source: MondoRescue/branches/3.2/mindi/mindi @ 3261

Last change on this file since 3261 was 3261, checked in by Bruno Cornec, 7 years ago
  • Remove now unneeded modules from net module list
  • Fix perl usage typos
  • Fix some error msgs
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.1 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3261 2014-03-30 02:18:24Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/vconsole.conf" ] ; then
391        LogFile "INFO: New Fedora style config detected."
392        keyfile=/etc/vconsole.conf
393    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
394        LogFile "INFO: Slackware-style config detected."
395        keyfile=/etc/rc.d/rc.keymap
396    elif [ -e "/etc/rc.config" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        keyfile=/etc/rc.config
399    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
400        LogFile "INFO: Debian-style config detected."
401        mkdir -p $bigdir/tmp
402        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
403        KBDEPTH=0
404        mkdir -p $bigdir/etc/console
405        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
406        echo ""
407        echo -e "$DONE"
408        return 0
409    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
410        LogFile "INFO: Ubuntu-style config detected."
411        mkdir -p $bigdir/tmp
412        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
413            kbdfile="/etc/console-setup/boottime.kmap.gz"
414        else
415            kbdfile="/etc/console-setup/cached.kmap.gz"
416        fi
417        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
418        KBDEPTH=0
419        mkdir -p $bigdir/etc/console-setup
420        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
421        echo ""
422        echo -e "$DONE"
423        return 0
424    elif [ -e "/etc/rc.conf" ] ; then
425        LogFile "INFO: ArchLinux config detected."
426        keyfile=/etc/rc.conf
427    elif [ -e "/etc/conf.d/keymaps" ] ; then
428        LogFile "INFO: Gentoo-style config detected."
429        keyfile=/etc/conf.d/keymaps
430    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
431        LogFile "INFO: X11-style config detected."
432        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
433    else
434        LogFile "Searching for rc.config ..."
435        keyfile=`find /etc -name rc.config | head -n1`
436        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
437            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
438            return
439        else
440            LogFile "INFO: Found $keyfile"
441        fi
442    fi
443    if [ ! -e "$KEYDIR/keymaps" ] ; then
444        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
445        return
446    fi
447    LogFile "INFO: keyfile=$keyfile"
448    # For SLES we need to remove the .map.gz extension Cf #614
449    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
450    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
451    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
452    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
453    LogFile "INFO: locale=$locale"
454    #
455    # Process the keymaps dir once for all
456    # AddKeyboardMappingFile will use it recursively
457    #
458    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
459    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
460    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
461    # If we have multiple keymaps then log it !!
462    echo "$mp" | grep -q " " >> $LOGFILE
463    if [ $? -eq 0 ]; then
464        LogAll "WARNING: Multiple keymaps found: $mp"
465        LogFile "INFO: The following one will be used"
466    fi
467    for i in $mp ; do
468        mappath=$i
469        [ -e "$i" ] && [ ! -d "$i" ] && break
470    done
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
473    fi
474    LogFile "INFO: mappath = $mappath"
475    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
476        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
477        return
478    fi
479    LogAll "INFO: Adding the following keyboard mapping tables: "
480    mkdir -p $bigdir/tmp
481    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
482    KBDEPTH=0
483    AddKeyboardMappingFile $mappath
484    echo ""
485    echo -e "$DONE"
486    rm -f $MINDI_TMP/keymaps.find
487    return 0
488}
489
490
491FindLdlinux32Binary() {
492    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
496    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
497    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
498    if [ ! -e "$LDLINUXC32" ]; then 
499        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
500        LDLINUXC32=/tmp/idoesnthopefullyexist
501    else
502        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
503    fi
504}
505
506
507FindMboot32Binary() {
508    MBOOTC32=/usr/lib/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
514    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
515    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
516}
517
518FindIsolinuxBinary() {
519    ISOLINUX=/usr/lib/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
526    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
527    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
528}
529
530
531GenerateGiantDependencyList() {
532    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
533
534    echo -en "Analyzing dependency requirements"
535    outfile=$1
536    tempfile=$MINDI_TMP/$$.txt
537    incoming=`ReadLine`
538
539    > $tempfile
540    progress=0
541    res=0
542    noof_lines=$2
543    while [ "$incoming" != "" ] ; do
544        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
545            incoming=`ReadLine`
546            continue
547        fi
548        if [ "$incoming" = "LVMFILES:" ] ; then
549            break
550        fi
551        filelist=`GenerateListForFile "$incoming"`
552        r=$?
553        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
554        res=$(($res+$r))
555#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
556        for fname in $filelist ; do
557                [ "$fname" != "" ] && echo "$fname" >> $tempfile
558        done
559        progress=$(($progress+1))
560        LogProgress $progress $noof_lines
561        incoming=`ReadLine`
562    done
563    if  [ "$incoming" = "LVMFILES:" ] ; then
564        incoming=`ReadLine`
565        lvmversion=""
566        while [ "$incoming" != "" ] ; do
567            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
568                incoming=`ReadLine`
569                continue
570            fi
571            filelist=`GenerateListForFile "$incoming"`
572            for tool in $filelist ; do
573                lvmresolved=`readlink -f $tool`
574                if [ "$tool" = "$lvmresolved" ]; then
575                    echo "$tool" >> $tempfile
576                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
577                    if [ "$lvmversion" = "" ] ; then
578                        lvmversion=`$lvmresolved`
579                        echo "$lvmresolved" >> $tempfile
580                    fi
581                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
582                    if [ "$lvmversion" = "200" ]; then
583                        # pvdata and lvmcreate_initrd don't exist in LVM2
584                        case "$toolstripped" in
585                        "pvdata")
586                            continue
587                            ;;
588                        "lvmcreate_initrd")
589                            continue
590                            ;;
591                        esac
592                    fi
593                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
594                    if [ -e "$toolpath" ] ; then
595                        echo "$toolpath" >> $tempfile
596                        echo "$tool" >> $tempfile
597                    else
598                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
599                    fi
600                    if [ -e "$toolpath" ] ; then
601                        echo "$toolpath" >> $tempfile
602                        echo "$tool" >> $tempfile
603                    else
604                        echo "Where are your LVM-Tools? Couldn't find $tool"
605                    fi
606                else
607                    echo "$tool" >> $tempfile
608                fi
609            done
610            progress=$(($progress+1))
611            LogProgress $progress $noof_lines
612            incoming=`ReadLine`
613        done
614    fi
615    echo -en "$DONE\nMaking complete dependency list"
616
617    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
618    mv -f $tempfile.new $tempfile
619    > $outfile.pre
620    progress=0
621    noof_lines=`cat $tempfile | wc -l`
622    LogFile "---------------------------------"
623    LogFile "List of dependencies:             "
624    LogFile "---------------------------------"
625    for fname in `cat $tempfile` ; do
626        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
627        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
628        progress=$(($progress+1))
629        LogProgress $progress $noof_lines
630    done
631    if [ _"$MONDO_SHARE" != _"" ]; then
632        mkdir -p $bigdir/tmp
633        mkdir -p $bigdir/usr/bin
634        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
635            LogAll "\nINFO: Incorporating post-nuke tarball"
636            old_pwd=`pwd`
637            cd "$bigdir"
638            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
639            cd "$old_pwd"
640        fi
641        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
642            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
643        else
644            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
645            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
646            LogIt "       If Mindi was called by Mondo then send me a bug report."
647            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
648            LogIt "       Finally, run Mindi again."
649            Die "Odd."
650        fi
651        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
652        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
653            LogAll "\nINFO: Incorporating Network-related settings"
654            for r in NETFS-* ISO-PREFIX ; do
655                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
656                LogFile "INFO: Copying $r to ramdisk"
657            done
658        fi
659    fi
660    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
661    rm -f $tempfile $outfile.pre
662    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
663    return $res
664}
665
666
667GenerateListForFile() {
668    local files_found loc fname incoming i res
669    incoming="$1"
670    files_found=""
671    res=0
672
673    for fname in $incoming ; do
674        files_found="$files_found `LocateFile $fname`"
675    done
676
677    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
678}
679
680
681# Returns all disk devices which are part of a raid array
682GetAllRaidMembers() {
683    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
684}
685
686
687GetFileSizeList() {
688    local i
689    for i in `find $1 -type d -o -print` ; do
690        du -sk $i
691    done
692}
693
694
695# Check kernel filesystem capabilites for accessing initrd image
696# Could be ext2 FS (old mode) or initramfs (new mode)
697#
698# Interface definition:
699# param #1: absolute path to kernel image
700GetInitrdFilesystemToUse() {
701
702    # interface test: make sure we have one parameter
703    if [ $# -ne 1 ]; then
704        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
705    fi
706
707    # interface parameters
708    local lvKernelImage=$1
709
710    # local constants (filesystem magic strings)
711    local lcMagicCramfs="<3>cramfs: wrong magic"
712    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
713    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
714    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
715
716    # local variables
717    local lvOffset
718    local lvScanRes
719    local lvUseFilesystem
720
721    # say where we are.
722    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
723
724    # verify that file exists
725    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
726
727    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
728    file $lvKernelImage 2>&1 | grep -q gzip
729    if [ $? -eq 0 ]; then
730        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
731        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
732    else
733        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
734        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
735        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
736        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
737        if [ $lvOffset -eq 0 ]; then
738            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
739            lvScanRes=$lcMagicInitfs
740        else
741            lvOffset=`expr $lvOffset / 2`
742            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
743            # scan again  kernel image
744            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
745        fi
746    fi
747
748    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
749    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
750        lvUseFilesystem="ext2fs"
751    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
752        lvUseFilesystem="ext3fs"
753    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
754        lvUseFilesystem="initramfs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
756        lvUseFilesystem="cramfs"
757    else
758        # In that case, we are most probably after 2.6.30 and use the supported initramfs
759        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
760        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
761        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
762        lvUseFilesystem="initramfs"
763    fi
764
765    # say what we are using
766    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
767
768    # return file system to use
769    echo "$lvUseFilesystem"
770
771}
772
773# Searches members of raid device
774# $1: raid device (/dev/md...)
775GetRaidDevMembers() {
776    if [ ! -f /etc/raidtab ]; then 
777        return
778    fi
779    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
780}
781
782
783ListAllPartitions() {
784    local res currline partition all_partitions ap_orig remaining i j
785
786    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
787    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
788    if [ -e "/vmfs/volumes" ]; then
789        # For VMWare ESX 3 get the device names of these volumes
790        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
791    fi
792    return
793}
794
795
796ListImagesForUser() {
797    local path fname
798    path=$MINDI_CACHE
799    echo -en "In the directory '$path' you will find the images:-\n"
800    for fname in `ls $path | grep -F mindi-` ; do
801        printf "%19s " $fname
802    done
803    echo " "
804}
805
806
807ListKernelModulePaths() {
808    local module_list module fname r kern
809    module_list="$MODULES"
810    # Remove unwanted modules from list
811    for i in $DENY_MODS; do
812        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
813        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
814    done
815###
816### Sq-Modification ... Use kernelname for module search path if specified
817###
818    if [ "${kernelname}" != "" ]
819    then
820        kern=${kernelname}
821    else
822        kern="$KERVERRUN"
823    fi
824    export KERVER=$kern
825###
826### Sq-Mod End
827###
828    # Get rid of duplicates, so that if a live kernel module also appears
829    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
830    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
831        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
832        if [ -z "$r" ]; then
833            if [ "`echo "$MODULES" | grep -w $module`" ]; then
834                r="[live module file not found]"
835            else
836                r="[extra module file not found]"
837            fi
838        else
839            [ -f "$r" ] && echo "$r"
840        fi
841        LogFile "INFO: module $module --> $r"
842    done
843    find /lib/modules/$kern/modules.* -type f 2> /dev/null
844}
845
846#
847# Critical function which computes all dependencies (dyn. lib.)
848# for a list of binaries
849#
850LocateDeps() {
851    local incoming fname deps
852    incoming="$*"
853    deps=""
854
855    for fname in $incoming ; do
856        if [ ! -e "$fname" ] ; then
857            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
858            if echo $fname | grep lvm &> /dev/null ; then
859                LogFile "          This warning only affects you if you are using LVM."
860                if echo "$MODULES" | grep lvm &> /dev/null ; then
861                    LogFile "          I think you are, so please take heed!"
862                else
863                    LogFile "          I don't think you are, so don't worry about it."
864                fi
865            fi
866        else
867            deps="$deps $fname" 
868        fi
869    done
870    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
871}
872
873
874# Give all symlinks recursively of a full path name
875ReadAllLink() {
876    file="$1"
877
878    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
879        # We need to normalise the path with .. in it
880        file=`echo $file | perl -p -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
881    done
882    echo "$file"
883    if [ ! -h $file ]; then
884        return 0
885    fi
886
887    link=`readlink $file`
888    d=`dirname $file`
889    # Is link a relative or full path name
890    fchar=`echo $link | cut -c1`
891    # If mother dir is a link print it
892    if [ -h "$d" ]; then
893        echo "$d"
894        d2=`readlink $d`
895        c2=`echo $d2 | cut -c1`
896        if [ "$c2" != "/" ]; then
897            if [ "$c2" != "." ]; then
898                d="/$d2"
899            else
900                d="$d/$d2"
901            fi
902        fi
903        echo "$d/`basename $file`"
904    fi
905    if [ "$fchar" != "/" ]; then
906        # Relative or local link
907        ReadAllLink "$d/$link" 
908    else
909        # Absolute path
910        ReadAllLink $link 
911    fi
912}
913
914
915LocateFile() {
916    local i j path fname_to_find location output resolved tmp stub cache_id loclist
917    fname_to_find="$1"
918    # It's an absolute path
919    j=`echo "$fname_to_find" | cut -c1`
920    if [ _"$j" = _"/" ]; then
921        dn=`dirname $fname_to_find`
922        # We suppose that the link is already included, just add the new file
923        if [ -h "$dn" ]; then
924            newdn=`readlink -f $dn`
925            bn=`basename $fname_to_find`
926            output="$newdn/$bn"
927        else
928            output="$fname_to_find"
929        fi
930        if [ -h "$output" ] ; then
931            output="`mr-read-all-link $output` $output"
932        fi
933        echo "$output"
934        return 0
935    fi
936    # It's not an absolute path
937    output=""
938    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
939    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
940        [ -h "$path" ] && continue
941        [ ! -e "$path/$fname_to_find" ] && continue
942        output="$path/$fname_to_find $output"
943        if [ -h "$path/$fname_to_find" ] ; then
944            output="`mr-read-all-link $path/$fname_to_find` $output"
945        fi
946    done
947    if [ "$output" = "" ] ; then
948        return 1
949    fi
950    echo "$output"
951    return 0
952}
953
954LogProgress() {
955    local i progress modres noof_lines
956 
957    progress=$1
958    noof_lines=$2
959
960    echo -en "\r\t\t\t\t\t\t\t\t"
961    i=$(($progress*100))
962    if [ $noof_lines -ne 0 ]; then
963        i=$(($i/$noof_lines))
964    else
965        i=0
966    fi
967    echo -en "$i"
968    echo -en "%"
969    modres=$(($progress%4))
970    [ "$modres" -eq "0" ] && echo -en "\t/"
971    [ "$modres" -eq "1" ] && echo -en "\t-"
972    [ "$modres" -eq "2" ] && echo -en "\t\\"
973    [ "$modres" -eq "3" ] && echo -en "\t|"
974}
975
976# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
977MakeMondoConfigFile() {
978    local outfile use_lzo use_comp use_star
979    outfile=$1
980    > $outfile
981    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
982    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
983    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
984    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
985    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
986    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
987    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
988    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
989    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
990    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
991    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
992    echo "use-lzo $use_lzo" >> $outfile
993    echo "use-gzip $use_gzip" >> $outfile
994    echo "use-star $use_star" >> $outfile
995    echo "use-lzma $use_lzma" >> $outfile
996    echo "use-comp $use_comp" >> $outfile
997    echo "datestamp `date`" >> $outfile
998    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
999    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1024}
1025
1026# Get PV's for an LV
1027GetPVsForLV() {
1028  if [ -n "$1" ]; then
1029    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1030    if [ -z "$vg" ]; then
1031      return
1032    fi
1033    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1034  fi
1035}
1036
1037
1038MakeMountlist() {
1039    local mountlist all_partitions current_partition \
1040partition_size partition_format outstring partition_number \
1041partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1042absolute_partition old_partition_fmt current_lvolume uname skip
1043
1044    LogFile "------------------------------------"
1045    LogFile "Your raw fstab file looks like this:"
1046    LogFile "------------------------------------"
1047    cat $MY_FSTAB >> $LOGFILE
1048    LogAll "-----------------------------------"
1049    LogAll "Your mountlist will look like this:"
1050    LogAll "-----------------------------------"
1051
1052# mountlist(OUT)
1053    mountlist=$1
1054
1055# NB: partition = device
1056# NB: mountpt = where the device is mounted
1057
1058    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1059
1060    [ "$mountlist" != "" ] && rm -Rf $mountlist
1061    > $mountlist
1062    all_partitions=""
1063   
1064    if [ $LVM != "false" ]; then
1065        LogAll "INFO: Analyzing LVM..."
1066        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1067        if [ $? -ne 0 ]; then
1068            LVM="false"
1069        fi
1070        # Excluded LVs and GVs are not reported here
1071        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1072    fi
1073    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1074    for i in $IMAGE_DEVS ; do
1075        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1076    done
1077    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1078    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1079    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1080    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1081    for c_p in $all_partitions ; do
1082        # Skip fd/cd devices, network FS, cifs
1083        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1084        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1085        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1086            current_partition=`readlink -f $c_p`
1087            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1088                current_partition="$c_p"
1089            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1090                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1091                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1092            fi
1093            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1094        else
1095            current_partition="$c_p"
1096        fi
1097        [ "$c_p" = "none" ] && continue
1098        redhat_label=""
1099        label=""
1100        uuid=""
1101        absolute_partition=`readlink -f $c_p`
1102        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1103
1104        # set default in case we dont't find it
1105        str_to_find_fmt_with=$current_partition
1106
1107        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1108        # current_partition contains only first column of /etc/fstab
1109        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1110            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1111            actual_dev=""
1112
1113            # 1st try, findfs - the RHEL way of finding labels and their partitions
1114            if [ -x "/sbin/findfs" ]; then
1115                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1116            fi
1117   
1118            # 2nd try : blkid, the good way for all LABEL except swap
1119            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1120                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1121                # For LVM FS it will give a /dev/dm-# which should then be converted
1122                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1123                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1124                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1125                    for dev in `ls /dev/mapper/*`; do
1126                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1127                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1128                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1129                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1130                            break
1131                        fi
1132                    done
1133                fi
1134            fi
1135   
1136            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1137            # For LVM gives a /dev/mapper entry
1138            if [ "x$actual_dev" = "x" ]; then
1139                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1140            fi
1141   
1142            # 4th try, with vol_id
1143            # SWAP only
1144            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1145                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1146                for dev_swap in $list_swaps ; do
1147                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1148                    if [ "x$dev_exists" != "x" ]; then
1149                        actual_dev=$dev_swap
1150                        break;
1151                    fi
1152                done
1153            fi
1154
1155            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1156            # LABEL=SW-cciss/c0d0p3 (RDP)
1157            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1158            # SWAP only
1159            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1160                    skip=""
1161                    uname=$KERVERRUN
1162                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1163                    # 2.6.12 needs 16 (FC3)
1164                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1165                    # 2.6.19 and upper needs 1052
1166                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1167                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1168                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1169                    if [ $skip = "" ]; then
1170                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1171                    fi
1172                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1173                    do
1174                        # Location of the swap label for kernel 2.6
1175                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1176                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1177                            actual_dev=$try_dev
1178                        fi
1179                    done
1180            fi
1181
1182            # Check if one of all those tries has known success
1183            if [ "x$actual_dev" != "x" ]; then
1184                current_partition=$actual_dev
1185            else
1186                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1187            fi
1188        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1189        # current_partition contains only first column of /etc/fstab
1190        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1191            uuid=`echo "$current_partition" | cut -d'=' -f2`
1192            actual_dev=""
1193
1194            # 1st try, findfs - the RHEL way of finding labels and their partitions
1195            if [ -x "/sbin/findfs" ]; then
1196                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1197            fi
1198   
1199            # 2nd try : blkid, the good way for all UUID except swap
1200            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1201                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1202                # For LVM FS it will give a /dev/dm-# which should then be converted
1203                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1204                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1205                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1206                    for dev in `ls /dev/mapper/*`; do
1207                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1208                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1209                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1210                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1211                            break
1212                        fi
1213                    done
1214                fi
1215            fi
1216   
1217            # 3th try, with vol_id
1218            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1219                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1220                for dev in $list_dev ; do
1221                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1222                    if [ "x$dev_exists" != "x" ]; then
1223                        actual_dev=$dev
1224                        break;
1225                    fi
1226                done
1227            fi
1228
1229            # 4th try, with dumpuuid (VMWare only ?) for swap
1230            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1231                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1232                for dev in $list_dev ; do
1233                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1234                    if [ "x$dev_exists" != "x" ]; then
1235                        actual_dev=$dev
1236                        break;
1237                    fi
1238                done
1239            fi
1240
1241            # Check if one of all those tries has known success
1242            if [ "x$actual_dev" != "x" ]; then
1243                current_partition=$actual_dev
1244            else
1245                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1246            fi
1247        else
1248            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1249            # they use symlinks in fstab unrelated to what is shown in mount !
1250            if [ _"$partition_mountpt" = _"" ]; then
1251                # set default in case we dont't find it
1252                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1253                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1254                            str_to_find_fmt_with=$tmpp
1255                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1256                            break;
1257                        fi
1258                done
1259            fi
1260        fi
1261
1262        # Detects noauto partitions not mounted and exclude them
1263        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1264        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1265                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1266            continue
1267        fi
1268        # Detects bind partitions and exclude them
1269        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1270                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1271            continue
1272        fi
1273
1274        # Look for devices which have to be excluded
1275        skip=0
1276        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1277            l=""
1278            list_of_devices="`mr-read-all-link $current_partition`"
1279            for d in $list_of_devices; do
1280                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1281            done
1282
1283            # Remove PVs from LVs excluded
1284            l="$l `GetPVsForLV $current_partition`"
1285
1286            # We want a single unique list
1287            list_of_devices="`echo $l | sort -u`"
1288
1289            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1290                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1291                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1292                    skip=1
1293                    continue
1294                fi
1295            done
1296        fi
1297        if [ $skip -eq 1 ]; then
1298            continue
1299        fi
1300
1301        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1302        # Detects iso9660 ISO images and exclude them
1303        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1304                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1305            continue
1306        fi
1307        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1308        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1309        # the former is then a link to the latter, so we test whether
1310        # $current_partition is actually such a link or not and set
1311        # $current_lvolume accordingly. On Debian you may find more than one answer
1312        # so we remove the one corresponding to /dev/.static
1313        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1314        # principle is the same and we need to find the link to it as well.
1315        # Note that $current_lvolume may well be an
1316        # ordinary device. It is just to make sure that we feed the right value
1317        # into any of the LVM tools if possible.
1318
1319        current_lvolume="$current_partition"
1320        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1321            # .static dir are a Debian specificity
1322            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1323            echo $current_lvolume | grep -q ' '
1324            if [ $? -eq 0 ]; then
1325                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1326            fi
1327            # if it's not found, it may well be a real device such as a multipath one
1328            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1329            if [ _"$current_lvolume" = _"" ]; then
1330                current_lvolume="$current_partition"
1331            fi
1332        fi
1333        #
1334        # End of LVM device style variation code (other than $current_lvolume).
1335
1336        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1337            # Size computed via LVM not directly
1338            partition_size="lvm"
1339        else
1340            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1341            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1342            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1343                # Skip swap files
1344                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1345                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1346                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1347                [ "$partition_format" != "swap" ] && partition_format="swap"
1348                if [ "$partition_size" = "" ] ; then
1349                    totalsize=0
1350                    items=0
1351                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1352                        totalsize=$(($totalsize+$i))
1353                        items=$(($items+1))
1354                    done
1355                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1356                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1357                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1358                fi
1359            else
1360                partition_size=`SizeOfPartition $current_partition`
1361            fi
1362        fi
1363        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1364        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1365        if [ "$partition_mountpt" = "" ] ; then
1366            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1367                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1368                    partition_mountpt="raid"
1369                    partition_format="raid"
1370                else
1371                    partition_mountpt="lvm"
1372                    partition_format="lvm"
1373                fi
1374            fi
1375        fi
1376        psz=$partition_size
1377        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1378        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1379        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1380            partition_mountpt="image"
1381            old_partition_fmt=$partition_format
1382            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1383            partition_size=$(($partition_size+1)); # just in case
1384            if [ "$partition_format" = "Linux" ] ; then
1385                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1386                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1387                partition_format=$old_partition_fmt
1388            fi
1389        fi
1390
1391        if [ ! "$partition_mountpt" ] ; then
1392            LogFile "------- $FDISK -l $qq log ------------"
1393            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1394                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1395                [ "$partition_format" ] && break
1396            done
1397            LogFile "------- $FDISK log end ------------"
1398            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1399                partition_format="compaq"
1400            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1401                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1402                continue
1403            fi
1404        fi
1405        if [ "$redhat_label" ]; then
1406            label="$redhat_label"
1407        elif [ "$uuid" ]; then
1408            label="$uuid"
1409        fi
1410        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1411        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1412        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1413        if [ "$current_partition" = "" ] ; then
1414            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1415        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1416            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1417                partition_mountpt=raid
1418                partition_format=raid
1419                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1420                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1421            else
1422                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1423            fi
1424        elif [ "$partition_format" = "" ] ; then
1425            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1426        elif [ "$partition_size" = "" ] ; then
1427            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1428        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1429            continue
1430        else
1431            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1432                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1433                partition_format="vfat"
1434            fi
1435            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1436            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1437        fi
1438    done
1439    LogAll "-----------------------------------" 
1440}
1441
1442CheckMountlist() {
1443    local file=$1
1444    # Coherency verification
1445    ML01=`cat $file | wc -l`
1446    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1447    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1448    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1449    if [ "$ML01" -ne "$ML1" ]; then
1450        LogFile "--------------------------------------------"
1451        LogAll "WARNING: Duplicate device entry in mountlist"
1452        LogFile "--------------------------------------------"
1453    fi
1454    if [ "$ML02" -ne "$ML2" ]; then
1455        LogFile "--------------------------------------------"
1456        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1457        LogFile "------------------------------------------------"
1458    fi
1459}
1460
1461OfferToMakeBootableISO() {
1462    local i old_pwd
1463    if [ -z "$ISO_CMD" ]; then
1464        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1465        return
1466    fi
1467    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1468        echo -en "Shall I make a bootable CD image? (y/[n]) "
1469        read i
1470        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1471    fi
1472    rm -Rf $MINDI_TMP/iso
1473    mkdir -p $MINDI_TMP/iso/{images,archives}
1474    LogFile "INFO: mindi_lib = $MINDI_LIB"
1475    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1476    for i in memdisk memtest.bin memtest.img ; do
1477        j=$MINDI_LIB/$i
1478        k=$MINDI_TMP/iso
1479        if [ -e "$j" ] ; then
1480            LogAll "INFO: Copying $j to $k"
1481            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1482            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1483            if [ _"$MONDO_SHARE" != _"" ]; then 
1484                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1485            fi
1486        fi
1487    done
1488    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1489    if [ $KERNEL_IS_XEN = "yes" ]; then
1490        FindMboot32Binary
1491        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1492        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1493    fi
1494    # Useful for syslinux 5.x
1495    FindLdlinux32Binary
1496    if [ -e $LDLINUXC32 ]; then
1497        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1498    fi
1499    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1500    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1501
1502    if [ _"$MONDO_SHARE" != _"" ]; then 
1503        if [ $KERNEL_IS_XEN = "yes" ]; then
1504            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1505            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1506        fi
1507        if [ -e $LDLINUXC32 ]; then
1508            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1509        fi
1510        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1511        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1512    fi
1513    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1514    if [ "$ARCH" != "ia64" ] ; then
1515        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1516    fi
1517    old_pwd=`pwd`
1518    cd "$MINDI_TMP/iso"
1519    if [ "$ARCH" != "ia64" ] ; then
1520        if [ _"$MONDO_SHARE" != _"" ]; then 
1521            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1522            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1523                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1524            fi
1525            if [ $KERNEL_IS_XEN = "yes" ]; then
1526                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1527            fi
1528            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1529        fi
1530        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1531    else
1532        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1533    fi
1534    if [ "$?" -ne "0" ] ; then
1535        LogFile "----------- $ISO_CMD's errors --------------"
1536        LogAll "$ISO_CMD returned the following errors:"
1537        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1538        LogAll "ERROR: Failed to create ISO image."
1539    else
1540        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1541    fi
1542    rm -f $MINDI_TMP/mkisofs.log
1543    cd "$old_pwd"
1544}
1545
1546
1547OfferToMakeBootableUSB() {
1548    local i
1549    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1550        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1551        read i
1552        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1553        if [ "$USBDEVICE" = "" ]; then
1554            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1555            read dev
1556            USBDEVICE=$dev
1557        fi
1558        echo "WARNING: This will erase all content on $USBDEVICE"
1559        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1560        read i
1561        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1562    fi
1563    rm -Rf $MINDI_TMP/usb
1564    mkdir -p $MINDI_TMP/usb
1565    USBPART="${USBDEVICE}1"
1566
1567    echo -en "Transforming $USBDEVICE in a Bootable device " 
1568    echo -en "."
1569    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1570    LogFile "INFO: Checking $USBDEVICE"
1571    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1572    if [ $? -ne 0 ]; then
1573        LogAll "ERROR: Unable to access $USBDEVICE"
1574        LogAll "       Make sure your USB device is plugged in"
1575        MindiExit -1
1576    fi
1577    echo -en "."
1578    # Some distro do auto mount at that point (Ubuntu)
1579    LogFile "INFO: Unmounting $USBPART just in case"
1580    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1581    # If your key has no MBR it may cause an issue
1582    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1583    if [ -r $MBRFILE ]; then
1584        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1585        dd if=$MBRFILE of=$USBDEVICE
1586    else
1587        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1588        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1589    fi
1590    LogFile "INFO: Preparing $USBDEVICE"
1591    cat > $MINDI_TMP/fdisk.txt << EOF
1592d
1593d
1594d
1595d
1596n
1597p
15981
1599
1600
1601t
1602b
1603a
16041
1605w
1606EOF
1607    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1608    if [ $? -ne 0 ]; then
1609        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1610        LogAll "       Make sure your USB device is plugged in"
1611        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1612        MindiExit -1
1613    fi
1614    LogFile "fdisk build file"
1615    LogFile "----------------"
1616    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1617    LogFile "----------------"
1618    rm -f $MINDI_TMP/fdisk.txt
1619    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1620    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1621    echo -en "."
1622    # Calling kpartx in case devices were not created
1623    if [ -x "/sbin/kpartx" ]; then
1624        /sbin/kpartx -a $USBDEVICE
1625    fi
1626    # Some distro do auto mount at that point (Ubuntu)
1627    LogFile "INFO: Unmounting $USBPART just in case again"
1628    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1629    echo -en "."
1630    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1631    if [ "`which dmsetup`" != "" ]; then
1632        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1633        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1634            LogFile "INFO: Removing $block_id from device mapper."
1635            sleep 1
1636            dmsetup remove $block_id
1637        fi
1638    fi
1639    echo -en "."
1640    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1641    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1642    if [ $? -ne 0 ]; then
1643        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1644        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1645        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1646        MindiExit -1
1647    fi
1648    echo -en "."
1649    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1650    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1651    if [ $? -ne 0 ]; then
1652        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1653        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1654        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1655        MindiExit -1
1656    fi
1657    echo -en "."
1658    mkdir -p $MINDI_TMP/usb/images
1659    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1660    echo -en "."
1661    LogFile "INFO: mindi_lib = $MINDI_LIB"
1662    for i in memdisk memtest.bin memtest.img ; do
1663        j=$MINDI_LIB/$i
1664        k=$MINDI_TMP/usb
1665        if [ -e "$j" ] ; then
1666            LogIt "INFO: Copying $j to $k"
1667            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1668            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1669        fi
1670    done
1671    echo -en "."
1672    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1673    echo -en "."
1674    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1675    echo -en "."
1676    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1677    echo -en "."
1678    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1679    echo -en "."
1680    LogAll "----------- syslinux's conf --------------"
1681    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1682    LogAll "------------------------------------------"
1683    umount $MINDI_TMP/usb
1684    if [ "$ARCH" != "ia64" ] ; then
1685        syslinux -v 2>&1 | grep -q 4.02
1686        if [ $? -eq 0 ]; then
1687            # This buggy version of syslinux requires a call to --stupid and not -s
1688            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1689            res=$?
1690        else
1691            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1692            res=$?
1693        fi
1694        if [ $res -ne 0 ] ; then
1695            LogAll "----------- syslinux's errors --------------"
1696            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1697            LogAll "------------------------------------------"
1698            LogIt "ERROR: Failed to create USB image."
1699        else
1700            echo -e "$DONE"
1701            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1702        fi
1703        rm -f $MINDI_TMP/syslinux.log
1704    else
1705        LogAll "ERROR: No USB boot support for ia64"
1706        MindiExit -1
1707    fi
1708}
1709
1710
1711MakeMessageFile() {
1712   
1713    if [ -x "/bin/lsb_release" ]; then
1714        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1715    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1716        DESC="Arch Linux"
1717        if [ -r /var/log/pacman.log ]; then
1718            # there are no releases but we can get the last system upgrade
1719            # Output example:   Arch Linux [2011-03-03 01:39]
1720            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1721        fi
1722    elif [ -r /etc/issue.net ]; then
1723        DESC=`head -1 /etc/issue.net`
1724    elif [ -r /etc/issue ]; then
1725        DESC=`head -1 /etc/issue`
1726    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1727        # For pb >= 0.9.8
1728        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1729    else
1730        DESC="Unknown desc"
1731    fi
1732    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1733    if [ _"$MONDO_SHARE" != _"" ]; then
1734        if [ "$CDRECOVERY" != "yes" ] ; then
1735            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1736                echo -en "Press <enter> to continue.\n"
1737            elif [ ! "$MINDI_TMP" ] ; then
1738                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1739                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1740                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1741                fi
1742            else
1743                echo -en "$BOOT_MEDIA_MESSAGE"
1744            fi
1745        else
1746            echo -en "\
1747To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1748CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1749        fi
1750    fi
1751
1752    # Also create the other help screens
1753    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1754    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1755    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1756}
1757
1758
1759MakeBootConfFile() {
1760    local options i ooo
1761    options=""
1762    # Type of boot file (elilo or syslinux/isolinux)
1763    type=$1
1764    if [ "$type" = "elilo" ]; then
1765        sep="="
1766    else
1767        sep=" "
1768    fi
1769
1770    # Generic header for conf file
1771    if [ "$type" != "elilo" ] ; then
1772        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1773    else
1774        echo -en "prompt\n"
1775    fi
1776
1777    # Compute which default option to boot from
1778    if [ "$CDRECOVERY" = "yes" ] ; then
1779        echo -en "default${sep}RESTORE\n"
1780    # In case it's mondoarchive
1781    elif [ _"$MONDO_SHARE" != _"" ]; then
1782        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1783            echo -en "default${sep}iso\n"
1784        else
1785            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1786        fi
1787    else
1788        echo -en "default${sep}expert\n"
1789    fi
1790
1791    # Handle timeout
1792    if [ "$CDRECOVERY" != "yes" ] ; then
1793        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1794    else
1795        echo -en "timeout${sep}10000\n"
1796    fi
1797    echo -en "\n"
1798
1799    # prepare which labels will be generated
1800    if [ "$CDRECOVERY" = "yes" ] ; then
1801        options="RESTORE expert"
1802    else
1803        if [ _"$MONDO_SHARE" != _"" ]; then
1804            options="interactive expert compare iso nuke isonuke"
1805        else
1806            options="expert"
1807        fi
1808    fi
1809
1810    # Generate rest of conf file
1811    for i in $options ; do
1812        ooo=$i
1813        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1814        if [ "$type" = "elilo" ]; then
1815            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1816        else
1817            ps="/"
1818            if [ "$type" = "syslinux" ]; then
1819                ps=""
1820            fi
1821            if [ $KERNEL_IS_XEN = "no" ]; then
1822                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1823            else
1824                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1825            fi
1826        fi
1827        echo -en "$outstr"
1828    done
1829    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1830        if [ "$type" = "elilo" ]; then
1831            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1832            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1833        else
1834            ps="/"
1835            if [ "$type" = "syslinux" ]; then
1836                ps=""
1837            fi
1838            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1839            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1840        fi
1841    fi
1842}
1843
1844
1845PrepareBootDiskImage_LILO() {
1846    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1847    imagesdir=$MINDI_CACHE
1848    kernelpath=$1
1849
1850    retval=0
1851
1852    old_pwd=`pwd`
1853    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1854    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1855    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1856    echo -en "..."
1857    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1858    mkdir -p $mountpoint
1859    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1860    LogFile "Creating vfat filesystem on $imagefile" 
1861    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1862    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1863
1864    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1865    mkdir -p $mountpoint/etc
1866    liloconf=$mountpoint/elilo.conf
1867
1868    MakeBootConfFile elilo > $liloconf
1869
1870    # Copy it so that CD-ROM menu entry is satisfied
1871    mountefi=0
1872    df -T | grep /boot/efi | grep -q vfat
1873    if [ $? -ne 0 ]; then
1874        mount /boot/efi
1875        if [ $? -ne 0 ]; then
1876            echo "You have to mount your EFI partition when using mindi"
1877            MindiExit -1
1878        fi
1879        mountefi=1
1880    fi
1881    el=`find /boot/efi -name elilo.efi`
1882    cp $el $mountpoint
1883    cp $liloconf $mountpoint
1884    if [ $mountefi -eq 1 ]; then
1885        umount /boot/efi 2>&1 > /dev/null
1886    fi
1887
1888    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1889    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1890    if [ "$?" -ne "0" ] ; then
1891        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1892        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1893        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1894        rm -f $MINDI_TMP/mtpt.$$
1895        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1896        retval=$(($retval+1))
1897    fi
1898    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1899
1900    mkdir -p $mountpoint/tmp
1901    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1902        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1903    fi
1904
1905    # copy the kernel across
1906    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1907    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1908    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1909    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1910    if [ "$?" -ne "0" ] ; then
1911        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1912        du -sk $mountpoint/* >> $LOGFILE
1913        LogFile "--- end of list of files ---"
1914        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1915        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1916        cd "$old_pwd"
1917        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1918        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1919    #   losetup /dev/loop0 -d
1920        [ "$imagefile" != "" ] && rm -f $imagefile
1921        LogIt "ERROR: Sorry, your kernel is too big for your image"
1922        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1923        return 0
1924    fi
1925    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1926    LogFile "INFO: Free space left on image = $free_space KB"
1927    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1928    # make it bootable
1929    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1930    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1931    if [ "$KERN_DISK_MADE" ] ; then
1932        LogFile "INFO: Not running LILO. It's not that kind of disk."
1933    fi
1934
1935    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1936    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1937    echo -en "..."
1938    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1939    if [ "$retval" -eq "0" ] ; then
1940        echo -en "...$DONE\n"
1941        if [ "$KERN_DISK_MADE" ] ; then
1942            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1943        fi
1944    else
1945        echo -en "...failed\n"
1946        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1947        [ "$imagefile" != "" ] && rm -f $imagefile
1948    fi
1949    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1950    return $retval
1951}
1952
1953
1954PrepareBootDiskImage_ISOLINUX() {
1955    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1956    imagesdir=$MINDI_CACHE
1957    kernelpath=$1
1958    do_boot_root_thingy=""
1959    retval=0
1960
1961    old_pwd=`pwd`
1962    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1963    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1964    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1965    echo -en "..."
1966    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1967    mkdir -p $mountpoint
1968    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1969    LogFile "INFO: Creating vfat filesystem on $imagefile"
1970    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1971    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1972    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1973
1974    # Only move it now to its final destination and use it now
1975    mv $imagefile $imagesdir
1976    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1977
1978    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1979
1980    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1981    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1982    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1983    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1984    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1985    if [ "$?" -ne "0" ] ; then
1986        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1987        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1988        LogAll "       Please unload some of your modules and try again."
1989        rm -f $MINDI_TMP/mtpt.$$
1990        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1991        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1992        retval=$(($retval+1))
1993    fi
1994
1995    mkdir -p $mountpoint/tmp
1996    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1997        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1998    fi
1999
2000    # copy the kernel across
2001    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2002    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2003    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2004         
2005    retval=0
2006    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2007    retval=$?
2008    if [ $KERNEL_IS_XEN = "yes" ]; then
2009        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2010        let retval+=$?
2011    fi
2012 
2013    if [ "$retval" -ne "0" ] ; then
2014        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2015        du -sk $mountpoint/* >> $LOGFILE
2016        LogFile "--- end of list of files ---"
2017        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2018        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2019        cd "$old_pwd"
2020        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2021        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2022
2023        LogIt "ERROR: Sorry, your kernel is too big for your image"
2024        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2025    fi
2026    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2027    LogFile "INFO: Free space left on image = $free_space KB"
2028    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2029
2030    # make it bootable
2031    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2032    mkdir -p $mountpoint/etc
2033    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2034    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2035    echo -en "..."
2036    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2037
2038    if [ "$retval" -eq "0" ] ; then
2039        echo -en "...$DONE\n"
2040        if [ "$KERN_DISK_MADE" ] ; then
2041            [ "$imagefile" != "" ] && rm -f $imagefile
2042            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2043        fi
2044    else
2045        echo -en "...failed\n"
2046        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2047        [ "$imagefile" != "" ] && rm -f $imagefile
2048    fi
2049    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2050    return $retval
2051}
2052
2053
2054ParseModprobeForIncludes() {
2055local MODPROBE_CONF mpincfile includes include
2056
2057MODPROBE_CONF=/etc/modprobe.conf
2058mpincfile=$1
2059touch $mpincfile
2060if [ -a $MODPROBE_CONF ]; then
2061    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2062    if [ -n "$includes" ]; then
2063        for include in $includes
2064        do
2065            if [ -a "$include" ]; then
2066                echo $include >> $mpincfile
2067            fi
2068        done
2069    fi
2070fi
2071}
2072
2073
2074PrepareDataDiskImages() {
2075    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2076
2077    imagesdir=$MINDI_CACHE
2078    rm -f $imagesdir/mindi.iso
2079    needlist=$MINDI_TMP/what-we-need.txt
2080    bigdir=$MINDI_TMP/bigdir
2081    mkdir -p $bigdir/usr/bin
2082    mkdir -p $bigdir/usr/sbin
2083    includefile=$MINDI_TMP/$$.includefile.txt
2084
2085    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2086    if [ -e "$DEPLIST_FILE" ]; then
2087        lfiles="$DEPLIST_FILE $lfiles"
2088    fi
2089    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2090    ParseModprobeForIncludes $includefile
2091    lines=$(($lines+`cat $includefile | wc -l`))
2092    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2093    res=$?
2094    rm -f $includefile
2095    ListKernelModulePaths >> $needlist
2096    if [ "$res" -ne "0" ] ; then
2097        Die "You have $res files present in dependency list\nbut absent from filesystem."
2098    fi
2099    FindAndAddUserKeyboardMappingFile
2100    mkdir -p $bigdir/tmp
2101    if [ _"$MONDO_SHARE" != _"" ]; then
2102        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2103        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2104    fi
2105    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2106    DropOptimizedLibraries $needlist $bigdir
2107    echo -en "Assembling dependency files"
2108
2109    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2110
2111    # also copy io.sys and msdos.sys, if we can find them
2112    for i in `mount | cut -d' ' -f3` ; do
2113        for j in io.sys msdos.sys ; do
2114            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2115        done
2116    done
2117
2118    # master boot record, too
2119    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2120    if [ "$i" ] ; then
2121        LogAll "INFO: Backing up $i's MBR"
2122        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2123        sleep 1
2124        sync
2125        j=$i
2126        [ -h "$j" ] && j=`readlink -f $j`
2127        LogAll "INFO: Creating /dev/boot_device ($j)"
2128        mkdir -p $bigdir/dev
2129        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2130    fi
2131
2132    old_pwd=`pwd`
2133    cd "$bigdir"
2134
2135    # Get terminfo content
2136    ti="usr/share/terminfo/l"
2137    if [ -d /$ti ]; then
2138        mkdir -p $ti
2139        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2140    fi
2141    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2142        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2143        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2144    fi
2145    if [ -d "/lib/dev-state" ]; then 
2146        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2147    fi
2148    cd "$old_pwd"
2149    echo -e "$DONE"
2150    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2151    MakeMountlist $MINDI_TMP/mountlist.txt
2152    CheckMountlist $MINDI_TMP/mountlist.txt
2153    mkdir -p $bigdir/tmp
2154    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2155    if [ _"$MONDO_SHARE" != _"" ]; then
2156        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2157    fi
2158    if [ $LVM != "false" ]; then
2159        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2160        if [ "$?" -ne "0" ]; then
2161            LVM="false"
2162            rm -f $bigdir/tmp/i-want-my-lvm
2163        else
2164            LogFile "Your i-want-my-lvm file content is:"
2165            LogFile "-----------------------------------"
2166            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2167            LogFile "-----------------------------------"
2168        fi
2169    fi
2170    LogFile "Your mountlist.txt file content is:"
2171    LogFile "-----------------------------------"
2172    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2173    LogFile "-----------------------------------"
2174
2175    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2176    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2177    if [ _"$MONDO_SHARE" != _"" ]; then
2178        for q in filelist.full.gz biggielist.txt ; do
2179            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2180            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2181        done
2182    fi
2183
2184    echo -en "Tarring and zipping the data content..."
2185    size_of_all_tools=`du -sk $bigdir | cut -f1`
2186    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2187    LogFile "Size of the data content"
2188    LogFile "------------------------"
2189    du -sk $imagesdir/*gz >> $LOGFILE
2190    LogFile "------------------------"
2191    echo -e "$DONE"
2192
2193    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2194    rm -rf $bigdir
2195    rm -f $needlist
2196}
2197
2198
2199ProcessLDD() {
2200    local incoming f d nd bd bnd
2201    read incoming
2202    while [ "$incoming" != "" ]; do
2203        # We take the full path name of the dyn. lib. we want
2204        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2205        for f in $incoming ; do
2206            # echo modified file name if one of the parent dir is a link
2207            # by replacing the original dirname by the destination of the link
2208            d="`dirname $f`"
2209            found="false"
2210            while [ "$d" != "/" ]; do
2211                if [ -h "$d" ]; then
2212                    nd=`readlink -f $d`
2213                    bd=`basename $d`
2214                    bnd=`basename $nd`
2215                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2216                    echo $d
2217                fi
2218                d="`dirname $d`"
2219            done
2220
2221            echo "$f"
2222            echo "`ReadAllLink $f`"
2223        done
2224        read incoming
2225    done
2226}
2227
2228
2229Prompt() {
2230    echo -en "$1"
2231    read line
2232}
2233
2234
2235ReadLine() {
2236    local i incoming
2237    read incoming
2238    i=0
2239    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2240        i=$(($i+1))
2241        read incoming
2242    done
2243    echo "$incoming"
2244}
2245
2246
2247SizeOfPartition() {
2248    local devpath drive res stub
2249    device=$1
2250    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2251        Die "Cannot find $device's size - is your /etc/fstab sane?"
2252    fi
2253    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2254        res=`SizeOfRaidPartition $device`
2255        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2256        echo "$res"
2257        return 0
2258    fi
2259    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2260    res=`$FDISK -s $device 2>> $LOGFILE`
2261    # end patch
2262    # take only the first in case of multiple mount (cifs, nfs, ...)
2263    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2264    [ "$res" = "" ] && res="-1"
2265    echo $res
2266    return 0
2267}
2268
2269
2270SizeOfRaidPartition() {
2271    local real_dev smallest_size silly tmp
2272
2273    silly=999999999
2274    smallest_size=$silly
2275
2276    for real_dev in `GetRaidDevMembers $1` ; do
2277        tmp=`SizeOfPartition $real_dev`
2278        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2279    done
2280
2281    if [ "$smallest_size" = "$silly" ] ; then
2282        echo "-1"
2283        return 1
2284    else
2285        echo "$smallest_size"
2286        return 0
2287    fi
2288}
2289
2290
2291StripExecutable()
2292{
2293    local tmpfile
2294
2295    tmpfile=$MINDI_TMP/stripped.$$.dat
2296    [ -d "$1" ] || [ -h "$1" ] && return
2297    cp -f $1 $tmpfile 2>> $LOGFILE
2298    strip $tmpfile 2> /dev/null
2299    if [ "$?" -eq "0" ] ; then
2300        cp -f $tmpfile $1 2>> $LOGFILE
2301        LogFile "INFO: Stripped binary $2"
2302    fi
2303    rm -f $tmpfile
2304}
2305
2306KernelVer() {
2307        local fkern_ver fname
2308
2309        fname=$1
2310        file $fname | grep -q gzip
2311        if [ "$?" -eq "0" ] ; then
2312            # Used by ia64
2313            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2314        else
2315            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2316        fi
2317        echo "$fkern_ver"
2318}
2319
2320
2321# WARNING: This function should just echo the final result !!!
2322#
2323TryToFindKernelPath() {
2324    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2325
2326    we_want_version=$KERVERRUN
2327    possible_kernels=""
2328    duff_kernels=""
2329    output=""
2330   
2331    if [ "$ARCH" = "ia64" ] ; then
2332       root="/boot/efi/efi"
2333    else
2334       root="/"
2335    fi
2336    # See if we're booted from a Xen kernel
2337    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2338    if [ -f /proc/xen/capabilities ]; then
2339        # It's a Xen kernel
2340        KERNEL_IS_XEN="yes"
2341        LogFile "INFO: It's a Xen kernel..."
2342    fi
2343
2344    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2345        [ ! -e "$fname" ] && continue
2346        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2347        fkern_ver=`KernelVer $fname`
2348        [ "$fkern_ver" = "" ] && continue
2349        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2350        [ -f "$fname" ] || continue
2351        [ -h "$fname" ] && continue
2352        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2353        file $fname | grep -q gzip
2354        if [ "$?" -eq "0" ] ; then
2355            # Used by ia64
2356            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2357                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2358                duff_kernels="$fname $duff_kernels"
2359            else
2360                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2361                possible_kernels="$fname $possible_kernels"
2362            fi
2363        else
2364            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2365                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2366                duff_kernels="$fname $duff_kernels"
2367            else
2368                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2369                possible_kernels="$fname $possible_kernels"
2370            fi
2371        fi
2372    done
2373    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2374        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2375    fi
2376    if [ ! "$possible_kernels" ] ; then
2377        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2378        possible_kernels="$duff_kernels"
2379        if [ ! "$possible_kernels" ] ; then
2380            LogAll "INFO: Sorry, no duff kernels either"
2381        else
2382            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2383            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2384        fi
2385    fi
2386    if [ $KERNEL_IS_XEN = "yes" ]; then
2387        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2388        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2389    fi
2390    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2391    noof_kernels=`CountItemsIn "$possible_kernels"`
2392    if [ "$noof_kernels" -eq "0" ] ; then
2393        LogAll "Could not find your kernel."
2394        if [ -e "/boot/vmlinuz" ] ; then
2395            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2396            output=/boot/vmlinuz
2397        else
2398            output=""
2399        fi
2400    elif [ "$noof_kernels" -eq "1" ] ; then
2401        kp=`echo "$possible_kernels" | sed s/' '//`
2402        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2403        output="$kp"
2404    else
2405        for i in $possible_kernels ; do
2406            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2407                LogAll "INFO: OK, I used my initiative and found that "
2408                LogAll "INFO: $i is probably your kernel. "
2409                output="$i"
2410                break
2411            fi
2412        done
2413        if [ ! -n "$output" ]; then
2414            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2415                output=/boot/vmlinuz
2416                LogFile "INFO: Schlomo, this one's for you."
2417            else
2418                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2419                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2420                LogFile "INFO: $possible_kernels"
2421                output=""
2422            fi
2423        fi
2424    fi
2425    if [ $KERNEL_IS_XEN = "yes" ]; then
2426        if [ "$noof_xenkernels" -eq "0" ]; then
2427            xenkernelpath=""
2428        elif [ "$noof_xenkernels" -eq "1" ]; then
2429            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2430            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2431        else
2432            for i in $possible_xenkernels ; do
2433                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2434                    LogFile "INFO: OK, I used my initiative and found that "
2435                    LogFile "INFO: $i is probably your Xen kernel. "
2436                    xenkernelpath="$i"
2437                    break
2438                fi
2439            done
2440            if [ ! -n "$xenkernelpath" ]; then
2441                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2442                if [ ! -n "$new_possible_xenkernels" ]; then
2443                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2444                    LogFile "INFO: Using $xenkernelpath"
2445                else
2446                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2447                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2448                    LogFile "INFO: $possible_xenkernels"
2449                    output=""
2450                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2451                    LogFile "INFO: Using $xenkernelpath"
2452                fi
2453            fi
2454        fi
2455        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2456            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2457        fi
2458    fi
2459    LogAll "TryToFindKernelPath found $output"
2460    echo "$output"
2461}
2462
2463
2464TurnTgzIntoRdz() {
2465    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2466
2467    tgz_dir_fname=$1
2468    rdz_fname=$2
2469    kernelsize=$3
2470    maxsize=$(($BOOT_SIZE-$kernelsize))
2471    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2472    tempfile=$MINDI_TMP/temp.rd
2473    res=0
2474    echo -en "..."
2475    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2476    echo -en "..."
2477    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2478    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2479    echo -en "..."
2480    mkdir -p $mountpoint
2481    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2482    echo -en "..."
2483    old_pwd=`pwd`
2484    cd "$mountpoint"
2485
2486    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2487    for d in bin sbin lib lib64; do
2488        if [ -h "/$d" ]; then
2489            thelink=`readlink /$d`
2490            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2491            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2492            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2493                rmdir $mountpoint/$d
2494            fi
2495            if [ ! -h $mountpoint/$d ]; then
2496                rm -f $mountpoint/$d 2> /dev/null
2497                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2498            fi
2499        fi
2500    done
2501    LogFile "INFO: what is now in $mountpoint"
2502    ls -alR $mountpoint >> $LOGFILE
2503   
2504    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2505    for f in $tgz_dir_fname/*; do 
2506        if [ ! -r $f ]; then
2507            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2508        else
2509            cp -Rdf $f . 2>&1 >> $LOGFILE
2510        fi
2511    done
2512    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2513    ln -sf usr/sbin/init linuxrc
2514
2515    cd dev || Die "Can't cd to dev"
2516    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2517    rm -f dev-entries.tgz
2518    cd ..
2519
2520    for w in insmod.static insmod.static.old ; do
2521        s=`which $w 2> /dev/null`
2522        if [ -e "$s" ] ; then
2523            tar cf - -C / $s 2> /dev/null | tar xf -
2524        fi
2525    done
2526
2527    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2528   
2529    # Copy of files mandatory for ssh to automate mount if sshfs is used
2530    mkdir $mountpoint/.ssh $mountpoint/tmp
2531    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2532    cat > $mountpoint/tmp/myssh << EOF
2533ssh -o StrictHostKeyChecking=no $*
2534EOF
2535    chmod 755 $mountpoint/tmp/myssh
2536
2537    # Copy of files mandatory for ld.so
2538    cp -a /etc/ld.so.c* $mountpoint/etc
2539
2540    # Handle the case where busybox and mount are dynamically linked
2541    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2542    if [ $? -eq 0 ]; then
2543        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2544        rm -f bin/mount
2545    fi
2546
2547    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2548    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2549    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2550        if [ -r $f ]; then
2551            echo $f >> $MINDI_TMP/minimal.lis
2552            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2553        fi
2554    done
2555    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2556        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2557    done
2558    # Initial / are trucated by tar
2559    finallist=""
2560    # Remove directories from the list, as tar/cp will create them anyway
2561    # and it may hurt if /lib is in it as on Debian/Ubuntu
2562    # recent bash says that -d is true for a link to a dir !
2563    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2564        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2565            finallist="$finallist $f"
2566        fi
2567    done
2568    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2569    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2570    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2571
2572    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2573    ln -sf /bin/bash bin/sh
2574    LogIt "INFO: Using bash as default shell"
2575    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2576
2577    # Avoids an issue on some distro (RHEL5)
2578    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2579
2580    mkdir -p $mountpoint/tmp
2581    # Management of udev (which includes modprobe in rules)
2582    ps auxww | grep -v grep | grep -qw udevd
2583    if [ $? -eq 0 ]; then
2584        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2585        LogIt "INFO: udev device manager found"
2586        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2587        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2588        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2589        # Do not do it if it's a link (Ubuntu 64 bits #503)
2590        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2591            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2592        fi
2593        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2594            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2595        fi
2596        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2597            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2598        fi
2599        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2600            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2601        fi
2602        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2603            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2604            lis=""
2605            # Get only the files which exist in that list
2606            # and potentially their symlink structure
2607            for i in $lis2; do
2608                if [ -h $i ]; then
2609                    j=$i
2610                    while [ -h $j ]; do
2611                        lis="$lis $j"
2612                        j=`readlink -f $j`
2613                    done
2614                    lis="$lis $j"
2615                elif [ -f $i ]; then
2616                    lis="$lis $i"
2617                fi
2618            done
2619            # And their deps
2620            LocateDeps $lis > $MINDI_TMP/udev.lis
2621            for i in $lis; do
2622                if [ "`echo $i | cut -c1`" = "/" ]; then
2623                    j=`echo $i | cut -c2-`
2624                    [ "$j" != "" ] && rm -f $j
2625                fi
2626                echo "$i" >> $MINDI_TMP/udev.lis
2627            done
2628            finallist=""
2629            # Remove directories from the list, as tar/cp will create them anyway
2630            # and it may hurt if /lib is in it as on Debian/Ubuntu
2631            # recent bash says that -d is true for a link to a dir !
2632            for f in `sort -u $MINDI_TMP/udev.lis`; do
2633                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2634                    finallist="$finallist $f"
2635                fi
2636            done
2637            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2638            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2639            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2640            rm -f $MINDI_TMP/udev.lis
2641        else
2642            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2643            LogAll "         mindi will use static devices which may cause problems"
2644            rm -f $mountpoint/tmp/USE-UDEV
2645        fi
2646    fi
2647
2648    # Management of potential HW info (ProLiant only at the moment)
2649    rm -rf $MINDI_CACHE/bkphw
2650    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2651    if [ -d $MINDI_CACHE/bkphw ]; then
2652        LogIt "INFO: Hardware Information found and saved ..."
2653        cp -rp $MINDI_CACHE/bkphw .
2654        if [ -f $MINDI_CACHE/tools.files ]; then
2655            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2656            LocateDeps $lis > $MINDI_TMP/tools.lis
2657            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2658        fi
2659        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2660            mv -f $MINDI_CACHE/mindi-rsthw .
2661            chmod 755 ./mindi-rsthw
2662        fi
2663        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2664    fi
2665
2666    # Management of perl scripts delivered needed at restore time
2667    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2668    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2669
2670    for w in cdrom groovy-stuff ; do
2671        mkdir -p mnt/$w
2672    done
2673
2674    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2675
2676    echo -en "..."
2677    cd /
2678
2679    needed_modules=""
2680    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2681
2682    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2683        # For PXE boot
2684        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2685    fi
2686    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2687        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2688    fi
2689    for i in $DENY_MODS; do
2690        LogFile "INFO: Removing $i from the list of modules to load"
2691        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2692    done
2693
2694    if [ "${kernelname}" != "" ]; then
2695        needed_modules_path=lib/modules/${kernelname}
2696        mkgmopt="-k ${kernelname}"
2697    else
2698        needed_modules_path=lib/modules/$KERVERRUN
2699        mkgmopt="-k $KERVERRUN"
2700    fi
2701
2702    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2703    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2704
2705    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2706    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2707
2708    # Uncompress modules if not using udev and native modprobe
2709    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2710        for i in $needed_modules; do
2711            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2712                gunzip -f $mountpoint/$i
2713            fi
2714            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2715                bunzip2 -f $mountpoint/$i
2716            fi
2717            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2718                unxz -f $mountpoint/$i
2719            fi
2720            LogFile "INFO: Uncompressing $i"
2721        done
2722    fi
2723
2724    # Also copy modules.* in case of udev so that normal modprobe works
2725    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2726
2727    # Copy FW in case some drivers needs it
2728    for d in "/lib" "/usr/lib"; do
2729        if [ -d "$d/firmware" -a ! -h $d ]; then
2730            cp -a "$d/firmware" "$mountpoint/$d"
2731        fi
2732    done
2733
2734    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2735    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2736        if [ -d "$d/multipath" -a ! -h $d ]; then
2737            cp -a "$d/multipath" "$mountpoint/$d"
2738        fi
2739    done
2740
2741    # Copy an additional ProLiant tool for OBDR support
2742    if [ -f $MINDI_TMP/OBDR ]; then
2743        found=0
2744        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2745            mkdir -p $mountpoint/usr/bin
2746            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2747            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2748            found=1
2749        fi
2750        if [ -x /usr/bin/sg_wr_mode ]; then
2751            mkdir -p $mountpoint/usr/bin
2752            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2753            LocateDeps $lis > $MINDI_TMP/obdr.lis
2754            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2755            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2756            found=1
2757        fi
2758        if [ $found -eq 0 ]; then
2759            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2760            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2761        fi
2762    fi
2763
2764    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2765        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2766        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2767        rm -f $mountpoint/sbin/devfsd
2768    fi
2769    cd "$old_pwd"
2770    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2771    if [ _"$MONDO_SHARE" != _"" ]; then
2772        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2773        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2774        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2775        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2776        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2777        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2778        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2779        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2780        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2781    fi
2782    mkdir -p $mountpoint/proc
2783    LogFile "---------------------------"
2784    LogFile "Content of initial ramdisk:"
2785    LogFile "---------------------------"
2786    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2787    LogFile "---------------------------"
2788
2789    # Determine what filesystem to use for initrd image
2790    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2791    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2792    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2793    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2794        # say what will be used
2795        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2796        # kernel expects linuxrc in ext2 filesystem
2797        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2798        # unmount loop filesystem and create image file using the standard approach
2799        umount $mountpoint || Die "Cannot unmount $tempfile"
2800        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2801        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2802            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2803        else
2804            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2805        fi
2806        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2807        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2808        rm -f ${rdz_fname}.tmp
2809        # log that we are done
2810        LogFile "      ...done."
2811    elif [ "$gvFileSystem" = "initramfs" ]; then
2812        # say what will be used
2813        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2814        # make sure that cpio is there
2815        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2816        # go into filesystem
2817        cd "$mountpoint"
2818        # kernel expects init in cpio filesystem
2819        ln -sf sbin/init init
2820        # create cpio image file and unmount loop filesystem
2821        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2822        cd "$old_pwd"
2823        umount $mountpoint || Die "Cannot unmount $tempfile"
2824        # log that we are done
2825        LogFile "      ...done."
2826    else
2827        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2828    fi
2829
2830    if [ "$res" -eq "0" ] ; then
2831        echo -en "..."
2832    else
2833        echo -en "\rMade an rdz WITH ERRORS.           \n"
2834    fi
2835    return 0
2836}
2837
2838
2839##############################################################################
2840#----------------------------------- Main -----------------------------------#
2841##############################################################################
2842
2843# Now we can create what we need
2844mkdir -p $MINDI_TMP
2845
2846# Purge from potential old run
2847if [ _"$MINDI_CACHE" = _"" ]; then
2848    Die "MINDI_CACHE undefined"
2849fi
2850
2851# --nolog needs to be first, and is used in analyze-my-lvm
2852if [ "$1" = "--nolog" ] ; then
2853    shift
2854    LOGFILE=/dev/stderr
2855else
2856    > $LOGFILE
2857fi
2858if [ "$1" = "--printvar" ] ; then
2859    shift
2860    if [ _"$1" != _"" ] ; then
2861        set | grep -Ew "^$1" | cut -d= -f2
2862    fi
2863    exit 0
2864fi
2865
2866LogFile "mindi v$MINDI_VERSION"
2867LogFile "$ARCH architecture detected"
2868LogFile "mindi called with the following arguments:"
2869echo "$@">> $LOGFILE
2870LogFile "Start date : `date`"
2871LogFile "-----------------------------"
2872
2873[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2874
2875# Log some capital variables
2876[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2877[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2878LogFile "MONDO_SHARE = $MONDO_SHARE"
2879LogFile "MINDI_LIB = $MINDI_LIB"
2880LogFile "MINDI_SBIN = $MINDI_SBIN"
2881LogFile "MINDI_CONF = $MINDI_CONF"
2882if [ -f $MINDI_CONFIG ]; then
2883    LogFile "-----------------------------"
2884    LogFile " Mindi configuration file    "
2885    LogFile "-----------------------------"
2886    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2887    LogFile "-----------------------------"
2888fi
2889LogFile "In Mindi"
2890LogFile "--------"
2891LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2892LogFile "BOOT_SIZE = $BOOT_SIZE"
2893LogFile "--------"
2894
2895trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2896
2897# Sanity checks
2898which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2899which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2900which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2901which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2902if which awk &> /dev/null ; then
2903    if ! which gawk &> /dev/null ; then
2904        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2905    fi
2906fi
2907which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2908[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2909
2910[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2911
2912# Update the PATH variable if incomplete
2913if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2914    PATH=$PATH:/sbin:/usr/sbin
2915    export PATH
2916    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2917    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2918    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2919fi
2920
2921if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2922    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2923fi
2924
2925### TODO
2926### Fix as it's not mandatory on ia64
2927if [ "$ARCH" = "ia64" ] ; then
2928    if which elilo &> /dev/null ; then
2929        LILO_EXE=elilo
2930    else
2931        LILO_EXE=`which false 2> /dev/null`
2932    fi
2933else
2934    FindIsolinuxBinary
2935fi
2936trap "Aborted" SIGTERM
2937DONE="\r\t\t\t\t\t\t\t\tDone.         "
2938kernelpath=""
2939MONDO_ROOT=/var/cache/mondo
2940mkdir -p $MONDO_ROOT
2941
2942if [ -d "/proc/lvm" ]; then
2943    # LVM v1
2944    LVMCMD=""
2945    LVM="v1"
2946elif [ -d "/dev/mapper" ]; then
2947    # LVM v2
2948    LVMCMD="lvm"
2949    LVM="v2"
2950else
2951    LVM="false"
2952fi
2953
2954if [ -e "/proc/cmdline" ]; then
2955    CMDLINE="/proc/cmdline"
2956elif [ -e "/tmp/cmdline" ]; then
2957    CMDLINE="/tmp/cmdline"
2958else
2959    CMDLINE="/dev/null"
2960fi
2961
2962LogFile "INFO: LVM set to $LVM"
2963LogFile "----------"
2964LogFile "mount result:"
2965LogFile "-------------"
2966mount >> $LOGFILE
2967if [ -e /etc/raidtab ]; then
2968    LogFile "-------------"
2969    LogFile "/etc/raidtab content:"
2970    LogFile "-------------"
2971    cat /etc/raidtab >> $LOGFILE
2972else
2973    LogFile "No file /etc/raidtab"
2974fi
2975if [ -e /etc/mdadm.conf ]; then
2976    LogFile "-------------"
2977    LogFile "/etc/mdadm.conf content:"
2978    LogFile "-------------"
2979    cat /etc/mdadm.conf >> $LOGFILE
2980else
2981    LogFile "-------------"
2982    LogFile "No file /etc/mdadm.conf"
2983fi
2984LogFile "-------------"
2985LogFile "cat $CMDLINE"
2986LogFile "-------------"
2987cat $CMDLINE >> $LOGFILE
2988LogFile "-------------"
2989LogFile "cat /proc/swaps:"
2990LogFile "-------------"
2991cat /proc/swaps >> $LOGFILE
2992LogFile "-------------"
2993if [ -e /proc/mdstat ]; then
2994    LogFile "cat /proc/mdstat:"
2995    LogFile "-------------"
2996    cat /proc/mdstat >> $LOGFILE
2997else
2998    LogFile "No pseudo file /proc/mdstat"
2999fi
3000LogFile "-------------"
3001LogFile "cat /proc/partitions:"
3002LogFile "-------------"
3003cat /proc/partitions >> $LOGFILE
3004LogFile "-------------"
3005LogFile "cat /proc/filesystems:"
3006LogFile "-------------"
3007cat /proc/filesystems >> $LOGFILE
3008LogFile "-------------"
3009LogFile "lsmod result:"
3010LogFile "-------------"
3011lsmod >> $LOGFILE
3012MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3013if [ -x /usr/sbin/esxcfg-module ]; then
3014    LogFile "-------------"
3015    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3016    LogFile "-------------"
3017    LogFile "VMWare modules"
3018    LogFile "-------------"
3019    /usr/sbin/esxcfg-module -l >> $LOGFILE
3020    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3021fi
3022LogFile "-------------" 
3023LogFile "FORCE_MODS:"
3024LogFile "-------------"
3025LogFile "$FORCE_MODS"
3026LogFile "-------------"
3027LogFile "DENY_MODS:"
3028LogFile "-------------"
3029LogFile "$DENY_MODS"
3030LogFile "-------------"
3031LogFile "df result:"
3032LogFile "----------"
3033df -aT >> $LOGFILE
3034LogFile "-------------"
3035LogFile "df -i result:"
3036LogFile "----------"
3037df -i >> $LOGFILE
3038LogFile "-------------"
3039if [ -r /boot/grub/menu.lst ]; then
3040    LogFile "-------------"
3041    LogFile "INFO: /boot/grub/menu.lst content"
3042    LogFile "-------------"
3043    cat /boot/grub/menu.lst >> $LOGFILE
3044    LogFile "-------------"
3045fi
3046if [ -r /boot/grub/grub.conf ]; then
3047    LogFile "-------------"
3048    LogFile "INFO: /boot/grub/grub.conf content"
3049    LogFile "-------------"
3050    cat /boot/grub/grub.conf >> $LOGFILE
3051    LogFile "-------------"
3052fi
3053if [ -r /boot/grub/grub.cfg ]; then
3054    LogFile "-------------"
3055    LogFile "INFO: /boot/grub/grub.cfg content"
3056    LogFile "-------------"
3057    cat /boot/grub/grub.cfg >> $LOGFILE
3058    LogFile "-------------"
3059fi
3060if [ -r /boot/grub/device.map ]; then
3061    LogFile "-------------"
3062    LogFile "INFO: /boot/grub/device.map content"
3063    LogFile "-------------"
3064    cat /boot/grub/device.map >> $LOGFILE
3065    LogFile "-------------"
3066fi
3067if [ -r /etc/lilo.conf ]; then
3068    LogFile "-------------"
3069    LogFile "INFO: /etc/lilo.conf content"
3070    LogFile "-------------"
3071    cat /etc/lilo.conf >> $LOGFILE
3072fi
3073LogFile "Full fdisk info"
3074LogFile "---------------"
3075$FDISK -l >> $LOGFILE
3076LogFile "----------------"
3077LogFile "List of extra modules is:"
3078LogFile "$EXTRA_MODS"
3079LogFile "-------------"
3080
3081# Compute libata version
3082laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3083# If libata v2 is used then remove ide-generic as it will perturbate boot
3084if [ "`echo $MODULES | grep libata`" ]; then
3085    if [ "$laver" = "2" ]; then
3086        DENY_MODS="$DENY_MODS ide-generic"
3087        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3088        LogFile "-------------"
3089    fi
3090fi
3091
3092# Check for McAfee which disturbs the access to some files (tgz in articular)
3093if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3094    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3095    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3096    LogFile "WARNING: You have two options:"
3097    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3098    LogFile "WARNING:  - Disable the scanner during the backup"
3099fi
3100
3101# Check for ISO_CMD command
3102if [ ! -x $ISO_CMD ]; then
3103    LogFile "NOTE: No CD image (ISO file) utility found"
3104fi
3105
3106FLOPPY_WAS_MOUNTED=""
3107for mtpt in /media/floppy /mnt/floppy /floppy ; do
3108    if mount | grep -w $mtpt &> /dev/null ; then
3109        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3110        umount $mtpt
3111    fi
3112done
3113
3114#
3115# If we have a USB device we need to store info
3116# and remove it from the parameters line
3117#
3118if [ "$#" -ne "0" ] ; then
3119    if [ "$1" = "--usb" ] ; then
3120        shift
3121        USBDEVICE=$1
3122        if [ _"$USBDEVICE" = _"" ]; then
3123            Die "No USB device specified"
3124        fi
3125        shift
3126    fi
3127fi
3128
3129if [ "$#" -ne "0" ] ; then
3130    if [ "$1" = "--findkernel" ] ; then
3131        resk=`TryToFindKernelPath`
3132        # Avoids logfile content for mondo
3133        export MONDO_SHARE=""
3134        if [ "$resk" = "" ] ; then
3135            if [ $KERNEL_IS_XEN = "yes" ]; then
3136                echo "$xenkernelpath"
3137                LogFile "INFO: xenkernelpath = $xenkernelpath"
3138                MindiExit 0
3139            else
3140                MindiExit -1
3141            fi
3142        else
3143            echo "$resk"
3144            LogFile "INFO: kernelpath = $resk"
3145            MindiExit 0
3146        fi
3147    elif [ "$1" = "--locatedeps" ] ; then
3148        [ ! "$2" ] && Die "Please specify the binary to look at"
3149        LocateDeps $*
3150        # Avoids logfile content for mondo
3151        export MONDO_SHARE=""
3152        MindiExit $?
3153    elif [ "$1" = "--readalllink" ] ; then
3154        [ ! "$2" ] && Die "Please specify the binary to look at"
3155        # Avoids logfile content for mondo
3156        export MONDO_SHARE=""
3157        mr-read-all-link $2
3158        MindiExit $?
3159    elif [ "$1" = "--makemessage" ] ; then
3160        MakeMessageFile | cut -c1-80
3161        MindiExit 0
3162    elif [ "$1" = "--makemountlist" ] ; then
3163        [ ! "$2" ] && Die "Please specify the output file"
3164        MakeMountlist $2
3165        CheckMountlist $2
3166        # Avoids logfile content for mondo
3167        export MONDO_SHARE=""
3168        MindiExit $?
3169    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3170        echo "Mindi v$MINDI_VERSION"
3171        # Avoids logfile content for mondo
3172        export MONDO_SHARE=""
3173        MindiExit 0
3174    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3175        MONDO_TMP=$2
3176        # Change MINDI_TMP for the one provided by mondo
3177        # So that it can get back the built files
3178        if [ _"$MONDO_TMP" = _"" ]; then
3179            Die "MONDO_TMP is empty, aborting"
3180        fi
3181        if [ _"$MONDO_TMP" = _"/" ]; then
3182            Die "MONDO_TMP is /, aborting"
3183        fi
3184        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3185        rmdir $MINDI_TMP
3186        export MINDI_TMP=$MONDO_TMP
3187        mkdir -p $MINDI_TMP
3188
3189        # This is the scratch dir in mondo - subdir images
3190        MINDI_CACHE=$3
3191
3192        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3193        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3194       
3195###
3196### Sq-Modification...
3197### Attempt to locate kernel specific module path
3198### if module path is found then use it other wise use uname -r to set it...
3199###
3200        if [ $KERNEL_IS_XEN = "yes" ]; then
3201            LogAll "INFO: xenkernelpath = $xenkernelpath"
3202        fi
3203        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3204        if [ ! -d "/lib/modules/$kernelname" ]; then
3205           LogAll "WARNING: Module path for ${kernelpath} not found..."
3206           LogAll "         using running kernel\'s modules."
3207           kernelname=$KERVERRUN
3208        else
3209           LogAll "Using modules for kernel: ${kernelname}"
3210        fi
3211        LogAll "INFO: kernelname = $kernelname"
3212        LogAll "INFO: kernelpath = $kernelpath"
3213###
3214### end of Sq-Modification
3215###
3216        TAPEDEV=$5
3217        TAPESIZE=$6
3218        FILES_IN_FILELIST=$7
3219        USE_LZO=$8
3220        CDRECOVERY=$9
3221        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3222            IMAGE_DEVS=""
3223        else
3224            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3225        fi
3226        if [ "${11}" ] ; then
3227            LILO_OPTIONS=""
3228    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3229        fi
3230        LAST_FILELIST_NUMBER=${12}
3231        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3232        export MINDI_EXCLUDE_DEVS="${14}"
3233        USE_COMP="${15}"
3234        USE_LILO="${16}"
3235        USE_STAR="${17}"
3236        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3237        DIFFERENTIAL="${19}"
3238        USE_GZIP="${20}"
3239        NOT_BOOT="${21}"
3240        [ "$USE_COMP" = "" ] && USE_COMP=yes
3241        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3242        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3243        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3244        # MONDO_ROOT is the real scratchdir
3245        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3246        if [ _"$MONDO_ROOT" != _"" ]; then
3247            mkdir -p $MONDO_ROOT
3248        else
3249            Die "MONDO_ROOT is undefined"
3250        fi
3251    else
3252        LogScreen "Syntax: mindi (--custom ....)"
3253        MindiExit -1
3254    fi
3255fi
3256
3257if [ _"$MINDI_CACHE" != _"" ]; then
3258    rm -rf $MINDI_CACHE/* 2> /dev/null
3259    mkdir -p $MINDI_CACHE
3260fi
3261
3262[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3263
3264if [ _"$MONDO_SHARE" = _"" ]; then
3265    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3266    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3267    LogIt "BusyBox sources are available from http://www.busybox.net"
3268    LogIt "------------------------------------------------------------------------------"
3269else
3270    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3271fi
3272if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3273    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3274else
3275    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3276    MindiExit -1
3277fi
3278
3279for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3280    modinfo $i 2> /dev/null 1> /dev/null
3281    if [ $? -eq 0 ]; then
3282        modprobe $i 2>&1 > /dev/null
3283    fi
3284done
3285
3286KERN_DISK_MADE=""
3287
3288LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3289LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3290LogFile "NOT_BOOT = '$NOT_BOOT'"
3291if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3292    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3293    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3294    MakeMountlist $MINDI_TMP/mountlist.txt
3295    CheckMountlist $MINDI_TMP/mountlist.txt
3296    mkdir -p $MINDI_TMP/small-all/tmp
3297    cd "$MINDI_TMP/small-all"
3298    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3299    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3300    sleep 2
3301    LogIt "Done. Exiting."
3302    MindiExit 0
3303fi
3304
3305if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3306    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3307fi
3308
3309if [ "$kernelpath" = "" ] ; then
3310    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3311    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3312    read ch
3313    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3314        USE_OWN_KERNEL="yes"
3315    else
3316        USE_OWN_KERNEL="no"
3317    fi
3318    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3319        kernelpath=`TryToFindKernelPath`
3320        if [ "$kernelpath" = "" ] ; then
3321            echo -n "Please enter kernel path : "
3322            read kernelpath
3323        fi
3324    fi
3325fi
3326
3327echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3328[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3329
3330mountpoint=$MINDI_TMP/mountpoint.$$
3331PrepareDataDiskImages
3332
3333ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3334rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3335export ramdisk_size=$rds
3336
3337LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3338if [ "$ARCH" = "ia64" ] ; then
3339    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3340else
3341    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3342fi
3343
3344[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3345...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3346
3347if [ _"$MONDO_SHARE" = _"" ]; then
3348    ListImagesForUser
3349    OfferToMakeBootableISO
3350    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3351        OfferToMakeBootableUSB
3352    fi
3353    LogAll "Finished."
3354elif [ "$TAPEDEV" ] ; then
3355    if [ "$ARCH" != "ia64" ] ; then
3356        # We need to keep the img file as boot file for ia64 platform
3357        rm -f $MINDI_CACHE/{*img,*iso}
3358    else
3359        rm -f $MINDI_CACHE/*iso
3360    fi
3361    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3362        OfferToMakeBootableUSB
3363    fi
3364    OfferToMakeBootableISO
3365    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3366        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3367    else
3368        Die "Cannot find all.tar.gz, to be written to tape"
3369    fi
3370elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3371    OfferToMakeBootableUSB
3372else
3373    OfferToMakeBootableISO
3374fi
3375# cleanup
3376LogAll "INFO: $FRIENDLY_OUTSTRING"
3377for mtpt in $FLOPPY_WAS_MOUNTED ; do
3378    mount $mtpt
3379done
3380MindiExit 0
Note: See TracBrowser for help on using the repository browser.