source: MondoRescue/branches/stable/mindi-busybox/testsuite/testing.sh @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 12 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

  • Property svn:executable set to *
File size: 3.5 KB
Line 
1# Simple test harness infrastructurei for BusyBox
2#
3# Copyright 2005 by Rob Landley
4#
5# License is GPLv2, see LICENSE in the busybox tarball for full license text.
6
7# This file defines two functions, "testing" and "optionflag"
8
9# The following environment variables may be set to enable optional behavior
10# in "testing":
11#    VERBOSE - Print the diff -u of each failed test case.
12#    DEBUG - Enable command tracing.
13#    SKIP - do not perform this test (this is set by "optionflag")
14#
15# The "testing" function takes five arguments:
16#   $1) Description to display when running command
17#   $2) Command line arguments to command
18#   $3) Expected result (on stdout)
19#   $4) Data written to file "input"
20#   $5) Data written to stdin
21#
22# The exit value of testing is the exit value of the command it ran.
23#
24# The environment variable "FAILCOUNT" contains a cumulative total of the
25# number of failed tests.
26
27# The "optional" function is used to skip certain tests, ala:
28#   optionflag CONFIG_FEATURE_THINGY
29#
30# The "optional" function checks the environment variable "OPTIONFLAGS",
31# which is either empty (in which case it always clears SKIP) or
32# else contains a colon-separated list of features (in which case the function
33# clears SKIP if the flag was found, or sets it to 1 if the flag was not found).
34
35export FAILCOUNT=0
36export SKIP=
37
38# Helper functions
39
40optional()
41{
42  option=`echo "$OPTIONFLAGS" | egrep "(^|:)$1(:|\$)"`
43  # Not set?
44  if [ -z "$1" ] || [ -z "$OPTIONFLAGS" ] || [ ${#option} -ne 0 ]
45  then
46    SKIP=""
47    return
48  fi
49  SKIP=1
50}
51
52# The testing function
53
54testing()
55{
56  NAME="$1"
57  [ -z "$1" ] && NAME=$2
58
59  if [ $# -ne 5 ]
60  then
61    echo "Test $NAME has the wrong number of arguments ($# $*)" >&2
62    exit
63  fi
64
65  [ -n "$DEBUG" ] && set -x
66
67  if [ -n "$SKIP" ]
68  then
69    echo "SKIPPED: $NAME"
70    return 0
71  fi
72
73  echo -ne "$3" > expected
74  echo -ne "$4" > input
75  [ -z "$VERBOSE" ] || echo "echo '$5' | $2"
76  echo -ne "$5" | eval "$2" > actual
77  RETVAL=$?
78
79  cmp expected actual >/dev/null 2>/dev/null
80  if [ $? -ne 0 ]
81  then
82    FAILCOUNT=$[$FAILCOUNT+1]
83    echo "FAIL: $NAME"
84    [ -n "$VERBOSE" ] && diff -u expected actual
85  else
86    echo "PASS: $NAME"
87  fi
88  rm -f input expected actual
89
90  [ -n "$DEBUG" ] && set +x
91
92  return $RETVAL
93}
94
95# Recursively grab an executable and all the libraries needed to run it.
96# Source paths beginning with / will be copied into destpath, otherwise
97# the file is assumed to already be there and only its library dependencies
98# are copied.
99
100mkchroot()
101{
102  [ $# -lt 2 ] && return
103
104  echo -n .
105
106  dest=$1
107  shift
108  for i in "$@"
109  do
110    [ "${i:0:1}" == "/" ] || i=$(which $i)
111    [ -f "$dest/$i" ] && continue
112    if [ -e "$i" ]
113    then
114      d=`echo "$i" | grep -o '.*/'` &&
115      mkdir -p "$dest/$d" &&
116      cat "$i" > "$dest/$i" &&
117      chmod +x "$dest/$i"
118    else
119      echo "Not found: $i"
120    fi
121    mkchroot "$dest" $(ldd "$i" | egrep -o '/.* ')
122  done
123}
124
125# Set up a chroot environment and run commands within it.
126# Needed commands listed on command line
127# Script fed to stdin.
128
129dochroot()
130{
131  mkdir tmpdir4chroot
132  mount -t ramfs tmpdir4chroot tmpdir4chroot
133  mkdir -p tmpdir4chroot/{etc,sys,proc,tmp,dev}
134  cp -L testing.sh tmpdir4chroot
135
136  # Copy utilities from command line arguments
137
138  echo -n "Setup chroot"
139  mkchroot tmpdir4chroot $*
140  echo
141
142  mknod tmpdir4chroot/dev/tty c 5 0
143  mknod tmpdir4chroot/dev/null c 1 3
144  mknod tmpdir4chroot/dev/zero c 1 5
145
146  # Copy script from stdin
147
148  cat > tmpdir4chroot/test.sh
149  chmod +x tmpdir4chroot/test.sh
150  chroot tmpdir4chroot /test.sh
151  umount -l tmpdir4chroot
152  rmdir tmpdir4chroot
153}
154
Note: See TracBrowser for help on using the repository browser.