source: MondoRescue/branches/3.2/mindi/mindi@ 3201

Last change on this file since 3201 was 3201, checked in by Bruno Cornec, 10 years ago
  • Last update for travel
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3201 2013-11-28 12:11:13Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000 # increase if you run out of ramdisk space
42BOOT_SIZE=65600 # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45 # Ask if you want to make a CD Image to be written?
46 # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49 # Ask if you want to make a USB Image to be written?
50 # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53 # If set to "no", you will be prompted for whether or not
54 # you want to use your own kernel, or the supplied default.
55 # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58 # If set to "no", the kernel is not a Xen kernel
59 # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci-hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107 . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119 ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125 if [ -e /dev/stderr ] ; then
126 echo -e "$1" >> /dev/stderr
127 elif [ -e /usr/bin/logger ] ; then
128 /usr/bin/logger -s $1
129 fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135 echo -e "$1" >> $LOGFILE
136 if [ _"$2" != _"" ]; then
137 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138 fi
139 rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144 LogScreen "$1"
145 LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150 LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157 LogFile "Mindi $MINDI_VERSION is exiting"
158 LogFile "End date : `date`"
159 if [ _"$MONDO_SHARE" != _"" ] ; then
160 echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161 if [ -f $LOGFILE ]; then
162 cat $LOGFILE >> /var/log/mondoarchive.log
163 else
164 echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
165 fi
166 echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167 fi
168
169 cd /
170 sync&
171
172 # Clean temporary files only when standalone mindi
173 if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174 rm -Rf $MINDI_TMP
175 fi
176 exit $1
177}
178
179Die() {
180 local i
181 if [ "$1" = "" ] ; then
182 LogAll "FATAL ERROR"
183 else
184 LogAll "FATAL ERROR. $1"
185 fi
186 if [ _"$2" != _"" ]; then
187 grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188 fi
189 rm -f "$2"
190
191 LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192 LogAll "See http://www.mondorescue.org for more information."
193 LogAll "WE CANNOT HELP unless you enclose that file.\n"
194 MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200 df $TMPDIR
201 Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204 Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207 Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215 [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216 Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221 trap SIGHUP SIGTERM SIGTRAP SIGINT
222 [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223 [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224 Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229 [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234 local mappath r included_list included_item i res ii sss
235 mappath=$1
236 KBDEPTH=$(($KBDEPTH+1))
237 [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238 if [ -e "$bigdir/$mappath" ] ; then
239 LogFile "INFO: $mappath already added"
240 return
241 elif [ -d "$bigdir/$mappath" ] ; then
242 echo "Cannot add $mappath: it's a directory. Sorry."
243 return
244 fi
245 LogFile "INFO: Added kbd map $mappath"
246 if [ ! -e "$mappath" ] ; then
247 mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248 if [ ! -e "$mappath" ] ; then
249 LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250 return
251 fi
252 else
253 echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254 fi
255
256 tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257 if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258 included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259 else
260 included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261 fi
262 for included_item in $included_list ; do
263 if [ ! -e "$included_item" ] ; then
264 sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265 [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266 for ii in $sss ; do
267 [ -e "$ii" ] && AddKeyboardMappingFile $ii
268 done
269 else
270 AddKeyboardMappingFile $included_item
271 fi
272 done
273}
274
275
276CopyDependenciesToDirectory() {
277 local outdir incoming counter d found tdir
278 outdir=$1
279 mkdir -p $outdir
280 incoming=`ReadLine`
281 counter=0
282 while [ "$incoming" != "" ] ; do
283 # Non absolute file names should not arrive till here => skipped
284 if [ `echo "$incoming" | cut -c1` != '/' ]; then
285 LogAll "WARNING: Unable to handle $incoming"
286 incoming=`ReadLine`
287 continue
288 fi
289 # no parent directory of incoming should be a link, copy is not possible in that case
290 d=`dirname "$incoming"`
291 found="false"
292 while [ $d != "/" -a $found = "false" ]; do
293 [ -h "$d" ] && found="true"
294 d=`dirname "$d"`
295 done
296 if [ -d "$incoming" -a ! -h "$incoming" ]; then
297 find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298 elif [ -e "$incoming" ] && [ $found = "false" ]; then
299 if [ ! -h "$incoming" ]; then
300 tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301 else
302 tdir=`dirname "$incoming"`
303 if [ ! -e "$outdir/$tdir" ]; then
304 mkdir -p "$outdir/$tdir"
305 fi
306 cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307 fi
308 # Only uncompress modules if not using udevd
309 if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310 gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311 fi
312 [ -x "$outdir" ] && StripExecutable $outdir
313 counter=$(($counter+1))
314 LogProgress $counter $2
315 fi
316 incoming=`ReadLine`
317 done
318}
319
320
321CountItemsIn() {
322 local r
323 r=0
324 for q in $1 ; do
325 r=$(($r+1))
326 done
327 echo $r
328}
329
330
331DropOptimizedLibraries() {
332 local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333 filelist=$1
334 outdir=$2
335
336 list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337 if [ "$list_of_optimized_libraries" = "" ] ; then
338 return 0
339 fi
340 echo -en "Dropping i686-optimized libraries if appropriate"
341 for optimized_lib_name in $list_of_optimized_libraries ; do
342 echo -en "."
343 reason=""
344 vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345 echo "$vanilla_lib_name" >> $filelist
346 LogFile "INFO: Adding $vanilla_lib_name to filelist"
347 mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348 rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350 # This may return multiple files
351 for resolved in `ReadAllLink $vanilla_lib_name`; do
352 LogFile "INFO: Adding as deps $resolved to filelist"
353 vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354 if [ "$vanilla_resolved_name" != "$resolved" ]; then
355 mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356 rmdir $outdir$resolved > /dev/null 2> /dev/null
357 ln -sf $vanilla_resolved_name $outdir$resolved
358 LogFile "INFO: Excluding deps $resolved"
359 grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360 LogFile "INFO: Replacing it with $vanilla_resolved_name"
361 echo "$vanilla_resolved_name" >> $filelist.tmp
362 mv -f $filelist.tmp $filelist
363 fi
364 done
365 done
366 $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367 mv -f $filelist.tmp $filelist
368 echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373 local r res mapfile mappath included_item included_list keyfile mp locale
374 LogAll "INFO: Analyzing your keyboard's configuration."
375 KEYDIR=/lib/kbd
376 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
377 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378 [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379 [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381 [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382 if [ ! -e "$KEYDIR" ] ; then
383 LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
384 return 0
385 fi
386 if [ -e "/etc/sysconfig/keyboard" ] ; then
387 LogFile "INFO: Red Hat-style config detected."
388 keyfile=/etc/sysconfig/keyboard
389 elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390 LogFile "INFO: Slackware-style config detected."
391 keyfile=/etc/rc.d/rc.keymap
392 elif [ -e "/etc/rc.config" ] ; then
393 LogFile "INFO: Debian-style config detected."
394 keyfile=/etc/rc.config
395 elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396 LogFile "INFO: Debian-style config detected."
397 mkdir -p $bigdir/tmp
398 echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
399 KBDEPTH=0
400 mkdir -p $bigdir/etc/console
401 cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402 echo ""
403 echo -e "$DONE"
404 return 0
405 elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406 LogFile "INFO: Ubuntu-style config detected."
407 mkdir -p $bigdir/tmp
408 if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409 kbdfile="/etc/console-setup/boottime.kmap.gz"
410 else
411 kbdfile="/etc/console-setup/cached.kmap.gz"
412 fi
413 echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
414 KBDEPTH=0
415 mkdir -p $bigdir/etc/console-setup
416 cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417 echo ""
418 echo -e "$DONE"
419 return 0
420 elif [ -e "/etc/rc.conf" ] ; then
421 LogFile "INFO: ArchLinux config detected."
422 keyfile=/etc/rc.conf
423 elif [ -e "/etc/conf.d/keymaps" ] ; then
424 LogFile "INFO: Gentoo-style config detected."
425 keyfile=/etc/conf.d/keymaps
426 elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427 LogFile "INFO: X11-style config detected."
428 keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429 else
430 LogFile "Searching for rc.config ..."
431 keyfile=`find /etc -name rc.config | head -n1`
432 if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433 LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434 return
435 else
436 LogFile "INFO: Found $keyfile"
437 fi
438 fi
439 if [ ! -e "$KEYDIR/keymaps" ] ; then
440 LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441 return
442 fi
443 LogFile "INFO: keyfile=$keyfile"
444 # For SLES we need to remove the .map.gz extension Cf #614
445 locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446 [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
447 [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo & ArchLinux
448 [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
449 LogFile "INFO: locale=$locale"
450 #
451 # Process the keymaps dir once for all
452 # AddKeyboardMappingFile will use it recursively
453 #
454 find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455 mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456 [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457 # If we have multiple keymaps then log it !!
458 echo "$mp" | grep -q " " >> $LOGFILE
459 if [ $? -eq 0 ]; then
460 LogAll "WARNING: Multiple keymaps found: $mp"
461 LogFile "INFO: The following one will be used"
462 fi
463 for i in $mp ; do
464 mappath=$i
465 [ -e "$i" ] && [ ! -d "$i" ] && break
466 done
467 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468 mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469 fi
470 LogFile "INFO: mappath = $mappath"
471 if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472 LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473 return
474 fi
475 LogAll "INFO: Adding the following keyboard mapping tables: "
476 mkdir -p $bigdir/tmp
477 echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
478 KBDEPTH=0
479 AddKeyboardMappingFile $mappath
480 echo ""
481 echo -e "$DONE"
482 rm -f $MINDI_TMP/keymaps.find
483 return 0
484}
485
486
487FindMboot32Binary() {
488 MBOOTC32=/usr/lib/syslinux/mboot.c32
489 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
490 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
491 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
492 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
493 [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
494 [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
495 [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
496 LogFile "INFO: Found mboot.c32 at $MBOOTC32"
497}
498
499FindIsolinuxBinary() {
500 ISOLINUX=/usr/lib/isolinux.bin
501 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
502 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
503 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
504 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
505 [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
506 [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
507 [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
508 LogFile "INFO: Found isolinux.bin at $ISOLINUX"
509}
510
511
512FindSpecificModuleInPath() {
513 local modpaths pwd line
514 pwd=`pwd`
515 if [ "$YOUR_KERNEL_SUCKS" ] ; then
516 cd "$MINDI_TMP"
517 else
518 cd /
519 fi
520 if [ ! -e "$1" ] ; then
521 LogAll "WARNING: cannot search specific path '$1'"
522 return 1
523 fi
524 # Find all files and links (required for some VMWare VMs)
525 modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
526 echo "$modpaths"
527 cd "$pwd"
528}
529
530
531GenerateGiantDependencyList() {
532 local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
533
534 echo -en "Analyzing dependency requirements"
535 outfile=$1
536 tempfile=$MINDI_TMP/$$.txt
537 incoming=`ReadLine`
538
539 > $tempfile
540 progress=0
541 res=0
542 noof_lines=$2
543 while [ "$incoming" != "" ] ; do
544 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
545 incoming=`ReadLine`
546 continue
547 fi
548 if [ "$incoming" = "LVMFILES:" ] ; then
549 break
550 fi
551 filelist=`GenerateListForFile "$incoming"`
552 r=$?
553 [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
554 res=$(($res+$r))
555# LogFile "INFO: '$incoming' generates filelist '$filelist'"
556 for fname in $filelist ; do
557 [ "$fname" != "" ] && echo "$fname" >> $tempfile
558 done
559 progress=$(($progress+1))
560 LogProgress $progress $noof_lines
561 incoming=`ReadLine`
562 done
563 if [ "$incoming" = "LVMFILES:" ] ; then
564 incoming=`ReadLine`
565 lvmversion=""
566 while [ "$incoming" != "" ] ; do
567 if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
568 incoming=`ReadLine`
569 continue
570 fi
571 filelist=`GenerateListForFile "$incoming"`
572 for tool in $filelist ; do
573 lvmresolved=`readlink -f $tool`
574 if [ "$tool" = "$lvmresolved" ]; then
575 echo "$tool" >> $tempfile
576 elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
577 if [ "$lvmversion" = "" ] ; then
578 lvmversion=`$lvmresolved`
579 echo "$lvmresolved" >> $tempfile
580 fi
581 toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
582 if [ "$lvmversion" = "200" ]; then
583 # pvdata and lvmcreate_initrd don't exist in LVM2
584 case "$toolstripped" in
585 "pvdata")
586 continue
587 ;;
588 "lvmcreate_initrd")
589 continue
590 ;;
591 esac
592 fi
593 toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
594 if [ -e "$toolpath" ] ; then
595 echo "$toolpath" >> $tempfile
596 echo "$tool" >> $tempfile
597 else
598 toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
599 fi
600 if [ -e "$toolpath" ] ; then
601 echo "$toolpath" >> $tempfile
602 echo "$tool" >> $tempfile
603 else
604 echo "Where are your LVM-Tools? Couldn't find $tool"
605 fi
606 else
607 echo "$tool" >> $tempfile
608 fi
609 done
610 progress=$(($progress+1))
611 LogProgress $progress $noof_lines
612 incoming=`ReadLine`
613 done
614 fi
615 echo -en "$DONE\nMaking complete dependency list"
616
617 tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
618 mv -f $tempfile.new $tempfile
619 > $outfile.pre
620 progress=0
621 noof_lines=`cat $tempfile | wc -l`
622 LogFile "---------------------------------"
623 LogFile "List of dependencies: "
624 LogFile "---------------------------------"
625 for fname in `cat $tempfile` ; do
626 echo "$fname" | tee -a $LOGFILE >> $outfile.pre
627 LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
628 progress=$(($progress+1))
629 LogProgress $progress $noof_lines
630 done
631 if [ _"$MONDO_SHARE" != _"" ]; then
632 mkdir -p $bigdir/tmp
633 mkdir -p $bigdir/usr/bin
634 if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
635 LogAll "\nINFO: Incorporating post-nuke tarball"
636 old_pwd=`pwd`
637 cd "$bigdir"
638 tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
639 cd "$old_pwd"
640 fi
641 if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
642 LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
643 else
644 LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
645 LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
646 LogIt " If Mindi was called by Mondo then send me a bug report."
647 LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
648 LogIt " Finally, run Mindi again."
649 Die "Odd."
650 fi
651 cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
652 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
653 LogAll "\nINFO: Incorporating Network-related settings"
654 for r in NETFS-* ISO-PREFIX ; do
655 cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
656 LogFile "INFO: Copying $r to ramdisk"
657 done
658 fi
659 fi
660 tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
661 rm -f $tempfile $outfile.pre
662 [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
663 return $res
664}
665
666
667GenerateListForFile() {
668 local files_found loc fname incoming i res
669 incoming="$1"
670 files_found=""
671 res=0
672
673 for fname in $incoming ; do
674 files_found="$files_found `LocateFile $fname`"
675 done
676
677 echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
678}
679
680
681# Returns all disk devices which are part of a raid array
682GetAllRaidMembers() {
683 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
684}
685
686
687GetFileSizeList() {
688 local i
689 for i in `find $1 -type d -o -print` ; do
690 du -sk $i
691 done
692}
693
694
695# Check kernel filesystem capabilites for accessing initrd image
696# Could be ext2 FS (old mode) or initramfs (new mode)
697#
698# Interface definition:
699# param #1: absolute path to kernel image
700GetInitrdFilesystemToUse() {
701
702 # interface test: make sure we have one parameter
703 if [ $# -ne 1 ]; then
704 Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
705 fi
706
707 # interface parameters
708 local lvKernelImage=$1
709
710 # local constants (filesystem magic strings)
711 local lcMagicCramfs="<3>cramfs: wrong magic"
712 local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
713 local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
714 local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
715
716 # local variables
717 local lvOffset
718 local lvScanRes
719 local lvUseFilesystem
720
721 # say where we are.
722 LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
723
724 # verify that file exists
725 [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
726
727 # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
728 file $lvKernelImage 2>&1 | grep -q gzip
729 if [ $? -eq 0 ]; then
730 LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
731 lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
732 else
733 LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
734 # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
735 # get offet of gzip magic "1f8b0800" in file (for these older kernels)
736 lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
737 if [ $lvOffset -eq 0 ]; then
738 LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
739 lvScanRes=$lcMagicInitfs
740 else
741 lvOffset=`expr $lvOffset / 2`
742 LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
743 # scan again kernel image
744 lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
745 fi
746 fi
747
748 # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
749 if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
750 lvUseFilesystem="ext2fs"
751 elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
752 lvUseFilesystem="ext3fs"
753 elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
754 lvUseFilesystem="initramfs"
755 elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
756 lvUseFilesystem="cramfs"
757 else
758 # In that case, we are most probably after 2.6.30 and use the supported initramfs
759 LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
760 LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
761 LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
762 lvUseFilesystem="initramfs"
763 fi
764
765 # say what we are using
766 LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
767
768 # return file system to use
769 echo "$lvUseFilesystem"
770
771}
772
773# Searches members of raid device
774# $1: raid device (/dev/md...)
775GetRaidDevMembers() {
776 if [ ! -f /etc/raidtab ]; then
777 return
778 fi
779 $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
780}
781
782
783HackPathsToFailsafe() {
784 local incoming newpath stub i pwd
785 incoming=`ReadLine`
786 pwd=`pwd`
787 cd "$MINDI_TMP"
788 while [ "$incoming" != "" ] ; do
789 stub=`basename $incoming`
790 newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
791 for i in $newpath ; do
792 echo "$i"
793 done
794 read incoming
795 done
796 cd "$pwd"
797}
798
799
800ListAllPartitions() {
801 local res currline partition all_partitions ap_orig remaining i j
802
803 grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
804 [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
805 if [ -e "/vmfs/volumes" ]; then
806 # For VMWare ESX 3 get the device names of these volumes
807 vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
808 fi
809 return
810}
811
812
813ListImagesForUser() {
814 local path fname
815 path=$MINDI_CACHE
816 echo -en "In the directory '$path' you will find the images:-\n"
817 for fname in `ls $path | grep -F mindi-` ; do
818 printf "%19s " $fname
819 done
820 echo " "
821}
822
823
824ListKernelModulePaths() {
825 local module_list module fname r kern
826 module_list="$MODULES"
827 # Remove unwanted modules from list
828 for i in $DENY_MODS; do
829 module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
830 EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
831 done
832###
833### Sq-Modification ... Use kernelname for module search path if specified
834###
835 if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
836 then
837 kern=${kernelname}
838 else
839 kern="$KERVERRUN"
840 fi
841 export KERVER=$kern
842###
843### Sq-Mod End
844###
845 # Get rid of duplicates, so that if a live kernel module also appears
846 # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
847 for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
848 r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
849 if [ -z "$r" ]; then
850 if [ "`echo "$MODULES" | grep -w $module`" ]; then
851 r="[live module file not found]"
852 else
853 r="[extra module file not found]"
854 fi
855 else
856 [ -f "$r" ] && echo "$r"
857 fi
858 LogFile "INFO: module $module --> $r"
859 done
860 find /lib/modules/$kern/modules.* -type f 2> /dev/null
861}
862
863#
864# Critical function which computes all dependencies (dyn. lib.)
865# for a list of binaries
866#
867LocateDeps() {
868 local incoming fname deps
869 incoming="$*"
870 for fname in $incoming ; do
871 if [ ! -e "$fname" ] ; then
872 LogFile "WARNING: $fname does not exist; cannot be LDD'd."
873 if echo $fname | grep lvm &> /dev/null ; then
874 LogFile " This warning only affects you if you are using LVM."
875 if echo "$MODULES" | grep lvm &> /dev/null ; then
876 LogFile " I think you are, so please take heed!"
877 else
878 LogFile " I don't think you are, so don't worry about it."
879 fi
880 fi
881 elif [ -h "$fname" ] && [ -x "$fname" ] ; then
882 newf=`readlink -f $fname`
883 LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
884 ldd $newf 2> /dev/null | ProcessLDD
885 else
886 ldd $fname 2> /dev/null | ProcessLDD
887 fi
888 done
889}
890
891
892# Give all symlinks recursively of a full path name
893ReadAllLink() {
894 file="$1"
895
896 while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
897 # We need to normalise the path with .. in it
898 file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
899 done
900 echo "$file"
901 if [ ! -h $file ]; then
902 return 0
903 fi
904
905 link=`readlink $file`
906 d=`dirname $file`
907 # Is link a relative or full path name
908 fchar=`echo $link | cut -c1`
909 # If mother dir is a link print it
910 if [ -h "$d" ]; then
911 echo "$d"
912 echo "$d/`basename $file`"
913 d2=`readlink $d`
914 c2=`echo $d2 | cut -c1`
915 if [ "$c2" != "/" ]; then
916 if [ "$c2" != "." ]; then
917 d="/$d2"
918 else
919 d="$d/$d2"
920 fi
921 fi
922 fi
923 if [ "$fchar" != "/" ]; then
924 # Relative or local link
925 ReadAllLink "$d/$link"
926 else
927 # Absolute path
928 ReadAllLink $link
929 fi
930}
931
932
933LocateFile() {
934 local i path fname_to_find location output resolved tmp stub cache_id loclist
935 fname_to_find="$1"
936 # It's an absolute path
937 if echo "$fname_to_find" | grep -x "/.*" ; then
938 output="$fname_to_find"
939 if [ -h "$output" ] ; then
940 output="`ReadAllLink $output` $output"
941 fi
942 echo "$output"
943 return 0
944 fi
945 # It's not an absolute path
946 output=""
947 for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
948 #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
949 [ -h "$path" ] && continue
950 [ ! -e "$path/$fname_to_find" ] && continue
951 output="$path/$fname_to_find $output"
952 if [ -h "$path/$fname_to_find" ] ; then
953 output="`ReadAllLink $path/$fname_to_find` $output"
954 fi
955 done
956 if [ "$output" = "" ] ; then
957 return 1
958 fi
959 echo "$output"
960 return 0
961}
962
963LogProgress() {
964 local i progress modres noof_lines
965
966 progress=$1
967 noof_lines=$2
968
969 echo -en "\r\t\t\t\t\t\t\t\t"
970 i=$(($progress*100))
971 if [ $noof_lines -ne 0 ]; then
972 i=$(($i/$noof_lines))
973 else
974 i=0
975 fi
976 echo -en "$i"
977 echo -en "%"
978 modres=$(($progress%4))
979 [ "$modres" -eq "0" ] && echo -en "\t/"
980 [ "$modres" -eq "1" ] && echo -en "\t-"
981 [ "$modres" -eq "2" ] && echo -en "\t\\"
982 [ "$modres" -eq "3" ] && echo -en "\t|"
983}
984
985# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
986MakeMondoConfigFile() {
987 local outfile use_lzo use_comp use_star
988 outfile=$1
989 > $outfile
990 [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
991 [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
992 [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
993 [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
994 [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
995 [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
996 use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
997 use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
998 use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
999 use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1000 use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1001 echo "use-lzo $use_lzo" >> $outfile
1002 echo "use-gzip $use_gzip" >> $outfile
1003 echo "use-star $use_star" >> $outfile
1004 echo "use-lzma $use_lzma" >> $outfile
1005 echo "use-comp $use_comp" >> $outfile
1006 echo "datestamp `date`" >> $outfile
1007 [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1008 AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV netfs-dev $outfile
1009 AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO netfs-proto $outfile
1010 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1011 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1012 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1013 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1014 AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW netfs-client-defgw $outfile
1015 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT netfs-server-mount $outfile
1016 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER netfs-server-user $outfile
1017 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH netfs-server-path $outfile
1018 AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1019 AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
1020 AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
1021 AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1022 AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
1023 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1024 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1025 AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
1026 AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1027 AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1028 AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1029 AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1030 AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1031 AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1032 AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
1033}
1034
1035# Get PV's for an LV
1036GetPVsForLV() {
1037 if [ -n "$1" ]; then
1038 vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1039 if [ -z "$vg" ]; then
1040 return
1041 fi
1042 $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1043 fi
1044}
1045
1046
1047MakeMountlist() {
1048 local mountlist all_partitions current_partition \
1049partition_size partition_format outstring partition_number \
1050partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1051absolute_partition old_partition_fmt current_lvolume uname skip
1052
1053 LogFile "------------------------------------"
1054 LogFile "Your raw fstab file looks like this:"
1055 LogFile "------------------------------------"
1056 cat $MY_FSTAB >> $LOGFILE
1057 LogAll "-----------------------------------"
1058 LogAll "Your mountlist will look like this:"
1059 LogAll "-----------------------------------"
1060
1061# mountlist(OUT)
1062 mountlist=$1
1063
1064# NB: partition = device
1065# NB: mountpt = where the device is mounted
1066
1067 [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1068
1069 [ "$mountlist" != "" ] && rm -Rf $mountlist
1070 > $mountlist
1071 all_partitions=""
1072
1073 if [ $LVM != "false" ]; then
1074 LogAll "INFO: Analyzing LVM..."
1075 $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1076 if [ $? -ne 0 ]; then
1077 LVM="false"
1078 fi
1079 # Excluded LVs and GVs are not reported here
1080 all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1081 fi
1082 all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1083 for i in $IMAGE_DEVS ; do
1084 mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1085 done
1086 [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1087 printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1088 printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
1089 useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1090 for c_p in $all_partitions ; do
1091 # Skip fd/cd devices, network FS, cifs
1092 [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1093 [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1094 if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1095 current_partition=`readlink -f $c_p`
1096 if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1097 current_partition="$c_p"
1098 elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1099 # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1100 current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1101 fi
1102 [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1103 else
1104 current_partition="$c_p"
1105 fi
1106 [ "$c_p" = "none" ] && continue
1107 redhat_label=""
1108 label=""
1109 uuid=""
1110 absolute_partition=`readlink -f $c_p`
1111 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1112
1113 # set default in case we dont't find it
1114 str_to_find_fmt_with=$current_partition
1115
1116 # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1117 # current_partition contains only first column of /etc/fstab
1118 if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1119 redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1120 actual_dev=""
1121
1122 # 1st try, findfs - the RHEL way of finding labels and their partitions
1123 if [ -x "/sbin/findfs" ]; then
1124 actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1125 fi
1126
1127 # 2nd try : blkid, the good way for all LABEL except swap
1128 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1129 actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1130 # For LVM FS it will give a /dev/dm-# which should then be converted
1131 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1132 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1133 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1134 for dev in `ls /dev/mapper/*`; do
1135 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1136 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1137 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1138 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1139 break
1140 fi
1141 done
1142 fi
1143 fi
1144
1145 # 3rd try, which works on a standard partition (ext2/3), but not on swap
1146 # For LVM gives a /dev/mapper entry
1147 if [ "x$actual_dev" = "x" ]; then
1148 actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1149 fi
1150
1151 # 4th try, with vol_id
1152 # SWAP only
1153 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1154 list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1155 for dev_swap in $list_swaps ; do
1156 dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1157 if [ "x$dev_exists" != "x" ]; then
1158 actual_dev=$dev_swap
1159 break;
1160 fi
1161 done
1162 fi
1163
1164 # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1165 # LABEL=SW-cciss/c0d0p3 (RDP)
1166 # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1167 # SWAP only
1168 if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1169 skip=""
1170 uname=$KERVERRUN
1171 [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1172 # 2.6.12 needs 16 (FC3)
1173 [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1174 # 2.6.19 and upper needs 1052
1175 [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1176 [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1177 [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1178 if [ $skip = "" ]; then
1179 Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1180 fi
1181 for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1182 do
1183 # Location of the swap label for kernel 2.6
1184 try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1185 if [ "x$try_dev_label" = "x$redhat_label" ]; then
1186 actual_dev=$try_dev
1187 fi
1188 done
1189 fi
1190
1191 # Check if one of all those tries has known success
1192 if [ "x$actual_dev" != "x" ]; then
1193 current_partition=$actual_dev
1194 else
1195 Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1196 fi
1197 # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1198 # current_partition contains only first column of /etc/fstab
1199 elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1200 uuid=`echo "$current_partition" | cut -d'=' -f2`
1201 actual_dev=""
1202
1203 # 1st try, findfs - the RHEL way of finding labels and their partitions
1204 if [ -x "/sbin/findfs" ]; then
1205 actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1206 fi
1207
1208 # 2nd try : blkid, the good way for all UUID except swap
1209 if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1210 actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1211 # For LVM FS it will give a /dev/dm-# which should then be converted
1212 if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1213 major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1214 minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1215 for dev in `ls /dev/mapper/*`; do
1216 major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1217 minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1218 if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1219 actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1220 break
1221 fi
1222 done
1223 fi
1224 fi
1225
1226 # 3th try, with vol_id
1227 if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1228 list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1229 for dev in $list_dev ; do
1230 dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1231 if [ "x$dev_exists" != "x" ]; then
1232 actual_dev=$dev
1233 break;
1234 fi
1235 done
1236 fi
1237
1238 # 4th try, with dumpuuid (VMWare only ?) for swap
1239 if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1240 list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1241 for dev in $list_dev ; do
1242 dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1243 if [ "x$dev_exists" != "x" ]; then
1244 actual_dev=$dev
1245 break;
1246 fi
1247 done
1248 fi
1249
1250 # Check if one of all those tries has known success
1251 if [ "x$actual_dev" != "x" ]; then
1252 current_partition=$actual_dev
1253 else
1254 Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1255 fi
1256 else
1257 # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1258 # they use symlinks in fstab unrelated to what is shown in mount !
1259 if [ _"$partition_mountpt" = _"" ]; then
1260 # set default in case we dont't find it
1261 for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1262 if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1263 str_to_find_fmt_with=$tmpp
1264 partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1265 break;
1266 fi
1267 done
1268 fi
1269 fi
1270
1271 # Detects noauto partitions not mounted and exclude them
1272 partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1273 if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
1274 LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1275 continue
1276 fi
1277 # Detects bind partitions and exclude them
1278 if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1279 LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1280 continue
1281 fi
1282
1283 # Look for devices which have to be excluded
1284 skip=0
1285 if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1286 l=""
1287 list_of_devices="`ReadAllLink $current_partition`"
1288 for d in $list_of_devices; do
1289 l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1290 done
1291
1292 # Remove PVs from LVs excluded
1293 l="$l `GetPVsForLV $current_partition`"
1294
1295 # We want a single unique list
1296 list_of_devices="`echo $l | sort -u`"
1297
1298 for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1299 if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1300 LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1301 skip=1
1302 continue
1303 fi
1304 done
1305 fi
1306 if [ $skip -eq 1 ]; then
1307 continue
1308 fi
1309
1310 partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1311 # Detects iso9660 ISO images and exclude them
1312 if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1313 LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1314 continue
1315 fi
1316 # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1317 # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1318 # the former is then a link to the latter, so we test whether
1319 # $current_partition is actually such a link or not and set
1320 # $current_lvolume accordingly. On Debian you may find more than one answer
1321 # so we remove the one corresponding to /dev/.static
1322 # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1323 # principle is the same and we need to find the link to it as well.
1324 # Note that $current_lvolume may well be an
1325 # ordinary device. It is just to make sure that we feed the right value
1326 # into any of the LVM tools if possible.
1327
1328 current_lvolume="$current_partition"
1329 if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1330 # .static dir are a Debian specificity
1331 current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1332 echo $current_lvolume | grep -q ' '
1333 if [ $? -eq 0 ]; then
1334 LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1335 fi
1336 # if it's not found, it may well be a real device such as a multipath one
1337 # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1338 if [ _"$current_lvolume" = _"" ]; then
1339 current_lvolume="$current_partition"
1340 fi
1341 fi
1342 #
1343 # End of LVM device style variation code (other than $current_lvolume).
1344
1345 if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1346 # Size computed via LVM not directly
1347 partition_size="lvm"
1348 else
1349 [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1350 [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1351 if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1352 # Skip swap files
1353 [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1354 partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1355 [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1356 [ "$partition_format" != "swap" ] && partition_format="swap"
1357 if [ "$partition_size" = "" ] ; then
1358 totalsize=0
1359 items=0
1360 for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1361 totalsize=$(($totalsize+$i))
1362 items=$(($items+1))
1363 done
1364 [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1365 [ "$partition_size" -lt "125000" ] && partition_size=125000
1366 LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1367 fi
1368 else
1369 partition_size=`SizeOfPartition $current_partition`
1370 fi
1371 fi
1372 [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1373 [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1374 if [ "$partition_mountpt" = "" ] ; then
1375 if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1376 if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1377 partition_mountpt="raid"
1378 partition_format="raid"
1379 else
1380 partition_mountpt="lvm"
1381 partition_format="lvm"
1382 fi
1383 fi
1384 fi
1385 psz=$partition_size
1386 LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1387 [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1388 if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1389 partition_mountpt="image"
1390 old_partition_fmt=$partition_format
1391 partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1392 partition_size=$(($partition_size+1)); # just in case
1393 if [ "$partition_format" = "Linux" ] ; then
1394 LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1395 LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1396 partition_format=$old_partition_fmt
1397 fi
1398 fi
1399
1400 if [ ! "$partition_mountpt" ] ; then
1401 LogFile "------- $FDISK -l $qq log ------------"
1402 for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1403 partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1404 [ "$partition_format" ] && break
1405 done
1406 LogFile "------- $FDISK log end ------------"
1407 if [ "$partition_format" = "Compaq diagnostics" ] ; then
1408 partition_format="compaq"
1409 elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1410 LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1411 continue
1412 fi
1413 fi
1414 if [ "$redhat_label" ]; then
1415 label="$redhat_label"
1416 elif [ "$uuid" ]; then
1417 label="$uuid"
1418 fi
1419 partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1420 [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1421 unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1422 if [ "$current_partition" = "" ] ; then
1423 LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1424 elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1425 if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1426 partition_mountpt=raid
1427 partition_format=raid
1428 printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1429 printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1430 else
1431 LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1432 fi
1433 elif [ "$partition_format" = "" ] ; then
1434 LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1435 elif [ "$partition_size" = "" ] ; then
1436 LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1437 elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1438 continue
1439 else
1440 if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1441 LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1442 partition_format="vfat"
1443 fi
1444 printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1445 printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1446 fi
1447 done
1448 LogAll "-----------------------------------"
1449}
1450
1451CheckMountlist() {
1452 local file=$1
1453 # Coherency verification
1454 ML01=`cat $file | wc -l`
1455 ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1456 ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1457 ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1458 if [ "$ML01" -ne "$ML1" ]; then
1459 LogFile "--------------------------------------------"
1460 LogAll "WARNING: Duplicate device entry in mountlist"
1461 LogFile "--------------------------------------------"
1462 fi
1463 if [ "$ML02" -ne "$ML2" ]; then
1464 LogFile "--------------------------------------------"
1465 LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1466 LogFile "------------------------------------------------"
1467 fi
1468}
1469
1470OfferToMakeBootableISO() {
1471 local i old_pwd
1472 if [ -z "$ISO_CMD" ]; then
1473 LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1474 return
1475 fi
1476 if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1477 echo -en "Shall I make a bootable CD image? (y/[n]) "
1478 read i
1479 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1480 fi
1481 rm -Rf $MINDI_TMP/iso
1482 mkdir -p $MINDI_TMP/iso/{images,archives}
1483 LogFile "INFO: mindi_lib = $MINDI_LIB"
1484 cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1485 for i in memdisk memtest.bin memtest.img ; do
1486 j=$MINDI_LIB/$i
1487 k=$MINDI_TMP/iso
1488 if [ -e "$j" ] ; then
1489 LogAll "INFO: Copying $j to $k"
1490 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1491 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1492 if [ _"$MONDO_SHARE" != _"" ]; then
1493 cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1494 fi
1495 fi
1496 done
1497 MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1498 if [ $KERNEL_IS_XEN = "yes" ]; then
1499 cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1500 cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1501 fi
1502 cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1503 cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1504
1505 if [ _"$MONDO_SHARE" != _"" ]; then
1506 if [ $KERNEL_IS_XEN = "yes" ]; then
1507 cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1508 cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1509 fi
1510 cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1511 cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1512 fi
1513 MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1514 if [ "$ARCH" != "ia64" ] ; then
1515 cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1516 fi
1517 old_pwd=`pwd`
1518 cd "$MINDI_TMP/iso"
1519 if [ "$ARCH" != "ia64" ] ; then
1520 if [ _"$MONDO_SHARE" != _"" ]; then
1521 cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1522 if [ $KERNEL_IS_XEN = "yes" ]; then
1523 cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1524 fi
1525 cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1526 fi
1527 $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1528 else
1529 $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1530 fi
1531 if [ "$?" -ne "0" ] ; then
1532 LogFile "----------- $ISO_CMD's errors --------------"
1533 LogAll "$ISO_CMD returned the following errors:"
1534 cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1535 LogAll "ERROR: Failed to create ISO image."
1536 else
1537 LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1538 fi
1539 rm -f $MINDI_TMP/mkisofs.log
1540 cd "$old_pwd"
1541}
1542
1543
1544OfferToMakeBootableUSB() {
1545 local i
1546 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1547 echo -n "Shall I make a bootable USB device ? (y/[n]) "
1548 read i
1549 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1550 if [ "$USBDEVICE" = "" ]; then
1551 echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1552 read dev
1553 USBDEVICE=$dev
1554 fi
1555 echo "WARNING: This will erase all content on $USBDEVICE"
1556 echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1557 read i
1558 [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1559 fi
1560 rm -Rf $MINDI_TMP/usb
1561 mkdir -p $MINDI_TMP/usb
1562 USBPART="${USBDEVICE}1"
1563
1564 echo -en "Transforming $USBDEVICE in a Bootable device "
1565 echo -en "."
1566 LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1567 LogFile "INFO: Checking $USBDEVICE"
1568 $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1569 if [ $? -ne 0 ]; then
1570 LogAll "ERROR: Unable to access $USBDEVICE"
1571 LogAll " Make sure your USB device is plugged in"
1572 MindiExit -1
1573 fi
1574 echo -en "."
1575 # Some distro do auto mount at that point (Ubuntu)
1576 LogFile "INFO: Unmounting $USBPART just in case"
1577 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1578 # If your key has no MBR it may cause an issue
1579 # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1580 if [ -r $MBRFILE ]; then
1581 LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1582 dd if=$MBRFILE of=$USBDEVICE
1583 else
1584 LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1585 LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1586 fi
1587 LogFile "INFO: Preparing $USBDEVICE"
1588 cat > $MINDI_TMP/fdisk.txt << EOF
1589d
1590d
1591d
1592d
1593n
1594p
15951
1596
1597
1598t
1599b
1600a
16011
1602w
1603EOF
1604 $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1605 if [ $? -ne 0 ]; then
1606 LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1607 LogAll " Make sure your USB device is plugged in"
1608 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1609 MindiExit -1
1610 fi
1611 LogFile "fdisk build file"
1612 LogFile "----------------"
1613 cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1614 LogFile "----------------"
1615 rm -f $MINDI_TMP/fdisk.txt
1616 LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1617 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1618 echo -en "."
1619 # Calling kpartx in case devices were not created
1620 if [ -x "/sbin/kpartx" ]; then
1621 /sbin/kpartx -a $USBDEVICE
1622 fi
1623 # Some distro do auto mount at that point (Ubuntu)
1624 LogFile "INFO: Unmounting $USBPART just in case again"
1625 umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1626 echo -en "."
1627 # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1628 if [ "`which dmsetup`" != "" ]; then
1629 block_id="`echo $USBPART | sed 's|/dev/||g'`"
1630 if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1631 LogFile "INFO: Removing $block_id from device mapper."
1632 sleep 1
1633 dmsetup remove $block_id
1634 fi
1635 fi
1636 echo -en "."
1637 LogFile "INFO: Creating a vfat filesystem on $USBPART"
1638 mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1639 if [ $? -ne 0 ]; then
1640 LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1641 LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1642 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1643 MindiExit -1
1644 fi
1645 echo -en "."
1646 LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1647 mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1648 if [ $? -ne 0 ]; then
1649 LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1650 LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1651 $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1652 MindiExit -1
1653 fi
1654 echo -en "."
1655 mkdir -p $MINDI_TMP/usb/images
1656 cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1657 echo -en "."
1658 LogFile "INFO: mindi_lib = $MINDI_LIB"
1659 for i in memdisk memtest.bin memtest.img ; do
1660 j=$MINDI_LIB/$i
1661 k=$MINDI_TMP/usb
1662 if [ -e "$j" ] ; then
1663 LogIt "INFO: Copying $j to $k"
1664 cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1665 cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1666 fi
1667 done
1668 echo -en "."
1669 MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1670 echo -en "."
1671 cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1672 echo -en "."
1673 cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1674 echo -en "."
1675 MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1676 echo -en "."
1677 LogAll "----------- syslinux's conf --------------"
1678 cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1679 LogAll "------------------------------------------"
1680 umount $MINDI_TMP/usb
1681 if [ "$ARCH" != "ia64" ] ; then
1682 syslinux -v 2>&1 | grep -q 4.02
1683 if [ $? -eq 0 ]; then
1684 # This buggy version of syslinux requires a call to --stupid and not -s
1685 syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1686 res=$?
1687 else
1688 syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1689 res=$?
1690 fi
1691 if [ $res -ne 0 ] ; then
1692 LogAll "----------- syslinux's errors --------------"
1693 cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1694 LogAll "------------------------------------------"
1695 LogIt "ERROR: Failed to create USB image."
1696 else
1697 echo -e "$DONE"
1698 LogFile "INFO: Created bootable USB image on $USBDEVICE"
1699 fi
1700 rm -f $MINDI_TMP/syslinux.log
1701 else
1702 LogAll "ERROR: No USB boot support for ia64"
1703 MindiExit -1
1704 fi
1705}
1706
1707
1708MakeMessageFile() {
1709
1710 if [ -x "/bin/lsb_release" ]; then
1711 DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1712 elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1713 DESC="Arch Linux"
1714 if [ -r /var/log/pacman.log ]; then
1715 # there are no releases but we can get the last system upgrade
1716 # Output example: Arch Linux [2011-03-03 01:39]
1717 DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1718 fi
1719 elif [ -r /etc/issue.net ]; then
1720 DESC=`head -1 /etc/issue.net`
1721 elif [ -r /etc/issue ]; then
1722 DESC=`head -1 /etc/issue`
1723 elif [ -x "/usr/bin/pbdistrocheck" ]; then
1724 # For pb >= 0.9.8
1725 DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1726 else
1727 DESC="Unknown desc"
1728 fi
1729 sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1730 if [ _"$MONDO_SHARE" != _"" ]; then
1731 if [ "$CDRECOVERY" != "yes" ] ; then
1732 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1733 echo -en "Press <enter> to continue.\n"
1734 elif [ ! "$MINDI_TMP" ] ; then
1735 echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1736 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1737 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1738 fi
1739 else
1740 echo -en "$BOOT_MEDIA_MESSAGE"
1741 fi
1742 else
1743 echo -en "\
1744To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1745CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1746 fi
1747 fi
1748
1749 # Also create the other help screens
1750 head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1751 head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1752 head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1753}
1754
1755
1756MakeBootConfFile() {
1757 local options i ooo
1758 options=""
1759 # Type of boot file (elilo or syslinux/isolinux)
1760 type=$1
1761 if [ "$type" = "elilo" ]; then
1762 sep="="
1763 else
1764 sep=" "
1765 fi
1766
1767 # Generic header for conf file
1768 if [ "$type" != "elilo" ] ; then
1769 echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1770 else
1771 echo -en "prompt\n"
1772 fi
1773
1774 # Compute which default option to boot from
1775 if [ "$CDRECOVERY" = "yes" ] ; then
1776 echo -en "default${sep}RESTORE\n"
1777 # In case it's mondoarchive
1778 elif [ _"$MONDO_SHARE" != _"" ]; then
1779 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1780 echo -en "default${sep}iso\n"
1781 else
1782 echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1783 fi
1784 else
1785 echo -en "default${sep}expert\n"
1786 fi
1787
1788 # Handle timeout
1789 if [ "$CDRECOVERY" != "yes" ] ; then
1790 echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1791 else
1792 echo -en "timeout${sep}10000\n"
1793 fi
1794 echo -en "\n"
1795
1796 # prepare which labels will be generated
1797 if [ "$CDRECOVERY" = "yes" ] ; then
1798 options="RESTORE expert"
1799 else
1800 if [ _"$MONDO_SHARE" != _"" ]; then
1801 options="interactive expert compare iso nuke isonuke"
1802 else
1803 options="expert"
1804 fi
1805 fi
1806
1807 # Generate rest of conf file
1808 for i in $options ; do
1809 ooo=$i
1810 [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1811 if [ "$type" = "elilo" ]; then
1812 outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1813 else
1814 ps="/"
1815 if [ "$type" = "syslinux" ]; then
1816 ps=""
1817 fi
1818 if [ $KERNEL_IS_XEN = "no" ]; then
1819 outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1820 else
1821 outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1822 fi
1823 fi
1824 echo -en "$outstr"
1825 done
1826 if [ -e "$MINDI_LIB/memtest.img" ] ; then
1827 if [ "$type" = "elilo" ]; then
1828 echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1829 echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1830 else
1831 ps="/"
1832 if [ "$type" = "syslinux" ]; then
1833 ps=""
1834 fi
1835 echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1836 echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1837 fi
1838 fi
1839}
1840
1841
1842PrepareBootDiskImage_LILO() {
1843 local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1844 imagesdir=$MINDI_CACHE
1845 kernelpath=$1
1846
1847 retval=0
1848
1849 old_pwd=`pwd`
1850 [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1851 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1852 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1853 echo -en "..."
1854 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1855 mountpoint=$MINDI_TMP/mountpoint.$$
1856 mkdir -p $mountpoint
1857 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1858 LogFile "Creating vfat filesystem on $imagefile"
1859 mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1860 mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1861
1862 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1863 mkdir -p $mountpoint/etc
1864 liloconf=$mountpoint/elilo.conf
1865
1866 MakeBootConfFile elilo > $liloconf
1867
1868 # Copy it so that CD-ROM menu entry is satisfied
1869 mountefi=0
1870 df -T | grep /boot/efi | grep -q vfat
1871 if [ $? -ne 0 ]; then
1872 mount /boot/efi
1873 if [ $? -ne 0 ]; then
1874 echo "You have to mount your EFI partition when using mindi"
1875 MindiExit -1
1876 fi
1877 mountefi=1
1878 fi
1879 el=`find /boot/efi -name elilo.efi`
1880 cp $el $mountpoint
1881 cp $liloconf $mountpoint
1882 if [ $mountefi -eq 1 ]; then
1883 umount /boot/efi 2>&1 > /dev/null
1884 fi
1885
1886 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1887 cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1888 if [ "$?" -ne "0" ] ; then
1889 LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1890 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1891 LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1892 rm -f $MINDI_TMP/mtpt.$$
1893 LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1894 retval=$(($retval+1))
1895 fi
1896 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1897
1898 mkdir -p $mountpoint/tmp
1899 if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1900 cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1901 fi
1902
1903 # copy the kernel across
1904 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1905 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1906 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1907 cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1908 if [ "$?" -ne "0" ] ; then
1909 LogFile "INFO: Files at mountpoint ($mountpoint) :"
1910 du -sk $mountpoint/* >> $LOGFILE
1911 LogFile "--- end of list of files ---"
1912 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1913 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1914 cd "$old_pwd"
1915 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1916 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1917 # losetup /dev/loop0 -d
1918 [ "$imagefile" != "" ] && rm -f $imagefile
1919 LogIt "ERROR: Sorry, your kernel is too big for your image"
1920 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1921 return 0
1922 fi
1923 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1924 LogFile "INFO: Free space left on image = $free_space KB"
1925 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1926 # make it bootable
1927 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1928 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1929 if [ "$KERN_DISK_MADE" ] ; then
1930 LogFile "INFO: Not running LILO. It's not that kind of disk."
1931 fi
1932
1933 cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1934 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1935 echo -en "..."
1936 rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1937 if [ "$retval" -eq "0" ] ; then
1938 echo -en "...$DONE\n"
1939 if [ "$KERN_DISK_MADE" ] ; then
1940 LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1941 fi
1942 else
1943 echo -en "...failed\n"
1944 LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1945 [ "$imagefile" != "" ] && rm -f $imagefile
1946 fi
1947 [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1948 return $retval
1949}
1950
1951
1952PrepareBootDiskImage_ISOLINUX() {
1953 local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1954 imagesdir=$MINDI_CACHE
1955 kernelpath=$1
1956 do_boot_root_thingy=""
1957 retval=0
1958
1959 old_pwd=`pwd`
1960 [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1961 echo -en "Making "$BOOT_SIZE"KB boot disk..."
1962 TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1963 echo -en "..."
1964 imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1965 mountpoint=$MINDI_TMP/mountpoint.$$
1966 mkdir -p $mountpoint
1967 dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1968 LogFile "INFO: Creating vfat filesystem on $imagefile"
1969 mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1970 # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1971 syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1972
1973 # Only move it now to its final destination and use it now
1974 mv $imagefile $imagesdir
1975 imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1976
1977 mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1978
1979 # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1980 MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1981 MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1982 LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1983 cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1984 if [ "$?" -ne "0" ] ; then
1985 LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1986 cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1987 LogAll " Please unload some of your modules and try again."
1988 rm -f $MINDI_TMP/mtpt.$$
1989 LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1990 LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1991 retval=$(($retval+1))
1992 fi
1993
1994 mkdir -p $mountpoint/tmp
1995 if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1996 cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1997 fi
1998
1999 # copy the kernel across
2000 [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2001 dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2002 free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2003
2004 retval=0
2005 cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2006 retval=$?
2007 if [ $KERNEL_IS_XEN = "yes" ]; then
2008 cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2009 let retval+=$?
2010 fi
2011
2012 if [ "$retval" -ne "0" ] ; then
2013 LogFile "INFO: Files at mountpoint ($mountpoint) :"
2014 du -sk $mountpoint/* >> $LOGFILE
2015 LogFile "--- end of list of files ---"
2016 echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2017 [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2018 cd "$old_pwd"
2019 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2020 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2021
2022 LogIt "ERROR: Sorry, your kernel is too big for your image"
2023 Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2024 fi
2025 max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2026 LogFile "INFO: Free space left on image = $free_space KB"
2027 LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2028
2029 # make it bootable
2030 [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2031 mkdir -p $mountpoint/etc
2032 [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2033 umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2034 echo -en "..."
2035 rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2036
2037 if [ "$retval" -eq "0" ] ; then
2038 echo -en "...$DONE\n"
2039 if [ "$KERN_DISK_MADE" ] ; then
2040 [ "$imagefile" != "" ] && rm -f $imagefile
2041 LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2042 fi
2043 else
2044 echo -en "...failed\n"
2045 LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2046 [ "$imagefile" != "" ] && rm -f $imagefile
2047 fi
2048 [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2049 return $retval
2050}
2051
2052
2053ParseModprobeForIncludes() {
2054local MODPROBE_CONF mpincfile includes include
2055
2056MODPROBE_CONF=/etc/modprobe.conf
2057mpincfile=$1
2058touch $mpincfile
2059if [ -a $MODPROBE_CONF ]; then
2060 includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2061 if [ -n "$includes" ]; then
2062 for include in $includes
2063 do
2064 if [ -a "$include" ]; then
2065 echo $include >> $mpincfile
2066 fi
2067 done
2068 fi
2069fi
2070}
2071
2072
2073PrepareDataDiskImages() {
2074 local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2075
2076 imagesdir=$MINDI_CACHE
2077 rm -f $imagesdir/mindi.iso
2078 needlist=$MINDI_TMP/what-we-need.txt
2079 bigdir=$MINDI_TMP/bigdir
2080 mkdir -p $bigdir/usr/bin
2081 mkdir -p $bigdir/usr/sbin
2082 includefile=$MINDI_TMP/$$.includefile.txt
2083
2084 # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2085 for d in bin sbin lib lib64; do
2086 if [ -h "/$d" ]; then
2087 thelink=`readlink /$d`
2088 mkdir -p $thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2089 mv $d/* $thelink 2> /dev/null
2090 if [ -d "$d" -a ! -h "$d" ]; then
2091 rmdir $d
2092 fi
2093 if [ ! -h $d ]; then
2094 rm -f $d 2> /dev/null
2095 ln -s $thelink $d || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2096 fi
2097 fi
2098 done
2099
2100 lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2101 if [ -e "$DEPLIST_FILE" ]; then
2102 lfiles="$DEPLIST_FILE $lfiles"
2103 fi
2104 lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2105 ParseModprobeForIncludes $includefile
2106 lines=$(($lines+`cat $includefile | wc -l`))
2107 cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2108 res=$?
2109 rm -f $includefile
2110 if [ "$YOUR_KERNEL_SUCKS" ]; then
2111 pwd=`pwd`
2112 cd "$MINDI_TMP"
2113 for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2114 tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2115 done
2116 for i in $EXTRA_MODS ; do
2117 j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2118 [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2119 for k in $j ; do
2120 tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2121 LogFile "INFO: Added failsafe module $k to ramdisk"
2122 done
2123 done
2124 cd "$pwd"
2125 else
2126 ListKernelModulePaths >> $needlist
2127 fi
2128 if [ "$res" -ne "0" ] ; then
2129 Die "You have $res files present in dependency list\nbut absent from filesystem."
2130 fi
2131 FindAndAddUserKeyboardMappingFile
2132 mkdir -p $bigdir/tmp
2133 if [ _"$MONDO_SHARE" != _"" ]; then
2134 MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2135 cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2136 fi
2137 [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2138 DropOptimizedLibraries $needlist $bigdir
2139 echo -en "Assembling dependency files"
2140
2141 CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2142
2143 # also copy io.sys and msdos.sys, if we can find them
2144 for i in `mount | cut -d' ' -f3` ; do
2145 for j in io.sys msdos.sys ; do
2146 [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2147 done
2148 done
2149
2150 # master boot record, too
2151 i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2152 if [ "$i" ] ; then
2153 LogAll "INFO: Backing up $i's MBR"
2154 dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2155 sleep 1
2156 sync
2157 j=$i
2158 [ -h "$j" ] && j=`readlink -f $j`
2159 LogAll "INFO: Creating /dev/boot_device ($j)"
2160 mkdir -p $bigdir/dev
2161 cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2162 fi
2163
2164 old_pwd=`pwd`
2165 cd "$bigdir"
2166
2167 # Get terminfo content
2168 ti="usr/share/terminfo/l"
2169 if [ -d /$ti ]; then
2170 mkdir -p $ti
2171 cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2172 fi
2173 if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2174 cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2175 [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2176 fi
2177 if [ -d "/lib/dev-state" ]; then
2178 tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2179 fi
2180 cd "$old_pwd"
2181 echo -e "$DONE"
2182 TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2183 MakeMountlist $MINDI_TMP/mountlist.txt
2184 CheckMountlist $MINDI_TMP/mountlist.txt
2185 mkdir -p $bigdir/tmp
2186 cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2187 if [ _"$MONDO_SHARE" != _"" ]; then
2188 cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2189 fi
2190 if [ $LVM != "false" ]; then
2191 $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2192 if [ "$?" -ne "0" ]; then
2193 LVM="false"
2194 rm -f $bigdir/tmp/i-want-my-lvm
2195 else
2196 LogFile "Your i-want-my-lvm file content is:"
2197 LogFile "-----------------------------------"
2198 cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2199 LogFile "-----------------------------------"
2200 fi
2201 fi
2202 LogFile "Your mountlist.txt file content is:"
2203 LogFile "-----------------------------------"
2204 cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2205 LogFile "-----------------------------------"
2206
2207 echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2208 echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2209 if [ _"$MONDO_SHARE" != _"" ]; then
2210 for q in filelist.full.gz biggielist.txt ; do
2211 [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2212 cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2213 done
2214 fi
2215
2216 echo -en "Tarring and zipping the data content..."
2217 size_of_all_tools=`du -sk $bigdir | cut -f1`
2218 (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2219 LogFile "Size of the data content"
2220 LogFile "------------------------"
2221 du -sk $imagesdir/*gz >> $LOGFILE
2222 LogFile "------------------------"
2223 echo -e "$DONE"
2224
2225 FRIENDLY_OUTSTRING="Boot and data disk images were created."
2226 rm -rf $bigdir
2227 rm -f $needlist
2228}
2229
2230
2231ProcessLDD() {
2232 local incoming f d nd bd bnd
2233 read incoming
2234 while [ "$incoming" != "" ]; do
2235 # We take the full path name of the dyn. lib. we want
2236 incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2237 for f in $incoming ; do
2238 # echo modified file name if one of the parent dir is a link
2239 # by replacing the original dirname by the destination of the link
2240 d="`dirname $f`"
2241 found="false"
2242 while [ "$d" != "/" ]; do
2243 if [ -h "$d" ]; then
2244 nd=`readlink -f $d`
2245 bd=`basename $d`
2246 bnd=`basename $nd`
2247 f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2248 echo $d
2249 fi
2250 d="`dirname $d`"
2251 done
2252
2253 echo "$f"
2254 echo "`ReadAllLink $f`"
2255 done
2256 read incoming
2257 done
2258}
2259
2260
2261Prompt() {
2262 echo -en "$1"
2263 read line
2264}
2265
2266
2267ReadLine() {
2268 local i incoming
2269 read incoming
2270 i=0
2271 while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2272 i=$(($i+1))
2273 read incoming
2274 done
2275 echo "$incoming"
2276}
2277
2278
2279SizeOfPartition() {
2280 local devpath drive res stub
2281 device=$1
2282 if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2283 Die "Cannot find $device's size - is your /etc/fstab sane?"
2284 fi
2285 if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2286 res=`SizeOfRaidPartition $device`
2287 [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2288 echo "$res"
2289 return 0
2290 fi
2291 # patch from Bill <bill@iwizard.biz> - 2003/08/25
2292 res=`$FDISK -s $device 2>> $LOGFILE`
2293 # end patch
2294 # take only the first in case of multiple mount (cifs, nfs, ...)
2295 [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2296 [ "$res" = "" ] && res="-1"
2297 echo $res
2298 return 0
2299}
2300
2301
2302SizeOfRaidPartition() {
2303 local real_dev smallest_size silly tmp
2304
2305 silly=999999999
2306 smallest_size=$silly
2307
2308 for real_dev in `GetRaidDevMembers $1` ; do
2309 tmp=`SizeOfPartition $real_dev`
2310 [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2311 done
2312
2313 if [ "$smallest_size" = "$silly" ] ; then
2314 echo "-1"
2315 return 1
2316 else
2317 echo "$smallest_size"
2318 return 0
2319 fi
2320}
2321
2322
2323StripExecutable()
2324{
2325 local tmpfile
2326
2327 tmpfile=$MINDI_TMP/stripped.$$.dat
2328 [ -d "$1" ] || [ -h "$1" ] && return
2329 cp -f $1 $tmpfile 2>> $LOGFILE
2330 strip $tmpfile 2> /dev/null
2331 if [ "$?" -eq "0" ] ; then
2332 cp -f $tmpfile $1 2>> $LOGFILE
2333 LogFile "INFO: Stripped binary $2"
2334 fi
2335 rm -f $tmpfile
2336}
2337
2338KernelVer() {
2339 local fkern_ver fname
2340
2341 fname=$1
2342 file $fname | grep -q gzip
2343 if [ "$?" -eq "0" ] ; then
2344 # Used by ia64
2345 fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2346 else
2347 fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2348 fi
2349 echo "$fkern_ver"
2350}
2351
2352
2353# WARNING: This function should just echo the final result !!!
2354#
2355TryToFindKernelPath() {
2356 local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2357
2358 we_want_version=$KERVERRUN
2359 possible_kernels=""
2360 duff_kernels=""
2361 output=""
2362
2363 if [ "$ARCH" = "ia64" ] ; then
2364 root="/boot/efi/efi"
2365 else
2366 root="/"
2367 fi
2368 # See if we're booted from a Xen kernel
2369 # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2370 if [ -f /proc/xen/capabilities ]; then
2371 # It's a Xen kernel
2372 KERNEL_IS_XEN="yes"
2373 LogFile "INFO: It's a Xen kernel..."
2374 fi
2375
2376 for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2377 [ ! -e "$fname" ] && continue
2378 [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2379 fkern_ver=`KernelVer $fname`
2380 [ "$fkern_ver" = "" ] && continue
2381 [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2382 [ -f "$fname" ] || continue
2383 [ -h "$fname" ] && continue
2384 kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2385 file $fname | grep -q gzip
2386 if [ "$?" -eq "0" ] ; then
2387 # Used by ia64
2388 if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2389 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2390 duff_kernels="$fname $duff_kernels"
2391 else
2392 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2393 possible_kernels="$fname $possible_kernels"
2394 fi
2395 else
2396 if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2397 LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2398 duff_kernels="$fname $duff_kernels"
2399 else
2400 [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2401 possible_kernels="$fname $possible_kernels"
2402 fi
2403 fi
2404 done
2405 if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2406 possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2407 fi
2408 if [ ! "$possible_kernels" ] ; then
2409 LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2410 possible_kernels="$duff_kernels"
2411 if [ ! "$possible_kernels" ] ; then
2412 LogAll "INFO: Sorry, no duff kernels either"
2413 else
2414 LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2415 LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2416 fi
2417 fi
2418 if [ $KERNEL_IS_XEN = "yes" ]; then
2419 possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2420 noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2421 FindMboot32Binary
2422 fi
2423 possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2424 noof_kernels=`CountItemsIn "$possible_kernels"`
2425 if [ "$noof_kernels" -eq "0" ] ; then
2426 LogAll "Could not find your kernel."
2427 if [ -e "/boot/vmlinuz" ] ; then
2428 LogAll "INFO: Using /boot/vmlinuz as a last resort."
2429 output=/boot/vmlinuz
2430 else
2431 output=""
2432 fi
2433 elif [ "$noof_kernels" -eq "1" ] ; then
2434 kp=`echo "$possible_kernels" | sed s/' '//`
2435 LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2436 output="$kp"
2437 else
2438 for i in $possible_kernels ; do
2439 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2440 LogAll "INFO: OK, I used my initiative and found that "
2441 LogAll "INFO: $i is probably your kernel. "
2442 output="$i"
2443 break
2444 fi
2445 done
2446 if [ ! -n "$output" ]; then
2447 if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2448 output=/boot/vmlinuz
2449 LogFile "INFO: Schlomo, this one's for you."
2450 else
2451 LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2452 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2453 LogFile "INFO: $possible_kernels"
2454 output=""
2455 fi
2456 fi
2457 fi
2458 if [ $KERNEL_IS_XEN = "yes" ]; then
2459 if [ "$noof_xenkernels" -eq "0" ]; then
2460 xenkernelpath=""
2461 elif [ "$noof_xenkernels" -eq "1" ]; then
2462 xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2463 LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2464 else
2465 for i in $possible_xenkernels ; do
2466 if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2467 LogFile "INFO: OK, I used my initiative and found that "
2468 LogFile "INFO: $i is probably your Xen kernel. "
2469 xenkernelpath="$i"
2470 break
2471 fi
2472 done
2473 if [ ! -n "$xenkernelpath" ]; then
2474 new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2475 if [ ! -n "$new_possible_xenkernels" ]; then
2476 xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2477 LogFile "INFO: Using $xenkernelpath"
2478 else
2479 LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2480 LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2481 LogFile "INFO: $possible_xenkernels"
2482 output=""
2483 xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2484 LogFile "INFO: Using $xenkernelpath"
2485 fi
2486 fi
2487 fi
2488 if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2489 Die "Cannot find Xen kernel $xenkernelpath, aborting"
2490 fi
2491 fi
2492 LogAll "TryToFindKernelPath found $output"
2493 echo "$output"
2494}
2495
2496
2497TurnTgzIntoRdz() {
2498 local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2499
2500 tgz_dir_fname=$1
2501 rdz_fname=$2
2502 kernelsize=$3
2503 maxsize=$(($BOOT_SIZE-$kernelsize))
2504 maxsize=$(($maxsize*2)); # to allow for compression of 50%
2505 tempfile=$MINDI_TMP/temp.rd
2506 mountpoint=$MINDI_TMP/mnt1
2507 res=0
2508 echo -en "..."
2509 dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2510 echo -en "..."
2511 LogFile "INFO: Creating ext2 filesystem on $tempfile"
2512 mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2513 echo -en "..."
2514 mkdir -p $mountpoint
2515 mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2516 echo -en "..."
2517 old_pwd=`pwd`
2518 cd "$mountpoint"
2519
2520
2521 # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2522 for f in $tgz_dir_fname/*; do
2523 if [ ! -r $f ]; then
2524 Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2525 else
2526 cp -Rdf $f . 2>&1 >> $LOGFILE
2527 fi
2528 done
2529 tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2530
2531 cd dev || Die "Can't cd to dev"
2532 tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2533 rm -f dev-entries.tgz
2534 cd ..
2535
2536 for w in insmod.static insmod.static.old ; do
2537 s=`which $w 2> /dev/null`
2538 if [ -e "$s" ] ; then
2539 tar cf - -C / $s 2> /dev/null | tar xf -
2540 fi
2541 done
2542
2543 [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2544
2545 # Copy of files mandatory for ssh to automate mount if sshfs is used
2546 mkdir $mountpoint/.ssh
2547 cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2548 echo > $mountpoint/tmp/myssh << EOF
2549ssh -o StrictHostKeyChecking=no $*
2550EOF
2551 chmod 755 $mountpoint/tmp/myssh
2552
2553 # Copy of files mandatory for ld.so
2554 cp -rp /etc/ld.so.c* $mountpoint/etc
2555
2556 # Handle the case where busybox and mount are dynamically linked
2557 file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically"
2558 if [ $? -eq 0 ]; then
2559 # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2560 rm -f bin/mount
2561 fi
2562
2563 # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2564 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2565 for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2566 if [ -r $f ]; then
2567 echo $f >> $MINDI_TMP/minimal.lis
2568 LocateDeps $f >> $MINDI_TMP/minimal2.lis
2569 fi
2570 done
2571 for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2572 ReadAllLink $f >> $MINDI_TMP/minimal.lis
2573 done
2574 # Initial / are trucated by tar
2575 finallist=""
2576 # Remove directories from the list, as tar will create them anyway
2577 # and it may hurt if /lib is in it as on Debian/Ubuntu
2578 # recent bash says that -d is true for a link to a dir !
2579 for f in `sort -u $MINDI_TMP/minimal.lis`; do
2580 if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2581 finallist="$finallist $f"
2582 fi
2583 done
2584 #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2585 cp -a --parents $finallist . 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2586
2587 # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2588 ln -sf /bin/bash bin/sh
2589 LogIt "INFO: Using bash as default shell"
2590 rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2591
2592 # Avoids an issue on some distro (RHEL5)
2593 rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2594
2595 mkdir -p $mountpoint/tmp
2596 # Management of udev (which includes modprobe in rules)
2597 ps auxww | grep -v grep | grep -qw udevd
2598 if [ $? -eq 0 ]; then
2599 echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2600 LogIt "INFO: udev device manager found"
2601 tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2602 # This avoids NIC remapping if on another machine at restore time on Debian at least
2603 rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2604 # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2605 rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2606 # Do not do it if it's a link (Ubuntu 64 bits #503)
2607 if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2608 tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2609 fi
2610 if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2611 tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2612 fi
2613 if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2614 tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2615 fi
2616 if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2617 lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2618 lis=""
2619 # Get only the files which exist in that list
2620 # and potentially their symlink structure
2621 for i in $lis2; do
2622 if [ -h $i ]; then
2623 j=$i
2624 while [ -h $j ]; do
2625 lis="$lis $j"
2626 j=`readlink $j`
2627 done
2628 lis="$lis $j"
2629 elif [ -f $i ]; then
2630 lis="$lis $i"
2631 fi
2632 done
2633 # And their deps
2634 LocateDeps $lis > $MINDI_TMP/udev.lis
2635 for i in $lis; do
2636 if [ "`echo $i | cut -c1`" = "/" ]; then
2637 j=`echo $i | cut -c2-`
2638 [ "$j" != "" ] && rm -f $j
2639 fi
2640 done
2641 #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2642 cp --parents -a $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log $mountpoint/ || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2643 rm -f $MINDI_TMP/udev.lis
2644 else
2645 LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2646 LogAll " mindi will use static devices which may cause problems"
2647 rm -f $mountpoint/tmp/USE-UDEV
2648 fi
2649 fi
2650
2651 # Management of potential HW info (ProLiant only at the moment)
2652 rm -rf $MINDI_CACHE/bkphw
2653 mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2654 if [ -d $MINDI_CACHE/bkphw ]; then
2655 LogIt "INFO: Hardware Information found and saved ..."
2656 cp -rp $MINDI_CACHE/bkphw .
2657 if [ -f $MINDI_CACHE/tools.files ]; then
2658 lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2659 LocateDeps $lis > $MINDI_TMP/tools.lis
2660 tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2661 fi
2662 if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2663 mv -f $MINDI_CACHE/mindi-rsthw .
2664 chmod 755 ./mindi-rsthw
2665 fi
2666 rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2667 fi
2668
2669 # Management of perl scripts delivered needed at restore time
2670 mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2671 tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2672
2673 for w in cdrom groovy-stuff ; do
2674 mkdir -p mnt/$w
2675 done
2676
2677 tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2678
2679 cd "$old_pwd"
2680 echo -en "..."
2681 if [ "$YOUR_KERNEL_SUCKS" ] ; then
2682 cd "$MINDI_TMP"
2683 needed_modules_path=lib/modules/$FAILSAFE_KVER
2684 else
2685 cd /
2686 if [ "${kernelname}" != "" ]
2687 then
2688 needed_modules_path=lib/modules/${kernelname}
2689 else
2690 needed_modules_path=lib/modules/$KERVERRUN
2691 fi
2692 fi
2693
2694 needed_modules=""
2695 list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2696
2697 if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2698 # For PXE boot
2699 list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2700 fi
2701 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2702 list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2703 fi
2704 for i in $DENY_MODS; do
2705 LogFile "INFO: Removing $i from the list of modules to load"
2706 list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2707 done
2708
2709 [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2710 for i in $list_of_groovy_mods ; do
2711 needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2712 done
2713
2714 for i in `echo $needed_modules | tr ' ' '\n' | sort -u`; do
2715 [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2716 [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2717 LogFile "INFO: Adding $i ($s KB) to the rootfs"
2718 tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2719 # Uncompress modules if not using udev and native modprobe
2720 if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2721 if [ "`echo "$i" | grep -F ".gz"`" ]; then
2722 LogFile "INFO: Uncompressing $i"
2723 gunzip -f $mountpoint/$i
2724 fi
2725 fi
2726 if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2727 echo "Replacing module symlink ($i) with actual file"
2728 rm -f $mountpoint/$i
2729 cp -Lf $i $mountpoint/$i
2730 ls -l $mountpoint/$i
2731 fi
2732 done
2733
2734 # Also copy modules.* in case of udev so that normal modprobe works
2735 tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2736
2737 # Copy FW in case some drivers needs it
2738 for d in "/lib" "/usr/lib"; do
2739 if [ -d "$d/firmware" -a ! -h $d ]; then
2740 cp -a "$d/firmware" "$mountpoint/$d"
2741 fi
2742 done
2743
2744 # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2745 for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2746 if [ -d "$d/multipath" -a ! -h $d ]; then
2747 cp -a "$d/multipath" "$mountpoint/$d"
2748 fi
2749 done
2750
2751 # Copy an additional ProLiant tool for OBDR support
2752 if [ -f $MINDI_TMP/OBDR ]; then
2753 found=0
2754 if [ -x /usr/bin/hpsa_obdr_mode ]; then
2755 mkdir -p $mountpoint/usr/bin
2756 cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2757 LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2758 found=1
2759 fi
2760 if [ -x /usr/bin/sg_wr_mode ]; then
2761 mkdir -p $mountpoint/usr/bin
2762 lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2763 LocateDeps $lis > $MINDI_TMP/obdr.lis
2764 (cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2765 LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2766 found=1
2767 fi
2768 if [ $found -eq 0 ]; then
2769 LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2770 LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2771 fi
2772 fi
2773
2774 if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2775 LogFile "INFO: Deleting devfsd daemon from ramdisk"
2776 [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2777 [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile " ...because kernel is failsafe"
2778 rm -f $mountpoint/sbin/devfsd
2779 fi
2780 cd "$old_pwd"
2781 [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2782 if [ _"$MONDO_SHARE" != _"" ]; then
2783 MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2784 cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2785 cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2786 echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2787 echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2788 [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2789 [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2790 [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2791 [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2792 fi
2793 mkdir -p $mountpoint/proc
2794 LogFile "---------------------------"
2795 LogFile "Content of initial ramdisk:"
2796 LogFile "---------------------------"
2797 (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2798 LogFile "---------------------------"
2799
2800 # Determine what filesystem to use for initrd image
2801 LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2802 gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2803 [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2804 if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2805 # say what will be used
2806 LogFile "INFO: Creating an $gvFileSystem initrd image..."
2807 # kernel expects linuxrc in ext2 filesystem
2808 ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2809 # unmount loop filesystem and create image file using the standard approach
2810 umount $mountpoint || Die "Cannot unmount $tempfile"
2811 dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2812 if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2813 bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2814 else
2815 bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2816 fi
2817 MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2818 gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2819 rm -f ${rdz_fname}.tmp
2820 # log that we are done
2821 LogFile " ...done."
2822 elif [ "$gvFileSystem" = "initramfs" ]; then
2823 # say what will be used
2824 LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2825 # make sure that cpio is there
2826 which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2827 # go into filesystem
2828 cd "$mountpoint"
2829 # kernel expects init in cpio filesystem
2830 ln -sf sbin/init init
2831 # create cpio image file and unmount loop filesystem
2832 find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2833 cd "$old_pwd"
2834 umount $mountpoint || Die "Cannot unmount $tempfile"
2835 # log that we are done
2836 LogFile " ...done."
2837 else
2838 Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2839 fi
2840
2841 if [ "$res" -eq "0" ] ; then
2842 echo -en "..."
2843 else
2844 echo -en "\rMade an rdz WITH ERRORS. \n"
2845 fi
2846 return 0
2847}
2848
2849
2850##############################################################################
2851#----------------------------------- Main -----------------------------------#
2852##############################################################################
2853
2854# Now we can create what we need
2855mkdir -p $MINDI_TMP
2856
2857# Purge from potential old run
2858if [ _"$MINDI_CACHE" = _"" ]; then
2859 Die "MINDI_CACHE undefined"
2860fi
2861
2862# --nolog needs to be first, and is used in analyze-my-lvm
2863if [ "$1" = "--nolog" ] ; then
2864 shift
2865 LOGFILE=/dev/stderr
2866else
2867 > $LOGFILE
2868fi
2869if [ "$1" = "--printvar" ] ; then
2870 shift
2871 if [ _"$1" != _"" ] ; then
2872 set | grep -Ew "^$1" | cut -d= -f2
2873 fi
2874 exit 0
2875fi
2876
2877LogFile "mindi v$MINDI_VERSION"
2878LogFile "$ARCH architecture detected"
2879LogFile "mindi called with the following arguments:"
2880echo "$@">> $LOGFILE
2881LogFile "Start date : `date`"
2882LogFile "-----------------------------"
2883
2884[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2885
2886# Log some capital variables
2887[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2888[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2889LogFile "MONDO_SHARE = $MONDO_SHARE"
2890LogFile "MINDI_LIB = $MINDI_LIB"
2891LogFile "MINDI_SBIN = $MINDI_SBIN"
2892LogFile "MINDI_CONF = $MINDI_CONF"
2893if [ -f $MINDI_CONFIG ]; then
2894 LogFile "-----------------------------"
2895 LogFile " Mindi configuration file "
2896 LogFile "-----------------------------"
2897 grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2898 LogFile "-----------------------------"
2899fi
2900LogFile "In Mindi"
2901LogFile "--------"
2902LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2903LogFile "BOOT_SIZE = $BOOT_SIZE"
2904LogFile "--------"
2905
2906trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2907
2908# Sanity checks
2909which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2910which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2911which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2912which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2913if which awk &> /dev/null ; then
2914 if ! which gawk &> /dev/null ; then
2915 LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2916 fi
2917fi
2918which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2919[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2920
2921[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2922
2923# Update the PATH variable if incomplete
2924if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2925 PATH=$PATH:/sbin:/usr/sbin
2926 export PATH
2927 LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2928 LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2929 LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2930fi
2931
2932# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2933if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2934 source $MINDI_LIB/FindDistroFailsafe
2935 # Log kernel image
2936 LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2937else
2938 [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2939fi
2940
2941if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2942 Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2943fi
2944
2945### TODO
2946### Fix as it's not mandatory on ia64
2947if [ "$ARCH" = "ia64" ] ; then
2948 if which elilo &> /dev/null ; then
2949 LILO_EXE=elilo
2950 else
2951 LILO_EXE=`which false 2> /dev/null`
2952 fi
2953else
2954 FindIsolinuxBinary
2955fi
2956trap "Aborted" SIGTERM
2957DONE="\r\t\t\t\t\t\t\t\tDone. "
2958kernelpath=""
2959MONDO_ROOT=/var/cache/mondo
2960mkdir -p $MONDO_ROOT
2961
2962if [ -d "/proc/lvm" ]; then
2963 # LVM v1
2964 LVMCMD=""
2965 LVM="v1"
2966elif [ -d "/dev/mapper" ]; then
2967 # LVM v2
2968 LVMCMD="lvm"
2969 LVM="v2"
2970else
2971 LVM="false"
2972fi
2973
2974if [ -e "/proc/cmdline" ]; then
2975 CMDLINE="/proc/cmdline"
2976elif [ -e "/tmp/cmdline" ]; then
2977 CMDLINE="/tmp/cmdline"
2978else
2979 CMDLINE="/dev/null"
2980fi
2981
2982LogFile "INFO: LVM set to $LVM"
2983LogFile "----------"
2984LogFile "mount result:"
2985LogFile "-------------"
2986mount >> $LOGFILE
2987if [ -e /etc/raidtab ]; then
2988 LogFile "-------------"
2989 LogFile "/etc/raidtab content:"
2990 LogFile "-------------"
2991 cat /etc/raidtab >> $LOGFILE
2992else
2993 LogFile "No file /etc/raidtab"
2994fi
2995if [ -e /etc/mdadm.conf ]; then
2996 LogFile "-------------"
2997 LogFile "/etc/mdadm.conf content:"
2998 LogFile "-------------"
2999 cat /etc/mdadm.conf >> $LOGFILE
3000else
3001 LogFile "-------------"
3002 LogFile "No file /etc/mdadm.conf"
3003fi
3004LogFile "-------------"
3005LogFile "cat $CMDLINE"
3006LogFile "-------------"
3007cat $CMDLINE >> $LOGFILE
3008LogFile "-------------"
3009LogFile "cat /proc/swaps:"
3010LogFile "-------------"
3011cat /proc/swaps >> $LOGFILE
3012LogFile "-------------"
3013if [ -e /proc/mdstat ]; then
3014 LogFile "cat /proc/mdstat:"
3015 LogFile "-------------"
3016 cat /proc/mdstat >> $LOGFILE
3017else
3018 LogFile "No pseudo file /proc/mdstat"
3019fi
3020LogFile "-------------"
3021LogFile "cat /proc/partitions:"
3022LogFile "-------------"
3023cat /proc/partitions >> $LOGFILE
3024LogFile "-------------"
3025LogFile "cat /proc/filesystems:"
3026LogFile "-------------"
3027cat /proc/filesystems >> $LOGFILE
3028LogFile "-------------"
3029LogFile "lsmod result:"
3030LogFile "-------------"
3031lsmod >> $LOGFILE
3032MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3033if [ -x /usr/sbin/esxcfg-module ]; then
3034 LogFile "-------------"
3035 LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3036 LogFile "-------------"
3037 LogFile "VMWare modules"
3038 LogFile "-------------"
3039 /usr/sbin/esxcfg-module -l >> $LOGFILE
3040 MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3041fi
3042LogFile "Liste of extra modules is:"
3043LogFile "-------------"
3044LogFile "$EXTRA_MODS"
3045LogFile "-------------"
3046LogFile "FORCE_MODS:"
3047LogFile "-------------"
3048LogFile "$FORCE_MODS"
3049LogFile "-------------"
3050LogFile "DENY_MODS:"
3051LogFile "-------------"
3052LogFile "$DENY_MODS"
3053LogFile "-------------"
3054LogFile "df result:"
3055LogFile "----------"
3056df -aT >> $LOGFILE
3057LogFile "-------------"
3058LogFile "df -i result:"
3059LogFile "----------"
3060df -i >> $LOGFILE
3061LogFile "-------------"
3062if [ -r /boot/grub/menu.lst ]; then
3063 LogFile "-------------"
3064 LogFile "INFO: /boot/grub/menu.lst content"
3065 LogFile "-------------"
3066 cat /boot/grub/menu.lst >> $LOGFILE
3067 LogFile "-------------"
3068fi
3069if [ -r /boot/grub/grub.conf ]; then
3070 LogFile "-------------"
3071 LogFile "INFO: /boot/grub/grub.conf content"
3072 LogFile "-------------"
3073 cat /boot/grub/grub.conf >> $LOGFILE
3074 LogFile "-------------"
3075fi
3076if [ -r /boot/grub/grub.cfg ]; then
3077 LogFile "-------------"
3078 LogFile "INFO: /boot/grub/grub.cfg content"
3079 LogFile "-------------"
3080 cat /boot/grub/grub.cfg >> $LOGFILE
3081 LogFile "-------------"
3082fi
3083if [ -r /boot/grub/device.map ]; then
3084 LogFile "-------------"
3085 LogFile "INFO: /boot/grub/device.map content"
3086 LogFile "-------------"
3087 cat /boot/grub/device.map >> $LOGFILE
3088 LogFile "-------------"
3089fi
3090if [ -r /etc/lilo.conf ]; then
3091 LogFile "-------------"
3092 LogFile "INFO: /etc/lilo.conf content"
3093 LogFile "-------------"
3094 cat /etc/lilo.conf >> $LOGFILE
3095fi
3096LogFile "Full fdisk info"
3097LogFile "---------------"
3098$FDISK -l >> $LOGFILE
3099LogFile "----------------"
3100LogFile "List of extra modules is:"
3101LogFile "$EXTRA_MODS"
3102LogFile "-------------"
3103
3104# Compute libata version
3105laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
3106# If libata v2 is used then remove ide-generic as it will perturbate boot
3107if [ "`echo $MODULES | grep libata`" ]; then
3108 if [ "$laver" = "2" ]; then
3109 DENY_MODS="$DENY_MODS ide-generic"
3110 LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3111 LogFile "-------------"
3112 fi
3113fi
3114
3115# Check for McAfee which disturbs the access to some files (tgz in articular)
3116if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3117 LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3118 LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3119 LogFile "WARNING: You have two options:"
3120 LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3121 LogFile "WARNING: - Disable the scanner during the backup"
3122fi
3123
3124# Check for ISO_CMD command
3125if [ ! -x $ISO_CMD ]; then
3126 LogFile "NOTE: No CD image (ISO file) utility found"
3127fi
3128
3129FLOPPY_WAS_MOUNTED=""
3130for mtpt in /media/floppy /mnt/floppy /floppy ; do
3131 if mount | grep -w $mtpt &> /dev/null ; then
3132 FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3133 umount $mtpt
3134 fi
3135done
3136
3137#
3138# If we have a USB device we need to store info
3139# and remove it from the parameters line
3140#
3141if [ "$#" -ne "0" ] ; then
3142 if [ "$1" = "--usb" ] ; then
3143 shift
3144 USBDEVICE=$1
3145 if [ _"$USBDEVICE" = _"" ]; then
3146 Die "No USB device specified"
3147 fi
3148 shift
3149 fi
3150fi
3151
3152if [ "$#" -ne "0" ] ; then
3153 if [ "$1" = "--findkernel" ] ; then
3154 resk=`TryToFindKernelPath`
3155 # Avoids logfile content for mondo
3156 export MONDO_SHARE=""
3157 if [ "$resk" = "" ] ; then
3158 if [ $KERNEL_IS_XEN = "yes" ]; then
3159 echo "$xenkernelpath"
3160 LogFile "INFO: xenkernelpath = $xenkernelpath"
3161 MindiExit 0
3162 else
3163 MindiExit -1
3164 fi
3165 else
3166 echo "$resk"
3167 LogFile "INFO: kernelpath = $resk"
3168 MindiExit 0
3169 fi
3170 elif [ "$1" = "--locatedeps" ] ; then
3171 [ ! "$2" ] && Die "Please specify the binary to look at"
3172 LocateDeps $*
3173 # Avoids logfile content for mondo
3174 export MONDO_SHARE=""
3175 MindiExit $?
3176 elif [ "$1" = "--readalllink" ] ; then
3177 [ ! "$2" ] && Die "Please specify the binary to look at"
3178 # Avoids logfile content for mondo
3179 export MONDO_SHARE=""
3180 ReadAllLink $2
3181 MindiExit $?
3182 elif [ "$1" = "--makemessage" ] ; then
3183 MakeMessageFile | cut -c1-80
3184 MindiExit 0
3185 elif [ "$1" = "--makemountlist" ] ; then
3186 [ ! "$2" ] && Die "Please specify the output file"
3187 MakeMountlist $2
3188 CheckMountlist $2
3189 # Avoids logfile content for mondo
3190 export MONDO_SHARE=""
3191 MindiExit $?
3192 elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3193 echo "Mindi v$MINDI_VERSION"
3194 # Avoids logfile content for mondo
3195 export MONDO_SHARE=""
3196 MindiExit 0
3197 elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3198 MONDO_TMP=$2
3199 # Change MINDI_TMP for the one provided by mondo
3200 # So that it can get back the built files
3201 if [ _"$MONDO_TMP" = _"" ]; then
3202 Die "MONDO_TMP is empty, aborting"
3203 fi
3204 if [ _"$MONDO_TMP" = _"/" ]; then
3205 Die "MONDO_TMP is /, aborting"
3206 fi
3207 mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3208 rmdir $MINDI_TMP
3209 export MINDI_TMP=$MONDO_TMP
3210 mkdir -p $MINDI_TMP
3211
3212 # This is the scratch dir in mondo - subdir images
3213 MINDI_CACHE=$3
3214
3215 kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3216 [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3217
3218###
3219### Sq-Modification...
3220### Attempt to locate kernel specific module path
3221### if module path is found then use it other wise use uname -r to set it...
3222###
3223 if [ $KERNEL_IS_XEN = "yes" ]; then
3224 LogAll "INFO: xenkernelpath = $xenkernelpath"
3225 fi
3226 kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3227 if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3228 then
3229 LogAll "WARNING: Module path for ${kernelpath} not found..."
3230 LogAll " using running kernel\'s modules."
3231 kernelname=$KERVERRUN
3232 else
3233 LogAll "Using modules for kernel: ${kernelname}"
3234 fi
3235 LogAll "INFO: kernelname = $kernelname"
3236 LogAll "INFO: kernelpath = $kernelpath"
3237###
3238### end of Sq-Modification
3239###
3240 TAPEDEV=$5
3241 TAPESIZE=$6
3242 FILES_IN_FILELIST=$7
3243 USE_LZO=$8
3244 CDRECOVERY=$9
3245 if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3246 IMAGE_DEVS=""
3247 else
3248 IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3249 fi
3250 if [ "${11}" ] ; then
3251 LILO_OPTIONS=""
3252 # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3253 fi
3254 LAST_FILELIST_NUMBER=${12}
3255 ESTIMATED_TOTAL_NOOF_SLICES=${13}
3256 export MINDI_EXCLUDE_DEVS="${14}"
3257 USE_COMP="${15}"
3258 USE_LILO="${16}"
3259 USE_STAR="${17}"
3260 INTERNAL_TAPE_BLOCK_SIZE="${18}"
3261 DIFFERENTIAL="${19}"
3262 USE_GZIP="${20}"
3263 NOT_BOOT="${21}"
3264 [ "$USE_COMP" = "" ] && USE_COMP=yes
3265 [ "$USE_GZIP" = "" ] && USE_GZIP=no
3266 [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3267 [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3268 # MONDO_ROOT is the real scratchdir
3269 MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3270 if [ _"$MONDO_ROOT" != _"" ]; then
3271 mkdir -p $MONDO_ROOT
3272 else
3273 Die "MONDO_ROOT is undefined"
3274 fi
3275 else
3276 LogScreen "Syntax: mindi (--custom ....)"
3277 MindiExit -1
3278 fi
3279fi
3280
3281if [ _"$MINDI_CACHE" != _"" ]; then
3282 rm -rf $MINDI_CACHE/* 2> /dev/null
3283 mkdir -p $MINDI_CACHE
3284fi
3285
3286[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3287
3288if [ _"$MONDO_SHARE" = _"" ]; then
3289 LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3290 LogIt "Latest Mindi is available from http://www.mondorescue.org"
3291 LogIt "BusyBox sources are available from http://www.busybox.net"
3292 LogIt "------------------------------------------------------------------------------"
3293else
3294 LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3295fi
3296if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3297 LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3298else
3299 LogIt "ERROR: Unable to find mindi-busybox, please install it"
3300 MindiExit -1
3301fi
3302
3303for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3304 modinfo $i 2> /dev/null 1> /dev/null
3305 if [ $? -eq 0 ]; then
3306 modprobe $i 2>&1 > /dev/null
3307 fi
3308done
3309
3310KERN_DISK_MADE=""
3311
3312LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3313LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3314LogFile "NOT_BOOT = '$NOT_BOOT'"
3315if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3316 LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3317 MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3318 MakeMountlist $MINDI_TMP/mountlist.txt
3319 CheckMountlist $MINDI_TMP/mountlist.txt
3320 mkdir -p $MINDI_TMP/small-all/tmp
3321 cd "$MINDI_TMP/small-all"
3322 cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3323 tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3324 sleep 2
3325 LogIt "Done. Exiting."
3326 MindiExit 0
3327fi
3328
3329if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3330 LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3331fi
3332
3333if [ "$kernelpath" = "" ] ; then
3334 [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3335 echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3336 read ch
3337 if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3338 USE_OWN_KERNEL="yes"
3339 else
3340 USE_OWN_KERNEL="no"
3341 fi
3342 if [ "$USE_OWN_KERNEL" = "yes" ]; then
3343 YOUR_KERNEL_SUCKS=""
3344 kernelpath=`TryToFindKernelPath`
3345 if [ "$kernelpath" = "" ] ; then
3346 echo -n "Please enter kernel path : "
3347 read kernelpath
3348 fi
3349 else
3350 YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3351 fi
3352fi
3353if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3354 # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3355 if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3356 source $MINDI_LIB/FindDistroFailsafe
3357 # Log kernel image
3358 LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3359 kernelpath="$FAILSAFE_KBIN"
3360 LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3361 LogIt " The failsafe kernel is $kernelpath."
3362 LogIt " However, you are still running your kernel. If Mindi fails to create your"
3363 LogIt " disks then it may still be a result of a problem with your kernel."
3364 pwd=`pwd`
3365 cd "$MINDI_TMP"
3366 mkdir -p lib/modules
3367 cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3368 cd "$pwd"
3369 else
3370 kernelpath=$MINDI_LIB/vmlinuz
3371 LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3372 LogIt " However, you are still running your kernel. If Mindi fails to create your"
3373 LogIt " disks then it may still be a result of a problem with your kernel."
3374 pwd=`pwd`
3375 cd "$MINDI_TMP"
3376 bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3377 cd "$pwd"
3378 fi
3379 YOUR_KERNEL_SUCKS="Your kernel sucks"
3380fi
3381echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3382[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3383
3384[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3385
3386PrepareDataDiskImages
3387
3388ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3389rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3390export ramdisk_size=$rds
3391
3392LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3393if [ "$ARCH" = "ia64" ] ; then
3394 PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3395else
3396 PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3397fi
3398
3399[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3400...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3401
3402if [ _"$MONDO_SHARE" = _"" ]; then
3403 ListImagesForUser
3404 OfferToMakeBootableISO
3405 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3406 OfferToMakeBootableUSB
3407 fi
3408 LogAll "Finished."
3409elif [ "$TAPEDEV" ] ; then
3410 if [ "$ARCH" != "ia64" ] ; then
3411 # We need to keep the img file as boot file for ia64 platform
3412 rm -f $MINDI_CACHE/{*img,*iso}
3413 else
3414 rm -f $MINDI_CACHE/*iso
3415 fi
3416 if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3417 OfferToMakeBootableUSB
3418 fi
3419 OfferToMakeBootableISO
3420 if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3421 cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3422 else
3423 Die "Cannot find all.tar.gz, to be written to tape"
3424 fi
3425elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3426 OfferToMakeBootableUSB
3427else
3428 OfferToMakeBootableISO
3429fi
3430# cleanup
3431LogAll "INFO: $FRIENDLY_OUTSTRING"
3432for mtpt in $FLOPPY_WAS_MOUNTED ; do
3433 mount $mtpt
3434done
3435MindiExit 0
Note: See TracBrowser for help on using the repository browser.