source: MondoRescue/branches/stable/mindi-busybox/networking/Config.in @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 13 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 19.5 KB
Line 
1#
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
4#
5
6menu "Networking Utilities"
7
8config FEATURE_IPV6
9    bool "Enable IPv6 support"
10    default n
11    help
12      Enable IPv6 support in busybox.
13      This adds IPv6 support in the networking applets.
14
15config VERBOSE_RESOLUTION_ERRORS
16    bool "Verbose resolution errors"
17    default n
18    help
19      Enable if you are not satisfied with simplistic
20      "can't resolve 'hostname.com'" and want to know more.
21      This may increase size of your executable a bit.
22
23config ARP
24    bool "arp"
25    default n
26    help
27      Manipulate the system ARP cache.
28
29config ARPING
30    bool "arping"
31    default n
32    help
33      Ping hosts by ARP packets.
34
35config DNSD
36    bool "dnsd"
37    default n
38    help
39      Small and static DNS server daemon.
40
41config ETHER_WAKE
42    bool "ether-wake"
43    default n
44    help
45      Send a magic packet to wake up sleeping machines.
46
47config FAKEIDENTD
48    bool "fakeidentd"
49    default n
50    select FEATURE_SYSLOG
51    help
52      fakeidentd listens on the ident port and returns a predefined
53      fake value on any query.
54
55config FTPGET
56    bool "ftpget"
57    default n
58    help
59      Retrieve a remote file via FTP.
60
61config FTPPUT
62    bool "ftpput"
63    default n
64    help
65      Store a remote file via FTP.
66
67config FEATURE_FTPGETPUT_LONG_OPTIONS
68    bool "Enable long options in ftpget/ftpput"
69    default n
70    depends on GETOPT_LONG && (FTPGET || FTPPUT)
71    help
72      Support long options for the ftpget/ftpput applet.
73
74config HOSTNAME
75    bool "hostname"
76    default n
77    help
78      Show or set the system's host name.
79
80config HTTPD
81    bool "httpd"
82    default n
83    help
84      Serve web pages via an HTTP server.
85
86config FEATURE_HTTPD_USE_SENDFILE
87    bool "Use sendfile system call"
88    default n
89    depends on HTTPD
90    help
91      When enabled, httpd will use the kernel sendfile() function
92      instead of read/write loop.
93
94config FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
95    bool "Support reloading the global config file using hup signal"
96    default n
97    depends on HTTPD
98    help
99      This option enables processing of SIGHUP to reload cached
100      configuration settings.
101
102config FEATURE_HTTPD_SETUID
103    bool "Enable -u <user> option"
104    default n
105    depends on HTTPD
106    help
107      This option allows the server to run as a specific user
108      rather than defaulting to the user that starts the server.
109      Use of this option requires special privileges to change to a
110      different user.
111
112config FEATURE_HTTPD_BASIC_AUTH
113    bool "Enable Basic http Authentication"
114    default y
115    depends on HTTPD
116    help
117      Utilizes password settings from /etc/httpd.conf for basic
118      authentication on a per url basis.
119
120config FEATURE_HTTPD_AUTH_MD5
121    bool "Support MD5 crypted passwords for http Authentication"
122    default n
123    depends on FEATURE_HTTPD_BASIC_AUTH
124    help
125      Enables basic per URL authentication from /etc/httpd.conf
126      using md5 passwords.
127
128config FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
129    bool "Support loading additional MIME types at run-time"
130    default n
131    depends on HTTPD
132    help
133      This option enables support for additional MIME types at
134      run-time to be specified in the configuration file.
135
136config FEATURE_HTTPD_CGI
137    bool "Support Common Gateway Interface (CGI)"
138    default y
139    depends on HTTPD
140    help
141      This option allows scripts and executables to be invoked
142      when specific URLs are requested.
143
144config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
145    bool "Enable support for running scripts through an interpreter"
146    default n
147    depends on FEATURE_HTTPD_CGI
148    help
149      This option enables support for running scripts through an
150      interpreter. Turn this on if you want PHP scripts to work
151      properly. You need to supply an additional line in your httpd
152      config file:
153      *.php:/path/to/your/php
154
155config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
156    bool "Support the REMOTE_PORT environment variable for CGI"
157    default n
158    depends on FEATURE_HTTPD_CGI
159    help
160      Use of this option can assist scripts in generating
161      references that contain a unique port number.
162
163config FEATURE_HTTPD_ENCODE_URL_STR
164    bool "Enable the -e option for shell script CGI simplification."
165    default y
166    depends on HTTPD
167    help
168      This option allows html encoding arbitrary
169      strings for display of the browser.  Output goes to stdout.
170      For example, httpd -e "<Hello World>" as
171      "&#60Hello&#32World&#62".
172
173config FEATURE_HTTPD_ERROR_PAGES
174    bool "Enable support for custom error pages"
175    default n
176    depends on HTTPD
177    help
178      This option allows you to define custom error pages in
179      the configuration file instead of the default HTTP status
180      error pages. For instance, if you add the line:
181            E404:/path/e404.html
182      in the config file, the server will respond the specified
183      '/path/e404.html' file instead of the terse '404 NOT FOUND'
184      message.
185
186config IFCONFIG
187    bool "ifconfig"
188    default n
189    help
190      Ifconfig is used to configure the kernel-resident network interfaces.
191
192config FEATURE_IFCONFIG_STATUS
193    bool "Enable status reporting output (+7k)"
194    default y
195    depends on IFCONFIG
196    help
197      If ifconfig is called with no arguments it will display the status
198      of the currently active interfaces.
199
200config FEATURE_IFCONFIG_SLIP
201    bool "Enable slip-specific options \"keepalive\" and \"outfill\""
202    default n
203    depends on IFCONFIG
204    help
205      Allow "keepalive" and "outfill" support for SLIP.  If you're not
206      planning on using serial lines, leave this unchecked.
207
208config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
209    bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
210    default n
211    depends on IFCONFIG
212    help
213      Allow the start address for shared memory, start address for I/O,
214      and/or the interrupt line used by the specified device.
215
216config FEATURE_IFCONFIG_HW
217    bool "Enable option \"hw\" (ether only)"
218    default y
219    depends on IFCONFIG
220    help
221      Set the hardware address of this interface, if the device driver
222      supports  this  operation.  Currently, we only support the 'ether'
223      class.
224
225config FEATURE_IFCONFIG_BROADCAST_PLUS
226    bool "Set the broadcast automatically"
227    default n
228    depends on IFCONFIG
229    help
230      Setting this will make ifconfig attempt to find the broadcast
231      automatically if the value '+' is used.
232
233config IFUPDOWN
234    bool "ifupdown"
235    default n
236    help
237      Activate or deactivate the specified interfaces.  This applet makes
238      use of either "ifconfig" and "route" or the "ip" command to actually
239      configure network interfaces.  Therefore, you will probably also want
240      to enable either IFCONFIG and ROUTE, or enable
241      FEATURE_IFUPDOWN_IP and the various IP options.  Of
242      course you could use non-busybox versions of these programs, so
243      against my better judgement (since this will surely result in plenty
244      of support questions on the mailing list), I do not force you to
245      enable these additional options.  It is up to you to supply either
246      "ifconfig", "route" and "run-parts" or the "ip" command, either
247      via busybox or via standalone utilities.
248
249config IFUPDOWN_IFSTATE_PATH
250    string "Absolute path to ifstate file"
251    default "/var/run/ifstate"
252    help
253      ifupdown keeps state information in a file called ifstate.
254      Typically it is located in /var/run/ifstate, however
255      some distributions tend to put it in other places
256      (debian, for example, uses /etc/network/run/ifstate).
257      This config option defines location of ifstate.
258
259config FEATURE_IFUPDOWN_IP
260    bool "Use ip applet"
261    default n
262    depends on IFUPDOWN
263    help
264      Use the iproute "ip" command to implement "ifup" and "ifdown", rather
265      than the default of using the older 'ifconfig' and 'route' utilities.
266
267config FEATURE_IFUPDOWN_IP_BUILTIN
268    bool "Use busybox ip applet"
269    default y
270    depends on FEATURE_IFUPDOWN_IP
271    select IP
272    select FEATURE_IP_ADDRESS
273    select FEATURE_IP_LINK
274    select FEATURE_IP_ROUTE
275    help
276      Use the busybox iproute "ip" applet to implement "ifupdown".
277
278      If left disabled, you must install the full-blown iproute2
279      utility or the  "ifup" and "ifdown" applets will not work.
280
281config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
282    bool "Use busybox ifconfig and route applets"
283    default y
284    depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
285    select IFCONFIG
286    select ROUTE
287    help
288      Use the busybox iproute "ifconfig" and "route" applets to
289      implement the "ifup" and "ifdown" utilities.
290
291      If left disabled, you must install the full-blown ifconfig
292      and route utilities, or the  "ifup" and "ifdown" applets will not
293      work.
294
295config FEATURE_IFUPDOWN_IPV4
296    bool "Enable support for IPv4"
297    default y
298    depends on IFUPDOWN
299    help
300      If you want ifup/ifdown to talk IPv4, leave this on.
301
302config FEATURE_IFUPDOWN_IPV6
303    bool "Enable support for IPv6"
304    default n
305    depends on IFUPDOWN && FEATURE_IPV6
306    help
307      If you need support for IPv6, turn this option on.
308
309### UNUSED
310### config FEATURE_IFUPDOWN_IPX
311###     bool "Enable support for IPX"
312###     default n
313###     depends on IFUPDOWN
314###     help
315###       If this option is selected you can use busybox to work with IPX
316###       networks.
317
318config FEATURE_IFUPDOWN_MAPPING
319    bool "Enable mapping support"
320    default n
321    depends on IFUPDOWN
322    help
323      This enables support for the "mapping" stanza, unless you have
324      a weird network setup you don't need it.
325
326config FEATURE_IFUPDOWN_EXTERNAL_DHCP
327    bool "Enable support for external dhcp clients"
328    default n
329    depends on IFUPDOWN
330    help
331      This enables support for the external dhcp clients. Clients are
332      tried in the following order: dhcpcd, dhclient, pump and udhcpc.
333      Otherwise, if udhcpc applet is enabled, it is used.
334      Otherwise, ifup/ifdown will have no support for DHCP.
335
336config INETD
337    bool "inetd"
338    default n
339    select FEATURE_SYSLOG
340    help
341      Internet superserver daemon
342
343config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
344    bool "Support echo service"
345    default y
346    depends on INETD
347    help
348      Echo received data internal inetd service
349
350config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
351    bool "Support discard service"
352    default y
353    depends on INETD
354    help
355      Internet /dev/null internal inetd service
356
357config FEATURE_INETD_SUPPORT_BUILTIN_TIME
358    bool "Support time service"
359    default y
360    depends on INETD
361    help
362      Return 32 bit time since 1900 internal inetd service
363
364config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
365    bool "Support daytime service"
366    default y
367    depends on INETD
368    help
369      Return human-readable time internal inetd service
370
371config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
372    bool "Support chargen service"
373    default y
374    depends on INETD
375    help
376      Familiar character generator internal inetd service
377
378config FEATURE_INETD_RPC
379    bool "Support RPC services"
380    default n
381    depends on INETD
382    select FEATURE_HAVE_RPC
383    help
384      Support Sun-RPC based services
385
386config IP
387    bool "ip"
388    default n
389    help
390      The "ip" applet is a TCP/IP interface configuration and routing
391      utility.  You generally don't need "ip" to use busybox with
392      TCP/IP.
393
394config FEATURE_IP_ADDRESS
395    bool "ip address"
396    default y
397    depends on IP
398    help
399      Address manipulation support for the "ip" applet.
400
401config FEATURE_IP_LINK
402    bool "ip link"
403    default y
404    depends on IP
405    help
406      Configure network devices with "ip".
407
408config FEATURE_IP_ROUTE
409    bool "ip route"
410    default y
411    depends on IP
412    help
413      Add support for routing table management to "ip".
414
415config FEATURE_IP_TUNNEL
416    bool "ip tunnel"
417    default n
418    depends on IP
419    help
420      Add support for tunneling commands to "ip".
421
422config FEATURE_IP_RULE
423    bool "ip rule"
424    default n
425    depends on IP
426    help
427      Add support for rule commands to "ip".
428
429config FEATURE_IP_SHORT_FORMS
430    bool "Support short forms of ip commands."
431    default n
432    depends on IP
433    help
434      Also support short-form of ip <OBJECT> commands:
435      ip addr   -> ipaddr
436      ip link   -> iplink
437      ip route  -> iproute
438      ip tunnel -> iptunnel
439      ip rule   -> iprule
440
441      Say N unless you desparately need the short form of the ip
442      object commands.
443
444config IPADDR
445    bool
446    default y
447    depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS
448
449config IPLINK
450    bool
451    default y
452    depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK
453
454config IPROUTE
455    bool
456    default y
457    depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE
458
459config IPTUNNEL
460    bool
461    default y
462    depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL
463
464config IPRULE
465    bool
466    default y
467    depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE
468
469config IPCALC
470    bool "ipcalc"
471    default n
472    help
473      ipcalc takes an IP address and netmask and calculates the
474      resulting broadcast, network, and host range.
475
476config FEATURE_IPCALC_FANCY
477    bool "Fancy IPCALC, more options, adds 1 kbyte"
478    default y
479    depends on IPCALC
480    help
481      Adds the options hostname, prefix and silent to the output of "ipcalc".
482
483config FEATURE_IPCALC_LONG_OPTIONS
484    bool "Enable long options"
485    default n
486    depends on IPCALC && GETOPT_LONG
487    help
488      Support long options for the ipcalc applet.
489
490config NAMEIF
491    bool "nameif"
492    default n
493    select FEATURE_SYSLOG
494    help
495      nameif is used to rename network interface by its MAC address.
496      Renamed interfaces MUST be in the down state.
497      It is possible to use a file (default: /etc/mactab)
498      with list of new interface names and MACs.
499      Maximum interface name length: IF_NAMESIZE = 16
500      File fields are separated by space or tab.
501      File format:
502      # Comment
503      new_interface_name    XX:XX:XX:XX:XX:XX
504
505config NC
506    bool "nc"
507    default n
508    help
509      A simple Unix utility which reads and writes data across network
510      connections.
511
512config NC_SERVER
513    bool "Netcat server options (-l)"
514    default n
515    depends on NC
516    help
517      Allow netcat to act as a server.
518
519config NC_EXTRA
520    bool "Netcat extensions (-eiw and filename)"
521    default n
522    depends on NC
523    help
524      Add -e (support for executing the rest of the command line after
525      making or receiving a successful connection), -i (delay interval for
526      lines sent), -w (timeout for initial connection).
527
528config NETSTAT
529    bool "netstat"
530    default n
531    help
532      netstat prints information about the Linux networking subsystem.
533
534config FEATURE_NETSTAT_WIDE
535    bool "  Enable wide netstat output"
536    default n
537    depends on NETSTAT
538    help
539      Add support for wide columns. Useful when displaying IPv6 addresses
540      (-W option).
541
542config NSLOOKUP
543    bool "nslookup"
544    default n
545    help
546      nslookup is a tool to query Internet name servers.
547
548config PING
549    bool "ping"
550    default n
551    help
552      ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
553      elicit an ICMP ECHO_RESPONSE from a host or gateway.
554
555config PING6
556    bool "ping6"
557    default n
558    depends on FEATURE_IPV6 && PING
559    help
560      This will give you a ping that can talk IPv6.
561
562config PSCAN
563    bool "pscan"
564    default n
565    help
566      Simple network port scanner.
567
568config FEATURE_FANCY_PING
569    bool "Enable fancy ping output"
570    default y
571    depends on PING
572    help
573      Make the output from the ping applet include statistics, and at the
574      same time provide full support for ICMP packets.
575
576config ROUTE
577    bool "route"
578    default n
579    help
580      Route displays or manipulates the kernel's IP routing tables.
581
582config SLATTACH
583    bool "slattach"
584    default n
585    help
586      slattach is a small utility to attach network interfaces to serial lines.
587
588config TELNET
589    bool "telnet"
590    default n
591    help
592      Telnet is an interface to the TELNET protocol, but is also commonly
593      used to test other simple protocols.
594
595config FEATURE_TELNET_TTYPE
596    bool "Pass TERM type to remote host"
597    default y
598    depends on TELNET
599    help
600      Setting this option will forward the TERM environment variable to the
601      remote host you are connecting to.  This is useful to make sure that
602      things like ANSI colors and other control sequences behave.
603
604config FEATURE_TELNET_AUTOLOGIN
605    bool "Pass USER type to remote host"
606    default y
607    depends on TELNET
608    help
609      Setting this option will forward the USER environment variable to the
610      remote host you are connecting to. This is useful when you need to
611      log into a machine without telling the username (autologin). This
612      option enables `-a' and `-l USER' arguments.
613
614config TELNETD
615    bool "telnetd"
616    default n
617    select FEATURE_SYSLOG
618    help
619      A daemon for the TELNET protocol, allowing you to log onto the host
620      running the daemon.  Please keep in mind that the TELNET protocol
621      sends passwords in plain text.  If you can't afford the space for an
622      SSH daemon and you trust your network, you may say 'y' here.  As a
623      more secure alternative, you should seriously consider installing the
624      very small Dropbear SSH daemon instead:
625        http://matt.ucc.asn.au/dropbear/dropbear.html
626
627      Note that for busybox telnetd to work you need several things:
628      First of all, your kernel needs:
629          UNIX98_PTYS=y
630          DEVPTS_FS=y
631
632      Next, you need a /dev/pts directory on your root filesystem:
633
634          $ ls -ld /dev/pts
635          drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
636
637      Next you need the pseudo terminal master multiplexer /dev/ptmx:
638
639          $ ls -la /dev/ptmx
640          crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
641
642      Any /dev/ttyp[0-9]* files you may have can be removed.
643      Next, you need to mount the devpts filesystem on /dev/pts using:
644
645          mount -t devpts devpts /dev/pts
646
647      You need to be sure that Busybox has LOGIN and
648      FEATURE_SUID enabled.  And finally, you should make
649      certain that Busybox has been installed setuid root:
650
651        chown root.root /bin/busybox
652        chmod 4755 /bin/busybox
653
654      with all that done, telnetd _should_ work....
655
656
657config FEATURE_TELNETD_STANDALONE
658    bool "Support standalone telnetd (not inetd only)"
659    default n
660    depends on TELNETD
661    help
662      Selecting this will make telnetd able to run standalone.
663
664config TFTP
665    bool "tftp"
666    default n
667    help
668      This enables the Trivial File Transfer Protocol client program.  TFTP
669      is usually used for simple, small transfers such as a root image
670      for a network-enabled bootloader.
671
672config FEATURE_TFTP_GET
673    bool "Enable \"get\" command"
674    default y
675    depends on TFTP
676    help
677      Add support for the GET command within the TFTP client.  This allows
678      a client to retrieve a file from a TFTP server.
679
680config FEATURE_TFTP_PUT
681    bool "Enable \"put\" command"
682    default y
683    depends on TFTP
684    help
685      Add support for the PUT command within the TFTP client.  This allows
686      a client to transfer a file to a TFTP server.
687
688config FEATURE_TFTP_BLOCKSIZE
689    bool "Enable \"blocksize\" command"
690    default n
691    depends on TFTP
692    help
693      Allow the client to specify the desired block size for transfers.
694
695config DEBUG_TFTP
696    bool "Enable debug"
697    default n
698    depends on TFTP
699    help
700      Enable debug settings for tftp.  This is useful if you're running
701      into problems with tftp as the protocol doesn't help you much when
702      you run into problems.
703
704config TRACEROUTE
705    bool "traceroute"
706    default n
707    help
708      Utility to trace the route of IP packets
709
710config FEATURE_TRACEROUTE_VERBOSE
711    bool "Enable verbose output"
712    default n
713    depends on TRACEROUTE
714    help
715      Add some verbosity to traceroute.  This includes amongst other things
716      hostnames and ICMP response types.
717
718config FEATURE_TRACEROUTE_SOURCE_ROUTE
719    bool "Enable loose source route"
720    default n
721    depends on TRACEROUTE
722    help
723      Add option to specify a loose source route gateway
724      (8 maximum).
725
726config FEATURE_TRACEROUTE_USE_ICMP
727    bool "Use ICMP instead of UDP"
728    default n
729    depends on TRACEROUTE
730    help
731      Add feature to allow for ICMP ECHO instead of UDP datagrams.
732
733source networking/udhcp/Config.in
734
735config VCONFIG
736    bool "vconfig"
737    default n
738    help
739      Creates, removes, and configures VLAN interfaces
740
741config WGET
742    bool "wget"
743    default n
744    help
745      wget is a utility for non-interactive download of files from HTTP,
746      HTTPS, and FTP servers.
747
748config FEATURE_WGET_STATUSBAR
749    bool "Enable a nifty process meter (+2k)"
750    default y
751    depends on WGET
752    help
753      Enable the transfer progress bar for wget transfers.
754
755config FEATURE_WGET_AUTHENTICATION
756    bool "Enable HTTP authentication"
757    default y
758    depends on WGET
759    help
760      Support authenticated HTTP transfers.
761
762config FEATURE_WGET_LONG_OPTIONS
763    bool "Enable long options"
764    default n
765    depends on WGET && GETOPT_LONG
766    help
767      Support long options for the wget applet.
768
769config ZCIP
770    bool "zcip"
771    default n
772    select FEATURE_SYSLOG
773    help
774      ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
775      It's a daemon that allocates and defends a dynamically assigned
776      address on the 169.254/16 network, requiring no system administrator.
777
778      See http://www.zeroconf.org for further details, and "zcip.script"
779      in the busybox examples.
780
781endmenu
Note: See TracBrowser for help on using the repository browser.