source: MondoRescue/branches/3.2/mindi-busybox/shell/math.c@ 3232

Last change on this file since 3232 was 3232, checked in by Bruno Cornec, 10 years ago
  • Update mindi-busybox to 1.21.1
  • Property svn:eol-style set to native
File size: 22.8 KB
Line 
1/*
2 * Arithmetic code ripped out of ash shell for code sharing.
3 *
4 * This code is derived from software contributed to Berkeley by
5 * Kenneth Almquist.
6 *
7 * Original BSD copyright notice is retained at the end of this file.
8 *
9 * Copyright (c) 1989, 1991, 1993, 1994
10 * The Regents of the University of California. All rights reserved.
11 *
12 * Copyright (c) 1997-2005 Herbert Xu <herbert@gondor.apana.org.au>
13 * was re-ported from NetBSD and debianized.
14 *
15 * rewrite arith.y to micro stack based cryptic algorithm by
16 * Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com>
17 *
18 * Modified by Paul Mundt <lethal@linux-sh.org> (c) 2004 to support
19 * dynamic variables.
20 *
21 * Modified by Vladimir Oleynik <dzo@simtreas.ru> (c) 2001-2005 to be
22 * used in busybox and size optimizations,
23 * rewrote arith (see notes to this), added locale support,
24 * rewrote dynamic variables.
25 *
26 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
27 */
28/* Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com>
29 *
30 * Permission is hereby granted, free of charge, to any person obtaining
31 * a copy of this software and associated documentation files (the
32 * "Software"), to deal in the Software without restriction, including
33 * without limitation the rights to use, copy, modify, merge, publish,
34 * distribute, sublicense, and/or sell copies of the Software, and to
35 * permit persons to whom the Software is furnished to do so, subject to
36 * the following conditions:
37 *
38 * The above copyright notice and this permission notice shall be
39 * included in all copies or substantial portions of the Software.
40 *
41 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
42 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
43 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
44 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
45 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
46 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
47 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
48 */
49
50/* This is my infix parser/evaluator. It is optimized for size, intended
51 * as a replacement for yacc-based parsers. However, it may well be faster
52 * than a comparable parser written in yacc. The supported operators are
53 * listed in #defines below. Parens, order of operations, and error handling
54 * are supported. This code is thread safe. The exact expression format should
55 * be that which POSIX specifies for shells.
56 *
57 * The code uses a simple two-stack algorithm. See
58 * http://www.onthenet.com.au/~grahamis/int2008/week02/lect02.html
59 * for a detailed explanation of the infix-to-postfix algorithm on which
60 * this is based (this code differs in that it applies operators immediately
61 * to the stack instead of adding them to a queue to end up with an
62 * expression).
63 */
64
65/*
66 * Aug 24, 2001 Manuel Novoa III
67 *
68 * Reduced the generated code size by about 30% (i386) and fixed several bugs.
69 *
70 * 1) In arith_apply():
71 * a) Cached values of *numptr and &(numptr[-1]).
72 * b) Removed redundant test for zero denominator.
73 *
74 * 2) In arith():
75 * a) Eliminated redundant code for processing operator tokens by moving
76 * to a table-based implementation. Also folded handling of parens
77 * into the table.
78 * b) Combined all 3 loops which called arith_apply to reduce generated
79 * code size at the cost of speed.
80 *
81 * 3) The following expressions were treated as valid by the original code:
82 * 1() , 0! , 1 ( *3 ) .
83 * These bugs have been fixed by internally enclosing the expression in
84 * parens and then checking that all binary ops and right parens are
85 * preceded by a valid expression (NUM_TOKEN).
86 *
87 * Note: It may be desirable to replace Aaron's test for whitespace with
88 * ctype's isspace() if it is used by another busybox applet or if additional
89 * whitespace chars should be considered. Look below the "#include"s for a
90 * precompiler test.
91 */
92/*
93 * Aug 26, 2001 Manuel Novoa III
94 *
95 * Return 0 for null expressions. Pointed out by Vladimir Oleynik.
96 *
97 * Merge in Aaron's comments previously posted to the busybox list,
98 * modified slightly to take account of my changes to the code.
99 *
100 */
101/*
102 * (C) 2003 Vladimir Oleynik <dzo@simtreas.ru>
103 *
104 * - allow access to variable,
105 * use recursive value indirection: c="2*2"; a="c"; echo $((a+=2)) produce 6
106 * - implement assign syntax (VAR=expr, +=, *= etc)
107 * - implement exponentiation (** operator)
108 * - implement comma separated - expr, expr
109 * - implement ++expr --expr expr++ expr--
110 * - implement expr ? expr : expr (but second expr is always calculated)
111 * - allow hexadecimal and octal numbers
112 * - restore lost XOR operator
113 * - protect $((num num)) as true zero expr (Manuel's error)
114 * - always use special isspace(), see comment from bash ;-)
115 */
116#include "libbb.h"
117#include "math.h"
118
119#define lookupvar (math_state->lookupvar)
120#define setvar (math_state->setvar )
121//#define endofname (math_state->endofname)
122
123typedef unsigned char operator;
124
125/* An operator's token id is a bit of a bitfield. The lower 5 bits are the
126 * precedence, and 3 high bits are an ID unique across operators of that
127 * precedence. The ID portion is so that multiple operators can have the
128 * same precedence, ensuring that the leftmost one is evaluated first.
129 * Consider * and /
130 */
131#define tok_decl(prec,id) (((id)<<5) | (prec))
132#define PREC(op) ((op) & 0x1F)
133
134#define TOK_LPAREN tok_decl(0,0)
135
136#define TOK_COMMA tok_decl(1,0)
137
138/* All assignments are right associative and have the same precedence,
139 * but there are 11 of them, which doesn't fit into 3 bits for unique id.
140 * Abusing another precedence level:
141 */
142#define TOK_ASSIGN tok_decl(2,0)
143#define TOK_AND_ASSIGN tok_decl(2,1)
144#define TOK_OR_ASSIGN tok_decl(2,2)
145#define TOK_XOR_ASSIGN tok_decl(2,3)
146#define TOK_PLUS_ASSIGN tok_decl(2,4)
147#define TOK_MINUS_ASSIGN tok_decl(2,5)
148#define TOK_LSHIFT_ASSIGN tok_decl(2,6)
149#define TOK_RSHIFT_ASSIGN tok_decl(2,7)
150
151#define TOK_MUL_ASSIGN tok_decl(3,0)
152#define TOK_DIV_ASSIGN tok_decl(3,1)
153#define TOK_REM_ASSIGN tok_decl(3,2)
154
155#define fix_assignment_prec(prec) do { if (prec == 3) prec = 2; } while (0)
156
157/* Ternary conditional operator is right associative too */
158#define TOK_CONDITIONAL tok_decl(4,0)
159#define TOK_CONDITIONAL_SEP tok_decl(4,1)
160
161#define TOK_OR tok_decl(5,0)
162
163#define TOK_AND tok_decl(6,0)
164
165#define TOK_BOR tok_decl(7,0)
166
167#define TOK_BXOR tok_decl(8,0)
168
169#define TOK_BAND tok_decl(9,0)
170
171#define TOK_EQ tok_decl(10,0)
172#define TOK_NE tok_decl(10,1)
173
174#define TOK_LT tok_decl(11,0)
175#define TOK_GT tok_decl(11,1)
176#define TOK_GE tok_decl(11,2)
177#define TOK_LE tok_decl(11,3)
178
179#define TOK_LSHIFT tok_decl(12,0)
180#define TOK_RSHIFT tok_decl(12,1)
181
182#define TOK_ADD tok_decl(13,0)
183#define TOK_SUB tok_decl(13,1)
184
185#define TOK_MUL tok_decl(14,0)
186#define TOK_DIV tok_decl(14,1)
187#define TOK_REM tok_decl(14,2)
188
189/* Exponent is right associative */
190#define TOK_EXPONENT tok_decl(15,1)
191
192/* Unary operators */
193#define UNARYPREC 16
194#define TOK_BNOT tok_decl(UNARYPREC,0)
195#define TOK_NOT tok_decl(UNARYPREC,1)
196
197#define TOK_UMINUS tok_decl(UNARYPREC+1,0)
198#define TOK_UPLUS tok_decl(UNARYPREC+1,1)
199
200#define PREC_PRE (UNARYPREC+2)
201
202#define TOK_PRE_INC tok_decl(PREC_PRE, 0)
203#define TOK_PRE_DEC tok_decl(PREC_PRE, 1)
204
205#define PREC_POST (UNARYPREC+3)
206
207#define TOK_POST_INC tok_decl(PREC_POST, 0)
208#define TOK_POST_DEC tok_decl(PREC_POST, 1)
209
210#define SPEC_PREC (UNARYPREC+4)
211
212#define TOK_NUM tok_decl(SPEC_PREC, 0)
213#define TOK_RPAREN tok_decl(SPEC_PREC, 1)
214
215static int
216is_assign_op(operator op)
217{
218 operator prec = PREC(op);
219 fix_assignment_prec(prec);
220 return prec == PREC(TOK_ASSIGN)
221 || prec == PREC_PRE
222 || prec == PREC_POST;
223}
224
225static int
226is_right_associative(operator prec)
227{
228 return prec == PREC(TOK_ASSIGN)
229 || prec == PREC(TOK_EXPONENT)
230 || prec == PREC(TOK_CONDITIONAL);
231}
232
233
234typedef struct {
235 arith_t val;
236 /* We acquire second_val only when "expr1 : expr2" part
237 * of ternary ?: op is evaluated.
238 * We treat ?: as two binary ops: (expr ? (expr1 : expr2)).
239 * ':' produces a new value which has two parts, val and second_val;
240 * then '?' selects one of them based on its left side.
241 */
242 arith_t second_val;
243 char second_val_present;
244 /* If NULL then it's just a number, else it's a named variable */
245 char *var;
246} var_or_num_t;
247
248typedef struct remembered_name {
249 struct remembered_name *next;
250 const char *var;
251} remembered_name;
252
253
254static arith_t FAST_FUNC
255evaluate_string(arith_state_t *math_state, const char *expr);
256
257static const char*
258arith_lookup_val(arith_state_t *math_state, var_or_num_t *t)
259{
260 if (t->var) {
261 const char *p = lookupvar(t->var);
262 if (p) {
263 remembered_name *cur;
264 remembered_name cur_save;
265
266 /* did we already see this name?
267 * testcase: a=b; b=a; echo $((a))
268 */
269 for (cur = math_state->list_of_recursed_names; cur; cur = cur->next) {
270 if (strcmp(cur->var, t->var) == 0) {
271 /* Yes */
272 return "expression recursion loop detected";
273 }
274 }
275
276 /* push current var name */
277 cur = math_state->list_of_recursed_names;
278 cur_save.var = t->var;
279 cur_save.next = cur;
280 math_state->list_of_recursed_names = &cur_save;
281
282 /* recursively evaluate p as expression */
283 t->val = evaluate_string(math_state, p);
284
285 /* pop current var name */
286 math_state->list_of_recursed_names = cur;
287
288 return math_state->errmsg;
289 }
290 /* treat undefined var as 0 */
291 t->val = 0;
292 }
293 return 0;
294}
295
296/* "Applying" a token means performing it on the top elements on the integer
297 * stack. For an unary operator it will only change the top element, but a
298 * binary operator will pop two arguments and push the result */
299static NOINLINE const char*
300arith_apply(arith_state_t *math_state, operator op, var_or_num_t *numstack, var_or_num_t **numstackptr)
301{
302#define NUMPTR (*numstackptr)
303
304 var_or_num_t *top_of_stack;
305 arith_t rez;
306 const char *err;
307
308 /* There is no operator that can work without arguments */
309 if (NUMPTR == numstack)
310 goto err;
311
312 top_of_stack = NUMPTR - 1;
313
314 /* Resolve name to value, if needed */
315 err = arith_lookup_val(math_state, top_of_stack);
316 if (err)
317 return err;
318
319 rez = top_of_stack->val;
320 if (op == TOK_UMINUS)
321 rez = -rez;
322 else if (op == TOK_NOT)
323 rez = !rez;
324 else if (op == TOK_BNOT)
325 rez = ~rez;
326 else if (op == TOK_POST_INC || op == TOK_PRE_INC)
327 rez++;
328 else if (op == TOK_POST_DEC || op == TOK_PRE_DEC)
329 rez--;
330 else if (op != TOK_UPLUS) {
331 /* Binary operators */
332 arith_t right_side_val;
333 char bad_second_val;
334
335 /* Binary operators need two arguments */
336 if (top_of_stack == numstack)
337 goto err;
338 /* ...and they pop one */
339 NUMPTR = top_of_stack; /* this decrements NUMPTR */
340
341 bad_second_val = top_of_stack->second_val_present;
342 if (op == TOK_CONDITIONAL) { /* ? operation */
343 /* Make next if (...) protect against
344 * $((expr1 ? expr2)) - that is, missing ": expr" */
345 bad_second_val = !bad_second_val;
346 }
347 if (bad_second_val) {
348 /* Protect against $((expr <not_?_op> expr1 : expr2)) */
349 return "malformed ?: operator";
350 }
351
352 top_of_stack--; /* now points to left side */
353
354 if (op != TOK_ASSIGN) {
355 /* Resolve left side value (unless the op is '=') */
356 err = arith_lookup_val(math_state, top_of_stack);
357 if (err)
358 return err;
359 }
360
361 right_side_val = rez;
362 rez = top_of_stack->val;
363 if (op == TOK_CONDITIONAL) /* ? operation */
364 rez = (rez ? right_side_val : top_of_stack[1].second_val);
365 else if (op == TOK_CONDITIONAL_SEP) { /* : operation */
366 if (top_of_stack == numstack) {
367 /* Protect against $((expr : expr)) */
368 return "malformed ?: operator";
369 }
370 top_of_stack->second_val_present = op;
371 top_of_stack->second_val = right_side_val;
372 }
373 else if (op == TOK_BOR || op == TOK_OR_ASSIGN)
374 rez |= right_side_val;
375 else if (op == TOK_OR)
376 rez = right_side_val || rez;
377 else if (op == TOK_BAND || op == TOK_AND_ASSIGN)
378 rez &= right_side_val;
379 else if (op == TOK_BXOR || op == TOK_XOR_ASSIGN)
380 rez ^= right_side_val;
381 else if (op == TOK_AND)
382 rez = rez && right_side_val;
383 else if (op == TOK_EQ)
384 rez = (rez == right_side_val);
385 else if (op == TOK_NE)
386 rez = (rez != right_side_val);
387 else if (op == TOK_GE)
388 rez = (rez >= right_side_val);
389 else if (op == TOK_RSHIFT || op == TOK_RSHIFT_ASSIGN)
390 rez >>= right_side_val;
391 else if (op == TOK_LSHIFT || op == TOK_LSHIFT_ASSIGN)
392 rez <<= right_side_val;
393 else if (op == TOK_GT)
394 rez = (rez > right_side_val);
395 else if (op == TOK_LT)
396 rez = (rez < right_side_val);
397 else if (op == TOK_LE)
398 rez = (rez <= right_side_val);
399 else if (op == TOK_MUL || op == TOK_MUL_ASSIGN)
400 rez *= right_side_val;
401 else if (op == TOK_ADD || op == TOK_PLUS_ASSIGN)
402 rez += right_side_val;
403 else if (op == TOK_SUB || op == TOK_MINUS_ASSIGN)
404 rez -= right_side_val;
405 else if (op == TOK_ASSIGN || op == TOK_COMMA)
406 rez = right_side_val;
407 else if (op == TOK_EXPONENT) {
408 arith_t c;
409 if (right_side_val < 0)
410 return "exponent less than 0";
411 c = 1;
412 while (--right_side_val >= 0)
413 c *= rez;
414 rez = c;
415 }
416 else if (right_side_val == 0)
417 return "divide by zero";
418 else if (op == TOK_DIV || op == TOK_DIV_ASSIGN)
419 rez /= right_side_val;
420 else if (op == TOK_REM || op == TOK_REM_ASSIGN)
421 rez %= right_side_val;
422 }
423
424 if (is_assign_op(op)) {
425 char buf[sizeof(arith_t)*3 + 2];
426
427 if (top_of_stack->var == NULL) {
428 /* Hmm, 1=2 ? */
429//TODO: actually, bash allows ++7 but for some reason it evals to 7, not 8
430 goto err;
431 }
432 /* Save to shell variable */
433 sprintf(buf, ARITH_FMT, rez);
434 setvar(top_of_stack->var, buf);
435 /* After saving, make previous value for v++ or v-- */
436 if (op == TOK_POST_INC)
437 rez--;
438 else if (op == TOK_POST_DEC)
439 rez++;
440 }
441
442 top_of_stack->val = rez;
443 /* Erase var name, it is just a number now */
444 top_of_stack->var = NULL;
445 return NULL;
446 err:
447 return "arithmetic syntax error";
448#undef NUMPTR
449}
450
451/* longest must be first */
452static const char op_tokens[] ALIGN1 = {
453 '<','<','=',0, TOK_LSHIFT_ASSIGN,
454 '>','>','=',0, TOK_RSHIFT_ASSIGN,
455 '<','<', 0, TOK_LSHIFT,
456 '>','>', 0, TOK_RSHIFT,
457 '|','|', 0, TOK_OR,
458 '&','&', 0, TOK_AND,
459 '!','=', 0, TOK_NE,
460 '<','=', 0, TOK_LE,
461 '>','=', 0, TOK_GE,
462 '=','=', 0, TOK_EQ,
463 '|','=', 0, TOK_OR_ASSIGN,
464 '&','=', 0, TOK_AND_ASSIGN,
465 '*','=', 0, TOK_MUL_ASSIGN,
466 '/','=', 0, TOK_DIV_ASSIGN,
467 '%','=', 0, TOK_REM_ASSIGN,
468 '+','=', 0, TOK_PLUS_ASSIGN,
469 '-','=', 0, TOK_MINUS_ASSIGN,
470 '-','-', 0, TOK_POST_DEC,
471 '^','=', 0, TOK_XOR_ASSIGN,
472 '+','+', 0, TOK_POST_INC,
473 '*','*', 0, TOK_EXPONENT,
474 '!', 0, TOK_NOT,
475 '<', 0, TOK_LT,
476 '>', 0, TOK_GT,
477 '=', 0, TOK_ASSIGN,
478 '|', 0, TOK_BOR,
479 '&', 0, TOK_BAND,
480 '*', 0, TOK_MUL,
481 '/', 0, TOK_DIV,
482 '%', 0, TOK_REM,
483 '+', 0, TOK_ADD,
484 '-', 0, TOK_SUB,
485 '^', 0, TOK_BXOR,
486 /* uniq */
487 '~', 0, TOK_BNOT,
488 ',', 0, TOK_COMMA,
489 '?', 0, TOK_CONDITIONAL,
490 ':', 0, TOK_CONDITIONAL_SEP,
491 ')', 0, TOK_RPAREN,
492 '(', 0, TOK_LPAREN,
493 0
494};
495#define ptr_to_rparen (&op_tokens[sizeof(op_tokens)-7])
496
497const char* FAST_FUNC
498endofname(const char *name)
499{
500 if (!is_name(*name))
501 return name;
502 while (*++name) {
503 if (!is_in_name(*name))
504 break;
505 }
506 return name;
507}
508
509static arith_t FAST_FUNC
510evaluate_string(arith_state_t *math_state, const char *expr)
511{
512 operator lasttok;
513 const char *errmsg;
514 const char *start_expr = expr = skip_whitespace(expr);
515 unsigned expr_len = strlen(expr) + 2;
516 /* Stack of integers */
517 /* The proof that there can be no more than strlen(startbuf)/2+1
518 * integers in any given correct or incorrect expression
519 * is left as an exercise to the reader. */
520 var_or_num_t *const numstack = alloca((expr_len / 2) * sizeof(numstack[0]));
521 var_or_num_t *numstackptr = numstack;
522 /* Stack of operator tokens */
523 operator *const stack = alloca(expr_len * sizeof(stack[0]));
524 operator *stackptr = stack;
525
526 /* Start with a left paren */
527 *stackptr++ = lasttok = TOK_LPAREN;
528 errmsg = NULL;
529
530 while (1) {
531 const char *p;
532 operator op;
533 operator prec;
534 char arithval;
535
536 expr = skip_whitespace(expr);
537 arithval = *expr;
538 if (arithval == '\0') {
539 if (expr == start_expr) {
540 /* Null expression */
541 numstack->val = 0;
542 goto ret;
543 }
544
545 /* This is only reached after all tokens have been extracted from the
546 * input stream. If there are still tokens on the operator stack, they
547 * are to be applied in order. At the end, there should be a final
548 * result on the integer stack */
549
550 if (expr != ptr_to_rparen + 1) {
551 /* If we haven't done so already,
552 * append a closing right paren
553 * and let the loop process it */
554 expr = ptr_to_rparen;
555 continue;
556 }
557 /* At this point, we're done with the expression */
558 if (numstackptr != numstack + 1) {
559 /* ...but if there isn't, it's bad */
560 goto err;
561 }
562 if (numstack->var) {
563 /* expression is $((var)) only, lookup now */
564 errmsg = arith_lookup_val(math_state, numstack);
565 }
566 goto ret;
567 }
568
569 p = endofname(expr);
570 if (p != expr) {
571 /* Name */
572 size_t var_name_size = (p-expr) + 1; /* +1 for NUL */
573 numstackptr->var = alloca(var_name_size);
574 safe_strncpy(numstackptr->var, expr, var_name_size);
575 expr = p;
576 num:
577 numstackptr->second_val_present = 0;
578 numstackptr++;
579 lasttok = TOK_NUM;
580 continue;
581 }
582
583 if (isdigit(arithval)) {
584 /* Number */
585 numstackptr->var = NULL;
586 errno = 0;
587 numstackptr->val = strto_arith_t(expr, (char**) &expr, 0);
588 if (errno)
589 numstackptr->val = 0; /* bash compat */
590 goto num;
591 }
592
593 /* Should be an operator */
594 p = op_tokens;
595 while (1) {
596// TODO: bash allows 7+++v, treats it as 7 + ++v
597// we treat it as 7++ + v and reject
598 /* Compare expr to current op_tokens[] element */
599 const char *e = expr;
600 while (1) {
601 if (*p == '\0') {
602 /* Match: operator is found */
603 expr = e;
604 goto tok_found;
605 }
606 if (*p != *e)
607 break;
608 p++;
609 e++;
610 }
611 /* No match, go to next element of op_tokens[] */
612 while (*p)
613 p++;
614 p += 2; /* skip NUL and TOK_foo bytes */
615 if (*p == '\0') {
616 /* No next element, operator not found */
617 //math_state->syntax_error_at = expr;
618 goto err;
619 }
620 }
621 tok_found:
622 op = p[1]; /* fetch TOK_foo value */
623 /* NB: expr now points past the operator */
624
625 /* post grammar: a++ reduce to num */
626 if (lasttok == TOK_POST_INC || lasttok == TOK_POST_DEC)
627 lasttok = TOK_NUM;
628
629 /* Plus and minus are binary (not unary) _only_ if the last
630 * token was a number, or a right paren (which pretends to be
631 * a number, since it evaluates to one). Think about it.
632 * It makes sense. */
633 if (lasttok != TOK_NUM) {
634 switch (op) {
635 case TOK_ADD:
636 op = TOK_UPLUS;
637 break;
638 case TOK_SUB:
639 op = TOK_UMINUS;
640 break;
641 case TOK_POST_INC:
642 op = TOK_PRE_INC;
643 break;
644 case TOK_POST_DEC:
645 op = TOK_PRE_DEC;
646 break;
647 }
648 }
649 /* We don't want an unary operator to cause recursive descent on the
650 * stack, because there can be many in a row and it could cause an
651 * operator to be evaluated before its argument is pushed onto the
652 * integer stack.
653 * But for binary operators, "apply" everything on the operator
654 * stack until we find an operator with a lesser priority than the
655 * one we have just extracted. If op is right-associative,
656 * then stop "applying" on the equal priority too.
657 * Left paren is given the lowest priority so it will never be
658 * "applied" in this way.
659 */
660 prec = PREC(op);
661 if ((prec > 0 && prec < UNARYPREC) || prec == SPEC_PREC) {
662 /* not left paren or unary */
663 if (lasttok != TOK_NUM) {
664 /* binary op must be preceded by a num */
665 goto err;
666 }
667 while (stackptr != stack) {
668 operator prev_op = *--stackptr;
669 if (op == TOK_RPAREN) {
670 /* The algorithm employed here is simple: while we don't
671 * hit an open paren nor the bottom of the stack, pop
672 * tokens and apply them */
673 if (prev_op == TOK_LPAREN) {
674 /* Any operator directly after a
675 * close paren should consider itself binary */
676 lasttok = TOK_NUM;
677 goto next;
678 }
679 } else {
680 operator prev_prec = PREC(prev_op);
681 fix_assignment_prec(prec);
682 fix_assignment_prec(prev_prec);
683 if (prev_prec < prec
684 || (prev_prec == prec && is_right_associative(prec))
685 ) {
686 stackptr++;
687 break;
688 }
689 }
690 errmsg = arith_apply(math_state, prev_op, numstack, &numstackptr);
691 if (errmsg)
692 goto err_with_custom_msg;
693 }
694 if (op == TOK_RPAREN)
695 goto err;
696 }
697
698 /* Push this operator to the stack and remember it */
699 *stackptr++ = lasttok = op;
700 next: ;
701 } /* while (1) */
702
703 err:
704 errmsg = "arithmetic syntax error";
705 err_with_custom_msg:
706 numstack->val = -1;
707 ret:
708 math_state->errmsg = errmsg;
709 return numstack->val;
710}
711
712arith_t FAST_FUNC
713arith(arith_state_t *math_state, const char *expr)
714{
715 math_state->errmsg = NULL;
716 math_state->list_of_recursed_names = NULL;
717 return evaluate_string(math_state, expr);
718}
719
720/*
721 * Copyright (c) 1989, 1991, 1993, 1994
722 * The Regents of the University of California. All rights reserved.
723 *
724 * This code is derived from software contributed to Berkeley by
725 * Kenneth Almquist.
726 *
727 * Redistribution and use in source and binary forms, with or without
728 * modification, are permitted provided that the following conditions
729 * are met:
730 * 1. Redistributions of source code must retain the above copyright
731 * notice, this list of conditions and the following disclaimer.
732 * 2. Redistributions in binary form must reproduce the above copyright
733 * notice, this list of conditions and the following disclaimer in the
734 * documentation and/or other materials provided with the distribution.
735 * 3. Neither the name of the University nor the names of its contributors
736 * may be used to endorse or promote products derived from this software
737 * without specific prior written permission.
738 *
739 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
740 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
741 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
742 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
743 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
744 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
745 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
746 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
747 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
748 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
749 * SUCH DAMAGE.
750 */
Note: See TracBrowser for help on using the repository browser.