Context Navigation

source: MondoRescue/branches/2.2.6/mindi/mindi@ 1957

Visit:

Last change on this file since 1957 was 1957, checked in by Bruno Cornec, 16 years ago
Remove useless mindi variable MAX_DISKS
Property svn:keywords set to `Rev Id`
File size: 108.7 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 1957 2008-05-27 23:01:35Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[747]	17
[1511]	18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
[747]	19
[925]	20	#RUN_AFTER_INITIAL_BOOT_PHASE="echo \"Who lives in a pineapple under the sea?\" > /tmp/spongebob.squarepants.txt"
[1880]	21	# after booting from image/CD but before
[747]	22	# accessing auxiliary data disks (or the rest of
	23	# the CD), the initscript will run the above command.
	24
	25	RUN_AFTER_BOOT_PHASE_COMPLETE="ide-opt"
	26	# after the emergency boot process is complete but
	27	# before the init script runs mondorestore, it will
	28	# run this command.
	29
[1691]	30	MINDI_REV=PBREV
	31	MINDI_VER=PBVER
[747]	32
	33	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	34	MINDI_PREFIX=XXX
	35	MINDI_CONF=YYY
	36	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	37	MINDI_LIB=LLL
[747]	38
[925]	39	# Temporary directory for mindi
	40	TMPDIR=/tmp
	41
[1914]	42	EXTRA_SPACE=49152 # increase if you run out of ramdisk space
[1821]	43	BOOT_SIZE=16384 # size of the boot disk
[747]	44
	45	PROMPT_MAKE_CD_IMAGE="yes"
	46	# Ask if you want to make a CD Image to be written?
	47	# if this is set to 'no', then the image will be created automatically
	48
[1684]	49	PROMPT_MAKE_USB_IMAGE="yes"
	50	# Ask if you want to make a USB Image to be written?
	51	# if this is set to 'no', then the image will be created automatically
	52
[966]	53	USE_OWN_KERNEL="yes"
[747]	54	# If set to "no", you will be prompted for whether or not
	55	# you want to use your own kernel, or the supplied default.
	56	# If "yes" mindi will automatically use your own kernel.
[925]	57
[747]	58	MY_FSTAB=/etc/fstab
	59	TAPE_MODS="ht st osst ide-tape ide_tape"
[1944]	60	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
[747]	61
	62	# ide-probe-mod
[1888]	63	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks"
[747]	64	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[1927]	65	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
[1913]	66	CDROM_MODS="$TAPE_MODS $IDE_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 $USB_MODS $PCMCIA_MODS"
[1430]	67	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
[1258]	68	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
[1230]	69	# Replace with that line for HP OCMP e.g.
[1828]	70	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
	71	DENY_MODS="kqemu"
[1399]	72	# Force some modules to be included
[1354]	73	FORCE_MODS=""
[925]	74
[747]	75	LOGFILE=/var/log/mindi.log
[1880]	76	MINDI_CACHE=/var/cache/mindi
[747]	77	BOOT_MEDIA_MESSAGE="\
	78	To format and restore all files automatically, type 'nuke' <enter>.\n\
	79	To restore some/all files interactively, type 'interactive' <enter>.\n\
	80	To compare the archives with your filesystem, type 'compare' <enter>.\n\
	81	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
	82	You may add one or more of the following parameters as well:-\n\n\
	83	donteject - mondorestore will not eject the CD; this is useful if, for\n\
	84	instance, your PC's case has a concealed CD-ROM drive\n\
	85	noresize - your mountlist will not be adjusted to use your unallocated\n\
	86	hard disk space\n\
	87	textonly - do not call any Newt library routines; this is unattractive\n\
	88	but valuable if you find your Newt library has bugs in it\n\n\
	89	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
	90	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
	91	"
[925]	92	FDISK=$MINDI_SBIN/parted2fdisk
[747]	93
[925]	94	# Using a config file allow to overwrite some values
	95	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	96	if [ -f $MINDI_CONFIG ]; then
	97	. $MINDI_CONFIG
	98	fi
[1885]	99	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
	100	ISO_CMD="/usr/bin/mkisofs"
	101	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
[925]	102
[1485]	103	# Now we can create what we need
[1486]	104	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
[940]	105
[747]	106	# ----------------------------------------------------------------------------
	107
	108
	109	AbortHere() {
	110	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	111	Die "Program is terminating in response to signal received from OS/user"
	112	}
	113
	114
	115	HackSyslinuxFile() {
	116	local incoming
	117	incoming=`ReadLine`
	118	while [ "$incoming" ] ; do
	119	echo -en "$incoming" \| sed s/24000/$1/
	120	if [ "`echo "$incoming" \| grep append`" ] ; then
	121	echo -en " $ADDITIONAL_BOOT_PARAMS"
	122	fi
	123	echo -en "\n"
	124	incoming=`ReadLine`
	125	done
	126	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	127	echo -en "label memtest\n kernel memdisk\n append initrd=memtest.img\n\n"
	128	fi
	129	}
	130
	131
	132	Aborted() {
	133	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	134	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	135	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
	136	Die "User abort."
	137	}
	138
	139
	140	AddFileToCfgIfExists() {
	141	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	142	}
	143
	144
	145	AddKeyboardMappingFile() {
	146	local mappath r included_list included_item i res ii sss
	147	mappath=$1
	148	KBDEPTH=$(($KBDEPTH+1))
	149	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	150	if [ -e "$bigdir/$mappath" ] ; then
	151	echo "$mappath already added" >> $LOGFILE
	152	return
	153	elif [ -d "$bigdir/$mappath" ] ; then
	154	echo "Cannot add $mappath: it's a directory. Sorry."
	155	return
	156	fi
	157	echo "Added kbd map $mappath" >> $LOGFILE
	158	if [ ! -e "$mappath" ] ; then
[1764]	159	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	160	if [ ! -e "$mappath" ] ; then
[963]	161	LogIt "Cannot add $mappath: kbd map file not found"
[747]	162	return
	163	fi
	164	else
	165	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
	166	fi
	167
	168	mkdir -p $bigdir/etc
[1919]	169	tar cf - $mappath 2>> /dev/null \| (cd $bigdir ; tar xf -) \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
[747]	170	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
	171	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	172	else
	173	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	174	fi
	175	for included_item in $included_list ; do
[925]	176	if [ ! -e "$included_item" ] ; then
[1764]	177	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
	178	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	179	for ii in $sss ; do
[747]	180	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	181	done
	182	else
	183	AddKeyboardMappingFile $included_item
	184	fi
[747]	185	done
	186	}
	187
	188
	189	ChopUpAndCopyFile() {
	190	local filename slicesize outdir res biggienumber filesize sliceno noof_slices testfile scratchfile
	191	filename=$1
	192	outdir=$2
	193	slicesize=$3
	194	biggienumber=$4
	195
[1885]	196	[ -d "$filename" ] && Die "Cannot chop up $filename: it's a directory. Please amend $DEPLIST_FILE accordingly."
[747]	197	mkdir -p $outdir
	198
	199	sliceno=0
[940]	200	scratchfile=$MINDI_TMP/blah.$$.dat
[963]	201	cp -f $filename $scratchfile 2>> $LOGFILE \|\| Die "CUACF -- cannot copy $filename to $scratchfile - did you run out of disk space?"
[747]	202	[ "`head $scratchfile -n1 \| grep -F "bin/sh"`" != "" ] && StripComments $scratchfile "-$filename-"
	203	[ "`echo "$filename" \| grep -F "etc/termcap"`" != "" ] && StripComments $scratchfile "-$filename-"
[1914]	204
	205	# Uncompress modules only if not using udevd
	206	if [ "`echo "$filename" \| grep -F "lib/modules/" \| grep "\.*o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[925]	207	mv $scratchfile $scratchfile.gz
[963]	208	gunzip -f $scratchfile \|\| LogIt "Cannot gunzip $scratchfile.gz"
[925]	209	filename=`echo "$filename" \| tr '.' '#' \| sed s/#o#gz/#o/ \| sed s/#ko#gz/#ko/ \| tr '#' '.'`
[747]	210	fi
	211	filesize=`du -sk $scratchfile \| cut -f1`
	212	noof_slices=$(($filesize/$slicesize))
	213	echo "$filename" > $outdir/slice-$biggienumber.name
	214	echo "$filesize" > $outdir/slice-$biggienumber.size
	215	[ -x "$scratchfile" ] && StripExecutable $scratchfile "-$filename-"
	216	while [ "$sliceno" -le "$noof_slices" ] ; do
[963]	217	dd if=$scratchfile skip=$(($sliceno*$slicesize)) of=$outdir/slice-$biggienumber.`printf "%03d" $sliceno` bs=1k count=$slicesize &> /dev/null
[747]	218	sliceno=$(($sliceno+1))
	219	done
	220	rm -f $scratchfile
	221	}
	222
	223
	224	CopyBootBFile() {
	225	local copy_to copy_from possible_locations liloc
	226	copy_to=$1
	227	copy_from=/boot/boot.b
	228	liloc=`which lilo.real 2>/dev/null`
	229	[ $liloc ] \|\| liloc=`which lilo 2>/dev/null`
	230	if [ $liloc ]; then
	231	if ! [ `strings $liloc \| grep "boot\.b"` ]; then
[963]	232	LogIt "boot.b files built into lilo; I'll create a dummy."
[747]	233	> $copy_to
	234	return 0
	235	fi
	236	fi
	237	if [ ! -f "$copy_from" ] ; then
	238	LogIt "OK, you don't have a /boot/boot.b file, which is odd because\n most _good_ Linux distributions come with one, even if it's only a softlink"
	239	copy_from=`grep install= /etc/lilo.conf \| grep "\.b" \| cut -d'=' -f2`
	240	if [ ! -f "$copy_from" ] ; then
[963]	241	LogIt "Nor can I find it from your /etc/lilo.conf file. This is very odd."
[747]	242	copy_from=`FindSensibleBootBFile`
[963]	243	LogIt "I'm going to use '$copy_from'"
[747]	244	fi
	245	fi
[963]	246	cp -f $copy_from $copy_to 2>> $LOGFILE \|\| LogIt "CBBF -- warning -- cannot find your boot.b file. That's it, I quit... (j/k)"
[747]	247	}
	248
	249
	250	CopyDependenciesToDirectory() {
[1526]	251	local outdir incoming fname filesize counter d found
[747]	252	outdir=$1
	253	mkdir -p $outdir
	254	incoming=`ReadLine`
	255	counter=0
	256	while [ "$incoming" != "" ] ; do
[1526]	257	# Non absolute file names should not arrive till here => skipped
	258	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
	259	LogIt "Unable to handle $incoming"
	260	incoming=`ReadLine`
	261	continue
	262	fi
	263	# no parent directory of incoming should be a link, copy is not possible in that case
	264	d=`dirname "$incoming"`
	265	found="false"
	266	while [ $d != "/" -a $found = "false" ]; do
	267	[ -h "$d" ] && found="true"
	268	d=`dirname "$d"`
	269	done
	270	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
[747]	271	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
[1526]	272	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[747]	273	filesize=`du -sk $incoming \| cut -f1`
	274	if [ "$filesize" -gt "$(($CHOPSIZE*2))" ] && [ ! -h "$incoming" ] ; then
	275	ChopUpAndCopyFile $incoming $outdir $CHOPSIZE $BIGNO
	276	BIGNO=$(($BIGNO+1))
	277	else
[1914]	278	tar cf - $incoming 2> /dev/null \| (cd $outdir ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
	279
	280	# Only uncompress modules if not using udevd
	281	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[963]	282	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
[925]	283	fi
	284	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
	285	fi
	286	counter=$(($counter+1))
	287	if [ "$counter" -ge "5" ] ; then
	288	counter=0
	289	echo -en "."
	290	fi
[747]	291	fi
	292	incoming=`ReadLine`
	293	done
	294	}
	295
	296
	297	CountItemsIn() {
	298	local r
	299	r=0
	300	for q in $1 ; do
	301	r=$(($r+1))
	302	done
	303	echo $r
	304	}
	305
	306
[925]	307	# Last function called before exiting
	308	# Parameter is exit code value
[931]	309	MindiExit() {
[925]	310	local my_partitions
[747]	311
[925]	312	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
	313	echo "End date : `date`" >> $LOGFILE
[1335]	314	if [ _"$MONDO_SHARE" != _"" ] ; then
[1349]	315	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[1315]	316	cat $LOGFILE >> /var/log/mondoarchive.log
[1349]	317	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
[1315]	318	fi
[747]	319
[925]	320	cd /
[1636]	321	sync&
[747]	322
[1636]	323	# Unmount what could remain mounted
[925]	324	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
	325	[ "$my_partitions" != "" ] && umount $my_partitions
[940]	326	# Clean temporary files only when standalone mindi
[948]	327	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
[940]	328	rm -Rf $MINDI_TMP
	329	fi
[925]	330	exit $1
	331	}
	332
[747]	333	Die() {
[925]	334	local i
[747]	335	if [ "$1" = "" ] ; then
[963]	336	LogIt "FATAL ERROR"
[747]	337	else
[963]	338	LogIt "FATAL ERROR. $1"
[747]	339	fi
	340
[1315]	341	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
[963]	342	LogIt "See http://www.mondorescue.org for more information."
[747]	343	LogIt "WE CANNOT HELP unless you enclose that file.\n"
[925]	344	MindiExit -1
[747]	345	}
	346
	347
	348	DropOptimizedLibraries() {
	349	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	350	filelist=$1
	351	outdir=$2
	352
	353	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	354	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	355	return 0
[747]	356	fi
	357	echo -en "Dropping i686-optimized libraries if appropriate"
	358	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	359	echo -en "."
	360	reason=""
[1483]	361	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	362	echo "$vanilla_lib_name" >> $filelist
	363	resolved=$vanilla_lib_name
[747]	364	echo "Adding $resolved to filelist" >> $LOGFILE
[861]	365	resolved=`ReadAllLink $resolved`
	366	echo "Adding $resolved to filelist" >> $LOGFILE
[859]	367	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	368	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
	369	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
	370	echo "Excluding $optimized_lib_name" >> $LOGFILE
[935]	371	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
[859]	372	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
	373	echo "$vanilla_lib_name" >> $filelist.tmp
	374	mv -f $filelist.tmp $filelist
[747]	375	done
[925]	376	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	377	mv -f $filelist.tmp $filelist
	378	echo -e "$DONE"
	379	}
	380
	381
	382	FindAndAddUserKeyboardMappingFile() {
	383	local r res mapfile mappath included_item included_list keyfile mp locale
[963]	384	LogIt "Analyzing your keyboard's configuration."
[747]	385	KEYDIR=/lib/kbd
	386	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
	387	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
	388	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
[1713]	389	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
	390	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
[747]	391	if [ ! -e "$KEYDIR" ] ; then
[963]	392	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	393	return 0
	394	fi
	395	if [ -e "/etc/sysconfig/keyboard" ] ; then
	396	echo "Red Hat-style config detected." >> $LOGFILE
	397	keyfile=/etc/sysconfig/keyboard
	398	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
	399	echo "Slackware-style config detected." >> $LOGFILE
	400	keyfile=/etc/rc.d/rc.keymap
	401	elif [ -e "/etc/rc.config" ] ; then
	402	echo "Debian-style config detected." >> $LOGFILE
	403	keyfile=/etc/rc.config
	404	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
	405	echo "Debian-style config detected." >> $LOGFILE
	406	echo -en "Adding the following keyboard mapping tables: "
	407	mkdir -p $bigdir/tmp
	408	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	409	KBDEPTH=0
	410	mkdir -p $bigdir/etc/console
[963]	411	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[747]	412	echo -e "$DONE"
	413	return 0
[1713]	414	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	415	echo "Ubuntu-style config detected." >> $LOGFILE
	416	echo -en "Adding the following keyboard mapping tables: "
	417	mkdir -p $bigdir/tmp
	418	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	419	KBDEPTH=0
	420	mkdir -p $bigdir/etc/console-setup
	421	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
	422	echo -e "$DONE"
	423	return 0
[1465]	424	elif [ -e "/etc/conf.d/keymaps" ] ; then
	425	echo "Gentoo-style config detected." >> $LOGFILE
	426	keyfile=/etc/conf.d/keymaps
[747]	427	else
	428	echo -en "Searching for rc.config ..."
	429	keyfile=`find /etc -name rc.config \| head -n1`
	430	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[963]	431	LogIt "Unknown config detected. Default keyboard map will be used."
[747]	432	return
	433	else
	434	echo "Found $keyfile" >> $LOGFILE
	435	fi
	436	fi
	437	if [ ! -e "$KEYDIR/keymaps" ] ; then
[963]	438	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
[747]	439	return
	440	fi
	441	echo "keyfile=$keyfile" >> $LOGFILE
	442	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
	443	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[1465]	444	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
[747]	445	echo "locale=$locale" >> $LOGFILE
[1764]	446	#
	447	# Process the keymaps dir once for all
	448	# AddKeyboardMappingFile will use it recursively
	449	#
	450	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	451	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	452	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	453	# If we have multiple keymaps then log it !!
	454	echo "$mp" \| grep -q " "
	455	if [ $? -eq 0 ]; then
	456	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
	457	echo "The following one will be used" >> $LOGFILE
	458	fi
	459	for i in $mp ; do
	460	mappath=$i
	461	[ -e "$i" ] && [ ! -d "$i" ] && break
	462	done
	463	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[1854]	464	mappath=$(find / -name "/kbd/keymaps//$locale")
[747]	465	fi
	466	echo "mappath = $mappath" >> $LOGFILE
	467	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[963]	468	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
[747]	469	return
	470	fi
	471	echo -en "Adding the following keyboard mapping tables: "
	472	mkdir -p $bigdir/tmp
	473	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
	474	KBDEPTH=0
	475	AddKeyboardMappingFile $mappath
	476	echo -e "$DONE"
[1764]	477	rm -f $MINDI_TMP/keymaps.find
[747]	478	return 0
	479	}
	480
	481
	482	FindIsolinuxBinary() {
	483	ISOLINUX=/usr/lib/isolinux.bin
	484	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	485	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	486	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	487	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	488	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[1854]	489	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[747]	490	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
	491	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
	492	}
	493
	494
	495	FindLiloBinary() {
	496	if which lilo &> /dev/null ; then
[925]	497	if which lilo.real > /dev/null 2> /dev/null ; then
	498	LILO_EXE=lilo.real
[963]	499	LogIt "lilo.real found; will be used instead of lilo (grumble mutter)"
[925]	500	else
	501	LILO_EXE=lilo
	502	fi
	503	$LILO_EXE -V \| grep -F "21.6" > /dev/null && Die "Please upgrade LILO. Your version has a serious bug. If you're not _using_ LILO, fine, uninstall it. :)"
[747]	504	else
[925]	505	LILO_EXE=`which false`
[747]	506	fi
	507	}
	508
[925]	509
[747]	510	FindSensibleBootBFile() {
	511	local i out last
	512	out=""
	513	last=""
	514	for i in `find /boot -type f \| grep -v chain \| grep -v os2 \| sort -u` ; do
	515	if [ "`strings $i 2> /dev/null \| head -n1`" = "LILO" ] ; then
	516	out="$out $i"
[925]	517	last="$i"
[747]	518	fi
	519	done
	520	echo "$last"
	521	}
	522
	523
	524	FindSpecificModuleInPath() {
	525	local modpaths pwd line
	526	pwd=`pwd`
	527	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	528	cd $MINDI_TMP
[747]	529	else
	530	cd /
	531	fi
	532	if [ ! -e "$1" ] ; then
[963]	533	LogIt "WARNING - cannot search specific path '$1'"
[747]	534	return 1
	535	fi
	536	modpaths=`find $1 -name $2.*o -type f`
[1815]	537	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
[747]	538	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
	539	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
	540	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
	541	echo "$modpaths"
	542	cd $pwd
	543	}
	544
	545
	546	GenerateGiantDependencyList() {
	547	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
	548
	549	echo -en "Analyzing dependency requirements"
	550	outfile=$1
[940]	551	tempfile=$MINDI_TMP/$$.txt
[747]	552	incoming=`ReadLine`
	553
	554	> $tempfile
	555	progress=0
	556	res=0
	557	noof_lines=$2
	558	while [ "$incoming" != "" ] ; do
[861]	559	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	560	incoming=`ReadLine`
	561	continue
	562	fi
	563	if [ "$incoming" = "LVMFILES:" ] ; then
	564	break
	565	fi
[747]	566	filelist=`GenerateListForFile "$incoming"`
	567	r=$?
[963]	568	[ "$r" -ne "0" ] && LogIt "$incoming not found"
[747]	569	res=$(($res+$r))
[861]	570	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
[747]	571	for fname in $filelist ; do
[861]	572	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	573	done
	574	progress=$(($progress+1))
	575	echo -en "\r\t\t\t\t\t\t\t\t"
	576	i=$(($progress*100))
	577	i=$(($i/$noof_lines))
	578	echo -en "$i"
	579	echo -en "%"
	580	modres=$(($progress%4))
	581	[ "$modres" -eq "0" ] && echo -en "\t/"
	582	[ "$modres" -eq "1" ] && echo -en "\t-"
	583	[ "$modres" -eq "2" ] && echo -en "\t\\"
	584	[ "$modres" -eq "3" ] && echo -en "\t\|"
	585	incoming=`ReadLine`
	586	done
[861]	587	if [ "$incoming" = "LVMFILES:" ] ; then
	588	incoming=`ReadLine`
	589	lvmversion=""
	590	while [ "$incoming" != "" ] ; do
	591	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	592	incoming=`ReadLine`
	593	continue
	594	fi
	595	filelist=`GenerateListForFile "$incoming"`
	596	for tool in $filelist ; do
	597	lvmresolved=`readlink -f $tool`
[1342]	598	if [ "$tool" = "$lvmresolved" ]; then
[861]	599	echo "$tool" >> $tempfile
	600	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	601	if [ "$lvmversion" = "" ] ; then
	602	lvmversion=`$lvmresolved`
	603	echo "$lvmresolved" >> $tempfile
	604	fi
	605	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	606	if [ "$lvmversion" = "200" ]; then
[861]	607	# pvdata and lvmcreate_initrd don't exist in LVM2
	608	case "$toolstripped" in
	609	"pvdata")
	610	continue
	611	;;
	612	"lvmcreate_initrd")
	613	continue
	614	;;
	615	esac
	616	fi
	617	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	618	if [ -e "$toolpath" ] ; then
	619	echo "$toolpath" >> $tempfile
	620	echo "$tool" >> $tempfile
	621	else
	622	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	623	fi
	624	if [ -e "$toolpath" ] ; then
	625	echo "$toolpath" >> $tempfile
	626	echo "$tool" >> $tempfile
	627	else
	628	echo "Where are your LVM-Tools? Couldn't find $tool"
	629	fi
	630	else
	631	echo "$tool" >> $tempfile
	632	fi
	633	done
	634	progress=$(($progress+1))
	635	echo -en "\r\t\t\t\t\t\t\t\t"
	636	i=$(($progress*100))
	637	i=$(($i/$noof_lines))
	638	echo -en "$i"
	639	echo -en "%"
	640	modres=$(($progress%4))
	641	[ "$modres" -eq "0" ] && echo -en "\t/"
	642	[ "$modres" -eq "1" ] && echo -en "\t-"
	643	[ "$modres" -eq "2" ] && echo -en "\t\\"
	644	[ "$modres" -eq "3" ] && echo -en "\t\|"
	645	incoming=`ReadLine`
	646	done
[747]	647	fi
	648	echo -en "$DONE\nMaking complete dependency list"
	649
	650	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	651	mv -f $tempfile.new $tempfile
	652	> $outfile.pre
	653	progress=0
	654	noof_lines=`cat $tempfile \| wc -l`
[1876]	655	echo "---------------------------------" >> $LOGFILE
	656	echo "List of dependencies: " >> $LOGFILE
	657	echo "---------------------------------" >> $LOGFILE
[747]	658	for fname in `cat $tempfile` ; do
[1876]	659	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	660	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	661	progress=$(($progress+1))
[747]	662	echo -en "\r\t\t\t\t\t\t\t\t"
	663	i=$(($progress*100))
	664	i=$(($i/$noof_lines))
	665	echo -en "$i"
	666	echo -en "%"
[925]	667	modres=$(($progress%4))
[747]	668	[ "$modres" -eq "0" ] && echo -en "\t/"
	669	[ "$modres" -eq "1" ] && echo -en "\t-"
	670	[ "$modres" -eq "2" ] && echo -en "\t\\"
	671	[ "$modres" -eq "3" ] && echo -en "\t\|"
	672	done
[1684]	673	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	674	mkdir -p $bigdir/tmp
	675	mkdir -p $bigdir/sbin
	676	mkdir -p $bigdir/bin
[940]	677	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[963]	678	LogIt "\nIncorporating post-nuke tarball"
[925]	679	old_pwd=`pwd`
	680	cd $bigdir
[963]	681	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
[925]	682	cd $old_pwd
[747]	683	fi
[963]	684	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	685	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	686	else
[963]	687	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	688	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[925]	689	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
	690	Die "Odd."
	691	fi
[963]	692	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
[940]	693	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[963]	694	LogIt "Incorporating NFS-related settings"
[925]	695	for r in NFS-* ISO-PREFIX ; do
[963]	696	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[925]	697	echo "Copying $r to ramdisk" >> $LOGFILE
	698	done
	699	fi
[747]	700	fi
[925]	701	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	702	rm -f $tempfile $outfile.pre
	703	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	704	return $res
	705	}
	706
	707
	708	GenerateListForFile() {
	709	local files_found loc fname incoming i res
	710	incoming="$1"
	711	files_found=""
	712	res=0
	713
	714	for fname in $incoming ; do
	715	files_found="$files_found `LocateFile $fname`"
	716	done
	717
	718	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	719	}
	720
	721
	722	# Returns all disk devices which are part of a raid array
	723	GetAllRaidMembers() {
	724	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	725	}
	726
	727
	728	GetFileSizeList() {
	729	local i
	730	for i in `find $1 -type d -o -print` ; do
	731	du -sk $i
	732	done
	733	}
	734
	735
	736	GetHomeDir() {
	737	local res loc
	738	loc=`which $1 2>/dev/null`
	739	res=`file $loc \| $AWK '{print $NF;}'`
	740	dirname $res
	741	}
	742
	743
[1230]	744	# Check kernel filesystem capabilites for accessing initrd image
	745	#
	746	# Interface definition:
	747	# param #1: absolute path to kernel image
	748	GetInitrdFilesystemToUse() {
	749
	750	# interface test: make sure we have one parameter
	751	if [ $# -ne 1 ]; then
	752	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	753	fi
	754
	755	# interface parameters
	756	local lvKernelImage=$1
	757
	758	# local constants (filesystem magic strings)
	759	local lcMagicCramfs="<3>cramfs: wrong magic"
	760	local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
[1730]	761	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
[1230]	762
	763	# local variables
	764	local lvOffset
	765	local lvScanRes
	766	local lvUseFilesystem
	767
	768	# say where we are.
	769	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
	770
	771	# verify that file exists
	772	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	773
[1566]	774	# Kernel may be gzip compressed
[1730]	775	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	776	if [ $? -eq 0 ]; then
[1730]	777	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	778	else
	779	# get offet of gzip magic "1f8b0800" in file
	780	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
	781	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
	782	lvOffset=`expr $lvOffset / 2`
	783	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
[1230]	784
[1566]	785	# scan kernel image for initrd filessystem support
[1730]	786	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	787	fi
[1230]	788
	789	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
[1730]	790	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
[1230]	791	lvUseFilesystem="ext2fs"
[1730]	792	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
[1230]	793	lvUseFilesystem="initramfs"
[1730]	794	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
[1230]	795	lvUseFilesystem="cramfs"
	796	else
	797	lvUseFilesystem="UNSUPPORTED"
	798	fi
	799
	800	# say what we are using
	801	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
	802
	803	# return file system to use
	804	echo "$lvUseFilesystem"
	805
	806	}
	807
[747]	808	# Searches parent raid device of given disk device
	809	# $1: disk device (i.e. /dev/hda1)
	810	GetParentRaidDev() {
	811	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
	812	}
	813
	814
	815	# Searches members of raid device
	816	# $1: raid device (/dev/md...)
	817	GetRaidDevMembers() {
	818	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	819	}
	820
	821
	822	HackPathsToFailsafe() {
	823	local incoming newpath kver stub i pwd
	824	kver=`uname -r`
	825	incoming=`ReadLine`
	826	pwd=`pwd`
[940]	827	cd $MINDI_TMP
[747]	828	while [ "$incoming" != "" ] ; do
[925]	829	stub=`basename $incoming`
	830	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
	831	for i in $newpath ; do
	832	echo "$i"
	833	done
	834	read incoming
[747]	835	done
	836	cd $pwd
	837	}
	838
	839
	840	ListAllPartitions() {
	841	local res currline partition all_partitions ap_orig remaining i j
	842
[1755]	843	grep -vx " #." $MY_FSTAB \| grep -vx " none." \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
[747]	844	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	845	if [ -e "/vmfs/volumes" ]; then
	846	# For VMWare ESX 3 get the device names of these volumes
	847	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
	848	fi
[747]	849	return
	850	}
	851
	852
	853	ListImagesForUser() {
	854	local path fname
	855	path=$1
	856	echo -en "In the directory '$path' you will find the images:-\n"
	857	for fname in `ls $path \| grep -F mindi-` ; do
	858	printf "%19s " $fname
	859	done
	860	echo " "
	861	}
	862
	863
	864	ListKernelModulePaths() {
	865	local module_list module fname oss r kern
	866	oss="/root/oss/modules"
[1399]	867	module_list="$MODULES"
[1230]	868	# Remove unwanted modules from list
	869	for i in $DENY_MODS; do
	870	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1726]	871	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1230]	872	done
[747]	873	###
	874	### Sq-Modification ... Use kernelname for module search path if specified
	875	###
	876	# kern="`uname -r`"
	877	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
	878	then
	879	kern=${kernelname}
	880	else
	881	kern="`uname -r`"
	882	fi
	883	###
	884	### Sq-Mod End
	885	###
	886	for module in $module_list $EXTRA_MODS ; do
	887	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
	888	echo "module $module --> $r" >> $LOGFILE
	889	[ "$r" ] && echo "$r"
	890	[ -f "$oss" ] && find $oss \| grep -F $module
	891	done
	892	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	893	[ -f "$oss" ] && find $oss.* 2> /dev/null
	894	}
	895
[1784]	896	#
	897	# Critical function which computes all dependencies (dyn. lib.)
	898	# for a list of binaries
	899	#
[747]	900	LocateDeps() {
	901	local incoming fname deps
[1724]	902	incoming="$*"
[747]	903	for fname in $incoming ; do
	904	if [ ! -e "$fname" ] ; then
[963]	905	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
[747]	906	if echo $fname \| grep lvm &> /dev/null ; then
	907	echo "This warning only affects you if you are using LVM." >> $LOGFILE
[1399]	908	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[747]	909	echo "I think you are, so please take heed!" >> $LOGFILE
	910	else
	911	echo "I don't think you are, so don't worry about it." >> $LOGFILE
	912	fi
	913	fi
	914	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
	915	echo "$fname is softlink" >> $LOGFILE
	916	else
[1526]	917	ldd $fname 2> /dev/null \| ProcessLDD
[747]	918	fi
	919	done
	920	}
	921
[925]	922
[860]	923	# Give all symlinks recursively of a full path name
	924	ReadAllLink() {
	925	file="$1"
[747]	926
[1883]	927	echo "$file"
[860]	928	if [ ! -h $file ]; then
	929	return 0
	930	fi
[747]	931
[1883]	932	link=`readlink $file`
[862]	933	d=`dirname $file`
[1883]	934	fchar=`echo $link \| cut -c1`
	935	# If mother dir is a link print it
[1230]	936	if [ -h "$d" ]; then
[1784]	937	echo "$d"
[1883]	938	d=`readlink $d`
	939	fi
	940	if [ "$fchar" != "/" ]; then
	941	# Relative or local link
	942	ReadAllLink "$d/$link"
[860]	943	else
[1883]	944	# Absolute path
	945	ReadAllLink $link
[1230]	946	fi
[860]	947	}
	948
[925]	949
[747]	950	LocateFile() {
	951	local i path fname_to_find location output resolved tmp stub cache_id loclist
	952	fname_to_find="$1"
[1526]	953	# It's an absolute path
[747]	954	if echo "$fname_to_find" \| grep -x "/.*" ; then
[859]	955	output="$fname_to_find"
[860]	956	if [ -h "$output" ] ; then
	957	output="`ReadAllLink $output` $output"
	958	fi
[859]	959	echo "$output"
	960	return 0
[747]	961	fi
[1526]	962	# It's not an absolute path
[747]	963	output=""
[1526]	964	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	965	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	966	[ -h "$path" ] && continue
	967	[ ! -e "$path/$fname_to_find" ] && continue
	968	output="$path/$fname_to_find $output"
	969	if [ -h "$path/$fname_to_find" ] ; then
	970	output="`ReadAllLink $path/$fname_to_find` $output"
	971	fi
[747]	972	done
	973	if [ "$output" = "" ] ; then
[860]	974	return 1
[747]	975	fi
	976	echo "$output"
	977	return 0
	978	}
	979
	980
	981	LogIt() {
	982	if [ -e /dev/stderr ] ; then
[925]	983	echo -e "$1" >> /dev/stderr
[747]	984	elif [ -e /usr/bin/logger ] ; then
[925]	985	/usr/bin/logger -s $1
[747]	986	fi
[965]	987	echo -e "$1" >> $LOGFILE
[747]	988	}
	989
	990
	991	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
	992	MakeMondoConfigFile() {
	993	local outfile use_lzo use_comp use_star
	994	outfile=$1
	995	> $outfile
	996	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	997	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	998	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	999	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	1000	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	1001	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	1002	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	1003	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[747]	1004	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	1005	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	1006	echo "use-lzo $use_lzo" >> $outfile
[998]	1007	echo "use-gzip $use_gzip" >> $outfile
[747]	1008	echo "use-star $use_star" >> $outfile
	1009	echo "use-comp $use_comp" >> $outfile
	1010	echo "datestamp `date`" >> $outfile
	1011	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	1012	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
	1013	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
	1014	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
	1015	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
	1016	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
	1017	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
	1018	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
	1019	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
	1020	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	1021	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1022	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
	1023	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
	1024	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1025	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
	1026	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
	1027	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1028	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1029	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[949]	1030	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1031	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
[1948]	1032	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
[747]	1033	}
	1034
	1035
	1036	MakeMountlist() {
	1037	local scratchdir mountlist all_partitions current_partition \
	1038	partition_size partition_format outstring partition_number \
	1039	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
	1040	absolute_partition old_partition_fmt current_lvolume
	1041
[967]	1042	echo "Your raw fstab file looks like this:" >> $LOGFILE
	1043	echo "------------------------------------" >> $LOGFILE
[747]	1044	cat $MY_FSTAB >> $LOGFILE
[967]	1045	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
	1046	echo "-----------------------------------" >> $LOGFILE
[747]	1047
	1048	# scratchdir, mountlist(OUT)
[940]	1049	scratchdir=$MINDI_TMP
[747]	1050	mountlist=$1
	1051
	1052	# NB: partition = device
	1053	# NB: mountpt = where the device is mounted
	1054
	1055	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1056
[1684]	1057	[ "$mountlist" != "" ] && rm -Rf $mountlist
[747]	1058	> $mountlist
	1059	all_partitions=""
	1060
	1061	if [ $LVM != "false" ]; then
[1885]	1062	echo -en "Analyzing LVM...\n"
[968]	1063	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1064	if [ $? -ne 0 ]; then
[963]	1065	LVM="false"
	1066	fi
[968]	1067	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
[747]	1068	fi
	1069	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1070	# echo "all partitions = $all_partitions" > /dev/stderr
	1071	for i in $IMAGE_DEVS ; do
	1072	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1073	done
	1074	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[1755]	1075	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
[747]	1076	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
	1077	for c_p in $all_partitions ; do
	1078	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
	1079	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1080	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1081	current_partition=`readlink -f $c_p`
[747]	1082	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
	1083	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1084	else
	1085	current_partition="$c_p"
	1086	fi
	1087	[ "$c_p" = "none" ] && continue
	1088	redhat_label=""
[1831]	1089	label=""
[957]	1090	uuid=""
[861]	1091	absolute_partition=`readlink -f $c_p`
[747]	1092	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
	1093
	1094	# Detects noauto partitions not mounted and exclude them
	1095	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1096	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1097	continue
	1098	fi
	1099
	1100	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1101	# current_partition contains only first column of /etc/fstab
	1102	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
	1103	str_to_find_fmt_with=$current_partition
[980]	1104	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1105	actual_dev=""
[853]	1106
	1107	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1108	if [ -x "/sbin/findfs" ]; then
[855]	1109	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
[853]	1110	fi
[747]	1111
[853]	1112	# 2nd try : blkid, the good way for all LABEL except swap
	1113	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	1114	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1115	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1116	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1117	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1118	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1119	for dev in `ls /dev/mapper/*`; do
[963]	1120	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1121	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1122	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1123	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1124	break
	1125	fi
	1126	done
	1127	fi
	1128	fi
	1129
[853]	1130	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1131	# For LVM gives a /dev/mapper entry
	1132	if [ "x$actual_dev" = "x" ]; then
[980]	1133	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1134	fi
	1135
[853]	1136	# 4th try, with vol_id
[747]	1137	# SWAP only
	1138	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1139	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1140	for dev_swap in $list_swaps ; do
	1141	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
	1142	if [ "x$dev_exists" != "x" ]; then
	1143	actual_dev=$dev_swap
	1144	break;
	1145	fi
	1146	done
	1147	fi
	1148
[853]	1149	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1150	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1151	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1152	# SWAP only
[789]	1153	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[853]	1154	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1155	do
	1156	# Location of the swap label for kernel 2.6
[1009]	1157	try_dev_label=`dd bs=1 count=16 skip=1052 if=$try_dev 2> /dev/null`
[853]	1158	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1159	actual_dev=$try_dev
[853]	1160	fi
	1161	done
[747]	1162	fi
[1008]	1163
	1164	# Check if one of all those tries has known success
	1165	if [ "x$actual_dev" != "x" ]; then
	1166	current_partition=$actual_dev
	1167	else
[1885]	1168	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1169	fi
[957]	1170	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1171	# current_partition contains only first column of /etc/fstab
[1009]	1172	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
[957]	1173	str_to_find_fmt_with=$current_partition
[980]	1174	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1175	actual_dev=""
	1176
	1177	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1178	if [ -x "/sbin/findfs" ]; then
	1179	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1180	fi
	1181
[1531]	1182	# 2nd try : blkid, the good way for all UUID except swap
[957]	1183	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	1184	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1185	# For LVM FS it will give a /dev/dm-# which should then be converted
	1186	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1187	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1188	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1189	for dev in `ls /dev/mapper/*`; do
[963]	1190	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1191	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1192	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1193	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1194	break
	1195	fi
	1196	done
	1197	fi
	1198	fi
	1199
	1200	# 3th try, with vol_id
	1201	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1202	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1203	for dev in $list_dev ; do
	1204	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
	1205	if [ "x$dev_exists" != "x" ]; then
	1206	actual_dev=$dev
	1207	break;
	1208	fi
	1209	done
	1210	fi
	1211
[1531]	1212	# 4th try, with dumpuuid (VMWare only ?) for swap
	1213	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
	1214	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
	1215	for dev in $list_dev ; do
	1216	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
	1217	if [ "x$dev_exists" != "x" ]; then
	1218	actual_dev=$dev
	1219	break;
	1220	fi
	1221	done
	1222	fi
	1223
[747]	1224	# Check if one of all those tries has known success
	1225	if [ "x$actual_dev" != "x" ]; then
	1226	current_partition=$actual_dev
	1227	else
[1315]	1228	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[747]	1229	fi
	1230	else
[1863]	1231	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1232	# they use symlinks in fstab unrelated to what is shown in mount !
	1233	if [ _"$partition_mountpt" = _"" ]; then
	1234	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -Ev "^#" \| $AWK '{print $1}'`; do
[1864]	1235	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
[1863]	1236	str_to_find_fmt_with=$tmpp
[1865]	1237	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$tmpp" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1238	break;
[1863]	1239	fi
	1240	done
	1241	else
	1242	str_to_find_fmt_with=$current_partition
	1243	fi
[747]	1244	fi
	1245
	1246	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
	1247	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1248	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1249	# the former is then a link to the latter, so we test whether
	1250	# $current_partition is actually such a link or not and set
[755]	1251	# $current_lvolume accordingly. On Debian you may find more than one answer
	1252	# so we remove the one corresponding to /dev/.static
	1253	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1254	# principle is the same and we need to find the link to it as well.
	1255	# Note that $current_lvolume may well be an
[747]	1256	# ordinary device. It is just to make sure that we feed the right value
	1257	# into any of the LVM tools if possible.
	1258
	1259	current_lvolume="$current_partition"
[763]	1260	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1261	# .static dir are a Debian specificity
[763]	1262	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1263	echo $current_lvolume \| grep -q ' '
[784]	1264	if [ $? -eq 0 ]; then
[755]	1265	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
	1266	fi
[747]	1267	fi
	1268	#
	1269	# End of LVM device style variation code (other than $current_lvolume).
	1270
[745]	1271	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1272	# Size computed via LVM not directly
[747]	1273	partition_size="lvm"
	1274	else
	1275	partition_size=`SizeOfPartition $current_partition`
	1276	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1277	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1278	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
	1279	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
	1280	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
	1281	[ "$partition_format" != "swap" ] && partition_format="swap"
	1282	if [ "$partition_size" = "" ] ; then
	1283	totalsize=0
	1284	items=0
	1285	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
	1286	totalsize=$(($totalsize+$i))
	1287	items=$(($items+1))
	1288	done
	1289	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1290	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1291	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
	1292	fi
	1293	fi
	1294	fi
	1295	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1296	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1297	if [ "$partition_mountpt" = "" ] ; then
	1298	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1299	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1300	partition_mountpt="raid"
	1301	partition_format="raid"
	1302	else
	1303	partition_mountpt="lvm"
	1304	partition_format="lvm"
	1305	fi
	1306	fi
	1307	fi
	1308	psz=$partition_size
	1309	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
	1310	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1311	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1312	partition_mountpt="image"
	1313	old_partition_fmt=$partition_format
	1314	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1315	partition_size=$(($partition_size+1)); # just in case
	1316	if [ "$partition_format" = "Linux" ] ; then
	1317	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
	1318	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
	1319	partition_format=$old_partition_fmt
	1320	fi
	1321	fi
	1322	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
	1323	echo "Excluding $current_partition from mountlist" >> $LOGFILE
	1324	continue
	1325	fi
	1326	if [ ! "$partition_mountpt" ] ; then
[965]	1327	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
[1883]	1328	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1329	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1330	[ "$partition_format" ] && break
	1331	done
[965]	1332	echo "------- $FDISK log end ------------" >> $LOGFILE
[747]	1333	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1334	partition_format="compaq"
	1335	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[963]	1336	LogIt "Unable to find mountpoint of $current_partition - ignoring"
[747]	1337	continue
	1338	fi
	1339	fi
[1755]	1340	if [ "$redhat_label" ]; then
	1341	label="$redhat_label"
[1756]	1342	elif [ "$uuid" ]; then
[1755]	1343	label="$uuid"
	1344	fi
[747]	1345	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1346	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[1755]	1347	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1348	if [ "$current_partition" = "" ] ; then
	1349	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
	1350	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1351	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1352	partition_mountpt=raid
	1353	partition_format=raid
[1755]	1354	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1355	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1356	else
	1357	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
	1358	fi
	1359	elif [ "$partition_format" = "" ] ; then
	1360	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
	1361	elif [ "$partition_size" = "" ] ; then
	1362	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
	1363	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1364	continue
	1365	else
	1366	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
	1367	echo "Stupid bastard..." >> $LOGFILE
	1368	partition_format="vfat"
	1369	fi
[1755]	1370	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1371	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1372	fi
	1373	done
	1374	}
	1375
	1376
	1377	MakeSureNumberIsInteger() {
	1378	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
	1379	if [ "$res" != " " ] && [ "$res" != "" ] ; then
	1380	echo "result = '$res'"
	1381	Die "$1 should be an integer"
	1382	fi
	1383	}
	1384
	1385
	1386	MakeSyslinuxMessageFile() {
	1387	mkdir -p $1
	1388	rmdir $1
	1389	echo -en " " > $1
	1390	if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
	1391	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ >> $1.tmp
	1392	else
	1393	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' '\\r' 'on' 'an' '\/' '`uname -r`' 'on' 'an' '`uname -m`/ >> $1.tmp
	1394	fi
	1395	sed s/%r/"`uname -r`"/ $1.tmp \| sed s/%t/"`hostname`"/ > $1
	1396	rm -f $1.tmp
	1397	if [ "$CDRECOVERY" != "yes" ] ; then
[940]	1398	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	1399	echo -en "Press <enter> to continue.\n" >> $1
[940]	1400	elif [ ! "$MINDI_TMP" ] ; then
[747]	1401	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" >> $1
	1402	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1403	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n" >> $1
	1404	fi
	1405	else
	1406	echo -en "$BOOT_MEDIA_MESSAGE" >> $1
	1407	fi
	1408	else
	1409	echo -en " \
	1410	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1411	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" >> $1
	1412	fi
	1413	}
	1414
	1415
	1416	OfferToMakeBootableISO() {
	1417	local i old_pwd
[1684]	1418	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[966]	1419	echo -en "Shall I make a bootable CD image? (y/[n]) "
[747]	1420	read i
	1421	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1422	fi
[1885]	1423	if [ _"$MINDI_TMP" = _"" ]; then
	1424	Die "MINDI_TMP undefined"
[747]	1425	fi
[940]	1426	rm -Rf $MINDI_TMP/iso
	1427	mkdir -p $MINDI_TMP/iso/{images,archives,isolinux}
[1950]	1428	cp -f $1/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $1/.gz to $MINDI_TMP/iso/images"
[747]	1429	old_pwd=`pwd`
[940]	1430	cd $MINDI_TMP/iso
[747]	1431	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1432	for i in memdisk memtest.bin memtest.img ; do
[953]	1433	j=$MINDI_LIB/$i
	1434	k=$MINDI_TMP/iso/isolinux
	1435	if [ -e "$j" ] ; then
[963]	1436	LogIt "Copying $j to $k"
[953]	1437	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1438	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
[1885]	1439	if [ _"$MONDO_SHARE" != _"" ]; then
	1440	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
	1441	fi
[953]	1442	fi
[747]	1443	done
[940]	1444	MakeSyslinuxMessageFile $MINDI_TMP/iso/isolinux/message.txt
[1885]	1445	cp $kernelpath $MINDI_TMP/iso/isolinux/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/isolinux/vmlinuz). Did you run out of disk space?"
[1929]	1446	cp $MINDI_TMP/mindi.rdz $MINDI_TMP/iso/isolinux/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy mindi.rdz ($MINDI_TMP/mindi.rdz) to $MINDI_TMP/iso/isolinux/initrd.img. Did you run out of disk space?"
[1885]	1447	if [ _"$MONDO_SHARE" != _"" ]; then
[1929]	1448	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
	1449	cp $MINDI_TMP/mindi.rdz $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy mindi.rdz ($MINDI_TMP/mindi.rdz) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
[1885]	1450	fi
[747]	1451	[ -e "$iso_cfg_file" ] \|\| Die "FIXME - unable to find $iso_cfg_file - this should never occur"
[940]	1452	cd $MINDI_TMP/iso/isolinux
[1885]	1453	cat $iso_cfg_file \| HackSyslinuxFile $ramdisk_size $MINDI_TMP/iso > isolinux.cfg \|\| Die "Cannot copy isolinux.cfg to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
[940]	1454	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[1885]	1455	perl -pi -e 's/interactive/iso/' isolinux.cfg
[747]	1456	fi
	1457	if [ "$ARCH" != "ia64" ] ; then
[1885]	1458	cp $ISOLINUX isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso/isolinux - did you run out of disk space?"
[963]	1459	cp $ISOLINUX ../ 2>> $LOGFILE
[747]	1460	fi
[940]	1461	cd $MINDI_TMP/iso
[747]	1462	if [ "$ARCH" != "ia64" ] ; then
[1885]	1463	if [ _"$MONDO_SHARE" != _"" ]; then
	1464	cp -f $MINDI_TMP/iso/isolinux/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
	1465	cp -f $MONDO_SHARE/autorun . 2>> $LOGFILE
	1466	fi
	1467	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1468	else
[1885]	1469	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c isolinux/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
[1950]	1470	rm -f images/mindi-bootroot.$BOOT_SIZE.img
[747]	1471	fi
	1472	if [ "$?" -ne "0" ] ; then
[1885]	1473	echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
[940]	1474	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
[1885]	1475	echo "$ISO_CMD returned the following errors:-"
[940]	1476	cat $MINDI_TMP/mkisofs.log
[963]	1477	LogIt "Failed to create ISO image."
[747]	1478	else
[1880]	1479	echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" \| tee -a $LOGFILE
[747]	1480	fi
[940]	1481	rm -f $MINDI_TMP/mkisofs.log
[747]	1482	cd $old_pwd
	1483	}
	1484
	1485
[1684]	1486	OfferToMakeBootableUSB() {
	1487	local i old_pwd
	1488	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[1786]	1489	echo -n "Shall I make a bootable USB image ? (y/[n]) "
[1764]	1490	read i
	1491	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1492	if [ "$USBDEVICE" = "" ]; then
	1493	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1494	read dev
	1495	USBDEVICE=$dev
[1722]	1496	fi
[1764]	1497	echo "WARNING: This will erase all content on $USBDEVICE"
	1498	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
[1684]	1499	fi
	1500	if [ _"$MINDI_TMP" = _"" ]; then
	1501	Die "MINDI_TMP undefined"
	1502	fi
	1503	rm -Rf $MINDI_TMP/usb
	1504	mkdir -p $MINDI_TMP/usb
	1505	USBPART="${USBDEVICE}1"
	1506
	1507	echo -en "Transforming $USBDEVICE in a Bootable device "
	1508	echo -en "."
	1509	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
	1510	echo "Checking $USBDEVICE" >> $LOGFILE
[1857]	1511	$FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
[1684]	1512	if [ $? -ne 0 ]; then
	1513	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
	1514	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1515	exit -1
	1516	fi
	1517	echo -en "."
[1691]	1518	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
[1721]	1519	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[1684]	1520	echo "Erasing $USBDEVICE" >> $LOGFILE
[1721]	1521	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
[1684]	1522	d
	1523	d
	1524	d
	1525	d
	1526	n
	1527	p
	1528	1
	1529
	1530
	1531	t
	1532	b
	1533	a
	1534	1
	1535	w
	1536	EOF
	1537	if [ $? -ne 0 ]; then
	1538	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
	1539	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1540	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1541	MindiExit -1
	1542	fi
	1543	echo -en "."
	1544	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
[1688]	1545	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
[1684]	1546	if [ $? -ne 0 ]; then
	1547	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
	1548	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
	1549	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1550	MindiExit -1
	1551	fi
	1552	echo -en "."
	1553	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
	1554	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
	1555	if [ $? -ne 0 ]; then
	1556	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
	1557	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
	1558	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1559	MindiExit -1
	1560	fi
	1561	echo -en "."
[1691]	1562	mkdir -p $MINDI_TMP/usb/images
	1563	cp -f $1/.img $1/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
[1684]	1564	echo -en "."
	1565	old_pwd=`pwd`
	1566	cd $MINDI_TMP/usb
	1567	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1568	for i in memdisk memtest.bin memtest.img ; do
	1569	j=$MINDI_LIB/$i
	1570	k=$MINDI_TMP/usb
	1571	if [ -e "$j" ] ; then
	1572	LogIt "Copying $j to $k"
	1573	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1574	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
	1575	fi
	1576	done
	1577	echo -en "."
	1578	MakeSyslinuxMessageFile $MINDI_TMP/usb/message.txt
	1579	echo -en "."
	1580	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/syslinux/vmlinuz). Did you run out of disk space?"
	1581	echo -en "."
	1582	cp $MINDI_TMP/mindi.rdz $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
	1583	echo -en "."
	1584	[ -e "$iso_cfg_file" ] \|\| Die "FIXME - unable to find $iso_cfg_file - this should never occur"
	1585	cat $sys_cfg_file \| HackSyslinuxFile $ramdisk_size $MINDI_TMP/usb > syslinux.cfg \|\| Die "Cannot copy syslinux.cfg from mindi_home to $MINDI_TMP/usb - did you run out of disk space?"
	1586	echo -en "."
	1587	if [ "$NFS_DEV" != "" ] ; then
	1588	perl -pi -e 's/interactive/iso/' syslinux.cfg
	1589	fi
	1590	cd $old_pwd
	1591	echo -en "."
[1721]	1592	umount $MINDI_TMP/usb
[1684]	1593	if [ "$ARCH" != "ia64" ] ; then
	1594	syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
	1595	if [ "$?" -ne "0" ] ; then
	1596	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
	1597	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
	1598	LogIt "Failed to create USB image."
	1599	else
	1600	echo -e "$DONE"
	1601	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
	1602	fi
	1603	rm -f $MINDI_TMP/syslinux.log
	1604	else
	1605	echo "No USB boot support for ia64" \| tee -a $LOGFILE
	1606	MindiExit -1
	1607	fi
	1608	echo -en "."
	1609	}
	1610
	1611
[747]	1612	MakeMessageFile() {
	1613	if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
	1614	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/
	1615	else
	1616	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/
	1617	fi
[1885]	1618	if [ _"$MONDO_SHARE" != _"" ]; then
	1619	if [ "$CDRECOVERY" != "yes" ] ; then
	1620	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
	1621	echo -en "Press <enter> to continue.\n"
	1622	elif [ ! "$MINDI_TMP" ] ; then
	1623	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
	1624	else
	1625	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1626	fi
	1627	fi
	1628	fi
	1629	if [ "$CDRECOVERY" = "yes" ] ; then
	1630	echo -en "\
	1631	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1632	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
	1633	fi
	1634	echo -en "\n\n\n"
	1635	}
	1636
	1637
	1638	MakeLiloConfFile() {
[1885]	1639	local options i ooo
[747]	1640	options=""
[925]	1641
	1642	if [ "$ARCH" != "ia64" ] ; then
	1643	echo -en "boot=/dev/loop0\ndisk=/dev/loop0\n"
	1644	echo -en "install=/boot.b\nmap=/boot.map\n"
	1645	fi
[747]	1646	if [ "$CDRECOVERY" = "yes" ] ; then
	1647	echo -en "default=RESTORE\n"
[1885]	1648	elif [ _"$MONDO_SHARE" != _"" ]; then
[940]	1649	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	1650	echo -en "default=iso\n"
	1651	else
	1652	echo -en "default=interactive\n"
	1653	fi
	1654	else
	1655	echo -en "default=expert\n"
	1656	fi
	1657
	1658	echo -en "prompt\n"
	1659	if [ "$ARCH" != "ia64" ] ; then
	1660	echo -en "vga=normal\nbackup=/dev/null\nmessage=/message\n"
	1661	fi
	1662	if [ "$CDRECOVERY" != "yes" ] ; then
[925]	1663	echo -en "timeout=300\n"
[747]	1664	fi
	1665	echo -en "\n"
	1666	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	1667	options="RESTORE expert"
[1885]	1668	else
	1669	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1670	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	1671	options="iso"
	1672	else
	1673	options="interactive expert compare iso nuke isonuke"
	1674	# hda hdb hdc hdd"
	1675	fi
	1676	else
	1677	options="expert"
[925]	1678	fi
[747]	1679	fi
	1680	for i in $options ; do
[925]	1681	ooo=$i
	1682	[ "$ooo" = "RESTORE" ] && ooo="nuke"
	1683	if [ "$ARCH" = "ia64" ] ; then
	1684	rootpart="root=/dev/ram0\n\t"
	1685	else
	1686	rootpart=""
	1687	fi
[1230]	1688	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/mindi.rdz\n\t${rootpart}append=\" rw ramdisk=$ramdisksize ramdisk_size=$ramdisksize maxcpus=1 $ooo_mode $ADDITIONAL_BOOT_PARAMS"
[747]	1689
[925]	1690	outstr=$outstr" $ooo_mode"
	1691	outstr=$outstr"\"\n"
[1885]	1692	echo -en "$outstr"
[747]	1693	done
	1694	}
	1695
	1696
	1697	PrepareBootDiskImage_LILO() {
[1885]	1698	local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
[747]	1699	imagesdir=$1
[1885]	1700	kernelpath=$2
	1701	ramdisksize=$3
[747]	1702
	1703	retval=0
	1704	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1705	echo -en "Making "$BOOT_SIZE"KB boot disk..."
	1706	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
[747]	1707	echo -en "..."
[1885]	1708	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1709	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1710	mkdir -p $mountpoint
[1885]	1711	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[747]	1712	if [ "$ARCH" = "ia64" ] ; then
[964]	1713	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
	1714	t=vfat
[747]	1715	else
[1880]	1716	echo "Creating ext2 filesystem on $imagefile" >> $LOGFILE
	1717	mke2fs -N 26 -m 0 -F $imagefile &> /dev/null \|\| Die "Unable to create an ext2 file system on $imagefile"
[964]	1718	t=ext2
[747]	1719	fi
[963]	1720	mount -t $t -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[964]	1721	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1722	mkdir -p $mountpoint/etc
	1723	if [ "$ARCH" != "ia64" ] ; then
	1724	liloconf=$mountpoint/etc/lilo.conf
	1725	else
[925]	1726	liloconf=$mountpoint/elilo.conf
[747]	1727	fi
	1728	old_pwd=`pwd`
	1729	cd $mountpoint
	1730	if [ "$ARCH" != "ia64" ] ; then
[963]	1731	tar -zxf $MINDI_LIB/dev.tgz \|\| LogIt "Cannot untar dev.tgz"
[747]	1732	fi
	1733	cd $old_pwd
[1311]	1734	# BERLIOS : Useless and generating errors on CentOS ? (losetup miss a param)
	1735	#losetup /dev/loop0 > /dev/null 2> /dev/null
	1736	#[ "$?" -eq "0" ] \|\| losetup /dev/loop0 -d \|\| Die "Please free up /dev/loop0 by typing 'losetup /dev/loop0 -d'.\nReboot if necessary."
[747]	1737	CopyBootBFile $mountpoint/boot.b
	1738
[1885]	1739	MakeLiloConfFile > $liloconf
[747]	1740
[1230]	1741	# Copy it so that CD-ROM menu entry is satisfied
	1742	if [ "$ARCH" = "ia64" ] ; then
	1743	mountefi=0
[1796]	1744	df -T \| grep /boot/efi \| grep -q vfat
[1230]	1745	if [ $? -ne 0 ]; then
	1746	mount /boot/efi
	1747	if [ $? -ne 0 ]; then
	1748	echo "You have to mount your EFI partition when using mindi"
	1749	MindiExit -1
	1750	fi
	1751	mountefi=1
	1752	fi
[1735]	1753	el=`find /boot/efi -name elilo.efi`
	1754	cp $el $mountpoint
[1794]	1755	cp $liloconf $mountpoint
[1230]	1756	if [ $mountefi -eq 1 ]; then
	1757	umount /boot/efi 2>&1 > /dev/null
	1758	fi
	1759	fi
	1760
[940]	1761	echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint..." >> $LOGFILE
	1762	cp -f $MINDI_TMP/mindi.rdz $mountpoint 2>> $LOGFILE
[747]	1763	if [ "$?" -ne "0" ] ; then
[963]	1764	LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
[940]	1765	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1766	LogIt "Please unload some of your modules and try again."
[940]	1767	rm -f $MINDI_TMP/mtpt.$$
[963]	1768	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
[747]	1769	retval=$(($retval+1))
	1770	fi
[1885]	1771	MakeMessageFile > $mountpoint/message
[747]	1772
	1773	mkdir -p $mountpoint/tmp
[940]	1774	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
[747]	1775	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1776	echo -en "image=/memtest.bin\nlabel=memtest\nn" >> $liloconf
	1777	echo -en "image=/memdisk\nlabel=memtest\nappend=\"initrd=memtest.img\"\n" >> $liloconf
	1778	# echo "Yep, this is a multi-function CD" > $mountpoint/MULTIFUNC
	1779	fi
	1780
[925]	1781	# copy the kernel across
[1230]	1782	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1783	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1784	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1785	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
[1885]	1786	if [ "$?" -ne "0" ] ; then
[925]	1787	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1788	du -sk $mountpoint/* >> $LOGFILE
	1789	echo "--- end of list of files ---" >> $LOGFILE
	1790	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1791	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[747]	1792	rm -f $mountpoint/vmlinuz
[925]	1793	cd $old_pwd
[747]	1794	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1795	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[925]	1796	# losetup /dev/loop0 -d
	1797	rm -f $imagefile
[1885]	1798	return 0
[747]	1799	fi
[1796]	1800	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1801	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1802	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1803	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[1794]	1804	# make it bootable
[747]	1805	rm -f $mountpoint/zero
[963]	1806	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[1885]	1807	if [ ! "$KERN_DISK_MADE" ] ; then
[747]	1808	if [ "$ARCH" != "ia64" ] ; then
[1794]	1809	$LILO_EXE $LILO_OPTIONS -r $mountpoint >> $LOGFILE 2>> $LOGFILE
[747]	1810	else
	1811	/bin/true
	1812	fi
	1813	else
[925]	1814	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
[747]	1815	fi
[925]	1816
	1817	# BERLIOS does not test necessarily what it expects
[747]	1818	if [ $? -ne "0" ] ; then
[925]	1819	if [ "`grep -F "/tmp/dev.0" $LOGFILE`" ] ; then
[963]	1820	LogIt "The '/tmp/dev.0' error is NOT Mindi's fault. It is LILO's."
	1821	LogIt "Please reboot your PC as a workaround."
	1822	Die "LILO sneezed and Mindi caught a cold. Please read the README / FAQ."
[925]	1823	fi
	1824	echo "$LILO_EXE -r $mountpoint ...failed."
	1825	echo -en "Press ENTER to continue."; read line
[963]	1826	LogIt "Cannot run lilo on $mountpoint\nPlease upgrade/downgrade your version of LILO. It has a bug."
[925]	1827	retval=$(($retval+1))
[747]	1828	fi
[963]	1829	cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
[747]	1830	if [ "$ARCH" = "ia64" ] ; then
[963]	1831	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
[747]	1832	fi
	1833	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1834	echo -en "..."
[963]	1835	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1836	if [ "$retval" -eq "0" ] ; then
[1885]	1837	echo -en "...$DONE\n"
[747]	1838	if [ "$KERN_DISK_MADE" ] ; then
[1885]	1839	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1840	fi
	1841	else
[1885]	1842	echo -en "...failed\n"
	1843	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[747]	1844	rm -f $imagefile
	1845	fi
[963]	1846	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1847	return $retval
	1848	}
	1849
	1850
	1851	PrepareBootDiskImage_SYSLINUX() {
[1885]	1852	local imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
[747]	1853	imagesdir=$1
[1885]	1854	kernelpath=$2
	1855	ramdisksize=$3
[747]	1856	do_boot_root_thingy=""
	1857	local retval old_pwd
	1858	retval=0
[925]	1859
[747]	1860	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1861	echo -en "Making "$BOOT_SIZE"KB boot disk..."
	1862	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
[747]	1863	echo -en "..."
[1885]	1864	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1865	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1866	mkdir -p $mountpoint
[1885]	1867	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
	1868	echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
	1869	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
	1870	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
	1871
[963]	1872	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[925]	1873
	1874	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1875	old_pwd=`pwd`
	1876	MakeSyslinuxMessageFile $mountpoint/message.txt
	1877	cd $mountpoint
	1878	[ -e "$sys_cfg_file" ] \|\| Die "Obi Wan, word up?"
	1879	cat $sys_cfg_file \| HackSyslinuxFile $ramdisk_size $mountpoint > syslinux.cfg \|\| Die "Cannot copy syslinux.cfg from mindi_home to tmp_root"
[940]	1880	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[1885]	1881	perl -pi -e 's/interactive/iso/' syslinux.cfg
[747]	1882	fi
	1883	cd $old_pwd
[940]	1884	echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint/initrd.img..." >> $LOGFILE
	1885	cp -f $MINDI_TMP/mindi.rdz $mountpoint/initrd.img 2>> $LOGFILE
[747]	1886	if [ "$?" -ne "0" ] ; then
[963]	1887	LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
[940]	1888	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1889	LogIt "Please unload some of your modules and try again."
[940]	1890	rm -f $MINDI_TMP/mtpt.$$
[963]	1891	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
[747]	1892	retval=$(($retval+1))
	1893	fi
	1894
	1895	mkdir -p $mountpoint/tmp
[940]	1896	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
[747]	1897
[925]	1898	# copy the kernel across
[1230]	1899	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1900	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1901	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1902	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
[1885]	1903	if [ "$?" -ne "0" ] ; then
[747]	1904	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1905	du -sk $mountpoint/* >> $LOGFILE
	1906	echo "--- end of list of files ---" >> $LOGFILE
	1907	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1908	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[747]	1909	rm -f $mountpoint/vmlinuz
	1910	cd $old_pwd
	1911	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1912	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1913
	1914	rm -f $imagefile
[1885]	1915	return 0
[747]	1916	fi
[1796]	1917	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1918	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1919	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1920	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[925]	1921
	1922	# make it bootable
[747]	1923	rm -f $mountpoint/zero
	1924	mkdir -p $mountpoint/etc
[963]	1925	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[747]	1926	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1927	echo -en "..."
[963]	1928	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1929
	1930	if [ "$retval" -eq "0" ] ; then
[1885]	1931	echo -en "...$DONE\n"
[747]	1932	if [ "$KERN_DISK_MADE" ] ; then
	1933	rm -f $imagefile
[1885]	1934	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1935	fi
	1936	else
[1885]	1937	echo -en "...failed\n"
	1938	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[747]	1939	rm -f $imagefile
	1940	fi
[963]	1941	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1942	return $retval
	1943	}
	1944
	1945
	1946	PrepareDataDiskImages() {
[1902]	1947	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles
[747]	1948
	1949	imagesdir=$1
[1902]	1950	rm -f $imagesdir/mindi.iso
[940]	1951	needlist=$MINDI_TMP/what-we-need.txt
	1952	bigdir=$MINDI_TMP/bigdir
[747]	1953	mkdir -p $bigdir/usr/bin
	1954
[1885]	1955	lfiles="$DEPLIST_FILE"
	1956	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
	1957	cat $lfiles \| GenerateGiantDependencyList $needlist $lines
[747]	1958	res=$?
	1959	if [ "$YOUR_KERNEL_SUCKS" ]; then
[925]	1960	pwd=`pwd`
[940]	1961	cd $MINDI_TMP
[747]	1962	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
[1914]	1963	tar cf - ./$i 2>> $LOGFILE \| (cd $bigdir ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir"
[925]	1964	if [ "`du -sk $i \| cut -f1`" -lt "$(($CHOPSIZE*2))" ] ; then
[1914]	1965	tar cf - $i 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
[925]	1966	else
	1967	ChopUpAndCopyFile $i $bigdir $CHOPSIZE $BIGNO
	1968	BIGNO=$(($BIGNO+1))
	1969	fi
[747]	1970	done
[925]	1971	for i in $EXTRA_MODS ; do
[1810]	1972	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
	1973	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
[925]	1974	for k in $j ; do
	1975	if [ "`du -sk $k \| cut -f1`" -lt "$CHOPSIZE" ] ; then
[1914]	1976	tar cf - $k 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
[925]	1977	else
	1978	ChopUpAndCopyFile $k $bigdir $CHOPSIZE $BIGNO
	1979	BIGNO=$(($BIGNO+1))
	1980	fi
	1981	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
	1982	done
	1983	done
	1984	cd $pwd
[747]	1985	else
[925]	1986	ListKernelModulePaths >> $needlist
[747]	1987	fi
	1988	if [ "$res" -ne "0" ] ; then
[1902]	1989	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	1990	fi
	1991	FindAndAddUserKeyboardMappingFile
	1992	mkdir -p $bigdir/tmp
[1885]	1993	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1994	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	1995	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
[747]	1996	fi
	1997	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
	1998	DropOptimizedLibraries $needlist $bigdir
	1999	echo -en "Assembling dependency files"
	2000	CopyDependenciesToDirectory < $needlist $bigdir
	2001
[925]	2002	# also copy io.sys and msdos.sys, if we can find them
[747]	2003	for i in `mount \| cut -d' ' -f3` ; do
[925]	2004	for j in io.sys msdos.sys ; do
[963]	2005	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2006	done
[747]	2007	done
	2008
[925]	2009	# master boot record, too
[940]	2010	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[747]	2011	if [ "$i" ] ; then
[963]	2012	LogIt "Backing up $i's MBR"
[925]	2013	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2014	sleep 1
	2015	sync
	2016	j=$i
	2017	[ -h "$j" ] && j=`readlink -f $j`
[963]	2018	LogIt "Creating /dev/boot_device ($j)"
[925]	2019	mkdir -p $bigdir/dev
[953]	2020	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2021	fi
	2022
	2023	old_pwd=`pwd`
	2024	cd $bigdir
	2025
	2026	[ -e "$MINDI_LIB/aux-tools" ] \|\| Die "aux-tools not found in Mindi's home dir. Do you have multiple copies of Mindi lying around? Please delete them. No, don't e-mail me and ask how. ;) Use 'rm'."
[963]	2027	cp -Rdf $MINDI_LIB/aux-tools/* . 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while unzipping aux-tools"
[747]	2028	if [ -e "$MINDI_LIB/x11-tools.tgz" ] ; then
[963]	2029	tar -zxf $MINDI_LIB/x11-tools.tgz 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while unzipping x11-tools.tgz"
[747]	2030	fi
[1764]	2031	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[747]	2032	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
[1335]	2033	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[747]	2034	fi
[1914]	2035	#[ -d "/lib/dev-state" ] && cp --parents -pRdf /lib/dev-state . 2>> $LOGFILE
	2036	[ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE \| tar xf -
[747]	2037	cd $old_pwd
	2038	echo -e "$DONE"
	2039	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2040	MakeMountlist $MINDI_TMP/mountlist.txt
[1902]	2041	mkdir -p $bigdir/tmp
	2042	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2043	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2044	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2045	fi
[1902]	2046	[ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm \|\| LVM="false"
	2047	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
	2048	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
	2049	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
	2050	if [ _"$MONDO_SHARE" != _"" ]; then
	2051	for q in filelist.full.gz biggielist.txt ; do
	2052	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2053	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2054	done
	2055	fi
	2056
	2057	echo -en "Tarring and zipping the data content..."
	2058	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	2059	(cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null \| gzip -9 > $imagesdir/all.tar.gz)
	2060	du -sk $imagesdir/*gz >> $LOGFILE
	2061	echo -e "$DONE"
	2062
[747]	2063	FRIENDLY_OUTSTRING="Boot and data disk images were created."
[1902]	2064	rm -rf $bigdir
[747]	2065	rm -f $needlist
	2066	}
	2067
	2068
	2069	ProcessLDD() {
[1784]	2070	local incoming f d nd bd bnd
[747]	2071	read incoming
[1784]	2072	while [ "$incoming" != "" ]; do
[859]	2073	# We take the full path name of the dyn. lib. we want
[1526]	2074	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
	2075	for f in $incoming ; do
[1784]	2076	# echo modified file name if one of the parent dir is a link
	2077	# by replacing the original dirname by the destination of the link
	2078	d="`dirname $f`"
	2079	found="false"
	2080	while [ "$d" != "/" ]; do
	2081	if [ -h "$d" ]; then
	2082	nd=`readlink -f $d`
	2083	bd=`basename $d`
	2084	bnd=`basename $nd`
	2085	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
	2086	echo $d
	2087	fi
	2088	d="`dirname $d`"
	2089	done
	2090
[1721]	2091	echo "$f"
	2092	echo "`ReadAllLink $f`"
[747]	2093	done
	2094	read incoming
	2095	done
	2096	}
	2097
	2098
	2099	Prompt() {
	2100	echo -en "$1"
	2101	read line
	2102	}
	2103
	2104
	2105	ReadLine() {
	2106	local i incoming
	2107	read incoming
	2108	i=0
	2109	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2110	i=$(($i+1))
	2111	read incoming
[747]	2112	done
	2113	echo "$incoming"
	2114	}
	2115
	2116
	2117	ReplaceIndividualLine() {
	2118	local orig_file new_file lino newstring lines_total lines_remaining
[925]	2119
[747]	2120	orig_file=$1.orig
	2121	mv -f $1 $orig_file \|\| Die "Cannot move $1 to $orig_file"
	2122	new_file=$1
	2123	lino=$2
	2124	newstring="$3"
	2125	if [ "$lino" = "" ] \|\| [ "$lino" -lt "1" ] ; then
[925]	2126	echo "Can't find string" >> $LOGFILE
	2127	return 1
[747]	2128	fi
[963]	2129	lines_total=`wc -l $orig_file \| $AWK '{print $1;}'`
[747]	2130	lines_remaining=$(($lines_total-$lino))
	2131	head -n$(($lino-1)) $orig_file > $new_file
	2132	echo "$newstring" >> $new_file
	2133	echo "# The above line was added by Mindi, at the user's instruction" >> $new_file
	2134	tail -n$lines_remaining $orig_file >> $new_file
	2135	echo "Replace line $lino of $new_file with user-specified line, '$newstring'" >> $LOGFILE
	2136	[ -x "$orig_file" ] && chmod +x $new_file
	2137	rm -f $orig_file
	2138	return 0
	2139	}
	2140
	2141
	2142	SizeOfPartition() {
	2143	local devpath drive res stub
	2144	device=$1
	2145	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2146	res=`SizeOfRaidPartition $device`
	2147	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2148	echo "$res"
	2149	return 0
[747]	2150	fi
[925]	2151	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2152	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2153	# end patch
[1796]	2154	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
[747]	2155	[ "$res" = "" ] && res="-1"
	2156	echo $res
	2157	return 0
	2158	}
	2159
	2160
	2161	SizeOfRaidPartition() {
	2162	local real_dev smallest_size silly tmp
	2163
	2164	silly=999999999
	2165	smallest_size=$silly
	2166
	2167	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2168	tmp=`SizeOfPartition $real_dev`
	2169	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2170	done
	2171
	2172	if [ "$smallest_size" = "$silly" ] ; then
[925]	2173	echo "-1"
	2174	return 1
[747]	2175	else
[925]	2176	echo "$smallest_size"
	2177	return 0
[747]	2178	fi
	2179	}
	2180
	2181
	2182	StripComments()
	2183	{
	2184	local tempfile
[925]	2185
[940]	2186	tempfile=$MINDI_TMP/$$.strip.txt
[963]	2187	cp -f $1 $tempfile 2>> $LOGFILE
[747]	2188	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
	2189	rm -f $tempfile
	2190	echo "Stripped comments from $2" >> $LOGFILE
	2191	}
	2192
	2193
[925]	2194
[747]	2195	StripExecutable()
	2196	{
	2197	local tmpfile
[925]	2198
[940]	2199	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2200	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2201	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2202	strip $tmpfile 2> /dev/null
	2203	if [ "$?" -eq "0" ] ; then
[963]	2204	cp -f $tmpfile $1 2>> $LOGFILE
[925]	2205	echo "Stripped binary $2" >> $LOGFILE
[747]	2206	fi
	2207	rm -f $tmpfile
	2208	}
	2209
	2210
	2211	TryToFindKernelPath() {
	2212	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
[925]	2213
[747]	2214	we_want_version=`uname -r`
	2215	possible_kernels=""
	2216	duff_kernels=""
	2217
	2218	if [ "$ARCH" = "ia64" ] ; then
	2219	root="/boot/efi/efi"
	2220	else
	2221	root="/"
	2222	fi
[1466]	2223	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
[925]	2224	[ ! -e "$fname" ] && continue
[747]	2225	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[925]	2226	file $fname \| grep -q gzip
	2227	if [ "$?" -eq "0" ] ; then
	2228	# Used by ia64
[747]	2229	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2230	else
[747]	2231	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2232	fi
[747]	2233	[ "$fkern_ver" = "" ] && continue
	2234	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2235	[ -f "$fname" ] \|\| continue
	2236	[ -h "$fname" ] && continue
	2237	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2238	file $fname \| grep -q gzip
	2239	if [ "$?" -eq "0" ] ; then
	2240	# Used by ia64
	2241	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2242	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2243	duff_kernels="$fname $duff_kernels"
	2244	else
[747]	2245	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2246	possible_kernels="$fname $possible_kernels"
[925]	2247	fi
[747]	2248	else
[925]	2249	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2250	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2251	duff_kernels="$fname $duff_kernels"
	2252	else
[747]	2253	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2254	possible_kernels="$fname $possible_kernels"
[925]	2255	fi
[747]	2256	fi
	2257	done
	2258	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[925]	2259	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
[747]	2260	fi
	2261	if [ ! "$possible_kernels" ] ; then
[963]	2262	LogIt "No kernel matches exactly. Are there any duff kernels?"
[747]	2263	possible_kernels="$duff_kernels"
	2264	if [ ! "$possible_kernels" ] ; then
[963]	2265	LogIt "Sorry, no duff kernels either"
[747]	2266	else
[963]	2267	LogIt "I bet you're running Debian or Gentoo, aren't you?"
	2268	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
[747]	2269	fi
	2270	fi
	2271	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
	2272	noof_kernels=`CountItemsIn "$possible_kernels"`
	2273	if [ "$noof_kernels" -eq "0" ] ; then
[963]	2274	LogIt "Could not find your kernel."
[925]	2275	if [ -e "/boot/vmlinuz" ] ; then
[963]	2276	LogIt "Using /boot/vmlinuz as a last resort."
[925]	2277	output=/boot/vmlinuz
[747]	2278	else
[925]	2279	output=""
	2280	fi
[747]	2281	elif [ "$noof_kernels" -eq "1" ] ; then
	2282	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
	2283	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
	2284	output="$kernelpath"
	2285	else
	2286	for i in $possible_kernels ; do
	2287	if echo $i \| grep "`uname -r`" ; then
[925]	2288	LogIt "OK, I used my initiative and found that "
[963]	2289	LogIt "$i is probably your kernel. "
[925]	2290	output="$i"
	2291	return
	2292	fi
[747]	2293	done
[925]	2294	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
	2295	output=/boot/vmlinuz
	2296	echo "Schlomo, this one's for you." >> $LOGFILE
	2297	else
[963]	2298	LogIt "Two or more possible kernels found. You may specify any one of them and the "
	2299	LogIt "boot disks will still work, probably. If one does not work, try another."
	2300	LogIt "$possible_kernels"
[747]	2301	echo ""
[925]	2302	fi
[747]	2303	fi
	2304	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
	2305	}
	2306
	2307
	2308	TurnTgzIntoRdz() {
[1885]	2309	local tgz_dir_fname rdz_fname ramdisksize tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
[925]	2310
[747]	2311	tgz_dir_fname=$1
	2312	rdz_fname=$2
	2313	ramdisksize=$3
[1885]	2314	kernelsize=$4
	2315	maxsize=$(($BOOT_SIZE-$kernelsize))
[747]	2316	maxsize=$(($maxsize*2)); # to allow for compression of 50%
[940]	2317	tempfile=$MINDI_TMP/temp.rd
	2318	mountpoint=$MINDI_TMP/mnt1
[747]	2319	res=0
	2320	echo -en "..."
	2321	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	2322	echo -en "..."
[1764]	2323	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
	2324	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2325	echo -en "..."
	2326	mkdir -p $mountpoint
	2327	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2328	echo -en "..."
	2329	old_pwd=`pwd`
	2330	cd $mountpoint
[959]	2331	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
[747]	2332	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
[1914]	2333
[747]	2334	cd dev \|\| Die "Can't cd to dev"
	2335	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
	2336	rm -f dev-entries.tgz
	2337	cd ..
	2338
	2339	for w in insmod.static insmod.static.old ; do
[925]	2340	s=`which $w 2> /dev/null`
	2341	if [ -e "$s" ] ; then
[1913]	2342	tar cf - $s 2> /dev/null \| tar xf -
[925]	2343	fi
[747]	2344	done
	2345
	2346	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[1724]	2347
[1882]	2348	# Handle the case where busybox and mount are dynamically linked
[1786]	2349	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
	2350	if [ $? -eq 0 ]; then
[1927]	2351	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
	2352	rm -f bin/mount $MINDI_TMP/busy.lis
	2353	mountlis=`grep mount $DEPLIST_FILE`
	2354	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
	2355	if [ -f $f ]; then
	2356	LocateDeps $f >> $MINDI_TMP/busy.lis
	2357	fi
	2358	done
	2359	tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null \| tar xf -
[1786]	2360	rm -f $MINDI_TMP/busy.lis
	2361	fi
	2362
[1914]	2363	mkdir -p $mountpoint/tmp
[1724]	2364	# Management of udev (which includes modprobe in rules)
[1759]	2365	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2366	if [ $? -eq 0 ]; then
[1914]	2367	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[1759]	2368	LogIt "udev device manager found"
[1913]	2369	tar cf - /etc/udev 2> /dev/null \| tar xf -
[1790]	2370	# This avoids NIC remapping if on another machine at restore time on Debian at least
	2371	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
[1913]	2372	tar cf - /lib*/udev 2> /dev/null \| tar xf -
[1720]	2373	if [ -x /sbin/udevd ]; then
[1781]	2374	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
	2375	lis=""
	2376	# Get only the files which exist in that list
[1815]	2377	# and potentially their symlink structure
[1781]	2378	for i in $lis2; do
[1815]	2379	if [ -h $i ]; then
	2380	j=$i
	2381	while [ -h $j ]; do
	2382	lis="$lis $j"
	2383	j=`readlink $j`
	2384	done
	2385	lis="$lis $j"
	2386	elif [ -f $i ]; then
[1781]	2387	lis="$lis $i"
	2388	fi
	2389	done
	2390	# And their deps
[1759]	2391	LocateDeps $lis > $MINDI_TMP/udev.lis
	2392	for i in $lis; do
	2393	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2394	j=`echo $i \| cut -c2-`
	2395	rm -f $j
	2396	fi
	2397	done
[1913]	2398	tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null \| tar xf -
[1721]	2399	rm -f $MINDI_TMP/udev.lis
[1720]	2400	else
	2401	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
[1724]	2402	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
[1914]	2403	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2404	fi
[1716]	2405	fi
[1786]	2406
[1761]	2407	# Management of potential HW info (Proliant only at the moment)
[1880]	2408	rm -rf $MINDI_CACHE/bkphw
	2409	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2410	if [ -d $MINDI_CACHE/bkphw ]; then
[1761]	2411	LogIt "Hardware Information found and saved ..."
[1880]	2412	cp -rp $MINDI_CACHE/bkphw .
	2413	if [ -f $MINDI_CACHE/tools.files ]; then
	2414	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2415	LocateDeps $lis > $MINDI_TMP/tools.lis
[1913]	2416	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null \| tar xf -
[1863]	2417	fi
[1880]	2418	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
	2419	mv -f $MINDI_CACHE/mindi-rsthw .
[1761]	2420	chmod 755 ./mindi-rsthw
	2421	fi
[1880]	2422	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2423	fi
	2424
[1885]	2425	for w in cdrom groovy-stuff ; do
[747]	2426	mkdir -p mnt/$w
	2427	done
[925]	2428	#if [ "$RUN_AFTER_INITIAL_BOOT_PHASE" ] ; then
	2429	#ReplaceIndividualLine sbin/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" sbin/init \| cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
	2430	#fi
[747]	2431	if [ "$RUN_AFTER_BOOT_PHASE_COMPLETE" ] ; then
[925]	2432	ReplaceIndividualLine sbin/init `grep -n "#ABSORBENTANDYELLOWANDPOROUSISHE#" sbin/init \| cut -d':' -f1` "$RUN_AFTER_BOOT_PHASE_COMPLETE"
[747]	2433	fi
	2434
[1913]	2435	tar cf - /dev/fd0[1,2][4,7,8] 2> /dev/null \| tar xf -
[1721]	2436
[747]	2437	cd $old_pwd
	2438	echo -en "..."
	2439	old_pwd=`pwd`
	2440	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	2441	cd $MINDI_TMP
[1885]	2442	needed_modules_path=lib/modules/$FAILSAFE_KVER
[747]	2443	else
	2444	cd /
	2445	if [ "${kernelname}" != "" ]
	2446	then
[1885]	2447	needed_modules_path=lib/modules/${kernelname}
[747]	2448	else
[1885]	2449	needed_modules_path=lib/modules/`uname -r`
[747]	2450	fi
	2451	fi
[1885]	2452
	2453	needed_modules=""
	2454	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
	2455
[940]	2456	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	2457	# For PXE boot
	2458	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2459	fi
[1715]	2460	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
	2461	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
	2462	fi
[1727]	2463	for i in $DENY_MODS; do
	2464	echo "Removing $i from the list of modules to load" >> $LOGFILE
	2465	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2466	done
	2467
[1885]	2468	[ -e "$needed_modules_path" ] \|\| LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
[747]	2469	for i in $list_of_groovy_mods ; do
[1885]	2470	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
[747]	2471	done
[1914]	2472
[1885]	2473	for i in $needed_modules ; do
[747]	2474	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
[940]	2475	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
[747]	2476	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
[1913]	2477	tar cf - $i 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy $i to $mountpoint"
[1914]	2478	# Uncompress modules if not using udev and native modprobe
[1815]	2479	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2480	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
[1914]	2481	echo "Uncompressing $i" >> $LOGFILE
[1727]	2482	gunzip -f $mountpoint/$i
[1815]	2483	fi
[1727]	2484	fi
[747]	2485	done
[1815]	2486
	2487	# Also copy modules.dep in case of udev so that normal modprobe works
[1913]	2488	tar cf - /$needed_modules_path/modules.dep 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy modules.dep to $mountpoint"
[1815]	2489
[1885]	2490	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
[747]	2491	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
	2492	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
	2493	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
	2494	rm -f $mountpoint/sbin/devfsd
	2495	fi
	2496	cd $old_pwd
	2497	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
	2498	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
	2499	rm -f $mountpoint/zero
[1885]	2500	if [ _"$MONDO_SHARE" != _"" ]; then
[747]	2501	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
[940]	2502	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
[953]	2503	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2504	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2505	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2506	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
[998]	2507	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
[747]	2508	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
	2509	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
	2510	fi
	2511	mkdir -p $mountpoint/proc
[1885]	2512	echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
[1230]	2513	# Determine what filesystem to use for initrd image
	2514	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
	2515	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2516	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
	2517	case "$gvFileSystem" in
	2518	"ext2fs")
	2519	# say what will be used
[1821]	2520	echo "Creating an ext2 initrd image..." >> $LOGFILE
[1230]	2521	# kernel expects linuxrc in ext2 filesystem
	2522	( cd $mountpoint && ln -sf sbin/init linuxrc )
	2523	# unmount loop filesystem and create image file using the standard approach
	2524	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[1764]	2525	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
[1794]	2526	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
[1764]	2527	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2528	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2529	rm -f ${rdz_fname}.tmp
[1230]	2530	# log that we are done
[1821]	2531	echo "...done." >> $LOGFILE
[1230]	2532	;;
	2533	"initramfs")
	2534	# say what will be used
[1821]	2535	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
[1230]	2536	# make sure that cpio is there
	2537	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2538	# go into filesystem
	2539	cd $mountpoint
	2540	# kernel expects init in cpio filesystem
	2541	ln -sf sbin/init init
	2542	# create cpio image file and unmount loop filesystem
[1929]	2543	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
[1230]	2544	cd $old_pwd
	2545	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2546	# log that we are done
	2547	echo "...done." >> $LOGFILE
	2548	;;
	2549	*)
	2550	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
	2551	;;
	2552	esac
[747]	2553	if [ "$res" -eq "0" ] ; then
	2554	echo -en "..."
	2555	else
	2556	echo -en "\rMade an rdz WITH ERRORS. \n"
	2557	fi
	2558	return 0
	2559	}
	2560
	2561
	2562	WhichOfTheseModulesAreLoaded() {
	2563	local modname loaded_modules
[1399]	2564	loaded_modules="$MODULES"
[747]	2565	for modname in $1 ; do
[1506]	2566	[ "`echo "$loaded_modules" \| grep -w "$modname"`" ] && echo "$modname"
[747]	2567	done
	2568	}
	2569
	2570
	2571
	2572	##############################################################################
[1021]	2573	#----------------------------------- Main -----------------------------------#
[747]	2574	##############################################################################
	2575
[1885]	2576	# Now we can create what we need
	2577	mkdir -p $MINDI_TMP
[747]	2578
[1885]	2579	# Purge from potential old run
	2580	if [ _"$MINDI_CACHE" = _"" ]; then
	2581	Die "MINDI_CACHE undefined"
	2582	fi
	2583	rm -rf $MINDI_CACHE/* 2> /dev/null
	2584	mkdir -p $MINDI_CACHE
	2585
	2586	if [ "$1" = "--printvar" ] ; then
	2587	shift
	2588	if [ _"$1" != _"" ] ; then
	2589	set \| grep -Ew "^$1" \| cut -d= -f2
	2590	fi
	2591	MindiExit 0
	2592	fi
	2593
[747]	2594	> $LOGFILE
	2595	echo "mindi v$MINDI_VERSION" >> $LOGFILE
	2596	echo "$ARCH architecture detected" >> $LOGFILE
	2597	echo "mindi called with the following arguments:" >> $LOGFILE
	2598	echo "$@" >> $LOGFILE
[800]	2599	echo "Start date : `date`" >> $LOGFILE
[1684]	2600	echo "-----------------------------" >> $LOGFILE
[747]	2601
	2602	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
	2603
[1010]	2604	# Log some capital variables
	2605	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[1885]	2606	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
[1010]	2607	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
	2608	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
	2609	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
	2610	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
[1885]	2611	if [ -f $MINDI_CONFIG ]; then
	2612	echo "-----------------------------" >> $LOGFILE
	2613	echo " Mindi configuration file " >> $LOGFILE
	2614	echo "-----------------------------" >> $LOGFILE
	2615	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
	2616	echo "-----------------------------" >> $LOGFILE
	2617	fi
[1010]	2618
[1885]	2619
[747]	2620	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	2621
	2622	# Sanity checks
	2623	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	2624	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	2625	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	2626	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	2627	if which awk &> /dev/null ; then
	2628	if ! which gawk &> /dev/null ; then
	2629	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
	2630	fi
	2631	fi
	2632	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
	2633	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
	2634
[747]	2635	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	2636
	2637	# Update the PATH variable if incomplete
	2638	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	2639	PATH=$PATH:/sbin:/usr/sbin
	2640	export PATH
	2641	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
	2642	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
	2643	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
	2644	fi
	2645
[1885]	2646	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2647	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
	2648	source $MINDI_LIB/FindDistroFailsafe
	2649	# Log kernel image
	2650	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2651	else
	2652	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
	2653	fi
[1010]	2654
[1737]	2655	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[1010]	2656	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
	2657	fi
	2658
[925]	2659	### BERLIOS
[747]	2660	### Fix as it's not mandatory on ia64
	2661	if [ "$ARCH" = "ia64" ] ; then
[1010]	2662	if which elilo &> /dev/null ; then
	2663	LILO_EXE=elilo
	2664	else
	2665	LILO_EXE=`which false`
	2666	fi
[747]	2667	else
	2668	FindIsolinuxBinary
	2669	FindLiloBinary
	2670	fi
	2671	trap "Aborted" SIGTERM
	2672	DONE="\r\t\t\t\t\t\t\t\tDone. "
	2673	CHOPSIZE=240
	2674	BIGNO=0
	2675	MAX_COMPRESSED_SIZE=1300
	2676	kernelpath=""
[1010]	2677	MONDO_ROOT=/var/cache/mondo
[747]	2678	mkdir -p $MONDO_ROOT
	2679
	2680	if [ -d "/proc/lvm" ]; then
	2681	# LVM v1
	2682	LVMCMD=""
	2683	LVM="v1"
	2684	elif [ -d "/dev/mapper" ]; then
	2685	# LVM v2
	2686	LVMCMD="lvm"
	2687	LVM="v2"
	2688	else
	2689	LVM="false"
	2690	fi
[1021]	2691	echo "LVM set to $LVM" >> $LOGFILE
	2692	echo "----------" >> $LOGFILE
[1230]	2693	echo "mount result:" >> $LOGFILE
	2694	echo "-------------" >> $LOGFILE
	2695	mount >> $LOGFILE
	2696	echo "-------------" >> $LOGFILE
[1315]	2697	if [ -e /etc/raidtab ]; then
	2698	echo "-------------" >> $LOGFILE
	2699	echo "/etc/raidtab content:" >> $LOGFILE
	2700	echo "-------------" >> $LOGFILE
	2701	cat /etc/raidtab >> $LOGFILE
	2702	fi
	2703	echo "-------------" >> $LOGFILE
[1418]	2704	echo "cat /proc/cmdline:" >> $LOGFILE
	2705	echo "-------------" >> $LOGFILE
	2706	cat /proc/cmdline >> $LOGFILE
	2707	echo "-------------" >> $LOGFILE
[1021]	2708	echo "lsmod result:" >> $LOGFILE
	2709	echo "-------------" >> $LOGFILE
	2710	lsmod >> $LOGFILE
[1399]	2711	MODULES="`cat /proc/modules \| awk '{print $1}'`"
[1531]	2712	if [ -x /usr/sbin/esxcfg-module ]; then
[1797]	2713	echo "-------------" >> $LOGFILE
[1497]	2714	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
	2715	echo "-------------" >> $LOGFILE
	2716	echo "VMWare modules" >> $LOGFILE
	2717	echo "-------------" >> $LOGFILE
[1531]	2718	/usr/sbin/esxcfg-module -l >> $LOGFILE
[1764]	2719	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
[1497]	2720	fi
[1851]	2721	echo "FORCE_MODS:" >> $LOGFILE
[1021]	2722	echo "-------------" >> $LOGFILE
[1851]	2723	echo $FORCE_MODS >> $LOGFILE
[1882]	2724	echo "-------------" >> $LOGFILE
[1851]	2725	echo "DENY_MODS:" >> $LOGFILE
	2726	echo "-------------" >> $LOGFILE
	2727	echo $DENY_MODS >> $LOGFILE
	2728	echo "-------------" >> $LOGFILE
[1796]	2729	echo "df result:" >> $LOGFILE
[1785]	2730	echo "----------" >> $LOGFILE
[1796]	2731	df -T >> $LOGFILE
[1785]	2732	echo "-------------" >> $LOGFILE
[1230]	2733	echo "Liste of extra modules is:" >> $LOGFILE
	2734	echo "$EXTRA_MODS" >> $LOGFILE
	2735	echo "-------------" >> $LOGFILE
[747]	2736
[1723]	2737	# Compute libata version
[1797]	2738	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	2739	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	2740	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	2741	if [ "$laver" = "2" ]; then
[1726]	2742	DENY_MODS="$DENY_MODS ide-generic"
[1727]	2743	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
[1726]	2744	echo "-------------" >> $LOGFILE
	2745	fi
[1723]	2746	fi
	2747
[747]	2748	if [ "$#" -ge "2" ] ; then
	2749	if [ "$1" = "--max-compressed-size" ] ; then
	2750	MAX_COMPRESSED_SIZE=$2
	2751	shift; shift
	2752	fi
	2753	fi
	2754
	2755	FLOPPY_WAS_MOUNTED=""
	2756	for mtpt in /media/floppy /mnt/floppy /floppy ; do
	2757	if mount \| grep -w $mtpt &> /dev/null ; then
	2758	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
	2759	umount $mtpt
	2760	fi
	2761	done
	2762
[1684]	2763	#
	2764	# If we have a USB device we need to store info
	2765	# and remove it from the parameters line
	2766	#
[747]	2767	if [ "$#" -ne "0" ] ; then
[1684]	2768	if [ "$1" = "--usb" ] ; then
	2769	shift
	2770	USBDEVICE=$1
	2771	if [ _"$USBDEVICE" = _"" ]; then
	2772	Die "No USB device specified"
	2773	fi
	2774	shift
	2775	fi
	2776	fi
	2777
	2778	if [ "$#" -ne "0" ] ; then
[747]	2779	if [ "$1" = "--findkernel" ] ; then
	2780	res=`TryToFindKernelPath`
[1336]	2781	# Avoids logfile content for mondo
	2782	export MONDO_SHARE=""
[747]	2783	if [ "$res" = "" ] ; then
[925]	2784	MindiExit -1
[747]	2785	else
	2786	echo "$res"
[925]	2787	MindiExit 0
[747]	2788	fi
[1720]	2789	elif [ "$1" = "--locatedeps" ] ; then
	2790	[ ! "$2" ] && Die "Please specify the binary to look at"
	2791	LocateDeps $2
	2792	# Avoids logfile content for mondo
	2793	export MONDO_SHARE=""
	2794	MindiExit $?
[1815]	2795	elif [ "$1" = "--readalllink" ] ; then
	2796	[ ! "$2" ] && Die "Please specify the binary to look at"
	2797	ReadAllLink $2
	2798	# Avoids logfile content for mondo
	2799	export MONDO_SHARE=""
	2800	MindiExit $?
[747]	2801	elif [ "$1" = "--makemountlist" ] ; then
	2802	[ ! "$2" ] && Die "Please specify the output file"
	2803	MakeMountlist $2
[1336]	2804	# Avoids logfile content for mondo
	2805	export MONDO_SHARE=""
[925]	2806	MindiExit $?
	2807	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	2808	echo "Mindi v$MINDI_VERSION"
[1336]	2809	# Avoids logfile content for mondo
	2810	export MONDO_SHARE=""
[925]	2811	MindiExit 0
[747]	2812	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	2813	MONDO_TMP=$2
	2814	# Change MINDI_TMP for the one provided by mondo
	2815	# So that it can get back the built files
[1010]	2816	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
	2817	rmdir $MINDI_TMP
[1486]	2818	export MINDI_TMP=$MONDO_TMP
[953]	2819	mkdir -p $MINDI_TMP
[1696]	2820	# This is the scratch dir in mondo - subdir images
[1880]	2821	MINDI_CACHE=$3
	2822	if [ _"$MINDI_CACHE" != _"" ]; then
	2823	mkdir -p $MINDI_CACHE
[938]	2824	fi
[925]	2825	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[747]	2826	###
	2827	### Sq-Modification...
	2828	### Attempt to locate kernel specific module path
	2829	### if module path is found then use it other wise use uname -r to set it...
	2830	###
	2831	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
[963]	2832	LogIt "kernelname = $kernelname"
	2833	LogIt "kernelpath = $kernelpath"
[747]	2834	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2835	then
[963]	2836	LogIt "Module path for ${kernelpath} not found..."
	2837	LogIt "using running kernel\'s modules."
[747]	2838	kernelname=`uname -r`
	2839	else
[963]	2840	LogIt "Using modules for kernel: ${kernelname}"
[747]	2841	fi
	2842	###
	2843	### end of Sq-Modification
	2844	###
[925]	2845	TAPEDEV=$5
	2846	TAPESIZE=$6
	2847	FILES_IN_FILELIST=$7
	2848	USE_LZO=$8
	2849	CDRECOVERY=$9
[747]	2850	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	2851	IMAGE_DEVS=""
	2852	else
	2853	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	2854	fi
[925]	2855	if [ "${11}" ] ; then
	2856	LILO_OPTIONS=""
	2857	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
	2858	fi
	2859	LAST_FILELIST_NUMBER=${12}
[747]	2860	ESTIMATED_TOTAL_NOOF_SLICES=${13}
	2861	EXCLUDE_DEVS="${14}"
	2862	USE_COMP="${15}"
	2863	USE_LILO="${16}"
[925]	2864	USE_STAR="${17}"
	2865	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	2866	DIFFERENTIAL="${19}"
[998]	2867	USE_GZIP="${20}"
	2868	NOT_BOOT="${21}"
[747]	2869	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	2870	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[747]	2871	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[963]	2872	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
[925]	2873	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
[747]	2874	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
	2875	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2876	then
[963]	2877	LogIt "Module path for ${kernelpath} not found..."
	2878	LogIt "using running kernel\'s modules."
[747]	2879	kernelname=`uname -r`
	2880	else
[963]	2881	LogIt "Using modules for kernel: ${kernelname}"
[747]	2882	fi
[925]	2883	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
[1696]	2884	# MONDO_ROOT is the real scratchdir
[1880]	2885	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	2886	if [ _"$MONDO_ROOT" != _"" ]; then
	2887	mkdir -p $MONDO_ROOT
	2888	else
	2889	Die "MONDO_ROOT is undefined"
	2890	fi
[747]	2891	else
[925]	2892	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
	2893	MindiExit -1
[747]	2894	fi
	2895	fi
	2896	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	2897	if [ "$CDRECOVERY" = "yes" ] ; then
	2898	iso_cfg_file=$MINDI_LIB/isolinux-H.cfg
	2899	sys_cfg_file=$MINDI_LIB/syslinux-H.cfg
	2900	else
	2901	iso_cfg_file=$MINDI_LIB/isolinux.cfg
	2902	sys_cfg_file=$MINDI_LIB/syslinux.cfg
	2903	fi
	2904
	2905	[ -e "$iso_cfg_file" ] \|\| Die "Cannot find $iso_cfg_file"
[1684]	2906	if [ _"$MONDO_SHARE" = _"" ]; then
[963]	2907	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	2908	LogIt "Latest Mindi is available from http://www.mondorescue.org"
	2909	LogIt "BusyBox sources are available from http://www.busybox.net"
[747]	2910	LogIt "------------------------------------------------------------------------------"
	2911	else
[1315]	2912	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
[747]	2913	fi
[1005]	2914	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
	2915	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
	2916	else
	2917	LogIt "Unable to find mindi-busybox, please install it"
	2918	MindiExit -1
	2919	fi
[747]	2920
	2921	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
	2922	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
	2923	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
	2924	insmod $i >> $LOGFILE 2>> $LOGFILE
	2925	done
	2926
	2927	KERN_DISK_MADE=""
	2928
	2929	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
	2930	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
	2931	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
	2932	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[963]	2933	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
[940]	2934	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	2935	MakeMountlist $MINDI_TMP/mountlist.txt
	2936	mkdir -p $MINDI_TMP/small-all/tmp
	2937	cd $MINDI_TMP/small-all
[953]	2938	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
[1913]	2939	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
[747]	2940	sleep 2
[963]	2941	LogIt "Done. Exiting."
[925]	2942	MindiExit 0
[747]	2943	fi
	2944
[1690]	2945	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1684]	2946	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
	2947	fi
	2948
[747]	2949	if [ "$kernelpath" = "" ] ; then
[1335]	2950	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[966]	2951	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
	2952	read ch
	2953	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	2954	USE_OWN_KERNEL="yes"
[1809]	2955	else
	2956	USE_OWN_KERNEL="no"
[747]	2957	fi
	2958	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	2959	YOUR_KERNEL_SUCKS=""
	2960	kernelpath=`TryToFindKernelPath`
	2961	if [ "$kernelpath" = "" ] ; then
	2962	echo -n "Please enter kernel path : "
	2963	read kernelpath
	2964	fi
[747]	2965	else
[925]	2966	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
[747]	2967	fi
	2968	fi
[1575]	2969	if [ _"$MONDO_SHARE" = _"" ] && [ "$ARCH" != "ia64" ]; then
[1950]	2970	USE_LILO=no
[747]	2971	fi
	2972	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
[1885]	2973	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2974	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
	2975	source $MINDI_LIB/FindDistroFailsafe
	2976	# Log kernel image
	2977	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2978	kernelpath="$FAILSAFE_KBIN"
	2979	LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
	2980	LogIt "The failsafe kernel is $kernelpath.\n"
	2981	LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
	2982	LogIt "disks then it may still be a result of a problem with your kernel.\n"
	2983	pwd=`pwd`
	2984	cd $MINDI_TMP
	2985	mkdir -p lib/modules
	2986	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
	2987	cd $pwd
	2988	else
	2989	kernelpath=$MINDI_LIB/vmlinuz
	2990	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
	2991	LogIt "However, you are still running your kernel. If Mindi fails to create your"
	2992	LogIt "disks then it may still be a result of a problem with your kernel."
	2993	pwd=`pwd`
	2994	cd $MINDI_TMP
	2995	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
	2996	cd $pwd
	2997	fi
[747]	2998	YOUR_KERNEL_SUCKS="Your kernel sucks"
	2999	fi
[1880]	3000	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[963]	3001	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
[747]	3002
[965]	3003	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
[747]	3004
[1880]	3005	PrepareDataDiskImages $MINDI_CACHE
[747]	3006	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	3007	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
	3008	ramdisk_size=$rds
	3009
	3010	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
[1567]	3011	if [ "$ARCH" = "ia64" ] ; then
[1885]	3012	PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size \|\| Die "Failed to create ia64 image disk image."
[1567]	3013	else
	3014	if [ "$USE_LILO" = "yes" ] ; then
[1885]	3015	PrepareBootDiskImage_LILO $MINDI_CACHE $kernelpath $ramdisk_size \|\| Die "Failed to create $BOOT_SIZE MB disk image."
[1567]	3016	else
[1885]	3017	PrepareBootDiskImage_SYSLINUX $MINDI_CACHE $kernelpath $ramdisk_size \|\| Die "Failed to create $BOOT_SIZE MB disk image."
[747]	3018	fi
	3019	fi
	3020
	3021	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3022	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3023
[1684]	3024	if [ _"$MONDO_SHARE" = _"" ]; then
[1880]	3025	ListImagesForUser $MINDI_CACHE
[1885]	3026	OfferToMakeBootableISO $MINDI_CACHE
[1684]	3027	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1880]	3028	OfferToMakeBootableUSB $MINDI_CACHE
[1684]	3029	fi
[963]	3030	LogIt "Finished."
[747]	3031	elif [ "$TAPEDEV" ] ; then
[1901]	3032	rm -f $MINDI_CACHE/{img,iso}
[1898]	3033	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
	3034	OfferToMakeBootableUSB $MINDI_CACHE
	3035	fi
[1880]	3036	OfferToMakeBootableISO $MINDI_CACHE
	3037	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3038	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3039	else
[925]	3040	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3041	fi
[1695]	3042	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1880]	3043	OfferToMakeBootableUSB $MINDI_CACHE
[747]	3044	else
[1880]	3045	OfferToMakeBootableISO $MINDI_CACHE
[747]	3046	fi
	3047	# cleanup
[963]	3048	LogIt "$FRIENDLY_OUTSTRING"
[747]	3049	for mtpt in $FLOPPY_WAS_MOUNTED ; do
	3050	mount $mtpt
	3051	done
[925]	3052	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: