source: MondoRescue/branches/3.2/mindi/mindi@ 3353

Last change on this file since 3353 was 3353, checked in by Bruno Cornec, 9 years ago
  • Fix #748 by solving interface issues between mondoarchive and mindi
  • Improve kernel 3.14+ detection for initramfs
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 120.4 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3353 2015-03-03 12:32:45Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000 # increase if you run out of ramdisk space
44BOOT_SIZE=65600 # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47 # Ask if you want to make a CD Image to be written?
48 # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51 # Ask if you want to make a USB Image to be written?
52 # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55 # If set to "no", you will be prompted for whether or not
56 # you want to use your own kernel, or the supplied default.
57 # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60 # If set to "no", the kernel is not a Xen kernel
61 # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio hv_storvsc"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107 . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119 ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125 if [ -e /dev/stderr ] ; then
126 echo -e "$1" >> /dev/stderr
127 elif [ -e /usr/bin/logger ] ; then
128 /usr/bin/logger -s $1
129 fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135 echo -e "$1" >> $LOGFILE
136 if [ _"$2" != _"" ]; then
137 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138 fi
139 rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144 LogScreen "$1"
145 LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150 LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157 LogFile "Mindi $MINDI_VERSION is exiting"
158 LogFile "End date : `date`"
159 if [ _"$MONDO_SHARE" != _"" ] ; then
160 echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161 if [ -f $LOGFILE ]; then
162 cat $LOGFILE >> /var/log/mondoarchive.log
163 else
164 echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
165 fi
166 echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167 fi
168
169 cd /
170 sync&
171
172 # Clean temporary files only when standalone mindi
173 if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174 rm -Rf $MINDI_TMP
175 fi
176 exit $1
177}
178
179Die() {
180 local i
181 if [ "$1" = "" ] ; then
182 LogAll "FATAL ERROR"
183 else
184 LogAll "FATAL ERROR. $1"
185 fi
186 if [ _"$2" != _"" ]; then
187 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188 fi
189 rm -f "$2"
190
191 LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192 LogAll "See http://www.mondorescue.org for more information."
193 LogAll "WE CANNOT HELP unless you enclose that file.\n"
194 MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200 df $TMPDIR
201 Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204 Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207 Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215 [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216 Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221 trap SIGHUP SIGTERM SIGTRAP SIGINT
222 [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223 Die "User abort."
224}
225
226
227AddFileToCfgIfExists() {
228 [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
229}
230
231
232AddKeyboardMappingFile() {
233 local mappath r included_list included_item i res ii sss
234 mappath=$1
235 KBDEPTH=$(($KBDEPTH+1))
236 [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
237 if [ -e "$bigdir/$mappath" ] ; then
238 LogFile "INFO: $mappath already added"
239 return
240 elif [ -d "$bigdir/$mappath" ] ; then
241 echo "Cannot add $mappath: it's a directory. Sorry."
242 return
243 fi
244 LogFile "INFO: Added kbd map $mappath"
245 if [ ! -e "$mappath" ] ; then
246 mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
247 if [ ! -e "$mappath" ] ; then
248 LogAll "WARNING: Cannot add $mappath: kbd map file not found"
249 return
250 fi
251 else
252 echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
253 fi
254
255 #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
256 tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257 if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258 included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259 else
260 included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261 fi
262 for included_item in $included_list ; do
263 if [ ! -e "$included_item" ] ; then
264 sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265 [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266 for ii in $sss ; do
267 [ -e "$ii" ] && AddKeyboardMappingFile $ii
268 done
269 else
270 AddKeyboardMappingFile $included_item
271 fi
272 done
273}
274
275
276CopyDependenciesToDirectory() {
277 local outdir incoming counter d found tdir
278 outdir=$1
279 mkdir -p $outdir
280 incoming=`ReadLine`
281 counter=0
282 while [ "$incoming" != "" ] ; do
283 # Non absolute file names should not arrive till here => skipped
284 if [ `echo "$incoming" | cut -c1` != '/' ]; then
285 LogAll "WARNING: Unable to handle $incoming"
286 incoming=`ReadLine`
287 continue
288 fi
289 # no parent directory of incoming should be a link, copy is not possible in that case
290 d=`dirname "$incoming"`
291 found="false"
292 while [ $d != "/" -a $found = "false" ]; do
293 [ -h "$d" ] && found="true"
294 d=`dirname "$d"`
295 done
296 if [ -d "$incoming" -a ! -h "$incoming" ]; then
297 find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298 elif [ -e "$incoming" ] && [ $found = "false" ]; then
299 if [ ! -h "$incoming" ]; then
300 tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301 else
302 tdir=`dirname "$incoming"`
303 if [ ! -e "$outdir/$tdir" ]; then
304 mkdir -p "$outdir/$tdir"
305 fi
306 cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307 fi
308 # Only uncompress modules if not using udevd
309 if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310 gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311 fi
312 [ -x "$outdir" ] && StripExecutable $outdir
313 counter=$(($counter+1))
314 LogProgress $counter $2
315 fi
316 incoming=`ReadLine`
317 done
318}
319
320
321CountItemsIn() {
322 local r
323 r=0
324 for q in $1 ; do
325 r=$(($r+1))
326 done
327 echo $r
328}
329
330
331DropOptimizedLibraries() {
332 local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333 filelist=$1
334 outdir=$2
335
336 list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337 if [ "$list_of_optimized_libraries" = "" ] ; then
338 return 0
339 fi
340 echo -en "Dropping i686-optimized libraries if appropriate"
341 for optimized_lib_name in $list_of_optimized_libraries ; do
342 echo -en "."
343 reason=""
344 vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345 echo "$vanilla_lib_name" >> $filelist
346 LogFile "INFO: Adding $vanilla_lib_name to filelist"
347 mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348 rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350 # This may return multiple files
351 for resolved in `mr-read-all-link $vanilla_lib_name`; do
352 LogFile "INFO: Adding as deps $resolved to filelist"
353 vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354 if [ "$vanilla_resolved_name" != "$resolved" ]; then
355 mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356 rmdir $outdir$resolved > /dev/null 2> /dev/null
357 ln -sf $vanilla_resolved_name $outdir$resolved
358 LogFile "INFO: Excluding deps $resolved"
359 grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360 LogFile "INFO: Replacing it with $vanilla_resolved_name"
361 echo "$vanilla_resolved_name" >> $filelist.tmp
362 mv -f $filelist.tmp $filelist
363 fi
364 done
365 done
366 $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367 mv -f $filelist.tmp $filelist
368 echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373 local r res mapfile mappath included_item included_list keyfile mp locale
374 LogAll "INFO: Analyzing your keyboard's configuration."
375 KEYDIR=/usr/lib/kbd
376 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
377 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
378 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
379 [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
380 if [ ! -e "$KEYDIR" ] ; then
381 LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
382 return 0
383 fi
384 if [ -e "/etc/sysconfig/keyboard" ] ; then
385 LogFile "INFO: Red Hat-style config detected."
386 keyfile=/etc/sysconfig/keyboard
387 elif [ -e "/etc/vconsole.conf" ] ; then
388 LogFile "INFO: New Fedora style config detected."
389 keyfile=/etc/vconsole.conf
390 elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391 LogFile "INFO: Slackware-style config detected."
392 keyfile=/etc/rc.d/rc.keymap
393 elif [ -e "/etc/rc.config" ] ; then
394 LogFile "INFO: Debian-style config detected."
395 keyfile=/etc/rc.config
396 elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397 LogFile "INFO: Debian-style config detected."
398 mkdir -p $bigdir/tmp
399 echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
400 KBDEPTH=0
401 mkdir -p $bigdir/etc/console
402 cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403 echo ""
404 echo -e "$DONE"
405 return 0
406 elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407 LogFile "INFO: Ubuntu-style config detected."
408 mkdir -p $bigdir/tmp
409 if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410 kbdfile="/etc/console-setup/boottime.kmap.gz"
411 else
412 kbdfile="/etc/console-setup/cached.kmap.gz"
413 fi
414 echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
415 KBDEPTH=0
416 mkdir -p $bigdir/etc/console-setup
417 cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418 echo ""
419 echo -e "$DONE"
420 return 0
421 elif [ -e "/etc/rc.conf" ] ; then
422 LogFile "INFO: ArchLinux config detected."
423 keyfile=/etc/rc.conf
424 elif [ -e "/etc/conf.d/keymaps" ] ; then
425 LogFile "INFO: Gentoo-style config detected."
426 keyfile=/etc/conf.d/keymaps
427 elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428 LogFile "INFO: X11-style config detected."
429 keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430 else
431 LogFile "Searching for rc.config ..."
432 keyfile=`find /etc -name rc.config | head -n1`
433 if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434 LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435 return
436 else
437 LogFile "INFO: Found $keyfile"
438 fi
439 fi
440 if [ ! -e "$KEYDIR/keymaps" ] ; then
441 LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442 return
443 fi
444 LogFile "INFO: keyfile=$keyfile"
445 # For SLES we need to remove the .map.gz extension Cf #614
446 locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447 [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
448 [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
449 [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
450 LogFile "INFO: locale=$locale"
451 #
452 # Process the keymaps dir once for all
453 # AddKeyboardMappingFile will use it recursively
454 #
455 find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456 mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457 [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458 # If we have multiple keymaps then log it !!
459 echo "$mp" | grep -q " " >> $LOGFILE
460 if [ $? -eq 0 ]; then
461 LogAll "WARNING: Multiple keymaps found: $mp"
462 LogFile "INFO: The following one will be used"
463 fi
464 for i in $mp ; do
465 mappath=$i
466 [ -e "$i" ] && [ ! -d "$i" ] && break
467 done
468 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469 mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470 fi
471 LogFile "INFO: mappath = $mappath"
472 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473 LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474 return
475 fi
476 LogAll "INFO: Adding the following keyboard mapping tables: "
477 mkdir -p $bigdir/tmp
478 echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
479 KBDEPTH=0
480 AddKeyboardMappingFile $mappath
481 echo ""
482 echo -e "$DONE"
483 rm -f $MINDI_TMP/keymaps.find
484 return 0
485}
486
487
488FindLdlinux32Binary() {
489 LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
491 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
492 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
493 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
494 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
495 [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
496 #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
497 if [ ! -e "$LDLINUXC32" ]; then
498 LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
499 LDLINUXC32=/tmp/idoesnthopefullyexist
500 else
501 LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
502 fi
503}
504
505
506FindMboot32Binary() {
507 MBOOTC32=/usr/lib/syslinux/mboot.c32
508 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
513 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
514 [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
515 [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
516 LogFile "INFO: Found mboot.c32 at $MBOOTC32"
517}
518
519FindIsolinuxBinary() {
520 ISOLINUX=/usr/lib/isolinux.bin
521 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
522 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
523 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
524 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
525 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
526 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
527 [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
528 [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529 LogFile "INFO: Found isolinux.bin at $ISOLINUX"
530}
531
532
533GenerateGiantDependencyList() {
534 local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
535
536 echo -en "Analyzing dependency requirements"
537 outfile=$1
538 tempfile=$MINDI_TMP/$$.txt
539 incoming=`ReadLine`
540
541 > $tempfile
542 progress=0
543 res=0
544 noof_lines=$2
545 while [ "$incoming" != "" ] ; do
546 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
547 incoming=`ReadLine`
548 continue
549 fi
550 if [ "$incoming" = "LVMFILES:" ] ; then
551 break
552 fi
553 filelist=`GenerateListForFile "$incoming"`
554 r=$?
555 [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
556 res=$(($res+$r))
557# LogFile "INFO: '$incoming' generates filelist '$filelist'"
558 for fname in $filelist ; do
559 [ "$fname" != "" ] && echo "$fname" >> $tempfile
560 done
561 progress=$(($progress+1))
562 LogProgress $progress $noof_lines
563 incoming=`ReadLine`
564 done
565 if [ "$incoming" = "LVMFILES:" ] ; then
566 incoming=`ReadLine`
567 lvmversion=""
568 while [ "$incoming" != "" ] ; do
569 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
570 incoming=`ReadLine`
571 continue
572 fi
573 filelist=`GenerateListForFile "$incoming"`
574 for tool in $filelist ; do
575 lvmresolved=`readlink -f $tool`
576 if [ "$tool" = "$lvmresolved" ]; then
577 echo "$tool" >> $tempfile
578 elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
579 if [ "$lvmversion" = "" ] ; then
580 lvmversion=`$lvmresolved`
581 echo "$lvmresolved" >> $tempfile
582 fi
583 toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
584 if [ "$lvmversion" = "200" ]; then
585 # pvdata and lvmcreate_initrd don't exist in LVM2
586 case "$toolstripped" in
587 "pvdata")
588 continue
589 ;;
590 "lvmcreate_initrd")
591 continue
592 ;;
593 esac
594 fi
595 toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
596 if [ -e "$toolpath" ] ; then
597 echo "$toolpath" >> $tempfile
598 echo "$tool" >> $tempfile
599 else
600 toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
601 fi
602 if [ -e "$toolpath" ] ; then
603 echo "$toolpath" >> $tempfile
604 echo "$tool" >> $tempfile
605 else
606 echo "Where are your LVM-Tools? Couldn't find $tool"
607 fi
608 else
609 echo "$tool" >> $tempfile
610 fi
611 done
612 progress=$(($progress+1))
613 LogProgress $progress $noof_lines
614 incoming=`ReadLine`
615 done
616 fi
617 echo -en "$DONE\nMaking complete dependency list"
618
619 tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
620 mv -f $tempfile.new $tempfile
621 > $outfile.pre
622 progress=0
623 noof_lines=`cat $tempfile | wc -l`
624 LogFile "---------------------------------"
625 LogFile "List of dependencies: "
626 LogFile "---------------------------------"
627 for fname in `cat $tempfile` ; do
628 echo "$fname" | tee -a $LOGFILE >> $outfile.pre
629 LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
630 progress=$(($progress+1))
631 LogProgress $progress $noof_lines
632 done
633 if [ _"$MONDO_SHARE" != _"" ]; then
634 mkdir -p $bigdir/tmp
635 mkdir -p $bigdir/usr/bin
636 if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
637 LogAll "\nINFO: Incorporating post-nuke tarball"
638 old_pwd=`pwd`
639 cd "$bigdir"
640 tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
641 cd "$old_pwd"
642 fi
643 if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
644 LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
645 else
646 LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
647 LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
648 LogIt " If Mindi was called by Mondo then send me a bug report."
649 LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
650 LogIt " Finally, run Mindi again."
651 Die "Odd."
652 fi
653 cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
654 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
655 LogAll "\nINFO: Incorporating Network-related settings"
656 for r in NETFS-* ; do
657 cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
658 LogFile "INFO: Copying $r to ramdisk"
659 done
660 fi
661 fi
662 tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
663 rm -f $tempfile $outfile.pre
664 [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
665 return $res
666}
667
668
669GenerateListForFile() {
670 local files_found loc fname incoming i res
671 incoming="$1"
672 files_found=""
673 res=0
674
675 for fname in $incoming ; do
676 files_found="$files_found `LocateFile $fname`"
677 done
678
679 echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
680}
681
682
683# Returns all disk devices which are part of a raid array
684GetAllRaidMembers() {
685 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
686}
687
688
689GetFileSizeList() {
690 local i
691 for i in `find $1 -type d -o -print` ; do
692 du -sk $i
693 done
694}
695
696
697# Check kernel filesystem capabilites for accessing initrd image
698# Could be ext2 FS (old mode) or initramfs (new mode)
699#
700# Interface definition:
701# param #1: absolute path to kernel image
702GetInitrdFilesystemToUse() {
703
704 # interface test: make sure we have one parameter
705 if [ $# -ne 1 ]; then
706 Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
707 fi
708
709 # interface parameters
710 local lvKernelImage=$1
711
712 # local constants (filesystem magic strings)
713 local lcMagicCramfs="<3>cramfs: wrong magic"
714 local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
715 local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
716 local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
717
718 # local variables
719 local lvOffset
720 local lvScanRes
721 local lvUseFilesystem
722
723 # say where we are.
724 LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
725
726 # verify that file exists
727 [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
728
729 # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
730 file $lvKernelImage 2>&1 | grep -q gzip
731 if [ $? -eq 0 ]; then
732 LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
733 lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
734 else
735 LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
736 # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
737 # get offet of gzip magic "1f8b0800" in file (for these older kernels)
738 lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
739 if [ $lvOffset -eq 0 ]; then
740 LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
741 lvScanRes=$lcMagicInitfs
742 else
743 lvOffset=`expr $lvOffset / 2`
744 LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
745 # scan again kernel image
746 lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
747 fi
748 fi
749
750 # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
751 if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
752 lvUseFilesystem="ext2fs"
753 elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
754 lvUseFilesystem="ext3fs"
755 elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
756 lvUseFilesystem="initramfs"
757 elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
758 lvUseFilesystem="cramfs"
759 else
760 # In that case, we are most probably after 2.6.30 and use the supported initramfs
761 LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
762 LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
763 LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
764 lvUseFilesystem="initramfs"
765 fi
766
767 # say what we are using
768 LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
769
770 # return file system to use
771 echo "$lvUseFilesystem"
772
773}
774
775# Searches members of raid device
776# $1: raid device (/dev/md...)
777GetRaidDevMembers() {
778 if [ ! -f /etc/raidtab ]; then
779 return
780 fi
781 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
782}
783
784
785ListAllPartitions() {
786 local res currline partition all_partitions ap_orig remaining i j
787
788 grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
789 [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
790 if [ -e "/vmfs/volumes" ]; then
791 # For VMWare ESX 3 get the device names of these volumes
792 vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
793 fi
794 return
795}
796
797
798ListImagesForUser() {
799 local path fname
800 path=$MINDI_CACHE
801 echo -en "In the directory '$path' you will find the images:-\n"
802 for fname in `ls $path | grep -F mindi-` ; do
803 printf "%19s " $fname
804 done
805 echo " "
806}
807
808
809ListKernelModulePaths() {
810 local module_list module fname r kern
811 module_list="$MODULES"
812 # Remove unwanted modules from list
813 for i in $DENY_MODS; do
814 module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
815 done
816###
817### Sq-Modification ... Use kernelname for module search path if specified
818###
819 if [ "${kernelname}" != "" ]
820 then
821 kern=${kernelname}
822 else
823 kern="$KERVERRUN"
824 fi
825 export KERVER=$kern
826###
827### Sq-Mod End
828###
829 # Get rid of duplicates
830 for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
831 r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
832 if [ -z "$r" ]; then
833 if [ "`echo "$MODULES" | grep -w $module`" ]; then
834 r="[live module file not found]"
835 else
836 r="[extra module file not found]"
837 fi
838 else
839 [ -f "$r" ] && echo "$r"
840 fi
841 LogFile "INFO: module $module --> $r"
842 done
843 find /lib/modules/$kern/modules.* -type f 2> /dev/null
844}
845
846#
847# Critical function which computes all dependencies (dyn. lib.)
848# for a list of binaries
849#
850LocateDeps() {
851 local incoming fname deps
852 incoming="$*"
853 deps=""
854
855 for fname in $incoming ; do
856 if [ ! -e "$fname" ] ; then
857 LogFile "WARNING: $fname does not exist; cannot be LDD'd."
858 if echo $fname | grep lvm &> /dev/null ; then
859 LogFile " This warning only affects you if you are using LVM."
860 if echo "$MODULES" | grep lvm &> /dev/null ; then
861 LogFile " I think you are, so please take heed!"
862 else
863 LogFile " I don't think you are, so don't worry about it."
864 fi
865 fi
866 else
867 deps="$deps $fname"
868 fi
869 done
870 mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
871}
872
873
874LocateFile() {
875 local i j path fname_to_find location output resolved tmp stub cache_id loclist
876 fname_to_find="$1"
877 # It's an absolute path
878 j=`echo "$fname_to_find" | cut -c1`
879 if [ _"$j" = _"/" ]; then
880 dn=`dirname $fname_to_find`
881 # We suppose that the link is already included, just add the new file
882 if [ -h "$dn" ]; then
883 newdn=`readlink -f $dn`
884 bn=`basename $fname_to_find`
885 output="$newdn/$bn"
886 else
887 output="$fname_to_find"
888 fi
889 if [ -h "$output" ] ; then
890 output="`mr-read-all-link $output` $output"
891 fi
892 echo "$output"
893 return 0
894 fi
895 # It's not an absolute path
896 output=""
897 for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
898 #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
899 [ -h "$path" ] && continue
900 [ ! -e "$path/$fname_to_find" ] && continue
901 output="$path/$fname_to_find $output"
902 if [ -h "$path/$fname_to_find" ] ; then
903 output="`mr-read-all-link $path/$fname_to_find` $output"
904 fi
905 done
906 if [ "$output" = "" ] ; then
907 return 1
908 fi
909 echo "$output"
910 return 0
911}
912
913LogProgress() {
914 local i progress modres noof_lines title
915
916 progress=$1
917 noof_lines=$2
918 title=$3
919
920 i=$(($progress*100))
921 if [ $noof_lines -ne 0 ]; then
922 i=$(($i/$noof_lines))
923 else
924 i=0
925 fi
926
927 if [ _"$MONDO_SHARE" != _"" ]; then
928 echo "$title $i%"
929 else
930 echo -en "\r\t\t\t\t\t\t\t\t"
931 echo -en "$i"
932 echo -en "%"
933 modres=$(($progress%4))
934 [ "$modres" -eq "0" ] && echo -en "\t/"
935 [ "$modres" -eq "1" ] && echo -en "\t-"
936 [ "$modres" -eq "2" ] && echo -en "\t\\"
937 [ "$modres" -eq "3" ] && echo -en "\t|"
938 fi
939}
940
941# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
942MakeMondoConfigFile() {
943 local outfile use_lzo use_comp use_star
944 outfile=$1
945 > $outfile
946 [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
947 [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
948 [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
949 [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
950 [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
951 [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
952 use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
953 use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
954 use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
955 use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
956 use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
957 echo "use-lzo $use_lzo" >> $outfile
958 echo "use-gzip $use_gzip" >> $outfile
959 echo "use-star $use_star" >> $outfile
960 echo "use-lzma $use_lzma" >> $outfile
961 echo "use-comp $use_comp" >> $outfile
962 echo "datestamp `date`" >> $outfile
963 [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
964 AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
965 AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
966 AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
967 AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
968 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
969 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
970 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
971 AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
972 AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
973 AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
974 AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
975 AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
976 AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
977
978 # Deal with network configuration in a portable way
979 if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
980 mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
981 fi
982}
983
984# Get PV's for an LV
985GetPVsForLV() {
986 if [ -n "$1" ]; then
987 vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
988 if [ -z "$vg" ]; then
989 return
990 fi
991 $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
992 fi
993}
994
995
996MakeMountlist() {
997 local mountlist all_partitions current_partition \
998partition_size partition_format outstring partition_number \
999partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1000absolute_partition old_partition_fmt current_lvolume uname skip
1001
1002 LogFile "------------------------------------"
1003 LogFile "Your raw fstab file looks like this:"
1004 LogFile "------------------------------------"
1005 cat $MY_FSTAB >> $LOGFILE
1006 LogAll "-----------------------------------"
1007 LogAll "Your mountlist will look like this:"
1008 LogAll "-----------------------------------"
1009
1010# mountlist(OUT)
1011 mountlist=$1
1012
1013# NB: partition = device
1014# NB: mountpt = where the device is mounted
1015
1016 [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1017
1018 [ "$mountlist" != "" ] && rm -Rf $mountlist
1019 > $mountlist
1020 all_partitions=""
