Ticket #273: mondorestore.nomod.log

File mondorestore.nomod.log, 44.2 KB (added by Michael Shapiro, 13 years ago)

mondorestore log

Line 
108:09 Extracted additional /dev entries OK.     
208:09 Engaging /proc/driver/cciss/cciss0
308:09 ...result=0
408:09 Trying 'mount /dev/shm -t tmpfs -o size=64m'
508:09 Great. Pivot succeeded w/ size=64m
608:09 Successfully mounted dynamic /tmp ramdisk
708:09 find-and-mount-cdrom --- starting
808:09 Trying /dev/hda
908:09 There is a CD-ROM drive at /dev/hda but no CD in it.
1008:09 Trying /dev/hdb
1108:09 It's not in /dev/hdb; I'll keep looking
1208:09 Trying /dev/hdc
1308:09 It's not in /dev/hdc; I'll keep looking
1408:09 Trying /dev/hdd
1508:09 It's not in /dev/hdd; I'll keep looking
1608:09 Trying /dev/hde
1708:09 It's not in /dev/hde; I'll keep looking
1808:09 Trying /dev/hdf
1908:09 It's not in /dev/hdf; I'll keep looking
2008:09 Trying /dev/hdg
2108:09 It's not in /dev/hdg; I'll keep looking
2208:09 Trying /dev/hdh
2308:09 It's not in /dev/hdh; I'll keep looking
2408:09 Trying /dev/scd0
2508:09 /dev/scd0 has a CD-ROM in it
2608:09 CD-ROM found at /dev/scd0
2708:09 /dev/scd0 is where the Mondo CD lives.
2808:09 CD-ROM found and mounted at /dev/scd0
2908:09 find-and-mount-cdrom --- leaving (0)
3008:09 OK, I am running on a CD-ROM. Good.
3108:09 Starting install-additional-tools
3208:09 PLEASE WAIT. Untarring data content
3308:13 Recombining large files...
3408:13 /lib/libcrypto.so.0.9.7a (924 KB) restored. 4 slices.
3508:13 /lib/tls/libc-2.3.4.so already exists - skipped
3608:13 /sbin/fsck.ext2 (592 KB) restored. 3 slices.
3708:13 /sbin/fsck.ext3 (592 KB) restored. 3 slices.
3808:13 /sbin/ldconfig (568 KB) restored. 3 slices.
3908:13 /sbin/lvm.static (1204 KB) restored. 6 slices.
4008:13 /sbin/../usr/bin/smbmount (716 KB) restored. 3 slices.
4108:13 /usr/lib/libncurses.so.5.4 (864 KB) restored. 4 slices.
4208:13 /usr/lib/libslang-utf8.so.1.4.9 (892 KB) restored. 4 slices.
4308:13 /usr/lib/libstdc++.so.5.0.7 (732 KB) restored. 4 slices.
4408:13 /usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE/libperl.so (1240 KB) restored. 6 slices.
4508:13 /usr/sbin/lvm (508 KB) restored. 3 slices.
4608:13 /usr/sbin/mondorestore (524 KB) restored. 3 slices.
4708:13 /lib/modules/2.6.9-42.ELsmp/extra/emcp.ko (488 KB) restored. 3 slices.
4808:13 Populating / with tar file content...
4908:13 Done.
5008:13 Exiting install-additional-tools
5108:13 Starting Network...
5208:13 Configuring eth0 statically (155.49.9.220/255.255.255.0)
5308:13 Pinging NFS server...
5408:13 Mounting NFS share (155.49.10.29:/rhn/drimages) on /tmp/isodir...
5508:13 Mounting NFS image lncnb002_cd_nomod_080808_000952-1.iso in lncnb002.d on /mnt/cdrom in loopback
5608:13 klogd and syslogd have been started.
5708:13 Running 'mdadm'
5808:13 Scanning LVM's...
5908:13 LVM's have been started.
6008:13 OK, we've found /mnt/cdrom/archives/*; great.
6108:13 Config file is fine, BTW.
6208:13 init (from mindi v2.0.2-r1976)
6308:13 /proc/cmdline is:
64initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=69632 rw root=/dev/ram nuke RESTORE devfs=nomount noresume selinux=0 barrier=off ramdisk_blocksize=1024 BOOT_IMAGE=vmlinuz
6508:13 df result:
6608:13 ----------
67Filesystem           1k-blocks      Used Available Use% Mounted on
68/dev/ram0                65247     26819     37732  42% /
69none                      5120         0      5120   0% /dev
70none                   2987096         0   2987096   0% /dev/shm
71/dev/shm                 65536       784     64752   1% /tmp
72/dev/scd0               664134    664134         0 100% /mnt/cdrom
73155.49.10.29:/rhn/drimages
74                      92891136  10194752  77977792  12% /tmp/isodir
75/dev/loop0              664134    664134         0 100% /mnt/cdrom
7608:13 -------------
7708:13 mount result:
7808:13 -------------
79rootfs on / type rootfs (rw)
80/dev/root on / type ext2 (rw)
81/proc/ on /proc type proc (rw,nodiratime)
82/sys/ on /sys type sysfs (rw)
83none on /proc/bus/usb type usbfs (rw)
84none on /dev type tmpfs (rw)
85none on /dev/pts type devpts (rw)
86none on /dev/shm type tmpfs (rw)
87/dev/shm on /tmp type tmpfs (rw)
88/dev/scd0 on /mnt/cdrom type iso9660 (ro)
89155.49.10.29:/rhn/drimages on /tmp/isodir type nfs (rw,v3,rsize=32768,wsize=32768,hard,tcp,nolock,addr=155.49.10.29)
90/dev/loop0 on /mnt/cdrom type iso9660 (ro)
9108:13 -------------
9208:13 lsmod result:
9308:13 -------------
94Module                  Size  Used by
95nfs                   211113  1
96lockd                  65257  1 nfs
97nfs_acl                 7745  1 nfs
98sunrpc                143397  5 nfs,lockd,nfs_acl
99nls_utf8                6081  2
100nls_iso8859_1           8001  0
101forcedeth              24513  0
1028139too                27457  0
1038139cp                 23489  0
104pcnet32                30920  0
105tg3                   100933  0
106ne2k_pci               12705  0
1078390                   13633  1 ne2k_pci
108eepro100               32461  0
109e1000                 109113  0
110bnx2                  141605  0
111e100                   36549  0
1123c59x                  41341  0
113mii                     9153  6 8139too,8139cp,pcnet32,eepro100,e100,3c59x
114yenta_socket           22721  0
115ohci_hcd               23889  0
116ehci_hcd               32069  0
117uhci_hcd               32729  0
118usb_storage            62217  1
119edd                    13473  0
120ide_cs                 10949  0
121ds                     21189  1 ide_cs
122pcmcia_core            66681  3 yenta_socket,ide_cs,ds
123loop                   19145  2
124cciss                  63913  0
125floppy                 58065  0
126sd_mod                 20545  0
127sr_mod                 20709  1
128sg                     38113  0
129sata_nv                13381  0
130ahci                   18885  0
131ata_piix               15557  0
132libata                 67613  3 sata_nv,ahci,ata_piix
133osst                   51929  0
134st                     40157  0
135scsi_mod              117709  9 usb_storage,cciss,sd_mod,sr_mod,sg,ahci,libata,osst,st
13608:13 -------------
13708:13 dmesg result:
13808:13 -------------
139id[0x07] lapic_id[0x07] enabled)
140Processor #7 15:2 APIC version 20
141ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
142Enabling APIC mode:  Flat.  Using 0 I/O APICs
143ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
144IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
145ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
146IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
147ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
148IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
149ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
150IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI 48-63
151ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
152ACPI: IRQ0 used by override.
153ACPI: IRQ2 used by override.
154ACPI: IRQ9 used by override.
155Using ACPI (MADT) for SMP configuration information
156Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
157Built 1 zonelists
158Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=69632 rw root=/dev/ram nuke RESTORE devfs=nomount noresume selinux=0 barrier=off ramdisk_blocksize=1024 BOOT_IMAGE=vmlinuz
159mapped APIC to ffffd000 (fee00000)
160Initializing CPU#0
161CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
162PID hash table entries: 4096 (order: 12, 65536 bytes)
163Detected 2783.261 MHz processor.
164Using pmtmr for high-res timesource
165Console: colour VGA+ 80x25
166Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
167Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
168Memory: 5971036k/6291452k available (1876k kernel code, 57396k reserved, 759k data, 184k init, 5111780k highmem)
169Calibrating delay using timer specific routine.. 5567.64 BogoMIPS (lpj=2783822)
170Security Scaffold v1.0.0 initialized
171SELinux:  Disabled at boot.
172Capability LSM initialized
173Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
174CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
175CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
176CPU: Trace cache: 12K uops, L1 D cache: 8K
177CPU: L2 cache: 512K
178CPU0: Initial APIC ID: 0, Physical Processor ID: 0
179CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
180Intel machine check architecture supported.
181Intel machine check reporting enabled on CPU#0.
182CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
183CPU0: Thermal monitoring enabled
184Enabling fast FPU save and restore... done.
185Enabling unmasked SIMD FPU exception support... done.
186Checking 'hlt' instruction... OK.
187CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
188per-CPU timeslice cutoff: 1462.97 usecs.
189task migration cache decay timeout: 2 msecs.
190Booting processor 1/1 eip 3000
191CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
192Initializing CPU#1
193Calibrating delay using timer specific routine.. 5562.20 BogoMIPS (lpj=2781104)
194CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
195CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
196CPU: Trace cache: 12K uops, L1 D cache: 8K
197CPU: L2 cache: 512K
198CPU1: Initial APIC ID: 1, Physical Processor ID: 0
199CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
200Intel machine check architecture supported.
201Intel machine check reporting enabled on CPU#1.
202CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
203CPU1: Thermal monitoring enabled
204CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
205Booting processor 2/6 eip 3000
206CPU 2 irqstacks, hard=c03f0000 soft=c03d0000
207Initializing CPU#2
208Calibrating delay using timer specific routine.. 5562.14 BogoMIPS (lpj=2781071)
209CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
210CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
211CPU: Trace cache: 12K uops, L1 D cache: 8K
212CPU: L2 cache: 512K
213CPU2: Initial APIC ID: 6, Physical Processor ID: 3
214CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
215Intel machine check architecture supported.
216Intel machine check reporting enabled on CPU#2.
217CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
218CPU2: Thermal monitoring enabled
219CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
220Booting processor 3/7 eip 3000
221CPU 3 irqstacks, hard=c03f1000 soft=c03d1000
222Initializing CPU#3
223Calibrating delay using timer specific routine.. 5562.33 BogoMIPS (lpj=2781167)
224CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
225CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
226CPU: Trace cache: 12K uops, L1 D cache: 8K
227CPU: L2 cache: 512K
228CPU3: Initial APIC ID: 7, Physical Processor ID: 3
229CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
230Intel machine check architecture supported.
231Intel machine check reporting enabled on CPU#3.
232CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
233CPU3: Thermal monitoring enabled
234CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
235Total of 4 processors activated (22254.32 BogoMIPS).
236ENABLING IO-APIC IRQs
237..TIMER: vector=0x31 pin1=2 pin2=-1
238checking TSC synchronization across 4 CPUs: passed.
239Brought up 4 CPUs
240zapping low mappings.
241checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
242Freeing initrd memory: 2510k freed
243NET: Registered protocol family 16
244PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
245PCI: Using configuration type 1
246mtrr: v2.0 (20020519)
247mtrr: your CPUs had inconsistent fixed MTRR settings
248mtrr: probably your BIOS does not setup all CPUs.
249mtrr: corrected configuration.
250ACPI: Subsystem revision 20040816
251ACPI: Interpreter enabled
252ACPI: Using IOAPIC for interrupt routing
253ACPI: PCI Root Bridge [PCI0] (00:00)
254PCI: Probing PCI hardware (bus 00)
255PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
256ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
257ACPI: PCI Root Bridge [PCI1] (00:01)
258PCI: Probing PCI hardware (bus 01)
259ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
260ACPI: PCI Root Bridge [PCI2] (00:02)
261PCI: Probing PCI hardware (bus 02)
262ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
263ACPI: PCI Root Bridge [PCI3] (00:03)
264PCI: Probing PCI hardware (bus 03)
265ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
266ACPI: PCI Root Bridge [PCI4] (00:06)
267PCI: Probing PCI hardware (bus 06)
268ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
269ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 10 11 *15)
270ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3
271ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15)
272ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 *10 11 15)
273ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.
274ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.
275ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.
276ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.
277ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled.
278ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 *15)
279ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
280ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 *11 15)
281ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
282ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
283ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 *10 11 15)
284ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 *7 10 11 15)
285ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 *11 15)
286ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.
287ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.
288ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.
289Linux Plug and Play Support v0.97 (c) Adam Belay
290usbcore: registered new driver usbfs
291usbcore: registered new driver hub
292PCI: Using ACPI for IRQ routing
293ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
294ACPI: PCI interrupt 0000:00:04.2[B] -> GSI 17 (level, low) -> IRQ 177
295ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 11
296ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11
297ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 30 (level, low) -> IRQ 185
298ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 29 (level, low) -> IRQ 193
299ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 31 (level, low) -> IRQ 201
300ACPI: PCI interrupt 0000:06:01.0[A] -> GSI 24 (level, low) -> IRQ 209
301ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 26 (level, low) -> IRQ 217
302ACPI: PCI interrupt 0000:06:1e.0[A] -> GSI 18 (level, low) -> IRQ 225
303PCI: Device 00:00 not found by BIOS
304PCI: Device 00:01 not found by BIOS
305PCI: Device 00:02 not found by BIOS
306PCI: Device 00:78 not found by BIOS
307PCI: Device 00:7b not found by BIOS
308PCI: Device 00:80 not found by BIOS
309PCI: Device 00:82 not found by BIOS
310PCI: Device 00:88 not found by BIOS
311PCI: Device 00:8a not found by BIOS
312apm: BIOS not found.
313audit: initializing netlink socket (disabled)
314audit(1218182964.695:1): initialized
315highmem bounce pool size: 64 pages
316Total HugeTLB memory allocated, 0
317VFS: Disk quotas dquot_6.5.1
318Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
319Initializing Cryptographic API
320ksign: Installing public key data
321Loading keyring
322- Added public key 8301CD821788A86B
323- User ID: Red Hat, Inc. (Kernel Module GPG key)
324pci_hotplug: PCI Hot Plug PCI Core version: 0.5
325ACPI: Processor [CPU0] (supports C1)
326ACPI: Processor [CPU1] (supports C1)
327ACPI: Processor [CPU6] (supports C1)
328ACPI: Processor [CPU7] (supports C1)
329ACPI: Thermal Zone [THM0] (8 C)
330Real Time Clock Driver v1.12
331Linux agpgart interface v0.100 (c) Dave Jones
332serio: i8042 AUX port at 0x60,0x64 irq 12
333serio: i8042 KBD port at 0x60,0x64 irq 1
334Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
335ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
336RAMDISK driver initialized: 16 RAM disks of 69632K size 1024 blocksize
337divert: not allocating divert_blk for non-ethernet device lo
338Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
339ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
340SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
341SvrWks CSB5: chipset revision 147
342SvrWks CSB5: not 100% native mode: will probe irqs later
343SvrWks CSB5: simplex device: DMA forced
344    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
345SvrWks CSB5: simplex device: DMA forced
346    ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
347Probing IDE interface ide0...
348hda: CD-224E, ATAPI CD/DVD-ROM drive
349Using cfq io scheduler
350ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
351Probing IDE interface ide1...
352Probing IDE interface ide1...
353Probing IDE interface ide2...
354Probing IDE interface ide3...
355Probing IDE interface ide4...
356Probing IDE interface ide5...
357hda: ATAPI 24X CD-ROM drive, 128kB Cache
358Uniform CD-ROM driver Revision: 3.20
359ide-floppy driver 0.99.newide
360usbcore: registered new driver hiddev
361usbcore: registered new driver usbhid
362drivers/usb/input/hid-core.c: v2.0:USB HID core driver
363mice: PS/2 mouse device common for all mice
364input: AT Translated Set 2 keyboard on isa0060/serio0
365input: PS/2 Generic Mouse on isa0060/serio1
366md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
367NET: Registered protocol family 2
368IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
369TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
370TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
371TCP: Hash tables configured (established 262144 bind 262144)
372Initializing IPsec netlink socket
373NET: Registered protocol family 1
374NET: Registered protocol family 17
375ACPI: (supports S0 S4 S5)
376ACPI wakeup devices:
377
378md: Autodetecting RAID arrays.
379md: autorun ...
380md: ... autorun DONE.
381RAMDISK: Compressed image found at block 0
382VFS: Mounted root (ext2 filesystem).
383Freeing unused kernel memory: 184k freed
384SCSI subsystem initialized
385st: Version 20040403, fixed bufsize 32768, s/g segs 256
386osst :I: Tape driver with OnStream support version 0.99.1
387osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $
388libata version 1.20 loaded.
389qla2300: Unknown symbol qla2x00_remove_one
390qla2300: Unknown symbol qla2x00_probe_one
391inserting floppy driver for 2.6.9-42.ELsmp
392Floppy drive(s): fd0 is 1.44M
393FDC 0 is a National Semiconductor PC87306
394HP CISS Driver (v 2.6.10.RH1)
395cciss: Device 0xb178 has been found at bus 1 dev 3 func 0
396ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 30 (level, low) -> IRQ 185
397cciss: using DAC cycles
398      blocks= 286734240 block_size= 512
399      heads= 255, sectors= 32, cylinders= 35139
400
401      blocks= 286734240 block_size= 512
402      heads= 255, sectors= 32, cylinders= 35139
403
404 cciss/c0d0: p1 p2 p3
405loop: loaded (max 8 devices)
406Linux Kernel Card Services
407  options:  [pci] [cardbus] [pm]
408BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
409Initializing USB Mass Storage driver...
410usbcore: registered new driver usb-storage
411USB Mass Storage support registered.
412USB Universal Host Controller Interface driver v2.2
413ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
414ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11
415ohci_hcd 0000:00:0f.2: OHCI Host Controller
416ohci_hcd 0000:00:0f.2: irq 11, pci mem f88b0000
417ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
418hub 1-0:1.0: USB hub found
419hub 1-0:1.0: 4 ports detected
420e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
421e100: Copyright(c) 1999-2005 Intel Corporation
422Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
423Copyright (c) 1999-2005 Intel Corporation.
424eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
425eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
426ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
427  http://www.scyld.com/network/ne2k-pci.html
428tg3.c:v3.52-rh (Mar 06, 2006)
429ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 29 (level, low) -> IRQ 193
430divert: allocating divert_blk for eth0
431eth0: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:ee:34:69
432eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
433eth0: dma_rwctrl[769f4000]
434ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 31 (level, low) -> IRQ 201
435divert: allocating divert_blk for eth1
436eth1: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:ee:34:68
437eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
438eth1: dma_rwctrl[769f4000]
439pcnet32.c:v1.31 29.04.2005 tsbogend@alpha.franken.de
4408139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
4418139too Fast Ethernet driver 0.9.27
442forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41.
443cciss0: No device changes detected.
444cciss0: No appropriate SCSI device detected, SCSI subsystem not engaged.
445usb 1-1: new full speed USB device using address 2
446scsi0 : SCSI emulation for USB Mass Storage devices
447  Vendor: HP        Model: Virtual DVD-ROM   Rev:  0.0
448  Type:   CD-ROM                             ANSI SCSI revision: 02
449sr0: scsi3-mmc drive: 104x/99x writer caddy
450Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
451Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
452USB Mass Storage device found at 2
453cdrom: open failed.
454ISO 9660 Extensions: Microsoft Joliet Level 3
455ISO 9660 Extensions: RRIP_1991A
456ISO 9660 Extensions: Microsoft Joliet Level 3
457ISO 9660 Extensions: RRIP_1991A
458tg3: eth0: Link is up at 1000 Mbps, full duplex.
459tg3: eth0: Flow control is off for TX and off for RX.
460ISO 9660 Extensions: Microsoft Joliet Level 3
461ISO 9660 Extensions: RRIP_1991A
462cdrom: open failed.
463cdrom: open failed.
464cdrom: open failed.
465cdrom: open failed.
466cdrom: open failed.
467cdrom: open failed.
46808:13 backup-media-type is specified in config file - great.
46908:13 Calling post-init
470/dev/emcpowere1 lvm lvm 8838128
471/dev/emcpowerd1 lvm lvm 8838128
472/dev/emcpowerc1 lvm lvm 8838128
473/dev/emcpowerb1 lvm lvm 8838128
474/dev/cciss/c0d0p3 lvm lvm 138753405
475/dev/emcpowera1 lvm lvm 8838128
476/dev/vgroot/lvroot / ext3 lvm
477/dev/cciss/c0d0p1 /boot ext3 514048 /boot
478/dev/vgroot/lvhome /home ext3 lvm
479/dev/vgroot/lvlhome /lhome ext3 lvm
480/dev/vgroot/lvopt /opt ext3 lvm
481/dev/vgroot/lvtmp /tmp ext3 lvm
482/dev/vgroot/lvusr /usr ext3 lvm
483/dev/vgroot/lvvar /var ext3 lvm
484/dev/vgtest1/lvtest1 /test1 ext3 lvm
485/dev/vgtest2/lvtest2 /test2 ext3 lvm
486/dev/vgtest3/lvtest3 /test3 ext3 lvm
487/dev/vgtest4/lvtest4 /test4 ext3 lvm
488/dev/vgtest5/lvtest5 /test5 ext3 lvm
489/dev/cciss/c0d0p2 swap swap 4096564 SW-cciss/c0d0p2
49008:13 mondorestore found; cool...
49108:13 mount-me found
49208:13 unmount-me found
49308:13 mondorestore found
49408:13 -------------------NUKE MODE-------------------
495[TH=3986] libmondo-tools.c->reset_bkpinfo#846: Hi
496root is mounted at /dev/root
497
498No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
499[TH=3986] libmondo-devices.c->am_I_in_disaster_recovery_mode#148: Is this a ramdisk? result = 1
500    [TH=3986] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2400: bkpinfo->tmpdir is being set to //mondo.tmp.9kbM7t
501    [TH=3986] libmondo-devices.c->sensibly_set_tmpdir_and_scratchdir#2404: bkpinfo->scratchdir is being set to //mondo.scratch.17767
502running: mkdir -p /mnt/cdrom > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
503--------------------------------start of output-----------------------------
504--------------------------------end of output------------------------------
505...ran just fine. :-)
506root is mounted at /dev/root
507
508No, Schlomo, that doesn't mean /dev/root is the root partition. It's just a debugging message. Relax. It's part of am_I_in_disaster_recovery_mode().
509[TH=3986] libmondo-devices.c->am_I_in_disaster_recovery_mode#148: Is this a ramdisk? result = 1
510running: mount / -o remount,rw > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
511--------------------------------start of output-----------------------------
512--------------------------------end of output------------------------------
513...ran just fine. :-)
514[Main] libmondo-tools.c->get_kernel_version#262: g_kernel_version = 2.690000
515[Main] mondorestore.c->main#2970: FYI - g_mountlist_fname = /./tmp/mountlist.txt
516running: cp -f /./tmp/mountlist.txt /./tmp/mountlist.txt.orig > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
517--------------------------------start of output-----------------------------
518--------------------------------end of output------------------------------
519...ran just fine. :-)
520running: umount /mnt/cdrom > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
521--------------------------------start of output-----------------------------
522--------------------------------end of output------------------------------
523...ran just fine. :-)
524running: rm -Rf /tmp/tmpfs/mondo.tmp.* > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
525--------------------------------start of output-----------------------------
526--------------------------------end of output------------------------------
527...ran just fine. :-)
528-------------- Mondo Restore v2.2.6-r1976 -------------
529DON'T PANIC! Mondorestore logs almost everything, so please
530don't break out in a cold sweat just because you see a few 
531error messages in the log. Read them; analyze them; see if 
532they are significant; above all, verify your backups! Please
533attach a compressed copy of this log to any e-mail you send
534to the Mondo mailing list when you are seeking technical   
535support. Without it, we can't help you.            - DevTeam
536------------------------------------------------------------
537BTW, despite (or perhaps because of) the wealth of messages,
538some users are inclined to stop reading this log.  If Mondo
539stopped for some reason, chances are it's detailed here.   
540More than likely there's a message at the very end of this 
541log that will tell you what is wrong.  Please read it!     
542------------------------------------------------------------
543[Main] mondorestore.c->main#3006: I am in disaster recovery mode
544    [Main] mondorestore.c->main#3011: mondorestore.c, main, 3011: what time is it
545            [Main] libmondo-files.c->find_home_of_exe#434: find_home_of_exe () --- Found afio at /usr/bin/afio
546running: which mkfs.vfat > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
547--------------------------------start of output-----------------------------
548/sbin/mkfs.vfat
549--------------------------------end of output------------------------------
550...ran just fine. :-)
551        [Main] libmondo-cli.c->handle_incoming_parameters#249: Switches:-
552        [Main] libmondo-cli.c->handle_incoming_parameters#253: -Z nuke
553[Main] mondorestore.c->main#3197: I must be in disaster recovery mode.
554    [Main] mondorestore.c->main#3198: FYI, MOUNTLIST_FNAME = /./tmp/mountlist.txt
555    [Main] mondorestore.c->main#3200: mondorestore.c, main, 3200: About to call load_mountlist and load_raidtab
556    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1034: Backup medium is CD-R[W]
557[Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1073: Internal tape block size has been custom-set to 32768
558    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1112: differential var = '0'
559    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1116: This is a regular (full) backup
560    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1140: nfs_mount is 155.49.10.29:/rhn/drimages
561    [Main] mondo-rstr-tools.c->read_cfg_file_into_bkpinfo#1141: nfs_remote_dir is lncnb002.d
562    [Main] libmondo-mountlist.c->load_mountlist#950: Loading mountlist...
563    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowere1 lvm lvm 8838128
564    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerd1 lvm lvm 8838128
565    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerc1 lvm lvm 8838128
566    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerb1 lvm lvm 8838128
567    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p3 lvm lvm 138753405
568    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowera1 lvm lvm 8838128
569    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvroot / ext3 0
570    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p1 /boot ext3 514048 /boot
571    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvhome /home ext3 0
572    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvlhome /lhome ext3 0
573    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvopt /opt ext3 0
574    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvtmp /tmp ext3 0
575    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvusr /usr ext3 0
576    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvvar /var ext3 0
577    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest1/lvtest1 /test1 ext3 0
578    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest2/lvtest2 /test2 ext3 0
579    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest3/lvtest3 /test3 ext3 0
580    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest4/lvtest4 /test4 ext3 0
581    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest5/lvtest5 /test5 ext3 0
582    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p2 swap swap 4096564 SW-cciss/c0d0p2
583    [Main] libmondo-mountlist.c->load_mountlist#1029: Mountlist loaded successfully.
584    [Main] libmondo-mountlist.c->load_mountlist#1031: 20 entries in mountlist
585    [Main] libmondo-files.c->length_of_file#611: filename=/etc/raidtab
586Unable to openin filename (No such file or directory)
587    [Main] libmondo-raid.c->load_raidtab_into_raidlist#647: Raidtab is very small or non-existent. Ignoring it.
588    [Main] mondorestore.c->main#3206: mondorestore.c, main, 3206: Returned from calling load_mountlist and load_raidtab successfully
589[Main] libmondo-devices.c->is_this_device_mounted#1290: Is 155.49.10.29:/rhn/drimages mounted?
590[Main] mondorestore.c->main#3226: Send in the clowns.
591    [Main] mondorestore.c->main#3230: mondorestore.c, main, 3230: nuking
592    [Main] mondorestore.c->nuke_mode#741: nuke_mode --- starting
593    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2281: gcffa --- starting
594I'm thinking...
595running: mkdir -p //mondo.tmp.9kbM7t/mount.bootdisk > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
596--------------------------------start of output-----------------------------
597--------------------------------end of output------------------------------
598...ran just fine. :-)
599    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2301: mountpt = //mondo.tmp.9kbM7t/mount.bootdisk; cfg_file=//mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg
600    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2304: gcffa --- we don't have cfg file yet.
601    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2308: gcffa --- calling mount_media now :)
602running: mount | grep -F /mnt/cdrom > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
603--------------------------------start of output-----------------------------
604/dev/scd0 on /mnt/cdrom type iso9660 (ro)
605--------------------------------end of output------------------------------
606...ran just fine. :-)
607    [Main] mondo-rstr-tools.c->mount_media#776: mount_media() - media already mounted. Fair enough.
608    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2311: gcffa --- managed to mount CD; so, no need for Plan B
609[Main] libmondo-devices.c->is_this_device_mounted#1290: Is /mnt/cdrom mounted?
610    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2355: gcffa --- Plan B, a.k.a. untarring some file from all.tar.gz
611running: tar -zxvf /mnt/cdrom/images/all.tar.gz ./tmp/mountlist.txt ./tmp/mondo-restore.cfg ./tmp/biggielist.txt ./tmp/filelist.full.gz ./tmp/i-want-my-lvm > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
612--------------------------------start of output-----------------------------
613./tmp/mondo-restore.cfg
614./tmp/mountlist.txt
615./tmp/i-want-my-lvm
616./tmp/filelist.full.gz
617./tmp/biggielist.txt
618--------------------------------end of output------------------------------
619...ran just fine. :-)
620[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2365: gcffa --- great! We've got the config file
621    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2370: mondo-rstr-tools.c, get_cfg_file_from_archive, 2370: cp -f /mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg //mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg
622running: cp -f /mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg //mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
623--------------------------------start of output-----------------------------
624cp: '/mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg' and '//mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg' are the same file
625--------------------------------end of output------------------------------
626...ran with res=256
627[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2375: ... but an error occurred when I tried to move it to //mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg
628    [Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2382: mondo-rstr-tools.c, get_cfg_file_from_archive, 2382: cp -f /mondo.tmp.9kbM7t/./tmp/mountlist.txt //mondo.tmp.9kbM7t/./tmp/mountlist.txt
629running: cp -f /mondo.tmp.9kbM7t/./tmp/mountlist.txt //mondo.tmp.9kbM7t/./tmp/mountlist.txt > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
630--------------------------------start of output-----------------------------
631cp: '/mondo.tmp.9kbM7t/./tmp/mountlist.txt' and '//mondo.tmp.9kbM7t/./tmp/mountlist.txt' are the same file
632--------------------------------end of output------------------------------
633...ran with res=256
634[Main] mondo-rstr-tools.c->get_cfg_file_from_archive#2385: Failed to get mountlist
635running: umount /mnt/cdrom > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
636--------------------------------start of output-----------------------------
637--------------------------------end of output------------------------------
638...ran just fine. :-)
639Recovered mondo-restore.cfg
640running: cp -f ./tmp/mountlist.txt //mondo.tmp.9kbM7t/./tmp/mountlist.txt > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
641--------------------------------start of output-----------------------------
642cp: './tmp/mountlist.txt' and '//mondo.tmp.9kbM7t/./tmp/mountlist.txt' are the same file
643--------------------------------end of output------------------------------
644...ran with res=256
645running: cp -f //mondo.tmp.9kbM7t/./tmp/mondo-restore.cfg /./tmp/mondo-restore.cfg > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
646--------------------------------start of output-----------------------------
647--------------------------------end of output------------------------------
648...ran just fine. :-)
649running: cp -f //mondo.tmp.9kbM7t/./tmp/mountlist.txt /./tmp/mountlist.txt > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
650--------------------------------start of output-----------------------------
651--------------------------------end of output------------------------------
652...ran just fine. :-)
653running: cp -f etc/raidtab /etc/ > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
654--------------------------------start of output-----------------------------
655cp: cannot stat 'etc/raidtab': No such file or directory
656--------------------------------end of output------------------------------
657...ran with res=256
658running: cp -f tmp/i-want-my-lvm /tmp/ > //mondo.tmp.9kbM7t/mondo-run-prog-thing.tmp 2> //mondo.tmp.9kbM7t/mondo-run-prog-thing.err
659--------------------------------start of output-----------------------------
660--------------------------------end of output------------------------------
661...ran just fine. :-)
662    [Main] libmondo-mountlist.c->load_mountlist#950: Loading mountlist...
663    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowere1 lvm lvm 8838128
664    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerd1 lvm lvm 8838128
665    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerc1 lvm lvm 8838128
666    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowerb1 lvm lvm 8838128
667    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p3 lvm lvm 138753405
668    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/emcpowera1 lvm lvm 8838128
669    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvroot / ext3 0
670    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p1 /boot ext3 514048 /boot
671    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvhome /home ext3 0
672    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvlhome /lhome ext3 0
673    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvopt /opt ext3 0
674    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvtmp /tmp ext3 0
675    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvusr /usr ext3 0
676    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgroot/lvvar /var ext3 0
677    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest1/lvtest1 /test1 ext3 0
678    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest2/lvtest2 /test2 ext3 0
679    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest3/lvtest3 /test3 ext3 0
680    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest4/lvtest4 /test4 ext3 0
681    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/vgtest5/lvtest5 /test5 ext3 0
682    [Main] libmondo-mountlist.c->load_mountlist#1021: /dev/cciss/c0d0p2 swap swap 4096564 SW-cciss/c0d0p2
683    [Main] libmondo-mountlist.c->load_mountlist#1029: Mountlist loaded successfully.
684    [Main] libmondo-mountlist.c->load_mountlist#1031: 20 entries in mountlist
685    [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2750: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 2750: Resizing mountlist
686    [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#767: Making list of drives
687    [Main] mondo-prep.c->resize_mountlist_proportionately_to_suit_new_drives#2752: mondo-prep.c, resize_mountlist_proportionately_to_suit_new_drives, 2752: Back from MLoDiM
688[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowere: No such file or directory
689[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
690[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
691[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowere --> -1 or -1 --> -1
692    [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2658: Not resizing to match /dev/emcpowere - can't find drive
693[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerd: No such file or directory
694[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
695[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
696[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerd --> -1 or -1 --> -1
697    [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2658: Not resizing to match /dev/emcpowerd - can't find drive
698[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerc: No such file or directory
699[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
700[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
701[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerc --> -1 or -1 --> -1
702    [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2658: Not resizing to match /dev/emcpowerc - can't find drive
703[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerb: No such file or directory
704[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
705[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
706[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerb --> -1 or -1 --> -1
707    [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2658: Not resizing to match /dev/emcpowerb - can't find drive
708[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 140006 --> 140006
709Expanding entries to suit drive /dev/cciss/c0d0 (140006 MB)
710[Main] mondo-prep.c->create_mountlist_for_drive#2782: Creating list of partitions for drive /dev/cciss/c0d0
711Disk /dev/cciss/c0d0 was 140003 MB; is now 140006 MB; factor = 1.000021
712Changing /dev/cciss/c0d0p3 from 138753405 KB to 138756382 KB
713Changing /dev/cciss/c0d0p1 from 514048 KB to 514059 KB
714Changing /dev/cciss/c0d0p2 from 4096564 KB to 4096651 KB
715[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 140006 --> 140006
716
717[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowera: No such file or directory
718[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
719[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
720[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowera --> -1 or -1 --> -1
721    [Main] mondo-prep.c->resize_drive_proportionately_to_suit_new_drives#2658: Not resizing to match /dev/emcpowera - can't find drive
722Mountlist adjusted to suit current hard drive(s)
723    [Main] libmondo-mountlist.c->make_list_of_drives_in_mountlist#767: Making list of drives
724    [Main] libmondo-mountlist.c->evaluate_mountlist#571: Evaluating mountlist...
725[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowere: No such file or directory
726[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
727[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
728[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowere --> -1 or -1 --> -1
729[Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#420:  /dev/emcpowere does not exist.
730[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerd: No such file or directory
731[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
732[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
733[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerd --> -1 or -1 --> -1
734[Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#420:  /dev/emcpowerd does not exist.
735[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerc: No such file or directory
736[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
737[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
738[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerc --> -1 or -1 --> -1
739[Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#420:  /dev/emcpowerc does not exist.
740[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowerb: No such file or directory
741[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
742[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
743[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowerb --> -1 or -1 --> -1
744[Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#420:  /dev/emcpowerb does not exist.
745[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/cciss/c0d0 --> -1 or 140006 --> 140006
746    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#424: /dev/cciss/c0d0 is 140006 MB
747Looking for partition table format type
748[Main] libmondo-devices.c->which_partition_format#2828: Using /sbin/parted2fdisk
749Found MBR partition table format type
750    [Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#497:  /dev/cciss/c0d0p1 has unsupported format ext3.
751Looking for partition table format type
752[Main] libmondo-devices.c->which_partition_format#2828: Using /sbin/parted2fdisk
753Found MBR partition table format type
754Looking for partition table format type
755[Main] libmondo-devices.c->which_partition_format#2828: Using /sbin/parted2fdisk
756Found MBR partition table format type
757[Main] libmondo-devices.c->get_phys_size_of_drive#992: Error getting size of /dev/emcpowera: No such file or directory
758[Main] libmondo-devices.c->get_phys_size_of_drive#1010: Error in ioctl() getting new hard disk geometry (Bad file descriptor), resizing in unsafe mode
759[Main] libmondo-devices.c->get_phys_size_of_drive#1018: Failed to get harddisk geometry, using old mode
760[Main] libmondo-devices.c->get_phys_size_of_drive#1041: /dev/emcpowera --> -1 or -1 --> -1
761[Main] libmondo-mountlist.c->evaluate_drive_within_mountlist#420:  /dev/emcpowera does not exist.