1 | 10:55 Preparing udev environment...
|
---|
2 | 10:55 udev started manually
|
---|
3 | 10:55 Discovering with udevadm
|
---|
4 | 10:55 Extracted additional /dev entries OK.
|
---|
5 | 10:55 Redirecting serial to /dev/tty
|
---|
6 | 10:56 Trying 'mount /dev/shm -t tmpfs -o size=256m'
|
---|
7 | 10:56 Great. Pivot succeeded w/ size=256m
|
---|
8 | 10:56 Successfully mounted dynamic /tmp ramdisk
|
---|
9 | 10:56 find-and-mount-cdrom --- starting
|
---|
10 | 10:56 Trying /dev/hda
|
---|
11 | 10:56 It's not in /dev/hda; I'll keep looking
|
---|
12 | 10:56 Trying /dev/hdb
|
---|
13 | 10:56 It's not in /dev/hdb; I'll keep looking
|
---|
14 | 10:56 Trying /dev/hdc
|
---|
15 | 10:56 It's not in /dev/hdc; I'll keep looking
|
---|
16 | 10:56 Trying /dev/hdd
|
---|
17 | 10:56 It's not in /dev/hdd; I'll keep looking
|
---|
18 | 10:56 Trying /dev/hde
|
---|
19 | 10:56 It's not in /dev/hde; I'll keep looking
|
---|
20 | 10:56 Trying /dev/hdf
|
---|
21 | 10:56 It's not in /dev/hdf; I'll keep looking
|
---|
22 | 10:56 Trying /dev/hdg
|
---|
23 | 10:56 It's not in /dev/hdg; I'll keep looking
|
---|
24 | 10:56 Trying /dev/hdh
|
---|
25 | 10:56 It's not in /dev/hdh; I'll keep looking
|
---|
26 | 10:56 Trying /dev/scd0
|
---|
27 | 10:56 /dev/scd0 has a CD-ROM in it
|
---|
28 | 10:56 CD-ROM found at /dev/scd0
|
---|
29 | 10:56 /dev/scd0 is where the Mondo CD lives.
|
---|
30 | 10:56 CD-ROM found and mounted at /dev/scd0
|
---|
31 | 10:56 find-and-mount-cdrom --- leaving (0)
|
---|
32 | 10:56 OK, I am running on a CD-ROM. Good.
|
---|
33 | 10:56 Installing additional tools ...
|
---|
34 | 10:56 Starting install-additional-tools
|
---|
35 | 10:56 PLEASE WAIT. Untarring data content
|
---|
36 | 10:56 Populating / with tar file content...
|
---|
37 | 10:56 Installing and removing BOOTLOADER.DEVICE
|
---|
38 | BOOTLOADER.MBR
|
---|
39 | BOOTLOADER.NAME
|
---|
40 | BOOTLOADER.VER
|
---|
41 | FILES-IN-FILELIST
|
---|
42 | LAST-FILELIST-NUMBER
|
---|
43 | bin
|
---|
44 | dev
|
---|
45 | etc
|
---|
46 | lib
|
---|
47 | mondo
|
---|
48 | sbin
|
---|
49 | tmp
|
---|
50 | usr
|
---|
51 | var
|
---|
52 | 10:56 Done.
|
---|
53 | 10:56 Exiting install-additional-tools
|
---|
54 | 10:56 klogd and syslogd have been started.
|
---|
55 | 10:56 Using /etc/console-setup/cached.kmap.gz keyboard map.
|
---|
56 | 10:56 RAID controller(s) detected. Pausing 10 seconds to let them warm up.
|
---|
57 | 10:56 Warning: Neither 'raidstart' nor 'mdrun''found. RAID devices may not have started.
|
---|
58 | 10:56 LVM's have been started.
|
---|
59 | 10:57 OK, we've found /mnt/cdrom/archives/*; great.
|
---|
60 | 10:57 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs
|
---|
61 | 10:57 Done re-jigging. Yay.
|
---|
62 | 10:57 init (from mindi v2.1.420130223004458-r3083)
|
---|
63 | 10:57 /proc/cmdline is:
|
---|
64 | 10:57 ----------
|
---|
65 | initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=155648 interactive devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz
|
---|
66 | 10:57 ----------
|
---|
67 | 10:57 df result:
|
---|
68 | 10:57 ----------
|
---|
69 | Filesystem 1K-blocks Used Available Use% Mounted on
|
---|
70 | none 5120 172 4948 4% /dev
|
---|
71 | none 241104 0 241104 0% /dev/shm
|
---|
72 | /dev/shm 262144 488 261656 1% /tmp
|
---|
73 | /dev/sr0 624842 624842 0 100% /mnt/cdrom
|
---|
74 | 10:57 -------------
|
---|
75 | 10:57 mount result:
|
---|
76 | 10:57 -------------
|
---|
77 | rootfs on / type rootfs (rw,relatime)
|
---|
78 | /proc on /proc type proc (rw,relatime)
|
---|
79 | /sys on /sys type sysfs (rw,relatime)
|
---|
80 | none on /dev type tmpfs (rw,relatime,size=5120k,mode=755)
|
---|
81 | none on /dev/pts type devpts (rw,relatime,mode=620,ptmxmode=000)
|
---|
82 | none on /dev/shm type tmpfs (rw,relatime)
|
---|
83 | /dev/shm on /tmp type tmpfs (rw,relatime,size=262144k)
|
---|
84 | /dev/sr0 on /mnt/cdrom type iso9660 (ro,relatime)
|
---|
85 | 10:57 -------------
|
---|
86 | 10:57 lsmod result:
|
---|
87 | 10:57 -------------
|
---|
88 | Module Size Used by
|
---|
89 | paride 3735 0
|
---|
90 | brd 2984 0
|
---|
91 | psmouse 44837 0
|
---|
92 | ns558 1599 0
|
---|
93 | gameport 6061 2 ns558
|
---|
94 | pcspkr 1207 0
|
---|
95 | serio_raw 2916 0
|
---|
96 | ipg 11873 0
|
---|
97 | ppa 6456 0
|
---|
98 | imm 6899 0
|
---|
99 | cpufreq_conservative 4018 0
|
---|
100 | cpufreq_powersave 602 0
|
---|
101 | cpufreq_userspace 1480 0
|
---|
102 | cpufreq_stats 1997 0
|
---|
103 | shpchp 21200 0
|
---|
104 | pci_hotplug 18545 1 shpchp
|
---|
105 | parport_pc 15799 0
|
---|
106 | parport 22554 4 paride,ppa,imm,parport_pc
|
---|
107 | thermal 9206 0
|
---|
108 | evdev 5609 0
|
---|
109 | button 3598 0
|
---|
110 | processor 26327 0
|
---|
111 | thermal_sys 9378 2 thermal,processor
|
---|
112 | async_pq 2643 0
|
---|
113 | raid6_pq 77468 1 async_pq
|
---|
114 | async_xor 1954 1 async_pq
|
---|
115 | xor 12418 1 async_xor
|
---|
116 | async_memcpy 838 0
|
---|
117 | async_tx 1326 3 async_pq,async_xor,async_memcpy
|
---|
118 | linear 3075 0
|
---|
119 | dm_round_robin 1724 0
|
---|
120 | dm_multipath 11500 1 dm_round_robin
|
---|
121 | multipath 4987 0
|
---|
122 | dm_zero 775 0
|
---|
123 | raid1 16375 0
|
---|
124 | raid0 5601 0
|
---|
125 | dm_mirror 9679 0
|
---|
126 | dm_region_hash 5640 1 dm_mirror
|
---|
127 | dm_log 6369 2 dm_mirror,dm_region_hash
|
---|
128 | dm_snapshot 17969 0
|
---|
129 | dm_mod 46326 5 dm_multipath,dm_zero,dm_mirror,dm_log,dm_snapshot
|
---|
130 | raid10 16733 0
|
---|
131 | md_mod 67429 5 linear,multipath,raid1,raid0,raid10
|
---|
132 | msdos 5118 0
|
---|
133 | btrfs 367014 0
|
---|
134 | nfsd 193919 0
|
---|
135 | reiserfs 176166 0
|
---|
136 | jfs 134656 0
|
---|
137 | ext3 94444 0
|
---|
138 | ext2 46245 0
|
---|
139 | jbd 32401 1 ext3
|
---|
140 | xfs 415709 0
|
---|
141 | minix 17814 0
|
---|
142 | ocfs2_dlm 157108 0
|
---|
143 | ocfs2_nodemanager 125027 1 ocfs2_dlm
|
---|
144 | configfs 15888 2 ocfs2_nodemanager
|
---|
145 | ext4 257096 0
|
---|
146 | mbcache 3762 3 ext3,ext2,ext4
|
---|
147 | jbd2 56251 1 ext4
|
---|
148 | crc16 1027 1 ext4
|
---|
149 | zlib_deflate 15822 1 btrfs
|
---|
150 | snd 34423 0
|
---|
151 | soundcore 3450 1 snd
|
---|
152 | ac97_bus 710 0
|
---|
153 | ahci 27806 0
|
---|
154 | ata_generic 2247 0
|
---|
155 | ata_piix 17736 0
|
---|
156 | pata_amd 6625 0
|
---|
157 | pata_atiixp 2541 0
|
---|
158 | pata_jmicron 1452 0
|
---|
159 | pata_marvell 1701 0
|
---|
160 | pata_serverworks 3969 0
|
---|
161 | pata_sil680 3237 0
|
---|
162 | pata_sis 6551 1
|
---|
163 | pata_via 5701 0
|
---|
164 | sata_nv 15398 0
|
---|
165 | sata_promise 7357 0
|
---|
166 | sata_svw 2924 0
|
---|
167 | sata_via 5608 0
|
---|
168 | libata 115869 15 ahci,ata_generic,ata_piix,pata_amd,pata_atiixp,pata_jmicron,pata_marvell,pata_serverworks,pata_sil680,pata_sis,pata_via,sata_nv,sata_promise,sata_svw,sata_via
|
---|
169 | cciss 76751 0
|
---|
170 | floppy 40923 0
|
---|
171 | loop 9769 0
|
---|
172 | virtio_blk 3586 0
|
---|
173 | edd 5156 0
|
---|
174 | ide_cd_mod 21080 0
|
---|
175 | ide_cs 6220 0
|
---|
176 | ide_gd_mod 17163 0
|
---|
177 | ide_generic 801 0 [permanent]
|
---|
178 | ide_tape 12923 0
|
---|
179 | ide_core 59614 5 ide_cd_mod,ide_cs,ide_gd_mod,ide_generic,ide_tape
|
---|
180 | ff_memless 3008 0
|
---|
181 | mptctl 17941 0
|
---|
182 | mptfc 8226 0
|
---|
183 | mptsas 26241 0
|
---|
184 | mptspi 9609 0
|
---|
185 | mptscsih 14196 3 mptfc,mptsas,mptspi
|
---|
186 | mptbase 42996 5 mptctl,mptfc,mptsas,mptspi,mptscsih
|
---|
187 | i2o_block 5529 0
|
---|
188 | i2o_core 24468 1 i2o_block
|
---|
189 | 3c59x 25036 0
|
---|
190 | 8139cp 13421 0
|
---|
191 | 8139too 14949 0
|
---|
192 | be2net 26223 0
|
---|
193 | bnx2 51821 0
|
---|
194 | bnx2x 177043 0
|
---|
195 | e1000 77317 0
|
---|
196 | e1000e 110350 0
|
---|
197 | e100 22317 0
|
---|
198 | forcedeth 40785 0
|
---|
199 | igb 81876 0
|
---|
200 | dca 2937 1 igb
|
---|
201 | ne2k_pci 4971 0
|
---|
202 | 8390 5544 1 ne2k_pci
|
---|
203 | pcnet32 22226 0
|
---|
204 | r8169 31337 0
|
---|
205 | mii 2714 7 ipg,3c59x,8139cp,8139too,e100,pcnet32,r8169
|
---|
206 | tg3 95865 0
|
---|
207 | libphy 11638 1 tg3
|
---|
208 | virtio_net 8658 0
|
---|
209 | vmxnet3 20832 0
|
---|
210 | pcmcia 16194 1 ide_cs
|
---|
211 | pcmcia_core 20450 1 pcmcia
|
---|
212 | 3w_9xxx 24100 0
|
---|
213 | 3w_xxxx 18497 0
|
---|
214 | aacraid 55214 0
|
---|
215 | advansys 48207 0
|
---|
216 | aic79xx 112172 0
|
---|
217 | aic7xxx 95151 0
|
---|
218 | arcmsr 16141 0
|
---|
219 | atp870u 22849 0
|
---|
220 | be2iscsi 31322 0
|
---|
221 | bnx2i 25485 0
|
---|
222 | cnic 17276 1 bnx2i
|
---|
223 | BusLogic 17136 0
|
---|
224 | cxgb3i 25910 0
|
---|
225 | cxgb3 105300 1 cxgb3i
|
---|
226 | mdio 2524 2 bnx2x,cxgb3
|
---|
227 | dc395x 25499 0
|
---|
228 | scsi_dh_alua 5568 0
|
---|
229 | scsi_dh_emc 5627 0
|
---|
230 | scsi_dh 3584 3 dm_multipath,scsi_dh_alua,scsi_dh_emc
|
---|
231 | dmx3191d 7749 0
|
---|
232 | gdth 70254 0
|
---|
233 | hpsa 34307 0
|
---|
234 | initio 13241 0
|
---|
235 | iscsi_tcp 6685 0
|
---|
236 | libiscsi_tcp 9314 2 cxgb3i,iscsi_tcp
|
---|
237 | libiscsi 24462 5 be2iscsi,bnx2i,cxgb3i,iscsi_tcp,libiscsi_tcp
|
---|
238 | megaraid 26715 0
|
---|
239 | megaraid_mbox 20850 0
|
---|
240 | megaraid_mm 5387 1 megaraid_mbox
|
---|
241 | megaraid_sas 48871 0
|
---|
242 | nsp32 17107 0
|
---|
243 | osst 40557 0
|
---|
244 | qla1280 16861 0
|
---|
245 | qla2xxx 181411 0
|
---|
246 | qlogicfas408 3661 0
|
---|
247 | scsi_transport_fc 28459 2 mptfc,qla2xxx
|
---|
248 | scsi_tgt 6842 1 scsi_transport_fc
|
---|
249 | scsi_transport_iscsi 19900 5 be2iscsi,bnx2i,cxgb3i,iscsi_tcp,libiscsi
|
---|
250 | scsi_transport_sas 15169 1 mptsas
|
---|
251 | sd_mod 26013 0
|
---|
252 | sg 19937 0
|
---|
253 | sr_mod 10770 1
|
---|
254 | cdrom 26435 2 ide_cd_mod,sr_mod
|
---|
255 | st 26948 0
|
---|
256 | sym53c8xx 58060 0
|
---|
257 | scsi_transport_spi 14866 5 mptspi,aic79xx,aic7xxx,dmx3191d,sym53c8xx
|
---|
258 | tmscsim 14744 0
|
---|
259 | uio 5501 1 cnic
|
---|
260 | ehci_hcd 28689 0
|
---|
261 | ohci_hcd 16999 0
|
---|
262 | uhci_hcd 16057 0
|
---|
263 | xhci 29541 0
|
---|
264 | cp210x 9679 0
|
---|
265 | usbserial 22108 1 cp210x
|
---|
266 | ums_cypress 1741 0
|
---|
267 | usb_storage 31033 1 ums_cypress
|
---|
268 | scsi_mod 105101 51 ppa,imm,libata,cciss,mptctl,mptfc,mptsas,mptspi,mptscsih,3w_9xxx,3w_xxxx,aacraid,advansys,aic79xx,aic7xxx,arcmsr,atp870u,be2iscsi,bnx2i,BusLogic,cxgb3i,dc395x,scsi_dh_alua,scsi_dh_emc,scsi_dh,dmx3191d,gdth,hpsa,initio,iscsi_tcp,libiscsi,megaraid,megaraid_mbox,megaraid_sas,nsp32,osst,qla1280,qla2xxx,scsi_transport_fc,scsi_tgt,scsi_transport_iscsi,scsi_transport_sas,sd_mod,sg,sr_mod,st,sym53c8xx,scsi_transport_spi,tmscsim,ums_cypress,usb_storage
|
---|
269 | virtio_balloon 2285 0
|
---|
270 | virtio_pci 4351 0
|
---|
271 | exportfs 2618 2 nfsd,xfs
|
---|
272 | vfat 6570 0
|
---|
273 | fat 34912 2 msdos,vfat
|
---|
274 | fuse 44328 0
|
---|
275 | isofs 24608 1
|
---|
276 | nfs 207298 0
|
---|
277 | lockd 49449 2 nfsd,nfs
|
---|
278 | fscache 24662 1 nfs
|
---|
279 | nfs_acl 1695 2 nfsd,nfs
|
---|
280 | nls_cp437 4489 0
|
---|
281 | nls_iso8859_1 2961 0
|
---|
282 | nls_utf8 908 1
|
---|
283 | crc_t10dif 1012 1 sd_mod
|
---|
284 | crc32c 2172 1
|
---|
285 | libcrc32c 762 2 btrfs,bnx2x
|
---|
286 | auth_rpcgss 25296 2 nfsd,nfs
|
---|
287 | sunrpc 134903 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
|
---|
288 | usbhid 28016 0
|
---|
289 | hid 50909 1 usbhid
|
---|
290 | usbcore 99482 10 ehci_hcd,ohci_hcd,uhci_hcd,xhci,cp210x,usbserial,ums_cypress,usb_storage,usbhid
|
---|
291 | nls_base 4541 8 jfs,vfat,fat,isofs,nls_cp437,nls_iso8859_1,nls_utf8,usbcore
|
---|
292 | 10:57 -------------
|
---|
293 | 10:57 dmesg result:
|
---|
294 | 10:57 -------------
|
---|
295 | [ 0.000000] Initializing cgroup subsys cpuset
|
---|
296 | [ 0.000000] Initializing cgroup subsys cpu
|
---|
297 | [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Feb 15 15:48:27 UTC 2013
|
---|
298 | [ 0.000000] KERNEL supported cpus:
|
---|
299 | [ 0.000000] Intel GenuineIntel
|
---|
300 | [ 0.000000] AMD AuthenticAMD
|
---|
301 | [ 0.000000] NSC Geode by NSC
|
---|
302 | [ 0.000000] Cyrix CyrixInstead
|
---|
303 | [ 0.000000] Centaur CentaurHauls
|
---|
304 | [ 0.000000] Transmeta GenuineTMx86
|
---|
305 | [ 0.000000] Transmeta TransmetaCPU
|
---|
306 | [ 0.000000] UMC UMC UMC UMC
|
---|
307 | [ 0.000000] BIOS-provided physical RAM map:
|
---|
308 | [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
|
---|
309 | [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
|
---|
310 | [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
|
---|
311 | [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dffc000 (usable)
|
---|
312 | [ 0.000000] BIOS-e820: 000000001dffc000 - 000000001dfff000 (ACPI data)
|
---|
313 | [ 0.000000] BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
|
---|
314 | [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
|
---|
315 | [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
|
---|
316 | [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
|
---|
317 | [ 0.000000] DMI 2.3 present.
|
---|
318 | [ 0.000000] last_pfn = 0x1dffc max_arch_pfn = 0x100000
|
---|
319 | [ 0.000000] MTRR default type: uncachable
|
---|
320 | [ 0.000000] MTRR fixed ranges enabled:
|
---|
321 | [ 0.000000] 00000-9FFFF write-back
|
---|
322 | [ 0.000000] A0000-BFFFF uncachable
|
---|
323 | [ 0.000000] C0000-C7FFF write-protect
|
---|
324 | [ 0.000000] C8000-EFFFF uncachable
|
---|
325 | [ 0.000000] F0000-FFFFF write-protect
|
---|
326 | [ 0.000000] MTRR variable ranges enabled:
|
---|
327 | [ 0.000000] 0 base 000000000 mask FE0000000 write-back
|
---|
328 | [ 0.000000] 1 base 01E000000 mask FFE000000 uncachable
|
---|
329 | [ 0.000000] 2 base 0E8000000 mask FFC000000 write-combining
|
---|
330 | [ 0.000000] 3 disabled
|
---|
331 | [ 0.000000] 4 disabled
|
---|
332 | [ 0.000000] 5 disabled
|
---|
333 | [ 0.000000] 6 disabled
|
---|
334 | [ 0.000000] 7 disabled
|
---|
335 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
|
---|
336 | [ 0.000000] initial memory mapped : 0 - 01800000
|
---|
337 | [ 0.000000] init_memory_mapping: 0000000000000000-000000001dffc000
|
---|
338 | [ 0.000000] 0000000000 - 0000400000 page 4k
|
---|
339 | [ 0.000000] 0000400000 - 001dc00000 page 2M
|
---|
340 | [ 0.000000] 001dc00000 - 001dffc000 page 4k
|
---|
341 | [ 0.000000] kernel direct mapping tables up to 1dffc000 @ 7000-d000
|
---|
342 | [ 0.000000] RAMDISK: 1d857000 - 1dfdaec9
|
---|
343 | [ 0.000000] ACPI: RSDP 000f6150 00014 (v00 ASUS )
|
---|
344 | [ 0.000000] ACPI: RSDT 1dffc000 00030 (v01 ASUS P4S333VM 42302E31 MSFT 31313031)
|
---|
345 | [ 0.000000] ACPI: FACP 1dffc100 00074 (v01 ASUS P4S333VM 42302E31 MSFT 31313031)
|
---|
346 | [ 0.000000] ACPI: DSDT 1dffc180 023B8 (v01 ASUS P4S333VM 00001000 MSFT 0100000B)
|
---|
347 | [ 0.000000] ACPI: FACS 1dfff000 00040
|
---|
348 | [ 0.000000] ACPI: BOOT 1dffc040 00028 (v01 ASUS P4S333VM 42302E31 MSFT 31313031)
|
---|
349 | [ 0.000000] ACPI: APIC 1dffc080 0005A (v01 ASUS P4S333VM 42302E31 MSFT 31313031)
|
---|
350 | [ 0.000000] ACPI: Local APIC address 0xfee00000
|
---|
351 | [ 0.000000] 0MB HIGHMEM available.
|
---|
352 | [ 0.000000] 479MB LOWMEM available.
|
---|
353 | [ 0.000000] mapped low ram: 0 - 1dffc000
|
---|
354 | [ 0.000000] low ram: 0 - 1dffc000
|
---|
355 | [ 0.000000] node 0 low ram: 00000000 - 1dffc000
|
---|
356 | [ 0.000000] node 0 bootmap 00002000 - 00005c00
|
---|
357 | [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dffc000]
|
---|
358 | [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
|
---|
359 | [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
|
---|
360 | [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
|
---|
361 | [ 0.000000] #3 [0001000000 - 00014ced2c] TEXT DATA BSS ==> [0001000000 - 00014ced2c]
|
---|
362 | [ 0.000000] #4 [001d857000 - 001dfdaec9] RAMDISK ==> [001d857000 - 001dfdaec9]
|
---|
363 | [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
|
---|
364 | [ 0.000000] #6 [00014cf000 - 00014d5158] BRK ==> [00014cf000 - 00014d5158]
|
---|
365 | [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
|
---|
366 | [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
|
---|
367 | [ 0.000000] Zone PFN ranges:
|
---|
368 | [ 0.000000] DMA 0x00000000 -> 0x00001000
|
---|
369 | [ 0.000000] Normal 0x00001000 -> 0x0001dffc
|
---|
370 | [ 0.000000] HighMem 0x0001dffc -> 0x0001dffc
|
---|
371 | [ 0.000000] Movable zone start PFN for each node
|
---|
372 | [ 0.000000] early_node_map[2] active PFN ranges
|
---|
373 | [ 0.000000] 0: 0x00000000 -> 0x0000009f
|
---|
374 | [ 0.000000] 0: 0x00000100 -> 0x0001dffc
|
---|
375 | [ 0.000000] On node 0 totalpages: 122779
|
---|
376 | [ 0.000000] free_area_init_node: node 0, pgdat c13b6900, node_mem_map c14d7000
|
---|
377 | [ 0.000000] DMA zone: 32 pages used for memmap
|
---|
378 | [ 0.000000] DMA zone: 0 pages reserved
|
---|
379 | [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
|
---|
380 | [ 0.000000] Normal zone: 928 pages used for memmap
|
---|
381 | [ 0.000000] Normal zone: 117852 pages, LIFO batch:31
|
---|
382 | [ 0.000000] Using APIC driver default
|
---|
383 | [ 0.000000] ACPI: PM-Timer IO Port: 0xe408
|
---|
384 | [ 0.000000] ACPI: Local APIC address 0xfee00000
|
---|
385 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
|
---|
386 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
|
---|
387 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
|
---|
388 | [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
|
---|
389 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
|
---|
390 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
|
---|
391 | [ 0.000000] ACPI: IRQ0 used by override.
|
---|
392 | [ 0.000000] ACPI: IRQ2 used by override.
|
---|
393 | [ 0.000000] Using ACPI (MADT) for SMP configuration information
|
---|
394 | [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
|
---|
395 | [ 0.000000] nr_irqs_gsi: 24
|
---|
396 | [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
|
---|
397 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
|
---|
398 | [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
|
---|
399 | [ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e0c00000)
|
---|
400 | [ 0.000000] Booting paravirtualized kernel on bare hardware
|
---|
401 | [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
|
---|
402 | [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34360 r0 d22984 u4194304
|
---|
403 | [ 0.000000] pcpu-alloc: s34360 r0 d22984 u4194304 alloc=1*4194304
|
---|
404 | [ 0.000000] pcpu-alloc: [0] 0
|
---|
405 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121819
|
---|
406 | [ 0.000000] Kernel command line: initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=155648 interactive devfs=nomount noresume selinux=0 barrier=off udevtimeout=10 BOOT_IMAGE=/vmlinuz
|
---|
407 | [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
|
---|
408 | [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
|
---|
409 | [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
|
---|
410 | [ 0.000000] Enabling fast FPU save and restore... done.
|
---|
411 | [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
|
---|
412 | [ 0.000000] Initializing CPU#0
|
---|
413 | [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
|
---|
414 | [ 0.000000] Memory: 473816k/491504k available (2509k kernel code, 16992k reserved, 1331k data, 380k init, 0k highmem)
|
---|
415 | [ 0.000000] virtual kernel memory layout:
|
---|
416 | [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
|
---|
417 | [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
|
---|
418 | [ 0.000000] vmalloc : 0xde7fc000 - 0xff3fe000 ( 524 MB)
|
---|
419 | [ 0.000000] lowmem : 0xc0000000 - 0xddffc000 ( 479 MB)
|
---|
420 | [ 0.000000] .init : 0xc13c1000 - 0xc1420000 ( 380 kB)
|
---|
421 | [ 0.000000] .data : 0xc1273513 - 0xc13c0504 (1331 kB)
|
---|
422 | [ 0.000000] .text : 0xc1000000 - 0xc1273513 (2509 kB)
|
---|
423 | [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
|
---|
424 | [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
---|
425 | [ 0.000000] Hierarchical RCU implementation.
|
---|
426 | [ 0.000000] NR_IRQS:1280
|
---|
427 | [ 0.000000] Console: colour VGA+ 80x25
|
---|
428 | [ 0.000000] console [tty0] enabled
|
---|
429 | [ 0.000000] Fast TSC calibration using PIT
|
---|
430 | [ 0.000000] Detected 1715.460 MHz processor.
|
---|
431 | [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3430.92 BogoMIPS (lpj=6861840)
|
---|
432 | [ 0.008168] Security Framework initialized
|
---|
433 | [ 0.008235] SELinux: Disabled at boot.
|
---|
434 | [ 0.008306] Mount-cache hash table entries: 512
|
---|
435 | [ 0.008632] Initializing cgroup subsys ns
|
---|
436 | [ 0.008705] Initializing cgroup subsys cpuacct
|
---|
437 | [ 0.008768] Initializing cgroup subsys devices
|
---|
438 | [ 0.008827] Initializing cgroup subsys freezer
|
---|
439 | [ 0.008886] Initializing cgroup subsys net_cls
|
---|
440 | [ 0.009010] CPU: Trace cache: 12K uops, L1 D cache: 8K
|
---|
441 | [ 0.009105] CPU: L2 cache: 128K
|
---|
442 | [ 0.009160] CPU: Hyper-Threading is disabled
|
---|
443 | [ 0.009224] mce: CPU supports 4 MCE banks
|
---|
444 | [ 0.009298] CPU0: Thermal monitoring enabled (TM1)
|
---|
445 | [ 0.009379] Performance Events: no PMU driver, software events only.
|
---|
446 | [ 0.009485] Checking 'hlt' instruction... OK.
|
---|
447 | [ 0.024766] SMP alternatives: switching to UP code
|
---|
448 | [ 0.034839] Freeing SMP alternatives: 13k freed
|
---|
449 | [ 0.034929] ACPI: Core revision 20090903
|
---|
450 | [ 0.040699] Enabling APIC mode: Flat. Using 1 I/O APICs
|
---|
451 | [ 0.041227] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
|
---|
452 | [ 0.080997] CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
|
---|
453 | [ 0.084001] Brought up 1 CPUs
|
---|
454 | [ 0.084001] Total of 1 processors activated (3430.92 BogoMIPS).
|
---|
455 | [ 0.084001] CPU0 attaching NULL sched-domain.
|
---|
456 | [ 0.084001] devtmpfs: initialized
|
---|
457 | [ 0.084001] regulator: core version 0.5
|
---|
458 | [ 0.084001] NET: Registered protocol family 16
|
---|
459 | [ 0.084001] ACPI: bus type pci registered
|
---|
460 | [ 0.085303] PCI: PCI BIOS revision 2.10 entry at 0xf13c0, last bus=1
|
---|
461 | [ 0.085373] PCI: Using configuration type 1 for base access
|
---|
462 | [ 0.086357] bio: create slab <bio-0> at 0
|
---|
463 | [ 0.087291] ACPI: EC: Look up EC in DSDT
|
---|
464 | [ 0.094593] ACPI: Interpreter enabled
|
---|
465 | [ 0.094666] ACPI: (supports S0 S1 S3 S4 S5)
|
---|
466 | [ 0.094931] ACPI: Using IOAPIC for interrupt routing
|
---|
467 | [ 0.113570] ACPI: No dock devices found.
|
---|
468 | [ 0.113916] ACPI: PCI Root Bridge [PCI0] (0000:00)
|
---|
469 | [ 0.114097] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
|
---|
470 | [ 0.114314] pci 0000:00:02.0: Enabling SiS 96x SMBus
|
---|
471 | [ 0.114443] pci 0000:00:02.1: reg 20 io port: [0xe600-0xe61f]
|
---|
472 | [ 0.114502] pci 0000:00:02.2: reg 10 32bit mmio: [0xe7000000-0xe7000fff]
|
---|
473 | [ 0.114586] pci 0000:00:02.3: reg 10 32bit mmio: [0xe6800000-0xe6800fff]
|
---|
474 | [ 0.114707] pci 0000:00:02.5: reg 20 io port: [0xb800-0xb80f]
|
---|
475 | [ 0.114784] pci 0000:00:02.7: reg 10 io port: [0xa800-0xa8ff]
|
---|
476 | [ 0.114796] pci 0000:00:02.7: reg 14 io port: [0xa400-0xa47f]
|
---|
477 | [ 0.114871] pci 0000:00:02.7: PME# supported from D3hot D3cold
|
---|
478 | [ 0.114939] pci 0000:00:02.7: PME# disabled
|
---|
479 | [ 0.115091] pci 0000:00:0e.0: reg 20 io port: [0x9800-0x981f]
|
---|
480 | [ 0.115145] pci 0000:00:0e.0: supports D1 D2
|
---|
481 | [ 0.115149] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot
|
---|
482 | [ 0.115214] pci 0000:00:0e.0: PME# disabled
|
---|
483 | [ 0.115344] pci 0000:00:0e.1: reg 20 io port: [0x9400-0x941f]
|
---|
484 | [ 0.115398] pci 0000:00:0e.1: supports D1 D2
|
---|
485 | [ 0.115402] pci 0000:00:0e.1: PME# supported from D0 D1 D2 D3hot
|
---|
486 | [ 0.115467] pci 0000:00:0e.1: PME# disabled
|
---|
487 | [ 0.115572] pci 0000:00:0e.2: reg 10 32bit mmio: [0xe5800000-0xe58000ff]
|
---|
488 | [ 0.115651] pci 0000:00:0e.2: supports D1 D2
|
---|
489 | [ 0.115656] pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot
|
---|
490 | [ 0.115721] pci 0000:00:0e.2: PME# disabled
|
---|
491 | [ 0.115836] pci 0000:00:0f.0: reg 10 io port: [0x9000-0x90ff]
|
---|
492 | [ 0.115849] pci 0000:00:0f.0: reg 14 32bit mmio: [0xe5000000-0xe50000ff]
|
---|
493 | [ 0.115887] pci 0000:00:0f.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
|
---|
494 | [ 0.115928] pci 0000:00:0f.0: supports D1 D2
|
---|
495 | [ 0.115933] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
|
---|
496 | [ 0.116019] pci 0000:00:0f.0: PME# disabled
|
---|
497 | [ 0.116173] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
|
---|
498 | [ 0.116184] pci 0000:01:00.0: reg 14 32bit mmio: [0xe7800000-0xe781ffff]
|
---|
499 | [ 0.116194] pci 0000:01:00.0: reg 18 io port: [0xd800-0xd87f]
|
---|
500 | [ 0.116255] pci 0000:01:00.0: supports D1 D2
|
---|
501 | [ 0.116318] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
|
---|
502 | [ 0.116326] pci 0000:00:01.0: bridge 32bit mmio: [0xe7800000-0xe7ffffff]
|
---|
503 | [ 0.116335] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xfebfffff]
|
---|
504 | [ 0.116350] pci_bus 0000:00: on NUMA node 0
|
---|
505 | [ 0.116368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
|
---|
506 | [ 0.116658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
|
---|
507 | [ 0.172523] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
|
---|
508 | [ 0.173209] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
---|
509 | [ 0.173934] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
---|
510 | [ 0.174655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
---|
511 | [ 0.175400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
|
---|
512 | [ 0.176147] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
|
---|
513 | [ 0.176847] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
---|
514 | [ 0.177597] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
|
---|
515 | [ 0.178388] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
|
---|
516 | [ 0.178477] vgaarb: loaded
|
---|
517 | [ 0.178745] PCI: Using ACPI for IRQ routing
|
---|
518 | [ 0.179151] Switching to clocksource tsc
|
---|
519 | [ 0.179996] pnp: PnP ACPI init
|
---|
520 | [ 0.179996] ACPI: bus type pnp registered
|
---|
521 | [ 0.188157] pnp: PnP ACPI: found 16 devices
|
---|
522 | [ 0.188225] ACPI: ACPI bus type pnp unregistered
|
---|
523 | [ 0.188289] PnPBIOS: Disabled by ACPI PNP
|
---|
524 | [ 0.188371] system 00:00: iomem range 0x0-0x9ffff could not be reserved
|
---|
525 | [ 0.188438] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
|
---|
526 | [ 0.188504] system 00:00: iomem range 0x100000-0x1dffffff could not be reserved
|
---|
527 | [ 0.189128] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
|
---|
528 | [ 0.189209] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
|
---|
529 | [ 0.189305] system 00:02: ioport range 0xe400-0xe47f has been reserved
|
---|
530 | [ 0.189370] system 00:02: ioport range 0xe480-0xe4ff has been reserved
|
---|
531 | [ 0.189434] system 00:02: ioport range 0xe600-0xe61f has been reserved
|
---|
532 | [ 0.189498] system 00:02: ioport range 0x480-0x48f has been reserved
|
---|
533 | [ 0.189563] system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
|
---|
534 | [ 0.189635] system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
|
---|
535 | [ 0.189723] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
|
---|
536 | [ 0.189801] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
|
---|
537 | [ 0.225000] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
|
---|
538 | [ 0.225071] pci 0000:00:01.0: IO window: 0xd000-0xdfff
|
---|
539 | [ 0.225136] pci 0000:00:01.0: MEM window: 0xe7800000-0xe7ffffff
|
---|
540 | [ 0.225202] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xfebfffff
|
---|
541 | [ 0.225287] pci 0000:00:01.0: setting latency timer to 64
|
---|
542 | [ 0.225297] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
|
---|
543 | [ 0.225303] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
|
---|
544 | [ 0.225309] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
|
---|
545 | [ 0.225315] pci_bus 0000:01: resource 1 mem: [0xe7800000-0xe7ffffff]
|
---|
546 | [ 0.225321] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xfebfffff]
|
---|
547 | [ 0.225394] NET: Registered protocol family 2
|
---|
548 | [ 0.225651] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
|
---|
549 | [ 0.226347] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
|
---|
550 | [ 0.226573] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
|
---|
551 | [ 0.226840] TCP: Hash tables configured (established 16384 bind 16384)
|
---|
552 | [ 0.226913] TCP reno registered
|
---|
553 | [ 0.227217] NET: Registered protocol family 1
|
---|
554 | [ 0.227346] pci 0000:00:02.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
|
---|
555 | [ 0.227450] pci 0000:00:02.2: PCI INT D disabled
|
---|
556 | [ 0.227535] pci 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
|
---|
557 | [ 0.227618] pci 0000:00:02.3: PCI INT A disabled
|
---|
558 | [ 0.227696] pci 0000:00:0e.0: enabling device (0014 -> 0015)
|
---|
559 | [ 0.227766] pci 0000:00:0e.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
|
---|
560 | [ 0.227848] pci 0000:00:0e.0: PCI INT A disabled
|
---|
561 | [ 0.227919] pci 0000:00:0e.1: enabling device (0014 -> 0015)
|
---|
562 | [ 0.227987] pci 0000:00:0e.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
|
---|
563 | [ 0.228067] pci 0000:00:0e.1: PCI INT B disabled
|
---|
564 | [ 0.228137] pci 0000:00:0e.2: enabling device (0014 -> 0016)
|
---|
565 | [ 0.228205] pci 0000:00:0e.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
|
---|
566 | [ 0.228291] pci 0000:00:0e.2: PCI INT C disabled
|
---|
567 | [ 0.228360] pci 0000:01:00.0: Boot video device
|
---|
568 | [ 0.228477] Unpacking initramfs...
|
---|
569 | [ 0.766078] Freeing initrd memory: 7695k freed
|
---|
570 | [ 0.780208] Simple Boot Flag at 0x3a set to 0x1
|
---|
571 | [ 0.780873] audit: initializing netlink socket (disabled)
|
---|
572 | [ 0.780969] type=2000 audit(1361876148.780:1): initialized
|
---|
573 | [ 0.786032] HugeTLB registered 4 MB page size, pre-allocated 0 pages
|
---|
574 | [ 0.788896] VFS: Disk quotas dquot_6.5.2
|
---|
575 | [ 0.789122] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
|
---|
576 | [ 0.789433] msgmni has been set to 941
|
---|
577 | [ 0.790113] alg: No test for stdrng (krng)
|
---|
578 | [ 0.790360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
|
---|
579 | [ 0.790447] io scheduler noop registered
|
---|
580 | [ 0.790503] io scheduler anticipatory registered
|
---|
581 | [ 0.790561] io scheduler deadline registered
|
---|
582 | [ 0.790727] io scheduler cfq registered (default)
|
---|
583 | [ 0.791179] isapnp: Scanning for PnP cards...
|
---|
584 | [ 1.145169] isapnp: No Plug & Play device found
|
---|
585 | [ 1.149943] Linux agpgart interface v0.103
|
---|
586 | [ 1.150203] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650]
|
---|
587 | [ 1.155824] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
|
---|
588 | [ 1.155993] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
|
---|
589 | [ 1.156257] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
|
---|
590 | [ 1.157212] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
|
---|
591 | [ 1.157688] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
|
---|
592 | [ 1.158210] serio: i8042 KBD port at 0x60,0x64 irq 1
|
---|
593 | [ 1.158291] serio: i8042 AUX port at 0x60,0x64 irq 12
|
---|
594 | [ 1.158702] mice: PS/2 mouse device common for all mice
|
---|
595 | [ 1.158904] rtc_cmos 00:06: RTC can wake from S4
|
---|
596 | [ 1.159107] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
|
---|
597 | [ 1.159212] rtc0: alarms up to one month, 242 bytes nvram
|
---|
598 | [ 1.159309] cpuidle: using governor ladder
|
---|
599 | [ 1.159367] cpuidle: using governor menu
|
---|
600 | [ 1.159432] No iBFT detected.
|
---|
601 | [ 1.160285] TCP cubic registered
|
---|
602 | [ 1.160657] NET: Registered protocol family 10
|
---|
603 | [ 1.162481] Mobile IPv6
|
---|
604 | [ 1.162549] NET: Registered protocol family 17
|
---|
605 | [ 1.162679] Using IPI No-Shortcut mode
|
---|
606 | [ 1.163042] registered taskstats version 1
|
---|
607 | [ 1.163470] rtc_cmos 00:06: setting system clock to 2013-02-26 10:55:49 UTC (1361876149)
|
---|
608 | [ 1.163719] Initalizing network drop monitor service
|
---|
609 | [ 1.163874] Freeing unused kernel memory: 380k freed
|
---|
610 | [ 1.164725] Write protecting the kernel text: 2512k
|
---|
611 | [ 1.164823] Write protecting the kernel read-only data: 924k
|
---|
612 | [ 1.176716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
|
---|
613 | [ 1.292899] usbcore: registered new interface driver usbfs
|
---|
614 | [ 1.293029] usbcore: registered new interface driver hub
|
---|
615 | [ 1.293219] usbcore: registered new device driver usb
|
---|
616 | [ 1.313606] usbcore: registered new interface driver hiddev
|
---|
617 | [ 1.313703] usbcore: registered new interface driver usbhid
|
---|
618 | [ 1.313766] usbhid: v2.6:USB HID core driver
|
---|
619 | [ 14.257934] RPC: Registered udp transport module.
|
---|
620 | [ 14.257941] RPC: Registered tcp transport module.
|
---|
621 | [ 14.257945] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
---|
622 | [ 14.336352] garp: Unknown symbol stp_proto_register
|
---|
623 | [ 14.336864] garp: Unknown symbol stp_proto_unregister
|
---|
624 | [ 14.377327] garp: Unknown symbol stp_proto_register
|
---|
625 | [ 14.377848] garp: Unknown symbol stp_proto_unregister
|
---|
626 | [ 14.630378] Slow work thread pool: Starting up
|
---|
627 | [ 14.630502] Slow work thread pool: Ready
|
---|
628 | [ 14.630666] FS-Cache: Loaded
|
---|
629 | [ 14.679617] FS-Cache: Netfs 'nfs' registered for caching
|
---|
630 | [ 14.827624] fuse init (API version 7.13)
|
---|
631 | [ 15.130897] SCSI subsystem initialized
|
---|
632 | [ 15.145435] Initializing USB Mass Storage driver...
|
---|
633 | [ 15.145502] usbcore: registered new interface driver usb-storage
|
---|
634 | [ 15.145508] USB Mass Storage support registered.
|
---|
635 | [ 15.182647] usbcore: registered new interface driver ums-cypress
|
---|
636 | [ 15.230547] usbcore: registered new interface driver usbserial
|
---|
637 | [ 15.231399] USB Serial support registered for generic
|
---|
638 | [ 15.232290] usbcore: registered new interface driver usbserial_generic
|
---|
639 | [ 15.232298] usbserial: USB Serial Driver core
|
---|
640 | [ 15.269319] USB Serial support registered for cp210x
|
---|
641 | [ 15.270180] usbcore: registered new interface driver cp210x
|
---|
642 | [ 15.270187] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
|
---|
643 | [ 15.346861] uhci_hcd: USB Universal Host Controller Interface driver
|
---|
644 | [ 15.346981] uhci_hcd 0000:00:0e.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
|
---|
645 | [ 15.347004] uhci_hcd 0000:00:0e.0: UHCI Host Controller
|
---|
646 | [ 15.347065] uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 1
|
---|
647 | [ 15.347128] uhci_hcd 0000:00:0e.0: irq 17, io base 0x00009800
|
---|
648 | [ 15.347213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
|
---|
649 | [ 15.347219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
650 | [ 15.347225] usb usb1: Product: UHCI Host Controller
|
---|
651 | [ 15.347229] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
|
---|
652 | [ 15.347233] usb usb1: SerialNumber: 0000:00:0e.0
|
---|
653 | [ 15.348637] usb usb1: configuration #1 chosen from 1 choice
|
---|
654 | [ 15.349004] hub 1-0:1.0: USB hub found
|
---|
655 | [ 15.349041] hub 1-0:1.0: 2 ports detected
|
---|
656 | [ 15.349208] uhci_hcd 0000:00:0e.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
|
---|
657 | [ 15.349231] uhci_hcd 0000:00:0e.1: UHCI Host Controller
|
---|
658 | [ 15.349256] uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 2
|
---|
659 | [ 15.349320] uhci_hcd 0000:00:0e.1: irq 18, io base 0x00009400
|
---|
660 | [ 15.349409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
|
---|
661 | [ 15.349416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
662 | [ 15.349421] usb usb2: Product: UHCI Host Controller
|
---|
663 | [ 15.349426] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
|
---|
664 | [ 15.349430] usb usb2: SerialNumber: 0000:00:0e.1
|
---|
665 | [ 15.350797] usb usb2: configuration #1 chosen from 1 choice
|
---|
666 | [ 15.351164] hub 2-0:1.0: USB hub found
|
---|
667 | [ 15.351202] hub 2-0:1.0: 2 ports detected
|
---|
668 | [ 15.414717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
---|
669 | [ 15.414779] ohci_hcd 0000:00:02.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
|
---|
670 | [ 15.414837] ohci_hcd 0000:00:02.2: OHCI Host Controller
|
---|
671 | [ 15.414878] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
|
---|
672 | [ 15.414927] ohci_hcd 0000:00:02.2: irq 20, io mem 0xe7000000
|
---|
673 | [ 15.470045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
|
---|
674 | [ 15.470052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
675 | [ 15.470057] usb usb3: Product: OHCI Host Controller
|
---|
676 | [ 15.470061] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
|
---|
677 | [ 15.470066] usb usb3: SerialNumber: 0000:00:02.2
|
---|
678 | [ 15.471406] usb usb3: configuration #1 chosen from 1 choice
|
---|
679 | [ 15.471757] hub 3-0:1.0: USB hub found
|
---|
680 | [ 15.471797] hub 3-0:1.0: 2 ports detected
|
---|
681 | [ 15.471962] ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
|
---|
682 | [ 15.472075] ohci_hcd 0000:00:02.3: OHCI Host Controller
|
---|
683 | [ 15.472115] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 4
|
---|
684 | [ 15.472178] ohci_hcd 0000:00:02.3: irq 23, io mem 0xe6800000
|
---|
685 | [ 15.530097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
|
---|
686 | [ 15.530106] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
687 | [ 15.530112] usb usb4: Product: OHCI Host Controller
|
---|
688 | [ 15.530117] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
|
---|
689 | [ 15.530122] usb usb4: SerialNumber: 0000:00:02.3
|
---|
690 | [ 15.531471] usb usb4: configuration #1 chosen from 1 choice
|
---|
691 | [ 15.531828] hub 4-0:1.0: USB hub found
|
---|
692 | [ 15.531868] hub 4-0:1.0: 2 ports detected
|
---|
693 | [ 15.581208] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
---|
694 | [ 15.581216] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
|
---|
695 | [ 15.581278] ehci_hcd 0000:00:0e.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
|
---|
696 | [ 15.581338] ehci_hcd 0000:00:0e.2: EHCI Host Controller
|
---|
697 | [ 15.581381] ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 5
|
---|
698 | [ 15.581496] ehci_hcd 0000:00:0e.2: irq 19, io mem 0xe5800000
|
---|
699 | [ 15.592024] ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00
|
---|
700 | [ 15.592081] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
|
---|
701 | [ 15.592087] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
702 | [ 15.592093] usb usb5: Product: EHCI Host Controller
|
---|
703 | [ 15.592097] usb usb5: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
|
---|
704 | [ 15.592102] usb usb5: SerialNumber: 0000:00:0e.2
|
---|
705 | [ 15.593416] usb usb5: configuration #1 chosen from 1 choice
|
---|
706 | [ 15.593766] hub 5-0:1.0: USB hub found
|
---|
707 | [ 15.593802] hub 5-0:1.0: 4 ports detected
|
---|
708 | [ 15.736036] Failed initialization of WD-7000 SCSI card!
|
---|
709 | [ 15.847960] DC390: clustering now enabled by default. If you get problems load
|
---|
710 | [ 15.847969] with "disable_clustering=1" and report to maintainers
|
---|
711 | [ 15.973231] sym53c416.c: Version 1.0.0-ac
|
---|
712 | [ 16.014228] st: Version 20081215, fixed bufsize 32768, s/g segs 256
|
---|
713 | [ 16.277646] Loading iSCSI transport class v2.0-870.
|
---|
714 | [ 16.451344] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
|
---|
715 | [ 16.533583] QLogic Fibre Channel HBA Driver: 8.03.01-k6
|
---|
716 | [ 16.606517] ppa: Unknown symbol parport_register_device
|
---|
717 | [ 16.606906] ppa: Unknown symbol parport_register_driver
|
---|
718 | [ 16.607199] ppa: Unknown symbol parport_release
|
---|
719 | [ 16.607631] ppa: Unknown symbol parport_claim
|
---|
720 | [ 16.608208] ppa: Unknown symbol parport_unregister_device
|
---|
721 | [ 16.608477] ppa: Unknown symbol parport_unregister_driver
|
---|
722 | [ 16.686164] osst :I: Tape driver with OnStream support version 0.99.4
|
---|
723 | [ 16.686170] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
|
---|
724 | [ 16.724786] nsp32: loading...
|
---|
725 | [ 16.760943] NCR53c406a: no available ports found
|
---|
726 | [ 16.802921] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
|
---|
727 | [ 16.839367] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
|
---|
728 | [ 16.879539] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
|
---|
729 | [ 17.055708] iscsi: registered transport (tcp)
|
---|
730 | [ 17.204505] imm: Unknown symbol parport_register_device
|
---|
731 | [ 17.204799] imm: Unknown symbol parport_register_driver
|
---|
732 | [ 17.205101] imm: Unknown symbol parport_release
|
---|
733 | [ 17.205554] imm: Unknown symbol parport_claim
|
---|
734 | [ 17.206087] imm: Unknown symbol parport_unregister_device
|
---|
735 | [ 17.206362] imm: Unknown symbol parport_unregister_driver
|
---|
736 | [ 17.286504] GDT-HA: Storage RAID Controller Driver. Version: 3.05
|
---|
737 | [ 17.323858] scsi: <fdomain> Detection failed (no card)
|
---|
738 | [ 17.496310] Loading Adaptec I2O RAID: Version 2.4 Build 5go
|
---|
739 | [ 17.496318] Detecting Adaptec I2O RAID controllers...
|
---|
740 | [ 17.608382] emc: device handler registered
|
---|
741 | [ 17.643495] alua: device handler registered
|
---|
742 | [ 17.749116] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
|
---|
743 | [ 17.750188] iscsi: registered transport (cxgb3i)
|
---|
744 | [ 17.825568] Broadcom NetXtreme II CNIC Driver cnic v2.0.1 (Oct 01, 2009)
|
---|
745 | [ 17.836778] Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1e (June 22, 2009)
|
---|
746 | [ 17.837878] iscsi: registered transport (bnx2i)
|
---|
747 | [ 17.882919] iscsi: registered transport (be2iscsi)
|
---|
748 | [ 18.278434] Adaptec aacraid driver 1.1-7[28000]-ms
|
---|
749 | [ 18.317327] 3ware Storage Controller device driver for Linux v1.26.02.002.
|
---|
750 | [ 18.356970] 3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
|
---|
751 | [ 18.409649] yenta_socket: Unknown symbol pccard_nonstatic_ops
|
---|
752 | [ 18.535391] VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
|
---|
753 | [ 18.755767] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
|
---|
754 | [ 18.799911] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
|
---|
755 | [ 18.903402] dca service started, version 1.12.1
|
---|
756 | [ 18.915356] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
|
---|
757 | [ 18.915365] Copyright (c) 2007-2011 Intel Corporation.
|
---|
758 | [ 18.996199] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
|
---|
759 | [ 18.996208] e100: Copyright(c) 1999-2006 Intel Corporation
|
---|
760 | [ 19.041116] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
|
---|
761 | [ 19.041123] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
|
---|
762 | [ 19.083440] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
|
---|
763 | [ 19.083448] Copyright (c) 1999-2006 Intel Corporation.
|
---|
764 | [ 19.193206] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.1 (2009/08/12)
|
---|
765 | [ 19.348773] 8139too Fast Ethernet driver 0.9.28
|
---|
766 | [ 19.389518] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
|
---|
767 | [ 19.471248] generic: Unknown symbol del_mtd_partitions
|
---|
768 | [ 19.471898] generic: Unknown symbol onenand_release
|
---|
769 | [ 19.472281] generic: Unknown symbol del_mtd_device
|
---|
770 | [ 19.472587] generic: Unknown symbol onenand_scan
|
---|
771 | [ 19.473061] generic: Unknown symbol add_mtd_device
|
---|
772 | [ 19.473357] generic: Unknown symbol add_mtd_partitions
|
---|
773 | [ 19.473682] generic: Unknown symbol parse_mtd_partitions
|
---|
774 | [ 19.521448] I2O subsystem v1.325
|
---|
775 | [ 19.521458] i2o: max drivers = 8
|
---|
776 | [ 19.562043] I2O Block Device OSM v1.325
|
---|
777 | [ 19.563108] block-osm: registered device at major 80
|
---|
778 | [ 19.611883] Fusion MPT base driver 3.04.12
|
---|
779 | [ 19.611891] Copyright (c) 1999-2008 LSI Corporation
|
---|
780 | [ 19.638214] Fusion MPT SPI Host driver 3.04.12
|
---|
781 | [ 19.722478] Fusion MPT SAS Host driver 3.04.12
|
---|
782 | [ 19.766345] Fusion MPT FC Host driver 3.04.12
|
---|
783 | [ 19.807209] Fusion MPT misc device (ioctl) driver 3.04.12
|
---|
784 | [ 19.809025] mptctl: Registered with Fusion MPT base driver
|
---|
785 | [ 19.809035] mptctl: /dev/mptctl @ (major,minor=10,220)
|
---|
786 | [ 19.949691] Uniform Multi-Platform E-IDE driver
|
---|
787 | [ 19.996456] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
|
---|
788 | [ 20.037850] ide-gd driver 1.18
|
---|
789 | [ 20.154320] ide-cd driver 5.00
|
---|
790 | [ 20.256509] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
|
---|
791 | [ 20.393323] paride: Unknown symbol parport_register_device
|
---|
792 | [ 20.393663] paride: Unknown symbol parport_release
|
---|
793 | [ 20.393979] paride: Unknown symbol parport_claim
|
---|
794 | [ 20.394313] paride: Unknown symbol parport_unregister_device
|
---|
795 | [ 20.394744] paride: Unknown symbol parport_find_base
|
---|
796 | [ 20.395058] paride: Unknown symbol parport_put_port
|
---|
797 | [ 20.465448] loop: module loaded
|
---|
798 | [ 20.547762] Floppy drive(s): fd0 is 1.44M
|
---|
799 | [ 20.567811] FDC 0 is a post-1991 82077
|
---|
800 | [ 20.619916] HP CISS Driver (v 3.6.20)
|
---|
801 | [ 20.728890] libata version 3.00 loaded.
|
---|
802 | [ 20.938648] pata_sis 0000:00:02.5: version 0.5.2
|
---|
803 | [ 20.938996] scsi2 : pata_sis
|
---|
804 | [ 20.941482] scsi3 : pata_sis
|
---|
805 | [ 20.942689] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
|
---|
806 | [ 20.942697] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
|
---|
807 | [ 21.116425] ata1.00: ATA-4: FUJITSU MPD3043AT, DD-03-47, max UDMA/66
|
---|
808 | [ 21.116433] ata1.00: 8448300 sectors, multi 16: LBA
|
---|
809 | [ 21.116503] ata1.01: ATAPI: HL-DT-ST DVDRAM GMA-4020B, A109, max UDMA/33
|
---|
810 | [ 21.132276] ata1.00: configured for UDMA/66
|
---|
811 | [ 21.148323] ata1.01: configured for UDMA/33
|
---|
812 | [ 21.150907] scsi 2:0:0:0: Direct-Access ATA FUJITSU MPD3043A DD-0 PQ: 0 ANSI: 5
|
---|
813 | [ 21.153773] sd 2:0:0:0: Attached scsi generic sg0 type 0
|
---|
814 | [ 21.161266] scsi 2:0:1:0: CD-ROM HL-DT-ST DVDRAM GMA-4020B A109 PQ: 0 ANSI: 5
|
---|
815 | [ 21.161655] sd 2:0:0:0: [sda] 8448300 512-byte logical blocks: (4.32 GB/4.02 GiB)
|
---|
816 | [ 21.165362] sd 2:0:0:0: [sda] Write Protect is off
|
---|
817 | [ 21.165373] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
|
---|
818 | [ 21.165451] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
---|
819 | [ 21.168945] sr0: scsi3-mmc drive: 10x/22x writer dvd-ram cd/rw xa/form2 cdda tray
|
---|
820 | [ 21.168955] Uniform CD-ROM driver Revision: 3.20
|
---|
821 | [ 21.169266] sr 2:0:1:0: Attached scsi CD-ROM sr0
|
---|
822 | [ 21.169487] sr 2:0:1:0: Attached scsi generic sg1 type 5
|
---|
823 | [ 21.171634] sda: sda1 sda2
|
---|
824 | [ 21.206524] sd 2:0:0:0: [sda] Attached SCSI disk
|
---|
825 | [ 32.469734] ISO 9660 Extensions: Microsoft Joliet Level 3
|
---|
826 | [ 32.539574] ISO 9660 Extensions: RRIP_1991A
|
---|
827 | [ 32.662308] ISO 9660 Extensions: Microsoft Joliet Level 3
|
---|
828 | [ 32.732241] ISO 9660 Extensions: RRIP_1991A
|
---|
829 | [ 49.484771] garp: Unknown symbol stp_proto_register
|
---|
830 | [ 49.485445] garp: Unknown symbol stp_proto_unregister
|
---|
831 | [ 49.522456] garp: Unknown symbol stp_proto_register
|
---|
832 | [ 49.523134] garp: Unknown symbol stp_proto_unregister
|
---|
833 | [ 49.875445] OCFS2 Node Manager 1.5.0
|
---|
834 | [ 49.886745] ocfs2: Unknown symbol ocfs2_dlm_lock_status
|
---|
835 | [ 49.888141] ocfs2: Unknown symbol ocfs2_stack_supports_plocks
|
---|
836 | [ 49.889341] ocfs2: Unknown symbol ocfs2_cluster_connect
|
---|
837 | [ 49.889797] ocfs2: Unknown symbol qtree_entry_unused
|
---|
838 | [ 49.891418] ocfs2: Unknown symbol ocfs2_dlm_dump_lksb
|
---|
839 | [ 49.891893] ocfs2: Unknown symbol ocfs2_cluster_this_node
|
---|
840 | [ 49.892409] ocfs2: Unknown symbol qtree_write_dquot
|
---|
841 | [ 49.892763] ocfs2: Unknown symbol ocfs2_dlm_lock
|
---|
842 | [ 49.893248] ocfs2: Unknown symbol ocfs2_dlm_lvb_valid
|
---|
843 | [ 49.894421] ocfs2: Unknown symbol qtree_release_dquot
|
---|
844 | [ 49.894964] ocfs2: Unknown symbol ocfs2_dlm_unlock
|
---|
845 | [ 49.896213] ocfs2: Unknown symbol qtree_read_dquot
|
---|
846 | [ 49.897196] ocfs2: Unknown symbol ocfs2_plock
|
---|
847 | [ 49.898476] ocfs2: Unknown symbol ocfs2_stack_glue_set_locking_protocol
|
---|
848 | [ 49.901014] ocfs2: Unknown symbol ocfs2_dlm_lvb
|
---|
849 | [ 49.903519] ocfs2: Unknown symbol ocfs2_cluster_disconnect
|
---|
850 | [ 49.904395] ocfs2: Unknown symbol ocfs2_cluster_hangup
|
---|
851 | [ 49.987656] OCFS2 DLM 1.5.0
|
---|
852 | [ 50.088423] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
|
---|
853 | [ 50.094623] SGI XFS Quota Management subsystem
|
---|
854 | [ 50.331133] JFS: nTxBlock = 3767, nTxLock = 30138
|
---|
855 | [ 50.497085] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
|
---|
856 | [ 50.563534] Btrfs loaded
|
---|
857 | [ 51.130409] md: raid10 personality registered for level 10
|
---|
858 | [ 51.190593] device-mapper: uevent: version 1.0.3
|
---|
859 | [ 51.193481] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
|
---|
860 | [ 51.371682] md: raid0 personality registered for level 0
|
---|
861 | [ 51.414284] md: raid1 personality registered for level 1
|
---|
862 | [ 51.491125] md: multipath personality registered for level -4
|
---|
863 | [ 51.534724] device-mapper: multipath: version 1.1.0 loaded
|
---|
864 | [ 51.537365] device-mapper: multipath round-robin: version 1.0.0 loaded
|
---|
865 | [ 51.645148] md: linear personality registered for level -1
|
---|
866 | [ 51.683669] async_tx: api initialized (async)
|
---|
867 | [ 51.689127] xor: automatically using best checksumming function: pIII_sse
|
---|
868 | [ 51.708013] pIII_sse : 2190.000 MB/sec
|
---|
869 | [ 51.708019] xor: using function: pIII_sse (2190.000 MB/sec)
|
---|
870 | [ 51.784068] raid6: int32x1 455 MB/s
|
---|
871 | [ 51.852103] raid6: int32x2 565 MB/s
|
---|
872 | [ 51.920021] raid6: int32x4 481 MB/s
|
---|
873 | [ 51.988079] raid6: int32x8 382 MB/s
|
---|
874 | [ 52.056072] raid6: mmxx1 1420 MB/s
|
---|
875 | [ 52.124047] raid6: mmxx2 1788 MB/s
|
---|
876 | [ 52.192068] raid6: sse1x1 895 MB/s
|
---|
877 | [ 52.260038] raid6: sse1x2 1446 MB/s
|
---|
878 | [ 52.328013] raid6: sse2x1 1727 MB/s
|
---|
879 | [ 52.396027] raid6: sse2x2 1892 MB/s
|
---|
880 | [ 52.396033] raid6: using algorithm sse2x2 (1892 MB/s)
|
---|
881 | [ 52.413336] raid456: Unknown symbol async_raid6_2data_recov
|
---|
882 | [ 52.416782] raid456: Unknown symbol async_raid6_datap_recov
|
---|
883 | [ 52.541943] ACPI: Invalid PBLK length [5]
|
---|
884 | [ 52.543102] processor LNXCPU:00: registered as cooling_device0
|
---|
885 | [ 52.585517] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
|
---|
886 | [ 52.585541] ACPI: Power Button [PWRB]
|
---|
887 | [ 52.586973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
|
---|
888 | [ 52.586996] ACPI: Power Button [PWRF]
|
---|
889 | [ 52.758640] parport_pc 00:0a: reported by Plug and Play ACPI
|
---|
890 | [ 52.758722] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
|
---|
891 | [ 52.919029] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
|
---|
892 | [ 52.926297] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
---|
893 | [ 53.833613] sym53c416.c: Version 1.0.0-ac
|
---|
894 | [ 53.955901] imm: Version 2.05 (for Linux 2.4.0)
|
---|
895 | [ 54.185128] Failed initialization of WD-7000 SCSI card!
|
---|
896 | [ 54.336563] ppa: Version 2.07 (for Linux 2.4.x)
|
---|
897 | [ 54.381037] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsscsi: <fdomain> Detection failed (no card)
|
---|
898 | [ 54.692102] NCR53c406a: no available ports found
|
---|
899 | [ 55.302138] Loading Adaptec I2O RAID: Version 2.4 Build 5go
|
---|
900 | [ 55.302146] Detecting Adaptec I2O RAID controllers...
|
---|
901 | [ 56.050246] yenta_socket: Unknown symbol pccard_nonstatic_ops
|
---|
902 | [ 56.373389] Sundance Technology IPG Triple-Speed Ethernet 0000:00:0f.0: enabling device (0014 -> 0017)
|
---|
903 | [ 56.373409] Sundance Technology IPG Triple-Speed Ethernet 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
|
---|
904 | [ 56.373416] 0000:00:0f.0: IC PLUS IP1000 1000/100/10 based NIC
|
---|
905 | [ 56.423239] Ethernet device registered as: eth0
|
---|
906 | [ 57.042016] generic: Unknown symbol del_mtd_partitions
|
---|
907 | [ 57.042783] generic: Unknown symbol onenand_release
|
---|
908 | [ 57.043215] generic: Unknown symbol del_mtd_device
|
---|
909 | [ 57.043623] generic: Unknown symbol onenand_scan
|
---|
910 | [ 57.044241] generic: Unknown symbol add_mtd_device
|
---|
911 | [ 57.044650] generic: Unknown symbol add_mtd_partitions
|
---|
912 | [ 57.045093] generic: Unknown symbol parse_mtd_partitions
|
---|
913 | [ 57.404178] input: PC Speaker as /devices/platform/pcspkr/input/input3
|
---|
914 | [ 57.538677] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x200, speed 727kHz
|
---|
915 | [ 58.176133] brd: module loaded
|
---|
916 | [ 58.534104] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
|
---|
917 | 10:57 -------------
|
---|
918 | 10:57 /proc/mdstat:
|
---|
919 | 10:57 -------------
|
---|
920 | Personalities : [raid10] [raid0] [raid1] [multipath] [linear]
|
---|
921 | unused devices: <none>
|
---|
922 | 10:57 -------------
|
---|
923 | 10:57 /proc/swaps:
|
---|
924 | 10:57 -------------
|
---|
925 | Filename Type Size Used Priority
|
---|
926 | 10:57 -------------
|
---|
927 | 10:57 /proc/filesystems:
|
---|
928 | 10:57 -------------
|
---|
929 | nodev sysfs
|
---|
930 | nodev rootfs
|
---|
931 | nodev bdev
|
---|
932 | nodev proc
|
---|
933 | nodev cgroup
|
---|
934 | nodev cpuset
|
---|
935 | nodev tmpfs
|
---|
936 | nodev devtmpfs
|
---|
937 | nodev debugfs
|
---|
938 | nodev securityfs
|
---|
939 | nodev sockfs
|
---|
940 | nodev pipefs
|
---|
941 | nodev anon_inodefs
|
---|
942 | nodev inotifyfs
|
---|
943 | nodev devpts
|
---|
944 | nodev ramfs
|
---|
945 | nodev hugetlbfs
|
---|
946 | nodev mqueue
|
---|
947 | nodev usbfs
|
---|
948 | nodev rpc_pipefs
|
---|
949 | nodev nfs
|
---|
950 | nodev nfs4
|
---|
951 | iso9660
|
---|
952 | nodev fuse
|
---|
953 | fuseblk
|
---|
954 | nodev fusectl
|
---|
955 | vfat
|
---|
956 | ext4
|
---|
957 | nodev configfs
|
---|
958 | minix
|
---|
959 | xfs
|
---|
960 | ext2
|
---|
961 | ext3
|
---|
962 | jfs
|
---|
963 | reiserfs
|
---|
964 | nodev nfsd
|
---|
965 | btrfs
|
---|
966 | msdos
|
---|
967 | 10:57 -------------
|
---|
968 | 10:57 /proc/partitions:
|
---|
969 | 10:57 -------------
|
---|
970 | major minor #blocks name
|
---|
971 |
|
---|
972 | 8 0 4224150 sda
|
---|
973 | 8 1 3984088 sda1
|
---|
974 | 8 2 232942 sda2
|
---|
975 | 10:57 -------------
|
---|
976 | 10:57 fdisk result:
|
---|
977 | 10:57 -------------
|
---|
978 |
|
---|
979 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
980 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
981 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
982 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
983 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
984 | Disk identifier: 0x00076729
|
---|
985 |
|
---|
986 | Device Boot Start End Blocks Id System
|
---|
987 | /dev/sda1 * 1 496 3984088+ 83 Linux
|
---|
988 | /dev/sda2 497 525 232942+ 82 Linux swap / Solaris
|
---|
989 | 10:57 -------------
|
---|
990 | 10:57 /tmp/mondo-restore.cfg result:
|
---|
991 | 10:57 -------------
|
---|
992 | media-size 0
|
---|
993 | files-in-filelist 88174
|
---|
994 | last-filelist-number 65
|
---|
995 | internal-tape-block-size 32768
|
---|
996 | use-lzo no
|
---|
997 | use-gzip no
|
---|
998 | use-star no
|
---|
999 | use-comp yes
|
---|
1000 | datestamp Mon Feb 25 19:37:03 GMT 2013
|
---|
1001 | total-slices 1
|
---|
1002 | bootloader.device /dev/sda
|
---|
1003 | bootloader.name GRUB
|
---|
1004 | bootloader.ver
|
---|
1005 | backup-media-type cdr
|
---|
1006 | differential 0
|
---|
1007 | 10:57 backup-media-type is specified in config file - great.
|
---|
1008 | 10:57 Calling post-init
|
---|
1009 | 10:57 Executing preliminary script
|
---|
1010 | Here is my /tmp/mountlist.txt
|
---|
1011 | /dev/sda1 / ext4 3903763 a81e7e56-5bcd-4dd1-974f-56c54bbcb9bc
|
---|
1012 | /dev/sda2 swap swap 240964 9352f4cf-52da-439b-9d5f-e69d5cf012c6
|
---|
1013 | 10:57 mondorestore found; cool...
|
---|
1014 | 10:57 mount-me found
|
---|
1015 | 10:57 unmount-me found
|
---|
1016 | 10:57 mondorestore found
|
---|
1017 | 10:57 ------------------INTERACTIVE------------------
|
---|
1018 | [TH=9178] libmondo-tools.c->reset_bkpinfo#785: Hi
|
---|
1019 | root is mounted at rootfs
|
---|
1020 |
|
---|
1021 | No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
1022 | [TH=9178] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
|
---|
1023 | [TH=9178] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2978: bkpinfo->tmpdir is being set to //mondo.tmp.28Mt2h
|
---|
1024 | [TH=9178] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2991: bkpinfo->scratchdir is being set to //mondo.scratch.17767
|
---|
1025 | running: mkdir -p /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1026 | --------------------------------start of output-----------------------------
|
---|
1027 | --------------------------------end of output------------------------------
|
---|
1028 | ...ran just fine. :-)
|
---|
1029 | root is mounted at rootfs
|
---|
1030 |
|
---|
1031 | No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
1032 | [TH=9178] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
|
---|
1033 | running: mount / -o remount,rw > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1034 | --------------------------------start of output-----------------------------
|
---|
1035 | --------------------------------end of output------------------------------
|
---|
1036 | ...ran just fine. :-)
|
---|
1037 | [Main] libmondo-tools.c->get_kernel_version#254: g_kernel_version = 2.632000
|
---|
1038 | [Main] mondorestore.c->main#2896: FYI - g_mountlist_fname = /tmp/mountlist.txt
|
---|
1039 | running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1040 | --------------------------------start of output-----------------------------
|
---|
1041 | --------------------------------end of output------------------------------
|
---|
1042 | ...ran just fine. :-)
|
---|
1043 | running: umount -d /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1044 | --------------------------------start of output-----------------------------
|
---|
1045 | --------------------------------end of output------------------------------
|
---|
1046 | ...ran just fine. :-)
|
---|
1047 | running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1048 | --------------------------------start of output-----------------------------
|
---|
1049 | --------------------------------end of output------------------------------
|
---|
1050 | ...ran just fine. :-)
|
---|
1051 | -------------- Mondo Restore v3.0.320130223004458-r3083 -------------
|
---|
1052 | DON'T PANIC! Mondorestore logs almost everything, so please
|
---|
1053 | don't break out in a cold sweat just because you see a few
|
---|
1054 | error messages in the log. Read them; analyze them; see if
|
---|
1055 | they are significant; above all, verify your backups! Please
|
---|
1056 | attach a compressed copy of this log to any e-mail you send
|
---|
1057 | to the Mondo mailing list when you are seeking technical
|
---|
1058 | support. Without it, we can't help you. - DevTeam
|
---|
1059 | ------------------------------------------------------------
|
---|
1060 | BTW, despite (or perhaps because of) the wealth of messages,
|
---|
1061 | some users are inclined to stop reading this log. If Mondo
|
---|
1062 | stopped for some reason, chances are it's detailed here.
|
---|
1063 | More than likely there's a message at the very end of this
|
---|
1064 | log that will tell you what is wrong. Please read it!
|
---|
1065 | ------------------------------------------------------------
|
---|
1066 | [Main] mondorestore.c->main#2931: I am in disaster recovery mode
|
---|
1067 | [Main] mondorestore.c->main#2936: what time is it
|
---|
1068 | [Main] libmondo-files.c->find_home_of_exe#369: find_home_of_exe () --- Found afio at /usr/bin/afio
|
---|
1069 | running: which mkfs.vfat > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1070 | --------------------------------start of output-----------------------------
|
---|
1071 | /sbin/mkfs.vfat
|
---|
1072 | --------------------------------end of output------------------------------
|
---|
1073 | ...ran just fine. :-)
|
---|
1074 | [Main] libmondo-cli.c->handle_incoming_parameters#100: Switches:-
|
---|
1075 | [Main] libmondo-cli.c->handle_incoming_parameters#104: -Z interactive
|
---|
1076 | [Main] mondorestore.c->main#3111: I must be in disaster recovery mode.
|
---|
1077 | [Main] mondorestore.c->main#3112: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt
|
---|
1078 | [Main] mondorestore.c->main#3114: About to call load_mountlist and load_raidtab
|
---|
1079 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#764: Backup medium is CD-R[W]
|
---|
1080 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#803: Internal tape block size has been custom-set to 32768
|
---|
1081 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#842: differential var = '0'
|
---|
1082 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#846: This is a regular (full) backup
|
---|
1083 | [Main] libmondo-mountlist.c->load_mountlist#829: Loading mountlist...
|
---|
1084 | [Main] libmondo-mountlist.c->load_mountlist#900: /dev/sda1 / ext4 3903763 a81e7e56-5bcd-4dd1-974f-56c54bbcb9bc
|
---|
1085 | [Main] libmondo-mountlist.c->load_mountlist#900: /dev/sda2 swap swap 240964 9352f4cf-52da-439b-9d5f-e69d5cf012c6
|
---|
1086 | [Main] libmondo-mountlist.c->load_mountlist#912: Mountlist loaded successfully.
|
---|
1087 | [Main] libmondo-mountlist.c->load_mountlist#913: 2 entries in mountlist
|
---|
1088 | [Main] libmondo-files.c->length_of_file#550: filename=/etc/raidtab
|
---|
1089 | Unable to openin filename (No such file or directory)
|
---|
1090 | [Main] libmondo-raid.c->load_raidtab_into_raidlist#611: Raidtab is very small or non-existent. Ignoring it.
|
---|
1091 | [Main] mondorestore.c->main#3119: Returned from calling load_mountlist and load_raidtab successfully
|
---|
1092 | [Main] mondorestore.c->main#3154: Send in the clowns.
|
---|
1093 | [Main] mondorestore.c->main#3161: catchall
|
---|
1094 | [Main] mondorestore.c->catchall_mode#265: inside catchall
|
---|
1095 | [Main] mondorestore.c->catchall_mode#270: pre wrm
|
---|
1096 | [Main] mondorestore.c->catchall_mode#272: post wrm
|
---|
1097 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2212: media type = cdrw
|
---|
1098 |
|
---|
1099 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2293: CD-ROM device assumed to be at /dev/cdrom
|
---|
1100 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2852: isodir = /
|
---|
1101 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2853: netfs_mount = ''
|
---|
1102 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2862: media device = /dev/cdrom
|
---|
1103 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2863: media size = 2046976
|
---|
1104 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2864: media type = cdrw
|
---|
1105 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2865: prefix = mondorescue
|
---|
1106 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2866: compression = 5
|
---|
1107 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2867: exclude_path = (null)
|
---|
1108 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2868: include_path =
|
---|
1109 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2876: scratchdir = '//mondo.scratch.17767/mondo.scratch.11893'
|
---|
1110 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2877: tmpdir = '//mondo.tmp.28Mt2h'
|
---|
1111 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2878: image_devs = ''
|
---|
1112 | [Main] libmondo-devices.c->interactively_obtain_media_parameters_from_user#2880: boot_device = '' (loader=)
|
---|
1113 | [Main] mondorestore.c->catchall_mode#289: post int
|
---|
1114 | [Main] mondorestore.c->catchall_mode#302: IM selected
|
---|
1115 | [Main] mondorestore.c->interactive_mode#449: interactive_mode --- starting (great, assertions OK)
|
---|
1116 | [Main] mondorestore.c->interactive_mode#458: interactive_mode --- assertions OK
|
---|
1117 | [Main] mondorestore.c->interactive_mode#468: About to load config file
|
---|
1118 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2161: gcffa --- starting
|
---|
1119 | I'm thinking...
|
---|
1120 | running: mkdir -p //mondo.tmp.28Mt2h/mount.bootdisk > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1121 | --------------------------------start of output-----------------------------
|
---|
1122 | --------------------------------end of output------------------------------
|
---|
1123 | ...ran just fine. :-)
|
---|
1124 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2179: mountpt = //mondo.tmp.28Mt2h/mount.bootdisk; cfg_file=//mondo.tmp.28Mt2h/tmp/mondo-restore.cfg
|
---|
1125 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2182: gcffa --- we don't have cfg file yet.
|
---|
1126 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2186: gcffa --- calling mount_media now :)
|
---|
1127 | running: mount | grep -F /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1128 | --------------------------------start of output-----------------------------
|
---|
1129 | --------------------------------end of output------------------------------
|
---|
1130 | ...ran with res=256
|
---|
1131 | [Main] libmondo-devices.c->mount_media#1450: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom
|
---|
1132 | running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1133 | --------------------------------start of output-----------------------------
|
---|
1134 | --------------------------------end of output------------------------------
|
---|
1135 | ...ran just fine. :-)
|
---|
1136 | [Main] libmondo-devices.c->mount_media#1465: Mounted media drive OK
|
---|
1137 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2189: gcffa --- managed to mount CD; so, no need for Plan B
|
---|
1138 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /mnt/cdrom mounted?
|
---|
1139 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2246: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz
|
---|
1140 | running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1141 | --------------------------------start of output-----------------------------
|
---|
1142 | ./tmp/filelist.full.gz
|
---|
1143 | ./tmp/biggielist.txt
|
---|
1144 | ./tmp/mountlist.txt
|
---|
1145 | ./tmp/mondo-restore.cfg
|
---|
1146 | tar: ./tmp/i-want-my-lvm: not found in archive
|
---|
1147 | --------------------------------end of output------------------------------
|
---|
1148 | ...ran with res=256
|
---|
1149 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2262: gcffa --- great! We've got the config file
|
---|
1150 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2267: cp -f /mondo.tmp.28Mt2h/tmp/mondo-restore.cfg //mondo.tmp.28Mt2h/tmp/mondo-restore.cfg
|
---|
1151 | running: cp -f /mondo.tmp.28Mt2h/tmp/mondo-restore.cfg //mondo.tmp.28Mt2h/tmp/mondo-restore.cfg > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1152 | --------------------------------start of output-----------------------------
|
---|
1153 | cp: '/mondo.tmp.28Mt2h/tmp/mondo-restore.cfg' and '//mondo.tmp.28Mt2h/tmp/mondo-restore.cfg' are the same file
|
---|
1154 | --------------------------------end of output------------------------------
|
---|
1155 | ...ran with res=256
|
---|
1156 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2272: ... but an error occurred when I tried to move it to //mondo.tmp.28Mt2h/tmp/mondo-restore.cfg
|
---|
1157 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2279: cp -f /mondo.tmp.28Mt2h/tmp/mountlist.txt //mondo.tmp.28Mt2h/tmp/mountlist.txt
|
---|
1158 | running: umount -d /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1159 | --------------------------------start of output-----------------------------
|
---|
1160 | --------------------------------end of output------------------------------
|
---|
1161 | ...ran just fine. :-)
|
---|
1162 | Recovered mondo-restore.cfg
|
---|
1163 | running: cp -f //mondo.tmp.28Mt2h/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1164 | --------------------------------start of output-----------------------------
|
---|
1165 | --------------------------------end of output------------------------------
|
---|
1166 | ...ran just fine. :-)
|
---|
1167 | running: cp -f etc/raidtab /etc/ > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1168 | --------------------------------start of output-----------------------------
|
---|
1169 | cp: can't stat 'etc/raidtab': No such file or directory
|
---|
1170 | --------------------------------end of output------------------------------
|
---|
1171 | ...ran with res=256
|
---|
1172 | running: cp -f tmp/i-want-my-lvm /tmp/ > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1173 | --------------------------------start of output-----------------------------
|
---|
1174 | cp: can't stat 'tmp/i-want-my-lvm': No such file or directory
|
---|
1175 | --------------------------------end of output------------------------------
|
---|
1176 | ...ran with res=256
|
---|
1177 | root is mounted at rootfs
|
---|
1178 |
|
---|
1179 | No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
1180 | [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
|
---|
1181 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/cdrom mounted?
|
---|
1182 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cdrom " > /dev/null 2> /dev/null'
|
---|
1183 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#676: NB: CDROM device not mounted, mounting...
|
---|
1184 | running: mount /dev/cdrom /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1185 | --------------------------------start of output-----------------------------
|
---|
1186 | --------------------------------end of output------------------------------
|
---|
1187 | ...ran just fine. :-)
|
---|
1188 | running: umount -d /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1189 | --------------------------------start of output-----------------------------
|
---|
1190 | --------------------------------end of output------------------------------
|
---|
1191 | ...ran just fine. :-)
|
---|
1192 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#684: Re-jigging configuration AGAIN. CD-R, not ISO.
|
---|
1193 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#764: Backup medium is CD-R[W]
|
---|
1194 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#803: Internal tape block size has been custom-set to 32768
|
---|
1195 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#842: differential var = '0'
|
---|
1196 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#846: This is a regular (full) backup
|
---|
1197 | [Main] mondorestore.c->interactive_mode#471: Done loading config file; resizing ML
|
---|
1198 | [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2621: Resizing mountlist
|
---|
1199 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
|
---|
1200 | [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2623: Back from MLoDiM
|
---|
1201 | [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/sda --> -1 or 4125 --> 4125
|
---|
1202 | Expanding entries to suit drive /dev/sda (4125 MB)
|
---|
1203 | [Main] mondo-prep.c->create_mountlist_for_drive#2653: Creating list of partitions for drive /dev/sda
|
---|
1204 | Disk /dev/sda was 4047 MB; is now 4125 MB; Proportionally resizing partitions (factor ~= 1.01913)
|
---|
1205 | Changing /dev/sda1 from 3903763 KB to 3978427 KB
|
---|
1206 | Changing /dev/sda2 from 240964 KB to 245572 KB
|
---|
1207 | Last partition size calculated would be under-allocated, increasing /dev/sda2 from 245572 KB to 245573 KB.
|
---|
1208 | final_size = 4125 MB
|
---|
1209 | Mountlist adjusted to suit current hard drive(s)
|
---|
1210 | [Main] mondorestore.c->interactive_mode#488: About to edit mountlist
|
---|
1211 | [Main] mondo-rstr-newt.c->edit_mountlist#2085: entering eml
|
---|
1212 | [Main] mondo-rstr-newt.c->edit_mountlist#2091: I'm in GUI mode, so I shall edit mountlist using edit_mountlist()
|
---|
1213 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
|
---|
1214 | [Main] libmondo-mountlist.c->evaluate_mountlist#566: Evaluating mountlist...
|
---|
1215 | [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/sda --> -1 or 4125 --> 4125
|
---|
1216 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#413: /dev/sda is 4125 MB
|
---|
1217 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
|
---|
1218 | Found MBR partition table format type
|
---|
1219 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
|
---|
1220 | Found MBR partition table format type
|
---|
1221 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#525: Fine, no error in evaluate_drive_within_mountlist
|
---|
1222 | [Main] mondo-rstr-newt.c->rejig_partition_name_in_raidlist_if_necessary#2634: No need to rejig /dev/sda1 in raidlist: it's not listed.
|
---|
1223 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
|
---|
1224 | [Main] libmondo-mountlist.c->evaluate_mountlist#566: Evaluating mountlist...
|
---|
1225 | [Main] libmondo-devices.c->get_phys_size_of_drive#1040: /dev/sda --> -1 or 4125 --> 4125
|
---|
1226 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#413: /dev/sda is 4125 MB
|
---|
1227 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/sda1 on /dev/sda #0 in mountlist
|
---|
1228 | Found MBR partition table format type
|
---|
1229 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#423: Processing partition /dev/sda2 on /dev/sda #1 in mountlist
|
---|
1230 | Found MBR partition table format type
|
---|
1231 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#515: 386 MB unallocated on /dev/sda.
|
---|
1232 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#525: Fine, no error in evaluate_drive_within_mountlist
|
---|
1233 | [Main] mondo-rstr-newt.c->edit_mountlist_in_newt#2063: You pushed 'OK'. I shall now continue.
|
---|
1234 | [Main] mondo-rstr-newt.c->edit_mountlist#2094: leaving eml
|
---|
1235 | [Main] mondorestore.c->interactive_mode#497: Finished editing mountlist
|
---|
1236 | [Main] mondorestore.c->interactive_mode#501: Proceeding...
|
---|
1237 | [Main] libmondo-mountlist.c->save_mountlist_to_disk#937: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt
|
---|
1238 | [Main] libmondo-raid.c->save_raidlist_to_raidtab#292: Deleting raidtab (no RAID devs anyway)
|
---|
1239 | Restoring Interactively
|
---|
1240 | [Main] mondo-prep.c->partition_everything#1985: partition_everything() --- starting
|
---|
1241 | Partitioning hard drives
|
---|
1242 | Stopping all LVMs, just in case
|
---|
1243 | /tmp/i-want-my-lvm (No such file or directory)
|
---|
1244 | Stopping all software RAID devices, just in case
|
---|
1245 | Done.
|
---|
1246 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#665: Making list of drives
|
---|
1247 | [Main] mondo-prep.c->partition_drive#1533: Partitioning drive /dev/sda
|
---|
1248 | [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/sda1 in mountlist
|
---|
1249 | [Main] mondo-prep.c->partition_drive#1621: Wiping /dev/sda's partition table
|
---|
1250 | [Main] mondo-prep.c->partition_drive#1643: New, kernel-friendly partition remover
|
---|
1251 | [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sda', 1, 0, 'ext4', 3584000) --- starting
|
---|
1252 | [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sda1 (3500 MB)
|
---|
1253 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda1 mounted?
|
---|
1254 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
|
---|
1255 | Found MBR partition table format type
|
---|
1256 | [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing
|
---|
1257 | [Main] mondo-prep.c->partition_device#1870: output = 'n
|
---|
1258 | p
|
---|
1259 | 1
|
---|
1260 |
|
---|
1261 | +3584000K
|
---|
1262 | '
|
---|
1263 | [Main] mondo-prep.c->partition_device#1875: Successfully created partition 1 on /dev/sda
|
---|
1264 | [Main] mondo-prep.c->partition_device#1881: Trying to set partition 1 type now on /dev/sda
|
---|
1265 | [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sda1's type to ext4 (83)
|
---|
1266 | [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving
|
---|
1267 | [Main] mondo-prep.c->partition_drive#1618: Found partition /dev/sda2 in mountlist
|
---|
1268 | [Main] mondo-prep.c->partition_device#1771: partition_device('/dev/sda', 2, 1, 'swap', 245573) --- starting
|
---|
1269 | [Main] mondo-prep.c->partition_device#1790: Partitioning device /dev/sda2 (239 MB)
|
---|
1270 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda2 mounted?
|
---|
1271 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
|
---|
1272 | Found MBR partition table format type
|
---|
1273 | [Main] mondo-prep.c->partition_device#1869: Doing the new all-in-one fdisk thing
|
---|
1274 | [Main] mondo-prep.c->partition_device#1870: output = 'n
|
---|
1275 | p
|
---|
1276 | 2
|
---|
1277 |
|
---|
1278 | +245573K
|
---|
1279 | '
|
---|
1280 | [Main] mondo-prep.c->partition_device#1875: Successfully created partition 2 on /dev/sda
|
---|
1281 | [Main] mondo-prep.c->partition_device#1881: Trying to set partition 2 type now on /dev/sda
|
---|
1282 | [Main] mondo-prep.c->set_partition_type#2140: Setting /dev/sda2's type to swap (82)
|
---|
1283 | [Main] mondo-prep.c->partition_device#1951: partition_device() --- leaving
|
---|
1284 | ------------------- fdisk.log looks like this ------------------
|
---|
1285 |
|
---|
1286 | WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
|
---|
1287 | switch off the mode (command 'c') and change display units to
|
---|
1288 | sectors (command 'u').
|
---|
1289 |
|
---|
1290 | Command (m for help): Partition number (1-4): Value out of range.
|
---|
1291 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1292 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1293 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1294 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1295 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1296 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1297 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1298 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1299 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1300 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1301 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1302 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1303 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1304 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1305 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1306 | Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type
|
---|
1307 |
|
---|
1308 | Command (m for help): Partition number (1-4): Warning: partition 3 has empty type
|
---|
1309 |
|
---|
1310 | Command (m for help): Partition number (1-4):
|
---|
1311 | Command (m for help): Selected partition 1
|
---|
1312 |
|
---|
1313 | Command (m for help): 1: unknown command
|
---|
1314 | Command action
|
---|
1315 | a toggle a bootable flag
|
---|
1316 | b edit bsd disklabel
|
---|
1317 | c toggle the dos compatibility flag
|
---|
1318 | d delete a partition
|
---|
1319 | l list known partition types
|
---|
1320 | m print this menu
|
---|
1321 | n add a new partition
|
---|
1322 | o create a new empty DOS partition table
|
---|
1323 | p print the partition table
|
---|
1324 | q quit without saving changes
|
---|
1325 | s create a new empty Sun disklabel
|
---|
1326 | t change a partition's system id
|
---|
1327 | u change display/entry units
|
---|
1328 | v verify the partition table
|
---|
1329 | w write table to disk and exit
|
---|
1330 | x extra functionality (experts only)
|
---|
1331 |
|
---|
1332 | Command (m for help): n
|
---|
1333 | Command action
|
---|
1334 | e extended
|
---|
1335 | p primary partition (1-4)
|
---|
1336 | p
|
---|
1337 | Partition number (1-4): 1
|
---|
1338 | First cylinder (1-525, default 1):
|
---|
1339 | Using default value 1
|
---|
1340 | Last cylinder, +cylinders or +size{K,M,G} (1-525, default 525): +3584000K
|
---|
1341 |
|
---|
1342 | Command (m for help):
|
---|
1343 | Command (m for help):
|
---|
1344 | Command (m for help): p
|
---|
1345 |
|
---|
1346 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
1347 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
1348 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1349 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
1350 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
1351 | Disk identifier: 0x00076729
|
---|
1352 |
|
---|
1353 | Device Boot Start End Blocks Id System
|
---|
1354 | /dev/sda1 1 447 3590496 83 Linux
|
---|
1355 |
|
---|
1356 | Command (m for help): n
|
---|
1357 | Command action
|
---|
1358 | e extended
|
---|
1359 | p primary partition (1-4)
|
---|
1360 | p
|
---|
1361 | Partition number (1-4): 2
|
---|
1362 | First cylinder (448-525, default 448):
|
---|
1363 | Using default value 448
|
---|
1364 | Last cylinder, +cylinders or +size{K,M,G} (448-525, default 525): +245573K
|
---|
1365 |
|
---|
1366 | Command (m for help):
|
---|
1367 | Command (m for help):
|
---|
1368 | Command (m for help): p
|
---|
1369 |
|
---|
1370 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
1371 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
1372 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1373 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
1374 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
1375 | Disk identifier: 0x00076729
|
---|
1376 |
|
---|
1377 | Device Boot Start End Blocks Id System
|
---|
1378 | /dev/sda1 1 447 3590496 83 Linux
|
---|
1379 | /dev/sda2 448 479 257040 83 Linux
|
---|
1380 |
|
---|
1381 | Command (m for help): t
|
---|
1382 | Partition number (1-4): 2
|
---|
1383 | Hex code (type L to list codes): 82
|
---|
1384 | Changed system type of partition 2 to 82 (Linux swap / Solaris)
|
---|
1385 |
|
---|
1386 | Command (m for help):
|
---|
1387 | Command (m for help): p
|
---|
1388 |
|
---|
1389 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
1390 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
1391 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1392 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
1393 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
1394 | Disk identifier: 0x00076729
|
---|
1395 |
|
---|
1396 | Device Boot Start End Blocks Id System
|
---|
1397 | /dev/sda1 1 447 3590496 83 Linux
|
---|
1398 | /dev/sda2 448 479 257040 82 Linux swap / Solaris
|
---|
1399 |
|
---|
1400 | Command (m for help): p
|
---|
1401 |
|
---|
1402 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
1403 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
1404 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1405 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
1406 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
1407 | Disk identifier: 0x00076729
|
---|
1408 |
|
---|
1409 | Device Boot Start End Blocks Id System
|
---|
1410 | /dev/sda1 1 447 3590496 83 Linux
|
---|
1411 | /dev/sda2 448 479 257040 82 Linux swap / Solaris
|
---|
1412 |
|
---|
1413 | Command (m for help): w
|
---|
1414 | The partition table has been altered!
|
---|
1415 |
|
---|
1416 | Calling ioctl() to re-read partition table.
|
---|
1417 | Syncing disks.
|
---|
1418 |
|
---|
1419 | WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
|
---|
1420 | switch off the mode (command 'c') and change display units to
|
---|
1421 | sectors (command 'u').
|
---|
1422 |
|
---|
1423 | Command (m for help): Partition number (1-4): Value out of range.
|
---|
1424 | Partition number (1-4): Partition number (1-4):
|
---|
1425 | Command (m for help):
|
---|
1426 | Disk /dev/sda: 4325 MB, 4325529600 bytes
|
---|
1427 | 255 heads, 63 sectors/track, 525 cylinders
|
---|
1428 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1429 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
1430 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
1431 | Disk identifier: 0x00076729
|
---|
1432 |
|
---|
1433 | Device Boot Start End Blocks Id System
|
---|
1434 | /dev/sda1 * 1 447 3590496 83 Linux
|
---|
1435 | /dev/sda2 448 479 257040 82 Linux swap / Solaris
|
---|
1436 |
|
---|
1437 | Command (m for help): The partition table has been altered!
|
---|
1438 |
|
---|
1439 | Calling ioctl() to re-read partition table.
|
---|
1440 |
|
---|
1441 | WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
|
---|
1442 | The kernel still uses the old table. The new table will be used at
|
---|
1443 | the next reboot or after you run partprobe(8) or kpartx(8)
|
---|
1444 | Syncing disks.
|
---|
1445 | ------------------- end of fdisk.log... ------------------
|
---|
1446 | Done.
|
---|
1447 | [Main] mondo-prep.c->format_everything#965: format_everything (mountlist, interactively = false
|
---|
1448 | Formatting partitions
|
---|
1449 | [Main] mondo-prep.c->format_everything#977: Stopping all RAID devices
|
---|
1450 | [Main] mondo-prep.c->format_everything#983: Prepare soft-RAIDs
|
---|
1451 | [Main] mondo-prep.c->format_everything#986: Examining /dev/sda1
|
---|
1452 | [Main] mondo-prep.c->format_everything#986: Examining /dev/sda2
|
---|
1453 | [Main] mondo-prep.c->format_everything#1013: Creating LVMs
|
---|
1454 | [Main] mondo-prep.c->format_everything#1052: Formatting regulars
|
---|
1455 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda1 mounted?
|
---|
1456 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
|
---|
1457 | running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext4 -F -q /dev/sda1' > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1458 | --------------------------------start of output-----------------------------
|
---|
1459 | --------------------------------end of output------------------------------
|
---|
1460 | ...ran just fine. :-)
|
---|
1461 | ...OK
|
---|
1462 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda2 mounted?
|
---|
1463 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
|
---|
1464 | running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/sda2' > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1465 | --------------------------------start of output-----------------------------
|
---|
1466 | Setting up swapspace version 1, size = 257036 KiB
|
---|
1467 | no label, UUID=3ef23149-38ea-42e0-bfef-db224b906953
|
---|
1468 | --------------------------------end of output------------------------------
|
---|
1469 | ...ran just fine. :-)
|
---|
1470 | ...OK
|
---|
1471 | Done.
|
---|
1472 | [Main] mondo-prep.c->format_everything#1116: format_everything () - finished successfully
|
---|
1473 | Errors during disk partitioning were handled OK.
|
---|
1474 | Partitions were formatted OK despite those errors.
|
---|
1475 | Mounting devices
|
---|
1476 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda1 mounted?
|
---|
1477 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda1 " > /dev/null 2> /dev/null'
|
---|
1478 | [Main] mondo-rstr-tools.c->mount_device#404: Mounting device /dev/sda1
|
---|
1479 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfattr
|
---|
1480 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfacl
|
---|
1481 | running: mkdir -p /mnt/RESTORING > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1482 | --------------------------------start of output-----------------------------
|
---|
1483 | --------------------------------end of output------------------------------
|
---|
1484 | ...ran just fine. :-)
|
---|
1485 | [Main] mondo-rstr-tools.c->mount_device#433: command='mount -t ext4 /dev/sda1 -o rw /mnt/RESTORING 2>> /var/log/mondorestore.log'
|
---|
1486 | running: mount -t ext4 /dev/sda1 -o rw /mnt/RESTORING 2>> /var/log/mondorestore.log > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1487 | --------------------------------start of output-----------------------------
|
---|
1488 | --------------------------------end of output------------------------------
|
---|
1489 | ...ran just fine. :-)
|
---|
1490 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda2 mounted?
|
---|
1491 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
|
---|
1492 | [Main] mondo-rstr-tools.c->mount_device#404: Mounting device /dev/sda2
|
---|
1493 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfattr
|
---|
1494 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfacl
|
---|
1495 | running: swapon /dev/sda2 > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1496 | --------------------------------start of output-----------------------------
|
---|
1497 | --------------------------------end of output------------------------------
|
---|
1498 | ...ran just fine. :-)
|
---|
1499 | All partitions were mounted OK.
|
---|
1500 | Done.
|
---|
1501 | [Main] mondo-rstr-tools.c->mount_device#404: Mounting device /proc
|
---|
1502 | running: mkdir -p /mnt/RESTORING/proc > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1503 | --------------------------------start of output-----------------------------
|
---|
1504 | --------------------------------end of output------------------------------
|
---|
1505 | ...ran just fine. :-)
|
---|
1506 | [Main] mondo-rstr-tools.c->mount_device#433: command='mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log'
|
---|
1507 | running: mount -t proc /proc /mnt/RESTORING/proc 2>> /var/log/mondorestore.log > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1508 | --------------------------------start of output-----------------------------
|
---|
1509 | --------------------------------end of output------------------------------
|
---|
1510 | ...ran just fine. :-)
|
---|
1511 | [Main] mondo-rstr-tools.c->mount_device#404: Mounting device /sys
|
---|
1512 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfattr
|
---|
1513 | [Main] libmondo-files.c->find_home_of_exe#372: find_home_of_exe() --- Could not find setfacl
|
---|
1514 | running: mkdir -p /mnt/RESTORING/sys > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1515 | --------------------------------start of output-----------------------------
|
---|
1516 | --------------------------------end of output------------------------------
|
---|
1517 | ...ran just fine. :-)
|
---|
1518 | [Main] mondo-rstr-tools.c->mount_device#433: command='mount -t sysfs /sys -o rw /mnt/RESTORING/sys 2>> /var/log/mondorestore.log'
|
---|
1519 | running: mount -t sysfs /sys -o rw /mnt/RESTORING/sys 2>> /var/log/mondorestore.log > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1520 | --------------------------------start of output-----------------------------
|
---|
1521 | --------------------------------end of output------------------------------
|
---|
1522 | ...ran just fine. :-)
|
---|
1523 | running: df -m > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1524 | --------------------------------start of output-----------------------------
|
---|
1525 | Filesystem 1M-blocks Used Available Use Mounted on
|
---|
1526 | none 5 1 5 4 /dev
|
---|
1527 | none 236 0 236 0 /dev/shm
|
---|
1528 | /dev/shm 256 1 256 1 /tmp
|
---|
1529 | /dev/sda1 3452 71 3206 3 /mnt/RESTORING
|
---|
1530 | --------------------------------end of output------------------------------
|
---|
1531 | ...ran just fine. :-)
|
---|
1532 | User opted not to restore any data.
|
---|
1533 | User opted not to initialize the boot loader.
|
---|
1534 | running: touch /mnt/RESTORING/var/log/pacct > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1535 | --------------------------------start of output-----------------------------
|
---|
1536 | touch: /mnt/RESTORING/var/log/pacct: No such file or directory
|
---|
1537 | --------------------------------end of output------------------------------
|
---|
1538 | ...ran with res=256
|
---|
1539 | running: touch /mnt/RESTORING/var/account/pacct > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1540 | --------------------------------start of output-----------------------------
|
---|
1541 | touch: /mnt/RESTORING/var/account/pacct: No such file or directory
|
---|
1542 | --------------------------------end of output------------------------------
|
---|
1543 | ...ran with res=256
|
---|
1544 | running: ls /mnt/RESTORING /tmp > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1545 | --------------------------------start of output-----------------------------
|
---|
1546 | /mnt/RESTORING:
|
---|
1547 | lost+found
|
---|
1548 | proc
|
---|
1549 | sys
|
---|
1550 |
|
---|
1551 | /tmp:
|
---|
1552 | CDROM-LIVES-HERE
|
---|
1553 | FILES-IN-FILELIST
|
---|
1554 | KEYMAP-LIVES-HERE
|
---|
1555 | LAST-FILELIST-NUMBER
|
---|
1556 | USE-UDEV
|
---|
1557 | USING-COMP
|
---|
1558 | biggielist.txt
|
---|
1559 | filelist.full.gz
|
---|
1560 | fstab
|
---|
1561 | groovy-stuff
|
---|
1562 | isodir
|
---|
1563 | mondo-restore.cfg
|
---|
1564 | mondo-restore.log
|
---|
1565 | mount.log
|
---|
1566 | mountlist.changed
|
---|
1567 | mountlist.original
|
---|
1568 | mountlist.txt
|
---|
1569 | mountlist.txt.orig
|
---|
1570 | myssh
|
---|
1571 | null
|
---|
1572 | oid.log
|
---|
1573 | oid1.log
|
---|
1574 | prep.sh
|
---|
1575 | stderr
|
---|
1576 | stdin
|
---|
1577 | stdout
|
---|
1578 | tmpfs
|
---|
1579 | --------------------------------end of output------------------------------
|
---|
1580 | ...ran just fine. :-)
|
---|
1581 | running: mkdir -p /mnt/RESTORING/var/run/console > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1582 | --------------------------------start of output-----------------------------
|
---|
1583 | --------------------------------end of output------------------------------
|
---|
1584 | ...ran just fine. :-)
|
---|
1585 | running: chmod 777 /mnt/RESTORING/dev/null > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1586 | --------------------------------start of output-----------------------------
|
---|
1587 | chmod: /mnt/RESTORING/dev/null: No such file or directory
|
---|
1588 | --------------------------------end of output------------------------------
|
---|
1589 | ...ran with res=256
|
---|
1590 | running: cd /mnt/RESTORING; for i in `ls home/`; do echo "Moving $i's spurious files to $i/.disabled"; mkdir "$i"/.disabled ; mv -f "$i"/.DCOP* "$i"/.MCOP* "$i"/.*authority "$i"/.kde/tmp* "$i"/.kde/socket* "$i"/.disabled/ ; done > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1591 | --------------------------------start of output-----------------------------
|
---|
1592 | ls: home/: No such file or directory
|
---|
1593 | --------------------------------end of output------------------------------
|
---|
1594 | ...ran just fine. :-)
|
---|
1595 | running: rm -f /mnt/RESTORING/var/run/*.pid > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1596 | --------------------------------start of output-----------------------------
|
---|
1597 | --------------------------------end of output------------------------------
|
---|
1598 | ...ran just fine. :-)
|
---|
1599 | running: rm -f /mnt/RESTORING/var/lock/subsys/* > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1600 | --------------------------------start of output-----------------------------
|
---|
1601 | --------------------------------end of output------------------------------
|
---|
1602 | ...ran just fine. :-)
|
---|
1603 | running: df -m > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1604 | --------------------------------start of output-----------------------------
|
---|
1605 | Filesystem 1M-blocks Used Available Use Mounted on
|
---|
1606 | none 5 1 5 4 /dev
|
---|
1607 | none 236 0 236 0 /dev/shm
|
---|
1608 | /dev/shm 256 1 256 1 /tmp
|
---|
1609 | /dev/sda1 3452 71 3206 3 /mnt/RESTORING
|
---|
1610 | --------------------------------end of output------------------------------
|
---|
1611 | ...ran just fine. :-)
|
---|
1612 | Unmounting devices
|
---|
1613 | running: ps | grep buffer | grep -v "grep buffer" > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1614 | --------------------------------start of output-----------------------------
|
---|
1615 | --------------------------------end of output------------------------------
|
---|
1616 | ...ran with res=256
|
---|
1617 | running: cp -f /var/log/mondorestore.log /mnt/RESTORING/var/log > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1618 | --------------------------------start of output-----------------------------
|
---|
1619 | --------------------------------end of output------------------------------
|
---|
1620 | ...ran just fine. :-)
|
---|
1621 | running: umount /mnt/RESTORING/proc > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1622 | --------------------------------start of output-----------------------------
|
---|
1623 | --------------------------------end of output------------------------------
|
---|
1624 | ...ran just fine. :-)
|
---|
1625 | running: umount /mnt/RESTORING/sys > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1626 | --------------------------------start of output-----------------------------
|
---|
1627 | --------------------------------end of output------------------------------
|
---|
1628 | ...ran just fine. :-)
|
---|
1629 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda2 mounted?
|
---|
1630 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/sda2 " > /dev/null 2> /dev/null'
|
---|
1631 | running: swapoff /dev/sda2 > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1632 | --------------------------------start of output-----------------------------
|
---|
1633 | --------------------------------end of output------------------------------
|
---|
1634 | ...ran just fine. :-)
|
---|
1635 | [Main] mondo-rstr-tools.c->unmount_all_devices#2045: Unmounting device /dev/sda2
|
---|
1636 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /dev/sda1 mounted?
|
---|
1637 | running: mkdir -p /mnt/RESTORING/var/lock > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1638 | --------------------------------start of output-----------------------------
|
---|
1639 | --------------------------------end of output------------------------------
|
---|
1640 | ...ran just fine. :-)
|
---|
1641 | running: mkdir -p /mnt/RESTORING/var/run > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1642 | --------------------------------start of output-----------------------------
|
---|
1643 | --------------------------------end of output------------------------------
|
---|
1644 | ...ran just fine. :-)
|
---|
1645 | running: umount /mnt/RESTORING/ > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1646 | --------------------------------start of output-----------------------------
|
---|
1647 | --------------------------------end of output------------------------------
|
---|
1648 | ...ran just fine. :-)
|
---|
1649 | [Main] mondo-rstr-tools.c->unmount_all_devices#2045: Unmounting device /dev/sda1
|
---|
1650 | Done.
|
---|
1651 | All partitions were unmounted OK.
|
---|
1652 | [Main] mondorestore.c->interactive_mode#676: About to leave interactive_mode()
|
---|
1653 | [Main] mondorestore.c->interactive_mode#686: Leaving interactive_mode()
|
---|
1654 | running: sync > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1655 | --------------------------------start of output-----------------------------
|
---|
1656 | --------------------------------end of output------------------------------
|
---|
1657 | ...ran just fine. :-)
|
---|
1658 | [Main] libmondo-devices.c->is_this_device_mounted#1139: Is /mnt/cdrom mounted?
|
---|
1659 | [Main] libmondo-devices.c->is_this_device_mounted#1168: tmp (command) = 'cat /proc/swaps | grep -E "^/mnt/cdrom " > /dev/null 2> /dev/null'
|
---|
1660 | [Main] libmondo-devices.c->eject_device#254: Ejecting /dev/cdrom
|
---|
1661 | running: eject /dev/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1662 | --------------------------------start of output-----------------------------
|
---|
1663 | --------------------------------end of output------------------------------
|
---|
1664 | ...ran just fine. :-)
|
---|
1665 | Run complete. Please remove media and reboot.
|
---|
1666 | [Main] mondorestore.c->main#3231: No post-nuke found.
|
---|
1667 | Restore log (/var/log/mondorestore.log) copied to /var/log on your hard disk
|
---|
1668 | Mondo-restore is exiting (retval=0)
|
---|
1669 | root is mounted at rootfs
|
---|
1670 |
|
---|
1671 | No, Schlomo, that doesn't mean rootfs is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
1672 | [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#166: Is this a ramdisk? result = 1
|
---|
1673 | running: mount / -o remount,rw > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1674 | --------------------------------start of output-----------------------------
|
---|
1675 | --------------------------------end of output------------------------------
|
---|
1676 | ...ran just fine. :-)
|
---|
1677 | running: umount -d /mnt/cdrom > //mondo.tmp.28Mt2h/mondo-run-prog-thing.tmp 2> //mondo.tmp.28Mt2h/mondo-run-prog-thing.err
|
---|
1678 | --------------------------------start of output-----------------------------
|
---|
1679 | Command failed (Invalid argument)
|
---|
1680 | --------------------------------end of output------------------------------
|
---|
1681 | ...ran with res=256
|
---|
1682 | [Main] ../common/newt-specific.c->finish#432: Calling newtFinished()
|
---|
1683 | 10:59 Launching Shell
|
---|
1684 | 10:59 Launching Shell
|
---|