source: MondoRescue/branches/3.2/mindi/mindi@ 3396

Last change on this file since 3396 was 3396, checked in by Bruno Cornec, 9 years ago

Fix logging of mondorescue.cfg if it exists

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 121.7 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3396 2015-08-01 03:55:45Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000 # increase if you run out of ramdisk space
44BOOT_SIZE=86000 # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47 # Ask if you want to make a CD Image to be written?
48 # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51 # Ask if you want to make a USB Image to be written?
52 # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55 # If set to "no", you will be prompted for whether or not
56 # you want to use your own kernel, or the supplied default.
57 # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60 # If set to "no", the kernel is not a Xen kernel
61 # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio hv_storvsc"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/mr-parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107 . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119 ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125 if [ -e /dev/stderr ] ; then
126 echo -e "$1" >> /dev/stderr
127 elif [ -e /usr/bin/logger ] ; then
128 /usr/bin/logger -s $1
129 fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135 echo -e "$1" >> $LOGFILE
136 if [ _"$2" != _"" ]; then
137 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138 fi
139 rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144 LogScreen "$1"
145 LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150 LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157 LogFile "Mindi $MINDI_VERSION is exiting"
158 LogFile "End date : `date`"
159 if [ _"$MONDO_SHARE" != _"" ] ; then
160 echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161 if [ -f $LOGFILE ]; then
162 cat $LOGFILE >> /var/log/mondoarchive.log
163 else
164 echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
165 fi
166 echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167 fi
168
169 cd /
170 sync&
171
172 # Clean temporary files only when standalone mindi
173 if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174 rm -Rf $MINDI_TMP
175 fi
176 exit $1
177}
178
179Die() {
180 local i
181 if [ "$1" = "" ] ; then
182 LogAll "FATAL ERROR"
183 else
184 LogAll "FATAL ERROR. $1"
185 fi
186 if [ _"$2" != _"" ]; then
187 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188 fi
189 rm -f "$2"
190
191 LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192 LogAll "See http://www.mondorescue.org for more information."
193 LogAll "WE CANNOT HELP unless you enclose that file.\n"
194 MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200 df $TMPDIR
201 Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204 Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207 Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215 [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216 Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221 trap SIGHUP SIGTERM SIGTRAP SIGINT
222 [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223 Die "User abort."
224}
225
226
227AddFileToCfgIfExists() {
228 [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
229}
230
231
232AddKeyboardMappingFile() {
233 local mappath r included_list included_item i res ii sss
234 mappath=$1
235 KBDEPTH=$(($KBDEPTH+1))
236 [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
237 if [ -e "$bigdir/$mappath" ] ; then
238 LogFile "INFO: $mappath already added"
239 return
240 elif [ -d "$bigdir/$mappath" ] ; then
241 echo "Cannot add $mappath: it's a directory. Sorry."
242 return
243 fi
244 LogFile "INFO: Added kbd map $mappath"
245 if [ ! -e "$mappath" ] ; then
246 mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
247 if [ ! -e "$mappath" ] ; then
248 LogAll "WARNING: Cannot add $mappath: kbd map file not found"
249 return
250 fi
251 else
252 echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
253 fi
254
255 tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
256 if [ "`echo $mappath | grep -F ".gz"`" ] ; then
257 included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
258 else
259 included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
260 fi
261 for included_item in $included_list ; do
262 if [ ! -e "$included_item" ] ; then
263 sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
264 [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
265 for ii in $sss ; do
266 [ -e "$ii" ] && AddKeyboardMappingFile $ii
267 done
268 else
269 AddKeyboardMappingFile $included_item
270 fi
271 done
272}
273
274
275CopyDependenciesToDirectory() {
276 local outdir incoming counter d found tdir
277 outdir=$1
278 mkdir -p $outdir
279 incoming=`ReadLine`
280 counter=0
281 while [ "$incoming" != "" ] ; do
282 # Non absolute file names should not arrive till here => skipped
283 if [ `echo "$incoming" | cut -c1` != '/' ]; then
284 LogAll "WARNING: Unable to handle $incoming"
285 incoming=`ReadLine`
286 continue
287 fi
288 # no parent directory of incoming should be a link, copy is not possible in that case
289 d=`dirname "$incoming"`
290 found="false"
291 while [ $d != "/" -a $found = "false" ]; do
292 [ -h "$d" ] && found="true"
293 d=`dirname "$d"`
294 done
295 if [ -d "$incoming" -a ! -h "$incoming" ]; then
296 find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
297 elif [ -e "$incoming" ] && [ $found = "false" ]; then
298 if [ ! -h "$incoming" ]; then
299 tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
300 else
301 tdir=`dirname "$incoming"`
302 if [ ! -e "$outdir/$tdir" ]; then
303 mkdir -p "$outdir/$tdir"
304 fi
305 cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
306 fi
307 # Only uncompress modules if not using udevd
308 if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
309 gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
310 fi
311 [ -x "$outdir" ] && StripExecutable $outdir
312 counter=$(($counter+1))
313 LogProgress $counter $2
314 fi
315 incoming=`ReadLine`
316 done
317}
318
319
320CountItemsIn() {
321 local r
322 r=0
323 for q in $1 ; do
324 r=$(($r+1))
325 done
326 echo $r
327}
328
329
330DropOptimizedLibraries() {
331 local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
332 filelist=$1
333 outdir=$2
334
335 list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
336 if [ "$list_of_optimized_libraries" = "" ] ; then
337 return 0
338 fi
339 echo -en "Dropping i686-optimized libraries if appropriate"
340 for optimized_lib_name in $list_of_optimized_libraries ; do
341 echo -en "."
342 reason=""
343 vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
344 echo "$vanilla_lib_name" >> $filelist
345 LogFile "INFO: Adding $vanilla_lib_name to filelist"
346 mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
347 rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
348
349 # This may return multiple files
350 for resolved in `mr-read-all-link $vanilla_lib_name`; do
351 LogFile "INFO: Adding as deps $resolved to filelist"
352 vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
353 if [ "$vanilla_resolved_name" != "$resolved" ]; then
354 mkdir -p $outdir$resolved> /dev/null 2> /dev/null
355 rmdir $outdir$resolved > /dev/null 2> /dev/null
356 ln -sf $vanilla_resolved_name $outdir$resolved
357 LogFile "INFO: Excluding deps $resolved"
358 grep -Fvx "$resolved" "$filelist" > $filelist.tmp
359 LogFile "INFO: Replacing it with $vanilla_resolved_name"
360 echo "$vanilla_resolved_name" >> $filelist.tmp
361 mv -f $filelist.tmp $filelist
362 fi
363 done
364 done
365 $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
366 mv -f $filelist.tmp $filelist
367 echo -e "$DONE"
368}
369
370
371FindAndAddUserKeyboardMappingFile() {
372 local r res mapfile mappath included_item included_list keyfile mp locale
373 LogAll "INFO: Analyzing your keyboard's configuration."
374 KEYDIR=/usr/lib/kbd
375 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
376 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
377 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
378 [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379 if [ ! -e "$KEYDIR" ] ; then
380 LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
381 return 0
382 fi
383 if [ -e "/etc/sysconfig/keyboard" ] ; then
384 LogFile "INFO: Red Hat-style config detected."
385 keyfile=/etc/sysconfig/keyboard
386 elif [ -e "/etc/vconsole.conf" ] ; then
387 LogFile "INFO: New Fedora style config detected."
388 keyfile=/etc/vconsole.conf
389 elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390 LogFile "INFO: Slackware-style config detected."
391 keyfile=/etc/rc.d/rc.keymap
392 elif [ -e "/etc/rc.config" ] ; then
393 LogFile "INFO: Debian-style config detected."
394 keyfile=/etc/rc.config
395 elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396 LogFile "INFO: Debian-style config detected."
397 mkdir -p $bigdir/tmp
398 echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
399 KBDEPTH=0
400 mkdir -p $bigdir/etc/console
401 cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402 echo ""
403 echo -e "$DONE"
404 return 0
405 elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406 LogFile "INFO: Ubuntu-style config detected."
407 mkdir -p $bigdir/tmp
408 if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409 kbdfile="/etc/console-setup/boottime.kmap.gz"
410 else
411 kbdfile="/etc/console-setup/cached.kmap.gz"
412 fi
413 echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
414 KBDEPTH=0
415 mkdir -p $bigdir/etc/console-setup
416 cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417 echo ""
418 echo -e "$DONE"
419 return 0
420 elif [ -e "/etc/rc.conf" ] ; then
421 LogFile "INFO: ArchLinux config detected."
422 keyfile=/etc/rc.conf
423 elif [ -e "/etc/conf.d/keymaps" ] ; then
424 LogFile "INFO: Gentoo-style config detected."
425 keyfile=/etc/conf.d/keymaps
426 elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427 LogFile "INFO: X11-style config detected."
428 keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429 else
430 LogFile "Searching for rc.config ..."
431 keyfile=`find /etc -name rc.config | head -n1`
432 if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433 LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434 return
435 else
436 LogFile "INFO: Found $keyfile"
437 fi
438 fi
439 if [ ! -e "$KEYDIR/keymaps" ] ; then
440 LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441 return
442 fi
443 LogFile "INFO: keyfile=$keyfile"
444 # For SLES we need to remove the .map.gz extension Cf #614
445 locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446 [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
447 [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
448 [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
449 LogFile "INFO: locale=$locale"
450 #
451 # Process the keymaps dir once for all
452 # AddKeyboardMappingFile will use it recursively
453 #
454 find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455 mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456 [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457 # If we have multiple keymaps then log it !!
458 echo "$mp" | grep -q " " >> $LOGFILE
459 if [ $? -eq 0 ]; then
460 LogAll "WARNING: Multiple keymaps found: $mp"
461 LogFile "INFO: The following one will be used"
462 fi
463 for i in $mp ; do
464 mappath=$i
465 [ -e "$i" ] && [ ! -d "$i" ] && break
466 done
467 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468 mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469 fi
470 LogFile "INFO: mappath = $mappath"
471 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472 LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473 return
474 fi
475 LogAll "INFO: Adding the following keyboard mapping tables: "
476 mkdir -p $bigdir/tmp
477 echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
478 KBDEPTH=0
479 AddKeyboardMappingFile $mappath
480 echo ""
481 echo -e "$DONE"
482 rm -f $MINDI_TMP/keymaps.find
483 return 0
484}
485
486
487FindLdlinux32Binary() {
488 LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
489 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
490 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
491 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
492 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
493 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
494 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
495 #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
496 if [ ! -e "$LDLINUXC32" ]; then
497 LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
498 LDLINUXC32=/tmp/idoesnthopefullyexist
499 else
500 LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
501 fi
502}
503
504
505FindMboot32Binary() {
506 MBOOTC32=/usr/lib/syslinux/mboot.c32
507 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
508 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
509 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
510 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
511 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
512 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
513 [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
514 [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
515 LogFile "INFO: Found mboot.c32 at $MBOOTC32"
516}
517
518FindIsolinuxBinary() {
519 ISOLINUX=/usr/lib/isolinux.bin
520 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
521 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
522 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
523 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
524 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
525 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
526 [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
527 [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
528 LogFile "INFO: Found isolinux.bin at $ISOLINUX"
529}
530
531
532GenerateGiantDependencyList() {
533 local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
534
535 echo -en "Analyzing dependency requirements"
536 outfile=$1
537 tempfile=$MINDI_TMP/$$.txt
538 incoming=`ReadLine`
539
540 > $tempfile
541 progress=0
542 res=0
543 noof_lines=$2
544 while [ "$incoming" != "" ] ; do
545 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
546 incoming=`ReadLine`
547 continue
548 fi
549 if [ "$incoming" = "LVMFILES:" ] ; then
550 break
551 fi
552 filelist=`GenerateListForFile "$incoming"`
553 r=$?
554 [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
555 res=$(($res+$r))
556# LogFile "INFO: '$incoming' generates filelist '$filelist'"
557 for fname in $filelist ; do
558 [ "$fname" != "" ] && echo "$fname" >> $tempfile
559 done
560 progress=$(($progress+1))
561 LogProgress $progress $noof_lines
562 incoming=`ReadLine`
563 done
564 if [ "$incoming" = "LVMFILES:" ] ; then
565 incoming=`ReadLine`
566 lvmversion=""
567 while [ "$incoming" != "" ] ; do
568 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
569 incoming=`ReadLine`
570 continue
571 fi
572 filelist=`GenerateListForFile "$incoming"`
573 for tool in $filelist ; do
574 lvmresolved=`readlink -f $tool`
575 if [ "$tool" = "$lvmresolved" ]; then
576 echo "$tool" >> $tempfile
577 elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
578 if [ "$lvmversion" = "" ] ; then
579 lvmversion=`$lvmresolved`
580 echo "$lvmresolved" >> $tempfile
581 fi
582 toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
583 if [ "$lvmversion" = "200" ]; then
584 # pvdata and lvmcreate_initrd don't exist in LVM2
585 case "$toolstripped" in
586 "pvdata")
587 continue
588 ;;
589 "lvmcreate_initrd")
590 continue
591 ;;
592 esac
593 fi
594 toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
595 if [ -e "$toolpath" ] ; then
596 echo "$toolpath" >> $tempfile
597 echo "$tool" >> $tempfile
598 else
599 toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
600 fi
601 if [ -e "$toolpath" ] ; then
602 echo "$toolpath" >> $tempfile
603 echo "$tool" >> $tempfile
604 else
605 echo "Where are your LVM-Tools? Couldn't find $tool"
606 fi
607 else
608 echo "$tool" >> $tempfile
609 fi
610 done
611 progress=$(($progress+1))
612 LogProgress $progress $noof_lines
613 incoming=`ReadLine`
614 done
615 fi
616 echo -en "$DONE\nMaking complete dependency list"
617
618 tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
619 mv -f $tempfile.new $tempfile
620 > $outfile.pre
621 progress=0
622 noof_lines=`cat $tempfile | wc -l`
623 LogFile "---------------------------------"
624 LogFile "List of dependencies: "
625 LogFile "---------------------------------"
626 for fname in `cat $tempfile` ; do
627 echo "$fname" | tee -a $LOGFILE >> $outfile.pre
628 LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
629 progress=$(($progress+1))
630 LogProgress $progress $noof_lines
631 done
632 if [ _"$MONDO_SHARE" != _"" ]; then
633 mkdir -p $bigdir/tmp
634 mkdir -p $bigdir/usr/bin
635 if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
636 LogAll "\nINFO: Incorporating post-nuke tarball"
637 old_pwd=`pwd`
638 cd "$bigdir"
639 tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
640 cd "$old_pwd"
641 fi
642 if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
643 LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
644 else
645 LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
646 LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
647 LogIt " If Mindi was called by Mondo then send me a bug report."
648 LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
649 LogIt " Finally, run Mindi again."
650 Die "Odd."
651 fi
652 cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
653 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
654 LogAll "\nINFO: Incorporating Network-related settings"
655 for r in NETFS-* ; do
656 cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
657 LogFile "INFO: Copying $r to ramdisk"
658 done
659 fi
660 fi
661 tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
662 rm -f $tempfile $outfile.pre
663 [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
664 return $res
665}
666
667
668GenerateListForFile() {
669 local files_found loc fname incoming i res
670 incoming="$1"
671 files_found=""
672 res=0
673
674 for fname in $incoming ; do
675 files_found="$files_found `LocateFile $fname`"
676 done
677
678 echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
679}
680
681
682# Returns all disk devices which are part of a raid array
683GetAllRaidMembers() {
684 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
685}
686
687
688GetFileSizeList() {
689 local i
690 for i in `find $1 -type d -o -print` ; do
691 du -sk $i
692 done
693}
694
695
696# Check kernel filesystem capabilites for accessing initrd image
697# Could be ext2 FS (old mode) or initramfs (new mode)
698#
699# Interface definition:
700# param #1: absolute path to kernel image
701GetInitrdFilesystemToUse() {
702
703 # interface test: make sure we have one parameter
704 if [ $# -ne 1 ]; then
705 Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
706 fi
707
708 # interface parameters
709 local lvKernelImage=$1
710
711 # local constants (filesystem magic strings)
712 local lcMagicCramfs="<3>cramfs: wrong magic"
713 local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
714 local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
715 local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
716
717 # local variables
718 local lvOffset
719 local lvScanRes
720 local lvUseFilesystem
721
722 # say where we are.
723 LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
724
725 # verify that file exists
726 [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
727
728 # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
729 file $lvKernelImage 2>&1 | grep -q gzip
730 if [ $? -eq 0 ]; then
731 LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
732 lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
733 else
734 LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
735 # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
736 # get offet of gzip magic "1f8b0800" in file (for these older kernels)
737 lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
738 if [ $lvOffset -eq 0 ]; then
739 LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
740 lvScanRes=$lcMagicInitfs
741 else
742 lvOffset=`expr $lvOffset / 2`
743 LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
744 # scan again kernel image
745 lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
746 fi
747 fi
748
749 # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
750 if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
751 lvUseFilesystem="ext2fs"
752 elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
753 lvUseFilesystem="ext3fs"
754 elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
755 lvUseFilesystem="initramfs"
756 elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
757 lvUseFilesystem="cramfs"
758 else
759 # In that case, we are most probably after 2.6.30 and use the supported initramfs
760 LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
761 LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
762 LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
763 lvUseFilesystem="initramfs"
764 fi
765
766 # say what we are using
767 LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
768
769 # return file system to use
770 echo "$lvUseFilesystem"
771
772}
773
774# Searches members of raid device
775# $1: raid device (/dev/md...)
776GetRaidDevMembers() {
777 if [ ! -f /etc/raidtab ]; then
778 return
779 fi
780 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
781}
782
783
784ListAllPartitions() {
785 local res currline partition all_partitions ap_orig remaining i j
786
787 grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
788 [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
789 if [ -e "/vmfs/volumes" ]; then
790 # For VMWare ESX 3 get the device names of these volumes
791 vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
792 fi
793 return
794}
795
796
797ListImagesForUser() {
798 local path fname
799 path=$MINDI_CACHE
800 echo -en "In the directory '$path' you will find the images:-\n"
801 for fname in `ls $path | grep -F mindi-` ; do
802 printf "%19s " $fname
803 done
804 echo " "
805}
806
807
808ListKernelModulePaths() {
809 local module_list module fname r kern
810 module_list="$MODULES"
811 # Remove unwanted modules from list
812 for i in $DENY_MODS; do
813 module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
814 done
815###
816### Sq-Modification ... Use kernelname for module search path if specified
817###
818 if [ "${kernelname}" != "" ]
819 then
820 kern=${kernelname}
821 else
822 kern="$KERVERRUN"
823 fi
824 export KERVER=$kern
825###
826### Sq-Mod End
827###
828 # Get rid of duplicates
829 for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
830 r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
831 if [ -z "$r" ]; then
832 if [ "`echo "$MODULES" | grep -w $module`" ]; then
833 r="[live module file not found]"
834 else
835 r="[extra module file not found]"
836 fi
837 else
838 [ -f "$r" ] && echo "$r"
839 fi
840 LogFile "INFO: module $module --> $r"
841 done
842 find /lib/modules/$kern/modules.* -type f 2> /dev/null
843}
844
845#
846# Critical function which computes all dependencies (dyn. lib.)
847# for a list of binaries
848#
849LocateDeps() {
850 local incoming fname deps
851 incoming="$*"
852 deps=""
853
854 for fname in $incoming ; do
855 if [ ! -e "$fname" ] ; then
856 LogFile "WARNING: $fname does not exist; cannot be LDD'd."
857 if echo $fname | grep lvm &> /dev/null ; then
858 LogFile " This warning only affects you if you are using LVM."
859 if echo "$MODULES" | grep lvm &> /dev/null ; then
860 LogFile " I think you are, so please take heed!"
861 else
862 LogFile " I don't think you are, so don't worry about it."
863 fi
864 fi
865 else
866 deps="$deps $fname"
867 fi
868 done
869 mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
870}
871
872
873LocateFile() {
874 local i j path fname_to_find location output resolved tmp stub cache_id loclist
875 fname_to_find="$1"
876 # It's an absolute path
877 j=`echo "$fname_to_find" | cut -c1`
878 if [ _"$j" = _"/" ]; then
879 dn=`dirname $fname_to_find`
880 # We suppose that the link is already included, just add the new file
881 if [ -h "$dn" ]; then
882 newdn=`readlink -f $dn`
883 bn=`basename $fname_to_find`
884 output="$newdn/$bn"
885 else
886 output="$fname_to_find"
887 fi
888 if [ -h "$output" ] ; then
889 output="`mr-read-all-link $output` $output"
890 fi
891 echo "$output"
892 return 0
893 fi
894 # It's not an absolute path
895 output=""
896 for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
897 #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
898 [ -h "$path" ] && continue
899 [ ! -e "$path/$fname_to_find" ] && continue
900 output="$path/$fname_to_find $output"
901 if [ -h "$path/$fname_to_find" ] ; then
902 output="`mr-read-all-link $path/$fname_to_find` $output"
903 fi
904 done
905 if [ "$output" = "" ] ; then
906 return 1
907 fi
908 echo "$output"
909 return 0
910}
911
912LogProgress() {
913 local i progress modres noof_lines title
914
915 progress=$1
916 noof_lines=$2
917 title=$3
918
919 i=$(($progress*100))
920 if [ $noof_lines -ne 0 ]; then
921 i=$(($i/$noof_lines))
922 else
923 i=0
924 fi
925
926 if [ _"$MONDO_SHARE" != _"" ]; then
927 echo "$title $i%"
928 else
929 echo -en "\r\t\t\t\t\t\t\t\t"
930 echo -en "$i"
931 echo -en "%"
932 modres=$(($progress%4))
933 [ "$modres" -eq "0" ] && echo -en "\t/"
934 [ "$modres" -eq "1" ] && echo -en "\t-"
935 [ "$modres" -eq "2" ] && echo -en "\t\\"
936 [ "$modres" -eq "3" ] && echo -en "\t|"
937 fi
938}
939
940# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
941MakeMondoConfigFile() {
942 local outfile use_lzo use_comp use_star
943 outfile=$1
944 > $outfile
945 [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
946 [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
947 [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
948 [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
949 [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
950 [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
951 use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
952 use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
953 use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
954 use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
955 use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
956 echo "use-lzo $use_lzo" >> $outfile
957 echo "use-gzip $use_gzip" >> $outfile
958 echo "use-star $use_star" >> $outfile
959 echo "use-lzma $use_lzma" >> $outfile
960 echo "use-comp $use_comp" >> $outfile
961 echo "datestamp `date`" >> $outfile
962 [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
963 AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
964 AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
965 AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
966 AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
967 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
968 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
969 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
970 AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
971 AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
972 AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
973 AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
974 AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
975 AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
976
977 # Deal with network configuration in a portable way
978 if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
979 mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
980 fi
981}
982
983# Get PV's for an LV
984GetPVsForLV() {
985 if [ -n "$1" ]; then
986 vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
987 if [ -z "$vg" ]; then
988 return
989 fi
990 $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
991 fi
992}
993
994
995MakeMountlist() {
996 local mountlist all_partitions current_partition \
997partition_size partition_format outstring partition_number \
998partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
999absolute_partition old_partition_fmt current_lvolume uname skip
1000
1001 LogFile "------------------------------------"
1002 LogFile "Your raw fstab file looks like this:"
1003 LogFile "------------------------------------"
1004 cat $MY_FSTAB >> $LOGFILE
1005 LogAll "-----------------------------------"
1006 LogAll "Your mountlist will look like this:"
1007 LogAll "-----------------------------------"
1008
1009# mountlist(OUT)
1010 mountlist=$1
1011
1012# NB: partition = device
1013# NB: mountpt = where the device is mounted
1014
1015 [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1016
1017 [ "$mountlist" != "" ] && rm -Rf $mountlist
1018 > $mountlist
1019 all_partitions=""
1020
1021 if [ $LVM != "false" ]; then
1022 LogAll "INFO: Analyzing LVM..."
1023 $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1024 if [ $? -ne 0 ]; then
1025 LVM="false"
1026 fi
1027 # Excluded LVs and GVs are not reported here
1028 all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1029 fi
1030 all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1031 for i in $IMAGE_DEVS ; do
1032 mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1033 done
1034 [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1035 printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1036 printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
1037 useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1038 for c_p in $all_partitions ; do
1039 # Skip fd/cd devices, network FS, cifs
1040 [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1041 [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1042 if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1043 current_partition=`readlink -f $c_p`
1044 if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1045 current_partition="$c_p"
1046 elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1047 # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1048 current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1049 fi
1050 [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1051 else
1052 current_partition="$c_p"
1053 fi
1054 [ "$c_p" = "none" ] && continue
1055 redhat_label=""
1056 label=""
1057 uuid=""
1058 absolute_partition=`readlink -f $c_p`
1059 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1060
1061 # set default in case we dont't find it
1062 str_to_find_fmt_with=$current_partition
1063
1064 # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1065 # current_partition contains only first column of /etc/fstab
1066 if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1067 redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1068 actual_dev=""
1069
1070 # 1st try, findfs - the RHEL way of finding labels and their partitions
1071 if [ -x "/sbin/findfs" ]; then
1072 actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1073 fi
1074
1075 # 2nd try : blkid, the good way for all LABEL except swap
1076 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1077 actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1078 # For LVM FS it will give a /dev/dm-# which should then be converted
1079 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1080 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1081 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1082 for dev in `ls /dev/mapper/*`; do
1083 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1084 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1085 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1086 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1087 break
1088 fi
1089 done
1090 fi
1091 fi
1092
1093 # 3rd try, which works on a standard partition (ext2/3), but not on swap
1094 # For LVM gives a /dev/mapper entry
1095 if [ "x$actual_dev" = "x" ]; then
1096 actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1097 fi
1098
1099 # 4th try, with vol_id
1100 # SWAP only
1101 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1102 list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1103 for dev_swap in $list_swaps ; do
1104 dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1105 if [ "x$dev_exists" != "x" ]; then
1106 actual_dev=$dev_swap
1107 break;
1108 fi
1109 done
1110 fi
1111
1112 # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1113 # LABEL=SW-cciss/c0d0p3 (RDP)
1114 # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1115 # SWAP only
1116 if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1117 skip=""
1118 uname=$KERVERRUN
1119 [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1120 # 2.6.12 needs 16 (FC3)
1121 [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1122 # 2.6.19 and upper needs 1052
1123 [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1124 [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1125 [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1126 if [ $skip = "" ]; then
1127 Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1128 fi
1129 for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1130 do
1131 # Location of the swap label for kernel 2.6
1132 try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1133 if [ "x$try_dev_label" = "x$redhat_label" ]; then
1134 actual_dev=$try_dev
1135 fi
1136 done
1137 fi
1138
1139 # Check if one of all those tries has known success
1140 if [ "x$actual_dev" != "x" ]; then
1141 current_partition=$actual_dev
1142 else
1143 Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1144 fi
1145 # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1146 # current_partition contains only first column of /etc/fstab
1147 elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1148 uuid=`echo "$current_partition" | cut -d'=' -f2`
1149 actual_dev=""
1150
1151 # 1st try, findfs - the RHEL way of finding labels and their partitions
1152 if [ -x "/sbin/findfs" ]; then
1153 actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1154 fi
1155
1156 # 2nd try : blkid, the good way for all UUID except swap
1157 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1158 actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1159 # For LVM FS it will give a /dev/dm-# which should then be converted
1160 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1161 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1162 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1163 for dev in `ls /dev/mapper/*`; do
1164 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1165 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1166 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1167 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1168 break
1169 fi
1170 done
1171 fi
1172 fi
1173
1174 # 3th try, with vol_id
1175 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1176 list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1177 for dev in $list_dev ; do
1178 dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1179 if [ "x$dev_exists" != "x" ]; then
1180 actual_dev=$dev
1181 break;
1182 fi
1183 done
1184 fi
1185
1186 # 4th try, with dumpuuid (VMWare only ?) for swap
1187 if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1188 list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1189 for dev in $list_dev ; do
1190 dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1191 if [ "x$dev_exists" != "x" ]; then
1192 actual_dev=$dev
1193 break;
1194 fi
1195 done
1196 fi
1197
1198 # Check if one of all those tries has known success
1199 if [ "x$actual_dev" != "x" ]; then
1200 current_partition=$actual_dev
1201 else
1202 Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1203 fi
1204 else
1205 # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1206 # they use symlinks in fstab unrelated to what is shown in mount !
1207 if [ _"$partition_mountpt" = _"" ]; then
1208 # set default in case we dont't find it
1209 for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1210 if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1211 str_to_find_fmt_with=$tmpp
1212 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1213 break;
1214 fi
1215 done
1216 fi
1217 fi
1218
1219 # Detects noauto partitions not mounted and exclude them
1220 partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1221 if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
1222 LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1223 continue
1224 fi
1225 # Detects bind partitions and exclude them
1226 if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1227 LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1228 continue
1229 fi
1230
1231 # Look for devices which have to be excluded
1232 skip=0
1233 if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1234 l=""
1235 list_of_devices="`mr-read-all-link $current_partition`"
1236 for d in $list_of_devices; do
1237 l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1238 done
1239
1240 # Remove PVs from LVs excluded
1241 l="$l `GetPVsForLV $current_partition`"
1242
1243 # We want a single unique list
1244 list_of_devices="`echo $l | sort -u`"
1245
1246 for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1247 if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1248 LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1249 skip=1
1250 continue
1251 fi
1252 done
1253 fi
1254 if [ $skip -eq 1 ]; then
1255 continue
1256 fi
1257
1258 partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1259 # Detects iso9660 ISO images and exclude them
1260 if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1261 LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1262 continue
1263 fi
1264 # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1265 # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1266 # the former is then a link to the latter, so we test whether
1267 # $current_partition is actually such a link or not and set
1268 # $current_lvolume accordingly. On Debian you may find more than one answer
1269 # so we remove the one corresponding to /dev/.static
1270 # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1271 # principle is the same and we need to find the link to it as well.
1272 # Note that $current_lvolume may well be an
1273 # ordinary device. It is just to make sure that we feed the right value
1274 # into any of the LVM tools if possible.
1275
1276 current_lvolume="$current_partition"
1277 if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1278 # .static dir are a Debian specificity
1279 current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1280 echo $current_lvolume | grep -q ' '
1281 if [ $? -eq 0 ]; then
1282 LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1283 fi
1284 # if it's not found, it may well be a real device such as a multipath one
1285 # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1286 if [ _"$current_lvolume" = _"" ]; then
1287 current_lvolume="$current_partition"
1288 fi
1289 fi
1290 #
1291 # End of LVM device style variation code (other than $current_lvolume).
1292
1293 if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1294 # Size computed via LVM not directly
1295 partition_size="lvm"
1296 else
1297 [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1298 [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1299 if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1300 # Skip swap files
1301 [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1302 partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1303 [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1304 [ "$partition_format" != "swap" ] && partition_format="swap"
1305 if [ "$partition_size" = "" ] ; then
1306 totalsize=0
1307 items=0
1308 for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1309 totalsize=$(($totalsize+$i))
1310 items=$(($items+1))
1311 done
1312 [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1313 [ "$partition_size" -lt "125000" ] && partition_size=125000
1314 LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1315 fi
1316 else
1317 partition_size=`SizeOfPartition $current_partition`
1318 fi
1319 fi
1320 [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1321 [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1322 if [ "$partition_mountpt" = "" ] ; then
1323 if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1324 if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1325 partition_mountpt="raid"
1326 partition_format="raid"
1327 else
1328 partition_mountpt="lvm"
1329 partition_format="lvm"
1330 fi
1331 fi
1332 fi
1333 psz=$partition_size
1334 LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1335 [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1336 if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1337 partition_mountpt="image"
1338 old_partition_fmt=$partition_format
1339 partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1340 partition_size=$(($partition_size+1)); # just in case
1341 if [ "$partition_format" = "Linux" ] ; then
1342 LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1343 LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1344 partition_format=$old_partition_fmt
1345 fi
1346 fi
1347
1348 if [ ! "$partition_mountpt" ] ; then
1349 LogFile "------- $FDISK -l $qq log ------------"
1350 for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1351 partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1352 [ "$partition_format" ] && break
1353 done
1354 LogFile "------- $FDISK log end ------------"
1355 if [ "$partition_format" = "Compaq diagnostics" ] ; then
1356 partition_format="compaq"
1357 elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1358 LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1359 continue
1360 fi
1361 fi
1362 if [ "$redhat_label" ]; then
1363 label="$redhat_label"
1364 elif [ "$uuid" ]; then
1365 label="$uuid"
1366 fi
1367
1368 # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1369 # in order to mount the root part e.g. in grub.
1370 # One way to solve this is to add the UUID now, if there wasn't one so it's
1371 # restored correctly
1372 if [ _"$label" = _"" ]; then
1373 label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1374 fi
1375
1376 partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1377 [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1378 unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1379 if [ "$current_partition" = "" ] ; then
1380 LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1381 elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1382 if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1383 partition_mountpt=raid
1384 partition_format=raid
1385 printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1386 printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1387 else
1388 LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1389 fi
1390 elif [ "$partition_format" = "" ] ; then
1391 LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1392 elif [ "$partition_size" = "" ] ; then
1393 LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1394 elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1395 continue
1396 else
1397 if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1398 LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1399 partition_format="vfat"
1400 fi
1401 printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1402 printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1403 fi
1404 done
1405 LogAll "-----------------------------------"
1406}
1407
1408CheckMountlist() {
1409 local file=$1
1410 # Coherency verification
1411 ML01=`cat $file | wc -l`
1412 ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1413 ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1414 ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1415 if [ "$ML01" -ne "$ML1" ]; then
1416 LogFile "--------------------------------------------"
1417 LogAll "WARNING: Duplicate device entry in mountlist"
1418 LogFile "--------------------------------------------"
1419 fi
1420 if [ "$ML02" -ne "$ML2" ]; then
1421 LogFile "--------------------------------------------"
1422 LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1423 LogFile "------------------------------------------------"
1424 fi
1425}
1426
1427OfferToMakeBootableISO() {
1428 local i old_pwd
1429 if [ -z "$ISO_CMD" ]; then
1430 LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1431 return
1432 fi
1433 if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1434 echo -en "Shall I make a bootable CD image? (y/[n]) "
1435 read i
1436 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1437 fi
1438 rm -Rf $MINDI_TMP/iso
1439 mkdir -p $MINDI_TMP/iso/{images,archives}
1440 LogFile "INFO: mindi_lib = $MINDI_LIB"
1441 cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1442 for i in memdisk memtest.bin memtest.img ; do
1443 j=$MINDI_LIB/$i
1444 k=$MINDI_TMP/iso
1445 if [ -e "$j" ] ; then
1446 LogAll "INFO: Copying $j to $k"
1447 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1448 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1449 if [ _"$MONDO_SHARE" != _"" ]; then
1450 cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1451 fi
1452 fi
1453 done
1454 MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1455 if [ $KERNEL_IS_XEN = "yes" ]; then
1456 FindMboot32Binary
1457 cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1458 cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1459 fi
1460 # Useful for syslinux 5.x
1461 FindLdlinux32Binary
1462 if [ -e $LDLINUXC32 ]; then
1463 cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1464 fi
1465 cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1466 cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1467
1468 if [ _"$MONDO_SHARE" != _"" ]; then
1469 if [ $KERNEL_IS_XEN = "yes" ]; then
1470 cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1471 cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1472 fi
1473 if [ -e $LDLINUXC32 ]; then
1474 cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1475 fi
1476 cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1477 cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1478 fi
1479 MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1480 if [ "$ARCH" != "ia64" ] ; then
1481 cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1482 fi
1483 old_pwd=`pwd`
1484 cd "$MINDI_TMP/iso"
1485 if [ "$ARCH" != "ia64" ] ; then
1486 if [ _"$MONDO_SHARE" != _"" ]; then
1487 cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1488 if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1489 cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1490 fi
1491 if [ $KERNEL_IS_XEN = "yes" ]; then
1492 cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1493 fi
1494 cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1495 fi
1496 $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1497 else
1498 $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1499 fi
1500 if [ "$?" -ne "0" ] ; then
1501 LogFile "----------- $ISO_CMD's errors --------------"
1502 LogAll "$ISO_CMD returned the following errors:"
1503 cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1504 LogAll "ERROR: Failed to create ISO image."
1505 else
1506 LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1507 fi
1508 rm -f $MINDI_TMP/mkisofs.log
1509 cd "$old_pwd"
1510}
1511
1512
1513OfferToMakeBootableUSB() {
1514 local i
1515 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1516 echo -n "Shall I make a bootable USB device ? (y/[n]) "
1517 read i
1518 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1519 if [ "$USBDEVICE" = "" ]; then
1520 echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1521 read dev
1522 USBDEVICE=$dev
1523 fi
1524 echo "WARNING: This will erase all content on $USBDEVICE"
1525 echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1526 read i
1527 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1528 fi
1529 rm -Rf $MINDI_TMP/usb
1530 mkdir -p $MINDI_TMP/usb
1531 USBPART="${USBDEVICE}1"
1532
1533 echo -en "Transforming $USBDEVICE in a Bootable device "
1534 echo -en "."
1535 LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1536 LogFile "INFO: Checking $USBDEVICE"
1537 $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1538 if [ $? -ne 0 ]; then
1539 LogAll "ERROR: Unable to access $USBDEVICE"
1540 LogAll " Make sure your USB device is plugged in"
1541 MindiExit -1
1542 fi
1543 echo -en "."
1544 # Some distro do auto mount at that point (Ubuntu)
1545 LogFile "INFO: Unmounting $USBPART just in case"
1546 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1547 # If your key has no MBR it may cause an issue
1548 # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1549 if [ -r $MBRFILE ]; then
1550 LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1551 dd if=$MBRFILE of=$USBDEVICE
1552 else
1553 LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1554 LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1555 fi
1556 LogFile "INFO: Preparing $USBDEVICE"
1557 cat > $MINDI_TMP/fdisk.txt << EOF
1558d
1559d
1560d
1561d
1562n
1563p
15641
1565
1566
1567t
1568b
1569a
15701
1571w
1572EOF
1573 $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1574 if [ $? -ne 0 ]; then
1575 LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1576 LogAll " Make sure your USB device is plugged in"
1577 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1578 MindiExit -1
1579 fi
1580 LogFile "fdisk build file"
1581 LogFile "----------------"
1582 cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1583 LogFile "----------------"
1584 rm -f $MINDI_TMP/fdisk.txt
1585 LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1586 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1587 echo -en "."
1588 # Calling kpartx in case devices were not created
1589 if [ -x "/sbin/kpartx" ]; then
1590 /sbin/kpartx -a $USBDEVICE
1591 fi
1592 # Some distro do auto mount at that point (Ubuntu)
1593 LogFile "INFO: Unmounting $USBPART just in case again"
1594 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1595 echo -en "."
1596 # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1597 if [ "`which dmsetup`" != "" ]; then
1598 block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1599 if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1600 LogFile "INFO: Removing $block_id from device mapper."
1601 sleep 1
1602 dmsetup remove $block_id
1603 fi
1604 fi
1605 echo -en "."
1606 LogFile "INFO: Creating a vfat filesystem on $USBPART"
1607 mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1608 if [ $? -ne 0 ]; then
1609 LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1610 LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1611 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1612 MindiExit -1
1613 fi
1614 echo -en "."
1615 LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1616 mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1617 if [ $? -ne 0 ]; then
1618 LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1619 LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1620 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1621 MindiExit -1
1622 fi
1623 echo -en "."
1624 mkdir -p $MINDI_TMP/usb/images
1625 cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1626 echo -en "."
1627 LogFile "INFO: mindi_lib = $MINDI_LIB"
1628 for i in memdisk memtest.bin memtest.img ; do
1629 j=$MINDI_LIB/$i
1630 k=$MINDI_TMP/usb
1631 if [ -e "$j" ] ; then
1632 LogIt "INFO: Copying $j to $k"
1633 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1634 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1635 fi
1636 done
1637 echo -en "."
1638 MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1639 echo -en "."
1640 cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1641 echo -en "."
1642 cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1643 echo -en "."
1644 MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1645 echo -en "."
1646 LogAll "----------- syslinux's conf --------------"
1647 cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1648 LogAll "------------------------------------------"
1649 umount $MINDI_TMP/usb
1650 if [ "$ARCH" != "ia64" ] ; then
1651 syslinux -v 2>&1 | grep -q 4.02
1652 if [ $? -eq 0 ]; then
1653 # This buggy version of syslinux requires a call to --stupid and not -s
1654 syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1655 res=$?
1656 else
1657 syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1658 res=$?
1659 fi
1660 if [ $res -ne 0 ] ; then
1661 LogAll "----------- syslinux's errors --------------"
1662 cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1663 LogAll "------------------------------------------"
1664 LogIt "ERROR: Failed to create USB image."
1665 else
1666 echo -e "$DONE"
1667 LogFile "INFO: Created bootable USB image on $USBDEVICE"
1668 fi
1669 rm -f $MINDI_TMP/syslinux.log
1670 else
1671 LogAll "ERROR: No USB boot support for ia64"
1672 MindiExit -1
1673 fi
1674}
1675
1676
1677MakeMessageFile() {
1678
1679 if [ -x "/bin/lsb_release" ]; then
1680 DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1681 elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1682 DESC="Arch Linux"
1683 if [ -r /var/log/pacman.log ]; then
1684 # there are no releases but we can get the last system upgrade
1685 # Output example: Arch Linux [2011-03-03 01:39]
1686 DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1687 fi
1688 elif [ -r /etc/issue.net ]; then
1689 DESC=`head -1 /etc/issue.net`
1690 elif [ -r /etc/issue ]; then
1691 DESC=`head -1 /etc/issue`
1692 elif [ -x "/usr/bin/pbdistrocheck" ]; then
1693 # For pb >= 0.9.8
1694 DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1695 else
1696 DESC="Unknown desc"
1697 fi
1698 sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1699 if [ _"$MONDO_SHARE" != _"" ]; then
1700 if [ "$CDRECOVERY" != "yes" ] ; then
1701 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1702 echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1703 echo -en "$BOOT_MEDIA_MESSAGE"
1704 elif [ ! "$MINDI_TMP" ] ; then
1705 echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1706 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1707 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1708 fi
1709 else
1710 echo -en "$BOOT_MEDIA_MESSAGE"
1711 fi
1712 else
1713 echo -en "\
1714To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1715CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1716 fi
1717 fi
1718
1719 # Also create the other help screens
1720 head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1721 head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1722 head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1723}
1724
1725
1726MakeBootConfFile() {
1727 local options i ooo
1728 options=""
1729 # Type of boot file (elilo or syslinux/isolinux)
1730 type=$1
1731 if [ "$type" = "elilo" ]; then
1732 sep="="
1733 else
1734 sep=" "
1735 fi
1736
1737 # Generic header for conf file
1738 if [ "$type" != "elilo" ] ; then
1739 echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1740 else
1741 echo -en "prompt\n"
1742 fi
1743
1744 # Compute which default option to boot from
1745 if [ "$CDRECOVERY" = "yes" ] ; then
1746 echo -en "default${sep}RESTORE\n"
1747 # In case it's mondoarchive
1748 elif [ _"$MONDO_SHARE" != _"" ]; then
1749 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1750 echo -en "default${sep}iso\n"
1751 else
1752 echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1753 fi
1754 else
1755 echo -en "default${sep}expert\n"
1756 fi
1757
1758 # Handle timeout
1759 if [ "$CDRECOVERY" != "yes" ] ; then
1760 echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1761 else
1762 echo -en "timeout${sep}10000\n"
1763 fi
1764 echo -en "\n"
1765
1766 # prepare which labels will be generated
1767 if [ "$CDRECOVERY" = "yes" ] ; then
1768 options="RESTORE expert"
1769 else
1770 if [ _"$MONDO_SHARE" != _"" ]; then
1771 options="interactive expert compare iso nuke isonuke"
1772 else
1773 options="expert"
1774 fi
1775 fi
1776
1777 # Generate rest of conf file
1778 for i in $options ; do
1779 ooo=$i
1780 [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1781 if [ "$type" = "elilo" ]; then
1782 outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1783 else
1784 ps="/"
1785 if [ "$type" = "syslinux" ]; then
1786 ps=""
1787 fi
1788 if [ $KERNEL_IS_XEN = "no" ]; then
1789 outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1790 else
1791 outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1792 fi
1793 fi
1794 echo -en "$outstr"
1795 done
1796 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1797 if [ "$type" = "elilo" ]; then
1798 echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1799 echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1800 else
1801 ps="/"
1802 if [ "$type" = "syslinux" ]; then
1803 ps=""
1804 fi
1805 echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1806 echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1807 fi
1808 fi
1809}
1810
1811
1812PrepareBootDiskImage_LILO() {
1813 local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1814 imagesdir=$MINDI_CACHE
1815 kernelpath=$1
1816
1817 retval=0
1818
1819 old_pwd=`pwd`
1820 [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1821 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1822 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1823 echo -en "..."
1824 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1825 mkdir -p $mountpoint
1826 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1827 LogFile "Creating vfat filesystem on $imagefile"
1828 mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1829 mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1830
1831 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1832 mkdir -p $mountpoint/etc
1833 liloconf=$mountpoint/elilo.conf
1834
1835 MakeBootConfFile elilo > $liloconf
1836
1837 # Copy it so that CD-ROM menu entry is satisfied
1838 mountefi=0
1839 df -T | grep /boot/efi | grep -q vfat
1840 if [ $? -ne 0 ]; then
1841 mount /boot/efi
1842 if [ $? -ne 0 ]; then
1843 echo "You have to mount your EFI partition when using mindi"
1844 MindiExit -1
1845 fi
1846 mountefi=1
1847 fi
1848 el=`find /boot/efi -name elilo.efi`
1849 cp $el $mountpoint
1850 cp $liloconf $mountpoint
1851 if [ $mountefi -eq 1 ]; then
1852 umount /boot/efi 2>&1 > /dev/null
1853 fi
1854
1855 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1856 cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1857 if [ "$?" -ne "0" ] ; then
1858 LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1859 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1860 LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1861 rm -f $MINDI_TMP/mtpt.$$
1862 LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1863 retval=$(($retval+1))
1864 fi
1865 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1866
1867 mkdir -p $mountpoint/tmp
1868 if [ -f "$MINDI_TMP/$MRCFG" ]; then
1869 cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1870 fi
1871
1872 # copy the kernel across
1873 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1874 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1875 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1876 cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1877 if [ "$?" -ne "0" ] ; then
1878 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1879 du -sk $mountpoint/* >> $LOGFILE
1880 LogFile "--- end of list of files ---"
1881 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1882 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1883 cd "$old_pwd"
1884 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1885 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1886 # losetup /dev/loop0 -d
1887 [ "$imagefile" != "" ] && rm -f $imagefile
1888 LogIt "ERROR: Sorry, your kernel is too big for your image"
1889 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1890 return 0
1891 fi
1892 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1893 LogFile "INFO: Free space left on image = $free_space KB"
1894 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1895 # make it bootable
1896 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1897 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1898 if [ "$KERN_DISK_MADE" ] ; then
1899 LogFile "INFO: Not running LILO. It's not that kind of disk."
1900 fi
1901
1902 cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1903 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1904 echo -en "..."
1905 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1906 if [ "$retval" -eq "0" ] ; then
1907 echo -en "...$DONE\n"
1908 if [ "$KERN_DISK_MADE" ] ; then
1909 LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1910 fi
1911 else
1912 echo -en "...failed\n"
1913 LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1914 [ "$imagefile" != "" ] && rm -f $imagefile
1915 fi
1916 [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1917 return $retval
1918}
1919
1920
1921PrepareBootDiskImage_ISOLINUX() {
1922 local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1923 imagesdir=$MINDI_CACHE
1924 kernelpath=$1
1925 do_boot_root_thingy=""
1926 retval=0
1927
1928 old_pwd=`pwd`
1929 [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1930 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1931 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1932 echo -en "..."
1933 imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1934 mkdir -p $mountpoint
1935 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1936 LogFile "INFO: Creating vfat filesystem on $imagefile"
1937 mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1938 # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1939 syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1940
1941 # Only move it now to its final destination and use it now
1942 mv $imagefile $imagesdir
1943 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1944
1945 mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1946
1947 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1948 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1949 MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1950 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1951 cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1952 if [ "$?" -ne "0" ] ; then
1953 LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1954 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1955 LogAll " Please unload some of your modules and try again."
1956 rm -f $MINDI_TMP/mtpt.$$
1957 LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1958 LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1959 retval=$(($retval+1))
1960 fi
1961
1962 mkdir -p $mountpoint/tmp
1963 if [ -f "$MINDI_TMP/$MRCFG" ]; then
1964 cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1965 fi
1966
1967 # copy the kernel across
1968 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1969 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1970 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1971
1972 retval=0
1973 cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1974 retval=$?
1975 if [ $KERNEL_IS_XEN = "yes" ]; then
1976 cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1977 let retval+=$?
1978 fi
1979
1980 if [ "$retval" -ne "0" ] ; then
1981 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1982 du -sk $mountpoint/* >> $LOGFILE
1983 LogFile "--- end of list of files ---"
1984 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1985 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1986 cd "$old_pwd"
1987 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1988 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1989
1990 LogIt "ERROR: Sorry, your kernel is too big for your image"
1991 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1992 fi
1993 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1994 LogFile "INFO: Free space left on image = $free_space KB"
1995 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1996
1997 # make it bootable
1998 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1999 mkdir -p $mountpoint/etc
2000 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2001 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2002 echo -en "..."
2003 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2004
2005 if [ "$retval" -eq "0" ] ; then
2006 echo -en "...$DONE\n"
2007 if [ "$KERN_DISK_MADE" ] ; then
2008 [ "$imagefile" != "" ] && rm -f $imagefile
2009 LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2010 fi
2011 else
2012 echo -en "...failed\n"
2013 LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2014 [ "$imagefile" != "" ] && rm -f $imagefile
2015 fi
2016 [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2017 return $retval
2018}
2019
2020
2021ParseModprobeForIncludes() {
2022local MODPROBE_CONF mpincfile includes include
2023
2024MODPROBE_CONF=/etc/modprobe.conf
2025mpincfile=$1
2026touch $mpincfile
2027if [ -a $MODPROBE_CONF ]; then
2028 includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2029 if [ -n "$includes" ]; then
2030 for include in $includes
2031 do
2032 if [ -a "$include" ]; then
2033 echo $include >> $mpincfile
2034 fi
2035 done
2036 fi
2037fi
2038}
2039
2040
2041PrepareDataDiskImages() {
2042 local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2043
2044 imagesdir=$MINDI_CACHE
2045 rm -f $imagesdir/mindi.iso
2046 needlist=$MINDI_TMP/what-we-need.txt
2047 bigdir=$MINDI_TMP/bigdir
2048 mkdir -p $bigdir/usr/bin
2049 mkdir -p $bigdir/usr/sbin
2050 includefile=$MINDI_TMP/$$.includefile.txt
2051
2052 lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2053 if [ -e "$DEPLIST_FILE" ]; then
2054 lfiles="$DEPLIST_FILE $lfiles"
2055 fi
2056 lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2057 ParseModprobeForIncludes $includefile
2058 lines=$(($lines+`cat $includefile | wc -l`))
2059 cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2060 res=$?
2061 rm -f $includefile
2062 ListKernelModulePaths >> $needlist
2063 if [ "$res" -ne "0" ] ; then
2064 Die "You have $res files present in dependency list\nbut absent from filesystem."
2065 fi
2066 mkdir -p $bigdir/tmp
2067 if [ _"$MONDO_SHARE" != _"" ]; then
2068 # BCO: no reason to have the cfg file stored twice
2069 MakeMondoConfigFile $MINDI_TMP/$MRCFG
2070 cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2071 fi
2072
2073 # Needs to be done after the MRCFG creation
2074 FindAndAddUserKeyboardMappingFile
2075
2076 [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2077 DropOptimizedLibraries $needlist $bigdir
2078 echo -en "Assembling dependency files"
2079
2080 CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2081
2082 # also copy io.sys and msdos.sys, if we can find them
2083 for i in `mount | cut -d' ' -f3` ; do
2084 for j in io.sys msdos.sys ; do
2085 [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2086 done
2087 done
2088
2089 # master boot record, too
2090 i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2091 if [ "$i" ] ; then
2092 LogAll "INFO: Backing up $i's MBR"
2093 dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2094 sleep 1
2095 sync
2096 j=$i
2097 [ -h "$j" ] && j=`readlink -f $j`
2098 LogAll "INFO: Creating /dev/boot_device ($j)"
2099 mkdir -p $bigdir/dev
2100 cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2101 fi
2102
2103 old_pwd=`pwd`
2104 cd "$bigdir"
2105
2106 # Get terminfo content
2107 ti="usr/share/terminfo/l"
2108 if [ -d /$ti ]; then
2109 mkdir -p $ti
2110 cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2111 fi
2112 if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2113 cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2114 [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2115 fi
2116 if [ -d "/lib/dev-state" ]; then
2117 cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2118 fi
2119 cd "$old_pwd"
2120 echo -e "$DONE"
2121 TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2122 MakeMountlist $MINDI_TMP/mountlist.txt
2123 CheckMountlist $MINDI_TMP/mountlist.txt
2124 mkdir -p $bigdir/tmp
2125 cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2126 if [ _"$MONDO_SHARE" != _"" ]; then
2127 cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2128 fi
2129 if [ $LVM != "false" ]; then
2130 $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2131 if [ "$?" -ne "0" ]; then
2132 LVM="false"
2133 rm -f $bigdir/tmp/i-want-my-lvm
2134 else
2135 LogFile "Your i-want-my-lvm file content is:"
2136 LogFile "-----------------------------------"
2137 cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2138 LogFile "-----------------------------------"
2139 fi
2140 fi
2141 LogFile "Your mountlist.txt file content is:"
2142 LogFile "-----------------------------------"
2143 cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2144 LogFile "-----------------------------------"
2145
2146 echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2147 echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2148 if [ _"$MONDO_SHARE" != _"" ]; then
2149 for q in filelist.full.gz biggielist.txt ; do
2150 [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2151 cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2152 done
2153 fi
2154
2155 echo -en "Tarring and zipping the data content..."
2156 size_of_all_tools=`du -sk $bigdir | cut -f1`
2157 (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2158 LogFile "Size of the data content"
2159 LogFile "------------------------"
2160 du -sk $imagesdir/*gz >> $LOGFILE
2161 LogFile "------------------------"
2162 echo -e "$DONE"
2163
2164 FRIENDLY_OUTSTRING="Boot and data disk images were created."
2165 rm -rf $bigdir
2166 rm -f $needlist
2167}
2168
2169
2170Prompt() {
2171 echo -en "$1"
2172 read line
2173}
2174
2175
2176ReadLine() {
2177 local i incoming
2178 read incoming
2179 i=0
2180 while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2181 i=$(($i+1))
2182 read incoming
2183 done
2184 echo "$incoming"
2185}
2186
2187
2188SizeOfPartition() {
2189 local devpath drive res stub
2190 device=$1
2191 if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2192 Die "Cannot find $device's size - is your /etc/fstab sane?"
2193 fi
2194 if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2195 res=`SizeOfRaidPartition $device`
2196 [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2197 echo "$res"
2198 return 0
2199 fi
2200 # patch from Bill <bill@iwizard.biz> - 2003/08/25
2201 res=`$FDISK -s $device 2>> $LOGFILE`
2202 # end patch
2203 # take only the first in case of multiple mount (cifs, nfs, ...)
2204 [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2205 [ "$res" = "" ] && res="-1"
2206 echo $res
2207 return 0
2208}
2209
2210
2211SizeOfRaidPartition() {
2212 local real_dev smallest_size silly tmp
2213
2214 silly=999999999
2215 smallest_size=$silly
2216
2217 for real_dev in `GetRaidDevMembers $1` ; do
2218 tmp=`SizeOfPartition $real_dev`
2219 [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2220 done
2221
2222 if [ "$smallest_size" = "$silly" ] ; then
2223 echo "-1"
2224 return 1
2225 else
2226 echo "$smallest_size"
2227 return 0
2228 fi
2229}
2230
2231
2232StripExecutable()
2233{
2234 local tmpfile
2235
2236 tmpfile=$MINDI_TMP/stripped.$$.dat
2237 [ -d "$1" ] || [ -h "$1" ] && return
2238 cp -f $1 $tmpfile 2>> $LOGFILE
2239 strip $tmpfile 2> /dev/null
2240 if [ "$?" -eq "0" ] ; then
2241 cp -f $tmpfile $1 2>> $LOGFILE
2242 LogFile "INFO: Stripped binary $2"
2243 fi
2244 rm -f $tmpfile
2245}
2246
2247KernelVer() {
2248 local fkern_ver fname
2249
2250 fname=$1
2251 file $fname | grep -q gzip
2252 if [ "$?" -eq "0" ] ; then
2253 # Used by ia64
2254 fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2255 else
2256 fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2257 fi
2258 echo "$fkern_ver"
2259}
2260
2261
2262# WARNING: This function should just echo the final result !!!
2263#
2264TryToFindKernelPath() {
2265 local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2266
2267 we_want_version=$KERVERRUN
2268 possible_kernels=""
2269 duff_kernels=""
2270 output=""
2271
2272 if [ "$ARCH" = "ia64" ] ; then
2273 root="/boot/efi/efi"
2274 else
2275 root="/"
2276 fi
2277 # See if we're booted from a Xen kernel
2278 # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2279 if [ -f /proc/xen/capabilities ]; then
2280 # It's a Xen kernel
2281 KERNEL_IS_XEN="yes"
2282 LogFile "INFO: It's a Xen kernel..."
2283 fi
2284
2285 for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2286 [ ! -e "$fname" ] && continue
2287 [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2288 fkern_ver=`KernelVer $fname`
2289 [ "$fkern_ver" = "" ] && continue
2290 [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2291 [ -f "$fname" ] || continue
2292 [ -h "$fname" ] && continue
2293 kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2294 file $fname | grep -q gzip
2295 if [ "$?" -eq "0" ] ; then
2296 # Used by ia64
2297 if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2298 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2299 duff_kernels="$fname $duff_kernels"
2300 else
2301 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2302 possible_kernels="$fname $possible_kernels"
2303 fi
2304 else
2305 if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2306 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2307 duff_kernels="$fname $duff_kernels"
2308 else
2309 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2310 possible_kernels="$fname $possible_kernels"
2311 fi
2312 fi
2313 done
2314 if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2315 possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2316 fi
2317 if [ ! "$possible_kernels" ] ; then
2318 LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2319 possible_kernels="$duff_kernels"
2320 if [ ! "$possible_kernels" ] ; then
2321 LogAll "INFO: Sorry, no duff kernels either"
2322 else
2323 LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2324 LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2325 fi
2326 fi
2327 if [ $KERNEL_IS_XEN = "yes" ]; then
2328 possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2329 noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2330 fi
2331 possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2332 noof_kernels=`CountItemsIn "$possible_kernels"`
2333 if [ "$noof_kernels" -eq "0" ] ; then
2334 LogAll "Could not find your kernel."
2335 if [ -e "/boot/vmlinuz" ] ; then
2336 LogAll "INFO: Using /boot/vmlinuz as a last resort."
2337 output=/boot/vmlinuz
2338 else
2339 output=""
2340 fi
2341 elif [ "$noof_kernels" -eq "1" ] ; then
2342 kp=`echo "$possible_kernels" | sed s/' '//`
2343 LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2344 output="$kp"
2345 else
2346 for i in $possible_kernels ; do
2347 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2348 LogAll "INFO: OK, I used my initiative and found that "
2349 LogAll "INFO: $i is probably your kernel. "
2350 output="$i"
2351 break
2352 fi
2353 done
2354 if [ ! -n "$output" ]; then
2355 if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2356 output=/boot/vmlinuz
2357 LogFile "INFO: Schlomo, this one's for you."
2358 else
2359 LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2360 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2361 LogFile "INFO: $possible_kernels"
2362 output=""
2363 fi
2364 fi
2365 fi
2366 if [ $KERNEL_IS_XEN = "yes" ]; then
2367 if [ "$noof_xenkernels" -eq "0" ]; then
2368 xenkernelpath=""
2369 elif [ "$noof_xenkernels" -eq "1" ]; then
2370 xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2371 LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2372 else
2373 for i in $possible_xenkernels ; do
2374 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2375 LogFile "INFO: OK, I used my initiative and found that "
2376 LogFile "INFO: $i is probably your Xen kernel. "
2377 xenkernelpath="$i"
2378 break
2379 fi
2380 done
2381 if [ ! -n "$xenkernelpath" ]; then
2382 new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2383 if [ ! -n "$new_possible_xenkernels" ]; then
2384 xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2385 LogFile "INFO: Using $xenkernelpath"
2386 else
2387 LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2388 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2389 LogFile "INFO: $possible_xenkernels"
2390 output=""
2391 xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2392 LogFile "INFO: Using $xenkernelpath"
2393 fi
2394 fi
2395 fi
2396 if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2397 Die "Cannot find Xen kernel $xenkernelpath, aborting"
2398 fi
2399 fi
2400 #LogAll "TryToFindKernelPath found $output"
2401 echo "$output"
2402}
2403
2404
2405TurnTgzIntoRdz() {
2406 local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2407
2408 tgz_dir_fname=$1
2409 rdz_fname=$2
2410 kernelsize=$3
2411 maxsize=$(($BOOT_SIZE-$kernelsize))
2412 maxsize=$(($maxsize*2)); # to allow for compression of 50%
2413 tempfile=$MINDI_TMP/temp.rd
2414 res=0
2415 echo -en "..."
2416 dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2417 echo -en "..."
2418 LogFile "INFO: Creating ext2 filesystem on $tempfile"
2419 mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2420 echo -en "..."
2421 mkdir -p $mountpoint
2422 mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2423 echo -en "..."
2424 old_pwd=`pwd`
2425 cd "$mountpoint"
2426
2427 # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2428 for d in bin sbin lib lib64; do
2429 if [ -h "/$d" ]; then
2430 thelink=`readlink /$d`
2431 mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2432 mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2433 if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2434 rmdir $mountpoint/$d
2435 fi
2436 if [ ! -h $mountpoint/$d ]; then
2437 rm -f $mountpoint/$d 2> /dev/null
2438 (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2439 fi
2440 fi
2441 done
2442
2443 LogFile "INFO: what is now in $mountpoint"
2444 ls -alR $mountpoint >> $LOGFILE
2445
2446 # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2447 # copy from rootfs into mountpoint
2448 for f in $tgz_dir_fname/*; do
2449 if [ ! -r $f ]; then
2450 Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2451 else
2452 cp -af $f . 2>&1 >> $LOGFILE
2453 fi
2454 done
2455 (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2456 ln -sf usr/sbin/init linuxrc
2457
2458 cd dev || Die "Can't cd to dev"
2459 tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2460 rm -f dev-entries.tgz
2461 cd ..
2462
2463 for w in insmod.static insmod.static.old ; do
2464 s=`which $w 2> /dev/null`
2465 if [ -e "$s" ] ; then
2466 tar cf - -C / $s 2> /dev/null | tar xf -
2467 fi
2468 done
2469
2470 [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2471
2472 # Copy of files mandatory for ssh to automate mount if sshfs is used
2473 mkdir -p $mountpoint/.ssh $mountpoint/tmp
2474 cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2475 cat > $mountpoint/tmp/myssh << EOF
2476ssh -o StrictHostKeyChecking=no $*
2477EOF
2478 chmod 755 $mountpoint/tmp/myssh
2479
2480 # Copy of files mandatory for ld.so
2481 cp -a /etc/ld.so.c* $mountpoint/etc
2482
2483 # Handle the case where busybox and mount are dynamically linked
2484 file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically"
2485 if [ $? -eq 0 ]; then
2486 # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2487 rm -f bin/mount
2488 fi
2489
2490 # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2491 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2492 for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2493 if [ -d $f ]; then
2494 for g in `find $f`; do
2495 echo $g >> $MINDI_TMP/minimal.lis
2496 LocateDeps $g >> $MINDI_TMP/minimal2.lis
2497 done
2498 else
2499 if [ -r $f ]; then
2500 echo $f >> $MINDI_TMP/minimal.lis
2501 LocateDeps $f >> $MINDI_TMP/minimal2.lis
2502 fi
2503 fi
2504 done
2505 for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2506 mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2507 done
2508 # Initial / are trucated by tar
2509 finallist=""
2510 # Remove directories from the list, as tar/cp will create them anyway
2511 # and it may hurt if /lib is in it as on Debian/Ubuntu
2512 # recent bash says that -d is true for a link to a dir !
2513 for f in `sort -u $MINDI_TMP/minimal.lis`; do
2514 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2515 # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2516 if [ ! -e "$mountpoint/$f" ]; then
2517 finallist="$finallist $f"
2518 fi
2519 fi
2520 done
2521 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2522
2523 #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2524 echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2525 cp -a --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2526
2527 # In case target /bin dir still doesn't exist, create it before using it
2528 if [ ! -d $mountpoint/bin ]; then
2529 mkdir -p $mountpoint/bin
2530 fi
2531
2532 # For older distributions expecting /sbin/init provides it
2533 if [ ! -e sbin/init ]; then
2534 (cd sbin ; ln -sf ../usr/sbin/init .)
2535 fi
2536
2537 # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2538 ln -sf /bin/bash bin/sh
2539 LogIt "INFO: Using bash as default shell"
2540
2541 # Avoids an issue on some distro (RHEL5)
2542 rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2543
2544 mkdir -p $mountpoint/tmp
2545 # Management of udev (which includes modprobe in rules)
2546 ps auxww | grep -v grep | grep -qw udevd
2547 if [ $? -eq 0 ]; then
2548 echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2549 LogIt "INFO: udev device manager found"
2550 tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2551 # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2552 rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2553 # Do not do it if it's a link (Ubuntu 64 bits #503)
2554 if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2555 tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2556 fi
2557 if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2558 tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2559 fi
2560 if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2561 tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2562 fi
2563 if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
2564 tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2565 fi
2566 if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2567 lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2568 lis=""
2569 # Get only the files which exist in that list
2570 # and potentially their symlink structure
2571 for i in $lis2; do
2572 if [ -h $i ]; then
2573 j=$i
2574 while [ -h $j ]; do
2575 lis="$lis $j"
2576 j=`readlink -f $j`
2577 done
2578 lis="$lis $j"
2579 elif [ -f $i ]; then
2580 lis="$lis $i"
2581 fi
2582 done
2583 # And their deps
2584 LocateDeps $lis > $MINDI_TMP/udev.lis
2585 for i in $lis; do
2586 if [ "`echo $i | cut -c1`" = "/" ]; then
2587 j=`echo $i | cut -c2-`
2588 [ "$j" != "" ] && rm -f $j
2589 fi
2590 echo "$i" >> $MINDI_TMP/udev.lis
2591 done
2592 finallist=""
2593 # Remove directories from the list, as tar/cp will create them anyway
2594 # and it may hurt if /lib is in it as on Debian/Ubuntu
2595 # recent bash says that -d is true for a link to a dir !
2596 for f in `sort -u $MINDI_TMP/udev.lis`; do
2597 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2598 # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2599 if [ ! -e "$mountpoint/$f" ]; then
2600 finallist="$finallist $f"
2601 fi
2602 fi
2603 done
2604 #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2605 echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2606 cp -a --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2607 rm -f $MINDI_TMP/udev.lis
2608 else
2609 LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2610 LogAll " mindi will use static devices which may cause problems"
2611 rm -f $mountpoint/tmp/USE-UDEV
2612 fi
2613 fi
2614
2615 # Management of potential HW info (ProLiant only at the moment)
2616 rm -rf $MINDI_CACHE/bkphw
2617 mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2618 if [ -d $MINDI_CACHE/bkphw ]; then
2619 LogIt "INFO: Hardware Information found and saved ..."
2620 cp -rp $MINDI_CACHE/bkphw .
2621 if [ -f $MINDI_CACHE/tools.files ]; then
2622 lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2623 LocateDeps $lis > $MINDI_TMP/tools.lis
2624 tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2625 fi
2626 if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2627 mv -f $MINDI_CACHE/mindi-rsthw .
2628 chmod 755 ./mindi-rsthw
2629 fi
2630 rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2631 fi
2632
2633 # Management of perl scripts delivered needed at restore time
2634 LogIt "INFO: Analyzing perl modules dependencies" $MINDI_TMP/$$.log
2635 mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2>> $MINDI_TMP/$$.log > $MINDI_TMP/perl.lis
2636 LogIt "DBG4: Modules found:" $MINDI_TMP/$$.log
2637 LogIt "--------------------" $MINDI_TMP/$$.log
2638 cat $MINDI_TMP/perl.lis >> $MINDI_TMP/$$.log
2639 LogIt "--------------------" $MINDI_TMP/$$.log
2640 tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2641
2642 for w in cdrom groovy-stuff ; do
2643 mkdir -p mnt/$w
2644 done
2645
2646 tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2647
2648 echo -en "..."
2649 cd /
2650
2651 needed_modules=""
2652 list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2653
2654 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2655 # For PXE boot
2656 list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2657 fi
2658 for i in $DENY_MODS; do
2659 LogFile "INFO: Removing $i from the list of modules to load"
2660 list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2661 done
2662
2663 if [ "${kernelname}" != "" ]; then
2664 needed_modules_path=lib/modules/${kernelname}
2665 mkgmopt="-k ${kernelname}"
2666 else
2667 needed_modules_path=lib/modules/$KERVERRUN
2668 mkgmopt="-k $KERVERRUN"
2669 fi
2670
2671 [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
2672 needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2673
2674 LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2675 cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2676
2677 # Uncompress modules if not using udev and native modprobe
2678 if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2679 for i in $needed_modules; do
2680 if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2681 gunzip -f $mountpoint/$i
2682 fi
2683 if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2684 bunzip2 -f $mountpoint/$i
2685 fi
2686 if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2687 unxz -f $mountpoint/$i
2688 fi
2689 LogFile "INFO: Uncompressing $i"
2690 done
2691 fi
2692
2693 # Also copy modules.* in case of udev so that normal modprobe works
2694 tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2695
2696 # Copy FW in case some drivers needs it
2697 for d in "/lib" "/usr/lib"; do
2698 if [ -d "$d/firmware" -a ! -h $d ]; then
2699 cp -a "$d/firmware" "$mountpoint/$d"
2700 fi
2701 done
2702
2703 # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2704 for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2705 if [ -d "$d/multipath" -a ! -h $d ]; then
2706 cp -a "$d/multipath" "$mountpoint/$d"
2707 fi
2708 done
2709
2710 # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2711 (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2712
2713 # Copy an additional ProLiant tool for OBDR support
2714 if [ -f $MINDI_TMP/OBDR ]; then
2715 found=0
2716 if [ -x /usr/bin/hpsa_obdr_mode ]; then
2717 mkdir -p $mountpoint/usr/bin
2718 cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2719 LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2720 found=1
2721 fi
2722 if [ -x /usr/bin/sg_wr_mode ]; then
2723 mkdir -p $mountpoint/usr/bin
2724 lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2725 LocateDeps $lis > $MINDI_TMP/obdr.lis
2726 (cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2727 LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2728 found=1
2729 fi
2730 if [ $found -eq 0 ]; then
2731 LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2732 LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2733 fi
2734 fi
2735
2736 if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2737 LogFile "INFO: Deleting devfsd daemon from ramdisk"
2738 [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2739 rm -f $mountpoint/sbin/devfsd
2740 fi
2741 cd "$old_pwd"
2742 [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2743 if [ _"$MONDO_SHARE" != _"" ]; then
2744 MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2745 cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2746 cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2747 echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2748 echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2749 fi
2750
2751 # Create module list to load at restore time
2752 rm -f $mountpoint/tmp/modules
2753 for m in $CDROM_MODS; do
2754 echo $m >> $mountpoint/tmp/modules
2755 done
2756
2757 mkdir -p $mountpoint/proc
2758 LogFile "---------------------------"
2759 LogFile "Size of initial ramdisk:"
2760 LogFile "---------------------------"
2761 (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2762 LogFile "---------------------------"
2763 LogFile "Content of initial ramdisk:"
2764 LogFile "---------------------------"
2765 (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2766 LogFile "---------------------------"
2767
2768 # Determine what filesystem to use for initrd image
2769 LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2770 gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2771 [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2772 if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2773 # say what will be used
2774 LogFile "INFO: Creating an $gvFileSystem initrd image..."
2775 # kernel expects linuxrc in ext2 filesystem
2776 ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2777 # unmount loop filesystem and create image file using the standard approach
2778 umount $mountpoint || Die "Cannot unmount $tempfile"
2779 dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2780 if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2781 bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2782 else
2783 bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2784 fi
2785 MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2786 gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2787 rm -f ${rdz_fname}.tmp
2788 # log that we are done
2789 LogFile " ...done."
2790 elif [ "$gvFileSystem" = "initramfs" ]; then
2791 # say what will be used
2792 LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2793 # make sure that cpio is there
2794 which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2795 # go into filesystem
2796 cd "$mountpoint"
2797 # kernel expects init in cpio filesystem
2798 ln -sf usr/sbin/init init
2799 # create cpio image file and unmount loop filesystem
2800 find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2801 cd "$old_pwd"
2802 umount $mountpoint || Die "Cannot unmount $tempfile"
2803 # log that we are done
2804 LogFile " ...done."
2805 else
2806 Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2807 fi
2808
2809 if [ "$res" -eq "0" ] ; then
2810 echo -en "..."
2811 else
2812 echo -en "\rMade an rdz WITH ERRORS. \n"
2813 fi
2814 return 0
2815}
2816
2817
2818##############################################################################
2819#----------------------------------- Main -----------------------------------#
2820##############################################################################
2821
2822# Now we can create what we need
2823mkdir -p $MINDI_TMP
2824
2825# --nolog needs to be first, and is used in analyze-my-lvm
2826if [ "$1" = "--nolog" ] ; then
2827 shift
2828 LOGFILE=/dev/stderr
2829else
2830 > $LOGFILE
2831fi
2832if [ "$1" = "--printvar" ] ; then
2833 shift
2834 if [ _"$1" != _"" ] ; then
2835 set | grep -Ew "^$1" | cut -d= -f2
2836 fi
2837 exit 0
2838fi
2839
2840LogFile "mindi v$MINDI_VERSION"
2841LogFile "$ARCH architecture detected"
2842LogFile "mindi called with the following arguments:"
2843echo "$@">> $LOGFILE
2844LogFile "Start date : `date`"
2845LogFile "-----------------------------"
2846
2847[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2848
2849# Log some capital variables
2850[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2851[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2852LogFile "MONDO_SHARE = $MONDO_SHARE"
2853LogFile "MINDI_LIB = $MINDI_LIB"
2854LogFile "MINDI_SBIN = $MINDI_SBIN"
2855LogFile "MINDI_CONF = $MINDI_CONF"
2856# Purge from potential old run
2857if [ _"$MINDI_CACHE" = _"" ]; then
2858 Die "MINDI_CACHE undefined"
2859else
2860 LogFile "MINDI_CACHE = $MINDI_CACHE"
2861fi
2862
2863if [ -f $MINDI_CONFIG ]; then
2864 LogFile "-----------------------------"
2865 LogFile " Mindi configuration file "
2866 LogFile "-----------------------------"
2867 grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2868 LogFile "-----------------------------"
2869fi
2870LogFile "In Mindi"
2871LogFile "--------"
2872LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2873LogFile "BOOT_SIZE = $BOOT_SIZE"
2874LogFile "--------"
2875
2876trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2877
2878# Sanity checks
2879which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2880which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2881which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2882which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2883if which awk &> /dev/null ; then
2884 if ! which gawk &> /dev/null ; then
2885 LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2886 fi
2887fi
2888which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2889[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2890
2891[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2892
2893# Update the PATH variable if incomplete
2894if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2895 PATH=$PATH:/sbin:/usr/sbin
2896 export PATH
2897 LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2898 LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2899 LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2900fi
2901
2902if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2903 Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2904fi
2905
2906### TODO
2907### Fix as it's not mandatory on ia64
2908if [ "$ARCH" = "ia64" ] ; then
2909 if which elilo &> /dev/null ; then
2910 LILO_EXE=elilo
2911 else
2912 LILO_EXE=`which false 2> /dev/null`
2913 fi
2914else
2915 FindIsolinuxBinary
2916fi
2917trap "Aborted" SIGTERM
2918DONE="\r\t\t\t\t\t\t\t\tDone. "
2919kernelpath=""
2920MONDO_ROOT=/var/cache/mondo
2921mkdir -p $MONDO_ROOT
2922
2923if [ -d "/proc/lvm" ]; then
2924 # LVM v1
2925 LVMCMD=""
2926 LVM="v1"
2927elif [ -d "/dev/mapper" ]; then
2928 # LVM v2
2929 LVMCMD="lvm"
2930 LVM="v2"
2931else
2932 LVM="false"
2933fi
2934
2935if [ -e "/proc/cmdline" ]; then
2936 CMDLINE="/proc/cmdline"
2937elif [ -e "/tmp/cmdline" ]; then
2938 CMDLINE="/tmp/cmdline"
2939else
2940 CMDLINE="/dev/null"
2941fi
2942
2943LogFile "INFO: LVM set to $LVM"
2944LogFile "----------"
2945LogFile "mount result:"
2946LogFile "-------------"
2947mount >> $LOGFILE
2948if [ -e /etc/raidtab ]; then
2949 LogFile "-------------"
2950 LogFile "/etc/raidtab content:"
2951 LogFile "-------------"
2952 cat /etc/raidtab >> $LOGFILE
2953else
2954 LogFile "No file /etc/raidtab"
2955fi
2956if [ -e /etc/mdadm.conf ]; then
2957 LogFile "-------------"
2958 LogFile "/etc/mdadm.conf content:"
2959 LogFile "-------------"
2960 cat /etc/mdadm.conf >> $LOGFILE
2961else
2962 LogFile "-------------"
2963 LogFile "No file /etc/mdadm.conf"
2964fi
2965LogFile "-------------"
2966LogFile "cat $CMDLINE"
2967LogFile "-------------"
2968cat $CMDLINE >> $LOGFILE
2969LogFile "-------------"
2970LogFile "cat /proc/swaps:"
2971LogFile "-------------"
2972cat /proc/swaps >> $LOGFILE
2973LogFile "-------------"
2974if [ -e /proc/mdstat ]; then
2975 LogFile "cat /proc/mdstat:"
2976 LogFile "-------------"
2977 cat /proc/mdstat >> $LOGFILE
2978else
2979 LogFile "No pseudo file /proc/mdstat"
2980fi
2981LogFile "-------------"
2982LogFile "cat /proc/partitions:"
2983LogFile "-------------"
2984cat /proc/partitions >> $LOGFILE
2985LogFile "-------------"
2986LogFile "cat /proc/filesystems:"
2987LogFile "-------------"
2988cat /proc/filesystems >> $LOGFILE
2989LogFile "-------------"
2990LogFile "lsmod result:"
2991LogFile "-------------"
2992lsmod >> $LOGFILE
2993MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2994if [ -x /usr/sbin/esxcfg-module ]; then
2995 LogFile "-------------"
2996 LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2997 LogFile "-------------"
2998 LogFile "VMWare modules"
2999 LogFile "-------------"
3000 /usr/sbin/esxcfg-module -l >> $LOGFILE
3001 MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3002fi
3003LogFile "-------------"
3004LogFile "FORCE_MODS:"
3005LogFile "-------------"
3006LogFile "$FORCE_MODS"
3007LogFile "-------------"
3008LogFile "DENY_MODS:"
3009LogFile "-------------"
3010LogFile "$DENY_MODS"
3011LogFile "-------------"
3012LogFile "df result:"
3013LogFile "----------"
3014df -aT >> $LOGFILE
3015LogFile "-------------"
3016LogFile "df -i result:"
3017LogFile "----------"
3018df -i >> $LOGFILE
3019LogFile "-------------"
3020if [ -r /boot/grub/menu.lst ]; then
3021 LogFile "-------------"
3022 LogFile "INFO: /boot/grub/menu.lst content"
3023 LogFile "-------------"
3024 cat /boot/grub/menu.lst >> $LOGFILE
3025 LogFile "-------------"
3026fi
3027if [ -r /boot/grub/grub.conf ]; then
3028 LogFile "-------------"
3029 LogFile "INFO: /boot/grub/grub.conf content"
3030 LogFile "-------------"
3031 cat /boot/grub/grub.conf >> $LOGFILE
3032 LogFile "-------------"
3033fi
3034if [ -r /boot/grub/grub.cfg ]; then
3035 LogFile "-------------"
3036 LogFile "INFO: /boot/grub/grub.cfg content"
3037 LogFile "-------------"
3038 cat /boot/grub/grub.cfg >> $LOGFILE
3039 LogFile "-------------"
3040fi
3041if [ -r /boot/grub/device.map ]; then
3042 LogFile "-------------"
3043 LogFile "INFO: /boot/grub/device.map content"
3044 LogFile "-------------"
3045 cat /boot/grub/device.map >> $LOGFILE
3046 LogFile "-------------"
3047fi
3048if [ -r /etc/lilo.conf ]; then
3049 LogFile "-------------"
3050 LogFile "INFO: /etc/lilo.conf content"
3051 LogFile "-------------"
3052 cat /etc/lilo.conf >> $LOGFILE
3053fi
3054if [ -d /boot/efi ]; then
3055 gcf=`find /boot/efi -name grub.conf`
3056 if [ _"$gcf" = _"" ]; then
3057 LogFile "Found a /boot/efi directory without a grub.conf file in it"
3058 else
3059 LogFile "-------------"
3060 LogFile "INFO: $gcf content"
3061 LogFile "-------------"
3062 cat $gcf >> $LOGFILE
3063 LogFile "-------------"
3064 fi
3065fi
3066
3067LogFile "Full fdisk info"
3068LogFile "---------------"
3069$FDISK -l >> $LOGFILE
3070LogFile "----------------"
3071
3072# Compute libata version
3073laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
3074# If libata v2 is used then remove ide-generic as it will perturbate boot
3075if [ "`echo $MODULES | grep libata`" ]; then
3076 if [ "$laver" = "2" ]; then
3077 DENY_MODS="$DENY_MODS ide-generic"
3078 LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3079 LogFile "-------------"
3080 fi
3081fi
3082
3083# Check for McAfee which disturbs the access to some files (tgz in articular)
3084if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3085 LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3086 LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3087 LogFile "WARNING: You have two options:"
3088 LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3089 LogFile "WARNING: - Disable the scanner during the backup"
3090fi
3091
3092# Check for ISO_CMD command
3093if [ ! -x $ISO_CMD ]; then
3094 LogFile "NOTE: No CD image (ISO file) utility found"
3095fi
3096
3097FLOPPY_WAS_MOUNTED=""
3098for mtpt in /media/floppy /mnt/floppy /floppy ; do
3099 if mount | grep -w $mtpt &> /dev/null ; then
3100 FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3101 umount $mtpt
3102 fi
3103done
3104
3105#
3106# If we have a USB device we need to store info
3107# and remove it from the parameters line
3108#
3109if [ "$#" -ne "0" ] ; then
3110 if [ "$1" = "--usb" ] ; then
3111 shift
3112 USBDEVICE=$1
3113 if [ _"$USBDEVICE" = _"" ]; then
3114 Die "No USB device specified"
3115 fi
3116 shift
3117 fi
3118fi
3119
3120if [ "$#" -ne "0" ] ; then
3121 if [ "$1" = "--findkernel" ] ; then
3122 resk=`TryToFindKernelPath`
3123 # Avoids logfile content for mondo
3124 export MONDO_SHARE=""
3125 if [ "$resk" = "" ] ; then
3126 if [ $KERNEL_IS_XEN = "yes" ]; then
3127 echo "$xenkernelpath"
3128 LogFile "INFO: xenkernelpath = $xenkernelpath"
3129 MindiExit 0
3130 else
3131 MindiExit -1
3132 fi
3133 else
3134 echo "$resk"
3135 LogFile "INFO: kernelpath = $resk"
3136 MindiExit 0
3137 fi
3138 elif [ "$1" = "--locatedeps" ] ; then
3139 [ ! "$2" ] && Die "Please specify the binary to look at"
3140 LocateDeps $*
3141 # Avoids logfile content for mondo
3142 export MONDO_SHARE=""
3143 MindiExit $?
3144 elif [ "$1" = "--readalllink" ] ; then
3145 [ ! "$2" ] && Die "Please specify the binary to look at"
3146 # Avoids logfile content for mondo
3147 export MONDO_SHARE=""
3148 mr-read-all-link $2
3149 MindiExit $?
3150 elif [ "$1" = "--makemessage" ] ; then
3151 MakeMessageFile | cut -c1-80
3152 MindiExit 0
3153 elif [ "$1" = "--makemountlist" ] ; then
3154 [ ! "$2" ] && Die "Please specify the output file"
3155 MakeMountlist $2
3156 CheckMountlist $2
3157 # Avoids logfile content for mondo
3158 export MONDO_SHARE=""
3159 MindiExit $?
3160 elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3161 echo "Mindi v$MINDI_VERSION"
3162 # Avoids logfile content for mondo
3163 export MONDO_SHARE=""
3164 MindiExit 0
3165 elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3166 MONDO_TMP=$2
3167 # Change MINDI_TMP for the one provided by mondo
3168 # So that it can get back the built files
3169 if [ _"$MONDO_TMP" = _"" ]; then
3170 Die "MONDO_TMP is empty, aborting"
3171 fi
3172 if [ _"$MONDO_TMP" = _"/" ]; then
3173 Die "MONDO_TMP is /, aborting"
3174 fi
3175 mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3176 rmdir $MINDI_TMP
3177 export MINDI_TMP=$MONDO_TMP
3178 mkdir -p $MINDI_TMP
3179
3180 # This is the scratch dir in mondo - subdir images
3181 MINDI_CACHE=$3
3182 LogFile "MINDI_CACHE = $MINDI_CACHE"
3183
3184 kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3185 [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3186
3187###
3188### Sq-Modification...
3189### Attempt to locate kernel specific module path
3190### if module path is found then use it other wise use uname -r to set it...
3191###
3192 if [ $KERNEL_IS_XEN = "yes" ]; then
3193 LogAll "INFO: xenkernelpath = $xenkernelpath"
3194 fi
3195 kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3196 if [ ! -d "/lib/modules/$kernelname" ]; then
3197 LogAll "WARNING: Module path for ${kernelpath} not found..."
3198 LogAll " using running kernel\'s modules."
3199 kernelname=$KERVERRUN
3200 else
3201 LogAll "Using modules for kernel: ${kernelname}"
3202 fi
3203 LogAll "INFO: kernelname = $kernelname"
3204 LogAll "INFO: kernelpath = $kernelpath"
3205###
3206### end of Sq-Modification
3207###
3208 TAPEDEV=$5
3209 TAPESIZE=$6
3210 FILES_IN_FILELIST=$7
3211 USE_LZO=$8
3212 CDRECOVERY=$9
3213 if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3214 IMAGE_DEVS=""
3215 else
3216 IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3217 fi
3218 if [ "${11}" ] ; then
3219 LILO_OPTIONS=""
3220 # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3221 fi
3222 LAST_FILELIST_NUMBER=${12}
3223 ESTIMATED_TOTAL_NOOF_SLICES=${13}
3224 export MINDI_EXCLUDE_DEVS="${14}"
3225 USE_COMP="${15}"
3226 USE_LILO="${16}"
3227 USE_STAR="${17}"
3228 INTERNAL_TAPE_BLOCK_SIZE="${18}"
3229 DIFFERENTIAL="${19}"
3230 USE_GZIP="${20}"
3231 USE_LZMA="${21}"
3232 NOT_BOOT="${22}"
3233 [ "$USE_COMP" = "" ] && USE_COMP=yes
3234 [ "$USE_GZIP" = "" ] && USE_GZIP=no
3235 [ "$USE_LZMA" = "" ] && USE_LZMA=no
3236 [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3237 [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3238 # MONDO_ROOT is the real scratchdir
3239 MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3240 if [ _"$MONDO_ROOT" != _"" ]; then
3241 mkdir -p $MONDO_ROOT
3242 else
3243 Die "MONDO_ROOT is undefined"
3244 fi
3245 else
3246 LogScreen "Syntax: mindi (--custom ....)"
3247 MindiExit -1
3248 fi
3249fi
3250
3251if [ _"$MINDI_CACHE" != _"" ]; then
3252 rm -rf $MINDI_CACHE/* 2> /dev/null
3253 mkdir -p $MINDI_CACHE
3254fi
3255
3256[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3257
3258if [ _"$MONDO_SHARE" = _"" ]; then
3259 LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3260 LogIt "Latest Mindi is available from http://www.mondorescue.org"
3261 LogIt "BusyBox sources are available from http://www.busybox.net"
3262 LogIt "------------------------------------------------------------------------------"
3263else
3264 LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3265fi
3266if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3267 LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3268else
3269 LogIt "ERROR: Unable to find mindi-busybox, please install it"
3270 MindiExit -1
3271fi
3272
3273for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3274 modinfo $i 2> /dev/null 1> /dev/null
3275 if [ $? -eq 0 ]; then
3276 modprobe $i 2>&1 > /dev/null
3277 fi
3278done
3279
3280KERN_DISK_MADE=""
3281
3282LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3283LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3284LogFile "NOT_BOOT = '$NOT_BOOT'"
3285if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3286 LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3287 MakeMondoConfigFile $MINDI_TMP/$MRCFG
3288 MakeMountlist $MINDI_TMP/mountlist.txt
3289 CheckMountlist $MINDI_TMP/mountlist.txt
3290 mkdir -p $MINDI_TMP/small-all/tmp
3291 cd "$MINDI_TMP/small-all"
3292 cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3293 tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3294 sleep 2
3295 LogIt "Done. Exiting."
3296 MindiExit 0
3297fi
3298
3299if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3300 LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3301fi
3302
3303if [ "$kernelpath" = "" ] ; then
3304 [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3305 echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3306 read ch
3307 if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3308 USE_OWN_KERNEL="yes"
3309 else
3310 USE_OWN_KERNEL="no"
3311 fi
3312 if [ "$USE_OWN_KERNEL" = "yes" ]; then
3313 kernelpath=`TryToFindKernelPath`
3314 if [ "$kernelpath" = "" ] ; then
3315 echo -n "Please enter kernel path : "
3316 read kernelpath
3317 fi
3318 fi
3319fi
3320
3321echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3322[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3323
3324mountpoint=$MINDI_TMP/mountpoint.$$
3325PrepareDataDiskImages
3326
3327export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3328
3329LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3330if [ "$ARCH" = "ia64" ] ; then
3331 PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3332else
3333 PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3334fi
3335
3336[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3337...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3338
3339if [ _"$MONDO_SHARE" = _"" ]; then
3340 ListImagesForUser
3341 OfferToMakeBootableISO
3342 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3343 OfferToMakeBootableUSB
3344 fi
3345 LogAll "Finished."
3346elif [ "$TAPEDEV" ] ; then
3347 if [ "$ARCH" != "ia64" ] ; then
3348 # We need to keep the img file as boot file for ia64 platform
3349 rm -f $MINDI_CACHE/{*img,*iso}
3350 else
3351 rm -f $MINDI_CACHE/*iso
3352 fi
3353 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3354 OfferToMakeBootableUSB
3355 fi
3356 OfferToMakeBootableISO
3357 if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3358 cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3359 else
3360 Die "Cannot find all.tar.gz, to be written to tape"
3361 fi
3362elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3363 OfferToMakeBootableUSB
3364else
3365 OfferToMakeBootableISO
3366fi
3367
3368if [ -f $MINDI_TMP/$MRCFG ]; then
3369 LogIt "INFO: Your $MRCFG file is:"
3370 cat $MINDI_TMP/$MRCFG >> $LOGFILE
3371else
3372 LogIt "ERROR: You don't have a $MRCFG file !"
3373fi
3374# cleanup
3375LogAll "INFO: $FRIENDLY_OUTSTRING"
3376for mtpt in $FLOPPY_WAS_MOUNTED ; do
3377 mount $mtpt
3378done
3379MindiExit 0
Note: See TracBrowser for help on using the repository browser.