1 | 08:01 Extracted additional /dev entries OK.
|
---|
2 | 08:01 Engaging /proc/driver/cciss/cciss0
|
---|
3 | 08:01 ...result=0
|
---|
4 | 08:01 Trying 'mount /dev/shm -t tmpfs -o size=64m'
|
---|
5 | 08:01 Great. Pivot succeeded w/ size=64m
|
---|
6 | 08:01 Successfully mounted dynamic /tmp ramdisk
|
---|
7 | 08:01 find-and-mount-cdrom --- starting
|
---|
8 | 08:01 Trying /dev/hda
|
---|
9 | 08:01 It's not in /dev/hda; I'll keep looking
|
---|
10 | 08:01 Trying /dev/hdb
|
---|
11 | 08:01 It's not in /dev/hdb; I'll keep looking
|
---|
12 | 08:01 Trying /dev/hdc
|
---|
13 | 08:01 It's not in /dev/hdc; I'll keep looking
|
---|
14 | 08:01 Trying /dev/hdd
|
---|
15 | 08:01 It's not in /dev/hdd; I'll keep looking
|
---|
16 | 08:01 Trying /dev/hde
|
---|
17 | 08:01 It's not in /dev/hde; I'll keep looking
|
---|
18 | 08:01 Trying /dev/hdf
|
---|
19 | 08:01 It's not in /dev/hdf; I'll keep looking
|
---|
20 | 08:01 Trying /dev/hdg
|
---|
21 | 08:01 It's not in /dev/hdg; I'll keep looking
|
---|
22 | 08:01 Trying /dev/hdh
|
---|
23 | 08:01 It's not in /dev/hdh; I'll keep looking
|
---|
24 | 08:01 Trying /dev/scd0
|
---|
25 | 08:01 /dev/scd0 has a CD-ROM in it
|
---|
26 | 08:01 CD-ROM found at /dev/scd0
|
---|
27 | 08:01 /dev/scd0 is where the Mondo CD lives.
|
---|
28 | 08:01 CD-ROM found and mounted at /dev/scd0
|
---|
29 | 08:01 find-and-mount-cdrom --- leaving (0)
|
---|
30 | 08:01 OK, I am running on a CD-ROM. Good.
|
---|
31 | 08:01 Starting install-additional-tools
|
---|
32 | 08:01 PLEASE WAIT. Untarring data content
|
---|
33 | 08:01 Populating / with tar file content...
|
---|
34 | 08:01 Done.
|
---|
35 | 08:01 Exiting install-additional-tools
|
---|
36 | 08:01 klogd and syslogd have been started.
|
---|
37 | 08:01 RAID controller(s) detected. Pausing 10 seconds to let them warm up.
|
---|
38 | 08:01 Running 'mdadm'
|
---|
39 | 08:01 Scanning LVM's...
|
---|
40 | 08:02 LVM's have been started.
|
---|
41 | 08:02 OK, we've found /mnt/cdrom/archives/*; great.
|
---|
42 | 08:02 Re-jigging mondo-restore.cfg because you backed up to ISOs and then burned them to CDs
|
---|
43 | 08:02 Done re-jigging. Yay.
|
---|
44 | 08:02 init (from mindi v2.0.6-r2153)
|
---|
45 | 08:02 /proc/cmdline is:
|
---|
46 | initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=81920 nuke devfs=nomount noresume selinux=0 barrier=off ramdisk_blocksize=1024 BOOT_IMAGE=/vmlinuz denymods=fdomain
|
---|
47 | 08:02 df result:
|
---|
48 | 08:02 ----------
|
---|
49 | Filesystem 1K-blocks Used Available Use% Mounted on
|
---|
50 | rootfs 76767 39496 36452 53% /
|
---|
51 | /dev/root 76767 39496 36452 53% /
|
---|
52 | none 5120 84 5036 2% /dev
|
---|
53 | none 16481572 0 16481572 0% /dev/shm
|
---|
54 | /dev/shm 65536 708 64828 2% /tmp
|
---|
55 | /dev/scd0 1107848 1107848 0 100% /mnt/cdrom
|
---|
56 | 08:02 -------------
|
---|
57 | 08:02 mount result:
|
---|
58 | 08:02 -------------
|
---|
59 | rootfs on / type rootfs (rw)
|
---|
60 | /dev/root on / type ext2 (rw,nogrpid)
|
---|
61 | /proc/ on /proc type proc (rw)
|
---|
62 | /sys/ on /sys type sysfs (rw)
|
---|
63 | none on /dev type tmpfs (rw)
|
---|
64 | none on /dev/pts type devpts (rw)
|
---|
65 | none on /dev/shm type tmpfs (rw)
|
---|
66 | /dev/shm on /tmp type tmpfs (rw)
|
---|
67 | /dev/scd0 on /mnt/cdrom type iso9660 (ro)
|
---|
68 | 08:02 -------------
|
---|
69 | 08:02 lsmod result:
|
---|
70 | 08:02 -------------
|
---|
71 | Module Size Used by
|
---|
72 | crc16 18816 0
|
---|
73 | msdos 27136 0
|
---|
74 | vfat 30336 0
|
---|
75 | fat 69552 2 msdos,vfat
|
---|
76 | nfsd 270216 0
|
---|
77 | ext3 153360 0
|
---|
78 | jbd 84544 1 ext3
|
---|
79 | jfs 181328 0
|
---|
80 | xfs 540616 0
|
---|
81 | reiserfs 247040 0
|
---|
82 | fuse 63024 0
|
---|
83 | iptable_filter 19712 0
|
---|
84 | ip_tables 31048 1 iptable_filter
|
---|
85 | x_tables 31112 1 ip_tables
|
---|
86 | joydev 27520 0
|
---|
87 | raw 24848 0
|
---|
88 | ipmi_devintf 27024 0
|
---|
89 | ipmi_msghandler 47476 1 ipmi_devintf
|
---|
90 | hw_random 22568 0
|
---|
91 | shpchp 61984 0
|
---|
92 | pci_hotplug 44800 1 shpchp
|
---|
93 | linear 21888 0
|
---|
94 | raid0 24064 0
|
---|
95 | raid1 39808 0
|
---|
96 | raid10 38912 0
|
---|
97 | raid5 41856 0
|
---|
98 | xor 22416 1 raid5
|
---|
99 | dm_snapshot 34248 0
|
---|
100 | dm_zero 18816 0
|
---|
101 | dm_mirror 43392 0
|
---|
102 | dm_round_robin 20096 1
|
---|
103 | dm_emc 23168 0
|
---|
104 | dm_hp_sw 20224 0
|
---|
105 | dm_rdac 24832 0
|
---|
106 | dm_multipath 42512 5 dm_round_robin,dm_emc,dm_hp_sw,dm_rdac
|
---|
107 | dm_mod 80400 13 dm_snapshot,dm_zero,dm_mirror,dm_multipath
|
---|
108 | multipath 25216 0
|
---|
109 | bonding 102144 0
|
---|
110 | button 24352 0
|
---|
111 | battery 27528 0
|
---|
112 | ac 22152 0
|
---|
113 | fan 21896 0
|
---|
114 | thermal 32400 0
|
---|
115 | processor 53100 1 thermal
|
---|
116 | piix 28164 0 [permanent]
|
---|
117 | nls_utf8 18688 1
|
---|
118 | nls_cp437 23552 0
|
---|
119 | nls_iso8859_1 21760 0
|
---|
120 | exportfs 22400 1 nfsd
|
---|
121 | nfs 234296 0
|
---|
122 | lockd 89456 2 nfsd,nfs
|
---|
123 | nfs_acl 20224 2 nfsd,nfs
|
---|
124 | af_packet 56460 0
|
---|
125 | sunrpc 174024 4 nfsd,nfs,lockd,nfs_acl
|
---|
126 | intermodule 20868 0
|
---|
127 | forcedeth 43780 0
|
---|
128 | 8139too 45184 0
|
---|
129 | 8139cp 40832 0
|
---|
130 | pcnet32 48260 0
|
---|
131 | libphy 35968 0
|
---|
132 | tg3 132996 0
|
---|
133 | ne2k_pci 28768 0
|
---|
134 | 8390 27136 1 ne2k_pci
|
---|
135 | eepro100 50192 0
|
---|
136 | e1000 211528 0
|
---|
137 | bnx2 201736 0
|
---|
138 | e100 54416 0
|
---|
139 | 3c59x 64308 0
|
---|
140 | mii 22400 6 8139too,8139cp,pcnet32,eepro100,e100,3c59x
|
---|
141 | raw1394 43160 0
|
---|
142 | ieee1394 120056 1 raw1394
|
---|
143 | mptctl 47112 0
|
---|
144 | mptfc 35976 0
|
---|
145 | mptspi 38416 0
|
---|
146 | mptsas 52112 0
|
---|
147 | mptscsih 54400 3 mptfc,mptspi,mptsas
|
---|
148 | mptbase 95204 5 mptctl,mptfc,mptspi,mptsas,mptscsih
|
---|
149 | i2o_block 30240 0
|
---|
150 | i2o_core 62520 1 i2o_block
|
---|
151 | ohci_hcd 38148 0
|
---|
152 | ehci_hcd 49288 0
|
---|
153 | uhci_hcd 49440 0
|
---|
154 | usb_storage 101440 0
|
---|
155 | dock 26896 0
|
---|
156 | sata_promise 32004 0
|
---|
157 | pata_marvell 24320 0
|
---|
158 | sata_nv 38408 0
|
---|
159 | ahci 46216 0
|
---|
160 | ata_piix 34308 1
|
---|
161 | libata 145832 5 sata_promise,pata_marvell,sata_nv,ahci,ata_piix
|
---|
162 | edd 26760 0
|
---|
163 | loop 33168 0
|
---|
164 | cciss 87944 2
|
---|
165 | serverworks 25488 0 [permanent]
|
---|
166 | sis5513 30352 0 [permanent]
|
---|
167 | amd74xx 31920 0 [permanent]
|
---|
168 | cmd64x 27596 0 [permanent]
|
---|
169 | generic 21892 0 [permanent]
|
---|
170 | via82cxxx 25348 0 [permanent]
|
---|
171 | pcmcia_core 59300 0
|
---|
172 | ide_cd 57760 0
|
---|
173 | ide_disk 32768 0
|
---|
174 | ide_floppy 34304 0
|
---|
175 | ide_tape 51904 0
|
---|
176 | tmscsim 38080 0
|
---|
177 | sym53c8xx 91428 0
|
---|
178 | sr_mod 33060 1
|
---|
179 | cdrom 52520 2 ide_cd,sr_mod
|
---|
180 | sg 53304 0
|
---|
181 | sd_mod 37760 0
|
---|
182 | scsi_transport_sas 49536 1 mptsas
|
---|
183 | qlogicfas408 24192 0
|
---|
184 | scsi_transport_fc 57356 1 mptfc
|
---|
185 | qla1280 134672 0
|
---|
186 | megaraid_sas 55228 0
|
---|
187 | megaraid_mbox 49424 0
|
---|
188 | megaraid_mm 28216 1 megaraid_mbox
|
---|
189 | megaraid 57160 0
|
---|
190 | iscsi_tcp 38276 0
|
---|
191 | libiscsi 47488 1 iscsi_tcp
|
---|
192 | scsi_transport_iscsi 51480 2 iscsi_tcp,libiscsi
|
---|
193 | ide_scsi 34568 0
|
---|
194 | ide_core 166148 13 piix,usb_storage,serverworks,sis5513,amd74xx,cmd64x,generic,via82cxxx,ide_cd,ide_disk,ide_floppy,ide_tape,ide_scsi
|
---|
195 | dmx3191d 29184 0
|
---|
196 | BusLogic 41280 0
|
---|
197 | atp870u 45056 0
|
---|
198 | aic7xxx 176184 0
|
---|
199 | aic79xx 254552 0
|
---|
200 | scsi_transport_spi 43136 5 mptspi,sym53c8xx,dmx3191d,aic7xxx,aic79xx
|
---|
201 | aacraid 84612 0
|
---|
202 | 3w_9xxx 51076 0
|
---|
203 | 3w_xxxx 43552 0
|
---|
204 | osst 68400 0
|
---|
205 | st 55204 0
|
---|
206 | scsi_mod 170936 37 dm_hp_sw,dm_rdac,mptctl,mptfc,mptspi,mptsas,mptscsih,usb_storage,ahci,libata,cciss,tmscsim,sym53c8xx,sr_mod,sg,sd_mod,scsi_transport_sas,scsi_transport_fc,qla1280,megaraid_sas,megaraid_mbox,megaraid,iscsi_tcp,libiscsi,scsi_transport_iscsi,ide_scsi,dmx3191d,BusLogic,atp870u,aic7xxx,aic79xx,scsi_transport_spi,aacraid,3w_9xxx,3w_xxxx,osst,st
|
---|
207 | usbhid 61088 0
|
---|
208 | usbcore 150312 6 ohci_hcd,ehci_hcd,uhci_hcd,usb_storage,usbhid
|
---|
209 | 08:02 -------------
|
---|
210 | 08:02 dmesg result:
|
---|
211 | 08:02 -------------
|
---|
212 | imm: Unknown symbol parport_register_device
|
---|
213 | imm: Unknown symbol parport_register_driver
|
---|
214 | imm: Unknown symbol parport_release
|
---|
215 | imm: Unknown symbol parport_claim
|
---|
216 | imm: Unknown symbol parport_unregister_device
|
---|
217 | imm: Unknown symbol parport_unregister_driver
|
---|
218 | initio: module not supported by Novell, setting U taint flag.
|
---|
219 | Loading iSCSI transport class v2.0-724.
|
---|
220 | iscsi: registered transport (tcp)
|
---|
221 | megaraid cmm: 2.20.2.8 (Release Date: Tue Dec 18 12:12:25 PST 2007)
|
---|
222 | megaraid: 2.20.5.2 (Release Date: Tue Dec 18 12:12:25 PST 2007)
|
---|
223 | megasas: 00.00.03.15-SL1 Thu Nov. 01 13:32:21 PDT 2007
|
---|
224 | ppa: Unknown symbol parport_register_device
|
---|
225 | ppa: Unknown symbol parport_register_driver
|
---|
226 | ppa: Unknown symbol parport_release
|
---|
227 | ppa: Unknown symbol parport_claim
|
---|
228 | ppa: Unknown symbol parport_unregister_device
|
---|
229 | ppa: Unknown symbol parport_unregister_driver
|
---|
230 | qla2xxx: Unknown symbol release_firmware
|
---|
231 | qla2xxx: Unknown symbol request_firmware
|
---|
232 | ide_tape: module not supported by Novell, setting U taint flag.
|
---|
233 | ide-floppy driver 0.99.newide
|
---|
234 | pcmcia: Unknown symbol release_firmware
|
---|
235 | pcmcia: Unknown symbol request_firmware
|
---|
236 | ide_cs: Unknown symbol cs_error
|
---|
237 | ide_cs: Unknown symbol pcmcia_get_first_tuple
|
---|
238 | ide_cs: Unknown symbol pcmcia_unregister_driver
|
---|
239 | ide_cs: Unknown symbol pcmcia_get_tuple_data
|
---|
240 | ide_cs: Unknown symbol pcmcia_get_next_tuple
|
---|
241 | ide_cs: Unknown symbol pcmcia_get_configuration_info
|
---|
242 | ide_cs: Unknown symbol pcmcia_request_io
|
---|
243 | ide_cs: Unknown symbol pcmcia_request_configuration
|
---|
244 | ide_cs: Unknown symbol pcmcia_release_configuration
|
---|
245 | ide_cs: Unknown symbol pcmcia_parse_tuple
|
---|
246 | ide_cs: Unknown symbol pcmcia_release_io
|
---|
247 | ide_cs: Unknown symbol pcmcia_register_driver
|
---|
248 | ide_cs: Unknown symbol pcmcia_release_irq
|
---|
249 | ide_cs: Unknown symbol pcmcia_request_irq
|
---|
250 | Floppy drive(s): fd0 is 1.44M
|
---|
251 | floppy0: no floppy controllers found
|
---|
252 | paride: module not supported by Novell, setting U taint flag.
|
---|
253 | paride: Unknown symbol parport_register_device
|
---|
254 | paride: Unknown symbol parport_release
|
---|
255 | paride: Unknown symbol parport_claim
|
---|
256 | paride: Unknown symbol parport_unregister_device
|
---|
257 | paride: Unknown symbol parport_find_base
|
---|
258 | paride: Unknown symbol parport_put_port
|
---|
259 | cciss: module not supported by Novell, setting U taint flag.
|
---|
260 | HP CISS Driver (v 3.6.18-17)
|
---|
261 | cciss: Device 0x3230 has been found at bus 6 dev 0 func 0
|
---|
262 | ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
|
---|
263 | cciss/c0d0: p1 p2 p3
|
---|
264 | cciss/c0d1: p1
|
---|
265 | loop: loaded (max 8 devices)
|
---|
266 | BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
|
---|
267 | libata version 2.00 loaded.
|
---|
268 | ata_piix 0000:00:1f.1: version 2.00ac7
|
---|
269 | ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 177
|
---|
270 | PCI: Setting latency timer of device 0000:00:1f.1 to 64
|
---|
271 | ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x500 irq 14
|
---|
272 | ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
|
---|
273 | scsi0 : ata_piix
|
---|
274 | ata1.00: ATAPI, max UDMA/33
|
---|
275 | ata1.00: configured for UDMA/33
|
---|
276 | scsi1 : ata_piix
|
---|
277 | ATA: abnormal status 0x7F on port 0x177
|
---|
278 | Vendor: TEAC Model: DW-224E-V Rev: C.CC
|
---|
279 | Type: CD-ROM ANSI SCSI revision: 05
|
---|
280 | sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
|
---|
281 | Uniform CD-ROM driver Revision: 3.20
|
---|
282 | sr 0:0:0:0: Attached scsi CD-ROM sr0
|
---|
283 | sr 0:0:0:0: Attached scsi generic sg0 type 5
|
---|
284 | No dock devices found.
|
---|
285 | Initializing USB Mass Storage driver...
|
---|
286 | usbcore: registered new driver usb-storage
|
---|
287 | USB Mass Storage support registered.
|
---|
288 | USB Universal Host Controller Interface driver v2.3
|
---|
289 | ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
|
---|
290 | PCI: Setting latency timer of device 0000:00:1d.0 to 64
|
---|
291 | uhci_hcd 0000:00:1d.0: UHCI Host Controller
|
---|
292 | uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
|
---|
293 | uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000
|
---|
294 | usb usb1: new device found, idVendor=0000, idProduct=0000
|
---|
295 | usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
296 | usb usb1: Product: UHCI Host Controller
|
---|
297 | usb usb1: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd
|
---|
298 | usb usb1: SerialNumber: 0000:00:1d.0
|
---|
299 | usb usb1: configuration #1 chosen from 1 choice
|
---|
300 | hub 1-0:1.0: USB hub found
|
---|
301 | hub 1-0:1.0: 2 ports detected
|
---|
302 | ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
|
---|
303 | PCI: Setting latency timer of device 0000:00:1d.1 to 64
|
---|
304 | uhci_hcd 0000:00:1d.1: UHCI Host Controller
|
---|
305 | uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
|
---|
306 | uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020
|
---|
307 | usb usb2: new device found, idVendor=0000, idProduct=0000
|
---|
308 | usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
309 | usb usb2: Product: UHCI Host Controller
|
---|
310 | usb usb2: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd
|
---|
311 | usb usb2: SerialNumber: 0000:00:1d.1
|
---|
312 | usb usb2: configuration #1 chosen from 1 choice
|
---|
313 | hub 2-0:1.0: USB hub found
|
---|
314 | hub 2-0:1.0: 2 ports detected
|
---|
315 | ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
|
---|
316 | PCI: Setting latency timer of device 0000:00:1d.2 to 64
|
---|
317 | uhci_hcd 0000:00:1d.2: UHCI Host Controller
|
---|
318 | uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
|
---|
319 | uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001040
|
---|
320 | usb usb3: new device found, idVendor=0000, idProduct=0000
|
---|
321 | usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
322 | usb usb3: Product: UHCI Host Controller
|
---|
323 | usb usb3: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd
|
---|
324 | usb usb3: SerialNumber: 0000:00:1d.2
|
---|
325 | usb usb3: configuration #1 chosen from 1 choice
|
---|
326 | hub 3-0:1.0: USB hub found
|
---|
327 | hub 3-0:1.0: 2 ports detected
|
---|
328 | GSI 19 sharing vector 0x72 and IRQ 19
|
---|
329 | ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 114
|
---|
330 | PCI: Setting latency timer of device 0000:00:1d.3 to 64
|
---|
331 | uhci_hcd 0000:00:1d.3: UHCI Host Controller
|
---|
332 | uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
|
---|
333 | uhci_hcd 0000:00:1d.3: irq 114, io base 0x00001060
|
---|
334 | usb usb4: new device found, idVendor=0000, idProduct=0000
|
---|
335 | usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
336 | usb usb4: Product: UHCI Host Controller
|
---|
337 | usb usb4: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd
|
---|
338 | usb usb4: SerialNumber: 0000:00:1d.3
|
---|
339 | usb usb4: configuration #1 chosen from 1 choice
|
---|
340 | hub 4-0:1.0: USB hub found
|
---|
341 | hub 4-0:1.0: 2 ports detected
|
---|
342 | GSI 20 sharing vector 0x7A and IRQ 20
|
---|
343 | ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 122
|
---|
344 | uhci_hcd 0000:01:04.4: UHCI Host Controller
|
---|
345 | uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
|
---|
346 | uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
|
---|
347 | uhci_hcd 0000:01:04.4: irq 122, io base 0x00003800
|
---|
348 | usb usb5: new device found, idVendor=0000, idProduct=0000
|
---|
349 | usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
350 | usb usb5: Product: UHCI Host Controller
|
---|
351 | usb usb5: Manufacturer: Linux 2.6.16.60-0.21-smp uhci_hcd
|
---|
352 | usb usb5: SerialNumber: 0000:01:04.4
|
---|
353 | usb usb5: configuration #1 chosen from 1 choice
|
---|
354 | hub 5-0:1.0: USB hub found
|
---|
355 | hub 5-0:1.0: 2 ports detected
|
---|
356 | ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
|
---|
357 | PCI: Setting latency timer of device 0000:00:1d.7 to 64
|
---|
358 | ehci_hcd 0000:00:1d.7: EHCI Host Controller
|
---|
359 | ehci_hcd 0000:00:1d.7: debug port 1
|
---|
360 | PCI: cache line size of 32 is not supported by device 0000:00:1d.7
|
---|
361 | ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
|
---|
362 | ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf7df0000
|
---|
363 | ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
|
---|
364 | usb usb6: new device found, idVendor=0000, idProduct=0000
|
---|
365 | usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
|
---|
366 | usb usb6: Product: EHCI Host Controller
|
---|
367 | usb usb6: Manufacturer: Linux 2.6.16.60-0.21-smp ehci_hcd
|
---|
368 | usb usb6: SerialNumber: 0000:00:1d.7
|
---|
369 | usb usb6: configuration #1 chosen from 1 choice
|
---|
370 | hub 6-0:1.0: USB hub found
|
---|
371 | hub 6-0:1.0: 8 ports detected
|
---|
372 | ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
|
---|
373 | yenta_socket: Unknown symbol pccard_nonstatic_ops
|
---|
374 | pcmcia: Unknown symbol release_firmware
|
---|
375 | pcmcia: Unknown symbol request_firmware
|
---|
376 | I2O subsystem v1.325
|
---|
377 | i2o: max drivers = 8
|
---|
378 | i2o_block: module not supported by Novell, setting U taint flag.
|
---|
379 | I2O Block Device OSM v1.325
|
---|
380 | block-osm: registered device at major 80
|
---|
381 | Fusion MPT base driver 3.04.06-suse
|
---|
382 | Copyright (c) 1999-2007 LSI Corporation
|
---|
383 | Fusion MPT SAS Host driver 3.04.06-suse
|
---|
384 | Fusion MPT SPI Host driver 3.04.06-suse
|
---|
385 | Fusion MPT FC Host driver 3.04.06-suse
|
---|
386 | Fusion MPT misc device (ioctl) driver 3.04.06-suse
|
---|
387 | mptctl: Registered with Fusion MPT base driver
|
---|
388 | mptctl: /dev/mptctl @ (major,minor=10,220)
|
---|
389 | ieee1394: Initialized config rom entry `ip1394'
|
---|
390 | ieee1394: raw1394: /dev/raw1394 device initialized
|
---|
391 | e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
|
---|
392 | e100: Copyright(c) 1999-2005 Intel Corporation
|
---|
393 | Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.7c (November 15, 2007)
|
---|
394 | ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185
|
---|
395 | usb 5-1: new full speed USB device using uhci_hcd and address 2
|
---|
396 | usb 5-1: new device found, idVendor=03f0, idProduct=1027
|
---|
397 | usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0
|
---|
398 | usb 5-1: Product: Virtual Keyboard
|
---|
399 | usb 5-1: Manufacturer: HP
|
---|
400 | usb 5-1: configuration #1 chosen from 1 choice
|
---|
401 | input: HP Virtual Keyboard as /class/input/input3
|
---|
402 | input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
|
---|
403 | input: HP Virtual Keyboard as /class/input/input4
|
---|
404 | input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
|
---|
405 | usb 5-2: new full speed USB device using uhci_hcd and address 3
|
---|
406 | eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 185, node addr 0022649836ac
|
---|
407 | ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 114
|
---|
408 | usb 5-2: new device found, idVendor=03f0, idProduct=1327
|
---|
409 | usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
|
---|
410 | usb 5-2: Product: Virtual Hub
|
---|
411 | usb 5-2: Manufacturer: HP
|
---|
412 | usb 5-2: configuration #1 chosen from 1 choice
|
---|
413 | hub 5-2:1.0: USB hub found
|
---|
414 | hub 5-2:1.0: 7 ports detected
|
---|
415 | eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 114, node addr 00226498365e
|
---|
416 | Intel(R) PRO/1000 Network Driver - version 7.6.9.1-NAPI
|
---|
417 | Copyright (c) 1999-2007 Intel Corporation.
|
---|
418 | eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
|
---|
419 | eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
|
---|
420 | ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
|
---|
421 | http://www.scyld.com/network/ne2k-pci.html
|
---|
422 | Generic PHY: Registered new driver
|
---|
423 | pcnet32.c:v1.31c 01.Nov.2005 tsbogend@alpha.franken.de
|
---|
424 | 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
|
---|
425 | 8139too Fast Ethernet driver 0.9.27
|
---|
426 | forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
|
---|
427 | NET: Registered protocol family 17
|
---|
428 | cciss0: No device changes detected.
|
---|
429 | cciss0: No appropriate SCSI device detected, SCSI subsystem not engaged.
|
---|
430 | ISO 9660 Extensions: Microsoft Joliet Level 3
|
---|
431 | ISO 9660 Extensions: RRIP_1991A
|
---|
432 | ISO 9660 Extensions: Microsoft Joliet Level 3
|
---|
433 | ISO 9660 Extensions: RRIP_1991A
|
---|
434 | GDT-HA: Storage RAID Controller Driver. Version: 3.05
|
---|
435 | GDT-HA: Found 0 PCI Storage RAID Controllers
|
---|
436 | imm: Unknown symbol parport_register_device
|
---|
437 | imm: Unknown symbol parport_register_driver
|
---|
438 | imm: Unknown symbol parport_release
|
---|
439 | imm: Unknown symbol parport_claim
|
---|
440 | imm: Unknown symbol parport_unregister_device
|
---|
441 | imm: Unknown symbol parport_unregister_driver
|
---|
442 | initio: module not supported by Novell, setting U taint flag.
|
---|
443 | ppa: Unknown symbol parport_register_device
|
---|
444 | ppa: Unknown symbol parport_register_driver
|
---|
445 | ppa: Unknown symbol parport_release
|
---|
446 | ppa: Unknown symbol parport_claim
|
---|
447 | ppa: Unknown symbol parport_unregister_device
|
---|
448 | ppa: Unknown symbol parport_unregister_driver
|
---|
449 | qla2xxx: Unknown symbol release_firmware
|
---|
450 | qla2xxx: Unknown symbol request_firmware
|
---|
451 | pcmcia: Unknown symbol release_firmware
|
---|
452 | pcmcia: Unknown symbol request_firmware
|
---|
453 | ide_cs: Unknown symbol cs_error
|
---|
454 | ide_cs: Unknown symbol pcmcia_get_first_tuple
|
---|
455 | ide_cs: Unknown symbol pcmcia_unregister_driver
|
---|
456 | ide_cs: Unknown symbol pcmcia_get_tuple_data
|
---|
457 | ide_cs: Unknown symbol pcmcia_get_next_tuple
|
---|
458 | ide_cs: Unknown symbol pcmcia_get_configuration_info
|
---|
459 | ide_cs: Unknown symbol pcmcia_request_io
|
---|
460 | ide_cs: Unknown symbol pcmcia_request_configuration
|
---|
461 | ide_cs: Unknown symbol pcmcia_release_configuration
|
---|
462 | ide_cs: Unknown symbol pcmcia_parse_tuple
|
---|
463 | ide_cs: Unknown symbol pcmcia_release_io
|
---|
464 | ide_cs: Unknown symbol pcmcia_register_driver
|
---|
465 | ide_cs: Unknown symbol pcmcia_release_irq
|
---|
466 | ide_cs: Unknown symbol pcmcia_request_irq
|
---|
467 | Floppy drive(s): fd0 is 1.44M
|
---|
468 | floppy0: no floppy controllers found
|
---|
469 | paride: module not supported by Novell, setting U taint flag.
|
---|
470 | paride: Unknown symbol parport_register_device
|
---|
471 | paride: Unknown symbol parport_release
|
---|
472 | paride: Unknown symbol parport_claim
|
---|
473 | paride: Unknown symbol parport_unregister_device
|
---|
474 | paride: Unknown symbol parport_find_base
|
---|
475 | paride: Unknown symbol parport_put_port
|
---|
476 | ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND
|
---|
477 | ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU0._CST] (Node ffff81080b384cc0), AE_NOT_FOUND
|
---|
478 | ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND
|
---|
479 | ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff81080b384f80), AE_NOT_FOUND
|
---|
480 | ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND
|
---|
481 | ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff81080b384dc0), AE_NOT_FOUND
|
---|
482 | ACPI Error (psargs-0353): [CS03] Namespace lookup failure, AE_NOT_FOUND
|
---|
483 | ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff81080b384c80), AE_NOT_FOUND
|
---|
484 | Hotpluggable processor device is not present
|
---|
485 | Hotpluggable processor device is not present
|
---|
486 | Hotpluggable processor device is not present
|
---|
487 | Hotpluggable processor device is not present
|
---|
488 | ACPI: Thermal Zone [THM0] (8 C)
|
---|
489 | ACPI: Power Button (FF) [PWRF]
|
---|
490 | yenta_socket: Unknown symbol pccard_nonstatic_ops
|
---|
491 | pcmcia: Unknown symbol release_firmware
|
---|
492 | pcmcia: Unknown symbol request_firmware
|
---|
493 | Ethernet Channel Bonding Driver: v3.0.3 (March 23, 2006)
|
---|
494 | bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
|
---|
495 | multipath: module not supported by Novell, setting U taint flag.
|
---|
496 | md: multipath personality registered for level -4
|
---|
497 | device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
|
---|
498 | dm-netlink version 0.0.2 loaded
|
---|
499 | device-mapper: multipath: version 1.0.4 loaded
|
---|
500 | device-mapper: multipath rdac: rdac: version 0.6 loaded
|
---|
501 | device-mapper: multipath hp-sw: version 1.0.0 loaded
|
---|
502 | device-mapper: multipath emc: version 0.0.4 loaded
|
---|
503 | device-mapper: multipath round-robin: version 1.0.0 loaded
|
---|
504 | raid5: automatically using best checksumming function: generic_sse
|
---|
505 | generic_sse: 7440.000 MB/sec
|
---|
506 | raid5: using function: generic_sse (7440.000 MB/sec)
|
---|
507 | md: raid5 personality registered for level 5
|
---|
508 | md: raid4 personality registered for level 4
|
---|
509 | md: raid10 personality registered for level 10
|
---|
510 | md: raid1 personality registered for level 1
|
---|
511 | md: raid0 personality registered for level 0
|
---|
512 | md: linear personality registered for level -1
|
---|
513 | pci_hotplug: PCI Hot Plug PCI Core version: 0.5
|
---|
514 | shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
---|
515 | hw_random hardware driver 1.0.0 loaded
|
---|
516 | ipmi message handler version 38.2
|
---|
517 | ipmi device interface
|
---|
518 | IPMI System Interface driver.
|
---|
519 | ipmi_si: ACPI/SPMI specifies "kcs" I/O SI @ 0xca2
|
---|
520 | ipmi_si: Unable to find any System Interface(s)
|
---|
521 | ip_tables: (C) 2000-2006 Netfilter Core Team
|
---|
522 | fuse init (API version 7.8)
|
---|
523 | SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
|
---|
524 | JFS: nTxBlock = 8192, nTxLock = 65536
|
---|
525 | Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
|
---|
526 | 08:02 -------------
|
---|
527 | 08:02 /proc/swaps:
|
---|
528 | 08:02 -------------
|
---|
529 | 08:02 -------------
|
---|
530 | 08:02 /proc/filesystems:
|
---|
531 | 08:02 -------------
|
---|
532 | nodev sysfs
|
---|
533 | nodev rootfs
|
---|
534 | nodev bdev
|
---|
535 | nodev proc
|
---|
536 | nodev cpuset
|
---|
537 | nodev debugfs
|
---|
538 | nodev securityfs
|
---|
539 | nodev sockfs
|
---|
540 | nodev pipefs
|
---|
541 | nodev futexfs
|
---|
542 | nodev tmpfs
|
---|
543 | nodev inotifyfs
|
---|
544 | nodev eventpollfs
|
---|
545 | nodev devpts
|
---|
546 | ext2
|
---|
547 | nodev ramfs
|
---|
548 | nodev hugetlbfs
|
---|
549 | minix
|
---|
550 | iso9660
|
---|
551 | nodev mqueue
|
---|
552 | nodev usbfs
|
---|
553 | nodev rpc_pipefs
|
---|
554 | nodev nfs
|
---|
555 | nodev nfs4
|
---|
556 | nodev fuse
|
---|
557 | fuseblk
|
---|
558 | nodev fusectl
|
---|
559 | reiserfs
|
---|
560 | xfs
|
---|
561 | jfs
|
---|
562 | ext3
|
---|
563 | nodev nfsd
|
---|
564 | vfat
|
---|
565 | msdos
|
---|
566 | 08:02 -------------
|
---|
567 | 08:02 /proc/partitions:
|
---|
568 | 08:02 -------------
|
---|
569 | major minor #blocks name
|
---|
570 |
|
---|
571 | 104 0 143338560 cciss/c0d0
|
---|
572 | 104 1 8401963 cciss/c0d0p1
|
---|
573 | 104 2 31471335 cciss/c0d0p2
|
---|
574 | 104 3 103458600 cciss/c0d0p3
|
---|
575 | 104 16 143338560 cciss/c0d1
|
---|
576 | 104 17 143331898 cciss/c0d1p1
|
---|
577 | 253 0 143338560 dm-0
|
---|
578 | 253 1 143338560 dm-1
|
---|
579 | 253 2 8401963 dm-2
|
---|
580 | 253 3 31471335 dm-3
|
---|
581 | 253 4 103458600 dm-4
|
---|
582 | 253 5 143331898 dm-5
|
---|
583 | 08:02 backup-media-type is specified in config file - great.
|
---|
584 | 08:02 Calling post-init
|
---|
585 | Here is my /tmp/mountlist.txt
|
---|
586 | /dev/cciss/c0d0p3 lvm lvm 103474665
|
---|
587 | /dev/cciss/c0d0p2 / ext3 31463302
|
---|
588 | /dev/cciss/c0d1p1 /data ext3 143331898
|
---|
589 | /dev/system/home /home ext3 lvm
|
---|
590 | /dev/system/opt /opt ext3 lvm
|
---|
591 | /dev/system/tftpboot /tftpboot ext3 lvm
|
---|
592 | /dev/system/tmp /tmp ext3 lvm
|
---|
593 | /dev/system/usr /usr ext3 lvm
|
---|
594 | /dev/system/var /var ext3 lvm
|
---|
595 | /dev/cciss/c0d0p1 swap swap 8393920
|
---|
596 | 08:02 mondorestore found; cool...
|
---|
597 | 08:02 mount-me found
|
---|
598 | 08:02 unmount-me found
|
---|
599 | 08:02 mondorestore found
|
---|
600 | 08:02 -------------------NUKE MODE-------------------
|
---|
601 | [TH=6594] libmondo-tools.c->reset_bkpinfo#856: Hi
|
---|
602 | root is mounted at /dev/root
|
---|
603 |
|
---|
604 | No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
605 | [TH=6594] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1
|
---|
606 | [TH=6594] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2219: bkpinfo->tmpdir is being set to //mondo.tmp.Bi9q74
|
---|
607 | [TH=6594] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2223: bkpinfo->scratchdir is being set to //mondo.scratch.17767
|
---|
608 | running: mkdir -p /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
609 | --------------------------------start of output-----------------------------
|
---|
610 | --------------------------------end of output------------------------------
|
---|
611 | ...ran just fine. :-)
|
---|
612 | root is mounted at /dev/root
|
---|
613 |
|
---|
614 | No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
615 | [TH=6594] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1
|
---|
616 | running: mount / -o remount,rw > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
617 | --------------------------------start of output-----------------------------
|
---|
618 | --------------------------------end of output------------------------------
|
---|
619 | ...ran just fine. :-)
|
---|
620 | [Main] libmondo-tools.c->get_kernel_version#262: g_kernel_version = 2.616000
|
---|
621 | [Main] mondorestore.c->main#2895: FYI - g_mountlist_fname = /tmp/mountlist.txt
|
---|
622 | running: cp -f /tmp/mountlist.txt /tmp/mountlist.txt.orig > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
623 | --------------------------------start of output-----------------------------
|
---|
624 | --------------------------------end of output------------------------------
|
---|
625 | ...ran just fine. :-)
|
---|
626 | running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
627 | --------------------------------start of output-----------------------------
|
---|
628 | --------------------------------end of output------------------------------
|
---|
629 | ...ran just fine. :-)
|
---|
630 | running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
631 | --------------------------------start of output-----------------------------
|
---|
632 | --------------------------------end of output------------------------------
|
---|
633 | ...ran just fine. :-)
|
---|
634 | -------------- Mondo Restore v2.2.8-r2153 -------------
|
---|
635 | DON'T PANIC! Mondorestore logs almost everything, so please
|
---|
636 | don't break out in a cold sweat just because you see a few
|
---|
637 | error messages in the log. Read them; analyze them; see if
|
---|
638 | they are significant; above all, verify your backups! Please
|
---|
639 | attach a compressed copy of this log to any e-mail you send
|
---|
640 | to the Mondo mailing list when you are seeking technical
|
---|
641 | support. Without it, we can't help you. - DevTeam
|
---|
642 | ------------------------------------------------------------
|
---|
643 | BTW, despite (or perhaps because of) the wealth of messages,
|
---|
644 | some users are inclined to stop reading this log. If Mondo
|
---|
645 | stopped for some reason, chances are it's detailed here.
|
---|
646 | More than likely there's a message at the very end of this
|
---|
647 | log that will tell you what is wrong. Please read it!
|
---|
648 | ------------------------------------------------------------
|
---|
649 | [Main] mondorestore.c->main#2931: I am in disaster recovery mode
|
---|
650 | [Main] mondorestore.c->main#2936: mondorestore.c, main, 47120086207352: what time is it
|
---|
651 | [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found afio at /usr/bin/afio
|
---|
652 | running: which mkfs.vfat > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
653 | --------------------------------start of output-----------------------------
|
---|
654 | /sbin/mkfs.vfat
|
---|
655 | --------------------------------end of output------------------------------
|
---|
656 | ...ran just fine. :-)
|
---|
657 | [Main] libmondo-cli.c->handle_incoming_parameters#115: Switches:-
|
---|
658 | [Main] libmondo-cli.c->handle_incoming_parameters#119: -Z nuke
|
---|
659 | [Main] mondorestore.c->main#3117: I must be in disaster recovery mode.
|
---|
660 | [Main] mondorestore.c->main#3118: FYI, MOUNTLIST_FNAME = /tmp/mountlist.txt
|
---|
661 | [Main] mondorestore.c->main#3120: mondorestore.c, main, 47120086207536: About to call load_mountlist and load_raidtab
|
---|
662 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#885: Backup medium is CD-R[W]
|
---|
663 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#924: Internal tape block size has been custom-set to 32768
|
---|
664 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#963: differential var = '0'
|
---|
665 | [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#967: This is a regular (full) backup
|
---|
666 | [Main] libmondo-mountlist.c->load_mountlist#898: Loading mountlist...
|
---|
667 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p3 lvm lvm 103474665
|
---|
668 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p2 / ext3 31463302
|
---|
669 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d1p1 /data ext3 143331898
|
---|
670 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/home /home ext3 0
|
---|
671 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/opt /opt ext3 0
|
---|
672 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tftpboot /tftpboot ext3 0
|
---|
673 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tmp /tmp ext3 0
|
---|
674 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/usr /usr ext3 0
|
---|
675 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/var /var ext3 0
|
---|
676 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p1 swap swap 8393920
|
---|
677 | [Main] libmondo-mountlist.c->load_mountlist#977: Mountlist loaded successfully.
|
---|
678 | [Main] libmondo-mountlist.c->load_mountlist#979: 10 entries in mountlist
|
---|
679 | [Main] libmondo-files.c->length_of_file#536: filename=/etc/raidtab
|
---|
680 | Unable to openin filename (No such file or directory)
|
---|
681 | [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Raidtab is very small or non-existent. Ignoring it.
|
---|
682 | [Main] mondorestore.c->main#3126: mondorestore.c, main, 47120086207542: Returned from calling load_mountlist and load_raidtab successfully
|
---|
683 | [Main] mondorestore.c->main#3146: Send in the clowns.
|
---|
684 | [Main] mondorestore.c->main#3150: mondorestore.c, main, 47120086207566: nuking
|
---|
685 | [Main] mondorestore.c->nuke_mode#784: nuke_mode --- starting
|
---|
686 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2221: gcffa --- starting
|
---|
687 | I'm thinking...
|
---|
688 | running: mkdir -p //mondo.tmp.Bi9q74/mount.bootdisk > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
689 | --------------------------------start of output-----------------------------
|
---|
690 | --------------------------------end of output------------------------------
|
---|
691 | ...ran just fine. :-)
|
---|
692 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2237: mountpt = //mondo.tmp.Bi9q74/mount.bootdisk; cfg_file=//mondo.tmp.Bi9q74/tmp/mondo-restore.cfg
|
---|
693 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2240: gcffa --- we don't have cfg file yet.
|
---|
694 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2244: gcffa --- calling mount_media now :)
|
---|
695 | running: mount | grep -F /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
696 | --------------------------------start of output-----------------------------
|
---|
697 | --------------------------------end of output------------------------------
|
---|
698 | ...ran with res=256
|
---|
699 | [Main] mondo-rstr-tools.c->mount_media#681: (mount_media) --- command = mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom
|
---|
700 | running: mount /dev/cdrom -t iso9660 -o ro /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
701 | --------------------------------start of output-----------------------------
|
---|
702 | --------------------------------end of output------------------------------
|
---|
703 | ...ran just fine. :-)
|
---|
704 | [Main] mondo-rstr-tools.c->mount_media#696: Mounted media drive OK
|
---|
705 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2247: gcffa --- managed to mount CD; so, no need for Plan B
|
---|
706 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /mnt/cdrom mounted?
|
---|
707 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2302: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz
|
---|
708 | running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
709 | --------------------------------start of output-----------------------------
|
---|
710 | ./tmp/mondo-restore.cfg
|
---|
711 | ./tmp/mountlist.txt
|
---|
712 | ./tmp/i-want-my-lvm
|
---|
713 | ./tmp/filelist.full.gz
|
---|
714 | ./tmp/biggielist.txt
|
---|
715 | --------------------------------end of output------------------------------
|
---|
716 | ...ran just fine. :-)
|
---|
717 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2318: gcffa --- great! We've got the config file
|
---|
718 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2323: mondo-rstr-tools.c, get_cfg_file_from_archive, 2323: cp -f /mondo.tmp.Bi9q74/tmp/mondo-restore.cfg //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg
|
---|
719 | running: cp -f /mondo.tmp.Bi9q74/tmp/mondo-restore.cfg //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
720 | --------------------------------start of output-----------------------------
|
---|
721 | cp: '/mondo.tmp.Bi9q74/tmp/mondo-restore.cfg' and '//mondo.tmp.Bi9q74/tmp/mondo-restore.cfg' are the same file
|
---|
722 | --------------------------------end of output------------------------------
|
---|
723 | ...ran with res=256
|
---|
724 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2328: ... but an error occurred when I tried to move it to //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg
|
---|
725 | [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2335: mondo-rstr-tools.c, get_cfg_file_from_archive, 2335: cp -f /mondo.tmp.Bi9q74/tmp/mountlist.txt //mondo.tmp.Bi9q74/tmp/mountlist.txt
|
---|
726 | running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
727 | --------------------------------start of output-----------------------------
|
---|
728 | --------------------------------end of output------------------------------
|
---|
729 | ...ran just fine. :-)
|
---|
730 | Recovered mondo-restore.cfg
|
---|
731 | running: cp -f //mondo.tmp.Bi9q74/tmp/mondo-restore.cfg /tmp/mondo-restore.cfg > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
732 | --------------------------------start of output-----------------------------
|
---|
733 | --------------------------------end of output------------------------------
|
---|
734 | ...ran just fine. :-)
|
---|
735 | running: cp -f etc/raidtab /etc/ > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
736 | --------------------------------start of output-----------------------------
|
---|
737 | cp: cannot stat 'etc/raidtab': No such file or directory
|
---|
738 | --------------------------------end of output------------------------------
|
---|
739 | ...ran with res=256
|
---|
740 | [Main] libmondo-mountlist.c->load_mountlist#898: Loading mountlist...
|
---|
741 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p3 lvm lvm 103474665
|
---|
742 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p2 / ext3 31463302
|
---|
743 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d1p1 /data ext3 143331898
|
---|
744 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/home /home ext3 0
|
---|
745 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/opt /opt ext3 0
|
---|
746 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tftpboot /tftpboot ext3 0
|
---|
747 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/tmp /tmp ext3 0
|
---|
748 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/usr /usr ext3 0
|
---|
749 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/system/var /var ext3 0
|
---|
750 | [Main] libmondo-mountlist.c->load_mountlist#969: /dev/cciss/c0d0p1 swap swap 8393920
|
---|
751 | [Main] libmondo-mountlist.c->load_mountlist#977: Mountlist loaded successfully.
|
---|
752 | [Main] libmondo-mountlist.c->load_mountlist#979: 10 entries in mountlist
|
---|
753 | [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2585: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 47120086207001: Resizing mountlist
|
---|
754 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives
|
---|
755 | [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2587: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 47120086207003: Back from MLoDiM
|
---|
756 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979
|
---|
757 | Expanding entries to suit drive /dev/cciss/c0d0 (139979 MB)
|
---|
758 | [Main] mondo-prep.c->create_mountlist_for_drive#2617: Creating list of partitions for drive /dev/cciss/c0d0
|
---|
759 | Disk /dev/cciss/c0d0 was 139971 MB; is now 139979 MB; factor = 1.000057
|
---|
760 | Changing /dev/cciss/c0d0p3 from 103474665 KB to 103480576 KB
|
---|
761 | Changing /dev/cciss/c0d0p2 from 31463302 KB to 31465098 KB
|
---|
762 | Changing /dev/cciss/c0d0p1 from 8393920 KB to 8394399 KB
|
---|
763 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979
|
---|
764 | final_size = 139979 MB
|
---|
765 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979
|
---|
766 | Expanding entries to suit drive /dev/cciss/c0d1 (139979 MB)
|
---|
767 | [Main] mondo-prep.c->create_mountlist_for_drive#2617: Creating list of partitions for drive /dev/cciss/c0d1
|
---|
768 | Disk /dev/cciss/c0d1 was 139972 MB; is now 139979 MB; factor = 1.000050
|
---|
769 | Changing /dev/cciss/c0d1p1 from 143331898 KB to 143339088 KB
|
---|
770 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979
|
---|
771 | final_size = 139979 MB
|
---|
772 | Mountlist adjusted to suit current hard drive(s)
|
---|
773 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives
|
---|
774 | [Main] libmondo-mountlist.c->evaluate_mountlist#530: Evaluating mountlist...
|
---|
775 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d0 --> -1 or 139979 --> 139979
|
---|
776 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#383: /dev/cciss/c0d0 is 139979 MB
|
---|
777 | Looking for partition table format type
|
---|
778 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
779 | Found MBR partition table format type
|
---|
780 | Looking for partition table format type
|
---|
781 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
782 | Found MBR partition table format type
|
---|
783 | Looking for partition table format type
|
---|
784 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
785 | Found MBR partition table format type
|
---|
786 | [Main] libmondo-devices.c->get_phys_size_of_drive#1029: /dev/cciss/c0d1 --> -1 or 139979 --> 139979
|
---|
787 | [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#383: /dev/cciss/c0d1 is 139979 MB
|
---|
788 | Looking for partition table format type
|
---|
789 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
790 | Found MBR partition table format type
|
---|
791 | [Main] libmondo-mountlist.c->save_mountlist_to_disk#1003: save_mountlist_to_disk() --- saving to /tmp/mountlist.txt
|
---|
792 | Restoring Automatically
|
---|
793 | [Main] mondo-prep.c->partition_everything#1954: partition_everything() --- starting
|
---|
794 | Partitioning hard drives
|
---|
795 | Stopping all LVMs, just in case
|
---|
796 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#254: mondo-prep.c, do_my_funky_lvm_stuff, 254: STARTING
|
---|
797 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#255: OK, opened i-want-my-lvm. Shutting down LVM volumes...
|
---|
798 | [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found lvm at /sbin/lvm
|
---|
799 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#283: Closed i-want-my-lvm. Finished erasing LVMs.
|
---|
800 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#431: mondo-prep.c, do_my_funky_lvm_stuff, 431: ENDING
|
---|
801 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#436: Not many errors. Returning 0.
|
---|
802 | Stopping all software RAID devices, just in case
|
---|
803 | Done.
|
---|
804 | [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#726: Making list of drives
|
---|
805 | [Main] mondo-prep.c->partition_drive#1504: Partitioning drive /dev/cciss/c0d0
|
---|
806 | [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p1 in mountlist
|
---|
807 | [Main] mondo-prep.c->partition_drive#1592: Wiping /dev/cciss/c0d0's partition table
|
---|
808 | [Main] mondo-prep.c->partition_drive#1614: mondo-prep.c, partition_drive, 1614: New, kernel-friendly partition remover
|
---|
809 | [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 1, 0, 'swap', 8394399) --- starting
|
---|
810 | [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p1 (8197 MB)
|
---|
811 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p1 mounted?
|
---|
812 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null'
|
---|
813 | Looking for partition table format type
|
---|
814 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
815 | Found MBR partition table format type
|
---|
816 | [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing
|
---|
817 | [Main] mondo-prep.c->partition_device#1840: output = 'n
|
---|
818 | p
|
---|
819 | 1
|
---|
820 |
|
---|
821 | +8394399K
|
---|
822 | '
|
---|
823 | [Main] mondo-prep.c->partition_device#1845: Successfully created partition 1 on /dev/cciss/c0d0
|
---|
824 | [Main] mondo-prep.c->partition_device#1851: Trying to set partition 1 type now on /dev/cciss/c0d0
|
---|
825 | [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p1's type to swap (82)
|
---|
826 | [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving
|
---|
827 | [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p2 in mountlist
|
---|
828 | [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 2, 1, 'ext3', 31465098) --- starting
|
---|
829 | [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p2 (30727 MB)
|
---|
830 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p2 mounted?
|
---|
831 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null'
|
---|
832 | Looking for partition table format type
|
---|
833 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
834 | Found MBR partition table format type
|
---|
835 | [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing
|
---|
836 | [Main] mondo-prep.c->partition_device#1840: output = 'n
|
---|
837 | p
|
---|
838 | 2
|
---|
839 |
|
---|
840 | +31465098K
|
---|
841 | '
|
---|
842 | [Main] mondo-prep.c->partition_device#1845: Successfully created partition 2 on /dev/cciss/c0d0
|
---|
843 | [Main] mondo-prep.c->partition_device#1851: Trying to set partition 2 type now on /dev/cciss/c0d0
|
---|
844 | [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p2's type to ext3 (83)
|
---|
845 | [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving
|
---|
846 | [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d0p3 in mountlist
|
---|
847 | [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d0', 3, 2, 'lvm', 103480576) --- starting
|
---|
848 | [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d0p3 (101055 MB)
|
---|
849 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p3 mounted?
|
---|
850 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p3 " > /dev/null 2> /dev/null'
|
---|
851 | Looking for partition table format type
|
---|
852 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
853 | Found MBR partition table format type
|
---|
854 | [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing
|
---|
855 | [Main] mondo-prep.c->partition_device#1840: output = 'n
|
---|
856 | p
|
---|
857 | 3
|
---|
858 |
|
---|
859 | +103480576K
|
---|
860 | '
|
---|
861 | [Main] mondo-prep.c->partition_device#1845: Successfully created partition 3 on /dev/cciss/c0d0
|
---|
862 | [Main] mondo-prep.c->partition_device#1851: Trying to set partition 3 type now on /dev/cciss/c0d0
|
---|
863 | [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d0p3's type to lvm (8e)
|
---|
864 | [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving
|
---|
865 | ------------------- fdisk.log looks like this ------------------
|
---|
866 |
|
---|
867 | The number of cylinders for this disk is set to 17844.
|
---|
868 | There is nothing wrong with that, but this is larger than 1024,
|
---|
869 | and could in certain setups cause problems with:
|
---|
870 | 1) software that runs at boot time (e.g., old versions of LILO)
|
---|
871 | 2) booting and partitioning software from other OSs
|
---|
872 | (e.g., DOS FDISK, OS/2 FDISK)
|
---|
873 |
|
---|
874 | Command (m for help): Partition number (1-4): Value out of range.
|
---|
875 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
876 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
877 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
878 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
879 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
880 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
881 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
882 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
883 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
884 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
885 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
886 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
887 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
888 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
889 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
890 | Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type
|
---|
891 |
|
---|
892 | Command (m for help): Partition number (1-4):
|
---|
893 | Command (m for help): Partition number (1-4):
|
---|
894 | Command (m for help): Selected partition 1
|
---|
895 |
|
---|
896 | Command (m for help): 1: unknown command
|
---|
897 | Command action
|
---|
898 | a toggle a bootable flag
|
---|
899 | b edit bsd disklabel
|
---|
900 | c toggle the dos compatibility flag
|
---|
901 | d delete a partition
|
---|
902 | l list known partition types
|
---|
903 | m print this menu
|
---|
904 | n add a new partition
|
---|
905 | o create a new empty DOS partition table
|
---|
906 | p print the partition table
|
---|
907 | q quit without saving changes
|
---|
908 | s create a new empty Sun disklabel
|
---|
909 | t change a partition's system id
|
---|
910 | u change display/entry units
|
---|
911 | v verify the partition table
|
---|
912 | w write table to disk and exit
|
---|
913 | x extra functionality (experts only)
|
---|
914 |
|
---|
915 | Command (m for help): n
|
---|
916 | Command action
|
---|
917 | e extended
|
---|
918 | p primary partition (1-4)
|
---|
919 | p
|
---|
920 | Partition number (1-4): 1
|
---|
921 | First cylinder (1-17844, default 1):
|
---|
922 | Using default value 1
|
---|
923 | Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844): +8394399K
|
---|
924 |
|
---|
925 | Command (m for help):
|
---|
926 | Command (m for help):
|
---|
927 | Command (m for help): p
|
---|
928 |
|
---|
929 | Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
|
---|
930 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
931 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
932 |
|
---|
933 | Device Boot Start End Blocks Id System
|
---|
934 | /dev/cciss/c0d0p1 1 1046 8401963+ 83 Linux
|
---|
935 |
|
---|
936 | Command (m for help): t
|
---|
937 | Selected partition 1
|
---|
938 | Hex code (type L to list codes): 82
|
---|
939 | Changed system type of partition 1 to 82 (Linux swap / Solaris)
|
---|
940 |
|
---|
941 | Command (m for help):
|
---|
942 | Command (m for help): p
|
---|
943 |
|
---|
944 | Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
|
---|
945 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
946 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
947 |
|
---|
948 | Device Boot Start End Blocks Id System
|
---|
949 | /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris
|
---|
950 |
|
---|
951 | Command (m for help): n
|
---|
952 | Command action
|
---|
953 | e extended
|
---|
954 | p primary partition (1-4)
|
---|
955 | p
|
---|
956 | Partition number (1-4): 2
|
---|
957 | First cylinder (1047-17844, default 1047):
|
---|
958 | Using default value 1047
|
---|
959 | Last cylinder or +size or +sizeM or +sizeK (1047-17844, default 17844): +31465098K
|
---|
960 |
|
---|
961 | Command (m for help):
|
---|
962 | Command (m for help):
|
---|
963 | Command (m for help): p
|
---|
964 |
|
---|
965 | Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
|
---|
966 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
967 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
968 |
|
---|
969 | Device Boot Start End Blocks Id System
|
---|
970 | /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris
|
---|
971 | /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux
|
---|
972 |
|
---|
973 | Command (m for help): n
|
---|
974 | Command action
|
---|
975 | e extended
|
---|
976 | p primary partition (1-4)
|
---|
977 | p
|
---|
978 | Partition number (1-4): 3
|
---|
979 | First cylinder (4965-17844, default 4965):
|
---|
980 | Using default value 4965
|
---|
981 | Last cylinder or +size or +sizeM or +sizeK (4965-17844, default 17844): +103480576K
|
---|
982 | Value out of range.
|
---|
983 | Last cylinder or +size or +sizeM or +sizeK (4965-17844, default 17844):
|
---|
984 | Using default value 17844
|
---|
985 |
|
---|
986 | Command (m for help):
|
---|
987 | Command (m for help): p
|
---|
988 |
|
---|
989 | Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
|
---|
990 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
991 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
992 |
|
---|
993 | Device Boot Start End Blocks Id System
|
---|
994 | /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris
|
---|
995 | /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux
|
---|
996 | /dev/cciss/c0d0p3 4965 17844 103458600 83 Linux
|
---|
997 |
|
---|
998 | Command (m for help): t
|
---|
999 | Partition number (1-4): 3
|
---|
1000 | Hex code (type L to list codes): 8e
|
---|
1001 | Changed system type of partition 3 to 8e (Linux LVM)
|
---|
1002 |
|
---|
1003 | Command (m for help):
|
---|
1004 | Command (m for help): p
|
---|
1005 |
|
---|
1006 | Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
|
---|
1007 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
1008 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1009 |
|
---|
1010 | Device Boot Start End Blocks Id System
|
---|
1011 | /dev/cciss/c0d0p1 1 1046 8401963+ 82 Linux swap / Solaris
|
---|
1012 | /dev/cciss/c0d0p2 1047 4964 31471335 83 Linux
|
---|
1013 | /dev/cciss/c0d0p3 4965 17844 103458600 8e Linux LVM
|
---|
1014 |
|
---|
1015 | Command (m for help): a
|
---|
1016 | Partition number (1-4): 2
|
---|
1017 |
|
---|
1018 | Command (m for help): w
|
---|
1019 | The partition table has been altered!
|
---|
1020 |
|
---|
1021 | Calling ioctl() to re-read partition table.
|
---|
1022 | Syncing disks.
|
---|
1023 | ------------------- end of fdisk.log... word! ------------------
|
---|
1024 | [Main] mondo-prep.c->partition_drive#1504: Partitioning drive /dev/cciss/c0d1
|
---|
1025 | [Main] mondo-prep.c->partition_drive#1589: Found partition /dev/cciss/c0d1p1 in mountlist
|
---|
1026 | [Main] mondo-prep.c->partition_drive#1592: Wiping /dev/cciss/c0d1's partition table
|
---|
1027 | [Main] mondo-prep.c->partition_drive#1614: mondo-prep.c, partition_drive, 1614: New, kernel-friendly partition remover
|
---|
1028 | [Main] mondo-prep.c->partition_device#1738: partition_device('/dev/cciss/c0d1', 1, 0, 'ext3', 143339088) --- starting
|
---|
1029 | [Main] mondo-prep.c->partition_device#1758: Partitioning device /dev/cciss/c0d1p1 (139979 MB)
|
---|
1030 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d1p1 mounted?
|
---|
1031 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d1p1 " > /dev/null 2> /dev/null'
|
---|
1032 | Looking for partition table format type
|
---|
1033 | [Main] libmondo-devices.c->which_partition_format#2647: Using /sbin/parted2fdisk
|
---|
1034 | Found MBR partition table format type
|
---|
1035 | [Main] mondo-prep.c->partition_device#1839: Doing the new all-in-one fdisk thing
|
---|
1036 | [Main] mondo-prep.c->partition_device#1840: output = 'n
|
---|
1037 | p
|
---|
1038 | 1
|
---|
1039 |
|
---|
1040 | +143339088K
|
---|
1041 | '
|
---|
1042 | [Main] mondo-prep.c->partition_device#1845: Successfully created partition 1 on /dev/cciss/c0d1
|
---|
1043 | [Main] mondo-prep.c->partition_device#1851: Trying to set partition 1 type now on /dev/cciss/c0d1
|
---|
1044 | [Main] mondo-prep.c->set_partition_type#2109: Setting /dev/cciss/c0d1p1's type to ext3 (83)
|
---|
1045 | [Main] mondo-prep.c->partition_device#1919: partition_device() --- leaving
|
---|
1046 | ------------------- fdisk.log looks like this ------------------
|
---|
1047 |
|
---|
1048 | The number of cylinders for this disk is set to 17844.
|
---|
1049 | There is nothing wrong with that, but this is larger than 1024,
|
---|
1050 | and could in certain setups cause problems with:
|
---|
1051 | 1) software that runs at boot time (e.g., old versions of LILO)
|
---|
1052 | 2) booting and partitioning software from other OSs
|
---|
1053 | (e.g., DOS FDISK, OS/2 FDISK)
|
---|
1054 |
|
---|
1055 | Command (m for help): Partition number (1-4): Value out of range.
|
---|
1056 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1057 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1058 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1059 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1060 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1061 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1062 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1063 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1064 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1065 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1066 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1067 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1068 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1069 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1070 | Partition number (1-4): Partition number (1-4): Value out of range.
|
---|
1071 | Partition number (1-4): Partition number (1-4): Warning: partition 4 has empty type
|
---|
1072 |
|
---|
1073 | Command (m for help): Partition number (1-4): Warning: partition 3 has empty type
|
---|
1074 |
|
---|
1075 | Command (m for help): Partition number (1-4): Warning: partition 2 has empty type
|
---|
1076 |
|
---|
1077 | Command (m for help): Selected partition 1
|
---|
1078 |
|
---|
1079 | Command (m for help): 1: unknown command
|
---|
1080 | Command action
|
---|
1081 | a toggle a bootable flag
|
---|
1082 | b edit bsd disklabel
|
---|
1083 | c toggle the dos compatibility flag
|
---|
1084 | d delete a partition
|
---|
1085 | l list known partition types
|
---|
1086 | m print this menu
|
---|
1087 | n add a new partition
|
---|
1088 | o create a new empty DOS partition table
|
---|
1089 | p print the partition table
|
---|
1090 | q quit without saving changes
|
---|
1091 | s create a new empty Sun disklabel
|
---|
1092 | t change a partition's system id
|
---|
1093 | u change display/entry units
|
---|
1094 | v verify the partition table
|
---|
1095 | w write table to disk and exit
|
---|
1096 | x extra functionality (experts only)
|
---|
1097 |
|
---|
1098 | Command (m for help): n
|
---|
1099 | Command action
|
---|
1100 | e extended
|
---|
1101 | p primary partition (1-4)
|
---|
1102 | p
|
---|
1103 | Partition number (1-4): 1
|
---|
1104 | First cylinder (1-17844, default 1):
|
---|
1105 | Using default value 1
|
---|
1106 | Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844): +143339088K
|
---|
1107 | Value out of range.
|
---|
1108 | Last cylinder or +size or +sizeM or +sizeK (1-17844, default 17844):
|
---|
1109 | Using default value 17844
|
---|
1110 |
|
---|
1111 | Command (m for help):
|
---|
1112 | Command (m for help): p
|
---|
1113 |
|
---|
1114 | Disk /dev/cciss/c0d1: 146.7 GB, 146778685440 bytes
|
---|
1115 | 255 heads, 63 sectors/track, 17844 cylinders
|
---|
1116 | Units = cylinders of 16065 * 512 = 8225280 bytes
|
---|
1117 |
|
---|
1118 | Device Boot Start End Blocks Id System
|
---|
1119 | /dev/cciss/c0d1p1 1 17844 143331898+ 83 Linux
|
---|
1120 |
|
---|
1121 | Command (m for help): a
|
---|
1122 | Partition number (1-4): 2
|
---|
1123 | Warning: partition 2 has empty type
|
---|
1124 |
|
---|
1125 | Command (m for help): w
|
---|
1126 | The partition table has been altered!
|
---|
1127 |
|
---|
1128 | Calling ioctl() to re-read partition table.
|
---|
1129 | Syncing disks.
|
---|
1130 | ------------------- end of fdisk.log... word! ------------------
|
---|
1131 | Done.
|
---|
1132 | Preparing to format your disk(s)
|
---|
1133 | Please wait. This may take a few minutes.
|
---|
1134 | [Main] mondo-prep.c->format_everything#937: format_everything (mountlist, interactively = false
|
---|
1135 | Formatting partitions
|
---|
1136 | [Main] mondo-prep.c->format_everything#949: Stopping all RAID devices
|
---|
1137 | [Main] mondo-prep.c->format_everything#955: Prepare soft-RAIDs
|
---|
1138 | [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p3
|
---|
1139 | [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p2
|
---|
1140 | [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d1p1
|
---|
1141 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/home
|
---|
1142 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/opt
|
---|
1143 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/tftpboot
|
---|
1144 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/tmp
|
---|
1145 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/usr
|
---|
1146 | [Main] mondo-prep.c->format_everything#958: Examining /dev/system/var
|
---|
1147 | [Main] mondo-prep.c->format_everything#958: Examining /dev/cciss/c0d0p1
|
---|
1148 | [Main] mondo-prep.c->format_everything#985: Creating LVMs
|
---|
1149 | [Main] mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2431: mondo-rstr-tools.c, wait_until_software_raids_are_prepped, 2431: wait_until_software_raids_are_prepped
|
---|
1150 | Configuring LVM
|
---|
1151 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#254: mondo-prep.c, do_my_funky_lvm_stuff, 254: STARTING
|
---|
1152 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#255: OK, opened i-want-my-lvm. Shutting down LVM volumes...
|
---|
1153 | [Main] libmondo-files.c->find_home_of_exe#359: find_home_of_exe () --- Found lvm at /sbin/lvm
|
---|
1154 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#288: OK, rewound i-want-my-lvm. Doing funky stuff...
|
---|
1155 | lvm vgchange -an --> 0
|
---|
1156 | echo y | pvcreate -ff /dev/cciss/c0d0p3 --> 1280
|
---|
1157 | lvm vgscan --> 0
|
---|
1158 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#320: Deleting old entries at /dev/system
|
---|
1159 | running: rm -Rf /dev/system > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1160 | --------------------------------start of output-----------------------------
|
---|
1161 | --------------------------------end of output------------------------------
|
---|
1162 | ...ran just fine. :-)
|
---|
1163 | running: lvm vgscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1164 | --------------------------------start of output-----------------------------
|
---|
1165 | Reading all physical volumes. This may take a while...
|
---|
1166 | File descriptor 3 left open
|
---|
1167 | File descriptor 4 left open
|
---|
1168 | File descriptor 5 left open
|
---|
1169 | File descriptor 6 left open
|
---|
1170 | File descriptor 7 left open
|
---|
1171 | File descriptor 8 left open
|
---|
1172 | No volume groups found
|
---|
1173 | --------------------------------end of output------------------------------
|
---|
1174 | ...ran just fine. :-)
|
---|
1175 | running: lvm pvscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1176 | --------------------------------start of output-----------------------------
|
---|
1177 | No matching physical volumes found
|
---|
1178 | File descriptor 3 left open
|
---|
1179 | File descriptor 4 left open
|
---|
1180 | File descriptor 5 left open
|
---|
1181 | File descriptor 6 left open
|
---|
1182 | File descriptor 7 left open
|
---|
1183 | File descriptor 8 left open
|
---|
1184 | --------------------------------end of output------------------------------
|
---|
1185 | ...ran just fine. :-)
|
---|
1186 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#329: After working around potentially broken i-want-my-lvm, incoming[] is now '# lvm vgcreate system -l 0 -p 0 -s 4m /dev/cciss/c0d0p3 '
|
---|
1187 | vgcreate system -l 0 -p 0 -s 4m /dev/cciss/c0d0p3 --> 1280
|
---|
1188 | In case you're interested...
|
---|
1189 | running: lvm vgscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1190 | --------------------------------start of output-----------------------------
|
---|
1191 | Reading all physical volumes. This may take a while...
|
---|
1192 | File descriptor 3 left open
|
---|
1193 | File descriptor 4 left open
|
---|
1194 | File descriptor 5 left open
|
---|
1195 | File descriptor 6 left open
|
---|
1196 | File descriptor 7 left open
|
---|
1197 | File descriptor 8 left open
|
---|
1198 | No volume groups found
|
---|
1199 | --------------------------------end of output------------------------------
|
---|
1200 | ...ran just fine. :-)
|
---|
1201 | running: lvm pvscan > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1202 | --------------------------------start of output-----------------------------
|
---|
1203 | No matching physical volumes found
|
---|
1204 | File descriptor 3 left open
|
---|
1205 | File descriptor 4 left open
|
---|
1206 | File descriptor 5 left open
|
---|
1207 | File descriptor 6 left open
|
---|
1208 | File descriptor 7 left open
|
---|
1209 | File descriptor 8 left open
|
---|
1210 | --------------------------------end of output------------------------------
|
---|
1211 | ...ran just fine. :-)
|
---|
1212 | vgchange -a y system --> 1280
|
---|
1213 | lvcreate -L 30720m -r 0 -n home system --> 1280
|
---|
1214 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " vgchange -a y system" >> /tmp/out.sh... so I'll get creative.
|
---|
1215 | lvcreate -L 30720m -r 0 -n home system --> 1
|
---|
1216 | lvcreate -L 10240m -r 0 -n opt system --> 1280
|
---|
1217 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 30720m -r 0 -n home system" >> /tmp/out.sh... so I'll get creative.
|
---|
1218 | lvcreate -L 349m m -r 0 -n opt system --> 1
|
---|
1219 | lvcreate -L 15360m -r 0 -n tmp system --> 1280
|
---|
1220 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n opt system" >> /tmp/out.sh... so I'll get creative.
|
---|
1221 | lvcreate -L 349m m -r 0 -n tmp system --> 1
|
---|
1222 | lvcreate -L 8622m -r 0 -n usr system --> 1280
|
---|
1223 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n tmp system" >> /tmp/out.sh... so I'll get creative.
|
---|
1224 | lvcreate -L 349m -r 0 -n usr system --> 1
|
---|
1225 | lvcreate -L 10240m -r 0 -n var system --> 1280
|
---|
1226 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m -r 0 -n usr system" >> /tmp/out.sh... so I'll get creative.
|
---|
1227 | lvcreate -L 349m m -r 0 -n var system --> 1
|
---|
1228 | lvcreate -L 15360m -r 0 -n tftpboot system --> 1280
|
---|
1229 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#349: echo " lvcreate -L 349m m -r 0 -n var system" >> /tmp/out.sh... so I'll get creative.
|
---|
1230 | lvcreate -L 349m m -r 0 -n tftpboot system --> 1
|
---|
1231 | lvm vgscan --> 0
|
---|
1232 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#414: Closed i-want-my-lvm. Finished doing funky stuff.
|
---|
1233 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#431: mondo-prep.c, do_my_funky_lvm_stuff, 431: ENDING
|
---|
1234 | [Main] mondo-prep.c->do_my_funky_lvm_stuff#433: 9 errors. I'm reporting this.
|
---|
1235 | Failed to initialize LVM
|
---|
1236 | [Main] mondo-prep.c->format_everything#1024: Formatting regulars
|
---|
1237 | [Main] mondo-prep.c->format_everything#1037: Not formatting /dev/cciss/c0d0p3 - it's an LVM
|
---|
1238 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p2 mounted?
|
---|
1239 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p2 " > /dev/null 2> /dev/null'
|
---|
1240 | running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d0p2' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1241 | --------------------------------start of output-----------------------------
|
---|
1242 | /dev/cciss/c0d0p2 is apparently in use by the system; mke2fs forced anyway.
|
---|
1243 | --------------------------------end of output------------------------------
|
---|
1244 | ...ran just fine. :-)
|
---|
1245 | Formatting /dev/cciss/c0d0p2 as ext3...OK
|
---|
1246 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d1p1 mounted?
|
---|
1247 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d1p1 " > /dev/null 2> /dev/null'
|
---|
1248 | running: sh -c 'echo -en "y\ny\ny\n" | mkfs -t ext3 -F -q /dev/cciss/c0d1p1' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1249 | --------------------------------start of output-----------------------------
|
---|
1250 | /dev/cciss/c0d1p1 is apparently in use by the system; mke2fs forced anyway.
|
---|
1251 | --------------------------------end of output------------------------------
|
---|
1252 | ...ran just fine. :-)
|
---|
1253 | Formatting /dev/cciss/c0d1p1 as ext3...OK
|
---|
1254 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/home yet - doesn't exist - probably an LVM
|
---|
1255 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/opt yet - doesn't exist - probably an LVM
|
---|
1256 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/tftpboot yet - doesn't exist - probably an LVM
|
---|
1257 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/tmp yet - doesn't exist - probably an LVM
|
---|
1258 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/usr yet - doesn't exist - probably an LVM
|
---|
1259 | [Main] mondo-prep.c->format_everything#1050: Not formatting /dev/system/var yet - doesn't exist - probably an LVM
|
---|
1260 | [Main] libmondo-devices.c->is_this_device_mounted#1130: Is /dev/cciss/c0d0p1 mounted?
|
---|
1261 | [Main] libmondo-devices.c->is_this_device_mounted#1156: tmp (command) = 'cat /proc/swaps | grep -E "^/dev/cciss/c0d0p1 " > /dev/null 2> /dev/null'
|
---|
1262 | running: sh -c 'echo -en "y\ny\ny\n" | mkswap /dev/cciss/c0d0p1' > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1263 | --------------------------------start of output-----------------------------
|
---|
1264 | /dev/cciss/c0d0p1: Device or resource busy
|
---|
1265 | --------------------------------end of output------------------------------
|
---|
1266 | ...ran with res=256
|
---|
1267 | Formatting /dev/cciss/c0d0p1 as swap...failed
|
---|
1268 | Failed.
|
---|
1269 | Errors occurred during the formatting of your hard drives.
|
---|
1270 | [Main] mondo-prep.c->format_everything#1088: format_everything () - failed!
|
---|
1271 | Failed to partition and/or format your hard drives.
|
---|
1272 | Run complete. Errors were reported. Please review the logfile.
|
---|
1273 | [Main] mondorestore.c->main#3223: No post-nuke found.
|
---|
1274 | Restore log (/var/log/mondorestore.log) copied to /var/log on your hard disk
|
---|
1275 | Mondo-restore is exiting (retval=257)
|
---|
1276 | root is mounted at /dev/root
|
---|
1277 |
|
---|
1278 | No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
|
---|
1279 | [Main] libmondo-devices.c->am_I_in_disaster_recovery_mode#147: Is this a ramdisk? result = 1
|
---|
1280 | running: mount / -o remount,rw > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1281 | --------------------------------start of output-----------------------------
|
---|
1282 | --------------------------------end of output------------------------------
|
---|
1283 | ...ran just fine. :-)
|
---|
1284 | running: umount /mnt/cdrom > //mondo.tmp.Bi9q74/mondo-run-prog-thing.tmp 2> //mondo.tmp.Bi9q74/mondo-run-prog-thing.err
|
---|
1285 | --------------------------------start of output-----------------------------
|
---|
1286 | Command failed (Invalid argument)
|
---|
1287 | --------------------------------end of output------------------------------
|
---|
1288 | ...ran with res=512
|
---|
1289 | [Main] newt-specific.c->finish#397: Calling newtFinished()
|
---|
1290 | 08:10 Launching Shell
|
---|