1021
1022 if [ $LVM != "false" ]; then
1023 LogAll "INFO: Analyzing LVM..."
1024 $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1025 if [ $? -ne 0 ]; then
1026 LVM="false"
1027 fi
1028 # Excluded LVs and GVs are not reported here
1029 all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1030 fi
1031 all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1032 for i in $IMAGE_DEVS ; do
1033 mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1034 done
1035 [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1036 printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1037 printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
1038 useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1039 for c_p in $all_partitions ; do
1040 # Skip fd/cd devices, network FS, cifs
1041 [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1042 [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1043 if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1044 current_partition=`readlink -f $c_p`
1045 if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1046 current_partition="$c_p"
1047 elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1048 # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1049 current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1050 fi
1051 [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1052 else
1053 current_partition="$c_p"
1054 fi
1055 [ "$c_p" = "none" ] && continue
1056 redhat_label=""
1057 label=""
1058 uuid=""
1059 absolute_partition=`readlink -f $c_p`
1060 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1061
1062 # set default in case we dont't find it
1063 str_to_find_fmt_with=$current_partition
1064
1065 # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1066 # current_partition contains only first column of /etc/fstab
1067 if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1068 redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1069 actual_dev=""
1070
1071 # 1st try, findfs - the RHEL way of finding labels and their partitions
1072 if [ -x "/sbin/findfs" ]; then
1073 actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1074 fi
1075
1076 # 2nd try : blkid, the good way for all LABEL except swap
1077 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1078 actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1079 # For LVM FS it will give a /dev/dm-# which should then be converted
1080 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1081 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1082 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1083 for dev in `ls /dev/mapper/*`; do
1084 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1085 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1086 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1087 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1088 break
1089 fi
1090 done
1091 fi
1092 fi
1093
1094 # 3rd try, which works on a standard partition (ext2/3), but not on swap
1095 # For LVM gives a /dev/mapper entry
1096 if [ "x$actual_dev" = "x" ]; then
1097 actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1098 fi
1099
1100 # 4th try, with vol_id
1101 # SWAP only
1102 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1103 list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1104 for dev_swap in $list_swaps ; do
1105 dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1106 if [ "x$dev_exists" != "x" ]; then
1107 actual_dev=$dev_swap
1108 break;
1109 fi
1110 done
1111 fi
1112
1113 # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1114 # LABEL=SW-cciss/c0d0p3 (RDP)
1115 # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1116 # SWAP only
1117 if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1118 skip=""
1119 uname=$KERVERRUN
1120 [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1121 # 2.6.12 needs 16 (FC3)
1122 [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1123 # 2.6.19 and upper needs 1052
1124 [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1125 [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1126 [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1127 if [ $skip = "" ]; then
1128 Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1129 fi
1130 for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1131 do
1132 # Location of the swap label for kernel 2.6
1133 try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1134 if [ "x$try_dev_label" = "x$redhat_label" ]; then
1135 actual_dev=$try_dev
1136 fi
1137 done
1138 fi
1139
1140 # Check if one of all those tries has known success
1141 if [ "x$actual_dev" != "x" ]; then
1142 current_partition=$actual_dev
1143 else
1144 Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1145 fi
1146 # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1147 # current_partition contains only first column of /etc/fstab
1148 elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1149 uuid=`echo "$current_partition" | cut -d'=' -f2`
1150 actual_dev=""
1151
1152 # 1st try, findfs - the RHEL way of finding labels and their partitions
1153 if [ -x "/sbin/findfs" ]; then
1154 actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1155 fi
1156
1157 # 2nd try : blkid, the good way for all UUID except swap
1158 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1159 actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1160 # For LVM FS it will give a /dev/dm-# which should then be converted
1161 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1162 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1163 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1164 for dev in `ls /dev/mapper/*`; do
1165 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1166 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1167 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1168 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1169 break
1170 fi
1171 done
1172 fi
1173 fi
1174
1175 # 3th try, with vol_id
1176 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1177 list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1178 for dev in $list_dev ; do
1179 dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1180 if [ "x$dev_exists" != "x" ]; then
1181 actual_dev=$dev
1182 break;
1183 fi
1184 done
1185 fi
1186
1187 # 4th try, with dumpuuid (VMWare only ?) for swap
1188 if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1189 list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1190 for dev in $list_dev ; do
1191 dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1192 if [ "x$dev_exists" != "x" ]; then
1193 actual_dev=$dev
1194 break;
1195 fi
1196 done
1197 fi
1198
1199 # Check if one of all those tries has known success
1200 if [ "x$actual_dev" != "x" ]; then
1201 current_partition=$actual_dev
1202 else
1203 Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1204 fi
1205 else
1206 # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1207 # they use symlinks in fstab unrelated to what is shown in mount !
1208 if [ _"$partition_mountpt" = _"" ]; then
1209 # set default in case we dont't find it
1210 for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1211 if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1212 str_to_find_fmt_with=$tmpp
1213 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1214 break;
1215 fi
1216 done
1217 fi
1218 fi
1219
1220 # Detects noauto partitions not mounted and exclude them
1221 partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1222 if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
1223 LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1224 continue
1225 fi
1226 # Detects bind partitions and exclude them
1227 if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1228 LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1229 continue
1230 fi
1231
1232 # Look for devices which have to be excluded
1233 skip=0
1234 if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1235 l=""
1236 list_of_devices="`mr-read-all-link $current_partition`"
1237 for d in $list_of_devices; do
1238 l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1239 done
1240
1241 # Remove PVs from LVs excluded
1242 l="$l `GetPVsForLV $current_partition`"
1243
1244 # We want a single unique list
1245 list_of_devices="`echo $l | sort -u`"
1246
1247 for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1248 if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1249 LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1250 skip=1
1251 continue
1252 fi
1253 done
1254 fi
1255 if [ $skip -eq 1 ]; then
1256 continue
1257 fi
1258
1259 partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1260 # Detects iso9660 ISO images and exclude them
1261 if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1262 LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1263 continue
1264 fi
1265 # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1266 # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1267 # the former is then a link to the latter, so we test whether
1268 # $current_partition is actually such a link or not and set
1269 # $current_lvolume accordingly. On Debian you may find more than one answer
1270 # so we remove the one corresponding to /dev/.static
1271 # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1272 # principle is the same and we need to find the link to it as well.
1273 # Note that $current_lvolume may well be an
1274 # ordinary device. It is just to make sure that we feed the right value
1275 # into any of the LVM tools if possible.
1276
1277 current_lvolume="$current_partition"
1278 if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1279 # .static dir are a Debian specificity
1280 current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1281 echo $current_lvolume | grep -q ' '
1282 if [ $? -eq 0 ]; then
1283 LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1284 fi
1285 # if it's not found, it may well be a real device such as a multipath one
1286 # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1287 if [ _"$current_lvolume" = _"" ]; then
1288 current_lvolume="$current_partition"
1289 fi
1290 fi
1291 #
1292 # End of LVM device style variation code (other than $current_lvolume).
1293
1294 if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1295 # Size computed via LVM not directly
1296 partition_size="lvm"
1297 else
1298 [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1299 [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1300 if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1301 # Skip swap files
1302 [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1303 partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1304 [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1305 [ "$partition_format" != "swap" ] && partition_format="swap"
1306 if [ "$partition_size" = "" ] ; then
1307 totalsize=0
1308 items=0
1309 for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1310 totalsize=$(($totalsize+$i))
1311 items=$(($items+1))
1312 done
1313 [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1314 [ "$partition_size" -lt "125000" ] && partition_size=125000
1315 LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1316 fi
1317 else
1318 partition_size=`SizeOfPartition $current_partition`
1319 fi
1320 fi
1321 [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1322 [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1323 if [ "$partition_mountpt" = "" ] ; then
1324 if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1325 if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1326 partition_mountpt="raid"
1327 partition_format="raid"
1328 else
1329 partition_mountpt="lvm"
1330 partition_format="lvm"
1331 fi
1332 fi
1333 fi
1334 psz=$partition_size
1335 LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1336 [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1337 if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1338 partition_mountpt="image"
1339 old_partition_fmt=$partition_format
1340 partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1341 partition_size=$(($partition_size+1)); # just in case
1342 if [ "$partition_format" = "Linux" ] ; then
1343 LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1344 LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1345 partition_format=$old_partition_fmt
1346 fi
1347 fi
1348
1349 if [ ! "$partition_mountpt" ] ; then
1350 LogFile "------- $FDISK -l $qq log ------------"
1351 for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1352 partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1353 [ "$partition_format" ] && break
1354 done
1355 LogFile "------- $FDISK log end ------------"
1356 if [ "$partition_format" = "Compaq diagnostics" ] ; then
1357 partition_format="compaq"
1358 elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1359 LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1360 continue
1361 fi
1362 fi
1363 if [ "$redhat_label" ]; then
1364 label="$redhat_label"
1365 elif [ "$uuid" ]; then
1366 label="$uuid"
1367 fi
1368
1369 # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1370 # in order to mount the root part e.g. in grub.
1371 # One way to solve this is to add the UUID now, if there wasn't one so it's
1372 # restored correctly
1373 if [ _"$label" = _"" ]; then
1374 label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1375 fi
1376
1377 partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1378 [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1379 unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1380 if [ "$current_partition" = "" ] ; then
1381 LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1382 elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1383 if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1384 partition_mountpt=raid
1385 partition_format=raid
1386 printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1387 printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1388 else
1389 LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1390 fi
1391 elif [ "$partition_format" = "" ] ; then
1392 LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1393 elif [ "$partition_size" = "" ] ; then
1394 LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1395 elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1396 continue
1397 else
1398 if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1399 LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1400 partition_format="vfat"
1401 fi
1402 printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1403 printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1404 fi
1405 done
1406 LogAll "-----------------------------------"
1407}
1408
1409CheckMountlist() {
1410 local file=$1
1411 # Coherency verification
1412 ML01=`cat $file | wc -l`
1413 ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1414 ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1415 ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1416 if [ "$ML01" -ne "$ML1" ]; then
1417 LogFile "--------------------------------------------"
1418 LogAll "WARNING: Duplicate device entry in mountlist"
1419 LogFile "--------------------------------------------"
1420 fi
1421 if [ "$ML02" -ne "$ML2" ]; then
1422 LogFile "--------------------------------------------"
1423 LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1424 LogFile "------------------------------------------------"
1425 fi
1426}
1427
1428OfferToMakeBootableISO() {
1429 local i old_pwd
1430 if [ -z "$ISO_CMD" ]; then
1431 LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1432 return
1433 fi
1434 if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1435 echo -en "Shall I make a bootable CD image? (y/[n]) "
1436 read i
1437 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1438 fi
1439 rm -Rf $MINDI_TMP/iso
1440 mkdir -p $MINDI_TMP/iso/{images,archives}
1441 LogFile "INFO: mindi_lib = $MINDI_LIB"
1442 cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1443 for i in memdisk memtest.bin memtest.img ; do
1444 j=$MINDI_LIB/$i
1445 k=$MINDI_TMP/iso
1446 if [ -e "$j" ] ; then
1447 LogAll "INFO: Copying $j to $k"
1448 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1449 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1450 if [ _"$MONDO_SHARE" != _"" ]; then
1451 cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1452 fi
1453 fi
1454 done
1455 MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1456 if [ $KERNEL_IS_XEN = "yes" ]; then
1457 FindMboot32Binary
1458 cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1459 cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1460 fi
1461 # Useful for syslinux 5.x
1462 FindLdlinux32Binary
1463 if [ -e $LDLINUXC32 ]; then
1464 cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1465 fi
1466 cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1467 cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1468
1469 if [ _"$MONDO_SHARE" != _"" ]; then
1470 if [ $KERNEL_IS_XEN = "yes" ]; then
1471 cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1472 cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1473 fi
1474 if [ -e $LDLINUXC32 ]; then
1475 cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1476 fi
1477 cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1478 cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1479 fi
1480 MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1481 if [ "$ARCH" != "ia64" ] ; then
1482 cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1483 fi
1484 old_pwd=`pwd`
1485 cd "$MINDI_TMP/iso"
1486 if [ "$ARCH" != "ia64" ] ; then
1487 if [ _"$MONDO_SHARE" != _"" ]; then
1488 cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1489 if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1490 cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1491 fi
1492 if [ $KERNEL_IS_XEN = "yes" ]; then
1493 cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1494 fi
1495 cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1496 fi
1497 $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1498 else
1499 $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1500 fi
1501 if [ "$?" -ne "0" ] ; then
1502 LogFile "----------- $ISO_CMD's errors --------------"
1503 LogAll "$ISO_CMD returned the following errors:"
1504 cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1505 LogAll "ERROR: Failed to create ISO image."
1506 else
1507 LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1508 fi
1509 rm -f $MINDI_TMP/mkisofs.log
1510 cd "$old_pwd"
1511}
1512
1513
1514OfferToMakeBootableUSB() {
1515 local i
1516 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1517 echo -n "Shall I make a bootable USB device ? (y/[n]) "
1518 read i
1519 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1520 if [ "$USBDEVICE" = "" ]; then
1521 echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1522 read dev
1523 USBDEVICE=$dev
1524 fi
1525 echo "WARNING: This will erase all content on $USBDEVICE"
1526 echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1527 read i
1528 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1529 fi
1530 rm -Rf $MINDI_TMP/usb
1531 mkdir -p $MINDI_TMP/usb
1532 USBPART="${USBDEVICE}1"
1533
1534 echo -en "Transforming $USBDEVICE in a Bootable device "
1535 echo -en "."
1536 LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1537 LogFile "INFO: Checking $USBDEVICE"
1538 $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1539 if [ $? -ne 0 ]; then
1540 LogAll "ERROR: Unable to access $USBDEVICE"
1541 LogAll " Make sure your USB device is plugged in"
1542 MindiExit -1
1543 fi
1544 echo -en "."
1545 # Some distro do auto mount at that point (Ubuntu)
1546 LogFile "INFO: Unmounting $USBPART just in case"
1547 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1548 # If your key has no MBR it may cause an issue
1549 # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1550 if [ -r $MBRFILE ]; then
1551 LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1552 dd if=$MBRFILE of=$USBDEVICE
1553 else
1554 LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1555 LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1556 fi
1557 LogFile "INFO: Preparing $USBDEVICE"
1558 cat > $MINDI_TMP/fdisk.txt << EOF
1559d
1560d
1561d
1562d
1563n
1564p
15651
1566
1567
1568t
1569b
1570a
15711
1572w
1573EOF
1574 $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1575 if [ $? -ne 0 ]; then
1576 LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1577 LogAll " Make sure your USB device is plugged in"
1578 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1579 MindiExit -1
1580 fi
1581 LogFile "fdisk build file"
1582 LogFile "----------------"
1583 cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1584 LogFile "----------------"
1585 rm -f $MINDI_TMP/fdisk.txt
1586 LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1587 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1588 echo -en "."
1589 # Calling kpartx in case devices were not created
1590 if [ -x "/sbin/kpartx" ]; then
1591 /sbin/kpartx -a $USBDEVICE
1592 fi
1593 # Some distro do auto mount at that point (Ubuntu)
1594 LogFile "INFO: Unmounting $USBPART just in case again"
1595 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1596 echo -en "."
1597 # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1598 if [ "`which dmsetup`" != "" ]; then
1599 block_id="`echo $USBPART | sed 's|/dev/||g'`"
1600 if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1601 LogFile "INFO: Removing $block_id from device mapper."
1602 sleep 1
1603 dmsetup remove $block_id
1604 fi
1605 fi
1606 echo -en "."
1607 LogFile "INFO: Creating a vfat filesystem on $USBPART"
1608 mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1609 if [ $? -ne 0 ]; then
1610 LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1611 LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1612 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1613 MindiExit -1
1614 fi
1615 echo -en "."
1616 LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1617 mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1618 if [ $? -ne 0 ]; then
1619 LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1620 LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1621 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1622 MindiExit -1
1623 fi
1624 echo -en "."
1625 mkdir -p $MINDI_TMP/usb/images
1626 cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1627 echo -en "."
1628 LogFile "INFO: mindi_lib = $MINDI_LIB"
1629 for i in memdisk memtest.bin memtest.img ; do
1630 j=$MINDI_LIB/$i
1631 k=$MINDI_TMP/usb
1632 if [ -e "$j" ] ; then
1633 LogIt "INFO: Copying $j to $k"
1634 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1635 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1636 fi
1637 done
1638 echo -en "."
1639 MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1640 echo -en "."
1641 cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1642 echo -en "."
1643 cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1644 echo -en "."
1645 MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1646 echo -en "."
1647 LogAll "----------- syslinux's conf --------------"
1648 cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1649 LogAll "------------------------------------------"
1650 umount $MINDI_TMP/usb
1651 if [ "$ARCH" != "ia64" ] ; then
1652 syslinux -v 2>&1 | grep -q 4.02
1653 if [ $? -eq 0 ]; then
1654 # This buggy version of syslinux requires a call to --stupid and not -s
1655 syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1656 res=$?
1657 else
1658 syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1659 res=$?
1660 fi
1661 if [ $res -ne 0 ] ; then
1662 LogAll "----------- syslinux's errors --------------"
1663 cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1664 LogAll "------------------------------------------"
1665 LogIt "ERROR: Failed to create USB image."
1666 else
1667 echo -e "$DONE"
1668 LogFile "INFO: Created bootable USB image on $USBDEVICE"
1669 fi
1670 rm -f $MINDI_TMP/syslinux.log
1671 else
1672 LogAll "ERROR: No USB boot support for ia64"
1673 MindiExit -1
1674 fi
1675}
1676
1677
1678MakeMessageFile() {
1679
1680 if [ -x "/bin/lsb_release" ]; then
1681 DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1682 elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1683 DESC="Arch Linux"
1684 if [ -r /var/log/pacman.log ]; then
1685 # there are no releases but we can get the last system upgrade
1686 # Output example: Arch Linux [2011-03-03 01:39]
1687 DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1688 fi
1689 elif [ -r /etc/issue.net ]; then
1690 DESC=`head -1 /etc/issue.net`
1691 elif [ -r /etc/issue ]; then
1692 DESC=`head -1 /etc/issue`
1693 elif [ -x "/usr/bin/pbdistrocheck" ]; then
1694 # For pb >= 0.9.8
1695 DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1696 else
1697 DESC="Unknown desc"
1698 fi
1699 sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1700 if [ _"$MONDO_SHARE" != _"" ]; then
1701 if [ "$CDRECOVERY" != "yes" ] ; then
1702 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1703 echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1704 echo -en "$BOOT_MEDIA_MESSAGE"
1705 elif [ ! "$MINDI_TMP" ] ; then
1706 echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1707 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1708 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1709 fi
1710 else
1711 echo -en "$BOOT_MEDIA_MESSAGE"
1712 fi
1713 else
1714 echo -en "\
1715To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1716CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1717 fi
1718 fi
1719
1720 # Also create the other help screens
1721 head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1722 head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1723 head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1724}
1725
1726
1727MakeBootConfFile() {
1728 local options i ooo
1729 options=""
1730 # Type of boot file (elilo or syslinux/isolinux)
1731 type=$1
1732 if [ "$type" = "elilo" ]; then
1733 sep="="
1734 else
1735 sep=" "
1736 fi
1737
1738 # Generic header for conf file
1739 if [ "$type" != "elilo" ] ; then
1740 echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1741 else
1742 echo -en "prompt\n"
1743 fi
1744
1745 # Compute which default option to boot from
1746 if [ "$CDRECOVERY" = "yes" ] ; then
1747 echo -en "default${sep}RESTORE\n"
1748 # In case it's mondoarchive
1749 elif [ _"$MONDO_SHARE" != _"" ]; then
1750 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1751 echo -en "default${sep}iso\n"
1752 else
1753 echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1754 fi
1755 else
1756 echo -en "default${sep}expert\n"
1757 fi
1758
1759 # Handle timeout
1760 if [ "$CDRECOVERY" != "yes" ] ; then
1761 echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1762 else
1763 echo -en "timeout${sep}10000\n"
1764 fi
1765 echo -en "\n"
1766
1767 # prepare which labels will be generated
1768 if [ "$CDRECOVERY" = "yes" ] ; then
1769 options="RESTORE expert"
1770 else
1771 if [ _"$MONDO_SHARE" != _"" ]; then
1772 options="interactive expert compare iso nuke isonuke"
1773 else
1774 options="expert"
1775 fi
1776 fi
1777
1778 # Generate rest of conf file
1779 for i in $options ; do
1780 ooo=$i
1781 [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1782 if [ "$type" = "elilo" ]; then
1783 outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1784 else
1785 ps="/"
1786 if [ "$type" = "syslinux" ]; then
1787 ps=""
1788 fi
1789 if [ $KERNEL_IS_XEN = "no" ]; then
1790 outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1791 else
1792 outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1793 fi
1794 fi
1795 echo -en "$outstr"
1796 done
1797 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1798 if [ "$type" = "elilo" ]; then
1799 echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1800 echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1801 else
1802 ps="/"
1803 if [ "$type" = "syslinux" ]; then
1804 ps=""
1805 fi
1806 echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1807 echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1808 fi
1809 fi
1810}
1811
1812
1813PrepareBootDiskImage_LILO() {
1814 local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1815 imagesdir=$MINDI_CACHE
1816 kernelpath=$1
1817
1818 retval=0
1819
1820 old_pwd=`pwd`
1821 [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1822 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1823 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1824 echo -en "..."
1825 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1826 mkdir -p $mountpoint
1827 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1828 LogFile "Creating vfat filesystem on $imagefile"
1829 mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1830 mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1831
1832 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1833 mkdir -p $mountpoint/etc
1834 liloconf=$mountpoint/elilo.conf
1835
1836 MakeBootConfFile elilo > $liloconf
1837
1838 # Copy it so that CD-ROM menu entry is satisfied
1839 mountefi=0
1840 df -T | grep /boot/efi | grep -q vfat
1841 if [ $? -ne 0 ]; then
1842 mount /boot/efi
1843 if [ $? -ne 0 ]; then
1844 echo "You have to mount your EFI partition when using mindi"
1845 MindiExit -1
1846 fi
1847 mountefi=1
1848 fi
1849 el=`find /boot/efi -name elilo.efi`
1850 cp $el $mountpoint
1851 cp $liloconf $mountpoint
1852 if [ $mountefi -eq 1 ]; then
1853 umount /boot/efi 2>&1 > /dev/null
1854 fi
1855
1856 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1857 cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1858 if [ "$?" -ne "0" ] ; then
1859 LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1860 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1861 LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1862 rm -f $MINDI_TMP/mtpt.$$
1863 LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1864 retval=$(($retval+1))
1865 fi
1866 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1867
1868 mkdir -p $mountpoint/tmp
1869 if [ -f "$MINDI_TMP/$MRCFG" ]; then
1870 cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1871 fi
1872
1873 # copy the kernel across
1874 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1875 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1876 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1877 cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1878 if [ "$?" -ne "0" ] ; then
1879 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1880 du -sk $mountpoint/* >> $LOGFILE
1881 LogFile "--- end of list of files ---"
1882 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1883 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1884 cd "$old_pwd"
1885 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1886 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1887 # losetup /dev/loop0 -d
1888 [ "$imagefile" != "" ] && rm -f $imagefile
1889 LogIt "ERROR: Sorry, your kernel is too big for your image"
1890 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1891 return 0
1892 fi
1893 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1894 LogFile "INFO: Free space left on image = $free_space KB"
1895 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1896 # make it bootable
1897 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1898 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1899 if [ "$KERN_DISK_MADE" ] ; then
1900 LogFile "INFO: Not running LILO. It's not that kind of disk."
1901 fi
1902
1903 cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1904 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1905 echo -en "..."
1906 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1907 if [ "$retval" -eq "0" ] ; then
1908 echo -en "...$DONE\n"
1909 if [ "$KERN_DISK_MADE" ] ; then
1910 LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1911 fi
1912 else
1913 echo -en "...failed\n"
1914 LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1915 [ "$imagefile" != "" ] && rm -f $imagefile
1916 fi
1917 [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1918 return $retval
1919}
1920
1921
1922PrepareBootDiskImage_ISOLINUX() {
1923 local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1924 imagesdir=$MINDI_CACHE
1925 kernelpath=$1
1926 do_boot_root_thingy=""
1927 retval=0
1928
1929 old_pwd=`pwd`
1930 [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1931 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1932 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1933 echo -en "..."
1934 imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1935 mkdir -p $mountpoint
1936 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1937 LogFile "INFO: Creating vfat filesystem on $imagefile"
1938 mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1939 # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1940 syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1941
1942 # Only move it now to its final destination and use it now
1943 mv $imagefile $imagesdir
1944 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1945
1946 mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1947
1948 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1949 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1950 MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1951 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1952 cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1953 if [ "$?" -ne "0" ] ; then
1954 LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1955 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1956 LogAll " Please unload some of your modules and try again."
1957 rm -f $MINDI_TMP/mtpt.$$
1958 LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1959 LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1960 retval=$(($retval+1))
1961 fi
1962
1963 mkdir -p $mountpoint/tmp
1964 if [ -f "$MINDI_TMP/$MRCFG" ]; then
1965 cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1966 fi
1967
1968 # copy the kernel across
1969 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1970 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1971 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1972
1973 retval=0
1974 cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1975 retval=$?
1976 if [ $KERNEL_IS_XEN = "yes" ]; then
1977 cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1978 let retval+=$?
1979 fi
1980
1981 if [ "$retval" -ne "0" ] ; then
1982 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1983 du -sk $mountpoint/* >> $LOGFILE
1984 LogFile "--- end of list of files ---"
1985 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1986 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1987 cd "$old_pwd"
1988 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1989 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1990
1991 LogIt "ERROR: Sorry, your kernel is too big for your image"
1992 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1993 fi
1994 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1995 LogFile "INFO: Free space left on image = $free_space KB"
1996 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1997
1998 # make it bootable
1999 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2000 mkdir -p $mountpoint/etc
2001 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2002 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2003 echo -en "..."
2004 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2005
2006 if [ "$retval" -eq "0" ] ; then
2007 echo -en "...$DONE\n"
2008 if [ "$KERN_DISK_MADE" ] ; then
2009 [ "$imagefile" != "" ] && rm -f $imagefile
2010 LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2011 fi
2012 else
2013 echo -en "...failed\n"
2014 LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2015 [ "$imagefile" != "" ] && rm -f $imagefile
2016 fi
2017 [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2018 return $retval
2019}
2020
2021
2022ParseModprobeForIncludes() {
2023local MODPROBE_CONF mpincfile includes include
2024
2025MODPROBE_CONF=/etc/modprobe.conf
2026mpincfile=$1
2027touch $mpincfile
2028if [ -a $MODPROBE_CONF ]; then
2029 includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2030 if [ -n "$includes" ]; then
2031 for include in $includes
2032 do
2033 if [ -a "$include" ]; then
2034 echo $include >> $mpincfile
2035 fi
2036 done
2037 fi
2038fi
2039}
2040
2041
2042PrepareDataDiskImages() {
2043 local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2044
2045 imagesdir=$MINDI_CACHE
2046 rm -f $imagesdir/mindi.iso
2047 needlist=$MINDI_TMP/what-we-need.txt
2048 bigdir=$MINDI_TMP/bigdir
2049 mkdir -p $bigdir/usr/bin
2050 mkdir -p $bigdir/usr/sbin
2051 includefile=$MINDI_TMP/$$.includefile.txt
2052
2053 lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2054 if [ -e "$DEPLIST_FILE" ]; then
2055 lfiles="$DEPLIST_FILE $lfiles"
2056 fi
2057 lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2058 ParseModprobeForIncludes $includefile
2059 lines=$(($lines+`cat $includefile | wc -l`))
2060 cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2061 res=$?
2062 rm -f $includefile
2063 ListKernelModulePaths >> $needlist
2064 if [ "$res" -ne "0" ] ; then
2065 Die "You have $res files present in dependency list\nbut absent from filesystem."
2066 fi
2067 mkdir -p $bigdir/tmp
2068 if [ _"$MONDO_SHARE" != _"" ]; then
2069 # BCO: no reason to have the cfg file stored twice
2070 MakeMondoConfigFile $MINDI_TMP/$MRCFG
2071 cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2072 fi
2073
2074 # Needs to be done after the MRCFG creation
2075 FindAndAddUserKeyboardMappingFile
2076
2077 [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2078 DropOptimizedLibraries $needlist $bigdir
2079 echo -en "Assembling dependency files"
2080
2081 CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2082
2083 # also copy io.sys and msdos.sys, if we can find them
2084 for i in `mount | cut -d' ' -f3` ; do
2085 for j in io.sys msdos.sys ; do
2086 [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2087 done
2088 done
2089
2090 # master boot record, too
2091 i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2092 if [ "$i" ] ; then
2093 LogAll "INFO: Backing up $i's MBR"
2094 dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2095 sleep 1
2096 sync
2097 j=$i
2098 [ -h "$j" ] && j=`readlink -f $j`
2099 LogAll "INFO: Creating /dev/boot_device ($j)"
2100 mkdir -p $bigdir/dev
2101 cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2102 fi
2103
2104 old_pwd=`pwd`
2105 cd "$bigdir"
2106
2107 # Get terminfo content
2108 ti="usr/share/terminfo/l"
2109 if [ -d /$ti ]; then
2110 mkdir -p $ti
2111 cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2112 fi
2113 if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2114 cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2115 [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2116 fi
2117 if [ -d "/lib/dev-state" ]; then
2118 cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2119 fi
2120 cd "$old_pwd"
2121 echo -e "$DONE"
2122 TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2123 MakeMountlist $MINDI_TMP/mountlist.txt
2124 CheckMountlist $MINDI_TMP/mountlist.txt
2125 mkdir -p $bigdir/tmp
2126 cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2127 if [ _"$MONDO_SHARE" != _"" ]; then
2128 cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2129 fi
2130 if [ $LVM != "false" ]; then
2131 $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2132 if [ "$?" -ne "0" ]; then
2133 LVM="false"
2134 rm -f $bigdir/tmp/i-want-my-lvm
2135 else
2136 LogFile "Your i-want-my-lvm file content is:"
2137 LogFile "-----------------------------------"
2138 cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2139 LogFile "-----------------------------------"
2140 fi
2141 fi
2142 LogFile "Your mountlist.txt file content is:"
2143 LogFile "-----------------------------------"
2144 cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2145 LogFile "-----------------------------------"
2146
2147 echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2148 echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2149 if [ _"$MONDO_SHARE" != _"" ]; then
2150 for q in filelist.full.gz biggielist.txt ; do
2151 [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2152 cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2153 done
2154 fi
2155
2156 echo -en "Tarring and zipping the data content..."
2157 size_of_all_tools=`du -sk $bigdir | cut -f1`
2158 (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2159 LogFile "Size of the data content"
2160 LogFile "------------------------"
2161 du -sk $imagesdir/*gz >> $LOGFILE
2162 LogFile "------------------------"
2163 echo -e "$DONE"
2164
2165 FRIENDLY_OUTSTRING="Boot and data disk images were created."
2166 rm -rf $bigdir
2167 rm -f $needlist
2168}
2169
2170
2171Prompt() {
2172 echo -en "$1"
2173 read line
2174}
2175
2176
2177ReadLine() {
2178 local i incoming
2179 read incoming
2180 i=0
2181 while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2182 i=$(($i+1))
2183 read incoming
2184 done
2185 echo "$incoming"
2186}
2187
2188
2189SizeOfPartition() {
2190 local devpath drive res stub
2191 device=$1
2192 if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2193 Die "Cannot find $device's size - is your /etc/fstab sane?"
2194 fi
2195 if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2196 res=`SizeOfRaidPartition $device`
2197 [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2198 echo "$res"
2199 return 0
2200 fi
2201 # patch from Bill <bill@iwizard.biz> - 2003/08/25
2202 res=`$FDISK -s $device 2>> $LOGFILE`
2203 # end patch
2204 # take only the first in case of multiple mount (cifs, nfs, ...)
2205 [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2206 [ "$res" = "" ] && res="-1"
2207 echo $res
2208 return 0
2209}
2210
2211
2212SizeOfRaidPartition() {
2213 local real_dev smallest_size silly tmp
2214
2215 silly=999999999
2216 smallest_size=$silly
2217
2218 for real_dev in `GetRaidDevMembers $1` ; do
2219 tmp=`SizeOfPartition $real_dev`
2220 [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2221 done
2222
2223 if [ "$smallest_size" = "$silly" ] ; then
2224 echo "-1"
2225 return 1
2226 else
2227 echo "$smallest_size"
2228 return 0
2229 fi
2230}
2231
2232
2233StripExecutable()
2234{
2235 local tmpfile
2236
2237 tmpfile=$MINDI_TMP/stripped.$$.dat
2238 [ -d "$1" ] || [ -h "$1" ] && return
2239 cp -f $1 $tmpfile 2>> $LOGFILE
2240 strip $tmpfile 2> /dev/null
2241 if [ "$?" -eq "0" ] ; then
2242 cp -f $tmpfile $1 2>> $LOGFILE
2243 LogFile "INFO: Stripped binary $2"
2244 fi
2245 rm -f $tmpfile
2246}
2247
2248KernelVer() {
2249 local fkern_ver fname
2250
2251 fname=$1
2252 file $fname | grep -q gzip
2253 if [ "$?" -eq "0" ] ; then
2254 # Used by ia64
2255 fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2256 else
2257 fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2258 fi
2259 echo "$fkern_ver"
2260}
2261
2262
2263# WARNING: This function should just echo the final result !!!
2264#
2265TryToFindKernelPath() {
2266 local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2267
2268 we_want_version=$KERVERRUN
2269 possible_kernels=""
2270 duff_kernels=""
2271 output=""
2272
2273 if [ "$ARCH" = "ia64" ] ; then
2274 root="/boot/efi/efi"
2275 else
2276 root="/"
2277 fi
2278 # See if we're booted from a Xen kernel
2279 # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2280 if [ -f /proc/xen/capabilities ]; then
2281 # It's a Xen kernel
2282 KERNEL_IS_XEN="yes"
2283 LogFile "INFO: It's a Xen kernel..."
2284 fi
2285
2286 for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2287 [ ! -e "$fname" ] && continue
2288 [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2289 fkern_ver=`KernelVer $fname`
2290 [ "$fkern_ver" = "" ] && continue
2291 [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2292 [ -f "$fname" ] || continue
2293 [ -h "$fname" ] && continue
2294 kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2295 file $fname | grep -q gzip
2296 if [ "$?" -eq "0" ] ; then
2297 # Used by ia64
2298 if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2299 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2300 duff_kernels="$fname $duff_kernels"
2301 else
2302 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2303 possible_kernels="$fname $possible_kernels"
2304 fi
2305 else
2306 if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2307 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2308 duff_kernels="$fname $duff_kernels"
2309 else
2310 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2311 possible_kernels="$fname $possible_kernels"
2312 fi
2313 fi
2314 done
2315 if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2316 possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2317 fi
2318 if [ ! "$possible_kernels" ] ; then
2319 LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2320 possible_kernels="$duff_kernels"
2321 if [ ! "$possible_kernels" ] ; then
2322 LogAll "INFO: Sorry, no duff kernels either"
2323 else
2324 LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2325 LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2326 fi
2327 fi
2328 if [ $KERNEL_IS_XEN = "yes" ]; then
2329 possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2330 noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2331 fi
2332 possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2333 noof_kernels=`CountItemsIn "$possible_kernels"`
2334 if [ "$noof_kernels" -eq "0" ] ; then
2335 LogAll "Could not find your kernel."
2336 if [ -e "/boot/vmlinuz" ] ; then
2337 LogAll "INFO: Using /boot/vmlinuz as a last resort."
2338 output=/boot/vmlinuz
2339 else
2340 output=""
2341 fi
2342 elif [ "$noof_kernels" -eq "1" ] ; then
2343 kp=`echo "$possible_kernels" | sed s/' '//`
2344 LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2345 output="$kp"
2346 else
2347 for i in $possible_kernels ; do
2348 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2349 LogAll "INFO: OK, I used my initiative and found that "
2350 LogAll "INFO: $i is probably your kernel. "
2351 output="$i"
2352 break
2353 fi
2354 done
2355 if [ ! -n "$output" ]; then
2356 if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2357 output=/boot/vmlinuz
2358 LogFile "INFO: Schlomo, this one's for you."
2359 else
2360 LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2361 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2362 LogFile "INFO: $possible_kernels"
2363 output=""
2364 fi
2365 fi
2366 fi
2367 if [ $KERNEL_IS_XEN = "yes" ]; then
2368 if [ "$noof_xenkernels" -eq "0" ]; then
2369 xenkernelpath=""
2370 elif [ "$noof_xenkernels" -eq "1" ]; then
2371 xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2372 LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2373 else
2374 for i in $possible_xenkernels ; do
2375 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2376 LogFile "INFO: OK, I used my initiative and found that "
2377 LogFile "INFO: $i is probably your Xen kernel. "
2378 xenkernelpath="$i"
2379 break
2380 fi
2381 done
2382 if [ ! -n "$xenkernelpath" ]; then
2383 new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2384 if [ ! -n "$new_possible_xenkernels" ]; then
2385 xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2386 LogFile "INFO: Using $xenkernelpath"
2387 else
2388 LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2389 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2390 LogFile "INFO: $possible_xenkernels"
2391 output=""
2392 xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2393 LogFile "INFO: Using $xenkernelpath"
2394 fi
2395 fi
2396 fi
2397 if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2398 Die "Cannot find Xen kernel $xenkernelpath, aborting"
2399 fi
2400 fi
2401 LogAll "TryToFindKernelPath found $output"
2402 echo "$output"
2403}
2404
2405
2406TurnTgzIntoRdz() {
2407 local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2408
2409 tgz_dir_fname=$1
2410 rdz_fname=$2
2411 kernelsize=$3
2412 maxsize=$(($BOOT_SIZE-$kernelsize))
2413 maxsize=$(($maxsize*2)); # to allow for compression of 50%
2414 tempfile=$MINDI_TMP/temp.rd
2415 res=0
2416 echo -en "..."
2417 dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2418 echo -en "..."
2419 LogFile "INFO: Creating ext2 filesystem on $tempfile"
2420 mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2421 echo -en "..."
2422 mkdir -p $mountpoint
2423 mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2424 echo -en "..."
2425 old_pwd=`pwd`
2426 cd "$mountpoint"
2427
2428 # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2429 for d in bin sbin lib lib64; do
2430 if [ -h "/$d" ]; then
2431 thelink=`readlink /$d`
2432 mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2433 mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2434 if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2435 rmdir $mountpoint/$d
2436 fi
2437 if [ ! -h $mountpoint/$d ]; then
2438 rm -f $mountpoint/$d 2> /dev/null
2439 (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2440 fi
2441 fi
2442 done
2443 LogFile "INFO: what is now in $mountpoint"
2444 ls -alR $mountpoint >> $LOGFILE
2445
2446 # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2447 for f in $tgz_dir_fname/*; do
2448 if [ ! -r $f ]; then
2449 Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2450 else
2451 cp -Rdf $f . 2>&1 >> $LOGFILE
2452 fi
2453 done
2454 (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2455 ln -sf usr/sbin/init linuxrc
2456
2457 cd dev || Die "Can't cd to dev"
2458 tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2459 rm -f dev-entries.tgz
2460 cd ..
2461
2462 for w in insmod.static insmod.static.old ; do
2463 s=`which $w 2> /dev/null`
2464 if [ -e "$s" ] ; then
2465 tar cf - -C / $s 2> /dev/null | tar xf -
2466 fi
2467 done
2468
2469 [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2470
2471 # Copy of files mandatory for ssh to automate mount if sshfs is used
2472 mkdir $mountpoint/.ssh $mountpoint/tmp
2473 cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2474 cat > $mountpoint/tmp/myssh << EOF
2475ssh -o StrictHostKeyChecking=no $*
2476EOF
2477 chmod 755 $mountpoint/tmp/myssh
2478
2479 # Copy of files mandatory for ld.so
2480 cp -a /etc/ld.so.c* $mountpoint/etc
2481
2482 # Handle the case where busybox and mount are dynamically linked
2483 file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically"
2484 if [ $? -eq 0 ]; then
2485 # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2486 rm -f bin/mount
2487 fi
2488
2489 # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2490 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2491 for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2492 if [ -d $f ]; then
2493 for g in `find $f`; do
2494 echo $g >> $MINDI_TMP/minimal.lis
2495 LocateDeps $g >> $MINDI_TMP/minimal2.lis
2496 done
2497 else
2498 if [ -r $f ]; then
2499 echo $f >> $MINDI_TMP/minimal.lis
2500 LocateDeps $f >> $MINDI_TMP/minimal2.lis
2501 fi
2502 fi
2503 done
2504 for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2505 mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2506 done
2507 # Initial / are trucated by tar
2508 finallist=""
2509 # Remove directories from the list, as tar/cp will create them anyway
2510 # and it may hurt if /lib is in it as on Debian/Ubuntu
2511 # recent bash says that -d is true for a link to a dir !
2512 for f in `sort -u $MINDI_TMP/minimal.lis`; do
2513 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2514 finallist="$finallist $f"
2515 fi
2516 done
2517 #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2518 echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2519 cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2520
2521 # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2522 ln -sf /bin/bash bin/sh
2523 LogIt "INFO: Using bash as default shell"
2524 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2525
2526 # Avoids an issue on some distro (RHEL5)
2527 rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2528
2529 mkdir -p $mountpoint/tmp
2530 # Management of udev (which includes modprobe in rules)
2531 ps auxww | grep -v grep | grep -qw udevd
2532 if [ $? -eq 0 ]; then
2533 echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2534 LogIt "INFO: udev device manager found"
2535 tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2536 # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2537 rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2538 # Do not do it if it's a link (Ubuntu 64 bits #503)
2539 if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2540 tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2541 fi
2542 if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2543 tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2544 fi
2545 if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2546 tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2547 fi
2548 if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
2549 tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2550 fi
2551 if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2552 lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2553 lis=""
2554 # Get only the files which exist in that list
2555 # and potentially their symlink structure
2556 for i in $lis2; do
2557 if [ -h $i ]; then
2558 j=$i
2559 while [ -h $j ]; do
2560 lis="$lis $j"
2561 j=`readlink -f $j`
2562 done
2563 lis="$lis $j"
2564 elif [ -f $i ]; then
2565 lis="$lis $i"
2566 fi
2567 done
2568 # And their deps
2569 LocateDeps $lis > $MINDI_TMP/udev.lis
2570 for i in $lis; do
2571 if [ "`echo $i | cut -c1`" = "/" ]; then
2572 j=`echo $i | cut -c2-`
2573 [ "$j" != "" ] && rm -f $j
2574 fi
2575 echo "$i" >> $MINDI_TMP/udev.lis
2576 done
2577 finallist=""
2578 # Remove directories from the list, as tar/cp will create them anyway
2579 # and it may hurt if /lib is in it as on Debian/Ubuntu
2580 # recent bash says that -d is true for a link to a dir !
2581 for f in `sort -u $MINDI_TMP/udev.lis`; do
2582 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2583 finallist="$finallist $f"
2584 fi
2585 done
2586 #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2587 echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2588 cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2589 rm -f $MINDI_TMP/udev.lis
2590 else
2591 LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2592 LogAll " mindi will use static devices which may cause problems"
2593 rm -f $mountpoint/tmp/USE-UDEV
2594 fi
2595 fi
2596
2597 # Management of potential HW info (ProLiant only at the moment)
2598 rm -rf $MINDI_CACHE/bkphw
2599 mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2600 if [ -d $MINDI_CACHE/bkphw ]; then
2601 LogIt "INFO: Hardware Information found and saved ..."
2602 cp -rp $MINDI_CACHE/bkphw .
2603 if [ -f $MINDI_CACHE/tools.files ]; then
2604 lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2605 LocateDeps $lis > $MINDI_TMP/tools.lis
2606 tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2607 fi
2608 if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2609 mv -f $MINDI_CACHE/mindi-rsthw .
2610 chmod 755 ./mindi-rsthw
2611 fi
2612 rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2613 fi
2614
2615 # Management of perl scripts delivered needed at restore time
2616 mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2617 tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2618
2619 for w in cdrom groovy-stuff ; do
2620 mkdir -p mnt/$w
2621 done
2622
2623 tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2624
2625 echo -en "..."
2626 cd /
2627
2628 needed_modules=""
2629 list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2630
2631 if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2632 # For PXE boot
2633 list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2634 fi
2635 for i in $DENY_MODS; do
2636 LogFile "INFO: Removing $i from the list of modules to load"
2637 list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2638 done
2639
2640 if [ "${kernelname}" != "" ]; then
2641 needed_modules_path=lib/modules/${kernelname}
2642 mkgmopt="-k ${kernelname}"
2643 else
2644 needed_modules_path=lib/modules/$KERVERRUN
2645 mkgmopt="-k $KERVERRUN"
2646 fi
2647
2648 [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
2649 needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2650
2651 LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2652 cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2653
2654 # Uncompress modules if not using udev and native modprobe
2655 if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2656 for i in $needed_modules; do
2657 if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2658 gunzip -f $mountpoint/$i
2659 fi
2660 if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2661 bunzip2 -f $mountpoint/$i
2662 fi
2663 if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2664 unxz -f $mountpoint/$i
2665 fi
2666 LogFile "INFO: Uncompressing $i"
2667 done
2668 fi
2669
2670 # Also copy modules.* in case of udev so that normal modprobe works
2671 tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2672
2673 # Copy FW in case some drivers needs it
2674 for d in "/lib" "/usr/lib"; do
2675 if [ -d "$d/firmware" -a ! -h $d ]; then
2676 cp -a "$d/firmware" "$mountpoint/$d"
2677 fi
2678 done
2679
2680 # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2681 for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2682 if [ -d "$d/multipath" -a ! -h $d ]; then
2683 cp -a "$d/multipath" "$mountpoint/$d"
2684 fi
2685 done
2686
2687 # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2688 (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2689
2690 # Copy an additional ProLiant tool for OBDR support
2691 if [ -f $MINDI_TMP/OBDR ]; then
2692 found=0
2693 if [ -x /usr/bin/hpsa_obdr_mode ]; then
2694 mkdir -p $mountpoint/usr/bin
2695 cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2696 LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2697 found=1
2698 fi
2699 if [ -x /usr/bin/sg_wr_mode ]; then
2700 mkdir -p $mountpoint/usr/bin
2701 lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2702 LocateDeps $lis > $MINDI_TMP/obdr.lis
2703 (cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2704 LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2705 found=1
2706 fi
2707 if [ $found -eq 0 ]; then
2708 LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2709 LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2710 fi
2711 fi
2712
2713 if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2714 LogFile "INFO: Deleting devfsd daemon from ramdisk"
2715 [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2716 rm -f $mountpoint/sbin/devfsd
2717 fi
2718 cd "$old_pwd"
2719 [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2720 if [ _"$MONDO_SHARE" != _"" ]; then
2721 MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2722 cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2723 cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2724 echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2725 echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2726 fi
2727
2728 # Create module list to load at restore time
2729 rm -f $mountpoint/tmp/modules
2730 for m in $CDROM_MODS; do
2731 echo $m >> $mountpoint/tmp/modules
2732 done
2733
2734 mkdir -p $mountpoint/proc
2735 LogFile "---------------------------"
2736 LogFile "Content of initial ramdisk:"
2737 LogFile "---------------------------"
2738 (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2739 LogFile "---------------------------"
2740
2741 # Determine what filesystem to use for initrd image
2742 LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2743 gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2744 [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2745 if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2746 # say what will be used
2747 LogFile "INFO: Creating an $gvFileSystem initrd image..."
2748 # kernel expects linuxrc in ext2 filesystem
2749 ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2750 # unmount loop filesystem and create image file using the standard approach
2751 umount $mountpoint || Die "Cannot unmount $tempfile"
2752 dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2753 if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2754 bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2755 else
2756 bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2757 fi
2758 MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2759 gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2760 rm -f ${rdz_fname}.tmp
2761 # log that we are done
2762 LogFile " ...done."
2763 elif [ "$gvFileSystem" = "initramfs" ]; then
2764 # say what will be used
2765 LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2766 # make sure that cpio is there
2767 which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2768 # go into filesystem
2769 cd "$mountpoint"
2770 # kernel expects init in cpio filesystem
2771 ln -sf usr/sbin/init init
2772 # create cpio image file and unmount loop filesystem
2773 find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2774 cd "$old_pwd"
2775 umount $mountpoint || Die "Cannot unmount $tempfile"
2776 # log that we are done
2777 LogFile " ...done."
2778 else
2779 Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2780 fi
2781
2782 if [ "$res" -eq "0" ] ; then
2783 echo -en "..."
2784 else
2785 echo -en "\rMade an rdz WITH ERRORS. \n"
2786 fi
2787 return 0
2788}
2789
2790
2791##############################################################################
2792#----------------------------------- Main -----------------------------------#
2793##############################################################################
2794
2795# Now we can create what we need
2796mkdir -p $MINDI_TMP
2797
2798# Purge from potential old run
2799if [ _"$MINDI_CACHE" = _"" ]; then
2800 Die "MINDI_CACHE undefined"
2801fi
2802
2803# --nolog needs to be first, and is used in analyze-my-lvm
2804if [ "$1" = "--nolog" ] ; then
2805 shift
2806 LOGFILE=/dev/stderr
2807else
2808 > $LOGFILE
2809fi
2810if [ "$1" = "--printvar" ] ; then
2811 shift
2812 if [ _"$1" != _"" ] ; then
2813 set | grep -Ew "^$1" | cut -d= -f2
2814 fi
2815 exit 0
2816fi
2817
2818LogFile "mindi v$MINDI_VERSION"
2819LogFile "$ARCH architecture detected"
2820LogFile "mindi called with the following arguments:"
2821echo "$@">> $LOGFILE
2822LogFile "Start date : `date`"
2823LogFile "-----------------------------"
2824
2825[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2826
2827# Log some capital variables
2828[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2829[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2830LogFile "MONDO_SHARE = $MONDO_SHARE"
2831LogFile "MINDI_LIB = $MINDI_LIB"
2832LogFile "MINDI_SBIN = $MINDI_SBIN"
2833LogFile "MINDI_CONF = $MINDI_CONF"
2834if [ -f $MINDI_CONFIG ]; then
2835 LogFile "-----------------------------"
2836 LogFile " Mindi configuration file "
2837 LogFile "-----------------------------"
2838 grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2839 LogFile "-----------------------------"
2840fi
2841LogFile "In Mindi"
2842LogFile "--------"
2843LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2844LogFile "BOOT_SIZE = $BOOT_SIZE"
2845LogFile "--------"
2846
2847trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2848
2849# Sanity checks
2850which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2851which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2852which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2853which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2854if which awk &> /dev/null ; then
2855 if ! which gawk &> /dev/null ; then
2856 LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2857 fi
2858fi
2859which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2860[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2861
2862[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2863
2864# Update the PATH variable if incomplete
2865if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2866 PATH=$PATH:/sbin:/usr/sbin
2867 export PATH
2868 LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2869 LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2870 LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2871fi
2872
2873if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2874 Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2875fi
2876
2877### TODO
2878### Fix as it's not mandatory on ia64
2879if [ "$ARCH" = "ia64" ] ; then
2880 if which elilo &> /dev/null ; then
2881 LILO_EXE=elilo
2882 else
2883 LILO_EXE=`which false 2> /dev/null`
2884 fi
2885else
2886 FindIsolinuxBinary
2887fi
2888trap "Aborted" SIGTERM
2889DONE="\r\t\t\t\t\t\t\t\tDone. "
2890kernelpath=""
2891MONDO_ROOT=/var/cache/mondo
2892mkdir -p $MONDO_ROOT
2893
2894if [ -d "/proc/lvm" ]; then
2895 # LVM v1
2896 LVMCMD=""
2897 LVM="v1"
2898elif [ -d "/dev/mapper" ]; then
2899 # LVM v2
2900 LVMCMD="lvm"
2901 LVM="v2"
2902else
2903 LVM="false"
2904fi
2905
2906if [ -e "/proc/cmdline" ]; then
2907 CMDLINE="/proc/cmdline"
2908elif [ -e "/tmp/cmdline" ]; then
2909 CMDLINE="/tmp/cmdline"
2910else
2911 CMDLINE="/dev/null"
2912fi
2913
2914LogFile "INFO: LVM set to $LVM"
2915LogFile "----------"
2916LogFile "mount result:"
2917LogFile "-------------"
2918mount >> $LOGFILE
2919if [ -e /etc/raidtab ]; then
2920 LogFile "-------------"
2921 LogFile "/etc/raidtab content:"
2922 LogFile "-------------"
2923 cat /etc/raidtab >> $LOGFILE
2924else
2925 LogFile "No file /etc/raidtab"
2926fi
2927if [ -e /etc/mdadm.conf ]; then
2928 LogFile "-------------"
2929 LogFile "/etc/mdadm.conf content:"
2930 LogFile "-------------"
2931 cat /etc/mdadm.conf >> $LOGFILE
2932else
2933 LogFile "-------------"
2934 LogFile "No file /etc/mdadm.conf"
2935fi
2936LogFile "-------------"
2937LogFile "cat $CMDLINE"
2938LogFile "-------------"
2939cat $CMDLINE >> $LOGFILE
2940LogFile "-------------"
2941LogFile "cat /proc/swaps:"
2942LogFile "-------------"
2943cat /proc/swaps >> $LOGFILE
2944LogFile "-------------"
2945if [ -e /proc/mdstat ]; then
2946 LogFile "cat /proc/mdstat:"
2947 LogFile "-------------"
2948 cat /proc/mdstat >> $LOGFILE
2949else
2950 LogFile "No pseudo file /proc/mdstat"
2951fi
2952LogFile "-------------"
2953LogFile "cat /proc/partitions:"
2954LogFile "-------------"
2955cat /proc/partitions >> $LOGFILE
2956LogFile "-------------"
2957LogFile "cat /proc/filesystems:"
2958LogFile "-------------"
2959cat /proc/filesystems >> $LOGFILE
2960LogFile "-------------"
2961LogFile "lsmod result:"
2962LogFile "-------------"
2963lsmod >> $LOGFILE
2964MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2965if [ -x /usr/sbin/esxcfg-module ]; then
2966 LogFile "-------------"
2967 LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2968 LogFile "-------------"
2969 LogFile "VMWare modules"
2970 LogFile "-------------"
2971 /usr/sbin/esxcfg-module -l >> $LOGFILE
2972 MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2973fi
2974LogFile "-------------"
2975LogFile "FORCE_MODS:"
2976LogFile "-------------"
2977LogFile "$FORCE_MODS"
2978LogFile "-------------"
2979LogFile "DENY_MODS:"
2980LogFile "-------------"
2981LogFile "$DENY_MODS"
2982LogFile "-------------"
2983LogFile "df result:"
2984LogFile "----------"
2985df -aT >> $LOGFILE
2986LogFile "-------------"
2987LogFile "df -i result:"
2988LogFile "----------"
2989df -i >> $LOGFILE
2990LogFile "-------------"
2991if [ -r /boot/grub/menu.lst ]; then
2992 LogFile "-------------"
2993 LogFile "INFO: /boot/grub/menu.lst content"
2994 LogFile "-------------"
2995 cat /boot/grub/menu.lst >> $LOGFILE
2996 LogFile "-------------"
2997fi
2998if [ -r /boot/grub/grub.conf ]; then
2999 LogFile "-------------"
3000 LogFile "INFO: /boot/grub/grub.conf content"
3001 LogFile "-------------"
3002 cat /boot/grub/grub.conf >> $LOGFILE
3003 LogFile "-------------"
3004fi
3005if [ -r /boot/grub/grub.cfg ]; then
3006 LogFile "-------------"
3007 LogFile "INFO: /boot/grub/grub.cfg content"
3008 LogFile "-------------"
3009 cat /boot/grub/grub.cfg >> $LOGFILE
3010 LogFile "-------------"
3011fi
3012if [ -r /boot/grub/device.map ]; then
3013 LogFile "-------------"
3014 LogFile "INFO: /boot/grub/device.map content"
3015 LogFile "-------------"
3016 cat /boot/grub/device.map >> $LOGFILE
3017 LogFile "-------------"
3018fi
3019if [ -r /etc/lilo.conf ]; then
3020 LogFile "-------------"
3021 LogFile "INFO: /etc/lilo.conf content"
3022 LogFile "-------------"
3023 cat /etc/lilo.conf >> $LOGFILE
3024fi
3025LogFile "Full fdisk info"
3026LogFile "---------------"
3027$FDISK -l >> $LOGFILE
3028LogFile "----------------"
3029
3030# Compute libata version
3031laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
3032# If libata v2 is used then remove ide-generic as it will perturbate boot
3033if [ "`echo $MODULES | grep libata`" ]; then
3034 if [ "$laver" = "2" ]; then
3035 DENY_MODS="$DENY_MODS ide-generic"
3036 LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3037 LogFile "-------------"
3038 fi
3039fi
3040
3041# Check for McAfee which disturbs the access to some files (tgz in articular)
3042if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3043 LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3044 LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3045 LogFile "WARNING: You have two options:"
3046 LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3047 LogFile "WARNING: - Disable the scanner during the backup"
3048fi
3049
3050# Check for ISO_CMD command
3051if [ ! -x $ISO_CMD ]; then
3052 LogFile "NOTE: No CD image (ISO file) utility found"
3053fi
3054
3055FLOPPY_WAS_MOUNTED=""
3056for mtpt in /media/floppy /mnt/floppy /floppy ; do
3057 if mount | grep -w $mtpt &> /dev/null ; then
3058 FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3059 umount $mtpt
3060 fi
3061done
3062
3063#
3064# If we have a USB device we need to store info
3065# and remove it from the parameters line
3066#
3067if [ "$#" -ne "0" ] ; then
3068 if [ "$1" = "--usb" ] ; then
3069 shift
3070 USBDEVICE=$1
3071 if [ _"$USBDEVICE" = _"" ]; then
3072 Die "No USB device specified"
3073 fi
3074 shift
3075 fi
3076fi
3077
3078if [ "$#" -ne "0" ] ; then
3079 if [ "$1" = "--findkernel" ] ; then
3080 resk=`TryToFindKernelPath`
3081 # Avoids logfile content for mondo
3082 export MONDO_SHARE=""
3083 if [ "$resk" = "" ] ; then
3084 if [ $KERNEL_IS_XEN = "yes" ]; then
3085 echo "$xenkernelpath"
3086 LogFile "INFO: xenkernelpath = $xenkernelpath"
3087 MindiExit 0
3088 else
3089 MindiExit -1
3090 fi
3091 else
3092 echo "$resk"
3093 LogFile "INFO: kernelpath = $resk"
3094 MindiExit 0
3095 fi
3096 elif [ "$1" = "--locatedeps" ] ; then
3097 [ ! "$2" ] && Die "Please specify the binary to look at"
3098 LocateDeps $*
3099 # Avoids logfile content for mondo
3100 export MONDO_SHARE=""
3101 MindiExit $?
3102 elif [ "$1" = "--readalllink" ] ; then
3103 [ ! "$2" ] && Die "Please specify the binary to look at"
3104 # Avoids logfile content for mondo
3105 export MONDO_SHARE=""
3106 mr-read-all-link $2
3107 MindiExit $?
3108 elif [ "$1" = "--makemessage" ] ; then
3109 MakeMessageFile | cut -c1-80
3110 MindiExit 0
3111 elif [ "$1" = "--makemountlist" ] ; then
3112 [ ! "$2" ] && Die "Please specify the output file"
3113 MakeMountlist $2
3114 CheckMountlist $2
3115 # Avoids logfile content for mondo
3116 export MONDO_SHARE=""
3117 MindiExit $?
3118 elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3119 echo "Mindi v$MINDI_VERSION"
3120 # Avoids logfile content for mondo
3121 export MONDO_SHARE=""
3122 MindiExit 0
3123 elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3124 MONDO_TMP=$2
3125 # Change MINDI_TMP for the one provided by mondo
3126 # So that it can get back the built files
3127 if [ _"$MONDO_TMP" = _"" ]; then
3128 Die "MONDO_TMP is empty, aborting"
3129 fi
3130 if [ _"$MONDO_TMP" = _"/" ]; then
3131 Die "MONDO_TMP is /, aborting"
3132 fi
3133 mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3134 rmdir $MINDI_TMP
3135 export MINDI_TMP=$MONDO_TMP
3136 mkdir -p $MINDI_TMP
3137
3138 # This is the scratch dir in mondo - subdir images
3139 MINDI_CACHE=$3
3140
3141 kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3142 [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3143
3144###
3145### Sq-Modification...
3146### Attempt to locate kernel specific module path
3147### if module path is found then use it other wise use uname -r to set it...
3148###
3149 if [ $KERNEL_IS_XEN = "yes" ]; then
3150 LogAll "INFO: xenkernelpath = $xenkernelpath"
3151 fi
3152 kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3153 if [ ! -d "/lib/modules/$kernelname" ]; then
3154 LogAll "WARNING: Module path for ${kernelpath} not found..."
3155 LogAll " using running kernel\'s modules."
3156 kernelname=$KERVERRUN
3157 else
3158 LogAll "Using modules for kernel: ${kernelname}"
3159 fi
3160 LogAll "INFO: kernelname = $kernelname"
3161 LogAll "INFO: kernelpath = $kernelpath"
3162###
3163### end of Sq-Modification
3164###
3165 TAPEDEV=$5
3166 TAPESIZE=$6
3167 FILES_IN_FILELIST=$7
3168 USE_LZO=$8
3169 CDRECOVERY=$9
3170 if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3171 IMAGE_DEVS=""
3172 else
3173 IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3174 fi
3175 if [ "${11}" ] ; then
3176 LILO_OPTIONS=""
3177 # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3178 fi
3179 LAST_FILELIST_NUMBER=${12}
3180 ESTIMATED_TOTAL_NOOF_SLICES=${13}
3181 export MINDI_EXCLUDE_DEVS="${14}"
3182 USE_COMP="${15}"
3183 USE_LILO="${16}"
3184 USE_STAR="${17}"
3185 INTERNAL_TAPE_BLOCK_SIZE="${18}"
3186 DIFFERENTIAL="${19}"
3187 USE_GZIP="${20}"
3188 USE_LZMA="${21}"
3189 NOT_BOOT="${22}"
3190 [ "$USE_COMP" = "" ] && USE_COMP=yes
3191 [ "$USE_GZIP" = "" ] && USE_GZIP=no
3192 [ "$USE_LZMA" = "" ] && USE_LZMA=no
3193 [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3194 [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3195 # MONDO_ROOT is the real scratchdir
3196 MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3197 if [ _"$MONDO_ROOT" != _"" ]; then
3198 mkdir -p $MONDO_ROOT
3199 else
3200 Die "MONDO_ROOT is undefined"
3201 fi
3202 else
3203 LogScreen "Syntax: mindi (--custom ....)"
3204 MindiExit -1
3205 fi
3206fi
3207
3208if [ _"$MINDI_CACHE" != _"" ]; then
3209 rm -rf $MINDI_CACHE/* 2> /dev/null
3210 mkdir -p $MINDI_CACHE
3211fi
3212
3213[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3214
3215if [ _"$MONDO_SHARE" = _"" ]; then
3216 LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3217 LogIt "Latest Mindi is available from http://www.mondorescue.org"
3218 LogIt "BusyBox sources are available from http://www.busybox.net"
3219 LogIt "------------------------------------------------------------------------------"
3220else
3221 LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3222fi
3223if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3224 LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3225else
3226 LogIt "ERROR: Unable to find mindi-busybox, please install it"
3227 MindiExit -1
3228fi
3229
3230for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3231 modinfo $i 2> /dev/null 1> /dev/null
3232 if [ $? -eq 0 ]; then
3233 modprobe $i 2>&1 > /dev/null
3234 fi
3235done
3236
3237KERN_DISK_MADE=""
3238
3239LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3240LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3241LogFile "NOT_BOOT = '$NOT_BOOT'"
3242if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3243 LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3244 MakeMondoConfigFile $MINDI_TMP/$MRCFG
3245 MakeMountlist $MINDI_TMP/mountlist.txt
3246 CheckMountlist $MINDI_TMP/mountlist.txt
3247 mkdir -p $MINDI_TMP/small-all/tmp
3248 cd "$MINDI_TMP/small-all"
3249 cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3250 tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3251 sleep 2
3252 LogIt "Done. Exiting."
3253 MindiExit 0
3254fi
3255
3256if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3257 LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3258fi
3259
3260if [ "$kernelpath" = "" ] ; then
3261 [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3262 echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3263 read ch
3264 if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3265 USE_OWN_KERNEL="yes"
3266 else
3267 USE_OWN_KERNEL="no"
3268 fi
3269 if [ "$USE_OWN_KERNEL" = "yes" ]; then
3270 kernelpath=`TryToFindKernelPath`
3271 if [ "$kernelpath" = "" ] ; then
3272 echo -n "Please enter kernel path : "
3273 read kernelpath
3274 fi
3275 fi
3276fi
3277
3278echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3279[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3280
3281mountpoint=$MINDI_TMP/mountpoint.$$
3282PrepareDataDiskImages
3283
3284ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3285rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3286export ramdisk_size=$rds
3287
3288LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3289if [ "$ARCH" = "ia64" ] ; then
3290 PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3291else
3292 PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3293fi
3294
3295[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3296...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3297
3298if [ _"$MONDO_SHARE" = _"" ]; then
3299 ListImagesForUser
3300 OfferToMakeBootableISO
3301 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3302 OfferToMakeBootableUSB
3303 fi
3304 LogAll "Finished."
3305elif [ "$TAPEDEV" ] ; then
3306 if [ "$ARCH" != "ia64" ] ; then
3307 # We need to keep the img file as boot file for ia64 platform
3308 rm -f $MINDI_CACHE/{*img,*iso}
3309 else
3310 rm -f $MINDI_CACHE/*iso
3311 fi
3312 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3313 OfferToMakeBootableUSB
3314 fi
3315 OfferToMakeBootableISO
3316 if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3317 cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3318 else
3319 Die "Cannot find all.tar.gz, to be written to tape"
3320 fi
3321elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3322 OfferToMakeBootableUSB
3323else
3324 OfferToMakeBootableISO
3325fi
3326# cleanup
3327LogAll "INFO: $FRIENDLY_OUTSTRING"
3328for mtpt in $FLOPPY_WAS_MOUNTED ; do
3329 mount $mtpt
3330done
3331MindiExit 0
Note: See TracBrowser for help on using the repository browser.