Context Navigation

source: MondoRescue/branches/3.3/mindi/mindi@ 3740

Visit:

Last change on this file since 3740 was 3740, checked in by Bruno Cornec, 4 years ago
Avoid recursing for btrfs subvol creating as already using option -p for mkdir
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 131.3 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 3740 2019-11-18 01:41:32Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-image boot/root kit. The first image is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17	KERVERRUN=`/bin/uname -r`
18	# By default we use the running kernel as a reference
19	KERVER=$KERVERRUN
20
21	# In case of problem with udev you can try to add udevdebug
22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23	MINDI_DEFAULT_BOOT_OPTION="interactive"
24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25	# So this parameter only applies to non CD recovery.
26	MINDI_BOOT_TIMEOUT="300"
27
28	MINDI_REV=PBREV
29	MINDI_VER=PBVER
30
31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32	MINDI_PREFIX=XXX
33	MINDI_CONF=YYY
34	MINDI_SBIN=${MINDI_PREFIX}/sbin
35	MINDI_LIB=LLL
36	MINDI_CACHE=/var/cache/mindi
37
38	MRCFG=mondorestore.cfg
39
40	# Temporary directory for mindi
41	TMPDIR=${TMPDIR:=/tmp}
42	if [ ! -d $TMPDIR ]; then
43	mkdir -p $TMPDIR
44	fi
45
46	EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
47
48	PROMPT_MAKE_CD_IMAGE="yes"
49	# Ask if you want to make a CD Image to be written?
50	# if this is set to 'no' in the conf file, then the image will be created automatically
51
52	PROMPT_MAKE_USB_IMAGE="yes"
53	# Ask if you want to make a USB Image to be written?
54	# if this is set to 'no' in the conf file, then the image will be created automatically
55
56	USE_OWN_KERNEL="yes"
57	# If set to "no", you will be prompted for whether or not
58	# you want to use your own kernel, or the supplied default.
59	# If "yes" mindi will automatically use your own kernel.
60
61	KERNEL_IS_XEN="no"
62	# If set to "no", the kernel is not a Xen kernel
63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64	xenkernelpath=""
65
66	MY_FSTAB=/etc/fstab
67	TAPE_MODS="ht st osst ide-tape ide_tape"
68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70	# ide-probe-mod
71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd xhci-pci usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial cdc_eem"
74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb i40e dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
76	# Replace with that line for HP OCMP e.g.
77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78	DENY_MODS="kqemu vxfen"
79	# Force some modules to be included
80	FORCE_MODS=""
81
82	LOGFILE=/var/log/mindi.log
83	BOOT_MEDIA_MESSAGE="\
84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88	\n\
89	You may add one or more parameters as well as per the function keys below\n\
90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91	\n\
92	If restoring from a local external disk or USB key, do not connect it \n\
93	until the boot-up has finished.\n\
94	\n\
95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
96	"
97	FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99	# Using a config file allow to overwrite some values
100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101	if [ -f $MINDI_CONFIG ]; then
102	. $MINDI_CONFIG
103	fi
104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107	# Debian 8 system e.g. use xorriso for UEFI support.
108	# However, they use exactly the same command line parameters as mkisofs, so just
109	# use it if it's available.
110	ISO_CMD="/usr/bin/xorriso"
111
112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
113	# However, they use exactly the same command line parameters as mkisofs, so just
114	# use it if it's available.
115	if [ ! -x $ISO_CMD ]; then
116	ISO_CMD="/usr/bin/genisoimage"
117	# For compatibility with previous versions default to mkisofs
118	if [ ! -x $ISO_CMD ]; then
119	ISO_CMD="/usr/bin/mkisofs"
120	fi
121	if [ ! -x $ISO_CMD ]; then
122	LogFile "NOTE: No CD image (ISO file) utility found"
123	ISO_CMD = ""
124	fi
125	else
126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
127	fi
128
129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
130
131	# Mindi set this as default in case it's invoked alone
132	BOOT_TYPE="BIOS"
133	# and we also check whether we're UEFI or not.
134	if [ -d "/sys/firmware/efi" ]; then
135	BOOT_TYPE="UEFI"
136	else
137	# Find MBR in case of bootable USB device to build
138	MBRFILE=/usr/lib/syslinux/mbr.bin
139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143	fi
144
145	# Function to log on screen only
146	LogScreen() {
147	if [ -e /dev/stderr ] ; then
148	echo -e "$1" >> /dev/stderr
149	elif [ -e /usr/bin/logger ] ; then
150	/usr/bin/logger -s $1
151	fi
152	}
153
154	# Function to log in log file only
155	LogFile() {
156
157	echo -e "$1" >> $LOGFILE
158	if [ _"$2" != _"" ]; then
159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160	rm -f "$2"
161	fi
162	}
163
164	# Function to log in both screen and logfile
165	LogAll() {
166	LogScreen "$1"
167	LogFile "$1" "$2"
168	}
169
170	# Last function called before exiting
171	# Parameter is exit code value
172	# Should be declared here as used immediately below potentialy
173	MindiExit() {
174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
175	LogFile "INFO: End date : `date`"
176	if [ _"$MONDO_SHARE" != _"" ] ; then
177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178	if [ -f $LOGFILE ]; then
179	cat $LOGFILE >> /var/log/mondoarchive.log
180	else
181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
182	fi
183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184	fi
185
186	cd /
187	sync&
188
189	# Clean temporary files only when standalone mindi
190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191	rm -Rf $MINDI_TMP
192	fi
193	exit $1
194	}
195
196	Die() {
197	if [ "$1" = "" ] ; then
198	LogAll "FATAL ERROR"
199	else
200	LogAll "FATAL ERROR. $1"
201	fi
202	if [ _"$2" != _"" ]; then
203	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
204	fi
205	rm -f "$2"
206
207	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
208	LogAll "See http://www.mondorescue.org for more information."
209	LogAll "WE CANNOT HELP unless you enclose that file.\n"
210	MindiExit -1
211	}
212
213	# Now we can create what we need
214	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
215	if [ $? -ne 0 ]; then
216	df $TMPDIR
217	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
218	fi
219	if [ _"$MINDI_TMP" = _"" ]; then
220	Die "MINDI_TMP is empty, aborting"
221	fi
222	if [ _"$MINDI_TMP" = _"/" ]; then
223	Die "MINDI_TMP is /, aborting"
224	fi
225	export MINDI_TMP
226
227	# ----------------------------------------------------------------------------
228
229
230	AbortHere() {
231	Die "Program is terminating in response to signal received from OS/user"
232	}
233
234
235	Aborted() {
236	trap SIGHUP SIGTERM SIGTRAP SIGINT
237	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
238	Die "User abort."
239	}
240
241
242	AddFileToCfgIfExists() {
243	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
244	}
245
246
247	AddKeyboardMappingFile() {
248	local mappath r included_list included_item i res ii sss
249	mappath=$1
250	KBDEPTH=$(($KBDEPTH+1))
251	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
252	if [ -e "$bigdir/$mappath" ] ; then
253	LogFile "INFO: $mappath already added"
254	return
255	elif [ -d "$bigdir/$mappath" ] ; then
256	echo "Cannot add $mappath: it's a directory. Sorry."
257	return
258	fi
259	LogFile "INFO: Added kbd map $mappath"
260	if [ ! -e "$mappath" ] ; then
261	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
262	if [ ! -e "$mappath" ] ; then
263	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
264	return
265	fi
266	fi
267
268	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
269	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
270	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
271	else
272	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
273	fi
274	for included_item in $included_list ; do
275	if [ ! -e "$included_item" ] ; then
276	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
277	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
278	for ii in $sss ; do
279	[ -e "$ii" ] && AddKeyboardMappingFile $ii
280	done
281	else
282	AddKeyboardMappingFile $included_item
283	fi
284	done
285	}
286
287
288	CopyDependenciesToDirectory() {
289	local outdir incoming counter d found tdir templog
290	outdir=$1
291	templog=$MINDI_TMP/$$.log
292	mkdir -p $outdir
293	incoming=`ReadLine`
294	counter=$3
295	> $templog
296
297	while [ "$incoming" != "" ] ; do
298	if [ "$3" = "1" ]; then
299	counter=$(($counter+1))
300	LogProgress $counter $2
301	fi
302	# Non absolute file names should not arrive till here => skipped
303	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
304	LogAll "WARNING: Unable to handle $incoming"
305	incoming=`ReadLine`
306	continue
307	fi
308	# no parent directory of incoming should be a link, copy is not possible in that case
309	d=`dirname "$incoming"`
310	found="false"
311	while [ $d != "/" -a $found = "false" ]; do
312	[ -h "$d" ] && found="true"
313	d=`dirname "$d"`
314	done
315	if [ -d "$incoming" -a ! -h "$incoming" ]; then
316	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
317	elif [ -e "$incoming" ] && [ $found = "false" ]; then
318	if [ ! -h "$incoming" ]; then
319	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
320	else
321	tdir=`dirname "$incoming"`
322	if [ ! -e "$outdir/$tdir" ]; then
323	mkdir -p "$outdir/$tdir"
324	fi
325	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
326	fi
327	# Only uncompress modules if not using udevd
328	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
329	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
330	fi
331	[ -x "$outdir" ] && StripExecutable $outdir
332	fi
333	incoming=`ReadLine`
334	done
335	}
336
337
338	CountItemsIn() {
339	local r
340	r=0
341	for q in $1 ; do
342	r=$(($r+1))
343	done
344	echo $r
345	}
346
347
348	DropOptimizedLibraries() {
349	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
350	filelist=$1
351	outdir=$2
352
353	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
354	if [ "$list_of_optimized_libraries" = "" ] ; then
355	return 0
356	fi
357	echo -en "Dropping i686-optimized libraries if appropriate"
358	for optimized_lib_name in $list_of_optimized_libraries ; do
359	echo -en "."
360	reason=""
361	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
362	echo "$vanilla_lib_name" >> $filelist
363	LogFile "INFO: Adding $vanilla_lib_name to filelist"
364	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
365	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
366
367	# This may return multiple files
368	for resolved in `mr-read-all-link $vanilla_lib_name`; do
369	LogFile "INFO: Adding as deps $resolved to filelist"
370	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
371	if [ "$vanilla_resolved_name" != "$resolved" ]; then
372	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
373	rmdir $outdir$resolved > /dev/null 2> /dev/null
374	ln -sf $vanilla_resolved_name $outdir$resolved
375	LogFile "INFO: Excluding deps $resolved"
376	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
377	LogFile "INFO: Replacing it with $vanilla_resolved_name"
378	echo "$vanilla_resolved_name" >> $filelist.tmp
379	mv -f $filelist.tmp $filelist
380	fi
381	done
382	done
383	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
384	mv -f $filelist.tmp $filelist
385	echo -e "$DONE"
386	}
387
388
389	FindAndAddUserKeyboardMappingFile() {
390	local r res mapfile mappath included_item included_list keyfile mp locale
391	LogAll "INFO: Analyzing your keyboard's configuration."
392	KEYDIR=/usr/lib/kbd
393	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
394	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
395	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
396	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
397	if [ ! -e "$KEYDIR" ] ; then
398	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
399	return 0
400	else
401	LogFile "INFO: KEYDIR=$KEYDIR"
402	fi
403	if [ -e "/etc/sysconfig/keyboard" ] ; then
404	LogFile "INFO: Red Hat-style config detected."
405	keyfile=/etc/sysconfig/keyboard
406	elif [ -e "/etc/vconsole.conf" ] ; then
407	LogFile "INFO: New Fedora style config detected."
408	keyfile=/etc/vconsole.conf
409	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
410	LogFile "INFO: Slackware-style config detected."
411	keyfile=/etc/rc.d/rc.keymap
412	elif [ -e "/etc/rc.config" ] ; then
413	LogFile "INFO: Debian-style config detected."
414	keyfile=/etc/rc.config
415	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
416	LogFile "INFO: Debian-style config detected."
417	mkdir -p $bigdir/tmp
418	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
419	KBDEPTH=0
420	mkdir -p $bigdir/etc/console
421	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
422	echo ""
423	echo -e "$DONE"
424	return 0
425	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
426	LogFile "INFO: Ubuntu-style config detected."
427	mkdir -p $bigdir/tmp
428	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
429	kbdfile="/etc/console-setup/boottime.kmap.gz"
430	else
431	kbdfile="/etc/console-setup/cached.kmap.gz"
432	fi
433	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
434	KBDEPTH=0
435	mkdir -p $bigdir/etc/console-setup
436	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
437	echo ""
438	echo -e "$DONE"
439	return 0
440	elif [ -e "/etc/default/keyboard" ]; then
441	LogFile "INFO: New Debian-style config detected."
442	keyfile=/etc/default/keyboard
443	elif [ -e "/etc/rc.conf" ] ; then
444	LogFile "INFO: ArchLinux config detected."
445	keyfile=/etc/rc.conf
446	elif [ -e "/etc/conf.d/keymaps" ] ; then
447	LogFile "INFO: Gentoo-style config detected."
448	keyfile=/etc/conf.d/keymaps
449	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
450	LogFile "INFO: X11-style config detected."
451	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
452	else
453	LogFile "Searching for rc.config ..."
454	keyfile=`find /etc -name rc.config \| head -n1`
455	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
456	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
457	return
458	else
459	LogFile "INFO: Found $keyfile"
460	fi
461	fi
462	if [ ! -e "$KEYDIR/keymaps" ] ; then
463	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
464	return
465	fi
466	LogFile "INFO: keyfile=$keyfile"
467	# For SLES we need to remove the .map.gz extension Cf #614
468	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
469	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
470	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
471	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
472	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
473	LogFile "INFO: locale=$locale"
474	#
475	# Process the keymaps dir once for all
476	# AddKeyboardMappingFile will use it recursively
477	#
478	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
479	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
480	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
481	# For new distro such as RHEL 7 we need that additional search
482	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
483	# If we have multiple keymaps then log it !!
484	echo "$mp" \| grep -q " " >> $LOGFILE
485	if [ $? -eq 0 ]; then
486	LogAll "WARNING: Multiple keymaps found: $mp"
487	LogFile "INFO: The following one will be used"
488	fi
489	for i in $mp ; do
490	mappath=$i
491	[ -e "$i" ] && [ ! -d "$i" ] && break
492	done
493	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
494	mappath=$(find /usr /lib /lib64 -path "/kbd/keymaps//$locale \| head -1")
495	fi
496	LogFile "INFO: mappath = $mappath"
497	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
498	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
499	return
500	fi
501	echo -en "INFO: Adding keyboard mapping tables"
502	mkdir -p $bigdir/tmp
503	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
504	KBDEPTH=0
505	AddKeyboardMappingFile $mappath
506	echo -e "$DONE"
507	rm -f $MINDI_TMP/keymaps.find
508	return 0
509	}
510
511
512	FindLdlinux32Binary() {
513	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
519	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
520	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
521	if [ ! -e "$LDLINUXC32" ]; then
522	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
523	LDLINUXC32=/tmp/itdoesntexist
524	else
525	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
526	fi
527	}
528
529
530	FindMboot32Binary() {
531	MBOOTC32=/usr/lib/syslinux/mboot.c32
532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
537	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
538	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
539	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
540	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
541	}
542
543	FindLdlinuxe64Binary() {
544	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
550	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
551	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
552	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
553	}
554
555	FindSyslinux64EFI() {
556	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
562	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
563	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
564	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
565	}
566
567	FindIsolinuxBinary() {
568	ISOLINUX=/usr/lib/isolinux.bin
569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
574	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
575	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
576	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
577	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
578	}
579
580
581	GenerateGiantDependencyList() {
582	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
583
584	echo -en "INFO: Analyzing dependency requirements"
585	outfile=$1
586	tempfile=$MINDI_TMP/$$.txt
587	incoming=`ReadLine`
588
589	> $tempfile
590	progress=0
591	res=0
592	noof_lines=$2
593	while [ "$incoming" != "" ] ; do
594	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
595	incoming=`ReadLine`
596	continue
597	fi
598	if [ "$incoming" = "LVMFILES:" ] ; then
599	break
600	fi
601	filelist=`GenerateListForFile "$incoming"`
602	r=$?
603	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
604	res=$(($res+$r))
605	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
606	for fname in $filelist ; do
607	[ "$fname" != "" ] && echo "$fname" >> $tempfile
608	done
609	progress=$(($progress+1))
610	LogProgress $progress $noof_lines
611	incoming=`ReadLine`
612	done
613	if [ "$incoming" = "LVMFILES:" ] ; then
614	incoming=`ReadLine`
615	lvmversion=""
616	while [ "$incoming" != "" ] ; do
617	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
618	incoming=`ReadLine`
619	continue
620	fi
621	filelist=`GenerateListForFile "$incoming"`
622	for tool in $filelist ; do
623	lvmresolved=`readlink -f $tool`
624	if [ "$tool" = "$lvmresolved" ]; then
625	echo "$tool" >> $tempfile
626	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
627	if [ "$lvmversion" = "" ] ; then
628	lvmversion=`$lvmresolved`
629	echo "$lvmresolved" >> $tempfile
630	fi
631	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
632	if [ "$lvmversion" = "200" ]; then
633	# pvdata and lvmcreate_initrd don't exist in LVM2
634	case "$toolstripped" in
635	"pvdata")
636	continue
637	;;
638	"lvmcreate_initrd")
639	continue
640	;;
641	esac
642	fi
643	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
644	if [ -e "$toolpath" ] ; then
645	echo "$toolpath" >> $tempfile
646	echo "$tool" >> $tempfile
647	else
648	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
649	fi
650	if [ -e "$toolpath" ] ; then
651	echo "$toolpath" >> $tempfile
652	echo "$tool" >> $tempfile
653	else
654	echo "Where are your LVM-Tools? Couldn't find $tool"
655	fi
656	else
657	echo "$tool" >> $tempfile
658	fi
659	done
660	progress=$(($progress+1))
661	LogProgress $progress $noof_lines
662	incoming=`ReadLine`
663	done
664	fi
665	echo -e "$DONE"
666
667	echo -en "INFO: Making complete dependency list..."
668	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
669	mv -f $tempfile.new $tempfile
670	> $outfile.pre
671	progress=0
672	noof_lines=`cat $tempfile \| wc -l`
673	LogFile "---------------------------------"
674	LogFile "List of dependencies: "
675	LogFile "---------------------------------"
676	for fname in `cat $tempfile` ; do
677	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
678	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
679	progress=$(($progress+1))
680	LogProgress $progress $noof_lines
681	done
682	if [ _"$MONDO_SHARE" != _"" ]; then
683	mkdir -p $bigdir/tmp
684	mkdir -p $bigdir/usr/bin
685	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
686	LogAll "\nINFO: Incorporating post-nuke tarball"
687	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
688	fi
689	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
690	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
691	else
692	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
693	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
694	LogAll " If Mindi was called by Mondo then send a bug report."
695	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
696	LogAll " Finally, run Mindi again."
697	Die "Odd."
698	fi
699	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
700	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
701	LogAll "\nINFO: Incorporating Network-related settings"
702	for r in NETFS-* ; do
703	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
704	LogFile "INFO: Copying $r to ramdisk"
705	done
706	fi
707	fi
708	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
709	rm -f $tempfile $outfile.pre
710	[ "$res" -eq "0" ] && echo -e "$DONE" \|\| echo "\nFailed."
711	return $res
712	}
713
714
715	GenerateListForFile() {
716	local files_found fname incoming
717	incoming="$1"
718	files_found=""
719
720	for fname in $incoming ; do
721	files_found="$files_found `LocateFile $fname`"
722	done
723
724	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
725	}
726
727
728	# Returns all disk devices which are part of a raid array
729	GetAllRaidMembers() {
730	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
731	}
732
733
734	GetFileSizeList() {
735	local i
736	for i in `find $1 -type d -o -print` ; do
737	du -sk $i
738	done
739	}
740
741
742	# Check kernel filesystem capabilites for accessing initrd image
743	# Could be ext2 FS (old mode) or initramfs (new mode)
744	#
745	# Interface definition:
746	# param #1: absolute path to kernel image
747	GetInitrdFilesystemToUse() {
748
749	# interface test: make sure we have one parameter
750	if [ $# -ne 1 ]; then
751	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
752	fi
753
754	# interface parameters
755	local lvKernelImage=$1
756
757	# local constants (filesystem magic strings)
758	local lcMagicCramfs="<3>cramfs: wrong magic"
759	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
760	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
761	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
762
763	# local variables
764	local lvOffset
765	local lvScanRes
766	local lvUseFilesystem
767
768	# say where we are.
769	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
770
771	# verify that file exists
772	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
774	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
775	file $lvKernelImage 2>&1 \| grep -q gzip
776	if [ $? -eq 0 ]; then
777	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
778	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
779	else
780	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
781	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
782	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
783	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
784	if [ $lvOffset -eq 0 ]; then
785	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
786	lvScanRes=$lcMagicInitfs
787	else
788	lvOffset=`expr $lvOffset / 2`
789	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
790	# scan again kernel image
791	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
792	fi
793	fi
794
795	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
796	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
797	lvUseFilesystem="ext2fs"
798	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
799	lvUseFilesystem="ext3fs"
800	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
801	lvUseFilesystem="initramfs"
802	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
803	lvUseFilesystem="cramfs"
804	else
805	# In that case, we are most probably after 2.6.30 and use the supported initramfs
806	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
807	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
808	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
809	lvUseFilesystem="initramfs"
810	fi
811
812	# say what we are using
813	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
814
815	# return file system to use
816	echo "$lvUseFilesystem"
817
818	}
819
820	# Searches members of raid device
821	# $1: raid device (/dev/md...)
822	GetRaidDevMembers() {
823	if [ ! -f /etc/raidtab ]; then
824	return
825	fi
826	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
827	}
828
829
830	ListAllPartitions() {
831	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}' \| sort -u
832	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
833	if [ -e "/vmfs/volumes" ]; then
834	# For VMWare ESX 3 get the device names of these volumes
835	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
836	fi
837	return
838	}
839
840
841	ListKernelModulePaths() {
842	local module_list module fname r kern
843	module_list="$MODULES"
844	# Remove unwanted modules from list
845	for i in $DENY_MODS; do
846	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
847	done
848	###
849	### Sq-Modification ... Use kernelname for module search path if specified
850	###
851	if [ "${kernelname}" != "" ]
852	then
853	kern=${kernelname}
854	else
855	kern="$KERVERRUN"
856	fi
857	export KERVER=$kern
858	###
859	### Sq-Mod End
860	###
861	# Get rid of duplicates
862	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
863	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
864	if [ -z "$r" ]; then
865	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
866	r="[live module file not found]"
867	else
868	r="[extra module file not found]"
869	fi
870	else
871	[ -f "$r" ] && echo "$r"
872	fi
873	LogFile "INFO: module $module --> $r"
874	done
875	find /lib/modules/$kern/modules.* -type f 2> /dev/null
876	}
877
878	#
879	# Critical function which computes all dependencies (dyn. lib.)
880	# for a list of binaries
881	#
882	LocateDeps() {
883	local incoming fname deps
884	incoming="$*"
885	deps=""
886
887	for fname in $incoming ; do
888	if [ ! -e "$fname" ] ; then
889	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
890	if echo $fname \| grep lvm &> /dev/null ; then
891	LogFile " This warning only affects you if you are using LVM."
892	if echo "$MODULES" \| grep lvm &> /dev/null ; then
893	LogFile " I think you are, so please take heed!"
894	else
895	LogFile " I don't think you are, so don't worry about it."
896	fi
897	fi
898	else
899	deps="$deps $fname"
900	fi
901	done
902	mr-read-all-link `mr-process-ldd $deps \| sort -u` $deps \| sort -u
903	}
904
905
906	LocateFile() {
907	local j dn newdn bn path fname_to_find output
908	fname_to_find="$1"
909	# It's an absolute path
910	j=`echo "$fname_to_find" \| cut -c1`
911	if [ _"$j" = _"/" ]; then
912	dn=`dirname $fname_to_find`
913	# We suppose that the link is already included, just add the new file
914	if [ -h "$dn" ]; then
915	newdn=`readlink -f $dn`
916	bn=`basename $fname_to_find`
917	output="$newdn/$bn"
918	else
919	output="$fname_to_find"
920	fi
921	if [ -h "$output" ] ; then
922	output="`mr-read-all-link $output` $output"
923	fi
924	echo "$output"
925	return 0
926	fi
927	# It's not an absolute path
928	output=""
929	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
930	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
931	[ -h "$path" ] && continue
932	[ ! -e "$path/$fname_to_find" ] && continue
933	output="$path/$fname_to_find $output"
934	if [ -h "$path/$fname_to_find" ] ; then
935	output="`mr-read-all-link $path/$fname_to_find` $output"
936	fi
937	done
938	if [ "$output" = "" ] ; then
939	return 1
940	fi
941	echo "$output"
942	return 0
943	}
944
945	LogProgress() {
946	local i progress modres noof_lines title
947
948	progress=$1
949	noof_lines=$2
950	title=$3
951
952	i=$(($progress*100))
953	if [ $noof_lines -ne 0 ]; then
954	i=$(($i/$noof_lines))
955	else
956	i=0
957	fi
958
959	if [ _"$MONDO_SHARE" != _"" ]; then
960	echo "$title $i%"
961	else
962	echo -en "\r\t\t\t\t\t\t\t\t"
963	echo -en "$i"
964	echo -en "%"
965	modres=$(($progress%4))
966	[ "$modres" -eq "0" ] && echo -en "\t/"
967	[ "$modres" -eq "1" ] && echo -en "\t-"
968	[ "$modres" -eq "2" ] && echo -en "\t\\"
969	[ "$modres" -eq "3" ] && echo -en "\t\|"
970	fi
971	}
972
973	# Called by PrepareTargetDir, to make /tmp/$MRCFG
974	MakeMondoConfigFile() {
975	local outfile use_lzo use_comp use_star use_gzip use_lzma
976	outfile=$1
977	> $outfile
978	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
979	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
980	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
981	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
982	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
983	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
984	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
985	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
986	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
987	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
988	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
989	echo "use-lzo $use_lzo" >> $outfile
990	echo "use-gzip $use_gzip" >> $outfile
991	echo "use-star $use_star" >> $outfile
992	echo "use-lzma $use_lzma" >> $outfile
993	echo "use-comp $use_comp" >> $outfile
994	echo "boot-type $BOOT_TYPE" >> $outfile
995	echo "datestamp `date`" >> $outfile
996	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
997	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
998	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
999	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1000	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
1001	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1003	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
1004	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1005	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1006	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1007	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1008	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1009	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
1010
1011	# Deal with network configuration in a portable way
1012	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1013	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1014	if [ $? -ne 0 ]; then
1015	Die "mr-net-get-config didn't execute correctly. Check dependencies, probably the perl Net::IPv4Addr module is missing"
1016	fi
1017	fi
1018	}
1019
1020	# Get PV's for an LV
1021	GetPVsForLV() {
1022	local vg
1023
1024	if [ -n "$1" ]; then
1025	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
1026	if [ -z "$vg" ]; then
1027	return
1028	fi
1029	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
1030	fi
1031	}
1032
1033
1034	MakeMountlist() {
1035	local mountlist all_partitions current_partition \
1036	partition_size partition_format outstring partition_number \
1037	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1038	absolute_partition old_partition_fmt current_lvolume uname skip
1039
1040	LogFile "------------------------------------"
1041	LogFile "INFO: Your raw fstab file looks like this:"
1042	LogFile "------------------------------------"
1043	cat $MY_FSTAB >> $LOGFILE
1044	LogAll "-----------------------------------"
1045	LogAll "INFO: Your mountlist will look like this:"
1046	LogAll "-----------------------------------"
1047
1048	# mountlist(OUT)
1049	mountlist=$1
1050
1051	# NB: partition = device
1052	# NB: mountpt = where the device is mounted
1053
1054	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
1055
1056	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1057	> $mountlist
1058	all_partitions=""
1059
1060	if [ $LVM != "false" ]; then
1061	LogFile "INFO: Analyzing LVM..."
1062	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1063	if [ $? -ne 0 ]; then
1064	LVM="false"
1065	fi
1066	# Excluded LVs and GVs are not reported here
1067	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
1068	fi
1069	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070	for i in $IMAGE_DEVS ; do
1071	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1072	done
1073	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
1074	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
1075	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
1076	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1077	for c_p in $all_partitions ; do
1078	# Skip fd/cd devices, network FS, cifs, brtfs subvols
1079	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
1080	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
1081	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
1082	current_partition=`readlink -f $c_p`
1083	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
1084	current_partition="$c_p"
1085	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
1086	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1087	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1088	fi
1089	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
1090	else
1091	current_partition="$c_p"
1092	fi
1093	[ "$c_p" = "none" ] && continue
1094
1095	redhat_label=""
1096	label=""
1097	uuid=""
1098	absolute_partition=`readlink -f $c_p`
1099	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1100
1101	# set default in case we dont't find it
1102	str_to_find_fmt_with=$current_partition
1103
1104	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1105	# current_partition contains only first column of /etc/fstab
1106	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
1107	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
1108	actual_dev=""
1109
1110	# 1st try, findfs - the RHEL way of finding labels and their partitions
1111	if [ -x "/sbin/findfs" ]; then
1112	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1113	fi
1114
1115	# 2nd try : blkid, the good way for all LABEL except swap
1116	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1117	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
1118	# For LVM FS it will give a /dev/dm-# which should then be converted
1119	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1120	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1121	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1122	for dev in `ls /dev/mapper/*`; do
1123	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1124	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1125	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1126	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1127	break
1128	fi
1129	done
1130	fi
1131	fi
1132
1133	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1134	# For LVM gives a /dev/mapper entry
1135	if [ "x$actual_dev" = "x" ]; then
1136	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
1137	fi
1138
1139	# 4th try, with vol_id
1140	# SWAP only
1141	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1142	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
1143	for dev_swap in $list_swaps ; do
1144	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
1145	if [ "x$dev_exists" != "x" ]; then
1146	actual_dev=$dev_swap
1147	break;
1148	fi
1149	done
1150	fi
1151
1152	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1153	# LABEL=SW-cciss/c0d0p3 (RDP)
1154	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1155	# SWAP only
1156	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1157	skip=""
1158	uname=$KERVERRUN
1159	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
1160	# 2.6.12 needs 16 (FC3)
1161	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
1162	# 2.6.19 and upper needs 1052
1163	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
1164	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
1165	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
1166	if [ $skip = "" ]; then
1167	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1168	fi
1169	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1170	do
1171	# Location of the swap label for kernel 2.6
1172	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1173	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1174	actual_dev=$try_dev
1175	fi
1176	done
1177	fi
1178
1179	# Check if one of all those tries has known success
1180	if [ "x$actual_dev" != "x" ]; then
1181	current_partition=$actual_dev
1182	else
1183	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1184	fi
1185	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1186	# current_partition contains only first column of /etc/fstab
1187	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
1188	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1189	actual_dev=""
1190
1191	# 1st try, findfs - the RHEL way of finding labels and their partitions
1192	if [ -x "/sbin/findfs" ]; then
1193	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1194	fi
1195
1196	# 2nd try : blkid, the good way for all UUID except swap
1197	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1198	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1199	# For LVM FS it will give a /dev/dm-# which should then be converted
1200	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1201	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1202	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1203	for dev in `ls /dev/mapper/*`; do
1204	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1205	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1206	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1207	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1208	break
1209	fi
1210	done
1211	fi
1212	fi
1213
1214	# 3th try, with vol_id
1215	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1216	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
1217	for dev in $list_dev ; do
1218	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
1219	if [ "x$dev_exists" != "x" ]; then
1220	actual_dev=$dev
1221	break;
1222	fi
1223	done
1224	fi
1225
1226	# 4th try, with dumpuuid (VMWare only ?) for swap
1227	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1228	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
1229	for dev in $list_dev ; do
1230	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
1231	if [ "x$dev_exists" != "x" ]; then
1232	actual_dev=$dev
1233	break;
1234	fi
1235	done
1236	fi
1237
1238	# Check if one of all those tries has known success
1239	if [ "x$actual_dev" != "x" ]; then
1240	current_partition=$actual_dev
1241	else
1242	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1243	fi
1244	else
1245	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1246	# they use symlinks in fstab unrelated to what is shown in mount !
1247	if [ _"$partition_mountpt" = _"" ]; then
1248	# set default in case we dont't find it
1249	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
1250	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1251	str_to_find_fmt_with=$tmpp
1252	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1253	break;
1254	fi
1255	done
1256	fi
1257	fi
1258
1259	# Avoid analyzing btrfs subvol partitions
1260	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| grep -v 'subvol=' \| head -n1`
1261	# Detects noauto partitions not mounted and exclude them
1262	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
1263	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1264	continue
1265	fi
1266	# Detects bind partitions and exclude them
1267	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
1268	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1269	continue
1270	fi
1271
1272	# Look for devices which have to be excluded
1273	skip=0
1274	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1275	l=""
1276	list_of_devices="`mr-read-all-link $current_partition`"
1277	for d in $list_of_devices; do
1278	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1279	done
1280
1281	# Remove PVs from LVs excluded
1282	l="$l `GetPVsForLV $current_partition`"
1283
1284	# We want a single unique list
1285	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
1286
1287	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
1288	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
1289	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1290	skip=1
1291	continue
1292	fi
1293	done
1294	fi
1295	if [ $skip -eq 1 ]; then
1296	continue
1297	fi
1298
1299	# sort in case of btrfs subvol
1300	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB \| sort -u`
1301	# Detects iso9660 ISO images and exclude them
1302	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
1303	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1304	continue
1305	fi
1306	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1307	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1308	# the former is then a link to the latter, so we test whether
1309	# $current_partition is actually such a link or not and set
1310	# $current_lvolume accordingly. On Debian you may find more than one answer
1311	# so we remove the one corresponding to /dev/.static
1312	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1313	# principle is the same and we need to find the link to it as well.
1314	# Note that $current_lvolume may well be an
1315	# ordinary device. It is just to make sure that we feed the right value
1316	# into any of the LVM tools if possible.
1317
1318	current_lvolume="$current_partition"
1319	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1320	# .static dir are a Debian specificity
1321	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1322	echo $current_lvolume \| grep -q ' '
1323	if [ $? -eq 0 ]; then
1324	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1325	fi
1326	# if it's not found, it may well be a real device such as a multipath one
1327	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1328	if [ _"$current_lvolume" = _"" ]; then
1329	current_lvolume="$current_partition"
1330	fi
1331	fi
1332	#
1333	# End of LVM device style variation code (other than $current_lvolume).
1334
1335	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1336	# Size computed via LVM not directly
1337	partition_size="lvm"
1338	else
1339	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1340	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1341	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1342	# Skip swap files
1343	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
1344	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
1345	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1346	[ "$partition_format" != "swap" ] && partition_format="swap"
1347	if [ "$partition_size" = "" ] ; then
1348	totalsize=0
1349	items=0
1350	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1351	totalsize=$(($totalsize+$i))
1352	items=$(($items+1))
1353	done
1354	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1355	[ "$partition_size" -lt "125000" ] && partition_size=125000
1356	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1357	fi
1358	else
1359	partition_size=`SizeOfPartition $current_partition`
1360	fi
1361	fi
1362	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1363	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1364	if [ "$partition_mountpt" = "" ] ; then
1365	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1366	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1367	partition_mountpt="raid"
1368	partition_format="raid"
1369	else
1370	partition_mountpt="lvm"
1371	partition_format="lvm"
1372	fi
1373	fi
1374	fi
1375	psz=$partition_size
1376	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1377	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1378	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1379	partition_mountpt="image"
1380	old_partition_fmt=$partition_format
1381	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1382	partition_size=$(($partition_size+1)); # just in case
1383	if [ "$partition_format" = "Linux" ] ; then
1384	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1385	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1386	partition_format=$old_partition_fmt
1387	fi
1388	fi
1389
1390	if [ ! "$partition_mountpt" ] ; then
1391	LogFile "------- $FDISK -l $qq log ------------"
1392	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
1393	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1394	[ "$partition_format" ] && break
1395	done
1396	LogFile "------- $FDISK log end ------------"
1397	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1398	partition_format="compaq"
1399	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1400	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1401	continue
1402	fi
1403	fi
1404	if [ "$redhat_label" ]; then
1405	label="$redhat_label"
1406	elif [ "$uuid" ]; then
1407	label="$uuid"
1408	fi
1409
1410	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1411	# in order to mount the root part e.g. in grub.
1412	# One way to solve this is to add the UUID now, if there wasn't one so it's
1413	# restored correctly
1414	if [ _"$label" = _"" ]; then
1415	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1416	fi
1417
1418	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1419	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1420	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1421	if [ "$current_partition" = "" ] ; then
1422	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1423	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1424	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1425	partition_mountpt=raid
1426	partition_format=raid
1427	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1428	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1429	else
1430	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1431	fi
1432	elif [ "$partition_format" = "" ] ; then
1433	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1434	elif [ "$partition_size" = "" ] ; then
1435	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1436	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1437	continue
1438	else
1439	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1440	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1441	partition_format="vfat"
1442	fi
1443	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1444	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1445	fi
1446	done
1447	LogAll "-----------------------------------"
1448
1449	# Manages btrfs subvol partitions so they can be restored
1450	# List looks like this
1451	# ID 257 gen 20074 top level 5 path <FS_TREE>/@
1452	# ID 260 gen 19927 top level 257 path @/home
1453	# ID 261 gen 19927 top level 257 path @/opt
1454	touch $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
1455	btrfs subvolume list -a / 2>/dev/null > $MINDI_TMP/btrfssubvol.txt
1456	LogFile "btrfs subvolumes layout is:"
1457	LogFile "---------------------------"
1458	cat $MINDI_TMP/btrfssubvol.txt >> $LOGFILE
1459	LogFile "---------------------------"
1460	grep -E 'btrfs[ ]+subvol=' /etc/fstab > $MINDI_TMP/btrfs-extract
1461	LogFile "btrfs subvolumes referenced in fstab:"
1462	LogFile "-------------------------------------"
1463	cat $MINDI_TMP/btrfs-extract >> $LOGFILE
1464	LogFile "-------------------------------------"
1465	# We suppose there is only one FS
1466	sep=`btrfs subvolume list -a / \| grep FS_TREE \| sed 's/.<FS_TREE>\/\(.\)/\1/'`
1467	echo "btrfs subvolume create /mnt/RESTORING/$sep" >> $MINDI_TMP/create-btrfs-subvol
1468	while read dev mp type opt dum dum; do
1469	echo $dev \| grep -qE 'UUID\|LABEL'
1470	if [ $? -eq 0 ]; then
1471	label=`echo $dev \| cut -d= -f2`
1472	device=`grep $label $mountlist \| awk '{print $1}'`
1473	else
1474	device=$dev
1475	fi
1476	subvol=`echo $opt \| awk -F$sep '{ print $2 }' \| cut -d, -f1`
1477	#top=`grep -E "@$subvol$" $MINDI_TMP/btrfssubvol.txt \| awk '{ print $7 }'`
1478	#btrfs=`grep -E "^ID $top " $MINDI_TMP/btrfssubvol.txt \| awk '{ print $9 }' \| sed 's/<FS_TREE>//' \| sed 's/@$//'`
1479	mountpoint="/mnt/RESTORING/$sep$subvol"
1480	# If the intermediate dirs of subvol are not a subvolume, we need to create them as dir
1481	parent=`dirname $subvol`
1482	grep -qE "$sep$parent$" $MINDI_TMP/btrfssubvol.txt
1483	if [ $? -ne 0 ]; then
1484	echo "mkdir -p /mnt/RESTORING/$sep$parent" >> $MINDI_TMP/create-btrfs-subvol
1485	fi
1486	echo "btrfs subvolume create $mountpoint" >> $MINDI_TMP/create-btrfs-subvol
1487	echo "mount -t btrfs -o subvol=$sep$subvol $device $mountpoint" >> $MINDI_TMP/mount-btrfs-subvol
1488	echo "umount $mountpoint" >> $MINDI_TMP/umount-btrfs-subvol
1489	done < $MINDI_TMP/btrfs-extract
1490	rm -f $MINDI_TMP/btrfs-extract
1491	chmod 755 $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
1492	LogFile "Your create-btrfs-subvol file content is:"
1493	LogFile "-----------------------------------------"
1494	cat $MINDI_TMP/create-btrfs-subvol >> $LOGFILE
1495	LogFile "-----------------------------------------"
1496	LogFile "Your mount-btrfs-subvol file content is:"
1497	LogFile "-----------------------------------------"
1498	cat $MINDI_TMP/mount-btrfs-subvol >> $LOGFILE
1499	LogFile "-----------------------------------------"
1500	LogFile "Your umount-btrfs-subvol file content is:"
1501	LogFile "-----------------------------------------"
1502	cat $MINDI_TMP/umount-btrfs-subvol >> $LOGFILE
1503	LogFile "-----------------------------------------"
1504	}
1505
1506	CheckMountlist() {
1507	local file=$1
1508	# Coherency verification
1509	ML01=`cat $file \| wc -l`
1510	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
1511	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
1512	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
1513	if [ "$ML01" -ne "$ML1" ]; then
1514	LogFile "--------------------------------------------"
1515	LogAll "WARNING: Duplicate device entry in mountlist"
1516	LogFile "--------------------------------------------"
1517	fi
1518	if [ "$ML02" -ne "$ML2" ]; then
1519	LogFile "--------------------------------------------"
1520	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1521	LogFile "------------------------------------------------"
1522	fi
1523	}
1524
1525
1526	MakeISOErrors() {
1527
1528	LogFile "----------- $ISO_CMD's errors --------------"
1529	LogAll "Command invoked: $CMD ."
1530	LogAll "$ISO_CMD returned the following errors:"
1531	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
1532	LogAll "ERROR: Failed to create ISO image."
1533	}
1534
1535	MakeISO() {
1536
1537	LogAll "INFO: Generating ISO image."
1538	LOCISO=`echo $CMD \| perl -p -e 's\|.* -o (.+)/mindi.iso .*\|$1\|'`
1539	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1540	if [ $? -ne 0 ] ; then
1541	# In case of UEFI handle differences in option handling
1542	if [ "$BOOT_TYPE" = "UEFI" ]; then
1543	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
1544	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1545	if [ $? -ne 0 ] ; then
1546	# xorriso e.g.
1547	CMD=`echo $CMD \| perl -p -e 's\|-eltorito-platform 0xEF \|\|'`
1548	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1549	if [ $? -eq 0 ] ; then
1550	LogAll "INFO: Invoking $CMD ."
1551	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1552	else
1553	MakeISOErrors
1554	fi
1555	else
1556	LogAll "INFO: Invoking $CMD ."
1557	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1558	fi
1559	else
1560	MakeISOErrors
1561	fi
1562	else
1563	LogAll "INFO: Invoking $CMD ."
1564	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1565	fi
1566	rm -f $MINDI_TMP/mkisofs.log
1567	}
1568
1569	MakeBootableDevice() {
1570
1571	local target tbc retval part size mount_opt
1572
1573	target="$1"
1574
1575	rm -Rf $MINDI_TMP/target
1576	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1577
1578	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1579	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1580	for i in memdisk memtest.bin memtest.img ; do
1581	j=$MINDI_LIB/$i
1582	k=$MINDI_TMP/target
1583	if [ -e "$j" ] ; then
1584	LogAll "INFO: Copying $j to $k"
1585	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
1586	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
1587	if [ _"$MONDO_SHARE" != _"" ]; then
1588	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
1589	fi
1590	fi
1591	done
1592
1593	retval=0
1594	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1595	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1596	if [ $? -ne 0 ] ; then
1597	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1598	retval=$(($retval+1))
1599	fi
1600	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1601	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1602	if [ $? -ne 0 ] ; then
1603	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1604	retval=$(($retval+1))
1605	fi
1606
1607	# copy boot stuff now generated in PrepareBigDir
1608	if [ "$BOOT_TYPE" = "UEFI" ]; then
1609	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1610	tbc="EFI"
1611	# Also prepare a BIOS compatible boot
1612	if [ "$target" = "ISO" ]; then
1613	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1614	fi
1615	else
1616	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1617	tbc="syslinux"
1618	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1619	LogFile "----------- syslinux's conf --------------"
1620	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1621	LogFile "------------------------------------------"
1622	fi
1623	if [ "$target" = "ISO" ]; then
1624	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1625	if [ $? -ne 0 ] ; then
1626	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1627	retval=$(($retval+1))
1628	fi
1629	fi
1630	fi
1631
1632	if [ "$ARCH" != "ia64" ] ; then
1633	if [ $KERNEL_IS_XEN = "yes" ]; then
1634	FindMboot32Binary
1635	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1636	if [ $? -ne 0 ] ; then
1637	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1638	retval=$(($retval+1))
1639	fi
1640	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
1641	if [ $? -ne 0 ] ; then
1642	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1643	retval=$(($retval+1))
1644	fi
1645	fi
1646	fi
1647
1648	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1649
1650	if [ _"$MONDO_SHARE" != _"" ]; then
1651	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1652	if [ $? -ne 0 ] ; then
1653	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1654	LogAll " Please check the target directory."
1655	retval=$(($retval+1))
1656	fi
1657	if [ $KERNEL_IS_XEN = "yes" ]; then
1658	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1659	if [ $? -ne 0 ] ; then
1660	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1661	LogAll " Please check the target directory."
1662	retval=$(($retval+1))
1663	fi
1664	fi
1665	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1666	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1667	if [ $? -ne 0 ] ; then
1668	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1669	LogAll " Please check the target directory."
1670	retval=$(($retval+1))
1671	fi
1672	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1673	if [ $? -ne 0 ] ; then
1674	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1675	LogAll " Please check the target directory."
1676	retval=$(($retval+1))
1677	fi
1678	fi
1679
1680	if [ -f "$MINDI_TMP/$MRCFG" ]; then
1681	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1682	fi
1683
1684	LogFile "----------- target dir content -----------"
1685	LogFile "------------------------------------------"
1686	ls -lR $MINDI_TMP/target >> $LOGFILE
1687	LogFile "------------------------------------------"
1688	LogFile "----------- target dir sizes -------------"
1689	du -sk $MINDI_TMP/target/* >> $LOGFILE
1690	LogFile "------------------------------------------"
1691
1692	if [ "$retval" -ne "0" ] ; then
1693	sync
1694	umount $MINDI_TMP/target
1695	LogAll "ERROR: Problems while creating boot media."
1696	LogAll " Please unload some of your modules and try again."
1697	Die " Try using another temporary directory instead of $MINDI_TMP"
1698	fi
1699
1700	mkdir -p $MINDI_TMP/mpt
1701
1702	if [ "$target" = "USB" ]; then
1703	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1704	LogAll "INFO: Checking $USBDEVICE"
1705	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1706	if [ $? -ne 0 ]; then
1707	LogAll "ERROR: Unable to access $USBDEVICE"
1708	LogAll " Make sure your USB device is plugged in"
1709	MindiExit -1
1710	fi
1711	# Some distro do auto mount at that point (Ubuntu)
1712	LogAll "INFO: Unmounting $USBPART just in case"
1713	sync
1714	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1715	if [ "$BOOT_TYPE" = "BIOS" ]; then
1716	# If your key has no MBR it may cause an issue
1717	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1718	if [ -r $MBRFILE ]; then
1719	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1720	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1721	else
1722	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1723	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1724	fi
1725	fi
1726	LogAll "INFO: Preparing $USBDEVICE"
1727	cat > $MINDI_TMP/fdisk.txt << EOF
1728	d
1729	d
1730	d
1731	d
1732	n
1733	p
1734	1
1735
1736
1737	t
1738	b
1739	a
1740	1
1741	w
1742	EOF
1743	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1744	if [ $? -ne 0 ]; then
1745	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1746	LogAll " Make sure your USB device is plugged in"
1747	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1748	MindiExit -1
1749	fi
1750	LogFile "fdisk build file"
1751	LogFile "----------------"
1752	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1753	LogFile "----------------"
1754	rm -f $MINDI_TMP/fdisk.txt
1755	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1756	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1757	# Calling kpartx in case devices were not created
1758	if [ -x "/sbin/kpartx" ]; then
1759	/sbin/kpartx -a $USBDEVICE
1760	fi
1761	# Some distro do auto mount at that point (Ubuntu)
1762	LogAll "INFO: Unmounting $USBPART just in case again"
1763	sync
1764	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1765	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1766	if [ "`which dmsetup`" != "" ]; then
1767	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
1768	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
1769	LogAll "INFO: Removing $block_id from device mapper."
1770	sleep 1
1771	dmsetup remove $block_id
1772	fi
1773	fi
1774	part=$USBPART
1775	mount_opt=""
1776	else
1777	# ISO image
1778	part=$MINDI_TMP/mindi-bootroot.img
1779	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
1780	# Adds 10 MB to allow for additional space
1781	size=$(($size+10000))
1782	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1783	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
1784	mount_opt="-o loop"
1785	fi
1786
1787	LogAll "INFO: Creating a vfat filesystem on $part"
1788
1789	mkfs.vfat $part 2>&1 >> $LOGFILE
1790	if [ $? -ne 0 ]; then
1791	LogAll "ERROR: Unable to create a vfat filesystem on $part"
1792	if [ "$target" = "USB" ]; then
1793	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1794	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1795	fi
1796	MindiExit -1
1797	fi
1798	if [ "$target" = "ISO" ]; then
1799	if [ "$BOOT_TYPE" = "BIOS" ]; then
1800	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
1801	# and run after the formating for versions > 6 it seems
1802	syslinux $part >> $LOGFILE 2>> $LOGFILE
1803	fi
1804	fi
1805	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1806	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1807	if [ $? -ne 0 ]; then
1808	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1809	if [ "$target" = "USB" ]; then
1810	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1811	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1812	fi
1813	MindiExit -1
1814	fi
1815
1816	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1817	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1818	if [ $? -ne 0 ] ; then
1819	LogFile "--------------------------------"
1820	LogFile "INFO: Size of $MINDI_TMP/mpt:"
1821	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1822	LogFile "--------------------------------"
1823	sync
1824	umount $MINDI_TMP/mpt
1825	LogAll "ERROR: Problems while creating boot media."
1826	LogAll " Please unload some of your modules and try again."
1827	Die " Try using another temporary directory instead of $MINDI_TMP"
1828	fi
1829
1830	if [ "$target" = "ISO" ]; then
1831	if [ "$ARCH" != "ia64" ]; then
1832	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1833	fi
1834	# ISO
1835	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1836	CMD="$ISO_CMD $ISO_OPT"
1837	MakeISO
1838	else
1839	if [ "$ARCH" = "ia64" ]; then
1840	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1841	else
1842	# UEFI
1843	echo "$CMD" \| grep -q "xorriso"
1844	if [ $? -eq 0 ]; then
1845	XOV=`xorriso --version 2>&1 \| head -1 \| awk '{print $3}'`
1846	XOVMAJ=`echo $XOV \| cut -d. -f1`
1847	XOVMIN=`echo $XOV \| cut -d. -f2`
1848	if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
1849	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
1850	else
1851	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
1852	fi
1853	else
1854	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1855	fi
1856	fi
1857	fi
1858	fi
1859
1860	# Avoids graphical tool to keep the FS mounted
1861	sync
1862	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
1863
1864	if [ "$target" = "ISO" ]; then
1865	cp $part $MINDI_CACHE
1866	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
1867	# Mount again !
1868	LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
1869	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1870	# We just need the EFI dir and the boot image for this case
1871	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1872	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1873	# We need again the kernel+initrd at the root for UEFI boot at least
1874	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1875	# We need the boot image now and what mindi needs at restore time as well
1876	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1877	# Avoids graphical tool to keep the FS mounted
1878	sync
1879	umount $MINDI_TMP/mpt2
1880	LogFile "----------- target dir content -----------"
1881	LogFile "------------------------------------------"
1882	ls -lR $MINDI_TMP/mpt >> $LOGFILE
1883	LogFile "------------------------------------------"
1884	MakeISO
1885	fi
1886	else
1887	# USB
1888	if [ "$ARCH" != "ia64" ] ; then
1889	syslinux -v 2>&1 \| grep -q 4.02
1890	if [ $? -eq 0 ]; then
1891	# This buggy version of syslinux requires a call to --stupid and not -s
1892	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1893	res=$?
1894	else
1895	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1896	res=$?
1897	fi
1898	if [ $res -ne 0 ] ; then
1899	LogAll "----------- syslinux's errors --------------"
1900	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1901	LogAll "------------------------------------------"
1902	LogAll "ERROR: Failed to create USB image."
1903	else
1904	LogFile "INFO: Created bootable USB image on $USBDEVICE"
1905	fi
1906	rm -f $MINDI_TMP/syslinux.log
1907	else
1908	LogAll "ERROR: No USB boot support for ia64"
1909	MindiExit -1
1910	fi
1911	fi
1912	}
1913
1914
1915	OfferToMakeBootableUSB() {
1916
1917	local i files
1918
1919	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1920	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1921	read i
1922	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1923	if [ "$USBDEVICE" = "" ]; then
1924	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1925	read dev
1926	USBDEVICE=$dev
1927	fi
1928	echo "WARNING: This will erase all content on $USBDEVICE"
1929	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1930	read i
1931	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1932	else
1933	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1934	Die "No USBDEVICE environment variable declared, aborting"
1935	fi
1936	fi
1937	USBPART="${USBDEVICE}1"
1938
1939	MakeBootableDevice USB
1940	}
1941
1942
1943	OfferToMakeBootableISO() {
1944
1945	local i files
1946
1947	if [ -z "$ISO_CMD" ]; then
1948	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1949	return
1950	fi
1951
1952	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1953	echo -en "\nShall I make a bootable CD image? (y/[n]) "
1954	read i
1955	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1956	fi
1957
1958	MakeBootableDevice ISO
1959	}
1960
1961
1962	MakeMessageFile() {
1963
1964	if [ -x "/bin/lsb_release" ]; then
1965	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
1966	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1967	DESC="Arch Linux"
1968	if [ -r /var/log/pacman.log ]; then
1969	# there are no releases but we can get the last system upgrade
1970	# Output example: Arch Linux [2011-03-03 01:39]
1971	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
1972	fi
1973	elif [ -x "/etc/os-release" ]; then
1974	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
1975	elif [ -x "/usr/bin/pbdistrocheck" ]; then
1976	# For pb >= 0.9.8
1977	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
1978	elif [ -r /etc/issue.net ]; then
1979	DESC=`head -1 /etc/issue.net`
1980	elif [ -r /etc/issue ]; then
1981	DESC=`head -1 /etc/issue`
1982	else
1983	DESC="Unknown desc"
1984	fi
1985	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
1986	if [ _"$MONDO_SHARE" != _"" ]; then
1987	if [ "$CDRECOVERY" != "yes" ] ; then
1988	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1989	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1990	echo -en "$BOOT_MEDIA_MESSAGE"
1991	elif [ ! "$MINDI_TMP" ] ; then
1992	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1993	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1994	echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1995	fi
1996	else
1997	echo -en "$BOOT_MEDIA_MESSAGE"
1998	fi
1999	else
2000	echo -en "\
2001	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
2002	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
2003	fi
2004	fi
2005
2006	# Also create the other help screens
2007	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
2008	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
2009	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
2010	}
2011
2012
2013	MakeBootConfFile() {
2014	local options i ooo
2015	options=""
2016	# Type of boot file (elilo or syslinux/isolinux)
2017	type=$1
2018	if [ "$type" = "elilo" ] \|\| [ "$type" = "grub2" ]; then
2019	sep="="
2020	sepdef="="
2021	else
2022	sep=" "
2023	sepdef=" "
2024	fi
2025
2026	# Generic header for conf file
2027	if [ "$type" = "elilo" ]; then
2028	echo -en "prompt\n"
2029	elif [ "$type" = "grub" ]; then
2030	echo -en "pause Press a key when ready to restore\n"
2031	elif [ "$type" = "grub2" ]; then
2032	echo -en "set "
2033	else
2034	# syslinux family
2035	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
2036	fi
2037
2038	# Compute which default option to boot from
2039	echo -en "default${sepdef}"
2040	if [ "$CDRECOVERY" = "yes" ] ; then
2041	if [ "$type" = "grub" ]; then
2042	# TODO: Which num ???
2043	echo -en "0\n"
2044	else
2045	echo -en "RESTORE\n"
2046	fi
2047	# In case it's mondoarchive
2048	elif [ _"$MONDO_SHARE" != _"" ]; then
2049	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2050	if [ "$type" = "grub" ]; then
2051	echo -en "3\n"
2052	else
2053	echo -en "iso\n"
2054	fi
2055	else
2056	if [ "$type" = "grub" ]; then
2057	echo -en "1\n"
2058	else
2059	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
2060	fi
2061	fi
2062	else
2063	if [ "$type" = "grub" ]; then
2064	echo -en "0\n"
2065	else
2066	echo -en "expert\n"
2067	fi
2068	fi
2069
2070	# Handle timeout
2071	if [ "$type" = "grub2" ]; then
2072	seppref="set "
2073	else
2074	seppref=""
2075	fi
2076	if [ "$CDRECOVERY" = "yes" ] ; then
2077	echo -en "${seppref}timeout${sep}10000\n"
2078	else
2079	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2080	fi
2081	echo -en "\n"
2082
2083	# prepare which labels will be generated
2084	if [ "$CDRECOVERY" = "yes" ] ; then
2085	options="RESTORE expert"
2086	else
2087	if [ _"$MONDO_SHARE" != _"" ]; then
2088	options="interactive expert compare iso nuke isonuke"
2089	else
2090	options="expert"
2091	fi
2092	fi
2093
2094	# Generate rest of conf file
2095	for i in $options ; do
2096	ooo=$i
2097	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2098	if [ "$type" = "elilo" ]; then
2099	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2100	elif [ "$type" = "grub" ]; then
2101	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2102	elif [ "$type" = "grub2" ]; then
2103	if [ "$BOOT_TYPE" = "UEFI" ]; then
2104	lorder="linuxefi"
2105	iorder="initrdefi"
2106	else
2107	lorder="linux"
2108	iorder="initrd"
2109	fi
2110	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2111	else
2112	ps="/"
2113	if [ $KERNEL_IS_XEN = "no" ]; then
2114	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2115	else
2116	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2117	fi
2118	fi
2119	echo -en "$outstr"
2120	done
2121	if [ -e "$MINDI_LIB/memtest.img" ] ; then
2122	if [ "$type" = "elilo" ]; then
2123	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2124	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2125	elif [ "$type" = "grub" ]; then
2126	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2127	elif [ "$type" = "grub2" ]; then
2128	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2129	else
2130	ps="/"
2131	if [ "$type" = "syslinux" ]; then
2132	ps=""
2133	fi
2134	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2135	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2136	fi
2137	fi
2138	}
2139
2140	ParseModprobeForIncludes() {
2141	local MODPROBE_CONF mpincfile includes include
2142
2143	MODPROBE_CONF=/etc/modprobe.conf
2144	mpincfile=$1
2145	touch $mpincfile
2146	if [ -a $MODPROBE_CONF ]; then
2147	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
2148	if [ -n "$includes" ]; then
2149	for include in $includes
2150	do
2151	if [ -a "$include" ]; then
2152	echo $include >> $mpincfile
2153	fi
2154	done
2155	fi
2156	fi
2157	}
2158
2159	PrepareBootDir() {
2160
2161	local detect
2162	# Needs a bigdir variable setup before calling it
2163
2164	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
2165	# to get it on the media (in addition to the boot part
2166	# and also to support UEFI boot mechanism
2167	if [ "$boottype" != "" ]; then
2168	detect="no"
2169	else
2170	detect="yes"
2171	boottype=syslinux
2172	fi
2173	bootdir=$bigdir/$boottype
2174	bootconf="$bootdir/$boottype.cfg"
2175	mkdir -p $bootdir
2176	FindLdlinux32Binary
2177
2178	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
2179	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
2180
2181	if [ "$BOOT_TYPE" != "BIOS" ]; then
2182	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2183	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2184	MindiExit -1
2185	fi
2186
2187	mountefi=0
2188	# EFI or UEFI
2189	# TODO: names are hard-coded for now
2190	if [ "$BOOT_TYPE" = "UEFI" ]; then
2191	# UEFI
2192	efidir=$bigdir/EFI/BOOT
2193	# Auto-detection if needed
2194	if [ $detect = "yes" ]; then
2195
2196	# mount /boot/efi if needed
2197	df -T \| grep /boot/efi \| grep -qE 'vfat'
2198	if [ $? -ne 0 ]; then
2199	mount /boot/efi
2200	if [ $? -ne 0 ]; then
2201	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2202	MindiExit -1
2203	fi
2204	mountefi=1
2205	fi
2206
2207	# On RHEL6 grub works
2208	if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
2209	boottype=grub
2210	elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
2211	boottype=grub2
2212	elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
2213	boottype=grub2
2214	elif [ $dname = "sles" ] && [ $dver -ge 12 ]; then
2215	boottype=grub2
2216	elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
2217	boottype=grub2
2218	else
2219	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2220	boottype=syslinux
2221	fi
2222	fi
2223	if [ "$boottype" = "syslinux" ]; then
2224	if [ ! "$bootbin" ]; then
2225	FindSyslinux64EFI
2226	bootbin=$SYSLINUX64EFI
2227	fi
2228	bootconf="$efidir/syslinux.cfg"
2229	elif [ "$boottype" = "grub" ]; then
2230	if [ ! "$bootbin" ]; then
2231	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
2232	fi
2233	bootconf="$efidir/BOOTX64.conf"
2234	elif [ "$boottype" = "grub2" ]; then
2235	if [ ! "$bootbin" ]; then
2236	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
2237	fi
2238	bootconf="$efidir/grub.cfg"
2239	fi
2240
2241	# Depending on the arch, the target boot file is different
2242	if [ "$ARCH" = "x86_64" ] ; then
2243	tgbin="BOOTX64.efi"
2244	elif [ "$ARCH" = "armv8" ]; then
2245	tgbin="BOOTAA64.efi"
2246	else
2247	# i?386
2248	tgbin="BOOTIA32"
2249	fi
2250	else
2251	# EFI
2252	efidir=$bootdir
2253	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
2254	tgbin=$bootbin
2255	boottype=elilo
2256	bootconf="$efidir/elilo.conf"
2257	fi
2258	LogAll "INFO: Found $boottype boot type"
2259	mkdir -p $efidir
2260	cp $bootbin $efidir/$tgbin
2261
2262	if [ $mountefi -eq 1 ]; then
2263	umount /boot/efi 2>&1 > /dev/null
2264	fi
2265
2266	if [ $boottype = "syslinux" ]; then
2267	FindLdlinuxe64Binary
2268	if [ -e "$LDLINUXE64" ]; then
2269	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2270	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2271	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2272	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2273	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2274	fi
2275	fi
2276	fi
2277	# tgdir for syslinux
2278	tgdir=$bigdir/EFI
2279	else
2280	# tgdir for syslinux
2281	tgdir=$bootdir
2282	fi
2283	# In all cases prepare syslinux content for BIOS mode
2284	# so that we can have multi boot mode media BIOS+UEFI
2285	# Useful for syslinux 5.x
2286	if [ -e "$LDLINUXC32" ]; then
2287	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2288	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2289	fi
2290	if [ -e `dirname $LDLINUXC32`/isolinux.c32 ]; then
2291	LogFile "INFO: Copying isolinux.c32 to $tgdir"
2292	cp `dirname $LDLINUXC32`/isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2293	fi
2294
2295	MakeBootConfFile $boottype > $bootconf
2296	LogFile "Boot Conf file $bootconf content is:"
2297	LogFile "------------------------------------"
2298	cat $bootconf >> $LOGFILE
2299	LogFile "------------------------------------"
2300	if [ "$BOOT_TYPE" = "UEFI" ]; then
2301	# Also generate the syslinux conf
2302	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2303	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2304	LogFile "---------------------------------------------------"
2305	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2306	LogFile "---------------------------------------------------"
2307	if [ $dname = "debian" ] && [ $dver -ge 8 ]; then
2308	# In that case it seems we need conf file at the root of the media
2309	cp -a $bigdir/EFI/* $bigdir
2310	fi
2311	fi
2312
2313	}
2314
2315	PrepareBigDirTar() {
2316	echo -en "INFO: Tarring and zipping the data content..."
2317	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2318	LogFile "Size of the data content"
2319	LogFile "------------------------"
2320	du -sk $MINDI_CACHE/*gz >> $LOGFILE
2321	LogFile "------------------------"
2322	echo -e "$DONE"
2323
2324	}
2325
2326	CleanBigDir() {
2327	[ "$bigdir" != "/" ] && echo $bigdir \| grep -vq $MINDI_TMP && rm -rf $bigdir
2328	}
2329
2330	PrepareBigDir() {
2331	local needlist diskdir res i j k lines lfiles includefile
2332
2333	rm -f $MINDI_CACHE/mindi.iso
2334	needlist=$MINDI_TMP/what-we-need.txt
2335	mkdir -p $bigdir/usr/bin
2336	mkdir -p $bigdir/usr/sbin
2337	includefile=$MINDI_TMP/$$.includefile.txt
2338
2339	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
2340	if [ -e "$DEPLIST_FILE" ]; then
2341	lfiles="$DEPLIST_FILE $lfiles"
2342	fi
2343	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
2344	ParseModprobeForIncludes $includefile
2345	lines=$(($lines+`cat $includefile \| wc -l`))
2346	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
2347	res=$?
2348	rm -f $includefile
2349	ListKernelModulePaths >> $needlist
2350	if [ "$res" -ne "0" ] ; then
2351	Die "You have $res files present in dependency list\nbut absent from filesystem."
2352	fi
2353	mkdir -p $bigdir/tmp
2354	if [ _"$MONDO_SHARE" != _"" ]; then
2355	# TODO: no reason to have the cfg file stored twice
2356	MakeMondoConfigFile $MINDI_TMP/$MRCFG
2357	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2358	fi
2359
2360	# Needs to be done after the MRCFG creation
2361	FindAndAddUserKeyboardMappingFile
2362
2363	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2364	DropOptimizedLibraries $needlist $bigdir
2365	echo -en "INFO: Assembling dependency files"
2366
2367	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2368	rm -f $needlist
2369	echo -e "$DONE"
2370
2371	# also copy io.sys and msdos.sys, if we can find them
2372	for i in `mount \| cut -d' ' -f3` ; do
2373	for j in io.sys msdos.sys ; do
2374	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2375	done
2376	done
2377
2378	# master boot record, too
2379	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2380	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2381	LogAll "INFO: Backing up $i's MBR"
2382	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2383	sleep 1
2384	sync
2385	j=$i
2386	[ -h "$j" ] && j=`readlink -f $j`
2387	LogAll "INFO: Creating /dev/boot_device ($j)"
2388	mkdir -p $bigdir/dev
2389	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
2390	fi
2391
2392	# Get terminfo content
2393	ti="usr/share/terminfo/l"
2394	if [ -d /$ti ]; then
2395	mkdir -p $bigdir/$ti
2396	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
2397	fi
2398	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2399	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2400	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2401	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2402	fi
2403	if [ -d "/lib/dev-state" ]; then
2404	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2405	fi
2406	MakeMountlist $MINDI_TMP/mountlist.txt
2407	CheckMountlist $MINDI_TMP/mountlist.txt
2408	mkdir -p $bigdir/tmp
2409	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2410	cp -f $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol $bigdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy subvol scripts from $MINDI_TMP to data disk"
2411	if [ _"$MONDO_SHARE" != _"" ]; then
2412	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2413	fi
2414	if [ $LVM != "false" ]; then
2415	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2416	if [ $? -ne 0 ]; then
2417	LVM="false"
2418	rm -f $bigdir/tmp/i-want-my-lvm
2419	else
2420	LogFile "Your i-want-my-lvm file content is:"
2421	LogFile "-----------------------------------"
2422	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2423	LogFile "-----------------------------------"
2424	fi
2425	fi
2426	LogFile "INFO: Your mountlist.txt file content is:"
2427	LogFile "-----------------------------------"
2428	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2429	LogFile "-----------------------------------"
2430
2431	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2432	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2433	if [ _"$MONDO_SHARE" != _"" ]; then
2434	for q in filelist.full.gz biggielist.txt ; do
2435	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2436	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2437	done
2438	fi
2439
2440	PrepareBootDir
2441
2442	}
2443
2444
2445	Prompt() {
2446	echo -en "$1"
2447	read line
2448	}
2449
2450
2451	ReadLine() {
2452	local i incoming
2453	read incoming
2454	i=0
2455	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2456	i=$(($i+1))
2457	read incoming
2458	done
2459	echo "$incoming"
2460	}
2461
2462
2463	SizeOfPartition() {
2464	local devpath drive res stub
2465	device=$1
2466	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
2467	Die "Cannot find $device's size - is your /etc/fstab sane?"
2468	fi
2469	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
2470	res=`SizeOfRaidPartition $device`
2471	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2472	echo "$res"
2473	return 0
2474	fi
2475	# patch from Bill <bill@iwizard.biz> - 2003/08/25
2476	res=`$FDISK -s $device 2>> $LOGFILE`
2477	# end patch
2478	# take only the first in case of multiple mount (cifs, nfs, ...)
2479	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
2480	[ "$res" = "" ] && res="-1"
2481	echo $res
2482	return 0
2483	}
2484
2485
2486	SizeOfRaidPartition() {
2487	local real_dev smallest_size silly tmp
2488
2489	silly=999999999
2490	smallest_size=$silly
2491
2492	for real_dev in `GetRaidDevMembers $1` ; do
2493	tmp=`SizeOfPartition $real_dev`
2494	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2495	done
2496
2497	if [ "$smallest_size" = "$silly" ] ; then
2498	echo "-1"
2499	return 1
2500	else
2501	echo "$smallest_size"
2502	return 0
2503	fi
2504	}
2505
2506
2507	StripExecutable()
2508	{
2509	local tmpfile
2510
2511	tmpfile=$MINDI_TMP/stripped.$$.dat
2512	[ -d "$1" ] \|\| [ -h "$1" ] && return
2513	cp -f $1 $tmpfile 2>> $LOGFILE
2514	strip $tmpfile 2> /dev/null
2515	if [ $? -eq 0 ] ; then
2516	cp -f $tmpfile $1 2>> $LOGFILE
2517	LogFile "INFO: Stripped binary $2"
2518	fi
2519	rm -f $tmpfile
2520	}
2521
2522	KernelVer() {
2523	local fkern_ver fname
2524
2525	fname=$1
2526	file $fname \| grep -q gzip
2527	if [ $? -eq 0 ] ; then
2528	# Used by ia64
2529	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2530	else
2531	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2532	fi
2533	echo "$fkern_ver"
2534	}
2535
2536
2537	# WARNING: This function should just echo the final result !!!
2538	#
2539	TryToFindKernelPath() {
2540	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2541
2542	we_want_version=$KERVERRUN
2543	possible_kernels=""
2544	duff_kernels=""
2545	output=""
2546
2547	if [ "$ARCH" = "ia64" ] ; then
2548	root="/boot/efi/efi"
2549	else
2550	root="/"
2551	fi
2552	# See if we're booted from a Xen kernel
2553	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2554	if [ -f /proc/xen/capabilities ]; then
2555	# It's a Xen kernel
2556	KERNEL_IS_XEN="yes"
2557	LogFile "INFO: It's a Xen kernel..."
2558	fi
2559
2560	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
2561	[ ! -e "$fname" ] && continue
2562	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2563	fkern_ver=`KernelVer $fname`
2564	[ "$fkern_ver" = "" ] && continue
2565	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2566	[ -f "$fname" ] \|\| continue
2567	[ -h "$fname" ] && continue
2568	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2569	file $fname \| grep -q gzip
2570	if [ $? -eq 0 ] ; then
2571	# Used by ia64
2572	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2573	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2574	duff_kernels="$fname $duff_kernels"
2575	else
2576	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2577	possible_kernels="$fname $possible_kernels"
2578	fi
2579	else
2580	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2581	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2582	duff_kernels="$fname $duff_kernels"
2583	else
2584	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2585	possible_kernels="$fname $possible_kernels"
2586	fi
2587	fi
2588	done
2589	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2590	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
2591	fi
2592	if [ ! "$possible_kernels" ] ; then
2593	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2594	possible_kernels="$duff_kernels"
2595	if [ ! "$possible_kernels" ] ; then
2596	LogAll "INFO: Sorry, no duff kernels either"
2597	else
2598	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2599	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2600	fi
2601	fi
2602	if [ $KERNEL_IS_XEN = "yes" ]; then
2603	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
2604	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2605	fi
2606	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
2607	noof_kernels=`CountItemsIn "$possible_kernels"`
2608	if [ "$noof_kernels" -eq "0" ] ; then
2609	LogAll "Could not find your kernel."
2610	if [ -e "/boot/vmlinuz" ] ; then
2611	LogAll "INFO: Using /boot/vmlinuz as a last resort."
2612	output=/boot/vmlinuz
2613	else
2614	output=""
2615	fi
2616	elif [ "$noof_kernels" -eq "1" ] ; then
2617	kp=`echo "$possible_kernels" \| sed s/' '//`
2618	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2619	output="$kp"
2620	else
2621	for i in $possible_kernels ; do
2622	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2623	LogAll "INFO: OK, I used my initiative and found that "
2624	LogAll "INFO: $i is probably your kernel. "
2625	output="$i"
2626	break
2627	fi
2628	done
2629	if [ ! -n "$output" ]; then
2630	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2631	output=/boot/vmlinuz
2632	LogFile "INFO: Schlomo, this one's for you."
2633	else
2634	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2635	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2636	LogFile "INFO: $possible_kernels"
2637	output=""
2638	fi
2639	fi
2640	fi
2641	if [ $KERNEL_IS_XEN = "yes" ]; then
2642	if [ "$noof_xenkernels" -eq "0" ]; then
2643	xenkernelpath=""
2644	elif [ "$noof_xenkernels" -eq "1" ]; then
2645	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
2646	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2647	else
2648	for i in $possible_xenkernels ; do
2649	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2650	LogFile "INFO: OK, I used my initiative and found that "
2651	LogFile "INFO: $i is probably your Xen kernel. "
2652	xenkernelpath="$i"
2653	break
2654	fi
2655	done
2656	if [ ! -n "$xenkernelpath" ]; then
2657	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
2658	if [ ! -n "$new_possible_xenkernels" ]; then
2659	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2660	LogFile "INFO: Using $xenkernelpath"
2661	else
2662	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2663	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2664	LogFile "INFO: $possible_xenkernels"
2665	output=""
2666	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2667	LogFile "INFO: Using $xenkernelpath"
2668	fi
2669	fi
2670	fi
2671	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
2672	Die "Cannot find Xen kernel $xenkernelpath, aborting"
2673	fi
2674	fi
2675	#LogAll "TryToFindKernelPath found $output"
2676	echo "$output"
2677	}
2678
2679	CopyFromConf() {
2680
2681	conf=$1
2682	mp=$2
2683	echo -en "INFO: Gathering dependencies of $conf.conf..."
2684	LogFile "INFO: Gathering dependencies of $conf.conf..."
2685	lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf \| sort -u`
2686	noof_lines=`echo $lis2 \| wc -w`
2687	progress=0
2688	# Get only the files which exist in that list
2689	# and potentially their symlink structure
2690	# put apart directories for later handling
2691	for f in $lis2; do
2692	if [ -d $f ]; then
2693	for g in `find $f`; do
2694	echo $g >> $MINDI_TMP/$conf.lis
2695	LocateDeps $g >> $MINDI_TMP/$conf.lis2
2696	done
2697	lis3="$lis3 $f"
2698	else
2699	if [ -r $f ]; then
2700	echo $f >> $MINDI_TMP/$conf.lis
2701	LocateDeps $f >> $MINDI_TMP/$conf.lis2
2702	fi
2703	fi
2704	progress=$(($progress+1))
2705	LogProgress $progress $noof_lines
2706	done
2707	echo -e "$DONE"
2708	LogAll "INFO: Processing all dependencies links for $conf.conf..."
2709	# And their deps except dirs
2710	lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
2711	rm -f $MINDI_TMP/$conf.lis2
2712	finallist=""
2713	# Remove directories from the list, as cp will create them anyway
2714	# and it may hurt if /lib is in it as on Debian/Ubuntu
2715	# recent bash says that -d is true for a link to a dir !
2716	for f in $lines; do
2717	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
2718	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
2719	if [ ! -e "$mp/$f" ]; then
2720	finallist="$finallist $f"
2721	fi
2722	fi
2723	done
2724	# But adds the directory useful in $lis3
2725	fnllist=`echo $finallist $lis3 \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
2726	LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
2727	cp -a --parents $fnllist -t $mp/ 2> $templog \|\| LogAll "WARNING: Problem in $conf analysis" $templog
2728	rm -f $MINDI_TMP/$conf.lis
2729	}
2730
2731	PrepareTargetDir() {
2732	local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2733
2734	tgz_dir_fname=$MINDI_LIB/rootfs
2735	rdz_fname=$MINDI_TMP/initrd.img
2736	kernelsize=`du -sk $kernelpath \| cut -f1`
2737	res=0
2738	templog=$MINDI_TMP/$$.log
2739	> $templog
2740
2741	mkdir -p $targetdir
2742	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2743	for d in bin sbin lib lib64; do
2744	if [ -h "/$d" ]; then
2745	thelink=`readlink /$d`
2746	mkdir -p $targetdir/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $targetdir"
2747	mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
2748	if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
2749	rmdir $targetdir/$d
2750	fi
2751	if [ ! -h $targetdir/$d ]; then
2752	rm -f $targetdir/$d 2> /dev/null
2753	(cd $targetdir ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
2754	fi
2755	fi
2756	done
2757
2758	LogFile "INFO: what is now in $targetdir"
2759	ls -al $targetdir >> $LOGFILE
2760
2761	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2762	# copy from rootfs into targetdir
2763	LogAll "INFO: Copying Mindi files onto $targetdir"
2764	for f in $tgz_dir_fname/*; do
2765	if [ ! -r $f ]; then
2766	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2767	else
2768	cp -af $f $targetdir 2>&1 >> $LOGFILE
2769	fi
2770	done
2771	(cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2772	# kernel expects linuxrc in ext2 filesystem
2773	(cd $targetdir ; ln -sf usr/sbin/init linuxrc)
2774	# kernel expects init in cpio filesystem
2775	(cd $targetdir ; ln -sf usr/sbin/init init)
2776
2777	(cd $targetdir/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2778
2779	for w in insmod.static insmod.static.old ; do
2780	s=`which $w 2> /dev/null`
2781	if [ -e "$s" ] ; then
2782	tar cf - -C / $s 2> /dev/null \| (cd $targetdir ; tar xf -)
2783	fi
2784	done
2785
2786	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2787
2788	# Copy of files mandatory for ssh to automate mount if sshfs is used
2789	mkdir -p $targetdir/.ssh $targetdir/tmp
2790	cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
2791	cat > $targetdir/tmp/myssh << EOF
2792	ssh -o StrictHostKeyChecking=no \$*
2793	EOF
2794	chmod 755 $targetdir/tmp/myssh
2795
2796	# Copy of files mandatory for ld.so
2797	cp -a /etc/ld.so.c* $targetdir/etc
2798
2799	# Handle the case where busybox and mount are dynamically linked
2800	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
2801	if [ $? -eq 0 ]; then
2802	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
2803	rm -f $targetdir/bin/mount
2804	fi
2805
2806	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2807	CopyFromConf minimal $targetdir
2808
2809	# For older distributions expecting /sbin/init provides it
2810	if [ ! -e "$targetdir/sbin/init" ]; then
2811	(cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
2812	fi
2813
2814	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2815	(cd $targetdir ; ln -sf /bin/bash bin/sh)
2816	LogFile "INFO: Using bash as default shell"
2817
2818	# Avoids an issue on some distro (RHEL5)
2819	rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
2820
2821	# Management of DRBD
2822	which drbdadm &> /dev/null
2823	if [ $? -eq 0 ]; then
2824	# Do we find DRBD devices setup
2825	drbdadm sh-dev all \| grep -E '^/dev' &> /dev/null
2826	if [ $? -eq 0 ]; then
2827	CopyFromConf drbd $targetdir
2828	fi
2829	# DRBD requires net activation
2830	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
2831	fi
2832
2833	# Management of udev (which includes modprobe in rules)
2834	ps auxww \| grep -v grep \| grep -qw udevd
2835	if [ $? -eq 0 ]; then
2836	echo "udev device manager found" > $targetdir/tmp/USE-UDEV
2837	LogFile "INFO: udev device manager found"
2838	tar cf - -C / /etc/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
2839	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2840	rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2841	# Do not do it if it's a link (Ubuntu 64 bits #503)
2842	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2843	tar cf - -C / /lib64/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2844	fi
2845	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2846	tar cf - -C / /lib32/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2847	fi
2848	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2849	tar cf - -C / /lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
2850	fi
2851	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
2852	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2853	fi
2854	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
2855	CopyFromConf udev $targetdir
2856	else
2857	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2858	LogAll " mindi will use static devices which may cause problems"
2859	rm -f $targetdir/tmp/USE-UDEV
2860	fi
2861	fi
2862
2863	# Management of potential HW info (ProLiant only at the moment)
2864	rm -rf $MINDI_CACHE/bkphw
2865	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
2866	if [ -d $MINDI_CACHE/bkphw ]; then
2867	LogAll "INFO: Hardware Information found and saved ..."
2868	cp -rp $MINDI_CACHE/bkphw $targetdir
2869	if [ -f $MINDI_CACHE/tools.files ]; then
2870	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2871	LocateDeps $lis > $MINDI_TMP/tools.lis
2872	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
2873	fi
2874	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2875	mv -f $MINDI_CACHE/mindi-rsthw $targetdir
2876	chmod 755 $targetdir/mindi-rsthw
2877	fi
2878	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2879	fi
2880
2881	# Management of perl scripts delivered needed at restore time
2882	LogAll "INFO: Analyzing perl modules dependencies..."
2883	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2884	LogFile "DBG4: Perl Modules found:"
2885	LogFile "-------------------------"
2886	cat $MINDI_TMP/perl.lis >> $LOGFILE
2887	LogFile "-------------------------"
2888	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
2889
2890	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
2891
2892	needed_modules=""
2893	list_of_mods="$CDROM_MODS $FORCE_MODS"
2894
2895	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2896	# For PXE boot
2897	list_of_mods="$list_of_mods $NET_MODS"
2898	fi
2899	for i in $DENY_MODS; do
2900	LogFile "INFO: Removing $i from the list of modules to load"
2901	list_of_mods=`echo ${list_of_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2902	done
2903
2904	if [ "${kernelname}" != "" ]; then
2905	needed_modules_path=lib/modules/${kernelname}
2906	mkgmopt="-k ${kernelname}"
2907	else
2908	needed_modules_path=lib/modules/$KERVERRUN
2909	mkgmopt="-k $KERVERRUN"
2910	fi
2911
2912	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
2913	LogAll "INFO: Analyzing kernel modules dependencies..."
2914	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
2915
2916	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2917	cp --parents -aL $needed_modules $targetdir/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $targetdir" $templog
2918
2919	# Uncompress modules if not using udev and native modprobe
2920	if [ ! -f $targetdir/tmp/USE-UDEV ]; then
2921	for i in $needed_modules; do
2922	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
2923	gunzip -f $targetdir/$i
2924	fi
2925	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
2926	bunzip2 -f $targetdir/$i
2927	fi
2928	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
2929	unxz -f $targetdir/$i
2930	fi
2931	LogFile "INFO: Uncompressing $i"
2932	done
2933	fi
2934
2935	# Also copy modules.* in case of udev so that normal modprobe works
2936	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$targetdir" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
2937
2938	# Copy FW in case some drivers needs it
2939	for d in "/lib" "/usr/lib"; do
2940	if [ -d "$d/firmware" -a ! -h $d ]; then
2941	cp -a "$d/firmware" "$targetdir$d"
2942	fi
2943	done
2944
2945	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2946	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2947	if [ -d "$d/multipath" -a ! -h $d ]; then
2948	cp -a "$d/multipath" "$targetdir$d"
2949	fi
2950	done
2951
2952	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2953	(cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
2954
2955	# Copy an additional ProLiant tool for OBDR support
2956	if [ -f $MINDI_TMP/OBDR ]; then
2957	found=0
2958	if [ -x /usr/bin/hpsa_obdr_mode ]; then
2959	mkdir -p $targetdir/usr/bin
2960	cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
2961	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2962	found=1
2963	fi
2964	if [ -x /usr/bin/sg_wr_mode ]; then
2965	mkdir -p $targetdir/usr/bin
2966	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2967	LocateDeps $lis > $MINDI_TMP/obdr.lis
2968	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
2969	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2970	found=1
2971	fi
2972	if [ $found -eq 0 ]; then
2973	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2974	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2975	fi
2976	fi
2977
2978	if [ ! -e "/sbin/devfsd" ]; then
2979	LogFile "INFO: Deleting devfsd daemon from ramdisk"
2980	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2981	rm -f $targetdir/sbin/devfsd
2982	fi
2983	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
2984	if [ _"$MONDO_SHARE" != _"" ]; then
2985	MakeMondoConfigFile $targetdir/tmp/$MRCFG
2986	cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
2987	cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
2988	echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
2989	echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
2990	fi
2991
2992	# Create module list to load at restore time
2993	rm -f $targetdir/tmp/modules
2994	for m in $CDROM_MODS; do
2995	echo $m >> $targetdir/tmp/modules
2996	done
2997
2998	mkdir -p $targetdir/proc
2999	LogFile "---------------------------"
3000	LogFile "Content of initial targetdir:"
3001	LogFile "---------------------------- "
3002	(cd "$targetdir" ; ls -Rla ) >> $LOGFILE
3003	LogFile "---------------------------"
3004	}
3005
3006	CleanTargetDir() {
3007	[ "$targetdir" != "/" ] && rm -rf $targetdir
3008	}
3009
3010	PatchBootFiles() {
3011
3012	# Patch the real value of RAMDISK_SIZE now we have it
3013	if [ -d "$bigdir/syslinux" ]; then
3014	find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
3015	fi
3016	if [ -d "$bigdir/EFI" ]; then
3017	find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
3018	fi
3019	for i in `cat $MINDI_TMP/bootf.lis`; do
3020	perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
3021	done
3022	rm -f $MINDI_TMP/bootf.lis
3023
3024	}
3025
3026	MakeBootInitFile() {
3027
3028	local mountpoint tempfile res
3029	tempfile=$MINDI_TMP/temp.rd
3030	res=0
3031
3032	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
3033	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
3034
3035	LogAll "INFO: Creating ext2 filesystem on $tempfile"
3036	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
3037	res=$(($res+$?))
3038
3039	mountpoint=$MINDI_TMP/mountpoint.$$
3040	mkdir -p $mountpoint
3041	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
3042	[ "$targetdir" = "/" ] && echo $targetdir \| grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
3043	mv $targetdir/* $targetdir/.??* $mountpoint \|\| Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
3044	res=$(($res+$?))
3045	rmdir $targetdir
3046
3047	LogFile "INFO: initrd image is $rdz_fname"
3048	# Determine what filesystem to use for initrd image
3049	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
3050	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
3051	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
3052	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
3053	# say what will be used
3054	LogFile "INFO: Creating an $gvFileSystem initrd image..."
3055	# unmount loop filesystem and create image file using the standard approach
3056	sync
3057	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
3058	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
3059	res=$(($res+$?))
3060	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
3061	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
3062	else
3063	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
3064	fi
3065	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
3066	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
3067	res=$(($res+$?))
3068	rm -f ${rdz_fname}.tmp
3069	elif [ "$gvFileSystem" = "initramfs" ]; then
3070	# say what will be used
3071	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
3072	# make sure that cpio is there
3073	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
3074	# create cpio image file and unmount loop filesystem
3075	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
3076	res=$(($res+$?))
3077	sync
3078	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
3079	else
3080	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3081	fi
3082
3083	# log that we are done
3084	if [ "$res" -eq "0" ] ; then
3085	LogAll "INFO: MakeBootInitFile finished without error."
3086	else
3087	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3088	fi
3089
3090	return 0
3091	}
3092
3093
3094	##############################################################################
3095	#----------------------------------- Main -----------------------------------#
3096	##############################################################################
3097
3098	# Now we can create what we need
3099	mkdir -p $MINDI_TMP
3100	export bigdir=$MINDI_TMP/bigdir.$$
3101	export targetdir=$MINDI_TMP/targetdir.$$
3102
3103	# --nolog needs to be first, and is used in analyze-my-lvm
3104	if [ "$1" = "--nolog" ] ; then
3105	shift
3106	LOGFILE=/dev/stderr
3107	else
3108	> $LOGFILE
3109	fi
3110	if [ "$1" = "--printvar" ] ; then
3111	shift
3112	if [ _"$1" != _"" ] ; then
3113	set \| grep -Ew "^$1" \| cut -d= -f2
3114	fi
3115	exit 0
3116	fi
3117
3118	LogFile "mindi v$MINDI_VERSION"
3119	LogFile "-----------------------------"
3120	LogFile "Start date : `date`"
3121	LogFile "-----------------------------"
3122	LogFile "$ARCH architecture detected"
3123	LogFile "mindi called with the following arguments:"
3124	echo "$@">> $LOGFILE
3125	LogFile "-----------------------------"
3126	pbdistrocheck --version \| grep Version >> $LOGFILE
3127	LogFile "pbdistrocheck results:"
3128	pbdistrocheck >> $LOGFILE
3129	LogFile "-----------------------------"
3130	LogFile "MondoRescue perl module:"
3131	mr-getparam --version \| grep Version >> $LOGFILE
3132	LogFile "-----------------------------"
3133
3134	# Log some capital variables
3135	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3136	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3137	LogFile "MONDO_SHARE = $MONDO_SHARE"
3138	LogFile "MINDI_LIB = $MINDI_LIB"
3139	LogFile "MINDI_SBIN = $MINDI_SBIN"
3140	LogFile "MINDI_CONF = $MINDI_CONF"
3141	# Purge from potential old run
3142	if [ _"$MINDI_CACHE" = _"" ]; then
3143	Die "MINDI_CACHE undefined"
3144	else
3145	LogFile "MINDI_CACHE = $MINDI_CACHE"
3146	fi
3147
3148	if [ -f $MINDI_CONFIG ]; then
3149	LogFile "-----------------------------"
3150	LogFile "Mindi configuration file "
3151	LogFile "-----------------------------"
3152	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3153	LogFile "-----------------------------"
3154	fi
3155	LogFile "In Mindi"
3156	LogFile "--------"
3157	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3158	LogFile "--------"
3159
3160	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3161
3162	# Sanity checks
3163	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
3164	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
3165	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3166	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
3167	if which awk &> /dev/null ; then
3168	if ! which gawk &> /dev/null ; then
3169	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3170	fi
3171	fi
3172	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
3173	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3174
3175	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3176
3177	# Update the PATH variable if incomplete
3178	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3179	PATH=$PATH:/sbin:/usr/sbin
3180	export PATH
3181	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3182	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3183	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3184	fi
3185
3186	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3187	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3188	fi
3189
3190	### TODO
3191	### Fix as it's not mandatory on ia64
3192	if [ "$ARCH" = "ia64" ] ; then
3193	if which elilo &> /dev/null ; then
3194	LILO_EXE=elilo
3195	else
3196	LILO_EXE=`which false 2> /dev/null`
3197	fi
3198	else
3199	FindIsolinuxBinary
3200	fi
3201	trap "Aborted" SIGTERM
3202	DONE="\r\t\t\t\t\t\t\t\tDone. "
3203	kernelpath=""
3204	MONDO_ROOT=/var/cache/mondo
3205	mkdir -p $MONDO_ROOT
3206
3207	if [ -d "/proc/lvm" ]; then
3208	# LVM v1
3209	LVMCMD=""
3210	LVM="v1"
3211	elif [ -d "/dev/mapper" ]; then
3212	# LVM v2
3213	LVMCMD="lvm"
3214	LVM="v2"
3215	else
3216	LVM="false"
3217	fi
3218
3219	if [ -e "/proc/cmdline" ]; then
3220	CMDLINE="/proc/cmdline"
3221	elif [ -e "/tmp/cmdline" ]; then
3222	CMDLINE="/tmp/cmdline"
3223	else
3224	CMDLINE="/dev/null"
3225	fi
3226
3227	LogFile "INFO: LVM set to $LVM"
3228	LogFile "----------"
3229	LogFile "mount result:"
3230	LogFile "-------------"
3231	mount >> $LOGFILE
3232	if [ -e "/etc/raidtab" ]; then
3233	LogFile "-------------"
3234	LogFile "/etc/raidtab content:"
3235	LogFile "-------------"
3236	cat /etc/raidtab >> $LOGFILE
3237	else
3238	LogFile "No file /etc/raidtab"
3239	fi
3240	if [ -e "/etc/mdadm.conf" ]; then
3241	LogFile "-------------"
3242	LogFile "/etc/mdadm.conf content:"
3243	LogFile "-------------"
3244	cat /etc/mdadm.conf >> $LOGFILE
3245	else
3246	LogFile "-------------"
3247	LogFile "No file /etc/mdadm.conf"
3248	fi
3249	LogFile "-------------"
3250	LogFile "cat $CMDLINE"
3251	LogFile "-------------"
3252	cat $CMDLINE >> $LOGFILE
3253	LogFile "-------------"
3254	LogFile "cat /proc/swaps:"
3255	LogFile "-------------"
3256	cat /proc/swaps >> $LOGFILE
3257	LogFile "-------------"
3258	if [ -e "/proc/mdstat" ]; then
3259	LogFile "cat /proc/mdstat:"
3260	LogFile "-------------"
3261	cat /proc/mdstat >> $LOGFILE
3262	else
3263	LogFile "No pseudo file /proc/mdstat"
3264	fi
3265	LogFile "-------------"
3266	LogFile "cat /proc/partitions:"
3267	LogFile "-------------"
3268	cat /proc/partitions >> $LOGFILE
3269	LogFile "-------------"
3270	LogFile "cat /proc/filesystems:"
3271	LogFile "-------------"
3272	cat /proc/filesystems >> $LOGFILE
3273	LogFile "-------------"
3274	LogFile "lsmod result:"
3275	LogFile "-------------"
3276	lsmod >> $LOGFILE
3277	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
3278	if [ -x /usr/sbin/esxcfg-module ]; then
3279	LogFile "-------------"
3280	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3281	LogFile "-------------"
3282	LogFile "VMWare modules"
3283	LogFile "-------------"
3284	/usr/sbin/esxcfg-module -l >> $LOGFILE
3285	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
3286	fi
3287	LogFile "-------------"
3288	LogFile "FORCE_MODS:"
3289	LogFile "-------------"
3290	LogFile "$FORCE_MODS"
3291	LogFile "-------------"
3292	LogFile "DENY_MODS:"
3293	LogFile "-------------"
3294	LogFile "$DENY_MODS"
3295	LogFile "-------------"
3296	LogFile "df result:"
3297	LogFile "----------"
3298	df -aT >> $LOGFILE
3299	LogFile "-------------"
3300	LogFile "df -i result:"
3301	LogFile "----------"
3302	df -i >> $LOGFILE
3303	LogFile "-------------"
3304	if [ -r /boot/grub/menu.lst ]; then
3305	LogFile "-------------"
3306	LogFile "INFO: /boot/grub/menu.lst content"
3307	LogFile "-------------"
3308	cat /boot/grub/menu.lst >> $LOGFILE
3309	LogFile "-------------"
3310	fi
3311	if [ -r /boot/grub/grub.conf ]; then
3312	LogFile "-------------"
3313	LogFile "INFO: /boot/grub/grub.conf content"
3314	LogFile "-------------"
3315	cat /boot/grub/grub.conf >> $LOGFILE
3316	LogFile "-------------"
3317	fi
3318	if [ -r /boot/grub/grub.cfg ]; then
3319	LogFile "-------------"
3320	LogFile "INFO: /boot/grub/grub.cfg content"
3321	LogFile "-------------"
3322	cat /boot/grub/grub.cfg >> $LOGFILE
3323	LogFile "-------------"
3324	fi
3325	if [ -r /boot/grub2/grub.cfg ]; then
3326	LogFile "-------------"
3327	LogFile "INFO: /boot/grub2/grub.cfg content"
3328	LogFile "-------------"
3329	cat /boot/grub2/grub.cfg >> $LOGFILE
3330	LogFile "-------------"
3331	fi
3332	if [ -r /boot/grub/device.map ]; then
3333	LogFile "-------------"
3334	LogFile "INFO: /boot/grub/device.map content"
3335	LogFile "-------------"
3336	cat /boot/grub/device.map >> $LOGFILE
3337	LogFile "-------------"
3338	fi
3339	if [ -r /boot/grub2/device.map ]; then
3340	LogFile "-------------"
3341	LogFile "INFO: /boot/grub2/device.map content"
3342	LogFile "-------------"
3343	cat /boot/grub2/device.map >> $LOGFILE
3344	LogFile "-------------"
3345	fi
3346	if [ -r /etc/lilo.conf ]; then
3347	LogFile "-------------"
3348	LogFile "INFO: /etc/lilo.conf content"
3349	LogFile "-------------"
3350	cat /etc/lilo.conf >> $LOGFILE
3351	fi
3352	if [ -d /boot/efi ]; then
3353	gcf=`find /boot/efi -name 'grub.c*'`
3354	if [ _"$gcf" = _"" ]; then
3355	LogFile "Found a /boot/efi directory without a grub config file in it"
3356	else
3357	LogFile "-------------"
3358	LogFile "INFO: $gcf content"
3359	LogFile "-------------"
3360	cat $gcf >> $LOGFILE
3361	LogFile "-------------"
3362	fi
3363	fi
3364
3365	LogFile "Full fdisk info"
3366	LogFile "---------------"
3367	$FDISK -l >> $LOGFILE
3368	LogFile "----------------"
3369
3370	# Compute libata version
3371	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
3372	# If libata v2 is used then remove ide-generic as it will perturbate boot
3373	if [ "`echo $MODULES \| grep libata`" ]; then
3374	if [ "$laver" = "2" ]; then
3375	DENY_MODS="$DENY_MODS ide-generic"
3376	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3377	LogFile "-------------"
3378	fi
3379	fi
3380
3381	# Check for McAfee which disturbs the access to some files (tgz in articular)
3382	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3383	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3384	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3385	LogFile "WARNING: You have two options:"
3386	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3387	LogFile "WARNING: - Disable the scanner during the backup"
3388	fi
3389
3390	#
3391	# If we have a USB device we need to store info
3392	# and remove it from the parameters line
3393	#
3394	if [ "$#" -ne "0" ] ; then
3395	if [ "$1" = "--usb" ] ; then
3396	shift
3397	USBDEVICE=$1
3398	if [ _"$USBDEVICE" = _"" ]; then
3399	Die "No USB device specified"
3400	fi
3401	shift
3402	fi
3403	fi
3404
3405	if [ "$#" -ne "0" ] ; then
3406	if [ "$1" = "--findkernel" ] ; then
3407	resk=`TryToFindKernelPath`
3408	# Avoids logfile content for mondo
3409	export MONDO_SHARE=""
3410	if [ "$resk" = "" ] ; then
3411	if [ $KERNEL_IS_XEN = "yes" ]; then
3412	echo "$xenkernelpath"
3413	LogFile "INFO: xenkernelpath = $xenkernelpath"
3414	MindiExit 0
3415	else
3416	MindiExit -1
3417	fi
3418	else
3419	echo "$resk"
3420	LogFile "INFO: kernelpath = $resk"
3421	MindiExit 0
3422	fi
3423	elif [ "$1" = "--locatedeps" ] ; then
3424	[ ! "$2" ] && Die "Please specify the binary to look at"
3425	LocateDeps $*
3426	# Avoids logfile content for mondo
3427	export MONDO_SHARE=""
3428	MindiExit $?
3429	elif [ "$1" = "--readalllink" ] ; then
3430	[ ! "$2" ] && Die "Please specify the binary to look at"
3431	# Avoids logfile content for mondo
3432	export MONDO_SHARE=""
3433	mr-read-all-link $2
3434	MindiExit $?
3435	elif [ "$1" = "--makebcf" ] ; then
3436	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3437	MakeBootConfFile $2
3438	MindiExit 0
3439	elif [ "$1" = "--makemessage" ] ; then
3440	MakeMessageFile \| cut -c1-80
3441	MindiExit 0
3442	elif [ "$1" = "--makemountlist" ] ; then
3443	[ ! "$2" ] && Die "Please specify the output file"
3444	MakeMountlist $2
3445	CheckMountlist $2
3446	# Avoids logfile content for mondo
3447	export MONDO_SHARE=""
3448	MindiExit $?
3449	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
3450	echo "Mindi v$MINDI_VERSION"
3451	# Avoids logfile content for mondo
3452	export MONDO_SHARE=""
3453	MindiExit 0
3454	elif [ "$1" = "--ironic" ] ; then
3455	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3456	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3457	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3458	#TODO: See how we can influence the boot loader
3459	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3460	if [ "$5" ]; then
3461	boottype=$5
3462	fi
3463	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3464	if [ "$6" ]; then
3465	bootbin=$6
3466	fi
3467	kernelpath=$2
3468	BOOT_TYPE=$4
3469	# Ironic requires some specific boot parameters
3470	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
3471	MINDI_BOOT_TIMEOUT=10
3472	EXTRA_SPACE=1500000
3473	# Get the local improvements to the configuration
3474	if [ -f $MINDI_CONFIG ]; then
3475	. $MINDI_CONFIG
3476	fi
3477	PrepareBootDir
3478	PrepareBigDirTar
3479	CleanBigDir
3480	cp $3 $MINDI_TMP/initrd.img
3481	MakeBootableDevice ISO
3482	MindiExit 0
3483	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3484	MONDO_TMP=$2
3485	# Change MINDI_TMP for the one provided by mondo
3486	# So that it can get back the built files
3487	if [ _"$MONDO_TMP" = _"" ]; then
3488	Die "MONDO_TMP is empty, aborting"
3489	fi
3490	if [ _"$MONDO_TMP" = _"/" ]; then
3491	Die "MONDO_TMP is /, aborting"
3492	fi
3493	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3494	rmdir $MINDI_TMP
3495	export MINDI_TMP=$MONDO_TMP
3496	mkdir -p $MINDI_TMP
3497
3498	# This is the scratch dir in mondo - subdir images
3499	MINDI_CACHE=$3
3500	LogFile "MINDI_CACHE = $MINDI_CACHE"
3501	LogFile "MINDI_TMP = $MINDI_TMP"
3502
3503	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3504	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3505
3506	###
3507	### Sq-Modification...
3508	### Attempt to locate kernel specific module path
3509	### if module path is found then use it other wise use uname -r to set it...
3510	###
3511	if [ $KERNEL_IS_XEN = "yes" ]; then
3512	LogAll "INFO: xenkernelpath = $xenkernelpath"
3513	fi
3514	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
3515	if [ ! -d "/lib/modules/$kernelname" ]; then
3516	LogAll "WARNING: Module path for ${kernelpath} not found..."
3517	LogAll " using running kernel\'s modules."
3518	kernelname=$KERVERRUN
3519	else
3520	LogAll "INFO: Using modules for kernel: ${kernelname}"
3521	fi
3522	LogAll "INFO: kernelname = $kernelname"
3523	LogAll "INFO: kernelpath = $kernelpath"
3524	###
3525	### end of Sq-Modification
3526	###
3527	TAPEDEV=$5
3528	TAPESIZE=$6
3529	FILES_IN_FILELIST=$7
3530	USE_LZO=$8
3531	CDRECOVERY=$9
3532	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
3533	IMAGE_DEVS=""
3534	else
3535	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
3536	fi
3537	if [ "${11}" ] ; then
3538	LILO_OPTIONS=""
3539	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3540	fi
3541	LAST_FILELIST_NUMBER=${12}
3542	ESTIMATED_TOTAL_NOOF_SLICES=${13}
3543	export MINDI_EXCLUDE_DEVS="${14}"
3544	USE_COMP="${15}"
3545	USE_LILO="${16}"
3546	USE_STAR="${17}"
3547	INTERNAL_TAPE_BLOCK_SIZE="${18}"
3548	DIFFERENTIAL="${19}"
3549	USE_GZIP="${20}"
3550	USE_LZMA="${21}"
3551	NOT_BOOT="${22}"
3552	BOOT_TYPE="${23}"
3553	[ "$USE_COMP" = "" ] && USE_COMP=yes
3554	[ "$USE_GZIP" = "" ] && USE_GZIP=no
3555	[ "$USE_LZMA" = "" ] && USE_LZMA=no
3556	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3557	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3558	# MONDO_ROOT is the real scratchdir
3559	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
3560	if [ _"$MONDO_ROOT" != _"" ]; then
3561	mkdir -p $MONDO_ROOT
3562	else
3563	Die "MONDO_ROOT is undefined"
3564	fi
3565	else
3566	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3567	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
3568	LogScreen " mindi --locatedeps file"
3569	LogScreen " mindi --makemessage"
3570	LogScreen " mindi --findkernel"
3571	LogScreen " mindi --makemountlist file"
3572	LogScreen " mindi --makebcf bootloader"
3573	LogScreen " mindi -V"
3574	MindiExit -1
3575	fi
3576	fi
3577
3578	if [ _"$MINDI_CACHE" != _"" ]; then
3579	rm -rf $MINDI_CACHE/* 2> /dev/null
3580	mkdir -p $MINDI_CACHE
3581	fi
3582
3583	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
3584
3585	if [ _"$MONDO_SHARE" = _"" ]; then
3586	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3587	LogAll "Latest Mindi is available from http://www.mondorescue.org"
3588	LogAll "BusyBox sources are available from http://www.busybox.net"
3589	LogAll "------------------------------------------------------------------------------"
3590	else
3591	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3592	fi
3593	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3594	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
3595	else
3596	LogAll "ERROR: Unable to find mindi-busybox, please install it"
3597	MindiExit -1
3598	fi
3599
3600	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3601	modinfo $i 2> /dev/null 1> /dev/null
3602	if [ $? -eq 0 ]; then
3603	modprobe $i 2>&1 > /dev/null
3604	fi
3605	done
3606
3607	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3608	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3609	LogFile "NOT_BOOT = '$NOT_BOOT'"
3610	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3611	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3612	MakeMondoConfigFile $MINDI_TMP/$MRCFG
3613	MakeMountlist $MINDI_TMP/mountlist.txt
3614	CheckMountlist $MINDI_TMP/mountlist.txt
3615	mkdir -p $MINDI_TMP/small-all/tmp
3616	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
3617	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3618	sleep 2
3619	LogAll "Done. Exiting."
3620	MindiExit 0
3621	fi
3622
3623	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3624	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3625	fi
3626
3627	if [ "$kernelpath" = "" ] ; then
3628	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3629	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3630	read ch
3631	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3632	USE_OWN_KERNEL="yes"
3633	else
3634	USE_OWN_KERNEL="no"
3635	fi
3636	if [ "$USE_OWN_KERNEL" = "yes" ]; then
3637	kernelpath=`TryToFindKernelPath`
3638	if [ "$kernelpath" = "" ] ; then
3639	echo -n "Please enter kernel path : "
3640	read kernelpath
3641	fi
3642	fi
3643	fi
3644
3645	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3646	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3647
3648	PrepareBigDir
3649	bigdir_size=`du -sk $bigdir \| cut -f1`
3650	LogFile "---------------------------"
3651	LogFile "INFO: bigdir size is $bigdir_size KB"
3652
3653	PrepareTargetDir \|\| Die "Could not create initrd.img in target dir"
3654	targetdir_size=`du -sk $targetdir \| cut -f1`
3655	LogFile "---------------------------"
3656	LogFile "INFO: targetdir size is $targetdir_size KB"
3657	LogFile "---------------------------- "
3658
3659	# Now we can compute it correctly with some extra in case of...
3660	export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
3661	# And now we can patch the value in conf files
3662	PatchBootFiles
3663	# And tar them
3664	PrepareBigDirTar
3665	# And prepare boot setup
3666	MakeBootInitFile
3667	# Now cleans up stuff
3668	CleanBigDir
3669	CleanTargetDir
3670
3671	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3672	...Or type 'memtest' to test your machine's RAM thoroughly.\n"
3673
3674	if [ _"$MONDO_SHARE" = _"" ]; then
3675	OfferToMakeBootableISO
3676	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3677	OfferToMakeBootableUSB
3678	fi
3679	LogAll "INFO: Mindi Finished"
3680	elif [ "$TAPEDEV" ] ; then
3681	if [ "$ARCH" != "ia64" ] ; then
3682	# We need to keep the img file as boot file for ia64 platform
3683	rm -f $MINDI_CACHE/{img,iso}
3684	else
3685	rm -f $MINDI_CACHE/*iso
3686	fi
3687	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3688	OfferToMakeBootableUSB
3689	fi
3690	OfferToMakeBootableISO
3691	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3692	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3693	else
3694	Die "Cannot find all.tar.gz, to be written to tape"
3695	fi
3696	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3697	OfferToMakeBootableUSB
3698	else
3699	OfferToMakeBootableISO
3700	fi
3701
3702	if [ -f $MINDI_TMP/$MRCFG ]; then
3703	LogFile "INFO: Your $MRCFG file is:"
3704	LogFile "--------------------------"
3705	cat $MINDI_TMP/$MRCFG >> $LOGFILE
3706	LogFile "--------------------------"
3707	else
3708	if [ _"$MONDO_SHARE" != _"" ] ; then
3709	LogAll "ERROR: You don't have a $MRCFG file !"
3710	fi
3711	fi
3712	# cleanup
3713	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: