Context Navigation

source: MondoRescue/branches/3.2/mindi/rootfs/etc/init.d/rcS@ 3285

Visit:

Last change on this file since 3285 was 3285, checked in by Bruno Cornec, 10 years ago
Seems systemd also needs cgroup in some way. Starting to test...
Property svn:keywords set to `Id`
File size: 31.4 KB

Rev	Line
[3274]	1	#!/bin/bash
[1]	2	#
[736]	3	# $Id: rcS 3285 2014-05-01 09:39:45Z bruno $
[1]	4	#
[736]	5	# init script launched during the restore process
[1]	6	#------------------------------------------------------------
	7
	8	CaughtSoftReset() {
[1747]	9	trap SIGTERM
[2890]	10
[2893]	11	reboot
[1]	12	}
	13
	14
	15	ConfigureLoggingDaemons() {
[1747]	16	echo -en "Running klogd..."
	17	klogd -c 2 > /dev/null 2> /dev/null
	18	echo -en "Done.\nRunning syslogd..."
	19	syslogd > /dev/null 2> /dev/null
	20	echo "Done."
	21	LogIt "klogd and syslogd have been started."
[1]	22	}
	23
	24
	25
	26	CopyBootDevEntry() {
[1747]	27	local outfile devfile
	28	devfile=/dev/boot_device
	29	outfile=`cat /BOOTLOADER.DEVICE 2> /dev/null`
	30	[ ! "$outfile" ] && return 0
	31	echo -en "Copying boot device to $outfile..."
	32	if [ -e "$outfile" ] ; then
[2174]	33	echo "not needed."
[1410]	34	return 0
[1747]	35	fi
	36	mkdir -p $outfile
	37	rmdir $outfile
	38	cp -pRdf $devfile $outfile
	39	if [ "$?" -ne "0" ] ; then
[1410]	40	echo "Failed."
	41	return 1
[1747]	42	else
[1410]	43	echo "OK."
	44	return 0
[1747]	45	fi
[1]	46	}
	47
	48
[2888]	49	GetShell() {
	50	echo -en "Type 'exit' to reboot the PC\n"
	51	umount -d /mnt/cdrom 2> /dev/null
	52	mount / -o rw,remount > /dev/null 2> /dev/null
[3051]	53	for i in `cat /proc/cmdline`; do
[3247]	54	echo $i \| grep -qi console= && console=`echo $i \| cut -d= -f2`
	55	echo $i \| grep -qi serial= && serial=`echo $i \| cut -d= -f2`
	56	done
	57	LogIt "Launching Shell"
	58	if [[ $serial != "" && -e $serial ]]; then
	59	setsid sh -c "exec sh <$serial >$serial 2>&1"
	60	elif [[ $console != "" && -e /dev/$console ]]; then
	61	setsid sh -c "exec sh </dev/$console >/dev/$console 2>&1"
	62	else
	63	setsid sh -c "exec sh </dev/tty1 >/dev/tty1 2>&1"
	64	fi
[2888]	65	}
[1]	66
[2888]	67
[1]	68	Die() {
[1747]	69	LogIt "Fatal error! $1" 1
[2888]	70	GetShell
[1]	71	}
	72
	73
	74	ExtractDevTarballs() {
[1747]	75	cd /
[3277]	76	if [ -x /usr/lib/systemd/systemd-udevd ]; then
	77	# Just use vc dev files. The other are useless and create huge delays with LVM
	78	tar -zxf /vc.tgz \|\| LogIt "Error occurred while extracting /vc.tgz"
	79	else
	80	for fname in ataraid.tgz ida.tgz i2o.tgz rd.tgz raw.tgz cciss.tgz nst.tgz dm.tgz vc.tgz ; do
	81	if [ ! -e "/$fname" ] ; then
	82	LogIt "/$fname not found; cannot extract to /." 1
	83	else
	84	echo -en "\rExtracting /$fname... "
	85	tar -zxf /$fname \|\| LogIt "Error occurred while extracting /$fname"
	86	fi
	87	done
	88	fi
[1747]	89	echo -en "\r"
	90	LogIt "Extracted additional /dev entries OK. " 1
[1]	91	}
	92
	93
	94
	95	LaunchTerminals() {
[2727]	96	# Depending on busybox version, syntax of openvt is different
	97	/bin/busybox --help 2>&1 \| head -1 \| grep -Eq "1\.7\.3\|1\.2\."
	98	if [ "$?" -eq "0" ] ; then
	99	opt=""
	100	else
	101	# 1.18.3 requires -c
	102	opt="-c"
	103	fi
[3278]	104	echo "Launching terminals on other ttys - Use ALT+F[2-6] to use them"
[2727]	105	openvt $opt 2 /bin/sh
	106	openvt $opt 3 /bin/sh
	107	openvt $opt 4 /bin/sh
	108	openvt $opt 5 /bin/sh
	109	openvt $opt 6 /bin/sh
	110	openvt $opt 7 /bin/sh /sbin/wait-for-petris
	111	openvt $opt 8 /usr/bin/tail -f $LOGFILE
[3274]	112	if [ -f /var/log/messages ]; then
	113	openvt $opt 9 /usr/bin/tail -f /var/log/messages
	114	fi
[1922]	115	# May avoid shell error messages
	116	chmod 666 /dev/tty* /dev/console
[2484]	117	# By default first serial line is configured as tty
[3274]	118	# Required to have a correct serial console support (MP on ia64 or VSP with iLO e.g.)
[2484]	119	for i in `cat /proc/cmdline` ; do
[3200]	120	echo $i \| grep -qi serial= && serial=`echo $i \| cut -d= -f2`
[2484]	121	done
[2487]	122	# Doing that is only valid when using a real serial line
[3274]	123	if [[ $serial != "" && -e $serial ]]; then
[2498]	124	LogIt "Redirecting serial $serial to /dev/tty" 1
[2487]	125	ln -s -f $serial /dev/tty
	126	fi
[1]	127	}
	128
	129
	130	LoadKeymap() {
[1747]	131	local fname
[3282]	132	fname=`grep keymap-lives-here /tmp/mondorestore.cfg \| cut -f2 -d' ' 2> /dev/null`
[1747]	133	[ "$fname" = "" ] && return
	134	if which loadkeys > /dev/null 2> /dev/null ; then
	135	loadkeys $fname
[2846]	136	LogIt "Using $fname keyboard map." 1
[1747]	137	else
[2731]	138	LogIt "Using default US keyboard map." 1
[1747]	139	fi
[1]	140	}
	141
	142
	143	UntarTapeStuff() {
[1747]	144	local old_pwd res
	145	old_pwd=`pwd`
	146	cd $GROOVY
	147	[ "$1" != "" ] && tapedev=$1
[3274]	148	[ ! "$tapedev" ] && tapedev=`grep media-dev /tmp/mondorestore.cfg 2>/dev/null \| tr -s ' ' ' ' \| cut -d' ' -f2`
[1962]	149	mt -f $tapedev rewind
[3119]	150	if [ $? -ne 0 ]; then
	151	LogIt "WARNING: $tapedev failed to rewind, either not a tape or still in OBDR mode." 1
	152	LogIt " Trying to find the corresponding SCSI generic device." 1
	153	c=0
	154	for d in `ls /sys/class/scsi_device/*`; do
	155	devtype=`cat $d/device/type`
[3153]	156	if [ "$devtype" -eq "1" ]; then
[3119]	157	LogIt "NOTE: Device /dev/sg$c is a Sequential device." 1
	158	if [ -x /usr/bin/sg_map ]; then
	159	dev=`/usr/bin/sg_map \| grep -E "^/dev/sg$c" \| awk '{print $2}'`
	160	LogIt " Retry using device $dev" 1
	161	fi
[3153]	162	elif [ "$devtype" -eq "0" ]; then
[3119]	163	# Skipping a HDD
[3135]	164	/bin/true
[3153]	165	elif [ "$devtype" -eq "5" ]; then
[3119]	166	# Checking whether it's a CD or a tape in OBDR mode
	167	grep -q -i -E 'dat\|ultrium\|tape' $d/device/model
	168	if [ $? -eq 0 ]; then
	169	# Is probably a Tape drive left in OBDR.
	170	LogIt "Found that /dev/sg$c is a tape drive (`cat $d/device/model`)." 1
	171	grep -q -i -w 'hp' $d/device/vendor
	172	if [ $? -eq 0 ]; then
	173	LogIt "This is an HP tape drive, even better :-)." 1
	174	fi
	175	if [ -x /usr/bin/sg_reset ]; then
	176	OBDR_MODS="st mptsas mptspi aic7xxx aic94xx mpt2sas "
	177	if [ "`grep -i obdrmods /proc/cmdline`" ]; then
	178	OBDR_MODS="$OBDR_MODS `cat /proc/cmdline \| sed 's~.obdrmods=\"\(.\)\".*~\1~'`"
	179	fi
	180	LogIt "Removing modules $OBDR_MODS." 1
	181	for m in $OBDR_MODS; do
	182	rmmod $i
	183	done
	184	LogIt "Trying to force device /dev/sg$c to be in sequential mode." 1
	185	/usr/bin/sg_reset -d /dev/sg$c
	186	LogIt "Inserting modules `rev $OBDR_MODS`." 1
	187	for m in `rev $OBDR_MODS`; do
	188	modprobe $i
	189	done
	190	LogIt "Retry again as the device has been set back into sequential mode." 1
	191	mt -f $tapedev fsf 2
	192	res=$?
	193	# exit the loop to continue and return if that previous mt failed.
	194	# If it succeeded we transparently continue !!
	195	break
	196	else
	197	LogIt "WARNING: Unable to reset /dev/sg$c as the sg_reset command is not availble." 1
	198	fi
	199	fi
	200	else
	201	LogIt "Device /dev/sg$c has an unknown type $devtype." 1
	202	fi
	203	c=`expr $c + 1`
	204	done
	205
	206	if [ $res -ne 0 ]; then
	207	cd $old_pwd
	208	return $res
	209	fi
	210	fi
	211
[1958]	212	mt -f $tapedev fsf 2
[2915]	213	# 32k is DEFAULT_INTERNAL_TAPE_BLOCK_SIZE
	214	mt -f $tapedev setblk 32768
[1747]	215	dd if=$tapedev bs=32k count=1024 \| tar -zx
	216	res=$?
	217	if [ "$res" -eq "0" ] ; then
[1958]	218	# Store the dev name in case we changed it interactively
[3274]	219	if [ -f "/tmp/mondorestore.cfg" ]; then
	220	sed -i "s/^media-dev .*$/media-dev $tapedev/" /tmp/mondorestore.cfg
[1983]	221	fi
[1747]	222	fi
	223	cd $old_pwd
	224	return $res
[1]	225	}
	226
	227	HandleTape() {
[1747]	228	local res tapedev
	229	tapedev="" ; # will be set by UntarTapeStuff()
[1963]	230
[1968]	231	# Here we can add the USB storage module, it's working even with OBDR !
[2964]	232	modprobe -q usb-storage 2> /dev/null
[1968]	233	# Tape takes some time to appear
	234	sleep 10
[1747]	235	cd $GROOVY
[1958]	236	UntarTapeStuff $tapedev
[1747]	237	res=$?
[3124]	238	tapedev="default tape device"
[1747]	239	while [ "$res" -ne "0" ] ; do
	240	LogIt "$tapedev failed to act as extended data disk for booting." 1
[3124]	241	LogIt "Please specify an alternate non-rewinding tape device, such as /dev/nst0" 1
[1885]	242	LogIt "or hit <Enter> to boot from another media." 1
[1747]	243	echo -en "---> "
	244	read tapedev
	245	if [ "$tapedev" ] ; then
	246	LogIt "User specified $tapedev instead"
	247	UntarTapeStuff $tapedev
	248	res=$?
	249	else
	250	LogIt "User opted not to specify an alternate tapedev"
	251	res=1
[1]	252	break
[1747]	253	fi
	254	done
[1962]	255	# For post-init
	256	export TAPEDEV=$tapedev
[1]	257
[1747]	258	if [ "$res" -ne "0" ] ; then
[1410]	259	cd /
[1885]	260	LogIt "Failed to use tape as extended datadisk. Reverting to another media." 1
	261	HandleCDROM
[1410]	262	res=$?
[1747]	263	else
[1410]	264	LogIt "Using tape as extended datadisk. Good." 3
	265	echo "Using tape as extd ddisk." > /tmp/TAPEDEV-HAS-DATA-DISKS
	266	res=0
[1747]	267	CD_MOUNTED_OK=yes
	268	fi
	269	return $res
[1]	270	}
	271
	272
	273
[1885]	274	HandleCDROM() {
[1825]	275	# Just in case we have an iLO ensure we will map it correctly
[1830]	276	echo "$DENY_MODS" \| grep -q "usb-storage "
[1829]	277	if [ $? -eq 0 ]; then
	278	return
	279	fi
[1826]	280	echo "Activating a potential USB Storage device"
[2964]	281	modprobe -q usb-storage 2> /dev/null
[1826]	282	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	283	sleep 1
	284	echo -en "."
	285	done
[1825]	286
[1747]	287	find-and-mount-cdrom
	288	res=$?
	289	if [ "$res" -ne "0" ] ; then
[898]	290	LogIt "First call to find-and-mount-cdrom failed." 1
	291	LogIt "Sleeping for 3 seconds and trying again." 1
	292	sleep 3
	293	find-and-mount-cdrom
	294	res=$?
[1747]	295	fi
	296	if [ "$res" -eq "0" ] ; then
[3274]	297	LogIt "OK, I am running on a CD-ROM. Good." 1
[1747]	298	CD_MOUNTED_OK=yes
	299	else
[3274]	300	LogIt "You probably not have the right drivers" 1
	301	LogIt "to support the hardware on which we are running" 1
	302	LogIt "Your archives are probably fine but" 1
	303	LogIt "your tape streamer and/or CD-ROM drive are unsupported at that point." 1
[898]	304	CD_MOUNTED_OK=""
[1747]	305	fi
	306	return 0
[1]	307	}
	308
	309
	310	PauseForRaids() {
[1747]	311	if [ "`dmesg \| grep -i "RAID Controller"`" != "" ] \|\| [ "`dmesg \| grep -i "Vendor: 3ware"`" != "" ] ; then
	312	LogIt "RAID controller(s) detected. Pausing 10 seconds to let them warm up." 1
	313	echo -en "Pausing..."
	314	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	315	sleep 1
	316	echo -en "$(($i*10))%..."
	317	done
	318	echo "Done."
	319	fi
[1]	320	}
	321
	322
	323	# 06/13/2002 --- DuckX's & Hugo's new routine
	324	# 10/11/2003 --- added a simple devfsd.conf file
	325	# 01/24/2005 --- cater for arbitrary locations of devfsd.conf by using the
	326	# config file path compiled into devfsd
	327	RunDevfsd() {
[1747]	328	loc=`which devfsd 2> /dev/null`
	329	if [ "$loc" != "" ] ; then
[1]	330	LogIt "Devfs found. Testing kernel support..."
	331	if [ ! -e "/dev/.devfsd" ] ; then
[746]	332	mount -t devfs devfs /dev 2>> $LOGFILE
[3274]	333	if [ "$?" -ne "0" ] ; then
	334	LogIt "Error while trying to mount devfs"
[1]	335	else
[3274]	336	LogIt "Devfs mounted OK"
[1]	337	fi
	338	fi
	339	#check if the kernel supports devfs
	340	if [ -e "/dev/.devfsd" ] ; then
	341	[ -d "/proc/1" ] \|\| mount -n /proc
	342	LogIt "Kernel support found. Creating config file and starting devfsd"
[911]	343	conffile=`strings $loc \| grep -E "devfsd.conf$"`
[1]	344	[ "$conffile" ] \|\| conffile="/etc/devfsd.conf"
	345	confpath=`echo $conffile \| sed "s/\/devfsd\.conf$//"`
	346	[ -d "$confpath" ] \|\| mkdir -p $confpath
	347	echo -en "REGISTER .* MKOLDCOMPAT\nUNREGISTER .* RMOLDCOMPAT\n" > $conffile
	348	devfsd /dev &
	349	sleep 5
	350	else
	351	LogIt "No devfs kernel support."
	352	fi
[1747]	353	fi
[1]	354	}
	355
[1718]	356	# Taken from udev management in Mandriva 2008.0. Kudos guys
[2845]	357	MakeExtraNodes () {
[1718]	358	# there are a few things that sysfs does not export for us.
	359	# these things are listed in /etc/udev/links.conf
	360	grep '^[^#]' /etc/udev-links.conf \| \
	361	while read type name arg1; do
	362	[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] \|\|continue
	363	case "$type" in
	364	L) ln -s $arg1 /dev/$name ;;
	365	D) mkdir -p /dev/$name ;;
[1719]	366	M) mknod /dev/$name $arg1 && chmod 600 /dev/$name;;
	367	*) echo "udev-links.conf: unparseable line (%s %s %s)\n" "$type" "$name" "$arg1" ;;
[1718]	368	esac
	369	done
	370	}
	371
[2845]	372	CreateDevMakedev() {
[1792]	373	if [ -e /sbin/MAKEDEV ]; then
	374	ln -sf /sbin/MAKEDEV /dev/MAKEDEV
	375	else
	376	ln -sf /bin/true /dev/MAKEDEV
	377	fi
	378	}
[1718]	379
[1716]	380	RunUdevd() {
[3274]	381	# Initial Inspiration from Mandriva 2008.0 startup script
	382	LogIt "Preparing udev environment..." 1
[1718]	383	mv /dev /dev.static
	384	mkdir /dev
	385	mount -n -o size=5M,mode=0755 -t tmpfs none /dev
[2845]	386	MakeExtraNodes
[1718]	387	mount -n -t devpts -o mode=620 none /dev/pts
	388	mount -n -t tmpfs none /dev/shm
[1789]	389	if [ -e /proc/sys/kernel/hotplug ]; then
	390	echo > /proc/sys/kernel/hotplug
	391	fi
[1734]	392	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	393	echo 0 > /proc/sys/kernel/printk
[2081]	394	# Many possibilities depending on udev versions
[1759]	395	if [ -x /sbin/startudev ]; then
	396	/sbin/startudev
	397	fi
[2081]	398	if [ -x /sbin/start_udev ]; then
	399	/sbin/start_udev
	400	fi
[1759]	401	# Depending on udevd version it gives back the hand or not :-(
[2673]	402	ps \| grep -v grep \|grep udevd 2> /dev/null 1> /dev/null
[2437]	403	if [ $? -ne 0 ]; then
[3277]	404	echo "Waiting for udev to start..."
[2965]	405	if [ -x /sbin/udevd ]; then
	406	/sbin/udevd --daemon &
	407	elif [ -x /usr/bin/udevd ]; then
	408	/usr/bin/udevd --daemon &
[3172]	409	elif [ -x /usr/lib/systemd/systemd-udevd ]; then
[3274]	410	# from https://github.com/hut/minirc/blob/master/rc
[3277]	411	echo "INFO: This is the systemd version of udev"
[3274]	412	mkdir -p /run/systemd/journal
[3285]	413	mount -n -t tmpfs tmpfs /sys/fs/cgroup
	414	#mount -n -t cgroup cgroup /sys/fs/cgroup/systemd
[3274]	415	/usr/lib/systemd/systemd-udevd --daemon
	416	udevadm trigger --action=add --type=subsystems
	417	udevadm trigger --action=add --type=devices
[2965]	418	fi
[2437]	419	sleep 5
[3274]	420	LogIt "udev started manually" 1
[2437]	421	fi
[1792]	422	mkdir -p /dev/.udev/queue/
[1789]	423	if [ -x /sbin/udevtrigger ]; then
	424	/sbin/udevtrigger
	425	fi
[2442]	426	echo "Waiting for udev to discover..."
[2845]	427	CreateDevMakedev
[2182]	428	# Newer version use udevadm for that
[2437]	429	if [ -x /sbin/udevsettle ]; then
[2442]	430	/sbin/udevsettle --timeout=10
[2846]	431	LogIt "Discovering with udevsettle"
[2965]	432	elif [ -x /sbin/udevadm ] \|\| [ -x /usr/bin/udevadm ]; then
	433	ua=`UdevadmTrigger`
	434	$ua settle --timeout=10
[2846]	435	LogIt "Discovering with udevadm"
[1816]	436	fi
[1824]	437	# It seems we need to have more static devs on some distro were
	438	# udev as some other requirements to be covered later on.
	439	# So in the mean time:
	440	for d in `ls /dev.static`; do
	441	if [ ! -e /dev/$d ]; then
	442	mv /dev.static/$d /dev
	443	fi
	444	done
[1816]	445	echo $PKLVL > /proc/sys/kernel/printk
[1716]	446	}
[1]	447
[1761]	448	RstHW() {
[1]	449
[1761]	450	# Restore the HW configuration if available (NOT by default)
	451	answer="NO"
[1]	452
[1815]	453	grep -q nohw /proc/cmdline
	454	if [ "$?" -eq 0 ]; then
	455	return
	456	fi
[1761]	457	if [ -x ./mindi-rsthw ]; then
	458	grep -q RESTORE /proc/cmdline
	459	if [ "$?" -ne 0 ]; then
[1815]	460	#clear
[1761]	461	echo "*********************************************************************"
	462	echo "Do you want to restore the HW configuration of the original machine ?"
	463	echo "(This may dammage your hardware so be sure to check twice before saying yes)"
	464	echo "*********************************************************************"
	465	echo "Please confirm by typing YES exactly as written here (NO by default)"
	466	echo -n "--> "
	467	read answer
	468	else
	469	answer="YES"
	470	fi
[1910]	471	if [ "$answer" = "YES" ] ; then
[1761]	472	./mindi-rsthw
	473	fi
	474	fi
	475	}
[1]	476
[1761]	477
[1787]	478	StartUSBKbd() {
	479	# Prepare minimal USB env in case we have USB kbd such as with iLO
	480	[ -d /proc/bus/usb ] && ! grep -q /proc/bus/usb /proc/mounts && mount -t usbfs none /proc/bus/usb
[1830]	481	echo "$DENY_MODS" \| grep -Eq 'uhcd_hci \|usbhid \|usbcore '
[1829]	482	if [ $? -eq 0 ]; then
	483	return
	484	fi
[2964]	485	modprobe -q uhcd_hci 2> /dev/null
	486	modprobe -q usbhid 2> /dev/null
[1787]	487	}
[1]	488
	489
[1787]	490
[1]	491	StartLvms() {
[2477]	492	if [ "`grep -i nolvm /proc/cmdline`" ]; then
	493	return;
	494	fi
[1747]	495	if [ -e "/tmp/i-want-my-lvm" ] ; then
[3274]	496	# Recent LVM need this caching daemon to work
	497	if [ -x /usr/sbin/lvmetad ]; then
[3277]	498	mkdir -p /run/lvm
[3274]	499	/usr/sbin/lvmetad
	500	fi
[1747]	501	LogIt "Scanning LVM's..." 1
[739]	502	if which lvm ; then
[2964]	503	modprobe -q dm-mod 2> /dev/null
	504	modprobe -q dm_mod 2> /dev/null
[2845]	505	lvm vgscan --mknodes
[739]	506	else
[2845]	507	vgscan
[739]	508	fi
[2533]	509
	510	# Exclude devices we may not want
	511	rm -f /tmp/restorevgs
[2564]	512	for d in $MINDI_EXCLUDE_DEVS ; do
[2580]	513	echo "LVM exclusion == $d"
[2533]	514	EXCLUDE_VGS=`grep " $d" /tmp/i-want-my-lvm \| grep vgcreate \| awk '{print $4}'`
	515	vg=`echo $EXCLUDE_VGS \| sed "s/ /\|/g"`
	516	if [ "$vg" != "" ]; then
	517	re=" $d\|$vg"
	518	else
	519	re=" $d"
	520	fi
	521	# Remove VGs from i-want-my-lvm
	522	grep -Ev "$re" /tmp/i-want-my-lvm > /tmp/i-want-my-lvm.new
	523	mv /tmp/i-want-my-lvm.new /tmp/i-want-my-lvm
	524	# Prepare script to restore the VG exluded here if needed
	525	for v in $EXCLUDE_VGS; do
	526	echo "vgcfgrestore $v" >> /tmp/restorevgs
	527	# Remove LVs from mountlist
	528	EXCLUDE_LVS=`grep " $v" /tmp/i-want-my-lvm \| grep lvcreate \| sed "s/^.-n \([^ ][^ ]\) .*$/$1/"`
	529	for l in $EXCLUDE_LVS; do
[2535]	530	# FIXME: Should search for all possible device names here
[3203]	531	if [ -f "/tmp/mountlist.txt" ]; then
	532	grep -Ev "/dev/$v/$l" /tmp/mountlist.txt > /tmp/mountlist.txt.new
	533	grep -Ev "/dev/mapper/${v}-$l" /tmp/mountlist.txt.new > /tmp/mountlist.txt
	534	fi
[2533]	535	done
	536	done
	537	done
	538
[1747]	539	grep -E "^#.vgchange" /tmp/i-want-my-lvm \| sed "s/^#[ ]//" > /tmp/start-lvm
	540	chmod +x /tmp/start-lvm
	541	echo -en "Starting LVM's..."
	542	/tmp/start-lvm &
	543	for i in 1 2 3 4 5 ; do
[2845]	544	echo -en "."
	545	sleep 1
[1747]	546	done
	547	echo "Done."
	548	fi
[1]	549	# If necessary, cannibalize 'analyze-my-lvm'; copy some of its code here,
	550	# pipe vgscan's output, strip it, run 'vgchange' on its output, etc.etc.
[1747]	551	LogIt "LVM's have been started."
[1]	552	}
	553
[2177]	554	StartPowerPath() {
[1]	555
[2177]	556	# Taken from the init script of EMC PowerPath on RHEL
[2845]	557	if [ -f /etc/emcp_devicesDB.dat ]; then
	558	if [ -f /etc/emcp_devicesDB.idx ]; then
	559	/etc/opt/emcpower/emcpmgr map -p > /dev/null 2>&1
	560	fi
	561	fi
[2177]	562
[2845]	563	/sbin/powermt config > /dev/null 2>&1
	564	# Wait for udev to finish creating emcpower devices
	565	#
	566	pdfound=1
	567	for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
	568	pdfound=1
	569	for pd in `/bin/ls -d /sys/block/emcpower* 2> /dev/null`; do
	570	bpd=`basename $pd`
	571	if [ ! -e /dev/$bpd ]; then
	572	pdfound=0
	573	sleep 2
	574	break;
	575	fi
	576	done
	577	if [ "$pdfound" -eq 1 ]; then
[2177]	578	break
[2845]	579	fi
	580	done
	581	if [ "$pdfound" -eq 0 ]; then
	582	echo "Unable to start PowerPath"
	583	fi
[2177]	584
[2845]	585	/sbin/powermt load > /dev/null 2>&1
	586	/etc/opt/emcpower/emcpmgr map > /dev/null 2>&1
	587	/etc/opt/emcpower/powercf -C > /dev/null 2>&1
	588	if [ ! -e /etc/powermt.custom ]; then
	589	/sbin/powermt save > /dev/null 2>&1
	590	fi
	591	/sbin/powermt register > /dev/null 2>&1
	592	/sbin/powermig transition -startup -noprompt > /dev/null 2>&1
[2177]	593	}
	594
[2072]	595	StartMpath() {
	596	if [ "`grep -i nompath /proc/cmdline`" ]; then
	597	return;
	598	fi
[3203]	599	if [ -f "/tmp/mountlist.txt" ] && [ "`grep mpath /tmp/mountlist.txt`" ]; then
[2353]	600	if [ -x /sbin/multipath ]; then
	601	echo "Starting Mpath..."
	602	mkdir -p /var/lib/multipath
	603	cat > /etc/multipath.conf << EOF
[2072]	604	defaults {
	605	user_friendly_names yes
	606	}
	607	EOF
[2353]	608	/sbin/multipath -v 0
	609	if [ -x /sbin/kpartx ]; then
	610	/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
	611	fi
[2846]	612	LogIt "Multipath started"
[2072]	613	fi
	614	fi
	615	}
	616
[1]	617	StartRaids() {
[1747]	618	local raid_devices i
[1273]	619
[2353]	620	if [ "`grep -i noraid /proc/cmdline`" ]; then
	621	return;
	622	fi
	623
[3203]	624	if [ -f "/tmp/mountlist.txt" ]; then
	625	raid_devices=`grep /dev/md /tmp/mountlist.txt \| cut -d' ' -f1`
	626	else
	627	raid_devices=""
	628	fi
	629
[623]	630	if which raidstart > /dev/null 2> /dev/null ; then
[1747]	631	for i in $raid_devices ; do
	632	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	633	LogIt "$i is started already; no need to run 'raidstart $i'" 1
	634	else
[623]	635	LogIt "Running 'raidstart $i'" 1
	636	raidstart $i
[1747]	637	fi
	638	done
[623]	639	elif which mdrun > /dev/null 2> /dev/null ; then
[2353]	640	if [ "`grep -i nomd /proc/cmdline`" ]; then
	641	return;
	642	fi
[623]	643	LogIt "Running 'mdrun'" 1
	644	mdrun
[1273]	645	elif which mdadm > /dev/null 2> /dev/null ; then
[2353]	646	if [ "`grep -i nomd /proc/cmdline`" ]; then
	647	return;
	648	fi
[1273]	649	LogIt "Running 'mdadm'" 1
	650	for i in $raid_devices ; do
[1747]	651	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	652	LogIt "$i is started already; no need to run 'mdadm $i'" 1
	653	else
[1610]	654	if [ -f /etc/mdadm.conf ] ; then
	655	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm.conf" 1
	656	mdadm -A $i -c /etc/mdadm.conf
	657	elif [ -f /etc/mdadm/mdadm.conf ] ; then
	658	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm/mdadm.conf" 1
	659	mdadm -A $i -c /etc/mdadm/mdadm.conf
	660	else
	661	LogIt "Running 'mdadm $i'" 1
	662	mdadm -Ac partitions -m dev $i
	663	fi
[1747]	664	fi
	665	done
[2075]	666	elif which dmraid > /dev/null 2> /dev/null ; then
[2072]	667	if [ "`grep -i nodmraid /proc/cmdline`" ]; then
	668	return;
	669	fi
	670	for x in $(/sbin/dmraid -ay -i -p -t 2>/dev/null \| grep -E -iv "^no " \|awk -F ':' '{ print $1 }') ; do
	671	echo "Please send the result of /sbin/dmraid -ay -i -p -t to the devteam !!!"
	672	return
	673	#dmname=$(resolve_dm_name $x)
	674	#[ -z "$dmname" ] && continue
	675	#/sbin/dmraid -ay -i -p "$dmname" >/dev/null 2>&1
	676	#/sbin/kpartx -a -p p "/dev/mapper/$dmname"
	677	done
[623]	678	else
	679	LogIt "Warning: Neither 'raidstart' nor 'mdrun''found. RAID devices may not have started." 1
	680	fi
	681
[1]	682	}
	683
	684
	685	TryAgainToFindCD() {
[1747]	686	local res
	687	mount \| grep /mnt/cdrom && return 0
[3274]	688	[ "`grep "backup_media_type" /tmp/mondorestore.cfg 2> /dev/null \| grep "cdstream"`" ] && return
[1747]	689	LogIt "Trying to mount CD-ROM a 2nd time..."
	690	find-and-mount-cdrom --second-try
	691	res=$?
	692	if [ "$res" -eq "0" ] ; then
	693	CD_MOUNTED_OK=yes
	694	LogIt "CD-ROM drive mounted successfully." 1
	695	else
	696	LogIt "I still cannot find or mount the CD-ROM drive, by the way."
	697	fi
[1]	698	}
	699
	700
	701
	702	UseTmpfs()
	703	{
[1747]	704	local mount_cmd
	705	echo -en "Mounting /tmp/tmpfs..."
	706	mkdir -p /tmp/tmpfs
[1]	707	# For technical reasons, some sets are as large as 16MB.
	708	# I am allowing 32MB because selective restore occupies a lot of space.
[3035]	709	for size in 256m 128m 64m 48m 40m 32m ; do
[1747]	710	mount_cmd="mount /dev/shm -t tmpfs -o size=$size" ; # was 34m until 04/2003
	711	LogIt "Trying '$mount_cmd'"
	712	$mount_cmd /tmp/tmpfs 2>> $LOGFILE
	713	res=$?
	714	[ "$res" -eq "0" ] && break
	715	done
	716	if [ "$res" -ne "0" ] ; then
	717	LogIt "Failed. I could not run '$mount_cmd /tmp/tmpfs'. Your kernel is BROKEN or you do not have enough RAM." 1
	718	umount /tmp/tmpfs > /dev/null 2> /dev/null
	719	rmdir /tmp/tmpfs
[3274]	720	ln -sf /mnt/RESTORING/tmp /tmp/tmpfs; # used by mondorestore
[1747]	721	LogIt "Failed to mount /tmp/tmpfs; using ugly softlink instead"
	722	else
	723	LogIt "Great. Pivot succeeded w/ size=$size" 1
	724	echo -en "Pivoting /tmp..."
	725	umount /tmp/tmpfs
	726	mkdir -p /tmp.old
[1752]	727	mv /tmp/* /tmp.old/
	728	# Try to Deal with a busybox bug on inexistant links
[1747]	729	cp /tmp/* /tmp.old/
	730	rm -f /tmp/*
	731	$mount_cmd /tmp
[1752]	732	mv /tmp.old/* /tmp/
	733	# Try to Deal with a busybox bug on inexistant links
[1747]	734	cp /tmp.old/* /tmp/
	735	rm -rf /tmp.old
	736	mkdir -p /tmp/tmpfs
	737	mkdir -p $GROOVY
[1]	738	echo "Done."
	739	LogIt "Successfully mounted dynamic /tmp ramdisk"
	740	# mkdir -p /tmp/tmpfs/var
	741	# mv -f /var/log /tmp/tmpfs/var/log
	742	# ln -sf /tmp/tmpfs/var/log /var/log
[1747]	743	fi
[1]	744	}
	745
	746
	747	WelcomeMessage()
	748	{
[1747]	749	echo "********************************************************************"
	750	echo "MINDI-LINUX by Mondo Dev Team - web site: http://www.mondorescue.org"
	751	echo "Boot disk based on AlfaLinux & Trinux. BusyBox by Erik Andersen."
[1]	752	which petris > /dev/null 2> /dev/null && echo "Petris was written by Peter Seidler <p.seidler@mail1.stofanet.dk>."
[1747]	753	echo "Executables and source code are covered by the GNU GPL. No warranty."
	754	echo "running on $ARCH"
	755	echo "********************************************************************"
[1]	756	}
	757
	758	EnableCcissIfAppropriate() {
[2908]	759	local f
[2913]	760
	761	# In some cases, the OBDR tape remains in CD-ROM mode. This branch solves that issue (#498)
[3274]	762	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2>/dev/null`" ] && [ -x /usr/bin/hpsa_obdr_mode ]; then
[2925]	763	for lun in `/usr/bin/hpsa_obdr_mode -m query /dev/cciss/* 2>&1 \| grep "is an OBDR device" \| cut -d' ' -f4`; do
[2913]	764	/usr/bin/hpsa_obdr_mode -m query -l $lun /dev/cciss/* 2>&1 \| grep -q "is in CD-ROM mode"
	765	if [ $? -eq 0 ]; then
	766	# This tape/lun should be brought back in Sequential mode
	767	LogIt "Putting back tape $lun in Sequential mode..."
	768	/usr/bin/hpsa_obdr_mode -m tape -l $lun /dev/cciss/* 2>&1 > /dev/null
	769	fi
	770	done
	771	fi
	772
	773	# Now engage all Smart Array controllers to detect attached devices
[2955]	774	if [ -d "/proc/driver/cciss" ]; then
	775	for f in /proc/driver/cciss/cciss* ; do
	776	LogIt "Engaging $f"
	777	echo "engage scsi" > $f
	778	LogIt "...result=$?"
	779	done
	780	fi
[1]	781	}
	782
[1802]	783	ModprobeAllModules() {
[1]	784
[3278]	785	echo "Searching for modules to install..."
[2562]	786	lismod=`find /lib/modules -name '\.ko' -o -name '\.o'`
	787	# loading forced modules first
	788	for m in $lismod; do
[1927]	789	k=`basename $m \| sed 's/\.ko.*$//'`
	790	j=`basename $k \| sed 's/\.o.*$//'`
[2562]	791	echo "$FORCE_MODS" \| grep -q "$j "
	792	if [ $? -eq 0 ]; then
	793	echo "Forcing first $j..."
[2964]	794	modprobe -q $j 2> /dev/null
[2562]	795	fi
	796	done
	797	for m in $lismod; do
	798	k=`basename $m \| sed 's/\.ko.*$//'`
	799	j=`basename $k \| sed 's/\.o.*$//'`
[1830]	800	echo "$DENY_MODS" \| grep -q "$j "
[1829]	801	if [ $? -eq 0 ]; then
[1830]	802	echo "Denying $j..."
[1829]	803	continue
	804	fi
[2562]	805	echo "$FORCE_MODS" \| grep -q "$j "
	806	if [ $? -eq 0 ]; then
	807	continue
	808	fi
[1829]	809	echo "Probing $j..."
[2964]	810	modprobe -q $j 2> /dev/null
[1802]	811	done
	812	}
	813
[2755]	814	UdevadmTrigger() {
[2844]	815
[2965]	816	# This function should just echo the return value $ua
	817
[2844]	818	if [ -x /sbin/udevadm ]; then
[2965]	819	ua="/sbin/udevadm"
	820	elif [ -x /usr/bin/udevadm ]; then
	821	ua="/usr/bin/udevadm"
	822	else
	823	LogIt "WARNING: Unable to find udevadm. Not triggering udev"
	824	ua="/bin/true"
	825	fi
	826
	827	v="`$ua --version`"
	828
	829	if [ -x "$v" ]; then
	830	LogIt "Triggering udev again..."
	831	if [ "$v" -ge "146" -a "$v" -lt "174" ]; then
	832	$ua trigger --type=failed
	833	elif [ "$v" -lt "146" ]; then
	834	$ua trigger --retry-failed
[2755]	835	else
[2965]	836	LogIt "... not needed"
[2755]	837	fi
[2844]	838	fi
[2965]	839	echo $ua
[2755]	840	}
	841
[287]	842	ExtractDataDisksAndLoadModules() {
[2846]	843	LogIt "Installing additional tools ..." 1
[2888]	844	# BCO: test return value
[287]	845	install-additional-tools
[1800]	846	# Keep the kernel silent again
	847	PKLVL=`cut -f1 /proc/sys/kernel/printk`
[1802]	848	echo 0 > /proc/sys/kernel/printk
[1922]	849	ModprobeAllModules
[1800]	850	echo $PKLVL > /proc/sys/kernel/printk
[2081]	851
	852	# Retry failed udev events now that local filesystems are mounted read-write
	853	# (useful for rules creating network ifcfg files)
	854	if [ -e "/tmp/USE-UDEV" ] ; then
[2965]	855	ua=`UdevadmTrigger`
[2081]	856	fi
[287]	857	}
[1]	858
	859	# ------------------------ main -----------------------
	860
[1698]	861	MINDI_VER=PBVER
	862	MINDI_REV=PBREV
[1]	863	trap CaughtSoftReset SIGTERM
[2964]	864	trap GetShell SIGINT
[1643]	865	LOGFILE=/var/log/mondorestore.log
[1236]	866	PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/mondo:/usr/games
[1]	867	GROOVY=/tmp/groovy-stuff
	868	USER=root
[2163]	869	ARCH=`uname -m`
[1]	870
[2163]	871	export PATH GROOVY USER LOGFILE ARCH
	872
[3274]	873	mount -o remount rw /
	874	rm -f $LOGFILE
[898]	875
[3277]	876	mkdir /proc 2> /dev/null
	877	mount /proc /proc -t proc
	878
[3274]	879	# Creates log file
	880	LogIt ""
[3279]	881	# Backup fd
	882	exec 4>&2 5>&1
[3277]	883	# Redirect every message to the LOGFILE
	884	exec > >(tee -a ${LOGFILE})
	885	exec 2> >(tee -a ${LOGFILE} >&2)
	886
[3278]	887	echo "Welcome to init (from mindi ${MINDI_VER}-r${MINDI_REV})"
[3274]	888
	889	mkdir /sys 2> /dev/null
[3277]	890	mount /sys /sys -t sysfs
[3274]	891
[1]	892	[ ! "$GROOVY" ] && Die "I'm not groovy!"
[1885]	893	for i in $GROOVY /mnt/cdrom /mnt/isodir /var/local/petris /tmp/isodir; do
[1747]	894	mkdir -p $i
[1]	895	done
[1824]	896	# For ESX 3
	897	[ -d /proc/vmware ] && ! grep -q /vmfs /proc/mounts && mount -t vmfs /vmfs /vmfs
[1]	898
[1829]	899	if [ "`grep -i denymods /proc/cmdline`" ]; then
	900	export DENY_MODS="`cat /proc/cmdline \| sed 's~.denymods=\"\(.\)\".*~\1~'` mondonone"
[1830]	901	else
	902	export DENY_MODS=" "
[1829]	903	fi
[3274]	904	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2> /dev/null`" ]; then
[1958]	905	# Do not try to load usb storage when dealing with OBDR it makes the modprobe hang :-(
[1960]	906	export DENY_MODS="usb-storage $DENY_MODS"
[1958]	907	fi
[1829]	908	if [ "`grep -i forcemods /proc/cmdline`" ]; then
	909	export FORCE_MODS="`cat /proc/cmdline \| sed 's~.forcemods=\"\(.\)\".*~\1~'` mondonone"
[1830]	910	else
	911	export FORCE_MODS=" "
[1829]	912	fi
[2533]	913	if [ "`grep -i excludedevs /proc/cmdline`" ]; then
[2564]	914	export MINDI_EXCLUDE_DEVS="`cat /proc/cmdline \| sed 's~.excludedevs=\"\(.\)\".*~\1~'` mondonone"
[2580]	915	for d in $MINDI_EXCLUDE_DEVS ; do
	916	echo "Mountlist exclusion == $d"
[3203]	917	if [ -e "/tmp/mountlist.txt" ]; then
	918	perl -i -ne 'print $_ unless m~$d~' /tmp/mountlist.txt
	919	fi
[2580]	920	done
[2533]	921	else
[2564]	922	export MINDI_EXCLUDE_DEVS=" "
[2533]	923	fi
[1829]	924
[1826]	925	echo "Activating a potential USB keyboard/mouse"
[1787]	926	StartUSBKbd
	927
[1720]	928	if [ -f /proc/sys/kernel/exec-shield ]; then
	929	echo 0 > /proc/sys/kernel/exec-shield 2>> /dev/null
	930	fi
[1]	931
[1729]	932	if [ -f /proc/modules ]; then
	933	echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
	934	fi
	935
[1716]	936	if [ -e "/tmp/USE-UDEV" ] ; then
[1747]	937	RunUdevd
[1716]	938	fi
[1798]	939	ExtractDevTarballs
[1]	940	LaunchTerminals
[1718]	941
[3274]	942	# Keeping kernel silent for module insertion
[1789]	943	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	944	echo 0 > /proc/sys/kernel/printk
[1922]	945	ModprobeAllModules
[1789]	946	echo $PKLVL > /proc/sys/kernel/printk
[1718]	947
[1]	948	EnableCcissIfAppropriate
	949	#-------------------------------
	950	#WHOLIVESINAPINEAPPLEUNDERTHESEA#;# --- don't touch this :)
	951	#-------------------------------
	952	UseTmpfs
[3274]	953	if [ ! -e "/tmp/mondorestore.cfg" ] ; then
	954	LogIt "Warning - /tmp/mondorestore.cfg not found"
[1]	955	fi
[2182]	956	if [ "`grep -i pxe /proc/cmdline`" ] \|\| [ "`grep -i net /proc/cmdline`" ]; then
[2380]	957	# We need to get here exported variables from start-netfs
	958	. /sbin/start-netfs
[2182]	959	fi
[1]	960
[3274]	961	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2>/dev/null`" ] \|\| [ "`grep -i ' udev' /tmp/mondorestore.cfg 2>/dev/null`" ]; then
[1747]	962	HandleTape
[287]	963	ExtractDataDisksAndLoadModules
[737]	964	elif [ "`grep -i pxe /proc/cmdline`" ]; then
[287]	965	# Simulate a local CD
	966	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	967	CD_MOUNTED_OK=yes
[287]	968	ExtractDataDisksAndLoadModules
[2182]	969	# Fake the conf file to force it to NFS mode, even if we made originally a CD (mandatory for mondorestore to work correctly)
[3274]	970	sed -i "s/backup-media-type.*/backup-media-type netfs/" /tmp/mondorestore.cfg
	971	elif [ "`grep -i usb= /proc/cmdline`" ] \|\| [ "`grep -i usb /tmp/mondorestore.cfg 2>/dev/null \| grep media-type`" ]; then
[1747]	972	. /sbin/start-usb
[1698]	973
	974	# Simulate a local CD
	975	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	976	CD_MOUNTED_OK=yes
[1698]	977	ExtractDataDisksAndLoadModules
[1]	978	else
[1885]	979	HandleCDROM
[287]	980	ExtractDataDisksAndLoadModules
[2380]	981	# We need to get here exported variables from start-netfs
	982	. /sbin/start-netfs
[1]	983	fi
	984	res=$?
	985	ConfigureLoggingDaemons
	986	if [ -e "/tmp/USE-DEVFS" ] ; then
[2878]	987	umount -d /mnt/cdrom 2> /dev/null
[1747]	988	mv /dev/cdrom /cdrom.lnk 2> /dev/null
	989	CD_MOUNTED_OK=""
	990	RunDevfsd
[1]	991	fi
[1813]	992	LoadKeymap
	993	WelcomeMessage
	994	RstHW
[2559]	995	echo "Starting potential Raid/Multipath ..."
[2580]	996	[ -e "/tmp/mountlist.txt" ] && cp -f /tmp/mountlist.txt /tmp/mountlist.original
[1]	997	PauseForRaids
	998	StartRaids
[2072]	999	StartMpath
[1]	1000	StartLvms
	1001	CopyBootDevEntry
	1002	mkdir -p /tmp/tmpfs
	1003	sleep 2
	1004	#clear
[3203]	1005	if [ -e "/dev/md0" ] && [ ! -e "/dev/md/0" ] && [ -e "/tmp/mountlist.txt" ] && [ "`grep /dev/md/ /tmp/mountlist.txt`" != "" ] ; then
[1747]	1006	LogIt "Creating /dev/md/* softlinks just in case." 1
	1007	mkdir -p /dev/md
	1008	cp -af /dev/md0 /dev/md/0 2> /dev/null
	1009	cp -af /dev/md1 /dev/md/1 2> /dev/null
	1010	cp -af /dev/md2 /dev/md/2 2> /dev/null
[1]	1011	fi
	1012
[241]	1013	if ! [ "`grep -i "pxe" /proc/cmdline`" ] ; then
[1]	1014	res="`cat /mnt/cdrom/archives/THIS-CD-NUMBER 2> /dev/null`"
	1015	[ "$res" != "1" ] && [ "$res" != "" ] && Die "This is CD #$res in the series. Please insert CD #1."
	1016	[ -e "/cdrom.lnk" ] && mv -f /cdrom.lnk /dev/cdrom && mount /dev/cdrom /mnt/cdrom && CD_MOUNTED_OK=yes
	1017	[ "$CD_MOUNTED_OK" != "yes" ] && TryAgainToFindCD
	1018	#mount \| grep cdrom > /dev/null 2> /dev/null \|\| mount /dev/cdrom /mnt/cdrom >> $LOGFILE 2>> $LOGFILE
	1019	fi
	1020	hack-cfg-if-necessary \|\| LogIt "Cannot find hack-cfg-if-necessary"
	1021
[1403]	1022	# Log some useful info
[1837]	1023	LogIt "init (from mindi v$MINDI_VER-r${MINDI_REV})"
[1413]	1024	LogIt "/proc/cmdline is:"
[2346]	1025	LogIt "----------"
[1403]	1026	cat /proc/cmdline >> $LOGFILE
[2346]	1027	LogIt "----------"
[1413]	1028	LogIt "df result:"
	1029	LogIt "----------"
[1403]	1030	df >> $LOGFILE
[1413]	1031	LogIt "-------------"
	1032	LogIt "mount result:"
	1033	LogIt "-------------"
[1403]	1034	mount >> $LOGFILE
[1413]	1035	LogIt "-------------"
	1036	LogIt "lsmod result:"
	1037	LogIt "-------------"
[1403]	1038	lsmod >> $LOGFILE
[1413]	1039	LogIt "-------------"
[1476]	1040	LogIt "dmesg result:"
	1041	LogIt "-------------"
	1042	dmesg >> $LOGFILE
[2015]	1043	LogIt "-------------"
[2979]	1044	LogIt "/proc/mdstat:" >> $LOGFILE
	1045	LogIt "-------------"
	1046	cat /proc/mdstat >> $LOGFILE
	1047	LogIt "-------------"
[2015]	1048	LogIt "/proc/swaps:" >> $LOGFILE
	1049	LogIt "-------------"
	1050	cat /proc/swaps >> $LOGFILE
	1051	LogIt "-------------"
	1052	LogIt "/proc/filesystems:" >> $LOGFILE
	1053	LogIt "-------------"
	1054	cat /proc/filesystems >> $LOGFILE
	1055	LogIt "-------------"
	1056	LogIt "/proc/partitions:" >> $LOGFILE
	1057	LogIt "-------------"
	1058	cat /proc/partitions >> $LOGFILE
[2346]	1059	LogIt "-------------"
	1060	LogIt "fdisk result:" >> $LOGFILE
	1061	LogIt "-------------"
	1062	fdisk -l >> $LOGFILE
[2768]	1063	LogIt "-------------"
[3274]	1064	if [ -f /tmp/mondorestore.cfg ]; then
	1065	LogIt "/tmp/mondorestore.cfg result:" >> $LOGFILE
[2832]	1066	LogIt "-------------"
[3274]	1067	cat /tmp/mondorestore.cfg >> $LOGFILE
[2832]	1068	fi
[1403]	1069
[1983]	1070	ide-opt
[1]	1071
	1072	#ctrlaltdel soft
	1073	for i in null stdout stdin stderr ; do
[1747]	1074	cp -af /dev/$i /tmp
[1]	1075	done
[2081]	1076	# Not sure it's still needed, but shouldn't hurt
	1077	if [ -e "/tmp/USE-UDEV" ] ; then
[2965]	1078	ua=`UdevadmTrigger`
[2081]	1079	fi
[3274]	1080	if grep "backup-media-type" /tmp/mondorestore.cfg > /dev/null 2> /dev/null ; then
[1747]	1081	LogIt "backup-media-type is specified in config file - great."
[2197]	1082	LogIt "Calling post-init"
[2380]	1083	# start-netfs moved it under /tmp as the NFS share is already unmounted
[3210]	1084	if [ _"$pre" != _"" ] && [ "`echo $pre \| grep -E '^/tmp/isodir'`" ]; then
[2533]	1085	pre=`echo $pre \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2255]	1086	fi
[3210]	1087	if [ _"$pre" != _"" ] && [ -x $pre ]; then
[2255]	1088	echo "Executing preliminary script $pre"
	1089	LogIt "Executing preliminary script $pre"
	1090	$pre
	1091	fi
[1747]	1092	post-init
[1]	1093	else
[1747]	1094	LogIt "backup-media-type is not specified in config file."
[1885]	1095	LogIt "I think this media has no archives on it."
[1]	1096	fi
[2255]	1097	if [ "`grep -i "post=" /proc/cmdline`" ] ; then
[2249]	1098	for i in `cat /proc/cmdline` ; do
[3210]	1099	echo $i \| grep -qi post= && post=`echo $i \| cut -d= -f2`
[2249]	1100	done
[2380]	1101	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	1102	if [ "`echo $post \| grep -E '^/tmp/isodir'`" ]; then
	1103	post=`echo $post \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2253]	1104	fi
[2581]	1105	if [ -r $post ]; then
[2255]	1106	echo "Executing final script $post"
	1107	LogIt "Executing final script $post"
	1108	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	1109	mount-me
	1110	fi
[2581]	1111	chmod 755 $post
[2255]	1112	$post
	1113	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	1114	unmount-me
	1115	fi
[2249]	1116	fi
	1117	fi
[1612]	1118	if grep "RESTORE" /proc/cmdline > /dev/null 2> /dev/null ; then
	1119	echo "Rebooting in 10 seconds automatically as per reboot order"
	1120	echo -en "Press ^C to interrupt if you have to ..."
	1121	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	1122	sleep 1
	1123	echo -en "."
	1124	done
	1125	echo "Boom."
	1126	sleep 1
	1127	else
[2888]	1128	GetShell
[1612]	1129	fi
[1]	1130	CaughtSoftReset

Note: See TracBrowser for help on using the repository browser.

Download in other formats: