Ticket #714: mondorestore-3.0.4.log

10:13 Preparing udev environment...
10:13 Discovering with udevsettle
10:13 Extracted additional /dev entries OK.     
10:13 Redirecting serial  to /dev/tty
10:14 Engaging /proc/driver/cciss/cciss0
10:14 ...result=0
10:14 Trying 'mount /dev/shm -t tmpfs -o size=256m'
10:14 Great. Pivot succeeded w/ size=256m
10:14 Successfully mounted dynamic /tmp ramdisk
10:14 find-and-mount-cdrom --- starting
10:14 Trying /dev/hda
10:14 It's not in /dev/hda; I'll keep looking
10:14 Trying /dev/hdb
10:14 It's not in /dev/hdb; I'll keep looking
10:14 Trying /dev/hdc
10:14 It's not in /dev/hdc; I'll keep looking
10:14 Trying /dev/hdd
10:14 It's not in /dev/hdd; I'll keep looking
10:14 Trying /dev/hde
10:14 It's not in /dev/hde; I'll keep looking
10:14 Trying /dev/hdf
10:14 It's not in /dev/hdf; I'll keep looking
10:14 Trying /dev/hdg
10:14 It's not in /dev/hdg; I'll keep looking
10:14 Trying /dev/hdh
10:14 It's not in /dev/hdh; I'll keep looking
10:14 Trying /dev/scd0
10:14 /dev/scd0 has a CD-ROM in it
10:14 CD-ROM found at /dev/scd0
10:14 /dev/scd0 is where the Mondo CD lives.
10:14 CD-ROM found and mounted at /dev/scd0
10:14 find-and-mount-cdrom --- leaving (0)
10:14 OK, I am running on a CD-ROM. Good.
10:14 Installing additional tools ...
10:14 Starting install-additional-tools
10:14 PLEASE WAIT. Untarring data content
10:14 Populating / with tar file content...
10:14 Installing and removing BOOTLOADER.DEVICE
BOOTLOADER.MBR
BOOTLOADER.NAME
BOOTLOADER.VER
FILES-IN-FILELIST
LAST-FILELIST-NUMBER
bin
dev
etc
lib
lib64
mondo
sbin
tmp
usr
10:14 Done.
10:14 Exiting install-additional-tools
10:14 WARNING: Unable to find udevadm. Not triggering udev
10:14 klogd and syslogd have been started.
10:14 Using /lib/kbd/keymaps/i386/qwerty/uk.map.gz keyboard map.
10:14 RAID controller(s) detected. Pausing 10 seconds to let them warm up.
10:15 Scanning LVM's...
10:15 LVM's have been started.
10:15 OK, we've found /mnt/cdrom/archives/*; great.
10:15 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs
10:15 Done re-jigging. Yay.
10:15 init (from mindi v2.1.6-r3177)
10:15 /proc/cmdline is:
10:15 ----------
initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz 
10:15 ----------
10:15 df result:
10:15 ----------
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs                  153547     64632     87277  43% /
/dev/root               153547     64632     87277  43% /
none                      5120       216      4904   5% /dev
none                  24727032         0  24727032   0% /dev/shm
/dev/shm                262144       340    261804   1% /tmp
/dev/scd0               380294    380294         0 100% /mnt/cdrom
10:15 -------------
10:15 mount result:
10:15 -------------
rootfs on / type rootfs (rw)
/dev/root on / type ext2 (rw)
/proc/ on /proc type proc (rw)
/sys/ on /sys type sysfs (rw)
none on /proc/bus/usb type usbfs (rw)
none on /dev type tmpfs (rw)
none on /dev/pts type devpts (rw)
none on /dev/shm type tmpfs (rw)
/dev/shm on /tmp type tmpfs (rw)
/dev/scd0 on /mnt/cdrom type iso9660 (ro)
nfsd on /proc/fs/nfsd type nfsd (rw)
10:15 -------------
10:15 lsmod result:
10:15 -------------
Module                  Size  Used by
zlib_deflate           52825  0 
configfs               62045  0 
ext3                  169553  0 
xfs                   507601  0 
jbd                    95025  1 ext3
nfsd                  287209  1 
msdos                  42689  0 
ext4                  298265  0 
jbd2                   97481  1 ext4
crc16                  35137  1 ext4
acpi_memhotplug        40517  0 
video                  53197  0 
wmi                    41985  0 
power_meter            47053  0 
battery                43849  0 
ac                     38729  0 
button                 40545  0 
asus_acpi              50917  0 
tpm_tis                48077  0 
tpm                    50273  1 tpm_tis
tpm_bios               40897  1 tpm
lp                     47121  0 
hpilo                  44497  0 
backlight              39873  1 video
shpchp                 70893  0 
i7core_edac            46793  0 
edac_mc                60449  1 i7core_edac
pcspkr                 36289  0 
serio_raw              40517  0 
multipath              42177  0 
linear                 38593  0 
raid10                 55873  0 
raid1                  56129  0 
dm_rdac                41673  0 
raid0                  40513  0 
raid456               152417  0 
dm_hp_sw               36673  0 
dm_zero                35265  0 
dm_snapshot            52361  0 
dm_emc                 39105  0 
dm_round_robin         36801  0 
dm_multipath           56921  4 dm_rdac,dm_hp_sw,dm_emc,dm_round_robin
xor                    38865  1 raid456
dm_mirror              54865  0 
dm_log                 44993  1 dm_mirror
dm_mod                101777  12 dm_zero,dm_snapshot,dm_multipath,dm_mirror,dm_log
hwmon                  36553  1 power_meter
ib_iser                68161  0 
rdma_cm                68689  1 ib_iser
ib_cm                  72809  1 rdma_cm
iw_cm                  43465  1 rdma_cm
ib_sa                  74953  2 rdma_cm,ib_cm
ib_addr                41673  1 rdma_cm
ib_mad                 70629  2 ib_cm,ib_sa
ib_core               104901  6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
ppa                    46417  0 
parport_pc             62313  0 
imm                    47065  0 
bnx2i                  76385  0 
cnic                   79577  1 bnx2i
ipv6                  435105  71 cnic
xfrm_nalgo             43333  1 ipv6
crypto_api             42945  1 xfrm_nalgo
paride                 42433  0 
parport                73165  5 lp,ppa,parport_pc,imm,paride
auth_rpcgss            81889  1 nfsd
vfat                   46529  0 
nls_utf8               35137  1 
nls_iso8859_1          38209  0 
nfs                   298413  0 
nfs_acl                36673  2 nfsd,nfs
lockd                 101553  2 nfsd,nfs
sunrpc                200073  5 nfsd,auth_rpcgss,nfs,nfs_acl,lockd
fuse                   83057  0 
fscache                52385  1 nfs
fat                    85745  2 msdos,vfat
exportfs               38849  1 nfsd
virtio_pci             41673  0 
virtio_ring            37953  1 virtio_pci
virtio_balloon         41025  0 
usbserial              67377  0 
ohci_hcd               56181  0 
sym53c8xx             109545  0 
st                     72805  0 
sd_mod                 56513  0 
qla2xxx              1222785  0 
qla1280               150993  0 
osst                   84977  0 
megaraid_sas           88713  0 
megaraid_mbox          65873  0 
megaraid_mm            44921  1 megaraid_mbox
megaraid               73897  0 
iscsi_tcp              50509  0 
ide_scsi               51017  0 
scsi_dh_emc            42305  0 
scsi_dh_alua           42305  0 
scsi_dh                42177  3 dm_multipath,scsi_dh_emc,scsi_dh_alua
dc395x                 67661  0 
cxgb3i                 77873  0 
libiscsi_tcp           53317  2 iscsi_tcp,cxgb3i
be2iscsi               94045  0 
libiscsi2              77765  6 ib_iser,bnx2i,iscsi_tcp,cxgb3i,libiscsi_tcp,be2iscsi
scsi_transport_iscsi2    73945  6 ib_iser,bnx2i,iscsi_tcp,cxgb3i,be2iscsi,libiscsi2
scsi_transport_iscsi    35017  1 scsi_transport_iscsi2
atp870u                64161  0 
arcmsr                 58049  0 
aic7xxx               162681  0 
aic79xx               202777  0 
aacraid               107081  0 
3w_xxxx                60257  0 
3w_9xxx                70629  0 
virtio_net             48193  0 
tg3                   161737  0 
r8169                  76613  0 
libphy                 53825  0 
pcnet32                68933  0 
ne2k_pci               44961  0 
igb                   128341  0 
forcedeth              90317  0 
e100                   70609  0 
e1000                 161365  0 
cxgb3                 214705  1 cxgb3i
uio                    45777  1 cnic
bnx2                  222925  0 
be2net                 85325  0 
8390                   43589  1 ne2k_pci
8139too                61377  0 
8139cp                 58049  0 
3c59x                  79861  0 
mii                    38849  6 r8169,pcnet32,e100,8139too,8139cp,3c59x
i2o_block              46817  0 
i2o_core               78969  1 i2o_block
mptspi                 54609  0 
scsi_transport_spi     59841  4 sym53c8xx,aic7xxx,aic79xx,mptspi
mptsas                 84689  0 
scsi_transport_sas     68929  1 mptsas
mptfc                  52553  0 
mptscsih               69825  3 mptspi,mptsas,mptfc
scsi_transport_fc      83145  2 qla2xxx,mptfc
mptctl                 65097  0 
mptbase               122885  5 mptspi,mptsas,mptfc,mptscsih,mptctl
ide_cs                 44481  0 
ide_cd                 73825  0 
edd                    43337  0 
dca                    41605  1 igb
virtio_blk             41673  0 
virtio                 39365  4 virtio_pci,virtio_balloon,virtio_net,virtio_blk
loop                   48721  0 
sata_via               44101  0 
sata_svw               40901  0 
sata_promise           48325  0 
sata_nv                62025  0 
pata_sis               48197  0 
pata_sil680            42693  0 
pata_marvell           38977  0 
ata_piix               57285  0 
ahci                   73293  0 
libata                209233  9 sata_via,sata_svw,sata_promise,sata_nv,pata_sis,pata_sil680,pata_marvell,ata_piix,ahci
sr_mod                 50789  1 
cdrom                  68713  2 ide_cd,sr_mod
sg                     70649  0 
usb_storage           122913  1 
bnx2x                 638593  0 
cciss                 109129  2 
scsi_mod              199641  45 dm_rdac,dm_hp_sw,ib_iser,ppa,imm,bnx2i,sym53c8xx,st,sd_mod,qla2xxx,qla1280,osst,megaraid_sas,megaraid_mbox,megaraid,iscsi_tcp,ide_scsi,scsi_dh_emc,scsi_dh_alua,scsi_dh,dc395x,cxgb3i,be2iscsi,libiscsi2,scsi_transport_iscsi2,atp870u,arcmsr,aic7xxx,aic79xx,aacraid,3w_xxxx,3w_9xxx,mptspi,scsi_transport_spi,mptsas,scsi_transport_sas,mptfc,mptscsih,scsi_transport_fc,mptctl,libata,sr_mod,sg,usb_storage,cciss
8021q                  57937  5 igb,forcedeth,cxgb3,be2net,bnx2x
mdio                   38465  1 bnx2x
ehci_hcd               65997  0 
e1000e                168217  0 
uhci_hcd               57433  0 
10:15 -------------
10:15 dmesg result:
10:15 -------------
Linux version 2.6.18-238.el5 (mockbuild@ca-build10.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Jan 4 15:41:11 EST 2011
Command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000df62f000 (usable)
 BIOS-e820: 00000000df62f000 - 00000000df63c000 (ACPI data)
 BIOS-e820: 00000000df63c000 - 00000000df63d000 (usable)
 BIOS-e820: 00000000df63d000 - 00000000e4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000c1ffff000 (usable)
DMI 2.6 present.
ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f00
ACPI: XSDT (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df630080
ACPI: FADT (v003 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df630180
ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000df62f140
ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x00000000df62f1c0
ACPI: HPET (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df62f200
ACPI: FFFF (v002 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000df62f240
ACPI: SPMI (v005 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f2c0
ACPI: ERST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f300
ACPI: MADT (v001 HP     ProLiant 0x00000002  0x00000000) @ 0x00000000df62f500
ACPI: SRAT (v001 HP     Proliant 0x00000001 Ò 0x0000162e) @ 0x00000000df62f680
ACPI: FFFF (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fc00
ACPI: BERT (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fd80
ACPI: HEST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fdc0
ACPI: DMAR (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000df62fe80
ACPI: SSDT (v003     HP  CRSPCI0 0x00000002 HP 0x00000001) @ 0x00000000df632240
ACPI: SSDT (v001     HP      pcc 0x00000001 INTL 0x20090625) @ 0x00000000df632380
ACPI: SSDT (v001     HP     pmab 0x00000001 INTL 0x20090625) @ 0x00000000df632740
ACPI: SSDT (v001  INTEL PPM RCM  0x00000001 INTL 0x20061109) @ 0x00000000df632ac0
ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
SRAT: Node 0 PXM 0 0-e0000000
SRAT: Node 0 PXM 0 0-620000000
SRAT: Node 1 PXM 1 620000000-c20000000
NUMA: Using 29 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000620000000
Bootmem setup node 1 0000000620000000-0000000c1ffff000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 6199489
  DMA zone: 2393 pages, LIFO batch:0
  DMA32 zone: 896616 pages, LIFO batch:31
  Normal zone: 5300480 pages, LIFO batch:31
On node 1 totalpages: 6205440
  Normal zone: 6205440 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
Processor #16 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Processor #0 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] enabled)
Processor #4 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Processor #18 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Processor #2 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
Processor #22 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x06] enabled)
Processor #6 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Processor #17 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Processor #21 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
Processor #5 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Processor #19 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Processor #3 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
Processor #23 7:10 APIC version 21
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] enabled)
Processor #7 7:10 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000df62f000 - 00000000df63c000
Nosave address range: 00000000df63d000 - 00000000e4000000
Nosave address range: 00000000e4000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fee10000
Nosave address range: 00000000fee10000 - 00000000ff800000
Nosave address range: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
SMP: Allowing 32 CPUs, 16 hotplug CPUs
Built 2 zonelists.  Total pages: 12404929
Kernel command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=163840 nuke devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x70a1000 - 0xb0a1000
Memory: 49438732k/50855932k available (2592k kernel code, 882412k reserved, 1649k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.99 BogoMIPS (lpj=2533497)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/10 -> Node 1
using mwait in idle threads.
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 8.333 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/16 APIC 0x0
Initializing CPU#1
Calibrating delay using timer specific routine.. 5066.82 BogoMIPS (lpj=2533413)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/16 APIC 0x14
Initializing CPU#2
Calibrating delay using timer specific routine.. 5066.89 BogoMIPS (lpj=2533445)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/14 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/16 APIC 0x4
Initializing CPU#3
Calibrating delay using timer specific routine.. 5066.98 BogoMIPS (lpj=2533492)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/4 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 4/16 APIC 0x12
Initializing CPU#4
Calibrating delay using timer specific routine.. 5066.80 BogoMIPS (lpj=2533401)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/12 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 5/16 APIC 0x2
Initializing CPU#5
Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533407)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 6/16 APIC 0x16
Initializing CPU#6
Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533405)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/16 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 7/16 APIC 0x6
Initializing CPU#7
Calibrating delay using timer specific routine.. 5066.84 BogoMIPS (lpj=2533420)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/6 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 8/16 APIC 0x11
Initializing CPU#8
Calibrating delay using timer specific routine.. 5066.80 BogoMIPS (lpj=2533403)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 8/11 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 9/16 APIC 0x1
Initializing CPU#9
Calibrating delay using timer specific routine.. 5066.83 BogoMIPS (lpj=2533416)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 9/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU9: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 10/16 APIC 0x15
Initializing CPU#10
Calibrating delay using timer specific routine.. 5066.81 BogoMIPS (lpj=2533405)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 10/15 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU10: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 11/16 APIC 0x5
Initializing CPU#11
Calibrating delay using timer specific routine.. 5066.83 BogoMIPS (lpj=2533419)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 11/5 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU11: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 12/16 APIC 0x13
Initializing CPU#12
Calibrating delay using timer specific routine.. 5066.77 BogoMIPS (lpj=2533386)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 12/13 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU12: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 13/16 APIC 0x3
Initializing CPU#13
Calibrating delay using timer specific routine.. 5066.85 BogoMIPS (lpj=2533425)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 13/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU13: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 14/16 APIC 0x17
Initializing CPU#14
Calibrating delay using timer specific routine.. 5066.88 BogoMIPS (lpj=2533440)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 14/17 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU14: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 15/16 APIC 0x7
Initializing CPU#15
Calibrating delay using timer specific routine.. 5066.97 BogoMIPS (lpj=2533486)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 15/7 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU15: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 05
Brought up 16 CPUs
CPU#0: NMI watchdog performance counter calibration - 1258->1279
CPU#1: NMI watchdog performance counter calibration - 41->53
CPU#2: NMI watchdog performance counter calibration - 66->87
CPU#3: NMI watchdog performance counter calibration - 40->53
CPU#4: NMI watchdog performance counter calibration - 66->87
CPU#5: NMI watchdog performance counter calibration - 40->52
CPU#6: NMI watchdog performance counter calibration - 66->87
CPU#7: NMI watchdog performance counter calibration - 39->52
CPU#8: NMI watchdog performance counter calibration - 64->85
CPU#9: NMI watchdog performance counter calibration - 39->51
CPU#10: NMI watchdog performance counter calibration - 64->85
CPU#11: NMI watchdog performance counter calibration - 38->51
CPU#12: NMI watchdog performance counter calibration - 63->84
CPU#13: NMI watchdog performance counter calibration - 38->51
CPU#14: NMI watchdog performance counter calibration - 63->84
CPU#15: NMI watchdog performance counter calibration - 38->50
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2533.497 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=9,33,1140
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15104k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
Warning: pci_mmcfg_init marking 256MB space uncacheable.
MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
DMAR:Host address width 39
DMAR:DRHD base: 0x000000e7ffe000 flags: 0x1
IOMMU e7ffe000: ver 1:0 cap c90780106f0462 ecap f0207e
DMAR:RMRR base: 0x000000df7fd000 end: 0x000000df7fefff
DMAR:RMRR base: 0x000000df7f6000 end: 0x000000df7fbfff
DMAR:RMRR base: 0x000000df63e000 end: 0x000000df63ffff
DMAR:ATSR flags: 0x0
DMAR:Device scope device [0000:00:06.00] not found
DMAR:Device scope device [0000:00:06.00] not found
DMAR:Device scope device [0000:00:05.00] not found
DMAR:Device scope device [0000:00:05.00] not found
DMAR:Device scope device [0000:00:04.00] not found
DMAR:Device scope device [0000:00:04.00] not found
PCI-GART: No AMD northbridge found.
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x71f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xe3ffffff could not be reserved
pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pnp: 00:01: iomem range 0xe7ffe000-0xe7ffffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f3800000-fb7fffff
  PREFETCH window 0x00000000e6000000-0x00000000e60fffff
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
  IO window: 4000-4fff
  MEM window: fb900000-fbafffff
  PREFETCH window 0x00000000e6100000-0x00000000e61fffff
PCI: Bridge: 0000:00:0a.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: 5000-5fff
  MEM window: fbb00000-fbffffff
  PREFETCH window 0x00000000e6200000-0x00000000e62fffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-3fff
  MEM window: f3600000-f37fffff
  PREFETCH window 0x00000000e8000000-0x00000000efffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1378289626.392:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 895817073326F70
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:03.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU8 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU4 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU12 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU10 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU6 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU14 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU9 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU5 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU13 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU11 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU7 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU15 (power states: C1[C1] C2[C3] C3[C3])
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
Initalizing network drop monitor service
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 519k
USB Universal Host Controller Interface driver v3.0
GSI 17 sharing vector 0x3A and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 58, io base 0x00001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCSI subsystem initialized
Floppy drive(s): fd0 is 1.44M
HP CISS Driver (v 3.6.22-RH1)
Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.53-4 (2010/16/08)
GSI 18 sharing vector 0x42 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 66, io base 0x00001020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x4A and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 74, io base 0x00001040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 66, io base 0x00001060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 74
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 74, io base 0x00003800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
e1000e 0000:09:00.0: Disabling ASPM  L1
GSI 20 sharing vector 0x52 and IRQ 20
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 32 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:09:00.0 to 64
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 58, io mem 0xf35f0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 8 ports detected
eth0: (PCI Express:2.5GB/s:Width x4) 00:1b:78:2a:86:8e
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 0, PHY: 1, PBA No: d95140-009
e1000e 0000:09:00.1: Disabling ASPM  L1
GSI 21 sharing vector 0x62 and IRQ 21
ACPI: PCI Interrupt 0000:09:00.1[B] -> GSI 42 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:09:00.1 to 64
GSI 22 sharing vector 0x72 and IRQ 22
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 28 (level, low) -> IRQ 114
PCI: Setting latency timer of device 0000:02:00.0 to 64
bnx2x 0000:02:00.0: part number 412F4E-0-0-0
bnx2x 0000:02:00.0: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 114, node addr d4:85:64:5c:ca:e0
GSI 23 sharing vector 0x7A and IRQ 23
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 40 (level, low) -> IRQ 122
PCI: Setting latency timer of device 0000:02:00.1 to 64
bnx2x 0000:02:00.1: part number 412F4E-0-0-0
bnx2x 0000:02:00.1: eth2: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 122, node addr d4:85:64:5c:ca:e4
eth3: (PCI Express:2.5GB/s:Width x4) 00:1b:78:2a:86:8f
eth3: Intel(R) PRO/1000 Network Connection
eth3: MAC: 0, PHY: 1, PBA No: d95140-009
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 169
cciss0: <0x323a> at PCI 0000:0c:00.0 IRQ 146 using DAC
 cciss/c0d0: p1 p2
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /class/input/input0
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input1
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 7 ports detected
usb 5-2.2: new full speed USB device using uhci_hcd and address 4
usb 5-2.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
floppy0: no floppy controllers found
work still pending
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
work still pending
  Vendor: HP        Model: Virtual DVD-ROM   Rev:  0.0
  Type:   CD-ROM                             ANSI SCSI revision: 00
usb-storage: device scan complete
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sr0: scsi3-mmc drive: 12x/12x cd/rw tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
libata version 3.00 loaded.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
work still pending
loop: loaded (max 8 devices)
dca service started, version 1.8
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Fusion MPT base driver 3.04.15rh
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.15rh
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT FC Host driver 3.04.15rh
Fusion MPT SAS Host driver 3.04.15rh
Fusion MPT SPI Host driver 3.04.15rh
I2O subsystem v1.325
i2o: max drivers = 8
I2O Block Device OSM v1.325
block-osm: registered device at major 80
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139too Fast Ethernet driver 0.9.27
Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k3-1-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2-1
Copyright (c) 2007-2009 Intel Corporation.
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
Generic PHY: Registered new driver
3ware 9000 Storage Controller device driver for Linux v2.26.08.007-2.6.18RH.
3ware Storage Controller device driver for Linux v1.26.03.000-2.6.18RH.
Adaptec aacraid driver 1.1-5[24702]
Loading iSCSI transport class v2.0-871.
iscsi: registered transport (be2iscsi)
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
alua: device handler registered
emc: device handler registered
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
iscsi: registered transport (tcp)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.31-RH1 Tues. June. 15 14:13:02 EST 2010
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
QLogic Fibre Channel HBA Driver
st: Version 20070203, fixed bufsize 32768, s/g segs 256
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
FS-Cache: Loaded
fuse init (API version 7.10)
scsi1 : cciss
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
work still pending
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
cnic: Added CNIC device: eth1
cnic: Added CNIC device: eth2
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
iscsi: registered transport (bnx2i)
scsi2 : Broadcom Offload iSCSI Initiator
scsi3 : Broadcom Offload iSCSI Initiator
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
imm: Version 2.05 (for Linux 2.4.0)
ppa: Version 2.07 (for Linux 2.4.x)
iscsi: registered transport (iser)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
raid5: automatically using best checksumming function: generic_sse
   generic_sse:  5988.000 MB/sec
raid5: using function: generic_sse (5988.000 MB/sec)
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
device-mapper: multipath hp-sw: version 1.0.0 loaded
raid6: int64x1   1601 MB/s
raid6: int64x2   1820 MB/s
raid6: int64x4   1496 MB/s
raid6: int64x8   1390 MB/s
raid6: sse2x1    3875 MB/s
raid6: sse2x2    4527 MB/s
raid6: sse2x4    5148 MB/s
raid6: using algorithm sse2x4 (5148 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid0 personality registered for level 0
device-mapper: multipath rdac: rdac: version 0.4 loaded
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: linear personality registered for level -1
md: multipath personality registered for level -4
input: PC Speaker as /class/input/input2
EDAC MC: Ver: 2.0.1 Jan  4 2011
EDAC i7core: Driver loaded.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 74
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
10:15 -------------
10:15 /proc/mdstat:
10:15 -------------
Personalities : [raid6] [raid5] [raid4] [raid0] [raid1] [raid10] [linear] [multipath] 
unused devices: <none>
10:15 -------------
10:15 /proc/swaps:
10:15 -------------
10:15 -------------
10:15 /proc/filesystems:
10:15 -------------
nodev   sysfs
nodev   rootfs
nodev   bdev
nodev   proc
nodev   cpuset
nodev   binfmt_misc
nodev   debugfs
nodev   securityfs
nodev   sockfs
nodev   usbfs
nodev   pipefs
nodev   anon_inodefs
nodev   futexfs
nodev   tmpfs
nodev   inotifyfs
nodev   eventpollfs
nodev   devpts
    ext2
nodev   ramfs
nodev   hugetlbfs
    iso9660
nodev   mqueue
nodev   fuse
    fuseblk
nodev   fusectl
nodev   rpc_pipefs
nodev   nfs
nodev   nfs4
    vfat
    ext4
    ext4dev
    msdos
nodev   nfsd
    xfs
    ext3
nodev   configfs
10:15 -------------
10:15 /proc/partitions:
10:15 -------------
major minor  #blocks  name

 104     0  292935982 cciss/c0d0
 104     1     104391 cciss/c0d0p1
 104     2  292824787 cciss/c0d0p2
 252     0    2097152 dm-0
 252     1    3145728 dm-1
 252     2     262144 dm-2
 252     3    3145728 dm-3
 252     4   52428800 dm-4
 252     5   16777216 dm-5
10:15 -------------
10:15 fdisk result:
10:15 -------------

Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1   *           1          13      104391   83  Linux
/dev/cciss/c0d0p2              14       36468   292824787+  8e  Linux LVM
10:15 -------------
10:15 /tmp/mondo-restore.cfg result:
10:15 -------------
media-size 0
files-in-filelist 46972
last-filelist-number 80
internal-tape-block-size 32768
use-lzo no
use-gzip yes
use-star yes
use-lzma no
use-comp yes
datestamp Tue Sep  3 19:31:24 BST 2013
total-slices 1
iso-dev /dev/mapper/rootvg-opt
iso-mnt /opt
iso-prefix mondo3.0.4-bkup
isodir /backups
bootloader.device /dev/cciss/c0d0
bootloader.name GRUB
bootloader.ver grub (GNU GRUB 0.97)
backup-media-type cdr
differential 0
10:15 WARNING: Unable to find udevadm. Not triggering udev
10:15 backup-media-type is specified in config file - great.
10:15 Calling post-init
10:15 Executing preliminary script 
Here is my /tmp/mountlist.txt
/dev/cciss/c0d0p2 lvm lvm 292824787 
/dev/rootvg/root / ext3 lvm 
/dev/rootvg/var /var ext3 lvm 
/dev/rootvg/home /home ext3 lvm 
/dev/rootvg/usr /usr ext3 lvm 
/dev/rootvg/opt /opt ext3 lvm 
/dev/cciss/c0d0p1 /boot ext3 104391 /boot
/dev/rootvg/swap swap swap lvm 
10:15 mondorestore found; cool...
10:15 mount-me found
10:15 unmount-me found
10:15 mondorestore found
10:15 -------------------NUKE MODE-------------------
[TH=14047] libmondo-tools.c->reset_bkpinfo#835: Hi
root is mounted at /dev/root

No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
[TH=14047] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1
    [TH=14047] libmondo-tools.c->setup_tmpdir#754: Purging old tmpdir /mondo.tmp.*
    [TH=14047] libmondo-tools.c->setup_scratchdir#798: Purging old scratchdir /mondo.scratch.*
running: mkdir -p /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
root is mounted at /dev/root

No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
[TH=14047] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1
running: mount / -o remount,rw > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.618000
[Main] mondorestore.c->main#2890: FYI - g_mountlist_fname = /tmp/mountlist.txt
running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: rm -Rf /tmp/tmpfs/mondo.tmp.* > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
-------------- Mondo Restore v3.0.4-r3177 -------------
DON'T PANIC! Mondorestore logs almost everything, so please 
don't break out in a cold sweat just because you see a few  
error messages in the log. Read them; analyze them; see if  
they are significant; above all, verify your backups! Please
attach a compressed copy of this log to any e-mail you send 
to the Mondo mailing list when you are seeking technical    
support. Without it, we can't help you.            - DevTeam
------------------------------------------------------------
BTW, despite (or perhaps because of) the wealth of messages,
some users are inclined to stop reading this log.  If Mondo 
stopped for some reason, chances are it's detailed here.    
More than likely there's a message at the very end of this  
log that will tell you what is wrong.  Please read it!      
------------------------------------------------------------
[Main] mondorestore.c->main#2925: I am in disaster recovery mode
    [Main] mondorestore.c->main#2930: what time is it
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found afio at /usr/bin/afio
running: which mkfs.vfat > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
/sbin/mkfs.vfat
--------------------------------end of output------------------------------
...ran just fine. :-)
        [Main] libmondo-cli.c->handle_incoming_parameters#96: Switches:-
        [Main] libmondo-cli.c->handle_incoming_parameters#100: -Z nuke
[Main] mondorestore.c->main#3105: I must be in disaster recovery mode.
    [Main] mondorestore.c->main#3106: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt 
    [Main] mondorestore.c->main#3108: About to call load_mountlist and load_raidtab
    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#721: Entering read_cfg_file_into_bkpinfo
    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#832: Backup medium is similar to CD-R[W]
[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#842: Goody! ... bkpinfo->use_star is now true.
[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#871: Internal tape block size has been custom-set to 32768
    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#910: differential var = '0'
    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#914: This is a regular (full) backup
    [Main] libmondo-mountlist.c->load_mountlist#829: Loading mountlist...
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/cciss/c0d0p2
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p2 lvm lvm 292824787 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/root
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/root / ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/var
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/var /var ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/home
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/home /home ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/usr
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/usr /usr ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/opt
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/opt /opt ext3 0 
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p1 /boot ext3 104391 /boot
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/swap
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/swap swap swap 0 
    [Main] libmondo-mountlist.c->load_mountlist#912: Mountlist loaded successfully.
    [Main] libmondo-mountlist.c->load_mountlist#913: 8 entries in mountlist
    [Main] libmondo-files.c->length_of_file#550: filename=/etc/raidtab
Unable to openin filename (No such file or directory)
    [Main] libmondo-raid.c->load_raidtab_into_raidlist#611: Raidtab is very small or non-existent. Ignoring it.
    [Main] mondorestore.c->main#3113: Returned from calling load_mountlist and load_raidtab successfully
[Main] mondorestore.c->main#3158: Send in the clowns.
    [Main] mondorestore.c->main#3162: nuking
    [Main] mondorestore.c->nuke_mode#769: nuke_mode --- starting
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2230: gcffa --- starting
I'm thinking...
running: mkdir -p /tmp/mondo.tmp.6aKJNj/mount.bootdisk > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2248: mountpt = /tmp/mondo.tmp.6aKJNj/mount.bootdisk; cfg_file=/tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2251: gcffa --- we don't have cfg file yet.
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2255: gcffa --- calling mount_media now :)
running: mount | grep -F /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
    [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom
running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2258: gcffa --- managed to mount CD; so, no need for Plan B
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2315: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz
running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
./tmp/mondo-restore.cfg
./tmp/biggielist.txt
./tmp/i-want-my-lvm
./tmp/filelist.full.gz
./tmp/mountlist.txt
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2331: gcffa --- great! We've got the config file
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2336: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg
[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2343: ... and I moved it successfully to /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg
    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2348: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mountlist.txt /tmp/mondo.tmp.6aKJNj/tmp/mountlist.txt
running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
Recovered mondo-restore.cfg
running: cp -f /tmp/mondo.tmp.6aKJNj/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: cp -f etc/raidtab /etc/ > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
cp: can't stat 'etc/raidtab': No such file or directory
--------------------------------end of output------------------------------
...ran with res=256
    [Main] libmondo-mountlist.c->load_mountlist#829: Loading mountlist...
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/cciss/c0d0p2
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p2 lvm lvm 292824787 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/root
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/root / ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/var
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/var /var ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/home
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/home /home ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/usr
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/usr /usr ext3 0 
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/opt
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/opt /opt ext3 0 
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/cciss/c0d0p1 /boot ext3 104391 /boot
            [Main] libmondo-mountlist.c->load_mountlist#840: no label found for /dev/rootvg/swap
    [Main] libmondo-mountlist.c->load_mountlist#900: /dev/rootvg/swap swap swap 0 
    [Main] libmondo-mountlist.c->load_mountlist#912: Mountlist loaded successfully.
    [Main] libmondo-mountlist.c->load_mountlist#913: 8 entries in mountlist
    [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist
    [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
    [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM
[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 286070 --> 286070
Expanding entries to suit drive /dev/cciss/c0d0 (286070 MB)
[Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/cciss/c0d0
Disk /dev/cciss/c0d0 was 286063 MB; is now 286070 MB; Proportionally resizing partitions (factor ~= 1.00002)
Changing /dev/cciss/c0d0p2 from 292824787 KB to 292831296 KB
Changing /dev/cciss/c0d0p1 from 104391 KB to 104393 KB
Last partition size calculated would be over-allocated, reducing /dev/cciss/c0d0p1 from 104393 KB to 104384 KB.
final_size = 286070 MB
Mountlist adjusted to suit current hard drive(s)
    [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
    [Main] libmondo-mountlist.c->evaluate_mountlist#566: Evaluating mountlist...
[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 286070 --> 286070
    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#413: /dev/cciss/c0d0 is 286070 MB
    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/cciss/c0d0p1 on /dev/cciss/c0d0 #6 in mountlist
Found MBR partition table format type
    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/cciss/c0d0p2 on /dev/cciss/c0d0 #0 in mountlist
Found MBR partition table format type
    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#525: Fine, no error in evaluate_drive_within_mountlist
    [Main] libmondo-mountlist.c->save_mountlist_to_disk#937: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt
Restoring Automatically
    [Main] mondo-prep.c->partition_everything#1985: partition_everything() --- starting
Partitioning hard drives        
Stopping all LVMs, just in case
    [Main] mondo-prep.c->do_my_funky_lvm_stuff#239: STARTING
[Main] mondo-prep.c->do_my_funky_lvm_stuff#240: OK, opened i-want-my-lvm. Shutting down LVM volumes...
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found lvm at /sbin/lvm
Shutting down lv /dev/rootvg/var
Shutting down lv /dev/rootvg/usr
Shutting down lv /dev/rootvg/swap
Shutting down lv /dev/rootvg/root
Shutting down lv /dev/rootvg/opt
Shutting down lv /dev/rootvg/home
Shutting down vg rootvg
[Main] mondo-prep.c->do_my_funky_lvm_stuff#268: Closed i-want-my-lvm. Finished erasing LVMs.
    [Main] mondo-prep.c->do_my_funky_lvm_stuff#417: ENDING
[Main] mondo-prep.c->do_my_funky_lvm_stuff#422: Not many errors. Returning 0.
Stopping all software RAID devices, just in case
Done.
    [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
    [Main] mondo-prep.c->partition_drive#1533: Partitioning drive /dev/cciss/c0d0
    [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/cciss/c0d0p1 in mountlist
    [Main] mondo-prep.c->partition_drive#1621: Wiping /dev/cciss/c0d0's partition table
    [Main] mondo-prep.c->partition_drive#1643: New, kernel-friendly partition remover
    [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/cciss/c0d0', 1, 0, 'ext3', 104384) --- starting
    [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/cciss/c0d0p1 (101 MB)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null'
Found MBR partition table format type
[Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing
[Main] mondo-prep.c->partition_device#1870: output = 'n
p
1

+104384K
'
[Main] mondo-prep.c->partition_device#1875: Successfully created partition 1 on /dev/cciss/c0d0
[Main] mondo-prep.c->partition_device#1881: Trying to set partition 1 type now on /dev/cciss/c0d0
[Main] mondo-prep.c->set_partition_type#2140: Setting /dev/cciss/c0d0p1's type to ext3 (83)
    [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving
    [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/cciss/c0d0p2 in mountlist
    [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/cciss/c0d0', 2, 1, 'lvm', 292831296) --- starting
    [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/cciss/c0d0p2 (285968 MB)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p2 mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null'
Found MBR partition table format type
[Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing
[Main] mondo-prep.c->partition_device#1870: output = 'n
p
2

+292831296K
'
[Main] mondo-prep.c->partition_device#1875: Successfully created partition 2 on /dev/cciss/c0d0
[Main] mondo-prep.c->partition_device#1881: Trying to set partition 2 type now on /dev/cciss/c0d0
[Main] mondo-prep.c->set_partition_type#2140: Setting /dev/cciss/c0d0p2's type to lvm (8e)
    [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving
------------------- fdisk.log looks like this ------------------

The number of cylinders for this disk is set to 36468.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type

Command (m for help): Partition number (1-4): Warning: partition 3 has empty type

Command (m for help): Partition number (1-4): 
Command (m for help): Selected partition 1

Command (m for help): 1: unknown command
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-36468, default 1): 
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-36468, default 36468): +104384K

Command (m for help): 
Command (m for help): 
Command (m for help): p

Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1               1          14      112423+  83  Linux

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (15-36468, default 15): 
Using default value 15
Last cylinder or +size or +sizeM or +sizeK (15-36468, default 36468): +292831296K
Value out of range.
Last cylinder or +size or +sizeM or +sizeK (15-36468, default 36468): 
Using default value 36468

Command (m for help): 
Command (m for help): p

Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1               1          14      112423+  83  Linux
/dev/cciss/c0d0p2              15       36468   292816755   83  Linux

Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 8e
Changed system type of partition 2 to 8e (Linux LVM)

Command (m for help): 
Command (m for help): p

Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1               1          14      112423+  83  Linux
/dev/cciss/c0d0p2              15       36468   292816755   8e  Linux LVM

Command (m for help): p

Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1               1          14      112423+  83  Linux
/dev/cciss/c0d0p2              15       36468   292816755   8e  Linux LVM

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

The number of cylinders for this disk is set to 36468.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Partition number (1-4): Value out of range.
Partition number (1-4): Partition number (1-4): 
Command (m for help): 
Disk /dev/cciss/c0d0: 299.9 GB, 299966445568 bytes
255 heads, 63 sectors/track, 36468 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

           Device Boot      Start         End      Blocks   Id  System
/dev/cciss/c0d0p1   *           1          14      112423+  83  Linux
/dev/cciss/c0d0p2              15       36468   292816755   8e  Linux LVM

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
------------------- end of fdisk.log...       ------------------
Done.
Preparing to format your disk(s)
Please wait. This may take a few minutes.
    [Main] mondo-prep.c->format_everything#965: format_everything (mountlist, interactively = false
Formatting partitions      
[Main] mondo-prep.c->format_everything#977: Stopping all RAID devices
[Main] mondo-prep.c->format_everything#983: Prepare soft-RAIDs
    [Main] mondo-prep.c->format_everything#986: Examining /dev/cciss/c0d0p2
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/root
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/var
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/home
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/usr
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/opt
    [Main] mondo-prep.c->format_everything#986: Examining /dev/cciss/c0d0p1
    [Main] mondo-prep.c->format_everything#986: Examining /dev/rootvg/swap
[Main] mondo-prep.c->format_everything#1013: Creating LVMs
    [Main] mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2444: wait_until_software_raids_are_prepped
Configuring LVM
    [Main] mondo-prep.c->do_my_funky_lvm_stuff#239: STARTING
[Main] mondo-prep.c->do_my_funky_lvm_stuff#240: OK, opened i-want-my-lvm. Shutting down LVM volumes...
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found lvm at /sbin/lvm
[Main] mondo-prep.c->do_my_funky_lvm_stuff#273: OK, rewound i-want-my-lvm. Doing funky stuff...
lvm vgchange -an --> 0
echo y | lvm pvcreate -ff /dev/cciss/c0d0p2 --> 0
lvm vgscan --> 0
[Main] mondo-prep.c->do_my_funky_lvm_stuff#305: Deleting old entries at /dev/rootvg
running: rm -Rf /dev/rootvg > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: lvm vgscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Reading all physical volumes.  This may take a while...
File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14520: sh
File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh
File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh
File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh
File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14520: sh
File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14520: sh
No volume groups found
--------------------------------end of output------------------------------
...ran just fine. :-)
running: lvm pvscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
PV /dev/cciss/c0d0p2                      lvm2 [279.25 GB]
Total: 1 [279.25 GB] / in use: 0 [0   ] / in no VG: 1 [279.25 GB]
File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14524: sh
File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh
File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh
File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh
File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14524: sh
File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14524: sh
--------------------------------end of output------------------------------
...ran just fine. :-)
        [Main] mondo-prep.c->do_my_funky_lvm_stuff#314: After working around potentially broken i-want-my-lvm, incoming[] is now '# lvm vgcreate rootvg -l 0 -p 0 -s 32.00m /dev/cciss/c0d0p2  '
lvm vgcreate rootvg -l 0 -p 0 -s 32.00m /dev/cciss/c0d0p2   --> 0
In case you're interested...
running: lvm vgscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Reading all physical volumes.  This may take a while...
Found volume group "rootvg" using metadata type lvm2
File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14530: sh
File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh
File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh
File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh
File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14530: sh
File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14530: sh
--------------------------------end of output------------------------------
...ran just fine. :-)
running: lvm pvscan > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
PV /dev/cciss/c0d0p2   VG rootvg   lvm2 [279.25 GB / 279.25 GB free]
Total: 1 [279.25 GB] / in use: 1 [279.25 GB] / in no VG: 0 [0   ]
File descriptor 3 (/tmp/prep.sh) leaked on lvm invocation. Parent PID 14534: sh
File descriptor 4 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh
File descriptor 5 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh
File descriptor 6 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh
File descriptor 7 (/proc/mdstat) leaked on lvm invocation. Parent PID 14534: sh
File descriptor 8 (/tmp/i-want-my-lvm) leaked on lvm invocation. Parent PID 14534: sh
--------------------------------end of output------------------------------
...ran just fine. :-)
lvm vgchange -a y rootvg --> 0
lvm lvcreate -L 256.00m -r auto -n home rootvg --> 0
lvm lvcreate -L 51200m -r auto -n opt rootvg --> 0
lvm lvcreate -L 2048m -r auto -n root rootvg --> 0
lvm lvcreate -L 16384m -r auto -n swap rootvg --> 0
lvm lvcreate -L 3072m -r auto -n usr rootvg --> 0
lvm lvcreate -L 3072m -r auto -n var rootvg --> 0
lvm vgscan --> 0
[Main] mondo-prep.c->do_my_funky_lvm_stuff#400: Closed i-want-my-lvm. Finished doing funky stuff.
    [Main] mondo-prep.c->do_my_funky_lvm_stuff#417: ENDING
[Main] mondo-prep.c->do_my_funky_lvm_stuff#422: Not many errors. Returning 0.
LVM initialized OK
[Main] mondo-prep.c->format_everything#1052: Formatting regulars
    [Main] mondo-prep.c->format_everything#1065: Not formatting /dev/cciss/c0d0p2 - it's an LVM
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/root " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/root' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/var " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/var' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/home " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/home' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/usr " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/usr' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/opt " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/rootvg/opt' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d0p1' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null'
running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/rootvg/swap' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Setting up swapspace version 1, size = 17179865 kB
--------------------------------end of output------------------------------
...ran just fine. :-)
...OK
Done.
    [Main] mondo-prep.c->format_everything#1116: format_everything () - finished successfully
Mounting devices         
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/root " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/root   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/root -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/rootvg/root -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/cciss/c0d0p1   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/boot > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/cciss/c0d0p1 -o rw,user_xattr,acl /mnt/RESTORING/boot 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/cciss/c0d0p1 -o rw,user_xattr,acl /mnt/RESTORING/boot 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/home " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/home   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/home > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/home -o rw,user_xattr,acl /mnt/RESTORING/home 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/rootvg/home -o rw,user_xattr,acl /mnt/RESTORING/home 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/opt " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/opt   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/opt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/opt -o rw,user_xattr,acl /mnt/RESTORING/opt 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/rootvg/opt -o rw,user_xattr,acl /mnt/RESTORING/opt 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/usr " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/usr   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/usr > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/usr -o rw,user_xattr,acl /mnt/RESTORING/usr 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/rootvg/usr -o rw,user_xattr,acl /mnt/RESTORING/usr 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/var " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/var   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/var > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t ext3 /dev/rootvg/var -o rw,user_xattr,acl /mnt/RESTORING/var 2>> /var/log/mondorestore.log'
running: mount -t ext3 /dev/rootvg/var -o rw,user_xattr,acl /mnt/RESTORING/var 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p2 mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null'
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null'
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /dev/rootvg/swap   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: swapon /dev/rootvg/swap > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
All partitions were mounted OK.
Done.
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /proc   
running: mkdir -p /mnt/RESTORING/proc > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t proc /proc  /mnt/RESTORING/proc 2>> /var/log/mondorestore.log'
running: mount -t proc /proc  /mnt/RESTORING/proc 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] mondo-rstr-tools.c->mount_device#478: Mounting device /sys   
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found setfacl at /usr/bin/setfacl
running: mkdir -p /mnt/RESTORING/sys > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->mount_device#507: command='mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log'
running: mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: df -m > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Filesystem           1M-blocks      Used Available Use Mounted on
rootfs                     150        64        86  43 /
/dev/root                  150        64        86  43 /
none                         5         1         5   5 /dev
none                     24148         0     24148   0 /dev/shm
/dev/shm                   256         1       256   1 /tmp
/dev/rootvg/root          2016        68      1847   4 /mnt/RESTORING
/dev/cciss/c0d0p1          107         6        96   6 /mnt/RESTORING/boot
/dev/rootvg/home           248        11       226   5 /mnt/RESTORING/home
/dev/rootvg/opt          50397       180     47657   1 /mnt/RESTORING/opt
/dev/rootvg/usr           3024        69      2802   3 /mnt/RESTORING/usr
/dev/rootvg/var           3024        69      2802   3 /mnt/RESTORING/var
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondorestore.c->nuke_mode#868: Restoring everything
    [Main] mondorestore.c->restore_everything#2697: restore_everything() --- starting
running: mkdir -p /mnt/RESTORING > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] mondorestore.c->restore_everything#2704: Changing dir to /mnt/RESTORING
[Main] mondorestore.c->restore_everything#2711: path is now /mnt/RESTORING
[Main] mondorestore.c->restore_everything#2712: restoring everything
            [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find petris
Preparing to read your archives
running: mount | grep -F /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
    [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom
running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK
Restoring OS and data from CD/USB   
Restoring from archives
    [Main] mondorestore.c->restore_all_tarballs_from_CD#2241: Insisting on 1st media, so that I can have a look at LAST-FILELIST-NUMBER
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
Restoring from CDR #1
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
No tarballs. Strange. Maybe you only backed up freakin' big files?
Reassembling large files      
[Main] mondorestore.c->restore_all_biggiefiles_from_CD#2102: OK, no biggielist; not restoring biggiefiles
    [Main] libmondo-files.c->length_of_file#550: filename=/etc/raidtab
Unable to openin filename (No such file or directory)
running: ps  | grep " petris " | grep -v "grep" | awk '{print $1;}' > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: kill `ps  | grep " petris " | grep -v "grep" | awk '{print $1;}'` > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
--------------------------------end of output------------------------------
...ran with res=256
    [Main] mondorestore.c->restore_everything#2754: restore_everything() --- leaving
running: tar cf - /dev | ( cd /mnt/RESTORING ; tar xf - ) > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->run_boot_loader#1388: run_boot_loader: device='/dev/cciss/c0d0', name='GRUB'
Non-interactive mode: no way to give you the keyboard so that you re-generate your initrd. Hope it's OK
[Main] mondo-rstr-tools.c->offer_to_make_initrd#1343: Non-interactive mode: no way to give you the keyboard so that you re-generate your initrd. Hope it's OK
            [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find pico
            [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find nano
            [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find e3em
            [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find e3vi
            [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found vi at /bin/vi
running: which grub-MR > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
/mondo/grub-MR
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] mondo-rstr-tools.c->run_grub#1503: Yay! grub-MR found...
[Main] mondo-rstr-tools.c->run_grub#1505: command = grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt
Running GRUB...                                                 
    [Main] mondo-rstr-tools.c->run_grub#1584: grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt
Now I'll use grub-install
Launching: chroot /mnt/RESTORING grub-install /dev/cciss/c0d0
chroot: can't execute 'grub-install': No such file or directory
grub-install returned 127
Now I'll use grub2-install
chroot: can't execute 'grub2-install': No such file or directory
grub2-install returned 127
Trying a hack
Checking usr/lib/grub/*
Cannot find BOOTPATHNAME
.............Cool.
    device (hd0) /dev/cciss/c0d
    
    root (hd0,-1)
    setup (hd0)
    quit 
chroot: can't execute 'grub': No such file or directory
Hack returned res=0
running: grub-MR /dev/cciss/c0d0 /tmp/mountlist.txt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Checking usr/lib/grub/*
Cannot find BOOTPATHNAME
.............Cool.
--------------------------------end of output------------------------------
...ran just fine. :-)
Done.
Your boot loader ran OK
[Main] mondorestore.c->nuke_mode#873: Great! Boot loader was installed. No need for msg at end.
running: touch /mnt/RESTORING/var/log/pacct > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
touch: /mnt/RESTORING/var/log/pacct: No such file or directory
--------------------------------end of output------------------------------
...ran with res=256
running: touch /mnt/RESTORING/var/account/pacct > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
touch: /mnt/RESTORING/var/account/pacct: No such file or directory
--------------------------------end of output------------------------------
...ran with res=256
running: ls /mnt/RESTORING /tmp > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
/mnt/RESTORING:
boot
dev
home
lost+found
opt
proc
sys
usr
var

/tmp:
CDROM-LIVES-HERE
FILES-IN-FILELIST
KEYMAP-LIVES-HERE
LAST-FILELIST-NUMBER
USE-UDEV
USING-COMP
USING-GZIP
USING-STAR
biggielist.txt
feed.txt
filelist.full.gz
fstab
groovy-stuff
grub.output
i-want-my-lvm
isodir
mondo-restore.cfg
mondo-restore.log
mondo.scratch.GesK46
mondo.tmp.6aKJNj
mondorestore.log
mount.log
mountlist.changed
mountlist.original
mountlist.txt
mountlist.txt.orig
myssh
null
oid.log
oid1.log
out.sh
prep.sh
start-lvm
stderr
stdin
stdout
tmpfs
--------------------------------end of output------------------------------
...ran just fine. :-)
running: mkdir -p /mnt/RESTORING/var/run/console > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: chmod 777 /mnt/RESTORING/dev/null > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: cd /mnt/RESTORING; for i in `ls home/`; do echo "Moving $i's spurious files to $i/.disabled"; mkdir "$i"/.disabled ; mv -f "$i"/.DCOP* "$i"/.MCOP* "$i"/.*authority "$i"/.kde/tmp* "$i"/.kde/socket* "$i"/.disabled/ ; done > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Moving lost+found's spurious files to lost+found/.disabled
mv: can't rename 'lost+found/.DCOP*': No such file or directory
mv: can't rename 'lost+found/.MCOP*': No such file or directory
mv: can't rename 'lost+found/.*authority': No such file or directory
mv: can't rename 'lost+found/.kde/tmp*': No such file or directory
mv: can't rename 'lost+found/.kde/socket*': No such file or directory
--------------------------------end of output------------------------------
...ran with res=256
running: rm -f /mnt/RESTORING/var/run/*.pid > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: rm -f /mnt/RESTORING/var/lock/subsys/* > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: df -m > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Filesystem           1M-blocks      Used Available Use Mounted on
rootfs                     150        64        86  43 /
/dev/root                  150        64        86  43 /
none                         5         1         5   5 /dev
none                     24148         0     24148   0 /dev/shm
/dev/shm                   256         1       256   1 /tmp
/dev/rootvg/root          2016        68      1846   4 /mnt/RESTORING
/dev/cciss/c0d0p1          107         6        96   6 /mnt/RESTORING/boot
/dev/rootvg/home           248        11       226   5 /mnt/RESTORING/home
/dev/rootvg/opt          50397       180     47657   1 /mnt/RESTORING/opt
/dev/rootvg/usr           3024        69      2802   3 /mnt/RESTORING/usr
/dev/rootvg/var           3024        69      2802   3 /mnt/RESTORING/var
/dev/cdrom                 372       372         0 100 /mnt/cdrom
--------------------------------end of output------------------------------
...ran just fine. :-)
Unmounting devices      
running: ps | grep buffer | grep -v "grep buffer" > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
running: cp -f /var/log/mondorestore.log /mnt/RESTORING/var/log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: umount /mnt/RESTORING/proc > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: umount /mnt/RESTORING/sys > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/swap mounted?
            [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/rootvg/swap " > /dev/null 2> /dev/null'
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/swap  ...not mounted anyway :-) OK
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/var mounted?
running: umount /mnt/RESTORING/var > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/var  
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/usr mounted?
running: umount /mnt/RESTORING/usr > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/usr  
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/opt mounted?
running: umount /mnt/RESTORING/opt > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/opt  
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/home mounted?
running: umount /mnt/RESTORING/home > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/home  
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cciss/c0d0p1 mounted?
running: umount /mnt/RESTORING/boot > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/cciss/c0d0p1  
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/rootvg/root mounted?
running: mkdir -p /mnt/RESTORING/var/lock > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: mkdir -p /mnt/RESTORING/var/run > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: umount /mnt/RESTORING/ > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
    [Main] mondo-rstr-tools.c->unmount_all_devices#2114: Unmounting device /dev/rootvg/root  
Done.
All partitions were unmounted OK.
Using tune2fs/tune4fs to identify your ext2,3,4 partitions
10:16 Identifying your drives with FS tune tool
10:16 Nothing to do on /dev/rootvg/root        /                       ext3    defaults        1 1
10:16 Nothing to do on /dev/rootvg/var         /var                    ext3    defaults        1 2
10:16 Nothing to do on /dev/rootvg/home        /home                   ext3    defaults        1 2
10:16 Nothing to do on /dev/rootvg/usr         /usr                    ext3    defaults        1 2
10:16 Nothing to do on /dev/rootvg/opt         /opt                    ext3    defaults        1 2
10:16 Running tune2fs -L /boot /dev/cciss/c0d0p1
10:16 Nothing to do on tmpfs                   /dev/shm                tmpfs   defaults        0 0
10:16 Nothing to do on devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
10:16 Nothing to do on sysfs                   /sys                    sysfs   defaults        0 0
10:16 Nothing to do on proc                    /proc                   proc    defaults        0 0
10:16 Nothing to do on /dev/rootvg/swap        swap                    swap    defaults        0 0
10:16 Labeling complete.
running: label-partitions-as-necessary /tmp/mountlist.txt < /tmp/fstab >> /var/log/mondorestore.log 2>> /var/log/mondorestore.log > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
tune2fs 1.39 (29-May-2006)
--------------------------------end of output------------------------------
...ran just fine. :-)
Done.
Mondo has restored your system.

Please wait for the command prompt. Then remove the backup media and reboot.

Please visit our website at http://www.mondorescue.org for more information.
Mondo has restored your system. Please wait for the command prompt.
Then remove the backup media and reboot.
Please visit our website at http://www.mondorescue.org for more information.
running: sync > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
        [Main] libmondo-devices.c->eject_device#255: Ejecting /dev/cdrom
running: eject /dev/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran with res=256
Run complete. Please remove media and reboot.
[Main] mondorestore.c->main#3235: No post-nuke found.
Restore log (/var/log/mondorestore.log) copied to /var/log on your hard disk
Mondo-restore is exiting (retval=0)                                      
root is mounted at /dev/root

No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
[Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#167: Is this a ramdisk? result = 1
running: mount / -o remount,rw > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
--------------------------------end of output------------------------------
...ran just fine. :-)
running: umount -d /mnt/cdrom > /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.6aKJNj/mondo-run-prog-thing.err
--------------------------------start of output-----------------------------
Command failed (Invalid argument)
--------------------------------end of output------------------------------
...ran with res=256
[Main] ../common/newt-specific.c->finish#445: Calling newtFinished()
10:22 Launching Shell