming=`ReadLine`
294    done
295}
296
297
298CountItemsIn() {
299    local r
300    r=0
301    for q in $1 ; do
302        r=$(($r+1))
303    done
304    echo $r
305}
306
307
308# Last function called before exiting
309# Parameter is exit code value
310MindiExit() {
311    local my_partitions
312
313    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
314    echo "End date : `date`" >> $LOGFILE
315    if [ _"$MONDO_SHARE" != _"" ] ; then
316        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
317        cat $LOGFILE >> /var/log/mondoarchive.log
318        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
319    fi
320
321    cd /
322    sync&
323
324    # Unmount what could remain mounted
325    my_partitions=`mount | grep -F $$ | cut -f1 -d' '`
326    [ "$my_partitions" != "" ] && umount $my_partitions
327    # Clean temporary files only when standalone mindi
328    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
329        rm -Rf $MINDI_TMP
330    fi
331    exit $1
332}
333
334Die() {
335    local i
336    if [ "$1" = "" ] ; then
337        LogIt "FATAL ERROR"
338    else
339        LogIt "FATAL ERROR. $1"
340    fi
341
342    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
343    LogIt "See http://www.mondorescue.org for more information."
344    LogIt "WE CANNOT HELP unless you enclose that file.\n"
345    MindiExit -1
346}
347
348
349DropOptimizedLibraries() {
350    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
351    filelist=$1
352    outdir=$2
353
354    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
355    if [ "$list_of_optimized_libraries" = "" ] ; then
356        return 0
357    fi
358    echo -en "Dropping i686-optimized libraries if appropriate"
359    for optimized_lib_name in $list_of_optimized_libraries ; do
360        echo -en "."
361        reason=""
362        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
363        echo "$vanilla_lib_name" >> $filelist
364        resolved=$vanilla_lib_name
365        echo "Adding $resolved to filelist" >> $LOGFILE
366        resolved=`ReadAllLink $resolved`
367        echo "Adding $resolved to filelist" >> $LOGFILE
368        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
369        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
370        ln -sf $vanilla_lib_name $outdir$optimized_lib_name
371        echo "Excluding $optimized_lib_name" >> $LOGFILE
372        grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
373        echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
374        echo "$vanilla_lib_name" >> $filelist.tmp
375        mv -f $filelist.tmp $filelist
376    done
377    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
378    mv -f $filelist.tmp $filelist
379    echo -e "$DONE"
380}
381
382
383FindAndAddUserKeyboardMappingFile() {
384    local r res mapfile mappath included_item included_list keyfile mp locale
385    LogIt "Analyzing your keyboard's configuration."
386    KEYDIR=/lib/kbd
387    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
388    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
389    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
390    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
391    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
392    if [ ! -e "$KEYDIR" ] ; then
393        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
394        return 0
395    fi
396    if [ -e "/etc/sysconfig/keyboard" ] ; then
397        echo "Red Hat-style config detected." >> $LOGFILE
398        keyfile=/etc/sysconfig/keyboard
399    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
400        echo "Slackware-style config detected." >> $LOGFILE
401        keyfile=/etc/rc.d/rc.keymap
402    elif [ -e "/etc/rc.config" ] ; then
403        echo "Debian-style config detected." >> $LOGFILE
404        keyfile=/etc/rc.config
405    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
406        echo "Debian-style config detected." >> $LOGFILE
407        echo -en "Adding the following keyboard mapping tables: "
408        mkdir -p $bigdir/tmp
409        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
410        KBDEPTH=0
411        mkdir -p $bigdir/etc/console
412        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
413        echo -e "$DONE"
414        return 0
415    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
416        echo "Ubuntu-style config detected." >> $LOGFILE
417        echo -en "Adding the following keyboard mapping tables: "
418        mkdir -p $bigdir/tmp
419        echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
420        KBDEPTH=0
421        mkdir -p $bigdir/etc/console-setup
422        cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
423        echo -e "$DONE"
424        return 0
425    elif [ -e "/etc/conf.d/keymaps" ] ; then
426        echo "Gentoo-style config detected." >> $LOGFILE
427        keyfile=/etc/conf.d/keymaps
428    else
429        echo -en "Searching for rc.config ..."
430        keyfile=`find /etc -name rc.config | head -n1`
431        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
432            LogIt "Unknown config detected. Default keyboard map will be used."
433            return
434        else
435            echo "Found $keyfile" >> $LOGFILE
436        fi
437    fi
438    if [ ! -e "$KEYDIR/keymaps" ] ; then
439        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
440        return
441    fi
442    echo "keyfile=$keyfile" >> $LOGFILE
443    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
444    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
445    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo
446    echo "locale=$locale" >> $LOGFILE
447    #
448    # Process the keymaps dir once for all
449    # AddKeyboardMappingFile will use it recursively
450    #
451    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
452    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
453    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
454    # If we have multiple keymaps then log it !!
455    echo "$mp" | grep -q " "
456    if [ $? -eq 0 ]; then
457        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
458        echo "The following one will be used" >> $LOGFILE
459    fi
460    for i in $mp ; do
461        mappath=$i
462        [ -e "$i" ] && [ ! -d "$i" ] && break
463    done
464    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
465            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
466    fi
467    echo "mappath = $mappath" >> $LOGFILE
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
470        return
471    fi
472    echo -en "Adding the following keyboard mapping tables: "
473    mkdir -p $bigdir/tmp
474    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
475    KBDEPTH=0
476    AddKeyboardMappingFile $mappath
477    echo -e "$DONE"
478    rm -f $MINDI_TMP/keymaps.find
479    return 0
480}
481
482
483FindIsolinuxBinary() {
484    ISOLINUX=/usr/lib/isolinux.bin
485    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
486    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
487    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
488    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
489    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
490    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
491    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
492    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
493}
494
495
496FindLiloBinary() {
497    if which lilo &> /dev/null ; then
498        if which lilo.real > /dev/null 2> /dev/null ; then
499            LILO_EXE=lilo.real
500            LogIt "lilo.real found; will be used instead of lilo (*grumble* *mutter*)"
501        else
502            LILO_EXE=lilo
503        fi
504        $LILO_EXE -V | grep -F "21.6" > /dev/null && Die "Please upgrade LILO. Your version has a serious bug. If you're not _using_ LILO, fine, uninstall it. :)"
505    else
506        LILO_EXE=`which false`
507    fi
508}
509
510
511FindSensibleBootBFile() {
512    local i out last
513    out=""
514    last=""
515    for i in `find /boot -type f | grep -v chain | grep -v os2 | sort -u` ; do
516    if [ "`strings $i 2> /dev/null | head -n1`" = "LILO" ] ; then
517        out="$out $i"
518        last="$i"
519    fi
520    done
521    echo "$last"
522}
523
524
525FindSpecificModuleInPath() {
526    local modpaths pwd line
527    pwd=`pwd`
528    if [ "$YOUR_KERNEL_SUCKS" ] ; then
529        cd $MINDI_TMP
530    else
531        cd /
532    fi
533    if [ ! -e "$1" ] ; then
534        LogIt "WARNING - cannot search specific path '$1'"
535        return 1
536    fi
537    modpaths=`find $1 -name $2.*o -type f`
538    #[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
539    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
540    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
541    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
542    echo "$modpaths"
543    cd $pwd
544}
545
546
547GenerateGiantDependencyList() {
548    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
549
550    echo -en "Analyzing dependency requirements"
551    outfile=$1
552    tempfile=$MINDI_TMP/$$.txt
553    incoming=`ReadLine`
554
555    > $tempfile
556    progress=0
557    res=0
558    noof_lines=$2
559    while [ "$incoming" != "" ] ; do
560        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
561            incoming=`ReadLine`
562            continue
563        fi
564        if [ "$incoming" = "LVMFILES:" ] ; then
565            break
566        fi
567        filelist=`GenerateListForFile "$incoming"`
568        r=$?
569        [ "$r" -ne "0" ] && LogIt "$incoming not found"
570        res=$(($res+$r))
571#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
572        for fname in $filelist ; do
573            [ "$fname" != "" ] && echo "$fname" >> $tempfile
574        done
575        progress=$(($progress+1))
576        echo -en "\r\t\t\t\t\t\t\t\t"
577        i=$(($progress*100))
578        i=$(($i/$noof_lines))
579        echo -en "$i"
580        echo -en "%"
581        modres=$(($progress%4))
582        [ "$modres" -eq "0" ] && echo -en "\t/"
583        [ "$modres" -eq "1" ] && echo -en "\t-"
584        [ "$modres" -eq "2" ] && echo -en "\t\\"
585        [ "$modres" -eq "3" ] && echo -en "\t|"
586        incoming=`ReadLine`
587    done
588    if  [ "$incoming" = "LVMFILES:" ] ; then
589        incoming=`ReadLine`
590        lvmversion=""
591        while [ "$incoming" != "" ] ; do
592            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
593                incoming=`ReadLine`
594                continue
595            fi
596            filelist=`GenerateListForFile "$incoming"`
597            for tool in $filelist ; do
598                lvmresolved=`readlink -f $tool`
599                if [ "$tool" = "$lvmresolved" ]; then
600                    echo "$tool" >> $tempfile
601                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
602                    if [ "$lvmversion" = "" ] ; then
603                        lvmversion=`$lvmresolved`
604                        echo "$lvmresolved" >> $tempfile
605                    fi
606                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
607                    if [ "$lvmversion" = "200" ]; then
608                        # pvdata and lvmcreate_initrd don't exist in LVM2
609                        case "$toolstripped" in
610                        "pvdata")
611                            continue
612                            ;;
613                        "lvmcreate_initrd")
614                            continue
615                            ;;
616                        esac
617                    fi
618                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
619                    if [ -e "$toolpath" ] ; then
620                        echo "$toolpath" >> $tempfile
621                        echo "$tool" >> $tempfile
622                    else
623                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
624                    fi
625                    if [ -e "$toolpath" ] ; then
626                        echo "$toolpath" >> $tempfile
627                        echo "$tool" >> $tempfile
628                    else
629                        echo "Where are your LVM-Tools? Couldn't find $tool"
630                    fi
631                else
632                    echo "$tool" >> $tempfile
633                fi
634            done
635            progress=$(($progress+1))
636            echo -en "\r\t\t\t\t\t\t\t\t"
637            i=$(($progress*100))
638            i=$(($i/$noof_lines))
639            echo -en "$i"
640            echo -en "%"
641            modres=$(($progress%4))
642            [ "$modres" -eq "0" ] && echo -en "\t/"
643            [ "$modres" -eq "1" ] && echo -en "\t-"
644            [ "$modres" -eq "2" ] && echo -en "\t\\"
645            [ "$modres" -eq "3" ] && echo -en "\t|"
646            incoming=`ReadLine`
647        done
648    fi
649    echo -en "$DONE\nMaking complete dependency list"
650
651    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
652    mv -f $tempfile.new $tempfile
653    > $outfile.pre
654    progress=0
655    noof_lines=`cat $tempfile | wc -l`
656    echo "---------------------------------" >> $LOGFILE
657    echo "List of dependencies:             " >> $LOGFILE
658    echo "---------------------------------" >> $LOGFILE
659    for fname in `cat $tempfile` ; do
660        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
661        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
662        progress=$(($progress+1))
663        echo -en "\r\t\t\t\t\t\t\t\t"
664        i=$(($progress*100))
665        i=$(($i/$noof_lines))
666        echo -en "$i"
667        echo -en "%"
668        modres=$(($progress%4))
669        [ "$modres" -eq "0" ] && echo -en "\t/"
670        [ "$modres" -eq "1" ] && echo -en "\t-"
671        [ "$modres" -eq "2" ] && echo -en "\t\\"
672        [ "$modres" -eq "3" ] && echo -en "\t|"
673    done
674    if [ _"$MONDO_SHARE" != _"" ]; then
675        mkdir -p $bigdir/tmp
676        mkdir -p $bigdir/sbin
677        mkdir -p $bigdir/bin
678        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
679            LogIt "\nIncorporating post-nuke tarball"
680            old_pwd=`pwd`
681            cd $bigdir
682            tar -zxf $MINDI_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
683            cd $old_pwd
684        fi
685        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
686            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
687        else
688            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
689            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
690            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
691            Die "Odd."
692        fi
693        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
694        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
695            LogIt "Incorporating NFS-related settings"
696            for r in NFS-* ISO-PREFIX ; do
697                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
698                echo "Copying $r to ramdisk" >> $LOGFILE
699            done
700        fi
701    fi
702    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
703    rm -f $tempfile $outfile.pre
704    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
705    return $res
706}
707
708
709GenerateListForFile() {
710    local files_found loc fname incoming i res
711    incoming="$1"
712    files_found=""
713    res=0
714
715    for fname in $incoming ; do
716        files_found="$files_found `LocateFile $fname`"
717    done
718
719    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
720}
721
722
723# Returns all disk devices which are part of a raid array
724GetAllRaidMembers() {
725    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
726}
727
728
729GetFileSizeList() {
730    local i
731    for i in `find $1 -type d -o -print` ; do
732        du -sk $i
733    done
734}
735
736
737GetHomeDir() {
738    local res loc
739    loc=`which $1 2>/dev/null`
740    res=`file $loc | $AWK '{print $NF;}'`
741    dirname $res
742}
743
744
745# Check kernel filesystem capabilites for accessing initrd image
746#
747# Interface definition:
748# param #1: absolute path to kernel image
749GetInitrdFilesystemToUse() {
750
751    # interface test: make sure we have one parameter
752    if [ $# -ne 1 ]; then
753        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
754    fi
755
756    # interface parameters
757    local lvKernelImage=$1
758
759    # local constants (filesystem magic strings)
760    local lcMagicCramfs="<3>cramfs: wrong magic"
761    local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
762    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs..."
763
764    # local variables
765    local lvOffset
766    local lvScanRes
767    local lvUseFilesystem
768
769    # say where we are.
770    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
771
772    # verify that file exists
773    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
774
775    # Kernel may be gzip compressed
776    file $lvKernelImage 2>&1 | grep -q gzip
777    if [ $? -eq 0 ]; then
778        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
779    else
780        # get offet of gzip magic "1f8b0800" in file
781        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}'`
782        [ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
783        lvOffset=`expr $lvOffset / 2`
784        echo "  GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
785
786        # scan kernel image for initrd filessystem support
787        lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
788    fi
789
790    # determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
791    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
792        lvUseFilesystem="ext2fs"
793    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
794        lvUseFilesystem="initramfs"
795    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
796        lvUseFilesystem="cramfs"
797    else
798        lvUseFilesystem="UNSUPPORTED"
799    fi
800
801    # say what we are using
802    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
803
804    # return file system to use
805    echo "$lvUseFilesystem"
806
807}
808
809# Searches parent raid device of given disk device
810# $1: disk device (i.e. /dev/hda1)
811GetParentRaidDev() {
812    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
813}
814
815
816# Searches members of raid device
817# $1: raid device (/dev/md...)
818GetRaidDevMembers() {
819    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
820}
821
822
823HackPathsToFailsafe() {
824    local incoming newpath kver stub i pwd
825    kver=`uname -r`
826    incoming=`ReadLine`
827    pwd=`pwd`
828    cd $MINDI_TMP
829    while [ "$incoming" != "" ] ; do
830        stub=`basename $incoming`
831        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
832        for i in $newpath ; do
833            echo "$i"
834        done
835        read incoming
836    done
837    cd $pwd
838}
839
840
841ListAllPartitions() {
842    local res currline partition all_partitions ap_orig remaining i j
843
844    grep -vx " *#.*" $MY_FSTAB | grep -vx " *none.*" | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/fdd|cdr|zip|floppy/ {print $1}'
845    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
846    if [ -e "/vmfs/volumes" ]; then
847        # For VMWare ESX 3 get the device names of these volumes
848        vdf -P | grep -E '/vmfs/volumes' | awk '{print $1}'
849    fi
850    return
851}
852
853
854ListImagesForUser() {
855    local path fname
856    path=$1
857    echo -en "In the directory '$path' you will find the images:-\n"
858    for fname in `ls $path | grep -F mindi-` ; do
859        printf "%19s " $fname
860    done
861    echo " "
862}
863
864
865ListKernelModulePaths() {
866    local module_list module fname oss r kern
867    oss="/root/oss/modules"
868    module_list="$MODULES"
869    # Remove unwanted modules from list
870    for i in $DENY_MODS; do
871        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
872        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
873    done
874###
875### Sq-Modification ... Use kernelname for module search path if specified
876###
877    # kern="`uname -r`"
878    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
879    then
880        kern=${kernelname}
881    else
882        kern="`uname -r`"
883    fi
884###
885### Sq-Mod End
886###
887    for module in $module_list $EXTRA_MODS ; do
888        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
889        echo "module $module --> $r" >> $LOGFILE
890        [ "$r" ] && echo "$r"
891        [ -f "$oss" ] && find $oss | grep -F $module
892    done
893    find /lib/modules/$kern/modules.* -type f 2> /dev/null
894    [ -f "$oss" ] && find $oss.* 2> /dev/null
895}
896
897#
898# Critical function which computes all dependencies (dyn. lib.)
899# for a list of binaries
900#
901LocateDeps() {
902    local incoming fname deps
903    incoming="$*"
904    for fname in $incoming ; do
905        if [ ! -e "$fname" ] ; then
906            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
907            if echo $fname | grep lvm &> /dev/null ; then
908                echo "This warning only affects you if you are using LVM." >> $LOGFILE
909                if echo "$MODULES" | grep lvm &> /dev/null ; then
910                    echo "I think you are, so please take heed!" >> $LOGFILE
911                else
912                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
913                fi
914            fi
915        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
916            echo "$fname is softlink" >> $LOGFILE
917        else
918            ldd $fname 2> /dev/null | ProcessLDD
919        fi
920    done
921}
922
923
924# Give all symlinks recursively of a full path name
925ReadAllLink() {
926    file="$1"
927
928    echo "$file"
929    if [ ! -h $file ]; then
930        return 0
931    fi
932
933    link=`readlink $file`
934    d=`dirname $file`
935    fchar=`echo $link | cut -c1`
936    # If mother dir is a link print it
937    if [ -h "$d" ]; then
938        echo "$d"
939        d=`readlink $d`
940    fi
941    if [ "$fchar" != "/" ]; then
942        # Relative or local link
943        ReadAllLink "$d/$link" 
944    else
945        # Absolute path
946        ReadAllLink $link 
947    fi
948}
949
950
951LocateFile() {
952    local i path fname_to_find location output resolved tmp stub cache_id loclist
953    fname_to_find="$1"
954    # It's an absolute path
955    if echo "$fname_to_find" | grep -x "/.*" ; then
956        output="$fname_to_find"
957        if [ -h "$output" ] ; then
958            output="`ReadAllLink $output` $output"
959        fi
960        echo "$output"
961        return 0
962    fi
963    # It's not an absolute path
964    output=""
965    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
966    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
967        [ -h "$path" ] && continue
968        [ ! -e "$path/$fname_to_find" ] && continue
969        output="$path/$fname_to_find $output"
970        if [ -h "$path/$fname_to_find" ] ; then
971            output="`ReadAllLink $path/$fname_to_find` $output"
972        fi
973    done
974    if [ "$output" = "" ] ; then
975        return 1
976    fi
977    echo "$output"
978    return 0
979}
980
981
982LogIt() {
983    if [ -e /dev/stderr ] ; then
984        echo -e "$1" >> /dev/stderr
985    elif [ -e /usr/bin/logger ] ; then
986        /usr/bin/logger -s $1
987    fi
988    echo -e "$1" >> $LOGFILE
989}
990
991
992# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
993MakeMondoConfigFile() {
994    local outfile use_lzo use_comp use_star
995    outfile=$1
996    > $outfile
997    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
998    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
999    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
1000    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1001    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1002    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1003    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1004    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1005    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1006    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1007    echo "use-lzo $use_lzo" >> $outfile
1008    echo "use-gzip $use_gzip" >> $outfile
1009    echo "use-star $use_star" >> $outfile
1010    echo "use-comp $use_comp" >> $outfile
1011    echo "datestamp `date`" >> $outfile
1012    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/NFS-DEV           nfs-dev           $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1033}
1034
1035
1036MakeMountlist() {
1037    local scratchdir mountlist all_partitions current_partition \
1038partition_size partition_format outstring partition_number \
1039partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1040absolute_partition old_partition_fmt current_lvolume
1041
1042    echo "Your raw fstab file looks like this:" >> $LOGFILE
1043    echo "------------------------------------" >> $LOGFILE
1044    cat $MY_FSTAB >> $LOGFILE
1045    echo "Your mountlist will look like this:" | tee -a $LOGFILE
1046    echo "-----------------------------------" >> $LOGFILE
1047
1048# scratchdir, mountlist(OUT)
1049    scratchdir=$MINDI_TMP
1050    mountlist=$1
1051
1052# NB: partition = device
1053# NB: mountpt = where the device is mounted
1054
1055    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1056
1057    [ "$mountlist" != "" ] && rm -Rf $mountlist
1058    > $mountlist
1059    all_partitions=""
1060   
1061    if [ $LVM != "false" ]; then
1062        echo -en "Analyzing LVM...\n"
1063        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1064        if [ $? -ne 0 ]; then
1065            LVM="false"
1066        fi
1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-32`
1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070#    echo "all partitions = $all_partitions" > /dev/stderr
1071    for i in $IMAGE_DEVS ; do
1072        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1073    done
1074    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1075    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
1077    for c_p in $all_partitions ; do
1078        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] && continue
1079        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1080        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1081            current_partition=`readlink -f $c_p`
1082            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
1083            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1084        else
1085            current_partition="$c_p"
1086        fi
1087        [ "$c_p" = "none" ] && continue
1088        redhat_label=""
1089        label=""
1090        uuid=""
1091        absolute_partition=`readlink -f $c_p`
1092        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1093
1094        # Detects noauto partitions not mounted and exclude them
1095        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1096        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1097            continue
1098        fi
1099
1100        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1101        # current_partition contains only first column of /etc/fstab
1102        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
1103            str_to_find_fmt_with=$current_partition
1104            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1105            actual_dev=""
1106
1107            # 1st try, findfs - the RHEL way of finding labels and their partitions
1108            if [ -x "/sbin/findfs" ]; then
1109                actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
1110            fi
1111   
1112            # 2nd try : blkid, the good way for all LABEL except swap
1113            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1114                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1115                # For LVM FS it will give a /dev/dm-# which should then be converted
1116                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1117                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1118                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1119                    for dev in `ls /dev/mapper/*`; do
1120                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1121                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1122                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1123                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1124                            break
1125                        fi
1126                    done
1127                fi
1128            fi
1129   
1130            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1131            # For LVM gives a /dev/mapper entry
1132            if [ "x$actual_dev" = "x" ]; then
1133                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1134            fi
1135   
1136            # 4th try, with vol_id
1137            # SWAP only
1138            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1139                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1140                for dev_swap in $list_swaps ; do
1141                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1142                    if [ "x$dev_exists" != "x" ]; then
1143                        actual_dev=$dev_swap
1144                        break;
1145                    fi
1146                done
1147            fi
1148
1149            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1150            # LABEL=SW-cciss/c0d0p3 (RDP)
1151            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1152            # SWAP only
1153            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1154                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1155                    do
1156                        # Location of the swap label for kernel 2.6
1157                        try_dev_label=`dd bs=1 count=16 skip=1052 if=$try_dev 2> /dev/null`
1158                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1159                            actual_dev=$try_dev
1160                        fi
1161                    done
1162            fi
1163
1164            # Check if one of all those tries has known success
1165            if [ "x$actual_dev" != "x" ]; then
1166                current_partition=$actual_dev
1167            else
1168                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1169            fi
1170        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1171        # current_partition contains only first column of /etc/fstab
1172        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1173            str_to_find_fmt_with=$current_partition
1174            uuid=`echo "$current_partition" | cut -d'=' -f2`
1175            actual_dev=""
1176
1177            # 1st try, findfs - the RHEL way of finding labels and their partitions
1178            if [ -x "/sbin/findfs" ]; then
1179                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1180            fi
1181   
1182            # 2nd try : blkid, the good way for all UUID except swap
1183            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1184                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1185                # For LVM FS it will give a /dev/dm-# which should then be converted
1186                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1187                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1188                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1189                    for dev in `ls /dev/mapper/*`; do
1190                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1191                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1192                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1193                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1194                            break
1195                        fi
1196                    done
1197                fi
1198            fi
1199   
1200            # 3th try, with vol_id
1201            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1202                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1203                for dev in $list_dev ; do
1204                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1205                    if [ "x$dev_exists" != "x" ]; then
1206                        actual_dev=$dev
1207                        break;
1208                    fi
1209                done
1210            fi
1211
1212            # 4th try, with dumpuuid (VMWare only ?) for swap
1213            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1214                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1215                for dev in $list_dev ; do
1216                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1217                    if [ "x$dev_exists" != "x" ]; then
1218                        actual_dev=$dev
1219                        break;
1220                    fi
1221                done
1222            fi
1223
1224            # Check if one of all those tries has known success
1225            if [ "x$actual_dev" != "x" ]; then
1226                current_partition=$actual_dev
1227            else
1228                Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1229            fi
1230        else
1231            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1232            # they use symlinks in fstab unrelated to what is shown in mount !
1233            if [ _"$partition_mountpt" = _"" ]; then
1234                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1235                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1236                            str_to_find_fmt_with=$tmpp
1237                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1238                            break;
1239                        fi
1240                done
1241            else
1242                str_to_find_fmt_with=$current_partition
1243            fi
1244        fi
1245
1246        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1247        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1248        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1249        # the former is then a link to the latter, so we test whether
1250        # $current_partition is actually such a link or not and set
1251        # $current_lvolume accordingly. On Debian you may find more than one answer
1252        # so we remove the one corresponding to /dev/.static
1253        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1254        # principle is the same and we need to find the link to it as well.
1255        # Note that $current_lvolume may well be an
1256        # ordinary device. It is just to make sure that we feed the right value
1257        # into any of the LVM tools if possible.
1258
1259        current_lvolume="$current_partition"
1260        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1261            # .static dir are a Debian specificity
1262            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1263            echo $current_lvolume | grep -q ' '
1264            if [ $? -eq 0 ]; then
1265                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1266            fi
1267        fi
1268        #
1269        # End of LVM device style variation code (other than $current_lvolume).
1270
1271        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1272            # Size computed via LVM not directly
1273            partition_size="lvm"
1274        else
1275            partition_size=`SizeOfPartition $current_partition`
1276            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1277            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1278            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1279                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition" | $AWK '{print $3}'`
1280                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1281                [ "$partition_format" != "swap" ] && partition_format="swap"
1282                if [ "$partition_size" = "" ] ; then
1283                    totalsize=0
1284                    items=0
1285                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1286                        totalsize=$(($totalsize+$i))
1287                        items=$(($items+1))
1288                    done
1289                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1290                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1291                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1292                fi
1293            fi
1294        fi
1295        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1296        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1297        if [ "$partition_mountpt" = "" ] ; then
1298            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1299                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1300                    partition_mountpt="raid"
1301                    partition_format="raid"
1302                else
1303                    partition_mountpt="lvm"
1304                    partition_format="lvm"
1305                fi
1306            fi
1307        fi
1308        psz=$partition_size
1309        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1310        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1311        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1312            partition_mountpt="image"
1313            old_partition_fmt=$partition_format
1314            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1315            partition_size=$(($partition_size+1)); # just in case
1316            if [ "$partition_format" = "Linux" ] ; then
1317                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1318                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1319                partition_format=$old_partition_fmt
1320            fi
1321        fi
1322        if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | grep -F " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
1323            echo "Excluding $current_partition from mountlist" >> $LOGFILE
1324            continue
1325        fi
1326        if [ ! "$partition_mountpt" ] ; then
1327            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1328            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1329                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1330                [ "$partition_format" ] && break
1331            done
1332            echo "------- $FDISK log end ------------" >> $LOGFILE
1333            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1334                partition_format="compaq"
1335            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1336                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1337                continue
1338            fi
1339        fi
1340        if [ "$redhat_label" ]; then
1341            label="$redhat_label"
1342        elif [ "$uuid" ]; then
1343            label="$uuid"
1344        fi
1345        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1346        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1347        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1348        if [ "$current_partition" = "" ] ; then
1349            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1350        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1351            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1352                partition_mountpt=raid
1353                partition_format=raid
1354                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1355                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1356            else
1357                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1358            fi
1359        elif [ "$partition_format" = "" ] ; then
1360            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1361        elif [ "$partition_size" = "" ] ; then
1362            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1363        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1364            continue
1365        else
1366            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1367                echo "Stupid bastard..." >> $LOGFILE
1368                partition_format="vfat"
1369            fi
1370            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1371            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1372        fi
1373    done
1374}
1375
1376
1377MakeSureNumberIsInteger() {
1378    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1379    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1380    echo "result = '$res'"
1381        Die "$1 should be an integer"
1382    fi
1383}
1384
1385
1386MakeSyslinuxMessageFile() {
1387    mkdir -p $1
1388    rmdir $1
1389    echo -en "  " > $1
1390    if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1391        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ >> $1.tmp
1392    else
1393        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' '\\r' 'on' 'an' '\/' '`uname -r`' 'on' 'an' '`uname -m`/ >> $1.tmp
1394    fi
1395    sed s/%r/"`uname -r`"/ $1.tmp | sed s/%t/"`hostname`"/ > $1
1396    rm -f $1.tmp
1397    if [ "$CDRECOVERY" != "yes" ] ; then
1398        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1399            echo -en "Press <enter> to continue.\n" >> $1
1400        elif [ ! "$MINDI_TMP" ] ; then
1401            echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" >> $1
1402            if [ -e "$MINDI_LIB/memtest.img" ] ; then
1403                echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n" >> $1
1404            fi
1405        else
1406            echo -en "$BOOT_MEDIA_MESSAGE" >> $1
1407        fi
1408    else
1409        echo -en " \
1410To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1411CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" >> $1
1412    fi
1413}
1414
1415
1416OfferToMakeBootableISO() {
1417    local i old_pwd
1418    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1419        echo -en "Shall I make a bootable CD image? (y/[n]) "
1420        read i
1421        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1422    fi
1423    if [ _"$MINDI_TMP" = _"" ]; then
1424        Die "MINDI_TMP undefined"
1425    fi
1426    rm -Rf $MINDI_TMP/iso
1427    mkdir -p $MINDI_TMP/iso/{images,archives,isolinux}
1428    cp -f $1/*.img $1/*.gz $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $i to $MINDI_TMP/iso/images"
1429    old_pwd=`pwd`
1430    cd $MINDI_TMP/iso
1431    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1432    for i in memdisk memtest.bin memtest.img ; do
1433        j=$MINDI_LIB/$i
1434        k=$MINDI_TMP/iso/isolinux
1435        if [ -e "$j" ] ; then
1436            LogIt "Copying $j to $k"
1437            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1438            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1439            if [ _"$MONDO_SHARE" != _"" ]; then 
1440                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1441            fi
1442        fi
1443    done
1444    MakeSyslinuxMessageFile $MINDI_TMP/iso/isolinux/message.txt
1445    cp $kernelpath $MINDI_TMP/iso/isolinux/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/isolinux/vmlinuz). Did you run out of disk space?"
1446    cp $MINDI_TMP/mindi.rdz $MINDI_TMP/iso/isolinux/initrd.img 2>> $LOGFILE
1447    if [ _"$MONDO_SHARE" != _"" ]; then 
1448        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"/dev/null
1449        cp $MINDI_TMP/mindi.rdz $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy mindi.rdz ($MINDI_TMP/mindi.rdz) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1450
1451    fi
1452    [ -e "$iso_cfg_file" ] || Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1453    cd $MINDI_TMP/iso/isolinux
1454    cat $iso_cfg_file | HackSyslinuxFile $ramdisk_size $MINDI_TMP/iso > isolinux.cfg || Die "Cannot copy isolinux.cfg to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
1455    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1456        perl -pi -e 's/interactive/iso/' isolinux.cfg
1457    fi
1458    if [ "$ARCH" != "ia64" ] ; then
1459        cp $ISOLINUX isolinux.bin 2> /dev/null || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
1460        cp $ISOLINUX ../ 2>> $LOGFILE
1461    fi
1462    cd $MINDI_TMP/iso
1463    if [ "$ARCH" != "ia64" ] ; then
1464        if [ _"$MONDO_SHARE" != _"" ]; then 
1465            cp -f $MINDI_TMP/iso/isolinux/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1466            cp -f $MONDO_SHARE/autorun . 2>> $LOGFILE
1467        fi
1468        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1469    else
1470        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c isolinux/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1471    fi
1472    if [ "$?" -ne "0" ] ; then
1473        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1474        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1475        echo "$ISO_CMD returned the following errors:-"
1476        cat $MINDI_TMP/mkisofs.log
1477        LogIt "Failed to create ISO image."
1478    else
1479        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1480    fi
1481    rm -f $MINDI_TMP/mkisofs.log
1482    cd $old_pwd
1483}
1484
1485
1486OfferToMakeBootableUSB() {
1487    local i old_pwd
1488    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1489        echo -n "Shall I make a bootable USB image ? (y/[n]) "
1490        read i
1491        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1492        if [ "$USBDEVICE" = "" ]; then
1493            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1494            read dev
1495            USBDEVICE=$dev
1496        fi
1497        echo "WARNING: This will erase all content on $USBDEVICE"
1498        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1499    fi
1500    if [ _"$MINDI_TMP" = _"" ]; then
1501        Die "MINDI_TMP undefined"
1502    fi
1503    rm -Rf $MINDI_TMP/usb
1504    mkdir -p $MINDI_TMP/usb
1505    USBPART="${USBDEVICE}1"
1506
1507    echo -en "Transforming $USBDEVICE in a Bootable device " 
1508    echo -en "."
1509    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1510    echo "Checking $USBDEVICE" >> $LOGFILE
1511    $FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1512    if [ $? -ne 0 ]; then
1513        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1514        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1515        exit -1
1516    fi
1517    echo -en "."
1518    echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1519    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1520    echo "Erasing $USBDEVICE" >> $LOGFILE
1521    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1522d
1523d
1524d
1525d
1526n
1527p
15281
1529
1530
1531t
1532b
1533a
15341
1535w
1536EOF
1537    if [ $? -ne 0 ]; then
1538        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1539        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1540        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1541        MindiExit -1
1542    fi
1543    echo -en "."
1544    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1545    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1546    if [ $? -ne 0 ]; then
1547        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1548        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1549        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1550        MindiExit -1
1551    fi
1552    echo -en "."
1553    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1554    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1555    if [ $? -ne 0 ]; then
1556        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1557        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1558        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1559        MindiExit -1
1560    fi
1561    echo -en "."
1562    mkdir -p $MINDI_TMP/usb/images
1563    cp -f $1/*.img $1/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1564    echo -en "."
1565    old_pwd=`pwd`
1566    cd $MINDI_TMP/usb
1567    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1568    for i in memdisk memtest.bin memtest.img ; do
1569        j=$MINDI_LIB/$i
1570        k=$MINDI_TMP/usb
1571        if [ -e "$j" ] ; then
1572            LogIt "Copying $j to $k"
1573            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1574            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1575        fi
1576    done
1577    echo -en "."
1578    MakeSyslinuxMessageFile $MINDI_TMP/usb/message.txt
1579    echo -en "."
1580    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/syslinux/vmlinuz). Did you run out of disk space?"
1581    echo -en "."
1582    cp $MINDI_TMP/mindi.rdz $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1583    echo -en "."
1584    [ -e "$iso_cfg_file" ] || Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1585    cat $sys_cfg_file | HackSyslinuxFile $ramdisk_size $MINDI_TMP/usb > syslinux.cfg || Die "Cannot copy syslinux.cfg from mindi_home to $MINDI_TMP/usb - did you run out of disk space?"
1586    echo -en "."
1587    if [ "$NFS_DEV" != "" ] ; then
1588        perl -pi -e 's/interactive/iso/' syslinux.cfg
1589    fi
1590    cd $old_pwd
1591    echo -en "."
1592    umount $MINDI_TMP/usb
1593    if [ "$ARCH" != "ia64" ] ; then
1594        syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1595        if [ "$?" -ne "0" ] ; then
1596            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1597            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1598            LogIt "Failed to create USB image."
1599        else
1600            echo -e "$DONE"
1601            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1602        fi
1603        rm -f $MINDI_TMP/syslinux.log
1604    else
1605        echo "No USB boot support for ia64" | tee -a $LOGFILE
1606        MindiExit -1
1607    fi
1608    echo -en "."
1609}
1610
1611
1612MakeMessageFile() {
1613    if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1614        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/
1615    else
1616        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" /etc/issue.net | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/
1617    fi
1618    if [ _"$MONDO_SHARE" != _"" ]; then
1619        if [ "$CDRECOVERY" != "yes" ] ; then
1620            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1621                echo -en "Press <enter> to continue.\n"
1622            elif [ ! "$MINDI_TMP" ] ; then
1623                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1624            else
1625                echo -en "$BOOT_MEDIA_MESSAGE"
1626            fi
1627        fi
1628    fi
1629    if [ "$CDRECOVERY" = "yes" ] ; then
1630        echo -en "\
1631To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1632CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1633    fi
1634    echo -en "\n\n\n"
1635}
1636
1637
1638MakeLiloConfFile() {
1639    local options i ooo
1640    options=""
1641
1642    if [ "$ARCH" != "ia64" ] ; then
1643        echo -en "boot=/dev/loop0\ndisk=/dev/loop0\n"
1644        echo -en "install=/boot.b\nmap=/boot.map\n"
1645    fi
1646    if [ "$CDRECOVERY" = "yes" ] ; then
1647        echo -en "default=RESTORE\n"
1648    elif [ _"$MONDO_SHARE" != _"" ]; then
1649        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1650            echo -en "default=iso\n"
1651        else
1652            echo -en "default=interactive\n"
1653        fi
1654    else
1655        echo -en "default=expert\n"
1656    fi
1657
1658    echo -en "prompt\n"
1659    if [ "$ARCH" != "ia64" ] ; then
1660        echo -en "vga=normal\nbackup=/dev/null\nmessage=/message\n"
1661    fi
1662    if [ "$CDRECOVERY" != "yes" ] ; then
1663        echo -en "timeout=300\n"
1664    fi
1665    echo -en "\n"
1666    if [ "$CDRECOVERY" = "yes" ] ; then
1667        options="RESTORE expert"
1668    else
1669        if [ _"$MONDO_SHARE" != _"" ]; then
1670            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1671                options="iso"
1672            else
1673                options="interactive expert compare iso nuke isonuke"
1674# hda hdb hdc hdd"
1675            fi
1676        else
1677            options="expert"
1678        fi
1679    fi
1680    for i in $options ; do
1681        ooo=$i
1682        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1683        if [ "$ARCH" = "ia64" ] ; then
1684            rootpart="root=/dev/ram0\n\t"
1685        else
1686            rootpart=""
1687        fi
1688        outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/mindi.rdz\n\t${rootpart}append=\" rw ramdisk=$ramdisksize ramdisk_size=$ramdisksize maxcpus=1 $ooo_mode $ADDITIONAL_BOOT_PARAMS"
1689   
1690        outstr=$outstr" $ooo_mode"
1691        outstr=$outstr"\"\n"
1692        echo -en "$outstr"
1693    done
1694}
1695
1696
1697PrepareBootDiskImage_LILO() {
1698    local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1699    imagesdir=$1
1700    kernelpath=$2
1701    ramdisksize=$3
1702
1703    retval=0
1704    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1705    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1706    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
1707    echo -en "..."
1708    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1709    mountpoint=$MINDI_TMP/mountpoint.$$
1710    mkdir -p $mountpoint
1711    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1712    if [ "$ARCH" = "ia64" ] ; then
1713        mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1714        t=vfat
1715    else
1716        echo "Creating ext2 filesystem on $imagefile" >> $LOGFILE
1717        mke2fs -N 26 -m 0 -F $imagefile &> /dev/null || Die "Unable to create an ext2 file system on $imagefile"
1718        t=ext2
1719    fi
1720    mount -t $t -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1721    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1722    mkdir -p $mountpoint/etc
1723    if [ "$ARCH" != "ia64" ] ; then
1724        liloconf=$mountpoint/etc/lilo.conf
1725    else
1726        liloconf=$mountpoint/elilo.conf
1727    fi
1728    old_pwd=`pwd`
1729    cd $mountpoint
1730    if [ "$ARCH" != "ia64" ] ; then
1731        tar -zxf $MINDI_LIB/dev.tgz || LogIt "Cannot untar dev.tgz"
1732    fi
1733    cd $old_pwd
1734    # BERLIOS : Useless and generating errors on CentOS ? (losetup miss a param)
1735    #losetup /dev/loop0 > /dev/null 2> /dev/null
1736    #[ "$?" -eq "0" ] || losetup /dev/loop0 -d || Die "Please free up /dev/loop0 by typing   'losetup /dev/loop0 -d'.\nReboot if necessary."
1737    CopyBootBFile $mountpoint/boot.b
1738
1739    MakeLiloConfFile > $liloconf
1740
1741    # Copy it so that CD-ROM menu entry is satisfied
1742    if [ "$ARCH" = "ia64" ] ; then
1743        mountefi=0
1744        df -T | grep /boot/efi | grep -q vfat
1745        if [ $? -ne 0 ]; then
1746            mount /boot/efi
1747            if [ $? -ne 0 ]; then
1748                echo "You have to mount your EFI partition when using mindi"
1749                MindiExit -1
1750            fi
1751            mountefi=1
1752        fi
1753        el=`find /boot/efi -name elilo.efi`
1754        cp $el $mountpoint
1755        cp $liloconf $mountpoint
1756        if [ $mountefi -eq 1 ]; then
1757            umount /boot/efi 2>&1 > /dev/null
1758        fi
1759    fi
1760
1761    echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint..." >> $LOGFILE
1762    cp -f $MINDI_TMP/mindi.rdz $mountpoint 2>> $LOGFILE
1763    if [ "$?" -ne "0" ] ; then
1764        LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
1765        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1766        LogIt "Please unload some of your modules and try again."
1767        rm -f $MINDI_TMP/mtpt.$$
1768        LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
1769        retval=$(($retval+1))
1770    fi
1771    MakeMessageFile > $mountpoint/message
1772
1773    mkdir -p $mountpoint/tmp
1774    cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
1775    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1776        echo -en "image=/memtest.bin\nlabel=memtest\nn" >> $liloconf
1777        echo -en "image=/memdisk\nlabel=memtest\nappend=\"initrd=memtest.img\"\n" >> $liloconf
1778#        echo "Yep, this is a multi-function CD" > $mountpoint/MULTIFUNC
1779    fi
1780
1781    # copy the kernel across
1782    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1783    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1784    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1785    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1786    if [ "$?" -ne "0" ] ; then
1787        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1788        du -sk $mountpoint/* >> $LOGFILE
1789        echo "--- end of list of files ---" >> $LOGFILE
1790        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1791Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1792        rm -f $mountpoint/vmlinuz
1793        cd $old_pwd
1794        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1795        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1796    #   losetup /dev/loop0 -d
1797        rm -f $imagefile
1798        return 0
1799    fi
1800    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1801    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1802    echo "Free space left on image = $free_space KB" >> $LOGFILE
1803    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1804    # make it bootable
1805    rm -f $mountpoint/zero
1806    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1807    if [ ! "$KERN_DISK_MADE" ] ; then
1808        if [ "$ARCH" != "ia64" ] ; then
1809            $LILO_EXE $LILO_OPTIONS -r $mountpoint >> $LOGFILE 2>> $LOGFILE
1810        else
1811            /bin/true
1812        fi
1813    else
1814        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1815    fi
1816
1817    # BERLIOS  does not test necessarily what it expects
1818    if [ $? -ne "0" ] ; then
1819        if [ "`grep -F "/tmp/dev.0" $LOGFILE`" ] ; then
1820            LogIt "The '/tmp/dev.0' error is NOT Mindi's fault. It is LILO's."
1821            LogIt "Please reboot your PC as a workaround."
1822            Die "LILO sneezed and Mindi caught a cold. Please read the README / FAQ."
1823        fi
1824        echo "$LILO_EXE -r $mountpoint ...failed."
1825        echo -en "Press ENTER to continue."; read line
1826        LogIt "Cannot run lilo on $mountpoint\nPlease upgrade/downgrade your version of LILO. It has a bug."
1827        retval=$(($retval+1))
1828    fi
1829    cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
1830    if [ "$ARCH" = "ia64" ] ; then
1831        cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1832    fi
1833    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1834    echo -en "..."
1835    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1836    if [ "$retval" -eq "0" ] ; then
1837        echo -en "...$DONE\n"
1838        if [ "$KERN_DISK_MADE" ] ; then
1839            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1840        fi
1841    else
1842        echo -en "...failed\n"
1843        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1844        rm -f $imagefile
1845    fi
1846    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1847    return $retval
1848}
1849
1850
1851PrepareBootDiskImage_SYSLINUX() {
1852    local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1853    imagesdir=$1
1854    kernelpath=$2
1855    ramdisksize=$3
1856    do_boot_root_thingy=""
1857    local retval old_pwd
1858    retval=0
1859
1860    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1861    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1862    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
1863    echo -en "..."
1864    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1865    mountpoint=$MINDI_TMP/mountpoint.$$
1866    mkdir -p $mountpoint
1867    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1868    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1869    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1870    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1871
1872    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1873
1874    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1875    old_pwd=`pwd`
1876    MakeSyslinuxMessageFile $mountpoint/message.txt
1877    cd $mountpoint
1878    [ -e "$sys_cfg_file" ] || Die "Obi Wan, word up?"
1879    cat $sys_cfg_file | HackSyslinuxFile $ramdisk_size $mountpoint > syslinux.cfg || Die "Cannot copy syslinux.cfg from mindi_home to tmp_root"
1880    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1881        perl -pi -e 's/interactive/iso/' syslinux.cfg
1882    fi
1883    cd $old_pwd
1884    echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint/initrd.img..." >> $LOGFILE
1885    cp -f $MINDI_TMP/mindi.rdz $mountpoint/initrd.img 2>> $LOGFILE
1886    if [ "$?" -ne "0" ] ; then
1887        LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
1888        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1889        LogIt "Please unload some of your modules and try again."
1890        rm -f $MINDI_TMP/mtpt.$$
1891        LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
1892        retval=$(($retval+1))
1893    fi
1894
1895    mkdir -p $mountpoint/tmp
1896    cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
1897
1898    # copy the kernel across
1899    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1900    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1901    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1902    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1903    if [ "$?" -ne "0" ] ; then
1904        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1905        du -sk $mountpoint/* >> $LOGFILE
1906        echo "--- end of list of files ---" >> $LOGFILE
1907        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1908Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1909        rm -f $mountpoint/vmlinuz
1910        cd $old_pwd
1911        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1912        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1913
1914        rm -f $imagefile
1915        return 0
1916    fi
1917    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1918    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1919    echo "Free space left on image = $free_space KB" >> $LOGFILE
1920    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1921
1922    # make it bootable
1923    rm -f $mountpoint/zero
1924    mkdir -p $mountpoint/etc
1925    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1926    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1927    echo -en "..."
1928    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1929
1930    if [ "$retval" -eq "0" ] ; then
1931        echo -en "...$DONE\n"
1932        if [ "$KERN_DISK_MADE" ] ; then
1933            rm -f $imagefile
1934            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1935        fi
1936    else
1937        echo -en "...failed\n"
1938        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1939        rm -f $imagefile
1940    fi
1941    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1942    return $retval
1943}
1944
1945
1946PrepareDataDiskImages() {
1947    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles
1948
1949    imagesdir=$1
1950    rm -f $imagesdir/mindi.iso
1951    needlist=$MINDI_TMP/what-we-need.txt
1952    bigdir=$MINDI_TMP/bigdir
1953    mkdir -p $bigdir/usr/bin
1954
1955    lfiles="$DEPLIST_FILE"
1956    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
1957    cat $lfiles | GenerateGiantDependencyList $needlist $lines
1958    res=$?
1959    if [ "$YOUR_KERNEL_SUCKS" ]; then
1960        pwd=`pwd`
1961        cd $MINDI_TMP
1962        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
1963            tar cf - ./$i 2>> $LOGFILE | (cd $bigdir ; tar xf -) || Die "PDDI can't copy $i->$bigdir"
1964            if [ "`du -sk $i | cut -f1`" -lt "$(($CHOPSIZE*2))" ] ; then
1965                tar cf - $i 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1966            else
1967                ChopUpAndCopyFile $i $bigdir $CHOPSIZE $BIGNO
1968                BIGNO=$(($BIGNO+1))
1969            fi
1970        done
1971        for i in $EXTRA_MODS ; do
1972            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1973            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1974            for k in $j ; do
1975                if [ "`du -sk $k | cut -f1`" -lt "$CHOPSIZE" ] ; then
1976                    tar cf - $k 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1977                else
1978                    ChopUpAndCopyFile $k $bigdir $CHOPSIZE $BIGNO
1979                    BIGNO=$(($BIGNO+1))
1980                fi
1981                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1982            done
1983        done
1984        cd $pwd
1985    else
1986        ListKernelModulePaths >> $needlist
1987    fi
1988    if [ "$res" -ne "0" ] ; then
1989        Die "You have $res files present in dependency list\nbut absent from filesystem."
1990    fi
1991    FindAndAddUserKeyboardMappingFile
1992    mkdir -p $bigdir/tmp
1993    if [ _"$MONDO_SHARE" != _"" ]; then
1994        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1995        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1996    fi
1997    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1998    DropOptimizedLibraries $needlist $bigdir
1999    echo -en "Assembling dependency files"
2000    CopyDependenciesToDirectory < $needlist $bigdir
2001
2002    # also copy io.sys and msdos.sys, if we can find them
2003    for i in `mount | cut -d' ' -f3` ; do
2004        for j in io.sys msdos.sys ; do
2005            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2006        done
2007    done
2008
2009    # master boot record, too
2010    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2011    if [ "$i" ] ; then
2012        LogIt "Backing up $i's MBR"
2013        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2014        sleep 1
2015        sync
2016        j=$i
2017        [ -h "$j" ] && j=`readlink -f $j`
2018        LogIt "Creating /dev/boot_device ($j)"
2019        mkdir -p $bigdir/dev
2020        cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null || Die "Unable to create /dev/boot_device on ramdisk"
2021    fi
2022
2023    old_pwd=`pwd`
2024    cd $bigdir
2025
2026    [ -e "$MINDI_LIB/aux-tools" ] || Die "aux-tools not found in Mindi's home dir. Do you have multiple copies of Mindi lying around? Please delete them. No, don't e-mail me and ask how. ;) Use 'rm'."
2027    cp -Rdf $MINDI_LIB/aux-tools/* . 2>> $LOGFILE || LogIt "WARNING - error occurred while unzipping aux-tools"
2028    if [ -e "$MINDI_LIB/x11-tools.tgz" ] ; then
2029        tar -zxf $MINDI_LIB/x11-tools.tgz 2>> $LOGFILE || LogIt "WARNING - error occurred while unzipping x11-tools.tgz"
2030    fi
2031    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2032        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2033        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2034    fi
2035    #[ -d "/lib/dev-state" ] && cp --parents -pRdf /lib/dev-state . 2>> $LOGFILE
2036    [ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE | tar xf -
2037    cd $old_pwd
2038    echo -e "$DONE"
2039    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2040    MakeMountlist $MINDI_TMP/mountlist.txt
2041    mkdir -p $bigdir/tmp
2042    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2043    if [ _"$MONDO_SHARE" != _"" ]; then
2044        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2045    fi
2046    [ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm || LVM="false"
2047    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2048    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
2049    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
2050    if [ _"$MONDO_SHARE" != _"" ]; then
2051        for q in filelist.full.gz biggielist.txt ; do
2052            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2053            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2054        done
2055    fi
2056
2057    echo -en "Tarring and zipping the data content..."
2058    size_of_all_tools=`du -sk $bigdir | cut -f1`
2059    (cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null | gzip -9 > $imagesdir/all.tar.gz)
2060    du -sk $imagesdir/*gz >> $LOGFILE
2061    echo -e "$DONE"
2062
2063    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2064    rm -rf $bigdir
2065    rm -f $needlist
2066}
2067
2068
2069ProcessLDD() {
2070    local incoming f d nd bd bnd
2071    read incoming
2072    while [ "$incoming" != "" ]; do
2073        # We take the full path name of the dyn. lib. we want
2074        incoming=`echo "$incoming" | awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2075        for f in $incoming ; do
2076            # echo modified file name if one of the parent dir is a link
2077            # by replacing the original dirname by the destination of the link
2078            d="`dirname $f`"
2079            found="false"
2080            while [ "$d" != "/" ]; do
2081                if [ -h "$d" ]; then
2082                    nd=`readlink -f $d`
2083                    bd=`basename $d`
2084                    bnd=`basename $nd`
2085                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2086                    echo $d
2087                fi
2088                d="`dirname $d`"
2089            done
2090
2091            echo "$f"
2092            echo "`ReadAllLink $f`"
2093        done
2094        read incoming
2095    done
2096}
2097
2098
2099Prompt() {
2100    echo -en "$1"
2101    read line
2102}
2103
2104
2105ReadLine() {
2106    local i incoming
2107    read incoming
2108    i=0
2109    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2110        i=$(($i+1))
2111        read incoming
2112    done
2113    echo "$incoming"
2114}
2115
2116
2117ReplaceIndividualLine() {
2118    local orig_file new_file lino newstring lines_total lines_remaining
2119
2120    orig_file=$1.orig
2121    mv -f $1 $orig_file || Die "Cannot move $1 to $orig_file"
2122    new_file=$1
2123    lino=$2
2124    newstring="$3"
2125    if [ "$lino" = "" ] || [ "$lino" -lt "1" ] ; then
2126        echo "Can't find string" >> $LOGFILE
2127        return 1
2128    fi
2129    lines_total=`wc -l $orig_file | $AWK '{print $1;}'`
2130    lines_remaining=$(($lines_total-$lino))
2131    head -n$(($lino-1)) $orig_file > $new_file
2132    echo "$newstring" >> $new_file
2133    echo "# The above line was added by Mindi, at the user's instruction" >> $new_file
2134    tail -n$lines_remaining $orig_file >> $new_file
2135    echo "Replace line $lino of $new_file with user-specified line, '$newstring'" >> $LOGFILE
2136    [ -x "$orig_file" ] && chmod +x $new_file
2137    rm -f $orig_file
2138    return 0
2139}
2140
2141
2142ScanCDandTape() {
2143    local i
2144
2145    for i in /dev/st0 /dev/ht0 /dev/cdrom /dev/cdrom0 /dev/cdrom 1 ; do
2146        dd if=$i of=/dev/null bs=64k count=1 &> /dev/null
2147    done
2148}
2149
2150
2151SizeOfPartition() {
2152    local devpath drive res stub
2153    device=$1
2154    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2155        res=`SizeOfRaidPartition $device`
2156        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2157        echo "$res"
2158        return 0
2159    fi
2160    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2161    res=`$FDISK -s $device 2>> $LOGFILE`
2162    # end patch
2163    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2`
2164    [ "$res" = "" ] && res="-1"
2165    echo $res
2166    return 0
2167}
2168
2169
2170SizeOfRaidPartition() {
2171    local real_dev smallest_size silly tmp
2172
2173    silly=999999999
2174    smallest_size=$silly
2175
2176    for real_dev in `GetRaidDevMembers $1` ; do
2177        tmp=`SizeOfPartition $real_dev`
2178        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2179    done
2180
2181    if [ "$smallest_size" = "$silly" ] ; then
2182        echo "-1"
2183        return 1
2184    else
2185        echo "$smallest_size"
2186        return 0
2187    fi
2188}
2189
2190
2191StripComments()
2192{
2193    local tempfile
2194
2195    tempfile=$MINDI_TMP/$$.strip.txt
2196    cp -f $1 $tempfile 2>> $LOGFILE
2197    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2198    rm -f $tempfile
2199    echo "Stripped comments from $2" >> $LOGFILE
2200}
2201
2202
2203
2204StripExecutable()
2205{
2206    local tmpfile
2207
2208    tmpfile=$MINDI_TMP/stripped.$$.dat
2209    [ -d "$1" ] || [ -h "$1" ] && return
2210    cp -f $1 $tmpfile 2>> $LOGFILE
2211    strip $tmpfile 2> /dev/null
2212    if [ "$?" -eq "0" ] ; then
2213        cp -f $tmpfile $1 2>> $LOGFILE
2214        echo "Stripped binary $2" >> $LOGFILE
2215    fi
2216    rm -f $tmpfile
2217}
2218
2219
2220TryToFindKernelPath() {
2221    local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2222
2223    we_want_version=`uname -r`
2224    possible_kernels=""
2225    duff_kernels=""
2226   
2227    if [ "$ARCH" = "ia64" ] ; then
2228       root="/boot/efi/efi"
2229    else
2230       root="/"
2231    fi
2232    for fname in `find $root -maxdepth 2 -type f | grep -E 'lin|kern' | grep -Ev '^/proc/|^/net/'` ; do
2233        [ ! -e "$fname" ] && continue
2234        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2235        file $fname | grep -q gzip
2236        if [ "$?" -eq "0" ] ; then
2237            # Used by ia64
2238            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2239        else
2240            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2241        fi
2242        [ "$fkern_ver" = "" ] && continue
2243        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2244        [ -f "$fname" ] || continue
2245        [ -h "$fname" ] && continue
2246        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2247        file $fname | grep -q gzip
2248        if [ "$?" -eq "0" ] ; then
2249            # Used by ia64
2250            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2251                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2252                duff_kernels="$fname $duff_kernels"
2253            else
2254                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2255                possible_kernels="$fname $possible_kernels"
2256            fi
2257        else
2258            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2259                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2260                duff_kernels="$fname $duff_kernels"
2261            else
2262                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2263                possible_kernels="$fname $possible_kernels"
2264            fi
2265        fi
2266    done
2267    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2268        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2269    fi
2270    if [ ! "$possible_kernels" ] ; then
2271        LogIt "No kernel matches exactly. Are there any duff kernels?"
2272        possible_kernels="$duff_kernels"
2273        if [ ! "$possible_kernels" ] ; then
2274            LogIt "Sorry, no duff kernels either"
2275        else
2276            LogIt "I bet you're running Debian or Gentoo, aren't you?"
2277            LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2278        fi
2279    fi
2280    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort -u | tr '\n' ' '`
2281    noof_kernels=`CountItemsIn "$possible_kernels"`
2282    if [ "$noof_kernels" -eq "0" ] ; then
2283        LogIt "Could not find your kernel."
2284        if [ -e "/boot/vmlinuz" ] ; then
2285            LogIt "Using /boot/vmlinuz as a last resort."
2286            output=/boot/vmlinuz
2287        else
2288            output=""
2289        fi
2290    elif [ "$noof_kernels" -eq "1" ] ; then
2291        kernelpath=`echo "$possible_kernels" | sed s/' '//`
2292        echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2293        output="$kernelpath"
2294    else
2295        for i in $possible_kernels ; do
2296            if echo $i | grep "`uname -r`" ; then
2297                LogIt "OK, I used my initiative and found that "
2298                LogIt "$i is probably your kernel. "
2299                output="$i"
2300                return
2301            fi
2302        done
2303        if echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null ; then
2304            output=/boot/vmlinuz
2305            echo "Schlomo, this one's for you." >> $LOGFILE
2306        else
2307            LogIt "Two or more possible kernels found. You may specify any one of them and the "
2308            LogIt "boot disks will still work, probably. If one does not work, try another."
2309            LogIt "$possible_kernels"
2310            echo ""
2311        fi
2312    fi
2313    echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
2314}
2315
2316
2317TurnTgzIntoRdz() {
2318    local tgz_dir_fname rdz_fname ramdisksize tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2319
2320    tgz_dir_fname=$1
2321    rdz_fname=$2
2322    ramdisksize=$3
2323    kernelsize=$4
2324    maxsize=$(($BOOT_SIZE-$kernelsize))
2325    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2326    tempfile=$MINDI_TMP/temp.rd
2327    mountpoint=$MINDI_TMP/mnt1
2328    res=0
2329    echo -en "..."
2330    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2331    echo -en "..."
2332    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2333    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2334    echo -en "..."
2335    mkdir -p $mountpoint
2336    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2337    echo -en "..."
2338    old_pwd=`pwd`
2339    cd $mountpoint
2340    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2341    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2342
2343    cd dev || Die "Can't cd to dev"
2344    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2345    rm -f dev-entries.tgz
2346    cd ..
2347
2348    for w in insmod.static insmod.static.old ; do
2349        s=`which $w 2> /dev/null`
2350        if [ -e "$s" ] ; then
2351            tar cf - $s 2> /dev/null | tar xf -
2352        fi
2353    done
2354
2355    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2356
2357    # Handle the case where busybox and mount are dynamically linked
2358    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2359    if [ $? -eq 0 ]; then
2360        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2361        rm -f bin/mount $MINDI_TMP/busy.lis
2362        mountlis=`grep mount $DEPLIST_FILE`
2363        for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2364            if [ -f $f ]; then
2365                LocateDeps $f >> $MINDI_TMP/busy.lis
2366            fi
2367        done
2368        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null | tar xf -
2369        rm -f $MINDI_TMP/busy.lis
2370    fi
2371
2372    mkdir -p $mountpoint/tmp
2373    # Management of udev (which includes modprobe in rules)
2374    ps auxww | grep -v grep | grep -qw udevd
2375    if [ $? -eq 0 ]; then
2376        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2377        LogIt "udev device manager found"
2378        tar cf - /etc/udev 2> /dev/null | tar xf -
2379        # This avoids NIC remapping if on another machine at restore time on Debian at least
2380        rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2381        tar cf - /lib*/udev 2> /dev/null | tar xf -
2382        if [ -x /sbin/udevd ]; then
2383            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2384            lis=""
2385            # Get only the files which exist in that list
2386            # and potentially their symlink structure
2387            for i in $lis2; do
2388                if [ -h $i ]; then
2389                    j=$i
2390                    while [ -h $j ]; do
2391                        lis="$lis $j"
2392                        j=`readlink $j`
2393                    done
2394                    lis="$lis $j"
2395                elif [ -f $i ]; then
2396                    lis="$lis $i"
2397                fi
2398            done
2399            # And their deps
2400            LocateDeps $lis > $MINDI_TMP/udev.lis
2401            for i in $lis; do
2402                if [ "`echo $i | cut -c1`" = "/" ]; then
2403                    j=`echo $i | cut -c2-`
2404                    rm -f $j
2405                fi
2406            done
2407            tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null | tar xf -
2408            rm -f $MINDI_TMP/udev.lis
2409        else
2410            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2411            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2412            rm -f $mountpoint/tmp/USE-UDEV
2413        fi
2414    fi
2415
2416    # Management of potential HW info (Proliant only at the moment)
2417    rm -rf $MINDI_CACHE/bkphw
2418    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2419    if [ -d $MINDI_CACHE/bkphw ]; then
2420        LogIt "Hardware Information found and saved ..."
2421        cp -rp $MINDI_CACHE/bkphw .
2422        if [ -f $MINDI_CACHE/tools.files ]; then
2423            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2424            LocateDeps $lis > $MINDI_TMP/tools.lis
2425            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null | tar xf -
2426        fi
2427        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2428            mv -f $MINDI_CACHE/mindi-rsthw .
2429            chmod 755 ./mindi-rsthw
2430        fi
2431        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2432    fi
2433
2434    for w in cdrom groovy-stuff ; do
2435        mkdir -p mnt/$w
2436    done
2437    #if [ "$RUN_AFTER_INITIAL_BOOT_PHASE" ] ; then
2438        #ReplaceIndividualLine sbin/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" sbin/init | cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
2439    #fi
2440    if [ "$RUN_AFTER_BOOT_PHASE_COMPLETE" ] ; then
2441        ReplaceIndividualLine sbin/init `grep -n "#ABSORBENTANDYELLOWANDPOROUSISHE#" sbin/init | cut -d':' -f1` "$RUN_AFTER_BOOT_PHASE_COMPLETE"
2442    fi
2443
2444    tar cf - /dev/fd0*[1,2][4,7,8]* 2> /dev/null | tar xf -
2445
2446    cd $old_pwd
2447    echo -en "..."
2448    old_pwd=`pwd`
2449    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2450        cd $MINDI_TMP
2451        needed_modules_path=lib/modules/$FAILSAFE_KVER
2452    else
2453        cd /
2454        if [ "${kernelname}" != "" ]
2455        then
2456            needed_modules_path=lib/modules/${kernelname}
2457        else
2458            needed_modules_path=lib/modules/`uname -r`
2459        fi
2460    fi
2461
2462    needed_modules=""
2463    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
2464
2465    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2466        # For PXE boot
2467        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2468    fi
2469    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2470        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2471    fi
2472    for i in $DENY_MODS; do
2473        echo "Removing $i from the list of modules to load" >> $LOGFILE
2474        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2475    done
2476
2477    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2478    for i in $list_of_groovy_mods ; do
2479        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2480    done
2481
2482    for i in $needed_modules ; do
2483        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2484        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2485        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2486        tar cf - $i 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy $i to $mountpoint"
2487        # Uncompress modules if not using udev and native modprobe
2488        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2489            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2490                echo "Uncompressing $i" >> $LOGFILE
2491                gunzip -f $mountpoint/$i
2492            fi
2493        fi
2494    done
2495
2496    # Also copy modules.dep in case of udev so that normal modprobe works
2497    tar cf - /$needed_modules_path/modules.dep 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint"
2498
2499    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2500        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2501        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2502        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2503        rm -f $mountpoint/sbin/devfsd
2504    fi
2505    cd $old_pwd
2506    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2507    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2508    rm -f $mountpoint/zero
2509    if [ _"$MONDO_SHARE" != _"" ]; then
2510        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2511        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2512        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null || Die "Cannot copy mountlist to ramdisk"
2513        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2514        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2515        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2516        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2517        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2518        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2519    fi
2520    mkdir -p $mountpoint/proc
2521    echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2522    # Determine what filesystem to use for initrd image
2523    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2524    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2525    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2526    case "$gvFileSystem" in
2527    "ext2fs")
2528        # say what will be used
2529        echo "Creating an ext2 initrd image..." >> $LOGFILE
2530        # kernel expects linuxrc in ext2 filesystem
2531        ( cd $mountpoint && ln -sf sbin/init linuxrc )
2532        # unmount loop filesystem and create image file using the standard approach
2533        umount $mountpoint || Die "Cannot unmount $tempfile"
2534        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2535        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2536        ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2537        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2538        rm -f ${rdz_fname}.tmp
2539        # log that we are done
2540        echo "...done." >> $LOGFILE
2541    ;;
2542    "initramfs")
2543        # say what will be used
2544        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2545        # make sure that cpio is there
2546        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2547        # go into filesystem
2548        cd $mountpoint
2549        # kernel expects init in cpio filesystem
2550        ln -sf sbin/init init
2551        # create cpio image file and unmount loop filesystem
2552        find . -print | cpio -o -H newc | gzip -9 > $old_pwd/$rdz_fname 2> /dev/null
2553        cd $old_pwd
2554        umount $mountpoint || Die "Cannot unmount $tempfile"
2555        # log that we are done
2556        echo "...done." >> $LOGFILE
2557    ;;
2558    *)
2559        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2560    ;;
2561    esac
2562    if [ "$res" -eq "0" ] ; then
2563        echo -en "..."
2564    else
2565        echo -en "\rMade an rdz WITH ERRORS.           \n"
2566    fi
2567    return 0
2568}
2569
2570
2571WhichOfTheseModulesAreLoaded() {
2572    local modname loaded_modules
2573    loaded_modules="$MODULES"
2574    for modname in $1 ; do
2575        [ "`echo "$loaded_modules" | grep -w "$modname"`" ] && echo "$modname"
2576    done
2577}
2578
2579
2580
2581##############################################################################
2582#----------------------------------- Main -----------------------------------#
2583##############################################################################
2584
2585# Now we can create what we need
2586mkdir -p $MINDI_TMP
2587
2588# Purge from potential old run
2589if [ _"$MINDI_CACHE" = _"" ]; then
2590    Die "MINDI_CACHE undefined"
2591fi
2592rm -rf $MINDI_CACHE/* 2> /dev/null
2593mkdir -p $MINDI_CACHE
2594
2595if [ "$1" = "--printvar" ] ; then
2596    shift
2597    if [ _"$1" != _"" ] ; then
2598        set | grep -Ew "^$1" | cut -d= -f2
2599    fi
2600    MindiExit 0
2601fi
2602
2603> $LOGFILE
2604echo "mindi v$MINDI_VERSION" >> $LOGFILE
2605echo "$ARCH architecture detected" >> $LOGFILE
2606echo "mindi called with the following arguments:" >> $LOGFILE
2607echo "$@" >> $LOGFILE
2608echo "Start date : `date`" >> $LOGFILE
2609echo "-----------------------------" >> $LOGFILE
2610
2611[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2612
2613# Log some capital variables
2614[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2615echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2616echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2617echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2618[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2619echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2620if [ -f $MINDI_CONFIG ]; then
2621    echo "-----------------------------" >> $LOGFILE
2622    echo " Mindi configuration file    " >> $LOGFILE
2623    echo "-----------------------------" >> $LOGFILE
2624    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2625    echo "-----------------------------" >> $LOGFILE
2626fi
2627
2628
2629trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2630
2631# Sanity checks
2632which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2633which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2634which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2635which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2636if which awk &> /dev/null ; then
2637    if ! which gawk &> /dev/null ; then
2638        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2639    fi
2640fi
2641which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2642[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2643
2644[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2645
2646# Update the PATH variable if incomplete
2647if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2648    PATH=$PATH:/sbin:/usr/sbin
2649    export PATH
2650    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2651    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2652    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2653fi
2654
2655# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2656if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2657    source $MINDI_LIB/FindDistroFailsafe
2658    # Log kernel image
2659    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2660else
2661    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2662fi
2663
2664if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2665    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2666fi
2667
2668### BERLIOS
2669### Fix as it's not mandatory on ia64
2670if [ "$ARCH" = "ia64" ] ; then
2671    if which elilo &> /dev/null ; then
2672        LILO_EXE=elilo
2673    else
2674        LILO_EXE=`which false`
2675    fi
2676else
2677    FindIsolinuxBinary
2678    FindLiloBinary
2679fi
2680trap "Aborted" SIGTERM
2681DONE="\r\t\t\t\t\t\t\t\tDone.         "
2682CHOPSIZE=240
2683BIGNO=0
2684MAX_COMPRESSED_SIZE=1300
2685kernelpath=""
2686MONDO_ROOT=/var/cache/mondo
2687mkdir -p $MONDO_ROOT
2688
2689if [ -d "/proc/lvm" ]; then
2690    # LVM v1
2691    LVMCMD=""
2692    LVM="v1"
2693elif [ -d "/dev/mapper" ]; then
2694    # LVM v2
2695    LVMCMD="lvm"
2696    LVM="v2"
2697else
2698    LVM="false"
2699fi
2700echo "LVM set to $LVM" >> $LOGFILE
2701echo "----------" >> $LOGFILE
2702echo "mount result:" >> $LOGFILE
2703echo "-------------" >> $LOGFILE
2704mount >> $LOGFILE
2705echo "-------------" >> $LOGFILE
2706if [ -e /etc/raidtab ]; then
2707    echo "-------------" >> $LOGFILE
2708    echo "/etc/raidtab content:" >> $LOGFILE
2709    echo "-------------" >> $LOGFILE
2710    cat /etc/raidtab >> $LOGFILE
2711fi
2712echo "-------------" >> $LOGFILE
2713echo "cat /proc/cmdline:" >> $LOGFILE
2714echo "-------------" >> $LOGFILE
2715cat /proc/cmdline >> $LOGFILE
2716echo "-------------" >> $LOGFILE
2717echo "lsmod result:" >> $LOGFILE
2718echo "-------------" >> $LOGFILE
2719lsmod >> $LOGFILE
2720MODULES="`cat /proc/modules | awk '{print $1}'`"
2721if [ -x /usr/sbin/esxcfg-module ]; then
2722    echo "-------------" >> $LOGFILE
2723    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2724    echo "-------------" >> $LOGFILE
2725    echo "VMWare modules" >> $LOGFILE
2726    echo "-------------" >> $LOGFILE
2727    /usr/sbin/esxcfg-module -l >> $LOGFILE
2728    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | awk '{print $1}'`"
2729fi
2730echo "FORCE_MODS:" >> $LOGFILE
2731echo "-------------" >> $LOGFILE
2732echo $FORCE_MODS >> $LOGFILE
2733echo "-------------" >> $LOGFILE
2734echo "DENY_MODS:" >> $LOGFILE
2735echo "-------------" >> $LOGFILE
2736echo $DENY_MODS >> $LOGFILE
2737echo "-------------" >> $LOGFILE
2738echo "df result:" >> $LOGFILE
2739echo "----------" >> $LOGFILE
2740df -T >> $LOGFILE
2741echo "-------------" >> $LOGFILE
2742echo "Liste of extra modules is:" >> $LOGFILE
2743echo "$EXTRA_MODS" >> $LOGFILE
2744echo "-------------" >> $LOGFILE
2745
2746# Compute libata version
2747laver=`modinfo libata | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2748# If libata v2 is used then remove ide-generic as it will perturbate boot
2749if [ "`echo $MODULES | grep libata`" ]; then
2750    if [ "$laver" = "2" ]; then
2751        DENY_MODS="$DENY_MODS ide-generic"
2752        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2753        echo "-------------" >> $LOGFILE
2754    fi
2755fi
2756
2757if [ "$#" -ge "2" ] ; then
2758    if [ "$1" = "--max-compressed-size" ] ; then
2759        MAX_COMPRESSED_SIZE=$2
2760        shift; shift
2761    fi
2762fi
2763
2764FLOPPY_WAS_MOUNTED=""
2765for mtpt in /media/floppy /mnt/floppy /floppy ; do
2766    if mount | grep -w $mtpt &> /dev/null ; then
2767        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2768        umount $mtpt
2769    fi
2770done
2771
2772#
2773# If we have a USB device we need to store info
2774# and remove it from the parameters line
2775#
2776if [ "$#" -ne "0" ] ; then
2777    if [ "$1" = "--usb" ] ; then
2778        shift
2779        USBDEVICE=$1
2780        if [ _"$USBDEVICE" = _"" ]; then
2781            Die "No USB device specified"
2782        fi
2783        shift
2784    fi
2785fi
2786
2787if [ "$#" -ne "0" ] ; then
2788    if [ "$1" = "--findkernel" ] ; then
2789        res=`TryToFindKernelPath`
2790        # Avoids logfile content for mondo
2791        export MONDO_SHARE=""
2792        if [ "$res" = "" ] ; then
2793            MindiExit -1
2794        else
2795            echo "$res"
2796            MindiExit 0
2797        fi
2798    elif [ "$1" = "--locatedeps" ] ; then
2799        [ ! "$2" ] && Die "Please specify the binary to look at"
2800        LocateDeps $2
2801        # Avoids logfile content for mondo
2802        export MONDO_SHARE=""
2803        MindiExit $?
2804    elif [ "$1" = "--readalllink" ] ; then
2805        [ ! "$2" ] && Die "Please specify the binary to look at"
2806        ReadAllLink $2
2807        # Avoids logfile content for mondo
2808        export MONDO_SHARE=""
2809        MindiExit $?
2810    elif [ "$1" = "--makemountlist" ] ; then
2811        [ ! "$2" ] && Die "Please specify the output file"
2812        MakeMountlist $2
2813        # Avoids logfile content for mondo
2814        export MONDO_SHARE=""
2815        MindiExit $?
2816    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2817        echo "Mindi v$MINDI_VERSION"
2818        # Avoids logfile content for mondo
2819        export MONDO_SHARE=""
2820        MindiExit 0
2821    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2822        MONDO_TMP=$2
2823        # Change MINDI_TMP for the one provided by mondo
2824        # So that it can get back the built files
2825        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2826        rmdir $MINDI_TMP
2827        export MINDI_TMP=$MONDO_TMP
2828        mkdir -p $MINDI_TMP
2829        # This is the scratch dir in mondo - subdir images
2830        MINDI_CACHE=$3
2831        if [ _"$MINDI_CACHE" != _"" ]; then
2832            mkdir -p $MINDI_CACHE
2833        fi
2834        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2835###
2836### Sq-Modification...
2837### Attempt to locate kernel specific module path
2838### if module path is found then use it other wise use uname -r to set it...
2839###
2840        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2841        LogIt "kernelname = $kernelname"
2842        LogIt "kernelpath = $kernelpath"
2843        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2844        then
2845           LogIt "Module path for ${kernelpath} not found..."
2846           LogIt "using running kernel\'s modules."
2847           kernelname=`uname -r`
2848        else
2849           LogIt "Using modules for kernel: ${kernelname}"
2850        fi
2851###
2852### end of Sq-Modification
2853###
2854        TAPEDEV=$5
2855        TAPESIZE=$6
2856        FILES_IN_FILELIST=$7
2857        USE_LZO=$8
2858        CDRECOVERY=$9
2859        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
2860            IMAGE_DEVS=""
2861        else
2862            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
2863        fi
2864        if [ "${11}" ] ; then
2865            LILO_OPTIONS=""
2866    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2867        fi
2868        LAST_FILELIST_NUMBER=${12}
2869        ESTIMATED_TOTAL_NOOF_SLICES=${13}
2870        EXCLUDE_DEVS="${14}"
2871        USE_COMP="${15}"
2872        USE_LILO="${16}"
2873        USE_STAR="${17}"
2874        INTERNAL_TAPE_BLOCK_SIZE="${18}"
2875        DIFFERENTIAL="${19}"
2876        USE_GZIP="${20}"
2877        NOT_BOOT="${21}"
2878        [ "$USE_COMP" = "" ] && USE_COMP=yes
2879        [ "$USE_GZIP" = "" ] && USE_GZIP=no
2880        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2881        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2882        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2883        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2884        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2885        then
2886           LogIt "Module path for ${kernelpath} not found..."
2887           LogIt "using running kernel\'s modules."
2888           kernelname=`uname -r`
2889        else
2890           LogIt "Using modules for kernel: ${kernelname}"
2891        fi
2892        [ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2893        # MONDO_ROOT is the real scratchdir
2894        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
2895        if [ _"$MONDO_ROOT" != _"" ]; then
2896            mkdir -p $MONDO_ROOT
2897        else
2898            Die "MONDO_ROOT is undefined"
2899        fi
2900    else
2901        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2902        MindiExit -1
2903    fi
2904fi
2905#ScanCDandTape
2906[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
2907if [ "$CDRECOVERY" = "yes" ] ; then
2908    iso_cfg_file=$MINDI_LIB/isolinux-H.cfg
2909    sys_cfg_file=$MINDI_LIB/syslinux-H.cfg
2910else
2911    iso_cfg_file=$MINDI_LIB/isolinux.cfg
2912    sys_cfg_file=$MINDI_LIB/syslinux.cfg
2913fi
2914
2915[ -e "$iso_cfg_file" ] || Die "Cannot find $iso_cfg_file"
2916if [ _"$MONDO_SHARE" = _"" ]; then
2917    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2918    LogIt "Latest Mindi is available from http://www.mondorescue.org"
2919    LogIt "BusyBox sources are available from http://www.busybox.net"
2920    LogIt "------------------------------------------------------------------------------"
2921else
2922    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2923fi
2924if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2925    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
2926else
2927    LogIt "Unable to find mindi-busybox, please install it"
2928    MindiExit -1
2929fi
2930
2931# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2932insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2933for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2934    insmod $i >> $LOGFILE 2>> $LOGFILE
2935done
2936
2937KERN_DISK_MADE=""
2938
2939echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2940echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2941echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2942if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2943    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2944    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2945    MakeMountlist $MINDI_TMP/mountlist.txt
2946    mkdir -p $MINDI_TMP/small-all/tmp
2947    cd $MINDI_TMP/small-all
2948    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null || Die "Cannot copy small all.tar.gz"
2949    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
2950    sleep 2
2951    LogIt "Done. Exiting."
2952    MindiExit 0
2953fi
2954
2955if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2956    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2957fi
2958
2959if [ "$kernelpath" = "" ] ; then
2960    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2961    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2962    read ch
2963    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2964        USE_OWN_KERNEL="yes"
2965    else
2966        USE_OWN_KERNEL="no"
2967    fi
2968    if [ "$USE_OWN_KERNEL" = "yes" ]; then
2969        YOUR_KERNEL_SUCKS=""
2970        kernelpath=`TryToFindKernelPath`
2971        if [ "$kernelpath" = "" ] ; then
2972            echo -n "Please enter kernel path : "
2973            read kernelpath
2974        fi
2975    else
2976        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2977    fi
2978fi
2979if [ _"$MONDO_SHARE" = _"" ] && [ "$ARCH" != "ia64" ]; then
2980    echo -en "Would you like to use LILO (instead of syslinux)\nfor your boot image (y/[n]) ?"
2981    read ch
2982    if [ "$ch" != "y" ] && [ "$ch" != "Y" ] ; then
2983        USE_LILO=no
2984    else
2985        USE_LILO=yes
2986    fi
2987fi
2988if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
2989    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2990    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2991        source $MINDI_LIB/FindDistroFailsafe
2992        # Log kernel image
2993        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2994        kernelpath="$FAILSAFE_KBIN"
2995        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2996        LogIt "The failsafe kernel is $kernelpath.\n"
2997        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2998        LogIt "disks then it may still be a result of a problem with your kernel.\n"
2999        pwd=`pwd`
3000        cd $MINDI_TMP
3001        mkdir -p lib/modules
3002        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3003        cd $pwd
3004    else
3005        kernelpath=$MINDI_LIB/vmlinuz
3006        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3007        LogIt "However, you are still running your kernel. If Mindi fails to create your"
3008        LogIt "disks then it may still be a result of a problem with your kernel."
3009        pwd=`pwd`
3010        cd $MINDI_TMP
3011        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3012        cd $pwd
3013    fi
3014    YOUR_KERNEL_SUCKS="Your kernel sucks"
3015fi
3016echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3017[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
3018
3019[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3020
3021PrepareDataDiskImages $MINDI_CACHE
3022ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3023rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3024ramdisk_size=$rds
3025
3026echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
3027if [ "$ARCH" = "ia64" ] ; then
3028    PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create ia64 image disk image."
3029else
3030    if [ "$USE_LILO" = "yes" ] ; then
3031        PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create $BOOT_SIZE MB disk image."
3032    else
3033        PrepareBootDiskImage_SYSLINUX $MINDI_CACHE $kernelpath $ramdisk_size || Die "Failed to create $BOOT_SIZE MB disk image."
3034    fi
3035fi
3036
3037[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3038...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3039
3040if [ _"$MONDO_SHARE" = _"" ]; then
3041    ListImagesForUser $MINDI_CACHE
3042    OfferToMakeBootableISO $MINDI_CACHE
3043    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3044        OfferToMakeBootableUSB $MINDI_CACHE
3045    fi
3046    LogIt "Finished."
3047elif [ "$TAPEDEV" ] ; then
3048    rm -f $MINDI_CACHE/{*img,*iso}
3049    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3050        OfferToMakeBootableUSB $MINDI_CACHE
3051    fi
3052    OfferToMakeBootableISO $MINDI_CACHE
3053    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3054        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3055    else
3056        Die "Cannot find all.tar.gz, to be written to tape"
3057    fi
3058elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3059    OfferToMakeBootableUSB $MINDI_CACHE
3060else
3061    OfferToMakeBootableISO $MINDI_CACHE
3062fi
3063# cleanup
3064LogIt "$FRIENDLY_OUTSTRING"
3065for mtpt in $FLOPPY_WAS_MOUNTED ; do
3066    mount $mtpt
3067done
3068MindiExit 0
Note: See TracBrowser for help on using the repository browser.