Context Navigation

source: MondoRescue/branches/2.2.5/mindi/mindi@ 1824

Visit:

Last change on this file since 1824 was 1824, checked in by Bruno Cornec, 16 years ago
Some VMWare support improvements (however, it seems that VMWare support won't be possible anytime soon) during init at restore time, copy all static evices availble for udev, as some distro implementation are not yet supported correctly for udev. Not very elegant, but should solve our current issues
Property svn:keywords set to `Rev Id`
File size: 125.3 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 1824 2007-11-29 00:12:14Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-floppy boot/root kit. The first floppy is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17
18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20	#RUN_AFTER_INITIAL_BOOT_PHASE="echo \"Who lives in a pineapple under the sea?\" > /tmp/spongebob.squarepants.txt"
21	# after booting from floppy/CD image but before
22	# accessing auxiliary data disks (or the rest of
23	# the CD), the initscript will run the above command.
24
25	RUN_AFTER_BOOT_PHASE_COMPLETE="ide-opt"
26	# after the emergency boot process is complete but
27	# before the init script runs mondorestore, it will
28	# run this command.
29
30	MINDI_REV=PBREV
31	MINDI_VER=PBVER
32
33	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
34	MINDI_PREFIX=XXX
35	MINDI_CONF=YYY
36	MINDI_SBIN=${MINDI_PREFIX}/sbin
37	MINDI_LIB=LLL
38
39	# Temporary directory for mindi
40	TMPDIR=/tmp
41
42	EXTRA_SPACE=32768 # increase if you run out of ramdisk space
43	BOOT_SIZE=16384 # size of the boot disk
44	MAX_DISKS=99
45	WRITE_BOOT_FLOPPIES="yes" # do you want to be propted to write floppy images
46	PROMPT_WRITE_BOOT_FLOPPIES="yes"
47	# do you want to be prompted to write
48	# floppy images out to floppy disks?
49	# if 'no', images will not be written to floppies
50
51	PROMPT_MAKE_CD_IMAGE="yes"
52	# Ask if you want to make a CD Image to be written?
53	# if this is set to 'no', then the image will be created automatically
54
55	PROMPT_MAKE_USB_IMAGE="yes"
56	# Ask if you want to make a USB Image to be written?
57	# if this is set to 'no', then the image will be created automatically
58
59	USE_OWN_KERNEL="yes"
60	# If set to "no", you will be prompted for whether or not
61	# you want to use your own kernel, or the supplied default.
62	# If "yes" mindi will automatically use your own kernel.
63
64	MY_FSTAB=/etc/fstab
65	FLOPPY_MODS="ide-floppy floppy"
66	TAPE_MODS="ht st osst ide-tape ide_tape"
67	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs"
68
69	# ide-probe-mod
70	IDE_MODS="ide ide-generic ide-detect ide-mod ide-disk ide-cd ide_cd ide-cs ide-core ide_core edd paride ata_generic ata_piix libata via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell"
71	PCMCIA_MODS="pcmcia_core ds yenta_socket"
72	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual"
73	CDROM_MODS="$TAPE_MODS $FLOPPY_MODS $IDE_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_cp437 sg sr_mod zlib_inflate $USB_MODS $PCMCIA_MODS"
74	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet"
75	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm-snapshot dm-zero dm-mirror jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
76	# Replace with that line for HP OCMP e.g.
77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams"
78	DENY_MODS=""
79	# Force some modules to be included
80	FORCE_MODS=""
81
82	LOGFILE=/var/log/mindi.log
83	FDDEVICE=/dev/fd0 ; # 1.44MB floppy #0
84	CACHE_LOC=/var/cache/mindi
85	FORCE_DUAL_FLOPPIES=no
86	BOOT_MEDIA_MESSAGE="\
87	To format and restore all files automatically, type 'nuke' <enter>.\n\
88	To restore some/all files interactively, type 'interactive' <enter>.\n\
89	To compare the archives with your filesystem, type 'compare' <enter>.\n\
90	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
91	You may add one or more of the following parameters as well:-\n\n\
92	donteject - mondorestore will not eject the CD; this is useful if, for\n\
93	instance, your PC's case has a concealed CD-ROM drive\n\
94	noresize - your mountlist will not be adjusted to use your unallocated\n\
95	hard disk space\n\
96	textonly - do not call any Newt library routines; this is unattractive\n\
97	but valuable if you find your Newt library has bugs in it\n\n\
98	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
99	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
100	"
101	FDISK=$MINDI_SBIN/parted2fdisk
102
103	# Using a config file allow to overwrite some values
104	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
105	if [ -f $MINDI_CONFIG ]; then
106	. $MINDI_CONFIG
107	fi
108
109	# Now we can create what we need
110	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
111	mkdir -p $MINDI_TMP
112
113	# Purge from potential old run
114	rm -rf $CACHE_LOC/* 2> /dev/null
115	mkdir -p $CACHE_LOC
116	# ----------------------------------------------------------------------------
117
118
119	AbortHere() {
120	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
121	Die "Program is terminating in response to signal received from OS/user"
122	}
123
124
125	HackSyslinuxFile() {
126	local incoming
127	incoming=`ReadLine`
128	while [ "$incoming" ] ; do
129	echo -en "$incoming" \| sed s/24000/$1/
130	if [ "`echo "$incoming" \| grep append`" ] ; then
131	echo -en " $ADDITIONAL_BOOT_PARAMS"
132	fi
133	echo -en "\n"
134	incoming=`ReadLine`
135	done
136	if [ -e "$MINDI_LIB/memtest.img" ] ; then
137	echo -en "label memtest\n kernel memdisk\n append initrd=memtest.img\n\n"
138	fi
139	}
140
141
142	Aborted() {
143	trap SIGHUP SIGTERM SIGTRAP SIGINT
144	[ "$CACHE_LOC" != "" ] && rm -f $CACHE_LOC/mindiimg $CACHE_LOC/gz $CACHE_LOC/mindi.iso
145	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
146	Die "User abort."
147	}
148
149
150	AddFileToCfgIfExists() {
151	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
152	}
153
154
155	AddFileToDir() {
156	local filename minidir_root noof_disks diskno res filesize would_occupy zipsize complevel cutoff compressed_fname siz
157	filename=$1
158	minidir_root=$2
159	noof_disks=$3
160
161	diskno=$noof_disks
162	mkdir -p $minidir_root/$diskno
163	[ "$LAST_COMPRESSED_SIZE" = "" ] && LAST_COMPRESSED_SIZE=0
164	if [ ! -e "$filename" ] ; then
165	if [ -h "$filename" ] ; then
166	cp --parents -pRdf $filename $minidir_root/$diskno 2>> $LOGFILE
167	return $noof_disks
168	else
169	Die "AddFileToDir asked me to add $filename, which does not exist. Oops! Did you run out of disk space or is your Linux distro severely broken?"
170	fi
171	fi
172
173	# move to the disk that has room on it (or end up using the last, if all full)
174	while [ "$diskno" -lt $MAX_DISKS ] ; do
175	mkdir -p $minidir_root/$diskno
176	filesize=`du -sk $filename \| cut -f1`
177	cp --parents -Rdf $filename $minidir_root/$diskno 2>> $LOGFILE
178	if [ "$filesize" -le "4" ] ; then
179	siz=$filesize
180	elif [ ! -f "$filename" ] ; then
181	siz=0
182	else
183	siz=`grep -m 1 "$filename.gz$" $minidir_root/compressed/compressed.txt \| cut -f1`
184	[ "$siz" = "" ] && Die "FIXME - can't find $filename's size."
185	siz=$(($siz-2));# to allow for sectors & the fact that they round up
186	fi
187	[ ! "$siz" ] && siz=4
188	[ "$siz" -lt "0" ] && siz=0
189	LAST_COMPRESSED_SIZE=$(($LAST_COMPRESSED_SIZE+$siz))
190	[ "$LAST_COMPRESSED_SIZE" -le "$MAX_COMPRESSED_SIZE" ] &&return $diskno
191	echo "disk=$diskno siz=$LAST_COMPRESSED_SIZE" >> $LOGFILE
192	LAST_COMPRESSED_SIZE=0
193	rm -f $minidir_root/$diskno/$filename
194	diskno=$(($diskno+1))
195	done
196	return 0 ; # failed
197	}
198
199
200	AddKeyboardMappingFile() {
201	local mappath r included_list included_item i res ii sss
202	mappath=$1
203	KBDEPTH=$(($KBDEPTH+1))
204	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
205	if [ -e "$bigdir/$mappath" ] ; then
206	echo "$mappath already added" >> $LOGFILE
207	return
208	elif [ -d "$bigdir/$mappath" ] ; then
209	echo "Cannot add $mappath: it's a directory. Sorry."
210	return
211	fi
212	echo "Added kbd map $mappath" >> $LOGFILE
213	if [ ! -e "$mappath" ] ; then
214	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
215	if [ ! -e "$mappath" ] ; then
216	LogIt "Cannot add $mappath: kbd map file not found"
217	return
218	fi
219	else
220	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
221	fi
222
223	mkdir -p $bigdir/etc
224	cp --parents -pRdf $mappath $bigdir 2>> $LOGFILE \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
225	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
226	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
227	else
228	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
229	fi
230	for included_item in $included_list ; do
231	if [ ! -e "$included_item" ] ; then
232	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
233	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
234	for ii in $sss ; do
235	[ -e "$ii" ] && AddKeyboardMappingFile $ii
236	done
237	else
238	AddKeyboardMappingFile $included_item
239	fi
240	done
241	}
242
243
244	ChopUpAndCopyFile() {
245	local filename slicesize outdir res biggienumber filesize sliceno noof_slices testfile scratchfile
246	filename=$1
247	outdir=$2
248	slicesize=$3
249	biggienumber=$4
250
251	[ -d "$filename" ] && Die "Cannot chop up $filename: it's a directory. Please amend deplist.txt accordingly."
252	mkdir -p $outdir
253
254	sliceno=0
255	scratchfile=$MINDI_TMP/blah.$$.dat
256	cp -f $filename $scratchfile 2>> $LOGFILE \|\| Die "CUACF -- cannot copy $filename to $scratchfile - did you run out of disk space?"
257	[ "`head $scratchfile -n1 \| grep -F "bin/sh"`" != "" ] && StripComments $scratchfile "-$filename-"
258	[ "`echo "$filename" \| grep -F "etc/termcap"`" != "" ] && StripComments $scratchfile "-$filename-"
259	if [ "`echo "$filename" \| grep -F "lib/modules/" \| grep "\.*o\.gz"`" != "" ] ; then
260	mv $scratchfile $scratchfile.gz
261	gunzip -f $scratchfile \|\| LogIt "Cannot gunzip $scratchfile.gz"
262	filename=`echo "$filename" \| tr '.' '#' \| sed s/#o#gz/#o/ \| sed s/#ko#gz/#ko/ \| tr '#' '.'`
263	fi
264	filesize=`du -sk $scratchfile \| cut -f1`
265	noof_slices=$(($filesize/$slicesize))
266	echo "$filename" > $outdir/slice-$biggienumber.name
267	echo "$filesize" > $outdir/slice-$biggienumber.size
268	[ -x "$scratchfile" ] && StripExecutable $scratchfile "-$filename-"
269	while [ "$sliceno" -le "$noof_slices" ] ; do
270	dd if=$scratchfile skip=$(($sliceno*$slicesize)) of=$outdir/slice-$biggienumber.`printf "%03d" $sliceno` bs=1k count=$slicesize &> /dev/null
271	sliceno=$(($sliceno+1))
272	done
273	rm -f $scratchfile
274	}
275
276
277	CopyBootBFile() {
278	local copy_to copy_from possible_locations liloc
279	copy_to=$1
280	copy_from=/boot/boot.b
281	liloc=`which lilo.real 2>/dev/null`
282	[ $liloc ] \|\| liloc=`which lilo 2>/dev/null`
283	if [ $liloc ]; then
284	if ! [ `strings $liloc \| grep "boot\.b"` ]; then
285	LogIt "boot.b files built into lilo; I'll create a dummy."
286	> $copy_to
287	return 0
288	fi
289	fi
290	if [ ! -f "$copy_from" ] ; then
291	LogIt "OK, you don't have a /boot/boot.b file, which is odd because\n most _good_ Linux distributions come with one, even if it's only a softlink"
292	copy_from=`grep install= /etc/lilo.conf \| grep "\.b" \| cut -d'=' -f2`
293	if [ ! -f "$copy_from" ] ; then
294	LogIt "Nor can I find it from your /etc/lilo.conf file. This is very odd."
295	copy_from=`FindSensibleBootBFile`
296	LogIt "I'm going to use '$copy_from'"
297	fi
298	fi
299	cp -f $copy_from $copy_to 2>> $LOGFILE \|\| LogIt "CBBF -- warning -- cannot find your boot.b file. That's it, I quit... (j/k)"
300	}
301
302
303	CopyDependenciesToDirectory() {
304	local outdir incoming fname filesize counter d found
305	outdir=$1
306	mkdir -p $outdir
307	incoming=`ReadLine`
308	counter=0
309	while [ "$incoming" != "" ] ; do
310	# Non absolute file names should not arrive till here => skipped
311	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
312	LogIt "Unable to handle $incoming"
313	incoming=`ReadLine`
314	continue
315	fi
316	# no parent directory of incoming should be a link, copy is not possible in that case
317	d=`dirname "$incoming"`
318	found="false"
319	while [ $d != "/" -a $found = "false" ]; do
320	[ -h "$d" ] && found="true"
321	d=`dirname "$d"`
322	done
323	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
324	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
325	elif [ -e "$incoming" ] && [ $found = "false" ]; then
326	filesize=`du -sk $incoming \| cut -f1`
327	if [ "$filesize" -gt "$(($CHOPSIZE*2))" ] && [ ! -h "$incoming" ] ; then
328	ChopUpAndCopyFile $incoming $outdir $CHOPSIZE $BIGNO
329	BIGNO=$(($BIGNO+1))
330	else
331	cp --parents -Rdf $incoming $outdir 2> /dev/null \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
332	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] ; then
333	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
334	fi
335	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
336	fi
337	counter=$(($counter+1))
338	if [ "$counter" -ge "5" ] ; then
339	counter=0
340	echo -en "."
341	fi
342	fi
343	incoming=`ReadLine`
344	done
345	}
346
347
348	CopyImageToDisk() {
349	local image dev procno res comment
350	image=$1
351	dev=$2
352	comment=$3
353	[ ! -f "$image" ] && [ ! -b "$image" ] && Die "Image $image does not exist. Did you run out of disk space?"
354	Prompt "About to write $comment. Please press ENTER."
355	echo -en "Formatting disk..."
356	if which fdformat > /dev/null ; then
357	fdformat -n $dev > /dev/null 2> /dev/null \|\| Die "Cannot format $dev - is your Linux distro broken?"
358	elif which superformat > /dev/null ; then
359	superformat $dev > /dev/null 2> /dev/null \|\| Die "Cannot format $dev - is your Linux distro broken?"
360	else
361	Die "Please install either fdformat or superformat."
362	fi
363	echo -en "\rWriting $comment"
364	if echo $image \| grep "mindi-[r\|b]oot\.1440" &> /dev/null ; then
365	cat $image > $dev &
366	else
367	dd if=$image of=$dev &> /dev/null &
368	fi
369	procno=$!
370	ps $procno > /dev/null 2> /dev/null
371	while [ "$?" -eq "0" ] ; do
372	sleep 3
373	echo -en "."
374	ps $procno > /dev/null 2> /dev/null
375	done
376	echo -e "$DONE"
377	LogIt "$comment has been written."
378	}
379
380
381	CountItemsIn() {
382	local r
383	r=0
384	for q in $1 ; do
385	r=$(($r+1))
386	done
387	echo $r
388	}
389
390
391	CreateDataDiskImagesFromTarballs() {
392	local tardir outdir diskno noof_disks kp
393	tardir=$1
394	outdir=$2
395	noof_disks=$3
396
397	mkdir -p $outdir
398	diskno=1
399	echo -en "Creating data disk "
400	while [ "$diskno" -le "$noof_disks" ] ; do
401	echo -en "#$diskno..."
402	cp -f $tardir/$diskno.tar.gz $outdir 2>> $LOGFILE \|\| LogIt "[line 424] Cannot copy $tardir/$diskno.tar.gz to $outdir"
403	CreateOneDataDiskImage $tardir/$diskno.tar.gz $outdir/mindi-data-$diskno.img $diskno $noof_disks
404	diskno=$(($diskno+1))
405	done
406	mv -f $tardir/all.tar.gz $outdir
407	du -sk $outdir/*gz >> $LOGFILE
408	echo -e "$DONE"
409	}
410
411
412
413	CreateOneDataDiskImage() {
414	local tarball imagefile dev diskno noof_disks mountpoint
415	tarball=$1
416	imagefile=$2
417	diskno=$3
418	noof_disks=$4
419
420	mountpoint=$MINDI_TMP/mountpoint.$$
421	mkdir -p $mountpoint
422	dd if=/dev/zero of=$imagefile bs=1k count=1440 &> /dev/null \|\| LogIt "Cannot dd (CODI)"
423	echo "Creating ext2 filesystem on $imagefile" >> $LOGFILE
424	mke2fs -N 12 -F $imagefile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $imagefile"
425	mount -t ext2 -o loop $imagefile $mountpoint \|\| Die "Can't loopmount $imagefile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
426	mv $tarball $mountpoint/
427	if [ "$?" -ne "0" ] ; then
428	umount $mountpoint
429	Die "Tarball $tarball is too big for disk! (CODI)\nTell Dev Team to adjust MAX_COMPRESSED_SIZE"
430	fi
431	[ "$diskno" -eq "$noof_disks" ] && echo "This is the last disk ($diskno=$noof_disks)" >> $mountpoint/LAST-DISK
432	umount $mountpoint \|\| LogIt "Cannot umount (CODI)"
433	rmdir $mountpoint \|\| LogIt "Cannot rmdir (CODI)"
434	}
435
436
437	# Last function called before exiting
438	# Parameter is exit code value
439	MindiExit() {
440	local my_partitions
441
442	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
443	echo "End date : `date`" >> $LOGFILE
444	if [ _"$MONDO_SHARE" != _"" ] ; then
445	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
446	cat $LOGFILE >> /var/log/mondoarchive.log
447	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
448	fi
449
450	cd /
451	sync&
452
453	# Unmount what could remain mounted
454	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
455	[ "$my_partitions" != "" ] && umount $my_partitions
456	# Clean temporary files only when standalone mindi
457	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
458	rm -Rf $MINDI_TMP
459	fi
460	exit $1
461	}
462
463	Die() {
464	local i
465	if [ "$1" = "" ] ; then
466	LogIt "FATAL ERROR"
467	else
468	LogIt "FATAL ERROR. $1"
469	fi
470
471	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
472	LogIt "See http://www.mondorescue.org for more information."
473	LogIt "WE CANNOT HELP unless you enclose that file.\n"
474	MindiExit -1
475	}
476
477
478	DropOptimizedLibraries() {
479	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
480	filelist=$1
481	outdir=$2
482
483	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
484	if [ "$list_of_optimized_libraries" = "" ] ; then
485	return 0
486	fi
487	echo -en "Dropping i686-optimized libraries if appropriate"
488	for optimized_lib_name in $list_of_optimized_libraries ; do
489	echo -en "."
490	reason=""
491	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
492	echo "$vanilla_lib_name" >> $filelist
493	resolved=$vanilla_lib_name
494	echo "Adding $resolved to filelist" >> $LOGFILE
495	resolved=`ReadAllLink $resolved`
496	echo "Adding $resolved to filelist" >> $LOGFILE
497	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
498	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
499	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
500	echo "Excluding $optimized_lib_name" >> $LOGFILE
501	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
502	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
503	echo "$vanilla_lib_name" >> $filelist.tmp
504	mv -f $filelist.tmp $filelist
505	done
506	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
507	mv -f $filelist.tmp $filelist
508	echo -e "$DONE"
509	}
510
511
512	FindAndAddUserKeyboardMappingFile() {
513	local r res mapfile mappath included_item included_list keyfile mp locale
514	LogIt "Analyzing your keyboard's configuration."
515	KEYDIR=/lib/kbd
516	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
517	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
518	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
519	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
520	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
521	if [ ! -e "$KEYDIR" ] ; then
522	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
523	return 0
524	fi
525	if [ -e "/etc/sysconfig/keyboard" ] ; then
526	echo "Red Hat-style config detected." >> $LOGFILE
527	keyfile=/etc/sysconfig/keyboard
528	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
529	echo "Slackware-style config detected." >> $LOGFILE
530	keyfile=/etc/rc.d/rc.keymap
531	elif [ -e "/etc/rc.config" ] ; then
532	echo "Debian-style config detected." >> $LOGFILE
533	keyfile=/etc/rc.config
534	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
535	echo "Debian-style config detected." >> $LOGFILE
536	echo -en "Adding the following keyboard mapping tables: "
537	mkdir -p $bigdir/tmp
538	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
539	KBDEPTH=0
540	mkdir -p $bigdir/etc/console
541	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
542	echo -e "$DONE"
543	return 0
544	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
545	echo "Ubuntu-style config detected." >> $LOGFILE
546	echo -en "Adding the following keyboard mapping tables: "
547	mkdir -p $bigdir/tmp
548	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
549	KBDEPTH=0
550	mkdir -p $bigdir/etc/console-setup
551	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
552	echo -e "$DONE"
553	return 0
554	elif [ -e "/etc/conf.d/keymaps" ] ; then
555	echo "Gentoo-style config detected." >> $LOGFILE
556	keyfile=/etc/conf.d/keymaps
557	else
558	echo -en "Searching for rc.config ..."
559	keyfile=`find /etc -name rc.config \| head -n1`
560	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
561	LogIt "Unknown config detected. Default keyboard map will be used."
562	return
563	else
564	echo "Found $keyfile" >> $LOGFILE
565	fi
566	fi
567	if [ ! -e "$KEYDIR/keymaps" ] ; then
568	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
569	return
570	fi
571	echo "keyfile=$keyfile" >> $LOGFILE
572	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
573	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
574	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
575	echo "locale=$locale" >> $LOGFILE
576	#
577	# Process the keymaps dir once for all
578	# AddKeyboardMappingFile will use it recursively
579	#
580	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
581	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
582	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
583	# If we have multiple keymaps then log it !!
584	echo "$mp" \| grep -q " "
585	if [ $? -eq 0 ]; then
586	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
587	echo "The following one will be used" >> $LOGFILE
588	fi
589	for i in $mp ; do
590	mappath=$i
591	[ -e "$i" ] && [ ! -d "$i" ] && break
592	done
593	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
594	mappath=$(locate /kbd/keymaps//$locale)
595	fi
596	echo "mappath = $mappath" >> $LOGFILE
597	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
598	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
599	return
600	fi
601	echo -en "Adding the following keyboard mapping tables: "
602	mkdir -p $bigdir/tmp
603	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
604	KBDEPTH=0
605	AddKeyboardMappingFile $mappath
606	echo -e "$DONE"
607	rm -f $MINDI_TMP/keymaps.find
608	return 0
609	}
610
611
612	FindIsolinuxBinary() {
613	ISOLINUX=/usr/lib/isolinux.bin
614	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
615	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
616	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
617	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
618	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
619	[ ! -e "$ISOLINUX" ] && ISOLINUX=`locate isolinux.bin \| grep -x "/.*/isolinux.bin"`
620	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
621	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
622	}
623
624
625	FindLiloBinary() {
626	if which lilo &> /dev/null ; then
627	if which lilo.real > /dev/null 2> /dev/null ; then
628	LILO_EXE=lilo.real
629	LogIt "lilo.real found; will be used instead of lilo (grumble mutter)"
630	else
631	LILO_EXE=lilo
632	fi
633	$LILO_EXE -V \| grep -F "21.6" > /dev/null && Die "Please upgrade LILO. Your version has a serious bug. If you're not _using_ LILO, fine, uninstall it. :)"
634	else
635	LILO_EXE=`which false`
636	fi
637	}
638
639
640	FindSensibleBootBFile() {
641	local i out last
642	out=""
643	last=""
644	for i in `find /boot -type f \| grep -v chain \| grep -v os2 \| sort -u` ; do
645	if [ "`strings $i 2> /dev/null \| head -n1`" = "LILO" ] ; then
646	out="$out $i"
647	last="$i"
648	fi
649	done
650	echo "$last"
651	}
652
653
654	FindSpecificModuleInPath() {
655	local modpaths pwd line
656	pwd=`pwd`
657	if [ "$YOUR_KERNEL_SUCKS" ] ; then
658	cd $MINDI_TMP
659	else
660	cd /
661	fi
662	if [ ! -e "$1" ] ; then
663	LogIt "WARNING - cannot search specific path '$1'"
664	return 1
665	fi
666	modpaths=`find $1 -name $2.*o -type f`
667	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
668	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
669	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
670	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
671	echo "$modpaths"
672	cd $pwd
673	}
674
675
676	GenerateGiantDependencyList() {
677	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
678
679	echo -en "Analyzing dependency requirements"
680	outfile=$1
681	tempfile=$MINDI_TMP/$$.txt
682	incoming=`ReadLine`
683
684	> $tempfile
685	progress=0
686	res=0
687	noof_lines=$2
688	while [ "$incoming" != "" ] ; do
689	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
690	incoming=`ReadLine`
691	continue
692	fi
693	if [ "$incoming" = "LVMFILES:" ] ; then
694	break
695	fi
696	filelist=`GenerateListForFile "$incoming"`
697	r=$?
698	[ "$r" -ne "0" ] && LogIt "$incoming not found"
699	res=$(($res+$r))
700	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
701	for fname in $filelist ; do
702	[ "$fname" != "" ] && echo "$fname" >> $tempfile
703	done
704	progress=$(($progress+1))
705	echo -en "\r\t\t\t\t\t\t\t\t"
706	i=$(($progress*100))
707	i=$(($i/$noof_lines))
708	echo -en "$i"
709	echo -en "%"
710	modres=$(($progress%4))
711	[ "$modres" -eq "0" ] && echo -en "\t/"
712	[ "$modres" -eq "1" ] && echo -en "\t-"
713	[ "$modres" -eq "2" ] && echo -en "\t\\"
714	[ "$modres" -eq "3" ] && echo -en "\t\|"
715	incoming=`ReadLine`
716	done
717	if [ "$incoming" = "LVMFILES:" ] ; then
718	incoming=`ReadLine`
719	lvmversion=""
720	while [ "$incoming" != "" ] ; do
721	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
722	incoming=`ReadLine`
723	continue
724	fi
725	filelist=`GenerateListForFile "$incoming"`
726	for tool in $filelist ; do
727	lvmresolved=`readlink -f $tool`
728	if [ "$tool" = "$lvmresolved" ]; then
729	echo "$tool" >> $tempfile
730	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
731	if [ "$lvmversion" = "" ] ; then
732	lvmversion=`$lvmresolved`
733	echo "$lvmresolved" >> $tempfile
734	fi
735	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
736	if [ "$lvmversion" = "200" ]; then
737	# pvdata and lvmcreate_initrd don't exist in LVM2
738	case "$toolstripped" in
739	"pvdata")
740	continue
741	;;
742	"lvmcreate_initrd")
743	continue
744	;;
745	esac
746	fi
747	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
748	if [ -e "$toolpath" ] ; then
749	echo "$toolpath" >> $tempfile
750	echo "$tool" >> $tempfile
751	else
752	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
753	fi
754	if [ -e "$toolpath" ] ; then
755	echo "$toolpath" >> $tempfile
756	echo "$tool" >> $tempfile
757	else
758	echo "Where are your LVM-Tools? Couldn't find $tool"
759	fi
760	else
761	echo "$tool" >> $tempfile
762	fi
763	done
764	progress=$(($progress+1))
765	echo -en "\r\t\t\t\t\t\t\t\t"
766	i=$(($progress*100))
767	i=$(($i/$noof_lines))
768	echo -en "$i"
769	echo -en "%"
770	modres=$(($progress%4))
771	[ "$modres" -eq "0" ] && echo -en "\t/"
772	[ "$modres" -eq "1" ] && echo -en "\t-"
773	[ "$modres" -eq "2" ] && echo -en "\t\\"
774	[ "$modres" -eq "3" ] && echo -en "\t\|"
775	incoming=`ReadLine`
776	done
777	fi
778	echo -en "$DONE\nMaking complete dependency list"
779
780	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
781	mv -f $tempfile.new $tempfile
782	> $outfile.pre
783	progress=0
784	noof_lines=`cat $tempfile \| wc -l`
785	for fname in `cat $tempfile` ; do
786	echo "$fname" >> $outfile.pre
787	LocateDeps $fname >> $outfile.pre
788	progress=$(($progress+1))
789	echo -en "\r\t\t\t\t\t\t\t\t"
790	i=$(($progress*100))
791	i=$(($i/$noof_lines))
792	echo -en "$i"
793	echo -en "%"
794	modres=$(($progress%4))
795	[ "$modres" -eq "0" ] && echo -en "\t/"
796	[ "$modres" -eq "1" ] && echo -en "\t-"
797	[ "$modres" -eq "2" ] && echo -en "\t\\"
798	[ "$modres" -eq "3" ] && echo -en "\t\|"
799	done
800	if [ _"$MONDO_SHARE" != _"" ]; then
801	mkdir -p $bigdir/tmp
802	mkdir -p $bigdir/sbin
803	mkdir -p $bigdir/bin
804	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
805	LogIt "\nIncorporating post-nuke tarball"
806	old_pwd=`pwd`
807	cd $bigdir
808	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
809	cd $old_pwd
810	fi
811	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
812	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
813	else
814	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
815	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
816	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
817	Die "Odd."
818	fi
819	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
820	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
821	LogIt "Incorporating NFS-related settings"
822	for r in NFS-* ISO-PREFIX ; do
823	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
824	echo "Copying $r to ramdisk" >> $LOGFILE
825	done
826	fi
827	fi
828	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
829	rm -f $tempfile $outfile.pre
830	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
831	return $res
832	}
833
834
835	GenerateListForFile() {
836	local files_found loc fname incoming i res
837	incoming="$1"
838	files_found=""
839	res=0
840
841	for fname in $incoming ; do
842	files_found="$files_found `LocateFile $fname`"
843	done
844
845	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
846	}
847
848
849	# Returns all disk devices which are part of a raid array
850	GetAllRaidMembers() {
851	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
852	}
853
854
855	GetFileSizeList() {
856	local i
857	for i in `find $1 -type d -o -print` ; do
858	du -sk $i
859	done
860	}
861
862
863	GetHomeDir() {
864	local res loc
865	loc=`which $1 2>/dev/null`
866	res=`file $loc \| $AWK '{print $NF;}'`
867	dirname $res
868	}
869
870
871	# Check kernel filesystem capabilites for accessing initrd image
872	#
873	# Interface definition:
874	# param #1: absolute path to kernel image
875	GetInitrdFilesystemToUse() {
876
877	# interface test: make sure we have one parameter
878	if [ $# -ne 1 ]; then
879	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
880	fi
881
882	# interface parameters
883	local lvKernelImage=$1
884
885	# local constants (filesystem magic strings)
886	local lcMagicCramfs="<3>cramfs: wrong magic"
887	local lcMagicExt2fs="<3>EXT2-fs: blocksize too small for device."
888	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
889
890	# local variables
891	local lvOffset
892	local lvScanRes
893	local lvUseFilesystem
894
895	# say where we are.
896	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
897
898	# verify that file exists
899	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
900
901	# Kernel may be gzip compressed
902	file $lvKernelImage 2>&1 \| grep -q gzip
903	if [ $? -eq 0 ]; then
904	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
905	else
906	# get offet of gzip magic "1f8b0800" in file
907	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
908	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
909	lvOffset=`expr $lvOffset / 2`
910	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
911
912	# scan kernel image for initrd filessystem support
913	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
914	fi
915
916	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
917	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
918	lvUseFilesystem="ext2fs"
919	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
920	lvUseFilesystem="initramfs"
921	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
922	lvUseFilesystem="cramfs"
923	else
924	lvUseFilesystem="UNSUPPORTED"
925	fi
926
927	# say what we are using
928	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
929
930	# return file system to use
931	echo "$lvUseFilesystem"
932
933	}
934
935	# Searches parent raid device of given disk device
936	# $1: disk device (i.e. /dev/hda1)
937	GetParentRaidDev() {
938	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
939	}
940
941
942	# Searches members of raid device
943	# $1: raid device (/dev/md...)
944	GetRaidDevMembers() {
945	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
946	}
947
948
949	HackPathsToFailsafe() {
950	local incoming newpath kver stub i pwd
951	kver=`uname -r`
952	incoming=`ReadLine`
953	pwd=`pwd`
954	cd $MINDI_TMP
955	while [ "$incoming" != "" ] ; do
956	stub=`basename $incoming`
957	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
958	for i in $newpath ; do
959	echo "$i"
960	done
961	read incoming
962	done
963	cd $pwd
964	}
965
966
967	ListAllPartitions() {
968	local res currline partition all_partitions ap_orig remaining i j
969
970	grep -vx " #." $MY_FSTAB \| grep -vx " none." \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
971	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
972	if [ -e "/vmfs/volumes" ]; then
973	# For VMWare ESX 3 get the device names of these volumes
974	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
975	fi
976	return
977	}
978
979
980	ListImagesForUser() {
981	local path fname
982	path=$1
983	echo -en "In the directory '$path' you will find the images:-\n"
984	for fname in `ls $path \| grep -F mindi-` ; do
985	printf "%19s " $fname
986	done
987	echo " "
988	}
989
990
991	ListKernelModulePaths() {
992	local module_list module fname oss r kern
993	oss="/root/oss/modules"
994	module_list="$MODULES"
995	# Remove unwanted modules from list
996	for i in $DENY_MODS; do
997	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
998	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
999	done
1000	###
1001	### Sq-Modification ... Use kernelname for module search path if specified
1002	###
1003	# kern="`uname -r`"
1004	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
1005	then
1006	kern=${kernelname}
1007	else
1008	kern="`uname -r`"
1009	fi
1010	###
1011	### Sq-Mod End
1012	###
1013	for module in $module_list $EXTRA_MODS ; do
1014	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
1015	echo "module $module --> $r" >> $LOGFILE
1016	[ "$r" ] && echo "$r"
1017	[ -f "$oss" ] && find $oss \| grep -F $module
1018	done
1019	find /lib/modules/$kern/modules.* -type f 2> /dev/null
1020	[ -f "$oss" ] && find $oss.* 2> /dev/null
1021	}
1022
1023	#
1024	# Critical function which computes all dependencies (dyn. lib.)
1025	# for a list of binaries
1026	#
1027	LocateDeps() {
1028	local incoming fname deps
1029	incoming="$*"
1030	for fname in $incoming ; do
1031	if [ ! -e "$fname" ] ; then
1032	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
1033	if echo $fname \| grep lvm &> /dev/null ; then
1034	echo "This warning only affects you if you are using LVM." >> $LOGFILE
1035	if echo "$MODULES" \| grep lvm &> /dev/null ; then
1036	echo "I think you are, so please take heed!" >> $LOGFILE
1037	# LogIt "Where is liblvm? You need it."
1038	else
1039	echo "I don't think you are, so don't worry about it." >> $LOGFILE
1040	fi
1041	fi
1042	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
1043	echo "$fname is softlink" >> $LOGFILE
1044	else
1045	ldd $fname 2> /dev/null \| ProcessLDD
1046	fi
1047	done
1048	}
1049
1050
1051	# Give all symlinks recursively of a full path name
1052	ReadAllLink() {
1053	file="$1"
1054
1055	if [ ! -h $file ]; then
1056	echo "$file"
1057	return 0
1058	fi
1059
1060	link=`readlink -f $file`
1061	d=`dirname $file`
1062	if [ ! -e "$link" -a ! -e "$d/$link" ]; then
1063	echo "Problem with dead link on $file -> $link" >> $LOGFILE
1064	fi
1065	if [ -h "$d" ]; then
1066	echo "$link"
1067	echo "$d"
1068	else
1069	echo "$link"
1070	fi
1071	}
1072
1073
1074	LocateFile() {
1075	local i path fname_to_find location output resolved tmp stub cache_id loclist
1076	fname_to_find="$1"
1077	# It's an absolute path
1078	if echo "$fname_to_find" \| grep -x "/.*" ; then
1079	output="$fname_to_find"
1080	if [ -h "$output" ] ; then
1081	output="`ReadAllLink $output` $output"
1082	fi
1083	echo "$output"
1084	return 0
1085	fi
1086	# It's not an absolute path
1087	output=""
1088	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
1089	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
1090	[ -h "$path" ] && continue
1091	[ ! -e "$path/$fname_to_find" ] && continue
1092	output="$path/$fname_to_find $output"
1093	if [ -h "$path/$fname_to_find" ] ; then
1094	output="`ReadAllLink $path/$fname_to_find` $output"
1095	fi
1096	done
1097	if [ "$output" = "" ] ; then
1098	return 1
1099	fi
1100	echo "$output"
1101	return 0
1102	}
1103
1104
1105	LogIt() {
1106	if [ -e /dev/stderr ] ; then
1107	echo -e "$1" >> /dev/stderr
1108	elif [ -e /usr/bin/logger ] ; then
1109	/usr/bin/logger -s $1
1110	fi
1111	echo -e "$1" >> $LOGFILE
1112	}
1113
1114
1115	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
1116	MakeMondoConfigFile() {
1117	local outfile use_lzo use_comp use_star
1118	outfile=$1
1119	> $outfile
1120	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
1121	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
1122	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
1123	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1124	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1125	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1126	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1127	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1128	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1129	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1130	echo "use-lzo $use_lzo" >> $outfile
1131	echo "use-gzip $use_gzip" >> $outfile
1132	echo "use-star $use_star" >> $outfile
1133	echo "use-comp $use_comp" >> $outfile
1134	echo "datestamp `date`" >> $outfile
1135	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1136	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
1137	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
1138	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
1139	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
1140	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
1141	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
1142	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
1143	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
1144	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
1145	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
1146	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1147	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
1148	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1149	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1150	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1151	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1152	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1153	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1154	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1155	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1156	}
1157
1158
1159	MakeModuleLoadingScript() {
1160	local module fname params modpath kver outerloop i modpaths kver searchpath list_to_echo j
1161	tmpmodprobe_flag=$1
1162	outfile=$2
1163	> $outfile \|\| Die "Cannot create empty $outfile"
1164	echo -en "#\041/bin/sh\n\n" >> $outfile
1165	echo "echo -en \"Loading your modules...\"" >> $outfile
1166	if [ "$YOUR_KERNEL_SUCKS" ] ; then
1167	kver=$FAILSAFE_KVER
1168	cd $MINDI_TMP
1169	searchpath=lib/modules/$kver
1170	else
1171	###
1172	### Sq-Modification ... Use kernelname for module search path if specified
1173	###
1174	#kver=`uname -r`
1175	if [ "${kernelname}" != "" ]
1176	then
1177	kver=${kernelname}
1178	else
1179	kver=`uname -r`
1180	fi
1181	###
1182	### Sq-Modification end
1183	###
1184	searchpath=/lib/modules/$kver
1185	fi
1186
1187	echo -en "for outerloop in 1 2 3 4 5 ; do\necho -en \".\"\n" >> $outfile
1188	list_to_echo="$MODULES"
1189	# Remove unwanted modules from list
1190	for i in $DENY_MODS; do
1191	list_to_echo=`echo ${list_to_echo} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
1192	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
1193	done
1194
1195	# Make temporary modprobe.conf file if we are told so
1196	if [ "$tmpmodprobe_flag" = "Y" ] ; then
1197	infile="$MINDI_TMP/modprobe.conf.mindi"
1198	find /etc/modprobe.d -maxdepth 1 -name "*" -xtype f -print0 \| xargs -0 cat > $infile
1199	else
1200	infile="/etc/modules.conf"
1201	fi
1202
1203	for module in $list_to_echo $EXTRA_MODS ; do
1204	params=`sed -n "s/^options \\+$module \\+//p" $infile`
1205	modpaths=`FindSpecificModuleInPath $searchpath $module`
1206	for i in $modpaths ; do
1207	echo "MyInsmod $i $params > /dev/null 2> /dev/null" \
1208	\| tr '.' '#' \
1209	\| sed s/#o#gz/#o/ \
1210	\| sed s/#o#gz/#o/ \
1211	\| sed s/#ko#gz/#ko/ \
1212	\| sed s/#ko#gz/#ko/ \
1213	\| tr '#' '.' >> $outfile
1214	echo -en "$i added to module list.\n" >> $LOGFILE
1215	done
1216	done
1217	echo -en "done\n" >> $outfile
1218	echo "echo \"Done.\"" >> $outfile
1219	chmod +x $outfile
1220	cd /
1221	# Remove temporary modprobe.conf file if we have created one
1222	if [ "$tmpmodprobe_flag" = "Y" ] ; then
1223	rm -f $infile
1224	fi
1225	}
1226
1227
1228	MakeMountlist() {
1229	local scratchdir mountlist all_partitions current_partition \
1230	partition_size partition_format outstring partition_number \
1231	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1232	absolute_partition old_partition_fmt current_lvolume
1233
1234	echo "Your raw fstab file looks like this:" >> $LOGFILE
1235	echo "------------------------------------" >> $LOGFILE
1236	cat $MY_FSTAB >> $LOGFILE
1237	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
1238	echo "-----------------------------------" >> $LOGFILE
1239
1240	# scratchdir, mountlist(OUT)
1241	scratchdir=$MINDI_TMP
1242	mountlist=$1
1243
1244	# NB: partition = device
1245	# NB: mountpt = where the device is mounted
1246
1247	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
1248
1249	[ "$mountlist" != "" ] && rm -Rf $mountlist
1250	> $mountlist
1251	echo -en "\rHang on...\r"
1252	all_partitions=""
1253
1254	if [ $LVM != "false" ]; then
1255	echo -en "\rAnalyzing LVM...\r"
1256	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1257	if [ $? -ne 0 ]; then
1258	LVM="false"
1259	fi
1260	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
1261	fi
1262	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1263	# echo "all partitions = $all_partitions" > /dev/stderr
1264	for i in $IMAGE_DEVS ; do
1265	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1266	done
1267	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
1268	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
1269	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
1270	for c_p in $all_partitions ; do
1271	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
1272	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
1273	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
1274	current_partition=`readlink -f $c_p`
1275	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
1276	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
1277	else
1278	current_partition="$c_p"
1279	fi
1280	[ "$c_p" = "none" ] && continue
1281	redhat_label=""
1282	uuid=""
1283	absolute_partition=`readlink -f $c_p`
1284	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1285
1286	# Detects noauto partitions not mounted and exclude them
1287	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
1288	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
1289	continue
1290	fi
1291
1292	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1293	# current_partition contains only first column of /etc/fstab
1294	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
1295	str_to_find_fmt_with=$current_partition
1296	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
1297	actual_dev=""
1298
1299	# 1st try, findfs - the RHEL way of finding labels and their partitions
1300	if [ -x "/sbin/findfs" ]; then
1301	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
1302	fi
1303
1304	# 2nd try : blkid, the good way for all LABEL except swap
1305	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1306	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
1307	# For LVM FS it will give a /dev/dm-# which should then be converted
1308	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1309	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1310	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1311	for dev in `ls /dev/mapper/*`; do
1312	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1313	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1314	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1315	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1316	break
1317	fi
1318	done
1319	fi
1320	fi
1321
1322	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1323	# For LVM gives a /dev/mapper entry
1324	if [ "x$actual_dev" = "x" ]; then
1325	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
1326	fi
1327
1328	# 4th try, with vol_id
1329	# SWAP only
1330	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1331	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
1332	for dev_swap in $list_swaps ; do
1333	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
1334	if [ "x$dev_exists" != "x" ]; then
1335	actual_dev=$dev_swap
1336	break;
1337	fi
1338	done
1339	fi
1340
1341	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1342	# LABEL=SW-cciss/c0d0p3 (RDP)
1343	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1344	# SWAP only
1345	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1346	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1347	do
1348	# Location of the swap label for kernel 2.6
1349	try_dev_label=`dd bs=1 count=16 skip=1052 if=$try_dev 2> /dev/null`
1350	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1351	actual_dev=$try_dev
1352	fi
1353	done
1354	fi
1355
1356	# Check if one of all those tries has known success
1357	if [ "x$actual_dev" != "x" ]; then
1358	current_partition=$actual_dev
1359	else
1360	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in /etc/fstab or install findfs\|blkid\|vol_id"
1361	fi
1362	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1363	# current_partition contains only first column of /etc/fstab
1364	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
1365	str_to_find_fmt_with=$current_partition
1366	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1367	actual_dev=""
1368
1369	# 1st try, findfs - the RHEL way of finding labels and their partitions
1370	if [ -x "/sbin/findfs" ]; then
1371	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1372	fi
1373
1374	# 2nd try : blkid, the good way for all UUID except swap
1375	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1376	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1377	# For LVM FS it will give a /dev/dm-# which should then be converted
1378	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1379	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1380	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1381	for dev in `ls /dev/mapper/*`; do
1382	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1383	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1384	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1385	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1386	break
1387	fi
1388	done
1389	fi
1390	fi
1391
1392	# 3th try, with vol_id
1393	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1394	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1395	for dev in $list_dev ; do
1396	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
1397	if [ "x$dev_exists" != "x" ]; then
1398	actual_dev=$dev
1399	break;
1400	fi
1401	done
1402	fi
1403
1404	# 4th try, with dumpuuid (VMWare only ?) for swap
1405	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1406	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1407	for dev in $list_dev ; do
1408	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
1409	if [ "x$dev_exists" != "x" ]; then
1410	actual_dev=$dev
1411	break;
1412	fi
1413	done
1414	fi
1415
1416	# Check if one of all those tries has known success
1417	if [ "x$actual_dev" != "x" ]; then
1418	current_partition=$actual_dev
1419	else
1420	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1421	fi
1422	else
1423	str_to_find_fmt_with=$current_partition
1424	fi
1425
1426	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1427	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1428	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1429	# the former is then a link to the latter, so we test whether
1430	# $current_partition is actually such a link or not and set
1431	# $current_lvolume accordingly. On Debian you may find more than one answer
1432	# so we remove the one corresponding to /dev/.static
1433	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1434	# principle is the same and we need to find the link to it as well.
1435	# Note that $current_lvolume may well be an
1436	# ordinary device. It is just to make sure that we feed the right value
1437	# into any of the LVM tools if possible.
1438
1439	current_lvolume="$current_partition"
1440	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1441	# .static dir are a Debian specificity
1442	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1443	echo $current_lvolume \| grep -q ' '
1444	if [ $? -eq 0 ]; then
1445	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
1446	fi
1447	fi
1448	#
1449	# End of LVM device style variation code (other than $current_lvolume).
1450
1451	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1452	# Size computed via LVM not directly
1453	partition_size="lvm"
1454	else
1455	partition_size=`SizeOfPartition $current_partition`
1456	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1457	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1458	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1459	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
1460	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1461	[ "$partition_format" != "swap" ] && partition_format="swap"
1462	if [ "$partition_size" = "" ] ; then
1463	totalsize=0
1464	items=0
1465	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1466	totalsize=$(($totalsize+$i))
1467	items=$(($items+1))
1468	done
1469	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1470	[ "$partition_size" -lt "125000" ] && partition_size=125000
1471	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1472	fi
1473	fi
1474	fi
1475	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1476	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1477	if [ "$partition_mountpt" = "" ] ; then
1478	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1479	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1480	partition_mountpt="raid"
1481	partition_format="raid"
1482	else
1483	partition_mountpt="lvm"
1484	partition_format="lvm"
1485	fi
1486	fi
1487	fi
1488	psz=$partition_size
1489	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1490	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1491	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1492	partition_mountpt="image"
1493	old_partition_fmt=$partition_format
1494	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1495	partition_size=$(($partition_size+1)); # just in case
1496	if [ "$partition_format" = "Linux" ] ; then
1497	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1498	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1499	partition_format=$old_partition_fmt
1500	fi
1501	fi
1502	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
1503	echo "Excluding $current_partition from mountlist" >> $LOGFILE
1504	continue
1505	fi
1506	if [ ! "$partition_mountpt" ] ; then
1507	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1508	for qq in "" `find /dev/ida/cd ! -name 'p'` ; do
1509	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1510	[ "$partition_format" ] && break
1511	done
1512	echo "------- $FDISK log end ------------" >> $LOGFILE
1513	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1514	partition_format="compaq"
1515	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1516	LogIt "Unable to find mountpoint of $current_partition - ignoring"
1517	continue
1518	fi
1519	fi
1520	if [ "$redhat_label" ]; then
1521	label="$redhat_label"
1522	elif [ "$uuid" ]; then
1523	label="$uuid"
1524	fi
1525	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1526	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1527	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1528	if [ "$current_partition" = "" ] ; then
1529	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1530	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1531	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1532	partition_mountpt=raid
1533	partition_format=raid
1534	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1535	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1536	else
1537	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1538	fi
1539	elif [ "$partition_format" = "" ] ; then
1540	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1541	elif [ "$partition_size" = "" ] ; then
1542	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1543	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1544	continue
1545	else
1546	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1547	echo "Stupid bastard..." >> $LOGFILE
1548	partition_format="vfat"
1549	fi
1550	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1551	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1552	fi
1553	done
1554	}
1555
1556
1557	MakeSureNumberIsInteger() {
1558	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
1559	if [ "$res" != " " ] && [ "$res" != "" ] ; then
1560	echo "result = '$res'"
1561	Die "$1 should be an integer"
1562	fi
1563	}
1564
1565
1566	MakeSyslinuxMessageFile() {
1567	mkdir -p $1
1568	rmdir $1
1569	echo -en " " > $1
1570	if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1571	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ >> $1.tmp
1572	else
1573	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' '\\r' 'on' 'an' '\/' '`uname -r`' 'on' 'an' '`uname -m`/ >> $1.tmp
1574	fi
1575	sed s/%r/"`uname -r`"/ $1.tmp \| sed s/%t/"`hostname`"/ > $1
1576	rm -f $1.tmp
1577	if [ "$CDRECOVERY" != "yes" ] ; then
1578	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1579	echo -en "Press <enter> to continue.\n" >> $1
1580	elif [ ! "$MINDI_TMP" ] ; then
1581	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n" >> $1
1582	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1583	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n" >> $1
1584	fi
1585	else
1586	echo -en "$BOOT_MEDIA_MESSAGE" >> $1
1587	fi
1588	else
1589	echo -en " \
1590	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1591	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n" >> $1
1592	fi
1593	}
1594
1595
1596	MoveHyperlinkSensibly() {
1597	local filename minidir_root resides_on_diskno noof_disks old_diskno d old_pwd
1598	filename=$1
1599	minidir_root=$2
1600	resides_on_diskno=$3
1601	noof_disks=$4
1602
1603	[ -h "$minidir_root/$resides_on_diskno/$filename" ] \|\| Die "$filename isn't a softlink (or doesn't exist): how can I move it sensibly?"
1604
1605	old_diskno=$resides_on_diskno
1606	d=1
1607	while [ "$d" -le "$noof_disks" ] ; do
1608	if [ "$d" -ne "$old_diskno" ] ; then
1609	old_pwd=`pwd`
1610	cd $minidir_root/$old_diskno
1611	cp --parents -Rdf $filename $minidir_root/$d/ 2>> $LOGFILE \|\| Die "Can't move $filename (sensibly) from $old_diskno to $d"
1612	rm -f $filename
1613	cd $old_pwd
1614	fi
1615	# when the softlink is resolvable, our work here is done
1616	[ -e "$minidir_root/$d/$filename" ] && return 0
1617	old_diskno=$d
1618	d=$(($d+1))
1619	done
1620	return 1
1621	}
1622
1623
1624
1625	OfferToCopyImagesToDisks() {
1626	local imagesdir i imagename dev count boot_dev data_dev
1627	imagesdir=$1
1628	boot_dev=$2
1629	data_dev=$3
1630
1631	echo -en "Would you like to create boot+data floppy disks now (y/[n]) ?"
1632	read i
1633	[ "$i" != "y" ] && [ "$i" != "Y" ] && return
1634	mount \| grep -F /dev/fd > /dev/null && Die "Please unmount your floppies first."
1635	echo "WARNING! THIS WILL ERASE YOUR FLOPPY DISKS."
1636	[ ! -e "$boot_dev" ] && Die "Cannot find $boot_dev - is your Linux distro broken?"
1637	[ ! -e "$data_dev" ] && Die "Cannot find $data_dev - is your Linux distro broken?"
1638	i=`find $imagesdir -type f \| grep -F "/mindi-root.1" 2> /dev/null`
1639	j=`find $imagesdir -type f \| grep -F "/mindi-boot" \| grep -Ev "2880\|$BOOT_SIZE"`
1640	if [ "$i" ] ; then
1641	CopyImageToDisk $j $data_dev "boot disk"
1642	CopyImageToDisk $i $data_dev "root disk"
1643	else
1644	CopyImageToDisk $j $boot_dev "boot/root disk"
1645	fi
1646	count=1
1647	for i in `find $imagesdir \| grep -F mindi-data` ; do
1648	CopyImageToDisk $i $data_dev "data disk #$count"
1649	count=$(($count+1))
1650	done
1651	}
1652
1653
1654	OfferToMakeBootableISO() {
1655	local i old_pwd
1656	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1657	echo -en "Shall I make a bootable CD image? (y/[n]) "
1658	read i
1659	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1660	fi
1661	if [ ! "$MINDI_TMP" ] ; then
1662	LogIt "NB: Mindi's bootable CD always uses isolinux."
1663	LogIt "For a bootable CD w/LILO, please use Mondo."
1664	fi
1665	rm -Rf $MINDI_TMP/iso
1666	mkdir -p $MINDI_TMP/iso/{images,archives,isolinux}
1667	cp -f $1/.img $1/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $i to $MINDI_TMP/iso/images"
1668	old_pwd=`pwd`
1669	cd $MINDI_TMP/iso
1670	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1671	for i in memdisk memtest.bin memtest.img ; do
1672	j=$MINDI_LIB/$i
1673	k=$MINDI_TMP/iso/isolinux
1674	if [ -e "$j" ] ; then
1675	LogIt "Copying $j to $k"
1676	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1677	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1678	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
1679	fi
1680	done
1681	MakeSyslinuxMessageFile $MINDI_TMP/iso/isolinux/message.txt
1682	cp $kernelpath $MINDI_TMP/iso/isolinux/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MINDI_TMP/iso/isolinux/vmlinuz). Did you run out of disk space?"
1683	cp $kernelpath $MONDO_ROOT/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1684	cp $MINDI_TMP/mindi.rdz $MINDI_TMP/iso/isolinux/initrd.img 2>> $LOGFILE
1685	cp $MINDI_TMP/mindi.rdz $MONDO_ROOT/initrd.img 2>> $LOGFILE
1686	[ -e "$iso_cfg_file" ] \|\| Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1687	cd $MINDI_TMP/iso/isolinux
1688	cat $iso_cfg_file \| HackSyslinuxFile $ramdisk_size $MINDI_TMP/iso > isolinux.cfg \|\| Die "Cannot copy isolinux.cfg from mindi_home to tmp_root - did you run out of disk space?"
1689	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1690	mv isolinux.cfg isolinux.cfg.old
1691	sed s/interactive/iso/ isolinux.cfg.old > isolinux.cfg
1692	fi
1693	if [ "$ARCH" != "ia64" ] ; then
1694	cp $ISOLINUX isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to tmp_root - did you run out of disk space?"
1695	cp $ISOLINUX ../ 2>> $LOGFILE
1696	fi
1697	cd $MINDI_TMP/iso
1698	if [ "$ARCH" != "ia64" ] ; then
1699	cp -f $MINDI_TMP/iso/isolinux/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk. Did you run out of disk space?"
1700	fi
1701	[ "$MONDO_SHARE" ] && cp -f $MONDO_SHARE/autorun . 2>> $LOGFILE
1702	if [ "$ARCH" != "ia64" ] ; then
1703	mkisofs -U -J -r -o $CACHE_LOC/mindi.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1704	else
1705	mkisofs -J -r -o $CACHE_LOC/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c isolinux/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1706	fi
1707	if [ "$?" -ne "0" ] ; then
1708	echo "----------- mkisofs's errors --------------" >> $LOGFILE
1709	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1710	echo "mkisofs returned the following errors:-"
1711	cat $MINDI_TMP/mkisofs.log
1712	LogIt "Failed to create ISO image."
1713	else
1714	echo "Created bootable ISO image at $CACHE_LOC/mindi.iso" \| tee -a $LOGFILE
1715	fi
1716	rm -f $MINDI_TMP/mkisofs.log
1717	cd $old_pwd
1718	}
1719
1720
1721	OfferToMakeBootableUSB() {
1722	local i old_pwd
1723	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1724	echo -n "Shall I make a bootable USB image ? (y/[n]) "
1725	read i
1726	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1727	if [ "$USBDEVICE" = "" ]; then
1728	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1729	read dev
1730	USBDEVICE=$dev
1731	fi
1732	echo "WARNING: This will erase all content on $USBDEVICE"
1733	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1734	fi
1735	if [ _"$MINDI_TMP" = _"" ]; then
1736	Die "MINDI_TMP undefined"
1737	fi
1738	rm -Rf $MINDI_TMP/usb
1739	mkdir -p $MINDI_TMP/usb
1740	USBPART="${USBDEVICE}1"
1741
1742	echo -en "Transforming $USBDEVICE in a Bootable device "
1743	echo -en "."
1744	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
1745	echo "Checking $USBDEVICE" >> $LOGFILE
1746	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1747	if [ $? -ne 0 ]; then
1748	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
1749	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1750	exit -1
1751	fi
1752	echo -en "."
1753	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1754	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1755	echo "Erasing $USBDEVICE" >> $LOGFILE
1756	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1757	d
1758	d
1759	d
1760	d
1761	n
1762	p
1763	1
1764
1765
1766	t
1767	b
1768	a
1769	1
1770	w
1771	EOF
1772	if [ $? -ne 0 ]; then
1773	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
1774	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1775	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1776	MindiExit -1
1777	fi
1778	echo -en "."
1779	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1780	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1781	if [ $? -ne 0 ]; then
1782	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
1783	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
1784	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1785	MindiExit -1
1786	fi
1787	echo -en "."
1788	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1789	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1790	if [ $? -ne 0 ]; then
1791	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
1792	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
1793	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1794	MindiExit -1
1795	fi
1796	echo -en "."
1797	mkdir -p $MINDI_TMP/usb/images
1798	cp -f $1/.img $1/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1799	echo -en "."
1800	old_pwd=`pwd`
1801	cd $MINDI_TMP/usb
1802	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1803	for i in memdisk memtest.bin memtest.img ; do
1804	j=$MINDI_LIB/$i
1805	k=$MINDI_TMP/usb
1806	if [ -e "$j" ] ; then
1807	LogIt "Copying $j to $k"
1808	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1809	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1810	fi
1811	done
1812	echo -en "."
1813	MakeSyslinuxMessageFile $MINDI_TMP/usb/message.txt
1814	echo -en "."
1815	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/syslinux/vmlinuz). Did you run out of disk space?"
1816	echo -en "."
1817	cp $MINDI_TMP/mindi.rdz $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1818	echo -en "."
1819	[ -e "$iso_cfg_file" ] \|\| Die "FIXME - unable to find $iso_cfg_file - this should never occur"
1820	cat $sys_cfg_file \| HackSyslinuxFile $ramdisk_size $MINDI_TMP/usb > syslinux.cfg \|\| Die "Cannot copy syslinux.cfg from mindi_home to $MINDI_TMP/usb - did you run out of disk space?"
1821	echo -en "."
1822	if [ "$NFS_DEV" != "" ] ; then
1823	perl -pi -e 's/interactive/iso/' syslinux.cfg
1824	fi
1825	cd $old_pwd
1826	echo -en "."
1827	umount $MINDI_TMP/usb
1828	if [ "$ARCH" != "ia64" ] ; then
1829	syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1830	if [ "$?" -ne "0" ] ; then
1831	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
1832	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1833	LogIt "Failed to create USB image."
1834	else
1835	echo -e "$DONE"
1836	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1837	fi
1838	rm -f $MINDI_TMP/syslinux.log
1839	else
1840	echo "No USB boot support for ia64" \| tee -a $LOGFILE
1841	MindiExit -1
1842	fi
1843	echo -en "."
1844	}
1845
1846
1847	PluralOrNot() {
1848	[ "$1" -gt "1" ] && echo -en "s"
1849	}
1850
1851
1852	MakeMessageFile() {
1853	local disksize
1854	disksize=$1
1855	if [ "`grep -Fi "debian" /etc/issue.net 2> /dev/null`" ] ; then
1856	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 /etc/issue.net` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/
1857	else
1858	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" /etc/issue.net \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/
1859	fi
1860	if [ "$disksize" -gt "2880" ] ; then
1861	if [ _"$MONDO_SHARE" != _"" ] ; then
1862	if [ "$CDRECOVERY" != "yes" ] ; then
1863	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1864	echo -en "Press <enter> to continue.\n"
1865	elif [ ! "$MINDI_TMP" ] ; then
1866	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1867	else
1868	echo -en "$BOOT_MEDIA_MESSAGE"
1869	fi
1870	fi
1871	fi
1872	fi
1873	if [ "$CDRECOVERY" = "yes" ] ; then
1874	echo -en "\
1875	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1876	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1877	fi
1878	echo -en "\n\n\n"
1879	}
1880
1881
1882	write_full_floppy_of_kernel() {
1883	local mtpt image old_pwd res disksize
1884
1885	res=0
1886	old_pwd=`pwd`
1887	KERN_DISK_MADE=1
1888	disksize=$3
1889	rand1=$RANDOM
1890	rand2=$RANDOM
1891	image=$MINDI_TMP/$rand1.$rand2.img
1892	mtpt=$MINDI_TMP/$rand1.$rand2.mtpt
1893	dd if=/dev/zero of=$image bs=1k count=$disksize &> /dev/null
1894	mke2fs -N 26 -F $image &> /dev/null
1895	mkdir -p $mtpt
1896	mount -o loop $image $mtpt
1897	cd $mtpt
1898	mkdir -p {dev,tmp,boot}
1899	cp -f $1 vmlinuz 2>> $LOGFILE
1900	if [ "$?" -ne "0" ] ; then
1901	LogIt "Failed to copy $1 to ramdisk"
1902	cd $old_pwd
1903	umount $mtpt
1904	rmdir $mtpt
1905	rm $image
1906	return 1
1907	fi
1908
1909	rdev vmlinuz 2,0
1910	rdev -R vmlinuz 0
1911	rdev -r vmlinuz 49152
1912
1913	tar -zxf $MINDI_LIB/dev.tgz \|\| LogIt "Cannot untar dev.tgz"
1914	# BERLIOS : Useless and generating errors on CentOS ? (losetup miss a param)
1915	#losetup /dev/loop0 > /dev/null 2> /dev/null
1916	#[ "$?" -eq "0" ] \|\| losetup /dev/loop0 -d \|\| Die "Please free up /dev/loop0 by typing 'losetup /dev/loop0 -d'.\nReboot if necessary."
1917	CopyBootBFile $mtpt/boot.b
1918
1919	MakeLiloConfFile $disksize >> bdlilo.conf
1920
1921	chmod 644 bdlilo.conf
1922	MakeMessageFile $disksize > message
1923	lilo -v -C bdlilo.conf -r $mtpt
1924	res=$?
1925
1926	cd $old_pwd
1927	umount $mtpt
1928	mv -f $image $2
1929	rmdir $mtpt
1930
1931	return $res
1932	}
1933
1934
1935	MakeLiloConfFile() {
1936	local disksize options i ooo
1937	disksize=$1
1938	options=""
1939
1940	if [ "$ARCH" != "ia64" ] ; then
1941	echo -en "boot=/dev/loop0\ndisk=/dev/loop0\n"
1942	fi
1943	if [ "$disksize" -eq "2880" ] ; then
1944	echo -en "bios=0x00\nsectors=36\nheads=2\ncylinders=80\n"
1945	elif [ "$disksize" -eq "1722" ] ; then
1946	echo -en "bios=0x00\nsectors=21\nheads=2\ncylinders=82\n"
1947	elif [ "$disksize" -gt "2880" ] ; then
1948	/bin/true
1949	else
1950	echo -en "bios=0x00\nsectors=18\nheads=2\ncylinders=80\n"
1951	fi
1952	if [ "$ARCH" != "ia64" ] ; then
1953	echo -en "install=/boot.b\nmap=/boot.map\n"
1954	fi
1955	if [ "$CDRECOVERY" = "yes" ] ; then
1956	echo -en "default=RESTORE\n"
1957	elif [ "$disksize" -gt "2880" ] && [ _"$MONDO_SHARE" != _"" ] ; then
1958	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1959	echo -en "default=iso\n"
1960	else
1961	echo -en "default=interactive\n"
1962	fi
1963	else
1964	echo -en "default=expert\n"
1965	fi
1966
1967	echo -en "prompt\n"
1968	if [ "$ARCH" != "ia64" ] ; then
1969	echo -en "vga=normal\nbackup=/dev/null\nmessage=/message\n"
1970	fi
1971	if [ "$CDRECOVERY" != "yes" ] ; then
1972	echo -en "timeout=300\n"
1973	fi
1974	echo -en "\n"
1975	if [ "$CDRECOVERY" = "yes" ] ; then
1976	options="RESTORE expert"
1977	elif [ "$disksize" -gt "2880" ] ; then
1978	if [ _"$MONDO_SHARE" != _"" ] ; then
1979	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1980	options="iso"
1981	else
1982	options="interactive expert compare iso nuke isonuke"
1983	# hda hdb hdc hdd"
1984	fi
1985	else
1986	options="expert"
1987	fi
1988	else
1989	options="expert"
1990	fi
1991	for i in $options ; do
1992	ooo=$i
1993	[ "$ooo" = "RESTORE" ] && ooo="nuke"
1994	if [ "$ARCH" = "ia64" ] ; then
1995	rootpart="root=/dev/ram0\n\t"
1996	else
1997	rootpart=""
1998	fi
1999	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/mindi.rdz\n\t${rootpart}append=\" rw ramdisk=$ramdisksize ramdisk_size=$ramdisksize maxcpus=1 $ooo_mode $ADDITIONAL_BOOT_PARAMS"
2000
2001	outstr=$outstr" $ooo_mode"
2002	outstr=$outstr"\"\n"
2003	if [ "$disksize" = "1440" ] ; then
2004	echo -en "$outstr" \| sed s/initrd=.*// \| grep -v root=
2005	else
2006	echo -en "$outstr"
2007	fi
2008	done
2009	}
2010
2011
2012	PrepareBootDiskImage_LILO() {
2013	local disksize imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
2014	imagesdir=$1
2015	disksize=$2
2016	kernelpath=$3
2017	ramdisksize=$4
2018
2019	retval=0
2020	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
2021	echo -en "Making "$disksize"KB boot disk..."
2022	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize $disksize `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
2023	if [ "$ARCH" != "ia64" ] ; then
2024	[ "$disksize" != "1722" ] && [ "$disksize" != "2880" ] && [ "$disksize" != "$BOOT_SIZE" ] && Die "PDBI - disksize is $disksize - bad size"
2025	fi
2026	echo -en "..."
2027	imagefile=$imagesdir/mindi-bootroot.$disksize.img
2028	mountpoint=$MINDI_TMP/mountpoint.$$
2029	mkdir -p $mountpoint
2030	dd if=/dev/zero of=$imagefile bs=1k count=$disksize &> /dev/null \|\| Die "Cannot dd blank file"
2031	if [ "$ARCH" = "ia64" ] ; then
2032	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
2033	t=vfat
2034	else
2035	mke2fs -N 26 -m 0 -F $imagefile >> $LOGFILE 2>> $LOGFILE
2036	t=ext2
2037	fi
2038	mount -t $t -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
2039	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
2040	mkdir -p $mountpoint/etc
2041	if [ "$ARCH" != "ia64" ] ; then
2042	liloconf=$mountpoint/etc/lilo.conf
2043	else
2044	liloconf=$mountpoint/elilo.conf
2045	fi
2046	old_pwd=`pwd`
2047	cd $mountpoint
2048	if [ "$ARCH" != "ia64" ] ; then
2049	tar -zxf $MINDI_LIB/dev.tgz \|\| LogIt "Cannot untar dev.tgz"
2050	fi
2051	cd $old_pwd
2052	# BERLIOS : Useless and generating errors on CentOS ? (losetup miss a param)
2053	#losetup /dev/loop0 > /dev/null 2> /dev/null
2054	#[ "$?" -eq "0" ] \|\| losetup /dev/loop0 -d \|\| Die "Please free up /dev/loop0 by typing 'losetup /dev/loop0 -d'.\nReboot if necessary."
2055	CopyBootBFile $mountpoint/boot.b
2056
2057	MakeLiloConfFile $disksize > $liloconf
2058
2059	# Copy it so that CD-ROM menu entry is satisfied
2060	if [ "$ARCH" = "ia64" ] ; then
2061	mountefi=0
2062	df -T \| grep /boot/efi \| grep -q vfat
2063	if [ $? -ne 0 ]; then
2064	mount /boot/efi
2065	if [ $? -ne 0 ]; then
2066	echo "You have to mount your EFI partition when using mindi"
2067	MindiExit -1
2068	fi
2069	mountefi=1
2070	fi
2071	el=`find /boot/efi -name elilo.efi`
2072	cp $el $mountpoint
2073	cp $liloconf $mountpoint
2074	if [ $mountefi -eq 1 ]; then
2075	umount /boot/efi 2>&1 > /dev/null
2076	fi
2077	fi
2078
2079	echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint..." >> $LOGFILE
2080	cp -f $MINDI_TMP/mindi.rdz $mountpoint 2>> $LOGFILE
2081	if [ "$?" -ne "0" ] ; then
2082	LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
2083	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2084	LogIt "Please unload some of your modules and try again."
2085	rm -f $MINDI_TMP/mtpt.$$
2086	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
2087	retval=$(($retval+1))
2088	fi
2089	MakeMessageFile $disksize > $mountpoint/message
2090
2091	mkdir -p $mountpoint/tmp
2092	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
2093	if [ -e "$MINDI_LIB/memtest.img" ] ; then
2094	echo -en "image=/memtest.bin\nlabel=memtest\nn" >> $liloconf
2095	echo -en "image=/memdisk\nlabel=memtest\nappend=\"initrd=memtest.img\"\n" >> $liloconf
2096	# echo "Yep, this is a multi-function CD" > $mountpoint/MULTIFUNC
2097	fi
2098
2099	# copy the kernel across
2100	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2101	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2102	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
2103	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
2104	if [ "$?" -ne "0" ] \|\| [ "$FORCE_DUAL_FLOPPIES" = "yes" ] ; then
2105	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
2106	du -sk $mountpoint/* >> $LOGFILE
2107	echo "--- end of list of files ---" >> $LOGFILE
2108	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
2109	Sorry, your kernel is too big for a boot/root floppy.\nI'll try the new boot/root two-disk thingy.\n" >> $LOGFILE
2110	rm -f $mountpoint/vmlinuz
2111	cd $old_pwd
2112	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2113	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
2114	# losetup /dev/loop0 -d
2115	res=0
2116	write_full_floppy_of_kernel $kernelpath $imagesdir/mindi-boot.1440.img 1440
2117	res=$(($res+$?))
2118	cp -f $MINDI_TMP/mindi.rdz $imagesdir/mindi-root.1440.img 2>> $LOGFILE
2119	res=$(($res+$?))
2120	rm -f $imagefile
2121	if [ "$res" -ne "0" ]; then
2122	LogIt "WARNING - failed to create 1.44MB boot/root floppies"
2123	rm -f $imagesdir/mindi-*.1440.img
2124	fi
2125	return $res
2126	fi
2127	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
2128	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
2129	echo "Free space left on floppy = $free_space KB" >> $LOGFILE
2130	echo "Max kernel size on $disksize KB floppy (est'd) = $max_kernel_size K" >> $LOGFILE
2131	# make it bootable
2132	rm -f $mountpoint/zero
2133	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2134	if [ "$disksize" -gt "2880" ] && [ ! "$KERN_DISK_MADE" ] ; then
2135	if [ "$ARCH" != "ia64" ] ; then
2136	$LILO_EXE $LILO_OPTIONS -r $mountpoint >> $LOGFILE 2>> $LOGFILE
2137	else
2138	/bin/true
2139	fi
2140	elif [ ! "$KERN_DISK_MADE" ] ; then
2141	# 12/28/2001 - if 1.72MB floppy then don't use LILO's optimizations at all
2142	$LILO_EXE -r $mountpoint >> $LOGFILE 2>> $LOGFILE
2143	else
2144	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
2145	fi
2146
2147	# BERLIOS does not test necessarily what it expects
2148	if [ $? -ne "0" ] ; then
2149	if [ "`grep -F "/tmp/dev.0" $LOGFILE`" ] ; then
2150	LogIt "The '/tmp/dev.0' error is NOT Mindi's fault. It is LILO's."
2151	LogIt "Please reboot your PC as a workaround."
2152	Die "LILO sneezed and Mindi caught a cold. Please read the README / FAQ."
2153	fi
2154	echo "$LILO_EXE -r $mountpoint ...failed."
2155	echo -en "Press ENTER to continue."; read line
2156	LogIt "Cannot run lilo on $mountpoint\nPlease upgrade/downgrade your version of LILO. It has a bug."
2157	retval=$(($retval+1))
2158	fi
2159	cp -f $liloconf $MINDI_TMP/lilo.conf 2>> $LOGFILE
2160	if [ "$ARCH" = "ia64" ] ; then
2161	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
2162	fi
2163	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2164	echo -en "..."
2165	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
2166	if [ "$retval" -eq "0" ] ; then
2167	echo -en "...$DONE\r"
2168	if [ "$KERN_DISK_MADE" ] ; then
2169	LogIt "... $disksize KB boot disks were created OK\r"
2170	fi
2171	else
2172	echo -en "...failed\r"
2173	LogIt $disksize"KB boot disk was NOT created\r"
2174	rm -f $imagefile
2175	fi
2176	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
2177	return $retval
2178	}
2179
2180
2181	PrepareBootDiskImage_SYSLINUX() {
2182	local disksize imagesdir dev imagefile mountpoint fname i kernelpath ramdisksize cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
2183	imagesdir=$1
2184	disksize=$2
2185	kernelpath=$3
2186	ramdisksize=$4
2187	do_boot_root_thingy=""
2188	local retval old_pwd
2189	retval=0
2190
2191	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
2192	echo -en "Making "$disksize"KB boot disk..."
2193	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/mindi.rdz $ramdisksize $disksize `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into mindi.rdz; are you SURE your kernel supports loopfs?"
2194	[ "$disksize" != "1722" ] && [ "$disksize" != "2880" ] && [ "$disksize" != "$BOOT_SIZE" ] && Die "PDBI - disksize is $disksize - bad size"
2195	echo -en "..."
2196	imagefile=$imagesdir/mindi-bootroot.$disksize.img
2197	mountpoint=$MINDI_TMP/mountpoint.$$
2198	mkdir -p $mountpoint
2199	# If I format a 1722KB data file & run syslinux on it, the resultant image
2200	# won't boot. So, I have formatted a floppy, called syslinux on/to it, and
2201	# used 'dd' to copy it to sys-disk.raw (zipped to sys-disk.raw.gz).
2202	# If I extract it, mount it, copy my files to it, etc. then the resultant
2203	# image _is_ bootable. I don't know why syslinux and/or mkfs.vfat won't
2204	# play nicely and I don't care. :) I have worked around the problem. -Hugo, 06/27/2002
2205	if [ "$disksize" = "1722" ] ; then
2206	gzip -dc $MINDI_LIB/sys-disk.raw.gz > $imagefile \|\| Die "Cannot dd blank file"
2207	else
2208	dd if=/dev/zero of=$imagefile bs=1k count=$disksize &> /dev/null \|\| Die "Cannot dd blank file"
2209	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
2210	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
2211	fi
2212	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
2213
2214	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
2215	old_pwd=`pwd`
2216	MakeSyslinuxMessageFile $mountpoint/message.txt
2217	cd $mountpoint
2218	[ -e "$sys_cfg_file" ] \|\| Die "Obi Wan, word up?"
2219	cat $sys_cfg_file \| HackSyslinuxFile $ramdisk_size $mountpoint > syslinux.cfg \|\| Die "Cannot copy syslinux.cfg from mindi_home to tmp_root"
2220	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2221	mv syslinux.cfg syslinux.cfg.orig
2222	sed s/interactive/iso/ syslinux.cfg.orig > syslinux.cfg
2223	fi
2224	cd $old_pwd
2225	echo "Copying $MINDI_TMP/mindi.rdz to $mountpoint/initrd.img..." >> $LOGFILE
2226	cp -f $MINDI_TMP/mindi.rdz $mountpoint/initrd.img 2>> $LOGFILE
2227	if [ "$?" -ne "0" ] ; then
2228	LogIt "Failed to copy $MINDI_TMP/mindi.rdz to $mountpoint"
2229	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2230	LogIt "Please unload some of your modules and try again."
2231	rm -f $MINDI_TMP/mtpt.$$
2232	LogIt "Cannot incorporate mindi.rdz in bootdisk (kernel / modules too big?)"
2233	retval=$(($retval+1))
2234	fi
2235
2236	mkdir -p $mountpoint/tmp
2237	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp &> /dev/null
2238
2239	# copy the kernel across
2240	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2241	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2242	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
2243	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2244	if [ "$?" -ne "0" ] \|\| [ "$FORCE_DUAL_FLOPPIES" = "yes" ] ; then
2245	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
2246	du -sk $mountpoint/* >> $LOGFILE
2247	echo "--- end of list of files ---" >> $LOGFILE
2248	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
2249	Sorry, your kernel is too big for a boot/root floppy.\nI'll try the new boot/root two-disk thingy.\n" >> $LOGFILE
2250	rm -f $mountpoint/vmlinuz
2251	cd $old_pwd
2252	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2253	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
2254
2255	res=0
2256	write_full_floppy_of_kernel $kernelpath $imagesdir/mindi-boot.1440.img 1440
2257	res=$(($res+$?))
2258	cp -f $MINDI_TMP/mindi.rdz $imagesdir/mindi-root.1440.img 2>> $LOGFILE
2259	res=$(($res+$?))
2260	rm -f $imagefile
2261	if [ "$res" -ne "0" ]; then
2262	LogIt "WARNING - failed to create 1.44MB boot/root floppies"
2263	rm -f $imagesdir/mindi-*.1440.img
2264	fi
2265	return $res
2266	fi
2267	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
2268	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
2269	echo "Free space left on floppy = $free_space KB" >> $LOGFILE
2270	echo "Max kernel size on $disksize KB floppy (est'd) = $max_kernel_size K" >> $LOGFILE
2271
2272	# make it bootable
2273	rm -f $mountpoint/zero
2274	mkdir -p $mountpoint/etc
2275	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2276	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2277	echo -en "..."
2278	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
2279
2280	if [ "$retval" -eq "0" ] ; then
2281	echo -en "...$DONE\r"
2282	if [ "$KERN_DISK_MADE" ] ; then
2283	rm -f $imagefile
2284	LogIt "... $disksize KB boot disks were created OK\r"
2285	fi
2286	else
2287	echo -en "...failed\r"
2288	LogIt $disksize"KB boot disk was NOT created\r"
2289	rm -f $imagefile
2290	fi
2291	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
2292	return $retval
2293	}
2294
2295
2296	PrepareDataDiskImages() {
2297	local needlist bigdir minidir_root tardir diskdir imagesdir res i j k old_pwd lines
2298
2299	imagesdir=$1
2300	rm -f $imagesdir/mindi-.img $imagesdir/[0-9].tar.gz $imagesdir/mindi.iso
2301	needlist=$MINDI_TMP/what-we-need.txt
2302	bigdir=$MINDI_TMP/bigdir
2303	minidir_root=$MINDI_TMP/minidir
2304	mkdir -p $minidir_root
2305	mkdir -p $bigdir/usr/bin
2306	tardir=$MINDI_TMP/tardir
2307
2308	lines=`grep -vx " #." $MINDI_CONF/deplist.txt \| grep -vx "" \| wc -l`
2309	cat $MINDI_CONF/deplist.txt \| GenerateGiantDependencyList $needlist $lines
2310	res=$?
2311	if [ "$YOUR_KERNEL_SUCKS" ]; then
2312	pwd=`pwd`
2313	cd $MINDI_TMP
2314	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
2315	cp --parents -pRdf ./$i $bigdir 2>> $LOGFILE \|\| Die "PDDI can't cp $i->$bigdir"
2316	if [ "`du -sk $i \| cut -f1`" -lt "$(($CHOPSIZE*2))" ] ; then
2317	cp --parents -pRdf $i $bigdir 2>> $LOGFILE
2318	else
2319	ChopUpAndCopyFile $i $bigdir $CHOPSIZE $BIGNO
2320	BIGNO=$(($BIGNO+1))
2321	fi
2322	done
2323	for i in $EXTRA_MODS ; do
2324	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2325	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
2326	for k in $j ; do
2327	if [ "`du -sk $k \| cut -f1`" -lt "$CHOPSIZE" ] ; then
2328	cp --parents -pRdf $k $bigdir 2>> $LOGFILE
2329	else
2330	ChopUpAndCopyFile $k $bigdir $CHOPSIZE $BIGNO
2331	BIGNO=$(($BIGNO+1))
2332	fi
2333	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
2334	done
2335	done
2336	cd $pwd
2337	else
2338	ListKernelModulePaths >> $needlist
2339	fi
2340	if [ "$res" -ne "0" ] ; then
2341	Die "You have $res file`PluralOrNot $res` present in dependency list\nbut absent from filesystem."
2342	fi
2343	FindAndAddUserKeyboardMappingFile
2344	mkdir -p $bigdir/tmp
2345	if [ _"$MONDO_SHARE" != _"" ] ; then
2346	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2347	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2348	fi
2349	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
2350	DropOptimizedLibraries $needlist $bigdir
2351	echo -en "Assembling dependency files"
2352	CopyDependenciesToDirectory < $needlist $bigdir
2353
2354	# also copy io.sys and msdos.sys, if we can find them
2355	for i in `mount \| cut -d' ' -f3` ; do
2356	for j in io.sys msdos.sys ; do
2357	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2358	done
2359	done
2360
2361	# master boot record, too
2362	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2363	if [ "$i" ] ; then
2364	LogIt "Backing up $i's MBR"
2365	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2366	sleep 1
2367	sync
2368	j=$i
2369	[ -h "$j" ] && j=`readlink -f $j`
2370	LogIt "Creating /dev/boot_device ($j)"
2371	mkdir -p $bigdir/dev
2372	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
2373	fi
2374
2375	old_pwd=`pwd`
2376	cd $bigdir
2377
2378	[ -e "$MINDI_LIB/aux-tools" ] \|\| Die "aux-tools not found in Mindi's home dir. Do you have multiple copies of Mindi lying around? Please delete them. No, don't e-mail me and ask how. ;) Use 'rm'."
2379	cp -Rdf $MINDI_LIB/aux-tools/* . 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while unzipping aux-tools"
2380	if [ -e "$MINDI_LIB/x11-tools.tgz" ] ; then
2381	tar -zxf $MINDI_LIB/x11-tools.tgz 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while unzipping x11-tools.tgz"
2382	fi
2383	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2384	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2385	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2386	fi
2387	[ -d "/lib/dev-state" ] && cp --parents -pRdf /lib/dev-state . 2>> $LOGFILE
2388	cd $old_pwd
2389	echo -e "$DONE"
2390	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
2391	SplitDirectoryIntoMinidirs $bigdir $minidir_root
2392	noof_disks=$?
2393	[ "$noof_disks" -eq "0" ] && Die "Too much stuff!"
2394	# if [ "$noof_disks" -ge "8" ] ; then
2395	# LogIt "You are putting a ludicrously large amount of data on these disks."
2396	# LogIt "I shall therefore double EXTRA_SPACE, just in case your ramdisk is too small."
2397	# EXTRA_SPACE=$(($EXTRA_SPACE*2))
2398	# fi
2399	MakeMountlist $MINDI_TMP/mountlist.txt
2400	mkdir -p $minidir_root/$noof_disks/tmp
2401	cp -f $MINDI_TMP/mountlist.txt $minidir_root/$noof_disks/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2402	[ _"$MONDO_SHARE" != _"" ] && cp -f $minidir_root/$noof_disks/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2403	[ $LVM != "false" ] && $MINDI_LIB/analyze-my-lvm > $minidir_root/$noof_disks/tmp/i-want-my-lvm \|\| LVM="false"
2404	cat $minidir_root/$noof_disks/tmp/mountlist.txt >> $LOGFILE
2405	ZipMinidirsIntoTarballs $minidir_root $tardir $noof_disks
2406	CreateDataDiskImagesFromTarballs $tardir $imagesdir $noof_disks
2407	FRIENDLY_OUTSTRING="Boot and data disk images were created."
2408	# One 1.72MB boot disk, one 2.88MB boot disk and $noof_disks data disk images
2409	rmdir $tardir $bigdir
2410	rm -f $needlist
2411	return $noof_disks
2412	}
2413
2414
2415	ProcessLDD() {
2416	local incoming f d nd bd bnd
2417	read incoming
2418	while [ "$incoming" != "" ]; do
2419	# We take the full path name of the dyn. lib. we want
2420	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2421	for f in $incoming ; do
2422	# echo modified file name if one of the parent dir is a link
2423	# by replacing the original dirname by the destination of the link
2424	d="`dirname $f`"
2425	found="false"
2426	while [ "$d" != "/" ]; do
2427	if [ -h "$d" ]; then
2428	nd=`readlink -f $d`
2429	bd=`basename $d`
2430	bnd=`basename $nd`
2431	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
2432	echo $d
2433	fi
2434	d="`dirname $d`"
2435	done
2436
2437	echo "$f"
2438	echo "`ReadAllLink $f`"
2439	done
2440	read incoming
2441	done
2442	}
2443
2444
2445	Prompt() {
2446	echo -en "$1"
2447	read line
2448	}
2449
2450
2451	ReadLine() {
2452	local i incoming
2453	read incoming
2454	i=0
2455	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2456	i=$(($i+1))
2457	read incoming
2458	done
2459	echo "$incoming"
2460	}
2461
2462
2463	RejigHyperlinks() {
2464	local minidir_root noof_disks fname path diskno old_pwd awk_loc gawk_loc dir i
2465	minidir_root=$1
2466	noof_disks=$2
2467
2468	old_pwd=`pwd`
2469	diskno=1
2470	while [ "$diskno" -le "$noof_disks" ] ; do
2471	mkdir -p $minidir_root/$diskno
2472	cd $minidir_root/$diskno
2473	for fname in `find -type d -o -print` ; do
2474	[ -h "$minidir_root/$diskno/$fname" ] && MoveHyperlinkSensibly $fname $minidir_root $diskno $noof_disks
2475	done
2476	diskno=$(($diskno+1))
2477	done
2478
2479	cd $old_pwd
2480	return
2481	}
2482
2483
2484	ReplaceIndividualLine() {
2485	local orig_file new_file lino newstring lines_total lines_remaining
2486
2487	orig_file=$1.orig
2488	mv -f $1 $orig_file \|\| Die "Cannot move $1 to $orig_file"
2489	new_file=$1
2490	lino=$2
2491	newstring="$3"
2492	if [ "$lino" = "" ] \|\| [ "$lino" -lt "1" ] ; then
2493	echo "Can't find string" >> $LOGFILE
2494	return 1
2495	fi
2496	lines_total=`wc -l $orig_file \| $AWK '{print $1;}'`
2497	lines_remaining=$(($lines_total-$lino))
2498	head -n$(($lino-1)) $orig_file > $new_file
2499	echo "$newstring" >> $new_file
2500	echo "# The above line was added by Mindi, at the user's instruction" >> $new_file
2501	tail -n$lines_remaining $orig_file >> $new_file
2502	echo "Replace line $lino of $new_file with user-specified line, '$newstring'" >> $LOGFILE
2503	[ -x "$orig_file" ] && chmod +x $new_file
2504	rm -f $orig_file
2505	return 0
2506	}
2507
2508
2509	ScanCDandTape() {
2510	local i
2511
2512	for i in /dev/st0 /dev/ht0 /dev/cdrom /dev/cdrom0 /dev/cdrom 1 ; do
2513	dd if=$i of=/dev/null bs=64k count=1 &> /dev/null
2514	done
2515	}
2516
2517
2518	SizeOfPartition() {
2519	local devpath drive res stub
2520	device=$1
2521	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
2522	res=`SizeOfRaidPartition $device`
2523	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2524	echo "$res"
2525	return 0
2526	fi
2527	# patch from Bill <bill@iwizard.biz> - 2003/08/25
2528	res=`$FDISK -s $device 2>> $LOGFILE`
2529	# end patch
2530	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
2531	[ "$res" = "" ] && res="-1"
2532	echo $res
2533	return 0
2534	}
2535
2536
2537	SizeOfRaidPartition() {
2538	local real_dev smallest_size silly tmp
2539
2540	silly=999999999
2541	smallest_size=$silly
2542
2543	for real_dev in `GetRaidDevMembers $1` ; do
2544	tmp=`SizeOfPartition $real_dev`
2545	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2546	done
2547
2548	if [ "$smallest_size" = "$silly" ] ; then
2549	echo "-1"
2550	return 1
2551	else
2552	echo "$smallest_size"
2553	return 0
2554	fi
2555	}
2556
2557
2558	StripComments()
2559	{
2560	local tempfile
2561
2562	tempfile=$MINDI_TMP/$$.strip.txt
2563	cp -f $1 $tempfile 2>> $LOGFILE
2564	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2565	rm -f $tempfile
2566	echo "Stripped comments from $2" >> $LOGFILE
2567	}
2568
2569
2570	SplitDirectoryIntoMinidirs() {
2571	local bigdir minidir_root i noof_disks old_pwd res
2572
2573	bigdir=$1
2574	minidir_root=$2
2575	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
2576
2577	TryToFitDataIntoSeveralDirs $bigdir $minidir_root
2578	noof_disks=$?
2579	if [ "$noof_disks" -eq "0" ] ; then
2580	echo "Failed to fit data into several dirs."
2581	return 0
2582	fi
2583	RejigHyperlinks $minidir_root $noof_disks
2584	[ "$bigdir" != "" ] && rm -Rf $bigdir/*
2585	return $noof_disks
2586	}
2587
2588
2589	StripExecutable()
2590	{
2591	local tmpfile
2592
2593	tmpfile=$MINDI_TMP/stripped.$$.dat
2594	[ -d "$1" ] \|\| [ -h "$1" ] && return
2595	cp -f $1 $tmpfile 2>> $LOGFILE
2596	strip $tmpfile 2> /dev/null
2597	if [ "$?" -eq "0" ] ; then
2598	cp -f $tmpfile $1 2>> $LOGFILE
2599	echo "Stripped binary $2" >> $LOGFILE
2600	fi
2601	rm -f $tmpfile
2602	}
2603
2604
2605	TemporarilyCompressAllFiles() {
2606	local i orig_fname out_fname out_list
2607
2608	i=0
2609	out_list=$2/compressed/compressed.txt
2610	mkdir -p $2/compressed
2611	> $out_list
2612	for orig_fname in $1 ; do
2613	out_fname=$2/compressed/$orig_fname.gz
2614	mkdir -p $out_fname 2> /dev/null
2615	rmdir $out_fname 2> /dev/null
2616	gzip -c6 $orig_fname > $out_fname 2> /dev/null
2617	i=$(((($i+1))%15))
2618	[ "$i" -eq "0" ] && echo -en "."
2619	du -sk $out_fname >> $out_list
2620	done
2621	}
2622
2623
2624	TryToFindKernelPath() {
2625	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2626
2627	we_want_version=`uname -r`
2628	possible_kernels=""
2629	duff_kernels=""
2630
2631	if [ "$ARCH" = "ia64" ] ; then
2632	root="/boot/efi/efi"
2633	else
2634	root="/"
2635	fi
2636	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
2637	[ ! -e "$fname" ] && continue
2638	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2639	file $fname \| grep -q gzip
2640	if [ "$?" -eq "0" ] ; then
2641	# Used by ia64
2642	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2643	else
2644	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2645	fi
2646	[ "$fkern_ver" = "" ] && continue
2647	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2648	[ -f "$fname" ] \|\| continue
2649	[ -h "$fname" ] && continue
2650	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2651	file $fname \| grep -q gzip
2652	if [ "$?" -eq "0" ] ; then
2653	# Used by ia64
2654	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2655	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2656	duff_kernels="$fname $duff_kernels"
2657	else
2658	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2659	possible_kernels="$fname $possible_kernels"
2660	fi
2661	else
2662	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2663	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2664	duff_kernels="$fname $duff_kernels"
2665	else
2666	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2667	possible_kernels="$fname $possible_kernels"
2668	fi
2669	fi
2670	done
2671	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2672	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
2673	fi
2674	if [ ! "$possible_kernels" ] ; then
2675	LogIt "No kernel matches exactly. Are there any duff kernels?"
2676	possible_kernels="$duff_kernels"
2677	if [ ! "$possible_kernels" ] ; then
2678	LogIt "Sorry, no duff kernels either"
2679	else
2680	LogIt "I bet you're running Debian or Gentoo, aren't you?"
2681	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2682	fi
2683	fi
2684	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
2685	noof_kernels=`CountItemsIn "$possible_kernels"`
2686	if [ "$noof_kernels" -eq "0" ] ; then
2687	LogIt "Could not find your kernel."
2688	if [ -e "/boot/vmlinuz" ] ; then
2689	LogIt "Using /boot/vmlinuz as a last resort."
2690	output=/boot/vmlinuz
2691	else
2692	output=""
2693	fi
2694	elif [ "$noof_kernels" -eq "1" ] ; then
2695	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
2696	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2697	output="$kernelpath"
2698	else
2699	for i in $possible_kernels ; do
2700	if echo $i \| grep "`uname -r`" ; then
2701	LogIt "OK, I used my initiative and found that "
2702	LogIt "$i is probably your kernel. "
2703	output="$i"
2704	return
2705	fi
2706	done
2707	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
2708	output=/boot/vmlinuz
2709	echo "Schlomo, this one's for you." >> $LOGFILE
2710	else
2711	LogIt "Two or more possible kernels found. You may specify any one of them and the "
2712	LogIt "boot disks will still work, probably. If one does not work, try another."
2713	LogIt "$possible_kernels"
2714	echo ""
2715	fi
2716	fi
2717	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
2718	}
2719
2720
2721	TryToFitDataIntoSeveralDirs() {
2722	local bigdir minidir_root noof_disks diskno list_of_files filename old_pwd progress
2723	local i retval noof_disks total_files list_of_devs
2724
2725	bigdir=$1
2726	minidir_root=$2
2727	BIG_CLUNKY_SIZE_COUNTER=0
2728	retval=0
2729	noof_disks=1
2730
2731	echo -en "\r \rDividing data into several groups..."
2732	old_pwd=`pwd`
2733	cd $bigdir
2734	list_of_files=`GetFileSizeList . \| sort -nr \| cut -f2 \| grep -Fv "/dev/"`
2735	progress=0
2736	total_files=`CountItemsIn "$list_of_files"`
2737	if [ "`echo "$filename" \| grep -x "/dev/.*"`" ] ; then
2738	filesize=1
2739	fi
2740	mkdir -p $minidir_root/$noof_disks
2741	if [ -e "dev" ] ; then
2742	echo "Copying dev/* to $minidir_root/$noof_disks" >> $LOGFILE
2743	cp --parents -pRdf dev $minidir_root/$noof_disks 2>> $LOGFILE
2744	fi
2745	TemporarilyCompressAllFiles "$list_of_files" $minidir_root
2746	for filename in $list_of_files ; do
2747	AddFileToDir $filename $minidir_root $noof_disks
2748	i=$?
2749	if [ "$i" -gt "$noof_disks" ] ; then
2750	noof_disks=$i
2751	echo -en "\r\t\t\t\t\t\t($noof_disks disks)"
2752	fi
2753	if [ "$i" -eq "0" ] ; then
2754	LogIt "Cannot add file $filename to minidir $minidir_root"
2755	retval=$(($retval+1))
2756	fi
2757	progress=$(($progress+1))
2758	echo -en "\r\t\t\t\t\t\t\t\t$(($progress*100/$total_files))% complete\r"
2759	done
2760	cd $old_pwd
2761	echo -en "\rThe files have been subdivided into $noof_disks directories. \r"
2762	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/compressed
2763	if [ "$retval" -gt "0" ] ; then
2764	return 0
2765	else
2766	return $noof_disks
2767	fi
2768	}
2769
2770
2771	TurnTgzIntoRdz() {
2772	local tgz_dir_fname rdz_fname ramdisksize tempfile mountpoint old_pwd nodes disksize kernelsize maxsize res currsize not_copied j k floppy_modules s w
2773
2774	tgz_dir_fname=$1
2775	rdz_fname=$2
2776	ramdisksize=$3
2777	disksize=$4
2778	kernelsize=$5
2779	maxsize=$(($disksize-$kernelsize))
2780	maxsize=$(($maxsize*2)); # to allow for compression of 50%
2781	tempfile=$MINDI_TMP/temp.rd
2782	mountpoint=$MINDI_TMP/mnt1
2783	res=0
2784	echo -en "..."
2785	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2786	echo -en "..."
2787	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2788	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
2789	echo -en "..."
2790	mkdir -p $mountpoint
2791	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2792	echo -en "..."
2793	old_pwd=`pwd`
2794	cd $mountpoint
2795	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2796	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
2797	cd dev \|\| Die "Can't cd to dev"
2798	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
2799	rm -f dev-entries.tgz
2800	cd ..
2801
2802	for w in insmod.static insmod.static.old ; do
2803	s=`which $w 2> /dev/null`
2804	if [ -e "$s" ] ; then
2805	cp --parents -af $s . 2>> $LOGFILE
2806	fi
2807	done
2808
2809	mkdir -p tmp
2810	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2811
2812	# Handle the case where busybox is dynamically linked
2813	# Should be done first so that if /lib64 is a link, it's
2814	# created first like that, instead of as a real dir later on
2815	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
2816	if [ $? -eq 0 ]; then
2817	LocateDeps $MINDI_LIB/rootfs/bin/busybox > $MINDI_TMP/busy.lis
2818	cp --parents -Rdf `sort -u $MINDI_TMP/busy.lis` .
2819	rm -f $MINDI_TMP/busy.lis
2820	fi
2821
2822	# Management of udev (which includes modprobe in rules)
2823	ps auxww \| grep -v grep \| grep -qw udevd
2824	if [ $? -eq 0 ]; then
2825	echo "udev device manager found" > tmp/USE-UDEV
2826	LogIt "udev device manager found"
2827	cp --parents -Rdf /etc/udev . 2> /dev/null
2828	# This avoids NIC remapping if on another machine at restore time on Debian at least
2829	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2830	cp --parents -Rdf /lib/udev /lib64/udev . 2> /dev/null
2831	if [ -x /sbin/udevd ]; then
2832	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
2833	lis=""
2834	# Get only the files which exist in that list
2835	# and potentially their symlink structure
2836	for i in $lis2; do
2837	if [ -h $i ]; then
2838	j=$i
2839	while [ -h $j ]; do
2840	lis="$lis $j"
2841	j=`readlink $j`
2842	done
2843	lis="$lis $j"
2844	elif [ -f $i ]; then
2845	lis="$lis $i"
2846	fi
2847	done
2848	# And their deps
2849	LocateDeps $lis > $MINDI_TMP/udev.lis
2850	for i in $lis; do
2851	if [ "`echo $i \| cut -c1`" = "/" ]; then
2852	j=`echo $i \| cut -c2-`
2853	rm -f $j
2854	fi
2855	done
2856	cp --parents -Rdf $lis `sort -u $MINDI_TMP/udev.lis` .
2857	rm -f $MINDI_TMP/udev.lis
2858	else
2859	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
2860	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
2861	rm -f tmp/USE-UDEV
2862	fi
2863	fi
2864
2865	# Management of potential HW info (Proliant only at the moment)
2866	rm -rf $CACHE_LOC/bkphw
2867	mindi-bkphw $CACHE_LOC $MINDI_CONF \| tee -a $LOGFILE
2868	if [ -d $CACHE_LOC/bkphw ]; then
2869	LogIt "Hardware Information found and saved ..."
2870	cp -rp $CACHE_LOC/bkphw .
2871	lis=`grep -Ev '^#' $CACHE_LOC/tools.files`
2872	LocateDeps $lis > $MINDI_TMP/tools.lis
2873	cp --parents -Rdf $lis `sort -u $MINDI_TMP/tools.lis` .
2874	if [ -f $CACHE_LOC/mindi-rsthw ]; then
2875	mv -f $CACHE_LOC/mindi-rsthw .
2876	chmod 755 ./mindi-rsthw
2877	fi
2878	rm -f $MINDI_TMP/tools.lis $CACHE_LOC/tools.files
2879	fi
2880
2881	for w in cdrom floppy groovy-stuff ; do
2882	mkdir -p mnt/$w
2883	done
2884	#if [ "$RUN_AFTER_INITIAL_BOOT_PHASE" ] ; then
2885	#ReplaceIndividualLine sbin/init `grep -n "#WHOLIVESINAPINEAPPLEUNDERTHESEA#" sbin/init \| cut -d':' -f1` "$RUN_AFTER_INITIAL_BOOT_PHASE"
2886	#fi
2887	if [ "$RUN_AFTER_BOOT_PHASE_COMPLETE" ] ; then
2888	ReplaceIndividualLine sbin/init `grep -n "#ABSORBENTANDYELLOWANDPOROUSISHE#" sbin/init \| cut -d':' -f1` "$RUN_AFTER_BOOT_PHASE_COMPLETE"
2889	fi
2890
2891	cp --parents -Rdf /dev/fd0[1,2][4,7,8] . 2> /dev/null
2892
2893	cd $old_pwd
2894	echo -en "..."
2895	MakeModuleLoadingScript $TMPMODPROBE_FLAG $mountpoint/sbin/insert-all-my-modules
2896	echo -en "..."
2897	old_pwd=`pwd`
2898	if [ "$YOUR_KERNEL_SUCKS" ] ; then
2899	cd $MINDI_TMP
2900	floppy_modules_path=lib/modules/$FAILSAFE_KVER
2901	else
2902	cd /
2903	###
2904	### Sq-Modification... Use kernel name in module path if specified.
2905	###
2906	#floppy_modules_path=lib/modules/`uname -r`
2907	if [ "${kernelname}" != "" ]
2908	then
2909	floppy_modules_path=lib/modules/${kernelname}
2910	else
2911	floppy_modules_path=lib/modules/`uname -r`
2912	fi
2913	###
2914	### Sq-Modification end
2915	###
2916	fi
2917	floppy_modules=""
2918	if [ "$disksize" -lt "2880" ] ; then
2919	list_of_groovy_mods="$FLOPPY_MODS $FORCE_MODS $IDE_MODS ide-scsi sr_mod cdrom isocd isofs `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
2920	else
2921	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS `WhichOfTheseModulesAreLoaded "$SCSI_MODS"`"
2922	fi
2923	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2924	# For PXE boot
2925	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2926	fi
2927	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2928	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2929	fi
2930	for i in $DENY_MODS; do
2931	echo "Removing $i from the list of modules to load" >> $LOGFILE
2932	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2933	done
2934
2935	[ -e "$floppy_modules_path" ] \|\| LogIt "path $floppy_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2936	for i in $list_of_groovy_mods ; do
2937	floppy_modules="$floppy_modules `FindSpecificModuleInPath $floppy_modules_path $i`"
2938	done
2939	for i in $floppy_modules ; do
2940	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
2941	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2942	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2943	cp --parents -pdf $i $mountpoint 2>/dev/null \|\| LogIt "Unable to copy $i to $mountpoint"
2944	# Uncompress modules if not useing udev and native modprobe
2945	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2946	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
2947	gunzip -f $mountpoint/$i
2948	#i=`echo $i \| sed 's/.gz//'`
2949	fi
2950	fi
2951	done
2952
2953	# Also copy modules.dep in case of udev so that normal modprobe works
2954	cp --parents -pdf /$floppy_modules_path/modules.dep $mountpoint 2>/dev/null \|\| LogIt "Unable to copy modules.dep to $mountpoint"
2955
2956	# For all modules supported, create symlinks under the mountpoint
2957	for i in $EXTRA_MODS $NET_MODS $SCSI_MODS; do
2958	all_modules="$all_modules `FindSpecificModuleInPath $mountpoint $i`"
2959	done
2960	for i in $all_modules; do
2961	j=`echo $i \| sed 's~^$mountpoint/~~'`
2962	(cd $mountpoint ; ln -s $i . 2>/dev/null)
2963	done
2964	if [ ! -e "/sbin/devfsd" ] \|\| [ "$disksize" -lt "2880" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2965	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2966	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2967	[ "$disksize" -lt "2880" ] && echo "...because disksize = $disksize" >> $LOGFILE
2968	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2969	rm -f $mountpoint/sbin/devfsd
2970	fi
2971	cd $old_pwd
2972	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2973	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2974	rm -f $mountpoint/zero
2975	if [ _"$MONDO_SHARE" != _"" ] ; then
2976	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2977	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2978	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
2979	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2980	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2981	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2982	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2983	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2984	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2985	fi
2986	mkdir -p $mountpoint/tmp
2987	mkdir -p $mountpoint/proc
2988	echo "$disksize" > $mountpoint/tmp/$disksize.siz
2989	find $mountpoint -name CVS -exec rm -rf '{}' \;
2990	# Determine what filesystem to use for initrd image
2991	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2992	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2993	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2994	case "$gvFileSystem" in
2995	"ext2fs")
2996	# say what will be used
2997	echo "Creating an ext2 initrd image..." >> $LOGFILE
2998	# kernel expects linuxrc in ext2 filesystem
2999	( cd $mountpoint && ln -sf sbin/init linuxrc )
3000	# unmount loop filesystem and create image file using the standard approach
3001	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
3002	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
3003	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
3004	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
3005	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
3006	rm -f ${rdz_fname}.tmp
3007	# log that we are done
3008	echo "...done." >> $LOGFILE
3009	;;
3010	"initramfs")
3011	# say what will be used
3012	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
3013	# make sure that cpio is there
3014	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
3015	# go into filesystem
3016	cd $mountpoint
3017	# kernel expects init in cpio filesystem
3018	ln -sf sbin/init init
3019	# create cpio image file and unmount loop filesystem
3020	find . -print \| cpio -o -H newc \| gzip -9 > $old_pwd/$rdz_fname 2> /dev/null
3021	cd $old_pwd
3022	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
3023	# log that we are done
3024	echo "...done." >> $LOGFILE
3025	;;
3026	*)
3027	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3028	;;
3029	esac
3030	if [ "$res" -eq "0" ] ; then
3031	echo -en "..."
3032	else
3033	echo -en "\rMade an rdz WITH ERRORS. \n"
3034	fi
3035	return 0
3036	}
3037
3038
3039	WhichOfTheseModulesAreLoaded() {
3040	local modname loaded_modules
3041	loaded_modules="$MODULES"
3042	for modname in $1 ; do
3043	[ "`echo "$loaded_modules" \| grep -w "$modname"`" ] && echo "$modname"
3044	done
3045	}
3046
3047
3048	ZipMinidirsIntoTarballs() {
3049	local minidir_root tardir noof_disks diskno old_pwd i
3050	minidir_root=$1
3051	tardir=$2
3052	noof_disks=$3
3053
3054	echo -en "Tarring and zipping the group`PluralOrNot $noof_disks`..."
3055	mkdir -p $tardir
3056	mkdir -p $minidir_root/all
3057	old_pwd=`pwd`
3058	diskno=1
3059	while [ "$diskno" -le "$noof_disks" ] ; do
3060	cd $minidir_root/$diskno \|\| LogIt "WARNING - cannot cd to $minidir_root/$diskno"
3061	tar -cf - . 2>> $LOGFILE \| gzip -9 > $tardir/$diskno.tar.gz \|\| Die "Can't tar/gzip disk#$diskno; please tell Dev Team -exactly- what the errors where."
3062	diskno=$(($diskno+1))
3063	echo -n "..."
3064	cp -pRdf * $minidir_root/all 2>> $LOGFILE
3065	done
3066	mkdir -p $minidir_root/all/tmp
3067	cd $minidir_root/all
3068	size_of_all_tools=`du -sk . \| cut -f1`
3069	if [ _"$MONDO_SHARE" != _"" ]; then
3070	for q in filelist.full.gz biggielist.txt ; do
3071	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
3072	cp -pRdf $MINDI_TMP/$q tmp/ 2>> $LOGFILE
3073	done
3074	mkdir -p $minidir_root/all/tmp
3075	echo -en "$FILES_IN_FILELIST" > $minidir_root/all/tmp/FILES-IN-FILELIST 2> /dev/null
3076	echo -en "$LAST_FILELIST_NUMBER" > $minidir_root/all/tmp/LAST-FILELIST-NUMBER 2> /dev/null
3077	fi
3078	tar -b 4096 -cf - * 2> /dev/null \| gzip -9 > $tardir/all.tar.gz
3079	dd if=/dev/zero bs=1k count=64 >> $imagesdir/all.tar.gz 2> /dev/null
3080	[ "`du -sm $imagesdir/all.tar.gz \| cut -f1`" -ge "30" ] && Die "You have too many tools in your shed"
3081	cd $old_pwd
3082	[ "$minidir_root" != "" ] && rm -Rf $minidir_root
3083	echo -e "$DONE"
3084	}
3085
3086
3087	##############################################################################
3088	#----------------------------------- Main -----------------------------------#
3089	##############################################################################
3090
3091
3092	> $LOGFILE
3093	echo "mindi v$MINDI_VERSION" >> $LOGFILE
3094	echo "$ARCH architecture detected" >> $LOGFILE
3095	echo "mindi called with the following arguments:" >> $LOGFILE
3096	echo "$@" >> $LOGFILE
3097	echo "Start date : `date`" >> $LOGFILE
3098	echo "-----------------------------" >> $LOGFILE
3099
3100	if [ -e "/etc/conf.modules" ] && [ ! -e "/etc/modules.conf" ] ; then
3101	LogIt "WARNING - Ancient distro detected." 1
3102	ln -sf /etc/conf.modules /etc/modules.conf
3103	fi
3104	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
3105
3106	# Log some capital variables
3107	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3108	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
3109	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
3110	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3111	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
3112	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
3113
3114	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3115
3116	# Sanity checks
3117	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
3118	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
3119	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3120	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
3121	if which awk &> /dev/null ; then
3122	if ! which gawk &> /dev/null ; then
3123	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3124	fi
3125	fi
3126	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
3127	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
3128
3129	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3130	# If we have a 2.6 kernel, the system uses module-init-tools which means that we
3131	# may have the modprobe configuration spread out across multiple files in
3132	# directory /etc/modprobe.d. If this is the case we concatenate these files into
3133	# a temporary file for further processing. Otherwise we continue in the standard
3134	# way. Note further that in case /etc/modprobe.d exists, we use it and ignore
3135	# /etc/modprobe.conf which is exactly what module-init-tools does. The temporary
3136	# modprobe.conf file is created in MakeModuleLoadingScript. AL041128.
3137	if [ -d "/etc/modprobe.d" ] && [ "`uname -r \| cut -c1-3`" = "2.6" ] ; then
3138	TMPMODPROBE_FLAG="Y"
3139	else
3140	TMPMODPROBE_FLAG="N"
3141	[ -e "/etc/modprobe.conf" ] && [ ! -e "/etc/modules.conf" ] && ln -sf /etc/modprobe.conf /etc/modules.conf
3142	[ ! -e "/etc/modules.conf" ] && Die "/etc/modules.conf not found; you may have to create a softlink from /etc/conf.modules to /etc/modules.conf; of course, all good distros use modules.conf anyway..."
3143	fi
3144
3145	# Update the PATH variable if incomplete
3146	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3147	PATH=$PATH:/sbin:/usr/sbin
3148	export PATH
3149	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
3150	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
3151	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
3152	fi
3153
3154	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
3155
3156	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3157	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3158	fi
3159
3160	### BERLIOS
3161	### Fix as it's not mandatory on ia64
3162	if [ "$ARCH" = "ia64" ] ; then
3163	if which elilo &> /dev/null ; then
3164	LILO_EXE=elilo
3165	else
3166	LILO_EXE=`which false`
3167	fi
3168	else
3169	FindIsolinuxBinary
3170	FindLiloBinary
3171	fi
3172	# BERLIOS: Remove as too dangerous and now useless
3173	#grep -F " $MINDI_TMP " /proc/mounts \| grep -F tmpfs > /dev/null 2> /dev/null && MINDI_TMP=/home/tmpmondo && mkdir -p $MINDI_TMP && LogIt "Changing MINDI_TMP to $MINDI_TMP because you're using tmpfs for /tmp\n" ; # tmpfs doesn't like Mindi and /tmp, for some reason
3174	trap "Aborted" SIGTERM
3175	DONE="\r\t\t\t\t\t\t\t\tDone. "
3176	CHOPSIZE=240
3177	BIGNO=0
3178	MAX_COMPRESSED_SIZE=1300
3179	kernelpath=""
3180	MONDO_ROOT=/var/cache/mondo
3181	mkdir -p $MONDO_ROOT
3182
3183	if [ -d "/proc/lvm" ]; then
3184	# LVM v1
3185	LVMCMD=""
3186	LVM="v1"
3187	elif [ -d "/dev/mapper" ]; then
3188	# LVM v2
3189	LVMCMD="lvm"
3190	LVM="v2"
3191	else
3192	LVM="false"
3193	fi
3194	echo "LVM set to $LVM" >> $LOGFILE
3195	echo "----------" >> $LOGFILE
3196	echo "mount result:" >> $LOGFILE
3197	echo "-------------" >> $LOGFILE
3198	mount >> $LOGFILE
3199	echo "-------------" >> $LOGFILE
3200	if [ -e /etc/raidtab ]; then
3201	echo "-------------" >> $LOGFILE
3202	echo "/etc/raidtab content:" >> $LOGFILE
3203	echo "-------------" >> $LOGFILE
3204	cat /etc/raidtab >> $LOGFILE
3205	fi
3206	echo "-------------" >> $LOGFILE
3207	echo "cat /proc/cmdline:" >> $LOGFILE
3208	echo "-------------" >> $LOGFILE
3209	cat /proc/cmdline >> $LOGFILE
3210	echo "-------------" >> $LOGFILE
3211	echo "lsmod result:" >> $LOGFILE
3212	echo "-------------" >> $LOGFILE
3213	lsmod >> $LOGFILE
3214	MODULES="`cat /proc/modules \| awk '{print $1}'`"
3215	if [ -x /usr/sbin/esxcfg-module ]; then
3216	echo "-------------" >> $LOGFILE
3217	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
3218	echo "-------------" >> $LOGFILE
3219	echo "VMWare modules" >> $LOGFILE
3220	echo "-------------" >> $LOGFILE
3221	/usr/sbin/esxcfg-module -l >> $LOGFILE
3222	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
3223	fi
3224	echo "-------------" >> $LOGFILE
3225	echo "df result:" >> $LOGFILE
3226	echo "----------" >> $LOGFILE
3227	df -T >> $LOGFILE
3228	echo "-------------" >> $LOGFILE
3229	echo "Liste of extra modules is:" >> $LOGFILE
3230	echo "$EXTRA_MODS" >> $LOGFILE
3231	echo "-------------" >> $LOGFILE
3232
3233	# Compute libata version
3234	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
3235	# If libata v2 is used then remove ide-generic as it will perturbate boot
3236	if [ "`echo $MODULES \| grep libata`" ]; then
3237	if [ "$laver" = "2" ]; then
3238	DENY_MODS="$DENY_MODS ide-generic"
3239	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
3240	echo "-------------" >> $LOGFILE
3241	fi
3242	fi
3243
3244	if [ "$#" -ge "2" ] ; then
3245	if [ "$1" = "--max-compressed-size" ] ; then
3246	MAX_COMPRESSED_SIZE=$2
3247	shift; shift
3248	fi
3249	fi
3250
3251	FLOPPY_WAS_MOUNTED=""
3252	for mtpt in /media/floppy /mnt/floppy /floppy ; do
3253	if mount \| grep -w $mtpt &> /dev/null ; then
3254	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3255	umount $mtpt
3256	fi
3257	done
3258
3259	#
3260	# If we have a USB device we need to store info
3261	# and remove it from the parameters line
3262	#
3263	if [ "$#" -ne "0" ] ; then
3264	if [ "$1" = "--usb" ] ; then
3265	shift
3266	USBDEVICE=$1
3267	if [ _"$USBDEVICE" = _"" ]; then
3268	Die "No USB device specified"
3269	fi
3270	shift
3271	fi
3272	fi
3273
3274	if [ "$#" -ne "0" ] ; then
3275	if [ "$1" = "--findkernel" ] ; then
3276	res=`TryToFindKernelPath`
3277	# Avoids logfile content for mondo
3278	export MONDO_SHARE=""
3279	if [ "$res" = "" ] ; then
3280	MindiExit -1
3281	else
3282	echo "$res"
3283	MindiExit 0
3284	fi
3285	elif [ "$1" = "--locatedeps" ] ; then
3286	[ ! "$2" ] && Die "Please specify the binary to look at"
3287	LocateDeps $2
3288	# Avoids logfile content for mondo
3289	export MONDO_SHARE=""
3290	MindiExit $?
3291	elif [ "$1" = "--readalllink" ] ; then
3292	[ ! "$2" ] && Die "Please specify the binary to look at"
3293	ReadAllLink $2
3294	# Avoids logfile content for mondo
3295	export MONDO_SHARE=""
3296	MindiExit $?
3297	elif [ "$1" = "--makemountlist" ] ; then
3298	[ ! "$2" ] && Die "Please specify the output file"
3299	MakeMountlist $2
3300	# Avoids logfile content for mondo
3301	export MONDO_SHARE=""
3302	MindiExit $?
3303	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
3304	echo "Mindi v$MINDI_VERSION"
3305	# Avoids logfile content for mondo
3306	export MONDO_SHARE=""
3307	MindiExit 0
3308	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3309	MONDO_TMP=$2
3310	# Change MINDI_TMP for the one provided by mondo
3311	# So that it can get back the built files
3312	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
3313	rmdir $MINDI_TMP
3314	export MINDI_TMP=$MONDO_TMP
3315	mkdir -p $MINDI_TMP
3316	# This is the scratch dir in mondo - subdir images
3317	CACHE_LOC=$3
3318	if [ _"$CACHE_LOC" != _"" ]; then
3319	mkdir -p $CACHE_LOC
3320	fi
3321	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3322	###
3323	### Sq-Modification...
3324	### Attempt to locate kernel specific module path
3325	### if module path is found then use it other wise use uname -r to set it...
3326	###
3327	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
3328	LogIt "kernelname = $kernelname"
3329	LogIt "kernelpath = $kernelpath"
3330	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3331	then
3332	LogIt "Module path for ${kernelpath} not found..."
3333	LogIt "using running kernel\'s modules."
3334	kernelname=`uname -r`
3335	else
3336	LogIt "Using modules for kernel: ${kernelname}"
3337	fi
3338	###
3339	### end of Sq-Modification
3340	###
3341	TAPEDEV=$5
3342	TAPESIZE=$6
3343	FILES_IN_FILELIST=$7
3344	USE_LZO=$8
3345	CDRECOVERY=$9
3346	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
3347	IMAGE_DEVS=""
3348	else
3349	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
3350	fi
3351	if [ "${11}" ] ; then
3352	LILO_OPTIONS=""
3353	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
3354	fi
3355	LAST_FILELIST_NUMBER=${12}
3356	ESTIMATED_TOTAL_NOOF_SLICES=${13}
3357	EXCLUDE_DEVS="${14}"
3358	USE_COMP="${15}"
3359	USE_LILO="${16}"
3360	USE_STAR="${17}"
3361	INTERNAL_TAPE_BLOCK_SIZE="${18}"
3362	DIFFERENTIAL="${19}"
3363	USE_GZIP="${20}"
3364	NOT_BOOT="${21}"
3365	[ "$USE_COMP" = "" ] && USE_COMP=yes
3366	[ "$USE_GZIP" = "" ] && USE_GZIP=no
3367	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3368	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
3369	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3370	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
3371	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3372	then
3373	LogIt "Module path for ${kernelpath} not found..."
3374	LogIt "using running kernel\'s modules."
3375	kernelname=`uname -r`
3376	else
3377	LogIt "Using modules for kernel: ${kernelname}"
3378	fi
3379	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
3380	# MONDO_ROOT is the real scratchdir
3381	MONDO_ROOT=`echo $CACHE_LOC \| sed 's/\(.\)\/./\1/'`
3382	if [ _"$MONDO_ROOT" != _"" ]; then
3383	mkdir -p $MONDO_ROOT
3384	else
3385	Die "MONDO_ROOT is undefined"
3386	fi
3387	else
3388	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
3389	MindiExit -1
3390	fi
3391	fi
3392	#ScanCDandTape
3393	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
3394	if [ "$CDRECOVERY" = "yes" ] ; then
3395	iso_cfg_file=$MINDI_LIB/isolinux-H.cfg
3396	sys_cfg_file=$MINDI_LIB/syslinux-H.cfg
3397	else
3398	iso_cfg_file=$MINDI_LIB/isolinux.cfg
3399	sys_cfg_file=$MINDI_LIB/syslinux.cfg
3400	fi
3401
3402	[ -e "$iso_cfg_file" ] \|\| Die "Cannot find $iso_cfg_file"
3403	if [ _"$MONDO_SHARE" = _"" ]; then
3404	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3405	LogIt "Latest Mindi is available from http://www.mondorescue.org"
3406	LogIt "BusyBox sources are available from http://www.busybox.net"
3407	LogIt "------------------------------------------------------------------------------"
3408	else
3409	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
3410	fi
3411	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3412	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
3413	else
3414	LogIt "Unable to find mindi-busybox, please install it"
3415	MindiExit -1
3416	fi
3417
3418	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
3419	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
3420	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3421	insmod $i >> $LOGFILE 2>> $LOGFILE
3422	done
3423
3424	KERN_DISK_MADE=""
3425
3426	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
3427	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
3428	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
3429	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3430	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3431	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3432	MakeMountlist $MINDI_TMP/mountlist.txt
3433	mkdir -p $MINDI_TMP/small-all/tmp
3434	cd $MINDI_TMP/small-all
3435	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
3436	tar -cv tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
3437	sleep 2
3438	LogIt "Done. Exiting."
3439	MindiExit 0
3440	fi
3441
3442	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3443	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
3444	fi
3445
3446	if [ "$kernelpath" = "" ] ; then
3447	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3448	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3449	read ch
3450	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3451	USE_OWN_KERNEL="yes"
3452	else
3453	USE_OWN_KERNEL="no"
3454	fi
3455	if [ "$USE_OWN_KERNEL" = "yes" ]; then
3456	YOUR_KERNEL_SUCKS=""
3457	kernelpath=`TryToFindKernelPath`
3458	if [ "$kernelpath" = "" ] ; then
3459	echo -n "Please enter kernel path : "
3460	read kernelpath
3461	fi
3462	else
3463	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3464	fi
3465	fi
3466	if [ _"$MONDO_SHARE" = _"" ] && [ "$ARCH" != "ia64" ]; then
3467	echo -en "Would you like to use LILO (instead of syslinux)\nfor your boot CD/floppies (y/[n]) ?"
3468	read ch
3469	if [ "$ch" != "y" ] && [ "$ch" != "Y" ] ; then
3470	USE_LILO=no
3471	else
3472	USE_LILO=yes
3473	fi
3474	fi
3475	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
3476	kernelpath=$MINDI_LIB/vmlinuz
3477	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3478	LogIt "However, you are still running your kernel. If Mindi fails to create your"
3479	LogIt "disks then it may still be a result of a problem with your kernel."
3480	pwd=`pwd`
3481	cd $MINDI_TMP
3482	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
3483	cd $pwd
3484	YOUR_KERNEL_SUCKS="Your kernel sucks"
3485	fi
3486	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$CACHE_LOC" >> $LOGFILE
3487	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
3488
3489	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3490
3491	PrepareDataDiskImages $CACHE_LOC
3492	noof_disks=$?
3493	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3494	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3495	ramdisk_size=$rds
3496
3497	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
3498	if [ "$ARCH" = "ia64" ] ; then
3499	PrepareBootDiskImage_LILO $CACHE_LOC $BOOT_SIZE $kernelpath $ramdisk_size \|\| Die "Failed to create ia64 floppy disk image."
3500	else
3501	if [ "$USE_LILO" = "yes" ] ; then
3502	if ! PrepareBootDiskImage_LILO $CACHE_LOC 1722 $kernelpath $ramdisk_size ; then
3503	LogIt "WARNING - failed to create 1.72MB boot image."
3504	LogIt "Please reduce your kernel's size if you want to make a 1.72MB floppy disk."
3505	fi
3506	if ! PrepareBootDiskImage_LILO $CACHE_LOC 2880 $kernelpath $ramdisk_size ; then
3507	LogIt "WARNING - failed to create 2.88MB floppy disk image."
3508	LogIt "Please reduce your kernel's size if you want to make a 2.88MB floppy disk."
3509	PrepareBootDiskImage_LILO $CACHE_LOC $BOOT_SIZE $kernelpath $ramdisk_size \|\| Die "Failed to create 2.88MB floppy disk image."
3510	fi
3511	else
3512	if ! PrepareBootDiskImage_SYSLINUX $CACHE_LOC 1722 $kernelpath $ramdisk_size ; then
3513	LogIt "WARNING - failed to create 1.72MB boot image."
3514	LogIt "Please reduce your kernel's size if you want to make a 1.72MB floppy disk."
3515	if ! PrepareBootDiskImage_SYSLINUX $CACHE_LOC 2880 $kernelpath $ramdisk_size ; then
3516	LogIt "WARNING - failed to create 2.88MB floppy disk image."
3517	LogIt "Please reduce your kernel's size if you want to make a 2.88MB floppy disk."
3518	PrepareBootDiskImage_SYSLINUX $CACHE_LOC $BOOT_SIZE $kernelpath $ramdisk_size \|\| Die "Failed to create $BOOT_SIZE kB floppy disk image."
3519	fi
3520	fi
3521	fi
3522	fi
3523
3524	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3525	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3526
3527	if [ _"$MONDO_SHARE" = _"" ]; then
3528	ListImagesForUser $CACHE_LOC
3529	boot_dev=/dev/fd0u1722
3530	[ ! -e "$boot_dev" ] && mknod $boot_dev b 2 60
3531	[ ! -e "$boot_dev" ] && boot_dev=/dev/fd0H1722
3532	[ ! -e "$boot_dev" ] && Die "Oh Lord, will you PLEASE tell the vendor to create the 1.72MB devices in /dev?"
3533	if [ "$PROMPT_WRITE_BOOT_FLOPPIES" = "yes" ]; then
3534	OfferToCopyImagesToDisks $CACHE_LOC $boot_dev $FDDEVICE
3535	fi
3536	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3537	OfferToMakeBootableUSB $CACHE_LOC
3538	fi
3539	OfferToMakeBootableISO $CACHE_LOC
3540	LogIt "Finished."
3541	elif [ "$TAPEDEV" ] ; then
3542	OfferToMakeBootableISO $CACHE_LOC
3543	if [ -e "$CACHE_LOC/all.tar.gz" ] ; then
3544	cp -f $CACHE_LOC/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3545	else
3546	Die "Cannot find all.tar.gz, to be written to tape"
3547	fi
3548	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3549	OfferToMakeBootableUSB $CACHE_LOC
3550	else
3551	OfferToMakeBootableISO $CACHE_LOC
3552	fi
3553	# cleanup
3554	LogIt "$FRIENDLY_OUTSTRING"
3555	for mtpt in $FLOPPY_WAS_MOUNTED ; do
3556	mount $mtpt
3557	done
3558	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: