Ticket #628: BS1-mondorestore1.log

File BS1-mondorestore1.log, 180.2 KB (added by bs27975, 12 years ago)

T628-BS mondo restore log - attempt 1 (failed)

Line 
101:33 Preparing udev environment...
201:33 udev started manually
301:33 Discovering with udevadm
401:33 Extracted additional /dev entries OK.
501:33 Redirecting serial to /dev/tty
601:34 Trying 'mount /dev/shm -t tmpfs -o size=128m'
701:34 Great. Pivot succeeded w/ size=128m
801:34 Successfully mounted dynamic /tmp ramdisk
901:34 find-and-mount-cdrom --- starting
1001:34 Trying /dev/hda
1101:34 It's not in /dev/hda; I'll keep looking
1201:34 Trying /dev/hdb
1301:34 It's not in /dev/hdb; I'll keep looking
1401:34 Trying /dev/hdc
1501:34 It's not in /dev/hdc; I'll keep looking
1601:34 Trying /dev/hdd
1701:34 It's not in /dev/hdd; I'll keep looking
1801:34 Trying /dev/hde
1901:34 It's not in /dev/hde; I'll keep looking
2001:34 Trying /dev/hdf
2101:34 It's not in /dev/hdf; I'll keep looking
2201:34 Trying /dev/hdg
2301:34 It's not in /dev/hdg; I'll keep looking
2401:34 Trying /dev/hdh
2501:34 It's not in /dev/hdh; I'll keep looking
2601:34 Trying /dev/scd0
2701:34 /dev/scd0 has a CD-ROM in it
2801:34 CD-ROM found at /dev/scd0
2901:34 /dev/scd0 is where the Mondo CD lives.
3001:34 CD-ROM found and mounted at /dev/scd0
3101:34 find-and-mount-cdrom --- leaving (0)
3201:34 OK, I am running on a CD-ROM. Good.
3301:34 Installing additional tools ...
3401:34 Starting install-additional-tools
3501:34 PLEASE WAIT. Untarring data content
3601:34 Populating / with tar file content...
3701:34 Installing and removing BOOTLOADER.DEVICE
38BOOTLOADER.MBR
39BOOTLOADER.NAME
40BOOTLOADER.VER
41FILES-IN-FILELIST
42LAST-FILELIST-NUMBER
43bin
44dev
45etc
46lib
47lib32
48lib64
49mondo
50run
51sbin
52tmp
53usr
54var
5501:34 Done.
5601:34 Exiting install-additional-tools
5701:34 klogd and syslogd have been started.
5801:34 Using /etc/console-setup/cached.kmap.gz keyboard map.
5901:34 RAID controller(s) detected. Pausing 10 seconds to let them warm up.
6001:34 Running 'mdadm'
6101:34 Scanning LVM's...
6201:34 LVM's have been started.
6301:35 Can't find /mnt/cdrom/archives; darn.
6401:35 init (from mindi v2.1.3-r3026)
6501:35 /proc/cmdline is:
6601:35 ----------
67initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=139264 expert devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz
6801:35 ----------
6901:35 df result:
7001:35 ----------
71Filesystem 1K-blocks Used Available Use% Mounted on
72none 5120 44 5076 1% /dev
73none 3945912 0 3945912 0% /dev/shm
74/dev/shm 131072 3456 127616 3% /tmp
75/dev/scd0 115976 115976 0 100% /mnt/cdrom
7601:35 -------------
7701:35 mount result:
7801:35 -------------
79rootfs on / type rootfs (rw,relatime)
80/proc on /proc type proc (rw,relatime)
81/sys on /sys type sysfs (rw,relatime)
82none on /dev type tmpfs (rw,relatime,size=5120k,mode=755)
83none on /dev/pts type devpts (rw,relatime,mode=620,ptmxmode=000)
84none on /dev/shm type tmpfs (rw,relatime)
85/dev/shm on /tmp type tmpfs (rw,relatime,size=131072k)
86/dev/scd0 on /mnt/cdrom type iso9660 (ro,relatime)
8701:35 -------------
8801:35 lsmod result:
8901:35 -------------
90Module Size Used by
91paride 15006 0
92asix 26919 0
93usbnet 26212 1 asix
94imm 17713 0
95ppa 17676 0
96uas 18180 0
97parport_pc 32866 0
98lirc_dev 19204 0
99tveeprom 21249 0
100tda8290 22616 0
101tda9887 14154 0
102ppdev 17113 0
103lp 17799 0
104parport 46562 6 paride,imm,ppa,parport_pc,ppdev,lp
105drm_kms_helper 46978 0
106drm 242038 1 drm_kms_helper
107wmi 19256 0
108mac_hid 13253 0
109mei 41616 0
110dm_zero 12529 0
111linear 12894 0
112dm_mirror 22203 0
113dm_region_hash 20918 1 dm_mirror
114raid10 35496 0
115dm_log 18564 2 dm_mirror,dm_region_hash
116raid456 58338 0
117dm_snapshot 39031 0
118raid0 17229 0
119multipath 13145 0
120raid1 35572 0
121dm_round_robin 12747 0
122dm_multipath 23230 1 dm_round_robin
123video 19596 0
124shpchp 37277 0
125msdos 17332 0
126ext2 73795 0
127xfs 836544 0
128ocfs2_dlm 240162 0
129ocfs2_nodemanager 226549 1 ocfs2_dlm
130configfs 35126 2 ocfs2_nodemanager
131btrfs 652957 0
132cifs 287317 0
133binfmt_misc 17540 0
134reiserfs 244805 0
135minix 36288 0
136nfsd 277809 0
137jfs 186647 0
138zlib_deflate 27139 1 btrfs
139rfcomm 47604 0
140bnep 18281 0
141bluetooth 180104 4 rfcomm,bnep
142ip6table_filter 12815 0
143ip6_tables 27864 1 ip6table_filter
144ipt_REJECT 12576 0
145iptable_filter 12810 0
146ipt_LOG 12919 0
147nf_conntrack_ipv4 19716 0
148nf_defrag_ipv4 12729 1 nf_conntrack_ipv4
149ip_tables 27473 1 iptable_filter
150ebtable_nat 12807 0
151ebtables 30984 1 ebtable_nat
152xt_state 12578 0
153nfnetlink_queue 17882 0
154nfnetlink 14327 1 nfnetlink_queue
155xt_iprange 12541 0
156xt_tcpudp 12603 0
157nf_conntrack 81926 2 nf_conntrack_ipv4,xt_state
158xt_NFQUEUE 12726 0
159xt_mark 12563 0
160x_tables 29846 12 ip6table_filter,ip6_tables,ipt_REJECT,iptable_filter,ipt_LOG,ip_tables,ebtables,xt_state,xt_iprange,xt_tcpudp,xt_NFQUEUE,xt_mark
161snd 78855 0
162soundcore 15091 1 snd
163kvm 415549 0
164async_raid6_recov 12776 1 raid456
165async_memcpy 12529 1 raid456
166async_pq 13187 1 raid456
167raid6_pq 88346 2 async_raid6_recov,async_pq
168async_xor 12879 2 raid456,async_pq
169async_tx 13349 5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor
170xor 12894 1 async_xor
171md4 12595 0
172pata_amd 14118 0
173pata_atiixp 13204 0
174pata_jmicron 12747 0
175pata_marvell 12912 0
176pata_serverworks 13426 0
177pata_sil680 13243 0
178pata_via 13701 0
179sata_nv 32286 0
180sata_promise 18398 0
181sata_svw 13094 0
182sata_via 13799 0
183cciss 111158 0
184usbkbd 12943 0
185ff_memless 13097 0
186mptctl 38982 0
187mptfc 22715 0
188mptsas 63612 0
189mptspi 22921 0
190mptscsih 44882 3 mptfc,mptsas,mptspi
191mptbase 103162 5 mptctl,mptfc,mptsas,mptspi,mptscsih
192i2o_block 17468 0
193i2o_core 50513 1 i2o_block
1943c59x 46569 0
195ne2k_pci 13691 0
1968390 18856 1 ne2k_pci
197pcnet32 42119 0
198bnx2 86853 0
199bnx2x 517762 0
200tg3 152032 0
201be2net 78296 0
202e100 37213 0
203e1000 108471 0
204e1000e 156693 0
205igb 125798 0
206dca 15232 1 igb
207forcedeth 63460 0
2088139cp 27409 0
2098139too 32177 0
210r8169 62099 0
211mdio 13770 1 bnx2x
212vmxnet3 45883 0
213pcmcia 49310 0
214pcmcia_core 22614 1 pcmcia
2153w_9xxx 43472 0
2163w_xxxx 39171 0
217BusLogic 31350 0
218a100u2w 17904 0
219aacraid 92064 0
220advansys 66720 0
221aic79xx 159815 0
222aic7xxx 136176 0
223arcmsr 37554 0
224atp870u 34406 0
225dc395x 41121 0
226dmx3191d 17394 0
227gdth 91011 0
228hpsa 55996 0
229initio 27068 0
230iscsi_tcp 18587 0
231libiscsi_tcp 25115 1 iscsi_tcp
232libiscsi 57546 2 iscsi_tcp,libiscsi_tcp
233megaraid 48607 0
234megaraid_mbox 36828 0
235megaraid_mm 18273 1 megaraid_mbox
236megaraid_sas 83020 0
237osst 62034 0
238qla1280 27273 0
239qla2xxx 404541 0
240qlogicfas408 14698 0
241scsi_transport_fc 54395 2 mptfc,qla2xxx
242scsi_tgt 20166 1 scsi_transport_fc
243scsi_transport_iscsi 53735 2 iscsi_tcp,libiscsi
244scsi_transport_sas 40558 1 mptsas
245st 45134 0
246tmscsim 27296 0
247cp210x 21898 0
248usbserial 47077 1 cp210x
249ums_cypress 12707 0
250usb_storage 49198 1 ums_cypress
251virtio_balloon 13108 0
252vfat 17585 0
253fat 61512 2 msdos,vfat
254isofs 40257 1
255nfs 356315 0
256lockd 86161 2 nfsd,nfs
257fscache 61529 1 nfs
258nfs_acl 12883 2 nfsd,nfs
259nls_cp437 16991 0
260nls_iso8859_1 12713 0
261nls_utf8 12557 1
262libcrc32c 12644 2 btrfs,bnx2x
263auth_rpcgss 53380 2 nfsd,nfs
264sunrpc 245464 5 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
265usbhid 47199 0
266hid 99559 1 usbhid
26701:35 -------------
26801:35 dmesg result:
26901:35 -------------
270[ 0.000000] Initializing cgroup subsys cpuset
271[ 0.000000] Initializing cgroup subsys cpu
272[ 0.000000] Linux version 3.2.0-26-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 (Ubuntu 3.2.0-26.41-generic 3.2.19)
273[ 0.000000] Command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=139264 expert devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz
274[ 0.000000] KERNEL supported cpus:
275[ 0.000000] Intel GenuineIntel
276[ 0.000000] AMD AuthenticAMD
277[ 0.000000] Centaur CentaurHauls
278[ 0.000000] BIOS-provided physical RAM map:
279[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
280[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
281[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
282[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
283[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
284[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
285[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
286[ 0.000000] BIOS-e820: 0000000040200000 - 00000000ae8ff000 (usable)
287[ 0.000000] BIOS-e820: 00000000ae8ff000 - 00000000ae94e000 (ACPI NVS)
288[ 0.000000] BIOS-e820: 00000000ae94e000 - 00000000ae957000 (ACPI data)
289[ 0.000000] BIOS-e820: 00000000ae957000 - 00000000aedf2000 (reserved)
290[ 0.000000] BIOS-e820: 00000000aedf2000 - 00000000aedf3000 (usable)
291[ 0.000000] BIOS-e820: 00000000aedf3000 - 00000000aee03000 (reserved)
292[ 0.000000] BIOS-e820: 00000000aee03000 - 00000000aee10000 (ACPI NVS)
293[ 0.000000] BIOS-e820: 00000000aee10000 - 00000000aee38000 (reserved)
294[ 0.000000] BIOS-e820: 00000000aee38000 - 00000000aee7b000 (ACPI NVS)
295[ 0.000000] BIOS-e820: 00000000aee7b000 - 00000000af000000 (usable)
296[ 0.000000] BIOS-e820: 00000000af800000 - 00000000bfa00000 (reserved)
297[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
298[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
299[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
300[ 0.000000] NX (Execute Disable) protection: active
301[ 0.000000] DMI 2.7 present.
302[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Extreme4, BIOS P1.20 04/27/2011
303[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
304[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
305[ 0.000000] No AGP bridge found
306[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
307[ 0.000000] MTRR default type: uncachable
308[ 0.000000] MTRR fixed ranges enabled:
309[ 0.000000] 00000-9FFFF write-back
310[ 0.000000] A0000-BFFFF uncachable
311[ 0.000000] C0000-CFFFF write-protect
312[ 0.000000] D0000-E7FFF uncachable
313[ 0.000000] E8000-FFFFF write-protect
314[ 0.000000] MTRR variable ranges enabled:
315[ 0.000000] 0 base 000000000 mask E00000000 write-back
316[ 0.000000] 1 base 200000000 mask FC0000000 write-back
317[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
318[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
319[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
320[ 0.000000] 5 base 23FE00000 mask FFFE00000 uncachable
321[ 0.000000] 6 disabled
322[ 0.000000] 7 disabled
323[ 0.000000] 8 disabled
324[ 0.000000] 9 disabled
325[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
326[ 0.000000] original variable MTRRs
327[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
328[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
329[ 0.000000] reg 2, base: 2808MB, range: 8MB, type UC
330[ 0.000000] reg 3, base: 2816MB, range: 256MB, type UC
331[ 0.000000] reg 4, base: 3GB, range: 1GB, type UC
332[ 0.000000] reg 5, base: 9214MB, range: 2MB, type UC
333[ 0.000000] total RAM covered: 7926M
334[ 0.000000] Found optimal setting for mtrr clean up
335[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
336[ 0.000000] New variable MTRRs
337[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
338[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
339[ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB
340[ 0.000000] reg 3, base: 2808MB, range: 8MB, type UC
341[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
342[ 0.000000] reg 5, base: 8GB, range: 1GB, type WB
343[ 0.000000] reg 6, base: 9214MB, range: 2MB, type UC
344[ 0.000000] e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
345[ 0.000000] last_pfn = 0xaf000 max_arch_pfn = 0x400000000
346[ 0.000000] found SMP MP-table at [ffff8800000fd1f0] fd1f0
347[ 0.000000] initial memory mapped : 0 - 20000000
348[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
349[ 0.000000] init_memory_mapping: 0000000000000000-00000000af000000
350[ 0.000000] 0000000000 - 00af000000 page 2M
351[ 0.000000] kernel direct mapping tables up to af000000 @ 1fffc000-20000000
352[ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
353[ 0.000000] 0100000000 - 023fe00000 page 2M
354[ 0.000000] kernel direct mapping tables up to 23fe00000 @ aeff6000-af000000
355[ 0.000000] RAMDISK: 1da86000 - 1ffdf000
356[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
357[ 0.000000] ACPI: XSDT 00000000ae94e068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
358[ 0.000000] ACPI: FACP 00000000ae956150 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
359[ 0.000000] ACPI: DSDT 00000000ae94e150 07FFB (v02 ALASKA A M I 00000000 INTL 20051117)
360[ 0.000000] ACPI: FACS 00000000aee07f80 00040
361[ 0.000000] ACPI: APIC 00000000ae956248 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
362[ 0.000000] ACPI: SSDT 00000000ae9562e0 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
363[ 0.000000] ACPI: MCFG 00000000ae9564b8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
364[ 0.000000] ACPI: AAFT 00000000ae9564f8 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
365[ 0.000000] ACPI: HPET 00000000ae9565d0 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
366[ 0.000000] ACPI: Local APIC address 0xfee00000
367[ 0.000000] No NUMA configuration found
368[ 0.000000] Faking a node at 0000000000000000-000000023fe00000
369[ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
370[ 0.000000] NODE_DATA [000000023fdfb000 - 000000023fdfffff]
371[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237800000-ffff88023f3fffff] on node 0
372[ 0.000000] Zone PFN ranges:
373[ 0.000000] DMA 0x00000010 -> 0x00001000
374[ 0.000000] DMA32 0x00001000 -> 0x00100000
375[ 0.000000] Normal 0x00100000 -> 0x0023fe00
376[ 0.000000] Movable zone start PFN for each node
377[ 0.000000] early_node_map[7] active PFN ranges
378[ 0.000000] 0: 0x00000010 -> 0x0000009d
379[ 0.000000] 0: 0x00000100 -> 0x00020000
380[ 0.000000] 0: 0x00020200 -> 0x00040000
381[ 0.000000] 0: 0x00040200 -> 0x000ae8ff
382[ 0.000000] 0: 0x000aedf2 -> 0x000aedf3
383[ 0.000000] 0: 0x000aee7b -> 0x000af000
384[ 0.000000] 0: 0x00100000 -> 0x0023fe00
385[ 0.000000] On node 0 totalpages: 2024466
386[ 0.000000] DMA zone: 64 pages used for memmap
387[ 0.000000] DMA zone: 5 pages reserved
388[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
389[ 0.000000] DMA32 zone: 16320 pages used for memmap
390[ 0.000000] DMA32 zone: 693957 pages, LIFO batch:31
391[ 0.000000] Normal zone: 20472 pages used for memmap
392[ 0.000000] Normal zone: 1289736 pages, LIFO batch:31
393[ 0.000000] ACPI: PM-Timer IO Port: 0x408
394[ 0.000000] ACPI: Local APIC address 0xfee00000
395[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
396[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
397[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
398[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
399[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
400[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
401[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
402[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
403[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
404[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
405[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
406[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
407[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
408[ 0.000000] ACPI: IRQ0 used by override.
409[ 0.000000] ACPI: IRQ2 used by override.
410[ 0.000000] ACPI: IRQ9 used by override.
411[ 0.000000] Using ACPI (MADT) for SMP configuration information
412[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
413[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
414[ 0.000000] nr_irqs_gsi: 40
415[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
416[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
417[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
418[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
419[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
420[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
421[ 0.000000] PM: Registered nosave memory: 00000000ae8ff000 - 00000000ae94e000
422[ 0.000000] PM: Registered nosave memory: 00000000ae94e000 - 00000000ae957000
423[ 0.000000] PM: Registered nosave memory: 00000000ae957000 - 00000000aedf2000
424[ 0.000000] PM: Registered nosave memory: 00000000aedf3000 - 00000000aee03000
425[ 0.000000] PM: Registered nosave memory: 00000000aee03000 - 00000000aee10000
426[ 0.000000] PM: Registered nosave memory: 00000000aee10000 - 00000000aee38000
427[ 0.000000] PM: Registered nosave memory: 00000000aee38000 - 00000000aee7b000
428[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000af800000
429[ 0.000000] PM: Registered nosave memory: 00000000af800000 - 00000000bfa00000
430[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
431[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
432[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
433[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
434[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
435[ 0.000000] Booting paravirtualized kernel on bare hardware
436[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
437[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s83072 r8192 d23424 u262144
438[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
439[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
440[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1987605
441[ 0.000000] Policy zone: Normal
442[ 0.000000] Kernel command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=139264 expert devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz
443[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
444[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
445[ 0.000000] Checking aperture...
446[ 0.000000] No AGP bridge found
447[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
448[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
449[ 0.000000] Memory: 7849848k/9435136k available (6555k kernel code, 1337272k absent, 248016k reserved, 6645k data, 920k init)
450[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
451[ 0.000000] Hierarchical RCU implementation.
452[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
453[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
454[ 0.000000] Extended CMOS year: 2000
455[ 0.000000] Console: colour VGA+ 80x25
456[ 0.000000] console [tty0] enabled
457[ 0.000000] allocated 65011712 bytes of page_cgroup
458[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
459[ 0.000000] hpet clockevent registered
460[ 0.000000] Fast TSC calibration using PIT
461[ 0.004000] Detected 3392.317 MHz processor.
462[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.63 BogoMIPS (lpj=13569268)
463[ 0.000079] pid_max: default: 32768 minimum: 301
464[ 0.000126] Security Framework initialized
465[ 0.000169] AppArmor: AppArmor initialized
466[ 0.000206] Yama: becoming mindful.
467[ 0.000606] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
468[ 0.001632] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
469[ 0.002057] Mount-cache hash table entries: 256
470[ 0.002148] Initializing cgroup subsys cpuacct
471[ 0.002187] Initializing cgroup subsys memory
472[ 0.002227] Initializing cgroup subsys devices
473[ 0.002265] Initializing cgroup subsys freezer
474[ 0.002302] Initializing cgroup subsys blkio
475[ 0.002341] Initializing cgroup subsys perf_event
476[ 0.002391] CPU: Physical Processor ID: 0
477[ 0.002428] CPU: Processor Core ID: 0
478[ 0.002466] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
479[ 0.002466] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
480[ 0.002545] mce: CPU supports 9 MCE banks
481[ 0.002589] CPU0: Thermal monitoring enabled (TM1)
482[ 0.002627] using mwait in idle threads.
483[ 0.003925] ACPI: Core revision 20110623
484[ 0.013240] ftrace: allocating 26991 entries in 106 pages
485[ 0.018638] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
486[ 0.058246] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
487[ 0.164472] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
488[ 0.164587] PEBS disabled due to CPU errata.
489[ 0.165043] ... version: 3
490[ 0.165080] ... bit width: 48
491[ 0.165116] ... generic registers: 4
492[ 0.165151] ... value mask: 0000ffffffffffff
493[ 0.165189] ... max period: 000000007fffffff
494[ 0.165227] ... fixed-purpose events: 3
495[ 0.165263] ... event mask: 000000070000000f
496[ 0.165378] NMI watchdog enabled, takes one hw-pmu counter.
497[ 0.165452] Booting Node 0, Processors #1
498[ 0.165501] smpboot cpu 1: start_ip = 98000
499[ 0.276193] NMI watchdog enabled, takes one hw-pmu counter.
500[ 0.276278] #2
501[ 0.276302] smpboot cpu 2: start_ip = 98000
502[ 0.383922] NMI watchdog enabled, takes one hw-pmu counter.
503[ 0.384004] #3
504[ 0.384028] smpboot cpu 3: start_ip = 98000
505[ 0.491648] NMI watchdog enabled, takes one hw-pmu counter.
506[ 0.491730] #4
507[ 0.491754] smpboot cpu 4: start_ip = 98000
508[ 0.599324] NMI watchdog enabled, takes one hw-pmu counter.
509[ 0.599411] #5
510[ 0.599435] smpboot cpu 5: start_ip = 98000
511[ 0.706958] NMI watchdog enabled, takes one hw-pmu counter.
512[ 0.707042] #6
513[ 0.707066] smpboot cpu 6: start_ip = 98000
514[ 0.814686] NMI watchdog enabled, takes one hw-pmu counter.
515[ 0.814769] #7 Ok.
516[ 0.814802] smpboot cpu 7: start_ip = 98000
517[ 0.922393] NMI watchdog enabled, takes one hw-pmu counter.
518[ 0.922449] Brought up 8 CPUs
519[ 0.922483] Total of 8 processors activated (54274.42 BogoMIPS).
520[ 0.927557] devtmpfs: initialized
521[ 0.927976] EVM: security.selinux
522[ 0.928012] EVM: security.SMACK64
523[ 0.928047] EVM: security.capability
524[ 0.928093] PM: Registering ACPI NVS region at ae8ff000 (323584 bytes)
525[ 0.928136] PM: Registering ACPI NVS region at aee03000 (53248 bytes)
526[ 0.928176] PM: Registering ACPI NVS region at aee38000 (274432 bytes)
527[ 0.928562] print_constraints: dummy:
528[ 0.928622] RTC time: 1:33:40, date: 07/11/12
529[ 0.928673] NET: Registered protocol family 16
530[ 0.928757] Trying to unpack rootfs image as initramfs...
531[ 0.928758] ACPI: bus type pci registered
532[ 0.928787] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
533[ 0.928788] PCI: not using MMCONFIG
534[ 0.928789] PCI: Using configuration type 1 for base access
535[ 0.929197] bio: create slab <bio-0> at 0
536[ 0.929266] ACPI: Added _OSI(Module Device)
537[ 0.929303] ACPI: Added _OSI(Processor Device)
538[ 0.929340] ACPI: Added _OSI(3.0 _SCP Extensions)
539[ 0.929378] ACPI: Added _OSI(Processor Aggregator Device)
540[ 0.929935] ACPI: EC: Look up EC in DSDT
541[ 0.930471] ACPI: Executed 1 blocks of module-level executable AML code
542[ 0.932060] ACPI: SSDT 00000000aee0f898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
543[ 0.932321] ACPI: Dynamic OEM Table Load:
544[ 0.932401] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
545[ 0.932511] ACPI: SSDT 00000000aee06d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
546[ 0.932730] ACPI: Dynamic OEM Table Load:
547[ 0.932809] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
548[ 0.933245] ACPI: Interpreter enabled
549[ 0.933282] ACPI: (supports S0 S1 S3 S4 S5)
550[ 0.933431] ACPI: Using IOAPIC for interrupt routing
551[ 0.933478] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
552[ 0.933554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
553[ 0.963002] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
554[ 0.965110] ACPI: No dock devices found.
555[ 0.965148] HEST: Table not found.
556[ 0.965184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
557[ 0.965334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
558[ 0.965468] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
559[ 0.965509] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
560[ 0.965549] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
561[ 0.965589] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
562[ 0.965629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
563[ 0.965680] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
564[ 0.965731] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
565[ 0.965787] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
566[ 0.965809] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300
567[ 0.965815] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
568[ 0.965818] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
569[ 0.965821] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
570[ 0.965870] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
571[ 0.965899] pci 0000:00:16.0: reg 10: [mem 0xfbf08000-0xfbf0800f 64bit]
572[ 0.965997] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
573[ 0.966002] pci 0000:00:16.0: PME# disabled
574[ 0.966041] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
575[ 0.966067] pci 0000:00:1a.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
576[ 0.966192] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
577[ 0.966196] pci 0000:00:1a.0: PME# disabled
578[ 0.966225] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
579[ 0.966244] pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
580[ 0.966338] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
581[ 0.966342] pci 0000:00:1b.0: PME# disabled
582[ 0.966369] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
583[ 0.966499] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
584[ 0.966504] pci 0000:00:1c.0: PME# disabled
585[ 0.966539] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
586[ 0.966645] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
587[ 0.966649] pci 0000:00:1c.4: PME# disabled
588[ 0.966677] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
589[ 0.966784] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
590[ 0.966787] pci 0000:00:1c.5: PME# disabled
591[ 0.966815] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
592[ 0.966923] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
593[ 0.966926] pci 0000:00:1c.6: PME# disabled
594[ 0.966955] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
595[ 0.967061] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
596[ 0.967064] pci 0000:00:1c.7: PME# disabled
597[ 0.967097] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
598[ 0.967123] pci 0000:00:1d.0: reg 10: [mem 0xfbf06000-0xfbf063ff]
599[ 0.967244] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
600[ 0.967248] pci 0000:00:1d.0: PME# disabled
601[ 0.967275] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
602[ 0.967435] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
603[ 0.967460] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
604[ 0.967470] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
605[ 0.967479] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
606[ 0.967489] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
607[ 0.967499] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
608[ 0.967510] pci 0000:00:1f.2: reg 24: [mem 0xfbf05000-0xfbf057ff]
609[ 0.967575] pci 0000:00:1f.2: PME# supported from D3hot
610[ 0.967579] pci 0000:00:1f.2: PME# disabled
611[ 0.967599] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
612[ 0.967616] pci 0000:00:1f.3: reg 10: [mem 0xfbf04000-0xfbf040ff 64bit]
613[ 0.967645] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
614[ 0.967749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
615[ 0.967881] pci 0000:02:00.0: [1b4b:9120] type 0 class 0x000106
616[ 0.967902] pci 0000:02:00.0: reg 10: [io 0xe040-0xe047]
617[ 0.967916] pci 0000:02:00.0: reg 14: [io 0xe030-0xe033]
618[ 0.967931] pci 0000:02:00.0: reg 18: [io 0xe020-0xe027]
619[ 0.967945] pci 0000:02:00.0: reg 1c: [io 0xe010-0xe013]
620[ 0.967960] pci 0000:02:00.0: reg 20: [io 0xe000-0xe00f]
621[ 0.967974] pci 0000:02:00.0: reg 24: [mem 0xfbe10000-0xfbe107ff]
622[ 0.967989] pci 0000:02:00.0: reg 30: [mem 0xfbe00000-0xfbe0ffff pref]
623[ 0.968060] pci 0000:02:00.0: PME# supported from D3hot
624[ 0.968065] pci 0000:02:00.0: PME# disabled
625[ 0.974130] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
626[ 0.974172] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
627[ 0.974176] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
628[ 0.974263] pci 0000:03:00.0: [1b6f:7023] type 0 class 0x000c03
629[ 0.974294] pci 0000:03:00.0: reg 10: [mem 0xfbd00000-0xfbd07fff 64bit]
630[ 0.974446] pci 0000:03:00.0: supports D1 D2
631[ 0.974447] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
632[ 0.974452] pci 0000:03:00.0: PME# disabled
633[ 0.982109] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
634[ 0.982154] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
635[ 0.982244] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
636[ 0.982275] pci 0000:04:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit]
637[ 0.982427] pci 0000:04:00.0: supports D1 D2
638[ 0.982428] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
639[ 0.982433] pci 0000:04:00.0: PME# disabled
640[ 0.990085] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
641[ 0.990130] pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
642[ 0.990218] pci 0000:05:00.0: [10b5:8608] type 1 class 0x000604
643[ 0.990239] pci 0000:05:00.0: reg 10: [mem 0xfbb00000-0xfbb1ffff]
644[ 0.990369] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
645[ 0.990374] pci 0000:05:00.0: PME# disabled
646[ 0.998060] pci 0000:00:1c.7: PCI bridge to [bus 05-0e]
647[ 0.998102] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
648[ 0.998106] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbbfffff]
649[ 0.998113] pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
650[ 0.998227] pci 0000:06:01.0: [10b5:8608] type 1 class 0x000604
651[ 0.998379] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
652[ 0.998384] pci 0000:06:01.0: PME# disabled
653[ 0.998442] pci 0000:06:04.0: [10b5:8608] type 1 class 0x000604
654[ 0.998594] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
655[ 0.998598] pci 0000:06:04.0: PME# disabled
656[ 0.998654] pci 0000:06:05.0: [10b5:8608] type 1 class 0x000604
657[ 0.998805] pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
658[ 0.998809] pci 0000:06:05.0: PME# disabled
659[ 0.998868] pci 0000:06:06.0: [10b5:8608] type 1 class 0x000604
660[ 0.999019] pci 0000:06:06.0: PME# supported from D0 D3hot D3cold
661[ 0.999024] pci 0000:06:06.0: PME# disabled
662[ 0.999084] pci 0000:06:07.0: [10b5:8608] type 1 class 0x000604
663[ 0.999234] pci 0000:06:07.0: PME# supported from D0 D3hot D3cold
664[ 0.999239] pci 0000:06:07.0: PME# disabled
665[ 0.999301] pci 0000:06:08.0: [10b5:8608] type 1 class 0x000604
666[ 0.999452] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
667[ 0.999457] pci 0000:06:08.0: PME# disabled
668[ 0.999519] pci 0000:06:09.0: [10b5:8608] type 1 class 0x000604
669[ 0.999672] pci 0000:06:09.0: PME# supported from D0 D3hot D3cold
670[ 0.999677] pci 0000:06:09.0: PME# disabled
671[ 0.999762] pci 0000:05:00.0: PCI bridge to [bus 06-0e]
672[ 0.999808] pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
673[ 0.999812] pci 0000:05:00.0: bridge window [mem 0xfb800000-0xfbafffff]
674[ 0.999821] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
675[ 0.999908] pci 0000:06:01.0: PCI bridge to [bus 07-07]
676[ 1.000094] pci 0000:08:00.0: [1b21:1080] type 1 class 0x000604
677[ 1.000335] pci 0000:08:00.0: supports D1 D2
678[ 1.000336] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
679[ 1.000343] pci 0000:08:00.0: PME# disabled
680[ 1.006039] pci 0000:06:04.0: PCI bridge to [bus 08-09]
681[ 1.006086] pci 0000:06:04.0: bridge window [io 0xd000-0xdfff]
682[ 1.006091] pci 0000:06:04.0: bridge window [mem 0xfba00000-0xfbafffff]
683[ 1.006272] pci 0000:09:00.0: [1186:4b01] type 0 class 0x000200
684[ 1.006327] pci 0000:09:00.0: reg 10: [mem 0xfba20000-0xfba23fff]
685[ 1.006353] pci 0000:09:00.0: reg 14: [io 0xd000-0xd0ff]
686[ 1.006477] pci 0000:09:00.0: reg 30: [mem 0xfba00000-0xfba1ffff pref]
687[ 1.006584] pci 0000:09:00.0: supports D1 D2
688[ 1.006585] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
689[ 1.006593] pci 0000:09:00.0: PME# disabled
690[ 1.006721] pci 0000:08:00.0: PCI bridge to [bus 09-09]
691[ 1.006773] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
692[ 1.006781] pci 0000:08:00.0: bridge window [mem 0xfba00000-0xfbafffff]
693[ 1.006934] pci 0000:0a:00.0: [1106:3403] type 0 class 0x000c00
694[ 1.006976] pci 0000:0a:00.0: reg 10: [mem 0xfb900000-0xfb9007ff 64bit]
695[ 1.006996] pci 0000:0a:00.0: reg 18: [io 0xc000-0xc0ff]
696[ 1.007178] pci 0000:0a:00.0: supports D2
697[ 1.007179] pci 0000:0a:00.0: PME# supported from D2 D3hot D3cold
698[ 1.007186] pci 0000:0a:00.0: PME# disabled
699[ 1.014022] pci 0000:06:05.0: PCI bridge to [bus 0a-0a]
700[ 1.014069] pci 0000:06:05.0: bridge window [io 0xc000-0xcfff]
701[ 1.014074] pci 0000:06:05.0: bridge window [mem 0xfb900000-0xfb9fffff]
702[ 1.014217] pci 0000:0b:00.0: [14e4:16b1] type 0 class 0x000200
703[ 1.014263] pci 0000:0b:00.0: reg 10: [mem 0xd0010000-0xd001ffff 64bit pref]
704[ 1.014300] pci 0000:0b:00.0: reg 18: [mem 0xd0000000-0xd000ffff 64bit pref]
705[ 1.014367] pci 0000:0b:00.0: reg 30: [mem 0xfb800000-0xfb8007ff pref]
706[ 1.014499] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
707[ 1.014507] pci 0000:0b:00.0: PME# disabled
708[ 1.021999] pci 0000:06:06.0: PCI bridge to [bus 0b-0b]
709[ 1.022051] pci 0000:06:06.0: bridge window [mem 0xfb800000-0xfb8fffff]
710[ 1.022060] pci 0000:06:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
711[ 1.022150] pci 0000:06:07.0: PCI bridge to [bus 0c-0c]
712[ 1.022296] pci 0000:06:08.0: PCI bridge to [bus 0d-0d]
713[ 1.022443] pci 0000:06:09.0: PCI bridge to [bus 0e-0e]
714[ 1.022606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
715[ 1.022661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
716[ 1.022675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
717[ 1.022686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
718[ 1.022697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
719[ 1.022707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
720[ 1.022718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21._PRT]
721[ 1.022757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR31._PRT]
722[ 1.022769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34._PRT]
723[ 1.022782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34.BR22._PRT]
724[ 1.022798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR35._PRT]
725[ 1.022810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR36._PRT]
726[ 1.022822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR37._PRT]
727[ 1.022833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR38._PRT]
728[ 1.022845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR39._PRT]
729[ 1.022896] pci0000:00: Requesting ACPI _OSC control (0x1d)
730[ 1.023017] pci0000:00: ACPI _OSC control (0x1c) granted
731[ 1.024945] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
732[ 1.025259] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
733[ 1.025572] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
734[ 1.025864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
735[ 1.026160] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
736[ 1.026501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
737[ 1.026841] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
738[ 1.027153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
739[ 1.027495] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
740[ 1.027551] vgaarb: loaded
741[ 1.027585] vgaarb: bridge control possible 0000:00:02.0
742[ 1.027662] i2c-core: driver [aat2870] using legacy suspend method
743[ 1.027702] i2c-core: driver [aat2870] using legacy resume method
744[ 1.027766] SCSI subsystem initialized
745[ 1.027825] libata version 3.00 loaded.
746[ 1.027843] usbcore: registered new interface driver usbfs
747[ 1.027885] usbcore: registered new interface driver hub
748[ 1.027931] usbcore: registered new device driver usb
749[ 1.028001] PCI: Using ACPI for IRQ routing
750[ 1.037620] PCI: pci_cache_line_size set to 64 bytes
751[ 1.037749] reserve RAM buffer: 000000000009d800 - 000000000009ffff
752[ 1.037750] reserve RAM buffer: 00000000ae8ff000 - 00000000afffffff
753[ 1.037752] reserve RAM buffer: 00000000aedf3000 - 00000000afffffff
754[ 1.037753] reserve RAM buffer: 00000000af000000 - 00000000afffffff
755[ 1.037754] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
756[ 1.037800] NetLabel: Initializing
757[ 1.037836] NetLabel: domain hash size = 128
758[ 1.037872] NetLabel: protocols = UNLABELED CIPSOv4
759[ 1.037914] NetLabel: unlabeled traffic allowed by default
760[ 1.037978] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
761[ 1.038209] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
762[ 1.040253] Switching to clocksource hpet
763[ 1.043061] AppArmor: AppArmor Filesystem Enabled
764[ 1.043110] pnp: PnP ACPI init
765[ 1.043152] ACPI: bus type pnp registered
766[ 1.043257] pnp 00:00: [bus 00-ff]
767[ 1.043258] pnp 00:00: [io 0x0cf8-0x0cff]
768[ 1.043259] pnp 00:00: [io 0x0000-0x03af window]
769[ 1.043260] pnp 00:00: [io 0x03e0-0x0cf7 window]
770[ 1.043260] pnp 00:00: [io 0x03b0-0x03df window]
771[ 1.043261] pnp 00:00: [io 0x0d00-0xffff window]
772[ 1.043262] pnp 00:00: [mem 0x000a0000-0x000bffff window]
773[ 1.043263] pnp 00:00: [mem 0x000c0000-0x000dffff window]
774[ 1.043264] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
775[ 1.043265] pnp 00:00: [mem 0x00000000 window]
776[ 1.043296] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
777[ 1.043320] pnp 00:01: [mem 0xfed10000-0xfed19fff]
778[ 1.043320] pnp 00:01: [mem 0xe0000000-0xefffffff]
779[ 1.043321] pnp 00:01: [mem 0xfed90000-0xfed93fff]
780[ 1.043322] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
781[ 1.043323] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
782[ 1.043346] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
783[ 1.043386] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
784[ 1.043427] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
785[ 1.043468] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
786[ 1.043508] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
787[ 1.043549] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
788[ 1.043572] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
789[ 1.043573] pnp 00:02: [io 0x0290-0x029f]
790[ 1.043573] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
791[ 1.043591] system 00:02: [io 0x0290-0x029f] has been reserved
792[ 1.043631] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
793[ 1.043773] pnp 00:03: [dma 4]
794[ 1.043774] pnp 00:03: [io 0x0000-0x000f]
795[ 1.043775] pnp 00:03: [io 0x0081-0x0083]
796[ 1.043775] pnp 00:03: [io 0x0087]
797[ 1.043776] pnp 00:03: [io 0x0089-0x008b]
798[ 1.043777] pnp 00:03: [io 0x008f]
799[ 1.043777] pnp 00:03: [io 0x00c0-0x00df]
800[ 1.043788] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
801[ 1.043792] pnp 00:04: [io 0x0070-0x0071]
802[ 1.043797] pnp 00:04: [irq 8]
803[ 1.043806] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
804[ 1.043809] pnp 00:05: [io 0x0061]
805[ 1.043818] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
806[ 1.043827] pnp 00:06: [io 0x0010-0x001f]
807[ 1.043828] pnp 00:06: [io 0x0022-0x003f]
808[ 1.043829] pnp 00:06: [io 0x0044-0x005f]
809[ 1.043829] pnp 00:06: [io 0x0062-0x0063]
810[ 1.043830] pnp 00:06: [io 0x0065-0x006f]
811[ 1.043831] pnp 00:06: [io 0x0072-0x007f]
812[ 1.043831] pnp 00:06: [io 0x0080]
813[ 1.043832] pnp 00:06: [io 0x0084-0x0086]
814[ 1.043833] pnp 00:06: [io 0x0088]
815[ 1.043834] pnp 00:06: [io 0x008c-0x008e]
816[ 1.043835] pnp 00:06: [io 0x0090-0x009f]
817[ 1.043836] pnp 00:06: [io 0x00a2-0x00bf]
818[ 1.043836] pnp 00:06: [io 0x00e0-0x00ef]
819[ 1.043837] pnp 00:06: [io 0x04d0-0x04d1]
820[ 1.043856] system 00:06: [io 0x04d0-0x04d1] has been reserved
821[ 1.043897] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
822[ 1.043900] pnp 00:07: [io 0x00f0-0x00ff]
823[ 1.043904] pnp 00:07: [irq 13]
824[ 1.043912] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
825[ 1.044033] pnp 00:08: [io 0x03f8-0x03ff]
826[ 1.044036] pnp 00:08: [irq 4]
827[ 1.044037] pnp 00:08: [dma 0 disabled]
828[ 1.044062] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
829[ 1.044130] pnp 00:09: [io 0x0400-0x0453]
830[ 1.044131] pnp 00:09: [io 0x0458-0x047f]
831[ 1.044131] pnp 00:09: [io 0x1180-0x119f]
832[ 1.044132] pnp 00:09: [io 0x0500-0x057f]
833[ 1.044133] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
834[ 1.044134] pnp 00:09: [mem 0xfec00000-0xfecfffff]
835[ 1.044134] pnp 00:09: [mem 0xfed08000-0xfed08fff]
836[ 1.044135] pnp 00:09: [mem 0xff000000-0xffffffff]
837[ 1.044154] system 00:09: [io 0x0400-0x0453] has been reserved
838[ 1.044193] system 00:09: [io 0x0458-0x047f] has been reserved
839[ 1.044233] system 00:09: [io 0x1180-0x119f] has been reserved
840[ 1.044272] system 00:09: [io 0x0500-0x057f] has been reserved
841[ 1.044312] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
842[ 1.044365] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
843[ 1.044406] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
844[ 1.044447] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
845[ 1.044488] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
846[ 1.044502] pnp 00:0a: [io 0x0454-0x0457]
847[ 1.044519] system 00:0a: [io 0x0454-0x0457] has been reserved
848[ 1.044560] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
849[ 1.044608] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
850[ 1.044624] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
851[ 1.044692] pnp: PnP ACPI: found 12 devices
852[ 1.044728] ACPI: ACPI bus type pnp unregistered
853[ 1.050366] PCI: max bus depth: 4 pci_try_num: 5
854[ 1.050532] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
855[ 1.050586] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
856[ 1.050625] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
857[ 1.050669] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
858[ 1.050718] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
859[ 1.050761] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
860[ 1.050810] pci 0000:00:1c.6: PCI bridge to [bus 04-04]
861[ 1.050852] pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
862[ 1.050901] pci 0000:06:01.0: PCI bridge to [bus 07-07]
863[ 1.050957] pci 0000:08:00.0: PCI bridge to [bus 09-09]
864[ 1.050997] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
865[ 1.051046] pci 0000:08:00.0: bridge window [mem 0xfba00000-0xfbafffff]
866[ 1.051106] pci 0000:06:04.0: PCI bridge to [bus 08-09]
867[ 1.051146] pci 0000:06:04.0: bridge window [io 0xd000-0xdfff]
868[ 1.051191] pci 0000:06:04.0: bridge window [mem 0xfba00000-0xfbafffff]
869[ 1.051243] pci 0000:06:05.0: PCI bridge to [bus 0a-0a]
870[ 1.051284] pci 0000:06:05.0: bridge window [io 0xc000-0xcfff]
871[ 1.051329] pci 0000:06:05.0: bridge window [mem 0xfb900000-0xfb9fffff]
872[ 1.051380] pci 0000:06:06.0: PCI bridge to [bus 0b-0b]
873[ 1.051424] pci 0000:06:06.0: bridge window [mem 0xfb800000-0xfb8fffff]
874[ 1.051469] pci 0000:06:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
875[ 1.051528] pci 0000:06:07.0: PCI bridge to [bus 0c-0c]
876[ 1.051584] pci 0000:06:08.0: PCI bridge to [bus 0d-0d]
877[ 1.051641] pci 0000:06:09.0: PCI bridge to [bus 0e-0e]
878[ 1.051697] pci 0000:05:00.0: PCI bridge to [bus 06-0e]
879[ 1.051736] pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
880[ 1.051781] pci 0000:05:00.0: bridge window [mem 0xfb800000-0xfbafffff]
881[ 1.051826] pci 0000:05:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
882[ 1.051885] pci 0000:00:1c.7: PCI bridge to [bus 05-0e]
883[ 1.051924] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
884[ 1.051968] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbbfffff]
885[ 1.052011] pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
886[ 1.052077] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
887[ 1.052550] pci 0000:00:1c.0: setting latency timer to 64
888[ 1.052557] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
889[ 1.052600] pci 0000:00:1c.4: setting latency timer to 64
890[ 1.052607] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
891[ 1.052650] pci 0000:00:1c.5: setting latency timer to 64
892[ 1.052657] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
893[ 1.052700] pci 0000:00:1c.6: setting latency timer to 64
894[ 1.052707] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
895[ 1.052750] pci 0000:00:1c.7: setting latency timer to 64
896[ 1.052758] pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
897[ 1.052802] pci 0000:05:00.0: setting latency timer to 64
898[ 1.052809] pci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
899[ 1.052853] pci 0000:06:01.0: setting latency timer to 64
900[ 1.052860] pci 0000:06:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
901[ 1.052904] pci 0000:06:04.0: setting latency timer to 64
902[ 1.052914] pci 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
903[ 1.052961] pci 0000:08:00.0: setting latency timer to 64
904[ 1.052970] pci 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
905[ 1.053014] pci 0000:06:05.0: setting latency timer to 64
906[ 1.053021] pci 0000:06:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
907[ 1.053066] pci 0000:06:06.0: setting latency timer to 64
908[ 1.053072] pci 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
909[ 1.053115] pci 0000:06:07.0: setting latency timer to 64
910[ 1.053122] pci 0000:06:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
911[ 1.053166] pci 0000:06:08.0: setting latency timer to 64
912[ 1.053174] pci 0000:06:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
913[ 1.053218] pci 0000:06:09.0: setting latency timer to 64
914[ 1.053221] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
915[ 1.053222] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
916[ 1.053223] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
917[ 1.053224] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
918[ 1.053225] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
919[ 1.053226] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
920[ 1.053227] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
921[ 1.053228] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
922[ 1.053229] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
923[ 1.053230] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
924[ 1.053231] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
925[ 1.053232] pci_bus 0000:05: resource 0 [io 0xc000-0xdfff]
926[ 1.053233] pci_bus 0000:05: resource 1 [mem 0xfb800000-0xfbbfffff]
927[ 1.053234] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
928[ 1.053235] pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
929[ 1.053235] pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfbafffff]
930[ 1.053236] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
931[ 1.053237] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
932[ 1.053238] pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff]
933[ 1.053239] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
934[ 1.053240] pci_bus 0000:09: resource 1 [mem 0xfba00000-0xfbafffff]
935[ 1.053241] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
936[ 1.053242] pci_bus 0000:0a: resource 1 [mem 0xfb900000-0xfb9fffff]
937[ 1.053243] pci_bus 0000:0b: resource 1 [mem 0xfb800000-0xfb8fffff]
938[ 1.053244] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
939[ 1.053261] NET: Registered protocol family 2
940[ 1.053404] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
941[ 1.053895] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
942[ 1.054726] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
943[ 1.054861] TCP: Hash tables configured (established 524288 bind 65536)
944[ 1.054902] TCP reno registered
945[ 1.054944] UDP hash table entries: 4096 (order: 5, 131072 bytes)
946[ 1.055003] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
947[ 1.055090] NET: Registered protocol family 1
948[ 1.055133] pci 0000:00:02.0: Boot video device
949[ 1.055143] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
950[ 1.179969] pci 0000:00:1a.0: PCI INT A disabled
951[ 1.180033] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
952[ 1.307603] pci 0000:00:1d.0: PCI INT A disabled
953[ 1.307661] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
954[ 1.307740] pci 0000:03:00.0: PCI INT A disabled
955[ 1.307785] pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
956[ 1.307858] pci 0000:04:00.0: PCI INT A disabled
957[ 1.307932] PCI: CLS 64 bytes, default 64
958[ 1.307933] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
959[ 1.307973] Placing 64MB software IO TLB between ffff8800aa8ff000 - ffff8800ae8ff000
960[ 1.308024] software IO TLB at phys 0xaa8ff000 - 0xae8ff000
961[ 1.308371] audit: initializing netlink socket (disabled)
962[ 1.308415] type=2000 audit(1341970420.088:1): initialized
963[ 1.324884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
964[ 1.338119] VFS: Disk quotas dquot_6.5.2
965[ 1.338180] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
966[ 1.338424] fuse init (API version 7.17)
967[ 1.338496] msgmni has been set to 15331
968[ 1.338720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
969[ 1.338785] io scheduler noop registered
970[ 1.338823] io scheduler deadline registered
971[ 1.338870] io scheduler cfq registered (default)
972[ 1.338970] pcieport 0000:00:1c.0: setting latency timer to 64
973[ 1.339033] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
974[ 1.339119] pcieport 0000:00:1c.4: setting latency timer to 64
975[ 1.339170] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
976[ 1.339242] pcieport 0000:00:1c.5: setting latency timer to 64
977[ 1.339293] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
978[ 1.339364] pcieport 0000:00:1c.6: setting latency timer to 64
979[ 1.339415] pcieport 0000:00:1c.6: irq 43 for MSI/MSI-X
980[ 1.339498] pcieport 0000:00:1c.7: setting latency timer to 64
981[ 1.339548] pcieport 0000:00:1c.7: irq 44 for MSI/MSI-X
982[ 1.339631] pcieport 0000:05:00.0: setting latency timer to 64
983[ 1.339707] pcieport 0000:05:00.0: irq 45 for MSI/MSI-X
984[ 1.339815] pcieport 0000:06:01.0: setting latency timer to 64
985[ 1.339892] pcieport 0000:06:01.0: irq 46 for MSI/MSI-X
986[ 1.339999] pcieport 0000:06:04.0: setting latency timer to 64
987[ 1.340075] pcieport 0000:06:04.0: irq 47 for MSI/MSI-X
988[ 1.340183] pcieport 0000:06:05.0: setting latency timer to 64
989[ 1.340260] pcieport 0000:06:05.0: irq 48 for MSI/MSI-X
990[ 1.340368] pcieport 0000:06:06.0: setting latency timer to 64
991[ 1.340444] pcieport 0000:06:06.0: irq 49 for MSI/MSI-X
992[ 1.340552] pcieport 0000:06:07.0: setting latency timer to 64
993[ 1.340628] pcieport 0000:06:07.0: irq 50 for MSI/MSI-X
994[ 1.340735] pcieport 0000:06:08.0: setting latency timer to 64
995[ 1.340812] pcieport 0000:06:08.0: irq 51 for MSI/MSI-X
996[ 1.340919] pcieport 0000:06:09.0: setting latency timer to 64
997[ 1.340996] pcieport 0000:06:09.0: irq 52 for MSI/MSI-X
998[ 1.341110] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
999[ 1.341155] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
1000[ 1.341170] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
1001[ 1.341211] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
1002[ 1.341254] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
1003[ 1.341269] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
1004[ 1.341309] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
1005[ 1.341352] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
1006[ 1.341367] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
1007[ 1.341408] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
1008[ 1.341451] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
1009[ 1.341466] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
1010[ 1.341506] pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
1011[ 1.341547] pcieport 0000:06:01.0: Signaling PME through PCIe PME interrupt
1012[ 1.341588] pcieport 0000:06:04.0: Signaling PME through PCIe PME interrupt
1013[ 1.341628] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
1014[ 1.341668] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
1015[ 1.341708] pcieport 0000:06:05.0: Signaling PME through PCIe PME interrupt
1016[ 1.341749] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
1017[ 1.341789] pcieport 0000:06:06.0: Signaling PME through PCIe PME interrupt
1018[ 1.341830] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
1019[ 1.341870] pcieport 0000:06:07.0: Signaling PME through PCIe PME interrupt
1020[ 1.341911] pcieport 0000:06:08.0: Signaling PME through PCIe PME interrupt
1021[ 1.341952] pcieport 0000:06:09.0: Signaling PME through PCIe PME interrupt
1022[ 1.341995] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
1023[ 1.342003] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
1024[ 1.342050] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
1025[ 1.342112] intel_idle: MWAIT substates: 0x1120
1026[ 1.342113] intel_idle: v0.4 model 0x2A
1027[ 1.342113] intel_idle: lapic_timer_reliable_states 0xffffffff
1028[ 1.342161] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
1029[ 1.342214] ACPI: Power Button [PWRB]
1030[ 1.342266] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
1031[ 1.342317] ACPI: Power Button [PWRF]
1032[ 1.344574] ERST: Table is not found!
1033[ 1.344611] GHES: HEST is not enabled!
1034[ 1.344679] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
1035[ 1.365042] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
1036[ 1.423800] Freeing initrd memory: 38244k freed
1037[ 1.571405] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
1038[ 1.606892] Linux agpgart interface v0.103
1039[ 1.606975] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
1040[ 1.607087] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
1041[ 1.608085] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
1042[ 1.608206] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
1043[ 1.608896] brd: module loaded
1044[ 1.609261] loop: module loaded
1045[ 1.609352] ahci 0000:00:1f.2: version 3.0
1046[ 1.609360] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
1047[ 1.609438] ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
1048[ 1.609457] ahci: SSS flag set, parallel bus scan disabled
1049[ 1.622737] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
1050[ 1.622789] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
1051[ 1.622845] ahci 0000:00:1f.2: setting latency timer to 64
1052[ 1.662787] scsi0 : ahci
1053[ 1.662861] scsi1 : ahci
1054[ 1.662928] scsi2 : ahci
1055[ 1.662996] scsi3 : ahci
1056[ 1.663062] scsi4 : ahci
1057[ 1.663129] scsi5 : ahci
1058[ 1.663221] ata1: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05100 irq 53
1059[ 1.663272] ata2: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05180 irq 53
1060[ 1.663323] ata3: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05200 irq 53
1061[ 1.663375] ata4: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05280 irq 53
1062[ 1.663426] ata5: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05300 irq 53
1063[ 1.663478] ata6: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05380 irq 53
1064[ 1.663539] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
1065[ 1.663712] ahci 0000:02:00.0: irq 54 for MSI/MSI-X
1066[ 1.663765] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
1067[ 1.663817] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
1068[ 1.663872] ahci 0000:02:00.0: setting latency timer to 64
1069[ 1.663998] scsi6 : ahci
1070[ 1.664068] scsi7 : ahci
1071[ 1.664123] ata7: SATA max UDMA/133 abar m2048@0xfbe10000 port 0xfbe10100 irq 54
1072[ 1.664175] ata8: SATA max UDMA/133 abar m2048@0xfbe10000 port 0xfbe10180 irq 54
1073[ 1.664364] Fixed MDIO Bus: probed
1074[ 1.664406] tun: Universal TUN/TAP device driver, 1.6
1075[ 1.664444] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1076[ 1.664509] PPP generic driver version 2.4.2
1077[ 1.664597] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1078[ 1.664644] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
1079[ 1.664694] ehci_hcd 0000:00:1a.0: setting latency timer to 64
1080[ 1.664696] ehci_hcd 0000:00:1a.0: EHCI Host Controller
1081[ 1.664756] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
1082[ 1.664826] ehci_hcd 0000:00:1a.0: debug port 2
1083[ 1.668745] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
1084[ 1.668754] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf07000
1085[ 1.682533] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
1086[ 1.682628] hub 1-0:1.0: USB hub found
1087[ 1.682666] hub 1-0:1.0: 2 ports detected
1088[ 1.682734] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
1089[ 1.682783] ehci_hcd 0000:00:1d.0: setting latency timer to 64
1090[ 1.682786] ehci_hcd 0000:00:1d.0: EHCI Host Controller
1091[ 1.682848] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
1092[ 1.682916] ehci_hcd 0000:00:1d.0: debug port 2
1093[ 1.686821] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
1094[ 1.686830] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf06000
1095[ 1.702476] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
1096[ 1.702565] hub 2-0:1.0: USB hub found
1097[ 1.702602] hub 2-0:1.0: 2 ports detected
1098[ 1.702665] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1099[ 1.702709] uhci_hcd: USB Universal Host Controller Interface driver
1100[ 1.702762] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
1101[ 1.702817] xhci_hcd 0000:03:00.0: setting latency timer to 64
1102[ 1.702819] xhci_hcd 0000:03:00.0: xHCI Host Controller
1103[ 1.702884] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
1104[ 1.703049] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbd00000
1105[ 1.703167] xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X
1106[ 1.703255] xHCI xhci_add_endpoint called for root hub
1107[ 1.703256] xHCI xhci_check_bandwidth called for root hub
1108[ 1.703268] hub 3-0:1.0: USB hub found
1109[ 1.703310] hub 3-0:1.0: 2 ports detected
1110[ 1.703375] xhci_hcd 0000:03:00.0: xHCI Host Controller
1111[ 1.703435] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
1112[ 1.703527] xHCI xhci_add_endpoint called for root hub
1113[ 1.703528] xHCI xhci_check_bandwidth called for root hub
1114[ 1.703537] hub 4-0:1.0: USB hub found
1115[ 1.703579] hub 4-0:1.0: 2 ports detected
1116[ 1.758321] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
1117[ 1.758375] xhci_hcd 0000:04:00.0: setting latency timer to 64
1118[ 1.758378] xhci_hcd 0000:04:00.0: xHCI Host Controller
1119[ 1.758440] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
1120[ 1.758604] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfbc00000
1121[ 1.758721] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
1122[ 1.758807] xHCI xhci_add_endpoint called for root hub
1123[ 1.758808] xHCI xhci_check_bandwidth called for root hub
1124[ 1.758818] hub 5-0:1.0: USB hub found
1125[ 1.758860] hub 5-0:1.0: 2 ports detected
1126[ 1.758926] xhci_hcd 0000:04:00.0: xHCI Host Controller
1127[ 1.758986] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
1128[ 1.759078] xHCI xhci_add_endpoint called for root hub
1129[ 1.759078] xHCI xhci_check_bandwidth called for root hub
1130[ 1.759087] hub 6-0:1.0: USB hub found
1131[ 1.759130] hub 6-0:1.0: 2 ports detected
1132[ 1.826137] usbcore: registered new interface driver libusual
1133[ 1.826190] i8042: PNP: No PS/2 controller found. Probing ports directly.
1134[ 1.828653] serio: i8042 KBD port at 0x60,0x64 irq 1
1135[ 1.828693] serio: i8042 AUX port at 0x60,0x64 irq 12
1136[ 1.828789] mousedev: PS/2 mouse device common for all mice
1137[ 1.828905] rtc_cmos 00:04: RTC can wake from S4
1138[ 1.829436] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
1139[ 1.829501] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
1140[ 1.829570] device-mapper: uevent: version 1.0.3
1141[ 1.829637] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
1142[ 1.829767] cpuidle: using governor ladder
1143[ 1.829924] cpuidle: using governor menu
1144[ 1.829960] EFI Variables Facility v0.08 2004-May-17
1145[ 1.830075] TCP cubic registered
1146[ 1.830159] NET: Registered protocol family 10
1147[ 1.830359] NET: Registered protocol family 17
1148[ 1.830398] Registering the dns_resolver key type
1149[ 1.830502] registered taskstats version 1
1150[ 1.839740] Magic number: 4:962:558
1151[ 1.839790] tty ttyS30: hash matches
1152[ 1.839837] misc vga_arbiter: hash matches
1153[ 1.839935] rtc_cmos 00:04: setting system clock to 2012-07-11 01:33:41 UTC (1341970421)
1154[ 1.840646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
1155[ 1.840685] EDD information not available.
1156[ 1.981714] ata8: SATA link down (SStatus 0 SControl 330)
1157[ 1.981716] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1158[ 1.981825] ata7: SATA link down (SStatus 0 SControl 330)
1159[ 1.993649] usb 1-1: new high-speed USB device number 2 using ehci_hcd
1160[ 2.125968] hub 1-1:1.0: USB hub found
1161[ 2.126199] hub 1-1:1.0: 6 ports detected
1162[ 2.131266] ata1.00: ATA-9: Patriot Wildfire, 319ABBF0, max UDMA/133
1163[ 2.131305] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
1164[ 2.236959] usb 2-1: new high-speed USB device number 2 using ehci_hcd
1165[ 2.282919] ata1.00: configured for UDMA/133
1166[ 2.283070] scsi 0:0:0:0: Direct-Access ATA Patriot Wildfire 319A PQ: 0 ANSI: 5
1167[ 2.283200] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
1168[ 2.283222] sd 0:0:0:0: Attached scsi generic sg0 type 0
1169[ 2.283339] sd 0:0:0:0: [sda] Write Protect is off
1170[ 2.283378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
1171[ 2.283385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1172[ 2.283807] sda: unknown partition table
1173[ 2.283937] sd 0:0:0:0: [sda] Attached SCSI disk
1174[ 2.304759] Refined TSC clocksource calibration: 3392.293 MHz.
1175[ 2.304798] Switching to clocksource tsc
1176[ 2.369267] hub 2-1:1.0: USB hub found
1177[ 2.369377] hub 2-1:1.0: 8 ports detected
1178[ 2.440546] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
1179[ 2.599921] ata2: SATA link down (SStatus 0 SControl 300)
1180[ 2.639976] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
1181[ 2.732475] hub 2-1.1:1.0: USB hub found
1182[ 2.732709] hub 2-1.1:1.0: 4 ports detected
1183[ 2.803507] usb 2-1.3: new high-speed USB device number 4 using ehci_hcd
1184[ 2.897129] hub 2-1.3:1.0: USB hub found
1185[ 2.897486] hub 2-1.3:1.0: 4 ports detected
1186[ 2.919005] ata3: SATA link down (SStatus 0 SControl 300)
1187[ 3.002935] usb 2-1.1.1: new low-speed USB device number 5 using ehci_hcd
1188[ 3.222431] usb 2-1.3.3: new full-speed USB device number 6 using ehci_hcd
1189[ 3.238093] ata4: SATA link down (SStatus 0 SControl 300)
1190[ 3.385963] usb 2-1.3.4: new low-speed USB device number 7 using ehci_hcd
1191[ 3.557181] ata5: SATA link down (SStatus 0 SControl 300)
1192[ 4.043800] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
1193[ 4.047454] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
1194[ 4.047496] ata6.00: applying bridge limits
1195[ 4.052435] ata6.00: configured for UDMA/33
1196[ 4.061922] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
1197[ 4.066700] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
1198[ 4.066751] cdrom: Uniform CD-ROM driver Revision: 3.20
1199[ 4.066870] sr 5:0:0:0: Attached scsi CD-ROM sr0
1200[ 4.066938] sr 5:0:0:0: Attached scsi generic sg1 type 5
1201[ 4.067761] Freeing unused kernel memory: 920k freed
1202[ 4.067849] Write protecting the kernel read-only data: 12288k
1203[ 4.070144] Freeing unused kernel memory: 1616k freed
1204[ 4.071909] Freeing unused kernel memory: 1200k freed
1205[ 4.114939] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input2
1206[ 4.115100] generic-usb 0003:046D:C503.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1/input0
1207[ 4.146429] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input3
1208[ 4.146596] generic-usb 0003:046D:C503.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1/input1
1209[ 4.162035] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/input/input4
1210[ 4.162242] generic-usb 0003:046D:C503.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1/input2
1211[ 4.164030] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.4/2-1.3.4:1.0/input/input5
1212[ 4.164235] generic-usb 0003:062A:0000.0004: input,hidraw3: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1.3.4/input0
1213[ 4.164296] usbcore: registered new interface driver usbhid
1214[ 4.164334] usbhid: USB HID core driver
1215[ 9.668165] RPC: Registered named UNIX socket transport module.
1216[ 9.668166] RPC: Registered udp transport module.
1217[ 9.668167] RPC: Registered tcp transport module.
1218[ 9.668167] RPC: Registered tcp NFSv4.1 backchannel transport module.
1219[ 9.673090] 8021q: Unknown symbol garp_unregister_application (err 0)
1220[ 9.673099] 8021q: Unknown symbol garp_request_leave (err 0)
1221[ 9.673103] 8021q: Unknown symbol garp_register_application (err 0)
1222[ 9.673110] 8021q: Unknown symbol garp_init_applicant (err 0)
1223[ 9.673115] 8021q: Unknown symbol garp_request_join (err 0)
1224[ 9.673118] 8021q: Unknown symbol garp_uninit_applicant (err 0)
1225[ 9.687339] FS-Cache: Loaded
1226[ 9.689157] FS-Cache: Netfs 'nfs' registered for caching
1227[ 9.706192] Initializing USB Mass Storage driver...
1228[ 9.706247] usbcore: registered new interface driver usb-storage
1229[ 9.706248] USB Mass Storage support registered.
1230[ 9.708667] scsi8 : usb-storage 1-1.4:1.0
1231[ 9.708700] usbcore: registered new interface driver ums-cypress
1232[ 9.711193] usbcore: registered new interface driver usbserial
1233[ 9.711198] USB Serial support registered for generic
1234[ 9.711208] usbcore: registered new interface driver usbserial_generic
1235[ 9.711209] usbserial: USB Serial Driver core
1236[ 9.713696] USB Serial support registered for cp210x
1237[ 9.713709] usbcore: registered new interface driver cp210x
1238[ 9.713710] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
1239[ 9.716068] DC390: clustering now enabled by default. If you get problems load
1240[ 9.716069] with "disable_clustering=1" and report to maintainers
1241[ 9.718470] st: Version 20101219, fixed bufsize 32768, s/g segs 256
1242[ 9.723504] Loading iSCSI transport class v2.0-870.
1243[ 9.734142] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
1244[ 9.739121] ppa: Unknown symbol parport_register_device (err 0)
1245[ 9.739124] ppa: Unknown symbol parport_register_driver (err 0)
1246[ 9.739127] ppa: Unknown symbol parport_release (err 0)
1247[ 9.739129] ppa: Unknown symbol parport_claim (err 0)
1248[ 9.739132] ppa: Unknown symbol parport_unregister_device (err 0)
1249[ 9.739136] ppa: Unknown symbol parport_unregister_driver (err 0)
1250[ 9.741789] osst :I: Tape driver with OnStream support version 0.99.4
1251[ 9.741790] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
1252[ 9.744307] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
1253[ 9.746702] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
1254[ 9.749328] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
1255[ 9.759264] iscsi: registered transport (tcp)
1256[ 9.789040] imm: Unknown symbol parport_register_device (err 0)
1257[ 9.789044] imm: Unknown symbol parport_register_driver (err 0)
1258[ 9.789047] imm: Unknown symbol parport_release (err 0)
1259[ 9.789050] imm: Unknown symbol parport_claim (err 0)
1260[ 9.789054] imm: Unknown symbol parport_unregister_device (err 0)
1261[ 9.789058] imm: Unknown symbol parport_unregister_driver (err 0)
1262[ 9.794224] GDT-HA: Storage RAID Controller Driver. Version: 3.05
1263[ 9.796736] scsi: <fdomain> Detection failed (no card)
1264[ 9.886081] Loading Adaptec I2O RAID: Version 2.4 Build 5go
1265[ 9.886082] Detecting Adaptec I2O RAID controllers...
1266[ 9.919598] cnic: Unknown symbol __uio_register_device (err 0)
1267[ 9.919614] cnic: Unknown symbol uio_event_notify (err 0)
1268[ 9.919627] cnic: Unknown symbol uio_unregister_device (err 0)
1269[ 9.919733] bnx2i: Unknown symbol cnic_register_driver (err 0)
1270[ 9.919745] bnx2i: Unknown symbol cnic_unregister_driver (err 0)
1271[ 9.935381] Adaptec aacraid driver 1.1-7[28000]-ms
1272[ 9.942617] 3ware Storage Controller device driver for Linux v1.26.02.003.
1273[ 9.945200] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
1274[ 9.948016] yenta_socket: Unknown symbol pccard_nonstatic_ops (err 0)
1275[ 9.955472] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
1276[ 9.962914] 8139too: 8139too Fast Ethernet driver 0.9.28
1277[ 9.965328] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
1278[ 9.970310] dca service started, version 1.12.1
1279[ 9.970655] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
1280[ 9.970656] Copyright (c) 2007-2011 Intel Corporation.
1281[ 9.973516] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
1282[ 9.973517] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
1283[ 9.976174] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
1284[ 9.976175] e1000: Copyright (c) 1999-2006 Intel Corporation.
1285[ 9.978630] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
1286[ 9.978631] e100: Copyright(c) 1999-2006 Intel Corporation
1287[ 9.983932] tg3.c:v3.121 (November 2, 2011)
1288[ 9.983945] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
1289[ 9.983956] tg3 0000:0b:00.0: setting latency timer to 64
1290[ 10.035627] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:c3:e3:54
1291[ 10.035629] tg3 0000:0b:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
1292[ 10.035630] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
1293[ 10.035631] tg3 0000:0b:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
1294[ 10.038738] cnic: Unknown symbol __uio_register_device (err 0)
1295[ 10.038756] cnic: Unknown symbol uio_event_notify (err 0)
1296[ 10.038770] cnic: Unknown symbol uio_unregister_device (err 0)
1297[ 10.042315] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25)
1298[ 10.047743] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
1299[ 10.050499] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
1300[ 10.058361] generic: Unknown symbol onenand_release (err 0)
1301[ 10.058368] generic: Unknown symbol mtd_device_parse_register (err 0)
1302[ 10.058373] generic: Unknown symbol onenand_scan (err 0)
1303[ 10.061111] I2O subsystem v1.325
1304[ 10.061112] i2o: max drivers = 8
1305[ 10.063593] I2O Block Device OSM v1.325
1306[ 10.063626] block-osm: registered device at major 80
1307[ 10.066446] Fusion MPT base driver 3.04.20
1308[ 10.066447] Copyright (c) 1999-2008 LSI Corporation
1309[ 10.066895] Fusion MPT SPI Host driver 3.04.20
1310[ 10.071861] Fusion MPT SAS Host driver 3.04.20
1311[ 10.074384] Fusion MPT FC Host driver 3.04.20
1312[ 10.077020] Fusion MPT misc device (ioctl) driver 3.04.20
1313[ 10.077046] mptctl: Registered with Fusion MPT base driver
1314[ 10.077047] mptctl: /dev/mptctl @ (major,minor=10,220)
1315[ 10.084332] usbcore: registered new interface driver usbkbd
1316[ 10.084333] usbkbd: :USB HID Boot Protocol keyboard driver
1317[ 10.094015] paride: Unknown symbol parport_register_device (err 0)
1318[ 10.094021] paride: Unknown symbol parport_release (err 0)
1319[ 10.094026] paride: Unknown symbol parport_claim (err 0)
1320[ 10.094030] paride: Unknown symbol parport_unregister_device (err 0)
1321[ 10.094038] paride: Unknown symbol parport_find_base (err 0)
1322[ 10.094042] paride: Unknown symbol parport_put_port (err 0)
1323[ 10.705384] scsi 8:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 PQ: 0 ANSI: 0
1324[ 10.705872] sd 8:0:0:0: Attached scsi generic sg2 type 0
1325[ 10.706456] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
1326[ 10.707463] sd 8:0:0:0: [sdb] Write Protect is off
1327[ 10.707465] sd 8:0:0:0: [sdb] Mode Sense: 33 00 00 00
1328[ 10.708469] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
1329[ 10.770564] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
1330[ 13.109873] floppy0: no floppy controllers found
1331[ 13.184938] HP CISS Driver (v 3.6.26)
1332[ 40.942441] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
1333[ 41.037410] sd 8:0:0:0: [sdb] Attached SCSI disk
1334[ 51.362109] ISO 9660 Extensions: Microsoft Joliet Level 3
1335[ 51.434535] ISO 9660 Extensions: RRIP_1991A
1336[ 51.561333] ISO 9660 Extensions: Microsoft Joliet Level 3
1337[ 51.652411] ISO 9660 Extensions: RRIP_1991A
1338[ 59.839765] xor: automatically using best checksumming function: generic_sse
1339[ 59.856161] generic_sse: 21444.000 MB/sec
1340[ 59.856162] xor: using function: generic_sse (21444.000 MB/sec)
1341[ 59.858653] async_tx: api initialized (async)
1342[ 59.927955] raid6: int64x1 4645 MB/s
1343[ 59.995769] raid6: int64x2 5762 MB/s
1344[ 60.063571] raid6: int64x4 4951 MB/s
1345[ 60.131377] raid6: int64x8 3917 MB/s
1346[ 60.199183] raid6: sse2x1 12931 MB/s
1347[ 60.266987] raid6: sse2x2 15977 MB/s
1348[ 60.334792] raid6: sse2x4 18384 MB/s
1349[ 60.334793] raid6: using algorithm sse2x4 (18384 MB/s)
1350[ 60.360332] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1351[ 60.366687] Netfilter messages via NETLINK v0.30.
1352[ 60.375063] Ebtables v2.0 registered
1353[ 60.379701] ip_tables: (C) 2000-2006 Netfilter Core Team
1354[ 60.392489] ip6_tables: (C) 2000-2006 Netfilter Core Team
1355[ 60.397279] Bluetooth: Core ver 2.16
1356[ 60.397287] NET: Registered protocol family 31
1357[ 60.397288] Bluetooth: HCI device and connection manager initialized
1358[ 60.397289] Bluetooth: HCI socket layer initialized
1359[ 60.397289] Bluetooth: L2CAP socket layer initialized
1360[ 60.397292] Bluetooth: SCO socket layer initialized
1361[ 60.397423] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1362[ 60.397424] Bluetooth: BNEP filters: protocol multicast
1363[ 60.399674] Bluetooth: RFCOMM TTY layer initialized
1364[ 60.399676] Bluetooth: RFCOMM socket layer initialized
1365[ 60.399677] Bluetooth: RFCOMM ver 1.11
1366[ 60.407781] 8021q: Unknown symbol garp_unregister_application (err 0)
1367[ 60.407797] 8021q: Unknown symbol garp_request_leave (err 0)
1368[ 60.407808] 8021q: Unknown symbol garp_register_application (err 0)
1369[ 60.407822] 8021q: Unknown symbol garp_init_applicant (err 0)
1370[ 60.407833] 8021q: Unknown symbol garp_request_join (err 0)
1371[ 60.407841] 8021q: Unknown symbol garp_uninit_applicant (err 0)
1372[ 60.416625] JFS: nTxBlock = 8192, nTxLock = 65536
1373[ 60.420791] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
1374[ 60.434304] Btrfs loaded
1375[ 60.439357] OCFS2 Node Manager 1.5.0
1376[ 60.441931] OCFS2 DLM 1.5.0
1377[ 60.445075] ocfs2: Unknown symbol ocfs2_dlm_lock_status (err 0)
1378[ 60.445107] ocfs2: Unknown symbol ocfs2_stack_supports_plocks (err 0)
1379[ 60.445132] ocfs2: Unknown symbol ocfs2_cluster_connect (err 0)
1380[ 60.445143] ocfs2: Unknown symbol qtree_entry_unused (err 0)
1381[ 60.445173] ocfs2: Unknown symbol ocfs2_dlm_dump_lksb (err 0)
1382[ 60.445181] ocfs2: Unknown symbol ocfs2_stack_glue_set_max_proto_version (err 0)
1383[ 60.445192] ocfs2: Unknown symbol ocfs2_cluster_this_node (err 0)
1384[ 60.445202] ocfs2: Unknown symbol qtree_write_dquot (err 0)
1385[ 60.445209] ocfs2: Unknown symbol ocfs2_dlm_lock (err 0)
1386[ 60.445219] ocfs2: Unknown symbol ocfs2_dlm_lvb_valid (err 0)
1387[ 60.445237] ocfs2: Unknown symbol qtree_release_dquot (err 0)
1388[ 60.445246] ocfs2: Unknown symbol ocfs2_dlm_unlock (err 0)
1389[ 60.445268] ocfs2: Unknown symbol qtree_read_dquot (err 0)
1390[ 60.445281] ocfs2: Unknown symbol ocfs2_plock (err 0)
1391[ 60.445326] ocfs2: Unknown symbol ocfs2_dlm_lvb (err 0)
1392[ 60.445352] ocfs2: Unknown symbol ocfs2_cluster_disconnect (err 0)
1393[ 60.445362] ocfs2: Unknown symbol ocfs2_cluster_hangup (err 0)
1394[ 60.451499] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
1395[ 60.451759] SGI XFS Quota Management subsystem
1396[ 60.479445] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
1397[ 60.483803] device-mapper: multipath: version 1.3.0 loaded
1398[ 60.483877] device-mapper: multipath round-robin: version 1.0.0 loaded
1399[ 60.486000] md: raid1 personality registered for level 1
1400[ 60.490052] md: multipath personality registered for level -4
1401[ 60.492161] md: raid0 personality registered for level 0
1402[ 60.496714] md: raid6 personality registered for level 6
1403[ 60.496716] md: raid5 personality registered for level 5
1404[ 60.496717] md: raid4 personality registered for level 4
1405[ 60.500976] md: raid10 personality registered for level 10
1406[ 60.507529] md: linear personality registered for level -1
1407[ 60.511632] mei: module is from the staging directory, the quality is unknown, you have been warned.
1408[ 60.511812] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
1409[ 60.511818] mei 0000:00:16.0: setting latency timer to 64
1410[ 60.511874] mei 0000:00:16.0: irq 57 for MSI/MSI-X
1411[ 60.522882] wmi: Mapper loaded
1412[ 60.527654] [drm] Initialized drm 1.1.0 20060810
1413[ 60.532697] i915: Unknown symbol i2c_bit_add_bus (err 0)
1414[ 60.535945] lp: driver loaded but no devices found
1415[ 60.538401] ppdev: user-space parallel port driver
1416[ 60.544773] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1417[ 60.546922] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1418[ 60.549138] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1419[ 60.551477] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1420[ 60.553609] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1421[ 60.557835] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1422[ 60.560066] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0)
1423[ 60.562335] lirc_dev: IR Remote Control driver registered, major 244
1424[ 60.564390] mceusb: Unknown symbol ir_raw_event_handle (err 0)
1425[ 60.564402] mceusb: Unknown symbol ir_raw_event_store (err 0)
1426[ 60.564417] mceusb: Unknown symbol rc_register_device (err 0)
1427[ 60.564429] mceusb: Unknown symbol rc_free_device (err 0)
1428[ 60.564438] mceusb: Unknown symbol rc_allocate_device (err 0)
1429[ 60.564450] mceusb: Unknown symbol ir_raw_event_store_with_filter (err 0)
1430[ 60.564459] mceusb: Unknown symbol rc_unregister_device (err 0)
1431[ 60.577376] usbcore: registered new interface driver uas
1432[ 60.585580] ppa: Version 2.07 (for Linux 2.4.x)
1433[ 60.594459] Loading Adaptec I2O RAID: Version 2.4 Build 5go
1434[ 60.594461] Detecting Adaptec I2O RAID controllers...
1435[ 60.624920] imm: Version 2.05 (for Linux 2.4.0)
1436[ 60.703417] scsi: <fdomain> Detection failed (no card)
1437[ 60.755220] cnic: Unknown symbol __uio_register_device (err 0)
1438[ 60.755247] cnic: Unknown symbol uio_event_notify (err 0)
1439[ 60.755271] cnic: Unknown symbol uio_unregister_device (err 0)
1440[ 60.767617] yenta_socket: Unknown symbol pccard_nonstatic_ops (err 0)
1441[ 60.774417] usbcore: registered new interface driver asix
1442[ 60.798677] cnic: Unknown symbol __uio_register_device (err 0)
1443[ 60.798705] cnic: Unknown symbol uio_event_notify (err 0)
1444[ 60.798728] cnic: Unknown symbol uio_unregister_device (err 0)
1445[ 60.814916] generic: Unknown symbol onenand_release (err 0)
1446[ 60.814930] generic: Unknown symbol mtd_device_parse_register (err 0)
1447[ 60.814941] generic: Unknown symbol onenand_scan (err 0)
1448[ 63.852752] floppy0: no floppy controllers found
144901:35 -------------
145001:35 /proc/mdstat:
145101:35 -------------
1452Personalities : [raid1] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] [linear]
1453unused devices: <none>
145401:35 -------------
145501:35 /proc/swaps:
145601:35 -------------
1457Filename Type Size Used Priority
145801:35 -------------
145901:35 /proc/filesystems:
146001:35 -------------
1461nodev sysfs
1462nodev rootfs
1463nodev bdev
1464nodev proc
1465nodev cgroup
1466nodev cpuset
1467nodev tmpfs
1468nodev devtmpfs
1469nodev debugfs
1470nodev securityfs
1471nodev sockfs
1472nodev pipefs
1473nodev anon_inodefs
1474nodev devpts
1475 ext3
1476 ext4
1477nodev ramfs
1478nodev hugetlbfs
1479nodev ecryptfs
1480 fuseblk
1481nodev fuse
1482nodev fusectl
1483nodev pstore
1484nodev mqueue
1485nodev rpc_pipefs
1486nodev nfs
1487nodev nfs4
1488 iso9660
1489 vfat
1490 jfs
1491nodev nfsd
1492 minix
1493 reiserfs
1494nodev binfmt_misc
1495nodev cifs
1496 btrfs
1497nodev configfs
1498 xfs
1499 ext2
1500 msdos
150101:35 -------------
150201:35 /proc/partitions:
150301:35 -------------
1504major minor #blocks name
1505
1506 8 0 117220824 sda
1507 11 0 115976 sr0
1508 8 16 312571224 sdb
1509 8 17 36700461 sdb1
1510 8 18 36700492 sdb2
1511 8 19 2096482 sdb3
1512 8 20 1 sdb4
1513 8 21 146633256 sdb5
1514 8 22 90438656 sdb6
151501:35 -------------
151601:35 fdisk result:
151701:35 -------------
1518
1519Disk /dev/sda: 120.0 GB, 120034123776 bytes
1520255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
1521Units = sectors of 1 * 512 = 512 bytes
1522Sector size (logical/physical): 512 bytes / 512 bytes
1523I/O size (minimum/optimal): 512 bytes / 512 bytes
1524Disk identifier: 0x00000000
1525
1526
1527Disk /dev/sdb: 320.1 GB, 320072933376 bytes
1528255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
1529Units = sectors of 1 * 512 = 512 bytes
1530Sector size (logical/physical): 512 bytes / 512 bytes
1531I/O size (minimum/optimal): 512 bytes / 512 bytes
1532Disk identifier: 0x669b64ae
1533
1534 Device Boot Start End Blocks Id System
1535/dev/sdb1 * 63 73400984 36700461 7 HPFS/NTFS/exFAT
1536/dev/sdb2 73400985 146801969 36700492+ 83 Linux
1537/dev/sdb3 146801970 150994934 2096482+ 82 Linux swap / Solaris
1538/dev/sdb4 150994935 625141759 237073412+ f W95 Ext'd (LBA)
1539/dev/sdb5 150994998 444261509 146633256 7 HPFS/NTFS/exFAT
1540/dev/sdb6 444264448 625141759 90438656 83 Linux
154101:35 -------------
154201:35 /tmp/mondo-restore.cfg result:
154301:35 -------------
1544media-size 0
1545files-in-filelist 598002
1546last-filelist-number 971
1547internal-tape-block-size 32768
1548use-lzo no
1549use-gzip no
1550use-star no
1551use-comp yes
1552datestamp Tue Jul 10 06:30:52 EDT 2012
1553total-slices 499
1554iso-dev /dev/sdc2
1555iso-mnt /mnt/sdc2
1556iso-prefix testwmedia-mup-2012-07-10
1557isodir cManual/testwmedia/mondo/image
1558bootloader.device /dev/sda
1559bootloader.name GRUB
1560bootloader.ver
1561backup-media-type iso
1562differential 0
1563acl TRUE
1564xattr TRUE
156501:35 backup-media-type is specified in config file - great.
156601:35 Calling post-init
156701:35 Executing preliminary script
1568Here is my /tmp/mountlist.txt
1569/dev/sda1 / ext4 57609216
1570/dev/sda2 /mnt/sda2 ext4 57609216
1571/dev/sdb1 /mnt/sdb1 ext4 1953512001
1572/dev/sdc2 /mnt/sdc2 ext4 731881237
1573/dev/sde1 /mnt/sde1 ext4 38073024
1574/dev/sda3 swap swap 1999868
157501:35 mondorestore found; cool...
157601:35 mount-me found
157701:35 unmount-me found
157801:35 mondorestore found
157901:35 ------------------EXPERT MODE------------------
158001:35 You do all the work. :-)
158101:35 Type 'mondorestore' to begin the restore/compare process.
158201:35 Launching Shell
1583[TH=7824] libmondo-tools.c->reset_bkpinfo#772: Hi
1584root is mounted at rootfs
1585
1586No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
1587[TH=7824] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
1588 [TH=7824] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2979: bkpinfo->tmpdir is being set to //mondo.tmp.rxIXom
1589 [TH=7824] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2990: bkpinfo->scratchdir is being set to //mondo.scratch.17767
1590running: mkdir -p /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1591--------------------------------start of output-----------------------------
1592--------------------------------end of output------------------------------
1593...ran just fine. :-)
1594root is mounted at rootfs
1595
1596No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
1597[TH=7824] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
1598running: mount / -o remount,rw > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1599--------------------------------start of output-----------------------------
1600--------------------------------end of output------------------------------
1601...ran just fine. :-)
1602[Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 3.200000
1603[Main] mondorestore.c->main#2893: FYI - g_mountlist_fname = /tmp/mountlist.txt
1604running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1605--------------------------------start of output-----------------------------
1606--------------------------------end of output------------------------------
1607...ran just fine. :-)
1608running: umount -d /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1609--------------------------------start of output-----------------------------
1610umount: can't umount /mnt/cdrom: Invalid argument
1611--------------------------------end of output------------------------------
1612...ran with res=256
1613running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1614--------------------------------start of output-----------------------------
1615--------------------------------end of output------------------------------
1616...ran just fine. :-)
1617-------------- Mondo Restore v3.0.2-r3018 -------------
1618DON'T PANIC! Mondorestore logs almost everything, so please
1619don't break out in a cold sweat just because you see a few
1620error messages in the log. Read them; analyze them; see if
1621they are significant; above all, verify your backups! Please
1622attach a compressed copy of this log to any e-mail you send
1623to the Mondo mailing list when you are seeking technical
1624support. Without it, we can't help you. - DevTeam
1625------------------------------------------------------------
1626BTW, despite (or perhaps because of) the wealth of messages,
1627some users are inclined to stop reading this log. If Mondo
1628stopped for some reason, chances are it's detailed here.
1629More than likely there's a message at the very end of this
1630log that will tell you what is wrong. Please read it!
1631------------------------------------------------------------
1632[Main] mondorestore.c->main#2928: I am in disaster recovery mode
1633 [Main] mondorestore.c->main#2933: what time is it
1634 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found afio at /bin/afio
1635running: which mkfs.vfat > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1636--------------------------------start of output-----------------------------
1637/sbin/mkfs.vfat
1638--------------------------------end of output------------------------------
1639...ran just fine. :-)
1640 [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:-
1641[Main] mondorestore.c->main#3108: I must be in disaster recovery mode.
1642 [Main] mondorestore.c->main#3109: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt
1643 [Main] mondorestore.c->main#3111: About to call load_mountlist and load_raidtab
1644root is mounted at rootfs
1645
1646No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
1647[Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
1648[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cdrom mounted?
1649 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cdrom " > /dev/null 2> /dev/null'
1650 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#677: NB: CDROM device not mounted, mounting...
1651running: mount /dev/cdrom /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1652--------------------------------start of output-----------------------------
1653mount: block device /dev/scd0 is write-protected, mounting read-only
1654--------------------------------end of output------------------------------
1655...ran just fine. :-)
1656 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W]
1657[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#787: We will restore ACLs
1658 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
1659[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#795: We will restore XATTRs
1660 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
1661[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768
1662 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0'
1663 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup
1664 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#915: isodir=/mnt/sdc2cManual/testwmedia/mondo/image; iso-dev=/dev/sdc2
1665[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdc2 mounted?
1666 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdc2 " > /dev/null 2> /dev/null'
1667running: mount /dev/sdc2 /tmp/isodir > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1668--------------------------------start of output-----------------------------
1669mount: /dev/sdc2 is not a valid block device
1670--------------------------------end of output------------------------------
1671...ran with res=8192
1672[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#935: Unable to mount isodir. Perhaps this is really a CD backup?
1673running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1674--------------------------------start of output-----------------------------
1675/dev/scd0 on /mnt/cdrom type iso9660 (ro,relatime)
1676--------------------------------end of output------------------------------
1677...ran just fine. :-)
1678 [Main] libmondo-devices.c->mount_media#1383: mount_media() - media already mounted. Fair enough.
1679[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#944: You backed up to disk, then burned some CDs.
1680 [Main] libmondo-mountlist.c->load_mountlist#830: Loading mountlist...
1681 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda1
1682 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda1 / ext4 57609216
1683 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda2
1684 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda2 /mnt/sda2 ext4 57609216
1685 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdb1
1686 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdb1 /mnt/sdb1 ext4 1953512001
1687 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sdc2
1688 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sdc2 /mnt/sdc2 ext4 731881237
1689 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sde1
1690 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sde1 /mnt/sde1 ext4 38073024
1691 [Main] libmondo-mountlist.c->load_mountlist#841: no label found for /dev/sda3
1692 [Main] libmondo-mountlist.c->load_mountlist#901: /dev/sda3 swap swap 1999868
1693 [Main] libmondo-mountlist.c->load_mountlist#913: Mountlist loaded successfully.
1694 [Main] libmondo-mountlist.c->load_mountlist#914: 6 entries in mountlist
1695 [Main] libmondo-files.c->length_of_file#537: filename=/etc/raidtab
1696Unable to openin filename (No such file or directory)
1697 [Main] libmondo-raid.c->load_raidtab_into_raidlist#609: Raidtab is very small or non-existent. Ignoring it.
1698 [Main] mondorestore.c->main#3116: Returned from calling load_mountlist and load_raidtab successfully
1699[Main] mondorestore.c->main#3151: Send in the clowns.
1700 [Main] mondorestore.c->main#3158: catchall
1701 [Main] mondorestore.c->catchall_mode#265: inside catchall
1702 [Main] mondorestore.c->catchall_mode#270: pre wrm
1703 [Main] mondorestore.c->catchall_mode#272: post wrm
1704 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2213: media type = iso
1705
1706 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2668: prefix set to testwmedia-mup-2012-07-10
1707 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2853: isodir =
1708 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2854: netfs_mount = ''
1709 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2863: media device = /dev/cdrom
1710 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2864: media size = 2046976
1711 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2865: media type = iso
1712 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2866: prefix = testwmedia-mup-2012-07-10
1713 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2867: compression = 5
1714 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2868: exclude_path = (null)
1715 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2869: include_path =
1716 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2877: scratchdir = '//mondo.scratch.17767/mondo.scratch.5756'
1717 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2878: tmpdir = '//mondo.tmp.rxIXom'
1718 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2879: image_devs = ''
1719 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2881: boot_device = '' (loader=)
1720 [Main] mondorestore.c->catchall_mode#289: post int
1721 [Main] mondo-rstr-tools.c->iso_fiddly_bits#300: Setting isodir to /tmp/isodir
1722 [Main] mondo-rstr-newt.c->get_isodir_info#2292: isodir_path = /tmp/isodir
1723 [Main] mondo-rstr-newt.c->get_isodir_info#2326: isodir_device = /dev/sdb6 - isodir_format = - isodir_path = /mnt/sd6
1724[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdb6 mounted?
1725 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdb6 " > /dev/null 2> /dev/null'
1726running: df -m > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1727--------------------------------start of output-----------------------------
1728Filesystem 1M-blocks Used Available Use Mounted on
1729none 5 1 5 1 /dev
1730none 3854 0 3854 0 /dev/shm
1731/dev/shm 128 4 125 3 /tmp
1732/dev/sr0 114 114 0 100 /cdrom
1733--------------------------------end of output------------------------------
1734...ran just fine. :-)
1735[Main] mondo-rstr-tools.c->iso_fiddly_bits#321: The 'mount' command is 'mount /dev/sdb6 -o ro /tmp/isodir'. PLEASE report this command to be if you have problems, ok?
1736running: mount /dev/sdb6 -o ro /tmp/isodir > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1737--------------------------------start of output-----------------------------
1738--------------------------------end of output------------------------------
1739...ran just fine. :-)
1740I have mounted the device where the ISO files are stored.
1741running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1742--------------------------------start of output-----------------------------
1743--------------------------------end of output------------------------------
1744...ran with res=256
1745 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom
1746running: mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1747--------------------------------start of output-----------------------------
1748/tmp/isodir/testwmedia-mup-2012-07-10-1.iso: No such file or directory
1749--------------------------------end of output------------------------------
1750...ran with res=8192
1751 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
1752running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1753--------------------------------start of output-----------------------------
1754--------------------------------end of output------------------------------
1755...ran just fine. :-)
1756running: mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1757--------------------------------start of output-----------------------------
1758/tmp/isodir/testwmedia-mup-2012-07-10-1.iso: No such file or directory
1759--------------------------------end of output------------------------------
1760...ran with res=8192
1761 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
1762running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1763--------------------------------start of output-----------------------------
1764--------------------------------end of output------------------------------
1765...ran just fine. :-)
1766 [Main] libmondo-devices.c->mount_media#1464: Failed, despite 2 attempts
1767 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
1768[Main] mondo-rstr-tools.c->iso_fiddly_bits#339: ISO #0 has been mounted via loopback mount
1769 [Main] mondo-rstr-tools.c->iso_fiddly_bits#346: 346: bkpinfo->isodir is now /tmp/isodir
1770 [Main] mondorestore.c->catchall_mode#297: catchall_mode --- iso_fiddly_bits ok
1771 [Main] mondorestore.c->catchall_mode#302: IM selected
1772 [Main] mondorestore.c->interactive_mode#449: interactive_mode --- starting (great, assertions OK)
1773 [Main] mondorestore.c->interactive_mode#458: interactive_mode --- assertions OK
1774 [Main] mondorestore.c->interactive_mode#468: About to load config file
1775 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2151: gcffa --- starting
1776I'm thinking...
1777running: mkdir -p //mondo.tmp.rxIXom/mount.bootdisk > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1778--------------------------------start of output-----------------------------
1779--------------------------------end of output------------------------------
1780...ran just fine. :-)
1781 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2167: mountpt = //mondo.tmp.rxIXom/mount.bootdisk; cfg_file=//mondo.tmp.rxIXom/tmp/mondo-restore.cfg
1782 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2170: gcffa --- we don't have cfg file yet.
1783 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2174: gcffa --- calling mount_media now :)
1784running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1785--------------------------------start of output-----------------------------
1786--------------------------------end of output------------------------------
1787...ran with res=256
1788 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom
1789running: mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1790--------------------------------start of output-----------------------------
1791/tmp/isodir/testwmedia-mup-2012-07-10-1.iso: No such file or directory
1792--------------------------------end of output------------------------------
1793...ran with res=8192
1794 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
1795running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1796--------------------------------start of output-----------------------------
1797--------------------------------end of output------------------------------
1798...ran just fine. :-)
1799running: mount /tmp/isodir/testwmedia-mup-2012-07-10-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1800--------------------------------start of output-----------------------------
1801/tmp/isodir/testwmedia-mup-2012-07-10-1.iso: No such file or directory
1802--------------------------------end of output------------------------------
1803...ran with res=8192
1804 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
1805running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1806--------------------------------start of output-----------------------------
1807--------------------------------end of output------------------------------
1808...ran just fine. :-)
1809 [Main] libmondo-devices.c->mount_media#1464: Failed, despite 2 attempts
1810 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
1811 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2187: gcffa --- OK, switching to Plan B
1812running: mkdir -p tmp > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1813--------------------------------start of output-----------------------------
1814--------------------------------end of output------------------------------
1815...ran just fine. :-)
1816running: mt -f /dev/cdrom setblk 32768 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1817--------------------------------start of output-----------------------------
1818mt: invalid argument `setblk' for `operation'
1819Valid arguments are:
1820- `eof', `weof'
1821- `fsf'
1822- `bsf'
1823- `fsr'
1824- `bsr'
1825- `rewind'
1826- `offline', `rewoffl', `eject'
1827- `status'
1828- `bsfm'
1829- `eom'
1830- `retension'
1831- `erase'
1832- `asf'
1833- `fsfm'
1834- `seek'
1835--------------------------------end of output------------------------------
1836...ran with res=512
1837 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2088: command = 'dd if=/dev/cdrom bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm'
1838running: dd if=/dev/cdrom bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1839--------------------------------start of output-----------------------------
1840tar: invalid gzip magic
1841--------------------------------end of output------------------------------
1842...ran with res=256
1843 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2095: pre-2.2.4 compatible mode on
1844 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2103: command = 'dd if=/dev/cdrom bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm'
1845running: dd if=/dev/cdrom bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1846--------------------------------start of output-----------------------------
1847tar: invalid gzip magic
1848--------------------------------end of output------------------------------
1849...ran with res=256
1850running: mt -f /dev/st0 setblk 32768 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1851--------------------------------start of output-----------------------------
1852mt: invalid argument `setblk' for `operation'
1853Valid arguments are:
1854- `eof', `weof'
1855- `fsf'
1856- `bsf'
1857- `fsr'
1858- `bsr'
1859- `rewind'
1860- `offline', `rewoffl', `eject'
1861- `status'
1862- `bsfm'
1863- `eom'
1864- `retension'
1865- `erase'
1866- `asf'
1867- `fsfm'
1868- `seek'
1869--------------------------------end of output------------------------------
1870...ran with res=512
1871 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2088: command = 'dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm'
1872running: dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1873--------------------------------start of output-----------------------------
1874tar: short read
1875--------------------------------end of output------------------------------
1876...ran with res=256
1877 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2095: pre-2.2.4 compatible mode on
1878 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2103: command = 'dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm'
1879running: dd if=/dev/st0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1880--------------------------------start of output-----------------------------
1881tar: short read
1882--------------------------------end of output------------------------------
1883...ran with res=256
1884running: mt -f /dev/osst0 setblk 32768 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1885--------------------------------start of output-----------------------------
1886mt: invalid argument `setblk' for `operation'
1887Valid arguments are:
1888- `eof', `weof'
1889- `fsf'
1890- `bsf'
1891- `fsr'
1892- `bsr'
1893- `rewind'
1894- `offline', `rewoffl', `eject'
1895- `status'
1896- `bsfm'
1897- `eom'
1898- `retension'
1899- `erase'
1900- `asf'
1901- `fsfm'
1902- `seek'
1903--------------------------------end of output------------------------------
1904...ran with res=512
1905 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2088: command = 'dd if=/dev/osst0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm'
1906running: dd if=/dev/osst0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1907--------------------------------start of output-----------------------------
1908tar: short read
1909--------------------------------end of output------------------------------
1910...ran with res=256
1911 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2095: pre-2.2.4 compatible mode on
1912 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2103: command = 'dd if=/dev/osst0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm'
1913running: dd if=/dev/osst0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1914--------------------------------start of output-----------------------------
1915tar: short read
1916--------------------------------end of output------------------------------
1917...ran with res=256
1918running: mt -f /dev/ht0 setblk 32768 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1919--------------------------------start of output-----------------------------
1920mt: invalid argument `setblk' for `operation'
1921Valid arguments are:
1922- `eof', `weof'
1923- `fsf'
1924- `bsf'
1925- `fsr'
1926- `bsr'
1927- `rewind'
1928- `offline', `rewoffl', `eject'
1929- `status'
1930- `bsfm'
1931- `eom'
1932- `retension'
1933- `erase'
1934- `asf'
1935- `fsfm'
1936- `seek'
1937--------------------------------end of output------------------------------
1938...ran with res=512
1939 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2088: command = 'dd if=/dev/ht0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm'
1940running: dd if=/dev/ht0 bs=32768 count=1024 2> /dev/null | tar -zx ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1941--------------------------------start of output-----------------------------
1942tar: short read
1943--------------------------------end of output------------------------------
1944...ran with res=256
1945 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2095: pre-2.2.4 compatible mode on
1946 [Main] mondo-rstr-tools.c->extract_cfg_file_and_mountlist_from_tape_dev#2103: command = 'dd if=/dev/ht0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm'
1947running: dd if=/dev/ht0 bs=32768 count=1024 2> /dev/null | tar -zx tmp/mountlist.txt tmp/mondo-restore.cfg tmp/biggielist.txt tmp/filelist.full.gz tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1948--------------------------------start of output-----------------------------
1949tar: short read
1950--------------------------------end of output------------------------------
1951...ran with res=256
1952 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2208: I tried lots of devices but none worked.
1953Cannot find config info on media
1954 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2213: media type = iso
1955
1956 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2668: prefix set to testwmedia-mup-2012-07-09
1957 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2853: isodir = /tmp/isodir
1958 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2854: netfs_mount = ''
1959 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2863: media device = /dev/cdrom
1960 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2864: media size = 2046976
1961 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2865: media type = iso
1962 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2866: prefix = testwmedia-mup-2012-07-09
1963 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2867: compression = 5
1964 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2868: exclude_path = (null)
1965 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2869: include_path =
1966 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2877: scratchdir = '//mondo.scratch.17767/mondo.scratch.5756'
1967 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2878: tmpdir = '//mondo.tmp.rxIXom'
1968 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2879: image_devs = ''
1969 [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2881: boot_device = '' (loader=)
1970 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2151: gcffa --- starting
1971I'm thinking...
1972running: mkdir -p //mondo.tmp.rxIXom/mount.bootdisk > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1973--------------------------------start of output-----------------------------
1974--------------------------------end of output------------------------------
1975...ran just fine. :-)
1976 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2167: mountpt = //mondo.tmp.rxIXom/mount.bootdisk; cfg_file=//mondo.tmp.rxIXom/tmp/mondo-restore.cfg
1977 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2170: gcffa --- we don't have cfg file yet.
1978 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2174: gcffa --- calling mount_media now :)
1979running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1980--------------------------------start of output-----------------------------
1981--------------------------------end of output------------------------------
1982...ran with res=256
1983 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /tmp/isodir/testwmedia-mup-2012-07-09-1.iso -t iso9660 -o loop,ro /mnt/cdrom
1984running: mount /tmp/isodir/testwmedia-mup-2012-07-09-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1985--------------------------------start of output-----------------------------
1986--------------------------------end of output------------------------------
1987...ran just fine. :-)
1988 [Main] libmondo-devices.c->mount_media#1466: Mounted media drive OK
1989 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2177: gcffa --- managed to mount CD; so, no need for Plan B
1990 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2232: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz
1991running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
1992--------------------------------start of output-----------------------------
1993./tmp/mondo-restore.cfg
1994./tmp/biggielist.txt
1995./tmp/filelist.full.gz
1996./tmp/mountlist.txt
1997./tmp/i-want-my-lvm
1998--------------------------------end of output------------------------------
1999...ran just fine. :-)
2000[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2248: gcffa --- great! We've got the config file
2001 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2253: cp -f /mondo.tmp.rxIXom/tmp/mondo-restore.cfg //mondo.tmp.rxIXom/tmp/mondo-restore.cfg
2002running: cp -f /mondo.tmp.rxIXom/tmp/mondo-restore.cfg //mondo.tmp.rxIXom/tmp/mondo-restore.cfg > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2003--------------------------------start of output-----------------------------
2004cp: '/mondo.tmp.rxIXom/tmp/mondo-restore.cfg' and '//mondo.tmp.rxIXom/tmp/mondo-restore.cfg' are the same file
2005--------------------------------end of output------------------------------
2006...ran with res=256
2007[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2258: ... but an error occurred when I tried to move it to //mondo.tmp.rxIXom/tmp/mondo-restore.cfg
2008 [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2265: cp -f /mondo.tmp.rxIXom/tmp/mountlist.txt //mondo.tmp.rxIXom/tmp/mountlist.txt
2009running: umount -d /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2010--------------------------------start of output-----------------------------
2011--------------------------------end of output------------------------------
2012...ran just fine. :-)
2013Recovered mondo-restore.cfg
2014running: cp -f //mondo.tmp.rxIXom/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2015--------------------------------start of output-----------------------------
2016--------------------------------end of output------------------------------
2017...ran just fine. :-)
2018running: cp -f etc/raidtab /etc/ > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2019--------------------------------start of output-----------------------------
2020cp: can't stat 'etc/raidtab': No such file or directory
2021--------------------------------end of output------------------------------
2022...ran with res=256
2023root is mounted at rootfs
2024
2025No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
2026[Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
2027[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/cdrom mounted?
2028 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cdrom " > /dev/null 2> /dev/null'
2029 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#677: NB: CDROM device not mounted, mounting...
2030running: mount /dev/cdrom /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2031--------------------------------start of output-----------------------------
2032mount: block device /dev/scd0 is write-protected, mounting read-only
2033--------------------------------end of output------------------------------
2034...ran just fine. :-)
2035 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#765: Backup medium is CD-R[W]
2036[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#787: We will restore ACLs
2037 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
2038[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#795: We will restore XATTRs
2039 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
2040[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#804: Internal tape block size has been custom-set to 32768
2041 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#843: differential var = '0'
2042 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#847: This is a regular (full) backup
2043 [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#915: isodir=/mnt/sdc2cManual/testwmedia/mondo/image; iso-dev=/dev/sdc2
2044[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sdc2 mounted?
2045 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sdc2 " > /dev/null 2> /dev/null'
2046running: mount /dev/sdc2 /tmp/isodir > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2047--------------------------------start of output-----------------------------
2048mount: /dev/sdc2 is not a valid block device
2049--------------------------------end of output------------------------------
2050...ran with res=8192
2051[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#935: Unable to mount isodir. Perhaps this is really a CD backup?
2052running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2053--------------------------------start of output-----------------------------
2054/dev/scd0 on /mnt/cdrom type iso9660 (ro,relatime)
2055--------------------------------end of output------------------------------
2056...ran just fine. :-)
2057 [Main] libmondo-devices.c->mount_media#1383: mount_media() - media already mounted. Fair enough.
2058[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#944: You backed up to disk, then burned some CDs.
2059 [Main] mondorestore.c->interactive_mode#471: Done loading config file; resizing ML
2060 [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist
2061 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2062 [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM
2063[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 114473 --> 114473
2064Expanding entries to suit drive /dev/sda (114473 MB)
2065[Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/sda
2066Disk /dev/sda was 114470 MB; is now 114473 MB; Proportionally resizing partitions (factor ~= 1.00002)
2067Changing /dev/sda1 from 57609216 KB to 57610224 KB
2068Changing /dev/sda2 from 57609216 KB to 57610224 KB
2069Changing /dev/sda3 from 1999868 KB to 1999903 KB
2070Last partition size calculated would be under-allocated, increasing /dev/sda3 from 1999903 KB to 1999904 KB.
2071final_size = 114473 MB
2072[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 305245 --> 305245
2073Expanding entries to suit drive /dev/sdb (305245 MB)
2074[Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/sdb
2075Disk /dev/sdb was 1907726 MB; is now 305245 MB; Proportionally resizing partitions (factor ~= 0.16000)
2076Changing /dev/sdb1 from 1953512001 KB to 312570880 KB
2077
2078final_size = 305245 MB
2079[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sdc: No such device or address
2080[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sdc for reading: No such device or address
2081[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2082[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdc --> -1 or -1 --> -1
2083 [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2518: Not resizing to match /dev/sdc - can't find drive
2084[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sde: No such device or address
2085[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sde for reading: No such device or address
2086[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2087[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sde --> -1 or -1 --> -1
2088 [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2518: Not resizing to match /dev/sde - can't find drive
2089Mountlist adjusted to suit current hard drive(s)
2090 [Main] mondorestore.c->interactive_mode#488: About to edit mountlist
2091 [Main] mondo-rstr-newt.c->edit_mountlist#2090: entering eml
2092 [Main] mondo-rstr-newt.c->edit_mountlist#2096: I'm in GUI mode, so I shall edit mountlist using edit_mountlist()
2093 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2094 [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist...
2095[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 114473 --> 114473
2096 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 114473 MB
2097 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
2098Found MBR partition table format type
2099 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
2100Found MBR partition table format type
2101 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #5 in mountlist
2102Found MBR partition table format type
2103 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sda.
2104 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist
2105[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdb --> -1 or 305245 --> 305245
2106 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sdb is 305245 MB
2107 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sdb1 on /dev/sdb #2 in mountlist
2108Found MBR partition table format type
2109 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist
2110[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sdc: No such device or address
2111[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sdc for reading: No such device or address
2112[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2113[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdc --> -1 or -1 --> -1
2114 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#403: /dev/sdc does not exist.
2115 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sdc does not exist.
2116[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sde: No such device or address
2117[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sde for reading: No such device or address
2118[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2119[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sde --> -1 or -1 --> -1
2120 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#403: /dev/sde does not exist.
2121 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sde does not exist.
2122 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2123 [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist...
2124[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 114473 --> 114473
2125 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 114473 MB
2126 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
2127Found MBR partition table format type
2128 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
2129Found MBR partition table format type
2130 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #2 in mountlist
2131Found MBR partition table format type
2132 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sda.
2133 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist
2134[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sdc: No such device or address
2135[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sdc for reading: No such device or address
2136[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2137[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sdc --> -1 or -1 --> -1
2138 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#403: /dev/sdc does not exist.
2139 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sdc does not exist.
2140[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sde: No such device or address
2141[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sde for reading: No such device or address
2142[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2143[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sde --> -1 or -1 --> -1
2144 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#403: /dev/sde does not exist.
2145 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sde does not exist.
2146 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2147 [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist...
2148[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 114473 --> 114473
2149 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 114473 MB
2150 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
2151Found MBR partition table format type
2152 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
2153Found MBR partition table format type
2154 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #2 in mountlist
2155Found MBR partition table format type
2156 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sda.
2157 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist
2158[Main] libmondo-devices.c->get_phys_size_of_drive#1004: Error getting size of /dev/sde: No such device or address
2159[Main] libmondo-devices.c->get_phys_size_of_drive#1027: Failed to open /dev/sde for reading: No such device or address
2160[Main] libmondo-devices.c->get_phys_size_of_drive#1030: Failed to get harddisk geometry, using old mode
2161[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sde --> -1 or -1 --> -1
2162 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#403: /dev/sde does not exist.
2163 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#530: Error in evaluate_drive_within_mountlist: /dev/sde does not exist.
2164 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2165 [Main] libmondo-mountlist.c->evaluate_mountlist#568: Evaluating mountlist...
2166[Main] libmondo-devices.c->get_phys_size_of_drive#1042: /dev/sda --> -1 or 114473 --> 114473
2167 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#415: /dev/sda is 114473 MB
2168 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
2169Found MBR partition table format type
2170 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
2171Found MBR partition table format type
2172 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#425: Processing partition /dev/sda3 on /dev/sda #2 in mountlist
2173Found MBR partition table format type
2174 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#517: 2 MB unallocated on /dev/sda.
2175 [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#527: Fine, no error in evaluate_drive_within_mountlist
2176 [Main] mondo-rstr-newt.c->edit_mountlist_in_newt#2068: You pushed 'OK'. I shall now continue.
2177 [Main] mondo-rstr-newt.c->edit_mountlist#2099: leaving eml
2178 [Main] mondorestore.c->interactive_mode#497: Finished editing mountlist
2179 [Main] mondorestore.c->interactive_mode#501: Proceeding...
2180 [Main] libmondo-mountlist.c->save_mountlist_to_disk#938: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt
2181 [Main] libmondo-raid.c->save_raidlist_to_raidtab#291: Deleting raidtab (no RAID devs anyway)
2182Restoring Interactively
2183 [Main] mondo-prep.c->partition_everything#1983: partition_everything() --- starting
2184Partitioning hard drives
2185Stopping all LVMs, just in case
2186 [Main] mondo-prep.c->do_my_funky_lvm_stuff#238: STARTING
2187[Main] mondo-prep.c->do_my_funky_lvm_stuff#239: OK, opened i-want-my-lvm. Shutting down LVM volumes...
2188 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found lvm at /sbin/lvm
2189[Main] mondo-prep.c->do_my_funky_lvm_stuff#267: Closed i-want-my-lvm. Finished erasing LVMs.
2190 [Main] mondo-prep.c->do_my_funky_lvm_stuff#416: ENDING
2191[Main] mondo-prep.c->do_my_funky_lvm_stuff#421: Not many errors. Returning 0.
2192Stopping all software RAID devices, just in case
2193Done.
2194 [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#667: Making list of drives
2195 [Main] mondo-prep.c->partition_drive#1530: Partitioning drive /dev/sda
2196 [Main] mondo-prep.c->partition_drive#1615: Found partition /dev/sda1 in mountlist
2197 [Main] mondo-prep.c->partition_drive#1618: Wiping /dev/sda's partition table
2198 [Main] mondo-prep.c->partition_drive#1640: New, kernel-friendly partition remover
2199 [Main] mondo-prep.c->partition_device#1769: partition_device('/dev/sda', 1, 0, 'ext4', 57610224) --- starting
2200 [Main] mondo-prep.c->partition_device#1788: Partitioning device /dev/sda1 (56259 MB)
2201[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda1 mounted?
2202 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
2203Found MBR partition table format type
2204[Main] mondo-prep.c->partition_device#1867: Doing the new all-in-one fdisk thing
2205[Main] mondo-prep.c->partition_device#1868: output = 'n
2206p
22071
2208
2209+57610224K
2210'
2211[Main] mondo-prep.c->partition_device#1873: Successfully created partition 1 on /dev/sda
2212[Main] mondo-prep.c->partition_device#1879: Trying to set partition 1 type now on /dev/sda
2213[Main] mondo-prep.c->set_partition_type#2138: Setting /dev/sda1's type to ext4 (83)
2214 [Main] mondo-prep.c->partition_device#1949: partition_device() --- leaving
2215 [Main] mondo-prep.c->partition_drive#1615: Found partition /dev/sda2 in mountlist
2216 [Main] mondo-prep.c->partition_device#1769: partition_device('/dev/sda', 2, 1, 'ext4', 57610224) --- starting
2217 [Main] mondo-prep.c->partition_device#1788: Partitioning device /dev/sda2 (56259 MB)
2218[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda2 mounted?
2219 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
2220Found MBR partition table format type
2221[Main] mondo-prep.c->partition_device#1867: Doing the new all-in-one fdisk thing
2222[Main] mondo-prep.c->partition_device#1868: output = 'n
2223p
22242
2225
2226+57610224K
2227'
2228[Main] mondo-prep.c->partition_device#1873: Successfully created partition 2 on /dev/sda
2229[Main] mondo-prep.c->partition_device#1879: Trying to set partition 2 type now on /dev/sda
2230[Main] mondo-prep.c->set_partition_type#2138: Setting /dev/sda2's type to ext4 (83)
2231 [Main] mondo-prep.c->partition_device#1949: partition_device() --- leaving
2232 [Main] mondo-prep.c->partition_drive#1615: Found partition /dev/sda3 in mountlist
2233 [Main] mondo-prep.c->partition_device#1769: partition_device('/dev/sda', 3, 2, 'swap', 1999904) --- starting
2234 [Main] mondo-prep.c->partition_device#1788: Partitioning device /dev/sda3 (1953 MB)
2235[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda3 mounted?
2236 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null'
2237Found MBR partition table format type
2238[Main] mondo-prep.c->partition_device#1867: Doing the new all-in-one fdisk thing
2239[Main] mondo-prep.c->partition_device#1868: output = 'n
2240p
22413
2242
2243+1999904K
2244'
2245[Main] mondo-prep.c->partition_device#1873: Successfully created partition 3 on /dev/sda
2246[Main] mondo-prep.c->partition_device#1879: Trying to set partition 3 type now on /dev/sda
2247[Main] mondo-prep.c->set_partition_type#2138: Setting /dev/sda3's type to swap (82)
2248 [Main] mondo-prep.c->partition_device#1949: partition_device() --- leaving
2249------------------- fdisk.log looks like this ------------------
2250Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
2251Building a new DOS disklabel with disk identifier 0x91d43b95.
2252Changes will remain in memory only, until you decide to write them.
2253After that, of course, the previous content won't be recoverable.
2254
2255Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
2256
2257Command (m for help): No partition is defined yet!
2258
2259Command (m for help): 2: unknown command
2260Command action
2261 a toggle a bootable flag
2262 b edit bsd disklabel
2263 c toggle the dos compatibility flag
2264 d delete a partition
2265 l list known partition types
2266 m print this menu
2267 n add a new partition
2268 o create a new empty DOS partition table
2269 p print the partition table
2270 q quit without saving changes
2271 s create a new empty Sun disklabel
2272 t change a partition's system id
2273 u change display/entry units
2274 v verify the partition table
2275 w write table to disk and exit
2276 x extra functionality (experts only)
2277
2278Command (m for help): No partition is defined yet!
2279
2280Command (m for help): 1: unknown command
2281Command action
2282 a toggle a bootable flag
2283 b edit bsd disklabel
2284 c toggle the dos compatibility flag
2285 d delete a partition
2286 l list known partition types
2287 m print this menu
2288 n add a new partition
2289 o create a new empty DOS partition table
2290 p print the partition table
2291 q quit without saving changes
2292 s create a new empty Sun disklabel
2293 t change a partition's system id
2294 u change display/entry units
2295 v verify the partition table
2296 w write table to disk and exit
2297 x extra functionality (experts only)
2298
2299Command (m for help): No partition is defined yet!
2300
2301Command (m for help): 1: unknown command
2302Command action
2303 a toggle a bootable flag
2304 b edit bsd disklabel
2305 c toggle the dos compatibility flag
2306 d delete a partition
2307 l list known partition types
2308 m print this menu
2309 n add a new partition
2310 o create a new empty DOS partition table
2311 p print the partition table
2312 q quit without saving changes
2313 s create a new empty Sun disklabel
2314 t change a partition's system id
2315 u change display/entry units
2316 v verify the partition table
2317 w write table to disk and exit
2318 x extra functionality (experts only)
2319
2320Command (m for help): No partition is defined yet!
2321
2322Command (m for help): 1: unknown command
2323Command action
2324 a toggle a bootable flag
2325 b edit bsd disklabel
2326 c toggle the dos compatibility flag
2327 d delete a partition
2328 l list known partition types
2329 m print this menu
2330 n add a new partition
2331 o create a new empty DOS partition table
2332 p print the partition table
2333 q quit without saving changes
2334 s create a new empty Sun disklabel
2335 t change a partition's system id
2336 u change display/entry units
2337 v verify the partition table
2338 w write table to disk and exit
2339 x extra functionality (experts only)
2340
2341Command (m for help): No partition is defined yet!
2342
2343Command (m for help): 1: unknown command
2344Command action
2345 a toggle a bootable flag
2346 b edit bsd disklabel
2347 c toggle the dos compatibility flag
2348 d delete a partition
2349 l list known partition types
2350 m print this menu
2351 n add a new partition
2352 o create a new empty DOS partition table
2353 p print the partition table
2354 q quit without saving changes
2355 s create a new empty Sun disklabel
2356 t change a partition's system id
2357 u change display/entry units
2358 v verify the partition table
2359 w write table to disk and exit
2360 x extra functionality (experts only)
2361
2362Command (m for help): No partition is defined yet!
2363
2364Command (m for help): 1: unknown command
2365Command action
2366 a toggle a bootable flag
2367 b edit bsd disklabel
2368 c toggle the dos compatibility flag
2369 d delete a partition
2370 l list known partition types
2371 m print this menu
2372 n add a new partition
2373 o create a new empty DOS partition table
2374 p print the partition table
2375 q quit without saving changes
2376 s create a new empty Sun disklabel
2377 t change a partition's system id
2378 u change display/entry units
2379 v verify the partition table
2380 w write table to disk and exit
2381 x extra functionality (experts only)
2382
2383Command (m for help): No partition is defined yet!
2384
2385Command (m for help): 1: unknown command
2386Command action
2387 a toggle a bootable flag
2388 b edit bsd disklabel
2389 c toggle the dos compatibility flag
2390 d delete a partition
2391 l list known partition types
2392 m print this menu
2393 n add a new partition
2394 o create a new empty DOS partition table
2395 p print the partition table
2396 q quit without saving changes
2397 s create a new empty Sun disklabel
2398 t change a partition's system id
2399 u change display/entry units
2400 v verify the partition table
2401 w write table to disk and exit
2402 x extra functionality (experts only)
2403
2404Command (m for help): No partition is defined yet!
2405
2406Command (m for help): 1: unknown command
2407Command action
2408 a toggle a bootable flag
2409 b edit bsd disklabel
2410 c toggle the dos compatibility flag
2411 d delete a partition
2412 l list known partition types
2413 m print this menu
2414 n add a new partition
2415 o create a new empty DOS partition table
2416 p print the partition table
2417 q quit without saving changes
2418 s create a new empty Sun disklabel
2419 t change a partition's system id
2420 u change display/entry units
2421 v verify the partition table
2422 w write table to disk and exit
2423 x extra functionality (experts only)
2424
2425Command (m for help): No partition is defined yet!
2426
2427Command (m for help): 1: unknown command
2428Command action
2429 a toggle a bootable flag
2430 b edit bsd disklabel
2431 c toggle the dos compatibility flag
2432 d delete a partition
2433 l list known partition types
2434 m print this menu
2435 n add a new partition
2436 o create a new empty DOS partition table
2437 p print the partition table
2438 q quit without saving changes
2439 s create a new empty Sun disklabel
2440 t change a partition's system id
2441 u change display/entry units
2442 v verify the partition table
2443 w write table to disk and exit
2444 x extra functionality (experts only)
2445
2446Command (m for help): No partition is defined yet!
2447
2448Command (m for help): 1: unknown command
2449Command action
2450 a toggle a bootable flag
2451 b edit bsd disklabel
2452 c toggle the dos compatibility flag
2453 d delete a partition
2454 l list known partition types
2455 m print this menu
2456 n add a new partition
2457 o create a new empty DOS partition table
2458 p print the partition table
2459 q quit without saving changes
2460 s create a new empty Sun disklabel
2461 t change a partition's system id
2462 u change display/entry units
2463 v verify the partition table
2464 w write table to disk and exit
2465 x extra functionality (experts only)
2466
2467Command (m for help): No partition is defined yet!
2468
2469Command (m for help): 1: unknown command
2470Command action
2471 a toggle a bootable flag
2472 b edit bsd disklabel
2473 c toggle the dos compatibility flag
2474 d delete a partition
2475 l list known partition types
2476 m print this menu
2477 n add a new partition
2478 o create a new empty DOS partition table
2479 p print the partition table
2480 q quit without saving changes
2481 s create a new empty Sun disklabel
2482 t change a partition's system id
2483 u change display/entry units
2484 v verify the partition table
2485 w write table to disk and exit
2486 x extra functionality (experts only)
2487
2488Command (m for help): No partition is defined yet!
2489
2490Command (m for help): 9: unknown command
2491Command action
2492 a toggle a bootable flag
2493 b edit bsd disklabel
2494 c toggle the dos compatibility flag
2495 d delete a partition
2496 l list known partition types
2497 m print this menu
2498 n add a new partition
2499 o create a new empty DOS partition table
2500 p print the partition table
2501 q quit without saving changes
2502 s create a new empty Sun disklabel
2503 t change a partition's system id
2504 u change display/entry units
2505 v verify the partition table
2506 w write table to disk and exit
2507 x extra functionality (experts only)
2508
2509Command (m for help): No partition is defined yet!
2510
2511Command (m for help): 8: unknown command
2512Command action
2513 a toggle a bootable flag
2514 b edit bsd disklabel
2515 c toggle the dos compatibility flag
2516 d delete a partition
2517 l list known partition types
2518 m print this menu
2519 n add a new partition
2520 o create a new empty DOS partition table
2521 p print the partition table
2522 q quit without saving changes
2523 s create a new empty Sun disklabel
2524 t change a partition's system id
2525 u change display/entry units
2526 v verify the partition table
2527 w write table to disk and exit
2528 x extra functionality (experts only)
2529
2530Command (m for help): No partition is defined yet!
2531
2532Command (m for help): 7: unknown command
2533Command action
2534 a toggle a bootable flag
2535 b edit bsd disklabel
2536 c toggle the dos compatibility flag
2537 d delete a partition
2538 l list known partition types
2539 m print this menu
2540 n add a new partition
2541 o create a new empty DOS partition table
2542 p print the partition table
2543 q quit without saving changes
2544 s create a new empty Sun disklabel
2545 t change a partition's system id
2546 u change display/entry units
2547 v verify the partition table
2548 w write table to disk and exit
2549 x extra functionality (experts only)
2550
2551Command (m for help): No partition is defined yet!
2552
2553Command (m for help): 6: unknown command
2554Command action
2555 a toggle a bootable flag
2556 b edit bsd disklabel
2557 c toggle the dos compatibility flag
2558 d delete a partition
2559 l list known partition types
2560 m print this menu
2561 n add a new partition
2562 o create a new empty DOS partition table
2563 p print the partition table
2564 q quit without saving changes
2565 s create a new empty Sun disklabel
2566 t change a partition's system id
2567 u change display/entry units
2568 v verify the partition table
2569 w write table to disk and exit
2570 x extra functionality (experts only)
2571
2572Command (m for help): No partition is defined yet!
2573
2574Command (m for help): 5: unknown command
2575Command action
2576 a toggle a bootable flag
2577 b edit bsd disklabel
2578 c toggle the dos compatibility flag
2579 d delete a partition
2580 l list known partition types
2581 m print this menu
2582 n add a new partition
2583 o create a new empty DOS partition table
2584 p print the partition table
2585 q quit without saving changes
2586 s create a new empty Sun disklabel
2587 t change a partition's system id
2588 u change display/entry units
2589 v verify the partition table
2590 w write table to disk and exit
2591 x extra functionality (experts only)
2592
2593Command (m for help): No partition is defined yet!
2594
2595Command (m for help): 4: unknown command
2596Command action
2597 a toggle a bootable flag
2598 b edit bsd disklabel
2599 c toggle the dos compatibility flag
2600 d delete a partition
2601 l list known partition types
2602 m print this menu
2603 n add a new partition
2604 o create a new empty DOS partition table
2605 p print the partition table
2606 q quit without saving changes
2607 s create a new empty Sun disklabel
2608 t change a partition's system id
2609 u change display/entry units
2610 v verify the partition table
2611 w write table to disk and exit
2612 x extra functionality (experts only)
2613
2614Command (m for help): No partition is defined yet!
2615
2616Command (m for help): 3: unknown command
2617Command action
2618 a toggle a bootable flag
2619 b edit bsd disklabel
2620 c toggle the dos compatibility flag
2621 d delete a partition
2622 l list known partition types
2623 m print this menu
2624 n add a new partition
2625 o create a new empty DOS partition table
2626 p print the partition table
2627 q quit without saving changes
2628 s create a new empty Sun disklabel
2629 t change a partition's system id
2630 u change display/entry units
2631 v verify the partition table
2632 w write table to disk and exit
2633 x extra functionality (experts only)
2634
2635Command (m for help): No partition is defined yet!
2636
2637Command (m for help): 2: unknown command
2638Command action
2639 a toggle a bootable flag
2640 b edit bsd disklabel
2641 c toggle the dos compatibility flag
2642 d delete a partition
2643 l list known partition types
2644 m print this menu
2645 n add a new partition
2646 o create a new empty DOS partition table
2647 p print the partition table
2648 q quit without saving changes
2649 s create a new empty Sun disklabel
2650 t change a partition's system id
2651 u change display/entry units
2652 v verify the partition table
2653 w write table to disk and exit
2654 x extra functionality (experts only)
2655
2656Command (m for help): No partition is defined yet!
2657
2658Command (m for help): 1: unknown command
2659Command action
2660 a toggle a bootable flag
2661 b edit bsd disklabel
2662 c toggle the dos compatibility flag
2663 d delete a partition
2664 l list known partition types
2665 m print this menu
2666 n add a new partition
2667 o create a new empty DOS partition table
2668 p print the partition table
2669 q quit without saving changes
2670 s create a new empty Sun disklabel
2671 t change a partition's system id
2672 u change display/entry units
2673 v verify the partition table
2674 w write table to disk and exit
2675 x extra functionality (experts only)
2676
2677Command (m for help): n
2678Partition type:
2679 p primary (0 primary, 0 extended, 4 free)
2680 e extended
2681Select (default p): p
2682Partition number (1-4, default 1): 1
2683First sector (2048-234441647, default 2048):
2684Using default value 2048
2685Last sector, +sectors or +size{K,M,G} (2048-234441647, default 234441647): +57610224K
2686
2687Command (m for help):
2688Command (m for help):
2689Command (m for help): p
2690
2691Disk /dev/sda: 120.0 GB, 120034123776 bytes
2692255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
2693Units = sectors of 1 * 512 = 512 bytes
2694Sector size (logical/physical): 512 bytes / 512 bytes
2695I/O size (minimum/optimal): 512 bytes / 512 bytes
2696Disk identifier: 0x91d43b95
2697
2698 Device Boot Start End Blocks Id System
2699/dev/sda1 2048 115222495 57610224 83 Linux
2700
2701Command (m for help): n
2702Partition type:
2703 p primary (1 primary, 0 extended, 3 free)
2704 e extended
2705Select (default p): p
2706Partition number (1-4, default 2): 2
2707First sector (115222496-234441647, default 115222496):
2708Using default value 115222496
2709Last sector, +sectors or +size{K,M,G} (115222496-234441647, default 234441647): +57610224K
2710
2711Command (m for help):
2712Command (m for help):
2713Command (m for help): p
2714
2715Disk /dev/sda: 120.0 GB, 120034123776 bytes
2716255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
2717Units = sectors of 1 * 512 = 512 bytes
2718Sector size (logical/physical): 512 bytes / 512 bytes
2719I/O size (minimum/optimal): 512 bytes / 512 bytes
2720Disk identifier: 0x91d43b95
2721
2722 Device Boot Start End Blocks Id System
2723/dev/sda1 2048 115222495 57610224 83 Linux
2724/dev/sda2 115222496 230442943 57610224 83 Linux
2725
2726Command (m for help): n
2727Partition type:
2728 p primary (2 primary, 0 extended, 2 free)
2729 e extended
2730Select (default p): p
2731Partition number (1-4, default 3): 3
2732First sector (230442944-234441647, default 230442944):
2733Using default value 230442944
2734Last sector, +sectors or +size{K,M,G} (230442944-234441647, default 234441647): +1999904K
2735Value out of range.
2736Last sector, +sectors or +size{K,M,G} (230442944-234441647, default 234441647):
2737Using default value 234441647
2738
2739Command (m for help):
2740Command (m for help): p
2741
2742Disk /dev/sda: 120.0 GB, 120034123776 bytes
2743255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
2744Units = sectors of 1 * 512 = 512 bytes
2745Sector size (logical/physical): 512 bytes / 512 bytes
2746I/O size (minimum/optimal): 512 bytes / 512 bytes
2747Disk identifier: 0x91d43b95
2748
2749 Device Boot Start End Blocks Id System
2750/dev/sda1 2048 115222495 57610224 83 Linux
2751/dev/sda2 115222496 230442943 57610224 83 Linux
2752/dev/sda3 230442944 234441646 1999351+ 83 Linux
2753
2754Command (m for help): t
2755Partition number (1-4): 3
2756Hex code (type L to list codes): 82
2757Changed system type of partition 3 to 82 (Linux swap / Solaris)
2758
2759Command (m for help):
2760Command (m for help): p
2761
2762Disk /dev/sda: 120.0 GB, 120034123776 bytes
2763255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
2764Units = sectors of 1 * 512 = 512 bytes
2765Sector size (logical/physical): 512 bytes / 512 bytes
2766I/O size (minimum/optimal): 512 bytes / 512 bytes
2767Disk identifier: 0x91d43b95
2768
2769 Device Boot Start End Blocks Id System
2770/dev/sda1 2048 115222495 57610224 83 Linux
2771/dev/sda2 115222496 230442943 57610224 83 Linux
2772/dev/sda3 230442944 234441646 1999351+ 82 Linux swap / Solaris
2773
2774Command (m for help): a
2775Partition number (1-4): 1
2776
2777Command (m for help): w
2778The partition table has been altered!
2779
2780Calling ioctl() to re-read partition table.
2781Syncing disks.
2782------------------- end of fdisk.log... word! ------------------
2783Done.
2784 [Main] mondo-prep.c->format_everything#963: format_everything (mountlist, interactively = false
2785Formatting partitions
2786[Main] mondo-prep.c->format_everything#975: Stopping all RAID devices
2787[Main] mondo-prep.c->format_everything#981: Prepare soft-RAIDs
2788 [Main] mondo-prep.c->format_everything#984: Examining /dev/sda1
2789 [Main] mondo-prep.c->format_everything#984: Examining /dev/sda2
2790 [Main] mondo-prep.c->format_everything#984: Examining /dev/sda3
2791[Main] mondo-prep.c->format_everything#1011: Creating LVMs
2792 [Main] mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2361: wait_until_software_raids_are_prepped
2793Configuring LVM
2794 [Main] mondo-prep.c->do_my_funky_lvm_stuff#238: STARTING
2795[Main] mondo-prep.c->do_my_funky_lvm_stuff#239: OK, opened i-want-my-lvm. Shutting down LVM volumes...
2796 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found lvm at /sbin/lvm
2797[Main] mondo-prep.c->do_my_funky_lvm_stuff#272: OK, rewound i-want-my-lvm. Doing funky stuff...
2798lvm vgchange -an --> 0
2799lvm vgscan --> 0
2800lvm vgscan --> 0
2801[Main] mondo-prep.c->do_my_funky_lvm_stuff#399: Closed i-want-my-lvm. Finished doing funky stuff.
2802 [Main] mondo-prep.c->do_my_funky_lvm_stuff#416: ENDING
2803[Main] mondo-prep.c->do_my_funky_lvm_stuff#421: Not many errors. Returning 0.
2804LVM initialized OK
2805[Main] mondo-prep.c->format_everything#1050: Formatting regulars
2806[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda1 mounted?
2807 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
2808running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext4 -F -q /dev/sda1' > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2809--------------------------------start of output-----------------------------
2810--------------------------------end of output------------------------------
2811...ran just fine. :-)
2812...OK
2813[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda2 mounted?
2814 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
2815running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext4 -F -q /dev/sda2' > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2816--------------------------------start of output-----------------------------
2817--------------------------------end of output------------------------------
2818...ran just fine. :-)
2819...OK
2820[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda3 mounted?
2821 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null'
2822running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/sda3' > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2823--------------------------------start of output-----------------------------
2824Setting up swapspace version 1, size = 1999344 KiB
2825no label, UUID=8a92c441-e3ff-4990-bf04-7d9c666c723a
2826--------------------------------end of output------------------------------
2827...ran just fine. :-)
2828...OK
2829Done.
2830 [Main] mondo-prep.c->format_everything#1114: format_everything () - finished successfully
2831Errors during disk partitioning were handled OK.
2832Partitions were formatted OK despite those errors.
2833Mounting devices
2834[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda1 mounted?
2835 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
2836[Main] mondo-rstr-tools.c->mount_device#405: Mounting device /dev/sda1
2837 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
2838 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
2839running: mkdir -p /mnt/RESTORING > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2840--------------------------------start of output-----------------------------
2841--------------------------------end of output------------------------------
2842...ran just fine. :-)
2843 [Main] mondo-rstr-tools.c->mount_device#434: command='mount -t ext4 /dev/sda1 -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log'
2844running: mount -t ext4 /dev/sda1 -o rw,user_xattr,acl /mnt/RESTORING 2>> /var/log/mondorestore.log > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2845--------------------------------start of output-----------------------------
2846--------------------------------end of output------------------------------
2847...ran just fine. :-)
2848[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda2 mounted?
2849 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
2850[Main] mondo-rstr-tools.c->mount_device#405: Mounting device /dev/sda2
2851 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
2852 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
2853running: mkdir -p /mnt/RESTORING/mnt/sda2 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2854--------------------------------start of output-----------------------------
2855--------------------------------end of output------------------------------
2856...ran just fine. :-)
2857 [Main] mondo-rstr-tools.c->mount_device#434: command='mount -t ext4 /dev/sda2 -o rw,user_xattr,acl /mnt/RESTORING/mnt/sda2 2>> /var/log/mondorestore.log'
2858running: mount -t ext4 /dev/sda2 -o rw,user_xattr,acl /mnt/RESTORING/mnt/sda2 2>> /var/log/mondorestore.log > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2859--------------------------------start of output-----------------------------
2860--------------------------------end of output------------------------------
2861...ran just fine. :-)
2862[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /dev/sda3 mounted?
2863 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda3 " > /dev/null 2> /dev/null'
2864[Main] mondo-rstr-tools.c->mount_device#405: Mounting device /dev/sda3
2865 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
2866 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
2867running: swapon /dev/sda3 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2868--------------------------------start of output-----------------------------
2869--------------------------------end of output------------------------------
2870...ran just fine. :-)
2871All partitions were mounted OK.
2872Done.
2873[Main] mondo-rstr-tools.c->mount_device#405: Mounting device /proc
2874running: mkdir -p /mnt/RESTORING/proc > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2875--------------------------------start of output-----------------------------
2876--------------------------------end of output------------------------------
2877...ran just fine. :-)
2878 [Main] mondo-rstr-tools.c->mount_device#434: command='mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log'
2879running: mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2880--------------------------------start of output-----------------------------
2881--------------------------------end of output------------------------------
2882...ran just fine. :-)
2883[Main] mondo-rstr-tools.c->mount_device#405: Mounting device /sys
2884 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfattr at /usr/bin/setfattr
2885 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found setfacl at /bin/setfacl
2886running: mkdir -p /mnt/RESTORING/sys > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2887--------------------------------start of output-----------------------------
2888--------------------------------end of output------------------------------
2889...ran just fine. :-)
2890 [Main] mondo-rstr-tools.c->mount_device#434: command='mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log'
2891running: mount -t sysfs /sys -o rw,user_xattr,acl /mnt/RESTORING/sys 2>> /var/log/mondorestore.log > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2892--------------------------------start of output-----------------------------
2893--------------------------------end of output------------------------------
2894...ran just fine. :-)
2895running: df -m > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2896--------------------------------start of output-----------------------------
2897Filesystem 1M-blocks Used Available Use Mounted on
2898none 5 1 5 2 /dev
2899none 3854 0 3854 0 /dev/shm
2900/dev/shm 128 4 125 3 /tmp
2901/dev/sr0 114 114 0 100 /cdrom
2902/dev/sdb6 86934 14994 67524 19 /tmp/isodir
2903/dev/scd0 114 114 0 100 /mnt/cdrom
2904/dev/sda1 56152 956 52384 2 /mnt/RESTORING
2905/dev/sda2 56152 956 52384 2 /mnt/RESTORING/mnt/sda2
2906--------------------------------end of output------------------------------
2907...ran just fine. :-)
2908[Main] mondorestore.c->interactive_mode#584: Restoring all data
2909 [Main] mondorestore.c->restore_everything#2708: restore_everything() --- starting
2910running: mkdir -p /mnt/RESTORING > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2911--------------------------------start of output-----------------------------
2912--------------------------------end of output------------------------------
2913...ran just fine. :-)
2914[Main] mondorestore.c->restore_everything#2713: Changing dir to /mnt/RESTORING
2915[Main] mondorestore.c->restore_everything#2716: path is now /mnt/RESTORING
2916[Main] mondorestore.c->restore_everything#2717: restoring everything
2917 [Main] libmondo-files.c->find_home_of_exe#363: find_home_of_exe() --- Could not find petris
2918Preparing to read your archives
2919running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2920--------------------------------start of output-----------------------------
2921/dev/scd0 on /mnt/cdrom type iso9660 (ro,relatime)
2922--------------------------------end of output------------------------------
2923...ran just fine. :-)
2924 [Main] libmondo-devices.c->mount_media#1383: mount_media() - media already mounted. Fair enough.
2925Restoring OS and data from CD/USB
2926Restoring from archives
2927 [Main] mondorestore.c->restore_all_tarballs_from_CD#2252: Insisting on 1st media, so that I can have a look at LAST-FILELIST-NUMBER
2928 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/mnt/cdrom/archives/THIS-CD-NUMBER)
2929 [Main] libmondo-devices.c->insist_on_this_cd_number#1522: Currently, we hold 0 but we want 1
2930running: umount -d /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2931--------------------------------start of output-----------------------------
2932--------------------------------end of output------------------------------
2933...ran just fine. :-)
2934 [Main] libmondo-devices.c->insist_on_this_cd_number#1526: Mounting next media 1
2935running: mount | grep -F /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2936--------------------------------start of output-----------------------------
2937--------------------------------end of output------------------------------
2938...ran with res=256
2939 [Main] libmondo-devices.c->mount_media#1451: (mount_media) --- command = mount /testwmedia-mup-2012-07-09-1.iso -t iso9660 -o loop,ro /mnt/cdrom
2940running: mount /testwmedia-mup-2012-07-09-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2941--------------------------------start of output-----------------------------
2942/testwmedia-mup-2012-07-09-1.iso: No such file or directory
2943--------------------------------end of output------------------------------
2944...ran with res=8192
2945 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
2946running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2947--------------------------------start of output-----------------------------
2948--------------------------------end of output------------------------------
2949...ran just fine. :-)
2950running: mount /testwmedia-mup-2012-07-09-1.iso -t iso9660 -o loop,ro /mnt/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2951--------------------------------start of output-----------------------------
2952/testwmedia-mup-2012-07-09-1.iso: No such file or directory
2953--------------------------------end of output------------------------------
2954...ran with res=8192
2955 [Main] libmondo-devices.c->mount_media#1457: Failed to mount device.
2956running: sync > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2957--------------------------------start of output-----------------------------
2958--------------------------------end of output------------------------------
2959...ran just fine. :-)
2960 [Main] libmondo-devices.c->mount_media#1464: Failed, despite 2 attempts
2961 [Main] libmondo-devices.c->insist_on_this_cd_number#1534: Insisting on ISO #1
2962 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
2963[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
2964 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null'
2965 [Main] libmondo-devices.c->eject_device#254: Ejecting /dev/cdrom
2966running: eject /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2967--------------------------------start of output-----------------------------
2968umount: can't umount /cdrom: Device or resource busy
2969eject: unmount of `/cdrom' failed
2970--------------------------------end of output------------------------------
2971...ran with res=256
2972Please insert ISO #1 and press Enter.
2973running: eject -t /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2974--------------------------------start of output-----------------------------
2975--------------------------------end of output------------------------------
2976...ran just fine. :-)
2977 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
2978[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
2979 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null'
2980 [Main] libmondo-devices.c->eject_device#254: Ejecting /dev/cdrom
2981running: eject /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2982--------------------------------start of output-----------------------------
2983umount: can't umount /cdrom: Device or resource busy
2984eject: unmount of `/cdrom' failed
2985--------------------------------end of output------------------------------
2986...ran with res=256
2987Please insert ISO #1 and press Enter.
2988running: eject -t /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2989--------------------------------start of output-----------------------------
2990--------------------------------end of output------------------------------
2991...ran just fine. :-)
2992 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
2993[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
2994 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null'
2995 [Main] libmondo-devices.c->eject_device#254: Ejecting /dev/cdrom
2996running: eject /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
2997--------------------------------start of output-----------------------------
2998umount: can't umount /cdrom: Device or resource busy
2999eject: unmount of `/cdrom' failed
3000--------------------------------end of output------------------------------
3001...ran with res=256
3002Please insert ISO #1 and press Enter.
3003running: eject -t /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3004--------------------------------start of output-----------------------------
3005--------------------------------end of output------------------------------
3006...ran just fine. :-)
3007 [Main] libmondo-files.c->last_line_of_file#508: Tring to get last line of nonexistent file (/cdrom/archives/THIS-CD-NUMBER)
3008[Main] libmondo-devices.c->is_this_device_mounted#1140: Is /mnt/cdrom mounted?
3009 [Main] libmondo-devices.c->is_this_device_mounted#1169: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null'
3010 [Main] libmondo-devices.c->eject_device#254: Ejecting /dev/cdrom
3011running: eject /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3012--------------------------------start of output-----------------------------
3013umount: can't umount /cdrom: Device or resource busy
3014eject: unmount of `/cdrom' failed
3015--------------------------------end of output------------------------------
3016...ran with res=256
3017Please insert ISO #1 and press Enter.
3018running: eject -t /dev/cdrom > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3019--------------------------------start of output-----------------------------
3020--------------------------------end of output------------------------------
3021...ran just fine. :-)
3022[Main] libmondo-devices.c->insist_on_this_cd_number#1560: Thankyou. Proceeding...
3023Restoring from ISO #1
3024No tarballs. Strange. Maybe you only backed up freakin' big files?
3025Reassembling large files
3026 [Main] libmondo-files.c->length_of_file#537: filename=/mnt/cdrom/archives/biggielist.txt
3027Unable to openin filename (No such file or directory)
3028[Main] mondorestore.c->restore_all_biggiefiles_from_CD#2113: OK, no biggielist; not restoring biggiefiles
3029 [Main] libmondo-files.c->length_of_file#537: filename=/etc/raidtab
3030Unable to openin filename (No such file or directory)
3031running: ps | grep " petris " | grep -v "grep" | awk '{print $1;}' > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3032--------------------------------start of output-----------------------------
3033--------------------------------end of output------------------------------
3034...ran just fine. :-)
3035running: kill `ps | grep " petris " | grep -v "grep" | awk '{print $1;}'` > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3036--------------------------------start of output-----------------------------
3037sh: you need to specify whom to kill
3038--------------------------------end of output------------------------------
3039...ran with res=256
3040 [Main] mondorestore.c->restore_everything#2757: restore_everything() --- leaving
3041running: tar cf - /dev | ( cd /mnt/RESTORING ; tar xf - ) > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3042--------------------------------start of output-----------------------------
3043--------------------------------end of output------------------------------
3044...ran just fine. :-)
3045 [Main] mondo-rstr-tools.c->run_boot_loader#1312: run_boot_loader: device='/dev/sda', name='GRUB'
3046[Main] mondo-rstr-tools.c->offer_to_make_initrd#1247: Launching shell for manual initrd recreation
3047You'll now be chrooted under your future / partition.
3048Go under /boot and rebuild your initrd with
3049mkinitrd -f -v initrd-2.x.y.img 2.x.y e.g.
3050Then type exit to finish.
3051Modifying initrd...
3052Done.
3053 [Main] libmondo-files.c->find_home_of_exe#363: find_home_of_exe() --- Could not find pico
3054 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found nano at /bin/nano
3055 [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe () --- Found nano at /bin/nano
3056running: which grub-MR > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3057--------------------------------start of output-----------------------------
3058/mondo/grub-MR
3059--------------------------------end of output------------------------------
3060...ran just fine. :-)
3061[Main] mondo-rstr-tools.c->run_grub#1427: Yay! grub-MR found...
3062[Main] mondo-rstr-tools.c->run_grub#1429: command = grub-MR /dev/sda /tmp/mountlist.txt
3063Modifying fstab, mtab, device.map and menu.lst/grub.cfg, and running GRUB...
3064The mountlist was changed. You will now edit fstab, mtab, device.map and menu.lst/grub.cfg in order to fix grub install
3065 [Main] mondo-rstr-tools.c->run_grub#1465: chroot /mnt/RESTORING nano /etc/fstab
3066 [Main] mondo-rstr-tools.c->run_grub#1467: chroot /mnt/RESTORING nano /etc/mtab
3067 [Main] mondo-rstr-tools.c->run_grub#1475: chroot /mnt/RESTORING nano /etc/mtab
3068 [Main] mondo-rstr-tools.c->run_grub#1481: chroot /mnt/RESTORING nano /etc/mtab
306902:17 stabgrub-me '/dev/sda' --- starting
307002:17 Looking for fstab. Please wait.
307102:17 Cannot find any folder which holds fstab _and_ inetd.conf
307202:17 GRUB not found.
307302:17 (stabgrub-me) Where's ? I cannot continue.
3074running: stabgrub-me /dev/sda > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3075--------------------------------start of output-----------------------------
3076Looking for fstab. Please wait.
3077Cannot find any folder which holds fstab _and_ inetd.conf
3078GRUB not found.
3079(stabgrub-me) Where's ? I cannot continue.
3080--------------------------------end of output------------------------------
3081...ran with res=256
3082GRUB installation failed. Please fix the conf files so that a manual install using 'grub-install' or similar command works. You are now chroot()'ed to your restored system. Please type 'exit' when you are done.
3083Thank you.
3084GRUB installation failed. You will now edit fstab, mtab, device.map and menu.lst/grub.cfg in order to fix grub install
3085 [Main] mondo-rstr-tools.c->run_grub#1465: chroot /mnt/RESTORING nano /etc/fstab
3086 [Main] mondo-rstr-tools.c->run_grub#1467: chroot /mnt/RESTORING nano /etc/mtab
3087 [Main] mondo-rstr-tools.c->run_grub#1475: chroot /mnt/RESTORING nano /etc/mtab
3088 [Main] mondo-rstr-tools.c->run_grub#1481: chroot /mnt/RESTORING nano /etc/mtab
308902:17 stabgrub-me '/dev/sda' --- starting
309002:17 Looking for fstab. Please wait.
309102:17 Cannot find any folder which holds fstab _and_ inetd.conf
309202:17 GRUB not found.
309302:17 (stabgrub-me) Where's ? I cannot continue.
3094running: stabgrub-me /dev/sda > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3095--------------------------------start of output-----------------------------
3096Looking for fstab. Please wait.
3097Cannot find any folder which holds fstab _and_ inetd.conf
3098GRUB not found.
3099(stabgrub-me) Where's ? I cannot continue.
3100--------------------------------end of output------------------------------
3101...ran with res=256
3102GRUB installation failed. Please fix the conf files so that a manual install using 'grub-install' or similar command works. You are now chroot()'ed to your restored system. Please type 'exit' when you are done.
3103Thank you.
3104GRUB installation failed. You will now edit fstab, mtab, device.map and menu.lst/grub.cfg in order to fix grub install
3105 [Main] mondo-rstr-tools.c->run_grub#1465: chroot /mnt/RESTORING nano /etc/fstab
3106 [Main] mondo-rstr-tools.c->run_grub#1467: chroot /mnt/RESTORING nano /etc/mtab
3107 [Main] mondo-rstr-tools.c->run_grub#1475: chroot /mnt/RESTORING nano /etc/mtab
3108 [Main] mondo-rstr-tools.c->run_grub#1481: chroot /mnt/RESTORING nano /etc/mtab
310902:17 stabgrub-me '/dev/sda' --- starting
311002:17 Looking for fstab. Please wait.
311102:17 Cannot find any folder which holds fstab _and_ inetd.conf
311202:17 GRUB not found.
311302:17 (stabgrub-me) Where's ? I cannot continue.
3114running: stabgrub-me /dev/sda > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3115--------------------------------start of output-----------------------------
3116Looking for fstab. Please wait.
3117Cannot find any folder which holds fstab _and_ inetd.conf
3118GRUB not found.
3119(stabgrub-me) Where's ? I cannot continue.
3120--------------------------------end of output------------------------------
3121...ran with res=256
3122GRUB installation failed. Please fix the conf files so that a manual install using 'grub-install' or similar command works. You are now chroot()'ed to your restored system. Please type 'exit' when you are done.
3123Thank you.
3124GRUB installation failed. You will now edit fstab, mtab, device.map and menu.lst/grub.cfg in order to fix grub install
3125 [Main] mondo-rstr-tools.c->run_grub#1465: chroot /mnt/RESTORING nano /etc/fstab
3126 [Main] mondo-rstr-tools.c->run_grub#1467: chroot /mnt/RESTORING nano /etc/mtab
3127 [Main] mondo-rstr-tools.c->run_grub#1475: chroot /mnt/RESTORING nano /etc/mtab
3128 [Main] mondo-rstr-tools.c->run_grub#1481: chroot /mnt/RESTORING nano /etc/mtab
312902:19 stabgrub-me '/dev/sda' --- starting
313002:19 Looking for fstab. Please wait.
313102:19 Cannot find any folder which holds fstab _and_ inetd.conf
313202:19 GRUB not found.
313302:19 (stabgrub-me) Where's ? I cannot continue.
3134running: stabgrub-me /dev/sda > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3135--------------------------------start of output-----------------------------
3136Looking for fstab. Please wait.
3137Cannot find any folder which holds fstab _and_ inetd.conf
3138GRUB not found.
3139(stabgrub-me) Where's ? I cannot continue.
3140--------------------------------end of output------------------------------
3141...ran with res=256
3142GRUB installation failed. Please fix the conf files so that a manual install using 'grub-install' or similar command works. You are now chroot()'ed to your restored system. Please type 'exit' when you are done.
3143Thank you.
3144GRUB installation failed. You will now edit fstab, mtab, device.map and menu.lst/grub.cfg in order to fix grub install
3145 [Main] mondo-rstr-tools.c->run_grub#1465: chroot /mnt/RESTORING nano /etc/fstab
3146 [Main] mondo-rstr-tools.c->run_grub#1467: chroot /mnt/RESTORING nano /etc/mtab
3147 [Main] mondo-rstr-tools.c->run_grub#1475: chroot /mnt/RESTORING nano /etc/mtab
3148 [Main] mondo-rstr-tools.c->run_grub#1481: chroot /mnt/RESTORING nano /etc/mtab
314902:20 stabgrub-me '/dev/sda1' --- starting
315002:20 Looking for fstab. Please wait.
315102:20 Cannot find any folder which holds fstab _and_ inetd.conf
315202:20 GRUB not found.
315302:20 (stabgrub-me) Where's ? I cannot continue.
3154running: stabgrub-me /dev/sda1 > //mondo.tmp.rxIXom/mondo-run-prog-thing.tmp 2> //mondo.tmp.rxIXom/mondo-run-prog-thing.err
3155--------------------------------start of output-----------------------------
3156Looking for fstab. Please wait.
3157Cannot find any folder which holds fstab _and_ inetd.conf
3158GRUB not found.
3159(stabgrub-me) Where's ? I cannot continue.
3160--------------------------------end of output------------------------------
3161...ran with res=256
3162GRUB installation failed. Please fix the conf files so that a manual install using 'grub-install' or similar command works. You are now chroot()'ed to your restored system. Please type 'exit' when you are done.
3163Thank you.