Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3339

Visit:

Last change on this file since 3339 was 3339, checked in by Bruno Cornec, 9 years ago
Adds support for Hyper-V IDE driver (Habibija Safet hsafet_at_ping.ba)
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 120.4 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3339 2015-02-12 18:38:18Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
	41	TMPDIR=/tmp
	42
[3033]	43	EXTRA_SPACE=120000 # increase if you run out of ramdisk space
	44	BOOT_SIZE=65600 # size of the boot disk
[747]	45
	46	PROMPT_MAKE_CD_IMAGE="yes"
	47	# Ask if you want to make a CD Image to be written?
	48	# if this is set to 'no', then the image will be created automatically
	49
[1684]	50	PROMPT_MAKE_USB_IMAGE="yes"
	51	# Ask if you want to make a USB Image to be written?
	52	# if this is set to 'no', then the image will be created automatically
	53
[966]	54	USE_OWN_KERNEL="yes"
[747]	55	# If set to "no", you will be prompted for whether or not
	56	# you want to use your own kernel, or the supplied default.
	57	# If "yes" mindi will automatically use your own kernel.
[925]	58
[2629]	59	KERNEL_IS_XEN="no"
	60	# If set to "no", the kernel is not a Xen kernel
	61	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	62	xenkernelpath=""
[2629]	63
[747]	64	MY_FSTAB=/etc/fstab
	65	TAPE_MODS="ht st osst ide-tape ide_tape"
[3332]	66	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
[747]	67
	68	# ide-probe-mod
[3339]	69	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio hv_storvsc"
[747]	70	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3335]	71	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3261]	72	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
[3335]	73	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
[1230]	74	# Replace with that line for HP OCMP e.g.
[2073]	75	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	76	DENY_MODS="kqemu vxfen"
[1399]	77	# Force some modules to be included
[1354]	78	FORCE_MODS=""
[925]	79
[2857]	80	# Find MBR in case of bootable USB device to build
[2855]	81	MBRFILE=/usr/lib/syslinux/mbr.bin
[2857]	82	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	83	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	84	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	85	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[2855]	86
[747]	87	LOGFILE=/var/log/mindi.log
	88	BOOT_MEDIA_MESSAGE="\
[3173]	89	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	90	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	91	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	92	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	93	\n\
	94	You may add one or more parameters as well as per the function keys below\n\
	95	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	96	\n\
	97	If restoring from a local external disk or USB key, do not connect it \n\
	98	until the boot-up has finished.\n\
	99	\n\
	100	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	101	"
[925]	102	FDISK=$MINDI_SBIN/parted2fdisk
[747]	103
[925]	104	# Using a config file allow to overwrite some values
	105	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	106	if [ -f $MINDI_CONFIG ]; then
	107	. $MINDI_CONFIG
	108	fi
[1885]	109	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	110	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	111
[1885]	112	ISO_CMD="/usr/bin/mkisofs"
	113	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
[925]	114
[2457]	115	# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
	116	# However, they use exactly the same command line parameters, so just
	117	# use genisoimage if it's available.
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD=/usr/bin/genisoimage
	120	fi
	121
[2685]	122
[2880]	123	# Function to log on screen only
	124	LogScreen() {
	125	if [ -e /dev/stderr ] ; then
	126	echo -e "$1" >> /dev/stderr
	127	elif [ -e /usr/bin/logger ] ; then
	128	/usr/bin/logger -s $1
	129	fi
	130	}
[2685]	131
[2880]	132	# Function to log in log file only
	133	LogFile() {
	134
	135	echo -e "$1" >> $LOGFILE
	136	if [ _"$2" != _"" ]; then
	137	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
	138	fi
	139	rm -f "$2"
	140	}
	141
	142	# Function to log in both screen and logfile
	143	LogAll() {
	144	LogScreen "$1"
	145	LogFile "$1" "$2"
	146	}
	147
	148	# Preserved for compatibility
	149	LogIt() {
	150	LogAll "$1" "$2"
	151	}
	152
[2963]	153	# Last function called before exiting
	154	# Parameter is exit code value
	155	# Should be declared here as used immediately below potentialy
	156	MindiExit() {
[3149]	157	LogFile "Mindi $MINDI_VERSION is exiting"
	158	LogFile "End date : `date`"
[2963]	159	if [ _"$MONDO_SHARE" != _"" ] ; then
	160	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	161	if [ -f $LOGFILE ]; then
	162	cat $LOGFILE >> /var/log/mondoarchive.log
	163	else
	164	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	165	fi
[2963]	166	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	167	fi
[2880]	168
[2963]	169	cd /
	170	sync&
	171
	172	# Clean temporary files only when standalone mindi
	173	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	174	rm -Rf $MINDI_TMP
	175	fi
	176	exit $1
	177	}
	178
[2685]	179	Die() {
	180	local i
	181	if [ "$1" = "" ] ; then
[3149]	182	LogAll "FATAL ERROR"
[2685]	183	else
[3149]	184	LogAll "FATAL ERROR. $1"
[2685]	185	fi
	186	if [ _"$2" != _"" ]; then
	187	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
	188	fi
	189	rm -f "$2"
	190
[3149]	191	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	192	LogAll "See http://www.mondorescue.org for more information."
	193	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	194	MindiExit -1
	195	}
	196
[1485]	197	# Now we can create what we need
[2150]	198	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	199	if [ $? -ne 0 ]; then
	200	df $TMPDIR
	201	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	202	fi
[2153]	203	if [ _"$MINDI_TMP" = _"" ]; then
	204	Die "MINDI_TMP is empty, aborting"
	205	fi
	206	if [ _"$MINDI_TMP" = _"/" ]; then
	207	Die "MINDI_TMP is /, aborting"
	208	fi
[2150]	209	export MINDI_TMP
[940]	210
[747]	211	# ----------------------------------------------------------------------------
	212
	213
	214	AbortHere() {
	215	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	216	Die "Program is terminating in response to signal received from OS/user"
	217	}
	218
	219
	220	Aborted() {
	221	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	222	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	223	Die "User abort."
	224	}
	225
	226
	227	AddFileToCfgIfExists() {
	228	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	229	}
	230
	231
	232	AddKeyboardMappingFile() {
	233	local mappath r included_list included_item i res ii sss
	234	mappath=$1
	235	KBDEPTH=$(($KBDEPTH+1))
	236	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	237	if [ -e "$bigdir/$mappath" ] ; then
[3149]	238	LogFile "INFO: $mappath already added"
[747]	239	return
	240	elif [ -d "$bigdir/$mappath" ] ; then
	241	echo "Cannot add $mappath: it's a directory. Sorry."
	242	return
	243	fi
[3149]	244	LogFile "INFO: Added kbd map $mappath"
[747]	245	if [ ! -e "$mappath" ] ; then
[3149]	246	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	247	if [ ! -e "$mappath" ] ; then
[3149]	248	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	249	return
	250	fi
	251	else
	252	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
	253	fi
	254
[3231]	255	#cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[3149]	256	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	257	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	258	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	259	else
[3023]	260	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	261	fi
	262	for included_item in $included_list ; do
[925]	263	if [ ! -e "$included_item" ] ; then
[3149]	264	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	265	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	266	for ii in $sss ; do
[747]	267	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	268	done
	269	else
	270	AddKeyboardMappingFile $included_item
	271	fi
[747]	272	done
	273	}
	274
	275
	276	CopyDependenciesToDirectory() {
[3075]	277	local outdir incoming counter d found tdir
[747]	278	outdir=$1
	279	mkdir -p $outdir
	280	incoming=`ReadLine`
	281	counter=0
	282	while [ "$incoming" != "" ] ; do
[1526]	283	# Non absolute file names should not arrive till here => skipped
	284	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	285	LogAll "WARNING: Unable to handle $incoming"
[1526]	286	incoming=`ReadLine`
	287	continue
	288	fi
	289	# no parent directory of incoming should be a link, copy is not possible in that case
	290	d=`dirname "$incoming"`
	291	found="false"
	292	while [ $d != "/" -a $found = "false" ]; do
	293	[ -h "$d" ] && found="true"
	294	d=`dirname "$d"`
	295	done
[3166]	296	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3149]	297	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0
[1526]	298	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	299	if [ ! -h "$incoming" ]; then
	300	tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
	301	else
	302	tdir=`dirname "$incoming"`
	303	if [ ! -e "$outdir/$tdir" ]; then
	304	mkdir -p "$outdir/$tdir"
	305	fi
	306	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	307	fi
[1989]	308	# Only uncompress modules if not using udevd
	309	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	310	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	311	fi
[3075]	312	[ -x "$outdir" ] && StripExecutable $outdir
[925]	313	counter=$(($counter+1))
[3149]	314	LogProgress $counter $2
[747]	315	fi
	316	incoming=`ReadLine`
	317	done
	318	}
	319
	320
	321	CountItemsIn() {
	322	local r
	323	r=0
	324	for q in $1 ; do
	325	r=$(($r+1))
	326	done
	327	echo $r
	328	}
	329
	330
	331	DropOptimizedLibraries() {
	332	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	333	filelist=$1
	334	outdir=$2
	335
	336	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	337	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	338	return 0
[747]	339	fi
	340	echo -en "Dropping i686-optimized libraries if appropriate"
	341	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	342	echo -en "."
	343	reason=""
[1483]	344	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	345	echo "$vanilla_lib_name" >> $filelist
[2963]	346	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	347	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	348	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	349
	350	# This may return multiple files
[3231]	351	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	352	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	353	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	354	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	355	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	356	rmdir $outdir$resolved > /dev/null 2> /dev/null
	357	ln -sf $vanilla_resolved_name $outdir$resolved
	358	LogFile "INFO: Excluding deps $resolved"
	359	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	360	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	361	echo "$vanilla_resolved_name" >> $filelist.tmp
	362	mv -f $filelist.tmp $filelist
	363	fi
[2168]	364	done
[747]	365	done
[925]	366	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	367	mv -f $filelist.tmp $filelist
	368	echo -e "$DONE"
	369	}
	370
	371
	372	FindAndAddUserKeyboardMappingFile() {
	373	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	374	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	375	KEYDIR=/usr/lib/kbd
[747]	376	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[1713]	377	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
	378	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
[3231]	379	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	380	if [ ! -e "$KEYDIR" ] ; then
[3149]	381	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	382	return 0
	383	fi
	384	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	385	LogFile "INFO: Red Hat-style config detected."
[747]	386	keyfile=/etc/sysconfig/keyboard
[3257]	387	elif [ -e "/etc/vconsole.conf" ] ; then
	388	LogFile "INFO: New Fedora style config detected."
	389	keyfile=/etc/vconsole.conf
[747]	390	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	391	LogFile "INFO: Slackware-style config detected."
[747]	392	keyfile=/etc/rc.d/rc.keymap
	393	elif [ -e "/etc/rc.config" ] ; then
[2963]	394	LogFile "INFO: Debian-style config detected."
[747]	395	keyfile=/etc/rc.config
	396	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	397	LogFile "INFO: Debian-style config detected."
[747]	398	mkdir -p $bigdir/tmp
[3278]	399	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	400	KBDEPTH=0
	401	mkdir -p $bigdir/etc/console
[963]	402	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	403	echo ""
[747]	404	echo -e "$DONE"
	405	return 0
[2828]	406	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	407	LogFile "INFO: Ubuntu-style config detected."
[1713]	408	mkdir -p $bigdir/tmp
[2828]	409	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	410	kbdfile="/etc/console-setup/boottime.kmap.gz"
	411	else
	412	kbdfile="/etc/console-setup/cached.kmap.gz"
	413	fi
[3278]	414	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	415	KBDEPTH=0
	416	mkdir -p $bigdir/etc/console-setup
[2828]	417	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	418	echo ""
[1713]	419	echo -e "$DONE"
	420	return 0
[2744]	421	elif [ -e "/etc/rc.conf" ] ; then
[2963]	422	LogFile "INFO: ArchLinux config detected."
[2744]	423	keyfile=/etc/rc.conf
[1465]	424	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	425	LogFile "INFO: Gentoo-style config detected."
[1465]	426	keyfile=/etc/conf.d/keymaps
[3191]	427	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	428	LogFile "INFO: X11-style config detected."
	429	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	430	else
[3149]	431	LogFile "Searching for rc.config ..."
[747]	432	keyfile=`find /etc -name rc.config \| head -n1`
	433	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	434	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	435	return
	436	else
[2963]	437	LogFile "INFO: Found $keyfile"
[747]	438	fi
	439	fi
	440	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	441	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	442	return
	443	fi
[2963]	444	LogFile "INFO: keyfile=$keyfile"
[2999]	445	# For SLES we need to remove the .map.gz extension Cf #614
	446	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	447	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3257]	448	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	449	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[2963]	450	LogFile "INFO: locale=$locale"
[1764]	451	#
	452	# Process the keymaps dir once for all
	453	# AddKeyboardMappingFile will use it recursively
	454	#
	455	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	456	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	457	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	458	# If we have multiple keymaps then log it !!
[3149]	459	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	460	if [ $? -eq 0 ]; then
[2963]	461	LogAll "WARNING: Multiple keymaps found: $mp"
	462	LogFile "INFO: The following one will be used"
[747]	463	fi
	464	for i in $mp ; do
	465	mappath=$i
	466	[ -e "$i" ] && [ ! -d "$i" ] && break
	467	done
	468	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[2958]	469	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
[747]	470	fi
[2963]	471	LogFile "INFO: mappath = $mappath"
[747]	472	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	473	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	474	return
	475	fi
[3149]	476	LogAll "INFO: Adding the following keyboard mapping tables: "
[747]	477	mkdir -p $bigdir/tmp
[3278]	478	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	479	KBDEPTH=0
[747]	480	AddKeyboardMappingFile $mappath
[2864]	481	echo ""
[747]	482	echo -e "$DONE"
[1764]	483	rm -f $MINDI_TMP/keymaps.find
[747]	484	return 0
	485	}
	486
	487
[3241]	488	FindLdlinux32Binary() {
	489	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	490	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	491	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	492	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	493	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	494	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	495	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	496	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	497	if [ ! -e "$LDLINUXC32" ]; then
	498	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	499	LDLINUXC32=/tmp/idoesnthopefullyexist
	500	else
	501	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	502	fi
	503	}
	504
	505
[2629]	506	FindMboot32Binary() {
	507	MBOOTC32=/usr/lib/syslinux/mboot.c32
	508	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	509	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	510	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	511	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	512	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	513	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	514	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	515	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	516	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	517	}
	518
[747]	519	FindIsolinuxBinary() {
	520	ISOLINUX=/usr/lib/isolinux.bin
	521	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	522	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	523	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	524	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	525	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	526	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	527	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	528	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	529	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	530	}
	531
	532
	533	GenerateGiantDependencyList() {
	534	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
	535
	536	echo -en "Analyzing dependency requirements"
	537	outfile=$1
[940]	538	tempfile=$MINDI_TMP/$$.txt
[747]	539	incoming=`ReadLine`
	540
	541	> $tempfile
	542	progress=0
	543	res=0
	544	noof_lines=$2
	545	while [ "$incoming" != "" ] ; do
[861]	546	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	547	incoming=`ReadLine`
	548	continue
	549	fi
	550	if [ "$incoming" = "LVMFILES:" ] ; then
	551	break
	552	fi
[747]	553	filelist=`GenerateListForFile "$incoming"`
	554	r=$?
[3149]	555	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	556	res=$(($res+$r))
[2963]	557	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	558	for fname in $filelist ; do
[3321]	559	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	560	done
	561	progress=$(($progress+1))
[3149]	562	LogProgress $progress $noof_lines
[747]	563	incoming=`ReadLine`
	564	done
[861]	565	if [ "$incoming" = "LVMFILES:" ] ; then
	566	incoming=`ReadLine`
	567	lvmversion=""
	568	while [ "$incoming" != "" ] ; do
	569	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	570	incoming=`ReadLine`
	571	continue
	572	fi
	573	filelist=`GenerateListForFile "$incoming"`
	574	for tool in $filelist ; do
	575	lvmresolved=`readlink -f $tool`
[1342]	576	if [ "$tool" = "$lvmresolved" ]; then
[861]	577	echo "$tool" >> $tempfile
	578	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	579	if [ "$lvmversion" = "" ] ; then
	580	lvmversion=`$lvmresolved`
	581	echo "$lvmresolved" >> $tempfile
	582	fi
	583	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	584	if [ "$lvmversion" = "200" ]; then
[861]	585	# pvdata and lvmcreate_initrd don't exist in LVM2
	586	case "$toolstripped" in
	587	"pvdata")
	588	continue
	589	;;
	590	"lvmcreate_initrd")
	591	continue
	592	;;
	593	esac
	594	fi
	595	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	596	if [ -e "$toolpath" ] ; then
	597	echo "$toolpath" >> $tempfile
	598	echo "$tool" >> $tempfile
	599	else
	600	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	601	fi
	602	if [ -e "$toolpath" ] ; then
	603	echo "$toolpath" >> $tempfile
	604	echo "$tool" >> $tempfile
	605	else
	606	echo "Where are your LVM-Tools? Couldn't find $tool"
	607	fi
	608	else
	609	echo "$tool" >> $tempfile
	610	fi
	611	done
	612	progress=$(($progress+1))
[3149]	613	LogProgress $progress $noof_lines
[861]	614	incoming=`ReadLine`
	615	done
[747]	616	fi
	617	echo -en "$DONE\nMaking complete dependency list"
	618
	619	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	620	mv -f $tempfile.new $tempfile
	621	> $outfile.pre
	622	progress=0
	623	noof_lines=`cat $tempfile \| wc -l`
[2963]	624	LogFile "---------------------------------"
	625	LogFile "List of dependencies: "
	626	LogFile "---------------------------------"
[747]	627	for fname in `cat $tempfile` ; do
[1876]	628	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	629	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	630	progress=$(($progress+1))
[3149]	631	LogProgress $progress $noof_lines
[747]	632	done
[1684]	633	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	634	mkdir -p $bigdir/tmp
[3172]	635	mkdir -p $bigdir/usr/bin
[940]	636	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	637	LogAll "\nINFO: Incorporating post-nuke tarball"
[925]	638	old_pwd=`pwd`
[2712]	639	cd "$bigdir"
[3149]	640	tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
[2712]	641	cd "$old_pwd"
[747]	642	fi
[963]	643	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	644	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	645	else
[2963]	646	LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	647	LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
	648	LogIt " If Mindi was called by Mondo then send me a bug report."
	649	LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	650	LogIt " Finally, run Mindi again."
[925]	651	Die "Odd."
	652	fi
[2963]	653	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	654	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	655	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	656	for r in NETFS-* ; do
[963]	657	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	658	LogFile "INFO: Copying $r to ramdisk"
[925]	659	done
	660	fi
[747]	661	fi
[925]	662	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	663	rm -f $tempfile $outfile.pre
	664	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	665	return $res
	666	}
	667
	668
	669	GenerateListForFile() {
	670	local files_found loc fname incoming i res
	671	incoming="$1"
	672	files_found=""
	673	res=0
	674
	675	for fname in $incoming ; do
	676	files_found="$files_found `LocateFile $fname`"
	677	done
	678
	679	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	680	}
	681
	682
	683	# Returns all disk devices which are part of a raid array
	684	GetAllRaidMembers() {
	685	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	686	}
	687
	688
	689	GetFileSizeList() {
	690	local i
	691	for i in `find $1 -type d -o -print` ; do
	692	du -sk $i
	693	done
	694	}
	695
	696
[1230]	697	# Check kernel filesystem capabilites for accessing initrd image
[2429]	698	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	699	#
	700	# Interface definition:
	701	# param #1: absolute path to kernel image
	702	GetInitrdFilesystemToUse() {
	703
	704	# interface test: make sure we have one parameter
	705	if [ $# -ne 1 ]; then
	706	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	707	fi
	708
	709	# interface parameters
	710	local lvKernelImage=$1
	711
	712	# local constants (filesystem magic strings)
	713	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	714	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	715	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3257]	716	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|<6>Trying to unpack rootfs image as initramfs"
[1230]	717
	718	# local variables
	719	local lvOffset
	720	local lvScanRes
	721	local lvUseFilesystem
	722
	723	# say where we are.
[3111]	724	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	725
	726	# verify that file exists
	727	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	728
[3111]	729	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	730	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	731	if [ $? -eq 0 ]; then
[3111]	732	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	733	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	734	else
	735	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	736	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	737	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	738	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	739	if [ $lvOffset -eq 0 ]; then
	740	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	741	lvScanRes=$lcMagicInitfs
[2393]	742	else
[3111]	743	lvOffset=`expr $lvOffset / 2`
	744	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	745	# scan again kernel image
	746	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	747	fi
[3111]	748	fi
[2393]	749
[3111]	750	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	751	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	752	lvUseFilesystem="ext2fs"
	753	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	754	lvUseFilesystem="ext3fs"
	755	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	756	lvUseFilesystem="initramfs"
	757	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	758	lvUseFilesystem="cramfs"
[2429]	759	else
[3111]	760	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	761	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	762	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	763	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	764	lvUseFilesystem="initramfs"
	765	fi
[3111]	766
[1230]	767	# say what we are using
[3111]	768	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	769
	770	# return file system to use
	771	echo "$lvUseFilesystem"
	772
	773	}
	774
[747]	775	# Searches members of raid device
	776	# $1: raid device (/dev/md...)
	777	GetRaidDevMembers() {
[2917]	778	if [ ! -f /etc/raidtab ]; then
	779	return
	780	fi
[747]	781	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	782	}
	783
	784
	785	ListAllPartitions() {
	786	local res currline partition all_partitions ap_orig remaining i j
	787
[2070]	788	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	789	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	790	if [ -e "/vmfs/volumes" ]; then
	791	# For VMWare ESX 3 get the device names of these volumes
[2431]	792	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	793	fi
[747]	794	return
	795	}
	796
	797
	798	ListImagesForUser() {
	799	local path fname
[1983]	800	path=$MINDI_CACHE
[747]	801	echo -en "In the directory '$path' you will find the images:-\n"
	802	for fname in `ls $path \| grep -F mindi-` ; do
	803	printf "%19s " $fname
	804	done
	805	echo " "
	806	}
	807
	808
	809	ListKernelModulePaths() {
[2583]	810	local module_list module fname r kern
[1399]	811	module_list="$MODULES"
[1230]	812	# Remove unwanted modules from list
	813	for i in $DENY_MODS; do
	814	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	815	done
[747]	816	###
	817	### Sq-Modification ... Use kernelname for module search path if specified
	818	###
[3231]	819	if [ "${kernelname}" != "" ]
[747]	820	then
	821	kern=${kernelname}
	822	else
[2292]	823	kern="$KERVERRUN"
[747]	824	fi
[2292]	825	export KERVER=$kern
[747]	826	###
	827	### Sq-Mod End
	828	###
[3310]	829	# Get rid of duplicates
	830	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	831	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	832	if [ -z "$r" ]; then
	833	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	834	r="[live module file not found]"
	835	else
	836	r="[extra module file not found]"
	837	fi
[2583]	838	else
	839	[ -f "$r" ] && echo "$r"
[2471]	840	fi
[2963]	841	LogFile "INFO: module $module --> $r"
[747]	842	done
	843	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	844	}
	845
[1784]	846	#
	847	# Critical function which computes all dependencies (dyn. lib.)
	848	# for a list of binaries
	849	#
[747]	850	LocateDeps() {
	851	local incoming fname deps
[1724]	852	incoming="$*"
[3231]	853	deps=""
	854
[747]	855	for fname in $incoming ; do
	856	if [ ! -e "$fname" ] ; then
[2995]	857	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	858	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	859	LogFile " This warning only affects you if you are using LVM."
[1399]	860	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	861	LogFile " I think you are, so please take heed!"
[747]	862	else
[3231]	863	LogFile " I don't think you are, so don't worry about it."
[747]	864	fi
	865	fi
	866	else
[3231]	867	deps="$deps $fname"
[747]	868	fi
	869	done
[3231]	870	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
[747]	871	}
	872
[925]	873
[747]	874	LocateFile() {
[3231]	875	local i j path fname_to_find location output resolved tmp stub cache_id loclist
[747]	876	fname_to_find="$1"
[1526]	877	# It's an absolute path
[3231]	878	j=`echo "$fname_to_find" \| cut -c1`
	879	if [ _"$j" = _"/" ]; then
	880	dn=`dirname $fname_to_find`
	881	# We suppose that the link is already included, just add the new file
	882	if [ -h "$dn" ]; then
	883	newdn=`readlink -f $dn`
	884	bn=`basename $fname_to_find`
	885	output="$newdn/$bn"
	886	else
	887	output="$fname_to_find"
	888	fi
[860]	889	if [ -h "$output" ] ; then
[3231]	890	output="`mr-read-all-link $output` $output"
[860]	891	fi
[859]	892	echo "$output"
	893	return 0
[747]	894	fi
[1526]	895	# It's not an absolute path
[747]	896	output=""
[1526]	897	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	898	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	899	[ -h "$path" ] && continue
	900	[ ! -e "$path/$fname_to_find" ] && continue
	901	output="$path/$fname_to_find $output"
	902	if [ -h "$path/$fname_to_find" ] ; then
[3231]	903	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	904	fi
[747]	905	done
	906	if [ "$output" = "" ] ; then
[860]	907	return 1
[747]	908	fi
	909	echo "$output"
	910	return 0
	911	}
	912
[3149]	913	LogProgress() {
[3293]	914	local i progress modres noof_lines title
[3149]	915
	916	progress=$1
	917	noof_lines=$2
[3293]	918	title=$3
[747]	919
[3149]	920	i=$(($progress*100))
	921	if [ $noof_lines -ne 0 ]; then
	922	i=$(($i/$noof_lines))
	923	else
	924	i=0
	925	fi
[3293]	926
	927	if [ _"$MONDO_SHARE" != _"" ]; then
	928	echo "$title $i%"
	929	else
	930	echo -en "\r\t\t\t\t\t\t\t\t"
	931	echo -en "$i"
	932	echo -en "%"
	933	modres=$(($progress%4))
	934	[ "$modres" -eq "0" ] && echo -en "\t/"
	935	[ "$modres" -eq "1" ] && echo -en "\t-"
	936	[ "$modres" -eq "2" ] && echo -en "\t\\"
	937	[ "$modres" -eq "3" ] && echo -en "\t\|"
	938	fi
[3149]	939	}
	940
[3278]	941	# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
[747]	942	MakeMondoConfigFile() {
	943	local outfile use_lzo use_comp use_star
	944	outfile=$1
	945	> $outfile
	946	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	947	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	948	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	949	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	950	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	951	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	952	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	953	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	954	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	955	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	956	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	957	echo "use-lzo $use_lzo" >> $outfile
[998]	958	echo "use-gzip $use_gzip" >> $outfile
[747]	959	echo "use-star $use_star" >> $outfile
[3149]	960	echo "use-lzma $use_lzma" >> $outfile
[747]	961	echo "use-comp $use_comp" >> $outfile
	962	echo "datestamp `date`" >> $outfile
	963	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	964	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	965	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	966	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	967	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	968	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	969	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	970	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	971	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	972	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	973	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	974	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	975	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	976	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	977
[3270]	978	# Deal with network configuration in a portable way
	979	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	980	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	981	fi
[747]	982	}
	983
[2618]	984	# Get PV's for an LV
	985	GetPVsForLV() {
	986	if [ -n "$1" ]; then
	987	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	988	if [ -z "$vg" ]; then
	989	return
	990	fi
	991	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	992	fi
	993	}
[747]	994
[2618]	995
[747]	996	MakeMountlist() {
[2907]	997	local mountlist all_partitions current_partition \
[747]	998	partition_size partition_format outstring partition_number \
	999	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1000	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1001
[3149]	1002	LogFile "------------------------------------"
[2963]	1003	LogFile "Your raw fstab file looks like this:"
	1004	LogFile "------------------------------------"
[747]	1005	cat $MY_FSTAB >> $LOGFILE
[3149]	1006	LogAll "-----------------------------------"
[2963]	1007	LogAll "Your mountlist will look like this:"
[3149]	1008	LogAll "-----------------------------------"
[747]	1009
[2907]	1010	# mountlist(OUT)
[747]	1011	mountlist=$1
	1012
	1013	# NB: partition = device
	1014	# NB: mountpt = where the device is mounted
	1015
	1016	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1017
[1684]	1018	[ "$mountlist" != "" ] && rm -Rf $mountlist
[747]	1019	> $mountlist
	1020	all_partitions=""
	1021
	1022	if [ $LVM != "false" ]; then
[3149]	1023	LogAll "INFO: Analyzing LVM..."
[968]	1024	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1025	if [ $? -ne 0 ]; then
[963]	1026	LVM="false"
	1027	fi
[2536]	1028	# Excluded LVs and GVs are not reported here
[2424]	1029	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1030	fi
	1031	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1032	for i in $IMAGE_DEVS ; do
	1033	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1034	done
	1035	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1036	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1037	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1038	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1039	for c_p in $all_partitions ; do
[2917]	1040	# Skip fd/cd devices, network FS, cifs
[2452]	1041	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1042	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1043	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1044	current_partition=`readlink -f $c_p`
[3046]	1045	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1046	current_partition="$c_p"
	1047	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1048	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1049	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1050	fi
[747]	1051	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1052	else
	1053	current_partition="$c_p"
	1054	fi
	1055	[ "$c_p" = "none" ] && continue
	1056	redhat_label=""
[1831]	1057	label=""
[957]	1058	uuid=""
[861]	1059	absolute_partition=`readlink -f $c_p`
[2965]	1060	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1061
[1986]	1062	# set default in case we dont't find it
	1063	str_to_find_fmt_with=$current_partition
	1064
[747]	1065	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1066	# current_partition contains only first column of /etc/fstab
[2965]	1067	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1068	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1069	actual_dev=""
[853]	1070
	1071	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1072	if [ -x "/sbin/findfs" ]; then
[2847]	1073	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1074	fi
[747]	1075
[853]	1076	# 2nd try : blkid, the good way for all LABEL except swap
	1077	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1078	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1079	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1080	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1081	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1082	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1083	for dev in `ls /dev/mapper/*`; do
[963]	1084	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1085	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1086	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1087	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1088	break
	1089	fi
	1090	done
	1091	fi
	1092	fi
	1093
[853]	1094	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1095	# For LVM gives a /dev/mapper entry
	1096	if [ "x$actual_dev" = "x" ]; then
[2965]	1097	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1098	fi
	1099
[853]	1100	# 4th try, with vol_id
[747]	1101	# SWAP only
	1102	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1103	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1104	for dev_swap in $list_swaps ; do
[2965]	1105	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1106	if [ "x$dev_exists" != "x" ]; then
	1107	actual_dev=$dev_swap
	1108	break;
	1109	fi
	1110	done
	1111	fi
	1112
[853]	1113	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1114	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1115	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1116	# SWAP only
[2965]	1117	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1118	skip=""
[2292]	1119	uname=$KERVERRUN
[2013]	1120	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1121	# 2.6.12 needs 16 (FC3)
	1122	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1123	# 2.6.19 and upper needs 1052
	1124	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1125	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1126	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1127	if [ $skip = "" ]; then
	1128	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1129	fi
[853]	1130	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1131	do
	1132	# Location of the swap label for kernel 2.6
[2013]	1133	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1134	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1135	actual_dev=$try_dev
[853]	1136	fi
	1137	done
[747]	1138	fi
[1008]	1139
	1140	# Check if one of all those tries has known success
	1141	if [ "x$actual_dev" != "x" ]; then
	1142	current_partition=$actual_dev
	1143	else
[1885]	1144	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1145	fi
[957]	1146	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1147	# current_partition contains only first column of /etc/fstab
[2965]	1148	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1149	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1150	actual_dev=""
	1151
	1152	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1153	if [ -x "/sbin/findfs" ]; then
	1154	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1155	fi
	1156
[1531]	1157	# 2nd try : blkid, the good way for all UUID except swap
[957]	1158	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1159	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1160	# For LVM FS it will give a /dev/dm-# which should then be converted
	1161	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1162	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1163	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1164	for dev in `ls /dev/mapper/*`; do
[963]	1165	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1166	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1167	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1168	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1169	break
	1170	fi
	1171	done
	1172	fi
	1173	fi
	1174
	1175	# 3th try, with vol_id
	1176	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1177	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1178	for dev in $list_dev ; do
[2965]	1179	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1180	if [ "x$dev_exists" != "x" ]; then
	1181	actual_dev=$dev
	1182	break;
	1183	fi
	1184	done
	1185	fi
	1186
[1531]	1187	# 4th try, with dumpuuid (VMWare only ?) for swap
	1188	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1189	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1190	for dev in $list_dev ; do
[2965]	1191	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1192	if [ "x$dev_exists" != "x" ]; then
	1193	actual_dev=$dev
	1194	break;
	1195	fi
	1196	done
	1197	fi
	1198
[747]	1199	# Check if one of all those tries has known success
	1200	if [ "x$actual_dev" != "x" ]; then
	1201	current_partition=$actual_dev
	1202	else
[2069]	1203	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1204	fi
	1205	else
[1863]	1206	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1207	# they use symlinks in fstab unrelated to what is shown in mount !
	1208	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1209	# set default in case we dont't find it
[2965]	1210	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1211	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1212	str_to_find_fmt_with=$tmpp
[2965]	1213	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1214	break;
[1863]	1215	fi
	1216	done
	1217	fi
[747]	1218	fi
	1219
[3084]	1220	# Detects noauto partitions not mounted and exclude them
	1221	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1222	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1223	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1224	continue
	1225	fi
	1226	# Detects bind partitions and exclude them
	1227	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1228	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1229	continue
	1230	fi
	1231
[2566]	1232	# Look for devices which have to be excluded
	1233	skip=0
	1234	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1235	l=""
[3231]	1236	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1237	for d in $list_of_devices; do
[2579]	1238	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1239	done
[2618]	1240
	1241	# Remove PVs from LVs excluded
	1242	l="$l `GetPVsForLV $current_partition`"
	1243
	1244	# We want a single unique list
[2568]	1245	list_of_devices="`echo $l \| sort -u`"
[2618]	1246
[2854]	1247	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1248	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1249	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1250	skip=1
	1251	continue
	1252	fi
	1253	done
	1254	fi
	1255	if [ $skip -eq 1 ]; then
	1256	continue
	1257	fi
	1258
[747]	1259	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1260	# Detects iso9660 ISO images and exclude them
	1261	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1262	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1263	continue
	1264	fi
[747]	1265	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1266	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1267	# the former is then a link to the latter, so we test whether
	1268	# $current_partition is actually such a link or not and set
[755]	1269	# $current_lvolume accordingly. On Debian you may find more than one answer
	1270	# so we remove the one corresponding to /dev/.static
	1271	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1272	# principle is the same and we need to find the link to it as well.
	1273	# Note that $current_lvolume may well be an
[747]	1274	# ordinary device. It is just to make sure that we feed the right value
	1275	# into any of the LVM tools if possible.
	1276
[3064]	1277	current_lvolume="$current_partition"
[763]	1278	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1279	# .static dir are a Debian specificity
[763]	1280	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1281	echo $current_lvolume \| grep -q ' '
[784]	1282	if [ $? -eq 0 ]; then
[2963]	1283	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1284	fi
[2072]	1285	# if it's not found, it may well be a real device such as a multipath one
	1286	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1287	if [ _"$current_lvolume" = _"" ]; then
	1288	current_lvolume="$current_partition"
	1289	fi
[747]	1290	fi
	1291	#
	1292	# End of LVM device style variation code (other than $current_lvolume).
	1293
[745]	1294	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1295	# Size computed via LVM not directly
[747]	1296	partition_size="lvm"
	1297	else
	1298	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1299	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1300	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1301	# Skip swap files
	1302	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1303	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1304	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
	1305	[ "$partition_format" != "swap" ] && partition_format="swap"
	1306	if [ "$partition_size" = "" ] ; then
	1307	totalsize=0
	1308	items=0
	1309	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
	1310	totalsize=$(($totalsize+$i))
	1311	items=$(($items+1))
	1312	done
	1313	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1314	[ "$partition_size" -lt "125000" ] && partition_size=125000
[2963]	1315	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1316	fi
[2947]	1317	else
	1318	partition_size=`SizeOfPartition $current_partition`
[747]	1319	fi
	1320	fi
	1321	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1322	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1323	if [ "$partition_mountpt" = "" ] ; then
	1324	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1325	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1326	partition_mountpt="raid"
	1327	partition_format="raid"
	1328	else
	1329	partition_mountpt="lvm"
	1330	partition_format="lvm"
	1331	fi
	1332	fi
	1333	fi
	1334	psz=$partition_size
[2963]	1335	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1336	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1337	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1338	partition_mountpt="image"
	1339	old_partition_fmt=$partition_format
	1340	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1341	partition_size=$(($partition_size+1)); # just in case
	1342	if [ "$partition_format" = "Linux" ] ; then
[2963]	1343	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1344	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1345	partition_format=$old_partition_fmt
	1346	fi
	1347	fi
[2566]	1348
[747]	1349	if [ ! "$partition_mountpt" ] ; then
[2963]	1350	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1351	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1352	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1353	[ "$partition_format" ] && break
	1354	done
[2963]	1355	LogFile "------- $FDISK log end ------------"
[747]	1356	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1357	partition_format="compaq"
	1358	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1359	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1360	continue
	1361	fi
	1362	fi
[1755]	1363	if [ "$redhat_label" ]; then
	1364	label="$redhat_label"
[1756]	1365	elif [ "$uuid" ]; then
[1755]	1366	label="$uuid"
	1367	fi
[3330]	1368
	1369	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1370	# in order to mount the root part e.g. in grub.
	1371	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1372	# restored correctly
	1373	if [ _"$label" = _"" ]; then
	1374	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1375	fi
	1376
[747]	1377	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1378	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1379	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1380	if [ "$current_partition" = "" ] ; then
[2963]	1381	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1382	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1383	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1384	partition_mountpt=raid
	1385	partition_format=raid
[3149]	1386	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1387	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1388	else
[2963]	1389	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1390	fi
	1391	elif [ "$partition_format" = "" ] ; then
[2963]	1392	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1393	elif [ "$partition_size" = "" ] ; then
[2963]	1394	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1395	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1396	continue
	1397	else
	1398	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[2963]	1399	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1400	partition_format="vfat"
	1401	fi
[3149]	1402	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1403	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1404	fi
	1405	done
[3149]	1406	LogAll "-----------------------------------"
[747]	1407	}
	1408
[2432]	1409	CheckMountlist() {
	1410	local file=$1
	1411	# Coherency verification
[2529]	1412	ML01=`cat $file \| wc -l`
[2995]	1413	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1414	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1415	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1416	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1417	LogFile "--------------------------------------------"
[3081]	1418	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1419	LogFile "--------------------------------------------"
[2432]	1420	fi
[2529]	1421	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1422	LogFile "--------------------------------------------"
	1423	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1424	LogFile "------------------------------------------------"
[2432]	1425	fi
	1426	}
[747]	1427
	1428	OfferToMakeBootableISO() {
	1429	local i old_pwd
[2457]	1430	if [ -z "$ISO_CMD" ]; then
[3149]	1431	LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
[2457]	1432	return
	1433	fi
[1684]	1434	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[966]	1435	echo -en "Shall I make a bootable CD image? (y/[n]) "
[747]	1436	read i
	1437	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1438	fi
[940]	1439	rm -Rf $MINDI_TMP/iso
[1983]	1440	mkdir -p $MINDI_TMP/iso/{images,archives}
[2963]	1441	LogFile "INFO: mindi_lib = $MINDI_LIB"
[3149]	1442	cp -f $MINDI_CACHE/{.gz,.img} $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
[747]	1443	for i in memdisk memtest.bin memtest.img ; do
[953]	1444	j=$MINDI_LIB/$i
[1983]	1445	k=$MINDI_TMP/iso
[953]	1446	if [ -e "$j" ] ; then
[3149]	1447	LogAll "INFO: Copying $j to $k"
[2092]	1448	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
	1449	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
[1885]	1450	if [ _"$MONDO_SHARE" != _"" ]; then
	1451	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
	1452	fi
[953]	1453	fi
[747]	1454	done
[3173]	1455	MakeMessageFile $MINDI_TMP/iso \| cut -c1-80 > $MINDI_TMP/iso/message.txt
[2629]	1456	if [ $KERNEL_IS_XEN = "yes" ]; then
[3241]	1457	FindMboot32Binary
[2629]	1458	cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
	1459	cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
	1460	fi
[3241]	1461	# Useful for syslinux 5.x
	1462	FindLdlinux32Binary
	1463	if [ -e $LDLINUXC32 ]; then
	1464	cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
	1465	fi
[2681]	1466	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
	1467	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
[2629]	1468
[1885]	1469	if [ _"$MONDO_SHARE" != _"" ]; then
[2681]	1470	if [ $KERNEL_IS_XEN = "yes" ]; then
[3261]	1471	cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
	1472	cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
[2681]	1473	fi
[3241]	1474	if [ -e $LDLINUXC32 ]; then
[3261]	1475	cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
[3241]	1476	fi
[1929]	1477	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
[1983]	1478	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
[1885]	1479	fi
[2073]	1480	MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
[747]	1481	if [ "$ARCH" != "ia64" ] ; then
[2092]	1482	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
[747]	1483	fi
[1983]	1484	old_pwd=`pwd`
[2712]	1485	cd "$MINDI_TMP/iso"
[747]	1486	if [ "$ARCH" != "ia64" ] ; then
[1885]	1487	if [ _"$MONDO_SHARE" != _"" ]; then
[3173]	1488	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
[3241]	1489	if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
	1490	cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
	1491	fi
[2681]	1492	if [ $KERNEL_IS_XEN = "yes" ]; then
	1493	cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
[2629]	1494	fi
[1983]	1495	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
[1885]	1496	fi
[1983]	1497	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1498	else
[1983]	1499	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1500	fi
	1501	if [ "$?" -ne "0" ] ; then
[2963]	1502	LogFile "----------- $ISO_CMD's errors --------------"
	1503	LogAll "$ISO_CMD returned the following errors:"
	1504	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
[3149]	1505	LogAll "ERROR: Failed to create ISO image."
[747]	1506	else
[2963]	1507	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
[747]	1508	fi
[940]	1509	rm -f $MINDI_TMP/mkisofs.log
[2712]	1510	cd "$old_pwd"
[747]	1511	}
	1512
	1513
[1684]	1514	OfferToMakeBootableUSB() {
[2041]	1515	local i
[1684]	1516	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[2621]	1517	echo -n "Shall I make a bootable USB device ? (y/[n]) "
[1764]	1518	read i
	1519	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1520	if [ "$USBDEVICE" = "" ]; then
	1521	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1522	read dev
	1523	USBDEVICE=$dev
[1722]	1524	fi
[1764]	1525	echo "WARNING: This will erase all content on $USBDEVICE"
	1526	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
[2040]	1527	read i
	1528	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
[1684]	1529	fi
	1530	rm -Rf $MINDI_TMP/usb
	1531	mkdir -p $MINDI_TMP/usb
	1532	USBPART="${USBDEVICE}1"
	1533
	1534	echo -en "Transforming $USBDEVICE in a Bootable device "
	1535	echo -en "."
[2963]	1536	LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
	1537	LogFile "INFO: Checking $USBDEVICE"
[2924]	1538	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1539	if [ $? -ne 0 ]; then
[2963]	1540	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1541	LogAll " Make sure your USB device is plugged in"
[2963]	1542	MindiExit -1
[1684]	1543	fi
	1544	echo -en "."
[3149]	1545	# Some distro do auto mount at that point (Ubuntu)
[2963]	1546	LogFile "INFO: Unmounting $USBPART just in case"
[1721]	1547	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[2057]	1548	# If your key has no MBR it may cause an issue
	1549	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
[2855]	1550	if [ -r $MBRFILE ]; then
[2963]	1551	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[2855]	1552	dd if=$MBRFILE of=$USBDEVICE
	1553	else
[2963]	1554	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1555	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
[2855]	1556	fi
[2963]	1557	LogFile "INFO: Preparing $USBDEVICE"
[2851]	1558	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1559	d
	1560	d
	1561	d
	1562	d
[1684]	1563	n
	1564	p
	1565	1
	1566
	1567
	1568	t
	1569	b
	1570	a
	1571	1
	1572	w
	1573	EOF
[2851]	1574	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1575	if [ $? -ne 0 ]; then
[2963]	1576	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1577	LogAll " Make sure your USB device is plugged in"
[1684]	1578	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1579	MindiExit -1
	1580	fi
[2963]	1581	LogFile "fdisk build file"
	1582	LogFile "----------------"
[2851]	1583	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1584	LogFile "----------------"
[2924]	1585	rm -f $MINDI_TMP/fdisk.txt
[2963]	1586	LogFile "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1587	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[1684]	1588	echo -en "."
[3006]	1589	# Calling kpartx in case devices were not created
[3033]	1590	if [ -x "/sbin/kpartx" ]; then
[3027]	1591	/sbin/kpartx -a $USBDEVICE
	1592	fi
[2461]	1593	# Some distro do auto mount at that point (Ubuntu)
[2963]	1594	LogFile "INFO: Unmounting $USBPART just in case again"
[2461]	1595	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
	1596	echo -en "."
[3086]	1597	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1598	if [ "`which dmsetup`" != "" ]; then
	1599	block_id="`echo $USBPART \| sed 's\|/dev/\|\|g'`"
	1600	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
	1601	LogFile "INFO: Removing $block_id from device mapper."
	1602	sleep 1
	1603	dmsetup remove $block_id
	1604	fi
	1605	fi
	1606	echo -en "."
[2963]	1607	LogFile "INFO: Creating a vfat filesystem on $USBPART"
[1688]	1608	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
[1684]	1609	if [ $? -ne 0 ]; then
[2963]	1610	LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
[3086]	1611	LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
[1684]	1612	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1613	MindiExit -1
	1614	fi
	1615	echo -en "."
[2963]	1616	LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
[1684]	1617	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
	1618	if [ $? -ne 0 ]; then
[2963]	1619	LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
[3086]	1620	LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
[1684]	1621	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1622	MindiExit -1
	1623	fi
	1624	echo -en "."
[1691]	1625	mkdir -p $MINDI_TMP/usb/images
[3149]	1626	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
[1684]	1627	echo -en "."
[2963]	1628	LogFile "INFO: mindi_lib = $MINDI_LIB"
[1684]	1629	for i in memdisk memtest.bin memtest.img ; do
	1630	j=$MINDI_LIB/$i
	1631	k=$MINDI_TMP/usb
	1632	if [ -e "$j" ] ; then
[2963]	1633	LogIt "INFO: Copying $j to $k"
[2092]	1634	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
	1635	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
[1684]	1636	fi
	1637	done
	1638	echo -en "."
[3173]	1639	MakeMessageFile $MINDI_TMP/usb \| cut -c1-80 > $MINDI_TMP/usb/message.txt
[1684]	1640	echo -en "."
[2092]	1641	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
[1684]	1642	echo -en "."
[1983]	1643	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
[1684]	1644	echo -en "."
[2041]	1645	MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
[1684]	1646	echo -en "."
[2963]	1647	LogAll "----------- syslinux's conf --------------"
[2476]	1648	cat $MINDI_TMP/usb/syslinux.cfg \|tee -a $LOGFILE
[2963]	1649	LogAll "------------------------------------------"
[1721]	1650	umount $MINDI_TMP/usb
[1684]	1651	if [ "$ARCH" != "ia64" ] ; then
[2939]	1652	syslinux -v 2>&1 \| grep -q 4.02
	1653	if [ $? -eq 0 ]; then
	1654	# This buggy version of syslinux requires a call to --stupid and not -s
	1655	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1656	res=$?
	1657	else
	1658	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1659	res=$?
	1660	fi
	1661	if [ $res -ne 0 ] ; then
[2963]	1662	LogAll "----------- syslinux's errors --------------"
[1684]	1663	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1664	LogAll "------------------------------------------"
	1665	LogIt "ERROR: Failed to create USB image."
[1684]	1666	else
	1667	echo -e "$DONE"
[2963]	1668	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1669	fi
	1670	rm -f $MINDI_TMP/syslinux.log
	1671	else
[2963]	1672	LogAll "ERROR: No USB boot support for ia64"
[1684]	1673	MindiExit -1
	1674	fi
	1675	}
	1676
	1677
[747]	1678	MakeMessageFile() {
[2292]	1679
	1680	if [ -x "/bin/lsb_release" ]; then
	1681	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1682	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1683	DESC="Arch Linux"
	1684	if [ -r /var/log/pacman.log ]; then
	1685	# there are no releases but we can get the last system upgrade
	1686	# Output example: Arch Linux [2011-03-03 01:39]
	1687	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1688	fi
[2732]	1689	elif [ -r /etc/issue.net ]; then
[2731]	1690	DESC=`head -1 /etc/issue.net`
[2732]	1691	elif [ -r /etc/issue ]; then
[2731]	1692	DESC=`head -1 /etc/issue`
[2292]	1693	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1694	# For pb >= 0.9.8
[2731]	1695	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4`
[747]	1696	else
[2731]	1697	DESC="Unknown desc"
[747]	1698	fi
[2292]	1699	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1700	if [ _"$MONDO_SHARE" != _"" ]; then
	1701	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1702	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1703	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1704	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1705	elif [ ! "$MINDI_TMP" ] ; then
	1706	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
[1983]	1707	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1708	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1709	fi
[1885]	1710	else
	1711	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1712	fi
[1983]	1713	else
	1714	echo -en "\
[747]	1715	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1716	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1717	fi
[747]	1718	fi
[3173]	1719
	1720	# Also create the other help screens
	1721	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1722	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1723	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1724	}
	1725
	1726
[1983]	1727	MakeBootConfFile() {
[1885]	1728	local options i ooo
[747]	1729	options=""
[1983]	1730	# Type of boot file (elilo or syslinux/isolinux)
	1731	type=$1
	1732	if [ "$type" = "elilo" ]; then
	1733	sep="="
	1734	else
	1735	sep=" "
	1736	fi
[925]	1737
[1983]	1738	# Generic header for conf file
	1739	if [ "$type" != "elilo" ] ; then
[3173]	1740	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[1983]	1741	else
	1742	echo -en "prompt\n"
[925]	1743	fi
[1983]	1744
	1745	# Compute which default option to boot from
[747]	1746	if [ "$CDRECOVERY" = "yes" ] ; then
[1983]	1747	echo -en "default${sep}RESTORE\n"
	1748	# In case it's mondoarchive
[1885]	1749	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1750	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[1983]	1751	echo -en "default${sep}iso\n"
[747]	1752	else
[3053]	1753	echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
[747]	1754	fi
	1755	else
[1983]	1756	echo -en "default${sep}expert\n"
[747]	1757	fi
	1758
[1983]	1759	# Handle timeout
[747]	1760	if [ "$CDRECOVERY" != "yes" ] ; then
[3053]	1761	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[1983]	1762	else
	1763	echo -en "timeout${sep}10000\n"
[747]	1764	fi
	1765	echo -en "\n"
[1983]	1766
[2124]	1767	# prepare which labels will be generated
[747]	1768	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	1769	options="RESTORE expert"
[1885]	1770	else
	1771	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	1772	options="interactive expert compare iso nuke isonuke"
[747]	1773	else
	1774	options="expert"
[925]	1775	fi
[747]	1776	fi
[1983]	1777
	1778	# Generate rest of conf file
[747]	1779	for i in $options ; do
[925]	1780	ooo=$i
[3111]	1781	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	1782	if [ "$type" = "elilo" ]; then
[2564]	1783	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[925]	1784	else
[2073]	1785	ps="/"
	1786	if [ "$type" = "syslinux" ]; then
	1787	ps=""
	1788	fi
[2629]	1789	if [ $KERNEL_IS_XEN = "no" ]; then
	1790	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
	1791	else
	1792	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
	1793	fi
[925]	1794	fi
[1885]	1795	echo -en "$outstr"
[747]	1796	done
[1983]	1797	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1798	if [ "$type" = "elilo" ]; then
	1799	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	1800	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[1983]	1801	else
[2073]	1802	ps="/"
	1803	if [ "$type" = "syslinux" ]; then
	1804	ps=""
	1805	fi
	1806	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	1807	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	1808	fi
	1809	fi
[747]	1810	}
	1811
	1812
	1813	PrepareBootDiskImage_LILO() {
[3248]	1814	local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
[1983]	1815	imagesdir=$MINDI_CACHE
	1816	kernelpath=$1
[747]	1817
	1818	retval=0
[3149]	1819
[3162]	1820	old_pwd=`pwd`
[2690]	1821	[ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
[1885]	1822	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1823	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1824	echo -en "..."
[1885]	1825	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[747]	1826	mkdir -p $mountpoint
[1885]	1827	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[3149]	1828	LogFile "Creating vfat filesystem on $imagefile"
[1983]	1829	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
[3149]	1830	mount -t vfat -o loop $imagefile $mountpoint \|\| LogAll "ERROR: Cannot mount (PBDI)"
	1831
[964]	1832	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1833	mkdir -p $mountpoint/etc
[1983]	1834	liloconf=$mountpoint/elilo.conf
[747]	1835
[1983]	1836	MakeBootConfFile elilo > $liloconf
[747]	1837
[1230]	1838	# Copy it so that CD-ROM menu entry is satisfied
[1983]	1839	mountefi=0
	1840	df -T \| grep /boot/efi \| grep -q vfat
	1841	if [ $? -ne 0 ]; then
	1842	mount /boot/efi
[1230]	1843	if [ $? -ne 0 ]; then
[1983]	1844	echo "You have to mount your EFI partition when using mindi"
	1845	MindiExit -1
[1230]	1846	fi
[1983]	1847	mountefi=1
[1230]	1848	fi
[1983]	1849	el=`find /boot/efi -name elilo.efi`
	1850	cp $el $mountpoint
	1851	cp $liloconf $mountpoint
	1852	if [ $mountefi -eq 1 ]; then
	1853	umount /boot/efi 2>&1 > /dev/null
	1854	fi
[1230]	1855
[2963]	1856	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
[1983]	1857	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
[747]	1858	if [ "$?" -ne "0" ] ; then
[2963]	1859	LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1860	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[2963]	1861	LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[940]	1862	rm -f $MINDI_TMP/mtpt.$$
[2963]	1863	LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1864	retval=$(($retval+1))
	1865	fi
[3173]	1866	MakeMessageFile $mountpoint \| cut -c1-80 > $mountpoint/message.txt
[747]	1867
	1868	mkdir -p $mountpoint/tmp
[3278]	1869	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1870	cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
[747]	1871	fi
	1872
[925]	1873	# copy the kernel across
[1230]	1874	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1875	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1876	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[2092]	1877	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
[1885]	1878	if [ "$?" -ne "0" ] ; then
[2963]	1879	LogFile "INFO: Files at mountpoint ($mountpoint) :"
[925]	1880	du -sk $mountpoint/* >> $LOGFILE
[2963]	1881	LogFile "--- end of list of files ---"
[2691]	1882	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[1998]	1883	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[2712]	1884	cd "$old_pwd"
[747]	1885	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[2963]	1886	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[925]	1887	# losetup /dev/loop0 -d
[1998]	1888	[ "$imagefile" != "" ] && rm -f $imagefile
[2963]	1889	LogIt "ERROR: Sorry, your kernel is too big for your image"
[2773]	1890	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[1885]	1891	return 0
[747]	1892	fi
	1893	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[2963]	1894	LogFile "INFO: Free space left on image = $free_space KB"
	1895	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
[1794]	1896	# make it bootable
[1998]	1897	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[963]	1898	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[1983]	1899	if [ "$KERN_DISK_MADE" ] ; then
[2963]	1900	LogFile "INFO: Not running LILO. It's not that kind of disk."
[747]	1901	fi
[925]	1902
[1983]	1903	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
[747]	1904	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1905	echo -en "..."
[2963]	1906	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
[747]	1907	if [ "$retval" -eq "0" ] ; then
[1885]	1908	echo -en "...$DONE\n"
[747]	1909	if [ "$KERN_DISK_MADE" ] ; then
[2963]	1910	LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
[747]	1911	fi
	1912	else
[1885]	1913	echo -en "...failed\n"
[2963]	1914	LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
[1998]	1915	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	1916	fi
[2963]	1917	[ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
[747]	1918	return $retval
	1919	}
	1920
	1921
[2073]	1922	PrepareBootDiskImage_ISOLINUX() {
[3248]	1923	local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
[1983]	1924	imagesdir=$MINDI_CACHE
	1925	kernelpath=$1
[747]	1926	do_boot_root_thingy=""
	1927	retval=0
[925]	1928
[3162]	1929	old_pwd=`pwd`
[2690]	1930	[ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
[1885]	1931	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1932	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1933	echo -en "..."
[2067]	1934	imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
[747]	1935	mkdir -p $mountpoint
[1885]	1936	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[2963]	1937	LogFile "INFO: Creating vfat filesystem on $imagefile"
[1885]	1938	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
[2067]	1939	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
[1885]	1940	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
	1941
[2625]	1942	# Only move it now to its final destination and use it now
[2067]	1943	mv $imagefile $imagesdir
	1944	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
	1945
[2963]	1946	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "ERROR: Cannot mount (PBDI)"
[925]	1947
	1948	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[3173]	1949	MakeMessageFile $mountpoint \| cut -c1-80 > $mountpoint/message.txt
[2073]	1950	MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
[2963]	1951	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
[1983]	1952	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
[747]	1953	if [ "$?" -ne "0" ] ; then
[2963]	1954	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1955	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[2963]	1956	LogAll " Please unload some of your modules and try again."
[940]	1957	rm -f $MINDI_TMP/mtpt.$$
[2963]	1958	LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
	1959	LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[747]	1960	retval=$(($retval+1))
	1961	fi
	1962
	1963	mkdir -p $mountpoint/tmp
[3278]	1964	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1965	cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
[1983]	1966	fi
[747]	1967
[925]	1968	# copy the kernel across
[1230]	1969	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1970	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1971	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[2629]	1972
	1973	retval=0
[2681]	1974	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
	1975	retval=$?
	1976	if [ $KERNEL_IS_XEN = "yes" ]; then
[2629]	1977	cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
	1978	let retval+=$?
	1979	fi
	1980
	1981	if [ "$retval" -ne "0" ] ; then
[2963]	1982	LogFile "INFO: Files at mountpoint ($mountpoint) :"
[747]	1983	du -sk $mountpoint/* >> $LOGFILE
[2963]	1984	LogFile "--- end of list of files ---"
[2691]	1985	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
[1998]	1986	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[2712]	1987	cd "$old_pwd"
[747]	1988	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[3149]	1989	rmdir $mountpoint \|\| LogAll "ERROR: Cannot rmdir (PBDI)"
[747]	1990
[2963]	1991	LogIt "ERROR: Sorry, your kernel is too big for your image"
[2773]	1992	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
[747]	1993	fi
	1994	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[2963]	1995	LogFile "INFO: Free space left on image = $free_space KB"
	1996	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
[925]	1997
	1998	# make it bootable
[1998]	1999	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[747]	2000	mkdir -p $mountpoint/etc
[963]	2001	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[747]	2002	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	2003	echo -en "..."
[3149]	2004	rmdir $mountpoint \|\| LogAll "ERROR: Cannot rmdir (PBDI)"
[747]	2005
	2006	if [ "$retval" -eq "0" ] ; then
[1885]	2007	echo -en "...$DONE\n"
[747]	2008	if [ "$KERN_DISK_MADE" ] ; then
[1998]	2009	[ "$imagefile" != "" ] && rm -f $imagefile
[3149]	2010	LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
[747]	2011	fi
	2012	else
[1885]	2013	echo -en "...failed\n"
[3149]	2014	LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
[1998]	2015	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	2016	fi
[3149]	2017	[ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
[747]	2018	return $retval
	2019	}
	2020
	2021
[2006]	2022	ParseModprobeForIncludes() {
	2023	local MODPROBE_CONF mpincfile includes include
	2024
	2025	MODPROBE_CONF=/etc/modprobe.conf
	2026	mpincfile=$1
	2027	touch $mpincfile
	2028	if [ -a $MODPROBE_CONF ]; then
[2431]	2029	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2030	if [ -n "$includes" ]; then
	2031	for include in $includes
	2032	do
	2033	if [ -a "$include" ]; then
	2034	echo $include >> $mpincfile
	2035	fi
	2036	done
	2037	fi
	2038	fi
	2039	}
	2040
	2041
[747]	2042	PrepareDataDiskImages() {
[2006]	2043	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
[747]	2044
[1983]	2045	imagesdir=$MINDI_CACHE
[1902]	2046	rm -f $imagesdir/mindi.iso
[940]	2047	needlist=$MINDI_TMP/what-we-need.txt
	2048	bigdir=$MINDI_TMP/bigdir
[747]	2049	mkdir -p $bigdir/usr/bin
[1983]	2050	mkdir -p $bigdir/usr/sbin
[2006]	2051	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2052
[3149]	2053	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2054	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2055	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2056	fi
[1885]	2057	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2058	ParseModprobeForIncludes $includefile
[2019]	2059	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2060	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2061	res=$?
[2006]	2062	rm -f $includefile
[3231]	2063	ListKernelModulePaths >> $needlist
[747]	2064	if [ "$res" -ne "0" ] ; then
[1902]	2065	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2066	fi
	2067	mkdir -p $bigdir/tmp
[1885]	2068	if [ _"$MONDO_SHARE" != _"" ]; then
[3270]	2069	# BCO: no reason to have the cfg file stored twice
[3278]	2070	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2071	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2072	fi
[3281]	2073
	2074	# Needs to be done after the MRCFG creation
	2075	FindAndAddUserKeyboardMappingFile
	2076
[3166]	2077	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2078	DropOptimizedLibraries $needlist $bigdir
	2079	echo -en "Assembling dependency files"
	2080
[3149]	2081	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
	2082
[925]	2083	# also copy io.sys and msdos.sys, if we can find them
[747]	2084	for i in `mount \| cut -d' ' -f3` ; do
[925]	2085	for j in io.sys msdos.sys ; do
[963]	2086	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2087	done
[747]	2088	done
	2089
[925]	2090	# master boot record, too
[940]	2091	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[747]	2092	if [ "$i" ] ; then
[3149]	2093	LogAll "INFO: Backing up $i's MBR"
[925]	2094	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2095	sleep 1
	2096	sync
	2097	j=$i
	2098	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2099	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2100	mkdir -p $bigdir/dev
[2089]	2101	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2102	fi
	2103
	2104	old_pwd=`pwd`
[2712]	2105	cd "$bigdir"
[747]	2106
[1983]	2107	# Get terminfo content
	2108	ti="usr/share/terminfo/l"
	2109	if [ -d /$ti ]; then
	2110	mkdir -p $ti
[3149]	2111	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2112	fi
[1764]	2113	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[747]	2114	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
[1335]	2115	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[747]	2116	fi
[2290]	2117	if [ -d "/lib/dev-state" ]; then
[3231]	2118	cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2119	fi
[2712]	2120	cd "$old_pwd"
[747]	2121	echo -e "$DONE"
	2122	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	2123	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2124	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2125	mkdir -p $bigdir/tmp
[2092]	2126	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2127	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2128	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2129	fi
[2032]	2130	if [ $LVM != "false" ]; then
	2131	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
	2132	if [ "$?" -ne "0" ]; then
	2133	LVM="false"
	2134	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2135	else
[2963]	2136	LogFile "Your i-want-my-lvm file content is:"
	2137	LogFile "-----------------------------------"
[2552]	2138	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2139	LogFile "-----------------------------------"
[2032]	2140	fi
	2141	fi
[2963]	2142	LogFile "Your mountlist.txt file content is:"
	2143	LogFile "-----------------------------------"
[1902]	2144	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2145	LogFile "-----------------------------------"
[2432]	2146
[2092]	2147	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2148	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2149	if [ _"$MONDO_SHARE" != _"" ]; then
	2150	for q in filelist.full.gz biggielist.txt ; do
	2151	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2152	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2153	done
	2154	fi
	2155
	2156	echo -en "Tarring and zipping the data content..."
	2157	size_of_all_tools=`du -sk $bigdir \| cut -f1`
[3149]	2158	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $imagesdir/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2159	LogFile "Size of the data content"
	2160	LogFile "------------------------"
[1902]	2161	du -sk $imagesdir/*gz >> $LOGFILE
[3149]	2162	LogFile "------------------------"
[1902]	2163	echo -e "$DONE"
	2164
[747]	2165	FRIENDLY_OUTSTRING="Boot and data disk images were created."
[1902]	2166	rm -rf $bigdir
[747]	2167	rm -f $needlist
	2168	}
	2169
	2170
	2171	Prompt() {
	2172	echo -en "$1"
	2173	read line
	2174	}
	2175
	2176
	2177	ReadLine() {
	2178	local i incoming
	2179	read incoming
	2180	i=0
	2181	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2182	i=$(($i+1))
	2183	read incoming
[747]	2184	done
	2185	echo "$incoming"
	2186	}
	2187
	2188
	2189	SizeOfPartition() {
	2190	local devpath drive res stub
	2191	device=$1
[2917]	2192	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2193	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2194	fi
[747]	2195	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2196	res=`SizeOfRaidPartition $device`
	2197	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2198	echo "$res"
	2199	return 0
[747]	2200	fi
[925]	2201	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2202	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2203	# end patch
[2448]	2204	# take only the first in case of multiple mount (cifs, nfs, ...)
	2205	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2206	[ "$res" = "" ] && res="-1"
	2207	echo $res
	2208	return 0
	2209	}
	2210
	2211
	2212	SizeOfRaidPartition() {
	2213	local real_dev smallest_size silly tmp
	2214
	2215	silly=999999999
	2216	smallest_size=$silly
	2217
	2218	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2219	tmp=`SizeOfPartition $real_dev`
	2220	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2221	done
	2222
	2223	if [ "$smallest_size" = "$silly" ] ; then
[925]	2224	echo "-1"
	2225	return 1
[747]	2226	else
[925]	2227	echo "$smallest_size"
	2228	return 0
[747]	2229	fi
	2230	}
	2231
	2232
	2233	StripExecutable()
	2234	{
	2235	local tmpfile
[925]	2236
[940]	2237	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2238	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2239	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2240	strip $tmpfile 2> /dev/null
	2241	if [ "$?" -eq "0" ] ; then
[963]	2242	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2243	LogFile "INFO: Stripped binary $2"
[747]	2244	fi
	2245	rm -f $tmpfile
	2246	}
	2247
[2292]	2248	KernelVer() {
	2249	local fkern_ver fname
[747]	2250
[2292]	2251	fname=$1
	2252	file $fname \| grep -q gzip
	2253	if [ "$?" -eq "0" ] ; then
	2254	# Used by ia64
[3248]	2255	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2256	else
[3248]	2257	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2258	fi
	2259	echo "$fkern_ver"
	2260	}
	2261
	2262
[2880]	2263	# WARNING: This function should just echo the final result !!!
	2264	#
[747]	2265	TryToFindKernelPath() {
[2880]	2266	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2267
[2292]	2268	we_want_version=$KERVERRUN
[747]	2269	possible_kernels=""
	2270	duff_kernels=""
[2880]	2271	output=""
[747]	2272
	2273	if [ "$ARCH" = "ia64" ] ; then
	2274	root="/boot/efi/efi"
	2275	else
	2276	root="/"
	2277	fi
[2681]	2278	# See if we're booted from a Xen kernel
[2889]	2279	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2280	if [ -f /proc/xen/capabilities ]; then
[2681]	2281	# It's a Xen kernel
	2282	KERNEL_IS_XEN="yes"
[2963]	2283	LogFile "INFO: It's a Xen kernel..."
[2681]	2284	fi
	2285
[3122]	2286	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2287	[ ! -e "$fname" ] && continue
[747]	2288	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2289	fkern_ver=`KernelVer $fname`
[747]	2290	[ "$fkern_ver" = "" ] && continue
	2291	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2292	[ -f "$fname" ] \|\| continue
	2293	[ -h "$fname" ] && continue
	2294	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2295	file $fname \| grep -q gzip
	2296	if [ "$?" -eq "0" ] ; then
	2297	# Used by ia64
	2298	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2299	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2300	duff_kernels="$fname $duff_kernels"
	2301	else
[747]	2302	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2303	possible_kernels="$fname $possible_kernels"
[925]	2304	fi
[747]	2305	else
[925]	2306	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2307	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2308	duff_kernels="$fname $duff_kernels"
	2309	else
[747]	2310	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2311	possible_kernels="$fname $possible_kernels"
[925]	2312	fi
[747]	2313	fi
	2314	done
	2315	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3182]	2316	possible_kernels=`find /boot/vmlinuz-[23].* \| tail -n1`
[747]	2317	fi
	2318	if [ ! "$possible_kernels" ] ; then
[3149]	2319	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2320	possible_kernels="$duff_kernels"
	2321	if [ ! "$possible_kernels" ] ; then
[3149]	2322	LogAll "INFO: Sorry, no duff kernels either"
[747]	2323	else
[3149]	2324	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2325	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2326	fi
	2327	fi
[2681]	2328	if [ $KERNEL_IS_XEN = "yes" ]; then
	2329	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2330	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2331	fi
[2829]	2332	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2333	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2334	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2335	LogAll "Could not find your kernel."
[925]	2336	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2337	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2338	output=/boot/vmlinuz
[747]	2339	else
[925]	2340	output=""
	2341	fi
[747]	2342	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2343	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2344	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2345	output="$kp"
[747]	2346	else
	2347	for i in $possible_kernels ; do
[2880]	2348	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2349	LogAll "INFO: OK, I used my initiative and found that "
	2350	LogAll "INFO: $i is probably your kernel. "
[925]	2351	output="$i"
[2858]	2352	break
[925]	2353	fi
[747]	2354	done
[2858]	2355	if [ ! -n "$output" ]; then
[2880]	2356	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2357	output=/boot/vmlinuz
[2963]	2358	LogFile "INFO: Schlomo, this one's for you."
[2681]	2359	else
[2963]	2360	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
	2361	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2362	LogFile "INFO: $possible_kernels"
[2880]	2363	output=""
[2681]	2364	fi
	2365	fi
	2366	fi
	2367	if [ $KERNEL_IS_XEN = "yes" ]; then
	2368	if [ "$noof_xenkernels" -eq "0" ]; then
	2369	xenkernelpath=""
	2370	elif [ "$noof_xenkernels" -eq "1" ]; then
	2371	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2372	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2373	else
[2681]	2374	for i in $possible_xenkernels ; do
[2880]	2375	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2376	LogFile "INFO: OK, I used my initiative and found that "
	2377	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2378	xenkernelpath="$i"
[2858]	2379	break
[2681]	2380	fi
	2381	done
[2858]	2382	if [ ! -n "$xenkernelpath" ]; then
[2681]	2383	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2384	if [ ! -n "$new_possible_xenkernels" ]; then
	2385	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2386	LogFile "INFO: Using $xenkernelpath"
[2681]	2387	else
[2963]	2388	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2389	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2390	LogFile "INFO: $possible_xenkernels"
[2880]	2391	output=""
[2681]	2392	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2393	LogFile "INFO: Using $xenkernelpath"
[2681]	2394	fi
	2395	fi
[925]	2396	fi
[2681]	2397	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2398	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2399	fi
[747]	2400	fi
[2880]	2401	LogAll "TryToFindKernelPath found $output"
[2681]	2402	echo "$output"
[747]	2403	}
	2404
	2405
	2406	TurnTgzIntoRdz() {
[3248]	2407	local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
[925]	2408
[747]	2409	tgz_dir_fname=$1
	2410	rdz_fname=$2
[1983]	2411	kernelsize=$3
[1885]	2412	maxsize=$(($BOOT_SIZE-$kernelsize))
[747]	2413	maxsize=$(($maxsize*2)); # to allow for compression of 50%
[940]	2414	tempfile=$MINDI_TMP/temp.rd
[747]	2415	res=0
	2416	echo -en "..."
	2417	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	2418	echo -en "..."
[2963]	2419	LogFile "INFO: Creating ext2 filesystem on $tempfile"
[1764]	2420	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2421	echo -en "..."
	2422	mkdir -p $mountpoint
	2423	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2424	echo -en "..."
	2425	old_pwd=`pwd`
[2712]	2426	cd "$mountpoint"
[2034]	2427
[3248]	2428	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2429	for d in bin sbin lib lib64; do
	2430	if [ -h "/$d" ]; then
	2431	thelink=`readlink /$d`
	2432	mkdir -p $mountpoint/$thelink \|\| LogIt "ERROR: Unable to create $thelink in $mountpoint."
	2433	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
	2434	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
	2435	rmdir $mountpoint/$d
	2436	fi
	2437	if [ ! -h $mountpoint/$d ]; then
	2438	rm -f $mountpoint/$d 2> /dev/null
	2439	(cd $mountpoint ; ln -s $thelink $d) \|\| LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
	2440	fi
	2441	fi
	2442	done
	2443	LogFile "INFO: what is now in $mountpoint"
	2444	ls -alR $mountpoint >> $LOGFILE
[3172]	2445
[2963]	2446	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
	2447	for f in $tgz_dir_fname/*; do
	2448	if [ ! -r $f ]; then
	2449	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2450	else
	2451	cp -Rdf $f . 2>&1 >> $LOGFILE
	2452	fi
	2453	done
[3231]	2454	(cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2455	ln -sf usr/sbin/init linuxrc
[1914]	2456
[747]	2457	cd dev \|\| Die "Can't cd to dev"
	2458	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
	2459	rm -f dev-entries.tgz
	2460	cd ..
	2461
	2462	for w in insmod.static insmod.static.old ; do
[925]	2463	s=`which $w 2> /dev/null`
	2464	if [ -e "$s" ] ; then
[2156]	2465	tar cf - -C / $s 2> /dev/null \| tar xf -
[925]	2466	fi
[747]	2467	done
	2468
	2469	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2470
[2438]	2471	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3241]	2472	mkdir $mountpoint/.ssh $mountpoint/tmp
[3204]	2473	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
[3241]	2474	cat > $mountpoint/tmp/myssh << EOF
[2438]	2475	ssh -o StrictHostKeyChecking=no $*
	2476	EOF
	2477	chmod 755 $mountpoint/tmp/myssh
	2478
[2039]	2479	# Copy of files mandatory for ld.so
[3204]	2480	cp -a /etc/ld.so.c* $mountpoint/etc
[2039]	2481
[2951]	2482	# Handle the case where busybox and mount are dynamically linked
[3231]	2483	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2484	if [ $? -eq 0 ]; then
	2485	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
	2486	rm -f bin/mount
	2487	fi
	2488
[3277]	2489	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
[3081]	2490	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[3277]	2491	for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf \| grep -vE " #.\|^#" \| sort -u` ; do
	2492	if [ -d $f ]; then
	2493	for g in `find $f`; do
	2494	echo $g >> $MINDI_TMP/minimal.lis
	2495	LocateDeps $g >> $MINDI_TMP/minimal2.lis
	2496	done
	2497	else
	2498	if [ -r $f ]; then
	2499	echo $f >> $MINDI_TMP/minimal.lis
	2500	LocateDeps $f >> $MINDI_TMP/minimal2.lis
	2501	fi
[3081]	2502	fi
[2951]	2503	done
[3081]	2504	for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
[3231]	2505	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
[2951]	2506	done
	2507	# Initial / are trucated by tar
[3014]	2508	finallist=""
[3204]	2509	# Remove directories from the list, as tar/cp will create them anyway
[3014]	2510	# and it may hurt if /lib is in it as on Debian/Ubuntu
[3166]	2511	# recent bash says that -d is true for a link to a dir !
[3014]	2512	for f in `sort -u $MINDI_TMP/minimal.lis`; do
[3197]	2513	if [ -e $f -a ! -d $f ] \|\| [ -h $f ]; then
[3014]	2514	finallist="$finallist $f"
	2515	fi
	2516	done
[3201]	2517	#tar cf - $finallist 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
[3204]	2518	echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
	2519	cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log \|\| LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
[3000]	2520
	2521	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3039]	2522	ln -sf /bin/bash bin/sh
	2523	LogIt "INFO: Using bash as default shell"
[3081]	2524	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
[2951]	2525
	2526	# Avoids an issue on some distro (RHEL5)
[2164]	2527	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
	2528
[1914]	2529	mkdir -p $mountpoint/tmp
[1724]	2530	# Management of udev (which includes modprobe in rules)
[1759]	2531	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2532	if [ $? -eq 0 ]; then
[1914]	2533	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[2963]	2534	LogIt "INFO: udev device manager found"
	2535	tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
[3204]	2536	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
	2537	rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2538	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2539	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[2963]	2540	tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
[2894]	2541	fi
[2895]	2542	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[2963]	2543	tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
[2895]	2544	fi
	2545	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[2963]	2546	tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
[2895]	2547	fi
[3261]	2548	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
	2549	tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
	2550	fi
[3172]	2551	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ]; then
[2964]	2552	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
[1781]	2553	lis=""
	2554	# Get only the files which exist in that list
[1815]	2555	# and potentially their symlink structure
[1781]	2556	for i in $lis2; do
[1815]	2557	if [ -h $i ]; then
	2558	j=$i
	2559	while [ -h $j ]; do
	2560	lis="$lis $j"
[3204]	2561	j=`readlink -f $j`
[1815]	2562	done
	2563	lis="$lis $j"
	2564	elif [ -f $i ]; then
[1781]	2565	lis="$lis $i"
	2566	fi
	2567	done
	2568	# And their deps
[1759]	2569	LocateDeps $lis > $MINDI_TMP/udev.lis
	2570	for i in $lis; do
	2571	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2572	j=`echo $i \| cut -c2-`
[1998]	2573	[ "$j" != "" ] && rm -f $j
[1759]	2574	fi
[3204]	2575	echo "$i" >> $MINDI_TMP/udev.lis
[1759]	2576	done
[3257]	2577	finallist=""
	2578	# Remove directories from the list, as tar/cp will create them anyway
	2579	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2580	# recent bash says that -d is true for a link to a dir !
	2581	for f in `sort -u $MINDI_TMP/udev.lis`; do
	2582	if [ -e $f -a ! -d $f ] \|\| [ -h $f ]; then
	2583	finallist="$finallist $f"
	2584	fi
	2585	done
[3201]	2586	#tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
[3257]	2587	echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
	2588	cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log \|\| LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
[1721]	2589	rm -f $MINDI_TMP/udev.lis
[1720]	2590	else
[2965]	2591	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2592	LogAll " mindi will use static devices which may cause problems"
[1914]	2593	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2594	fi
[1716]	2595	fi
[1786]	2596
[2882]	2597	# Management of potential HW info (ProLiant only at the moment)
[1880]	2598	rm -rf $MINDI_CACHE/bkphw
	2599	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2600	if [ -d $MINDI_CACHE/bkphw ]; then
[2963]	2601	LogIt "INFO: Hardware Information found and saved ..."
[1880]	2602	cp -rp $MINDI_CACHE/bkphw .
	2603	if [ -f $MINDI_CACHE/tools.files ]; then
	2604	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2605	LocateDeps $lis > $MINDI_TMP/tools.lis
[2963]	2606	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
[1863]	2607	fi
[1880]	2608	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
	2609	mv -f $MINDI_CACHE/mindi-rsthw .
[1761]	2610	chmod 755 ./mindi-rsthw
	2611	fi
[1880]	2612	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2613	fi
	2614
[2183]	2615	# Management of perl scripts delivered needed at restore time
[3239]	2616	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
[2963]	2617	tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
[2183]	2618
[1885]	2619	for w in cdrom groovy-stuff ; do
[747]	2620	mkdir -p mnt/$w
	2621	done
	2622
[2963]	2623	tar cf - -C / /dev/fd0[1,2][4,7,8] 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
[1721]	2624
[747]	2625	echo -en "..."
[3231]	2626	cd /
[1885]	2627
	2628	needed_modules=""
[1993]	2629	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2630
[3270]	2631	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2632	# For PXE boot
	2633	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2634	fi
[1727]	2635	for i in $DENY_MODS; do
[2963]	2636	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2637	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2638	done
	2639
[3253]	2640	if [ "${kernelname}" != "" ]; then
	2641	needed_modules_path=lib/modules/${kernelname}
[3257]	2642	mkgmopt="-k ${kernelname}"
[3253]	2643	else
	2644	needed_modules_path=lib/modules/$KERVERRUN
	2645	mkgmopt="-k $KERVERRUN"
	2646	fi
[1914]	2647
[3253]	2648	[ -e "$needed_modules_path" ] \|\| LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
	2649	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2650
[3257]	2651	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3253]	2652	cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log \|\| LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
	2653
	2654	# Uncompress modules if not using udev and native modprobe
	2655	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2656	for i in $needed_modules; do
	2657	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[1727]	2658	gunzip -f $mountpoint/$i
[1815]	2659	fi
[3253]	2660	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
	2661	bunzip2 -f $mountpoint/$i
	2662	fi
	2663	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
	2664	unxz -f $mountpoint/$i
	2665	fi
	2666	LogFile "INFO: Uncompressing $i"
	2667	done
	2668	fi
[1815]	2669
[2964]	2670	# Also copy modules.* in case of udev so that normal modprobe works
	2671	tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log \| (cd "$mountpoint" ; tar xf -) \|\| LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
[1815]	2672
[2680]	2673	# Copy FW in case some drivers needs it
[3163]	2674	for d in "/lib" "/usr/lib"; do
[3201]	2675	if [ -d "$d/firmware" -a ! -h $d ]; then
[3166]	2676	cp -a "$d/firmware" "$mountpoint/$d"
[3163]	2677	fi
	2678	done
[2680]	2679
[3163]	2680	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2681	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2682	if [ -d "$d/multipath" -a ! -h $d ]; then
[3166]	2683	cp -a "$d/multipath" "$mountpoint/$d"
[3163]	2684	fi
	2685	done
	2686
[3326]	2687	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
	2688	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2689
[2913]	2690	# Copy an additional ProLiant tool for OBDR support
	2691	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2692	found=0
[2913]	2693	if [ -x /usr/bin/hpsa_obdr_mode ]; then
	2694	mkdir -p $mountpoint/usr/bin
	2695	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
[3117]	2696	LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
	2697	found=1
	2698	fi
	2699	if [ -x /usr/bin/sg_wr_mode ]; then
	2700	mkdir -p $mountpoint/usr/bin
[3135]	2701	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2702	LocateDeps $lis > $MINDI_TMP/obdr.lis
	2703	(cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
	2704	LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2705	found=1
	2706	fi
	2707	if [ $found -eq 0 ]; then
	2708	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2709	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2710	fi
	2711	fi
	2712
[1885]	2713	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
[2963]	2714	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2715	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[747]	2716	rm -f $mountpoint/sbin/devfsd
	2717	fi
[2712]	2718	cd "$old_pwd"
[747]	2719	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
[1885]	2720	if [ _"$MONDO_SHARE" != _"" ]; then
[3278]	2721	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
	2722	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
[2092]	2723	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2724	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2725	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2726	fi
[3310]	2727
	2728	# Create module list to load at restore time
	2729	rm -f $mountpoint/tmp/modules
	2730	for m in $CDROM_MODS; do
	2731	echo $m >> $mountpoint/tmp/modules
	2732	done
	2733
[747]	2734	mkdir -p $mountpoint/proc
[2963]	2735	LogFile "---------------------------"
	2736	LogFile "Content of initial ramdisk:"
	2737	LogFile "---------------------------"
[2712]	2738	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
[2963]	2739	LogFile "---------------------------"
[2438]	2740
[1230]	2741	# Determine what filesystem to use for initrd image
[2963]	2742	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2743	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2744	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2745	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2746	# say what will be used
[2963]	2747	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2748	# kernel expects linuxrc in ext2 filesystem
[3231]	2749	( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
[1230]	2750	# unmount loop filesystem and create image file using the standard approach
	2751	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[1764]	2752	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
[3008]	2753	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2754	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2755	else
	2756	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2757	fi
[2564]	2758	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2759	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2760	rm -f ${rdz_fname}.tmp
[1230]	2761	# log that we are done
[2995]	2762	LogFile " ...done."
[2390]	2763	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	2764	# say what will be used
[2963]	2765	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	2766	# make sure that cpio is there
	2767	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2768	# go into filesystem
[2712]	2769	cd "$mountpoint"
[1230]	2770	# kernel expects init in cpio filesystem
[3324]	2771	ln -sf usr/sbin/init init
[1230]	2772	# create cpio image file and unmount loop filesystem
[1929]	2773	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
[2712]	2774	cd "$old_pwd"
[1230]	2775	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2776	# log that we are done
[2995]	2777	LogFile " ...done."
[2390]	2778	else
[1230]	2779	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	2780	fi
	2781
[747]	2782	if [ "$res" -eq "0" ] ; then
	2783	echo -en "..."
	2784	else
	2785	echo -en "\rMade an rdz WITH ERRORS. \n"
	2786	fi
	2787	return 0
	2788	}
	2789
	2790
	2791	##############################################################################
[1021]	2792	#----------------------------------- Main -----------------------------------#
[747]	2793	##############################################################################
	2794
[1885]	2795	# Now we can create what we need
	2796	mkdir -p $MINDI_TMP
[747]	2797
[1885]	2798	# Purge from potential old run
	2799	if [ _"$MINDI_CACHE" = _"" ]; then
	2800	Die "MINDI_CACHE undefined"
	2801	fi
	2802
[2995]	2803	# --nolog needs to be first, and is used in analyze-my-lvm
	2804	if [ "$1" = "--nolog" ] ; then
	2805	shift
	2806	LOGFILE=/dev/stderr
	2807	else
	2808	> $LOGFILE
	2809	fi
[1885]	2810	if [ "$1" = "--printvar" ] ; then
	2811	shift
	2812	if [ _"$1" != _"" ] ; then
	2813	set \| grep -Ew "^$1" \| cut -d= -f2
	2814	fi
[2183]	2815	exit 0
[1885]	2816	fi
	2817
[2963]	2818	LogFile "mindi v$MINDI_VERSION"
	2819	LogFile "$ARCH architecture detected"
	2820	LogFile "mindi called with the following arguments:"
[2978]	2821	echo "$@">> $LOGFILE
[2963]	2822	LogFile "Start date : `date`"
	2823	LogFile "-----------------------------"
[747]	2824
[3149]	2825	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
[747]	2826
[1010]	2827	# Log some capital variables
	2828	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	2829	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	2830	LogFile "MONDO_SHARE = $MONDO_SHARE"
	2831	LogFile "MINDI_LIB = $MINDI_LIB"
	2832	LogFile "MINDI_SBIN = $MINDI_SBIN"
	2833	LogFile "MINDI_CONF = $MINDI_CONF"
[1885]	2834	if [ -f $MINDI_CONFIG ]; then
[2963]	2835	LogFile "-----------------------------"
	2836	LogFile " Mindi configuration file "
	2837	LogFile "-----------------------------"
[1885]	2838	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	2839	LogFile "-----------------------------"
[1885]	2840	fi
[2995]	2841	LogFile "In Mindi"
	2842	LogFile "--------"
	2843	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	2844	LogFile "BOOT_SIZE = $BOOT_SIZE"
	2845	LogFile "--------"
[1010]	2846
[747]	2847	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	2848
	2849	# Sanity checks
	2850	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	2851	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	2852	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	2853	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	2854	if which awk &> /dev/null ; then
	2855	if ! which gawk &> /dev/null ; then
[2963]	2856	LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	2857	fi
	2858	fi
	2859	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	2860	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	2861
[3005]	2862	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	2863
	2864	# Update the PATH variable if incomplete
	2865	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	2866	PATH=$PATH:/sbin:/usr/sbin
	2867	export PATH
[2963]	2868	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	2869	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	2870	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	2871	fi
	2872
[1737]	2873	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[1010]	2874	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
	2875	fi
	2876
[3149]	2877	### TODO
[747]	2878	### Fix as it's not mandatory on ia64
	2879	if [ "$ARCH" = "ia64" ] ; then
[1010]	2880	if which elilo &> /dev/null ; then
	2881	LILO_EXE=elilo
	2882	else
[2024]	2883	LILO_EXE=`which false 2> /dev/null`
[1010]	2884	fi
[747]	2885	else
	2886	FindIsolinuxBinary
	2887	fi
	2888	trap "Aborted" SIGTERM
	2889	DONE="\r\t\t\t\t\t\t\t\tDone. "
	2890	kernelpath=""
[1010]	2891	MONDO_ROOT=/var/cache/mondo
[747]	2892	mkdir -p $MONDO_ROOT
	2893
	2894	if [ -d "/proc/lvm" ]; then
	2895	# LVM v1
	2896	LVMCMD=""
	2897	LVM="v1"
	2898	elif [ -d "/dev/mapper" ]; then
	2899	# LVM v2
	2900	LVMCMD="lvm"
	2901	LVM="v2"
	2902	else
	2903	LVM="false"
	2904	fi
[3149]	2905
	2906	if [ -e "/proc/cmdline" ]; then
	2907	CMDLINE="/proc/cmdline"
	2908	elif [ -e "/tmp/cmdline" ]; then
	2909	CMDLINE="/tmp/cmdline"
	2910	else
	2911	CMDLINE="/dev/null"
	2912	fi
	2913
[2963]	2914	LogFile "INFO: LVM set to $LVM"
	2915	LogFile "----------"
	2916	LogFile "mount result:"
	2917	LogFile "-------------"
[1230]	2918	mount >> $LOGFILE
[1315]	2919	if [ -e /etc/raidtab ]; then
[2963]	2920	LogFile "-------------"
	2921	LogFile "/etc/raidtab content:"
	2922	LogFile "-------------"
[1315]	2923	cat /etc/raidtab >> $LOGFILE
[3077]	2924	else
[3073]	2925	LogFile "No file /etc/raidtab"
[1315]	2926	fi
[2981]	2927	if [ -e /etc/mdadm.conf ]; then
	2928	LogFile "-------------"
	2929	LogFile "/etc/mdadm.conf content:"
	2930	LogFile "-------------"
	2931	cat /etc/mdadm.conf >> $LOGFILE
[3077]	2932	else
[3149]	2933	LogFile "-------------"
[3073]	2934	LogFile "No file /etc/mdadm.conf"
[2981]	2935	fi
[2963]	2936	LogFile "-------------"
[3149]	2937	LogFile "cat $CMDLINE"
[2963]	2938	LogFile "-------------"
[3149]	2939	cat $CMDLINE >> $LOGFILE
[2963]	2940	LogFile "-------------"
	2941	LogFile "cat /proc/swaps:"
	2942	LogFile "-------------"
[2014]	2943	cat /proc/swaps >> $LOGFILE
[2963]	2944	LogFile "-------------"
[3073]	2945	if [ -e /proc/mdstat ]; then
	2946	LogFile "cat /proc/mdstat:"
	2947	LogFile "-------------"
	2948	cat /proc/mdstat >> $LOGFILE
[3077]	2949	else
[3073]	2950	LogFile "No pseudo file /proc/mdstat"
	2951	fi
[2981]	2952	LogFile "-------------"
[2963]	2953	LogFile "cat /proc/partitions:"
	2954	LogFile "-------------"
[2015]	2955	cat /proc/partitions >> $LOGFILE
[2963]	2956	LogFile "-------------"
	2957	LogFile "cat /proc/filesystems:"
	2958	LogFile "-------------"
[2015]	2959	cat /proc/filesystems >> $LOGFILE
[2963]	2960	LogFile "-------------"
	2961	LogFile "lsmod result:"
	2962	LogFile "-------------"
[1021]	2963	lsmod >> $LOGFILE
[2431]	2964	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	2965	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	2966	LogFile "-------------"
	2967	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	2968	LogFile "-------------"
	2969	LogFile "VMWare modules"
	2970	LogFile "-------------"
[1531]	2971	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	2972	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	2973	fi
[3149]	2974	LogFile "-------------"
[2963]	2975	LogFile "FORCE_MODS:"
	2976	LogFile "-------------"
[3065]	2977	LogFile "$FORCE_MODS"
[2963]	2978	LogFile "-------------"
	2979	LogFile "DENY_MODS:"
	2980	LogFile "-------------"
[3065]	2981	LogFile "$DENY_MODS"
[2963]	2982	LogFile "-------------"
	2983	LogFile "df result:"
	2984	LogFile "----------"
[3117]	2985	df -aT >> $LOGFILE
[2963]	2986	LogFile "-------------"
[3117]	2987	LogFile "df -i result:"
	2988	LogFile "----------"
	2989	df -i >> $LOGFILE
	2990	LogFile "-------------"
	2991	if [ -r /boot/grub/menu.lst ]; then
	2992	LogFile "-------------"
	2993	LogFile "INFO: /boot/grub/menu.lst content"
	2994	LogFile "-------------"
	2995	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	2996	LogFile "-------------"
[3117]	2997	fi
[3123]	2998	if [ -r /boot/grub/grub.conf ]; then
[3117]	2999	LogFile "-------------"
[3123]	3000	LogFile "INFO: /boot/grub/grub.conf content"
	3001	LogFile "-------------"
	3002	cat /boot/grub/grub.conf >> $LOGFILE
	3003	LogFile "-------------"
	3004	fi
	3005	if [ -r /boot/grub/grub.cfg ]; then
	3006	LogFile "-------------"
	3007	LogFile "INFO: /boot/grub/grub.cfg content"
	3008	LogFile "-------------"
	3009	cat /boot/grub/grub.cfg >> $LOGFILE
	3010	LogFile "-------------"
	3011	fi
	3012	if [ -r /boot/grub/device.map ]; then
	3013	LogFile "-------------"
[3117]	3014	LogFile "INFO: /boot/grub/device.map content"
	3015	LogFile "-------------"
[3123]	3016	cat /boot/grub/device.map >> $LOGFILE
	3017	LogFile "-------------"
[3117]	3018	fi
	3019	if [ -r /etc/lilo.conf ]; then
	3020	LogFile "-------------"
	3021	LogFile "INFO: /etc/lilo.conf content"
	3022	LogFile "-------------"
	3023	cat /etc/lilo.conf >> $LOGFILE
	3024	fi
[3146]	3025	LogFile "Full fdisk info"
	3026	LogFile "---------------"
	3027	$FDISK -l >> $LOGFILE
	3028	LogFile "----------------"
[747]	3029
[1723]	3030	# Compute libata version
[2649]	3031	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3032	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3033	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3034	if [ "$laver" = "2" ]; then
[1726]	3035	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3036	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3037	LogFile "-------------"
[1726]	3038	fi
[1723]	3039	fi
	3040
[2963]	3041	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3042	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3043	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3044	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3045	LogFile "WARNING: You have two options:"
	3046	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3047	LogFile "WARNING: - Disable the scanner during the backup"
	3048	fi
	3049
[2457]	3050	# Check for ISO_CMD command
	3051	if [ ! -x $ISO_CMD ]; then
[2963]	3052	LogFile "NOTE: No CD image (ISO file) utility found"
[2457]	3053	fi
	3054
[747]	3055	FLOPPY_WAS_MOUNTED=""
	3056	for mtpt in /media/floppy /mnt/floppy /floppy ; do
	3057	if mount \| grep -w $mtpt &> /dev/null ; then
	3058	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
	3059	umount $mtpt
	3060	fi
	3061	done
	3062
[1684]	3063	#
	3064	# If we have a USB device we need to store info
	3065	# and remove it from the parameters line
	3066	#
[747]	3067	if [ "$#" -ne "0" ] ; then
[1684]	3068	if [ "$1" = "--usb" ] ; then
	3069	shift
	3070	USBDEVICE=$1
	3071	if [ _"$USBDEVICE" = _"" ]; then
	3072	Die "No USB device specified"
	3073	fi
	3074	shift
	3075	fi
	3076	fi
	3077
	3078	if [ "$#" -ne "0" ] ; then
[747]	3079	if [ "$1" = "--findkernel" ] ; then
[2880]	3080	resk=`TryToFindKernelPath`
[1336]	3081	# Avoids logfile content for mondo
	3082	export MONDO_SHARE=""
[2880]	3083	if [ "$resk" = "" ] ; then
[2838]	3084	if [ $KERNEL_IS_XEN = "yes" ]; then
	3085	echo "$xenkernelpath"
[2963]	3086	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3087	MindiExit 0
[2838]	3088	else
[2860]	3089	MindiExit -1
[2838]	3090	fi
[747]	3091	else
[2880]	3092	echo "$resk"
[2963]	3093	LogFile "INFO: kernelpath = $resk"
[2860]	3094	MindiExit 0
[747]	3095	fi
[1720]	3096	elif [ "$1" = "--locatedeps" ] ; then
	3097	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3098	LocateDeps $*
[1720]	3099	# Avoids logfile content for mondo
	3100	export MONDO_SHARE=""
	3101	MindiExit $?
[1815]	3102	elif [ "$1" = "--readalllink" ] ; then
	3103	[ ! "$2" ] && Die "Please specify the binary to look at"
	3104	# Avoids logfile content for mondo
	3105	export MONDO_SHARE=""
[3231]	3106	mr-read-all-link $2
[1815]	3107	MindiExit $?
[2731]	3108	elif [ "$1" = "--makemessage" ] ; then
[2948]	3109	MakeMessageFile \| cut -c1-80
[2731]	3110	MindiExit 0
[747]	3111	elif [ "$1" = "--makemountlist" ] ; then
	3112	[ ! "$2" ] && Die "Please specify the output file"
	3113	MakeMountlist $2
[2432]	3114	CheckMountlist $2
[1336]	3115	# Avoids logfile content for mondo
	3116	export MONDO_SHARE=""
[925]	3117	MindiExit $?
	3118	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3119	echo "Mindi v$MINDI_VERSION"
[1336]	3120	# Avoids logfile content for mondo
	3121	export MONDO_SHARE=""
[925]	3122	MindiExit 0
[747]	3123	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3124	MONDO_TMP=$2
	3125	# Change MINDI_TMP for the one provided by mondo
	3126	# So that it can get back the built files
[2153]	3127	if [ _"$MONDO_TMP" = _"" ]; then
	3128	Die "MONDO_TMP is empty, aborting"
	3129	fi
	3130	if [ _"$MONDO_TMP" = _"/" ]; then
	3131	Die "MONDO_TMP is /, aborting"
	3132	fi
[2092]	3133	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3134	rmdir $MINDI_TMP
[1486]	3135	export MINDI_TMP=$MONDO_TMP
[953]	3136	mkdir -p $MINDI_TMP
[2238]	3137
[1696]	3138	# This is the scratch dir in mondo - subdir images
[1880]	3139	MINDI_CACHE=$3
[2238]	3140
[925]	3141	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3142	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3143
[747]	3144	###
	3145	### Sq-Modification...
	3146	### Attempt to locate kernel specific module path
	3147	### if module path is found then use it other wise use uname -r to set it...
	3148	###
[2629]	3149	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3150	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3151	fi
[2657]	3152	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3153	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3154	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3155	LogAll " using running kernel\'s modules."
[2292]	3156	kernelname=$KERVERRUN
[3149]	3157	else
	3158	LogAll "Using modules for kernel: ${kernelname}"
[747]	3159	fi
[3149]	3160	LogAll "INFO: kernelname = $kernelname"
	3161	LogAll "INFO: kernelpath = $kernelpath"
[747]	3162	###
	3163	### end of Sq-Modification
	3164	###
[925]	3165	TAPEDEV=$5
	3166	TAPESIZE=$6
	3167	FILES_IN_FILELIST=$7
	3168	USE_LZO=$8
	3169	CDRECOVERY=$9
[747]	3170	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3171	IMAGE_DEVS=""
	3172	else
	3173	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3174	fi
[925]	3175	if [ "${11}" ] ; then
	3176	LILO_OPTIONS=""
[3149]	3177	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3178	fi
	3179	LAST_FILELIST_NUMBER=${12}
[747]	3180	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3181	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3182	USE_COMP="${15}"
	3183	USE_LILO="${16}"
[925]	3184	USE_STAR="${17}"
	3185	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3186	DIFFERENTIAL="${19}"
[998]	3187	USE_GZIP="${20}"
	3188	NOT_BOOT="${21}"
[747]	3189	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3190	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[747]	3191	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[2963]	3192	[ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
[1696]	3193	# MONDO_ROOT is the real scratchdir
[1880]	3194	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3195	if [ _"$MONDO_ROOT" != _"" ]; then
	3196	mkdir -p $MONDO_ROOT
	3197	else
	3198	Die "MONDO_ROOT is undefined"
	3199	fi
[747]	3200	else
[3149]	3201	LogScreen "Syntax: mindi (--custom ....)"
[925]	3202	MindiExit -1
[747]	3203	fi
	3204	fi
[2238]	3205
	3206	if [ _"$MINDI_CACHE" != _"" ]; then
	3207	rm -rf $MINDI_CACHE/* 2> /dev/null
	3208	mkdir -p $MINDI_CACHE
	3209	fi
	3210
[747]	3211	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3212
[1684]	3213	if [ _"$MONDO_SHARE" = _"" ]; then
[963]	3214	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3215	LogIt "Latest Mindi is available from http://www.mondorescue.org"
	3216	LogIt "BusyBox sources are available from http://www.busybox.net"
[747]	3217	LogIt "------------------------------------------------------------------------------"
	3218	else
[2963]	3219	LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
[747]	3220	fi
[3231]	3221	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
	3222	LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3223	else
[2963]	3224	LogIt "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3225	MindiExit -1
	3226	fi
[747]	3227
	3228	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3229	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3230	if [ $? -eq 0 ]; then
	3231	modprobe $i 2>&1 > /dev/null
	3232	fi
[747]	3233	done
	3234
	3235	KERN_DISK_MADE=""
	3236
[2963]	3237	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3238	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3239	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3240	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3278]	3241	LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
	3242	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3243	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3244	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3245	mkdir -p $MINDI_TMP/small-all/tmp
[2712]	3246	cd "$MINDI_TMP/small-all"
[3278]	3247	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
[2166]	3248	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
[747]	3249	sleep 2
[963]	3250	LogIt "Done. Exiting."
[925]	3251	MindiExit 0
[747]	3252	fi
	3253
[1690]	3254	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[2963]	3255	LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3256	fi
	3257
[747]	3258	if [ "$kernelpath" = "" ] ; then
[1335]	3259	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[966]	3260	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
	3261	read ch
	3262	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	3263	USE_OWN_KERNEL="yes"
[1809]	3264	else
	3265	USE_OWN_KERNEL="no"
[747]	3266	fi
	3267	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3268	kernelpath=`TryToFindKernelPath`
	3269	if [ "$kernelpath" = "" ] ; then
	3270	echo -n "Please enter kernel path : "
	3271	read kernelpath
	3272	fi
[747]	3273	fi
	3274	fi
[3231]	3275
[1880]	3276	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[2963]	3277	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3278
[3248]	3279	mountpoint=$MINDI_TMP/mountpoint.$$
[1983]	3280	PrepareDataDiskImages
	3281
[747]	3282	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	3283	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
[1983]	3284	export ramdisk_size=$rds
[747]	3285
[2963]	3286	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
[1567]	3287	if [ "$ARCH" = "ia64" ] ; then
[1983]	3288	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
[1567]	3289	else
[3072]	3290	PrepareBootDiskImage_ISOLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size KB disk image."
[747]	3291	fi
	3292
	3293	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	3294	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	3295
[1684]	3296	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3297	ListImagesForUser
	3298	OfferToMakeBootableISO
[1684]	3299	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3300	OfferToMakeBootableUSB
[1684]	3301	fi
[3149]	3302	LogAll "Finished."
[747]	3303	elif [ "$TAPEDEV" ] ; then
[2078]	3304	if [ "$ARCH" != "ia64" ] ; then
	3305	# We need to keep the img file as boot file for ia64 platform
	3306	rm -f $MINDI_CACHE/{img,iso}
	3307	else
	3308	rm -f $MINDI_CACHE/*iso
	3309	fi
[1898]	3310	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3311	OfferToMakeBootableUSB
[1898]	3312	fi
[1983]	3313	OfferToMakeBootableISO
[1880]	3314	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3315	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3316	else
[925]	3317	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3318	fi
[1695]	3319	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3320	OfferToMakeBootableUSB
[747]	3321	else
[1983]	3322	OfferToMakeBootableISO
[747]	3323	fi
	3324	# cleanup
[3149]	3325	LogAll "INFO: $FRIENDLY_OUTSTRING"
[747]	3326	for mtpt in $FLOPPY_WAS_MOUNTED ; do
	3327	mount $mtpt
	3328	done
[925]	3329	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: