Context Navigation

source: MondoRescue/branches/2.2.7/mindi/mindi@ 2038

Visit:

Last change on this file since 2038 was 2038, checked in by Bruno Cornec, 16 years ago
Remove useless copy in a lilo.conf file on ia64
Property svn:keywords set to `Rev Id`
File size: 100.4 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 2038 2008-10-06 22:12:19Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[747]	17
[1511]	18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
[747]	19
[1691]	20	MINDI_REV=PBREV
	21	MINDI_VER=PBVER
[747]	22
	23	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	24	MINDI_PREFIX=XXX
	25	MINDI_CONF=YYY
	26	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	27	MINDI_LIB=LLL
[747]	28
[925]	29	# Temporary directory for mindi
	30	TMPDIR=/tmp
	31
[1914]	32	EXTRA_SPACE=49152 # increase if you run out of ramdisk space
[1821]	33	BOOT_SIZE=16384 # size of the boot disk
[747]	34
	35	PROMPT_MAKE_CD_IMAGE="yes"
	36	# Ask if you want to make a CD Image to be written?
	37	# if this is set to 'no', then the image will be created automatically
	38
[1684]	39	PROMPT_MAKE_USB_IMAGE="yes"
	40	# Ask if you want to make a USB Image to be written?
	41	# if this is set to 'no', then the image will be created automatically
	42
[966]	43	USE_OWN_KERNEL="yes"
[747]	44	# If set to "no", you will be prompted for whether or not
	45	# you want to use your own kernel, or the supplied default.
	46	# If "yes" mindi will automatically use your own kernel.
[925]	47
[747]	48	MY_FSTAB=/etc/fstab
	49	TAPE_MODS="ht st osst ide-tape ide_tape"
[2028]	50	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
[747]	51
	52	# ide-probe-mod
[2033]	53	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
[747]	54	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[1927]	55	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
[2000]	56	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
[1993]	57	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
	58	# Those modules will only go on the backup media, not the boot media.
[1258]	59	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
[1230]	60	# Replace with that line for HP OCMP e.g.
[1828]	61	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
	62	DENY_MODS="kqemu"
[1399]	63	# Force some modules to be included
[1354]	64	FORCE_MODS=""
[925]	65
[747]	66	LOGFILE=/var/log/mindi.log
[1880]	67	MINDI_CACHE=/var/cache/mindi
[747]	68	BOOT_MEDIA_MESSAGE="\
	69	To format and restore all files automatically, type 'nuke' <enter>.\n\
	70	To restore some/all files interactively, type 'interactive' <enter>.\n\
	71	To compare the archives with your filesystem, type 'compare' <enter>.\n\
	72	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
	73	You may add one or more of the following parameters as well:-\n\n\
	74	donteject - mondorestore will not eject the CD; this is useful if, for\n\
	75	instance, your PC's case has a concealed CD-ROM drive\n\
	76	noresize - your mountlist will not be adjusted to use your unallocated\n\
	77	hard disk space\n\
	78	textonly - do not call any Newt library routines; this is unattractive\n\
	79	but valuable if you find your Newt library has bugs in it\n\n\
	80	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
	81	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
	82	"
[925]	83	FDISK=$MINDI_SBIN/parted2fdisk
[747]	84
[925]	85	# Using a config file allow to overwrite some values
	86	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	87	if [ -f $MINDI_CONFIG ]; then
	88	. $MINDI_CONFIG
	89	fi
[1885]	90	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
	91	ISO_CMD="/usr/bin/mkisofs"
	92	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
[925]	93
[1485]	94	# Now we can create what we need
[1486]	95	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
[940]	96
[747]	97	# ----------------------------------------------------------------------------
	98
	99
	100	AbortHere() {
	101	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
	102	Die "Program is terminating in response to signal received from OS/user"
	103	}
	104
	105
	106	Aborted() {
	107	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	108	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	109	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
	110	Die "User abort."
	111	}
	112
	113
	114	AddFileToCfgIfExists() {
	115	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	116	}
	117
	118
	119	AddKeyboardMappingFile() {
	120	local mappath r included_list included_item i res ii sss
	121	mappath=$1
	122	KBDEPTH=$(($KBDEPTH+1))
	123	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	124	if [ -e "$bigdir/$mappath" ] ; then
	125	echo "$mappath already added" >> $LOGFILE
	126	return
	127	elif [ -d "$bigdir/$mappath" ] ; then
	128	echo "Cannot add $mappath: it's a directory. Sorry."
	129	return
	130	fi
	131	echo "Added kbd map $mappath" >> $LOGFILE
	132	if [ ! -e "$mappath" ] ; then
[1764]	133	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	134	if [ ! -e "$mappath" ] ; then
[963]	135	LogIt "Cannot add $mappath: kbd map file not found"
[747]	136	return
	137	fi
	138	else
	139	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
	140	fi
	141
	142	mkdir -p $bigdir/etc
[1919]	143	tar cf - $mappath 2>> /dev/null \| (cd $bigdir ; tar xf -) \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
[747]	144	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
	145	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	146	else
	147	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
	148	fi
	149	for included_item in $included_list ; do
[925]	150	if [ ! -e "$included_item" ] ; then
[1764]	151	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
	152	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	153	for ii in $sss ; do
[747]	154	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	155	done
	156	else
	157	AddKeyboardMappingFile $included_item
	158	fi
[747]	159	done
	160	}
	161
	162
	163	CopyDependenciesToDirectory() {
[1989]	164	local outdir incoming fname counter d found
[747]	165	outdir=$1
	166	mkdir -p $outdir
	167	incoming=`ReadLine`
	168	counter=0
	169	while [ "$incoming" != "" ] ; do
[1526]	170	# Non absolute file names should not arrive till here => skipped
	171	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
	172	LogIt "Unable to handle $incoming"
	173	incoming=`ReadLine`
	174	continue
	175	fi
	176	# no parent directory of incoming should be a link, copy is not possible in that case
	177	d=`dirname "$incoming"`
	178	found="false"
	179	while [ $d != "/" -a $found = "false" ]; do
	180	[ -h "$d" ] && found="true"
	181	d=`dirname "$d"`
	182	done
	183	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
[747]	184	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
[1526]	185	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[1989]	186	tar cf - $incoming 2> /dev/null \| (cd $outdir ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
	187
	188	# Only uncompress modules if not using udevd
	189	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
	190	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
[925]	191	fi
[1989]	192	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
[925]	193	counter=$(($counter+1))
	194	if [ "$counter" -ge "5" ] ; then
	195	counter=0
	196	echo -en "."
	197	fi
[747]	198	fi
	199	incoming=`ReadLine`
	200	done
	201	}
	202
	203
	204	CountItemsIn() {
	205	local r
	206	r=0
	207	for q in $1 ; do
	208	r=$(($r+1))
	209	done
	210	echo $r
	211	}
	212
	213
[925]	214	# Last function called before exiting
	215	# Parameter is exit code value
[931]	216	MindiExit() {
[925]	217	local my_partitions
[747]	218
[925]	219	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
	220	echo "End date : `date`" >> $LOGFILE
[1335]	221	if [ _"$MONDO_SHARE" != _"" ] ; then
[1349]	222	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[1315]	223	cat $LOGFILE >> /var/log/mondoarchive.log
[1349]	224	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
[1315]	225	fi
[747]	226
[925]	227	cd /
[1636]	228	sync&
[747]	229
[1636]	230	# Unmount what could remain mounted
[925]	231	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
	232	[ "$my_partitions" != "" ] && umount $my_partitions
[940]	233	# Clean temporary files only when standalone mindi
[948]	234	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
[940]	235	rm -Rf $MINDI_TMP
	236	fi
[925]	237	exit $1
	238	}
	239
[747]	240	Die() {
[925]	241	local i
[747]	242	if [ "$1" = "" ] ; then
[963]	243	LogIt "FATAL ERROR"
[747]	244	else
[963]	245	LogIt "FATAL ERROR. $1"
[747]	246	fi
	247
[1315]	248	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
[963]	249	LogIt "See http://www.mondorescue.org for more information."
[747]	250	LogIt "WE CANNOT HELP unless you enclose that file.\n"
[925]	251	MindiExit -1
[747]	252	}
	253
	254
	255	DropOptimizedLibraries() {
	256	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	257	filelist=$1
	258	outdir=$2
	259
	260	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	261	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	262	return 0
[747]	263	fi
	264	echo -en "Dropping i686-optimized libraries if appropriate"
	265	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	266	echo -en "."
	267	reason=""
[1483]	268	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	269	echo "$vanilla_lib_name" >> $filelist
	270	resolved=$vanilla_lib_name
[747]	271	echo "Adding $resolved to filelist" >> $LOGFILE
[861]	272	resolved=`ReadAllLink $resolved`
	273	echo "Adding $resolved to filelist" >> $LOGFILE
[859]	274	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	275	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
	276	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
	277	echo "Excluding $optimized_lib_name" >> $LOGFILE
[935]	278	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
[859]	279	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
	280	echo "$vanilla_lib_name" >> $filelist.tmp
	281	mv -f $filelist.tmp $filelist
[747]	282	done
[925]	283	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	284	mv -f $filelist.tmp $filelist
	285	echo -e "$DONE"
	286	}
	287
	288
	289	FindAndAddUserKeyboardMappingFile() {
	290	local r res mapfile mappath included_item included_list keyfile mp locale
[963]	291	LogIt "Analyzing your keyboard's configuration."
[747]	292	KEYDIR=/lib/kbd
	293	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
	294	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
	295	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
[1713]	296	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
	297	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
[747]	298	if [ ! -e "$KEYDIR" ] ; then
[963]	299	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	300	return 0
	301	fi
	302	if [ -e "/etc/sysconfig/keyboard" ] ; then
	303	echo "Red Hat-style config detected." >> $LOGFILE
	304	keyfile=/etc/sysconfig/keyboard
	305	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
	306	echo "Slackware-style config detected." >> $LOGFILE
	307	keyfile=/etc/rc.d/rc.keymap
	308	elif [ -e "/etc/rc.config" ] ; then
	309	echo "Debian-style config detected." >> $LOGFILE
	310	keyfile=/etc/rc.config
	311	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
	312	echo "Debian-style config detected." >> $LOGFILE
	313	echo -en "Adding the following keyboard mapping tables: "
	314	mkdir -p $bigdir/tmp
	315	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	316	KBDEPTH=0
	317	mkdir -p $bigdir/etc/console
[963]	318	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[747]	319	echo -e "$DONE"
	320	return 0
[1713]	321	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	322	echo "Ubuntu-style config detected." >> $LOGFILE
	323	echo -en "Adding the following keyboard mapping tables: "
	324	mkdir -p $bigdir/tmp
	325	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
	326	KBDEPTH=0
	327	mkdir -p $bigdir/etc/console-setup
	328	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
	329	echo -e "$DONE"
	330	return 0
[1465]	331	elif [ -e "/etc/conf.d/keymaps" ] ; then
	332	echo "Gentoo-style config detected." >> $LOGFILE
	333	keyfile=/etc/conf.d/keymaps
[747]	334	else
	335	echo -en "Searching for rc.config ..."
	336	keyfile=`find /etc -name rc.config \| head -n1`
	337	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[963]	338	LogIt "Unknown config detected. Default keyboard map will be used."
[747]	339	return
	340	else
	341	echo "Found $keyfile" >> $LOGFILE
	342	fi
	343	fi
	344	if [ ! -e "$KEYDIR/keymaps" ] ; then
[963]	345	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
[747]	346	return
	347	fi
	348	echo "keyfile=$keyfile" >> $LOGFILE
	349	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
	350	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[1465]	351	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
[747]	352	echo "locale=$locale" >> $LOGFILE
[1764]	353	#
	354	# Process the keymaps dir once for all
	355	# AddKeyboardMappingFile will use it recursively
	356	#
	357	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	358	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	359	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	360	# If we have multiple keymaps then log it !!
	361	echo "$mp" \| grep -q " "
	362	if [ $? -eq 0 ]; then
	363	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
	364	echo "The following one will be used" >> $LOGFILE
	365	fi
	366	for i in $mp ; do
	367	mappath=$i
	368	[ -e "$i" ] && [ ! -d "$i" ] && break
	369	done
	370	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[1854]	371	mappath=$(find / -name "/kbd/keymaps//$locale")
[747]	372	fi
	373	echo "mappath = $mappath" >> $LOGFILE
	374	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[963]	375	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
[747]	376	return
	377	fi
	378	echo -en "Adding the following keyboard mapping tables: "
	379	mkdir -p $bigdir/tmp
	380	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
[1983]	381	KBDElabel=memtest\nPTH=0
[747]	382	AddKeyboardMappingFile $mappath
	383	echo -e "$DONE"
[1764]	384	rm -f $MINDI_TMP/keymaps.find
[747]	385	return 0
	386	}
	387
	388
	389	FindIsolinuxBinary() {
	390	ISOLINUX=/usr/lib/isolinux.bin
	391	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	392	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	393	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	394	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	395	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[1854]	396	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[747]	397	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
	398	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
	399	}
	400
	401
	402	FindSpecificModuleInPath() {
	403	local modpaths pwd line
	404	pwd=`pwd`
	405	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	406	cd $MINDI_TMP
[747]	407	else
	408	cd /
	409	fi
	410	if [ ! -e "$1" ] ; then
[963]	411	LogIt "WARNING - cannot search specific path '$1'"
[747]	412	return 1
	413	fi
	414	modpaths=`find $1 -name $2.*o -type f`
[1815]	415	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
[747]	416	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
	417	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
	418	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
	419	echo "$modpaths"
	420	cd $pwd
	421	}
	422
	423
	424	GenerateGiantDependencyList() {
	425	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
	426
	427	echo -en "Analyzing dependency requirements"
	428	outfile=$1
[940]	429	tempfile=$MINDI_TMP/$$.txt
[747]	430	incoming=`ReadLine`
	431
	432	> $tempfile
	433	progress=0
	434	res=0
	435	noof_lines=$2
	436	while [ "$incoming" != "" ] ; do
[861]	437	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	438	incoming=`ReadLine`
	439	continue
	440	fi
	441	if [ "$incoming" = "LVMFILES:" ] ; then
	442	break
	443	fi
[747]	444	filelist=`GenerateListForFile "$incoming"`
	445	r=$?
[963]	446	[ "$r" -ne "0" ] && LogIt "$incoming not found"
[747]	447	res=$(($res+$r))
[861]	448	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
[747]	449	for fname in $filelist ; do
[861]	450	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	451	done
	452	progress=$(($progress+1))
	453	echo -en "\r\t\t\t\t\t\t\t\t"
	454	i=$(($progress*100))
	455	i=$(($i/$noof_lines))
	456	echo -en "$i"
	457	echo -en "%"
	458	modres=$(($progress%4))
	459	[ "$modres" -eq "0" ] && echo -en "\t/"
	460	[ "$modres" -eq "1" ] && echo -en "\t-"
	461	[ "$modres" -eq "2" ] && echo -en "\t\\"
	462	[ "$modres" -eq "3" ] && echo -en "\t\|"
	463	incoming=`ReadLine`
	464	done
[861]	465	if [ "$incoming" = "LVMFILES:" ] ; then
	466	incoming=`ReadLine`
	467	lvmversion=""
	468	while [ "$incoming" != "" ] ; do
	469	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	470	incoming=`ReadLine`
	471	continue
	472	fi
	473	filelist=`GenerateListForFile "$incoming"`
	474	for tool in $filelist ; do
	475	lvmresolved=`readlink -f $tool`
[1342]	476	if [ "$tool" = "$lvmresolved" ]; then
[861]	477	echo "$tool" >> $tempfile
	478	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	479	if [ "$lvmversion" = "" ] ; then
	480	lvmversion=`$lvmresolved`
	481	echo "$lvmresolved" >> $tempfile
	482	fi
	483	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
[1342]	484	if [ "$lvmversion" = "200" ]; then
[861]	485	# pvdata and lvmcreate_initrd don't exist in LVM2
	486	case "$toolstripped" in
	487	"pvdata")
	488	continue
	489	;;
	490	"lvmcreate_initrd")
	491	continue
	492	;;
	493	esac
	494	fi
	495	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	496	if [ -e "$toolpath" ] ; then
	497	echo "$toolpath" >> $tempfile
	498	echo "$tool" >> $tempfile
	499	else
	500	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
	501	fi
	502	if [ -e "$toolpath" ] ; then
	503	echo "$toolpath" >> $tempfile
	504	echo "$tool" >> $tempfile
	505	else
	506	echo "Where are your LVM-Tools? Couldn't find $tool"
	507	fi
	508	else
	509	echo "$tool" >> $tempfile
	510	fi
	511	done
	512	progress=$(($progress+1))
	513	echo -en "\r\t\t\t\t\t\t\t\t"
	514	i=$(($progress*100))
	515	i=$(($i/$noof_lines))
	516	echo -en "$i"
	517	echo -en "%"
	518	modres=$(($progress%4))
	519	[ "$modres" -eq "0" ] && echo -en "\t/"
	520	[ "$modres" -eq "1" ] && echo -en "\t-"
	521	[ "$modres" -eq "2" ] && echo -en "\t\\"
	522	[ "$modres" -eq "3" ] && echo -en "\t\|"
	523	incoming=`ReadLine`
	524	done
[747]	525	fi
	526	echo -en "$DONE\nMaking complete dependency list"
	527
	528	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	529	mv -f $tempfile.new $tempfile
	530	> $outfile.pre
	531	progress=0
	532	noof_lines=`cat $tempfile \| wc -l`
[1876]	533	echo "---------------------------------" >> $LOGFILE
	534	echo "List of dependencies: " >> $LOGFILE
	535	echo "---------------------------------" >> $LOGFILE
[747]	536	for fname in `cat $tempfile` ; do
[1876]	537	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	538	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	539	progress=$(($progress+1))
[747]	540	echo -en "\r\t\t\t\t\t\t\t\t"
	541	i=$(($progress*100))
	542	i=$(($i/$noof_lines))
	543	echo -en "$i"
	544	echo -en "%"
[925]	545	modres=$(($progress%4))
[747]	546	[ "$modres" -eq "0" ] && echo -en "\t/"
	547	[ "$modres" -eq "1" ] && echo -en "\t-"
	548	[ "$modres" -eq "2" ] && echo -en "\t\\"
	549	[ "$modres" -eq "3" ] && echo -en "\t\|"
	550	done
[1684]	551	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	552	mkdir -p $bigdir/tmp
	553	mkdir -p $bigdir/sbin
	554	mkdir -p $bigdir/bin
[940]	555	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[963]	556	LogIt "\nIncorporating post-nuke tarball"
[925]	557	old_pwd=`pwd`
	558	cd $bigdir
[963]	559	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
[925]	560	cd $old_pwd
[747]	561	fi
[963]	562	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[925]	563	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
	564	else
[963]	565	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	566	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[925]	567	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
	568	Die "Odd."
	569	fi
[963]	570	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
[940]	571	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[963]	572	LogIt "Incorporating NFS-related settings"
[925]	573	for r in NFS-* ISO-PREFIX ; do
[963]	574	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[925]	575	echo "Copying $r to ramdisk" >> $LOGFILE
	576	done
	577	fi
[747]	578	fi
[925]	579	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	580	rm -f $tempfile $outfile.pre
	581	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
	582	return $res
	583	}
	584
	585
	586	GenerateListForFile() {
	587	local files_found loc fname incoming i res
	588	incoming="$1"
	589	files_found=""
	590	res=0
	591
	592	for fname in $incoming ; do
	593	files_found="$files_found `LocateFile $fname`"
	594	done
	595
	596	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	597	}
	598
	599
	600	# Returns all disk devices which are part of a raid array
	601	GetAllRaidMembers() {
	602	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	603	}
	604
	605
	606	GetFileSizeList() {
	607	local i
	608	for i in `find $1 -type d -o -print` ; do
	609	du -sk $i
	610	done
	611	}
	612
	613
	614	GetHomeDir() {
	615	local res loc
	616	loc=`which $1 2>/dev/null`
	617	res=`file $loc \| $AWK '{print $NF;}'`
	618	dirname $res
	619	}
	620
	621
[1230]	622	# Check kernel filesystem capabilites for accessing initrd image
	623	#
	624	# Interface definition:
	625	# param #1: absolute path to kernel image
	626	GetInitrdFilesystemToUse() {
	627
	628	# interface test: make sure we have one parameter
	629	if [ $# -ne 1 ]; then
	630	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	631	fi
	632
	633	# interface parameters
	634	local lvKernelImage=$1
	635
	636	# local constants (filesystem magic strings)
	637	local lcMagicCramfs="<3>cramfs: wrong magic"
	638	local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
[1730]	639	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
[1230]	640
	641	# local variables
	642	local lvOffset
	643	local lvScanRes
	644	local lvUseFilesystem
	645
	646	# say where we are.
	647	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
	648
	649	# verify that file exists
	650	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	651
[1566]	652	# Kernel may be gzip compressed
[1730]	653	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	654	if [ $? -eq 0 ]; then
[1730]	655	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	656	else
	657	# get offet of gzip magic "1f8b0800" in file
	658	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
	659	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
	660	lvOffset=`expr $lvOffset / 2`
	661	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
[1230]	662
[1566]	663	# scan kernel image for initrd filessystem support
[1730]	664	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
[1566]	665	fi
[1230]	666
	667	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
[1730]	668	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
[1230]	669	lvUseFilesystem="ext2fs"
[1730]	670	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
[1230]	671	lvUseFilesystem="initramfs"
[1730]	672	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
[1230]	673	lvUseFilesystem="cramfs"
	674	else
	675	lvUseFilesystem="UNSUPPORTED"
	676	fi
	677
	678	# say what we are using
	679	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
	680
	681	# return file system to use
	682	echo "$lvUseFilesystem"
	683
	684	}
	685
[747]	686	# Searches parent raid device of given disk device
	687	# $1: disk device (i.e. /dev/hda1)
	688	GetParentRaidDev() {
	689	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
	690	}
	691
	692
	693	# Searches members of raid device
	694	# $1: raid device (/dev/md...)
	695	GetRaidDevMembers() {
	696	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	697	}
	698
	699
	700	HackPathsToFailsafe() {
	701	local incoming newpath kver stub i pwd
	702	kver=`uname -r`
	703	incoming=`ReadLine`
	704	pwd=`pwd`
[940]	705	cd $MINDI_TMP
[747]	706	while [ "$incoming" != "" ] ; do
[925]	707	stub=`basename $incoming`
	708	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
	709	for i in $newpath ; do
	710	echo "$i"
	711	done
	712	read incoming
[747]	713	done
	714	cd $pwd
	715	}
	716
	717
	718	ListAllPartitions() {
	719	local res currline partition all_partitions ap_orig remaining i j
	720
[2024]	721	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
[747]	722	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	723	if [ -e "/vmfs/volumes" ]; then
	724	# For VMWare ESX 3 get the device names of these volumes
	725	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
	726	fi
[747]	727	return
	728	}
	729
	730
	731	ListImagesForUser() {
	732	local path fname
[1983]	733	path=$MINDI_CACHE
[747]	734	echo -en "In the directory '$path' you will find the images:-\n"
	735	for fname in `ls $path \| grep -F mindi-` ; do
	736	printf "%19s " $fname
	737	done
	738	echo " "
	739	}
	740
	741
	742	ListKernelModulePaths() {
	743	local module_list module fname oss r kern
	744	oss="/root/oss/modules"
[1399]	745	module_list="$MODULES"
[1230]	746	# Remove unwanted modules from list
	747	for i in $DENY_MODS; do
	748	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1726]	749	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1230]	750	done
[747]	751	###
	752	### Sq-Modification ... Use kernelname for module search path if specified
	753	###
	754	# kern="`uname -r`"
	755	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
	756	then
	757	kern=${kernelname}
	758	else
	759	kern="`uname -r`"
	760	fi
	761	###
	762	### Sq-Mod End
	763	###
	764	for module in $module_list $EXTRA_MODS ; do
	765	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
	766	echo "module $module --> $r" >> $LOGFILE
	767	[ "$r" ] && echo "$r"
	768	[ -f "$oss" ] && find $oss \| grep -F $module
	769	done
	770	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	771	[ -f "$oss" ] && find $oss.* 2> /dev/null
	772	}
	773
[1784]	774	#
	775	# Critical function which computes all dependencies (dyn. lib.)
	776	# for a list of binaries
	777	#
[747]	778	LocateDeps() {
	779	local incoming fname deps
[1724]	780	incoming="$*"
[747]	781	for fname in $incoming ; do
	782	if [ ! -e "$fname" ] ; then
[963]	783	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
[747]	784	if echo $fname \| grep lvm &> /dev/null ; then
	785	echo "This warning only affects you if you are using LVM." >> $LOGFILE
[1399]	786	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[747]	787	echo "I think you are, so please take heed!" >> $LOGFILE
	788	else
	789	echo "I don't think you are, so don't worry about it." >> $LOGFILE
	790	fi
	791	fi
	792	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
	793	echo "$fname is softlink" >> $LOGFILE
	794	else
[1526]	795	ldd $fname 2> /dev/null \| ProcessLDD
[747]	796	fi
	797	done
	798	}
	799
[925]	800
[860]	801	# Give all symlinks recursively of a full path name
	802	ReadAllLink() {
	803	file="$1"
[747]	804
[1883]	805	echo "$file"
[860]	806	if [ ! -h $file ]; then
	807	return 0
	808	fi
[747]	809
[1883]	810	link=`readlink $file`
[862]	811	d=`dirname $file`
[1883]	812	fchar=`echo $link \| cut -c1`
	813	# If mother dir is a link print it
[1230]	814	if [ -h "$d" ]; then
[1784]	815	echo "$d"
[1883]	816	d=`readlink $d`
	817	fi
	818	if [ "$fchar" != "/" ]; then
	819	# Relative or local link
	820	ReadAllLink "$d/$link"
[860]	821	else
[1883]	822	# Absolute path
	823	ReadAllLink $link
[1230]	824	fi
[860]	825	}
	826
[925]	827
[747]	828	LocateFile() {
	829	local i path fname_to_find location output resolved tmp stub cache_id loclist
	830	fname_to_find="$1"
[1526]	831	# It's an absolute path
[747]	832	if echo "$fname_to_find" \| grep -x "/.*" ; then
[859]	833	output="$fname_to_find"
[860]	834	if [ -h "$output" ] ; then
	835	output="`ReadAllLink $output` $output"
	836	fi
[859]	837	echo "$output"
	838	return 0
[747]	839	fi
[1526]	840	# It's not an absolute path
[747]	841	output=""
[1526]	842	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	843	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	844	[ -h "$path" ] && continue
	845	[ ! -e "$path/$fname_to_find" ] && continue
	846	output="$path/$fname_to_find $output"
	847	if [ -h "$path/$fname_to_find" ] ; then
	848	output="`ReadAllLink $path/$fname_to_find` $output"
	849	fi
[747]	850	done
	851	if [ "$output" = "" ] ; then
[860]	852	return 1
[747]	853	fi
	854	echo "$output"
	855	return 0
	856	}
	857
	858
	859	LogIt() {
	860	if [ -e /dev/stderr ] ; then
[925]	861	echo -e "$1" >> /dev/stderr
[747]	862	elif [ -e /usr/bin/logger ] ; then
[925]	863	/usr/bin/logger -s $1
[747]	864	fi
[965]	865	echo -e "$1" >> $LOGFILE
[747]	866	}
	867
	868
	869	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
	870	MakeMondoConfigFile() {
	871	local outfile use_lzo use_comp use_star
	872	outfile=$1
	873	> $outfile
	874	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	875	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	876	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	877	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	878	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	879	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	880	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	881	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[747]	882	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	883	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	884	echo "use-lzo $use_lzo" >> $outfile
[998]	885	echo "use-gzip $use_gzip" >> $outfile
[747]	886	echo "use-star $use_star" >> $outfile
	887	echo "use-comp $use_comp" >> $outfile
	888	echo "datestamp `date`" >> $outfile
	889	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	890	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
	891	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
	892	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
	893	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
	894	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
	895	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
	896	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
	897	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
	898	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	899	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	900	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
	901	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
	902	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	903	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
	904	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
	905	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	906	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	907	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[949]	908	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	909	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
[1948]	910	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
[747]	911	}
	912
	913
	914	MakeMountlist() {
	915	local scratchdir mountlist all_partitions current_partition \
	916	partition_size partition_format outstring partition_number \
	917	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	918	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	919
[967]	920	echo "Your raw fstab file looks like this:" >> $LOGFILE
	921	echo "------------------------------------" >> $LOGFILE
[747]	922	cat $MY_FSTAB >> $LOGFILE
[967]	923	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
	924	echo "-----------------------------------" >> $LOGFILE
[747]	925
	926	# scratchdir, mountlist(OUT)
[940]	927	scratchdir=$MINDI_TMP
[747]	928	mountlist=$1
	929
	930	# NB: partition = device
	931	# NB: mountpt = where the device is mounted
	932
	933	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	934
[1684]	935	[ "$mountlist" != "" ] && rm -Rf $mountlist
[747]	936	> $mountlist
	937	all_partitions=""
	938
	939	if [ $LVM != "false" ]; then
[1885]	940	echo -en "Analyzing LVM...\n"
[968]	941	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	942	if [ $? -ne 0 ]; then
[963]	943	LVM="false"
	944	fi
[968]	945	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
[747]	946	fi
	947	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	948	# echo "all partitions = $all_partitions" > /dev/stderr
	949	for i in $IMAGE_DEVS ; do
	950	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	951	done
	952	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[1755]	953	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
[747]	954	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
	955	for c_p in $all_partitions ; do
	956	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
	957	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	958	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	959	current_partition=`readlink -f $c_p`
[747]	960	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
	961	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	962	else
	963	current_partition="$c_p"
	964	fi
	965	[ "$c_p" = "none" ] && continue
	966	redhat_label=""
[1831]	967	label=""
[957]	968	uuid=""
[861]	969	absolute_partition=`readlink -f $c_p`
[747]	970	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
	971
	972	# Detects noauto partitions not mounted and exclude them
	973	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	974	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	975	continue
	976	fi
	977
[1986]	978	# set default in case we dont't find it
	979	str_to_find_fmt_with=$current_partition
	980
[747]	981	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	982	# current_partition contains only first column of /etc/fstab
	983	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
[980]	984	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	985	actual_dev=""
[853]	986
	987	# 1st try, findfs - the RHEL way of finding labels and their partitions
	988	if [ -x "/sbin/findfs" ]; then
[855]	989	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
[853]	990	fi
[747]	991
[853]	992	# 2nd try : blkid, the good way for all LABEL except swap
	993	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	994	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	995	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	996	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	997	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	998	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	999	for dev in `ls /dev/mapper/*`; do
[963]	1000	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1001	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1002	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1003	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1004	break
	1005	fi
	1006	done
	1007	fi
	1008	fi
	1009
[853]	1010	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1011	# For LVM gives a /dev/mapper entry
	1012	if [ "x$actual_dev" = "x" ]; then
[980]	1013	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1014	fi
	1015
[853]	1016	# 4th try, with vol_id
[747]	1017	# SWAP only
	1018	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1019	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1020	for dev_swap in $list_swaps ; do
	1021	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
	1022	if [ "x$dev_exists" != "x" ]; then
	1023	actual_dev=$dev_swap
	1024	break;
	1025	fi
	1026	done
	1027	fi
	1028
[853]	1029	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1030	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1031	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1032	# SWAP only
[789]	1033	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1034	skip=""
	1035	uname="`uname -r`"
	1036	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1037	# 2.6.12 needs 16 (FC3)
	1038	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1039	# 2.6.19 and upper needs 1052
	1040	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1041	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
	1042	if [ $skip = "" ]; then
	1043	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1044	fi
[853]	1045	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1046	do
	1047	# Location of the swap label for kernel 2.6
[2013]	1048	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1049	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1050	actual_dev=$try_dev
[853]	1051	fi
	1052	done
[747]	1053	fi
[1008]	1054
	1055	# Check if one of all those tries has known success
	1056	if [ "x$actual_dev" != "x" ]; then
	1057	current_partition=$actual_dev
	1058	else
[1885]	1059	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1060	fi
[957]	1061	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1062	# current_partition contains only first column of /etc/fstab
[1009]	1063	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
[980]	1064	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1065	actual_dev=""
	1066
	1067	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1068	if [ -x "/sbin/findfs" ]; then
	1069	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1070	fi
	1071
[1531]	1072	# 2nd try : blkid, the good way for all UUID except swap
[957]	1073	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[980]	1074	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1075	# For LVM FS it will give a /dev/dm-# which should then be converted
	1076	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1077	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1078	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1079	for dev in `ls /dev/mapper/*`; do
[963]	1080	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1081	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1082	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1083	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1084	break
	1085	fi
	1086	done
	1087	fi
	1088	fi
	1089
	1090	# 3th try, with vol_id
	1091	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[963]	1092	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1093	for dev in $list_dev ; do
	1094	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
	1095	if [ "x$dev_exists" != "x" ]; then
	1096	actual_dev=$dev
	1097	break;
	1098	fi
	1099	done
	1100	fi
	1101
[1531]	1102	# 4th try, with dumpuuid (VMWare only ?) for swap
	1103	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
	1104	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
	1105	for dev in $list_dev ; do
	1106	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
	1107	if [ "x$dev_exists" != "x" ]; then
	1108	actual_dev=$dev
	1109	break;
	1110	fi
	1111	done
	1112	fi
	1113
[747]	1114	# Check if one of all those tries has known success
	1115	if [ "x$actual_dev" != "x" ]; then
	1116	current_partition=$actual_dev
	1117	else
[1315]	1118	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[747]	1119	fi
	1120	else
[1863]	1121	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1122	# they use symlinks in fstab unrelated to what is shown in mount !
	1123	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1124	# set default in case we dont't find it
[1863]	1125	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -Ev "^#" \| $AWK '{print $1}'`; do
[1864]	1126	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
[1863]	1127	str_to_find_fmt_with=$tmpp
[1865]	1128	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$tmpp" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1129	break;
[1863]	1130	fi
	1131	done
	1132	fi
[747]	1133	fi
	1134
	1135	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
	1136	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1137	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1138	# the former is then a link to the latter, so we test whether
	1139	# $current_partition is actually such a link or not and set
[755]	1140	# $current_lvolume accordingly. On Debian you may find more than one answer
	1141	# so we remove the one corresponding to /dev/.static
	1142	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1143	# principle is the same and we need to find the link to it as well.
	1144	# Note that $current_lvolume may well be an
[747]	1145	# ordinary device. It is just to make sure that we feed the right value
	1146	# into any of the LVM tools if possible.
	1147
	1148	current_lvolume="$current_partition"
[763]	1149	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1150	# .static dir are a Debian specificity
[763]	1151	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1152	echo $current_lvolume \| grep -q ' '
[784]	1153	if [ $? -eq 0 ]; then
[755]	1154	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
	1155	fi
[747]	1156	fi
	1157	#
	1158	# End of LVM device style variation code (other than $current_lvolume).
	1159
[745]	1160	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1161	# Size computed via LVM not directly
[747]	1162	partition_size="lvm"
	1163	else
	1164	partition_size=`SizeOfPartition $current_partition`
	1165	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1166	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1167	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
	1168	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
	1169	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
	1170	[ "$partition_format" != "swap" ] && partition_format="swap"
	1171	if [ "$partition_size" = "" ] ; then
	1172	totalsize=0
	1173	items=0
	1174	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
	1175	totalsize=$(($totalsize+$i))
	1176	items=$(($items+1))
	1177	done
	1178	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1179	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1180	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
	1181	fi
	1182	fi
	1183	fi
	1184	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1185	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1186	if [ "$partition_mountpt" = "" ] ; then
	1187	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1188	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1189	partition_mountpt="raid"
	1190	partition_format="raid"
	1191	else
	1192	partition_mountpt="lvm"
	1193	partition_format="lvm"
	1194	fi
	1195	fi
	1196	fi
	1197	psz=$partition_size
	1198	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
	1199	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1200	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1201	partition_mountpt="image"
	1202	old_partition_fmt=$partition_format
	1203	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1204	partition_size=$(($partition_size+1)); # just in case
	1205	if [ "$partition_format" = "Linux" ] ; then
	1206	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
	1207	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
	1208	partition_format=$old_partition_fmt
	1209	fi
	1210	fi
	1211	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
	1212	echo "Excluding $current_partition from mountlist" >> $LOGFILE
	1213	continue
	1214	fi
	1215	if [ ! "$partition_mountpt" ] ; then
[965]	1216	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
[1883]	1217	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1218	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1219	[ "$partition_format" ] && break
	1220	done
[965]	1221	echo "------- $FDISK log end ------------" >> $LOGFILE
[747]	1222	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1223	partition_format="compaq"
	1224	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[963]	1225	LogIt "Unable to find mountpoint of $current_partition - ignoring"
[747]	1226	continue
	1227	fi
	1228	fi
[1755]	1229	if [ "$redhat_label" ]; then
	1230	label="$redhat_label"
[1756]	1231	elif [ "$uuid" ]; then
[1755]	1232	label="$uuid"
	1233	fi
[747]	1234	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1235	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[1755]	1236	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1237	if [ "$current_partition" = "" ] ; then
	1238	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
	1239	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1240	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1241	partition_mountpt=raid
	1242	partition_format=raid
[1755]	1243	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1244	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1245	else
	1246	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
	1247	fi
	1248	elif [ "$partition_format" = "" ] ; then
	1249	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
	1250	elif [ "$partition_size" = "" ] ; then
	1251	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
	1252	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1253	continue
	1254	else
	1255	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
	1256	echo "Stupid bastard..." >> $LOGFILE
	1257	partition_format="vfat"
	1258	fi
[1755]	1259	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
	1260	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1261	fi
	1262	done
	1263	}
	1264
	1265
	1266	MakeSureNumberIsInteger() {
	1267	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
	1268	if [ "$res" != " " ] && [ "$res" != "" ] ; then
	1269	echo "result = '$res'"
	1270	Die "$1 should be an integer"
	1271	fi
	1272	}
	1273
	1274
	1275	OfferToMakeBootableISO() {
	1276	local i old_pwd
[1684]	1277	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[966]	1278	echo -en "Shall I make a bootable CD image? (y/[n]) "
[747]	1279	read i
	1280	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1281	fi
[1885]	1282	if [ _"$MINDI_TMP" = _"" ]; then
	1283	Die "MINDI_TMP undefined"
[747]	1284	fi
[940]	1285	rm -Rf $MINDI_TMP/iso
[1983]	1286	mkdir -p $MINDI_TMP/iso/{images,archives}
	1287	cp -f $MINDI_CACHE/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/.gz to $MINDI_TMP/iso/images"
[747]	1288	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1289	for i in memdisk memtest.bin memtest.img ; do
[953]	1290	j=$MINDI_LIB/$i
[1983]	1291	k=$MINDI_TMP/iso
[953]	1292	if [ -e "$j" ] ; then
[963]	1293	LogIt "Copying $j to $k"
[953]	1294	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1295	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
[1885]	1296	if [ _"$MONDO_SHARE" != _"" ]; then
	1297	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
	1298	fi
[953]	1299	fi
[747]	1300	done
[1983]	1301	MakeMessageFile > $MINDI_TMP/iso/message.txt
	1302	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
	1303	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
[1885]	1304	if [ _"$MONDO_SHARE" != _"" ]; then
[1929]	1305	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
[1983]	1306	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
[1885]	1307	fi
[1983]	1308	MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
[747]	1309	if [ "$ARCH" != "ia64" ] ; then
[1983]	1310	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
[747]	1311	fi
[1983]	1312	old_pwd=`pwd`
[940]	1313	cd $MINDI_TMP/iso
[747]	1314	if [ "$ARCH" != "ia64" ] ; then
[1885]	1315	if [ _"$MONDO_SHARE" != _"" ]; then
[1983]	1316	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
	1317	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
[1885]	1318	fi
[1983]	1319	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
[747]	1320	else
[1983]	1321	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
[1950]	1322	rm -f images/mindi-bootroot.$BOOT_SIZE.img
[747]	1323	fi
	1324	if [ "$?" -ne "0" ] ; then
[1885]	1325	echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
[940]	1326	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
[1885]	1327	echo "$ISO_CMD returned the following errors:-"
[940]	1328	cat $MINDI_TMP/mkisofs.log
[963]	1329	LogIt "Failed to create ISO image."
[747]	1330	else
[1880]	1331	echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" \| tee -a $LOGFILE
[747]	1332	fi
[940]	1333	rm -f $MINDI_TMP/mkisofs.log
[747]	1334	cd $old_pwd
	1335	}
	1336
	1337
[1684]	1338	OfferToMakeBootableUSB() {
	1339	local i old_pwd
	1340	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
[1786]	1341	echo -n "Shall I make a bootable USB image ? (y/[n]) "
[1764]	1342	read i
	1343	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1344	if [ "$USBDEVICE" = "" ]; then
	1345	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1346	read dev
	1347	USBDEVICE=$dev
[1722]	1348	fi
[1764]	1349	echo "WARNING: This will erase all content on $USBDEVICE"
	1350	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
[1684]	1351	fi
	1352	if [ _"$MINDI_TMP" = _"" ]; then
	1353	Die "MINDI_TMP undefined"
	1354	fi
	1355	rm -Rf $MINDI_TMP/usb
	1356	mkdir -p $MINDI_TMP/usb
	1357	USBPART="${USBDEVICE}1"
	1358
	1359	echo -en "Transforming $USBDEVICE in a Bootable device "
	1360	echo -en "."
	1361	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
	1362	echo "Checking $USBDEVICE" >> $LOGFILE
[1857]	1363	$FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
[1684]	1364	if [ $? -ne 0 ]; then
	1365	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
	1366	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1367	exit -1
	1368	fi
	1369	echo -en "."
[1691]	1370	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
[1721]	1371	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[1684]	1372	echo "Erasing $USBDEVICE" >> $LOGFILE
[1721]	1373	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
[1684]	1374	d
	1375	d
	1376	d
	1377	d
	1378	n
	1379	p
	1380	1
	1381
	1382
	1383	t
	1384	b
	1385	a
	1386	1
	1387	w
	1388	EOF
	1389	if [ $? -ne 0 ]; then
	1390	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
	1391	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
	1392	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1393	MindiExit -1
	1394	fi
	1395	echo -en "."
	1396	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
[1688]	1397	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
[1684]	1398	if [ $? -ne 0 ]; then
	1399	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
	1400	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
	1401	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1402	MindiExit -1
	1403	fi
	1404	echo -en "."
	1405	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
	1406	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
	1407	if [ $? -ne 0 ]; then
	1408	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
	1409	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
	1410	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1411	MindiExit -1
	1412	fi
	1413	echo -en "."
[1691]	1414	mkdir -p $MINDI_TMP/usb/images
[1983]	1415	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
[1684]	1416	echo -en "."
	1417	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
	1418	for i in memdisk memtest.bin memtest.img ; do
	1419	j=$MINDI_LIB/$i
	1420	k=$MINDI_TMP/usb
	1421	if [ -e "$j" ] ; then
	1422	LogIt "Copying $j to $k"
	1423	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
	1424	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
	1425	fi
	1426	done
	1427	echo -en "."
[1983]	1428	MakeMessageFile > $MINDI_TMP/usb/message.txt
[1684]	1429	echo -en "."
[1983]	1430	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
[1684]	1431	echo -en "."
[1983]	1432	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
[1684]	1433	echo -en "."
[1983]	1434	MakeBootConfFile syslinux > syslinux.cfg
[1684]	1435	echo -en "."
[1721]	1436	umount $MINDI_TMP/usb
[1684]	1437	if [ "$ARCH" != "ia64" ] ; then
	1438	syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
	1439	if [ "$?" -ne "0" ] ; then
	1440	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
	1441	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
	1442	LogIt "Failed to create USB image."
	1443	else
	1444	echo -e "$DONE"
	1445	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
	1446	fi
	1447	rm -f $MINDI_TMP/syslinux.log
	1448	else
	1449	echo "No USB boot support for ia64" \| tee -a $LOGFILE
	1450	MindiExit -1
	1451	fi
	1452	echo -en "."
	1453	}
	1454
	1455
[747]	1456	MakeMessageFile() {
[1983]	1457	iss="/dev/null"
	1458	[ -e /etc/issue ] && iss="/etc/issue"
	1459	[ -e /etc/issue.net ] && iss="/etc/issue.net"
	1460	if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
	1461	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
[747]	1462	else
[1983]	1463	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
[747]	1464	fi
[1885]	1465	if [ _"$MONDO_SHARE" != _"" ]; then
	1466	if [ "$CDRECOVERY" != "yes" ] ; then
	1467	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
	1468	echo -en "Press <enter> to continue.\n"
	1469	elif [ ! "$MINDI_TMP" ] ; then
	1470	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
[1983]	1471	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1472	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
	1473	fi
[1885]	1474	else
	1475	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1476	fi
[1983]	1477	else
	1478	echo -en "\
[747]	1479	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1480	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1481	fi
[747]	1482	fi
	1483	echo -en "\n\n\n"
	1484	}
	1485
	1486
[1983]	1487	MakeBootConfFile() {
[1885]	1488	local options i ooo
[747]	1489	options=""
[1983]	1490	# Type of boot file (elilo or syslinux/isolinux)
	1491	type=$1
	1492	if [ "$type" = "elilo" ]; then
	1493	sep="="
	1494	else
	1495	sep=" "
	1496	fi
[925]	1497
[1983]	1498	# Generic header for conf file
	1499	if [ "$type" != "elilo" ] ; then
	1500	echo -en "prompt 1\ndisplay message.txt\n"
	1501	else
	1502	echo -en "prompt\n"
[925]	1503	fi
[1983]	1504
	1505	# Compute which default option to boot from
[747]	1506	if [ "$CDRECOVERY" = "yes" ] ; then
[1983]	1507	echo -en "default${sep}RESTORE\n"
	1508	# In case it's mondoarchive
[1885]	1509	elif [ _"$MONDO_SHARE" != _"" ]; then
[940]	1510	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[1983]	1511	echo -en "default${sep}iso\n"
[747]	1512	else
[1983]	1513	echo -en "default${sep}interactive\n"
[747]	1514	fi
	1515	else
[1983]	1516	echo -en "default${sep}expert\n"
[747]	1517	fi
	1518
[1983]	1519	# Handle timeout
[747]	1520	if [ "$CDRECOVERY" != "yes" ] ; then
[1983]	1521	echo -en "timeout${sep}300\n"
	1522	else
	1523	echo -en "timeout${sep}10000\n"
[747]	1524	fi
	1525	echo -en "\n"
[1983]	1526
	1527	# prepare which labels will be generted
[747]	1528	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	1529	options="RESTORE expert"
[1885]	1530	else
	1531	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1532	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	1533	options="iso"
	1534	else
	1535	options="interactive expert compare iso nuke isonuke"
	1536	fi
	1537	else
	1538	options="expert"
[925]	1539	fi
[747]	1540	fi
[1983]	1541
	1542	# Generate rest of conf file
[747]	1543	for i in $options ; do
[925]	1544	ooo=$i
	1545	[ "$ooo" = "RESTORE" ] && ooo="nuke"
[1983]	1546	if [ "$type" = "elilo" ]; then
	1547	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
[925]	1548	else
[1983]	1549	outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
[925]	1550	fi
[1885]	1551	echo -en "$outstr"
[747]	1552	done
[1983]	1553
	1554	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	1555	if [ "$type" = "elilo" ]; then
	1556	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
	1557	echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
	1558	else
	1559	echo -en "label memtest\n\tkernel /memtest.bin\n"
	1560	echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
	1561	fi
	1562	fi
[747]	1563	}
	1564
	1565
	1566	PrepareBootDiskImage_LILO() {
[1983]	1567	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
	1568	imagesdir=$MINDI_CACHE
	1569	kernelpath=$1
[747]	1570
	1571	retval=0
	1572	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1573	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1574	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1575	echo -en "..."
[1885]	1576	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1577	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1578	mkdir -p $mountpoint
[1885]	1579	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
[1983]	1580	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
	1581	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[964]	1582	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[747]	1583	mkdir -p $mountpoint/etc
[1983]	1584	liloconf=$mountpoint/elilo.conf
[747]	1585
[1983]	1586	MakeBootConfFile elilo > $liloconf
[747]	1587
[1230]	1588	# Copy it so that CD-ROM menu entry is satisfied
[1983]	1589	mountefi=0
	1590	df -T \| grep /boot/efi \| grep -q vfat
	1591	if [ $? -ne 0 ]; then
	1592	mount /boot/efi
[1230]	1593	if [ $? -ne 0 ]; then
[1983]	1594	echo "You have to mount your EFI partition when using mindi"
	1595	MindiExit -1
[1230]	1596	fi
[1983]	1597	mountefi=1
[1230]	1598	fi
[1983]	1599	el=`find /boot/efi -name elilo.efi`
	1600	cp $el $mountpoint
	1601	cp $liloconf $mountpoint
	1602	if [ $mountefi -eq 1 ]; then
	1603	umount /boot/efi 2>&1 > /dev/null
	1604	fi
[1230]	1605
[1983]	1606	echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
	1607	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
[747]	1608	if [ "$?" -ne "0" ] ; then
[1983]	1609	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1610	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1611	LogIt "Please unload some of your modules and try again."
[940]	1612	rm -f $MINDI_TMP/mtpt.$$
[1983]	1613	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1614	retval=$(($retval+1))
	1615	fi
[1983]	1616	MakeMessageFile > $mountpoint/message.txt
[747]	1617
	1618	mkdir -p $mountpoint/tmp
[1983]	1619	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1620	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
[747]	1621	fi
	1622
[925]	1623	# copy the kernel across
[1230]	1624	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1625	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1626	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1627	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
[1885]	1628	if [ "$?" -ne "0" ] ; then
[925]	1629	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1630	du -sk $mountpoint/* >> $LOGFILE
	1631	echo "--- end of list of files ---" >> $LOGFILE
	1632	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1633	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[1998]	1634	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[925]	1635	cd $old_pwd
[747]	1636	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1637	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[925]	1638	# losetup /dev/loop0 -d
[1998]	1639	[ "$imagefile" != "" ] && rm -f $imagefile
[1885]	1640	return 0
[747]	1641	fi
[1796]	1642	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1643	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1644	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1645	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[1794]	1646	# make it bootable
[1998]	1647	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[963]	1648	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[1983]	1649	if [ "$KERN_DISK_MADE" ] ; then
[925]	1650	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
[747]	1651	fi
[925]	1652
[1983]	1653	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
[747]	1654	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1655	echo -en "..."
[963]	1656	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1657	if [ "$retval" -eq "0" ] ; then
[1885]	1658	echo -en "...$DONE\n"
[747]	1659	if [ "$KERN_DISK_MADE" ] ; then
[1885]	1660	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1661	fi
	1662	else
[1885]	1663	echo -en "...failed\n"
	1664	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[1998]	1665	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	1666	fi
[963]	1667	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1668	return $retval
	1669	}
	1670
	1671
	1672	PrepareBootDiskImage_SYSLINUX() {
[1983]	1673	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
	1674	imagesdir=$MINDI_CACHE
	1675	kernelpath=$1
[747]	1676	do_boot_root_thingy=""
	1677	local retval old_pwd
	1678	retval=0
[925]	1679
[747]	1680	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
[1885]	1681	echo -en "Making "$BOOT_SIZE"KB boot disk..."
[1983]	1682	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
[747]	1683	echo -en "..."
[1885]	1684	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
[940]	1685	mountpoint=$MINDI_TMP/mountpoint.$$
[747]	1686	mkdir -p $mountpoint
[1885]	1687	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
	1688	echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
	1689	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
	1690	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
	1691
[963]	1692	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
[925]	1693
	1694	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
[1983]	1695	MakeMessageFile > $mountpoint/message.txt
	1696	MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
	1697	echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
	1698	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
[747]	1699	if [ "$?" -ne "0" ] ; then
[1983]	1700	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
[940]	1701	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
[963]	1702	LogIt "Please unload some of your modules and try again."
[940]	1703	rm -f $MINDI_TMP/mtpt.$$
[1983]	1704	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
[747]	1705	retval=$(($retval+1))
	1706	fi
	1707
	1708	mkdir -p $mountpoint/tmp
[1983]	1709	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
	1710	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
	1711	fi
[747]	1712
[925]	1713	# copy the kernel across
[1230]	1714	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
[747]	1715	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
[1796]	1716	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1717	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
[1885]	1718	if [ "$?" -ne "0" ] ; then
[747]	1719	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
	1720	du -sk $mountpoint/* >> $LOGFILE
	1721	echo "--- end of list of files ---" >> $LOGFILE
	1722	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
[1885]	1723	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
[1998]	1724	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
[747]	1725	cd $old_pwd
	1726	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
[963]	1727	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1728
[1998]	1729	[ "$imagefile" != "" ] && rm -f $imagefile
[1885]	1730	return 0
[747]	1731	fi
[1796]	1732	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
[747]	1733	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
[1885]	1734	echo "Free space left on image = $free_space KB" >> $LOGFILE
	1735	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
[925]	1736
	1737	# make it bootable
[1998]	1738	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
[747]	1739	mkdir -p $mountpoint/etc
[963]	1740	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
[747]	1741	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
	1742	echo -en "..."
[963]	1743	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
[747]	1744
	1745	if [ "$retval" -eq "0" ] ; then
[1885]	1746	echo -en "...$DONE\n"
[747]	1747	if [ "$KERN_DISK_MADE" ] ; then
[1998]	1748	[ "$imagefile" != "" ] && rm -f $imagefile
[1885]	1749	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
[747]	1750	fi
	1751	else
[1885]	1752	echo -en "...failed\n"
	1753	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
[1998]	1754	[ "$imagefile" != "" ] && rm -f $imagefile
[747]	1755	fi
[963]	1756	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
[747]	1757	return $retval
	1758	}
	1759
	1760
[2006]	1761	ParseModprobeForIncludes() {
	1762	local MODPROBE_CONF mpincfile includes include
	1763
	1764	MODPROBE_CONF=/etc/modprobe.conf
	1765	mpincfile=$1
	1766	touch $mpincfile
	1767	if [ -a $MODPROBE_CONF ]; then
	1768	includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort\|uniq)
	1769	if [ -n "$includes" ]; then
	1770	for include in $includes
	1771	do
	1772	if [ -a "$include" ]; then
	1773	echo $include >> $mpincfile
	1774	fi
	1775	done
	1776	fi
	1777	fi
	1778	}
	1779
	1780
[747]	1781	PrepareDataDiskImages() {
[2006]	1782	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
[747]	1783
[1983]	1784	imagesdir=$MINDI_CACHE
[1902]	1785	rm -f $imagesdir/mindi.iso
[940]	1786	needlist=$MINDI_TMP/what-we-need.txt
	1787	bigdir=$MINDI_TMP/bigdir
[747]	1788	mkdir -p $bigdir/usr/bin
[1983]	1789	mkdir -p $bigdir/usr/sbin
[2006]	1790	includefile=$MINDI_TMP/$$.includefile.txt
[747]	1791
[1885]	1792	lfiles="$DEPLIST_FILE"
	1793	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	1794	ParseModprobeForIncludes $includefile
[2019]	1795	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	1796	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	1797	res=$?
[2006]	1798	rm -f $includefile
[747]	1799	if [ "$YOUR_KERNEL_SUCKS" ]; then
[925]	1800	pwd=`pwd`
[940]	1801	cd $MINDI_TMP
[747]	1802	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
[1914]	1803	tar cf - ./$i 2>> $LOGFILE \| (cd $bigdir ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir"
[747]	1804	done
[925]	1805	for i in $EXTRA_MODS ; do
[1810]	1806	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
	1807	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
[925]	1808	for k in $j ; do
[1989]	1809	tar cf - $k 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
[925]	1810	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
	1811	done
	1812	done
	1813	cd $pwd
[747]	1814	else
[925]	1815	ListKernelModulePaths >> $needlist
[747]	1816	fi
	1817	if [ "$res" -ne "0" ] ; then
[1902]	1818	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	1819	fi
	1820	FindAndAddUserKeyboardMappingFile
	1821	mkdir -p $bigdir/tmp
[1885]	1822	if [ _"$MONDO_SHARE" != _"" ]; then
[940]	1823	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	1824	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
[747]	1825	fi
	1826	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
	1827	DropOptimizedLibraries $needlist $bigdir
	1828	echo -en "Assembling dependency files"
	1829	CopyDependenciesToDirectory < $needlist $bigdir
	1830
[925]	1831	# also copy io.sys and msdos.sys, if we can find them
[747]	1832	for i in `mount \| cut -d' ' -f3` ; do
[925]	1833	for j in io.sys msdos.sys ; do
[963]	1834	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	1835	done
[747]	1836	done
	1837
[925]	1838	# master boot record, too
[940]	1839	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[747]	1840	if [ "$i" ] ; then
[963]	1841	LogIt "Backing up $i's MBR"
[925]	1842	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	1843	sleep 1
	1844	sync
	1845	j=$i
	1846	[ -h "$j" ] && j=`readlink -f $j`
[963]	1847	LogIt "Creating /dev/boot_device ($j)"
[925]	1848	mkdir -p $bigdir/dev
[953]	1849	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	1850	fi
	1851
	1852	old_pwd=`pwd`
	1853	cd $bigdir
	1854
[1983]	1855	# Get terminfo content
	1856	ti="usr/share/terminfo/l"
	1857	if [ -d /$ti ]; then
	1858	mkdir -p $ti
	1859	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while copying terminfo"
[747]	1860	fi
[1764]	1861	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[747]	1862	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
[1335]	1863	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[747]	1864	fi
[1914]	1865	[ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE \| tar xf -
[747]	1866	cd $old_pwd
	1867	echo -e "$DONE"
	1868	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
[940]	1869	MakeMountlist $MINDI_TMP/mountlist.txt
[1902]	1870	mkdir -p $bigdir/tmp
	1871	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	1872	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	1873	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	1874	fi
[2032]	1875	if [ $LVM != "false" ]; then
	1876	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
	1877	if [ "$?" -ne "0" ]; then
	1878	LVM="false"
	1879	rm -f $bigdir/tmp/i-want-my-lvm
	1880	fi
	1881	fi
[1902]	1882	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
	1883	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
	1884	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
	1885	if [ _"$MONDO_SHARE" != _"" ]; then
	1886	for q in filelist.full.gz biggielist.txt ; do
	1887	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	1888	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	1889	done
	1890	fi
	1891
	1892	echo -en "Tarring and zipping the data content..."
	1893	size_of_all_tools=`du -sk $bigdir \| cut -f1`
	1894	(cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null \| gzip -9 > $imagesdir/all.tar.gz)
	1895	du -sk $imagesdir/*gz >> $LOGFILE
	1896	echo -e "$DONE"
	1897
[747]	1898	FRIENDLY_OUTSTRING="Boot and data disk images were created."
[1902]	1899	rm -rf $bigdir
[747]	1900	rm -f $needlist
	1901	}
	1902
	1903
	1904	ProcessLDD() {
[1784]	1905	local incoming f d nd bd bnd
[747]	1906	read incoming
[1784]	1907	while [ "$incoming" != "" ]; do
[859]	1908	# We take the full path name of the dyn. lib. we want
[1526]	1909	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
	1910	for f in $incoming ; do
[1784]	1911	# echo modified file name if one of the parent dir is a link
	1912	# by replacing the original dirname by the destination of the link
	1913	d="`dirname $f`"
	1914	found="false"
	1915	while [ "$d" != "/" ]; do
	1916	if [ -h "$d" ]; then
	1917	nd=`readlink -f $d`
	1918	bd=`basename $d`
	1919	bnd=`basename $nd`
	1920	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
	1921	echo $d
	1922	fi
	1923	d="`dirname $d`"
	1924	done
	1925
[1721]	1926	echo "$f"
	1927	echo "`ReadAllLink $f`"
[747]	1928	done
	1929	read incoming
	1930	done
	1931	}
	1932
	1933
	1934	Prompt() {
	1935	echo -en "$1"
	1936	read line
	1937	}
	1938
	1939
	1940	ReadLine() {
	1941	local i incoming
	1942	read incoming
	1943	i=0
	1944	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	1945	i=$(($i+1))
	1946	read incoming
[747]	1947	done
	1948	echo "$incoming"
	1949	}
	1950
	1951
	1952	SizeOfPartition() {
	1953	local devpath drive res stub
	1954	device=$1
	1955	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	1956	res=`SizeOfRaidPartition $device`
	1957	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	1958	echo "$res"
	1959	return 0
[747]	1960	fi
[925]	1961	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	1962	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	1963	# end patch
[1796]	1964	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
[747]	1965	[ "$res" = "" ] && res="-1"
	1966	echo $res
	1967	return 0
	1968	}
	1969
	1970
	1971	SizeOfRaidPartition() {
	1972	local real_dev smallest_size silly tmp
	1973
	1974	silly=999999999
	1975	smallest_size=$silly
	1976
	1977	for real_dev in `GetRaidDevMembers $1` ; do
[925]	1978	tmp=`SizeOfPartition $real_dev`
	1979	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	1980	done
	1981
	1982	if [ "$smallest_size" = "$silly" ] ; then
[925]	1983	echo "-1"
	1984	return 1
[747]	1985	else
[925]	1986	echo "$smallest_size"
	1987	return 0
[747]	1988	fi
	1989	}
	1990
	1991
	1992	StripComments()
	1993	{
	1994	local tempfile
[925]	1995
[940]	1996	tempfile=$MINDI_TMP/$$.strip.txt
[963]	1997	cp -f $1 $tempfile 2>> $LOGFILE
[747]	1998	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
	1999	rm -f $tempfile
	2000	echo "Stripped comments from $2" >> $LOGFILE
	2001	}
	2002
	2003
[925]	2004
[747]	2005	StripExecutable()
	2006	{
	2007	local tmpfile
[925]	2008
[940]	2009	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2010	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2011	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2012	strip $tmpfile 2> /dev/null
	2013	if [ "$?" -eq "0" ] ; then
[963]	2014	cp -f $tmpfile $1 2>> $LOGFILE
[925]	2015	echo "Stripped binary $2" >> $LOGFILE
[747]	2016	fi
	2017	rm -f $tmpfile
	2018	}
	2019
	2020
	2021	TryToFindKernelPath() {
	2022	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
[925]	2023
[747]	2024	we_want_version=`uname -r`
	2025	possible_kernels=""
	2026	duff_kernels=""
	2027
	2028	if [ "$ARCH" = "ia64" ] ; then
	2029	root="/boot/efi/efi"
	2030	else
	2031	root="/"
	2032	fi
[1466]	2033	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
[925]	2034	[ ! -e "$fname" ] && continue
[747]	2035	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[925]	2036	file $fname \| grep -q gzip
	2037	if [ "$?" -eq "0" ] ; then
	2038	# Used by ia64
[747]	2039	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2040	else
[747]	2041	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
[925]	2042	fi
[747]	2043	[ "$fkern_ver" = "" ] && continue
	2044	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2045	[ -f "$fname" ] \|\| continue
	2046	[ -h "$fname" ] && continue
	2047	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2048	file $fname \| grep -q gzip
	2049	if [ "$?" -eq "0" ] ; then
	2050	# Used by ia64
	2051	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2052	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2053	duff_kernels="$fname $duff_kernels"
	2054	else
[747]	2055	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2056	possible_kernels="$fname $possible_kernels"
[925]	2057	fi
[747]	2058	else
[925]	2059	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[963]	2060	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2061	duff_kernels="$fname $duff_kernels"
	2062	else
[747]	2063	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2064	possible_kernels="$fname $possible_kernels"
[925]	2065	fi
[747]	2066	fi
	2067	done
	2068	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[925]	2069	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
[747]	2070	fi
	2071	if [ ! "$possible_kernels" ] ; then
[963]	2072	LogIt "No kernel matches exactly. Are there any duff kernels?"
[747]	2073	possible_kernels="$duff_kernels"
	2074	if [ ! "$possible_kernels" ] ; then
[963]	2075	LogIt "Sorry, no duff kernels either"
[747]	2076	else
[963]	2077	LogIt "I bet you're running Debian or Gentoo, aren't you?"
	2078	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
[747]	2079	fi
	2080	fi
	2081	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
	2082	noof_kernels=`CountItemsIn "$possible_kernels"`
	2083	if [ "$noof_kernels" -eq "0" ] ; then
[963]	2084	LogIt "Could not find your kernel."
[925]	2085	if [ -e "/boot/vmlinuz" ] ; then
[963]	2086	LogIt "Using /boot/vmlinuz as a last resort."
[925]	2087	output=/boot/vmlinuz
[747]	2088	else
[925]	2089	output=""
	2090	fi
[747]	2091	elif [ "$noof_kernels" -eq "1" ] ; then
	2092	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
	2093	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
	2094	output="$kernelpath"
	2095	else
	2096	for i in $possible_kernels ; do
	2097	if echo $i \| grep "`uname -r`" ; then
[925]	2098	LogIt "OK, I used my initiative and found that "
[963]	2099	LogIt "$i is probably your kernel. "
[925]	2100	output="$i"
	2101	return
	2102	fi
[747]	2103	done
[925]	2104	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
	2105	output=/boot/vmlinuz
	2106	echo "Schlomo, this one's for you." >> $LOGFILE
	2107	else
[963]	2108	LogIt "Two or more possible kernels found. You may specify any one of them and the "
	2109	LogIt "boot disks will still work, probably. If one does not work, try another."
	2110	LogIt "$possible_kernels"
[747]	2111	echo ""
[925]	2112	fi
[747]	2113	fi
	2114	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
	2115	}
	2116
	2117
	2118	TurnTgzIntoRdz() {
[1983]	2119	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
[925]	2120
[747]	2121	tgz_dir_fname=$1
	2122	rdz_fname=$2
[1983]	2123	kernelsize=$3
[1885]	2124	maxsize=$(($BOOT_SIZE-$kernelsize))
[747]	2125	maxsize=$(($maxsize*2)); # to allow for compression of 50%
[940]	2126	tempfile=$MINDI_TMP/temp.rd
	2127	mountpoint=$MINDI_TMP/mnt1
[747]	2128	res=0
	2129	echo -en "..."
	2130	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
	2131	echo -en "..."
[1764]	2132	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
	2133	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
[747]	2134	echo -en "..."
	2135	mkdir -p $mountpoint
	2136	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2137	echo -en "..."
	2138	old_pwd=`pwd`
	2139	cd $mountpoint
[2034]	2140
	2141	# AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
	2142	[ -h "/lib64" ] && (mkdir -p lib ; ln -s lib lib64) \|\| LogIt "/lib64 is a symbolic link, but I couldn't create in $mountpoint."
	2143
[959]	2144	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
[747]	2145	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
[1914]	2146
[747]	2147	cd dev \|\| Die "Can't cd to dev"
	2148	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
	2149	rm -f dev-entries.tgz
	2150	cd ..
	2151
	2152	for w in insmod.static insmod.static.old ; do
[925]	2153	s=`which $w 2> /dev/null`
	2154	if [ -e "$s" ] ; then
[1913]	2155	tar cf - $s 2> /dev/null \| tar xf -
[925]	2156	fi
[747]	2157	done
	2158
	2159	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[1724]	2160
[1882]	2161	# Handle the case where busybox and mount are dynamically linked
[1786]	2162	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
	2163	if [ $? -eq 0 ]; then
[1927]	2164	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
	2165	rm -f bin/mount $MINDI_TMP/busy.lis
	2166	mountlis=`grep mount $DEPLIST_FILE`
	2167	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
	2168	if [ -f $f ]; then
	2169	LocateDeps $f >> $MINDI_TMP/busy.lis
	2170	fi
	2171	done
	2172	tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null \| tar xf -
[1786]	2173	rm -f $MINDI_TMP/busy.lis
	2174	fi
	2175
[1914]	2176	mkdir -p $mountpoint/tmp
[1724]	2177	# Management of udev (which includes modprobe in rules)
[1759]	2178	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2179	if [ $? -eq 0 ]; then
[1914]	2180	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
[1759]	2181	LogIt "udev device manager found"
[1913]	2182	tar cf - /etc/udev 2> /dev/null \| tar xf -
[1790]	2183	# This avoids NIC remapping if on another machine at restore time on Debian at least
	2184	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
[1913]	2185	tar cf - /lib*/udev 2> /dev/null \| tar xf -
[1720]	2186	if [ -x /sbin/udevd ]; then
[1781]	2187	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
	2188	lis=""
	2189	# Get only the files which exist in that list
[1815]	2190	# and potentially their symlink structure
[1781]	2191	for i in $lis2; do
[1815]	2192	if [ -h $i ]; then
	2193	j=$i
	2194	while [ -h $j ]; do
	2195	lis="$lis $j"
	2196	j=`readlink $j`
	2197	done
	2198	lis="$lis $j"
	2199	elif [ -f $i ]; then
[1781]	2200	lis="$lis $i"
	2201	fi
	2202	done
	2203	# And their deps
[1759]	2204	LocateDeps $lis > $MINDI_TMP/udev.lis
	2205	for i in $lis; do
	2206	if [ "`echo $i \| cut -c1`" = "/" ]; then
	2207	j=`echo $i \| cut -c2-`
[1998]	2208	[ "$j" != "" ] && rm -f $j
[1759]	2209	fi
	2210	done
[1913]	2211	tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null \| tar xf -
[1721]	2212	rm -f $MINDI_TMP/udev.lis
[1720]	2213	else
	2214	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
[1724]	2215	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
[1914]	2216	rm -f $mountpoint/tmp/USE-UDEV
[1720]	2217	fi
[1716]	2218	fi
[1786]	2219
[1761]	2220	# Management of potential HW info (Proliant only at the moment)
[1880]	2221	rm -rf $MINDI_CACHE/bkphw
	2222	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2223	if [ -d $MINDI_CACHE/bkphw ]; then
[1761]	2224	LogIt "Hardware Information found and saved ..."
[1880]	2225	cp -rp $MINDI_CACHE/bkphw .
	2226	if [ -f $MINDI_CACHE/tools.files ]; then
	2227	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2228	LocateDeps $lis > $MINDI_TMP/tools.lis
[1913]	2229	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null \| tar xf -
[1863]	2230	fi
[1880]	2231	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
	2232	mv -f $MINDI_CACHE/mindi-rsthw .
[1761]	2233	chmod 755 ./mindi-rsthw
	2234	fi
[1880]	2235	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2236	fi
	2237
[1885]	2238	for w in cdrom groovy-stuff ; do
[747]	2239	mkdir -p mnt/$w
	2240	done
	2241
[1913]	2242	tar cf - /dev/fd0[1,2][4,7,8] 2> /dev/null \| tar xf -
[1721]	2243
[747]	2244	cd $old_pwd
	2245	echo -en "..."
	2246	old_pwd=`pwd`
	2247	if [ "$YOUR_KERNEL_SUCKS" ] ; then
[940]	2248	cd $MINDI_TMP
[1885]	2249	needed_modules_path=lib/modules/$FAILSAFE_KVER
[747]	2250	else
	2251	cd /
	2252	if [ "${kernelname}" != "" ]
	2253	then
[1885]	2254	needed_modules_path=lib/modules/${kernelname}
[747]	2255	else
[1885]	2256	needed_modules_path=lib/modules/`uname -r`
[747]	2257	fi
	2258	fi
[1885]	2259
	2260	needed_modules=""
[1993]	2261	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2262
[940]	2263	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
[747]	2264	# For PXE boot
	2265	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2266	fi
[1715]	2267	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
	2268	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
	2269	fi
[1727]	2270	for i in $DENY_MODS; do
	2271	echo "Removing $i from the list of modules to load" >> $LOGFILE
	2272	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2273	done
	2274
[1885]	2275	[ -e "$needed_modules_path" ] \|\| LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
[747]	2276	for i in $list_of_groovy_mods ; do
[1885]	2277	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
[747]	2278	done
[1914]	2279
[1885]	2280	for i in $needed_modules ; do
[747]	2281	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
[940]	2282	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
[747]	2283	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
[1913]	2284	tar cf - $i 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy $i to $mountpoint"
[1914]	2285	# Uncompress modules if not using udev and native modprobe
[1815]	2286	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
	2287	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
[1914]	2288	echo "Uncompressing $i" >> $LOGFILE
[1727]	2289	gunzip -f $mountpoint/$i
[1815]	2290	fi
[1727]	2291	fi
[747]	2292	done
[1815]	2293
	2294	# Also copy modules.dep in case of udev so that normal modprobe works
[1913]	2295	tar cf - /$needed_modules_path/modules.dep 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy modules.dep to $mountpoint"
[1815]	2296
[1885]	2297	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
[747]	2298	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
	2299	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
	2300	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
	2301	rm -f $mountpoint/sbin/devfsd
	2302	fi
	2303	cd $old_pwd
	2304	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
	2305	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
	2306	rm -f $mountpoint/zero
[1885]	2307	if [ _"$MONDO_SHARE" != _"" ]; then
[747]	2308	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
[940]	2309	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
[953]	2310	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
[747]	2311	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
	2312	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
	2313	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
[998]	2314	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
[747]	2315	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
	2316	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
	2317	fi
	2318	mkdir -p $mountpoint/proc
[1885]	2319	echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
[1230]	2320	# Determine what filesystem to use for initrd image
	2321	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
	2322	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2323	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
	2324	case "$gvFileSystem" in
	2325	"ext2fs")
	2326	# say what will be used
[1821]	2327	echo "Creating an ext2 initrd image..." >> $LOGFILE
[1230]	2328	# kernel expects linuxrc in ext2 filesystem
	2329	( cd $mountpoint && ln -sf sbin/init linuxrc )
	2330	# unmount loop filesystem and create image file using the standard approach
	2331	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[1764]	2332	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
[1794]	2333	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
[1764]	2334	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	2335	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[1764]	2336	rm -f ${rdz_fname}.tmp
[1230]	2337	# log that we are done
[1821]	2338	echo "...done." >> $LOGFILE
[1230]	2339	;;
	2340	"initramfs")
	2341	# say what will be used
[1821]	2342	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
[1230]	2343	# make sure that cpio is there
	2344	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	2345	# go into filesystem
	2346	cd $mountpoint
	2347	# kernel expects init in cpio filesystem
	2348	ln -sf sbin/init init
	2349	# create cpio image file and unmount loop filesystem
[1929]	2350	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
[1230]	2351	cd $old_pwd
	2352	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
	2353	# log that we are done
	2354	echo "...done." >> $LOGFILE
	2355	;;
	2356	*)
	2357	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
	2358	;;
	2359	esac
[747]	2360	if [ "$res" -eq "0" ] ; then
	2361	echo -en "..."
	2362	else
	2363	echo -en "\rMade an rdz WITH ERRORS. \n"
	2364	fi
	2365	return 0
	2366	}
	2367
	2368
	2369	##############################################################################
[1021]	2370	#----------------------------------- Main -----------------------------------#
[747]	2371	##############################################################################
	2372
[1885]	2373	# Now we can create what we need
	2374	mkdir -p $MINDI_TMP
[747]	2375
[1885]	2376	# Purge from potential old run
	2377	if [ _"$MINDI_CACHE" = _"" ]; then
	2378	Die "MINDI_CACHE undefined"
	2379	fi
	2380	rm -rf $MINDI_CACHE/* 2> /dev/null
	2381	mkdir -p $MINDI_CACHE
	2382
	2383	if [ "$1" = "--printvar" ] ; then
	2384	shift
	2385	if [ _"$1" != _"" ] ; then
	2386	set \| grep -Ew "^$1" \| cut -d= -f2
	2387	fi
	2388	MindiExit 0
	2389	fi
	2390
[747]	2391	> $LOGFILE
	2392	echo "mindi v$MINDI_VERSION" >> $LOGFILE
	2393	echo "$ARCH architecture detected" >> $LOGFILE
	2394	echo "mindi called with the following arguments:" >> $LOGFILE
	2395	echo "$@" >> $LOGFILE
[800]	2396	echo "Start date : `date`" >> $LOGFILE
[1684]	2397	echo "-----------------------------" >> $LOGFILE
[747]	2398
	2399	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
	2400
[1010]	2401	# Log some capital variables
	2402	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[1885]	2403	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
[1010]	2404	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
	2405	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
	2406	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
	2407	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
[1885]	2408	if [ -f $MINDI_CONFIG ]; then
	2409	echo "-----------------------------" >> $LOGFILE
	2410	echo " Mindi configuration file " >> $LOGFILE
	2411	echo "-----------------------------" >> $LOGFILE
	2412	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
	2413	echo "-----------------------------" >> $LOGFILE
	2414	fi
[1010]	2415
[1885]	2416
[747]	2417	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	2418
	2419	# Sanity checks
	2420	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	2421	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	2422	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	2423	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	2424	if which awk &> /dev/null ; then
	2425	if ! which gawk &> /dev/null ; then
	2426	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
	2427	fi
	2428	fi
	2429	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
	2430	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
	2431
[747]	2432	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	2433
	2434	# Update the PATH variable if incomplete
	2435	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	2436	PATH=$PATH:/sbin:/usr/sbin
	2437	export PATH
	2438	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
	2439	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
	2440	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
	2441	fi
	2442
[1885]	2443	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2444	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
	2445	source $MINDI_LIB/FindDistroFailsafe
	2446	# Log kernel image
	2447	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2448	else
	2449	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
	2450	fi
[1010]	2451
[1737]	2452	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[1010]	2453	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
	2454	fi
	2455
[925]	2456	### BERLIOS
[747]	2457	### Fix as it's not mandatory on ia64
	2458	if [ "$ARCH" = "ia64" ] ; then
[1010]	2459	if which elilo &> /dev/null ; then
	2460	LILO_EXE=elilo
	2461	else
[2024]	2462	LILO_EXE=`which false 2> /dev/null`
[1010]	2463	fi
[747]	2464	else
	2465	FindIsolinuxBinary
	2466	fi
	2467	trap "Aborted" SIGTERM
	2468	DONE="\r\t\t\t\t\t\t\t\tDone. "
	2469	kernelpath=""
[1010]	2470	MONDO_ROOT=/var/cache/mondo
[747]	2471	mkdir -p $MONDO_ROOT
	2472
	2473	if [ -d "/proc/lvm" ]; then
	2474	# LVM v1
	2475	LVMCMD=""
	2476	LVM="v1"
	2477	elif [ -d "/dev/mapper" ]; then
	2478	# LVM v2
	2479	LVMCMD="lvm"
	2480	LVM="v2"
	2481	else
	2482	LVM="false"
	2483	fi
[1021]	2484	echo "LVM set to $LVM" >> $LOGFILE
	2485	echo "----------" >> $LOGFILE
[1230]	2486	echo "mount result:" >> $LOGFILE
	2487	echo "-------------" >> $LOGFILE
	2488	mount >> $LOGFILE
	2489	echo "-------------" >> $LOGFILE
[1315]	2490	if [ -e /etc/raidtab ]; then
	2491	echo "-------------" >> $LOGFILE
	2492	echo "/etc/raidtab content:" >> $LOGFILE
	2493	echo "-------------" >> $LOGFILE
	2494	cat /etc/raidtab >> $LOGFILE
	2495	fi
	2496	echo "-------------" >> $LOGFILE
[1418]	2497	echo "cat /proc/cmdline:" >> $LOGFILE
	2498	echo "-------------" >> $LOGFILE
	2499	cat /proc/cmdline >> $LOGFILE
	2500	echo "-------------" >> $LOGFILE
[2014]	2501	echo "cat /proc/swaps:" >> $LOGFILE
	2502	echo "-------------" >> $LOGFILE
	2503	cat /proc/swaps >> $LOGFILE
	2504	echo "-------------" >> $LOGFILE
[2015]	2505	echo "cat /proc/partitions:" >> $LOGFILE
	2506	echo "-------------" >> $LOGFILE
	2507	cat /proc/partitions >> $LOGFILE
	2508	echo "-------------" >> $LOGFILE
	2509	echo "cat /proc/filesystems:" >> $LOGFILE
	2510	echo "-------------" >> $LOGFILE
	2511	cat /proc/filesystems >> $LOGFILE
	2512	echo "-------------" >> $LOGFILE
[1021]	2513	echo "lsmod result:" >> $LOGFILE
	2514	echo "-------------" >> $LOGFILE
	2515	lsmod >> $LOGFILE
[1399]	2516	MODULES="`cat /proc/modules \| awk '{print $1}'`"
[1531]	2517	if [ -x /usr/sbin/esxcfg-module ]; then
[1797]	2518	echo "-------------" >> $LOGFILE
[1497]	2519	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
	2520	echo "-------------" >> $LOGFILE
	2521	echo "VMWare modules" >> $LOGFILE
	2522	echo "-------------" >> $LOGFILE
[1531]	2523	/usr/sbin/esxcfg-module -l >> $LOGFILE
[1764]	2524	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
[1497]	2525	fi
[1851]	2526	echo "FORCE_MODS:" >> $LOGFILE
[1021]	2527	echo "-------------" >> $LOGFILE
[1851]	2528	echo $FORCE_MODS >> $LOGFILE
[1882]	2529	echo "-------------" >> $LOGFILE
[1851]	2530	echo "DENY_MODS:" >> $LOGFILE
	2531	echo "-------------" >> $LOGFILE
	2532	echo $DENY_MODS >> $LOGFILE
	2533	echo "-------------" >> $LOGFILE
[1796]	2534	echo "df result:" >> $LOGFILE
[1785]	2535	echo "----------" >> $LOGFILE
[1796]	2536	df -T >> $LOGFILE
[1785]	2537	echo "-------------" >> $LOGFILE
[1230]	2538	echo "Liste of extra modules is:" >> $LOGFILE
	2539	echo "$EXTRA_MODS" >> $LOGFILE
	2540	echo "-------------" >> $LOGFILE
[747]	2541
[1723]	2542	# Compute libata version
[1797]	2543	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	2544	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	2545	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	2546	if [ "$laver" = "2" ]; then
[1726]	2547	DENY_MODS="$DENY_MODS ide-generic"
[1727]	2548	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
[1726]	2549	echo "-------------" >> $LOGFILE
	2550	fi
[1723]	2551	fi
	2552
[747]	2553	FLOPPY_WAS_MOUNTED=""
	2554	for mtpt in /media/floppy /mnt/floppy /floppy ; do
	2555	if mount \| grep -w $mtpt &> /dev/null ; then
	2556	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
	2557	umount $mtpt
	2558	fi
	2559	done
	2560
[1684]	2561	#
	2562	# If we have a USB device we need to store info
	2563	# and remove it from the parameters line
	2564	#
[747]	2565	if [ "$#" -ne "0" ] ; then
[1684]	2566	if [ "$1" = "--usb" ] ; then
	2567	shift
	2568	USBDEVICE=$1
	2569	if [ _"$USBDEVICE" = _"" ]; then
	2570	Die "No USB device specified"
	2571	fi
	2572	shift
	2573	fi
	2574	fi
	2575
	2576	if [ "$#" -ne "0" ] ; then
[747]	2577	if [ "$1" = "--findkernel" ] ; then
	2578	res=`TryToFindKernelPath`
[1336]	2579	# Avoids logfile content for mondo
	2580	export MONDO_SHARE=""
[747]	2581	if [ "$res" = "" ] ; then
[925]	2582	MindiExit -1
[747]	2583	else
	2584	echo "$res"
[925]	2585	MindiExit 0
[747]	2586	fi
[1720]	2587	elif [ "$1" = "--locatedeps" ] ; then
	2588	[ ! "$2" ] && Die "Please specify the binary to look at"
	2589	LocateDeps $2
	2590	# Avoids logfile content for mondo
	2591	export MONDO_SHARE=""
	2592	MindiExit $?
[1815]	2593	elif [ "$1" = "--readalllink" ] ; then
	2594	[ ! "$2" ] && Die "Please specify the binary to look at"
	2595	ReadAllLink $2
	2596	# Avoids logfile content for mondo
	2597	export MONDO_SHARE=""
	2598	MindiExit $?
[747]	2599	elif [ "$1" = "--makemountlist" ] ; then
	2600	[ ! "$2" ] && Die "Please specify the output file"
	2601	MakeMountlist $2
[1336]	2602	# Avoids logfile content for mondo
	2603	export MONDO_SHARE=""
[925]	2604	MindiExit $?
	2605	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	2606	echo "Mindi v$MINDI_VERSION"
[1336]	2607	# Avoids logfile content for mondo
	2608	export MONDO_SHARE=""
[925]	2609	MindiExit 0
[747]	2610	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	2611	MONDO_TMP=$2
	2612	# Change MINDI_TMP for the one provided by mondo
	2613	# So that it can get back the built files
[1010]	2614	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
	2615	rmdir $MINDI_TMP
[1486]	2616	export MINDI_TMP=$MONDO_TMP
[953]	2617	mkdir -p $MINDI_TMP
[1696]	2618	# This is the scratch dir in mondo - subdir images
[1880]	2619	MINDI_CACHE=$3
	2620	if [ _"$MINDI_CACHE" != _"" ]; then
	2621	mkdir -p $MINDI_CACHE
[938]	2622	fi
[925]	2623	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[747]	2624	###
	2625	### Sq-Modification...
	2626	### Attempt to locate kernel specific module path
	2627	### if module path is found then use it other wise use uname -r to set it...
	2628	###
	2629	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
[963]	2630	LogIt "kernelname = $kernelname"
	2631	LogIt "kernelpath = $kernelpath"
[747]	2632	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2633	then
[963]	2634	LogIt "Module path for ${kernelpath} not found..."
	2635	LogIt "using running kernel\'s modules."
[747]	2636	kernelname=`uname -r`
	2637	else
[963]	2638	LogIt "Using modules for kernel: ${kernelname}"
[747]	2639	fi
	2640	###
	2641	### end of Sq-Modification
	2642	###
[925]	2643	TAPEDEV=$5
	2644	TAPESIZE=$6
	2645	FILES_IN_FILELIST=$7
	2646	USE_LZO=$8
	2647	CDRECOVERY=$9
[747]	2648	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	2649	IMAGE_DEVS=""
	2650	else
	2651	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	2652	fi
[925]	2653	if [ "${11}" ] ; then
	2654	LILO_OPTIONS=""
	2655	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
	2656	fi
	2657	LAST_FILELIST_NUMBER=${12}
[747]	2658	ESTIMATED_TOTAL_NOOF_SLICES=${13}
	2659	EXCLUDE_DEVS="${14}"
	2660	USE_COMP="${15}"
	2661	USE_LILO="${16}"
[925]	2662	USE_STAR="${17}"
	2663	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	2664	DIFFERENTIAL="${19}"
[998]	2665	USE_GZIP="${20}"
	2666	NOT_BOOT="${21}"
[747]	2667	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	2668	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[747]	2669	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[963]	2670	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
[925]	2671	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
[747]	2672	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
	2673	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
	2674	then
[963]	2675	LogIt "Module path for ${kernelpath} not found..."
	2676	LogIt "using running kernel\'s modules."
[747]	2677	kernelname=`uname -r`
	2678	else
[963]	2679	LogIt "Using modules for kernel: ${kernelname}"
[747]	2680	fi
[925]	2681	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
[1696]	2682	# MONDO_ROOT is the real scratchdir
[1880]	2683	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	2684	if [ _"$MONDO_ROOT" != _"" ]; then
	2685	mkdir -p $MONDO_ROOT
	2686	else
	2687	Die "MONDO_ROOT is undefined"
	2688	fi
[747]	2689	else
[925]	2690	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
	2691	MindiExit -1
[747]	2692	fi
	2693	fi
	2694	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	2695
[1684]	2696	if [ _"$MONDO_SHARE" = _"" ]; then
[963]	2697	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
	2698	LogIt "Latest Mindi is available from http://www.mondorescue.org"
	2699	LogIt "BusyBox sources are available from http://www.busybox.net"
[747]	2700	LogIt "------------------------------------------------------------------------------"
	2701	else
[1315]	2702	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
[747]	2703	fi
[1005]	2704	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
	2705	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
	2706	else
	2707	LogIt "Unable to find mindi-busybox, please install it"
	2708	MindiExit -1
	2709	fi
[747]	2710
	2711	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
	2712	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
	2713	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
	2714	insmod $i >> $LOGFILE 2>> $LOGFILE
	2715	done
	2716
	2717	KERN_DISK_MADE=""
	2718
	2719	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
	2720	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
	2721	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
	2722	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[963]	2723	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
[940]	2724	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
	2725	MakeMountlist $MINDI_TMP/mountlist.txt
	2726	mkdir -p $MINDI_TMP/small-all/tmp
	2727	cd $MINDI_TMP/small-all
[953]	2728	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
[1913]	2729	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
[747]	2730	sleep 2
[963]	2731	LogIt "Done. Exiting."
[925]	2732	MindiExit 0
[747]	2733	fi
	2734
[1690]	2735	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1684]	2736	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
	2737	fi
	2738
[747]	2739	if [ "$kernelpath" = "" ] ; then
[1335]	2740	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[966]	2741	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
	2742	read ch
	2743	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
	2744	USE_OWN_KERNEL="yes"
[1809]	2745	else
	2746	USE_OWN_KERNEL="no"
[747]	2747	fi
	2748	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	2749	YOUR_KERNEL_SUCKS=""
	2750	kernelpath=`TryToFindKernelPath`
	2751	if [ "$kernelpath" = "" ] ; then
	2752	echo -n "Please enter kernel path : "
	2753	read kernelpath
	2754	fi
[747]	2755	else
[925]	2756	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
[747]	2757	fi
	2758	fi
	2759	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
[1885]	2760	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
	2761	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
	2762	source $MINDI_LIB/FindDistroFailsafe
	2763	# Log kernel image
	2764	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
	2765	kernelpath="$FAILSAFE_KBIN"
	2766	LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
	2767	LogIt "The failsafe kernel is $kernelpath.\n"
	2768	LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
	2769	LogIt "disks then it may still be a result of a problem with your kernel.\n"
	2770	pwd=`pwd`
	2771	cd $MINDI_TMP
	2772	mkdir -p lib/modules
	2773	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
	2774	cd $pwd
	2775	else
	2776	kernelpath=$MINDI_LIB/vmlinuz
	2777	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
	2778	LogIt "However, you are still running your kernel. If Mindi fails to create your"
	2779	LogIt "disks then it may still be a result of a problem with your kernel."
	2780	pwd=`pwd`
	2781	cd $MINDI_TMP
	2782	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
	2783	cd $pwd
	2784	fi
[747]	2785	YOUR_KERNEL_SUCKS="Your kernel sucks"
	2786	fi
[1880]	2787	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[963]	2788	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
[747]	2789
[965]	2790	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
[747]	2791
[1983]	2792	PrepareDataDiskImages
	2793
[747]	2794	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
	2795	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
[1983]	2796	export ramdisk_size=$rds
[747]	2797
	2798	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
[1567]	2799	if [ "$ARCH" = "ia64" ] ; then
[1983]	2800	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
[1567]	2801	else
[1983]	2802	PrepareBootDiskImage_SYSLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size MB disk image."
[747]	2803	fi
	2804
	2805	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
	2806	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
	2807
[1684]	2808	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	2809	ListImagesForUser
	2810	OfferToMakeBootableISO
[1684]	2811	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	2812	OfferToMakeBootableUSB
[1684]	2813	fi
[963]	2814	LogIt "Finished."
[747]	2815	elif [ "$TAPEDEV" ] ; then
[1901]	2816	rm -f $MINDI_CACHE/{img,iso}
[1898]	2817	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	2818	OfferToMakeBootableUSB
[1898]	2819	fi
[1983]	2820	OfferToMakeBootableISO
[1880]	2821	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	2822	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	2823	else
[925]	2824	Die "Cannot find all.tar.gz, to be written to tape"
[747]	2825	fi
[1695]	2826	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	2827	OfferToMakeBootableUSB
[747]	2828	else
[1983]	2829	OfferToMakeBootableISO
[747]	2830	fi
	2831	# cleanup
[963]	2832	LogIt "$FRIENDLY_OUTSTRING"
[747]	2833	for mtpt in $FLOPPY_WAS_MOUNTED ; do
	2834	mount $mtpt
	2835	done
[925]	2836	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: