source: MondoRescue/branches/2.2.7/mindi/mindi @ 2039

Last change on this file since 2039 was 2039, checked in by Bruno Cornec, 13 years ago
  • Use native ld.so config files instead of static ones (Idea from Mark Pinkerton)
  • Property svn:keywords set to Rev Id
File size: 100.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 2039 2008-10-06 22:16:22Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17
18ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20MINDI_REV=PBREV
21MINDI_VER=PBVER
22
23MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
24MINDI_PREFIX=XXX
25MINDI_CONF=YYY
26MINDI_SBIN=${MINDI_PREFIX}/sbin
27MINDI_LIB=LLL
28
29# Temporary directory for mindi
30TMPDIR=/tmp
31
32EXTRA_SPACE=49152       # increase if you run out of ramdisk space
33BOOT_SIZE=16384         # size of the boot disk
34
35PROMPT_MAKE_CD_IMAGE="yes"
36    # Ask if you want to make a CD Image to be written?
37    # if this is set to 'no', then the image will be created automatically
38
39PROMPT_MAKE_USB_IMAGE="yes"
40    # Ask if you want to make a USB Image to be written?
41    # if this is set to 'no', then the image will be created automatically
42
43USE_OWN_KERNEL="yes"
44    # If set to "no", you will be prompted for whether or not
45    # you want to use your own kernel, or the supplied default.
46    # If "yes" mindi will automatically use your own kernel.
47
48MY_FSTAB=/etc/fstab
49TAPE_MODS="ht st osst ide-tape ide_tape"
50SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
51
52# ide-probe-mod
53IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
54PCMCIA_MODS="pcmcia_core ds yenta_socket"
55USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
56NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
57CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
58# Those modules will only go on the backup media, not the boot media.
59EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
60# Replace with that line for HP OCMP e.g.
61#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
62DENY_MODS="kqemu"
63# Force some modules to be included
64FORCE_MODS=""
65
66LOGFILE=/var/log/mindi.log
67MINDI_CACHE=/var/cache/mindi
68BOOT_MEDIA_MESSAGE="\
69To format and restore all files automatically, type 'nuke' <enter>.\n\
70To restore some/all files interactively, type 'interactive' <enter>.\n\
71To compare the archives with your filesystem, type 'compare' <enter>.\n\
72To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
73You may add one or more of the following parameters as well:-\n\n\
74        donteject - mondorestore will not eject the CD; this is useful if, for\n\
75                    instance, your PC's case has a concealed CD-ROM drive\n\
76        noresize  - your mountlist will not be adjusted to use your unallocated\n\
77                    hard disk space\n\
78        textonly  - do not call any Newt library routines; this is unattractive\n\
79                    but valuable if you find your Newt library has bugs in it\n\n\
80e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
81a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
82"
83FDISK=$MINDI_SBIN/parted2fdisk
84
85# Using a config file allow to overwrite some values
86MINDI_CONFIG="$MINDI_CONF/mindi.conf"
87if [ -f $MINDI_CONFIG ]; then
88    . $MINDI_CONFIG
89fi
90DEPLIST_FILE="$MINDI_CONF/deplist.txt"
91ISO_CMD="/usr/bin/mkisofs"
92ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
93
94# Now we can create what we need
95export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
96
97# ----------------------------------------------------------------------------
98
99
100AbortHere() {
101    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
102    Die "Program is terminating in response to signal received from OS/user"
103}
104
105
106Aborted() {
107    trap SIGHUP SIGTERM SIGTRAP SIGINT
108    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
109    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
110    Die "User abort."
111}
112
113
114AddFileToCfgIfExists() {
115    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
116}
117
118
119AddKeyboardMappingFile() {
120    local mappath r included_list included_item i res ii sss
121    mappath=$1
122    KBDEPTH=$(($KBDEPTH+1))
123    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
124    if [ -e "$bigdir/$mappath" ] ; then
125        echo "$mappath already added" >> $LOGFILE
126        return
127    elif [ -d "$bigdir/$mappath" ] ; then
128        echo "Cannot add $mappath: it's a directory. Sorry."
129        return
130    fi
131    echo "Added kbd map $mappath" >> $LOGFILE
132    if [ ! -e "$mappath" ] ; then
133            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
134        if [ ! -e "$mappath" ] ; then
135            LogIt "Cannot add $mappath: kbd map file not found"
136            return
137        fi
138    else
139        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
140    fi
141
142    mkdir -p $bigdir/etc
143    tar cf - $mappath 2>> /dev/null | (cd $bigdir ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir"
144    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
145        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
146    else
147        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
148    fi
149    for included_item in $included_list ; do
150        if [ ! -e "$included_item" ] ; then
151                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
152            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
153            for ii in $sss ; do
154                [ -e "$ii" ] && AddKeyboardMappingFile $ii
155            done
156        else
157            AddKeyboardMappingFile $included_item
158        fi
159    done
160}
161
162
163CopyDependenciesToDirectory() {
164    local outdir incoming fname counter d found
165    outdir=$1
166    mkdir -p $outdir
167    incoming=`ReadLine`
168    counter=0
169    while [ "$incoming" != "" ] ; do
170        # Non absolute file names should not arrive till here => skipped
171        if [ `echo "$incoming" | cut -c1` != '/' ]; then
172            LogIt "Unable to handle $incoming"
173            incoming=`ReadLine`
174            continue
175        fi
176        # no parent directory of incoming should be a link, copy is not possible in that case
177        d=`dirname "$incoming"`
178        found="false"
179        while [ $d != "/" -a $found = "false" ]; do
180            [ -h "$d" ] && found="true"
181            d=`dirname "$d"`
182        done
183        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
184            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
185        elif [ -e "$incoming" ] && [ $found = "false" ]; then
186            tar cf - $incoming 2> /dev/null | (cd $outdir ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
187
188            # Only uncompress modules if not using udevd
189            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
190                gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
191            fi
192            [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
193            counter=$(($counter+1))
194            if [ "$counter" -ge "5" ] ; then
195                counter=0
196                echo -en "."
197            fi
198        fi
199        incoming=`ReadLine`
200    done
201}
202
203
204CountItemsIn() {
205    local r
206    r=0
207    for q in $1 ; do
208        r=$(($r+1))
209    done
210    echo $r
211}
212
213
214# Last function called before exiting
215# Parameter is exit code value
216MindiExit() {
217    local my_partitions
218
219    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
220    echo "End date : `date`" >> $LOGFILE
221    if [ _"$MONDO_SHARE" != _"" ] ; then
222        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
223        cat $LOGFILE >> /var/log/mondoarchive.log
224        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
225    fi
226
227    cd /
228    sync&
229
230    # Unmount what could remain mounted
231    my_partitions=`mount | grep -F $$ | cut -f1 -d' '`
232    [ "$my_partitions" != "" ] && umount $my_partitions
233    # Clean temporary files only when standalone mindi
234    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
235        rm -Rf $MINDI_TMP
236    fi
237    exit $1
238}
239
240Die() {
241    local i
242    if [ "$1" = "" ] ; then
243        LogIt "FATAL ERROR"
244    else
245        LogIt "FATAL ERROR. $1"
246    fi
247
248    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
249    LogIt "See http://www.mondorescue.org for more information."
250    LogIt "WE CANNOT HELP unless you enclose that file.\n"
251    MindiExit -1
252}
253
254
255DropOptimizedLibraries() {
256    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
257    filelist=$1
258    outdir=$2
259
260    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
261    if [ "$list_of_optimized_libraries" = "" ] ; then
262        return 0
263    fi
264    echo -en "Dropping i686-optimized libraries if appropriate"
265    for optimized_lib_name in $list_of_optimized_libraries ; do
266        echo -en "."
267        reason=""
268        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
269        echo "$vanilla_lib_name" >> $filelist
270        resolved=$vanilla_lib_name
271        echo "Adding $resolved to filelist" >> $LOGFILE
272        resolved=`ReadAllLink $resolved`
273        echo "Adding $resolved to filelist" >> $LOGFILE
274        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
275        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
276        ln -sf $vanilla_lib_name $outdir$optimized_lib_name
277        echo "Excluding $optimized_lib_name" >> $LOGFILE
278        grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
279        echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
280        echo "$vanilla_lib_name" >> $filelist.tmp
281        mv -f $filelist.tmp $filelist
282    done
283    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
284    mv -f $filelist.tmp $filelist
285    echo -e "$DONE"
286}
287
288
289FindAndAddUserKeyboardMappingFile() {
290    local r res mapfile mappath included_item included_list keyfile mp locale
291    LogIt "Analyzing your keyboard's configuration."
292    KEYDIR=/lib/kbd
293    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
294    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
295    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
296    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
297    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
298    if [ ! -e "$KEYDIR" ] ; then
299        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
300        return 0
301    fi
302    if [ -e "/etc/sysconfig/keyboard" ] ; then
303        echo "Red Hat-style config detected." >> $LOGFILE
304        keyfile=/etc/sysconfig/keyboard
305    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
306        echo "Slackware-style config detected." >> $LOGFILE
307        keyfile=/etc/rc.d/rc.keymap
308    elif [ -e "/etc/rc.config" ] ; then
309        echo "Debian-style config detected." >> $LOGFILE
310        keyfile=/etc/rc.config
311    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
312        echo "Debian-style config detected." >> $LOGFILE
313        echo -en "Adding the following keyboard mapping tables: "
314        mkdir -p $bigdir/tmp
315        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
316        KBDEPTH=0
317        mkdir -p $bigdir/etc/console
318        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
319        echo -e "$DONE"
320        return 0
321    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
322        echo "Ubuntu-style config detected." >> $LOGFILE
323        echo -en "Adding the following keyboard mapping tables: "
324        mkdir -p $bigdir/tmp
325        echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
326        KBDEPTH=0
327        mkdir -p $bigdir/etc/console-setup
328        cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
329        echo -e "$DONE"
330        return 0
331    elif [ -e "/etc/conf.d/keymaps" ] ; then
332        echo "Gentoo-style config detected." >> $LOGFILE
333        keyfile=/etc/conf.d/keymaps
334    else
335        echo -en "Searching for rc.config ..."
336        keyfile=`find /etc -name rc.config | head -n1`
337        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
338            LogIt "Unknown config detected. Default keyboard map will be used."
339            return
340        else
341            echo "Found $keyfile" >> $LOGFILE
342        fi
343    fi
344    if [ ! -e "$KEYDIR/keymaps" ] ; then
345        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
346        return
347    fi
348    echo "keyfile=$keyfile" >> $LOGFILE
349    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
350    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
351    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo
352    echo "locale=$locale" >> $LOGFILE
353    #
354    # Process the keymaps dir once for all
355    # AddKeyboardMappingFile will use it recursively
356    #
357    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
358    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
359    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
360    # If we have multiple keymaps then log it !!
361    echo "$mp" | grep -q " "
362    if [ $? -eq 0 ]; then
363        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
364        echo "The following one will be used" >> $LOGFILE
365    fi
366    for i in $mp ; do
367        mappath=$i
368        [ -e "$i" ] && [ ! -d "$i" ] && break
369    done
370    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
371            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
372    fi
373    echo "mappath = $mappath" >> $LOGFILE
374    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
375        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
376        return
377    fi
378    echo -en "Adding the following keyboard mapping tables: "
379    mkdir -p $bigdir/tmp
380    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
381    KBDElabel=memtest\nPTH=0
382    AddKeyboardMappingFile $mappath
383    echo -e "$DONE"
384    rm -f $MINDI_TMP/keymaps.find
385    return 0
386}
387
388
389FindIsolinuxBinary() {
390    ISOLINUX=/usr/lib/isolinux.bin
391    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
392    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
393    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
394    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
395    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
396    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
397    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
398    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
399}
400
401
402FindSpecificModuleInPath() {
403    local modpaths pwd line
404    pwd=`pwd`
405    if [ "$YOUR_KERNEL_SUCKS" ] ; then
406        cd $MINDI_TMP
407    else
408        cd /
409    fi
410    if [ ! -e "$1" ] ; then
411        LogIt "WARNING - cannot search specific path '$1'"
412        return 1
413    fi
414    modpaths=`find $1 -name $2.*o -type f`
415    #[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
416    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
417    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
418    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
419    echo "$modpaths"
420    cd $pwd
421}
422
423
424GenerateGiantDependencyList() {
425    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
426
427    echo -en "Analyzing dependency requirements"
428    outfile=$1
429    tempfile=$MINDI_TMP/$$.txt
430    incoming=`ReadLine`
431
432    > $tempfile
433    progress=0
434    res=0
435    noof_lines=$2
436    while [ "$incoming" != "" ] ; do
437        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
438            incoming=`ReadLine`
439            continue
440        fi
441        if [ "$incoming" = "LVMFILES:" ] ; then
442            break
443        fi
444        filelist=`GenerateListForFile "$incoming"`
445        r=$?
446        [ "$r" -ne "0" ] && LogIt "$incoming not found"
447        res=$(($res+$r))
448#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
449        for fname in $filelist ; do
450            [ "$fname" != "" ] && echo "$fname" >> $tempfile
451        done
452        progress=$(($progress+1))
453        echo -en "\r\t\t\t\t\t\t\t\t"
454        i=$(($progress*100))
455        i=$(($i/$noof_lines))
456        echo -en "$i"
457        echo -en "%"
458        modres=$(($progress%4))
459        [ "$modres" -eq "0" ] && echo -en "\t/"
460        [ "$modres" -eq "1" ] && echo -en "\t-"
461        [ "$modres" -eq "2" ] && echo -en "\t\\"
462        [ "$modres" -eq "3" ] && echo -en "\t|"
463        incoming=`ReadLine`
464    done
465    if  [ "$incoming" = "LVMFILES:" ] ; then
466        incoming=`ReadLine`
467        lvmversion=""
468        while [ "$incoming" != "" ] ; do
469            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
470                incoming=`ReadLine`
471                continue
472            fi
473            filelist=`GenerateListForFile "$incoming"`
474            for tool in $filelist ; do
475                lvmresolved=`readlink -f $tool`
476                if [ "$tool" = "$lvmresolved" ]; then
477                    echo "$tool" >> $tempfile
478                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
479                    if [ "$lvmversion" = "" ] ; then
480                        lvmversion=`$lvmresolved`
481                        echo "$lvmresolved" >> $tempfile
482                    fi
483                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
484                    if [ "$lvmversion" = "200" ]; then
485                        # pvdata and lvmcreate_initrd don't exist in LVM2
486                        case "$toolstripped" in
487                        "pvdata")
488                            continue
489                            ;;
490                        "lvmcreate_initrd")
491                            continue
492                            ;;
493                        esac
494                    fi
495                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
496                    if [ -e "$toolpath" ] ; then
497                        echo "$toolpath" >> $tempfile
498                        echo "$tool" >> $tempfile
499                    else
500                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
501                    fi
502                    if [ -e "$toolpath" ] ; then
503                        echo "$toolpath" >> $tempfile
504                        echo "$tool" >> $tempfile
505                    else
506                        echo "Where are your LVM-Tools? Couldn't find $tool"
507                    fi
508                else
509                    echo "$tool" >> $tempfile
510                fi
511            done
512            progress=$(($progress+1))
513            echo -en "\r\t\t\t\t\t\t\t\t"
514            i=$(($progress*100))
515            i=$(($i/$noof_lines))
516            echo -en "$i"
517            echo -en "%"
518            modres=$(($progress%4))
519            [ "$modres" -eq "0" ] && echo -en "\t/"
520            [ "$modres" -eq "1" ] && echo -en "\t-"
521            [ "$modres" -eq "2" ] && echo -en "\t\\"
522            [ "$modres" -eq "3" ] && echo -en "\t|"
523            incoming=`ReadLine`
524        done
525    fi
526    echo -en "$DONE\nMaking complete dependency list"
527
528    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
529    mv -f $tempfile.new $tempfile
530    > $outfile.pre
531    progress=0
532    noof_lines=`cat $tempfile | wc -l`
533    echo "---------------------------------" >> $LOGFILE
534    echo "List of dependencies:             " >> $LOGFILE
535    echo "---------------------------------" >> $LOGFILE
536    for fname in `cat $tempfile` ; do
537        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
538        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
539        progress=$(($progress+1))
540        echo -en "\r\t\t\t\t\t\t\t\t"
541        i=$(($progress*100))
542        i=$(($i/$noof_lines))
543        echo -en "$i"
544        echo -en "%"
545        modres=$(($progress%4))
546        [ "$modres" -eq "0" ] && echo -en "\t/"
547        [ "$modres" -eq "1" ] && echo -en "\t-"
548        [ "$modres" -eq "2" ] && echo -en "\t\\"
549        [ "$modres" -eq "3" ] && echo -en "\t|"
550    done
551    if [ _"$MONDO_SHARE" != _"" ]; then
552        mkdir -p $bigdir/tmp
553        mkdir -p $bigdir/sbin
554        mkdir -p $bigdir/bin
555        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
556            LogIt "\nIncorporating post-nuke tarball"
557            old_pwd=`pwd`
558            cd $bigdir
559            tar -zxf $MINDI_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
560            cd $old_pwd
561        fi
562        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
563            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
564        else
565            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
566            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
567            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
568            Die "Odd."
569        fi
570        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
571        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
572            LogIt "Incorporating NFS-related settings"
573            for r in NFS-* ISO-PREFIX ; do
574                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
575                echo "Copying $r to ramdisk" >> $LOGFILE
576            done
577        fi
578    fi
579    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
580    rm -f $tempfile $outfile.pre
581    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
582    return $res
583}
584
585
586GenerateListForFile() {
587    local files_found loc fname incoming i res
588    incoming="$1"
589    files_found=""
590    res=0
591
592    for fname in $incoming ; do
593        files_found="$files_found `LocateFile $fname`"
594    done
595
596    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
597}
598
599
600# Returns all disk devices which are part of a raid array
601GetAllRaidMembers() {
602    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
603}
604
605
606GetFileSizeList() {
607    local i
608    for i in `find $1 -type d -o -print` ; do
609        du -sk $i
610    done
611}
612
613
614GetHomeDir() {
615    local res loc
616    loc=`which $1 2>/dev/null`
617    res=`file $loc | $AWK '{print $NF;}'`
618    dirname $res
619}
620
621
622# Check kernel filesystem capabilites for accessing initrd image
623#
624# Interface definition:
625# param #1: absolute path to kernel image
626GetInitrdFilesystemToUse() {
627
628    # interface test: make sure we have one parameter
629    if [ $# -ne 1 ]; then
630        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
631    fi
632
633    # interface parameters
634    local lvKernelImage=$1
635
636    # local constants (filesystem magic strings)
637    local lcMagicCramfs="<3>cramfs: wrong magic"
638    local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
639    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs..."
640
641    # local variables
642    local lvOffset
643    local lvScanRes
644    local lvUseFilesystem
645
646    # say where we are.
647    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
648
649    # verify that file exists
650    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
651
652    # Kernel may be gzip compressed
653    file $lvKernelImage 2>&1 | grep -q gzip
654    if [ $? -eq 0 ]; then
655        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
656    else
657        # get offet of gzip magic "1f8b0800" in file
658        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}'`
659        [ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
660        lvOffset=`expr $lvOffset / 2`
661        echo "  GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
662
663        # scan kernel image for initrd filessystem support
664        lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
665    fi
666
667    # determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
668    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
669        lvUseFilesystem="ext2fs"
670    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
671        lvUseFilesystem="initramfs"
672    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
673        lvUseFilesystem="cramfs"
674    else
675        lvUseFilesystem="UNSUPPORTED"
676    fi
677
678    # say what we are using
679    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
680
681    # return file system to use
682    echo "$lvUseFilesystem"
683
684}
685
686# Searches parent raid device of given disk device
687# $1: disk device (i.e. /dev/hda1)
688GetParentRaidDev() {
689    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
690}
691
692
693# Searches members of raid device
694# $1: raid device (/dev/md...)
695GetRaidDevMembers() {
696    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
697}
698
699
700HackPathsToFailsafe() {
701    local incoming newpath kver stub i pwd
702    kver=`uname -r`
703    incoming=`ReadLine`
704    pwd=`pwd`
705    cd $MINDI_TMP
706    while [ "$incoming" != "" ] ; do
707        stub=`basename $incoming`
708        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
709        for i in $newpath ; do
710            echo "$i"
711        done
712        read incoming
713    done
714    cd $pwd
715}
716
717
718ListAllPartitions() {
719    local res currline partition all_partitions ap_orig remaining i j
720
721    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/fdd|cdr|zip|floppy/ {print $1}'
722    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
723    if [ -e "/vmfs/volumes" ]; then
724        # For VMWare ESX 3 get the device names of these volumes
725        vdf -P | grep -E '/vmfs/volumes' | awk '{print $1}'
726    fi
727    return
728}
729
730
731ListImagesForUser() {
732    local path fname
733    path=$MINDI_CACHE
734    echo -en "In the directory '$path' you will find the images:-\n"
735    for fname in `ls $path | grep -F mindi-` ; do
736        printf "%19s " $fname
737    done
738    echo " "
739}
740
741
742ListKernelModulePaths() {
743    local module_list module fname oss r kern
744    oss="/root/oss/modules"
745    module_list="$MODULES"
746    # Remove unwanted modules from list
747    for i in $DENY_MODS; do
748        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
749        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
750    done
751###
752### Sq-Modification ... Use kernelname for module search path if specified
753###
754    # kern="`uname -r`"
755    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
756    then
757        kern=${kernelname}
758    else
759        kern="`uname -r`"
760    fi
761###
762### Sq-Mod End
763###
764    for module in $module_list $EXTRA_MODS ; do
765        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
766        echo "module $module --> $r" >> $LOGFILE
767        [ "$r" ] && echo "$r"
768        [ -f "$oss" ] && find $oss | grep -F $module
769    done
770    find /lib/modules/$kern/modules.* -type f 2> /dev/null
771    [ -f "$oss" ] && find $oss.* 2> /dev/null
772}
773
774#
775# Critical function which computes all dependencies (dyn. lib.)
776# for a list of binaries
777#
778LocateDeps() {
779    local incoming fname deps
780    incoming="$*"
781    for fname in $incoming ; do
782        if [ ! -e "$fname" ] ; then
783            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
784            if echo $fname | grep lvm &> /dev/null ; then
785                echo "This warning only affects you if you are using LVM." >> $LOGFILE
786                if echo "$MODULES" | grep lvm &> /dev/null ; then
787                    echo "I think you are, so please take heed!" >> $LOGFILE
788                else
789                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
790                fi
791            fi
792        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
793            echo "$fname is softlink" >> $LOGFILE
794        else
795            ldd $fname 2> /dev/null | ProcessLDD
796        fi
797    done
798}
799
800
801# Give all symlinks recursively of a full path name
802ReadAllLink() {
803    file="$1"
804
805    echo "$file"
806    if [ ! -h $file ]; then
807        return 0
808    fi
809
810    link=`readlink $file`
811    d=`dirname $file`
812    fchar=`echo $link | cut -c1`
813    # If mother dir is a link print it
814    if [ -h "$d" ]; then
815        echo "$d"
816        d=`readlink $d`
817    fi
818    if [ "$fchar" != "/" ]; then
819        # Relative or local link
820        ReadAllLink "$d/$link" 
821    else
822        # Absolute path
823        ReadAllLink $link 
824    fi
825}
826
827
828LocateFile() {
829    local i path fname_to_find location output resolved tmp stub cache_id loclist
830    fname_to_find="$1"
831    # It's an absolute path
832    if echo "$fname_to_find" | grep -x "/.*" ; then
833        output="$fname_to_find"
834        if [ -h "$output" ] ; then
835            output="`ReadAllLink $output` $output"
836        fi
837        echo "$output"
838        return 0
839    fi
840    # It's not an absolute path
841    output=""
842    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
843    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
844        [ -h "$path" ] && continue
845        [ ! -e "$path/$fname_to_find" ] && continue
846        output="$path/$fname_to_find $output"
847        if [ -h "$path/$fname_to_find" ] ; then
848            output="`ReadAllLink $path/$fname_to_find` $output"
849        fi
850    done
851    if [ "$output" = "" ] ; then
852        return 1
853    fi
854    echo "$output"
855    return 0
856}
857
858
859LogIt() {
860    if [ -e /dev/stderr ] ; then
861        echo -e "$1" >> /dev/stderr
862    elif [ -e /usr/bin/logger ] ; then
863        /usr/bin/logger -s $1
864    fi
865    echo -e "$1" >> $LOGFILE
866}
867
868
869# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
870MakeMondoConfigFile() {
871    local outfile use_lzo use_comp use_star
872    outfile=$1
873    > $outfile
874    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
875    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
876    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
877    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
878    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
879    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
880    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
881    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
882    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
883    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
884    echo "use-lzo $use_lzo" >> $outfile
885    echo "use-gzip $use_gzip" >> $outfile
886    echo "use-star $use_star" >> $outfile
887    echo "use-comp $use_comp" >> $outfile
888    echo "datestamp `date`" >> $outfile
889    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
890    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
891    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
892    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
893    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
894    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
895    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
896    AddFileToCfgIfExists $MINDI_TMP/NFS-DEV           nfs-dev           $outfile
897    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
898    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
899    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
900    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
901    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
902    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
903    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
904    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
905    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
906    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
907    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
908    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
909    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
910    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
911}
912
913
914MakeMountlist() {
915    local scratchdir mountlist all_partitions current_partition \
916partition_size partition_format outstring partition_number \
917partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
918absolute_partition old_partition_fmt current_lvolume uname skip
919
920    echo "Your raw fstab file looks like this:" >> $LOGFILE
921    echo "------------------------------------" >> $LOGFILE
922    cat $MY_FSTAB >> $LOGFILE
923    echo "Your mountlist will look like this:" | tee -a $LOGFILE
924    echo "-----------------------------------" >> $LOGFILE
925
926# scratchdir, mountlist(OUT)
927    scratchdir=$MINDI_TMP
928    mountlist=$1
929
930# NB: partition = device
931# NB: mountpt = where the device is mounted
932
933    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
934
935    [ "$mountlist" != "" ] && rm -Rf $mountlist
936    > $mountlist
937    all_partitions=""
938   
939    if [ $LVM != "false" ]; then
940        echo -en "Analyzing LVM...\n"
941        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
942        if [ $? -ne 0 ]; then
943            LVM="false"
944        fi
945        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-32`
946    fi
947    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
948#    echo "all partitions = $all_partitions" > /dev/stderr
949    for i in $IMAGE_DEVS ; do
950        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
951    done
952    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
953    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
954    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
955    for c_p in $all_partitions ; do
956        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] && continue
957        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
958        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
959            current_partition=`readlink -f $c_p`
960            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
961            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
962        else
963            current_partition="$c_p"
964        fi
965        [ "$c_p" = "none" ] && continue
966        redhat_label=""
967        label=""
968        uuid=""
969        absolute_partition=`readlink -f $c_p`
970        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
971
972        # Detects noauto partitions not mounted and exclude them
973        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
974        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
975            continue
976        fi
977
978        # set default in case we dont't find it
979        str_to_find_fmt_with=$current_partition
980
981        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
982        # current_partition contains only first column of /etc/fstab
983        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
984            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
985            actual_dev=""
986
987            # 1st try, findfs - the RHEL way of finding labels and their partitions
988            if [ -x "/sbin/findfs" ]; then
989                actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
990            fi
991   
992            # 2nd try : blkid, the good way for all LABEL except swap
993            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
994                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
995                # For LVM FS it will give a /dev/dm-# which should then be converted
996                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
997                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
998                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
999                    for dev in `ls /dev/mapper/*`; do
1000                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1001                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1002                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1003                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1004                            break
1005                        fi
1006                    done
1007                fi
1008            fi
1009   
1010            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1011            # For LVM gives a /dev/mapper entry
1012            if [ "x$actual_dev" = "x" ]; then
1013                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1014            fi
1015   
1016            # 4th try, with vol_id
1017            # SWAP only
1018            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1019                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1020                for dev_swap in $list_swaps ; do
1021                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1022                    if [ "x$dev_exists" != "x" ]; then
1023                        actual_dev=$dev_swap
1024                        break;
1025                    fi
1026                done
1027            fi
1028
1029            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1030            # LABEL=SW-cciss/c0d0p3 (RDP)
1031            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1032            # SWAP only
1033            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1034                    skip=""
1035                    uname="`uname -r`"
1036                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1037                    # 2.6.12 needs 16 (FC3)
1038                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1039                    # 2.6.19 and upper needs 1052
1040                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1041                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1042                    if [ $skip = "" ]; then
1043                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1044                    fi
1045                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1046                    do
1047                        # Location of the swap label for kernel 2.6
1048                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1049                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1050                            actual_dev=$try_dev
1051                        fi
1052                    done
1053            fi
1054
1055            # Check if one of all those tries has known success
1056            if [ "x$actual_dev" != "x" ]; then
1057                current_partition=$actual_dev
1058            else
1059                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1060            fi
1061        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1062        # current_partition contains only first column of /etc/fstab
1063        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1064            uuid=`echo "$current_partition" | cut -d'=' -f2`
1065            actual_dev=""
1066
1067            # 1st try, findfs - the RHEL way of finding labels and their partitions
1068            if [ -x "/sbin/findfs" ]; then
1069                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1070            fi
1071   
1072            # 2nd try : blkid, the good way for all UUID except swap
1073            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1074                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1075                # For LVM FS it will give a /dev/dm-# which should then be converted
1076                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1077                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1078                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1079                    for dev in `ls /dev/mapper/*`; do
1080                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1081                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1082                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1083                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1084                            break
1085                        fi
1086                    done
1087                fi
1088            fi
1089   
1090            # 3th try, with vol_id
1091            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1092                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1093                for dev in $list_dev ; do
1094                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1095                    if [ "x$dev_exists" != "x" ]; then
1096                        actual_dev=$dev
1097                        break;
1098                    fi
1099                done
1100            fi
1101
1102            # 4th try, with dumpuuid (VMWare only ?) for swap
1103            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1104                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1105                for dev in $list_dev ; do
1106                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1107                    if [ "x$dev_exists" != "x" ]; then
1108                        actual_dev=$dev
1109                        break;
1110                    fi
1111                done
1112            fi
1113
1114            # Check if one of all those tries has known success
1115            if [ "x$actual_dev" != "x" ]; then
1116                current_partition=$actual_dev
1117            else
1118                Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1119            fi
1120        else
1121            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1122            # they use symlinks in fstab unrelated to what is shown in mount !
1123            if [ _"$partition_mountpt" = _"" ]; then
1124                # set default in case we dont't find it
1125                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1126                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1127                            str_to_find_fmt_with=$tmpp
1128                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1129                            break;
1130                        fi
1131                done
1132            fi
1133        fi
1134
1135        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1136        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1137        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1138        # the former is then a link to the latter, so we test whether
1139        # $current_partition is actually such a link or not and set
1140        # $current_lvolume accordingly. On Debian you may find more than one answer
1141        # so we remove the one corresponding to /dev/.static
1142        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1143        # principle is the same and we need to find the link to it as well.
1144        # Note that $current_lvolume may well be an
1145        # ordinary device. It is just to make sure that we feed the right value
1146        # into any of the LVM tools if possible.
1147
1148        current_lvolume="$current_partition"
1149        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1150            # .static dir are a Debian specificity
1151            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1152            echo $current_lvolume | grep -q ' '
1153            if [ $? -eq 0 ]; then
1154                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1155            fi
1156        fi
1157        #
1158        # End of LVM device style variation code (other than $current_lvolume).
1159
1160        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1161            # Size computed via LVM not directly
1162            partition_size="lvm"
1163        else
1164            partition_size=`SizeOfPartition $current_partition`
1165            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1166            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1167            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1168                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition" | $AWK '{print $3}'`
1169                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1170                [ "$partition_format" != "swap" ] && partition_format="swap"
1171                if [ "$partition_size" = "" ] ; then
1172                    totalsize=0
1173                    items=0
1174                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1175                        totalsize=$(($totalsize+$i))
1176                        items=$(($items+1))
1177                    done
1178                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1179                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1180                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1181                fi
1182            fi
1183        fi
1184        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1185        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1186        if [ "$partition_mountpt" = "" ] ; then
1187            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1188                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1189                    partition_mountpt="raid"
1190                    partition_format="raid"
1191                else
1192                    partition_mountpt="lvm"
1193                    partition_format="lvm"
1194                fi
1195            fi
1196        fi
1197        psz=$partition_size
1198        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1199        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1200        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1201            partition_mountpt="image"
1202            old_partition_fmt=$partition_format
1203            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1204            partition_size=$(($partition_size+1)); # just in case
1205            if [ "$partition_format" = "Linux" ] ; then
1206                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1207                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1208                partition_format=$old_partition_fmt
1209            fi
1210        fi
1211        if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | grep -F " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
1212            echo "Excluding $current_partition from mountlist" >> $LOGFILE
1213            continue
1214        fi
1215        if [ ! "$partition_mountpt" ] ; then
1216            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1217            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1218                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1219                [ "$partition_format" ] && break
1220            done
1221            echo "------- $FDISK log end ------------" >> $LOGFILE
1222            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1223                partition_format="compaq"
1224            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1225                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1226                continue
1227            fi
1228        fi
1229        if [ "$redhat_label" ]; then
1230            label="$redhat_label"
1231        elif [ "$uuid" ]; then
1232            label="$uuid"
1233        fi
1234        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1235        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1236        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1237        if [ "$current_partition" = "" ] ; then
1238            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1239        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1240            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1241                partition_mountpt=raid
1242                partition_format=raid
1243                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1244                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1245            else
1246                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1247            fi
1248        elif [ "$partition_format" = "" ] ; then
1249            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1250        elif [ "$partition_size" = "" ] ; then
1251            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1252        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1253            continue
1254        else
1255            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1256                echo "Stupid bastard..." >> $LOGFILE
1257                partition_format="vfat"
1258            fi
1259            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1260            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1261        fi
1262    done
1263}
1264
1265
1266MakeSureNumberIsInteger() {
1267    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1268    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1269    echo "result = '$res'"
1270        Die "$1 should be an integer"
1271    fi
1272}
1273
1274
1275OfferToMakeBootableISO() {
1276    local i old_pwd
1277    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1278        echo -en "Shall I make a bootable CD image? (y/[n]) "
1279        read i
1280        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1281    fi
1282    if [ _"$MINDI_TMP" = _"" ]; then
1283        Die "MINDI_TMP undefined"
1284    fi
1285    rm -Rf $MINDI_TMP/iso
1286    mkdir -p $MINDI_TMP/iso/{images,archives}
1287    cp -f $MINDI_CACHE/*.gz $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1288    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1289    for i in memdisk memtest.bin memtest.img ; do
1290        j=$MINDI_LIB/$i
1291        k=$MINDI_TMP/iso
1292        if [ -e "$j" ] ; then
1293            LogIt "Copying $j to $k"
1294            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1295            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1296            if [ _"$MONDO_SHARE" != _"" ]; then 
1297                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1298            fi
1299        fi
1300    done
1301    MakeMessageFile > $MINDI_TMP/iso/message.txt
1302    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1303    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1304    if [ _"$MONDO_SHARE" != _"" ]; then 
1305        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1306        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1307    fi
1308    MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
1309    if [ "$ARCH" != "ia64" ] ; then
1310        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1311    fi
1312    old_pwd=`pwd`
1313    cd $MINDI_TMP/iso
1314    if [ "$ARCH" != "ia64" ] ; then
1315        if [ _"$MONDO_SHARE" != _"" ]; then 
1316            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1317            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1318        fi
1319        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1320    else
1321        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1322        rm -f images/mindi-bootroot.$BOOT_SIZE.img
1323    fi
1324    if [ "$?" -ne "0" ] ; then
1325        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1326        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1327        echo "$ISO_CMD returned the following errors:-"
1328        cat $MINDI_TMP/mkisofs.log
1329        LogIt "Failed to create ISO image."
1330    else
1331        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1332    fi
1333    rm -f $MINDI_TMP/mkisofs.log
1334    cd $old_pwd
1335}
1336
1337
1338OfferToMakeBootableUSB() {
1339    local i old_pwd
1340    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1341        echo -n "Shall I make a bootable USB image ? (y/[n]) "
1342        read i
1343        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1344        if [ "$USBDEVICE" = "" ]; then
1345            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1346            read dev
1347            USBDEVICE=$dev
1348        fi
1349        echo "WARNING: This will erase all content on $USBDEVICE"
1350        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1351    fi
1352    if [ _"$MINDI_TMP" = _"" ]; then
1353        Die "MINDI_TMP undefined"
1354    fi
1355    rm -Rf $MINDI_TMP/usb
1356    mkdir -p $MINDI_TMP/usb
1357    USBPART="${USBDEVICE}1"
1358
1359    echo -en "Transforming $USBDEVICE in a Bootable device " 
1360    echo -en "."
1361    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1362    echo "Checking $USBDEVICE" >> $LOGFILE
1363    $FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1364    if [ $? -ne 0 ]; then
1365        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1366        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1367        exit -1
1368    fi
1369    echo -en "."
1370    echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1371    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1372    echo "Erasing $USBDEVICE" >> $LOGFILE
1373    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1374d
1375d
1376d
1377d
1378n
1379p
13801
1381
1382
1383t
1384b
1385a
13861
1387w
1388EOF
1389    if [ $? -ne 0 ]; then
1390        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1391        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1392        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1393        MindiExit -1
1394    fi
1395    echo -en "."
1396    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1397    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1398    if [ $? -ne 0 ]; then
1399        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1400        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1401        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1402        MindiExit -1
1403    fi
1404    echo -en "."
1405    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1406    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1407    if [ $? -ne 0 ]; then
1408        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1409        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1410        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1411        MindiExit -1
1412    fi
1413    echo -en "."
1414    mkdir -p $MINDI_TMP/usb/images
1415    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1416    echo -en "."
1417    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1418    for i in memdisk memtest.bin memtest.img ; do
1419        j=$MINDI_LIB/$i
1420        k=$MINDI_TMP/usb
1421        if [ -e "$j" ] ; then
1422            LogIt "Copying $j to $k"
1423            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1424            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1425        fi
1426    done
1427    echo -en "."
1428    MakeMessageFile > $MINDI_TMP/usb/message.txt
1429    echo -en "."
1430    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1431    echo -en "."
1432    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1433    echo -en "."
1434    MakeBootConfFile syslinux > syslinux.cfg
1435    echo -en "."
1436    umount $MINDI_TMP/usb
1437    if [ "$ARCH" != "ia64" ] ; then
1438        syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1439        if [ "$?" -ne "0" ] ; then
1440            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1441            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1442            LogIt "Failed to create USB image."
1443        else
1444            echo -e "$DONE"
1445            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1446        fi
1447        rm -f $MINDI_TMP/syslinux.log
1448    else
1449        echo "No USB boot support for ia64" | tee -a $LOGFILE
1450        MindiExit -1
1451    fi
1452    echo -en "."
1453}
1454
1455
1456MakeMessageFile() {
1457    iss="/dev/null"
1458    [ -e /etc/issue ] && iss="/etc/issue"
1459    [ -e /etc/issue.net ] && iss="/etc/issue.net"
1460    if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
1461        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1462    else
1463        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1464    fi
1465    if [ _"$MONDO_SHARE" != _"" ]; then
1466        if [ "$CDRECOVERY" != "yes" ] ; then
1467            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1468                echo -en "Press <enter> to continue.\n"
1469            elif [ ! "$MINDI_TMP" ] ; then
1470                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1471                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1472                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1473                fi
1474            else
1475                echo -en "$BOOT_MEDIA_MESSAGE"
1476            fi
1477        else
1478            echo -en "\
1479To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1480CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1481        fi
1482    fi
1483    echo -en "\n\n\n"
1484}
1485
1486
1487MakeBootConfFile() {
1488    local options i ooo
1489    options=""
1490    # Type of boot file (elilo or syslinux/isolinux)
1491    type=$1
1492    if [ "$type" = "elilo" ]; then
1493        sep="="
1494    else
1495        sep=" "
1496    fi
1497
1498    # Generic header for conf file
1499    if [ "$type" != "elilo" ] ; then
1500        echo -en "prompt 1\ndisplay message.txt\n"
1501    else
1502        echo -en "prompt\n"
1503    fi
1504
1505    # Compute which default option to boot from
1506    if [ "$CDRECOVERY" = "yes" ] ; then
1507        echo -en "default${sep}RESTORE\n"
1508    # In case it's mondoarchive
1509    elif [ _"$MONDO_SHARE" != _"" ]; then
1510        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1511            echo -en "default${sep}iso\n"
1512        else
1513            echo -en "default${sep}interactive\n"
1514        fi
1515    else
1516        echo -en "default${sep}expert\n"
1517    fi
1518
1519    # Handle timeout
1520    if [ "$CDRECOVERY" != "yes" ] ; then
1521        echo -en "timeout${sep}300\n"
1522    else
1523        echo -en "timeout${sep}10000\n"
1524    fi
1525    echo -en "\n"
1526
1527    # prepare which labels will be generted
1528    if [ "$CDRECOVERY" = "yes" ] ; then
1529        options="RESTORE expert"
1530    else
1531        if [ _"$MONDO_SHARE" != _"" ]; then
1532            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1533                options="iso"
1534            else
1535                options="interactive expert compare iso nuke isonuke"
1536            fi
1537        else
1538            options="expert"
1539        fi
1540    fi
1541
1542    # Generate rest of conf file
1543    for i in $options ; do
1544        ooo=$i
1545        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1546        if [ "$type" = "elilo" ]; then
1547            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
1548        else
1549            outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
1550        fi
1551        echo -en "$outstr"
1552    done
1553
1554    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1555        if [ "$type" = "elilo" ]; then
1556            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1557            echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
1558        else
1559            echo -en "label memtest\n\tkernel /memtest.bin\n"
1560            echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
1561        fi
1562    fi
1563}
1564
1565
1566PrepareBootDiskImage_LILO() {
1567    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1568    imagesdir=$MINDI_CACHE
1569    kernelpath=$1
1570
1571    retval=0
1572    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1573    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1574    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1575    echo -en "..."
1576    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1577    mountpoint=$MINDI_TMP/mountpoint.$$
1578    mkdir -p $mountpoint
1579    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1580    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1581    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1582    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1583    mkdir -p $mountpoint/etc
1584    liloconf=$mountpoint/elilo.conf
1585
1586    MakeBootConfFile elilo > $liloconf
1587
1588    # Copy it so that CD-ROM menu entry is satisfied
1589    mountefi=0
1590    df -T | grep /boot/efi | grep -q vfat
1591    if [ $? -ne 0 ]; then
1592        mount /boot/efi
1593        if [ $? -ne 0 ]; then
1594            echo "You have to mount your EFI partition when using mindi"
1595            MindiExit -1
1596        fi
1597        mountefi=1
1598    fi
1599    el=`find /boot/efi -name elilo.efi`
1600    cp $el $mountpoint
1601    cp $liloconf $mountpoint
1602    if [ $mountefi -eq 1 ]; then
1603        umount /boot/efi 2>&1 > /dev/null
1604    fi
1605
1606    echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1607    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1608    if [ "$?" -ne "0" ] ; then
1609        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1610        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1611        LogIt "Please unload some of your modules and try again."
1612        rm -f $MINDI_TMP/mtpt.$$
1613        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1614        retval=$(($retval+1))
1615    fi
1616    MakeMessageFile > $mountpoint/message.txt
1617
1618    mkdir -p $mountpoint/tmp
1619    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1620        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1621    fi
1622
1623    # copy the kernel across
1624    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1625    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1626    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1627    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1628    if [ "$?" -ne "0" ] ; then
1629        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1630        du -sk $mountpoint/* >> $LOGFILE
1631        echo "--- end of list of files ---" >> $LOGFILE
1632        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1633Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1634        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1635        cd $old_pwd
1636        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1637        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1638    #   losetup /dev/loop0 -d
1639        [ "$imagefile" != "" ] && rm -f $imagefile
1640        return 0
1641    fi
1642    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1643    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1644    echo "Free space left on image = $free_space KB" >> $LOGFILE
1645    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1646    # make it bootable
1647    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1648    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1649    if [ "$KERN_DISK_MADE" ] ; then
1650        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1651    fi
1652
1653    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1654    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1655    echo -en "..."
1656    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1657    if [ "$retval" -eq "0" ] ; then
1658        echo -en "...$DONE\n"
1659        if [ "$KERN_DISK_MADE" ] ; then
1660            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1661        fi
1662    else
1663        echo -en "...failed\n"
1664        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1665        [ "$imagefile" != "" ] && rm -f $imagefile
1666    fi
1667    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1668    return $retval
1669}
1670
1671
1672PrepareBootDiskImage_SYSLINUX() {
1673    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1674    imagesdir=$MINDI_CACHE
1675    kernelpath=$1
1676    do_boot_root_thingy=""
1677    local retval old_pwd
1678    retval=0
1679
1680    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1681    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1682    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1683    echo -en "..."
1684    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1685    mountpoint=$MINDI_TMP/mountpoint.$$
1686    mkdir -p $mountpoint
1687    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1688    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1689    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1690    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1691
1692    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1693
1694    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1695    MakeMessageFile > $mountpoint/message.txt
1696    MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
1697    echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1698    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1699    if [ "$?" -ne "0" ] ; then
1700        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1701        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1702        LogIt "Please unload some of your modules and try again."
1703        rm -f $MINDI_TMP/mtpt.$$
1704        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1705        retval=$(($retval+1))
1706    fi
1707
1708    mkdir -p $mountpoint/tmp
1709    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1710        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1711    fi
1712
1713    # copy the kernel across
1714    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1715    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1716    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1717    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1718    if [ "$?" -ne "0" ] ; then
1719        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1720        du -sk $mountpoint/* >> $LOGFILE
1721        echo "--- end of list of files ---" >> $LOGFILE
1722        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1723Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1724        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1725        cd $old_pwd
1726        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1727        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1728
1729        [ "$imagefile" != "" ] && rm -f $imagefile
1730        return 0
1731    fi
1732    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1733    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1734    echo "Free space left on image = $free_space KB" >> $LOGFILE
1735    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1736
1737    # make it bootable
1738    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1739    mkdir -p $mountpoint/etc
1740    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1741    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1742    echo -en "..."
1743    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1744
1745    if [ "$retval" -eq "0" ] ; then
1746        echo -en "...$DONE\n"
1747        if [ "$KERN_DISK_MADE" ] ; then
1748            [ "$imagefile" != "" ] && rm -f $imagefile
1749            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1750        fi
1751    else
1752        echo -en "...failed\n"
1753        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1754        [ "$imagefile" != "" ] && rm -f $imagefile
1755    fi
1756    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1757    return $retval
1758}
1759
1760
1761ParseModprobeForIncludes() {
1762local MODPROBE_CONF mpincfile includes include
1763
1764MODPROBE_CONF=/etc/modprobe.conf
1765mpincfile=$1
1766touch $mpincfile
1767if [ -a $MODPROBE_CONF ]; then
1768    includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort|uniq)
1769    if [ -n "$includes" ]; then
1770        for include in $includes
1771        do
1772            if [ -a "$include" ]; then
1773                echo $include >> $mpincfile
1774            fi
1775        done
1776    fi
1777fi
1778}
1779
1780
1781PrepareDataDiskImages() {
1782    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
1783
1784    imagesdir=$MINDI_CACHE
1785    rm -f $imagesdir/mindi.iso
1786    needlist=$MINDI_TMP/what-we-need.txt
1787    bigdir=$MINDI_TMP/bigdir
1788    mkdir -p $bigdir/usr/bin
1789    mkdir -p $bigdir/usr/sbin
1790    includefile=$MINDI_TMP/$$.includefile.txt
1791
1792    lfiles="$DEPLIST_FILE"
1793    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
1794    ParseModprobeForIncludes $includefile
1795    lines=$(($lines+`cat $includefile | wc -l`))
1796    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
1797    res=$?
1798    rm -f $includefile
1799    if [ "$YOUR_KERNEL_SUCKS" ]; then
1800        pwd=`pwd`
1801        cd $MINDI_TMP
1802        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
1803            tar cf - ./$i 2>> $LOGFILE | (cd $bigdir ; tar xf -) || Die "PDDI can't copy $i->$bigdir"
1804        done
1805        for i in $EXTRA_MODS ; do
1806            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1807            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1808            for k in $j ; do
1809                tar cf - $k 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1810                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1811            done
1812        done
1813        cd $pwd
1814    else
1815        ListKernelModulePaths >> $needlist
1816    fi
1817    if [ "$res" -ne "0" ] ; then
1818        Die "You have $res files present in dependency list\nbut absent from filesystem."
1819    fi
1820    FindAndAddUserKeyboardMappingFile
1821    mkdir -p $bigdir/tmp
1822    if [ _"$MONDO_SHARE" != _"" ]; then
1823        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1824        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1825    fi
1826    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1827    DropOptimizedLibraries $needlist $bigdir
1828    echo -en "Assembling dependency files"
1829    CopyDependenciesToDirectory < $needlist $bigdir
1830
1831    # also copy io.sys and msdos.sys, if we can find them
1832    for i in `mount | cut -d' ' -f3` ; do
1833        for j in io.sys msdos.sys ; do
1834            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
1835        done
1836    done
1837
1838    # master boot record, too
1839    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
1840    if [ "$i" ] ; then
1841        LogIt "Backing up $i's MBR"
1842        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
1843        sleep 1
1844        sync
1845        j=$i
1846        [ -h "$j" ] && j=`readlink -f $j`
1847        LogIt "Creating /dev/boot_device ($j)"
1848        mkdir -p $bigdir/dev
1849        cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null || Die "Unable to create /dev/boot_device on ramdisk"
1850    fi
1851
1852    old_pwd=`pwd`
1853    cd $bigdir
1854
1855    # Get terminfo content
1856    ti="usr/share/terminfo/l"
1857    if [ -d /$ti ]; then
1858        mkdir -p $ti
1859        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogIt "WARNING - error occurred while copying terminfo"
1860    fi
1861    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
1862        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
1863        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
1864    fi
1865    [ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE | tar xf -
1866    cd $old_pwd
1867    echo -e "$DONE"
1868    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
1869    MakeMountlist $MINDI_TMP/mountlist.txt
1870    mkdir -p $bigdir/tmp
1871    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
1872    if [ _"$MONDO_SHARE" != _"" ]; then
1873        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
1874    fi
1875    if [ $LVM != "false" ]; then
1876        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
1877        if [ "$?" -ne "0" ]; then
1878            LVM="false"
1879            rm -f $bigdir/tmp/i-want-my-lvm
1880        fi
1881    fi
1882    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
1883    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
1884    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
1885    if [ _"$MONDO_SHARE" != _"" ]; then
1886        for q in filelist.full.gz biggielist.txt ; do
1887            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
1888            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
1889        done
1890    fi
1891
1892    echo -en "Tarring and zipping the data content..."
1893    size_of_all_tools=`du -sk $bigdir | cut -f1`
1894    (cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null | gzip -9 > $imagesdir/all.tar.gz)
1895    du -sk $imagesdir/*gz >> $LOGFILE
1896    echo -e "$DONE"
1897
1898    FRIENDLY_OUTSTRING="Boot and data disk images were created."
1899    rm -rf $bigdir
1900    rm -f $needlist
1901}
1902
1903
1904ProcessLDD() {
1905    local incoming f d nd bd bnd
1906    read incoming
1907    while [ "$incoming" != "" ]; do
1908        # We take the full path name of the dyn. lib. we want
1909        incoming=`echo "$incoming" | awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
1910        for f in $incoming ; do
1911            # echo modified file name if one of the parent dir is a link
1912            # by replacing the original dirname by the destination of the link
1913            d="`dirname $f`"
1914            found="false"
1915            while [ "$d" != "/" ]; do
1916                if [ -h "$d" ]; then
1917                    nd=`readlink -f $d`
1918                    bd=`basename $d`
1919                    bnd=`basename $nd`
1920                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
1921                    echo $d
1922                fi
1923                d="`dirname $d`"
1924            done
1925
1926            echo "$f"
1927            echo "`ReadAllLink $f`"
1928        done
1929        read incoming
1930    done
1931}
1932
1933
1934Prompt() {
1935    echo -en "$1"
1936    read line
1937}
1938
1939
1940ReadLine() {
1941    local i incoming
1942    read incoming
1943    i=0
1944    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
1945        i=$(($i+1))
1946        read incoming
1947    done
1948    echo "$incoming"
1949}
1950
1951
1952SizeOfPartition() {
1953    local devpath drive res stub
1954    device=$1
1955    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
1956        res=`SizeOfRaidPartition $device`
1957        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
1958        echo "$res"
1959        return 0
1960    fi
1961    # patch from Bill <bill@iwizard.biz> - 2003/08/25
1962    res=`$FDISK -s $device 2>> $LOGFILE`
1963    # end patch
1964    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2`
1965    [ "$res" = "" ] && res="-1"
1966    echo $res
1967    return 0
1968}
1969
1970
1971SizeOfRaidPartition() {
1972    local real_dev smallest_size silly tmp
1973
1974    silly=999999999
1975    smallest_size=$silly
1976
1977    for real_dev in `GetRaidDevMembers $1` ; do
1978        tmp=`SizeOfPartition $real_dev`
1979        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
1980    done
1981
1982    if [ "$smallest_size" = "$silly" ] ; then
1983        echo "-1"
1984        return 1
1985    else
1986        echo "$smallest_size"
1987        return 0
1988    fi
1989}
1990
1991
1992StripComments()
1993{
1994    local tempfile
1995
1996    tempfile=$MINDI_TMP/$$.strip.txt
1997    cp -f $1 $tempfile 2>> $LOGFILE
1998    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
1999    rm -f $tempfile
2000    echo "Stripped comments from $2" >> $LOGFILE
2001}
2002
2003
2004
2005StripExecutable()
2006{
2007    local tmpfile
2008
2009    tmpfile=$MINDI_TMP/stripped.$$.dat
2010    [ -d "$1" ] || [ -h "$1" ] && return
2011    cp -f $1 $tmpfile 2>> $LOGFILE
2012    strip $tmpfile 2> /dev/null
2013    if [ "$?" -eq "0" ] ; then
2014        cp -f $tmpfile $1 2>> $LOGFILE
2015        echo "Stripped binary $2" >> $LOGFILE
2016    fi
2017    rm -f $tmpfile
2018}
2019
2020
2021TryToFindKernelPath() {
2022    local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2023
2024    we_want_version=`uname -r`
2025    possible_kernels=""
2026    duff_kernels=""
2027   
2028    if [ "$ARCH" = "ia64" ] ; then
2029       root="/boot/efi/efi"
2030    else
2031       root="/"
2032    fi
2033    for fname in `find $root -maxdepth 2 -type f | grep -E 'lin|kern' | grep -Ev '^/proc/|^/net/'` ; do
2034        [ ! -e "$fname" ] && continue
2035        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2036        file $fname | grep -q gzip
2037        if [ "$?" -eq "0" ] ; then
2038            # Used by ia64
2039            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2040        else
2041            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2042        fi
2043        [ "$fkern_ver" = "" ] && continue
2044        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2045        [ -f "$fname" ] || continue
2046        [ -h "$fname" ] && continue
2047        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2048        file $fname | grep -q gzip
2049        if [ "$?" -eq "0" ] ; then
2050            # Used by ia64
2051            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2052                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2053                duff_kernels="$fname $duff_kernels"
2054            else
2055                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2056                possible_kernels="$fname $possible_kernels"
2057            fi
2058        else
2059            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2060                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2061                duff_kernels="$fname $duff_kernels"
2062            else
2063                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2064                possible_kernels="$fname $possible_kernels"
2065            fi
2066        fi
2067    done
2068    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2069        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2070    fi
2071    if [ ! "$possible_kernels" ] ; then
2072        LogIt "No kernel matches exactly. Are there any duff kernels?"
2073        possible_kernels="$duff_kernels"
2074        if [ ! "$possible_kernels" ] ; then
2075            LogIt "Sorry, no duff kernels either"
2076        else
2077            LogIt "I bet you're running Debian or Gentoo, aren't you?"
2078            LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2079        fi
2080    fi
2081    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort -u | tr '\n' ' '`
2082    noof_kernels=`CountItemsIn "$possible_kernels"`
2083    if [ "$noof_kernels" -eq "0" ] ; then
2084        LogIt "Could not find your kernel."
2085        if [ -e "/boot/vmlinuz" ] ; then
2086            LogIt "Using /boot/vmlinuz as a last resort."
2087            output=/boot/vmlinuz
2088        else
2089            output=""
2090        fi
2091    elif [ "$noof_kernels" -eq "1" ] ; then
2092        kernelpath=`echo "$possible_kernels" | sed s/' '//`
2093        echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2094        output="$kernelpath"
2095    else
2096        for i in $possible_kernels ; do
2097            if echo $i | grep "`uname -r`" ; then
2098                LogIt "OK, I used my initiative and found that "
2099                LogIt "$i is probably your kernel. "
2100                output="$i"
2101                return
2102            fi
2103        done
2104        if echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null ; then
2105            output=/boot/vmlinuz
2106            echo "Schlomo, this one's for you." >> $LOGFILE
2107        else
2108            LogIt "Two or more possible kernels found. You may specify any one of them and the "
2109            LogIt "boot disks will still work, probably. If one does not work, try another."
2110            LogIt "$possible_kernels"
2111            echo ""
2112        fi
2113    fi
2114    echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
2115}
2116
2117
2118TurnTgzIntoRdz() {
2119    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2120
2121    tgz_dir_fname=$1
2122    rdz_fname=$2
2123    kernelsize=$3
2124    maxsize=$(($BOOT_SIZE-$kernelsize))
2125    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2126    tempfile=$MINDI_TMP/temp.rd
2127    mountpoint=$MINDI_TMP/mnt1
2128    res=0
2129    echo -en "..."
2130    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2131    echo -en "..."
2132    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2133    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2134    echo -en "..."
2135    mkdir -p $mountpoint
2136    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2137    echo -en "..."
2138    old_pwd=`pwd`
2139    cd $mountpoint
2140
2141    # AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2142    [ -h "/lib64" ] && (mkdir -p lib ; ln -s lib lib64) || LogIt "/lib64 is a symbolic link, but I couldn't create in $mountpoint."
2143
2144    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2145    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2146
2147    cd dev || Die "Can't cd to dev"
2148    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2149    rm -f dev-entries.tgz
2150    cd ..
2151
2152    for w in insmod.static insmod.static.old ; do
2153        s=`which $w 2> /dev/null`
2154        if [ -e "$s" ] ; then
2155            tar cf - $s 2> /dev/null | tar xf -
2156        fi
2157    done
2158
2159    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2160
2161    # Handle the case where busybox and mount are dynamically linked
2162    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2163    if [ $? -eq 0 ]; then
2164        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2165        rm -f bin/mount $MINDI_TMP/busy.lis
2166        mountlis=`grep mount $DEPLIST_FILE`
2167        for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2168            if [ -f $f ]; then
2169                LocateDeps $f >> $MINDI_TMP/busy.lis
2170            fi
2171        done
2172        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null | tar xf -
2173        rm -f $MINDI_TMP/busy.lis
2174    fi
2175
2176    # Copy of files mandatory for ld.so
2177    cp /etc/ld.so.c* $mountpoint/etc
2178
2179    mkdir -p $mountpoint/tmp
2180    # Management of udev (which includes modprobe in rules)
2181    ps auxww | grep -v grep | grep -qw udevd
2182    if [ $? -eq 0 ]; then
2183        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2184        LogIt "udev device manager found"
2185        tar cf - /etc/udev 2> /dev/null | tar xf -
2186        # This avoids NIC remapping if on another machine at restore time on Debian at least
2187        rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2188        tar cf - /lib*/udev 2> /dev/null | tar xf -
2189        if [ -x /sbin/udevd ]; then
2190            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2191            lis=""
2192            # Get only the files which exist in that list
2193            # and potentially their symlink structure
2194            for i in $lis2; do
2195                if [ -h $i ]; then
2196                    j=$i
2197                    while [ -h $j ]; do
2198                        lis="$lis $j"
2199                        j=`readlink $j`
2200                    done
2201                    lis="$lis $j"
2202                elif [ -f $i ]; then
2203                    lis="$lis $i"
2204                fi
2205            done
2206            # And their deps
2207            LocateDeps $lis > $MINDI_TMP/udev.lis
2208            for i in $lis; do
2209                if [ "`echo $i | cut -c1`" = "/" ]; then
2210                    j=`echo $i | cut -c2-`
2211                    [ "$j" != "" ] && rm -f $j
2212                fi
2213            done
2214            tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null | tar xf -
2215            rm -f $MINDI_TMP/udev.lis
2216        else
2217            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2218            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2219            rm -f $mountpoint/tmp/USE-UDEV
2220        fi
2221    fi
2222
2223    # Management of potential HW info (Proliant only at the moment)
2224    rm -rf $MINDI_CACHE/bkphw
2225    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2226    if [ -d $MINDI_CACHE/bkphw ]; then
2227        LogIt "Hardware Information found and saved ..."
2228        cp -rp $MINDI_CACHE/bkphw .
2229        if [ -f $MINDI_CACHE/tools.files ]; then
2230            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2231            LocateDeps $lis > $MINDI_TMP/tools.lis
2232            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null | tar xf -
2233        fi
2234        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2235            mv -f $MINDI_CACHE/mindi-rsthw .
2236            chmod 755 ./mindi-rsthw
2237        fi
2238        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2239    fi
2240
2241    for w in cdrom groovy-stuff ; do
2242        mkdir -p mnt/$w
2243    done
2244
2245    tar cf - /dev/fd0*[1,2][4,7,8]* 2> /dev/null | tar xf -
2246
2247    cd $old_pwd
2248    echo -en "..."
2249    old_pwd=`pwd`
2250    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2251        cd $MINDI_TMP
2252        needed_modules_path=lib/modules/$FAILSAFE_KVER
2253    else
2254        cd /
2255        if [ "${kernelname}" != "" ]
2256        then
2257            needed_modules_path=lib/modules/${kernelname}
2258        else
2259            needed_modules_path=lib/modules/`uname -r`
2260        fi
2261    fi
2262
2263    needed_modules=""
2264    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2265
2266    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2267        # For PXE boot
2268        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2269    fi
2270    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2271        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2272    fi
2273    for i in $DENY_MODS; do
2274        echo "Removing $i from the list of modules to load" >> $LOGFILE
2275        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2276    done
2277
2278    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2279    for i in $list_of_groovy_mods ; do
2280        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2281    done
2282
2283    for i in $needed_modules ; do
2284        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2285        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2286        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2287        tar cf - $i 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy $i to $mountpoint"
2288        # Uncompress modules if not using udev and native modprobe
2289        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2290            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2291                echo "Uncompressing $i" >> $LOGFILE
2292                gunzip -f $mountpoint/$i
2293            fi
2294        fi
2295    done
2296
2297    # Also copy modules.dep in case of udev so that normal modprobe works
2298    tar cf - /$needed_modules_path/modules.dep 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint"
2299
2300    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2301        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2302        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2303        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2304        rm -f $mountpoint/sbin/devfsd
2305    fi
2306    cd $old_pwd
2307    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2308    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2309    rm -f $mountpoint/zero
2310    if [ _"$MONDO_SHARE" != _"" ]; then
2311        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2312        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2313        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null || Die "Cannot copy mountlist to ramdisk"
2314        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2315        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2316        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2317        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2318        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2319        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2320    fi
2321    mkdir -p $mountpoint/proc
2322    echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2323    # Determine what filesystem to use for initrd image
2324    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2325    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2326    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2327    case "$gvFileSystem" in
2328    "ext2fs")
2329        # say what will be used
2330        echo "Creating an ext2 initrd image..." >> $LOGFILE
2331        # kernel expects linuxrc in ext2 filesystem
2332        ( cd $mountpoint && ln -sf sbin/init linuxrc )
2333        # unmount loop filesystem and create image file using the standard approach
2334        umount $mountpoint || Die "Cannot unmount $tempfile"
2335        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2336        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2337        ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2338        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2339        rm -f ${rdz_fname}.tmp
2340        # log that we are done
2341        echo "...done." >> $LOGFILE
2342    ;;
2343    "initramfs")
2344        # say what will be used
2345        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2346        # make sure that cpio is there
2347        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2348        # go into filesystem
2349        cd $mountpoint
2350        # kernel expects init in cpio filesystem
2351        ln -sf sbin/init init
2352        # create cpio image file and unmount loop filesystem
2353        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2354        cd $old_pwd
2355        umount $mountpoint || Die "Cannot unmount $tempfile"
2356        # log that we are done
2357        echo "...done." >> $LOGFILE
2358    ;;
2359    *)
2360        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2361    ;;
2362    esac
2363    if [ "$res" -eq "0" ] ; then
2364        echo -en "..."
2365    else
2366        echo -en "\rMade an rdz WITH ERRORS.           \n"
2367    fi
2368    return 0
2369}
2370
2371
2372##############################################################################
2373#----------------------------------- Main -----------------------------------#
2374##############################################################################
2375
2376# Now we can create what we need
2377mkdir -p $MINDI_TMP
2378
2379# Purge from potential old run
2380if [ _"$MINDI_CACHE" = _"" ]; then
2381    Die "MINDI_CACHE undefined"
2382fi
2383rm -rf $MINDI_CACHE/* 2> /dev/null
2384mkdir -p $MINDI_CACHE
2385
2386if [ "$1" = "--printvar" ] ; then
2387    shift
2388    if [ _"$1" != _"" ] ; then
2389        set | grep -Ew "^$1" | cut -d= -f2
2390    fi
2391    MindiExit 0
2392fi
2393
2394> $LOGFILE
2395echo "mindi v$MINDI_VERSION" >> $LOGFILE
2396echo "$ARCH architecture detected" >> $LOGFILE
2397echo "mindi called with the following arguments:" >> $LOGFILE
2398echo "$@" >> $LOGFILE
2399echo "Start date : `date`" >> $LOGFILE
2400echo "-----------------------------" >> $LOGFILE
2401
2402[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2403
2404# Log some capital variables
2405[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2406echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2407echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2408echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2409[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2410echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2411if [ -f $MINDI_CONFIG ]; then
2412    echo "-----------------------------" >> $LOGFILE
2413    echo " Mindi configuration file    " >> $LOGFILE
2414    echo "-----------------------------" >> $LOGFILE
2415    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2416    echo "-----------------------------" >> $LOGFILE
2417fi
2418
2419
2420trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2421
2422# Sanity checks
2423which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2424which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2425which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2426which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2427if which awk &> /dev/null ; then
2428    if ! which gawk &> /dev/null ; then
2429        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2430    fi
2431fi
2432which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2433[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2434
2435[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2436
2437# Update the PATH variable if incomplete
2438if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2439    PATH=$PATH:/sbin:/usr/sbin
2440    export PATH
2441    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2442    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2443    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2444fi
2445
2446# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2447if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2448    source $MINDI_LIB/FindDistroFailsafe
2449    # Log kernel image
2450    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2451else
2452    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2453fi
2454
2455if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2456    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2457fi
2458
2459### BERLIOS
2460### Fix as it's not mandatory on ia64
2461if [ "$ARCH" = "ia64" ] ; then
2462    if which elilo &> /dev/null ; then
2463        LILO_EXE=elilo
2464    else
2465        LILO_EXE=`which false 2> /dev/null`
2466    fi
2467else
2468    FindIsolinuxBinary
2469fi
2470trap "Aborted" SIGTERM
2471DONE="\r\t\t\t\t\t\t\t\tDone.         "
2472kernelpath=""
2473MONDO_ROOT=/var/cache/mondo
2474mkdir -p $MONDO_ROOT
2475
2476if [ -d "/proc/lvm" ]; then
2477    # LVM v1
2478    LVMCMD=""
2479    LVM="v1"
2480elif [ -d "/dev/mapper" ]; then
2481    # LVM v2
2482    LVMCMD="lvm"
2483    LVM="v2"
2484else
2485    LVM="false"
2486fi
2487echo "LVM set to $LVM" >> $LOGFILE
2488echo "----------" >> $LOGFILE
2489echo "mount result:" >> $LOGFILE
2490echo "-------------" >> $LOGFILE
2491mount >> $LOGFILE
2492echo "-------------" >> $LOGFILE
2493if [ -e /etc/raidtab ]; then
2494    echo "-------------" >> $LOGFILE
2495    echo "/etc/raidtab content:" >> $LOGFILE
2496    echo "-------------" >> $LOGFILE
2497    cat /etc/raidtab >> $LOGFILE
2498fi
2499echo "-------------" >> $LOGFILE
2500echo "cat /proc/cmdline:" >> $LOGFILE
2501echo "-------------" >> $LOGFILE
2502cat /proc/cmdline >> $LOGFILE
2503echo "-------------" >> $LOGFILE
2504echo "cat /proc/swaps:" >> $LOGFILE
2505echo "-------------" >> $LOGFILE
2506cat /proc/swaps >> $LOGFILE
2507echo "-------------" >> $LOGFILE
2508echo "cat /proc/partitions:" >> $LOGFILE
2509echo "-------------" >> $LOGFILE
2510cat /proc/partitions >> $LOGFILE
2511echo "-------------" >> $LOGFILE
2512echo "cat /proc/filesystems:" >> $LOGFILE
2513echo "-------------" >> $LOGFILE
2514cat /proc/filesystems >> $LOGFILE
2515echo "-------------" >> $LOGFILE
2516echo "lsmod result:" >> $LOGFILE
2517echo "-------------" >> $LOGFILE
2518lsmod >> $LOGFILE
2519MODULES="`cat /proc/modules | awk '{print $1}'`"
2520if [ -x /usr/sbin/esxcfg-module ]; then
2521    echo "-------------" >> $LOGFILE
2522    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2523    echo "-------------" >> $LOGFILE
2524    echo "VMWare modules" >> $LOGFILE
2525    echo "-------------" >> $LOGFILE
2526    /usr/sbin/esxcfg-module -l >> $LOGFILE
2527    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | awk '{print $1}'`"
2528fi
2529echo "FORCE_MODS:" >> $LOGFILE
2530echo "-------------" >> $LOGFILE
2531echo $FORCE_MODS >> $LOGFILE
2532echo "-------------" >> $LOGFILE
2533echo "DENY_MODS:" >> $LOGFILE
2534echo "-------------" >> $LOGFILE
2535echo $DENY_MODS >> $LOGFILE
2536echo "-------------" >> $LOGFILE
2537echo "df result:" >> $LOGFILE
2538echo "----------" >> $LOGFILE
2539df -T >> $LOGFILE
2540echo "-------------" >> $LOGFILE
2541echo "Liste of extra modules is:" >> $LOGFILE
2542echo "$EXTRA_MODS" >> $LOGFILE
2543echo "-------------" >> $LOGFILE
2544
2545# Compute libata version
2546laver=`modinfo libata | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2547# If libata v2 is used then remove ide-generic as it will perturbate boot
2548if [ "`echo $MODULES | grep libata`" ]; then
2549    if [ "$laver" = "2" ]; then
2550        DENY_MODS="$DENY_MODS ide-generic"
2551        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2552        echo "-------------" >> $LOGFILE
2553    fi
2554fi
2555
2556FLOPPY_WAS_MOUNTED=""
2557for mtpt in /media/floppy /mnt/floppy /floppy ; do
2558    if mount | grep -w $mtpt &> /dev/null ; then
2559        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2560        umount $mtpt
2561    fi
2562done
2563
2564#
2565# If we have a USB device we need to store info
2566# and remove it from the parameters line
2567#
2568if [ "$#" -ne "0" ] ; then
2569    if [ "$1" = "--usb" ] ; then
2570        shift
2571        USBDEVICE=$1
2572        if [ _"$USBDEVICE" = _"" ]; then
2573            Die "No USB device specified"
2574        fi
2575        shift
2576    fi
2577fi
2578
2579if [ "$#" -ne "0" ] ; then
2580    if [ "$1" = "--findkernel" ] ; then
2581        res=`TryToFindKernelPath`
2582        # Avoids logfile content for mondo
2583        export MONDO_SHARE=""
2584        if [ "$res" = "" ] ; then
2585            MindiExit -1
2586        else
2587            echo "$res"
2588            MindiExit 0
2589        fi
2590    elif [ "$1" = "--locatedeps" ] ; then
2591        [ ! "$2" ] && Die "Please specify the binary to look at"
2592        LocateDeps $2
2593        # Avoids logfile content for mondo
2594        export MONDO_SHARE=""
2595        MindiExit $?
2596    elif [ "$1" = "--readalllink" ] ; then
2597        [ ! "$2" ] && Die "Please specify the binary to look at"
2598        ReadAllLink $2
2599        # Avoids logfile content for mondo
2600        export MONDO_SHARE=""
2601        MindiExit $?
2602    elif [ "$1" = "--makemountlist" ] ; then
2603        [ ! "$2" ] && Die "Please specify the output file"
2604        MakeMountlist $2
2605        # Avoids logfile content for mondo
2606        export MONDO_SHARE=""
2607        MindiExit $?
2608    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2609        echo "Mindi v$MINDI_VERSION"
2610        # Avoids logfile content for mondo
2611        export MONDO_SHARE=""
2612        MindiExit 0
2613    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2614        MONDO_TMP=$2
2615        # Change MINDI_TMP for the one provided by mondo
2616        # So that it can get back the built files
2617        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2618        rmdir $MINDI_TMP
2619        export MINDI_TMP=$MONDO_TMP
2620        mkdir -p $MINDI_TMP
2621        # This is the scratch dir in mondo - subdir images
2622        MINDI_CACHE=$3
2623        if [ _"$MINDI_CACHE" != _"" ]; then
2624            mkdir -p $MINDI_CACHE
2625        fi
2626        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2627###
2628### Sq-Modification...
2629### Attempt to locate kernel specific module path
2630### if module path is found then use it other wise use uname -r to set it...
2631###
2632        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2633        LogIt "kernelname = $kernelname"
2634        LogIt "kernelpath = $kernelpath"
2635        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2636        then
2637           LogIt "Module path for ${kernelpath} not found..."
2638           LogIt "using running kernel\'s modules."
2639           kernelname=`uname -r`
2640        else
2641           LogIt "Using modules for kernel: ${kernelname}"
2642        fi
2643###
2644### end of Sq-Modification
2645###
2646        TAPEDEV=$5
2647        TAPESIZE=$6
2648        FILES_IN_FILELIST=$7
2649        USE_LZO=$8
2650        CDRECOVERY=$9
2651        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
2652            IMAGE_DEVS=""
2653        else
2654            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
2655        fi
2656        if [ "${11}" ] ; then
2657            LILO_OPTIONS=""
2658    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2659        fi
2660        LAST_FILELIST_NUMBER=${12}
2661        ESTIMATED_TOTAL_NOOF_SLICES=${13}
2662        EXCLUDE_DEVS="${14}"
2663        USE_COMP="${15}"
2664        USE_LILO="${16}"
2665        USE_STAR="${17}"
2666        INTERNAL_TAPE_BLOCK_SIZE="${18}"
2667        DIFFERENTIAL="${19}"
2668        USE_GZIP="${20}"
2669        NOT_BOOT="${21}"
2670        [ "$USE_COMP" = "" ] && USE_COMP=yes
2671        [ "$USE_GZIP" = "" ] && USE_GZIP=no
2672        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2673        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2674        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2675        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2676        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2677        then
2678           LogIt "Module path for ${kernelpath} not found..."
2679           LogIt "using running kernel\'s modules."
2680           kernelname=`uname -r`
2681        else
2682           LogIt "Using modules for kernel: ${kernelname}"
2683        fi
2684        [ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2685        # MONDO_ROOT is the real scratchdir
2686        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
2687        if [ _"$MONDO_ROOT" != _"" ]; then
2688            mkdir -p $MONDO_ROOT
2689        else
2690            Die "MONDO_ROOT is undefined"
2691        fi
2692    else
2693        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2694        MindiExit -1
2695    fi
2696fi
2697[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
2698
2699if [ _"$MONDO_SHARE" = _"" ]; then
2700    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2701    LogIt "Latest Mindi is available from http://www.mondorescue.org"
2702    LogIt "BusyBox sources are available from http://www.busybox.net"
2703    LogIt "------------------------------------------------------------------------------"
2704else
2705    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2706fi
2707if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2708    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
2709else
2710    LogIt "Unable to find mindi-busybox, please install it"
2711    MindiExit -1
2712fi
2713
2714# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2715insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2716for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2717    insmod $i >> $LOGFILE 2>> $LOGFILE
2718done
2719
2720KERN_DISK_MADE=""
2721
2722echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2723echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2724echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2725if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2726    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2727    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2728    MakeMountlist $MINDI_TMP/mountlist.txt
2729    mkdir -p $MINDI_TMP/small-all/tmp
2730    cd $MINDI_TMP/small-all
2731    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null || Die "Cannot copy small all.tar.gz"
2732    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
2733    sleep 2
2734    LogIt "Done. Exiting."
2735    MindiExit 0
2736fi
2737
2738if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2739    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2740fi
2741
2742if [ "$kernelpath" = "" ] ; then
2743    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2744    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2745    read ch
2746    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2747        USE_OWN_KERNEL="yes"
2748    else
2749        USE_OWN_KERNEL="no"
2750    fi
2751    if [ "$USE_OWN_KERNEL" = "yes" ]; then
2752        YOUR_KERNEL_SUCKS=""
2753        kernelpath=`TryToFindKernelPath`
2754        if [ "$kernelpath" = "" ] ; then
2755            echo -n "Please enter kernel path : "
2756            read kernelpath
2757        fi
2758    else
2759        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2760    fi
2761fi
2762if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
2763    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2764    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2765        source $MINDI_LIB/FindDistroFailsafe
2766        # Log kernel image
2767        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2768        kernelpath="$FAILSAFE_KBIN"
2769        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2770        LogIt "The failsafe kernel is $kernelpath.\n"
2771        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2772        LogIt "disks then it may still be a result of a problem with your kernel.\n"
2773        pwd=`pwd`
2774        cd $MINDI_TMP
2775        mkdir -p lib/modules
2776        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
2777        cd $pwd
2778    else
2779        kernelpath=$MINDI_LIB/vmlinuz
2780        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2781        LogIt "However, you are still running your kernel. If Mindi fails to create your"
2782        LogIt "disks then it may still be a result of a problem with your kernel."
2783        pwd=`pwd`
2784        cd $MINDI_TMP
2785        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
2786        cd $pwd
2787    fi
2788    YOUR_KERNEL_SUCKS="Your kernel sucks"
2789fi
2790echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
2791[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
2792
2793[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
2794
2795PrepareDataDiskImages
2796
2797ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2798rds=$(($ramdisk_size-$((ramdisk_size%4096))))
2799export ramdisk_size=$rds
2800
2801echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
2802if [ "$ARCH" = "ia64" ] ; then
2803    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
2804else
2805    PrepareBootDiskImage_SYSLINUX $kernelpath || Die "Failed to create $ramdisk_size MB disk image."
2806fi
2807
2808[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
2809...Or type 'memtest' to test your PC's RAM thoroughly.\n"
2810
2811if [ _"$MONDO_SHARE" = _"" ]; then
2812    ListImagesForUser
2813    OfferToMakeBootableISO
2814    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
2815        OfferToMakeBootableUSB
2816    fi
2817    LogIt "Finished."
2818elif [ "$TAPEDEV" ] ; then
2819    rm -f $MINDI_CACHE/{*img,*iso}
2820    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2821        OfferToMakeBootableUSB
2822    fi
2823    OfferToMakeBootableISO
2824    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
2825        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
2826    else
2827        Die "Cannot find all.tar.gz, to be written to tape"
2828    fi
2829elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2830    OfferToMakeBootableUSB
2831else
2832    OfferToMakeBootableISO
2833fi
2834# cleanup
2835LogIt "$FRIENDLY_OUTSTRING"
2836for mtpt in $FLOPPY_WAS_MOUNTED ; do
2837    mount $mtpt
2838done
2839MindiExit 0
Note: See TracBrowser for help on using the repository browser.