source: MondoRescue/branches/3.2/mindi/mindi @ 3270

Last change on this file since 3270 was 3270, checked in by Bruno Cornec, 7 years ago
  • Remove now useless mr-net-find
  • Rename in mindi the conf file mondo-restore.cfg into mondorestore.cfg for homogeneity
  • NETFS-SERVER-MOUNT remains the only built file by mondo for net configuration and mindi now uses mr-net-get-config to build the network conf
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 121.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3270 2014-04-29 19:17:02Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/vconsole.conf" ] ; then
391        LogFile "INFO: New Fedora style config detected."
392        keyfile=/etc/vconsole.conf
393    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
394        LogFile "INFO: Slackware-style config detected."
395        keyfile=/etc/rc.d/rc.keymap
396    elif [ -e "/etc/rc.config" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        keyfile=/etc/rc.config
399    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
400        LogFile "INFO: Debian-style config detected."
401        mkdir -p $bigdir/tmp
402        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
403        KBDEPTH=0
404        mkdir -p $bigdir/etc/console
405        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
406        echo ""
407        echo -e "$DONE"
408        return 0
409    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
410        LogFile "INFO: Ubuntu-style config detected."
411        mkdir -p $bigdir/tmp
412        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
413            kbdfile="/etc/console-setup/boottime.kmap.gz"
414        else
415            kbdfile="/etc/console-setup/cached.kmap.gz"
416        fi
417        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
418        KBDEPTH=0
419        mkdir -p $bigdir/etc/console-setup
420        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
421        echo ""
422        echo -e "$DONE"
423        return 0
424    elif [ -e "/etc/rc.conf" ] ; then
425        LogFile "INFO: ArchLinux config detected."
426        keyfile=/etc/rc.conf
427    elif [ -e "/etc/conf.d/keymaps" ] ; then
428        LogFile "INFO: Gentoo-style config detected."
429        keyfile=/etc/conf.d/keymaps
430    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
431        LogFile "INFO: X11-style config detected."
432        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
433    else
434        LogFile "Searching for rc.config ..."
435        keyfile=`find /etc -name rc.config | head -n1`
436        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
437            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
438            return
439        else
440            LogFile "INFO: Found $keyfile"
441        fi
442    fi
443    if [ ! -e "$KEYDIR/keymaps" ] ; then
444        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
445        return
446    fi
447    LogFile "INFO: keyfile=$keyfile"
448    # For SLES we need to remove the .map.gz extension Cf #614
449    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
450    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
451    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
452    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
453    LogFile "INFO: locale=$locale"
454    #
455    # Process the keymaps dir once for all
456    # AddKeyboardMappingFile will use it recursively
457    #
458    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
459    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
460    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
461    # If we have multiple keymaps then log it !!
462    echo "$mp" | grep -q " " >> $LOGFILE
463    if [ $? -eq 0 ]; then
464        LogAll "WARNING: Multiple keymaps found: $mp"
465        LogFile "INFO: The following one will be used"
466    fi
467    for i in $mp ; do
468        mappath=$i
469        [ -e "$i" ] && [ ! -d "$i" ] && break
470    done
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
473    fi
474    LogFile "INFO: mappath = $mappath"
475    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
476        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
477        return
478    fi
479    LogAll "INFO: Adding the following keyboard mapping tables: "
480    mkdir -p $bigdir/tmp
481    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
482    KBDEPTH=0
483    AddKeyboardMappingFile $mappath
484    echo ""
485    echo -e "$DONE"
486    rm -f $MINDI_TMP/keymaps.find
487    return 0
488}
489
490
491FindLdlinux32Binary() {
492    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
496    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
497    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
498    if [ ! -e "$LDLINUXC32" ]; then 
499        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
500        LDLINUXC32=/tmp/idoesnthopefullyexist
501    else
502        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
503    fi
504}
505
506
507FindMboot32Binary() {
508    MBOOTC32=/usr/lib/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
514    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
515    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
516}
517
518FindIsolinuxBinary() {
519    ISOLINUX=/usr/lib/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
526    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
527    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
528}
529
530
531GenerateGiantDependencyList() {
532    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
533
534    echo -en "Analyzing dependency requirements"
535    outfile=$1
536    tempfile=$MINDI_TMP/$$.txt
537    incoming=`ReadLine`
538
539    > $tempfile
540    progress=0
541    res=0
542    noof_lines=$2
543    while [ "$incoming" != "" ] ; do
544        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
545            incoming=`ReadLine`
546            continue
547        fi
548        if [ "$incoming" = "LVMFILES:" ] ; then
549            break
550        fi
551        filelist=`GenerateListForFile "$incoming"`
552        r=$?
553        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
554        res=$(($res+$r))
555#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
556        for fname in $filelist ; do
557                [ "$fname" != "" ] && echo "$fname" >> $tempfile
558        done
559        progress=$(($progress+1))
560        LogProgress $progress $noof_lines
561        incoming=`ReadLine`
562    done
563    if  [ "$incoming" = "LVMFILES:" ] ; then
564        incoming=`ReadLine`
565        lvmversion=""
566        while [ "$incoming" != "" ] ; do
567            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
568                incoming=`ReadLine`
569                continue
570            fi
571            filelist=`GenerateListForFile "$incoming"`
572            for tool in $filelist ; do
573                lvmresolved=`readlink -f $tool`
574                if [ "$tool" = "$lvmresolved" ]; then
575                    echo "$tool" >> $tempfile
576                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
577                    if [ "$lvmversion" = "" ] ; then
578                        lvmversion=`$lvmresolved`
579                        echo "$lvmresolved" >> $tempfile
580                    fi
581                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
582                    if [ "$lvmversion" = "200" ]; then
583                        # pvdata and lvmcreate_initrd don't exist in LVM2
584                        case "$toolstripped" in
585                        "pvdata")
586                            continue
587                            ;;
588                        "lvmcreate_initrd")
589                            continue
590                            ;;
591                        esac
592                    fi
593                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
594                    if [ -e "$toolpath" ] ; then
595                        echo "$toolpath" >> $tempfile
596                        echo "$tool" >> $tempfile
597                    else
598                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
599                    fi
600                    if [ -e "$toolpath" ] ; then
601                        echo "$toolpath" >> $tempfile
602                        echo "$tool" >> $tempfile
603                    else
604                        echo "Where are your LVM-Tools? Couldn't find $tool"
605                    fi
606                else
607                    echo "$tool" >> $tempfile
608                fi
609            done
610            progress=$(($progress+1))
611            LogProgress $progress $noof_lines
612            incoming=`ReadLine`
613        done
614    fi
615    echo -en "$DONE\nMaking complete dependency list"
616
617    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
618    mv -f $tempfile.new $tempfile
619    > $outfile.pre
620    progress=0
621    noof_lines=`cat $tempfile | wc -l`
622    LogFile "---------------------------------"
623    LogFile "List of dependencies:             "
624    LogFile "---------------------------------"
625    for fname in `cat $tempfile` ; do
626        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
627        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
628        progress=$(($progress+1))
629        LogProgress $progress $noof_lines
630    done
631    if [ _"$MONDO_SHARE" != _"" ]; then
632        mkdir -p $bigdir/tmp
633        mkdir -p $bigdir/usr/bin
634        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
635            LogAll "\nINFO: Incorporating post-nuke tarball"
636            old_pwd=`pwd`
637            cd "$bigdir"
638            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
639            cd "$old_pwd"
640        fi
641        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
642            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
643        else
644            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
645            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
646            LogIt "       If Mindi was called by Mondo then send me a bug report."
647            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
648            LogIt "       Finally, run Mindi again."
649            Die "Odd."
650        fi
651        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
652        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
653            LogAll "\nINFO: Incorporating Network-related settings"
654            for r in NETFS-* ISO-PREFIX ; do
655                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
656                LogFile "INFO: Copying $r to ramdisk"
657            done
658        fi
659    fi
660    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
661    rm -f $tempfile $outfile.pre
662    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
663    return $res
664}
665
666
667GenerateListForFile() {
668    local files_found loc fname incoming i res
669    incoming="$1"
670    files_found=""
671    res=0
672
673    for fname in $incoming ; do
674        files_found="$files_found `LocateFile $fname`"
675    done
676
677    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
678}
679
680
681# Returns all disk devices which are part of a raid array
682GetAllRaidMembers() {
683    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
684}
685
686
687GetFileSizeList() {
688    local i
689    for i in `find $1 -type d -o -print` ; do
690        du -sk $i
691    done
692}
693
694
695# Check kernel filesystem capabilites for accessing initrd image
696# Could be ext2 FS (old mode) or initramfs (new mode)
697#
698# Interface definition:
699# param #1: absolute path to kernel image
700GetInitrdFilesystemToUse() {
701
702    # interface test: make sure we have one parameter
703    if [ $# -ne 1 ]; then
704        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
705    fi
706
707    # interface parameters
708    local lvKernelImage=$1
709
710    # local constants (filesystem magic strings)
711    local lcMagicCramfs="<3>cramfs: wrong magic"
712    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
713    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
714    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
715
716    # local variables
717    local lvOffset
718    local lvScanRes
719    local lvUseFilesystem
720
721    # say where we are.
722    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
723
724    # verify that file exists
725    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
726
727    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
728    file $lvKernelImage 2>&1 | grep -q gzip
729    if [ $? -eq 0 ]; then
730        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
731        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
732    else
733        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
734        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
735        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
736        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
737        if [ $lvOffset -eq 0 ]; then
738            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
739            lvScanRes=$lcMagicInitfs
740        else
741            lvOffset=`expr $lvOffset / 2`
742            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
743            # scan again  kernel image
744            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
745        fi
746    fi
747
748    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
749    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
750        lvUseFilesystem="ext2fs"
751    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
752        lvUseFilesystem="ext3fs"
753    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
754        lvUseFilesystem="initramfs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
756        lvUseFilesystem="cramfs"
757    else
758        # In that case, we are most probably after 2.6.30 and use the supported initramfs
759        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
760        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
761        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
762        lvUseFilesystem="initramfs"
763    fi
764
765    # say what we are using
766    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
767
768    # return file system to use
769    echo "$lvUseFilesystem"
770
771}
772
773# Searches members of raid device
774# $1: raid device (/dev/md...)
775GetRaidDevMembers() {
776    if [ ! -f /etc/raidtab ]; then 
777        return
778    fi
779    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
780}
781
782
783ListAllPartitions() {
784    local res currline partition all_partitions ap_orig remaining i j
785
786    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
787    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
788    if [ -e "/vmfs/volumes" ]; then
789        # For VMWare ESX 3 get the device names of these volumes
790        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
791    fi
792    return
793}
794
795
796ListImagesForUser() {
797    local path fname
798    path=$MINDI_CACHE
799    echo -en "In the directory '$path' you will find the images:-\n"
800    for fname in `ls $path | grep -F mindi-` ; do
801        printf "%19s " $fname
802    done
803    echo " "
804}
805
806
807ListKernelModulePaths() {
808    local module_list module fname r kern
809    module_list="$MODULES"
810    # Remove unwanted modules from list
811    for i in $DENY_MODS; do
812        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
813        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
814    done
815###
816### Sq-Modification ... Use kernelname for module search path if specified
817###
818    if [ "${kernelname}" != "" ]
819    then
820        kern=${kernelname}
821    else
822        kern="$KERVERRUN"
823    fi
824    export KERVER=$kern
825###
826### Sq-Mod End
827###
828    # Get rid of duplicates, so that if a live kernel module also appears
829    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
830    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
831        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
832        if [ -z "$r" ]; then
833            if [ "`echo "$MODULES" | grep -w $module`" ]; then
834                r="[live module file not found]"
835            else
836                r="[extra module file not found]"
837            fi
838        else
839            [ -f "$r" ] && echo "$r"
840        fi
841        LogFile "INFO: module $module --> $r"
842    done
843    find /lib/modules/$kern/modules.* -type f 2> /dev/null
844}
845
846#
847# Critical function which computes all dependencies (dyn. lib.)
848# for a list of binaries
849#
850LocateDeps() {
851    local incoming fname deps
852    incoming="$*"
853    deps=""
854
855    for fname in $incoming ; do
856        if [ ! -e "$fname" ] ; then
857            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
858            if echo $fname | grep lvm &> /dev/null ; then
859                LogFile "          This warning only affects you if you are using LVM."
860                if echo "$MODULES" | grep lvm &> /dev/null ; then
861                    LogFile "          I think you are, so please take heed!"
862                else
863                    LogFile "          I don't think you are, so don't worry about it."
864                fi
865            fi
866        else
867            deps="$deps $fname" 
868        fi
869    done
870    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
871}
872
873
874# Give all symlinks recursively of a full path name
875ReadAllLink() {
876    file="$1"
877
878    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
879        # We need to normalise the path with .. in it
880        file=`echo $file | perl -p -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
881    done
882    echo "$file"
883    if [ ! -h $file ]; then
884        return 0
885    fi
886
887    link=`readlink $file`
888    d=`dirname $file`
889    # Is link a relative or full path name
890    fchar=`echo $link | cut -c1`
891    # If mother dir is a link print it
892    if [ -h "$d" ]; then
893        echo "$d"
894        d2=`readlink $d`
895        c2=`echo $d2 | cut -c1`
896        if [ "$c2" != "/" ]; then
897            if [ "$c2" != "." ]; then
898                d="/$d2"
899            else
900                d="$d/$d2"
901            fi
902        fi
903        echo "$d/`basename $file`"
904    fi
905    if [ "$fchar" != "/" ]; then
906        # Relative or local link
907        ReadAllLink "$d/$link" 
908    else
909        # Absolute path
910        ReadAllLink $link 
911    fi
912}
913
914
915LocateFile() {
916    local i j path fname_to_find location output resolved tmp stub cache_id loclist
917    fname_to_find="$1"
918    # It's an absolute path
919    j=`echo "$fname_to_find" | cut -c1`
920    if [ _"$j" = _"/" ]; then
921        dn=`dirname $fname_to_find`
922        # We suppose that the link is already included, just add the new file
923        if [ -h "$dn" ]; then
924            newdn=`readlink -f $dn`
925            bn=`basename $fname_to_find`
926            output="$newdn/$bn"
927        else
928            output="$fname_to_find"
929        fi
930        if [ -h "$output" ] ; then
931            output="`mr-read-all-link $output` $output"
932        fi
933        echo "$output"
934        return 0
935    fi
936    # It's not an absolute path
937    output=""
938    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
939    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
940        [ -h "$path" ] && continue
941        [ ! -e "$path/$fname_to_find" ] && continue
942        output="$path/$fname_to_find $output"
943        if [ -h "$path/$fname_to_find" ] ; then
944            output="`mr-read-all-link $path/$fname_to_find` $output"
945        fi
946    done
947    if [ "$output" = "" ] ; then
948        return 1
949    fi
950    echo "$output"
951    return 0
952}
953
954LogProgress() {
955    local i progress modres noof_lines
956 
957    progress=$1
958    noof_lines=$2
959
960    echo -en "\r\t\t\t\t\t\t\t\t"
961    i=$(($progress*100))
962    if [ $noof_lines -ne 0 ]; then
963        i=$(($i/$noof_lines))
964    else
965        i=0
966    fi
967    echo -en "$i"
968    echo -en "%"
969    modres=$(($progress%4))
970    [ "$modres" -eq "0" ] && echo -en "\t/"
971    [ "$modres" -eq "1" ] && echo -en "\t-"
972    [ "$modres" -eq "2" ] && echo -en "\t\\"
973    [ "$modres" -eq "3" ] && echo -en "\t|"
974}
975
976# Called by TurnTgzIntoRdz, to make /tmp/mondorestore.cfg
977MakeMondoConfigFile() {
978    local outfile use_lzo use_comp use_star
979    outfile=$1
980    > $outfile
981    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
982    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
983    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
984    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
985    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
986    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
987    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
988    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
989    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
990    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
991    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
992    echo "use-lzo $use_lzo" >> $outfile
993    echo "use-gzip $use_gzip" >> $outfile
994    echo "use-star $use_star" >> $outfile
995    echo "use-lzma $use_lzma" >> $outfile
996    echo "use-comp $use_comp" >> $outfile
997    echo "datestamp `date`" >> $outfile
998    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1013    # Deal with network configuration in a portable way
1014    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1015        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1016        grep netfs-server-path $outfile | awk '{print $2}' > $MINDI_TMP/NETFS-SERVER-PATH
1017    fi
1018}
1019
1020# Get PV's for an LV
1021GetPVsForLV() {
1022  if [ -n "$1" ]; then
1023    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1024    if [ -z "$vg" ]; then
1025      return
1026    fi
1027    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1028  fi
1029}
1030
1031
1032MakeMountlist() {
1033    local mountlist all_partitions current_partition \
1034partition_size partition_format outstring partition_number \
1035partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1036absolute_partition old_partition_fmt current_lvolume uname skip
1037
1038    LogFile "------------------------------------"
1039    LogFile "Your raw fstab file looks like this:"
1040    LogFile "------------------------------------"
1041    cat $MY_FSTAB >> $LOGFILE
1042    LogAll "-----------------------------------"
1043    LogAll "Your mountlist will look like this:"
1044    LogAll "-----------------------------------"
1045
1046# mountlist(OUT)
1047    mountlist=$1
1048
1049# NB: partition = device
1050# NB: mountpt = where the device is mounted
1051
1052    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1053
1054    [ "$mountlist" != "" ] && rm -Rf $mountlist
1055    > $mountlist
1056    all_partitions=""
1057   
1058    if [ $LVM != "false" ]; then
1059        LogAll "INFO: Analyzing LVM..."
1060        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1061        if [ $? -ne 0 ]; then
1062            LVM="false"
1063        fi
1064        # Excluded LVs and GVs are not reported here
1065        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1066    fi
1067    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1068    for i in $IMAGE_DEVS ; do
1069        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1070    done
1071    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1072    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1073    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1074    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1075    for c_p in $all_partitions ; do
1076        # Skip fd/cd devices, network FS, cifs
1077        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1078        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1079        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1080            current_partition=`readlink -f $c_p`
1081            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1082                current_partition="$c_p"
1083            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1084                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1085                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1086            fi
1087            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1088        else
1089            current_partition="$c_p"
1090        fi
1091        [ "$c_p" = "none" ] && continue
1092        redhat_label=""
1093        label=""
1094        uuid=""
1095        absolute_partition=`readlink -f $c_p`
1096        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1097
1098        # set default in case we dont't find it
1099        str_to_find_fmt_with=$current_partition
1100
1101        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1102        # current_partition contains only first column of /etc/fstab
1103        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1104            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1105            actual_dev=""
1106
1107            # 1st try, findfs - the RHEL way of finding labels and their partitions
1108            if [ -x "/sbin/findfs" ]; then
1109                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1110            fi
1111   
1112            # 2nd try : blkid, the good way for all LABEL except swap
1113            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1114                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1115                # For LVM FS it will give a /dev/dm-# which should then be converted
1116                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1117                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1118                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1119                    for dev in `ls /dev/mapper/*`; do
1120                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1121                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1122                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1123                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1124                            break
1125                        fi
1126                    done
1127                fi
1128            fi
1129   
1130            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1131            # For LVM gives a /dev/mapper entry
1132            if [ "x$actual_dev" = "x" ]; then
1133                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1134            fi
1135   
1136            # 4th try, with vol_id
1137            # SWAP only
1138            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1139                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1140                for dev_swap in $list_swaps ; do
1141                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1142                    if [ "x$dev_exists" != "x" ]; then
1143                        actual_dev=$dev_swap
1144                        break;
1145                    fi
1146                done
1147            fi
1148
1149            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1150            # LABEL=SW-cciss/c0d0p3 (RDP)
1151            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1152            # SWAP only
1153            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1154                    skip=""
1155                    uname=$KERVERRUN
1156                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1157                    # 2.6.12 needs 16 (FC3)
1158                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1159                    # 2.6.19 and upper needs 1052
1160                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1161                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1162                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1163                    if [ $skip = "" ]; then
1164                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1165                    fi
1166                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1167                    do
1168                        # Location of the swap label for kernel 2.6
1169                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1170                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1171                            actual_dev=$try_dev
1172                        fi
1173                    done
1174            fi
1175
1176            # Check if one of all those tries has known success
1177            if [ "x$actual_dev" != "x" ]; then
1178                current_partition=$actual_dev
1179            else
1180                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1181            fi
1182        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1183        # current_partition contains only first column of /etc/fstab
1184        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1185            uuid=`echo "$current_partition" | cut -d'=' -f2`
1186            actual_dev=""
1187
1188            # 1st try, findfs - the RHEL way of finding labels and their partitions
1189            if [ -x "/sbin/findfs" ]; then
1190                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1191            fi
1192   
1193            # 2nd try : blkid, the good way for all UUID except swap
1194            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1195                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1196                # For LVM FS it will give a /dev/dm-# which should then be converted
1197                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1198                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1199                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1200                    for dev in `ls /dev/mapper/*`; do
1201                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1202                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1203                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1204                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1205                            break
1206                        fi
1207                    done
1208                fi
1209            fi
1210   
1211            # 3th try, with vol_id
1212            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1213                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1214                for dev in $list_dev ; do
1215                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1216                    if [ "x$dev_exists" != "x" ]; then
1217                        actual_dev=$dev
1218                        break;
1219                    fi
1220                done
1221            fi
1222
1223            # 4th try, with dumpuuid (VMWare only ?) for swap
1224            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1225                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1226                for dev in $list_dev ; do
1227                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1228                    if [ "x$dev_exists" != "x" ]; then
1229                        actual_dev=$dev
1230                        break;
1231                    fi
1232                done
1233            fi
1234
1235            # Check if one of all those tries has known success
1236            if [ "x$actual_dev" != "x" ]; then
1237                current_partition=$actual_dev
1238            else
1239                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1240            fi
1241        else
1242            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1243            # they use symlinks in fstab unrelated to what is shown in mount !
1244            if [ _"$partition_mountpt" = _"" ]; then
1245                # set default in case we dont't find it
1246                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1247                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1248                            str_to_find_fmt_with=$tmpp
1249                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1250                            break;
1251                        fi
1252                done
1253            fi
1254        fi
1255
1256        # Detects noauto partitions not mounted and exclude them
1257        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1258        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1259                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1260            continue
1261        fi
1262        # Detects bind partitions and exclude them
1263        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1264                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1265            continue
1266        fi
1267
1268        # Look for devices which have to be excluded
1269        skip=0
1270        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1271            l=""
1272            list_of_devices="`mr-read-all-link $current_partition`"
1273            for d in $list_of_devices; do
1274                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1275            done
1276
1277            # Remove PVs from LVs excluded
1278            l="$l `GetPVsForLV $current_partition`"
1279
1280            # We want a single unique list
1281            list_of_devices="`echo $l | sort -u`"
1282
1283            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1284                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1285                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1286                    skip=1
1287                    continue
1288                fi
1289            done
1290        fi
1291        if [ $skip -eq 1 ]; then
1292            continue
1293        fi
1294
1295        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1296        # Detects iso9660 ISO images and exclude them
1297        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1298                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1299            continue
1300        fi
1301        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1302        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1303        # the former is then a link to the latter, so we test whether
1304        # $current_partition is actually such a link or not and set
1305        # $current_lvolume accordingly. On Debian you may find more than one answer
1306        # so we remove the one corresponding to /dev/.static
1307        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1308        # principle is the same and we need to find the link to it as well.
1309        # Note that $current_lvolume may well be an
1310        # ordinary device. It is just to make sure that we feed the right value
1311        # into any of the LVM tools if possible.
1312
1313        current_lvolume="$current_partition"
1314        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1315            # .static dir are a Debian specificity
1316            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1317            echo $current_lvolume | grep -q ' '
1318            if [ $? -eq 0 ]; then
1319                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1320            fi
1321            # if it's not found, it may well be a real device such as a multipath one
1322            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1323            if [ _"$current_lvolume" = _"" ]; then
1324                current_lvolume="$current_partition"
1325            fi
1326        fi
1327        #
1328        # End of LVM device style variation code (other than $current_lvolume).
1329
1330        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1331            # Size computed via LVM not directly
1332            partition_size="lvm"
1333        else
1334            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1335            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1336            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1337                # Skip swap files
1338                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1339                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1340                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1341                [ "$partition_format" != "swap" ] && partition_format="swap"
1342                if [ "$partition_size" = "" ] ; then
1343                    totalsize=0
1344                    items=0
1345                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1346                        totalsize=$(($totalsize+$i))
1347                        items=$(($items+1))
1348                    done
1349                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1350                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1351                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1352                fi
1353            else
1354                partition_size=`SizeOfPartition $current_partition`
1355            fi
1356        fi
1357        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1358        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1359        if [ "$partition_mountpt" = "" ] ; then
1360            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1361                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1362                    partition_mountpt="raid"
1363                    partition_format="raid"
1364                else
1365                    partition_mountpt="lvm"
1366                    partition_format="lvm"
1367                fi
1368            fi
1369        fi
1370        psz=$partition_size
1371        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1372        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1373        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1374            partition_mountpt="image"
1375            old_partition_fmt=$partition_format
1376            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1377            partition_size=$(($partition_size+1)); # just in case
1378            if [ "$partition_format" = "Linux" ] ; then
1379                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1380                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1381                partition_format=$old_partition_fmt
1382            fi
1383        fi
1384
1385        if [ ! "$partition_mountpt" ] ; then
1386            LogFile "------- $FDISK -l $qq log ------------"
1387            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1388                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1389                [ "$partition_format" ] && break
1390            done
1391            LogFile "------- $FDISK log end ------------"
1392            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1393                partition_format="compaq"
1394            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1395                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1396                continue
1397            fi
1398        fi
1399        if [ "$redhat_label" ]; then
1400            label="$redhat_label"
1401        elif [ "$uuid" ]; then
1402            label="$uuid"
1403        fi
1404        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1405        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1406        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1407        if [ "$current_partition" = "" ] ; then
1408            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1409        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1410            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1411                partition_mountpt=raid
1412                partition_format=raid
1413                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1414                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1415            else
1416                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1417            fi
1418        elif [ "$partition_format" = "" ] ; then
1419            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1420        elif [ "$partition_size" = "" ] ; then
1421            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1422        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1423            continue
1424        else
1425            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1426                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1427                partition_format="vfat"
1428            fi
1429            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1430            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1431        fi
1432    done
1433    LogAll "-----------------------------------" 
1434}
1435
1436CheckMountlist() {
1437    local file=$1
1438    # Coherency verification
1439    ML01=`cat $file | wc -l`
1440    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1441    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1442    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1443    if [ "$ML01" -ne "$ML1" ]; then
1444        LogFile "--------------------------------------------"
1445        LogAll "WARNING: Duplicate device entry in mountlist"
1446        LogFile "--------------------------------------------"
1447    fi
1448    if [ "$ML02" -ne "$ML2" ]; then
1449        LogFile "--------------------------------------------"
1450        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1451        LogFile "------------------------------------------------"
1452    fi
1453}
1454
1455OfferToMakeBootableISO() {
1456    local i old_pwd
1457    if [ -z "$ISO_CMD" ]; then
1458        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1459        return
1460    fi
1461    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1462        echo -en "Shall I make a bootable CD image? (y/[n]) "
1463        read i
1464        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1465    fi
1466    rm -Rf $MINDI_TMP/iso
1467    mkdir -p $MINDI_TMP/iso/{images,archives}
1468    LogFile "INFO: mindi_lib = $MINDI_LIB"
1469    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1470    for i in memdisk memtest.bin memtest.img ; do
1471        j=$MINDI_LIB/$i
1472        k=$MINDI_TMP/iso
1473        if [ -e "$j" ] ; then
1474            LogAll "INFO: Copying $j to $k"
1475            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1476            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1477            if [ _"$MONDO_SHARE" != _"" ]; then 
1478                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1479            fi
1480        fi
1481    done
1482    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1483    if [ $KERNEL_IS_XEN = "yes" ]; then
1484        FindMboot32Binary
1485        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1486        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1487    fi
1488    # Useful for syslinux 5.x
1489    FindLdlinux32Binary
1490    if [ -e $LDLINUXC32 ]; then
1491        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1492    fi
1493    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1494    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1495
1496    if [ _"$MONDO_SHARE" != _"" ]; then 
1497        if [ $KERNEL_IS_XEN = "yes" ]; then
1498            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1499            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1500        fi
1501        if [ -e $LDLINUXC32 ]; then
1502            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1503        fi
1504        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1505        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1506    fi
1507    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1508    if [ "$ARCH" != "ia64" ] ; then
1509        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1510    fi
1511    old_pwd=`pwd`
1512    cd "$MINDI_TMP/iso"
1513    if [ "$ARCH" != "ia64" ] ; then
1514        if [ _"$MONDO_SHARE" != _"" ]; then 
1515            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1516            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1517                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1518            fi
1519            if [ $KERNEL_IS_XEN = "yes" ]; then
1520                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1521            fi
1522            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1523        fi
1524        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1525    else
1526        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1527    fi
1528    if [ "$?" -ne "0" ] ; then
1529        LogFile "----------- $ISO_CMD's errors --------------"
1530        LogAll "$ISO_CMD returned the following errors:"
1531        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1532        LogAll "ERROR: Failed to create ISO image."
1533    else
1534        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1535    fi
1536    rm -f $MINDI_TMP/mkisofs.log
1537    cd "$old_pwd"
1538}
1539
1540
1541OfferToMakeBootableUSB() {
1542    local i
1543    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1544        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1545        read i
1546        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1547        if [ "$USBDEVICE" = "" ]; then
1548            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1549            read dev
1550            USBDEVICE=$dev
1551        fi
1552        echo "WARNING: This will erase all content on $USBDEVICE"
1553        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1554        read i
1555        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1556    fi
1557    rm -Rf $MINDI_TMP/usb
1558    mkdir -p $MINDI_TMP/usb
1559    USBPART="${USBDEVICE}1"
1560
1561    echo -en "Transforming $USBDEVICE in a Bootable device " 
1562    echo -en "."
1563    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1564    LogFile "INFO: Checking $USBDEVICE"
1565    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1566    if [ $? -ne 0 ]; then
1567        LogAll "ERROR: Unable to access $USBDEVICE"
1568        LogAll "       Make sure your USB device is plugged in"
1569        MindiExit -1
1570    fi
1571    echo -en "."
1572    # Some distro do auto mount at that point (Ubuntu)
1573    LogFile "INFO: Unmounting $USBPART just in case"
1574    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1575    # If your key has no MBR it may cause an issue
1576    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1577    if [ -r $MBRFILE ]; then
1578        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1579        dd if=$MBRFILE of=$USBDEVICE
1580    else
1581        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1582        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1583    fi
1584    LogFile "INFO: Preparing $USBDEVICE"
1585    cat > $MINDI_TMP/fdisk.txt << EOF
1586d
1587d
1588d
1589d
1590n
1591p
15921
1593
1594
1595t
1596b
1597a
15981
1599w
1600EOF
1601    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1602    if [ $? -ne 0 ]; then
1603        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1604        LogAll "       Make sure your USB device is plugged in"
1605        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1606        MindiExit -1
1607    fi
1608    LogFile "fdisk build file"
1609    LogFile "----------------"
1610    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1611    LogFile "----------------"
1612    rm -f $MINDI_TMP/fdisk.txt
1613    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1614    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1615    echo -en "."
1616    # Calling kpartx in case devices were not created
1617    if [ -x "/sbin/kpartx" ]; then
1618        /sbin/kpartx -a $USBDEVICE
1619    fi
1620    # Some distro do auto mount at that point (Ubuntu)
1621    LogFile "INFO: Unmounting $USBPART just in case again"
1622    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1623    echo -en "."
1624    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1625    if [ "`which dmsetup`" != "" ]; then
1626        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1627        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1628            LogFile "INFO: Removing $block_id from device mapper."
1629            sleep 1
1630            dmsetup remove $block_id
1631        fi
1632    fi
1633    echo -en "."
1634    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1635    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1638        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1639        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1640        MindiExit -1
1641    fi
1642    echo -en "."
1643    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1644    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1645    if [ $? -ne 0 ]; then
1646        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1647        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1648        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1649        MindiExit -1
1650    fi
1651    echo -en "."
1652    mkdir -p $MINDI_TMP/usb/images
1653    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1654    echo -en "."
1655    LogFile "INFO: mindi_lib = $MINDI_LIB"
1656    for i in memdisk memtest.bin memtest.img ; do
1657        j=$MINDI_LIB/$i
1658        k=$MINDI_TMP/usb
1659        if [ -e "$j" ] ; then
1660            LogIt "INFO: Copying $j to $k"
1661            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1662            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1663        fi
1664    done
1665    echo -en "."
1666    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1667    echo -en "."
1668    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1669    echo -en "."
1670    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1671    echo -en "."
1672    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1673    echo -en "."
1674    LogAll "----------- syslinux's conf --------------"
1675    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1676    LogAll "------------------------------------------"
1677    umount $MINDI_TMP/usb
1678    if [ "$ARCH" != "ia64" ] ; then
1679        syslinux -v 2>&1 | grep -q 4.02
1680        if [ $? -eq 0 ]; then
1681            # This buggy version of syslinux requires a call to --stupid and not -s
1682            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1683            res=$?
1684        else
1685            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1686            res=$?
1687        fi
1688        if [ $res -ne 0 ] ; then
1689            LogAll "----------- syslinux's errors --------------"
1690            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1691            LogAll "------------------------------------------"
1692            LogIt "ERROR: Failed to create USB image."
1693        else
1694            echo -e "$DONE"
1695            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1696        fi
1697        rm -f $MINDI_TMP/syslinux.log
1698    else
1699        LogAll "ERROR: No USB boot support for ia64"
1700        MindiExit -1
1701    fi
1702}
1703
1704
1705MakeMessageFile() {
1706   
1707    if [ -x "/bin/lsb_release" ]; then
1708        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1709    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1710        DESC="Arch Linux"
1711        if [ -r /var/log/pacman.log ]; then
1712            # there are no releases but we can get the last system upgrade
1713            # Output example:   Arch Linux [2011-03-03 01:39]
1714            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1715        fi
1716    elif [ -r /etc/issue.net ]; then
1717        DESC=`head -1 /etc/issue.net`
1718    elif [ -r /etc/issue ]; then
1719        DESC=`head -1 /etc/issue`
1720    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1721        # For pb >= 0.9.8
1722        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1723    else
1724        DESC="Unknown desc"
1725    fi
1726    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1727    if [ _"$MONDO_SHARE" != _"" ]; then
1728        if [ "$CDRECOVERY" != "yes" ] ; then
1729            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1730                echo -en "Press <enter> to continue.\n"
1731            elif [ ! "$MINDI_TMP" ] ; then
1732                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1733                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1734                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1735                fi
1736            else
1737                echo -en "$BOOT_MEDIA_MESSAGE"
1738            fi
1739        else
1740            echo -en "\
1741To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1742CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1743        fi
1744    fi
1745
1746    # Also create the other help screens
1747    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1748    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1749    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1750}
1751
1752
1753MakeBootConfFile() {
1754    local options i ooo
1755    options=""
1756    # Type of boot file (elilo or syslinux/isolinux)
1757    type=$1
1758    if [ "$type" = "elilo" ]; then
1759        sep="="
1760    else
1761        sep=" "
1762    fi
1763
1764    # Generic header for conf file
1765    if [ "$type" != "elilo" ] ; then
1766        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1767    else
1768        echo -en "prompt\n"
1769    fi
1770
1771    # Compute which default option to boot from
1772    if [ "$CDRECOVERY" = "yes" ] ; then
1773        echo -en "default${sep}RESTORE\n"
1774    # In case it's mondoarchive
1775    elif [ _"$MONDO_SHARE" != _"" ]; then
1776        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1777            echo -en "default${sep}iso\n"
1778        else
1779            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1780        fi
1781    else
1782        echo -en "default${sep}expert\n"
1783    fi
1784
1785    # Handle timeout
1786    if [ "$CDRECOVERY" != "yes" ] ; then
1787        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1788    else
1789        echo -en "timeout${sep}10000\n"
1790    fi
1791    echo -en "\n"
1792
1793    # prepare which labels will be generated
1794    if [ "$CDRECOVERY" = "yes" ] ; then
1795        options="RESTORE expert"
1796    else
1797        if [ _"$MONDO_SHARE" != _"" ]; then
1798            options="interactive expert compare iso nuke isonuke"
1799        else
1800            options="expert"
1801        fi
1802    fi
1803
1804    # Generate rest of conf file
1805    for i in $options ; do
1806        ooo=$i
1807        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1808        if [ "$type" = "elilo" ]; then
1809            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1810        else
1811            ps="/"
1812            if [ "$type" = "syslinux" ]; then
1813                ps=""
1814            fi
1815            if [ $KERNEL_IS_XEN = "no" ]; then
1816                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1817            else
1818                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1819            fi
1820        fi
1821        echo -en "$outstr"
1822    done
1823    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1824        if [ "$type" = "elilo" ]; then
1825            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1826            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1827        else
1828            ps="/"
1829            if [ "$type" = "syslinux" ]; then
1830                ps=""
1831            fi
1832            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1833            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1834        fi
1835    fi
1836}
1837
1838
1839PrepareBootDiskImage_LILO() {
1840    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1841    imagesdir=$MINDI_CACHE
1842    kernelpath=$1
1843
1844    retval=0
1845
1846    old_pwd=`pwd`
1847    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1848    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1849    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1850    echo -en "..."
1851    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1852    mkdir -p $mountpoint
1853    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1854    LogFile "Creating vfat filesystem on $imagefile" 
1855    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1856    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1857
1858    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1859    mkdir -p $mountpoint/etc
1860    liloconf=$mountpoint/elilo.conf
1861
1862    MakeBootConfFile elilo > $liloconf
1863
1864    # Copy it so that CD-ROM menu entry is satisfied
1865    mountefi=0
1866    df -T | grep /boot/efi | grep -q vfat
1867    if [ $? -ne 0 ]; then
1868        mount /boot/efi
1869        if [ $? -ne 0 ]; then
1870            echo "You have to mount your EFI partition when using mindi"
1871            MindiExit -1
1872        fi
1873        mountefi=1
1874    fi
1875    el=`find /boot/efi -name elilo.efi`
1876    cp $el $mountpoint
1877    cp $liloconf $mountpoint
1878    if [ $mountefi -eq 1 ]; then
1879        umount /boot/efi 2>&1 > /dev/null
1880    fi
1881
1882    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1883    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1884    if [ "$?" -ne "0" ] ; then
1885        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1886        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1887        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1888        rm -f $MINDI_TMP/mtpt.$$
1889        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1890        retval=$(($retval+1))
1891    fi
1892    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1893
1894    mkdir -p $mountpoint/tmp
1895    if [ -f "$MINDI_TMP/mondorestore.cfg" ]; then
1896        cp -f $MINDI_TMP/mondorestore.cfg $mountpoint/tmp
1897    fi
1898
1899    # copy the kernel across
1900    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1901    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1902    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1903    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1904    if [ "$?" -ne "0" ] ; then
1905        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1906        du -sk $mountpoint/* >> $LOGFILE
1907        LogFile "--- end of list of files ---"
1908        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1909        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1910        cd "$old_pwd"
1911        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1912        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1913    #   losetup /dev/loop0 -d
1914        [ "$imagefile" != "" ] && rm -f $imagefile
1915        LogIt "ERROR: Sorry, your kernel is too big for your image"
1916        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1917        return 0
1918    fi
1919    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1920    LogFile "INFO: Free space left on image = $free_space KB"
1921    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1922    # make it bootable
1923    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1924    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1925    if [ "$KERN_DISK_MADE" ] ; then
1926        LogFile "INFO: Not running LILO. It's not that kind of disk."
1927    fi
1928
1929    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1930    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1931    echo -en "..."
1932    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1933    if [ "$retval" -eq "0" ] ; then
1934        echo -en "...$DONE\n"
1935        if [ "$KERN_DISK_MADE" ] ; then
1936            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1937        fi
1938    else
1939        echo -en "...failed\n"
1940        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1941        [ "$imagefile" != "" ] && rm -f $imagefile
1942    fi
1943    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1944    return $retval
1945}
1946
1947
1948PrepareBootDiskImage_ISOLINUX() {
1949    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1950    imagesdir=$MINDI_CACHE
1951    kernelpath=$1
1952    do_boot_root_thingy=""
1953    retval=0
1954
1955    old_pwd=`pwd`
1956    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1957    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1958    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1959    echo -en "..."
1960    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1961    mkdir -p $mountpoint
1962    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1963    LogFile "INFO: Creating vfat filesystem on $imagefile"
1964    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1965    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1966    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1967
1968    # Only move it now to its final destination and use it now
1969    mv $imagefile $imagesdir
1970    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1971
1972    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1973
1974    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1975    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1976    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1977    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1978    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1979    if [ "$?" -ne "0" ] ; then
1980        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1981        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1982        LogAll "       Please unload some of your modules and try again."
1983        rm -f $MINDI_TMP/mtpt.$$
1984        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1985        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1986        retval=$(($retval+1))
1987    fi
1988
1989    mkdir -p $mountpoint/tmp
1990    if [ -f "$MINDI_TMP/mondorestore.cfg" ]; then
1991        cp -f $MINDI_TMP/mondorestore.cfg $mountpoint/tmp
1992    fi
1993
1994    # copy the kernel across
1995    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1996    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1997    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1998         
1999    retval=0
2000    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2001    retval=$?
2002    if [ $KERNEL_IS_XEN = "yes" ]; then
2003        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2004        let retval+=$?
2005    fi
2006 
2007    if [ "$retval" -ne "0" ] ; then
2008        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2009        du -sk $mountpoint/* >> $LOGFILE
2010        LogFile "--- end of list of files ---"
2011        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2012        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2013        cd "$old_pwd"
2014        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2015        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2016
2017        LogIt "ERROR: Sorry, your kernel is too big for your image"
2018        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2019    fi
2020    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2021    LogFile "INFO: Free space left on image = $free_space KB"
2022    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2023
2024    # make it bootable
2025    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2026    mkdir -p $mountpoint/etc
2027    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2028    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2029    echo -en "..."
2030    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2031
2032    if [ "$retval" -eq "0" ] ; then
2033        echo -en "...$DONE\n"
2034        if [ "$KERN_DISK_MADE" ] ; then
2035            [ "$imagefile" != "" ] && rm -f $imagefile
2036            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2037        fi
2038    else
2039        echo -en "...failed\n"
2040        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2041        [ "$imagefile" != "" ] && rm -f $imagefile
2042    fi
2043    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2044    return $retval
2045}
2046
2047
2048ParseModprobeForIncludes() {
2049local MODPROBE_CONF mpincfile includes include
2050
2051MODPROBE_CONF=/etc/modprobe.conf
2052mpincfile=$1
2053touch $mpincfile
2054if [ -a $MODPROBE_CONF ]; then
2055    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2056    if [ -n "$includes" ]; then
2057        for include in $includes
2058        do
2059            if [ -a "$include" ]; then
2060                echo $include >> $mpincfile
2061            fi
2062        done
2063    fi
2064fi
2065}
2066
2067
2068PrepareDataDiskImages() {
2069    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2070
2071    imagesdir=$MINDI_CACHE
2072    rm -f $imagesdir/mindi.iso
2073    needlist=$MINDI_TMP/what-we-need.txt
2074    bigdir=$MINDI_TMP/bigdir
2075    mkdir -p $bigdir/usr/bin
2076    mkdir -p $bigdir/usr/sbin
2077    includefile=$MINDI_TMP/$$.includefile.txt
2078
2079    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2080    if [ -e "$DEPLIST_FILE" ]; then
2081        lfiles="$DEPLIST_FILE $lfiles"
2082    fi
2083    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2084    ParseModprobeForIncludes $includefile
2085    lines=$(($lines+`cat $includefile | wc -l`))
2086    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2087    res=$?
2088    rm -f $includefile
2089    ListKernelModulePaths >> $needlist
2090    if [ "$res" -ne "0" ] ; then
2091        Die "You have $res files present in dependency list\nbut absent from filesystem."
2092    fi
2093    FindAndAddUserKeyboardMappingFile
2094    mkdir -p $bigdir/tmp
2095    if [ _"$MONDO_SHARE" != _"" ]; then
2096        # BCO: no reason to have the cfg file stored twice
2097        MakeMondoConfigFile $MINDI_TMP/mondorestore.cfg
2098        cp -f $MINDI_TMP/mondorestore.cfg $bigdir/tmp &> /dev/null
2099    fi
2100    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2101    DropOptimizedLibraries $needlist $bigdir
2102    echo -en "Assembling dependency files"
2103
2104    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2105
2106    # also copy io.sys and msdos.sys, if we can find them
2107    for i in `mount | cut -d' ' -f3` ; do
2108        for j in io.sys msdos.sys ; do
2109            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2110        done
2111    done
2112
2113    # master boot record, too
2114    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2115    if [ "$i" ] ; then
2116        LogAll "INFO: Backing up $i's MBR"
2117        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2118        sleep 1
2119        sync
2120        j=$i
2121        [ -h "$j" ] && j=`readlink -f $j`
2122        LogAll "INFO: Creating /dev/boot_device ($j)"
2123        mkdir -p $bigdir/dev
2124        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2125    fi
2126
2127    old_pwd=`pwd`
2128    cd "$bigdir"
2129
2130    # Get terminfo content
2131    ti="usr/share/terminfo/l"
2132    if [ -d /$ti ]; then
2133        mkdir -p $ti
2134        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2135    fi
2136    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2137        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2138        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2139    fi
2140    if [ -d "/lib/dev-state" ]; then 
2141        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2142    fi
2143    cd "$old_pwd"
2144    echo -e "$DONE"
2145    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2146    MakeMountlist $MINDI_TMP/mountlist.txt
2147    CheckMountlist $MINDI_TMP/mountlist.txt
2148    mkdir -p $bigdir/tmp
2149    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2150    if [ _"$MONDO_SHARE" != _"" ]; then
2151        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2152    fi
2153    if [ $LVM != "false" ]; then
2154        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2155        if [ "$?" -ne "0" ]; then
2156            LVM="false"
2157            rm -f $bigdir/tmp/i-want-my-lvm
2158        else
2159            LogFile "Your i-want-my-lvm file content is:"
2160            LogFile "-----------------------------------"
2161            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2162            LogFile "-----------------------------------"
2163        fi
2164    fi
2165    LogFile "Your mountlist.txt file content is:"
2166    LogFile "-----------------------------------"
2167    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2168    LogFile "-----------------------------------"
2169
2170    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2171    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2172    if [ _"$MONDO_SHARE" != _"" ]; then
2173        for q in filelist.full.gz biggielist.txt ; do
2174            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2175            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2176        done
2177    fi
2178
2179    echo -en "Tarring and zipping the data content..."
2180    size_of_all_tools=`du -sk $bigdir | cut -f1`
2181    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2182    LogFile "Size of the data content"
2183    LogFile "------------------------"
2184    du -sk $imagesdir/*gz >> $LOGFILE
2185    LogFile "------------------------"
2186    echo -e "$DONE"
2187
2188    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2189    rm -rf $bigdir
2190    rm -f $needlist
2191}
2192
2193
2194ProcessLDD() {
2195    local incoming f d nd bd bnd
2196    read incoming
2197    while [ "$incoming" != "" ]; do
2198        # We take the full path name of the dyn. lib. we want
2199        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2200        for f in $incoming ; do
2201            # echo modified file name if one of the parent dir is a link
2202            # by replacing the original dirname by the destination of the link
2203            d="`dirname $f`"
2204            found="false"
2205            while [ "$d" != "/" ]; do
2206                if [ -h "$d" ]; then
2207                    nd=`readlink -f $d`
2208                    bd=`basename $d`
2209                    bnd=`basename $nd`
2210                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2211                    echo $d
2212                fi
2213                d="`dirname $d`"
2214            done
2215
2216            echo "$f"
2217            echo "`ReadAllLink $f`"
2218        done
2219        read incoming
2220    done
2221}
2222
2223
2224Prompt() {
2225    echo -en "$1"
2226    read line
2227}
2228
2229
2230ReadLine() {
2231    local i incoming
2232    read incoming
2233    i=0
2234    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2235        i=$(($i+1))
2236        read incoming
2237    done
2238    echo "$incoming"
2239}
2240
2241
2242SizeOfPartition() {
2243    local devpath drive res stub
2244    device=$1
2245    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2246        Die "Cannot find $device's size - is your /etc/fstab sane?"
2247    fi
2248    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2249        res=`SizeOfRaidPartition $device`
2250        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2251        echo "$res"
2252        return 0
2253    fi
2254    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2255    res=`$FDISK -s $device 2>> $LOGFILE`
2256    # end patch
2257    # take only the first in case of multiple mount (cifs, nfs, ...)
2258    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2259    [ "$res" = "" ] && res="-1"
2260    echo $res
2261    return 0
2262}
2263
2264
2265SizeOfRaidPartition() {
2266    local real_dev smallest_size silly tmp
2267
2268    silly=999999999
2269    smallest_size=$silly
2270
2271    for real_dev in `GetRaidDevMembers $1` ; do
2272        tmp=`SizeOfPartition $real_dev`
2273        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2274    done
2275
2276    if [ "$smallest_size" = "$silly" ] ; then
2277        echo "-1"
2278        return 1
2279    else
2280        echo "$smallest_size"
2281        return 0
2282    fi
2283}
2284
2285
2286StripExecutable()
2287{
2288    local tmpfile
2289
2290    tmpfile=$MINDI_TMP/stripped.$$.dat
2291    [ -d "$1" ] || [ -h "$1" ] && return
2292    cp -f $1 $tmpfile 2>> $LOGFILE
2293    strip $tmpfile 2> /dev/null
2294    if [ "$?" -eq "0" ] ; then
2295        cp -f $tmpfile $1 2>> $LOGFILE
2296        LogFile "INFO: Stripped binary $2"
2297    fi
2298    rm -f $tmpfile
2299}
2300
2301KernelVer() {
2302        local fkern_ver fname
2303
2304        fname=$1
2305        file $fname | grep -q gzip
2306        if [ "$?" -eq "0" ] ; then
2307            # Used by ia64
2308            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2309        else
2310            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2311        fi
2312        echo "$fkern_ver"
2313}
2314
2315
2316# WARNING: This function should just echo the final result !!!
2317#
2318TryToFindKernelPath() {
2319    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2320
2321    we_want_version=$KERVERRUN
2322    possible_kernels=""
2323    duff_kernels=""
2324    output=""
2325   
2326    if [ "$ARCH" = "ia64" ] ; then
2327       root="/boot/efi/efi"
2328    else
2329       root="/"
2330    fi
2331    # See if we're booted from a Xen kernel
2332    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2333    if [ -f /proc/xen/capabilities ]; then
2334        # It's a Xen kernel
2335        KERNEL_IS_XEN="yes"
2336        LogFile "INFO: It's a Xen kernel..."
2337    fi
2338
2339    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2340        [ ! -e "$fname" ] && continue
2341        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2342        fkern_ver=`KernelVer $fname`
2343        [ "$fkern_ver" = "" ] && continue
2344        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2345        [ -f "$fname" ] || continue
2346        [ -h "$fname" ] && continue
2347        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2348        file $fname | grep -q gzip
2349        if [ "$?" -eq "0" ] ; then
2350            # Used by ia64
2351            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2352                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2353                duff_kernels="$fname $duff_kernels"
2354            else
2355                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2356                possible_kernels="$fname $possible_kernels"
2357            fi
2358        else
2359            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2360                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2361                duff_kernels="$fname $duff_kernels"
2362            else
2363                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2364                possible_kernels="$fname $possible_kernels"
2365            fi
2366        fi
2367    done
2368    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2369        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2370    fi
2371    if [ ! "$possible_kernels" ] ; then
2372        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2373        possible_kernels="$duff_kernels"
2374        if [ ! "$possible_kernels" ] ; then
2375            LogAll "INFO: Sorry, no duff kernels either"
2376        else
2377            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2378            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2379        fi
2380    fi
2381    if [ $KERNEL_IS_XEN = "yes" ]; then
2382        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2383        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2384    fi
2385    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2386    noof_kernels=`CountItemsIn "$possible_kernels"`
2387    if [ "$noof_kernels" -eq "0" ] ; then
2388        LogAll "Could not find your kernel."
2389        if [ -e "/boot/vmlinuz" ] ; then
2390            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2391            output=/boot/vmlinuz
2392        else
2393            output=""
2394        fi
2395    elif [ "$noof_kernels" -eq "1" ] ; then
2396        kp=`echo "$possible_kernels" | sed s/' '//`
2397        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2398        output="$kp"
2399    else
2400        for i in $possible_kernels ; do
2401            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2402                LogAll "INFO: OK, I used my initiative and found that "
2403                LogAll "INFO: $i is probably your kernel. "
2404                output="$i"
2405                break
2406            fi
2407        done
2408        if [ ! -n "$output" ]; then
2409            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2410                output=/boot/vmlinuz
2411                LogFile "INFO: Schlomo, this one's for you."
2412            else
2413                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2414                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2415                LogFile "INFO: $possible_kernels"
2416                output=""
2417            fi
2418        fi
2419    fi
2420    if [ $KERNEL_IS_XEN = "yes" ]; then
2421        if [ "$noof_xenkernels" -eq "0" ]; then
2422            xenkernelpath=""
2423        elif [ "$noof_xenkernels" -eq "1" ]; then
2424            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2425            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2426        else
2427            for i in $possible_xenkernels ; do
2428                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2429                    LogFile "INFO: OK, I used my initiative and found that "
2430                    LogFile "INFO: $i is probably your Xen kernel. "
2431                    xenkernelpath="$i"
2432                    break
2433                fi
2434            done
2435            if [ ! -n "$xenkernelpath" ]; then
2436                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2437                if [ ! -n "$new_possible_xenkernels" ]; then
2438                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2439                    LogFile "INFO: Using $xenkernelpath"
2440                else
2441                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2442                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2443                    LogFile "INFO: $possible_xenkernels"
2444                    output=""
2445                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2446                    LogFile "INFO: Using $xenkernelpath"
2447                fi
2448            fi
2449        fi
2450        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2451            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2452        fi
2453    fi
2454    LogAll "TryToFindKernelPath found $output"
2455    echo "$output"
2456}
2457
2458
2459TurnTgzIntoRdz() {
2460    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2461
2462    tgz_dir_fname=$1
2463    rdz_fname=$2
2464    kernelsize=$3
2465    maxsize=$(($BOOT_SIZE-$kernelsize))
2466    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2467    tempfile=$MINDI_TMP/temp.rd
2468    res=0
2469    echo -en "..."
2470    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2471    echo -en "..."
2472    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2473    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2474    echo -en "..."
2475    mkdir -p $mountpoint
2476    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2477    echo -en "..."
2478    old_pwd=`pwd`
2479    cd "$mountpoint"
2480
2481    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2482    for d in bin sbin lib lib64; do
2483        if [ -h "/$d" ]; then
2484            thelink=`readlink /$d`
2485            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2486            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2487            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2488                rmdir $mountpoint/$d
2489            fi
2490            if [ ! -h $mountpoint/$d ]; then
2491                rm -f $mountpoint/$d 2> /dev/null
2492                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2493            fi
2494        fi
2495    done
2496    LogFile "INFO: what is now in $mountpoint"
2497    ls -alR $mountpoint >> $LOGFILE
2498   
2499    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2500    for f in $tgz_dir_fname/*; do 
2501        if [ ! -r $f ]; then
2502            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2503        else
2504            cp -Rdf $f . 2>&1 >> $LOGFILE
2505        fi
2506    done
2507    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2508    ln -sf usr/sbin/init linuxrc
2509
2510    cd dev || Die "Can't cd to dev"
2511    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2512    rm -f dev-entries.tgz
2513    cd ..
2514
2515    for w in insmod.static insmod.static.old ; do
2516        s=`which $w 2> /dev/null`
2517        if [ -e "$s" ] ; then
2518            tar cf - -C / $s 2> /dev/null | tar xf -
2519        fi
2520    done
2521
2522    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2523   
2524    # Copy of files mandatory for ssh to automate mount if sshfs is used
2525    mkdir $mountpoint/.ssh $mountpoint/tmp
2526    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2527    cat > $mountpoint/tmp/myssh << EOF
2528ssh -o StrictHostKeyChecking=no $*
2529EOF
2530    chmod 755 $mountpoint/tmp/myssh
2531
2532    # Copy of files mandatory for ld.so
2533    cp -a /etc/ld.so.c* $mountpoint/etc
2534
2535    # Handle the case where busybox and mount are dynamically linked
2536    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2537    if [ $? -eq 0 ]; then
2538        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2539        rm -f bin/mount
2540    fi
2541
2542    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2543    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2544    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2545        if [ -r $f ]; then
2546            echo $f >> $MINDI_TMP/minimal.lis
2547            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2548        fi
2549    done
2550    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2551        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2552    done
2553    # Initial / are trucated by tar
2554    finallist=""
2555    # Remove directories from the list, as tar/cp will create them anyway
2556    # and it may hurt if /lib is in it as on Debian/Ubuntu
2557    # recent bash says that -d is true for a link to a dir !
2558    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2559        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2560            finallist="$finallist $f"
2561        fi
2562    done
2563    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2564    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2565    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2566
2567    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2568    ln -sf /bin/bash bin/sh
2569    LogIt "INFO: Using bash as default shell"
2570    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2571
2572    # Avoids an issue on some distro (RHEL5)
2573    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2574
2575    mkdir -p $mountpoint/tmp
2576    # Management of udev (which includes modprobe in rules)
2577    ps auxww | grep -v grep | grep -qw udevd
2578    if [ $? -eq 0 ]; then
2579        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2580        LogIt "INFO: udev device manager found"
2581        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2582        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2583        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2584        # Do not do it if it's a link (Ubuntu 64 bits #503)
2585        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2586            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2587        fi
2588        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2589            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2590        fi
2591        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2592            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2593        fi
2594        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2595            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2596        fi
2597        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2598            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2599            lis=""
2600            # Get only the files which exist in that list
2601            # and potentially their symlink structure
2602            for i in $lis2; do
2603                if [ -h $i ]; then
2604                    j=$i
2605                    while [ -h $j ]; do
2606                        lis="$lis $j"
2607                        j=`readlink -f $j`
2608                    done
2609                    lis="$lis $j"
2610                elif [ -f $i ]; then
2611                    lis="$lis $i"
2612                fi
2613            done
2614            # And their deps
2615            LocateDeps $lis > $MINDI_TMP/udev.lis
2616            for i in $lis; do
2617                if [ "`echo $i | cut -c1`" = "/" ]; then
2618                    j=`echo $i | cut -c2-`
2619                    [ "$j" != "" ] && rm -f $j
2620                fi
2621                echo "$i" >> $MINDI_TMP/udev.lis
2622            done
2623            finallist=""
2624            # Remove directories from the list, as tar/cp will create them anyway
2625            # and it may hurt if /lib is in it as on Debian/Ubuntu
2626            # recent bash says that -d is true for a link to a dir !
2627            for f in `sort -u $MINDI_TMP/udev.lis`; do
2628                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2629                    finallist="$finallist $f"
2630                fi
2631            done
2632            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2633            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2634            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2635            rm -f $MINDI_TMP/udev.lis
2636        else
2637            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2638            LogAll "         mindi will use static devices which may cause problems"
2639            rm -f $mountpoint/tmp/USE-UDEV
2640        fi
2641    fi
2642
2643    # Management of potential HW info (ProLiant only at the moment)
2644    rm -rf $MINDI_CACHE/bkphw
2645    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2646    if [ -d $MINDI_CACHE/bkphw ]; then
2647        LogIt "INFO: Hardware Information found and saved ..."
2648        cp -rp $MINDI_CACHE/bkphw .
2649        if [ -f $MINDI_CACHE/tools.files ]; then
2650            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2651            LocateDeps $lis > $MINDI_TMP/tools.lis
2652            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2653        fi
2654        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2655            mv -f $MINDI_CACHE/mindi-rsthw .
2656            chmod 755 ./mindi-rsthw
2657        fi
2658        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2659    fi
2660
2661    # Management of perl scripts delivered needed at restore time
2662    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2663    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2664
2665    for w in cdrom groovy-stuff ; do
2666        mkdir -p mnt/$w
2667    done
2668
2669    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2670
2671    echo -en "..."
2672    cd /
2673
2674    needed_modules=""
2675    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2676
2677    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2678        # For PXE boot
2679        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2680    fi
2681    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2682        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2683    fi
2684    for i in $DENY_MODS; do
2685        LogFile "INFO: Removing $i from the list of modules to load"
2686        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2687    done
2688
2689    if [ "${kernelname}" != "" ]; then
2690        needed_modules_path=lib/modules/${kernelname}
2691        mkgmopt="-k ${kernelname}"
2692    else
2693        needed_modules_path=lib/modules/$KERVERRUN
2694        mkgmopt="-k $KERVERRUN"
2695    fi
2696
2697    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2698    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2699
2700    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2701    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2702
2703    # Uncompress modules if not using udev and native modprobe
2704    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2705        for i in $needed_modules; do
2706            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2707                gunzip -f $mountpoint/$i
2708            fi
2709            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2710                bunzip2 -f $mountpoint/$i
2711            fi
2712            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2713                unxz -f $mountpoint/$i
2714            fi
2715            LogFile "INFO: Uncompressing $i"
2716        done
2717    fi
2718
2719    # Also copy modules.* in case of udev so that normal modprobe works
2720    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2721
2722    # Copy FW in case some drivers needs it
2723    for d in "/lib" "/usr/lib"; do
2724        if [ -d "$d/firmware" -a ! -h $d ]; then
2725            cp -a "$d/firmware" "$mountpoint/$d"
2726        fi
2727    done
2728
2729    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2730    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2731        if [ -d "$d/multipath" -a ! -h $d ]; then
2732            cp -a "$d/multipath" "$mountpoint/$d"
2733        fi
2734    done
2735
2736    # Copy an additional ProLiant tool for OBDR support
2737    if [ -f $MINDI_TMP/OBDR ]; then
2738        found=0
2739        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2740            mkdir -p $mountpoint/usr/bin
2741            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2742            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2743            found=1
2744        fi
2745        if [ -x /usr/bin/sg_wr_mode ]; then
2746            mkdir -p $mountpoint/usr/bin
2747            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2748            LocateDeps $lis > $MINDI_TMP/obdr.lis
2749            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2750            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2751            found=1
2752        fi
2753        if [ $found -eq 0 ]; then
2754            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2755            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2756        fi
2757    fi
2758
2759    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2760        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2761        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2762        rm -f $mountpoint/sbin/devfsd
2763    fi
2764    cd "$old_pwd"
2765    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2766    if [ _"$MONDO_SHARE" != _"" ]; then
2767        MakeMondoConfigFile $mountpoint/tmp/mondorestore.cfg
2768        cp -f $mountpoint/tmp/mondorestore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondorestore.cfg to ramdisk"
2769        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2770        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2771        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2772        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2773        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2774        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2775        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2776    fi
2777    mkdir -p $mountpoint/proc
2778    LogFile "---------------------------"
2779    LogFile "Content of initial ramdisk:"
2780    LogFile "---------------------------"
2781    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2782    LogFile "---------------------------"
2783
2784    # Determine what filesystem to use for initrd image
2785    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2786    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2787    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2788    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2789        # say what will be used
2790        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2791        # kernel expects linuxrc in ext2 filesystem
2792        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2793        # unmount loop filesystem and create image file using the standard approach
2794        umount $mountpoint || Die "Cannot unmount $tempfile"
2795        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2796        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2797            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2798        else
2799            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2800        fi
2801        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2802        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2803        rm -f ${rdz_fname}.tmp
2804        # log that we are done
2805        LogFile "      ...done."
2806    elif [ "$gvFileSystem" = "initramfs" ]; then
2807        # say what will be used
2808        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2809        # make sure that cpio is there
2810        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2811        # go into filesystem
2812        cd "$mountpoint"
2813        # kernel expects init in cpio filesystem
2814        ln -sf sbin/init init
2815        # create cpio image file and unmount loop filesystem
2816        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2817        cd "$old_pwd"
2818        umount $mountpoint || Die "Cannot unmount $tempfile"
2819        # log that we are done
2820        LogFile "      ...done."
2821    else
2822        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2823    fi
2824
2825    if [ "$res" -eq "0" ] ; then
2826        echo -en "..."
2827    else
2828        echo -en "\rMade an rdz WITH ERRORS.           \n"
2829    fi
2830    return 0
2831}
2832
2833
2834##############################################################################
2835#----------------------------------- Main -----------------------------------#
2836##############################################################################
2837
2838# Now we can create what we need
2839mkdir -p $MINDI_TMP
2840
2841# Purge from potential old run
2842if [ _"$MINDI_CACHE" = _"" ]; then
2843    Die "MINDI_CACHE undefined"
2844fi
2845
2846# --nolog needs to be first, and is used in analyze-my-lvm
2847if [ "$1" = "--nolog" ] ; then
2848    shift
2849    LOGFILE=/dev/stderr
2850else
2851    > $LOGFILE
2852fi
2853if [ "$1" = "--printvar" ] ; then
2854    shift
2855    if [ _"$1" != _"" ] ; then
2856        set | grep -Ew "^$1" | cut -d= -f2
2857    fi
2858    exit 0
2859fi
2860
2861LogFile "mindi v$MINDI_VERSION"
2862LogFile "$ARCH architecture detected"
2863LogFile "mindi called with the following arguments:"
2864echo "$@">> $LOGFILE
2865LogFile "Start date : `date`"
2866LogFile "-----------------------------"
2867
2868[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2869
2870# Log some capital variables
2871[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2872[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2873LogFile "MONDO_SHARE = $MONDO_SHARE"
2874LogFile "MINDI_LIB = $MINDI_LIB"
2875LogFile "MINDI_SBIN = $MINDI_SBIN"
2876LogFile "MINDI_CONF = $MINDI_CONF"
2877if [ -f $MINDI_CONFIG ]; then
2878    LogFile "-----------------------------"
2879    LogFile " Mindi configuration file    "
2880    LogFile "-----------------------------"
2881    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2882    LogFile "-----------------------------"
2883fi
2884LogFile "In Mindi"
2885LogFile "--------"
2886LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2887LogFile "BOOT_SIZE = $BOOT_SIZE"
2888LogFile "--------"
2889
2890trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2891
2892# Sanity checks
2893which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2894which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2895which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2896which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2897if which awk &> /dev/null ; then
2898    if ! which gawk &> /dev/null ; then
2899        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2900    fi
2901fi
2902which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2903[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2904
2905[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2906
2907# Update the PATH variable if incomplete
2908if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2909    PATH=$PATH:/sbin:/usr/sbin
2910    export PATH
2911    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2912    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2913    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2914fi
2915
2916if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2917    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2918fi
2919
2920### TODO
2921### Fix as it's not mandatory on ia64
2922if [ "$ARCH" = "ia64" ] ; then
2923    if which elilo &> /dev/null ; then
2924        LILO_EXE=elilo
2925    else
2926        LILO_EXE=`which false 2> /dev/null`
2927    fi
2928else
2929    FindIsolinuxBinary
2930fi
2931trap "Aborted" SIGTERM
2932DONE="\r\t\t\t\t\t\t\t\tDone.         "
2933kernelpath=""
2934MONDO_ROOT=/var/cache/mondo
2935mkdir -p $MONDO_ROOT
2936
2937if [ -d "/proc/lvm" ]; then
2938    # LVM v1
2939    LVMCMD=""
2940    LVM="v1"
2941elif [ -d "/dev/mapper" ]; then
2942    # LVM v2
2943    LVMCMD="lvm"
2944    LVM="v2"
2945else
2946    LVM="false"
2947fi
2948
2949if [ -e "/proc/cmdline" ]; then
2950    CMDLINE="/proc/cmdline"
2951elif [ -e "/tmp/cmdline" ]; then
2952    CMDLINE="/tmp/cmdline"
2953else
2954    CMDLINE="/dev/null"
2955fi
2956
2957LogFile "INFO: LVM set to $LVM"
2958LogFile "----------"
2959LogFile "mount result:"
2960LogFile "-------------"
2961mount >> $LOGFILE
2962if [ -e /etc/raidtab ]; then
2963    LogFile "-------------"
2964    LogFile "/etc/raidtab content:"
2965    LogFile "-------------"
2966    cat /etc/raidtab >> $LOGFILE
2967else
2968    LogFile "No file /etc/raidtab"
2969fi
2970if [ -e /etc/mdadm.conf ]; then
2971    LogFile "-------------"
2972    LogFile "/etc/mdadm.conf content:"
2973    LogFile "-------------"
2974    cat /etc/mdadm.conf >> $LOGFILE
2975else
2976    LogFile "-------------"
2977    LogFile "No file /etc/mdadm.conf"
2978fi
2979LogFile "-------------"
2980LogFile "cat $CMDLINE"
2981LogFile "-------------"
2982cat $CMDLINE >> $LOGFILE
2983LogFile "-------------"
2984LogFile "cat /proc/swaps:"
2985LogFile "-------------"
2986cat /proc/swaps >> $LOGFILE
2987LogFile "-------------"
2988if [ -e /proc/mdstat ]; then
2989    LogFile "cat /proc/mdstat:"
2990    LogFile "-------------"
2991    cat /proc/mdstat >> $LOGFILE
2992else
2993    LogFile "No pseudo file /proc/mdstat"
2994fi
2995LogFile "-------------"
2996LogFile "cat /proc/partitions:"
2997LogFile "-------------"
2998cat /proc/partitions >> $LOGFILE
2999LogFile "-------------"
3000LogFile "cat /proc/filesystems:"
3001LogFile "-------------"
3002cat /proc/filesystems >> $LOGFILE
3003LogFile "-------------"
3004LogFile "lsmod result:"
3005LogFile "-------------"
3006lsmod >> $LOGFILE
3007MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3008if [ -x /usr/sbin/esxcfg-module ]; then
3009    LogFile "-------------"
3010    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3011    LogFile "-------------"
3012    LogFile "VMWare modules"
3013    LogFile "-------------"
3014    /usr/sbin/esxcfg-module -l >> $LOGFILE
3015    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3016fi
3017LogFile "-------------" 
3018LogFile "FORCE_MODS:"
3019LogFile "-------------"
3020LogFile "$FORCE_MODS"
3021LogFile "-------------"
3022LogFile "DENY_MODS:"
3023LogFile "-------------"
3024LogFile "$DENY_MODS"
3025LogFile "-------------"
3026LogFile "df result:"
3027LogFile "----------"
3028df -aT >> $LOGFILE
3029LogFile "-------------"
3030LogFile "df -i result:"
3031LogFile "----------"
3032df -i >> $LOGFILE
3033LogFile "-------------"
3034if [ -r /boot/grub/menu.lst ]; then
3035    LogFile "-------------"
3036    LogFile "INFO: /boot/grub/menu.lst content"
3037    LogFile "-------------"
3038    cat /boot/grub/menu.lst >> $LOGFILE
3039    LogFile "-------------"
3040fi
3041if [ -r /boot/grub/grub.conf ]; then
3042    LogFile "-------------"
3043    LogFile "INFO: /boot/grub/grub.conf content"
3044    LogFile "-------------"
3045    cat /boot/grub/grub.conf >> $LOGFILE
3046    LogFile "-------------"
3047fi
3048if [ -r /boot/grub/grub.cfg ]; then
3049    LogFile "-------------"
3050    LogFile "INFO: /boot/grub/grub.cfg content"
3051    LogFile "-------------"
3052    cat /boot/grub/grub.cfg >> $LOGFILE
3053    LogFile "-------------"
3054fi
3055if [ -r /boot/grub/device.map ]; then
3056    LogFile "-------------"
3057    LogFile "INFO: /boot/grub/device.map content"
3058    LogFile "-------------"
3059    cat /boot/grub/device.map >> $LOGFILE
3060    LogFile "-------------"
3061fi
3062if [ -r /etc/lilo.conf ]; then
3063    LogFile "-------------"
3064    LogFile "INFO: /etc/lilo.conf content"
3065    LogFile "-------------"
3066    cat /etc/lilo.conf >> $LOGFILE
3067fi
3068LogFile "Full fdisk info"
3069LogFile "---------------"
3070$FDISK -l >> $LOGFILE
3071LogFile "----------------"
3072LogFile "List of extra modules is:"
3073LogFile "$EXTRA_MODS"
3074LogFile "-------------"
3075
3076# Compute libata version
3077laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3078# If libata v2 is used then remove ide-generic as it will perturbate boot
3079if [ "`echo $MODULES | grep libata`" ]; then
3080    if [ "$laver" = "2" ]; then
3081        DENY_MODS="$DENY_MODS ide-generic"
3082        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3083        LogFile "-------------"
3084    fi
3085fi
3086
3087# Check for McAfee which disturbs the access to some files (tgz in articular)
3088if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3089    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3090    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3091    LogFile "WARNING: You have two options:"
3092    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3093    LogFile "WARNING:  - Disable the scanner during the backup"
3094fi
3095
3096# Check for ISO_CMD command
3097if [ ! -x $ISO_CMD ]; then
3098    LogFile "NOTE: No CD image (ISO file) utility found"
3099fi
3100
3101FLOPPY_WAS_MOUNTED=""
3102for mtpt in /media/floppy /mnt/floppy /floppy ; do
3103    if mount | grep -w $mtpt &> /dev/null ; then
3104        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3105        umount $mtpt
3106    fi
3107done
3108
3109#
3110# If we have a USB device we need to store info
3111# and remove it from the parameters line
3112#
3113if [ "$#" -ne "0" ] ; then
3114    if [ "$1" = "--usb" ] ; then
3115        shift
3116        USBDEVICE=$1
3117        if [ _"$USBDEVICE" = _"" ]; then
3118            Die "No USB device specified"
3119        fi
3120        shift
3121    fi
3122fi
3123
3124if [ "$#" -ne "0" ] ; then
3125    if [ "$1" = "--findkernel" ] ; then
3126        resk=`TryToFindKernelPath`
3127        # Avoids logfile content for mondo
3128        export MONDO_SHARE=""
3129        if [ "$resk" = "" ] ; then
3130            if [ $KERNEL_IS_XEN = "yes" ]; then
3131                echo "$xenkernelpath"
3132                LogFile "INFO: xenkernelpath = $xenkernelpath"
3133                MindiExit 0
3134            else
3135                MindiExit -1
3136            fi
3137        else
3138            echo "$resk"
3139            LogFile "INFO: kernelpath = $resk"
3140            MindiExit 0
3141        fi
3142    elif [ "$1" = "--locatedeps" ] ; then
3143        [ ! "$2" ] && Die "Please specify the binary to look at"
3144        LocateDeps $*
3145        # Avoids logfile content for mondo
3146        export MONDO_SHARE=""
3147        MindiExit $?
3148    elif [ "$1" = "--readalllink" ] ; then
3149        [ ! "$2" ] && Die "Please specify the binary to look at"
3150        # Avoids logfile content for mondo
3151        export MONDO_SHARE=""
3152        mr-read-all-link $2
3153        MindiExit $?
3154    elif [ "$1" = "--makemessage" ] ; then
3155        MakeMessageFile | cut -c1-80
3156        MindiExit 0
3157    elif [ "$1" = "--makemountlist" ] ; then
3158        [ ! "$2" ] && Die "Please specify the output file"
3159        MakeMountlist $2
3160        CheckMountlist $2
3161        # Avoids logfile content for mondo
3162        export MONDO_SHARE=""
3163        MindiExit $?
3164    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3165        echo "Mindi v$MINDI_VERSION"
3166        # Avoids logfile content for mondo
3167        export MONDO_SHARE=""
3168        MindiExit 0
3169    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3170        MONDO_TMP=$2
3171        # Change MINDI_TMP for the one provided by mondo
3172        # So that it can get back the built files
3173        if [ _"$MONDO_TMP" = _"" ]; then
3174            Die "MONDO_TMP is empty, aborting"
3175        fi
3176        if [ _"$MONDO_TMP" = _"/" ]; then
3177            Die "MONDO_TMP is /, aborting"
3178        fi
3179        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3180        rmdir $MINDI_TMP
3181        export MINDI_TMP=$MONDO_TMP
3182        mkdir -p $MINDI_TMP
3183
3184        # This is the scratch dir in mondo - subdir images
3185        MINDI_CACHE=$3
3186
3187        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3188        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3189       
3190###
3191### Sq-Modification...
3192### Attempt to locate kernel specific module path
3193### if module path is found then use it other wise use uname -r to set it...
3194###
3195        if [ $KERNEL_IS_XEN = "yes" ]; then
3196            LogAll "INFO: xenkernelpath = $xenkernelpath"
3197        fi
3198        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3199        if [ ! -d "/lib/modules/$kernelname" ]; then
3200           LogAll "WARNING: Module path for ${kernelpath} not found..."
3201           LogAll "         using running kernel\'s modules."
3202           kernelname=$KERVERRUN
3203        else
3204           LogAll "Using modules for kernel: ${kernelname}"
3205        fi
3206        LogAll "INFO: kernelname = $kernelname"
3207        LogAll "INFO: kernelpath = $kernelpath"
3208###
3209### end of Sq-Modification
3210###
3211        TAPEDEV=$5
3212        TAPESIZE=$6
3213        FILES_IN_FILELIST=$7
3214        USE_LZO=$8
3215        CDRECOVERY=$9
3216        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3217            IMAGE_DEVS=""
3218        else
3219            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3220        fi
3221        if [ "${11}" ] ; then
3222            LILO_OPTIONS=""
3223    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3224        fi
3225        LAST_FILELIST_NUMBER=${12}
3226        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3227        export MINDI_EXCLUDE_DEVS="${14}"
3228        USE_COMP="${15}"
3229        USE_LILO="${16}"
3230        USE_STAR="${17}"
3231        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3232        DIFFERENTIAL="${19}"
3233        USE_GZIP="${20}"
3234        NOT_BOOT="${21}"
3235        [ "$USE_COMP" = "" ] && USE_COMP=yes
3236        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3237        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3238        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3239        # MONDO_ROOT is the real scratchdir
3240        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3241        if [ _"$MONDO_ROOT" != _"" ]; then
3242            mkdir -p $MONDO_ROOT
3243        else
3244            Die "MONDO_ROOT is undefined"
3245        fi
3246    else
3247        LogScreen "Syntax: mindi (--custom ....)"
3248        MindiExit -1
3249    fi
3250fi
3251
3252if [ _"$MINDI_CACHE" != _"" ]; then
3253    rm -rf $MINDI_CACHE/* 2> /dev/null
3254    mkdir -p $MINDI_CACHE
3255fi
3256
3257[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3258
3259if [ _"$MONDO_SHARE" = _"" ]; then
3260    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3261    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3262    LogIt "BusyBox sources are available from http://www.busybox.net"
3263    LogIt "------------------------------------------------------------------------------"
3264else
3265    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3266fi
3267if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3268    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3269else
3270    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3271    MindiExit -1
3272fi
3273
3274for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3275    modinfo $i 2> /dev/null 1> /dev/null
3276    if [ $? -eq 0 ]; then
3277        modprobe $i 2>&1 > /dev/null
3278    fi
3279done
3280
3281KERN_DISK_MADE=""
3282
3283LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3284LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3285LogFile "NOT_BOOT = '$NOT_BOOT'"
3286if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3287    LogIt "INFO: Just creating mondorestore.cfg and a small all.tar.gz for Mondo. Nothing else."
3288    MakeMondoConfigFile $MINDI_TMP/mondorestore.cfg
3289    MakeMountlist $MINDI_TMP/mountlist.txt
3290    CheckMountlist $MINDI_TMP/mountlist.txt
3291    mkdir -p $MINDI_TMP/small-all/tmp
3292    cd "$MINDI_TMP/small-all"
3293    cp -f $MINDI_TMP/{mountlist.txt,mondorestore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3294    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3295    sleep 2
3296    LogIt "Done. Exiting."
3297    MindiExit 0
3298fi
3299
3300if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3301    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3302fi
3303
3304if [ "$kernelpath" = "" ] ; then
3305    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3306    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3307    read ch
3308    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3309        USE_OWN_KERNEL="yes"
3310    else
3311        USE_OWN_KERNEL="no"
3312    fi
3313    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3314        kernelpath=`TryToFindKernelPath`
3315        if [ "$kernelpath" = "" ] ; then
3316            echo -n "Please enter kernel path : "
3317            read kernelpath
3318        fi
3319    fi
3320fi
3321
3322echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3323[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3324
3325mountpoint=$MINDI_TMP/mountpoint.$$
3326PrepareDataDiskImages
3327
3328ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3329rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3330export ramdisk_size=$rds
3331
3332LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3333if [ "$ARCH" = "ia64" ] ; then
3334    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3335else
3336    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3337fi
3338
3339[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3340...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3341
3342if [ _"$MONDO_SHARE" = _"" ]; then
3343    ListImagesForUser
3344    OfferToMakeBootableISO
3345    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3346        OfferToMakeBootableUSB
3347    fi
3348    LogAll "Finished."
3349elif [ "$TAPEDEV" ] ; then
3350    if [ "$ARCH" != "ia64" ] ; then
3351        # We need to keep the img file as boot file for ia64 platform
3352        rm -f $MINDI_CACHE/{*img,*iso}
3353    else
3354        rm -f $MINDI_CACHE/*iso
3355    fi
3356    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3357        OfferToMakeBootableUSB
3358    fi
3359    OfferToMakeBootableISO
3360    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3361        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3362    else
3363        Die "Cannot find all.tar.gz, to be written to tape"
3364    fi
3365elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3366    OfferToMakeBootableUSB
3367else
3368    OfferToMakeBootableISO
3369fi
3370# cleanup
3371LogAll "INFO: $FRIENDLY_OUTSTRING"
3372for mtpt in $FLOPPY_WAS_MOUNTED ; do
3373    mount $mtpt
3374done
3375MindiExit 0
Note: See TracBrowser for help on using the repository browser.